Emerging pollutants (EPs) in Latin América: A critical review of under-studied EPs, case of study -Nonylphenol

Trace organic compounds and photosensitizing activity in Salvadoran surface and tap water sources: A first look

Despite their potential risks to human health and the environment at ng/L to μg/L concentrations, there has been relatively little effort to measure trace organic compounds (TOrCs) in surface waters of Central America. The concentrations of eighteen TOrCs detected at eleven surface water sites in the Lempa River basin of El Salvador and four sources of drinking water for the cities of San Salvador, Antiguo Cuscatlán, Soyapango, and Santa Tecla are reported here. All samples were analyzed via liquid chromatography with tandem mass spectrometry (LC-MS/MS). Detected TOrCs in surface water included sixteen compounds. Maximum concentrations of 23 μg/L, 6 μg/L, and 2 μg/L were measured for sulfamethoxazole, sucralose, and bisphenol A, respectively. In tap water, a total of fourteen species were found, with peak concentrations of 17 μg/L for sulfamethoxazole, 640 ng/L for bisphenol A, and 224 ng/L for tris(chloropropyl) phosphate (TCPP). To assess potential mechanisms of TOrCs attenuation in surface waters, samples were irradiated with UVA light (315-400 nm) for 12 h in the presence of furfuryl alcohol (FFA) to establish singlet oxygen (1O2) formation. All the samples exhibited photosensitizing activity upon irradiation, resulting in 1O2 concentrations of the order of 10-14 M. To our knowledge, this is the first study that reports the quantification of TOrCs presence and the possible natural attenuation routes in Salvadoran surface and tap water sources.

Effects of maternal nonylphenol exposure on the proliferation of glial cells in the brain of male offspring mice

Glial cells play a significant role in maintaining brain homeostasis and normal brain development, and their functions can be impaired by exposure to endocrine disruptors. 4-n-Nonylphenol (NP), a representative endocrine disruptor, is widely used in personal care products and industrial materials. NP accumulates in various organs, including the brain, of living organisms and adversely influences brain health. However, studies on the effects of NP on glial cells are limited. This study aims to investigate the effects of NP on glial cells using primary mixed glial cells and offspring mice exposed to NP during gestation and lactation. In vitro experiments revealed that NP exposure stimulated the astrocytes and microglia proliferation but not oligodendrocytes. NP exposure activated microglia and reduced myelin protein expression in oligodendrocytes. Moreover, maternal NP exposure increased the numbers of microglia and oligodendrocytes in the cerebral cortex of adult offspring. NP exposure caused anxiety- and depressive-like behaviors in adult mice. Collectively, these findings suggest that maternal NP exposure negatively affects the brain development in adult offspring mice.

Priority list of pharmaceutical active compounds in aquatic environments of Mexico considering their occurrence, environmental and human health risks

Pharmaceutical active compounds (PhACs) are detected pollutants in aquatic environments worldwide at concentrations ranging from ng L-1 to µg L-1. Currently, PhAC monitoring is poorly realized in Mexico. This study proposes a priority list of PhACs in Mexican aquatic environments, considering their occurrence and environmental and human health risks. Ecological risks were assessed as Risk Quotients (RQ) values using the PhAC concentrations detected in surface water, obtaining high risks (RQ > 1) against aquatic organisms, especially of naproxen, ibuprofen, diclofenac, acetaminophen, 17β-estradiol, carbamazepine, ketoprofen, caffeine. In contrast, potential human health risks (RQH) were assessed on the Mexican population using the concentrations quantified in groundwater, demonstrating potential risks (RQH > 0.2) on the population, particularly of DCF and CBZ. Thus, a priority list of PhACs can be used as a reference for environmental monitoring in Mexican water supplies as well as PhACs monitoring in countries of the Caribbean region and Central America.

Nonylphenol ethoxylate degradation in detergents during shelf time, a new exposure pathway, and a perspective on their substitution

Detergents are highly produced pollutants with environmental problems like foam generation and toxic effects in biota. Nonylphenol ethoxylates (NPEs) are efficient, economical, and versatile surfactants, used in detergents for more than 40 years due to their detergency capacity. In the environment, NPE biodegrades into the metabolite nonylphenol (NP), classified as an endocrine disruptor. The identification and quantification of 4-NP in a designed detergent and 30 commercially available detergents were performed to prove the degradation of NPE into 4-NP during storage time. This investigation introduces the first evidence of NPE degradation during storage in commercially available detergents, demonstrating a novel exposure pathway in humans that has not been explored before, representing potential human health risks. Therefore, simple, easy, low-cost, and available approaches to remove and substitute NP is paramount. Alkyl polyglucoside (APG) was assessed as a substitute, and the feasibility of this substitution was proven according to physical and chemical properties, cleaning performance, and antimicrobial properties. NPE substitution in detergents is demonstrated as a viable strategy to minimize exposure risks in humans and the environment.

Presence of pharmaceutical contaminants of emerging concerns in two rivers of western Cuba and their relationship with the extracellular enzymatic activity of microbial communities

In recent years, the concern derived from the presence of emerging contaminants in the environment and the possible effects on the One Health trilogy has increased. This study determined the concentration of pharmaceutical contaminants of emerging concern and their relationship with the extracellular enzymatic activity of microbial communities from two rivers in western Cuba. Two sampling stations were analyzed; one in the Almendares River (urban) and the other in the San Juan River (rural), taking into account the pollution sources that arrive at these stations and previous physicochemical characterizations. Extracellular protease, acid phosphatase, alkaline phosphatase, lipase, and catalase activities in water and sediments were determined and correlated with contaminants of emerging concern determined by liquid chromatography with mass spectrometry. This study evidenced the presence of different pharmaceutical contaminants found in the categories of antihypertensives, stimulants, anti-inflammatories, and antibiotics in both rivers. Concentrations of contaminants of emerging concern were greater in the Almendares River compared to the San Juan River. In addition, through the canonical redundancy analysis, the influence of these contaminants on the extracellular enzymatic activities of microbial communities was documented, where in most cases they inhibit protease, phosphatase, and lipase activities and enhance catalase activity in response to oxidative stress. The present investigation constitutes the first report in Cuba of the presence of pharmaceutical contaminants of emerging concern and one of the few works that exist in the Latin American region.

