Antiviral drugs in aquatic environment and wastewater treatment plants: A review on occurrence, fate, removal and ecotoxicity

The behavior of pharmaceutically active compounds and contrast agents during wastewater treatment - Combining sampling strategies and analytical techniques: A critical review

Increasing consumption of pharmaceuticals and the respective consequences for the aquatic environment have been the focus of many studies over the last thirty years. Various aspects in this field were investigated, considering diverse pharmaceutical groups and employing a wide range of research methodologies. Various questions from the perspectives of different research areas were devised and answered, resulting in a large mix of individual findings and conclusions. Collectively, the results of the studies offer a comprehensive overview. The large variety of methods and strategies, however, demands close attention when comparing and combining information from heterogeneous projects. This review critically examines the application of diverse sampling techniques as well as analytical methods in investigations concerning the behavior of pharmaceutically active compounds (PhACs) and contrast agents (CAs) in wastewater treatment plants (WWTPs). The combination of sampling and analysis is discussed with regard to its suitability for specific scientific problems. Different research focuses need different methods and answer different questions. An overview of studies dealing with the fate and degradation of PhACs and CAs in WWTPs is presented, discussing their strategic approaches and findings. This review includes surveys of anticancer drugs, antibiotics, analgesics and anti-inflammatory drugs, antidiabetics, beta blockers, hormonal contraceptives, lipid lowering agents, antidepressants as well as contrast agents for X-ray and magnetic resonance imaging.

Toxic mechanisms of the antiviral drug arbidol on microalgae in algal bloom water at transcriptomic level

Increasing antivirals in surface water caused by their excessive consumption pose serious threats to aquatic organisms. Our recent research found that the input of antiviral drug arbidol to algal bloom water can induce acute toxicity to the growth and metabolism of Microcystis aeruginosa, resulting in growth inhibition, as well as decrease in chlorophyll and ATP contents. However, the toxic mechanisms involved remained obscure, which were further investigated through transcriptomic analysis in this study. The results indicated that 885-1248 genes in algae were differentially expressed after exposure to 0.01-10.0 mg/L of arbidol, with the majority being down-regulated. Analysis of commonly down-regulated genes found that the cellular response to oxidative stress and damaged DNA bonding were affected, implying that the stress defense system and DNA repair function of algae might be damaged. The down-regulation of genes in porphyrin metabolism, photosynthesis, carbon fixation, glycolysis, tricarboxylic acid cycle, and oxidative phosphorylation might inhibit chlorophyll synthesis, photosynthesis, and ATP supply, thereby hindering the growth and metabolism of algae. Moreover, the down-regulation of genes related to nucleotide metabolism and DNA replication might influence the reproduction of algae. These findings provided effective strategies to elucidate toxic mechanisms of contaminants on algae in algal bloom water.

Hazards of antiviral contamination in water: Dissemination, fate, risk and their impact on fish

Antiviral drugs are a cornerstone in the first line of antiviral therapy and their demand rises consistently with increments in viral infections and successive outbreaks. The drugs enter the waters due to improper disposal methods or via human excreta following their consumption; consequently, many of them are now classified as emerging pollutants. Hereby, we review the global dissemination of these medications throughout different water bodies and thoroughly investigate the associated risk they pose to the aquatic fauna, particularly our vertebrate relative fish, which has great economic and dietary importance and subsequently serves as a major doorway to the human exposome. Our risk assessment identifies eleven such drugs that presently pose high to moderate levels of risk to the fish. The antiviral drugs are likely to induce oxidative stress, alter the behaviour, affect different physiological processes and provoke various toxicological mechanisms. Many of the compounds exhibit elevated bioaccumulation potential, while, some have an increased tendency to leach through soil and contaminate the groundwater. Eight antiviral medications show a highly recalcitrant nature and would impact the aquatic life consistently in the long run and continue to influence the human exposome. Thereby, we call for urgent ecopharmacovigilance measures and modification of current water treatment methods.

Recent advances in photocatalytic removal of antiviral drugs by Z-scheme and S-scheme heterojunction

The possible impact of antivirals on ecosystems and the emergence of antiviral resistance are the reasons for concern about their environmental release. Consequently, there has been a significant increase in curiosity regarding their presence in both organic and synthetic systems in recent years. The primary objective of this review is to address the void of information regarding the global presence of antiviral drugs in both wastewater and natural water sources. Photocatalytic degradation of pollutants is an eco-friendly, cost-effective method that effectively addresses environmental degradation. The development of efficient photocatalysts remains a significant issue in accelerating the degradation of pollutants, especially when employing solar light. Thus, the development of Z-scheme and S-scheme semiconductor heterojunctions has emerged as a viable method to improve light absorption and enhance the redox capability of photocatalysts. The principles of Z-scheme and S-scheme are reviewed extensively. The degradation route and occurrence of antiviral are discussed briefly. Finally, a short preview of the degradation of antiviral using Z-scheme and S-scheme is also highlighted.

Anthropogenic-induced ecological risks on marine ecosystems indicated by characterizing emerging pollutants in Pearl River Estuary, China

Anthropogenic Contaminants of Emerging Concern (CECs) in marine environments have raised significant concerns. Yet, analyses detailing their origins, fate, and environmental effects are limited. This study employs an integrated non-target screening methodology to elucidate CECs existence across 46 sampling sites in the Pearl River Estuary (PRE) of the South China Sea. Assisted by advanced liquid chromatography-high resolution mass spectrometry, we discovered 208 chemicals in six usage categories, with pesticides (33 %) and pharmaceuticals (29 %) predominating. Several CECs drew attention for their consistent detections, profound abundance, and significant ecotoxicities. The wide detection of them at offshore sites further implies that anthropogenic activities may contribute to large-scale contamination. Meanwhile, distinct distribution patterns of CECs across PRE are evident in semi-quantitative results, indicating regional anthropogenic influences. Identified transformation products may establish a novel and non-negligible negative contribution to ecology through elevated environmental toxicities, exemplified by HMMM and atrazine. Based on the ecological risks, we compiled a prioritized list of 21 CECs warranting intensified scrutiny. Our findings indicate the introduction of various CECs into the South China Sea via PRE, emphasizing the urgent necessity for ongoing surveillance of discharged CECs at estuary areas and assessment of their marine ecological consequences.

Green synthesis of chitosan-encapsulated CuO nanocomposites for efficient degradation of cephalosporin antibiotics in contaminated water

The synthesis and characterization of chitosan encapsulated copper oxide nanocomposites (CuNPs) using plant extracts for the photocatalytic degradation of second-generation antibiotics, cefixime and cefuroxime, were investigated. The study revealed that the presence of diverse chemical components in the plant extract significantly influenced the size of the CuNPs, with transmission electron microscopy (TEM) showing spherical shapes and sizes ranging from 11-35 nm. The encapsulation process was confirmed by an increase in size for certain samples, indicating successful encapsulation. X-ray photoelectron spectroscopy (XPS) analysis further elucidated the chemical makeup, confirming the valency state of Cu2+ and the presence of Cu-O bonding, with no contaminants detected. Photocatalytic activity assessments demonstrated that the copper oxide nanocomposites exhibited significant degradation capabilities against both antibiotics under UV light irradiation, with encapsulated nanocomposites (EnCu30) showing up to 96.18% degradation of cefuroxime within 60 min. The study highlighted the influence of chitosan encapsulation on enhancing photocatalytic performance, attributed to its high adsorption capability. Recycling studies confirmed the sustainability of the Cu nanocomposites, maintaining over 89% degradation rate after five consecutive cycles. This research underscores the potential of green-synthesized CuNPs as efficient, stable photocatalysts for the degradation of harmful antibiotics, contributing to environmental sustainability and public health protection.

