Leaching behavior of fluorescent additives from microplastics and the toxicity of leachate to Chlorella vulgaris

Unveiling the microplastic perturbation on surface flow constructed wetlands with macrophytes of different life forms: Responses of nitrogen removal and sensory quality

Microplastics (MPs) discharging into constructed wetlands pose risks to these ecosystems. Nevertheless, the perturbation of MPs to different types of macrophytes, which play important roles in purifying pollutants of wetlands, has not been fully elucidated. In this study, polystyrene MPs (PS-MPs) perturbation on nitrogen removal and sensory quality of surface flow constructed wetlands planted with emergent and submerged macrophytes were investigated. PS-MPs enhanced N removal efficiencies temporarily, whereas the N removal rate constants were declined as exposure time was prolonged. The NH4+-N removal rate constants declined by 25.78 % and 34.03 % in E and S groups respectively. The NO3--N removal rate constants declined by 22.13 % in the S groups. Denitrifiers including Thiobacillus, Rhodobacter, and Sulfuritalea were stressed. The sensory quality deteriorated after PS-MPs exposure, which was significantly related to changes in Chlorophyll a, particle size distribution, and colored dissolved organic matter. Turbidity in E groups and chroma in S groups were greatly affected by PS-MPs. Overall, under MPs exposure, macrophytes in E groups were more suitable for nitrogen removal, and macrophytes in S groups better purified the turbidity. The study could provide the basis for better allocation of macrophytes in CWs to reduce the purifying risk by PS-MPs disturbance.

Microplastic-derived dissolved organic matter: Generation, characterization, and environmental behaviors

Microplastics (MPs) represent a substantial and emerging class of pollutants distributed widely in various environments, sparking growing concerns about their environmental impact. In environmental systems, dissolved organic matter (DOM) is crucial in shaping the physical, chemical, and biological processes of pollutants while significantly contributing to the global carbon budget. Recent findings have revealed that microplastic-derived dissolved organic matter (MP-DOM) constitutes approximately 10 % of the DOM present on the ocean surface, drawing considerable attention. Hence, this study's primary objective is to explore, the generation, characterization, and environmental behaviors of MP-DOM. The formation and characteristics of MP-DOM are profoundly influenced by leaching conditions and types of MPs. This review delves into the mechanisms of the generation of MP-DOM and provides an overview of a wide array of analytical techniques, including ultraviolet-visible (UV-Vis) spectroscopy, fluorescence spectroscopy, Fourier transform infrared spectroscopy (FTIR), and mass spectroscopy, used to assess the MP-DOM characteristics. Furthermore, this review investigates the environmental behaviors of MP-DOM, including its impacts on organisms, photochemical processes, the formation of disinfection by-products (DBPs), adsorption behavior, and its interaction with natural DOM. Finally, the review outlines research challenges, perspectives for future MP-DOM research, and the associated environmental implications.

Looking beyond the obvious: The ecotoxicological impact of the leachate from fishing nets and cables in the marine mussel Mytilus galloprovincialis

Once in the marine environment, fishing nets and cables undergo weathering, breaking down into micro and nano-size particles and leaching plastic additives, which negatively affect marine biota. This study aims to unravel the ecotoxicological impact of different concentrations of leachate obtained from abandoned or lost fishing nets and cables in the mussel Mytilus galloprovincialis under long-term exposure (28 days). Biochemical biomarkers linked to antioxidant defense system, xenobiotic biotransformation, oxidative damage, genotoxicity, and neurotoxicity were evaluated in different mussel tissues. The chemical nature of the fishing nets and cables and the chemical composition of the leachate were assessed and metals, plasticizers, UV stabilizers, flame retardants, antioxidants, dyes, flavoring agents, preservatives, intermediates and photo initiators were detected. The leachate severely affected the antioxidant and biotransformation systems in mussels' tissues. Following exposure to 1 mg·L-1 of leachate, mussels' defense system was enhanced to prevent oxidative damage. In contrast, in mussels exposed to 10 and 100 mg·L-1 of leachate, defenses failed to overcome pro-oxidant molecules, resulting in genotoxicity and oxidative damage. Principal component analysis (PCA) and Weight of Evidence (WOE) evaluation confirmed that mussels were significantly affected by the leachate being the hazard of the leachate concentrations of 10 mg·L-1 ranked as major, while 1 and 100 mg·L-1 was moderate. These results highlighted that the leachate from fishing nets and cables can be a threat to the heath of the mussel M. galloprovincialis.

The environmental effects of microplastics and microplastic derived dissolved organic matter in aquatic environments: A review

Currently, microplastics (MPs) have ubiquitously distributed in different aquatic environments. Due to the unique physicochemical properties, MPs exhibit a variety of environmental effects with the coexisted contaminants. MPs can not only alter the migration of contaminants via vector effect, but also affect the transformation process and fate of contaminants via environmental persistent free radicals (EPFRs). The aging processes may enhance the interaction between MPs and co-existed contaminants. Thus, it is of great significance to review the aging mechanism of MPs and the influence of coexisted substances, the formation mechanism of EPFRs, environmental effects of MPs and relevant mechanism. Moreover, microplastic-derived dissolved organic matter (MP-DOM) may also influence the elemental biogeochemical cycles and the relevant environmental processes. However, the environmental implications of MP-DOM are rarely outlined. Finally, the knowledge gaps on environmental effects of MPs were proposed.

Microplastics and Anthropogenic Particles in Recreationally Caught Freshwater Fish from an Urbanized Region of the North American Great Lakes

BACKGROUND

Microplastics are a pervasive contaminant cycling through food webs-leading to concerns regarding exposure and risk to humans.

OBJECTIVES

We aimed to quantify and characterize anthropogenic particle contamination (including microplastics) in fish caught for human consumption from the Humber Bay region of Lake Ontario. We related quantities of anthropogenic particles to other factors (e.g., fish size) that may help in understanding accumulation of microplastics in fish.

METHODS

A total of 45 samples of six fish species collected from Humber Bay in Lake Ontario near Toronto, Ontario, Canada, were examined for anthropogenic particles in their gastrointestinal (GI) tracts and fillets. Using microscopy and spectroscopy, suspected anthropogenic particles were identified and characterized.

RESULTS

We observed anthropogenic particles in the GI tracts and fillets of all species. Individual fish had a mean ± standard deviation of 138 ± 231 anthropogenic particles, with a single fish containing up to 1,508 particles. GI tracts had 93 ± 226 particles/fish (9.8 ± 32.6 particles/gram), and fillets had 56 ± 61 particles/fish (0.5 ± 0.8 particles/gram). Based on a consumption rate of 2 servings/week, the average yearly human exposure through the consumption of these fish fillets would be 12,800 ± 18,300 particles.

DISCUSSION

Our findings suggest that consumption of recreationally caught freshwater fish can be a pathway for human exposure to microplastics. The elevated number of particles observed in fish from Humber Bay highlights the need for large-scale geographic monitoring, especially near sources of microplastics. Currently, it is unclear what the effects of ingesting microplastics are for humans, but given that recreationally caught freshwater fish are one pathway for human exposure, these data can be incorporated into future human health risk assessment frameworks for microplastics. https://doi.org/10.1289/EHP13540.

Recent progress on the toxic effects of microplastics on Chlorella sp. in aquatic environments

Microplastics (MPs) are emerging contaminants that have harmful effects on ecosystems. Microalgae are important primary producers in aquatic environments, providing nutrients for various organisms. These microorganisms may be affected by MPs. Therefore, it is important to investigate the toxicity aspects of different MPs on Chlorella species. It can be seen that the BG-11 culture medium was the most commonly used medium in 40 % of the studies for the growth of Chlorella sp. Chlorella sp. grows optimally at a temperature of 25 °C and a pH of 7. Most studies show that Chlorella sp. can grow in the range of 3000-6000 lux. Moreover, various techniques have been used to analyze the morphological properties of MPs in different studies. These techniques included scanning electron microscopy (SEM), Fourier transform infrared (FTIR), and transmission electron microscopy (TEM), which were used in 65 %, 35 %, and 27 % of the studies, respectively. 53 % of the research has focused on the toxic effects of PS on Chlorella sp. Findings show that 41 % of the studies investigated MPs concentrations in the range of 10-100 mg/L, followed by 32 % of the studies in the range of 100-1000 mg/L. The studies found that MPs were used in a spherical shape in 45 % of the cases. The enzymes most affected by MPs were superoxide dismutase (SOD) and Malondialdehyde (MDA), accounting for 48 % of the studies each. Additionally, exposure to MPs increased the activity of enzymes such as SOD and MDA. In general, it can be concluded that MPs had a relatively high negative effect on the growth of Chlorella sp.