Industrial waste-based adsorbents as a new trend for removal of water-borne emerging contaminants

Emerging contaminants in wastewater are one of the growing concerns because of their adverse effects on human health and ecosystems. Adsorption technology offers superior performance due to its cost-effectiveness, stability, recyclability, and reliability in maintaining environmental and health standards for toxic pollutants. Despite extensive research on the use of traditional adsorbents to remove emerging contaminants, their expensiveness, lack of selectivity, and complexity of regeneration remain some of the challenges. Industrial wastes viz. blast furnace slag, red mud, and copper slag can be used to develop efficacious adsorbents for the treatment of emerging contaminants in water. Advantages of the use of such industrial wastes include resource utilization, availability, cost-effectiveness, and waste management. Nevertheless, little is known so far about their application, removal efficacy, adsorption mechanisms, and limitations in the treatment of emerging contaminants. A holistic understanding of the application of such unique industrial waste-derived adsorbents in removing emerging contaminants from water is need of the hour to transform this technology from bench-scale to pilot and large-scale applications. This review investigates different water treatment techniques associated with industrial waste-based adsorbents derived from blast furnace slag, red mud, and copper slag. Besides, this review provides important insights into the growing trends of utilizing such novel types of adsorbents to remove emerging contaminants from water with an emphasis on removal efficacy, controlling measures, adsorption mechanisms, advantages, and limitations. The present timely review brings the current state of knowledge into a single reference which could be a strong platform for future research in understanding the latest advancements, decision making, and financial management related to the treatment of wastewater using industrial waste-based adsorbents.

Emerging contaminants and their potential impacts on estuarine ecosystems: Are we aware of it?

Emerging contaminants (ECs) are becoming more prevalent in estuaries and constitute a danger to both human health and ecosystems. These pollutants can infiltrate the ecosystem and spread throughout the food chain. Because of the diversified sources and extensive human activities, estuaries are particularly susceptible to increased pollution levels. A thorough review on recent ECs (platinum group elements, pharmaceuticals and personal care products, pesticides, siloxanes, liquid crystal monomers, cationic surfactant, antibiotic resistance genes, and microplastics) in estuaries, including their incidence, detection levels, and toxic effects, was performed. The inclusion of studies from different regions highlights the global nature of this issue, with each location having its unique set of contaminants. The diverse range of contaminants detected in estuary samples worldwide underscores the intricacy of ECs. A significant drawback is the scarcity of research on the toxic mechanisms of ECs on estuarine organisms, the prospect of unidentified ECs, warrant research scopes.

Plasmonic Nanocomposites of ZnO-Ag Produced by Laser Ablation and Their Photocatalytic Destruction of Rhodamine, Tetracycline and Phenol

Hydrosphere pollution by organic pollutants of different nature (persistent dyes, phenols, herbicides, antibiotics, etc.) is one of the urgent ecological problems facing humankind these days. The task of water purification from such pollutants can be effectively solved with the help of modern photocatalytic technologies. This article is devoted to the study of photocatalytic properties of composite catalysts based on ZnO modified with plasmonic Ag nanoparticles. All materials were obtained by laser synthesis in liquid and differed by their silver content and preparation conditions, such as additional laser irradiation and/or annealing of produced powders. The prepared ZnO-Ag powders were investigated by electron microscopy, X-ray diffraction and UV-Vis spectroscopy. Photocatalytic tests were carried out with well- known test molecules in water (persistent dye rhodamine B, phenol and common antibiotic tetracycline) using LED light sources with wavelengths of 375 and 410 nm. The introduction of small concentrations (up to 1%) of plasmonic Ag nanoparticles is shown to increase the efficiency of the ZnO photocatalyst by expanding its spectral range. Both the preparation conditions and material composition were optimized to obtain composite photocatalysts with the highest efficiency. Finally, the operation mechanisms of the material with different distribution of silver are discussed.

A systematic review on the current situation of emerging pollutants in Mexico: A perspective on policies, regulation, detection, and elimination in water and wastewater

Emerging pollutants (EPs) emerged as a group of new compounds whose presence in the environment has been widely detected in Mexico. In this country, different concentrations of pharmaceutical compounds, pesticides, dyes, and microplastics have been reported, which vary depending on the region and the analyzed matrix (i.e., wastewater, surface water, groundwater). The evidence of the EPs' presence focuses on the detection of them, but there is a gap in information regarding is biomonitoring and their effects in health in Mexico. The presence of these pollutants in the country associated with lack of proper regulations in the discharge and disposal of EPs. Therefore, this review aims to provide a comprehensive view of the current environmental status, policies, and frameworks regarding Mexico's situation. The review also highlights the lack of information about biomonitoring since EPs are present in water even after their treatment, leading to a critical situation, which is high exposure to humans and animals. Although, technologies to efficiently eliminate EPs are available, their application has been reported only at a laboratory scale thus far. Here, an overview of health and environmental impacts and a summary of the research works reported in Mexico from 2014 to 2023 were presented. This review concludes with a concrete point of view and perspective on the status of the EPs' research in Mexico as an alert for government entities about the necessity of measures to control the EPs disposal and treatment.

Molecularly imprinted polymers (MIPs) as efficient catalytic tools for the oxidative degradation of 4-nonylphenol and its by-products

Water pollution is a current global concern caused by emerging pollutants like nonylphenol (NP). This endocrine disruptor cannot be efficiently removed with traditional wastewater treatment plants (WTPs). Therefore, this work aimed to evaluate the adsorption influence of molecularly imprinted polymers (MIPs) on the oxidative degradation (ozone and ultraviolet irradiations) of 4-nonylphenol (4-NP) and its by-products as a coadjuvant in WTPs. MIPs were synthesized and characterized; the effect of the degradation rate under system operating conditions was studied by Box-Behnken response surface design of experiments. The variables evaluated were 4-NP concentration, ozone exposure time, pH, and MIP amount. Results show that the MIPs synthesized by co-precipitation and bulk polymerizations obtained the highest retention rates (> 90%). The maximum adsorption capacities for 4-NP were 201.1 mg L-1 and 500 mg L-1, respectively. The degradation percentages under O3 and UV conditions reached 98-100% at 120 s of exposure at different pHs. The degradation products of 4-NP were compounds with carboxylic and ketonic acids, and the MIP adsorption was between 50 and 60%. Our results present the first application of MIPs in oxidation processes for 4-NP, representing starting points for the use of highly selective materials to identify and remove emerging pollutants and their degradation by-products in environmental matrices.