The environmental risks of antiviral drug arbidol in eutrophic lake: Interactions with Microcystis aeruginosa

The environmental risks resulting from the increasing antivirals in water are largely unknown, especially in eutrophic lakes, where the complex interactions between algae and drugs would alter hazards. Herein, the environmental risks of the antiviral drug arbidol towards the growth and metabolism of Microcystis aeruginosa were comprehensively investigated, as well as its biotransformation mechanism by algae. The results indicated that arbidol was toxic to Microcystis aeruginosa within 48 h, which decreased the cell density, chlorophyll-a, and ATP content. The activation of oxidative stress increased the levels of reactive oxygen species, which caused lipid peroxidation and membrane damage. Additionally, the synthesis and release of microcystins were promoted by arbidol. Fortunately, arbidol can be effectively removed by Microcystis aeruginosa mainly through biodegradation (50.5% at 48 h for 1.0 mg/L arbidol), whereas the roles of bioadsorption and bioaccumulation were limited. The biodegradation of arbidol was dominated by algal intracellular P450 enzymes via loss of thiophenol and oxidation, and a higher arbidol concentration facilitated the degradation rate. Interestingly, the toxicity of arbidol was reduced after algal biodegradation, and most of the degradation products exhibited lower toxicity than arbidol. This study revealed the environmental risks and transformation behavior of arbidol in algal bloom waters.

A review of organophosphonates, their natural and anthropogenic sources, environmental fate and impact on microbial greenhouse gases emissions - Identifying knowledge gaps

Organophosphonates (OPs) are a unique group of natural and synthetic compounds, characterised by the presence of a stable, hard-to-cleave bond between the carbon and phosphorus atoms. OPs exhibit high resistance to abiotic degradation, excellent chelating properties and high biological activity. Despite the huge and increasing scale of OP production and use worldwide, little is known about their transportation and fate in the environment. Available data are dominated by information concerning the most recognised organophosphonate - the herbicide glyphosate - while other OPs have received little attention. In this paper, a comprehensive review of the current state of knowledge about natural and artificial OPs is presented (including glyphosate). Based on the available literature, a number of knowledge gaps have been identified that need to be filled in order to understand the environmental effects of these abundant compounds. Special attention has been given to GHG-related processes, with a particular focus on CH4. This stems from the recent discovery of OP-dependent CH4 production in aqueous environments under aerobic conditions. The process has changed the perception of the biogeochemical cycle of CH4, since it was previously thought that biological methane formation was only possible under anaerobic conditions. However, there is a lack of knowledge on whether OP-associated methane is also formed in soils. Moreover, it remains unclear whether anthropogenic OPs affect the CH4 cycle, a concern of significant importance in the context of the increasing rate of global warming. The literature examined in this review also calls for additional research into the date of OPs in waste and sewage and in their impact on environmental microbiomes.

Ecological risk assessment of the typical anti-epidemic drugs in the Pearl River Delta by tracing their source and residual characteristics

Since the outbreak of the COVID-19 pandemic, the anti-epidemic drugs have been used in extraordinary quantities with high intensity, and concerns have grown about their potential ecological risks due to their continued release and persistence in the receiving environments. A systematic investigation, covering the samples from hospital wastewater, effluent from wastewater treatment plants and receiving water bodies in the Pearl River Delta Region (PRDR), was carried out and aimed at tracing the sources and fate of 30 typical anti-epidemic in different water matrixes and evaluating their ecological risk. The results showed that these typical anti-epidemic drugs residues were detected in most of the sampling sites, with the highest concentration measured in hospital wastewater, whose concentrations were as high as ppb level, while the highest concentration of the surface water samples in tributaries was lower than ppb level. Anti-epidemic drugs contained in hospital wastewater and effluent from WWTPs were the main sources of drug residues in the surface water of this region. In the surface water of PRDR, although the detected concentration anti-epidemic drugs were basically in the range of 0-10 ng/L. The risk quotient of several anti-epidemic drugs, including Ciprofloxacin (CFX), Ofloxacin (OFX), Erythromycin (ETM), Clindamycin (CLI), and Sulfamethoxazole (SMX), was calculated to be a high value, which indicated that they might cause non-negligible ecological risk to the aquatic environment.

Neurotoxic effects of chloroquine and its main transformation product formed after chlorination

Pharmaceutical transformation products (TPs) generated during wastewater treatment have become an environmental concern. However, there is limited understanding regarding the TPs produced from pharmaceuticals during wastewater treatment. In this study, chloroquine (CQ), which was extensively used for treating coronavirus disease-19 (COVID-19) infections during the pandemic, was selected for research. We identified and fractionated the main TP produced from CQ during chlorine disinfection and investigated the neurotoxic effects of CQ and its main TP on zebrafish (Danio rerio) embryos. Halogenated TP353 was observed as one of the main TPs produced from CQ during chlorine disinfection. Zebrafish embryos test revealed that TP353 caused higher neurotoxicity in zebrafish larvae, as compared to the CQ, and that was accompanied by significantly decreased expression levels of the genes related to central nervous system development (e.g., gfap, syn2a, and elavl3), inhibited activity of acetylcholinesterase (AChE), reduced GFP fluorescence intensity of motor neuron axons in transgenic larvae (hb9-GFP), and reduced total swimming distance and swimming velocity of larvae during light-dark transition stimulation. The results of this study can potentially be utilized as a theoretical reference for future evaluations of environmental risks associated with CQ and its related TPs. This work presents a methodology for assessing the environmental hazards linked to the discharge of pharmaceutical TPs after wastewater treatment.

Tracing COVID-19 drugs in the environment: Are we focusing on the right environmental compartment?

The Coronavirus Disease 2019 (COVID-19) pandemic led to over 770 million confirmed cases, straining public healthcare systems and necessitating extensive and prolonged use of synthetic chemical drugs around the globe for medical treatment and symptom relief. Concerns have arisen regarding the massive release of active pharmaceutical ingredients (APIs) and their metabolites into the environment, particularly through domestic sewage. While discussions surrounding this issue have primarily centered on their discharge into aquatic environments, particularly through treated effluent from municipal wastewater treatment plants (WWTPs), one often overlooked aspect is the terrestrial environment as a significant receptor of pharmaceutical-laden waste. This occurs through the disposal of sewage sludge, for instance, by applying biosolids to land or non-compliant disposal of sewage sludge, in addition to the routine disposal of expired and unused medications in municipal solid wastes. In this article, we surveyed sixteen approved pharmaceuticals for treating COVID-19 and bacterial co-infections, along with their primary metabolites. For this, we delved into their physiochemical properties, ecological toxicities, environmental persistence, and fate within municipal WWTPs. Emphasis was given on lipophilic substances with log Kow >3.0, which are more likely to be found in sewage sludge at significant factions (25.2%-75.0%) of their inputs in raw sewage and subsequently enter the terrestrial environment through land application of biosolids, e.g., 43% in the United States and as high as 96% in Ireland or non-compliant practices of sewage sludge disposal in developing communities, such as open dumping and land application without prior anaerobic digestion. The available evidence underscores the importance of adequately treating and disposing of sewage sludge before its final disposal or land application in an epidemic or pandemic scenario, as mismanaged sewage sludge could be a significant vector for releasing pharmaceutical compounds and their metabolites into the terrestrial environment.

Electrochemical degradation of favipiravir (anti-viral) drug from aqueous solution: optimization of operating parameters using the response surface method

The aim of the current study is to investigate the efficacy of the electro-Fenton process in the degradation of favipiravir drugs from aqueous solutions, which has increased in use as a result of the COVID-19 pandemic. The Response Surface Methodology (RSM) was developed using a Central Composite Design (CCD) in which five independent variables, including Fe2+ concentration, current density, initial FVP concentration, pH, and reaction time, were coded with high and low levels, and the maximum removal percentage of FVP (97.8%) and COD (91.65%) were determined as responses. In the EF process, 530 mg/L H2O2 was produced in-situ by cathodic reduction of O2 in aqueous solution and thus FVP has been successfully oxidized through hydroxyl radicals. The H2O2/Fe2+ ratio was determined to be 0.51 under optimum conditions. At the end of the experiment, the maximum energy consumption was found to be 2.12 kWh per g COD. The FVP was completely mineralized in a very short time by the EF process, according to the LC-MS/MS examination. The EF process followed the pseudo first-order kinetic model with the rate constants of 0.023, 0.016 and 0.006 1/min for pH 2, 3 and 4, respectively. According to the findings of this study, the electro-Fenton process is an effective method for removing FVP from aqueous solutions. To the authors' knowledge, this is the first study to show the degradation and optimum conditions of FVP in aqueous solution using the electro-Fenton (EF) process.