Toxicity and fate of cadmium in hydroponically cultivated lettuce (Lactuca sativa L.) influenced by microplastics

Although more attention has been paid to microplastics (MPs) pollution in environment, research on the synthetic influence of microplastic and heavy metals remains limited. To help fill this information gap, we investigated the adsorption behavior of virgin polyvinyl chloride microplastics (PVCMPs) (≤450 µm white spherical powder) on cadmium (II). The effects on seed germination, seedling growth, photosynthetic system, oxidative stress indicators of lettuce, and changes in Cd bioavailability were evaluated under Cd2+ (25 μmol/L), PVCMPs (200 mg/L), and PVCMP-Cd combined (200 mg/L + 25 μmol/L) exposures in hydroponic system. The results demonstrated that the PVCMPs effectively adsorbed Cd ions, which validated by the pseudo-second-order kinetic and the Langmuir isotherm models, indicating the sorption of Cd2+ on the PVCMPs was primary chemisorption and approximates monomolecular layer sorption. Compared to MPs, Cd significantly inhibits plant seed germination and seedling growth and development. However, Surprising improvement in seed germination under PVCMPs-Cd exposure was observed. Moreover, Cd2+ and MPs alone or combined stress caused oxidative stress with reactive oxygen species (ROS) including H2O2, O2- and Malondialdehyde (MDA) accumulation in plants, and substantially damaged to photosynthesis. With the addition of PVCMPs, the content of Cd in the leaves significantly (P<0.01) decreased by 1.76-fold, and the translocation factor and Cd2+removal rate in the water substantially (P<0.01) decreased by 6.73-fold and 1.67-fold, respectively in contrast to Cd2+ stress alone. Therefore, it is concluded the PVCMP was capable of reducing Cd contents in leaves, alleviating Cd toxicity in lettuce. Notably, this study provides a scientific foundation and reference for comprehending the toxicological interactions between microplastics and heavy metals in the environment.

Improved microalgae carbon fixation and microplastic sedimentation in the lake through in silico method

The impact of microplastics in lake water environments on microalgae carbon fixation and microplastic sedimentation has attracted global attention. The molecular dynamic simulation method was used to design microplastic additive proportioning schemes for improving microalgae carbon fixation and microplastic sedimentation. Results showed that the harm of microplastics can be effectively alleviated by adjusting the proportioning scheme of plastic additives. Besides, the decabromodiphenyl oxide (DBDPO) was identified as the main additive that affect the microalgae carbon fixation and microplastic sedimentation. Thus, a molecular modification based on CiteSpace visual analysis was firstly used and 12 DBDPO derivatives were designed. After the screening, DBDPO-2 and DBDPO-5 became the environmentally friendly DBDPO alternatives, with the highest microalgae carbon fixation and microplastic sedimentation ability enhancement of over 25 %. Compared to DBDPO, DBDPO derivatives were found easier to stimulate the adsorption and binding ability of surrounding hotspot amino acids to CO2 and ribulose-5-phosphate, increasing the solvent-accessible surface area of microplastics, thus improving the microalgae carbon fixation and microplastic sedimentation ability. This study provides theoretical support for simultaneously promoting the microalgae carbon fixation and microplastic sedimentation in the lake water environment and provides scientific basis for the protection and sustainable development of lake water ecosystem.

Unveiling the detrimental effects of polylactic acid microplastics on rice seedlings and soil health

The environmental impact of biodegradable polylactic acid microplastics (PLA-MPs) has become a global concern, with documented effects on soil health, nutrient cycling, water retention, and crop growth. This study aimed to assess the repercussions of varying concentrations of PLA-MPs on rice, encompassing aspects such as growth, physiology, and biochemistry. Additionally, the investigation delved into the influence of PLA-MPs on soil bacterial composition and soil enzyme activities. The results illustrated that the highest levels of PLA-MPs (2.5%) impaired the photosynthesis activity of rice plants and hampered plant growth. Plants exposed to the highest concentration of PLA-MPs (2.5%) displayed a significant reduction of 51.3% and 47.7% in their root and shoot dry weights, as well as a reduction of 53% and 49% in chlorophyll a and b contents, respectively. The activities of catalase (CAT), superoxide dismutase (SOD), peroxidase (POD), and ascorbate peroxidase (APX) in rice leaves increased by 3.1, 2.8, 3.5, and 5.2 folds, respectively, with the highest level of PLA-MPs (2.5%). Soil enzyme activities, such as CAT, urease, and dehydrogenase (DHA) increased by 19.2%, 10.4%, and 22.5%, respectively, in response to the highest level of PLA-MPs (2.5%) application. In addition, PLA-MPs (2.5%) resulted in a remarkable increase in the relative abundance of soil Proteobacteria, Nitrospirae, and Firmicutes by 60%, 31%, and 98.2%, respectively. These findings highlight the potential adverse effects of PLA-MPs on crops and soils. This study provides valuable insights into soil-rice interactions, environmental risks, and biodegradable plastic regulation, underscoring the need for further research.

Photo-induced leaching behaviors and biodegradability of dissolved organic matter from microplastics and terrestrial-sourced particles

Recent studies have increasingly focused on the occurrence of plastic leachate and its impacts on aquatic ecosystems. Nonetheless, the environmental fate of this leachate in the presence of abundant natural organic matter (NOM)-a typical scenario in environments contaminated with plastics-remains underexplored. This study investigates the photo-induced leaching behaviors of dissolved organic matter (DOM) from terrestrial-sourced particles (forest soil and leaf litter) and microplastics (MPs), specifically polystyrene (PS) and polyvinyl chloride (PVC), over a two-week period. We also examined the biodegradability and spectroscopic characteristics of the leached DOM from both sources. Our results reveal that DOM from microplastics (MP-DOM) demonstrates more persistent leaching behavior compared to terrestrial-derived DOM, even with lesser quantities per unit of organic carbon. UV irradiation was found to enhance DOM leaching across all particle types. However, the photo-induced leaching behaviors of fluorescent components varied with the particle type. The MP group exhibited a broader range and higher biodegradability (ranging from 19.7% to 61.6%) compared to the terrestrial-sourced particles (ranging from 3.7% to 16.5%). DOM leached under UV irradiation consistently showed higher biodegradability than that under dark conditions. Furthermore, several fluorescence characteristics of DOM, such as the protein/phenol-like component (%C2), terrestrial humic-like component (%C3), and humification index (HIX)-traditionally used to indicate the biodegradability of natural organic matter-were also effective in assessing MP-DOM (with correlation coefficients R2 = 0.6055 (p = 0.003), R2 = 0.5389 (p = 0.007), and R2 = 0.4640 (p = 0.015), respectively). This study provides new insights into the potential differences in environmental fate between MP-DOM and NOM in aquatic environments heavily contaminated with MPs.

The impact of nanomaterials on autophagy across health and disease conditions

Autophagy, a catabolic process integral to cellular homeostasis, is constitutively active under physiological and stress conditions. The role of autophagy as a cellular defense response becomes particularly evident upon exposure to nanomaterials (NMs), especially environmental nanoparticles (NPs) and nanoplastics (nPs). This has positioned autophagy modulation at the forefront of nanotechnology-based therapeutic interventions. While NMs can exploit autophagy to enhance therapeutic outcomes, they can also trigger it as a pro-survival response against NP-induced toxicity. Conversely, a heightened autophagy response may also lead to regulated cell death (RCD), in particular autophagic cell death, upon NP exposure. Thus, the relationship between NMs and autophagy exhibits a dual nature with therapeutic and environmental interventions. Recognizing and decoding these intricate patterns are essential for pioneering next-generation autophagy-regulating NMs. This review delves into the present-day therapeutic potential of autophagy-modulating NMs, shedding light on their status in clinical trials, intervention of autophagy in the therapeutic applications of NMs, discusses the potency of autophagy for application as early indicator of NM toxicity.

