Interactions between microplastics and organic compounds in aquatic environments: A mini review

Unveiling the mechanism of the effect of polyethylene microplastics on phenanthrene degradation in agricultural soils through DNA-based stable isotope probing

Polyethylene microplastics (MPs) derived from plastic mulch films are ubiquitous in agricultural soils. However, the mechanism underlying the effect of MPs on the degradation of polyaromatic hydrocarbons remains unclear. In this study, we investigated the influence of MPs amendment on the profiles of active microbes involved in phenanthrene (PHE) degradation in agricultural soils using DNA-based stable isotope probing (SIP) combined with high-throughput sequencing. Results showed that biodegradation dominated the removal of PHE, and MPs promoted the PHE degradation rate from 79.0 % to 92.3 % in agricultural soils. The addition of MPs could stimulate and prolong the activities of original active microbes responsible for PHE degradation including the genera Flavisolibacter and Nocardioides. Furthermore, the presence of MPs could also recruit novel active microbes, including Gaiella, Methylopila, JGI_0001001-H03, and unclassified Intrasporangiaceae, to participate in PHE degradation. Notably, Flavobacterium, Methylopila, Lysobacter, and unclassified Blastocatellaceae were directly linked with PHE degradation for the first time by SIP. This study provides novel insights into the mechanism underlying the effect of MPs on PHE degradation and enhances our comprehensive understanding of the co-contamination of MPs and PHE in agricultural soils.

Impacts of micro/nano plastics on the ecotoxicological effects of antibiotics in agricultural soil: A comprehensive study based on meta-analysis and machine learning prediction

Micro/nano plastics (M/NPs) and antibiotics, as widely coexisting pollutants in environment, pose serious threats to soil ecosystem. The purpose of this study was to systematically evaluate the ecological effects of the co-exposure of M/NPs and antibiotics on soil organisms through the meta-analysis and machine learning prediction. Totally, 1002 data set from 38 articles were studied. The co-exposure of M/NPs significantly promoted the abundance (62.68 %) and migration level (55.22 %) of antibiotic contamination in soil, and caused serious biotoxicity to plants (-12.31 %), animals (-12.03 %), and microorganisms (35.07 %). Using 10 variables, such as risk response categories, basic physicochemical properties, exposure objects, and exposure time of M/NPs, as data sources, Random Forests (RF) and eXtreme Gradient Boosting (XGBoost) models were developed to predict the impacts of M/NPs on the ecotoxicological effects of antibiotics in agricultural soil. The effective R2 values (0.58 and 0.60, respectively) indicated that both models can be used to predict the future ecological risk of M/NPs and antibiotics coexistence in soil. Particle size (13.54 %), concentration (5.02 %), and type (11.18 %) of M/NPs were the key characteristic parameters that affected the prediction results. The findings of this study indicate that the co-exposure of M/NPs and antibiotics in soil not only exacerbates antibiotic contamination levels but also causes severe toxic effects to soil organism. Furthermore, this study provides an effective approach for ecological risk assessment of the coexistence of M/NPs and antibiotics in environment.

Metabolomics and microbiomics revealed the combined effects of different-sized polystyrene microplastics and imidacloprid on earthworm intestinal health and function

The coexistence of pesticides and plastic film residues in agricultural soils poses a significant threat to soil organisms due to their potential long-term contamination and combined toxic effects. Specifically, earthworms are at risk of simultaneously ingesting residual pesticides and microplastics, yet the impact of this combined exposure on their intestinal health and function remains poorly understood. In this study, earthworm (Eisenia fetida) were single and combined exposed to three particle sizes (10 μm, 500 μm, and 2 mm) of polyethylene microplastics (PE MPs) and imidacloprid (IMI) for 28 days, respectively. Our findings underscore that compared to single exposures, the combined exposure inflicted more profound injuries on intestinal tissues and elicited a heightened activation of intestinal digestive enzymes. Furthermore, the combined exposure significantly perturbed the relative abundance of several pivotal metabolic-associated gut microbiota, fostering an enrichment of pathogenic species. Metabolomics analysis showed combined exposure increased differential metabolites, disrupting amino acid, fatty acid, and carbohydrate metabolism in earthworm intestines, potentially hindering nutrient absorption and causing toxic metabolite accumulation. An integrated omics analysis implies that combined exposures have the potential to disrupt the relative abundance of crucial gut microbiota in earthworms, thereby altering their intestinal metabolism and subsequently impacting intestinal health and functionality. Overall, the results reveal that combined exposure of IMI and PE MPs exacerbate the negative effects on earthworm gut health, and this study holds significant implications for the holistic understanding of the combined toxic effects of microplastics and pesticide on soil ecosystems.

