Responses of soil microbial communities to weak electric fields

Construction of an effective method combining in situ capping with electric field-enhanced biodegradation for treating PAH-contaminated soil at abandoned coking sites

The simultaneous application of in situ capping and electro-enhanced biodegradation may be a suitable method for ensuring the feasibility and safety of reusing abandoned coking sites. However, the capping layer type and applied electric field pattern may affect the efficiency of sequestering and removing pollutants. This study investigated changes in electric current, soil moisture content and pH, polycyclic aromatic hydrocarbon (PAH) concentration, bacterial number, and microbial community structure and metabolic function during soil remediation at abandoned coking plant sites under different applied electric field patterns and barrier types. The results indicated that polarity-reversal electric field was more conducive to maintaining electric current, soil properties, resulting in higher microbial number, community diversity, and functional gene abundance. At 21d, the mean PAH concentrations in contaminated soil, the capping layer's clean soil and barrier were 78.79, 7.56, and 1.57 mg kg-1 lower than those with a unidirectional electric field, respectively. The mean degradation rate of PAHs in the bio-barrier was 10.12 % higher than that in the C-Fe barrier. In the experiment combining a polarity-reversal electric field and a bio-barrier, the mean PAH concentrations in contaminated soil and the capping layer were 706.68 and 27.15 mg kg-1 lower than those in other experiments, respectively, and no PAHs were detected in the clean soil, demonstrating that the combination of the polarity-reversal electric field and the bio-barrier was effective in treating soil at abandoned coking plant sites. The established method of combining in situ capping with electro-enhanced biodegradation will provide technical support for the treatment and reuse of heavily PAH-contaminated soil at abandoned coking plant sites.

Effect of electrokinetic process on in situ stabilization and detoxification of arsenic-contaminated soil with high content of calcium

Owing to the high risk of human exposure to arsenic-contaminated soil, reducing its toxicity is essential. This study used the electrokinetic (EK) process with iron-rich electrodes to synchronously achieve the accumulate, stabilize and detoxify soil arsenic. Changes in arsenic valence, leaching toxicity, and microbial communities related to toxicity were comprehensively considered. The results demonstrated that arsenic was mainly transported toward the anode and accumulated by electromigration owing to the negatively charged arsenic anions under EK conditions. The cathode approaching effectively promote arsenic movement to the anode; the largest As(T) transportation rate of 30.61% was achieved near the cathode (S4). The transportation ratio of As(III) was 1.84 times more than that of As(V). The As(III) content and leaching toxicity of soil arsenic in all treatments decreased after applying the EK process. In particular, the anode approaching effectively elevated the average ratios of soil As(III) oxidation and stabilization to 37.88% and 61.73%, respectively. Correspondingly, the total phospholipid fatty acid content increased substantially after EK treatment and showed a pollution stress elimination effect. The electrokinetic effect can essentially cause highly active and easily migrated arsenic to accumulate near the anode and middle sections. The electric field mediated iron mineralization and stabilized arsenic by oxidizing As(III) and reacting with newly formed iron-rich phases (S). Meanwhile, the electric field regulated the form of soil calcium from CaCO3 to CaSO4 and caused calcium-bound arsenic to change to a more stable form. According to these results, in situ stabilization and detoxification of arsenic-contaminated soil can be realized by the EK process, avoiding stabilizer addition and excavation.

Electric field as extracellular enzyme activator promotes conversion of lignocellulose to humic acid in composting process

To promote efficient conversion of lignocellulose to humus (HS) during composting, a novel bio-electrochemical technology was applied and explored the effect and mechanism of electrification on carbon conversion during different composting periods. The results showed that supplementary electric field played different roles during composting. In the early stage, organic matter mineralization was significantly accelerated under electric field application, that was embodied in a 29.8% increase of CO2 emission due to the enhanced metabolic activity of microorganisms. However, the electric field functioned as an extracellular enzyme activator during the later stage since the abundance of functional microorganisms related to lignocellulose degradation was increased by 1.5-2.8 fold that effectively promoted the conversion of lignocellulose to HS. The humic acid content of the compost products increased by 23.0-32.9% compared with control. This study elucidated how electric fields affect carbon conversion during composting, which provides a novel strategy for returning agricultural wastes to soil.