Joint toxicity of cadmium (II) and microplastic leachates on wheat seed germination and seedling growth

Cadmium (Cd) pollution ranks first in soils (7.0%) and microplastics usually have a significant adsorption capacity for it, which could pose potential threats to agricultural production and human health. However, the joint toxicity of Cd and microplastics on crop growth remains largely unknown. In this study, the toxic effects of Cd2+ and two kinds of microplastic leachates, polyvinyl chloride (PVC) and low-density polyethylene (LDPE), on wheat seed germination and seedlings' growth were explored under single and combined conditions. The results showed that Cd2+ solution and two kinds of microplastic leachates stimulated the wheat seed germination process but inhibited the germination rate by 0-8.6%. The combined treatments promoted wheat seed germination but inhibited the seedlings' growth to different degrees. Specifically, the combination of 2.0 mg L-1 Cd2+ and 1.0 mgC L-1 PVC promoted both seed germination and seedlings' growth, but they synergistically increased the antioxidant enzyme activity of seedlings. The toxicity of the PVC leachate to wheat seedlings was stronger than LDPE leachate. The addition of Cd2+ could alleviate the toxicity of PVC leachate on seedlings, and reduce the toxicity of LDPE leachate on seedlings under the same concentration class combinations but aggravated stress under different concentration classes, consistent with the effect on seedlings' growth. Overall, Cd2+, PVC, and LDPE leachates have toxic effects on wheat growth, whether treated under single or combined treatments. This study has important implications for the joint toxicity of Cd2+ solution and microplastic leachates in agriculture.

Effects of ocean acidification and polystyrene microplastics on the oysters Crassostrea gigas: An integrated biomarker and metabolomic approach

The adverse impacts of microplastics (MPs) or ocean acidification (OA) on mollusks have been widely reported, however, little is known about their combined effects on mollusks. The oysters Crassostrea gigas were exposed to two sizes of polystyrene MPs with 1 × 104 particles/L (small polystyrene MPs (SPS-MPs): 6 μm, large polystyrene MPs (LPS-MPs): 50-60 μm) at two pH levels (7.7 and 8.1) for 14 days. The antagonistic effects between MPs and OA on oysters were mainly observed. Single SPS-MPs exposure can induce CAT enzyme activity and LPO level in gills, while LPS-MPs exposure alone can increase PGK and PEPCK gene expression in digestive glands. Ocean acidification can increase clearance rate and inhibit antioxidant enzyme activity, whereas combined exposure of OA and SPS-MPs can affect the metabolomic profile of digestive glands. This study emphasized that the potential toxic effects of MPs under the scene of climate change should be concerned.

Synthetic and natural rubber associated chemicals drive functional and structural changes as well as adaptations to antibiotics in in vitro marine microbiomes

The leaching of additives from plastics and elastomers (rubbers) has raised concerns due to their potential negative impacts on the environment and the development of antibiotic resistance. In this study, we investigated the effects of chemicals extracted from two types of rubber on microbiomes derived from a benthic sea urchin and two pelagic fish species. Additionally, we examined whether bacterial communities preconditioned with rubber-associated chemicals displayed adaptations to antibiotics. At the highest tested concentrations of chemicals, we observed reduced maximum growth rates and yields, prolonged lag phases, and increased alpha diversity. While the effects on alpha and beta diversity were not always conclusive, several bacterial genera were significantly influenced by chemicals from the two rubber sources. Subsequent exposure of sea urchin microbiomes preconditioned with rubber chemicals to the antibiotic ciprofloxacin resulted in decreased maximum growth rates. This indicates a more sensitive microbiome to ciprofloxacin when preconditioned with rubber chemicals. Although no significant interaction effects between rubber chemicals and ciprofloxacin exposure were observed in bacterial alpha and beta diversity, we observed log-fold changes in two bacterial genera in response to ciprofloxacin exposure. These findings highlight the structural and functional alterations in microbiomes originating from various marine species when exposed to rubber-associated chemicals and underscore the potential risks posed to marine life.

Are we underestimating stormwater? Stormwater as a significant source of microplastics in surface waters

Stormwater represent a critical pathway for transporting microplastics (MPs) to surface waters. Due to complex dynamics of MPs in stormwater, its dispersion, weathering, risk, and transport are poorly understood. This review bridges those gaps by summarizing the latest findings on sources, abundance, characteristics, and dynamics involved in stormwater MP pollution. Weathering starts before or after MPs enter stormwater and is more pronounced on land due to continuous heat and mechanical stress. Land use patterns, rainfall intensity, MPs size and density, and drainage characteristics influence the transport of MPs in stormwater. Tire and road wear particles (TRWPs), littering, and road dust are major sources of MPs in stormwater. The concentrations of MPs varies from 0.38-197,000 particles/L globally. Further MP concentrations showed regional variations, highlighting the importance of local monitoring efforts needed to understand local pollution sources. We observed unique signatures associated with the shape and color of MPs. Fibers and fragments were widely reported, with transparent and black being the predominant colors. We conclude that the contribution of stormwater to MP pollution in surface waters is significantly greater than wastewater treatment plant effluents and demands immediate attention. Field and lab scale studies are needed to understand its behavior in stormwater and the risk posed to the downstream water bodies.

Microplastics and associated chemicals in drinking water: A review of their occurrence and human health implications

Microplastics (MPs) have entered drinking water (DW) via various pathways, raising concerns about their potential health impacts. This study provides a comprehensive review of MP-associated chemicals, such as oligomers, plasticizers, stabilizers, and ultraviolet (UV) filters that can be leached out during DW treatment and distribution. The leaching of these chemicals is influenced by various environmental and operating factors, with three major ones identified: MP concentration and polymer type, pH, and contact time. The leaching process is substantially enhanced during the disinfection step of DW treatment, due to ultraviolet light and/or disinfectant-triggered reactions. The study also reviewed human exposure to MPs and associated chemicals in DW, as well as their health impacts on the human nervous, digestive, reproductive, and hepatic systems, especially the neuroendocrine toxicity of endocrine-disrupting chemicals. An overview of MPs in DW, including tap water and bottled water, was also presented to enable a background understanding of MPs-associated chemicals. In short, certain chemicals leached from MPs in DW can have significant implications for human health and demand further research on their long-term health impacts, mitigation strategies, and interactions with other pollutants such as disinfection byproducts (DBPs) and per- and polyfluoroalkyl substances (PFASs). This study is anticipated to facilitate the research and management of MPs in DW and beverages.

Microplastic interactions in the agroecosystems: methodological advances and limitations in quantifying microplastics from agricultural soil

The instantaneous growth of the world population is intensifying the pressure on the agricultural sector. On the other hand, the critical climate changes and increasing load of pollutants in the soil are imposing formidable challenges on agroecosystems, affecting productivity and quality of the crops. Microplastics are among the most prevalent pollutants that have already invaded all terrestrial and aquatic zones. The increasing microplastic concentration in soil critically impacts crop plants growth and yield. The current review elaborates on the behaviors of microplastics in soil and their impact on soil quality and plant growth. The study shows that microplastics alter the soil's biophysical properties, including water-holding capacity, bulk density, aeration, texture, and microbial composition. In addition, microplastics interact with multiple pollutants, such as polyaromatic hydrocarbons and heavy metals, making them more bioavailable to crop plants. The study also provides a detailed insight into the current techniques available for the isolation and identification of soil microplastics, providing solutions to some of the critical challenges faced and highlighting the research gaps. In our study, we have taken a holistic, comprehensive approach by analysing and comparing various interconnected aspects to provide a deeper understanding of all research perspectives on microplastics in agroecosystems.

Interactions between microplastics and Culex sp. larvae in wastewater

Microplastics (MPs) are a growing issue because they endanger both aquatic organisms and humans. Studies have indicated that wastewater treatment plants (WWTPs) are one of the major contributors to MPs in the environment. However, studies on the abundance of MP contamination in WWTPs and its transmission into aquatic organisms are still scarce, especially in Egypt. The goal of this study was to examine the temporal fluctuations in the distribution of MPs in surface water and the dominant macroinvertebrate fauna (Culex sp. larvae) in a fixed wastewater basin in Sohag Governorate, Egypt. The average of MPs in the surface water was 3.01 ± 0.9 particles/L. The results indicated to seasonal variation of MP abundance in the wastewater basin that was significantly higher in winter than in the other seasons. The risk index for polymers (H), pollution load index (PLI), and potential ecological risk index (RI) were used to assess the degree of MP contamination. The basin has moderate H values (<1000) because of the presence of polymers with moderate hazard scores such as polyester (PES), polyethylene (PE), and polypropylene (PP). According to the PLI values, surface water is extremely contaminated with MPs (PLI: 88 to 120). The RI values of surface water showed higher ecological risk (level V). MPs in Culex sp. larvae were seasonally changed with an 85% detection rate, and an abundance average of 0.24 ± 0.65 particles/ind, MP concentration in Culex sp. larvae was influenced by the MP characters (shape, color, and polymer). The larvae of Culex sp. showed a greater preference for black and red fibrous polyester (PES) with sizes (<1000 μm) of MPs. These findings suggest that Culex sp. larvae prefer ingesting MPs that resemble their food. It is possible to overestimate Culex sp.'s preference for lower sizes because of their catabolism of MPs. To better understand the preferences of Culex sp. larvae for MPs, further controlled trials should be conducted. PRACTITIONER POINTS: Wastewater is highly contaminated with microplastics (MPs) in the different seasons. First report of detection of the seasonal abundance of MP in Culex sp. larvae. Culex sp. larvae showed a stronger feeding preference for MPs with specific characteristics. Smaller size and blue polyester fibers were the dominant characteristics of MPs in wastewater.