Potential methanogenic and degradation of nonylphenol ethoxylate from domestic sewage: unravelling the essential roles of nutritional conditions and microbial community

Nonylphenol ethoxylathe (NPEO) is a non-ionic surfactant of increasing concern, used in the formulation of laundry detergents and is frequently found in aquatic environments. The purpose of this study was to evaluate the effects of yeast extract (YE) and sodium fumarate (SF) in NPEO removal from domestic sewage under anaerobic conditions via central composite rotatable design (CCRD) and response surface methodology (RSM). Experiments were designed by varying concentrations of NPEO (1.6-5.8 mg L^-1), YE (131.8-468.2 mg L^-1) and SF (97.7-602.3 mg L^-1) in batch reactors. SF and YE addition significantly influenced NPEO removal and CH₄ production. Optimal values of YE (400 mg L^-1) and SF (200 mg L^-1) result in removal efficiency of 97% for 5 mg L^-1 of NPEO, being mostly removed by biodegradation (86%). Meanwhile COD removal was 95% and methane yield was 134 ± 4 NmLCH₄ g^-¹COD_removed. The most abundant Bacteria genus identified were Macellibacteroides, Longilinea, Petrimonas and Proteiniphilum, while for Archaea, Methanosaeta and Methanoregula were the genera identified in higher relative abundances in optimized conditions.

Insight into chemical features of migrated additives from plastics and associated risks to estuarine ecosystem

Distinct hydrodynamic conditions created a hotspot of plastic and associated additive pollution within estuaries, which is of considerable scientific interest. However, the effects of specific estuarine weathering (severe mechanical wear, constant turbulence, and strong ultraviolet radiation) on migration of additives remain unclear. Therefore, we investigated the release of migrated plastic additives (MPAs) from three representative plastics, namely floating foam, fishing nets, and packaging bags, under simulated estuarine conditions. Sixty-seven MPAs leached out under the wave scenario, greater than those under the ultraviolet radiation (62) and shoal (40) scenarios. We detected forty MPAs in the plastic bag leachates, whereas fewer MPAs were released from the foam and nets. Several MPAs were peculiar to specific plastics, e.g., antistatic and curing agents in the bag and foam leachates, respectively. Particularly, a suite of nonionic surfactants, octylphenol polyethoxylates (OPEO_n), exhibited outstanding responses in the packaging bag leachates and had elevated toxic potential. OPEO_n significantly inhibited the hatching of zebrafish and caused cardiovascular system disorder and morphological distortions even at environmentally relevant concentrations as in estuaries. Collectively, the leaching of MPAs was significantly enhanced by wave actions, and the plastic leachates, particularly those of plastic bags, can cause detrimental risks to the estuarine ecosystem.

Occurrence of emerging contaminants in surface water bodies of a coastal province in Ecuador and possible influence of tourism decline caused by COVID-19 lockdown

Emerging contaminants in water bodies is an issue of concern due to their impact on the ecosystem and human health. The COVID-19 pandemic has forced the implementation of protective measures such as social distancing, lockdowns, and remote work, which have affected the tourism influx. This study aimed to evaluate the occurrence of emerging pollutants in bodies of water in Esmeraldas, a coastal province of Ecuador, before and during the COVID-19 pandemic in a highly touristic region. For this purpose, surface waters from 14 beaches and ten river mouths were sampled at two-time points in November 2019 and November 2020. Compounds widely consumed in Ecuador: acetaminophen, caffeine, sodium diclofenac, trimethoprim, and sulfamethoxazole were extracted from water samples by solid phase extraction SPE and detected with a UPLC-QTOF-MS system. We found a decrease in the occurrence of caffeine from 100 % to 4.2 % of caffeine and 25 % to 0 % of diclofenac, likely related to the decline in tourist afflux due to the lockdown measures. Most of the compounds diminished in terms of frequency and/or concentration; however, as COVID-19 treatments make use of different pharmaceutical compounds such as antivirals, antibiotics, antiparasitics, or glucocorticoids, future studies should include these to assess their environmental impact.

Recent advances in the biological treatment of wastewater rich in emerging pollutants produced by pharmaceutical industrial discharges

Pharmaceuticals and personal care products present potential risks to human health and the environment. In particular, wastewater treatment plants often detect emerging pollutants that disrupt biological treatment. The activated sludge process is a traditional biological method with a lower capital cost and limited operating requirements than more advanced treatment methods. In addition, the membrane bioreactor combines a membrane module and a bioreactor, widely used as an advanced method for treating pharmaceutical wastewater with good pollution performance. Indeed, the fouling of the membrane remains a major problem in this process. In addition, anaerobic membrane bioreactors can treat complex pharmaceutical waste while recovering energy and producing nutrient-rich wastewater for irrigation. Wastewater characterizations have shown that wastewater's high organic matter content facilitates the selection of low-cost, low-nutrient, low-surface-area, and effective anaerobic methods for drug degradation and reduces pollution. However, to improve the biological treatment, researchers have turned to hybrid processes in which all physical, chemical, and biological treatment methods are integrated to remove various emerging contaminants effectively. Hybrid systems can generate bioenergy, which helps reduce the operating costs of the pharmaceutical waste treatment system. To find the most effective treatment technique for our research, this work lists the different biological treatment techniques cited in the literature, such as activated sludge, membrane bioreactor, anaerobic treatment, and hybrid treatment, combining physicochemical and biological techniques.