Effect of electric fields strength on soil factors and microorganisms during electro-bioremediation of benzo[a]pyrene-contaminated soil

Electro-bioremediation is a promising technology for remediating soils contaminated with polycyclic aromatic hydrocarbons (PAHs). However, the resulting electrokinetic effects and electrochemical reactions may inevitably cause changes in soil factors and microorganism, thereby reducing the remediation efficiency. To avoid negative effect of electric field on soil and microbes and maximize microbial degradability, it is necessary to select a suitable electric field. In this study, artificial benzo [a]pyrene (BaP)-contaminated soil was selected as the object of remediation. Changes in soil factors and microorganisms were investigated under the voltage of 1.0, 2.0, and 2.5 V cm-1 using chemical analysis, real-time PCR, and high-throughput sequencing. The results revealed noticeable changes in soil factors (pH, moisture, electrical conductivity [EC], and BaP concentration) and microbes (PAHs ring-hydroxylating dioxygenase [PAHs-RHDα] gene and bacterial community) after the application of electric field. The degree of change was related to the electric field strength, with a suitable strength being more conducive to BaP removal. At 70 d, the highest mean extent of BaP removal and PAHs-RHDα gene copies were observed in EK2.0 + BIO, reaching 3.37 and 109.62 times those in BIO, respectively, indicating that the voltage of 2.0 V cm-1 was the most suitable for soil microbial growth and metabolism. Changes in soil factors caused by electric fields can affect microbial activity and community composition. Redundancy analysis revealed that soil pH and moisture had the most significant effects on microbial community composition (P < 0.05). The purpose of this study was to determine the appropriate electric field that could be used for electro-bioremediation of PAH-contaminated soil by evaluating the effects of electric fields on soil factors and microbial communities. This study also provides a reference for efficiency enhancement and successful application of electro-bioremediation of soil contaminated with PAHs.

Effects of soil organic carbon metabolism on electro-bioremediation of petroleum-contaminated soil

Soil organic carbon (SOC) potentially interacts with microbial metabolism and may affect the degradation of petroleum-derived carbon (PDC) in the electro-bioremediation of petroleum-contaminated soil. This study evaluated the interactions among organic carbon, soil properties, and microbial communities to explore the role of SOC during the electro-bioremediation process. The results showed that petroleum degradation exerted superposition and synergistic electrokinetic and bioremediation effects, as exemplified by the EB and EB-PR tests, owing to the maintenance and enhancement of SOC utilization (P/S value), respectively. The highest P/S value (2.0-2.4) was found in the electrochemical oxidation zone due to low SOC consumption. In the biological oxidation zones, electric stimulation enhanced the degradation of PDC and SOC, with higher average P/S values than those of the Bio test. Soil pH, Eh, inorganic ions, and bioavailable petroleum fractions were the main factors reshaping the microbial communities. SOC metabolism effectively buffered the stress of environmental factors and pollutants while maintaining functional bacterial abundance, microbial alpha diversity, and community similarity, thus saving the weakened PDC biodegradation efficiency in the EB and EB-PR tests. The study of the effect of SOC metabolism on petroleum biodegradation contributes to the development of sustainable low-carbon electro-bioremediation technology.

Treatment of PAHs contaminated soil in abandoned industrial site using combined method of improved in situ capping and electrokinetic enhanced-bioremediation

In situ capping and bioremediation are common technologies for treating contaminated soil at industrial sites. However, these two technologies have some shortcomings for treating soil heavily contaminated with organic matter, such as the limited adsorption in capping layer and the low biodegradation efficiency. This study proposed the method of an improved in situ capping combined with electrokinetic enhanced-bioremediation, and investigated its feasibility for treating heavily polycyclic aromatic hydrocarbons (PAHs) contaminated soil at an abandoned industrial site. By analyzing the changes in soil properties, PAHs concentration, and microbial community in experiments with voltages of 0, 0.8, 1.2, and 1.6 V cm^-1, it was found that improved in situ capping could effectively sequester PAHs migration by adsorption and biodegradation, and electric field could enhance PAHs removal from contaminated soil and bio-barrier. In the experiments with electric field, soil environment under the voltage of 1.2 V cm^-1 was more favorable for the growth and metabolism of microorganisms, and the residual PAHs concentrations (19.47 ± 0.76 mg kg^-1 and 619.38 ± 20.05 mg kg^-1) in the bio-barrier and contaminated soil of experiment with 1.2 V cm^-1 were the lowest, which indicated that optimization of the electric field conditions could lead to better effects.

Electrokinetic-Enhanced Bioremediation of Trichloroethylene-Contaminated Low-Permeability Soils: Mechanistic Insight from Spatio-Temporal Variations of Indigenous Microbial Community and Biodehalogenation Activity

Electrokinetic-enhanced bioremediation (EK-Bio), particularly bioaugmentation with injection of biodehalogenation functional microbes such as Dehalococcoides, has been documented to be effective in treating a low-permeability subsurface matrix contaminated with chlorinated ethenes. However, the spatio-temporal variations of indigenous microbial community and biodehalogenation activity of the background matrix, a fundamental aspect for understanding EK-Bio, remain unclear. To fill this gap, we investigated the variation of trichloroethylene (TCE) biodehalogenation activity in response to indigenous microbial community succession in EK-Bio by both column and batch experiments. For a 195 day EK-Bio column (∼1 V/cm, electrolyte circulation, lactate addition), biodehalogenation activity occurred first near the cathode (<60 days) and then spread to the anode (>90 days), which was controlled by electron acceptor (i.e., Fe(III)) competition and microbe succession. Amplicon sequencing and metagenome analysis revealed that iron-reducing bacteria (Geobacter, Anaeromyxobacter, Geothrix) were enriched within initial 60 d and were gradually replaced by organohalide-respiring bacteria (versatile Geobacter and obligate Dehalobacter) afterward. Iron-reducing bacteria required an initial long time to consume the competitive electron acceptors so that an appropriate reductive condition could be developed for the enrichment of organohalide-respiring bacteria and the enhancement of TCE biodehalogenation activity.