Photo-oxidation of Micro- and Nanoplastics: Physical, Chemical, and Biological Effects in Environments

Micro- and nanoplastics (MNPs) are attracting increasing attention due to their persistence and potential ecological risks. This review critically summarizes the effects of photo-oxidation on the physical, chemical, and biological behaviors of MNPs in aquatic and terrestrial environments. The core of this paper explores how photo-oxidation-induced surface property changes in MNPs affect their adsorption toward contaminants, the stability and mobility of MNPs in water and porous media, as well as the transport of pollutants such as organic pollutants (OPs) and heavy metals (HMs). It then reviews the photochemical processes of MNPs with coexisting constituents, highlighting critical factors affecting the photo-oxidation of MNPs, and the contribution of MNPs to the phototransformation of other contaminants. The distinct biological effects and mechanism of aged MNPs are pointed out, in terms of the toxicity to aquatic organisms, biofilm formation, planktonic microbial growth, and soil and sediment microbial community and function. Furthermore, the research gaps and perspectives are put forward, regarding the underlying interaction mechanisms of MNPs with coexisting natural constituents and pollutants under photo-oxidation conditions, the combined effects of photo-oxidation and natural constituents on the fate of MNPs, and the microbiological effect of photoaged MNPs, especially the biotransformation of pollutants.

Labelling of micro- and nanoplastics for environmental studies: state-of-the-art and future challenges

Studying microplastics and nanoplastics (MNP) in environmental matrices is extremely challenging, and recent developments in labelling techniques may hold much promise to further our knowledge in this field. Here, we reviewed MNP labelling techniques and applications to provide the first systematic and in-depth insight into MNP labelling. We classified all labelling techniques for MNP into four main types (fluorescent, metal, stable isotope and radioisotope) and discussed per type the synthesis methods, detection methods, influencing factors, and the current and future applications and challenges. Direct labelling of environmental MNP with fluorescent dyes and metals enables simple visualisation and selective detection of MNP to improve detection efficiency. However, it is still an open question how to avoid co-labelling of non-plastic (i.e. non-target, matrix) materials. Labelling of MNP that are intentionally added in the environment may allow semi-automatic detection of MNP particles with high accuracy and sensitivity during studies on e.g. transport and degradation. The detection limit of labelled MNP largely depends on particle size and the type of matrix. Fluorescent labelling allows efficient detection of microplastics, whereas metal labelling is preferred for nanoplastics research due to a potentially higher sensitivity. A major challenge for fluorescent and metal labelling is to develop techniques that do not alter the inherent MNP properties or only do so minimally, in particular the surface properties. Stable and radioactive isotope labelling (13C and 14C, but also 15N, 2H) of the polymer itself allows to preserve inherent MNP properties, but have been largely ignored. Overall, labelling of MNP holds great promise for advancing our fundamental understanding of the behaviour of plastics, notably the smallest fractions, in the environment.

Leaching of chemicals from microplastics: A review of chemical types, leaching mechanisms and influencing factors

It is widely known that microplastics are present everywhere and they pose certain risks to the ecosystem and humans which are partly attributed to the leaching of additives and chemicals from them. However, the leaching mechanisms remain insufficiently understood. This review paper aims to comprehensively and critically illustrate the leaching mechanisms in biotic and abiotic environments. It analyzes and synthesizes the factors influencing the leaching processes. It achieves the aims by reviewing >165 relevant scholarly papers published mainly in the past 10 years. According to this review, flame retardants, plasticizers and antioxidants are the three main groups of additives in microplastics with the potentials to disrupt endocrine functions, reproduction, brain development and kidney functions. Upon ingestion, the MPs are exposed to digestive fluids containing enzymes and acids which facilitate their degradation and leaching of chemicals. Fats and oils in the digestive tracts also aid the leaching and transport of these chemicals particularly the fat-soluble ones. Leaching is highly variable depending on chemical properties and bisphenols leach to a larger extent than other endocrine disrupting chemicals. However, the rates of leaching remain poorly understood, owing probably to multiple factors at play. Diffusion and partitioning are two main mechanisms of leaching in biotic and abiotic environments. Photodegradation is more predominant in the latter, generating reactive oxygen species which cause microplastic aging and leaching with minimal destruction of the chemicals leached. Effects of microplastic sizes on leaching are governed by Sherwood number, thickness of aqueous boundary layer and desorption half-life. This review contributes to better understanding of leaching of chemicals from microplastics which affect their ecotoxicities and human toxicity.

Oxidative stress and energy metabolic response of Isochrysis galbana induced by different types of pristine and aging microplastics and their leachates

The aging process and leachate composition of different types of MPs (PS, PS-NH2, PS-COOH and PMMA) with a particle size of 1.0 μm were characterized, and marine microalgae Isochrysis galbana OA3011(I. galbana) was used as test organism to investigate the 96 h toxic effects of MPs before and after aging as well as leachate exposure. Except for polymethyl methacrylate (PMMA), all other tested microplastics showed significant aggregation in seawater, which increased with the presence of surface amino and carboxyl groups, in addition, the increase in polymer dispersibility index (PDI) values after aging reflected more severe aggregation. Fourier transform infrared spectrometer (FTIR) showed that the surface amino groups were shed during the aging of PS-NH2, which can likewise be demonstrated by the change in surface electric potential from positive to negative before and after aging. PMMA, due to the addition of plasticizers (HEHP and DIBP detected in high concentration) and its own structure, has stronger resistance to aging than the other three microplastics, and no significant aging phenomenon occurs. As for I. galbana, growth inhibition, oxidative stress and energy metabolism were tested after exposure to different microplastics and their leachate. It was found that high concentrations of A-PS had a greater negative impact on I. galbana, while the toxic effects of PS-NH2 and PS-COOH on I. galbana behaved in a diametrically opposite way before and after aging compared to PS with the inhibitory effect decreasing after aging, which was caused by the shedding of surface groups. As for PMMA, the differences in the toxic effects on microalgae before and after aging were not significant. The inhibitory effect of low concentrations of PAEs (Phthalate acid esters) in the leachate of PS-COOH on I. galbana was not significant, and the stronger inhibitory effect of 4 d L-PS-NH2 was presumed to be the shedding of positively charged groups.

Small microplastic particles promote tetracycline and aureomycin adsorption by biochar in an aqueous solution

Biochar (BC) has been used to remove antibiotics from wastewater. Microplastics are emerging contaminants of wastewater. The capacities of microplastics for adsorbing antibiotics and the effects of microplastics of different types and particle sizes on antibiotic adsorption by BC have not been studied. Here, adsorption isotherm and kinetics experiments were performed to investigate tetracycline and aureomycin adsorption to polyvinyl chloride particles with diameters of 10, 100, 500, and 2000 μm, polylactic acid particles with diameters of 30, 100, 500, and 2000 μm (PLA30, PLA100, PLA500, and PLA2000, respectively), and wheat straw BC. The highest tetracycline adsorption capacity (25.00 mg g-1) was found for a PLA30 + BC. The tetracycline adsorption capacities of the other microplastic particles were 20.44-24.57 mg g-1. The highest aureomycin adsorption capacity (39.50 mg g-1) was found for 10 μm polyvinyl chloride particles and BC. The aureomycin adsorption capacities of the other microplastic particles were 32.21-38.42 mg g-1. The tetracycline adsorption capacities were 13.69%, 6.28%, 5.49%, and 4.54% higher for PLA30 + BC, PLA100 + BC, PLA500 + BC, and PLA2000 + BC, respectively, than for only BC. This may have been because there were more sites available per unit mass of microplastic for adsorbing tetracycline and dissolved organic carbon on small microplastic particles than large microplastic particles. The results indicated that microplastics can adsorb antibiotics and increase the amounts of antibiotics adsorbed by BC. Therefore, it is essential to consider potential interactions between BC and microplastics when BC is used to remove antibiotics from wastewater.