Integration of ozonation with water treatment for pharmaceuticals removal from Arroio Diluvio in southern Brazil

Pharmaceutical compounds can reach water bodies through sewage systems. The process of water treatment is insufficient for the removal of these contaminants. The ozonation has great potential to be integrated into the treatment, since it promotes the reduction of pharmaceuticals, reduces the generation of disinfection byproducts and can reduce operational costs. In this work, the integration of the ozonation process with water treatment was studied. The ozone was applied in the pre-oxidation and intermediate ozonation stages, to evaluate the dependence of different variables. Water samples were collected from Arroio Diluvio, a river of the city of Porto Alegre (Brazil). The doses of ozone were maintained between 0.5 and 1.0 mgO₃ L^-1 while the coagulant was between 25 and 150 mg·L^-1. Pre-ozonation resulted in a removal of pharmaceuticals at pH 10.0, time of 15 min and coagulant concentration of 52.5 mgL^-1. The intermediate ozonation provided a removal with pH 10.0 and a time of 5 min of bubbling. Based on the results, it was confirmed that the synergy of the ozonation process with conventional water treatment is an effective, sensitive and fast method for the removal of pharmaceuticals from the aqueous medium.

Analysis of Endocrine Disrupting Nonylphenols in Foods by Gas Chromatography-Mass Spectrometry

Nonylphenols (NPs) are classified as endocrine-disrupting chemicals (EDCs), which are known to cause disorders in the endocrine systems of organisms. Due to their high lipophilicity and low degradability, these harmful substances are known to accumulate and persist in the environment, and even enter into the food chain. Analytical methods of liquid-liquid extraction using solid-phase extraction for sample clean-up combined with gas chromatography/mass spectrometry were established to determine the presence of NPs in foods. This study aimed to develop and validate these methods using four food matrices representing high-fat and low-fat solid food, as well as high-fat and low-fat liquid food, groups. The single linear isomer 4-n-NP was used to validate the quantification of NPs, which exist in complex isomer mixtures. Our results showed good linearity, with correlation coefficients exceeding 0.998 for all four matrices. The limits of detection and quantification were 0.37-1.79 and 1.11-5.41 μg/kg, respectively. Recovery rates were 86.8-108.6% and 92.6-101.9% for intraday and interday assays, respectively, and the relative standard deviations (RSDs) were below 12% for both assays. The method was applied to analyze 1185 domestic food samples consumed by Koreans, with NPs detected at concentration ranges of 2.57-269.07 μg/kg. Results for each food type over wide concentration ranges indicated that these compounds are highly dependent on the area of cultivation, and are affected by the levels of those contaminants in different environments. The contents of NPs in foods from animal sources were generally higher than those from plant sources, in particular being higher in the intestines than in lean tissue. The present findings could form the basis for determining the level of dietary exposure to NPs and how each food source contributes to it in South Korea.

Molecularly imprinted polymers for environmental adsorption applications

Molecular imprinting polymers (MIPs) are synthetic materials with pores or cavities to specifically retain a molecule of interest or analyte. Their synthesis consists of the generation of three-dimensional polymers with specific shapes, arrangements, orientations, and bonds to selectively retain a particular molecule called target. After target removal from the binding sites, it leaves empty cavities to be re-occupied by the analyte or a highly related compound. MIPs have been used in areas that require high selectivity (e.g., chromatographic methods, sensors, and contaminant removal). However, the most widely used application is their use as a highly selective extraction material because of its low cost, easy preparation, reversible adsorption and desorption, and thermal, mechanical, and chemical stability. Emerging pollutants are traces of substances recently found in wastewater, river waters, and drinking water samples that represent a special concern for human and ecological health. The low concentration in which these pollutants is found in the environment, and the complexity of their chemical structures makes the current wastewater treatment not efficient for complete degradation. Moreover, these substances are not yet regulated or controlled for their discharge into the environment. According to the literature, MIPs, as a highly selective adsorbent material, are a promising approach for the quantification and monitoring of emerging pollutants in complex matrices. Therefore, the main objective of this work was to give an overview of the actual state-of-art of applications of MIPs in the recovery and concentration of emerging pollutants.

Assessment of contaminants of emerging concern in European apex predators and their prey by LC-QToF MS wide-scope target analysis

Apex predators are good indicators of environmental pollution since they are relatively long-lived and their high trophic position and spatiotemporal exposure to chemicals provides insights into the persistent, bioaccumulative and toxic (PBT) properties of chemicals. Although monitoring data from apex predators can considerably support chemicals' management, there is a lack of pan-European studies, and longer-term monitoring of chemicals in organisms from higher trophic levels. The present study investigated the occurrence of contaminants of emerging concern (CECs) in 67 freshwater, marine and terrestrial apex predators and in freshwater and marine prey, gathered from four European countries. Generic sample preparation protocols for the extraction of CECs with a broad range of physicochemical properties and the purification of the extracts were used. The analysis was performed utilizing liquid (LC) chromatography coupled to high resolution mass spectrometry (HRMS), while the acquired chromatograms were screened for the presence of more than 2,200 CECs through wide-scope target analysis. In total, 145 CECs were determined in the apex predator and their prey samples belonging in different categories, such as pharmaceuticals, plant protection products, per- and polyfluoroalkyl substances, their metabolites and transformation products. Higher concentration levels were measured in predators compared to prey, suggesting that biomagnification of chemicals through the food chain occurs. The compounds were prioritized for further regulatory risk assessment based on their frequency of detection and their concentration levels. The majority of the prioritized CECs were lipophilic, although the presence of more polar contaminants should not be neglected. This indicates that holistic analytical approaches are required to fully characterize the chemical universe of biota samples. Therefore, the present survey is an attempt to systematically investigate the presence of thousands of chemicals at a European level, aiming to use these data for better chemicals management and contribute to EU Zero Pollution Ambition.

Legacy and emerging pollutants in Latin America: A critical review of occurrence and levels in environmental and food samples

The increase and indiscriminate use of personal care products, food products, fertilizers, pesticides, and health products, among others, have resulted/are resulting in extensive environmental contamination. Most of these products contain traces of widespread chemicals, usually known as emerging pollutants (EPs) or pollutants of emerging concern (PEC). The Latin American (LA) region comprises 20 countries with different social and cultural aspects, with 81 % of the population living in urban areas. The LA region has some countries on the top list of users/consumers of EPs, from pesticides and fertilizers to personal care products. However, there is a gap in information related to the distribution of EPs in the environment of this region, with very few existing review texts exploring this issue. Therefore, this present paper advances this approach. An exhaustive literature review, with the selection of 176 documents, provided unique up-to-date information on the presence/distribution of 17 classes of legacy or emerging pollutants in different food and environmental matrices (soil, sediment, water, and air). The study shows that the wide distribution and recorded levels of these pollutants in the continental environment are potential risks to human health, mainly through food and drinking water ingestion. Polycyclic aromatic hydrocarbons are pollutants of deep public concern since they show carcinogenic properties. Several classes of pollutants, like endocrine disruptors, have caused harmful effects on humans and the environment. Besides that, pharmaceutical products and pesticides are compounds of high consumption worldwide, being environmental contamination a real and ongoing possibility. Finally, gaps and future research needs are deeply pointed out.