Mechanistic inferences from empirical and LSER modeling approaches concerning sorption of organic compounds by pristine and aged PE microplastics

This study investigates the effect of aging of polyethylene (PE) microplastics (MP) on its interaction with organic compounds (OCs). Initially, pristine PE MPs were subjected to UV-aging, followed by characterization of their chemical structure and thermal properties. UV-aging resulted in formation of new functional groups such as carbonyl (CO), -OH, and unsaturation, along with changes in crystallinity and melting temperature. Complimentary sorption experiments were conducted with a suite of environmentally significant and structurally related OCs i.e., phenol, 2,3,6-trichlorophenol, triclosan, 1,1,2,2-tetrachloroethane, tetrachloroethylene and hexachloroethane, using pristine and UV-aged PE MPs. In addition to the distribution coefficients (i.e., KPEW) obtained experimentally, relevant data from the literature was also gathered for the purpose of developing a poly-parametric linear free energy relationship (pp-LFER) model. Two models were developed for predicting sorption onto: (i) only UV-aged PE, yielding an R2 = 0.96, RMSE = 0.19 (n = 16), (ii) PE that has undergone various types of aging, yielding an R2 = 0.83, RMSE = 0.68 (n = 36). Lastly, a direct comparison was performed between two pp-LFERs developed for the interaction of the same OCs with pristine vs. aged PE (n = 7). In addition to the predictive strength, the system coefficients enabled mechanistic inferences to be made; such that while molecular volume or non-specific hydrophobic interactions govern OC-pristine PE interactions, polar interactions and H-bonding also play important roles for OC-aged PE interactions. Overall, findings suggested that changes of MP surfaces under environmentally relevant aging conditions indicated an impact on their interactions with OCs in the environment.

A comprehensive review of microplastic aging: Laboratory simulations, physicochemical properties, adsorption mechanisms, and environmental impacts

As a new type of ecological environment problem, microplastic pollution is a severe challenge faced by the world, and its threat and potential risk to the ecosystem have become a hot research spot in the current environmental field. Microplastics (MPs) in the natural environment will experience aging effect, aging will change the physical and chemical properties of MPs and affect the adsorption behavior. Recently reported characterization techniques of MPs and laboratory simulation of aging are reviewed. The aging mechanism between MPs and different pollutants and the intervention mechanism of environmental factors (MPs, pollutants and water quality environment) were revealed. In addition, to further understand the potential ecological toxicity of MPs after aging, the release and harm of additives during aging, produce the environmentally persistent free radicals, and the mechanism of reactive oxygen species (ROS) removal of pollutants adsorbed on the surface of MPs were summarized. Future research efforts should focus more on bridging the disparity between laboratory aging simulations and natural environmental conditions to enhance the authenticity and ecological relevance of such studies. The ROS production mechanism of MPs provides a reference direction for removing pollutants adsorbed by aged MPs.

The addition of humic acid into soil contaminated with microplastics enhanced the growth of black gram (Vigna mungo L. Hepper) and modified the rhizosphere microbial community