Characterization of the dynamic aging and leached dissolved organic carbon from biodegradable and conventional plastics under photooxidation

Biodegradable plastics have been regarded as promising candidates in the struggle against plastic pollution. However, the aging and dynamic leaching process of biodegradable and conventional plastics under photooxidation is still unclear. Herein, three types of non-biodegradable plastics (polypropylene, polyethylene, and polyethylene terephthalate), and two types of biodegradable plastics (polylactic acid and cornstarch-based plastics) were treated with 21 days of photooxidation followed by 13 days of dark conditions. Scanning electron microscopy was applied to display the morphological changes. Also, the carbonyl index, oxygen-to-carbon ratio, and contact angle were utilized to characterize the aging degree of the plastic surface. Unexpectedly, biodegradable plastics did not always display a greater aging degree than non-biodegradable plastics. Moreover, the dissolved organic carbon during the leaching process was identified using excitation-emission matrix fluorescence spectroscopy. The findings suggested that biodegradable plastics showed the potential to release more dissolved organic carbon. Particularly, the polylactic acid plastic displayed higher concentrations and more types of dissolved organic carbon release than that of conventional plastics in our experiment. This research highlights the necessity for monitoring the aging process of both biodegradable and non-biodegradable plastics and the non-negligible ecological risk of leached organic pollutants due to plastic degradation.

Intraspecific genetic lineages of a marine mussel show behavioural divergence when exposed to microplastic leachates

Worldwide, microplastic pollution has numerous negative implications for marine biota, exacerbating the effects of other forms of global anthropogenic disturbance. Mounting evidence shows that microplastics (MPs) not only cause physical damage through their ingestion, but also act as vectors for hazardous compounds by leaching absorbed and adsorbed chemicals. Research on the effects of plastic pollution has, however, largely assumed that species respond uniformly, while ignoring intraspecific diversity (i.e., variation within a single species). We investigated the effects of plastic leachates derived from factory-fresh (virgin) and beached microplastics on the behavioural responses of two genetic lineages of the Mediterranean mussel Mytilus galloprovincialis. Through laboratory behavioural experiments, we found that during exposure to leachates from beached microplastics (beached MPLs), Atlantic specimens moved significantly less than Mediterranean individuals in terms of both (i) proportion of individuals responding through movement and (ii) net and gross distances crawled. In contrast, no significant intraspecific differences were observed in the behaviour of either adults or recruits when exposed to MPLs from virgin microplastics (virgin MPLs). Additionally, the reception of cues from three amino acids (L-cysteine, proline and L-leucine) at increasing concentrations (10-5 M to 10-3 M in charcoal-filtered seawater) was tested by electrophysiological analysis using mussels exposed to beached MPLs or control seawater. We found significant intraspecific differences in response to 10-3 M L-cysteine (regardless of treatment) and 10-4 M L-cysteine (in mussels exposed to beached MPLs) and to 10-3 M proline (in mussels exposed to beached MPLs) and 10-5 M L-leucine. Our study suggests that intraspecific variation in a marine mussel may prompt different responses to plastic pollution, potentially triggered by local adaptation and physiological variability between lineages. Our work highlights the importance of assessing the effects of intraspecific variation, especially in environmental sentinel species as this level of diversity could modulate responses to plastic pollution.

Effects of near-bed turbulence on microplastics fate and transport in streams

Quantifying the impact of hyporheic exchange is crucial for understanding the transport and fate of microplastics in streams. In this study, we conducted several Computational Fluid Dynamics (CFD) simulations to investigate near-bed turbulence and analyze vertical hyporheic exchange. Different arranged spheres were used to represent rough and permeable sediment beds in natural rivers. The velocities associated with vertical hyporheic flux and the gravitational force were compared to quantify the susceptibility of microplastics to hyporheic exchange. Four scenario cases representing different channel characteristics were studied and their effects on microplastics movements through hyporheic exchange were quantitatively studied. Results show that hyporheic exchange flow can significantly influence the fate and transport of microplastics of small and light-weighted microplastics. Under certain conditions, hyporheic exchange flow can dominate the behavior of microplastics with sizes up to around 800 μm. This dominance is particularly evident near the sediment-water interface, especially at the top layer of sediments. Higher bed porosity enhances the exchange of microplastics between water and sediment, while increased flow conditions extend the vertical exchange zone into deeper layers of the bed. Changes in the bedform lead to the most pronounced vertical hyporheic exchange, emphasizing the control of morphological features on microplastics transport. Furthermore, it is found that sweep-ejection events are prevailing near the bed surface, serving as a mechanism for microplastics transport in rivers. As moving from the water column to deeper layers in the sediment bed, there's a shift from sweeps dominance to ejections dominance, indicating changes of direction in microplastics movement at different locations.

Using eRNA/eDNA metabarcoding to detect community-level impacts of nanoplastic exposure to benthic estuarine ecosystems

Plastic particles are ubiquitous in marine systems and fragment into smaller pieces, such as nanoplastics (NPs). The effects of NPs on marine organisms are of growing concern but are not well understood. Marine sediments act as a sink for many contaminants, like microplastics, and are rich habitats for benthic micro- and meiofauna which are ecologically-important components of marine food webs; however, little is known about the sensitivities of specific organisms to NPs or the effects on community diversity and composition. Utilizing molecular methods, such as metabarcoding of environmental DNA/RNA, allows for the rapid and comprehensive detection of microscopic organisms via high-throughput sequencing to assess adverse effects at the community level. The objective of this study was to use a metabarcoding approach to investigate the effects of NPs on benthic micro- and meiofaunal community diversity. Mesocosms were created with sediment cores collected from the Narrow River estuary (Rhode Island, USA) and exposed to 900 nm diameter weathered polystyrene beads at concentrations of 0.1, 1, 10, or 100 mg/kg dry weight in sediment for two weeks. Following exposure, RNA and DNA were co-extracted from the sediment, RNA was reverse-transcribed, 18S and COI markers were PCR-amplified, and amplicons were sequenced on an Illumina MiSeq. Using the 18S marker and eRNA template, increases to α-diversity and significant differences to β-diversity were observed in the highest NP exposures relative to the control. Observed differences in community composition were driven by the differential abundance of several types of protists and arthropods. Significant dose-dependent shifts in composition were observed in β-diversity Jaccard and Unweighted-Unifrac metrics with the 18S marker using the RNA template. To our knowledge, this is the first demonstration of a dose-response relationship for NPs at a community level, and it highlights the value of using community-level endpoints to assess environmental impacts of nanoparticles.

Impact of 3D printing materials on mircoalga Chlorella vulgaris

3D printing represents a key enabling technology in designing photobioreactors. It allows rapid prototyping of complex geometries at an affordable price. Yet, no study dealt with the biocompatibility of 3D printing material with microalgae. Thus microalga Chlorella vulgaris was cultivated in contact with different 3D printing materials (Acrylonitrile Butadiene Styren - ABS, PolyCarbonate Blend - PC-Blend, PolyLactic acid - PLA, and acrylate methacrylate resin). Cell status was analyzed using flow cytometry, fluorometry, and pigment profiling. Results revealed that acrylate methacrylate resin material inhibits growth, a constant rise in intracellular reactive oxygen species, and a decrease in photosynthetic apparatus functioning. On the contrary, ABS, PC-Blend, and PLA led to nominal perfromances. Nevertheless, PLA was the only material that did not induce an early onset of intracellular reactive oxygen species. Therefore, resin can be ruled out as photobioreactor material, ABS and PC-Blend could be used after a curation period, and PLA induces no detectable perturbations by the means used in this study.

Seasonal variations of microplastic in sediment, Chironomus sp. larvae, and chironomid tubes in two wastewater sites in Sohag Governorate, Egypt

Microplastic (MP) contamination is an acknowledged global problem that poses a severe risk to aquatic ecosystem biota. Nevertheless, little is known about their prevalence in animal construction. The main objective of our study was to reduce the gap information of seasonal abundance, distribution, composition, and risk assessment of MP contamination. The concentrations of MPs in sediment, Chironomus sp. larvae, and their tubes were found to be higher in site 2 (S2) than in site 1 (S1) during the four seasons of the year. However, MP concentrations ranged from 312 ± 64.7 to 470 ± 70 items/kg dry weight, 0.79 ± 0.16 to 1.1 ± 0.3 particles/individual, and 0.5 ± 0.04 to 0.9 ± 0.04 particles/tube in sediment, Chironomus, and chironomid tubes, respectively. Blue and red polyester fibers are the most dominant MPs which are distributed in sediment, Chironomus, and chironomid tubes. The length of the dominant fiber accumulates in Chironomus, and their tubes are highly varied compared to that of the substrate. Additionally, we found that the mean number of MPs/individual larvae in the fourth instar was significantly higher than that in the second instar. Risk indicators for the environment, polymer risk assessment, and pollution load were estimated, where they were higher in S2 than in S1 correlated to MPs abundance and polymer type. The seasonal fluctuation in MP concentration, characterization, and risk in the two sites could depend on the amount of sewage effluent discharged into the wastewater treatment plants (WWTPs), which was reflected by Chironomus sp. larvae. Therefore, further research should be done to adopt the applicability of Chironomus as MP bioindicators in various freshwater environments throughout the world.