Bacterial survival strategies in sludge alkaline fermentation for volatile fatty acids production: Study on the physiological properties, temporal evolution and spatial distribution of bacterial community

This study investigated the dynamics of ATP synthase activity, phospholipid fatty acid (PLFA) profile, and temporal evolution and spatial distribution of bacterial community to analyze bacterial survival strategies in sludge alkaline fermentation (SAF) for volatile fatty acids (VFAs) production. The results revealed a significant increase in ATP synthase activity at pH 9 and 10 (p < 0.05), which could contribute to proton entry into cells and benefit bacterial survival. PLFA analysis indicated that the unsaturated fatty acids content increased with the increase of pH. Firmicutes were the dominant microorganisms in the running stage of the pH 10 reactor (35.81-62.34%) and might have been the key microbes that influenced VFAs production. Further analysis of the spatial distribution of microbial community suggested that Firmicutes mainly lived inside flocs during SAF. These findings provide an understanding for bacterial survival strategies in SAF, which could help to develop methods to further improve VFAs yield.

Alternating current enhanced bioremediation of petroleum hydrocarbon-contaminated soils

In this work, bioremediation was applied with sinusoidal alternating current (AC) electric fields to remove petroleum hydrocarbon (TPH) for soil remediation. Applying AC electric field with bioremediation (AC+BIO) could efficiently remove 31.6% of the TPH in 21 days, much faster than that in the BIO only system (13.7%) and AC only system (5.5%). When the operation time extended to 119 days, the AC+BIO system could remove 73.3% of the TPH. Applying AC electric field (20-200 V/m) could maintain the soil pH at neutral, superior to the direct current electric field. The maximum difference between soil temperature and the room temperature was 1.9 °C in the AC (50 V/m) +BIO system. The effects of AC voltage gradient (20-200 V/m) on the microorganisms and TPH degradation efficiency by AC+BIO were investigated, and the optimized AC voltage gradient was assessed as 50 V/m for lab-scale experiments. The microbial community structures in the BIO and AC+BIO systems were compared. Although Pseudomonas was the dominant species, Firmicutes became more abundant in the AC+BIO system than the BIO system, indicating their adaptive capacity to the stress of the AC electric field. Real petroleum-contaminated soil was used as a reaction matrix to evaluate the performance of AC+BIO in the field. The initial current density was about 0.2 mA/cm², voltage gradient was about 20 V/m, and the average TPH degradation rate was 8.1 μg/g_{dry soil} per day. This study provided insights and fundamental supports for the applications of AC+BIO to treat petroleum-polluted soils.

The influence of electrokinetic bioremediation on subsurface microbial communities at a perchloroethylene contaminated site

There is an increased interest in finding remedies for contamination in low permeability and advection-limited aquifers. A technology applicable at these sites, electrokinetic-enhanced bioremediation (EK-BIO), combines traditional bioremediation and electrokinetic technologies by applying direct current to transport bioremediation amendments and microbes in situ. The effect of this technology on the native soil microbial community has only been previously investigated at the bench scale. This research explored the influence of EK-BIO on subsurface microbial communities at a field-scale demonstration site. The results showed that, similar to the findings in laboratory studies, alpha diversity decreased and beta diversity differed temporally, based on treatment phase. Enrichments in specific taxa were linked to the bioaugmentation culture and electron donor. Overall, findings from our study, one of the first field-scale investigations of the influence of electrokinetic bioremediation on subsurface microbial communities, are very similar to bench-scale studies on the topic, suggesting good correlation between laboratory and field experiments on EK-BIO and showing that lessons learned at the benchtop are important and relevant to field-scale implementation. KEY POINTS: • Microbial community analysis of field samples validates laboratory study results • Bioaugmentation cultures and electron donors have largest effect on microbial community.

Bioremediation of polycyclic aromatic hydrocarbons contaminated soil under the superimposed electric field condition

An innovative superimposed electric field (SEF) was designed with the aim to achieve uniform removal of polycyclic aromatic hydrocarbons (PAHs) in soil. Also the influence of SEF on the bioremediation efficiency of PAHs was investigated in compared with the common electric field (CEF). Five experiments were conducted in this study, namely EK-CEF (applied CEF), EKB-CEF (CEF enhanced bioremediation), EK-SEF (applied SEF), EKB-SEF (SEF enhanced bioremediation), and Bio (bioremediation). The results indicated that electric field with periodically reversed polarity could effectively prevent the occurrence of large changes in soil pH, temperature, and electric current. The electric field intensity of SEF was concentrated in the range of 0.5-1.5 V/cm, and the difference between the maximum and minimum PAHs removal percentage in EK-SEF was just 5.4%, in comparison to 14.8% in EK-CEF. The bioremediation promoting effect did not show significant difference between SEF and CEF. Compared to Bio, the removal percentages of the 5-ring and 6-ring PAHs attributed to the degrading bacteria were much higher in EKB-SEF and EKB-CEF. Moreover, the microbial number increased with the distance away from electrodes, and the microbial community changed correspondingly. All these would be resulted in differences removal efficiencies among different PAHs components. Despite its intrinsic advantages, the influence of SEF on soil physicochemical and biological properties needs further study.

