Refining biomass residues for sustainable energy and bio-products: An assessment of technology, its importance, and strategic applications in circular bio-economy

Wheat starch processing by-products as rearing substrate for black soldier fly: does the rearing scale matter?

Rearing scale may influence black soldier fly (BSF) larvae traits when they are fed on a single diet, but different feeding substrates have not been tested yet. This study evaluated the effects of wheat starch processing by-products-based diets on growth performance, bioconversion efficiency, and nutritional profile of BSF larvae reared in different scales. Four diets (D1 and D2 [isonitrogenous, isolipidic and isoenergetic]; D3 and D4 [displaying 1:1 and 1:2 as protein to carbohydrate ratios, respectively]) were tested at 3 rearing scales (4 replicate boxes/diet, with a constant volume [0.84 cm3]/larva and feed [0.7 g]/larva): 1) small (S; 12 × 12 cm, substrate height: 4 cm, 686 6-day-old larvae (6-DOL)/box), 2) medium (M, 32 × 21 cm, substrate height: 7 cm, 5 600 6-DOL/box), and 3) large (L, 60 × 40 cm, substrate height: 7 cm, 20 000 6-DOL/box). Larval weight was recorded at the beginning of trial and every 4 days, and growth rate (GR), specific growth rate (SGR), feed conversion ratio (FCR), survival, bioconversion efficiency corrected for residue (BER), reduction rate (RR), and waste reduction index (WRI) calculated at the end of larval growth (frass DM ≥ 55%). Substrate pH, T and height were measured at the beginning, every 4 days, and end of trial. Larval proximate composition was analysed at the end of trial. Data were analysed by generalised linear mixed model (SPSS software, P < 0.05). The D1 larvae showed higher weight, GR, SGR and WRI (along with higher substrate T) than D2 at M scale, while increased SGR and FCR - as well as decreased survival, RR and WRI - were observed in D2 larvae at S scale (P < 0.05). Larval CP and ether extract (EE) contents were influenced by M and L scales only, being higher in D2 group than in D1 (P < 0.001). Differently, decreased ash was recorded in D2 larvae when reared at S and M scales, while L scale revealed higher ash in D2 group than D1 (P < 0.001). The D3 larvae displayed greater weight, SGR, survival, RR and WRI (along with greater substrate T) than D4 at M scale, with increased survival and substrate T being also highlighted in L scale (P < 0.05). The D3 larvae also showed lower DM and EE - as well as higher CP - than D4 at all the rearing scales (P < 0.001). In conclusion, D1 and D3 led to better BSF larval growth performance, bioconversion efficiency and nutritional profile mainly at M and L scales, as a consequence of their ability to facilitate larval aggregation and, in turn, allow achieving a higher substrate T.

Advancing a food loss and waste bioproduct industry: A critical review of policy approaches for application in an Australian context

Food loss and waste (FLW) contains an abundance of nutrient components that can be extracted and converted into valuable bioproducts through biorefining (e.g., pharmaceuticals, cosmetics, nutrients). Australia has identified bioproducts from a FLW feedstock as one avenue through which it can meet its commitment to UN Sustainable Development Goal Target 12.3, aiming to halve food waste by 2030. An industry for bioproducts in Australia is, however, nascent and will require targeted and sustained policy intervention to advance in line with the production targets it has set to meet Target 12.3. The aim of this critical review is threefold. Firstly, it draws on the research literature to identify barriers to advancing a bioproduct industry from FLW. Secondly, it constructs a taxonomy of policies available to overcome these barriers and support industry development. Finally, it applies the taxonomy to established policy settings in Australia (examining both national settings and Queensland state settings) and the European Union (EU), where the industry and associated policy is more mature. Australia has few national policies directly targeting a bioproduct industry. A comparative assessment of policy settings allows this review to identify lessons Australia can draw from the EU experience as it advances its own industry. Findings demonstrate a complex and fragmented policy landscape. Key recommendations from the literature emphasise the need to establish coordinated strategic instruments; target research and development opportunities for optimised, sustainable processes; and implement appropriate incentives to establish a 'level playing field', as technology readiness increases. The critical requirement for policy stability and coherence, flags the need to lay groundwork policy in this area as a priority.

Investigating chemical pre-treatment methods: Valorization of wheat straw to enhance polyhydroxyalkanoate (PHA) production with novel isolate Bacillus paranthracis RSKS-3

Wheat is a crucial food crop worldwide, generating straw upon post-harvest. The straw is often burned to enhance soil fertility, leading to massive air pollution. In this study, wheat straw was investigated for the production of Polyhydroxyalkanoate (PHA) using the novel isolate Bacillus paranthracis RSKS-3. The wheat straw was pulverized and valorized with different acids (2 % and 4 % H2SO4, acetic acid, and hydrochloric acid) and alkalis (2 % and 4 % NaOH, calcium carbonate, and potassium hydroxide). The validation of carbohydrates was done using the Molisch test by analyzing purple-ring production and the DNS test which concluded 4 % H2SO4 as an effective treatment with a maximal sugar yield of 5.04 mg/mL at P < 0.05. The bioconversion efficiency of the extract to PHA resulted in 0.87 g/L by Bacillus paranthracis RSKS-3, later characterized by Ultraviolet (UV)-spectroscopy and FT-IR assessment. The findings of the research offer a potential strategy to mitigate airborne pollutants that result from smouldering wheat straw, thereby contributing significant improvements to sustainable development.

Lignocellulosic biomass fertilizers: Production, characterization, and agri-applications

The growing focus on sustainable agriculture and optimal resource utilization has spurred investigations into lignocellulosic biomass as a potential source for producing environmentally friendly fertilizers. This paper reviews recent advancements in the production and application of innovative fertilizers derived from lignocellulose. It highlights potential in enhancing agricultural productivity and reducing environmental impacts such as carbon footprint and water pollution. The paper outlines various methods for conversion, highlighting the unique advantages of chemical, enzymatic, and microbiological processes, for converting lignocellulosic biomass into nutrient-rich fertilizers. The study compares the efficacy of lignocellulosic fertilizers to traditional fertilizers in promoting crop growth, enhancing soil health, and reducing nutrient losses. The results demonstrate the potential of lignocellulosic biomass-derived fertilizers in promoting resource efficiency and sustainable agriculture. While this research significantly contributes to the existing body of knowledge, further studies on long-term impacts and scalability are recommended for the development of innovative and sustainable agricultural practices.