Interactions between microplastics and contaminants: A review focusing on the effect of aging process

Microplastics (MPs) in the environment are a major global concern due to their persistent nature and wide distribution. The aging of MPs is influenced by several processes including photodegradation, thermal degradation, biodegradation and mechanical fragmentation, which affect their interaction with contaminants. This comprehensive review aims to summarize the aging process of MPs and the factors that impact their aging, and to discuss the effects of aging on the interaction of MPs with contaminants. A range of characterization methods that can effectively elucidate the mechanistic processes of these interactions are outlined. The rate and extent of MPs aging are influenced by their physicochemical properties and other environmental factors, which ultimately affect the adsorption and aggregation of aged MPs with environmental contaminants. Pollutants such as heavy metals, organic matter and microorganisms have a tendency to accumulate on MPs through adsorption and the interactions between them impact their environmental behavior. Aging enhances the specific surface area and oxygen-containing functional groups of MPs, thereby affecting the mechanism of interaction between MPs and contaminants. To obtain a more comprehensive understanding of how aging affects the interactions, this review also provides an overview of the mechanisms by which MPs interact with contaminants. In the future, there should be further in-depth studies of the potential hazards of aged MPs in different environments e.g., soil, sediment, aquatic environment, and effects of their interaction with environmental pollutants on human health and ecology.

A review of recent progress in the application of Raman spectroscopy and SERS detection of microplastics and derivatives

The global environmental concern surrounding microplastic (MP) pollution has raised alarms due to its potential health risks to animals, plants, and humans. Because of the complex structure and composition of microplastics (MPs), the detection methods are limited, resulting in restricted detection accuracy. Surface enhancement of Raman spectroscopy (SERS), a spectral technique, offers several advantages, such as high resolution and low detection limit. It has the potential to be extensively employed for sensitive detection and high-resolution imaging of microplastics. We have summarized the research conducted in recent years on the detection of microplastics using Raman and SERS. Here, we have reviewed qualitative and quantitative analyses of microplastics and their derivatives, as well as the latest progress, challenges, and potential applications.

Unveiling the effect of microplastics on agricultural crops - a review

Microplastics (MPs), ever since they were identified as a potential and widely distributed persistent contaminant, the number of studies highlighting their impacts on various terrestrial ecosystems have been increasing. Recently, the effect of MPs on the agricultural ecosystem has gained momentum. Hence, the present review examines the impact of microplastics on agricultural crop systems and the mechanism underlying its toxicity. The current review revealed that most of the studies were conducted at a laboratory scale and under controlled conditions. Additionally, it was observed that polystyrene (PS) followed by polyethylene (PE) are the most studied polymer type, while the most studied plants are wheat and maize. Hitherto, literature studies suggest that the microplastics' influence on plant growth can be negative or sometimes neutral; while in some cases it exerts a hormetic effect which depends on other factors determining plant growth. Notably, the main mechanisms through which microplastics influence plant growth are mechanical damage, alteration of soil properties, or by leaching of additives. Overall, with burgeoning research interest in this aspect, the current review has significant implications for the toxicity of MPs on plants and throws light on the need to develop novel guidelines toward the sustainable use of plastics in agricultural sector. However, realistic field-level studies and estimating the MPs concentration at various region are essential to develop remediation approaches. Future studies should also focus on translocation and accumulation of micron sized MPs in edible portion of crops and their effect on food safety.

Microplastics in the environment: An urgent need for coordinated waste management policies and strategies

Microplastics (MPs) have become a prevalent environmental concern, exerting detrimental effects on marine and terrestrial ecosystems, as well as human health. Addressing this urgent issue necessitates the implementation of coordinated waste management policies and strategies. In this study, we present a comprehensive review focusing on key results and the underlying mechanisms associated with microplastics. We examine their sources and pathways, elucidate their ecological and human health impacts, and evaluate the current state of waste management policies. By drawing upon recent research and pertinent case studies, we propose a range of practical solutions, encompassing enhanced recycling and waste reduction measures, product redesign, and innovative technological interventions. Moreover, we emphasize the imperative for collaboration and cooperation across sectors and jurisdictions to effectively tackle this pressing environmental challenge. The findings of this study contribute to the broader understanding of microplastics and provide valuable insights for policymakers, researchers, and stakeholders alike.

Comparative toxicity of conventional versus compostable plastic consumer products: An in-vitro assessment

This study investigates the toxicity of methanolic extracts obtained from compostable plastics (BPs) and conventional plastics (both virgin and recycled). Additionally, it explores the potential influence of plastic photodegradation and composting on toxic responses using a battery of in vitro assays conducted in PLHC-1 cells. The extracts of BPs, but not those of conventional plastics, induced a significant decrease in cell viability (<70%) in PLHC-1 cells after 24 h of exposure. Toxicity was enhanced by either photodegradation or composting of BPs. Extracts of conventional plastics, and particularly those of recycled plastics, induced 7-ethoxyresorufin-O-deethylase (EROD) activity and micronucleus formation in exposed cells, indicating the presence of significant amounts of CYP1A inducers and genotoxic compounds in the extracts, which was enhanced by photodegradation. These findings highlight the importance of investigating the effects of degradation mechanisms such as sunlight and composting on the toxicity of BPs. It is also crucial to investigate the composition of newly developed formulations for BPs, as they may be more harmful than conventional ones.

Synergistic analysis of performance, microbial community, and metabolism in aerobic granular sludge under polyacrylonitrile microplastics stress

Aerobic granular sludge (AGS) has proved to be a promising biotechnology for microplastics wastewater treatment. However, polyacrylonitrile microplastics (PAN MPs), the most widely used plastic in textile materials, have not been investigated. Therefore, the effect of the neglected PAN MPs on AGS at different concentrations (1, 10, and 100 mg/L) was evaluated. The results indicated that PAN MPs with 1 and 10 mg/L concentrations had no obvious effect on granular stability and nutrient removal performance, but greatly promoted the secretion of EPS. Remarkably, the granule structure was severely damaged under 100 mg/L PAN MPs. Moreover, microbial community analysis showed that phylum Proteobacteria played a dominant role in resistance to PAN MPs. Metabolic analysis further revealed that genes related to denitrification pathway (nasA, nirK, nirS and norB) and membrane transport were significantly inhibited under PAN MPs stress. This study may provide additional information on the treatment of microplastics wastewater using AGS.

Physical and chemical effects of conventional microplastic glitter versus alternative glitter particles on a freshwater plant (Lemnaceae: Lemna minor)

Glitters are primary microplastics which are directly littered into the environment, yet the ecological effects have seldom been tested. When microplastics enter the environment, their physical presence and chemical leachate may alter the physiology of primary producers. Glitter can be composed of plastic or natural and/or biodegradable materials, often with additives. Three experiments were run for 14 days to separate chemical and physical effects of different types of glitter: polyethylene terephthalate (PET), biodegradable modified regenerated cellulose (MRC), synthetic mica, and a natural particle control (kaolinite) on several physical characteristics of Lemna minor (common duckweed). L. minor was exposed to either fresh (chemical and physical effects), leachate from glitter (chemical) or aged glitter (physical). Overall, there was little effect of PET, synthetic mica, kaolinite or of any aged glitter. High concentrations of fresh MRC glitters, however, decreased root length, biomass and chlorophyll content of L. minor. Some of these effects were also present when exposed to leachate from MRC glitters, but were less pronounced. Elemental analysis revealed the presence of metals in MRC glitters which may explain these responses. Short-term ecotoxicity of biodegradable glitters can arise due to their physical and chemical properties, but may lessen over time as their surface coating degrades.