Changes of microbial community and activity under different electric fields during electro-bioremediation of PAH-contaminated soil

Electro-bioremediation is a promising technology for remediation of soil contaminated with persistent organic compounds such as polycyclic aromatic hydrocarbons (PAHs). During electro-bioremediation, electrical fields have been shown to increase pollutant degradation. However, it remains unclear whether there is an optimal strength for the electrical field applied that is conductive to the maximum role played by microbes. This study aimed to determine the optimal strength of electric field through the analysis of the effects of different voltages on the microbial community and activity. Four bench-scale experiments with voltages of 0, 1, 2 and 3 V cm^-1 were conducted for 90 days in an aged PAH-contaminated soil. The spatiotemporal changes of the soil pH, moisture content and temperature, microbial biomass and community structure, and the degradation extent of PAHs were researched over 90 days. The results indicated that the total microbial biomass and degradation activity were highest at voltages of 2 V cm^-1. The concentration of total phospholipid fatty acids, used to quantify soil microbial biomass, reached 65.7 nmol g^-1 soil, and the mean degradation extent of PAHs was 44.0%. Similarly, the maximum biomass of actinomycetes, bacteria and fungus also occurred at the voltage of 2 V cm^-1. The Gram-positive/Gram-negative and (cy17:0+cy 19:0)/(16:1ω7+18:1ω7) ratios also showed that the intensity of electric field and electrode reactions strongly influenced the microbial community structure. Therefore, to optimize the electro-bioremediation of PAH-contaminated soil, the strength of electric field needs to be selected carefully. This work provides reference for the development of novel electrokinetically enhanced bioremediation processes.

Change in soil ion content and soil water-holding capacity during electro-bioremediation of petroleum contaminated saline soil

This study investigated changes in soil ion content and soil water-holding capacity during electro-bioremediation (EK-Bio) of petroleum contaminated saline soil (ion content of 3.92 g/kg). The results indicated that the soil ions surrounded the electrodes with increasing time, thus changing the soil water-holding capacity. According to the Van Genuchten model fitting results, the soil residual water content (θr) increased with the soil ion content, which represented a capacity decrease of the soil water supply. At the end of the EK-Bio experiment, the θr values in the soil near (site A) and far from (site B) the electrodes were 19.1 % and 12.1 %, where the soil ion content was 7.92 g/kg and 0.55 g/kg, respectively. The ion aggregation process significantly impacted the growth of soil microbial. The bacteria numbers decreased when the soil ion content was high (7.41 g/kg, site A) and low (0.84 g/kg, site B) after 70 days of treatment. The applied electric field significantly enhanced the bioremediation efficiency. However, the biodegradation promotion effect was the weakest at site A. The synergistic effect between the applied electric field and degrading bacteria was delayed.

Electrokinetic effects on the interaction of phenanthrene with geo-sorbents

Interactions with solid matrices control the persistence and (bio-)degradability of hydrophobic organic chemicals (HOC). Approaches influencing the rate or extent of HOC interactions with matrices are thus longed for. When a direct current (DC) electric field is applied to a matrix immersed in an ionic solution, it invokes transport processes including electromigration, electrophoresis, and electroosmotic flow (EOF). EOF is the surface charge-induced movement of pore fluids. It has the potential to mobilize uncharged organic contaminants and, hence, to influence their interactions with sorbing geo-matrices (i.e. geo-sorbents). Here, we assessed the effects of weak DC electric fields on sorption and desorption of phenanthrene (PHE) in various mineral and carbonaceous geo-sorbents. We found that DC fields significantly changed the rates and extent of PHE sorption and desorption as compared to DC-free controls. A distinct correlation between the Gibbs free energy change (ΔG°) and electrokinetic effects such as the EOF velocity was observed; in case of mineral sorbents EOF limited (or even inhibited) PHE sorption and increased its desorption. In strongly sorbing carbonaceous geo-sorbents, however, EOF significantly increased the rates of PHE sorption and reduced PHE desorption by > 99% for both activated charcoal and exfoliated graphite. Based on our findings, an approach linking ΔG° and EOF velocity was developed to estimate DC-induced PHE sorption and desorption benefits on mineral and carbonaceous sorbents. We conclude that such kinetic regulation gives rise to future technical applications that may allow modulating sorption processes e.g. in response to fluctuating sorbate concentrations in contaminated water streams.