Hydrogen production and pollution mitigation: Enhanced gasification of plastic waste and biomass with machine learning & storage for a sustainable future

The pursuit of carbon neutrality confronts the twofold challenge of meeting energy demands and reducing pollution. This review article examines the potential of gasifying plastic waste and biomass as innovative, sustainable sources for hydrogen production, a critical element in achieving environmental reform. Addressing the problem of greenhouse gas emissions, the work highlights how the co-gasification of these feedstocks could contribute to environmental preservation by reducing waste and generating clean energy. Through an analysis of current technologies, the potential for machine learning to refine gasification for optimal hydrogen production is revealed. Additionally, hydrogen storage solutions are evaluated for their importance in creating a viable, sustainable energy infrastructure. The economic viability of these production methods is critically assessed, providing insights into both their cost-effectiveness and ecological benefits. Findings indicate that machine learning can significantly improve process efficiencies, thereby influencing the economic and environmental aspects of hydrogen production. Furthermore, the study presents the advancements in these technologies and their role in promoting a transition to a green economy and circular energy practices. Ultimately, the review delineates how integrating hydrogen production from unconventional feedstocks, bolstered by machine learning and advanced storage, can contribute to a sustainable and pollution-free future.

Millipedes and earthworms: a comparison of their efficiency and the quality of the resulting products

ABSTRACTMillicomposting (MIL, with millipedes), vermicomposting (VER, with earthworms) and composting without invertebrates (CNT, control) were compared for the first time in a replicated controlled experiment to evaluate their efficiency and the quality of their products. Vegetal waste was degraded in small closed digesters to emulate household-scale composting. Temperature profiles were similar in the three composting types. Ninety-two days were enough to complete composting and obtain well-stabilized products (humus with C/N< 20; pH from 7 to 7.8). The mean final volume loss was about 8% higher in VER than MIL and CNT (P < 0.01) and it stabilized between the 32nd and 67th days (51.4% in VER, 43% MIL and 44% in CNT). Both invertebrates promoted gains in humus Ca content (about 34.5% higher compared to CNT), whereas the highest K and Mg contents were observed in VER humus. pH, P2O5, and S contents were also higher in VER humus than in CNT (all P < 0.05). The leachate volumes, electrical conductivity and Na+ and PO43- contents were similar (P > 0.05), while pH and contents of K+ and NH4+ were higher and NO3- was lower in VER than in MIL (all P < 0.01). This resulted in higher maturity degrees in MIL than VER (NH4+/NO3- = 0.01 and 0.93, respectively). Although all three composting types were efficient in producing mature high-quality organic fertilizers, this study showed that the addition of invertebrates improved the composting efficiency and the quality of the final products.

Sustainability analysis of orange peel biorefineries

Biorefineries are constantly evolving since new technological advances in enzyme and microbial processes are boosting research for producing new bio-based products. Nevertheless, the step towards real process implementation must overcome a series of stages based on process sustainability in the early design stages. Orange peel (OP) has been profiled as a potential raw material for producing different products. Few studies have estimated the sustainability of OP-based biorefineries considering the upstream influence on the final process performance. This research aims to perform the sustainability assessment of several OP valorization pathways based on experimental data applying the biorefinery concept. Steam distillation and polyphenolic compound extraction prior to saccharification and anaerobic digestion increase the process performance. A glucose concentration and biogas yield of 21.43 g/L (0.44 g/g OP, db) and 415 mL/g SV were obtained, respectively. An essential oil extraction yield of 1.17 g/100 g OP (db) with a d-limonene content of 91.62% was produced. Moreover, hesperidin, apigenin, and naringenin yields of 7.88 mg/g, 0.475 mg/g, and 0.675 mg/g were obtained. An OP-based biorefinery addressed to produce essential oil, polyphenolic compounds, and biogas with a processing 25 tons/day (wb) has a sustainability index of 66.88%, higher than the values obtained with lesser upstream stages. In conclusion, an integral OP upgrading leads to better enzymatic and anaerobic digestion performances, as well as, a high process sustainability.

Electric field applications enhance the electron transfer capacity of dissolved organic matter in sludge compost

Dissolved organic matter (DOM) plays an important role in heavy metal passivation and organic pollutant degradation owing to its redox ability. The structure and composition of DOM are determinants of redox ability changes during composting. Electric field-assisted aerobic composting (EAAC) has been shown to promote the degradation and humification of organic matter in compost. However, how EAAC affects the redox ability of DOM remains unclear. Hence, electron transfer capacity (ETC) of DOM extracted from EAAC was studied using the electrochemical method. Various spectral methods, such as excitation-emission matrix and ultraviolet and visible spectrophotometry were used to study the relationship of ETC with the compositional and structural changes of DOM. Results indicated that EAAC enhanced ETC of DOM at the later stage of composting, and ETC of DOM extracted from the final EAAC product was 10.4% higher than that of the control group. Spectral and correlation analyses showed that EAAC resulted in structural and compositional changes of DOM, and humification degree, aromatic compounds, molecular weight, and fulvic- and humic-like substance contents were improved in EAAC. This conversion increased ETC of DOM. Results of this study will contribute to the understanding of the redox of DOM and in expanding the application of EAAC products.

The Use of Fungi of the Trichoderma Genus in Anaerobic Digestion: A Review

Plant waste biomass is the most abundant renewable energy resource on Earth. The main problem with utilising this biomass in anaerobic digestion is the long and costly stage of degrading its complex structure into simple compounds. One of the promising solutions to this problem is the application of fungi of the Trichoderma genus, which show a high capacity to produce hydrolytic enzymes capable of degrading lignocellulosic biomass before anaerobic digestion. This article discusses the structure of plant waste biomass and the problems resulting from its structure in the digestion process. It presents the methods of pre-treatment of lignocellulose with a particular focus on biological solutions. Based on the latest research findings, key parameters related to the application of Trichoderma sp. as a pre-treatment method are discussed. In addition, the possibility of using the digestate from agricultural biogas plants as a carrier for the multiplication of the Trichoderma sp. fungi, which are widely used in many industries, is discussed.