Insights in Pharmaceutical Pollution: The Prospective Role of eDNA Metabarcoding

Environmental pollution is a growing threat to natural ecosystems and one of the world's most pressing concerns. The increasing worldwide use of pharmaceuticals has elevated their status as significant emerging contaminants. Pharmaceuticals enter aquatic environments through multiple pathways related to anthropogenic activity. Their high consumption, insufficient waste treatment, and the incapacity of organisms to completely metabolize them contribute to their accumulation in aquatic environments, posing a threat to all life forms. Various analytical methods have been used to quantify pharmaceuticals. Biotechnology advancements based on next-generation sequencing (NGS) techniques, like eDNA metabarcoding, have enabled the development of new methods for assessing and monitoring the ecotoxicological effects of pharmaceuticals. eDNA metabarcoding is a valuable biomonitoring tool for pharmaceutical pollution because it (a) provides an efficient method to assess and predict pollution status, (b) identifies pollution sources, (c) tracks changes in pharmaceutical pollution levels over time, (d) assesses the ecological impact of pharmaceutical pollution, (e) helps prioritize cleanup and mitigation efforts, and (f) offers insights into the diversity and composition of microbial and other bioindicator communities. This review highlights the issue of aquatic pharmaceutical pollution while emphasizing the importance of using modern NGS-based biomonitoring actions to assess its environmental effects more consistently and effectively.

Determination of anti-SARS-CoV-2 virustatic pharmaceuticals in the aquatic environment using high-performance liquid chromatography high-resolution mass spectrometry

The Covid-19 pandemic has affected the global population since 2019. The rapid development and approval of vaccines has brought relief. Yet, effective cures are still being researched. Even if the pandemic situation may end, SARS-CoV-2 will remain and, thus, continued application of the drugs will lead to emissions of the active ingredients into the aquatic environment, as with other anthropogenic micropollutants. However, a general method for trace analysis of antiviral drugs is still missing. To this purpose, favipiravir, remdesivir, its active metabolite GS-441524, molnupiravir and its active metabolite EIDD-1931 were selected as representative analytes. A method was developed based on solid phase extraction and high-performance liquid chromatography combined with electrospray ionization quadrupole time-of-flight high-resolution mass spectrometry. Optimization comprised the choice of chromatographic columns, elution gradient, mass spectrometry and tandem mass spectrometry parameters. Solid phase extraction proved suitable for increase in limits of detection and quantitation. amelioration of the limits of detection and quantitation. Matrix effects were investigated applying the optimized method to a wastewater sample with added virustatics. All five compounds could be separated with reversed phase chromatography, whereas EIDD-1931 profited from hydrophilic interaction liquid chromatography. The optimized method yielded limits of detection and quantification of 2.1·10-1, 6.9·10-1 µg·L-1 for favipiravir, 1.8·10-3, 5.5·10-3 µg·L-1 for remdesivir, 1.9·10-3, 7.6·10-3 µg·L-1 for GS-441524, 2.9·10-3, 8.7·10-3 µg·L-1 for molnupiravir, and 1.3·10-1, 3.8·10-1 µg·L-1 for EIDD 1931. The method was first applied to compound stability testing at pH 2.8 and 9.7. At pH 2.8, remdesivir, GS-441524 and molnupiravir proved stable, whereas about 14% of EIDD-1931 and favipiravir were degraded. All five antiviral compounds were almost completely decomposed at pH 9.7. The application of the method was further demonstrated for potential transformation product detection on favipiravir ozonation monitoring.

Bacteria exposed to antiviral drugs develop antibiotic cross-resistance and unique resistance profiles

Antiviral drugs are used globally as treatment and prophylaxis for long-term and acute viral infections. Even though antivirals also have been shown to have off-target effects on bacterial growth, the potential contributions of antivirals to antimicrobial resistance remains unknown. Herein we explored the ability of different classes of antiviral drugs to induce antimicrobial resistance. Our results establish the previously unrecognized capacity of antivirals to broadly alter the phenotypic antimicrobial resistance profiles of both gram-negative and gram-positive bacteria Escherichia coli and Bacillus cereus. Bacteria exposed to antivirals including zidovudine, dolutegravir and raltegravir developed cross-resistance to commonly used antibiotics including trimethoprim, tetracycline, clarithromycin, erythromycin, and amoxicillin. Whole genome sequencing of antiviral-resistant E. coli isolates revealed numerous unique single base pair mutations, as well as multi-base pair insertions and deletions, in genes with known and suspected roles in antimicrobial resistance including those coding for multidrug efflux pumps, carbohydrate transport, and cellular metabolism. The observed phenotypic changes coupled with genotypic results indicate that bacteria exposed to antiviral drugs with antibacterial properties in vitro can develop multiple resistance mutations that confer cross-resistance to antibiotics. Our findings underscore the potential contribution of wide scale usage of antiviral drugs to the development and spread of antimicrobial resistance in humans and the environment.

Recent Developments in Semiconductor-Based Photocatalytic Degradation of Antiviral Drug Pollutants

The prevalence of antiviral drugs (ATVs) has seen a substantial increase in response to the COVID-19 pandemic, leading to heightened concentrations of these pharmaceuticals in wastewater systems. The hydrophilic nature of ATVs has been identified as a significant factor contributing to the low degradation efficiency observed in wastewater treatment plants. This characteristic often necessitates the implementation of additional treatment steps to achieve the complete degradation of ATVs. Semiconductor-based photocatalysis has garnered considerable attention due to its promising potential in achieving efficient degradation rates and subsequent mineralization of pollutants, leveraging the inexhaustible energy of sunlight. However, in recent years, there have been few comprehensive reports that have thoroughly summarized and analyzed the application of photocatalysis for the removal of ATVs. This review commences by summarizing the types and occurrence of ATVs. Furthermore, it places a significant emphasis on delivering a comprehensive summary and analysis of the characteristics pertaining to the photocatalytic elimination of ATVs, utilizing semiconductor photocatalysts such as metal oxides, doped metal oxides, and heterojunctions. Ultimately, the review sheds light on the identified research gaps and key concerns, offering invaluable insights to steer future investigations in this field.

The Influences of Pore Blockage by Natural Organic Matter and Pore Dimension Tuning on Pharmaceutical Adsorption onto GO-Fe3O4

The ubiquitous presence of pharmaceutical pollution in the environment and its adverse impacts on public health and aquatic ecosystems have recently attracted increasing attention. Graphene oxide coated with magnetite (GO-Fe₃O₄) is effective at removing pharmaceuticals in water by adsorption. However, the myriad compositions in real water are known to adversely impact the adsorption performance. One objective of this study was to investigate the influence of pore blockage by natural organic matter (NOM) with different sizes on pharmaceutical adsorption onto GO-Fe₃O₄. Meanwhile, the feasibility of pore dimension tuning of GO-Fe₃O₄ for selective adsorption of pharmaceuticals with different structural characteristics was explored. It was shown in the batch experiments that the adsorbed pharmaceutical concentrations onto GO-Fe₃O₄ were significantly affected (dropped by 2-86%) by NOM that had size ranges similar to the pore dimensions of GO-Fe₃O₄, as the impact was enhanced when the adsorption occurred at acidic pHs (e.g., pH 3). Specific surface areas, zeta potentials, pore volumes, and pore-size distributions of GO-Fe₃O₄ were influenced by the Fe content forming different-sized Fe₃O₄ between GO layers. Low Fe contents in GO-Fe₃O₄ increased the formation of nano-sized pores (2.0-12.5 nm) that were efficient in the adsorption of pharmaceuticals with low molecular weights (e.g., 129 kDa) or planar structures via size discrimination or inter-planar π-π interaction, respectively. As excess larger-sized pores (e.g., >50 nm) were formed on the surface of GO-Fe₃O₄ due to higher Fe contents, pharmaceuticals with larger molecular weights (e.g., 296 kDa) or those removed by electrostatic attraction between the adsorbate and adsorbent dominated on the GO-Fe₃O₄ surface. Given these observations, the surface characteristics of GO-Fe₃O₄ were alterable to selectively remove different pharmaceuticals in water by adsorption, and the critical factors determining the adsorption performance were discussed. These findings provide useful views on the feasibility of treating pharmaceutical wastewater, recycling valuable pharmaceuticals, or removing those with risks to public health and ecosystems.