A journey in the complex interactions between electrochemistry and bacteriology: From electroactivity to electromodulation of bacterial biofilms

Although the term bioelectrochemistry tends to be associated with animal and human tissues, bioelectric currents exist also in plants and bacteria. Especially the latter, when agglomerated in the form of biofilms, can exhibit electroactivity and susceptibility to electrical stimulation. Therefore, electrochemical methods appear to become powerful techniques to expand the conventional strategies of biofilm characterization and modification. In this review, we aim to provide the insight into the electrochemical behaviour of bacteria and present the variety of electrochemical techniques that can be used either for the non-destructive monitoring of bacterial communities or modulation of their growth. The most common applications of electrical stimulation on biofilms are presented, including the prevention of bacterial growth by charging the surface of the materials, changing the direction of bacterial movement under the influence of the electric field and increasing of the potency of antibiotics when bactericides are coupled with the electric field. Also, the industrial applications of microbial electro-technologies are described, such as bioremediation, wastewater treatment, and microbial fuel cells. Consequently, we are showing the complexity of interactions that exist between electrochemistry and bacteriology that can be used for the benefit of these two disciplines.

Effect of continuous and intermittent electric current on lignin wastewater treatment and microbial community structure in electro-microbial system

In this study, complex structured soluble lignin wastewater was treated by electro-microbial system (EMS) using different direct current (DC) application modes (CR (continuous ON), IR_12h (12 h-ON/12 h-OFF) and IR_2h (2 h-ON/2 h-OFF)), and physiological characteristics and microbial communities were investigated. Results showed that CR, IR_12h and IR_2h had higher lignin removals, which were almost two times that of the control reactor (R₀′, no current), and IR_2h performed best and stably. Furthermore, IR_2h exhibited the lowest ohmic resistance (Rs) of electrode biofilms, which could be explained by its higher abundance of electroactive bacteria. In the activated sludge of EMS, the concentration of dehydrogenase activity (DHA) and electronic transport system (ETS) in IR_2h were the highest (1.48 and 1.28 times of R₀′), which contributed to its high content of adenosine triphosphate (ATP). The viability of activated sludge was not affected by different DC application modes. Phospholipid fatty acids (PLFA) analysis indicated that IR_2h had the maximum content of C15:1 anteiso A, C16:0 and C18:0; CR increased the content of C15:0 anteiso and decreased the content of saturated fatty acids. Genus-level results revealed that lignin-degrading bacteria, Pseudoxanthomonas and Mycobacterium, could be enriched in IR_2h and CR, respectively.

Novel Bacillus cereus strain from electrokinetically remediated saline soil towards the remediation of crude oil

A new strain SWH-15 was successfully isolated after initial electrokinetic remediation experiment using the same saline soil sampled from Shengli Oilfield, China. Four methods (morphological and biochemical characteristics, whole-cell fatty acid methyl esters (FAMEs) analysis, 16S rRNA sequence analysis and DNA G + C content and DNA-DNA hybridization analysis) were used to identify the taxonomic status of SWH-15 and confirmed that SWH-15 was a novel species of the Bacillus (B.) cereus group. Then, we assessed the degrading ability of the novel strain SWH-15 to crude oil through a microcosm experiment with four treatments, including control (CK), bioremediation using SWH-15 (Bio), electrokinetic remediation (EK), and combined bioremediation and electrokinetic remediation (Bio + EK). The results showed that the Bio + EK combined remediation treatment was more effective than the CK, Bio, and EK treatments in degrading crude oil contaminants. Bioaugmentation, by addition of the strain SWH-15 had synergistic effect with EK in Bio + EK treatment. Bacterial community analysis showed that electrokinetic remediation alone significantly altered the bacterial community of the saline soil. The addition of the strain SWH-15 alone had a weak effect on the bacterial community. However, the strain SWH-15 boosted the growth of other bacterial species in the metabolic network and weakened the impact of electrical field on the whole bacterial community structure in the Bio + EK treatment.

Distribution of ion contents and microorganisms during the electro-bioremediation of petroleum-contaminated saline soil

This study investigated the distribution of ion contents and microorganisms during the electro-bioremediation (EK-Bio) of petroleum-contaminated saline soil. The results showed that soil ions tend to accumulate around the electrodes, and the concentration was correlated with the distance from the electrodes. The average soil ion content was 7.92 g/kg around the electrodes (site A) and 0.55 g/kg at the furthest distance from the electrodes (site B) after 112 days of treatment, while the initial average content was 3.92 g/kg. Smooth linear (R² = 0.98) loss of soil ions was observed at site C, which was closer to the electrodes than site B, and had a final average soil ion content of 1.96 g/kg. The dehydrogenase activity was much higher in EK-Bio test soil than in the Bio test soil after 28 days of treatment, and followed the order: site C > site B > site A. However, the soil dehydrogenase activity dropped continuously when the soil ion reached very high and low concentrations at sites A and B. The soil microbial community varied in sample sites that had different ion contents, and the soil microbial diversity followed the order: site C > site B > site A. The applied electric field clearly enhanced the biodegradation efficiency for soil petroleum contaminants. However, the biodegradation promotion effects were weakening in soils where the ion contents were extremely high and low (sites A and B). These results can provide useful information for EK-Bioremediation of organic-contaminated saline soil.