Ecological traits do not predict the uptake of microplastics by fishes in a Neotropical River

Pollution by synthetic polymers is even more problematic to the environment when this material is fragmented into small portions, forming microplastics (MPs). We analyzed the contamination of ichthyofauna by MPs in an important river of the Atlantic Rainforest in regard to abundance, diversity of morphotypes, polymers, colors, and sizes of the synthetic particles in 20 species of fish. Fish were collected in November 2019 and in March 2020 in five sites along the Pomba River. Of the 101 fish analyzed, 49 (49%) presented MPs in at least one organ. Of the 20 species of fish collected 13 included individuals with at least one MP in their analyzed organs. The organs, trophic categories and feeding areas did not affect the general abundance of MPs types. Blue MPs were predominant, followed by the colors black, red, and white. MP fibers represented 91% of total MPs. Most MPs were between 2 and 3 mm in size. Polyethylene terephthalate (PET), polypropylene (PP), polyamide (PA), polyvinylidene chloride "Nylon" (PVDC), and high-density polyethylene (HDPE) were detected in the fishes. The exposure of the fish species to MPs was associated mainly with individual size and species-specific aspects, regardless of ecological traits. Considering that 55% of the fish species studied are consumed by humans, it is necessary to study the potential impact of MP ingestion on human health and to understand to what extent we may be consuming both plastic particles and contaminants that are adsorbed to MPs.

Effects of organic additives on spectroscopic and molecular-level features of photo-induced dissolved organic matter from microplastics

The environmental occurrence and impact of dissolved organic matter leached from microplastics (MP-DOM) has been the subject of increased research interest. Commercial plastics, which typically contain additives, are subject to natural weathering processes and can eventually lose their additives. However, the effects of organic additives in commercial microplastics (MPs) on the release of MP-DOM under UV irradiation remain poorly understood. In this study, four polymer MPs (polyethylene; PE, polypropylene; PP, polystyrene; PS, polyvinylchloride; PVC) and four commercial MPs, including a PE zip bag, a PP facial mask, a PVC sheet, Styrofoam, were subjected to leaching under UV irradiation, and the MP-DOM was characterized using Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR-MS) and fluorescence excitation emission matrix-parallel factor analysis (EEM-PARAFAC). Although UV light promoted the leaching of MP-DOM from both MP groups, the amount released was more pronounced for the polymer MPs than for the commercial MPs. The commercial MP-DOM was characterized by a prominent protein/phenol-like component (C1), while a humic-like component (C2) prevailed in the polymer MPs. FT-ICR-MS identified a higher number of unique molecular formulas for the commercial than for the polymer MP-DOM. The unique molecular formulas of commercial MP-DOM included known organic additives and other breakdown products, while the polymer MP-DOM featured more pronounced unsaturated carbon structures in its identified unique formulas. Several molecular-level parameters showed significant correlations with fluorescence properties, such as CHO formulas (%) with C1 and condensed aromatic structure (CAS-like, %) with C2, suggesting the potential application of fluorescent components as an optical descriptor for the complex molecular-level composition. This study also revealed the possible high environmental reactivity of both polymer MPs and fully weathered plastics due to the unsaturated structures generated in sunlit environments.

Microplastics and nanoplastics toxicity assays: A revision towards to environmental-relevance in water environment

Plastic pollution poses a serious risk to the oceans, freshwater ecosystems, and land-based agricultural production. Most plastic waste enters rivers and then reaches the oceans, where its fragmentation process begins and the forming of microplastics (MPs) and nanoplastics (NPs). These particles increase their toxicity by the exposition to external factors and binding environmental pollutants, including toxins, heavy metals, persistent organic pollutants (POPs), halogenated hydrocarbons (HHCs), and other chemicals, which further and cumulatively increase the toxicity of these particles. A major disadvantage of many MNPs in vitro studies is that they do not use environmentally relevant microorganisms, which play a vital role in geobiochemical cycles. In addition, factors such as the polymer type, shapes, and sizes of the MPs and NPs, their exposure times and concentrations must be taken into account in in vitro experiments. Last but not least, it is important to ask whether to use aged particles with bound pollutants. All these factors affect the predicted effects of these particles on living systems, which may not be realistic if they are insufficiently considered. In this article, we summarize the latest findings on MNPs in the environment and propose some recommendations for future in vitro experiments on bacteria, cyanobacteria, and microalgae in water ecosystems.

Environmental occurrence and ecotoxicity of aquaculture-derived plastic leachates

Plastic products such as fishing nets and foam buoys have been widely used in aquaculture. To enhance the desirable characteristics of the final equipment, plastic gear for aquaculture is mixed with a wide range of additives. Recent studies have shown that additives could be leached out to the environment with a long-term use of aquaculture plastics, forming aquaculture-derived plastic leachates. It should be emphasized that some leachates such as phthalic acid esters (PAEs) and organophosphate esters (OPEs) are endocrine disruptors, which could increase the exposure risk of aquatic products and subsequently display potential threats to human health via food chain. However, systematic studies on the release, occurrence, bioaccumulation, and toxic effects of aquaculture-derived plastic leachates are missing, overlooking their potential sources and ecotoxicological risks in aquatic environments. We have reviewed and compared the concentrations of major plastic leachates in the water environment and organisms of global aquaculture and non-farmed areas, confirming that aquaculture leachate is an important source of contaminants in the environment. Moreover, the toxic effects of aquaculture-derived plastic additives and the related mechanisms are summarized with fish as a representative, revealing their potential health risk. In addition, we proposed current challenges and future research needs, which provides scientific guidance for the use and management of plastic products in aquaculture industries.

Interference Effects of Commercial Persistent Luminescence Materials on Rice Germination and Seedling Growth

Persistent luminescence materials (PLMs) are widely used across a multitude of fields due to their distinct optical properties. However, like other micron-sized materials such as microplastics, the production and recycling processes of PLMs can lead to their accumulation in soil and water, potentially posing detrimental effects on plant growth and development. In this study, we investigated the impact of commercially available blue PLM (bPLM), green PLM (gPLM), and red PLM (rPLM) on germination, seedling growth, and oxidative stress responses in rice. Our findings demonstrate that the morphology and size of PLMs do not significantly differ in their effects on rice growth. All three types of PLMs significantly inhibited root length and stem length, disrupted root cell structures, and decreased seedling biomass. Interestingly, gPLM and bPLM were found to stimulate the synthesis of osmolytes and chlorophyll in rice, while rPLM had the opposite effect. Changes in the antioxidant enzyme system in rice clearly indicated that the three types of PLMs induced reactive oxygen species (ROS) damage in rice. This study enhances our understanding of the potential environmental impacts of PLMs, offering valuable insights for the safe and responsible use of these materials in various applications.

Interactions between white and black carbon in water: A case study of concurrent aging of microplastics and biochar

Microplastics and biochar, as particulate matter that is prevalent in the water environment, will inevitably encounter and interact with each other during environmental aging. The potential interaction of microplastics and biochar, and the associated impact on their environmental behavior remains largely unknown. In this study, we exposed microplastics and biochar concurrently to ultraviolet light to mimic the aging process, investigated the release and fluorescence characteristics of dissolved organic matter (DOM) in water, and analyzed the effects of co-existing microplastics and biochar on their sorption of organic contaminants. We demonstrate that early-stage interactions of microplastics and biochar could entangle to promote the release of DOM from biochar, while their long-term interactions after light irradiation resulted in the sorption of hydrophobic and small molecules of microbial byproduct-like DOM. Simultaneously, early-stage interactions of microplastics and biochar showed a promotion for sorption of organic contaminants with an increase of 5.3-17.7%. After aging, however, long-term interactions between microplastics and biochar made it no longer promote the sorption of organic contaminants due to the influence of heterogeneous aggregation. Our results provide new insights into the time-dependent interactions between microplastics and biochar and highlight the need to incorporate their interactions into future environmental risk assessments for microplastics in the water environment.

Microplastics and leachate materials from pharmaceutical bottle: An in vivo study in Donax faba (Marine Clam)

Most pharmaceuticals are stored in synthetic polymer bottles, manufactured using polyethylene as the base material. The toxicological impact of pharmaceutical container leachate was studied on Donax faba. Several organics and inorganics were identified from the leachate. The concentrations of heavy metals in the leachate was higher than standard reference value for drinking water. In the leachate treatment the protein concentration increased to 8.5% more than the control. The reactive oxygen species (ROS) level elevated by 3 folds and malondialdehyde (MDA) increased by 4.3% in comparison to the control. Superoxide dismutase (SOD) and catalase (CAT) showed a decrease by 14 and 70.5% respectively. The leachate affected the antioxidant machinery of D. faba. Similarly, these PET (polyethylene terephthalate) pharmaceutical containers could potentially leach additives into the drugs and may cause oxidative and metabolic damages to higher organisms including human beings.