Microplastics have polluted agricultural soils, posing a substantial risk to crop productivity. Moreover, the presence of microplastic pollution has caused a disturbance in the composition of the microbial community in the soil surrounding plant roots, therefore impacting the growth of beneficial bacteria. A study was conducted to examine if humic acid (HA) can counteract the harmful effects of microplastics (MPs) on the growth of black gram crops and the composition of the rhizosphere soil microbial community, to reduce the negative impacts of microplastics on these microorganisms and crops. The research was carried out using mud pots and the plastic utilized for the experiment consisted of 60% high-density polyethylene (HDPE) and 40% polypropylene (PP). The soil was enriched with lignite-based potassium humate, which had a pH range of 8.0-9.5 and with 65% humic acid. The experiment consisted of six treatments: T1, which served as the control without HA and MP; T2, which involved the use of HA at a concentration of 0.15% w/w; T3, which involved the use of MP at a concentration of 0.2% w/w; T4, which involved the use of MP at a concentration of 0.4% w/w; T5, which involved the combination of HA at a concentration of 0.15% w/w and MP at a concentration of 0.2% w/w; and T6, which involved the combination of HA at a concentration of 0.15% w/w and MP at a concentration of 0.4% w/w. The plant growth characteristics, including germination percentage, nodule number, and chlorophyll content, were measured. In addition, the DNA obtained from the rhizosphere soil was analyzed using metagenomics techniques to investigate the organization of the microbial population. Seedlings in soil polluted with MP exhibited delayed germination compared to seedlings in uncontaminated soil. Following 60 days of growth, the soil samples treated with T5 (0.2% MP and 0.15% HA w/w) had the highest population of bacteria and rhizobium, with counts 5.58 ± 0.02 and 4.90 ± 0.02 CFU g-1 soil. The plants cultivated in T5 had the most elevated chlorophyll-a concentration (1.340 ± 0.06 mg g-1), and chlorophyll-b concentration (0.62 ± 0.02 mg g-1) while those cultivated in T3 displayed the lowest concentration of chlorophyll-a (0.59 ± 0.02 mg g-1) and chlorophyll-b (0.21 ± 0.04 mg g-1). Within the phylum, Proteobacteria had the highest prevalence in all treatments. However, when the soil was polluted with MPs, its relative abundance was reduced by 8.4% compared to the control treatment (T1). Conversely, treatment T5 had a 3.76% rise in relative abundance when compared to treatment T3. The predominant taxa found in soil polluted with MP were Sphingomonas and Bacillus, accounting for 19.3% of the total. Sphingomonas was the predominant genus (21.2%) in soil polluted with MP and supplemented with humic acid. Humic acid can be used as a soil amendment to mitigate the negative effects of MPs and enhance their positive advantages. Research has demonstrated that incorporating humic acid into soil is a viable method for maintaining the long-term integrity of soil's physical, chemical, and biological characteristics.

Enhancing the degradation of microplastics through combined KMnO4 oxidation and UV radiation

The pervasive issue of microplastics in aquatic environments presents a formidable challenge to traditional water treatment methodologies, including those utilizing KMnO4. This study pioneers advanced oxidation processes (AOPs) method aimed at improving the degradation of PE microplastics by employing a dual treatment strategy that combines KMnO4 oxidation with UV irradiation. Detailed analysis of the surface modifications and chemical functional groups of the treated PE microplastics revealed the establishment of Mn-O-Mn linkages on their surfaces. Weight reductions of 3.9%, 4.9%, and 7.5% were observed for the KMnO4/UVA, KMnO4/UVB, and KMnO4/UVC treatments over seven days, respectively. The emergence of carboxyl and hydroxyl groups played a crucial role in accelerating the degradation process. Notably, the combined application of UVC rays and KMnO4 resulted in the most effective degradation of PE microplastics observed in our study. The process significantly enhanced the formation of MnO2 particles from KMnO4 oxidation, with concentrations ranging from 0.036 to 0.070 mM for KMnO4/UVA, 0.066-0.097 mM for KMnO4/UVB, and 0.086-0.180 mM for KMnO4/UVC. Furthermore, the influence of varying pH levels, KMnO4 concentrations, and different water sources on the degradation efficacy was investigated. The pivotal role of free radicals and reactive manganese species in promoting the degradation of PE microplastics was identified. A comparative evaluation with treatments solely utilizing KMnO4 or UV light highlighted the enhanced effectiveness of the combined approach, demonstrating its potential as an efficient solution for reducing microplastic contamination in aquatic systems.

Microplastics-biofilm in aquatic ecosystem: Formation, pollutants complexation, greenhouse gas emission and ecotoxicology

The omnipresent microplastics (MPs) have gradually become a significant environmental problem due to its adverse consequences for ecological systems. MPs serve as substrates for biofilms colonization, which enhances adsorption of harmful contaminants on MPs surface in the aquatic ecosystem. The present study provides a critical discussion on the mechanism involved in MPs-biofilm formation, microbial colonization and the robust factors influencing the process in the aquatic ecosystem. Subsequently, the impact of MPs-biofilm on adsorption of inorganic and organic contaminants is explored. The ecological significance of MPs-biofilm associated pollutant complex for promoting greenhouse gases (GHGs) emissions from aquatic ecosystem is extensively discussed for understanding the climatic risk. Furthermore, the discussion is extended over ecotoxicological impact of MPs-biofilm on aquatic biodiversity and humans. The protective extracellular polymeric substances secreted by colonised bacteria over MPs during biofilm formation creates sticky MPs surface for heteroaggregates formation with swift adsorption of chemical compounds and microorganisms. MPs with functional aromatic groups facilitate the bacterial adhesion on the surface, but affect formation of biofilm. Alternatively, MPs-biofilm promotes the Mn and Fe hydrous oxides formation that can co-precipitate with heavy metal ions and facilitate in remediation measures. However, MPs biodegradation generates GHGs emission per unit mass, comparably more from freshwater than marine ecosystem. Considering the toxicity, MPs-biofilm induces the oxidative response in fishes, causing painful death and thus, destroys aquatic biodiversity. This study will be useful to address MPs-biofilm associated pollution scenario via trace, test and treat strategy involving future engineering research framework for ecological restoration.