In situ construction of low permeable barrier in soil to prevent pollutant migration by applying weak electric field

In order to prevent vertical migration of pollutant in soil matrix, this study firstly proposed to construct an in situ low permeable barrier (LPB) through synchronously transporting calcium and carbonate. After LPB construction, the soil permeability was declined tenfold. Exchangeable calcium (37.3%) and calcium bonding to carbonate (41.7%) respectively alleviated flocculation of microaggregates and cementation of marcoaggregates. Accordingly, smaller particles (<1 mm) aggregated into bigger ones (>2 mm) after electrokinetic remediation. The other soil characters like pH, moisture, and bacterial communities were well preserved after remediation. In addition, the pollutant prevention was divided into two phases as unsaturated phase and saturated phase. In unsaturated phase, phenol, F^-, Cd²⁺, and Ni²⁺ in filtrate were all lower than 0.1 mg, and Cr₂O₄^2--Cr discharged from LPB was 1/5.1 than that from initial soil. In saturated phase, LPB prevented 4.3-12.1 fold pollutant than initial soil. Taken together, proposed method could effectively prevent vertical migration of pollutants, indicating significant values for saving soil remediation cost or avoiding contamination of underground water.

Coupling electrokinetics with microbial biodegradation enhances the removal of cycloparaffinic hydrocarbons in soils

An innovative approach that couples electrokinetics with microbial degradation to breakdown cycloparaffinic hydrocarbons in soils is described. Soils were spiked with cyclododecane, used as a model pollutant, at approximately 1000mgkg^-1. A mixture of petroleum-utilizing bacteria was added to achieve about 10⁶-10⁷ CFUg^-1. Then, three treatments were applied for 25 days: (1) no electric field, control; (2) a constant voltage gradient of 1.3Vcm^-1 in one direction; and (3) the same electric field, but with periodical switching of polarity. The degradation pathway of cyclododecane was not changed by the electric field, but the dynamic processes were remarkably enhanced, especially when the electric field was periodically switched. After 25 days, 79.9% and 87.0% of the cyclododecane was degraded in tests 2 and 3, respectively; both much higher than the 61.5% degraded in test 1. Analysis of the intermediate products strongly indicated that the competitive advantage of the electric field was the increase in ring-breaking of cyclododecane, resulting in greater concentrations of linear substances that were more susceptible to microbial attack, that is, β-oxidation. The conditions near the cathode were more favorable for the growth and metabolism of microorganisms, which also enhanced β-oxidation of the linear alkanoic acids. Therefore, when the electric field polarity was periodically switched, the functions of both the anode and cathode electrodes were applied across the whole soil cell, further increasing the degradation efficiency.

Effect of electric field on the performance of soil electro-bioremediation with a periodic polarity reversal strategy

In this work, it is studied the effect of the electric fields (within the range 0.0-1.5 V cm(-1)) on the performance of electrobioremediation with polarity reversal, using a bench scale plant with diesel-spiked kaolinite with 14-d long tests. Results obtained show that the periodic changes in the polarity of the electric field results in a more efficient treatment as compared with the single electro-bioremediation process, and it does not require the addition of a buffer to keep the pH within a suitable range. The soil heating was not very important and it did not cause a change in the temperature of the soil up to values incompatible with the life of microorganisms. Low values of water transported by the electro-osmosis process were attained with this strategy. After only 14 d of treatment, by using the highest electric field studied in this work (1.5 V cm(-1)), up to 35.40% of the diesel added at the beginning of the test was removed, value much higher than the 10.5% obtained by the single bioremediation technology in the same period.

Anaerobic degradation of increased phenol concentrations in batch assays

Phenol is a wastewater contaminant depicting an environmental hazard. It can be found in effluents from various industrial processes and becomes even more common as a waste by-product of biomass-based bioenergy concepts. Because of its toxicity to anaerobic microorganisms, it can be recalcitrant during biogas production and anaerobic wastewater treatment. This study tested increased phenol loads (100 to 5000 mg L(-1)) as the sole carbon source in a semi-continuous mesophilic anaerobic adaption experiment using an unadapted microbial community from a standard biogas plant. Phenol was completely degraded at starting concentrations of up to 2000 mg L(-1). At 5000 mg L(-1), complete inhibition of the anaerobic community was observed. Lag times were reduced down to less than a day treating 2000 mg L(-1) after 16 weeks of adaption to gradually increased phenol concentrations. Specific degradation rates increased consecutively up to 7.02 mg gVS (-1) day(-1) at 2000 mg L(-1). This concentration was completely degraded within less than 12 days. The microbial community composition was assessed using 16S rRNA gene-based terminal restriction fragment length polymorphism (T-RFLP) analysis. In the bacterial community, no clear shift was visible. Clostridia were with the highest relative abundance of 27 %, the most prominent bacterial class. T-RFs representing Clostridia, Anaerolinaceae, Flavobacteria, and Bacteroidea appeared at similar relative abundance level throughout the experiment. The archaeal community, however, changed from a Methanosarcinales-dominated community (57%) to a community with a nearly even distribution of Methanobacteriales (21%) and Methanosarcinales (34%) with increasing starting phenol concentration.