Enhancing 1,3-Propanediol Productivity in the Non-Model Chassis Clostridium beijerinckii through Genetic Manipulation

Biotechnological processes at biorefineries are considered one of the most attractive alternatives for valorizing biomasses by converting them into bioproducts, biofuels, and bioenergy. For example, biodiesel can be obtained from oils and grease but generates glycerol as a byproduct. Glycerol recycling has been studied in several bioprocesses, with one of them being its conversion to 1,3-propanediol (1,3-PDO) by Clostridium. Clostridium beijerinckii is particularly interesting because it can produce a range of industrially relevant chemicals, including solvents and organic acids, and it is non-pathogenic. However, while Clostridium species have many potential advantages as chassis for synthetic biology applications, there are significant limitations when considering their use, such as their limited genetic tools, slow growth rate, and oxygen sensitivity. In this work, we carried out the overexpression of the genes involved in the synthesis of 1,3-PDO in C. beijerinckii Br21, which allowed us to increase the 1,3-PDO productivity in this strain. Thus, this study contributed to a better understanding of the metabolic pathways of glycerol conversion to 1,3-PDO by a C. beijerinckii isolate. Also, it made it possible to establish a transformation method of a modular vector in this strain, therefore expanding the limited genetic tools available for this bacterium, which is highly relevant in biotechnological applications.

Rice straw for energy and value-added products in China: a review

The rise of global waste and the decline of fossil fuels are calling for recycling waste into energy and materials. For example, rice straw, a by-product of rice cultivation, can be converted into biogas and by-products with added value, e.g., biofertilizer, yet processing rice straw is limited by the low energy content, high ash and silica, low nitrogen, high moisture, and high-quality variability. Here, we review the recycling of rice straw with focus on the global and Chinese energy situations, conversion of rice straw into energy and gas, biogas digestate management, cogeneration, biogas upgrading, bioeconomy, and life cycle assessment. The quality of rice straw can be improved by pretreatments, such as baling, ensiling, and co-digestion of rice straw with other feedstocks. The biogas digestate can be used to fertilize soils. The average annual potential energy of collectable rice straw, with a lower heating value of 15.35 megajoule/kilogram, over the past ten years (2013-2022) could reach 2.41 × 109 megajoule.

Biomass carbon mining to develop nature-inspired materials for a circular economy

A transition from a linear to a circular economy is the only alternative to reduce current pressures in natural resources. Our society must redefine our material sources, rethink our supply chains, improve our waste management, and redesign materials and products. Valorizing extensively available biomass wastes, as new carbon mines, and developing biobased materials that mimic nature's efficiency and wasteless procedures are the most promising avenues to achieve technical solutions for the global challenges ahead. Advances in materials processing, and characterization, as well as the rise of artificial intelligence, and machine learning, are supporting this transition to a new materials' mining. Location, cultural, and social aspects are also factors to consider. This perspective discusses new alternatives for carbon mining in biomass wastes, the valorization of biomass using available processing techniques, and the implementation of computational modeling, artificial intelligence, and machine learning to accelerate material's development and process engineering.

Critical review of biochemical pathways to transformation of waste and biomass into bioenergy

In recent years, biofuel or biogas have become the primary source of bio-energy, providing an alternative to conventionally used energy that can meet the growing energy demand for people all over the world while reducing greenhouse gas emissions. Enzyme hydrolysis in bioethanol production is a critical step in obtaining sugars fermented during the final fermentation process. More efficient enzymes are being researched to provide a more cost-effective technique during enzymatic hydrolysis. The exploitation of microbial catabolic biochemical reactions to produce electric energy can be used for complex renewable biomasses and organic wastes in microbial fuel cells. In hydrolysis methods, a variety of diverse enzyme strategies are used to promote efficient bioethanol production from various lignocellulosic biomasses like agricultural wastes, wood feedstocks, and sea algae. This paper investigates the most recent enzyme hydrolysis pathways, microbial fermentation, microbial fuel cells, and anaerobic digestion in the manufacture of bioethanol/bioenergy from lignocellulose biomass.

Aqueous phase hydrogenolysis of glycerol with in situ generated hydrogen over Ni/Al3Fe1 catalyst: effect of the calcination temperature

The present work studied the influence of the calcination temperature on the aqueous phase hydrogenolysis of glycerol with in situ generated hydrogen over a Ni/Al₃Fe₁ catalyst. The Ni/Al₃Fe₁ catalyst was synthesized by the co-precipitation method at 28 mol% of Ni (Ni/(Ni + Al + Fe)) and a molar ratio of Al/Fe of 3/1. The prepared catalyst was calcined at different temperatures (500-750 °C). The obtained samples were tested for the aqueous phase hydrogenolysis (APH) of glycerol and characterized by several analytical techniques (ICP-OES, H₂-TPR, XRD, N₂-physisorption, NH₃-TPD, STEM, FESEM, and TGA). The catalyst calcined at 625 °C was selected as the best sample due to its high acidity, metal dispersion, and catalytic activity; 1,2-propanediol was the highest carbon selectivity product. In addition, it experienced lower metal leaching than the catalyst calcined at 500 °C.

Filamentous fungi for sustainable vegan food production systems within a circular economy: Present status and future prospects

Filamentous fungi serve as potential candidates in the production of different value-added products. In the context of food, there are several advantages of using filamentous fungi for food. Among the main advantages is that the fungal biomass used food not only meets basic nutritional requirements but that it is also rich in protein, low in fat, and free of cholesterol. This speaks to the potential of filamentous fungi in the production of food that can substitute animal-derived protein sources such as meat. Moreover, life-cycle analyses and techno-economic analyses reveal that fungal proteins perform better than animal-derived proteins in terms of land use efficiency as well as global warming. The present article provides an overview of the potential of filamentous fungi as a source of food and food supplements. The commercialization potential as well as social, legal and safety issues of fungi-based food products are discussed.