Emerging contaminants migration from pipes used in drinking water distribution systems: a review of the scientific literature

Migration of emerging contaminants (ECs) from pipes into water is a global concern due to potential human health effects. Nevertheless, a review of migration ECs from pipes into water distribution systems is presently lacking. This paper reviews, the reported occurrence migration of ECs from pipes into water distribution systems in the world. Furthermore, the results related to ECs migration from pipes into water distribution systems, their probable sources, and their hazards are discussed. The present manuscript considered the existing reports on migration of five main categories of ECs including microplastics (MPs), bisphenol A (BPA), phthalates, nonylphenol (NP), perfluoroalkyl, and polyfluoroalkyl substances (PFAS) from distribution network into tap water. A focus on tap water in published literature suggests that pipes type used had an important role on levels of ECs migration in water during transport and storage of water. For comparison, tap drinking water in contact with polymer pipes had the highest mean concentrations of reviewed contaminants. Polyvinyl chloride (PVC), polyamide (PA), polypropylene (PP), polyethylene (PE), and polyethylene terephthalate (PET) were the most frequently detected types of microplastics (MPs) in tap water. Based on the risk assessment analysis of ECs, levels of perfluorooctanoic acid (PFOA), perfluorononanoic acid (PFNA), perfluorodecanoic acid (PFDA), perfluorohexane sulfonate (PFHxS), and perfluorooctane sulfonate (PFOS) were above 1, indicating a potential non-carcinogenic health risk to consumers. Finally, there are still scientific gaps on occurrence and migration of ECs from pipes used in distribution systems, and this needs more in-depth studies to evaluate their exposure hazards on human health.

An overview on surfactants as pollutants of concern: Occurrence, impacts and persulfate-based remediation technologies

Surfactants are molecules that reduce interfacial energy and increase solubility of other pollutants in water. These properties make them suitable for various domestic and industrial applications, soil remediation, pesticide formulation, among others. The increase in their use and the lack of strict regulations regarding their disposal and management is a matter of concern and requires more attention since the release and distribution of these compounds into the environment can modify important water quality parameters. As a result of these changes, different toxicological effects to aquatic organisms are discussed and exposed herein. On this basis, we provide an overview of the classes of surfactants, as well as their occurrence in different aqueous matrices. In addition, existing regulations around the world regarding their concentration limit for different environments are discussed. Current research focuses on the application of conventional treatments, such as biological treatments; notwithstanding, more toxic and bioaccumulative products can be generated. Advanced Oxidation Processes are promising alternatives and have also been widely applied for the removal of surfactants. This study provides, for the first time, an overview of the application of persulfate-based processes for surfactants degradation based on recent literature findings, as well as the various factors related to the activation of the persulfate anions. This review also highlights the challenges and opportunities for future research to overcome the obstacles to the practical application of this process.

Human risk assessment of 4-n-nonylphenol (4-n-NP) using physiologically based pharmacokinetic (PBPK) modeling: analysis of gender exposure differences and application to exposure analysis related to large exposure variability in population

As a toxic substance, 4-n-nonylphenol (4-n-NP) or 4-nonylphenol (4-NP) is widely present in the environment. 4-n-NP is a single substance with a linear-alkyl side chain, but 4-NP usually refers to a random mixture containing various branched types. Unfortunately, human risk assessment and/or exposure level analysis for 4-n-NP (or 4-NP) were almost nonexistent, and related research was urgently needed. This study aimed to analyze the various exposures of 4-n-NP (or 4-NP) through development of a physiologically based-pharmacokinetic (PBPK) model considering gender difference in pharmacokinetics of 4-n-NP and its application to human risk assessment studies. A PBPK model was newly developed considering gender differences in 4-n-NP pharmacokinetics and applied to a human risk assessment for each gender. Exposure analysis was performed using a PBPK model that considered gender differences in 4-n-NP (or 4-NP) exposure and high variabilities in several countries. Furthermore, an extended application was attempted as a human risk assessment for random mixture 4-NP, which is difficult to accurately evaluate in reality. External-exposure and margin-of-safety estimated with the same internal exposure amount differed between genders, meaning the need for a differentiated risk assessment considering gender. Exposure analysis based on biomonitoring data confirmed large variability in exposure to 4-n-NP (or 4-NP) by country, group, and period. External-exposures estimated using PBPK model varied widely, ranging from 0.039 to 63.875 mg/kg/day (for 4-n-NP or 4-NP). By country, 4-n-NP (or 4-NP) exposure was higher in females than in males and the margin-of-safety tended to be low. Overall, exposure to 4-n-NP (or 4-NP) in populations was largely not safe, suggesting need for ongoing management and monitoring. Considering low in vivo accumulation confirmed by PBPK model, risk reduction of 4-n-NP is possible by reducing its use.