Polyethylene microplastic pollution changes the electrical resistance and thermal conductivity of loess soil

While plastics provide convenience, they also endanger the safety of the natural environment. Microplastic pollution caused by plastic aging has become an urgent concern in public places. In order to study the effects of microplastics on soil physical properties, the electrical resistance and thermal conductivity of soils containing different polyethylene and moisture content were tested. The results show that polyethylene have two effects on soil electrical resistance: one is that the plastic particles increase electrical resistance, and the other is that the electrostatic field carried by the plastic particles reduces electrical resistance. The effect of the two factors is balanced by the content of polyethylene at 6-8%. When the polyethylene content of the soil was 6% and 10%, the coefficients of electrical resistance variation were 0.89, 0.67, 0.85, 0.96, 0.97, 0.99 and 0.95, 0.68, 0.71, 0.93, 0.95, 0.96, respectively. Polyethylene alters soil properties by affecting water distribution through hydrophobicity. The water content gradually increases to 10%, the liquid conduction area inside the soil increases, and the higher the soil's ability to conduct electricity and heat. The results can provide theoretical reference for evaluating and controlling soil microplastic pollution.

Micro(nano)plastic and Related Chemicals: Emerging Contaminants in Environment, Food and Health Impacts

Microplastic pollution is a problem of increasing concern in food, and while food safety issues around the world are serious, an increasing number of food safety issues related to microplastics have become the focus of people's attention. The presence of microplastics in food is a worldwide problem, and they are present in all kinds of foods, foods of both animal and plant origin, food additives, drinks, plastic food packaging, and agricultural practices. This can cause problems for both humans and the environment. Microplastics have already been detected in human blood, heart, placenta, and breastmilk, but their effects in humans are not well understood. Studies with mammals and human cells or organoids have given perspective about the potential impact of micro(nano)plastics on human health, which affect the lungs, kidneys, heart, neurological system, and DNA. Additionally, as plastics often contain additives or other substances, the potentially harmful effects of exposure to these substances must also be carefully studied before any conclusions can be drawn. The study of microplastics is very complex as there are many factors to account for, such as differences in particle sizes, constituents, shapes, additives, contaminants, concentrations, etc. This review summarizes the more recent research on the presence of microplastic and other plastic-related chemical pollutants in food and their potential impacts on human health.

Accumulation characteristics and source analysis of microplastics derived traffic of soil in the Tibetan Plateau

The development of transportation infrastructure can stimulate economic growth. However, the environmental and human health risks associated with the release of traffic-derived microplastics (MPs) into the ecosystem must also be considered. This study examined four types of soil samples collected from the Qinghai-Tibetan Plateau along the Gemang Highway. The abundance, size, morphology, and types of MPs were analyzed using laser direct infrared (LDIR) spectroscopy to gain a better understanding of their distribution and characteristics. The average abundance of MPs in the study area was 2247.92 ± 2053.82 n/kg. It showed the characteristics of wasteland (4726.67 ± 2956.76 n/kg) > wolfberry plantation (3294.44 ± 2881.93 n/kg) > sandy land (1519.44 ± 282.65 n/kg) > soil along the highway (1144.44 ± 611.01 n/kg). 67.25 % of MPs had a particle size of less than 100 µm, posing greater environmental risks. The 6 factors identified by the PMF model suggested a variety of potential sources of MPs and highlighted their connections to the transportation sector. The ecological risk assessment of MPs demonstrated a significant degree of risk, with particular concern regarding more toxic plastics use. This study provides fundamental data for the source analysis and ecosystem risk assessment of MPs derived traffic.