Concept for the valorization of cereal processing waste: Recovery of phenolic acids by using waste-derived tetrahydrofurfuryl alcohol and biochar

Valorization of agro-food waste by converting it into a renewable resource plays a crucial role in a bio-based circular economy. Therefore, this study was designed to evaluate the suitability of distillery stillage (DS), which comes from alcohol production from cereals, for producing value-added products that can be used synergistically. The main objective was to investigate the usefulness of two substances for the recovery of phenolic acids, which have antioxidant activity, from the liquid fraction of DS: namely, tetrahydrofurfuryl alcohol (THFA) as a solvent and biochar as an adsorbent, both produced from the solid fraction of cereal processing waste. The effect of THFA concentration (80 and 100%) on phenolic acid yield in ultrasound-assisted extraction was studied. The solubilization predictions of phenolic compounds by the Hansen solubility parameters were in accordance with the experimental results: the yield of phenolic acids in the extracts was highest (3.76 μg g^-1 dry mass) with 80% THFA. Among the extracted phenolic acids, hydroxycinnamic acids predominated over hydroxybenzoic acids, which may affect the bioactive properties of the extracts and their future applications for industrial purposes. Phenolic acids from the extracts were adsorbed on 17-170 g biochar L^-1 and desorbed into water at 40-60 °C. The phenolic acid recovery was highest (∼92%) when the biochar dose was 85 g L^-1 and when desorption was performed at 50 °C. After adsorption/desorption, ∼95% of the antioxidant activity of the phenolic acids in the extracts was maintained. As biochar has a smaller specific surface area than commercial powdered activated carbon (PAC), the biochar dose should be about 5 times higher than an equivalent PAC dose for adsorption efficiency above 90%.

Xylopentose production from crop residue employing xylanase enzyme

To produce xylo-oligosaccharides (XOS) from the agriculture waste, which included, green coconut and vegetable cocktail. The two pretreatment - hydrogen peroxide-acetic acid (HP-AC) and sodium hypochlorite-sodium hydroxide (SH-SH) - were used for this study. The optimal conditions for the pretreatment were 80 °C, 4.0 % NaClO, and 2 h, followed by 0.08 % NaOH, 55 °C, and 1 h. Further enzymatic hydrolysis of green coconut (GC) and vegetable cocktail (VC) were performed and found in case of GC, the best outcomes were observed. Different types of XOS were obtained from the treated biomass whereas a single type of XOS xylo-pentose was obtained in high quantity (96.44 % and 93.09 % from CG and VC respectively) with the production of other XOS < 2 %. This study presents a reasonably secure and economical method for turning secondary crop residue into XOS and fermentable sugars.

Efficient removal of RR2 dye by electro- Ce(III) process with its elegant arts and attractive charm in performance, energy consumption and mechanism

Reactive red 2 (RR2) azo dye wastewater poses a serious hazard to the water environment health, so using a novel and efficient Electro- Ce(III) (E- Ce(III)) process takes on a critical significance in treating RR2 dye wastewater. In this study, the effects of a variety of single-factor conditions on RR2 removal efficiency were evaluated in depth. The results indicated that the optimal experimental conditions are as reaction temperature of 25 °C, Na₂SO₄ concentration of 25 mM, Ce(III) concentration of 0.3 mM, pH of 4.0, and current density of 40.0 mA/cm². When the RR2 dye wastewater was treated for 40 min under the optimal experimental conditions, a high removal rate of 99.8% for RR2 was obtained. It is suggested that the background ion PO₄^3- in the dye wastewater inhibits the E-Ce (III) process, whereas Cl- facilitates this process. Moreover, the yield of Ce(IV) increases with the increase of the current density. At the current density of 40.0 mA/cm², a reasonable energy consumption of 3.85 kW h/gTOC for the process was obtained after the 3-h treatment. The effects of different degradation processes (including Direct Electrooxidation (DEO), single Ce(III), and E-Ce (III)) on RR2 removal efficiency and TOC change were compared. The types of oxidizing substances in the E-Ce (III) process were detected, and the mechanism of RR2 oxidative degradation in the E-Ce (III) process was summarized. The result suggests that the E-Ce (III) process has low power consumption. Meanwhile, in the E-Ce (III) process, free reactive Ce(IV) with strong oxidation is continuously generated, RR2 can be efficiently degraded. And the continuous cycle transformation between Ce(III) and Ce(IV) maintains the strong oxidation of the process. The contribution of free reactive Ce(IV) and DEO to RR2 degradation was obtained as 58.8% and 39.8%, respectively. The combined effect of Ce(IV) and DEO played a major role in the E-Ce (III) process, while ·OH exhibited a relatively weak effect (nearly 1.4%). RR2 was comprised of 13 major intermediates, and the biodegradability of wastewater was improved significantly after treatment, thus facilitating the further mineralization and biodegradation of the products. The E- Ce(III) process is novel, efficient, and environment-friendly, and has a large market application space, suggesting that it can be applied as an efficient, economic, and sustainable water treatment process.

Recent advances in lignocellulosic and algal biomass pretreatment and its biorefinery approaches for biochemicals and bioenergy conversion

As the global demand for sustainable energy increases, lignocellulosic (such as agricultural residues, forest biomass, municipal waste, and dedicated energy crops) and algal (including macroalgae and microalgae) biomass have attracted considerable attention, because of their high availability of carbohydrates. This is a potential feedstock to produce biochemical and bioenergy. Pretreatment of biomass can disrupt their complex structure, increasing conversion efficiency and product yield. Therefore, this review comprehensively discusses recent advances in different pretreatments (physical, chemical, physicochemical, and biological pretreatments) for lignocellulosic and algal biomass and their biorefining methods. Life cycle assessment (LCA) which enables the quantification of the environmental impact assessment of a biorefinery also be introduced. Biorefinery processes such as raw material acquisition, extraction, production, waste accumulation, and waste conversion are all monitored under this concept. Nevertheless, there still exist some techno-economic barriers during biorefinery and extensive research is still needed to develop cost-effective processes.