Design and application of molecularly imprinted polymers for adsorption and environmental assessment of anti-inflammatory drugs in wastewater samples

In this study, a series of molecularly imprinted polymers (MIPs) have been synthesized using separately diclofenac, naproxen, and ibuprofen as templates with three different polymerization approaches. Two functional monomers, methacrylic acid (MAA) and 2-vinylpyridine (2-VP), were tested and ethylene glycol dimethacrylate (EGDMA) was used as crosslinker; also, template-free polymers (NIPs) were synthesized. It was found that the MIP with the highest retention percentage for diclofenac was the one prepared by the emulsion approach and with MAA (98.3%); for naproxen, the one prepared by the bulk polymerization with MAA (99%); and for ibuprofen, the one synthesized by bulk with 2-VP (97.7%). These three MIPs were characterized by scanning electron microscopy, thermogravimetric test, Fourier transform infrared, specific area measurements, and surface charge. It was found that the emulsion method allowed particle size control, while the bulk method gave heterogeneous particles. The three evaluated MIPs exhibited thermal stability up to 300 °C, and it was observed that 2-VP confers greater stability to the material. From the BET analysis, it was demonstrated that the MIPs and NIPs evaluated are mesoporous materials with a pore size between 10 and 20 nm. In addition, the monomer influenced the surface charge of the material, since the MAA conferred an acidic point of zero charge (PZC), while the 2-VP conferred a PZC of basic character. Through adsorption isotherms, it was determined  that there is a higher adsorption capacity of the MIPs at acidic pH following a pseudo-second-order kinetic model. Finally, the MIPs were used to determine the non-steroidal anti-inflammatory drugs (NSAIDs) understudy in San Luis Potosí, México, wastewater, finding concentrations of 0.642, 0.985, and 0.403 mg L^-1 for DCF, NPX, and IBP, respectively.

Structure–Biodegradability Relationship of Nonylphenol Isomers in Two Soils with Long-Term Reclaimed Water Irrigation

Nonylphenol (NP), as one of the typical endocrine disrupter chemicals (EDCs), has a high detection concentration and frequency in reclaimed water. This research focused on the degradation of NP isomers in two typical reclaimed water irrigation fields in Daxing, China, and Florida, USA. The results showed that the half-lives of NP isomer degradation in the soil of China and Florida were 2.03–8.66 d and 5.16–11.83 d, respectively. The degradation of NP isomers was structure-specific. Isomers of NP5, NP2, NP11, and NP3 had the highest degradation rates in the two soils; NP12, NP7, and NP6 were the isomers with medium degradation rates; and NP4, NP1, NP10, NP9, and NP8 had the slowest degradation rates. Steric hindrance and mean information index for the magnitude of distance (IDWbar) were found to be the better indexes for measuring the degradation of NP isomers compared with the length of the side chain, the type of the substitute, and the molecular connectivity. This study offers insights into the characteristics of NP isomers and two reliable indicators for measuring the degradation of NP isomers, which could provide data support for the environmental fate and the health risk assessment of NP in the future.

Ecotoxicological impacts caused by high demand surfactants in Latin America and a technological and innovative perspective for their substitution

Nowadays, water pollution represents a great concern due to population growth, industrialization, and urbanization. Every day hazardous chemical products for humans and aquatic organisms are disposed of arbitrarily from homes and industries. Even though detergents are considered an essential market, there is evidence of environmental impacts caused by surfactants like nonylphenol ethoxylate (NPE) and linear alkylbenzene sulfonates (LAS). Regulations about maximum allowable concentrations in sewage, surface water, and drinking water are scarce or null, mostly in developing countries like Latin American countries. Therefore, this review explores these two common toxic surfactants (NPE and LAS) and proposes a technological, innovative, and ecological perspective on detergents. Also, it establishes a starting point for industries to minimize adverse effects on humans and environmental health caused by these compounds.

Physicochemical Modeling of the Adsorption of Pharmaceuticals on MIL-100-Fe and MIL-101-Fe MOFs

The adsorption of naproxen (NAP), diclofenac (DFC), and acetaminophen (APAP) molecules from aqueous solutions using MIL-100-Fe and MIL-101-Fe metal organic frameworks (MOFs) has been analyzed and modeled. Adsorption isotherms of these pharmaceuticals were experimentally quantified at 30 and 40°C and pH 7. Textural parameters and surface chemistry of these MOFs were analyzed, and results were utilized to explain the pharmaceutical adsorption mechanism. Density Functional Theory (DFT) calculations were performed to understand the reactivity of pharmaceutical molecules, and a statistical physics model was employed to calculate the main physicochemical parameters related to the adsorption mechanism. Results showed that the adsorption of these pharmaceuticals on MOFs was multimolecular and exothermic. Both MOFs displayed the highest adsorption capacities, up to 2.19 and 1.71 mmol/g, for NAP and DFC molecules, respectively. MIL-101-Fe showed better pharmaceutical adsorption properties than MIL-100-Fe due to its highest content of Fe-O clusters and mesopore volume. Adsorption mechanism of these organic molecules could involve hydrogen bond, van der Waals forces, and electrostatic interactions with MOF surfaces. In particular, MIL-101-Fe MOF is a promising material to prepare composites with competitive adsorption capacities for facing the water pollution caused by pharmaceutical compounds.

Emerging Pollutants in Moroccan Wastewater: Occurrence, Impact, and Removal Technologies

The rapid growth of anthropogenic activities in recent decades has resulted in the appearance of numerous new chemical compounds in the environment, known as “emerging pollutants” (EPs) or “contaminants of emerging concern” (CECs). Although partially or not yet regulated or monitored, there is growing research interest in these EPs among the scientific community because of their bioaccumulation, persistence, and adverse effects. Among these, endocrine disruptors, pesticides, and pharmaceuticals can have harmful impacts on human health and the ecosystem. Conventional wastewater treatment technologies are not effective in removing these contaminants, allowing them to be released into the receiving environment. In order to improve the understanding of emerging pollutants, this review discusses the source, occurrence, and impacts of bisphenol A, atrazine, amoxicillin, and paracetamol as model molecules of emerging environmental pollutants, an issue that remains underrepresented in Morocco. Then, treatment methods for EPs are reviewed, including adsorption, advanced oxidation processes, biodegradation, and hybrid treatment. It is proposed that adsorption and photocatalysis can be used as simple, effective, and environmentally friendly technologies for their removal. Thus, we summarize some of the adsorbent and photocatalyst materials applied in recent work to control these pollutants. Towards the end of this paper, the development of inexpensive and locally available (Morocco) materials to remove these compounds from wastewater is considered.