MXenes and MXene-based materials for removal of pharmaceutical compounds from wastewater: Critical review

The rapid increase in the global population and its ever-rising standards of living are imposing a huge burden on global resources. Apart from the rising energy needs, the demand for freshwater is correspondingly increasing. A population of around 3.8 billion people will face water scarcity by 2030, as per the reports of the World Water Council. This may be due to global climate change and the deficiency in the treatment of wastewater. Conventional wastewater treatment technologies fail to completely remove several emerging contaminants, especially those containing pharmaceutical compounds. Hence, leading to an increase in the concentration of harmful chemicals in the human food chain and the proliferation of several diseases. MXenes are transition metal carbide/nitride ceramics that primarily structure the leading 2D material group. MXenes act as novel nanomaterials for wastewater treatment due to their high surface area, excellent adsorption properties, and unique physicochemical properties, such as high electrical conductivity and hydrophilicity. MXenes are highly hydrophilic and covered with active functional groups (i.e., hydroxyl, oxygen, fluorine, etc.), which makes them efficient adsorbents for a wide range of species and promising candidates for environmental remediation and water treatment. This work concludes that the scaling up process of MXene-based materials for water treatment is currently of high cost. The up-to-date applications are still limited because MXenes are currently produced mainly in the laboratory with limited yield. It is recommended to direct research efforts towards lower synthesis cost procedures coupled with the use of more environmentally friendly materials to avoid secondary contamination.

The pit latrine paradox in low-income settings: A sanitation technology of choice or a pollution hotspot?

Pit latrines are widely promoted to improve sanitation in low-income settings, but their pollution and health risks receive cursory attention. The present narrative review presents the pit latrine paradox; (1) the pit latrine is considered a sanitation technology of choice to safeguard human health, and (2) conversely, pit latrines are pollution and health risk hotspots. Evidence shows that the pit latrine is a 'catch-all' receptacle for household disposal of hazardous waste, including; (1) medical wastes (COVID-19 PPE, pharmaceuticals, placenta, used condoms), (2) pesticides and pesticide containers, (3) menstrual hygiene wastes (e.g., sanitary pads), and (4) electronic wastes (batteries). Pit latrines serve as hotspot reservoirs that receive, harbour, and then transmit the following into the environment; (1) conventional contaminants (nitrates, phosphates, pesticides), (2) emerging contaminants (pharmaceuticals and personal care products, antibiotic resistance), and (3) indicator organisms, and human bacterial and viral pathogens, and disease vectors (rodents, houseflies, bats). As greenhouse gas emission hotspots, pit latrines contribute 3.3 to 9.4 Tg/year of methane, but this could be an under-estimation. Contaminants in pit latrines may migrate into surface water, and groundwater systems serving as drinking water sources and pose human health risks. In turn, this culminates into the pit latrine-groundwater-human continuum or connectivity, mediated via water and contaminant migration. Human health risks of pit latrines, a critique of current evidence, and current and emerging mitigation measures are presented, including isolation distance, hydraulic liners/ barriers, ecological sanitation, and the concept of a circular bioeconomy. Finally, future research directions on the epidemiology and fate of contaminants in pit latrines are presented. The pit latrine paradox is not meant to downplay pit latrines' role or promote open defaecation. Rather, it seeks to stimulate discussion and research to refine the technology to enhance its functionality while mitigating pollution and health risks.

Developments and application of chitosan-based adsorbents for wastewater treatments

Water quality is deteriorating continuously as increasing levels of toxic inorganic and organic contaminants mostly discharging into the aquatic environment. Removal of such pollutants from the water system is an emerging research area. During the past few years use of biodegradable and biocompatible natural additives has attracted considerable attention to alleviate pollutants from wastewater. The chitosan and its composites emerged as a promising adsorbents due to their low price, abundance, amino, and hydroxyl groups, as well as their potential to remove various toxins from wastewater. However, a few challenges associated with its practical use include lack of selectivity, low mechanical strength, and solubility in acidic medium. Therefore, several approaches for modification have been explored to improve the physicochemical properties of chitosan for wastewater treatment. Chitosan nanocomposites found effective for the removal of metals, pharmaceuticals, pesticides, microplastics from the wastewaters. Nanoparticle doped with chitosan in the form of nano-biocomposites has recently gained much attention and proven a successful tool for water purification. Hence, applying chitosan-based adsorbents with numerous modifications is a cutting-edge approach to eliminating toxic pollutants from aquatic systems with the global aim of making potable water available worldwide. This review presents an overview of distinct materials and methods for developing novel chitosan-based nanocomposites for wastewater treatment.

Antiviral drugs in wastewater are on the rise as emerging contaminants: A comprehensive review of spatiotemporal characteristics, removal technologies and environmental risks

Antiviral drugs (ATVs) are widely used to treat illnesses caused by viruses. Particularly, ATVs were consumed in such large quantities during the pandemic that high concentrations were detected in wastewater and aquatic environment. Since ATVs are not fully absorbed by the human or animal body, this results in large amounts of them being discharged into the sewage through urine or feces. Most ATVs can be degraded by microbes at wastewater treatment plants (WWTPs), while some ATVs either require deep treatment to reduce concentration and toxicity. Parent and metabolites residing in effluent posed a varying degree of risk when entering the aquatic environment, while increasing the potential of natural reservoirs for environmentally acquired antiviral drug resistance potential. There is a rising research on the behavior of ATVs in the environment has surged since the pandemic. In the context of multiple viral diseases worldwide, especially during the current COVID-19 pandemic, a comprehensive assessment of the occurrence, removal, and risk of ATVs is urgently needed. This review aims to discuss the fate of ATVs in WWTPs from various regions in the world with wastewater as the main analyzing object. The ultimate goal is to focus on ATVs with high ecological impact and regulate their use or develop advanced treatment technologies to mitigate the risk to the environment.

Dose-response and type-dependent effects of antiviral drugs in anaerobic digestion of waste-activated sludge for biogas production

In the context of the COVID-19 pandemic, antiviral drugs (AVDs) were heavily excreted into wastewater and subsequently enriched in sewage sludge due to their widespread use. The potential ecological risks of AVDs have attracted increasing attention, but information on the effects of AVDs on sludge anaerobic digestion (AD) is limited. In this study, two typical AVDs (lamivudine and ritonavir) were selected to investigate the responses of AD to AVDs by biochemical methane potential tests. The results indicated that the effects of AVDs on methane production from sludge AD were dose- and type-dependent. The increased ritonavir concentration (0.05-50 mg/kg TS) contributed to an 11.27-49.43% increase in methane production compared with the control. However, methane production was significantly decreased at high lamivudine doses (50 mg/kg TS). Correspondingly, bacteria related to acidification were affected when exposed to lamivudine and ritonavir. Acetoclastic and hydrotropic methanogens were inhibited at a high lamivudine dose, while ritonavir enriched methylotrophic and hydrotropic methanogens. Based on the analysis of intermediate metabolites, the inhibition of lamivudine and the promotion of ritonavir on acidification and methanation were confirmed. In addition, the existence of AVDs could affect sludge properties. Sludge solubilization was inhibited when exposed to lamivudine and enhanced by ritonavir, perhaps caused by their different structures and physicochemical properties. Moreover, lamivudine and ritonavir could be partially degraded by AD, but 50.2-68.8% of AVDs remained in digested sludge, implying environmental risks.

Toxicity Evaluation and Effect-Based Identification of Chlorine Disinfection Products of the Anti-COVID-19 Drug Chloroquine Phosphate

Antiviral transformation products (TPs) generated during wastewater treatment are an environmental concern, as their discharge, in considerable amounts, into natural waters during a pandemic can pose possible risks to the aquatic environment. Identification of the hazardous TPs generated from antivirals during wastewater treatment is important. Herein, chloroquine phosphate (CQP), which was widely used during the coronavirus disease-19 (COVID-19) pandemic, was selected for research. We investigated the TPs generated from CQP during water chlorination. Zebrafish (Danio rerio) embryos were used to assess the developmental toxicity of CQP after water chlorination, and hazardous TPs were estimated using effect-directed analysis (EDA). Principal component analysis revealed that the developmental toxicity induced by chlorinated samples could be relevant to the formation of some halogenated TPs. Fractionation of the hazardous chlorinated sample, along with the bioassay and chemical analysis, identified halogenated TP387 as the main hazardous TP contributing to the developmental toxicity induced by chlorinated samples. TP387 could also be formed in real wastewater during chlorination in environmentally relevant conditions. This study provides a scientific basis for the further assessment of environmental risks of CQP after water chlorination and describes a method for identifying unknown hazardous TPs generated from pharmaceuticals during wastewater treatment.