Effect of surfactant assisted ultrasonic pretreatment on production of volatile fatty acids from mixed food waste

In this study, the potential effect of surfactant assisted ultrasonic pretreatment on mixed food waste was investigated. Surfactants, such as Rhamnolipid, Sodium dodecyl sulfate; Glucopon and Triton X 100 were evaluated in this work. Among them, the maximum solubilization of chemical oxygen demand of 45.5 % and the highest release of soluble COD of 31 g/L were observed for ultrasonication assisted by Triton X 100 at a dose of 0.01 g/g TS in 30 min. The presence of a surfactant also reduced 27.5 % of energy demand when compared to ultrasonic pretreatment alone. Compared to the non-pretreated samples after anaerobic digestion, ultrasonication assisted by Triton X 100 led to 95 % increase of volatile fatty acid titers and 83 % increase of carbon conversion efficiency. Thus, sonication with the addition of Triton X 100 was proven to be highly effective toward increasing digestibility of and yield of volatile fatty acid from mixed food waste.

Biotechnological Applications of Nanoencapsulated Essential Oils: A Review

Essential oils (EOs) are complex mixtures of volatile and semi-volatile organic compounds that originate from different plant tissues, including flowers, buds, leaves and bark. According to their chemical composition, EOs have a characteristic aroma and present a wide spectrum of applications, namely in the food, agricultural, environmental, cosmetic and pharmaceutical sectors. These applications are mainly due to their biological properties. However, EOs are unstable and easily degradable if not protected from external factors such as oxidation, heat and light. Therefore, there is growing interest in the encapsulation of EOs, since polymeric nanocarriers serve as a barrier between the oil and the environment. In this context, nanoencapsulation seems to be an interesting approach as it not only prevents the exposure and degradation of EOs and their bioactive constituents by creating a physical barrier, but it also facilitates their controlled release, thus resulting in greater bioavailability and efficiency. In this review, we focused on selecting recent articles whose objective concerned the nanoencapsulation of essential oils from different plant species and highlighted their chemical constituents and their potential biotechnological applications. We also present the fundamentals of the most commonly used encapsulation methods, and the biopolymer carriers that are suitable for encapsulating EOs.

Exploring the impact of biochar supplement on the dynamics of antibiotic resistant fungi during pig manure composting

The purpose of this study was to investigate antibiotic resistant fungal (ARF) communities in pig manure (PM) composting employing two different biochar (coconut shell-CSB and bamboo biochar-BB) as amendment. Three treatments (Control, 10% CSB and 10% BB) were designed and indicated with T1 to T3. Experimental results declared that the fungal abundance significantly reduced among the both biochar applied treatments but three dominant phyla Ascomycota, Basidiomycota and Mucoromycota were still relatively greater abundance present. There were significant differences (p < 0.05) in the relative abundance and diversity of fungi among all three treatments. Interestingly, biochar addition regulated the overall fungal community in final compost. Compared with the control group, the abundance of fungi was positively mobilized, and especially CSB showed a better effect. Conclusively, biochar has potential to inhibit and reduce the ARGs population and mobility in compost. Thus, these findings offer new insight to understand the succession of ARFs during PM composting.

A comprehensive review on the advances of bioproducts from biomass towards meeting net zero carbon emissions (NZCE)

This review investigates the development of bioproducts from biomass and their contribution towards net zero carbon emissions. The promising future of biomasses conversion techniques to produce bioproducts was reviewed. The advances in anaerobic digestion as a biochemical conversion technique have been critically studied and contribute towards carbon emissions mitigation. Different applications of microalgae biomass towards carbon neutrality were comprehensively discussed, and several research findings have been tabulated in this review. The carbon footprints of wastewater treatment plants were studied, and bioenergy utilisation from sludge production was shown to mitigate carbon footprints. The carbon-sinking capability of microalgae has also been outlined. Furthermore, integrated conversion processes have shown to enhance bioproducts generation yield and quality. The anaerobic digestion/pyrolysis integrated process was promising, and potential substrates have been suggested for future research. Lastly, challenges and future perspectives of bioproducts were outlined for a contribution towards meeting carbon neutrality.

Transition of bioeconomy as a key concept for the agriculture and agribusiness development: An extensive review on ASEAN countries

Transition of bioeconomy plays an important role in the development of any economy. Therefore, the purpose of the current paper is to review the key concept of transition of the bioeconomy in the ASEAN economies that is considered to be an innovative collective method for observing the operation of national economies' numerous sectors that produce and process biological wealth. Based on current literature, it has been reviewed that the transition of bioeconomy is being presented with respect to the theoretical concept, and their essence and bioeconomy size, and the challenges and risks which are related to the bioeconomy transition. The various ways and the area of action along with present strategies which are supporting the development of bio economies and their relationship with the circular economies model had been presented. It was seen in the literature that ASEAN agricultures sectors had been contributing their major part in the development of value-added products and employment, except for Malaysia, Thailand, and Laos. Moreover, the analysis results had also shown that the transition of bioeconomy is considered to be an important concept in the growth of agriculture, forestry, agribusiness, and various sectors that produce and use bio-based raw materials. It was further found that for real bio-economy opportunities, it is essential that there should be a proper national and regional strategy for the bioeconomy development in place and for the development of a proper design and proper management coordination at every level of sectors, enterprises, and provincial systems.

1-Butyl-3-methylimidazolium acetate pretreatment of giant reed triggering yield improvement of biohydrogen production via photo-fermentation

Ionic liquids (ILs) have been considered as promising alternatives to traditional reagent for lignocellulosic biomass pretreatment because of their tunable physicochemical and "green" properties. In the study, the influence of 1-Butyl-3-methylimidazolium acetate ([Bmim]acetate) pretreatment of giant reed on H2 yield improvement via photo-fermentation (PF) was evaluated. Under the optimal pretreatment conditions (6 g/L [Bmim]acetate at 70 °C for 4 h), the delignification of giant reed was up to 26.7 %. In addition, the sugar yield (9.5 g/L) and hydrogen yield (72.3 mL/g TS) from giant reed were enhanced by 1.7-fold and 61.7 % over those of untreated giant reed, respectively. Moreover, ternary analysis showed that retention time had the strongest effect on delignification, sugar yield and hydrogen yield of giant reed compared to pretreatment temperature and [Bmim]acetate loading. These experimental results indicated that [Bmim]acetate pretreatment of giant reed is an effective approach to enhance the hydrogen yield via PF.