Micro- and nanoplastic toxicity: A review on size, type, source, and test-organism implications

Polymeric wastes are among the current major environmental problems due to potential pollution and contamination. Within the spectrum of polymeric waste, microplastics (MPs) and nanoplastics (NPs) have gained ground in recent research since these particles can affect the local biota, inducing toxic effects on several organisms. Different outcomes have been reported depending on particle sizes, shape, types, and exposed organisms and conditions, among other variables. This review aimed to compile and discuss the current knowledge and possible literature gaps regarding the MPs and NPs generation and their toxicological effects as stressors, considering polymer type (as polyethylene, polypropylene, polyethylene terephthalate, polystyrene, polyvinyl chloride, or others), size (micro- or nano-scale), source (commercial, lab-synthesized, or environmental) and test organism group. In that sense, 615 publications were analyzed, among which 72 % discussed micro-sized plastics, while <28 % assayed the toxicity of NPs (<1 μm). For most polymers, MPs and NPs were commercially purchased and used without additional size reduction processes; except for polyethylene terephthalate studies that mostly used grinding and cutting methods to obtain MPs. Polystyrene (PS) was the main polymer studied, as both MPs and NPs. PS accounts for >90 % of NPs reports evaluated, reflecting a major literature gap if compared to its 35.3 % share on MPs studies. Among the main organisms, arthropods and fish combined accounted for nearly 40 % of toxicity testing. Overall, the different types of plastics showed a tendency to report toxic effects, except for the 'Survival/lethality' category, which might indicate that polymeric particles induce mostly sublethal toxic effects. Furthermore, despite differences in publication numbers, we observed greater toxicity reported for NPs than MPs with oxidative stress among the majorly investigated endpoints. This study allowed a hazard profile overview of micro/nanoplastics (MNPs) and the visualization of literature gaps, under a broad diversity of toxicological evidence.

The disinfectant residues promote the leaching of water contaminants from plastic pipe particles

Disinfection treatment is an indispensable water purification process, but it can leave trace concentrations of disinfectant in the purified water. Disinfectants oxidation can age plastic pipes and release hazardous microplastics and chemicals into drinking water. Lengths of commercially-available unplasticized polyvinyl chloride and polypropylene random copolymer water pipe were ground into particles and exposed to micro-molar concentrations of ClO₂, NaClO, trichloroisocyanuric acid, or O₃ for up to 75 days. The disinfectants aged the plastic and changed its surface morphology and functional groups. Meanwhile, disinfectants could significantly promote the release of organic matter from plastic pipes into the water. ClO₂ generated the highest concentrations of organic matter in the leachates from both plastics. Plasticizers, antioxidants and low molecular weight organic matter were detected in all of the leachates. Leachate samples inhibited the proliferation of CT26 mouse colon cancer and induced oxidative stress in the cells. Even trace concentrations of residual disinfectant can constitute a drinking water risk.

Species sensitivity distributions of micro- and nanoplastics in soil based on particle characteristics

Micro- and nanoplastics are released into the soil through various anthropogenic activities; however, research on ecological risk assessment (ERA) of soil microplastics is limited. In this study, the species sensitivity distributions (SSDs) of representative groups of soil biota were analyzed to determine their sensitivity to microplastic properties. A total of 411 datasets from apical endpoint data within 74 studies were classified and utilized in SSD estimation. The hazardous concentrations for 5% of species for microplastics was 88.18 (40.71-191.00) mg/kg soil. It has been established that small-sized microplastics are more toxic to soil organisms than larger microplastics. Most microplastics were spherical and polystyrene, exhibiting the most adverse effects among all the microplastic types assessed herein. The results suggest that physical characteristics of microplastics are important toxicity determinants in soil ecosystems. Given the potential for adverse environmental effects, further effective management strategies should urgently be employed in these areas. This study provided an integrated perspective of microplastic ecotoxicity in soil. In addition, SSDs were estimated using larger datasets and for more species than in previous studies. This is the first study to consider microplastic properties for estimating SSD.

The complexity of micro- and nanoplastic research in the genus Daphnia - A systematic review of study variability and a meta-analysis of immobilization rates

In recent years, the number of publications on nano- and microplastic particles (NMPs) effects on freshwater organisms has increased rapidly. Freshwater crustaceans of the genus Daphnia are widely used in ecotoxicological research as model organisms for assessing the impact of NMPs. However, the diversity of experimental designs in these studies makes conclusions about the general impact of NMPs on Daphnia challenging. To approach this, we systematically reviewed the literature on NMP effects on Daphnia and summarized the diversity of test organisms, experimental conditions, NMP properties and measured endpoints to identify gaps in our knowledge of NMP effects on Daphnia. We use a meta-analysis on mortality and immobilization rates extracted from the compiled literature to illustrate how NMP properties, study parameters and the biology of Daphnia can impact outcomes in toxicity bioassays. In addition, we investigate the extent to which the available data can be used to predict the toxicity of untested NMPs based on the extracted parameters. Based on our results, we argue that focusing on a more diverse set of NMP properties combined with a more detailed characterization of the particles in future studies will help to fill current research gaps, improve predictive models and allow the identification of NMP properties linked to toxicity.

Photoaging process and mechanism of four commonly commercial microplastics

Microplastics (MPs) are the widespread emerging pollutants in the terrestrial systems, and photo-oxidation is an effective process for aging MPs on land. Here, four common commercial MPs were exposed to ultraviolet (UV) light to simulate the photo-aging of MPs on soil, and the changes in surface properties and eluates of photoaging MPs were studied. Results revealed that polyvinyl chloride (PVC) and polystyrene (PS) exhibited more pronounced physicochemical changes than polypropylene (PP) and polyethylene (PE) during photoaging on the simulated topsoil, due to the dechlorination of PVC and the debenzene ring of PS. Oxygenated groups accumulated in aged MPs were strongly correlated with dissolved organic matters (DOMs) leaching. Through analysis of the eluate, we found that photoaging altered the molecular weight and aromaticity of DOMs. PS-DOMs showed the greatest increase in humic-like substances after aging, whereas PVC-DOMs exhibited the highest amount of additive leaching. The chemical properties of additives explained their differences in photodegradation responses, which also accounted for the greater importance of chemical structure of MPs to their structural stability. These findings demonstrate that the extensive presence of cracks in aged MPs facilitates DOMs formation and the complexity of DOMs composition poses a potential threat to soil and groundwater safety.

Effect of aging of microplastics on gene expression levels of the marine mussel Mytilus edulis: Comparison in vitro/in vivo exposures

In the present study, effects of aging MPs of polyethylene (PE) were investigated in the marine mussel Mytilus edulis, commonly used as bioindicator of aquatic ecosystem, using both in vitro and in vivo exposures, using concentrations found in marine waters (0.008, 10 and 100 μg.L-1). Changes in gene expression levels implicated in detoxification, immune system, cytoskeletton and cell cycle control were evaluated by quantitative RT-qPCR. Results demonstrated differential expression levels depending upon the state of plastic degradation (aged vs non-aged) and way of exposure (vitro vs vivo). This study highlighted the interest of using molecular biomarkers based on analysis of gene expression pattern in an ecotoxicological context that gives indication of relative slight changes between tested conditions as compared to other biochemical approaches (e.g. enzymatic activities). In addition, in vitro analysis could be used to generate large amount of data as regards to the toxicological effects of MPs.

Dissolved organic matter derived from biodegradable microplastic promotes photo-aging of coexisting microplastics and alters microbial metabolism

Dissolved organic matter (DOM) leaching from biodegradable microplastics (BMPs) and its characteristics and corresponding environmental implication are rarely investigated. In this study, the main component of DOM leachate from the two BMPs (polyadipate/butylene terephthalate (PBAT)/polycaprolactone (PCL)) was verified by using excitation-emission matrix-parallel factor analysis (EEM-PARAFAC). The PBAT-DOM (PBOM) was aromatized and terrestrial. Comparatively, PCL-DOM (PLOM) had low molecular weight. PBOM contained protein-like components while PLOM contained tryptophan and tyrosine components. Interestingly, both PBOM and PLOM could accelerate the decomposition and oxidation of coexisting polystyrene (PS) under light irradiation. Further, the difference in composition and the properties of BMPs-DOM significantly affected its photochemical activity. The high territoriality and protein-like component of PBOM significantly promoted the generation of ¹O₂ and O₂^•-, which caused faster disruptions to the backbone of PS. Simultaneously, the microbial community's richness, diversity, and metabolism were obviously improved under the combined pressure of aged PS and BMPs-DOM. This study threw light on the overlooked contribution of DOM derived from BMPs in the aging process of NMPs and their impact on the microbial community and provided a promising strategy for better understanding of combined MPs' fate and environmental risk.