Isolation and characterization of heavy polycyclic aromatic hydrocarbon-degrading bacteria adapted to electrokinetic conditions

Polycyclic aromatic hydrocarbon (PAH)-degrading bacteria capable of growing under electrokinetic conditions were isolated using an adjusted acclimation and enrichment procedure based on soil contaminated with heavy PAHs in the presence of an electric field. Their ability to degrade heavy PAHs under an electric field was individually investigated in artificially contaminated soils. The results showed that strains PB4 (Pseudomonas fluorescens) and FB6 (Kocuria sp.) were the most efficient heavy PAH degraders under electrokinetic conditions. They were re-inoculated into a polluted soil from an industrial site with a PAH concentration of 184.95 mg kg(-1). Compared to the experiments without an electric field, the degradation capability of Pseudomonas fluorescens and Kocuria sp. was enhanced in the industrially polluted soil under electrokinetic conditions. The degradation extents of total PAHs were increased by 15.4 and 14.0% in the electrokinetic PB4 and FB6 experiments (PB4 + EK and FB6 + EK) relative to the PB4 and FB6 experiments without electrokinetic conditions (PB4 and FB6), respectively. These results indicated that P. fluorescens and Kocuria sp. could efficiently degrade heavy PAHs under electrokinetic conditions and have the potential to be used for the electro-bioremediation of PAH-contaminated soil, especially if the soil is contaminated with heavy PAHs.

Electro-assisted groundwater bioremediation: fundamentals, challenges and future perspectives

Bioremediation is envisaged as an important way to abate groundwater contamination, but the need for chemical addition and limited bioavailability of electron donors/acceptors or contaminants hamper its application. As a promising means to enhance such processes, electrochemical system has drawn considerable attention, as it offers distinct advantages in terms of environmental benignity, controllability and treatment efficiency. Meanwhile, there are also potential risks and considerable engineering challenges for its practical application. This review provides a first comprehensive introduction of this emerging technology, discusses its potential applications and current challenges, identifies the knowledge gaps, and outlooks the future opportunities to bring it to field application. The need for a better understanding on the microbiology under electrochemical stimulation and the future requirements on process monitoring, modeling and evaluation protocols and field investigations are highlighted.

Synergistic effects of bioremediation and electrokinetics in the remediation of petroleum-contaminated soil

The present study evaluated the coupling interactions between bioremediation (BIO) and electrokinetics (EK) in the remediation of total petroleum hydrocarbons (TPH) by using bio-electrokinetics (BIO-EK) with a rotatory 2-D electric field. The results demonstrated an obvious positive correlation between the degradation extents of TPH and electric intensity both in the EK and BIO-EK tests. The use of BIO-EK showed a significant improvement in degradation of TPH as compared to BIO or EK alone. The actual degradation curve in BIO-EK tests fitted well with the simulated curve obtained by combining the degradation curves in BIO- and EK-only tests during the first 60 d, indicating a superimposed effect of biological degradation and electrochemical stimulation. The synergistic effect was particularly expressed during the later phase of the experiment, concurrent with changes in the microbial community structure. The community composition changed mainly according to the duration of the electric field, leading to a reduction in diversity. No significant spatial shifts in microbial community composition and bacterial numbers were detected among different sampling positions. Soil pH was uniform during the experimental process, soil temperature showed no variations between the soil chambers with and without an electric field.

Electrokinetic-enhanced bioremediation of organic contaminants: a review of processes and environmental applications

There is current interest in finding sustainable remediation technologies for the removal of contaminants from soil and groundwater. This review focuses on the combination of electrokinetics, the use of an electric potential to move organic and inorganic compounds, or charged particles/organisms in the subsurface independent of hydraulic conductivity; and bioremediation, the destruction of organic contaminants or attenuation of inorganic compounds by the activity of microorganisms in situ or ex situ. The objective of the review is to examine the state of knowledge on electrokinetic bioremediation and critically evaluate factors which affect the up-scaling of laboratory and bench-scale research to field-scale application. It discusses the mechanisms of electrokinetic bioremediation in the subsurface environment at different micro and macroscales, the influence of environmental processes on electrokinetic phenomena and the design options available for application to the field scale. The review also presents results from a modelling exercise to illustrate the effectiveness of electrokinetics on the supply electron acceptors to a plume scale scenario where these are limiting. Current research needs include analysis of electrokinetic bioremediation in more representative environmental settings, such as those in physically heterogeneous systems in order to gain a greater understanding of the controlling mechanisms on both electrokinetics and bioremediation in those scenarios.