Recent advances in biogas production using Agro-Industrial Waste: A comprehensive review outlook of Techno-Economic analysis

Agrowaste sources can be utilized to produce biogas by anaerobic digestion reaction. Fossil fuels have damaged the environment, while the biogas rectifies the issues related to the environment and climate change problems. Techno-economic analysis of biogas production is followed by nutrient recycling, reducing the greenhouse gas level, biorefinery purpose, and global warming effect. In addition, biogas production is mediated by different metabolic reactions, the usage of different microorganisms, purification process, upgrading process and removal of CO₂ from the gas mixture techniques. This review focuses on pre-treatment, usage of waste, production methods and application besides summarizing recent advancements in biogas production. Economical, technical, environmental properties and factors affecting biogas production as well as the future perspective of bioenergy are highlighted in the review. Among all agro-industrial wastes, sugarcane straw produced 94% of the biogas. In the future, to overcome all the problems related to biogas production and modify the production process.

Leads and hurdles to sustainable microbial bioplastic production

Indiscriminate usage, disposal and recalcitrance of petroleum-based plastics have led to its accumulation leaving a negative impact on the environment. Bioplastics, particularly microbial bioplastics serve as an ecologically sustainable solution to nullify the negative impacts of plastics. Microbial production of biopolymers like Polyhydroxyalkanoates, Polyhydroxybutyrates and Polylactic acid using renewable feedstocks as well as industrial wastes have gained momentum in the recent years. The current study outlays types of bioplastics, their microbial sources and applications in various fields. Scientific evidence on bioplastics has suggested a unique range of applications such as industrial, agricultural and medical applications. Though diverse microorganisms such as Alcaligenes latus, Burkholderia sacchari, Micrococcus species, Lactobacillus pentosus, Bacillus sp., Pseudomonas sp., Klebsiella sp., Rhizobium sp., Enterobacter sp., Escherichia sp., Azototobacter sp., Protomonas sp., Cupriavidus sp., Halomonas sp., Saccharomyces sp., Kluyveromyces sp., and Ralstonia sp. are known to produce bioplastics, the industrial production of bioplastics is still challenging. Thus this paper also provides deep insights on the advancements made to maximise production of bioplastics using different approaches such as metabolic engineering, rDNA technologies and multitude of cultivation strategies. Finally, the constraints to microbial bioplastic production and the future directions of research are briefed. Hence the present review emphasizes on the importance of using bioplastics as a sustainable alternative to petroleum based plastic products to diminish environmental pollution.

Recent Advances in the Bioconversion of Waste Straw Biomass with Steam Explosion Technique: A Comprehensive Review

Waste straw biomass is an abundant renewable bioresource raw material on Earth. Its stubborn wooden cellulose structure limits straw lignocellulose bioconversion into value-added products (e.g., biofuel, chemicals, and agricultural products). Compared to physicochemical and other preprocessing techniques, the steam explosion method, as a kind of hydrothermal method, was considered as a practical, eco-friendly, and cost-effective method to overcome the above-mentioned barriers during straw lignocellulose bioconversion. Steam explosion pretreatment of straw lignocellulose can effectively improve the conversion efficiency of producing biofuels and value-added chemicals and is expected to replace fossil fuels and partially replace traditional chemical fertilizers. Although the principles of steam explosion destruction of lignocellulosic structures for bioconversion to liquid fuels and producing solid biofuel were well known, applications of steam explosion in productions of value-added chemicals, organic fertilizers, biogas, etc. were less identified. Therefore, this review provides insights into advanced methods of utilizing steam explosion for straw biomass conversion as well as their corresponding processes and mechanisms. Finally, the current limitations and prospects of straw biomass conversion with steam explosion technology were elucidated.

Recent trends and advances in composting and vermicomposting technologies: A review

Composting technologies have come a long way, developing from static heaps and windrow composting to smart, artificial intelligence-assisted reactor composting. While in previous years, much attention has been paid to identifying ideal organic waste streams and suitable co-composting candidates, more recent efforts tried to determine novel process-enhancing supplements. These include various single and mixed microbial cultures, additives, bulking agents, or combinations thereof. However, there is still ample need to fine-tune the composting process in order to reduce its impact on the environment and streamline it with circular economy goals. In this review, we highlight recent advances in integrating mathematical modelling, novel supplements, and reactor designs with (vermi-) composting practices and provide an outlook for future developments. These results should serve as reference point to target adjusting screws for process improvement and provide a guideline for waste management officials and stakeholders.

Organic waste recycling for carbon smart circular bioeconomy and sustainable development: A review

The development of sustainable and low carbon impact processes for a suitable management of waste and by-products coming from different factors of the industrial value chain like agricultural, forestry and food processing industries. Implementing this will helps to avoid the negative environmental impact and global warming. The application of the circular bioeconomy (CB) and the circular economic models have been shown to be a great opportunity for facing the waste and by-products issues by bringing sustainable processing systems which allow to the value chains be more responsible and resilient. In addition, biorefinery approach coupled to CB context could offer different solution and insights to conquer the current challenges related to decrease the fossil fuel dependency as well as increase efficiency of resource recovery and processing cost of the industrial residues. It is worth to remark the important role that the biotechnological processes such as fermentative, digestive and enzymatic conversions play for an effective waste management and carbon neutrality.

Effects of different additives and aerobic composting factors on heavy metal bioavailability reduction and compost parameters: A meta-analysis

Additives are considered a promising approach to accelerate the composting process and alleviate the dissemination of pollutants to the environment. However, nearly all previous articles have focused on the impact of additive amounts on the reduction of HMs, which may not fully represent the main factor shaping HMs bioavailability status during composting. Simultaneously, previous reviews only explored the impacts, speciation, and toxicity mechanism of HMs during composting. Hence, a global-scale meta-analysis was conducted to investigate the response patterns of HMs bioavailability and compost parameters to different additives, composting duration, and composting factors (additive types, feedstock, bulking agents, and composting methods) by measuring the weighted mean values of the response ratio "[ln (RR)]" and size effect (%). The results revealed that additives significantly lessened HMs bioavailability by ≥ 40% in the final compost products than controls. The bioavailability decline rates were -40%, -60%, -57%, -55%, -42%, and -44% for Zn, Pb, Ni, Cu, Cr, and Cd. Simultaneously, additives significantly improved the total nitrogen (TN) (+16%), pH (+5%), and temperature (+5%), and decreased total organic carbon (TOC) (-17%), moisture content (MC) (-18%), and C/N ratio (-19%). Furthermore, we found that the prolongation of composting time significantly promoted the effect of additives on declining HMs bioavailability (p < 0.05). Nevertheless, increasing additive amounts revealed an insignificant impact on decreasing the HMs bioavailability (p > 0.05). Eventually, using zeolite as an additive, chicken manure as feedstock, sawdust as a bulking agent, and a reactor as composting method had the most significant reduction effect on HMs bioavailability (p < 0.05). The findings of this meta-analysis may contribute to the selection, modification, and application of additives and composting factors to manage the level of bioavailable HMs in the compost products.