Comprehensive micropollutant characterization of wastewater during Covid-19 crisis in 2020: Suspect screening and environmental risk prioritization strategy

Micropollutants monitoring in wastewater can serve as a picture of what is consuming society and how it can impact the aquatic environment. In this work, a suspect screening approach was used to detect the known and unknown contaminants in wastewater samples collected from two wastewater treatment plants (WWTPs) located in the Basque Country (Crispijana in Alava, and Galindo in Vizcaya) during two weekly sampling campaigns, which included the months from April to July 2020, part of the confinement period caused by COVID-19. To that aim, high-resolution mass spectrometry was used to collect full-scan data-dependent tandem mass spectra from the water samples using a suspect database containing >40,000 chemical substances. The presence of > 80 contaminants was confirmed (level 1) and quantified in both WWTP samples, while at least 47 compounds were tentatively identified (2a). Among the contaminants of concern, an increase in the occurrence of some compounds used for COVID-19 disease treatment, such as lopinavir and hydroxychloroquine, was observed during the lockdown. A prioritization strategy for environmental risk assessment was carried out considering only the compounds quantified in the effluents of Crispijana and Galindo WWTPs. The compounds were scored based on the removal efficiency, estimated persistency, bioconcentration factor, mobility, toxicity potential and frequency of detection in the samples. With this approach, 33 compounds (e.g. amantadine, clozapine or lopinavir) were found to be considered key contaminants in the analyzed samples based on their concentration, occurrence and potential toxicity. Additionally, antimicrobial (RQ-AR) and antiviral (EDRP) risk of certain compounds was evaluated, where ciprofloxacin and fluconazole represented medium risk for antibiotic resistance (1 > RQ-AR > 0.1) in the aquatic ecosystems. Regarding mixture toxicity, the computed sum of toxic unit values of the different effluents (> 1) suggest that interactions between the compounds need to be considered for future environmental risk assessments.

Synthesis and comparison of three photocatalysts for degrading tramadol as an analgesic and widely used drug in water samples

Tramadol is an analgesic drug that is mainly excreted in the urine. The entry of Tramadol into water samples causes their biological contamination. Therefore, three catalysts such as bismuth ferrite, cobalt-doped bismuth ferrite, and a magnetized Keggin type of polyoxometalate (α-Fe₂O₃@phosphotungstic acid), were synthesized as photocatalysts to degrade Tramadol in water samples. The morphology and properties of the prepared photocatalysts were evaluated using several techniques. Effects of several factors, including tramadol concentration, pH, hydrogen peroxide concentration, and photocatalyst amount, were studied and optimized by a design experiment procedure based on Box-Behnken design for reducing the number of experiments and cost and investigating the interactions between factors in the photocatalytic degradation process of Tramadol. These factors were optimized for each prepared photocatalyst individually. Under the optimum conditions, the percentages of tramadol degradation and kinetics of the degradation process were evaluated in the presence of each photocatalyst. The tramadol degradation percentages using bismuth ferrite, cobalt-doped bismuth ferrite, and α-Fe₂O₃ @phosphotungstic acid were 81.10% for 120 min, 90.63% for 80 min, and 91.32% for 80 min, respectively. The rate constants of tramadol degradation were 0.0145, 0.0329, and 0.0312 min^-1 for bismuth ferrite, cobalt-doped bismuth ferrite, and α-Fe₂O₃ @phosphotungstic acid, respectively. The results indicated the highest percentage of tramadol degradation and rate of the degradation process were obtained using α-Fe₂O₃ @phosphotungstic acid and cobalt-doped bismuth ferrite, respectively.

Stability and WBE biomarkers possibility of 17 antiviral drugs in sewage and gravity sewers

Wastewater-based epidemiology (WBE) is a promising technique for monitoring the rapidly increasing use of antiviral drugs during the COVID-19 pandemic. It is essential to evaluate the in-sewer stability of antiviral drugs in order to determine appropriate biomarkers. This study developed an analytical method for quantification of 17 typical antiviral drugs, and investigated the stability of target compounds in sewer through 4 laboratory-scale gravity sewer reactors. Nine antiviral drugs (lamivudine, acyclovir, amantadine, favipiravir, nevirapine, oseltamivir, ganciclovir, emtricitabine and telbivudine) were observed to be stable and recommended as appropriate biomarkers for WBE. As for the other 8 unstable drugs (abacavir, arbidol, ribavirin, zidovudine, ritonavir, lopinavir, remdesivir and efavirenz), their attenuation was driven by adsorption, biodegradation and diffusion. Moreover, reaction kinetics revealed that the effects of sediments and biofilms were regarded to be independent in gravity sewers, and the rate constants of removal by biofilms was directly proportional to the ratio of surface area against wastewater volume. The study highlighted the potential importance of flow velocity for compound stability, since an increased flow velocity significantly accelerated the removal of unstable biomarkers. In addition, a framework for graded evaluation of biomarker stability was proposed to provide reference for researchers to select suitable WBE biomarkers. Compared with current classification method, this framework considered the influences of residence time and different removal mechanisms, which additionally screened four antiviral drugs as viable WBE biomarkers. This is the first study to report the stability of antiviral drugs in gravity sewers.

COVID-19 related antiviral drugs are less adsorbable on sediment under alkaline and high cation conditions

The COVID-19 pandemic resulted in unprecedented usage and elevated environmental concentrations of antiviral drugs. However, very limited studies have reported their sorption characteristics on environmental matrices. This study investigated the sorption of six COVID-19 related antivirals on Taihu Lake sediment with varied aqueous chemistry. Results showed that the sorption isotherms for arbidol (ABD), oseltamivir (OTV), and ritonavir (RTV) were linear, while the Freundlich model was the best-fit for ribavirin (RBV) and the Langmuir model for favipiravir (FPV) and remdesivir (RDV). Their distribution coefficient, K_d, varied between 5.051 L/kg to 248.6 L/kg with the sorption capacities ranked as FPV > RDV > ABD > RTV > OTV > RBV. Alkaline conditions (pH 9) and elevated cation strength (0.05 M to 0.1 M) decreased the sorption capacities of the sediment for these drugs. Thermodynamic analysis revealed that the spontaneous sorption of RDV, ABD, and RTV was between physisorption and chemisorption while FPV, RBV, and OTV were mainly physisorption. Functional groups related to hydrogen bonds, π - π interaction, and surface complexation were implicated in the sorption processes. These findings enhance our understanding about the environmental fate of COVID-19 related antivirals and provide basic data for predicting their distribution and risk in the environment.

Evaluation of acyclovir adsorption on granular activated carbon from aqueous solutions: batch and fixed-bed parametric studies

The present study is aimed to assess the adsorptive potential of carbonaceous material for the acyclovir (ACVR) removal from the aquatic environment using batch and fixed-bed processes. In batch mode, the impact of various process conditions (contact time, pH, adsorbent dose, initial ACVR concentration, and temperature) on ACVR adsorption was investigated. Experimental results revealed that Langmuir isotherm and the pseudo-second-order kinetic model adequately represent the ACVR adsorption mechanism, indicating homogeneous adsorption. The process was found exothermic and spontaneous. Thermodynamic studies concluded that adsorption is a result of both physisorption and chemisorption. To understand the dynamic regime for the design of large-scale column studies, experimental data obtained from breakthrough curve were fitted to various analytical kinetic models. Yan model followed by Thomas model demonstrated a greater correlation of breakthrough data, confirming that the results are significant and are in line with Langmuir isotherm and pseudo-second-order kinetic. G-AC exhibits sufficient adsorption capacity for ACVR. Hence, it is concluded that it can be used in a fixed-bed column in continuous mode for the treatment of ACVR-contaminated wastewater.

Graphical abstract

Supplementary Information

The online version contains supplementary material available at 10.1007/s11696-023-02810-7.