Insight into the hetero-interactions of 4-nonylphenol with dissolved organic matter: multiple spectroscopic methods, 1H NMR study and principal component analysis

Understanding the interactions between heterogeneous dissolved organic matter (DOM) and nonylphenols (NPs) is essential for predicting their behavior and fate in the environment. Herein, we firstly obtained different MW-fractionated humic acids (HAs) using the ultrafiltration method. Afterward, the molecular weight (MW)-dependent interactions of HAs with 4-nonylphenol (4-NP) were analysed by excitation emission matrix (EEM) fluorescence spectroscopy, fluorescence quenching, UV-vis spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, nuclear magnetic resonance (NMR) spectroscopy and principal component analysis (PCA). EEM spectra indicated that the quenching mechanism was static. In the binding process, the higher MW fractions showed stronger interaction with 4-NP than the lower MW counterparts, exhibiting a clear MW-dependent interaction heterogeneity. The interaction constants for the 4-NP–HAs system were suppressed as the ionic strength decreased and pH increased, which was especially obvious in the binding of 4-NP to the lower MW-fractionated HAs. The FTIR spectra revealed that hydroxyl and aromatics were involved in the interaction process of HA fractions with 4-NP. It was also found from ¹H NMR that π–π interactions between aromatic rings of 4-NP and MW-fractionated HAs were responsible for the complexation. The correlation analysis and PCA results indicated that aromaticity and MW play important roles in the interaction process and confirmed an obvious interaction heterogeneity among MW-fractionated HAs samples. This work highlighted MW-dependent interaction heterogeneities of HA, which suggested that heterogeneity in MW distribution should be taken into consideration when exploring the fate and biogeochemistry cycling of 4-NP from contaminated environments.

Multiple spectroscopic methods, ¹H NMR study and PCA were used to investigate the heterointeractions of 4-nonylphenol with humic acids.

A Review on Emerging Pollutants in the Water Environment: Existences, Health Effects and Treatment Processes

Emerging pollutants (EPs), also known as micropollutants, have been a major issue for the global population in recent years as a result of the potential threats they bring to the environment and human health. Pharmaceuticals and personal care products (PPCPs), antibiotics, and hormones that are used in great demand for health and cosmetic purposes have rapidly culminated in the emergence of environmental pollutants. EPs impact the environment in a variety of ways. EPs originate from animal or human sources, either directly discharged into waterbodies or slowly leached via soils. As a result, water quality will deteriorate, drinking water sources will be contaminated, and health issues will arise. Since drinking water treatment plants rely on water resources, the prevalence of this contamination in aquatic environments, particularly surface water, is a severe problem. The review looks into several related issues on EPs in water environment, including methods in removing EPs. Despite its benefits and downsides, the EPs treatment processes comprise several approaches such as physico-chemical, biological, and advanced oxidation processes. Nonetheless, one of the membrane-based filtration methods, ultrafiltration, is considered as one of the technologies that promises the best micropollutant removal in water. With interesting properties including a moderate operating manner and great selectivity, this treatment approach is more popular than conventional ones. This study presents a comprehensive summary of EP’s existence in the environment, its toxicological consequences on health, and potential removal and treatment strategies.

Current Applications of Magnetic Nanomaterials for Extraction of Mycotoxins, Pesticides, and Pharmaceuticals in Food Commodities

Environmental pollutants, such as mycotoxins, pesticides, and pharmaceuticals, are a group of contaminates that occur naturally, while others are produced from anthropogenic sources. With increased research on the adverse ecological and human health effects of these pollutants, there is an increasing need to regularly monitor their levels in food and the environment in order to ensure food safety and public health. The application of magnetic nanomaterials in the analyses of these pollutants could be promising and offers numerous advantages relative to conventional techniques. Due to their ability for the selective adsorption, and ease of separation as a result of magnetic susceptibility, surface modification, stability, cost-effectiveness, availability, and biodegradability, these unique magnetic nanomaterials exhibit great achievement in the improvement of the extraction of different analytes in food. On the other hand, conventional methods involve longer extraction procedures and utilize large quantities of environmentally unfriendly organic solvents. This review centers its attention on current applications of magnetic nanomaterials and their modifications in the extraction of pollutants in food commodities.

Elimination of pharmaceutical pollutants by solar photoelectro-Fenton process in a pilot plant

In this study, the simultaneous degradation of antibiotics (ampicillin, sulfamethazine, and tetracycline; and non-steroidal anti-inflammatories (diclofenac and salicylic acid)) including the total organic carbon abatement by solar photoelectro-Fenton process was assessed. Eight liters of solution containing the mixture of the five pharmaceuticals in 1 mmol L^-1 Fe²⁺, 0.05 mol L^-1 Na₂SO₄ at pH 3 and 35 °C were electrolyzed applying different current densities (j = 10, 25, and 50 mA cm^-2) in a solar-electrochemical pilot plant. The pilot plant was equipped with an electrochemical filter press cell with a dimensionally stable anode (DSA type) and an air-diffusion cathode coupled to a solar photoreactor exposed directly to sunlight radiation. All pharmaceuticals were degraded during the first 10 min. A TOC removal efficiency of 99.2% after 100 min of treatment with an energy consumption of 534.23 kW h (kg_TOC)^-1 and 7.15 kW h m^-3 was achieved. The pharmaceutical concentration decay followed a pseudo-first-order kinetics. The specific energy per unit of mass of ampicillin, diclofenac, salicylic acid, sulfamethazine, and tetracycline was obtained at 11.73, 19.56, 35.2, 11.73, and 39.32 kW h (kg_PD)^-1 for ampicillin, diclofenac, salicylic acid, sulfamethazine, and tetracycline, respectively. With our results, we demonstrated that SPEF is an emerging technology for the treatment of this type of pollutants in short time.

Caffeine removal from aqueous media by adsorption: An overview of adsorbents evolution and the kinetic, equilibrium and thermodynamic studies

Caffeine is an emerging pollutant and is considered the most representative pollutant of the Pharmaceutical Active due to its high consumption by the general population. It can be used to track pollution caused by humans. Different technologies have been employed to remove the caffeine from aqueous media, however the adsorption has been preferred due to its simplicity, high removal efficiency, operational and implementation facility and low cost. This paper provides a systematic review of the published peer-reviewed literature concerned with caffeine removal by the adsorption process. The Scopus and ScienceDirect databases were used to identify relevant articles researches on caffeine removal. Many authors have studied caffeine's adsorption equilibrium in aqueous media, different conditions, and different adsorbents. This paper aims to uncover the overall trend of adsorbent used, kinetic and thermodynamic studies. The impact of pH, temperature, adsorbent dosage and competitive effect were presented and analyzed. It was observed that the adsorption capacities ranged between 10 and 1000 mg g^-1, according to the nature and properties of the adsorbent. The pseudo-second order (kinetic model) and the Langmuir isotherm model showed the best adjustment of the experimental data from caffeine adsorption in most studies. The mechanistic understanding of adsorption and the development of new adsorbents are still a matter of future research, as well as the use of other kinetic models based on statistical factors and the thermodynamic studies should be considered.