Electrokinetic remediation of organochlorines in soil: enhancement techniques and integration with other remediation technologies

Electrokinetic remediation has been increasingly used in soils and other matrices for numerous contaminants such as inorganic, organic, radionuclides, explosives and their mixtures. Several strategies were tested to improve this technology effectiveness, namely techniques to solubilize contaminants, control soil pH and also couple electrokinetics with other remediation technologies. This review focus in the experimental work carried out in organochlorines soil electroremediation, aiming to systemize useful information to researchers in this field. It is not possible to clearly state what technique is the best, since experimental approaches and targeted contaminants are different. Further research is needed in the application of some of the reviewed techniques. Also a number of technical and environmental issues will require evaluation for full-scale application. Removal efficiencies reported in real contaminated soils are much lower than the ones obtained with spiked kaolinite, showing the influence of other factors like aging of the contamination and adsorption to soil particles, resulting in important challenges when transferring technologies into the field.

A review on techniques to enhance electrochemical remediation of contaminated soils

Electrochemical remediation is a promising remediation technology for soils contaminated with inorganic, organic, and mixed contaminants. A direct-current electric field is imposed on the contaminated soil to extract the contaminants by the combined mechanisms of electroosmosis, electromigration, and/or electrophoresis. The technology is particularly effective in fine-grained soils of low hydraulic conductivity and large specific surface area. However, the effectiveness of the technology may be diminished by sorption of contaminants on soil particle surfaces and various effects induced by the hydrogen ions and hydroxide ions generated at the electrodes. Various enhancement techniques have been developed to tackle these diminishing effects. A comprehensive review of these techniques is given in this paper with a view to providing useful information to researchers and practitioners in this field.

Responses of Scirpus triqueter, soil enzymes and microbial community during phytoremediation of pyrene contaminated soil in simulated wetland

The aim of this study was to determine the enhancement of Scirpus triqueter in the dissipation of pyrene and the interaction of pyrene with plant, soil enzymes and microbial community. The results indicated that the dissipation ratios of pyrene in the rhizospheric and non-rhizospheric soil were 64.65 ± 3.86% and 54.49 ± 2.74%, respectively, and were higher than that in the unplanted soil (42.60 ± 0.71%) at 80 d after planting S. triqueter. The pyrene was toxic to S. triqueter, as evidenced by growth inhibition in height, diameter, shoot number and biomass during the planting period. The activities of dehydrogenase decreased significantly at the presence of pyrene in soils, and increased remarkably with the introduction of S. triqueter. It was found that the pyrene addition increased the ratios of fungal/total fatty acids and gram-positive/gram-negative, but the presence of S. triqueter decreased the ratios of gram-positive/gram-negative. A larger stress level was found in the pyrene treated soils without S. triqueter. The ratio of aerobic/anaerobic bacteria decreased with increasing pyrene concentration, but increased when S. triqueter was planted. The principal analysis of phospholipid fatty acid signatures revealed that microbial community structures in the rhizospheric and non-rhizospheric soil were similar, but different from those in the unplanted and control soil.

Use of primer selection and restriction enzymes to assess bacterial community diversity in an agricultural soil used for potato production via terminal restriction fragment length polymorphism

Terminal restriction fragment length polymorphism (T-RFLP) can be used to assess how land use management changes the dominant members of bacterial communities. We compared T-RFLP profiles obtained via amplification with forward primers (27, 63F) each coupled with the fluorescently labeled reverse primer (1392R) and multiple restriction enzymes to determine the best combination for interrogating soil bacterial populations in an agricultural soil used for potato production. Both primer pairs provide nearly universal recognition of a 1,400-bp sequence of the bacterial domain in the V(1)-V(3) region of the 16S ribosomal RNA (rRNA) gene relative to known sequences. Labeling the reverse primer allowed for direct comparison of each forward primer and the terminal restriction fragments' relative migration units obtained with each primer pair and restriction enzyme. Redundancy analysis (RDA) and nested multivariate analysis of variance (MANOVA) were used to assess the effects of primer pair and choice of restriction enzyme on the measured relative migration units. Our research indicates that the 63F-1392R amplimer pair provides a more complete description with respect to the bacterial communities present in this potato (Solanum tuberosum L.)-barley (Hordeum vulgare L.) rotation over seeded to crimson clover (Trifolium praense L.). Domain-specific 16S rRNA gene primers are rigorously tested to determine their ability to amplify across a target region of the gene. Yet, variability within or between T-RFLP profiles can result from factors independent of the primer pair. Therefore, researchers should use RDA and MANOVA analyses to evaluate the effects that additional laboratory and environmental variables have on bacterial diversity.