Smart Organic-Inorganic Polyoxomolybdates in Forward Osmosis for Antiviral-Drug Wastewater Treatment and Drug Reclamation

The demand to effectively treat medical wastewater has escalated with the much greater use of antiviral drugs since the COVID-19 pandemic. Forward osmosis (FO) has great potential in wastewater treatment only when appropriate draw solutes are available. Here, we synthesize a series of smart organic-inorganic polyoxomolybdates (POMs), namely, (NH₄)₆[Mo₇O₂₄], (PrNH₃)₆[Mo₇O₂₄], (ⁱPrNH₃)₆[Mo₇O₂₄], and (BuNH₃)₆[Mo₇O₂₄], for FO to treat antiviral-drug wastewater. Influential factors of separation performance have been systematically studied by tailoring the structure, organic characteristics, and cation chain length of POMs. POMs at 0.4 M produce water fluxes ranging from 14.0 to 16.4 LMH with negligible solute losses, at least 116% higher than those of NaCl, NH₄HCO₃, and other draw solutes. (NH₄)₆[Mo₇O₂₄] creates a water flux of 11.2 LMH, increased by more than 200% compared to that of NaCl and NH₄HCO₃ in long-term antiviral-drug wastewater reclamation. Remarkably, the drugs treated with NH₄HCO₃ and NaCl are either contaminated or denatured, while those with (NH₄)₆[Mo₇O₂₄] remain intact. Moreover, these POMs are recovered by sunlight-assisted acidification owing to their light and pH dual sensitivity and reusability for FO. POMs prove their suitability as draw solutes and demonstrate their superiority over the commonly studied draw solutes in wastewater treatment.

Unravelling joint cytotoxicity of ibuprofen and oxytetracycline on Chlamydomonas reinhardtii using a programmed cell death-related biomarkers panel

Pharmaceutical active compounds (PhACs) are emerging contaminants that pose a growing concern due to their ubiquitous presence and harmful impact on aquatic ecosystems. Among PhACs, the anti-inflammatory ibuprofen (IBU) and the antibiotic oxytetracycline (OTC) are two of the most used compounds whose presence has been reported in different aquatic environments worldwide. However, there is still scarce information about the cellular and molecular alterations provoked by IBU and OTC on aquatic photosynthetic microorganisms as microalgae, even more if we refer to their potential combined toxicity. To test the cyto- and genotoxicity provoked by IBU, OTC and their binary combination on Chlamydomonas reinhardtii, a flow cytometric panel was performed after 24 h of single and co-exposure to both contaminants. Assayed parameters were cell vitality, metabolic activity, intracellular ROS levels, and other programmed cell death (PCD)-related biomarkers as cytoplasmic and mitochondrial membrane potentials and caspase-like and endonuclease activities. In addition, a nuclear DNA fragmentation analysis by comet assay was carried out. For most of the parameters analysed (vitality, metabolic activity, cytoplasmic and mitochondrial membrane potentials, and DNA fragmentation) the most severe damages were observed in the cultures exposed to the binary mixture (IBU+OTC), showing a joint cyto- and genotoxicity effect. Both PhACs and their mixture caused a remarkable decrease in cell proliferation and metabolic activity and markedly increased intracellular ROS levels, parallel to a noticeable depolarization of cytoplasmic and mitochondrial membranes. Moreover, a strong increase in both caspase and endonuclease activities as well as a PCD-related loss of nuclear DNA integrity was observed in all treatments. Results analysis showed that the PhACs caused cell death on this non-target organism, involving mitochondrial membrane depolarization, enhanced ROS production and activation of PCD process. Thus, PCD should be an applicable toxicological target for unraveling the harmful effects of co-exposure to PhACs in aquatic organisms as microalgae.

Predicted Environmental Risk Assessment of Antimicrobials with Increased Consumption in Portugal during the COVID-19 Pandemic; The Groundwork for the Forthcoming Water Quality Survey

The environmental release of antimicrobial pharmaceuticals is an imminent threat due to ecological impacts and microbial resistance phenomena. The recent COVID-19 outbreak will likely lead to greater loads of antimicrobials in the environment. Thus, identifying the most used antimicrobials likely to pose environmental risks would be valuable. For that, the ambulatory and hospital consumption patterns of antimicrobials in Portugal during the COVID-19 pandemic (2020–2021) were compared with those of 2019. A predicted risk assessment screening approach based on exposure and hazard in the surface water was conducted, combining consumption, excretion rates, and ecotoxicological/microbiological endpoints in five different regions of Portugal. Among the 22 selected substances, only rifaximin and atovaquone demonstrated predicted potential ecotoxicological risks for aquatic organisms. Flucloxacillin, piperacillin, tazobactam, meropenem, ceftriaxone, fosfomycin, and metronidazole showed the most significant potential for antibiotic resistance in all analysed regions. Regarding the current screening approach and the lack of environmental data, it is advisable to consider rifaximin and atovaquone in subsequent water quality surveys. These results might support the forthcoming monitorisation of surface water quality in a post-pandemic survey.

Radially aligned hierarchical N-doped porous carbon beads derived from oil-sand asphaltene for long-life water filtration and wastewater treatment

The application of waste-derived highly efficient adsorbent for organic pollutants removal from water and wastewater is presented. Highly porous carbon beads with radially aligned macrochannels were prepared from asphaltene. Well-ordered inwardly aligned macrovoids favored solute diffusion and maximized the liquid accommodation capacity. A further N-doping could modulate the sorbent hydrophilicity leading to an outstanding absorption performance for a range of organic solvents and oily chemicals. N-doped carbon beads were effective sorbents of lopinavir (LNV) and ritonavir (RNV) from water and wastewater. The process of sorption was fast, and the highest removal was noted for RNV than LPV. N-doping favored LNV and RNV adsorption due to the increased porous structure of N-doped asphaltene beads. The chemisorption of both LPV and RTV was a rate-limiting step. The presence of co-pollutants in treated wastewater enhanced LPV and RNV removal and an up to 470 % increase was noted. The presence of LPV or RTV in distilled water was not toxic to Aliivibrio fischeri or even can stimulate their growth. However, after the adsorption process, the solution of RTV reduced its toxicity significantly and the final solution was not toxic. The opposite effect was noted for LPV. Given the repeatability, high removal performance, and cost-effectiveness of the asphaltene-based carbon microtubes when compared to other well-known sorbents such as carbon nanotubes, they demonstrated great potential as a low-cost and effective agent for long-life water filtration and wastewater treatment.

Are we ready to combat the ecotoxicity of COVID-19 pharmaceuticals? An in silico aquatic risk assessment

To fight COVID-19 with uncountable medications and bioproducts throughout the world has taken us to another challenge of ecotoxicity. The indiscriminate usage followed by improper disposal of unused antibacterials, antivirals, antimalarials, immunomodulators, angiotensin II receptor blockers, corticosteroids, anthelmintics, anticoagulants etc. can lead us to an unimaginable ecotoxicity in the long run. A series of studies already identified active pharmaceutical ingredients (APIs) of the mentioned therapeutic classes and their metabolites in aquatic bodies as well as in wastewater treatment plants. Therefore, an initial ecotoxicity assessment of the majorly used pharmaceuticals is utmost requirement of the present time. The present in silico risk assessment study is focused on the aquatic toxicity prediction of 81 pharmaceuticals where 77 are most-used pharmaceuticals for COVID-19 throughout the world based on the literature along with one drug nirmatrelvir [PF-07321332] approved for emergency use by US-FDA and three other molecules under clinical trial. The ecotoxicity of the studied compounds were predicted based on the three aquatic species fish, algae and crustaceans employing the highest quality QSAR models available from the literature as well as using ECOSAR and QSAR Toolbox. To compare the toxicity thresholds, we have also used 4 control pharmaceuticals based on the worldwide occurrence from river, lake, STP, WWTPs, influent and effluent followed by high reported aquatic toxicity over the years as per the literature. Based on the statistical comparison, we have proposed top 3 pharmaceuticals used for the COVID-19 most toxic to the aquatic environment. The study will provide confident predictions of aquatic ecotoxicity data related to abundant use of COVID-19 drugs. The major aim of the study is to fill up the aquatic ecotoxicity data gap of major medications used for COVID-19.