Linkages between environmental issues and zoonotic diseases: with reference to COVID-19 pandemic

Coronavirus disease (COVID-19) caused by severe acute respiratory syndrome (SARS) coronavirus 2 (SARS-CoV-2) has taken mankind by surprise with various unprecedented impacts on human life around the globe. This zoonotic pandemic is proving to be the most destructive disease outbreaks since decades. The increasing human population and anthropogenic activities have impacted the environment and have direct linkages with the current and other recent outbreaks of zoonotic diseases. Despite having a difference in their origin, major reasons behind the emergence and spread of zoonotic pandemics are related to activities such as habitat fragmentation, deforestation, biodiversity loss, intensive agriculture and livestock farming, uncontrolled urbanization, pollution, climate change and bushmeat hunting and trading. It is important to focus on environmental and climatic factors that are involved in the emergence of such pandemics involving novel human pathogens and viruses in particular. Research and data analysis, particularly in relation to COVID-19, has shown that meteorological factors along with population density and living conditions (particularly in the urban and semi-urban areas) play a crucial role in the intensity, evolution and spread of SARS-CoV-2. This particular virus is novel but coronaviruses have a long history and are known to cause disease outbreaks earlier as well. COVID-19 pandemic provides learning for the future, in particular the importance of environmental sustainability for controlling such outbreaks. A strategic plan can be developed involving policy-makers, organizations, and governments to control the onset and spread of the novel pathogens. This review-based study recommends that prevention of COVID-19 like pandemics from re-occurring is through tackling the issues related to the environment by controlling anthropogenic activities. It will also be important to track the lineage and future evolution course of such human pathogens so as to determine the nexus of environmental and biological factors in the development and spread of novel strains.

Environmental aspects of hormones estriol, 17β-estradiol and 17α-ethinylestradiol: Electrochemical processes as next-generation technologies for their removal in water matrices

Hormones as a group of emerging contaminants have been increasingly used worldwide, which has increased their concern at the environmental level in various matrices, as they reach the water bodies through effluents due to the ineffectiveness of conventional treatments. Here we review the environmental scenario of hormones estriol (E3), 17β-estradiol (E2), and 17α-ethinylestradiol (EE2), explicitly their origins, their characteristics, interactions, how they reach the environment, and, above all, the severe pathological and toxicological damage to animals and humans they produce. Furthermore, studies for the treatment of these endocrine disruptors (EDCs) are deepened using electrochemical processes as the remediation methods of the respective hormones. In the reported studies, these micropollutants were detected in samples of surface water, underground, soil, and sediment at concentrations that varied from ng L^-1 to μg L^-1 and are capable of causing changes in the endocrine system of various organisms. However, although there are studies on the ecotoxicological effects concerning E3, E2, and EE2 hormones, little is known about their environmental dispersion and damage in quantitative terms. Moreover, biodegradation becomes the primary mechanism of removal of steroid estrogens removal by sewage treatment plants, but it is still inefficient, which shows the importance of studying electrochemically-driven processes such as the Electrochemical Advanced Oxidation Processes (EAOP) and electrocoagulation for the removal of emerging micropollutants. Thus, this review covers information on the occurrence of these hormones in various environmental matrices, their respective treatment, and effects on exposed organisms for ecotoxicology purposes.

Uptake and metabolism of nonylphenol in plants: Isomer selectivity involved with direct conjugation

Nonylphenol (NP), an environmental estrogen, is actually a complicated mixture of isomers, although it is commonly considered to be a single compound. There are many routes for crops to come into contact with NP; however, little is known about the plant uptake and metabolism of NP, especially at the isomer level. This study comparatively evaluated the uptake and in-planta metabolism of 4-n-NP and its 10 isomers using both carrot cells and intact plants. The rapid metabolism of 4-n-NP was observed in the callus tissues and intact plants with half-lives of 2 h and 4.72 d, respectively. Six conjugates of 4-n-NP were identified in the cell extracts using high resolution mass spectrometry. The primary transformation pathway was found to be the direct conjugation (Phase II metabolism) with the parent compound at the hydroxyl. Furthermore, 4-NP isomers with short side chains and/or bulky α-substituents were more resistant to plant metabolism and showed a greater tendency for accumulation. The influence of the side chains to the isomer selectivity was verified by the molecular docking between glycosyltransferase and 4-NP isomers. This study highlighted the necessity to consider isomer-specificity in the plant accumulation of NP and the environmental and human health implications of NP conjugates.

Permanently Positively Charged Stable Isotope Labeling Agents and Its Application in the Accurate Quantitation of Alkylphenols Migrated from Plastics to Edible Oils

A new permanently positively charged stable isotope labeling (SIL) agent pair, 4-(((2,5-dioxopyrrolidin-1-yl)oxy)carbonyl)-N,N,N-trimethylbenzenaminium iodide(DPTBA) and its deuterated counterpart d₃-DPTBA, was designed and synthesized. The SIL agents were applied to the liquid chromatography-tandem mass spectrometry analysis of alkylphenols. Light labeled standards and heavy labeled samples were mixed and analyzed simultaneously. Matrix effect which mainly occurred during the ionization process was minimized because of the identical ionization processes between samples and standards. Meanwhile, derivatization made alkylphenols be positively charged, and thus the sensitivity was enhanced. The limits of detection were in the range of 1.5-1.8 ng/L, and the limits of quantitation were in the range of 4.8-6.1 ng/L. The developed method was applied to analyze alkylphenols migrated from plastics to edible oils. The recoveries for all analytes were in the range of 88.6-95.3%, while the matrix effects for all analytes were in the range of 96.2-99.6%.