Black soldier fly larvae for organic manure recycling and its potential for a circular bioeconomy: A review

Livestock farming and its products provide a diverse range of benefits for our day-to-day life. However, the ever-increasing demand for farmed animals has raised concerns about waste management and its impact on the environment. Worldwide, cattle produce enormous amounts of manure, which is detrimental to soil properties if poorly managed. Waste management with insect larvae is considered one of the most efficient techniques for resource recovery from manure. In recent years, the use of black soldier fly larvae (BSFL) for resource recovery has emerged as an effective method. Using BSFL has several advantages over traditional methods, as the larvae produce a safe compost and extract trace elements like Cu and Zn. This paper is a comprehensive review of the potential of BSFL for recycling organic wastes from livestock farming, manure bioconversion, parameters affecting the BSFL application on organic farming, and process performance of biomolecule degradation. The last part discusses the economic feasibility, lifecycle assessment, and circular bioeconomy of the BSFL in manure recycling. Moreover, it discusses the future perspectives associated with the application of BSFL. Specifically, this review discusses BSFL cultivation and its impact on the larvae's physiology, gut biochemical physiology, gut microbes and metabolic pathways, nutrient conservation and global warming potential, microbial decomposition of organic nutrients, total and pathogenic microbial dynamics, and recycling of rearing residues as fertilizer.

Succession of the Bacterial Communities and Functional Characteristics in Sheep Manure Composting

Bacterial community is a key factor affecting aerobic composting, and understanding bacterial community succession is important to revealing the mechanism of organic matter degradation. In this study, the succession and metabolic characteristics of bacterial communities were explored in 45 days composting of sheep manure and wheat straw by using high-throughput sequencing technology and bioinformatics tools, respectively. Results showed that the alpha diversity of bacterial community significantly decreased in the thermophilic (T2) phase and then recovered gradually in the bio-oxidative (T3) and the maturation (T4) phases. Bacterial communities varied at different stages, but there were 158 genera in common bacterial species. Unclassified_f_Bacillaceae, Oceanobacillus, Bacillus, Pseudogracilibacillus, and Nocardiopsis were identified as keystone bacterial genera. Eleven genera were significantly correlated (p < 0.05), or even extremely significantly correlated (p < 0.001), with the physicochemical factors. Redundancy analysis (RDA) showed that changes of bacterial community diversity correlated with physicochemical factors. The highest relative abundances were amino acid and carbohydrate metabolism among the metabolic groups in the compost. These results will provide theoretical support for further optimizing sheep manure composting conditions and improving the quality of organic fertilizers.

Enhanced biogas production from food waste and activated sludge using advanced techniques - A review

Biogas generation using food waste anaerobic co-digestion with activated sludge provides a cleaner addressable system, an excellent solution to global challenges, the increasing energy demands, fuel charges, pollution and wastewater treatment. Regardless of the anaerobic digestate end product values, the technology lacks efficiency and process instability due to substrate irregularities. Process parameters and substrate composition, play a vital role in the efficiency and outcome of the system. Intrinsic biochar properties such as pore size, specific surface properties and cation exchange capacity make it an ideal additive that enriches microbial functions and enhances anaerobic digestion. The pretreatment and co-digestion of food waste and activated sludge are found to be significant for efficient biogas generation. The advantages, drawbacks, limitations, and technical improvements are covered extensively in the present review besides the recent advancement in the anaerobic digestion system.

Scaled-up multi-anode shared cathode microbial fuel cell for simultaneous treatment of multiple real wastewaters and power generation

Microbial fuel cell (MFC) is lauded for its capacity to valorize organic substrates in wastes, providing a solution to environmental pollution and energy crisis. While different types of organic substrates affect removal efficiency and current output, most MFCs are designed to only be able to utilize one type of wastewater. However, many real wastewater treatment sites generate more than one type of wastewater which hinders the installation of most MFCs. This study aimed to investigate the performance of the novel-designed multi-anode shared cathode MFC (MASC-MFC) compared with a standard single anode/cathode MFC (SAC-MFC) and the simultaneous treatment of different types of real wastewaters (sewage, slaughterhouse, and hospital) in one MFC unit. The MASC-MFC (9025 mW/m² at 23.332 mA/m²) produced 1.7 times and 1.6 times higher in power density and current density and 2.2 times lower in internal resistance than the standard single anode/cathode MFC (SAC-MFC). A maximum COD removal efficiency of 62.7% was achieved with synthetic wastewater. Feeding the MASC-MFC with multiple real wastewaters decreased maximum power density 3.5 (2599 mW/m²) times and increased internal resistance 2.7 times. Stable current generation 1.575 mA was achieved over 300 h despite the different and complex wastewater physio-chemical compositions. The MASC-MFC achieved over 40% and approximately 30% coulombic efficiency independently in all the anode chambers irrespective of the type of real wastewater used, demonstrating the MASC-MFC's capacity to treat different real wastewaters with the added benefit of electricity production.