Analytical approaches for determination of COVID-19 candidate drugs in human biological matrices

Since the outbreak of the COVID-19 pandemic, the use of antiviral and other available drugs has been considered to combat or reduce the clinical symptoms of patients. In this regard, it would be necessary to choose sensitive and selective analytical techniques for pharmacokinetic and pharmacodynamic studies, monitoring of drug concentration in biological fluids, and determination of the most appropriate dose to achieve the desired effect on the disease. In the present study, the analytical techniques based on spectroscopy and chromatography with different detectors for diagnosis and determination of candidate drugs in the treatment of COVID-19 in human biological fluids are reviewed during the period 2015-2022. Moreover, various sample preparation and extraction techniques, are being used for this purpose, such as protein precipitation (PP), solid-phase extraction (SPE), liquid-liquid extraction (LLE), and QuEChERS (quick, easy, cheap, effective, rugged, and safe) are investigated.

Comparison of ribavirin degradation in the UV/H2O2 and UV/PDS systems: Reaction mechanism, operational parameter and toxicity evaluation

Residues in surface water of ribavirin, which used extensively during the COVID-19 pandemic, have become an emerging issue due to its adverse impact on the environment and human health. UV/H₂O₂ and UV/peroxydisulfate (PDS) have different degradation effects on ribavirin, and the same operational parameter have different effects on the two processes. In this study, the reaction mechanism and degradation efficiency for ribavirin were studied to compare the differences under UV/H₂O₂ and UV/PDS processes. We calculated the total rate constants of ribavirin with HO^• and SO₄ ^•- in the liquid phase as 2.73 × 10⁸ and 9.39 × 10⁵ M^-1s^-1. The density functional theory (DFT) calculation results showed that HO^• and SO₄ ^•- react more readily with ribavirin via H-abstraction (HAA). The nitrogen-containing heterocyclic ring is difficult to undergo ring-opening degradation. The UV/PDS process was more stable and performed better than the UV/H₂O₂ for the ribavirin degradation when the same molar oxidant dosage was applied. HO^• plays an extremely important role in the degradation of ribavirin by UV/PDS. The reason for this phenomenon is the combination of the higher yield of HO^• produced in the UV/PDS process and the faster reaction rate of ribavirin with HO^•. The UV/H₂O₂ process is more sensitive to pH than UV/PDS. Alkaline condition can significantly inhibit the ribavirin degradation. The effects of natural organic matter (NOM) and ribavirin concentration were also compared. Eventually, the toxicity prediction of the product showed that the opening-ring products were more toxic than the parent compound.

Structural growth of zinc oxide nanograins on carbon cloth as flexible electrochemical platform for hydroxychloroquine detection

Pharmaceutical pollution that imposes a health threat worldwide is making accurate and rapid detection crucial to prevent adverse effects. Herein, binder-free zinc oxide nanograins on carbon cloth (ZnO NGs@CC) have been synthesized hydrothermally and employed to fabricate a flexible electrochemical sensor for the quantification of hydroxychloroquine (HCQ) that is typical pharmaceutical pollution. The characteristics of ZnO NGs@CC were investigated by various in-depth electron microscopic, spectroscopic and electroanalytical approaches. Compared with the pristine CC platform, the ZnO NGs@CC platform exhibits superior electrochemical performance in detecting HCQ with a large oxidation current at a low over-potential of +0.92 V with respect to the Ag/AgCl (Sat. KCl) reference electrode. With the support of desirable characteristics, the fabricated ZnO NGs@CC-based electrochemical sensor for HCQ detection displays good performances in terms of wide sensing range (0.5-116 μM), low detection limit (0.09 μM), high sensitivity (0.279 μA μM^-1 cm^-2), and strong selectivity. By the resulting 3D hierarchical nanoarchitecture, ZnO NGs@CC has progressive structural advantages that led to its excellent electrochemical performance in sensing applications. Furthermore, the electrochemical sensor is employed to detect HCQ in biological and environmental samples and also achieves good recovery rates. Thus, the designed ZnO NGs@CC demonstrates admirable electrochemical activity toward HCQ real-time monitoring and would be an excellent electrochemical platform for HCQ sensing.

Quantification of some ARVs' removal efficiency from wastewater using a moving bed biofilm reactor

To date, in South Africa alone, there are an estimated 4.5 million people receiving antiretroviral (ARV) therapy. This places South Africa as the country with the largest ARV therapy programme in the world. As a result, there are an increasing number of reports on the occurrence of ARVs in South African waters. Achieving efficient and bio-friendly methods for the removal of these pollutants is considered as a concern for environmental researchers. This study aims at studying the efficiency of a moving bed biofilm reactor (MBBR) system for removing ARVs from wastewater. A continuous-flow laboratory scale system was designed, built, installed, and operated at a carrier filling rate of 30%, an organic loading rate of 0.6 kg COD/m₃.d_-1 OLR, a hydraulic retention time of 18h, and a 27.8 mL/min flow rate. The systems were monitored over time for the elimination of conventional wastewater parameters i.e., Biological Oxygen Demand, Chemical Oxygen Demand, and nutrients. The results showed that the MBBR system as a bio-friendly method has high efficiency in removing Nevirapine, Tenofovir, Efavirenz, Ritonavir and Emtricitabine from the synthetic influent sample with an average removal of 62%, 74%, 94%, 94% and 95%, respectively, after 10 days of operation.

Human activities induce potential aquatic threats of micropollutants in Danjiangkou Reservoir, the largest artificial freshwater lake in Asia

Freshwater biodiversity and ecosystem services may decline because of toxicant input, and other environmental variables often co-occur with contaminants to jeopardize the freshwater ecosystem. In this study, Danjiangkou Reservoir (DJKR) in central China was selected as the target research area to investigate the impact of multiple categories of micropollutants coupled with other stressors on the reservoir ecosystem. A total of 140 samples were collected from 28 sites in DJKR, and 124 micropollutants, including pesticides, organophosphate esters (OPEs), psychoactive substances, antiviral drugs, and pharmaceutical and personal care products, were quantified. A total of 108 micropollutants were detected in the water samples, with sum concentrations ranging from 82.35 ng·L^-1 to 1436.57 ng·L^-1, and 71 of them had a detection frequency above 50 %, indicating the prevailing micropollutant contamination in the reservoir. The most severe pollution and risks were observed in the tributaries of DJKR. Pesticides (neonicotinoid and triazine) and OPEs were the major contributors to the ecological risk in the reservoir. Insecticides, herbicides, and OPEs accounted for the majority of the risks to fish, algae, and invertebrates, respectively. The determined priority pollutants should be paid increased attention. Environmental variables and human activities, such as human land use, induced the potential aquatic threats of micropollutants in DJKR. Results demonstrated that micropollutant pollution was one of the dominant pressures faced by aquatic organisms and human beings, and human activities played important roles as well.

Evaluation of degradation performance toward antiviral drug ribavirin using advanced oxidation process and its relations to ecotoxicity evolution

The rapid spread of coronavirus disease 2019 has increased the consumption of some antiviral drugs, wherein these are discharged into wastewater, posing risks to the ecosystem and human health. Therefore, efforts are being made for the development of advanced oxidation processes (AOPs) to remediate water containing these pharmaceuticals. Here, the toxicity evolution of the antiviral drug ribavirin (RBV) was systematically investigated during its degradation via the UV/TiO₂/H₂O₂ advanced oxidation process. Under optimal conditions, RBV was almost completely eliminated within 20 min, although the mineralization rate was inadequate. Zebrafish embryo testing revealed that the ecotoxicity of the treated RBV solutions increased at some stages and decreased as the reaction time increased, which may be attributed to the formation and decomposition of various transformation products (TPs). Liquid chromatography-mass spectrometry analysis along with density functional theory calculations helped identify possible toxicity increase-causing TPs, and quantitative structure activity relationship prediction revealed that most TPs exhibit higher toxicity than the parent compound. The findings of this study suggest that, in addition to the removal rate of organics, the potential ecotoxicity of treated effluents should also be considered when AOPs are applied in wastewater treatment.

Development and applications of diffusive gradients in thin films for monitoring pharmaceuticals in surface waters

Pharmaceutical contaminants in surface water have raised significant concerns because of their potential ecological risks. In particular, coronavirus disease 2019 (COVID-19)-related pharmaceuticals can be released to surface water and reduce environmental water quality. Therefore, reliable and robust sampling tools are required for monitoring pharmaceuticals. In this study, passive sampling devices of diffusive gradients in thin films (DGTs) were developed for sampling 35 pharmaceuticals in surface waters. The results demonstrated that hydrophilic-lipophilic balance (HLB) was more suitable for DGT-based devices compared with XAD18 and XDA1 resins. For most pharmaceuticals, the performance of the HLB-DGT devices were independent of pH (5.0-9.0), ionic strength (0.001-0.5 M), and flow velocity (0-400 rpm). The HLB-DGT devices exhibited linear pharmaceutical accumulation for 7 days, and time-weighted average concentrations provided by the HLB-DGT were comparable to those measured by conventional grab sampling. Compared to previous studies, we extended DGT monitoring to include three antiviral drugs used for COVID-19 treatment, which may inspire further exploration on identifying the effects of COVID-19 on ecological and human health.

Efficient removal of anti-HIV drug - maraviroc from natural water by peroxymonosulfate and TiO2 photocatalytic oxidation: Kinetic studies and identification of transformation products

In this study photochemical transformation of the antiretroviral pharmaceutical maraviroc under the simulated UV-Vis radiation was presented. The drug was shown to be extremely photo-resistant, with a half-life over 250 h, which is particularly significant, considering its presence in the aquatic environments. Addition of the natural river water matrix substantially increased the degradation rate, albeit the process led to formation of numerous phototransformation products. Due to high photostability and presumable environmental persistence of maraviroc, a photocatalytic method of its elimination was proposed. Although titanium dioxide alone presented acceptable results, its combination with peroxymonosulfate enormously accelerated the degradation process, increasing it over 67 000 times in comparison with the direct photolysis. Substitution of ultrapure water with river water resulted in inhibition of the PMS-driven processes, however the decomposition efficiency was still very high. Noteworthy, majority of the identified photoproducts were still present after termination of irradiation in all the experiments, which may indicate necessity of ecotoxicological assessment of those compounds.

A sustainable approach for the removal methods and analytical determination methods of antiviral drugs from water/wastewater: A review

In the last years, antiviral drugs especially used for the treatment of COVID-19 have been considered emerging contaminants because of their continuous occurrence and persistence in water/wastewater even at low concentrations. Furthermore, as compared to antiviral drugs, their metabolites and transformation products of these pharmaceuticals are more persistent in the environment. They have been found in environmental matrices all over the world, demonstrating that conventional treatment technologies are unsuccessful for removing them from water/wastewater. Several approaches for degrading/removing antiviral drugs have been studied to avoid this contamination. In this study, the present level of knowledge on the input sources, occurrence, determination methods and, especially, the degradation and removal methods of antiviral drugs are discussed in water/wastewater. Different removal methods, such as conventional treatment methods (i.e. activated sludge), advanced oxidation processes (AOPs), adsorption, membrane processes, and combined processes, were evaluated. In addition, the antiviral drugs and these metabolites, as well as the transformation products created as a result of treatment, were examined. Future perspectives for removing antiviral drugs, their metabolites, and transformation products were also considered.

The efficacy of the VUV/O3 process run in a continuous-flow fluidized bed reactor for simultaneous elimination of favipiravir and bacteria in aqueous matrices

The efficacy of the Vacuum UV/Ozonation (VUV/O₃) process was evaluated for the degradation of favipiravir (FAV). It was found that coupling O₃ and VUV resulted in a considerable synergistic catalytic effect on FAV removal. The VUV/O₃ process performed better in moderately alkaline conditions than in acidic ones; complete FAV degradation and 99.4% TOC removal were achieved within 10 and 60 min, respectively. HO^• played the dominant role in FAV degradation, with a second-order reaction rate constant with HO^• at 1.05 × 10¹⁰ M^-1 s^-1. The VUV/O₃ process could effectively treat tap water spiked with FAV. Efficient FAV and TOC removal, as well as total bacterial inactivation, was attained when treating municipal secondary effluent by the VUV/O₃ process. Finally, the VUV/O₃ process was operated in a continuous-flow mode in a fluidized-bed (FBR) reactor for treating FAV-spiked tap water. Complete degradation and 75.1% mineralization of 10 mg/L FAV were obtained at a hydraulic retention time of 1 and 8 min, respectively. The findings clearly suggest that the VUV/O₃ process operated in a continuous-flow FBR is a promising, efficient technology for the removal of novel and emerging contaminants, such as the antiviral FAV.

Highly efficient decontamination of tetracycline and pathogen by a natural product-derived Emodin/HAp photocatalyst

To address the water pollution induced by pharmaceuticals, especially antibiotics, and pathogens, natural product emodin, a traditional Chinese medicine with the characteristic large π-conjugation anthraquinone structure, was used to rationally develop a novel Emodin/HAp photocatalyst by integrating with a thermally stable and recyclable support material hydroxyapatite (HAp) through a simple preparation method. It was found that its photocatalytic activity to generate reactive oxygen species (ROS) was greatly improved due to the migration of photogenerated electrons and holes between emodin and HAp upon visible light irradiation. Thus, this Emodin/HAp photocatalyst not only quickly photodegraded tetracycline with 99.0% removal efficiency but also exhibited complete photodisinfection of pathogenic bacteria Staphylococcus aureus upon visible light irradiation. Therefore, this study offers a new route for the design and preparation of multifunctional photocatalysts using widely available natural products for environmental remediation.

Decentralized systems for the treatment of antimicrobial compounds released from hospital aquatic wastes

In many developing countries, untreated hospital effluents are discharged and treated simultaneously with municipal wastewater. However, if the hospital effluents are not treated separately, they pose concerning health risks due to the possible transport of the antimicrobial genes and microbes in the environment. Such effluent is considered as a point source for a number of potentially infectious microorganisms, waste antimicrobial compounds and other contaminants that could promote antimicrobial resistance development. The removal of these contaminants prior to discharge reduces the exposure of antimicrobials to the environment and this should lower the risk of superbug development. At an effluent discharge site, suitable pre-treatment of wastewater containing antimicrobials could maximise the ecological impact with potentially reduced risk to human health. In addressing these points, this paper reviews the applications of decentralized treatment systems toward reducing the concentration of antimicrobials in wastewater. The most commonly used techniques in decentralized wastewater treatment systems for onsite removal of antimicrobials were discussed and evidence suggests that hybrid techniques should be more useful for the efficient removal of antimicrobials. It is concluded that alongside the cooperation of administration departments, health industries, water treatment authorities and general public, decentralized treatment technology can efficiently enhance the removal of antimicrobial compounds, thereby decreasing the concentration of contaminants released to the environment that could pose risks to human and ecological health due to development of antimicrobial resistance in microbes.

SARS-CoV-2 pharmaceutical drugs: a critical review on the environmental impacts, chemical characteristics, and behavior of advanced oxidation processes in water

This review summarizes research data on the pharmaceutical drugs used to treat the novel SARS-CoV-2 virus, their characteristics, environmental impacts, and the advanced oxidation processes (AOP) applied to remove them. A literature survey was conducted using the electronic databases Science Direct, Scopus, Taylor & Francis, Google Scholar, PubMed, and Springer. This complete research includes and discusses relevant studies that involve the introduction, pharmaceutical drugs used in the SARS-CoV-2 pandemic: chemical characteristics and environmental impact, advanced oxidation process (AOP), future trends and discussion, and conclusions. The results show a full approach in the versatility of AOPs as a promising solution to minimize the environmental impact associated with these compounds by the fact that they offer different ways for hydroxyl radical production. Moreover, this article focuses on introducing the fundamentals of each AOP, the main parameters involved, and the concomitance with other sources and modifications over the years. Photocatalysis, sonochemical technologies, electro-oxidation, photolysis, Fenton reaction, ozone, and sulfate radical AOP have been used to mineralize SARS-CoV-2 pharmaceutical compounds, and the efficiencies are greater than 65%. According to the results, photocatalysis is the main technology currently applied to remove these pharmaceuticals. This process has garnered attention because solar energy can be directly utilized; however, low photocatalytic efficiencies and high costs in large-scale practical applications limit its use. Furthermore, pharmaceuticals in the environment are diverse and complex. Finally, the review also provides ideas for further research needs and major concerns.