Catalytic pyrolysis of lignocellulosic biomass for bio-oil production: A review

Catalytic pyrolysis has been widely explored for bio-oil production from lignocellulosic biomass owing to its high feasibility and large-scale production potential. The aim of this review was to summarize recent findings on bio-oil production through catalytic pyrolysis using lignocellulosic biomass as feedstock. Lignocellulosic biomass, structural components and fundamentals of biomass catalytic pyrolysis were explored and summarized. The current status of bio-oil yield and quality from catalytic fast pyrolysis was reviewed and presented in the current review. The potential effects of pyrolysis process parameters, including catalysts, pyrolysis conditions, reactor types and reaction modes on bio-oil production are also presented. Techno-economic analysis of full-scale commercialization of bio-oil production through the catalytic pyrolysis pathway was reviewed. Further, limitations associated with current practices and future prospects of catalytic pyrolysis for production of high-quality bio-oils were summarized. This review summarizes the process of bio-oil production from catalytic pyrolysis and provides a general scientific reference for further studies.

Analysis of Material-Characterization Properties of Post-Production Waste—The Case of Apple Pomace

The paper presents the material-characterization properties of apple pomace—the post-production waste of juice pressing. Tests were carried out on the basic physical properties of apple pomace: color, specific-density, and energy properties. Extensive material-composition analyses based on DSC (differential scanning calorimetry) and TGA (thermogravimetry) methods were also performed. It has been shown that pomace, due to its energy value, can be a good fuel. The obtained thermal data confirm the presence of cellulose, hemicelluloses, lignins and pectins in the analyzed pomace. The results confirm that dried apple pomace is microbiologically stable with good health-promoting properties.

Genetic manipulation strategies for ethanol production from bioconversion of lignocellulose waste

Lignocellulose waste was served as promising raw material for bioethanol production. Bioethanol was considered to be a potential alternative energy to take the place of fossil fuels. Lignocellulosic biomass synthesized by plants is regenerative, sufficient and cheap source for bioethanol production. The biotransformation of lignocellulose could exhibit dual significance-reduction of pollution and obtaining of energy. Some strategies are being developing and increasing the utilization of lignocellulose waste to produce ethanol. New technology of bioethanol production from natural lignocellulosic biomass is required. In this paper, the progress in genetic manipulation strategies including gene editing and synthetic genomics for the transformation from lignocellulose to ethanol was reviewed. At last, the application prospect of bioethanol was introduced.

Perspectives on the microorganism of extreme environments and their applications

•

The applications of extremophiles in various fields like biotechnology, biodegradation, bioremediation, biorefinery and astrobiology along with other industries like pharmaceuticals, food, agricultural, cosmetics, and textile.

•

Further research in biodegradation, bioremediation and generation of biofuels using extremophiles is required considering the current climate crisis as it helps in reduction of environmental contamination load.

•

The importance of promoting the use of extremophiles in food and agricultural industries and how extremophiles can be the key to achieving the Sustainable Development Goal of global food security.

•

Keeping in mind the current global scenario with regards to the Covid-19 pandemic, our paper also focuses on the importance of by-products of extremophiles like biosurfactants in the vaccine production process.

•

For advancement of the astrobiology sector, more PFA sites should be located and the extremophiles inhabiting them should be studied.

Extremophiles are organisms that can survive and thrive in conditions termed as “extreme” by human beings. Conventional methods cannot be applied under extreme conditions like temperature and pH fluctuations, high salinity, etc. for a variety of reasons. Extremophiles can function and are adapted to thrive in these environments and are sustainable, cheaper, and efficient, therefore, they serve as better alternatives to the traditional methods. They adapt to these environments with biochemical and physiological changes and produce products like extremolytes, extremozymes, biosurfactants, etc., which are found to be useful in a wide range of industries like sustainable agriculture, food, cosmetics, and pharmaceuticals. These products also play a crucial role in bioremediation, production of biofuels, biorefinery, and astrobiology. This review paper comprehensively lists out the current applications of extremophiles and their products in various industries and explores the prospects of the same. They help us understand the underlying basis of biological mechanisms exploring the boundaries of life and thus help us understand the origin and evolution of life on Earth. This helps us in the research for extra-terrestrial life and space exploration. The structure and biochemical properties of extremophiles along with any possible long-term effects of their applications need to be investigated further.

Organic solid waste: Biorefinery approach as a sustainable strategy in circular bioeconomy

Waste generation is associated with numerous environmental consequences, making it a point of discussion in the environmental arena. Efforts have been made around the world to develop a systematic management approach coupled with a sustainable treatment technology to maximize resource utilization of organic solid waste. Biorefineries and bio-based products play a critical role in lowering total emissions and supporting energy systems. However, economic viability of biorefineries, on the other hand, is a stumbling hurdle to their commercialization. This communication provides a thorough study of the concept of biorefinery in waste management, as well as technological advancements in this field. In addition, the notion of techno-economic assessment, as well as challenges and future prospects have been covered. To find the most technologically and economically viable solution, further techno-economic study to the new context is required. Overall, this communication would assist decision-makers in identifying environmentally appropriate biorefinery solutions ahead of time.

Valorisation of algal biomass to value-added metabolites: emerging trends and opportunities

Algal biomass is a promising feedstock for sustainable production of a range of value-added compounds and products including food, feed, fuel. To further augment the commercial value of algal metabolites, efficient valorization methods and biorefining channels are essential. Algal extracts are ideal sources of biotechnologically viable compounds loaded with anti-microbial, anti-oxidative, anti-inflammatory, anti-cancerous and several therapeutic and restorative properties. Emerging technologies in biomass valorisation tend to reduce the significant cost burden in large scale operations precisely associated with the pre-treatment, downstream processing and waste management processes. In order to enhance the economic feasibility of algal products in the global market, comprehensive extraction of multi-algal product biorefinery is envisaged as an assuring strategy. Algal biorefinery has inspired the technologists with novel prospectives especially in waste recovery, carbon concentration/sequestration and complete utilisation of the value-added products in a sustainable closed-loop methodology. This review critically examines the latest trends in the algal biomass valorisation and the expansive feedstock potentials in a biorefinery perspective. The recent scope dynamics of algal biomass utilisation such as bio-surfactants, oleochemicals, bio-stimulants and carbon mitigation have also been discussed. The existing challenges in algal biomass valorisation, current knowledge gaps and bottlenecks towards commercialisation of algal technologies are discussed. This review is a comprehensive presentation of the road map of algal biomass valorisation techniques towards biorefinery technology. The global market view of the algal products, future research directions and emerging opportunities are reviewed.