The combined effects of polystyrene nanoplastics and dissolved organic matter on the environmental bioavailability of carbamazepine

The bioavailability of active pharmaceutical ingredients (APIs) plays a crucial role in determining the toxicity and risk of contaminants in the environment. However, the bioavailability of APIs in complex environmental matrices is still unclear. In this study, the combined effects of polystyrene nanoplastics (PS NPs) with various particle sizes (50, 100, and 1000 nm) and fulvic acid (FA) on the bioavailability of carbamazepine (CBZ) were investigated via negligible depletion solid-phase microextraction (nd-SPME) and Daphnia magna (D. magna) accumulation. The uptake kinetic study revealed that both PS NPs and FA reduced the elimination rate (k2) in most cases. The availability of CBZ to nd-SPME was determined by the hydrodynamic particle size of PS NPs, whereas the bioavailability to D. magna depended on the intrinsic particle size. The CBZ bioavailability was greater in co-exposed matrices due to the attenuated sorption of PS NPs to CBZ by FA modification. Notably, co-exposure of PS NPs and FA resulted in a higher bioaccumulation factor (BAF) of CBZ, probably due to the desorption and reabsorption of particle-associated CBZ. This study demonstrated that both PS NP particle size and FA binding affect the bioavailability of CBZ, and nd-SPME can mimic only the bioaccumulation of CBZ via diffusion.

How micro-/nano-plastics influence the horizontal transfer of antibiotic resistance genes - A review

Plastic debris such as microplastics (MPs) and nanoplastics (NPTs), along with antibiotic resistance genes (ARGs), are pervasive in the environment and are recognized as significant global health and ecological concerns. Micro-/nano-plastics (MNPs) have been demonstrated to favor the spread of ARGs by enhancing the frequency of horizontal gene transfer (HGT) through various pathways. This paper comprehensively and systematically reviews the current study with focus on the influence of plastics on the HGT of ARGs. The critical role of MNPs in the HGT of ARGs has been well illustrated in sewage sludge, livestock farms, constructed wetlands and landfill leachate. A summary of the performed HGT assay and the underlying mechanism of plastic-mediated transfer of ARGs is presented in the paper. MNPs could facilitate or inhibit HGT of ARGs, and their effects depend on the type, size, and concentration. This review provides a comprehensive insight into the effects of MNPs on the HGT of ARGs, and offers suggestions for further study. Further research should attempt to develop a standard HGT assay and focus on investigating the impact of different plastics, including the oligomers they released, under real environmental conditions on the HGT of ARGs.

Polycyclic aromatic hydrocarbon derivatives onto polar microplastics of polyurethane: equilibrium, thermodynamics, and kinetics of monolayer-multilayer adsorption

The study of the adsorption of polycyclic aromatic hydrocarbons on microplastics (MPs) has attracted much attention as to how microplastics can act as carriers of these pollutants. Polyurethane (PU) is one of the MPs found in aquatic environments, containing different functional groups it can interact with polar and nonpolar molecules. PAH derivatives (dPAHs) present different properties and thus can be adsorbed by different interactions; thus, this study investigated the adsorption of fluorene (FLN), dibenzothiophene (DBT), dibenzofuran (DBF), and carbazole (CBZ) onto PU MP. The Langmuir, Freundlich, and BET isotherm models were examined, and the BET model best fitted. The adsorption was a nonspontaneous process, exothermic for mono- and multilayer formation for FLN, DBT, and CBZ, and endothermic for DBF monolayer formation. The adsorption monolayer was formed by van der Waals forces, H─bonding, and π─π interactions, while the formation of the multilayer can be explained by π─π and hydrophobic interactions. The pseudo-second-order model proved to be more consistent for the adsorption of dPAHs. The adsorption in artificial seawater shows no significant differences for the monolayer but favored the adsorption multilayer due to the salting-out effect. Due to the existence of several adsorption mechanisms, PU MP interacts with dPAHs in greater quantities when compared to a MP with a simpler structure.

The effects of microplastics on ionoregulatory processes in the gills of freshwater fish and invertebrates: A prospective review

From review of the very few topical studies to date, we conclude that while effects are variable, microplastics can induce direct ionoregulatory disturbances in freshwater fish and invertebrates. However, the intensity depends on microplastic type, size, concentration, and exposure regime. More numerous are studies where indirect inferences about possible ionoregulatory effects can be drawn; these indicate increased mucus production, altered breathing, histopathological effects on gill structure, oxidative stress, and alterations in molecular pathways. All of these could have negative effects on ionoregulatory homeostasis. However, previous research has suffered from a lack of standardized reporting of microplastic characteristics and exposure conditions. Often overlooked is the fact that microplastics are dynamic contaminants, changing over time through degradation and fragmentation and subsequently exhibiting altered surface chemistry, notably an increased presence and diversity of functional groups. The same functional groups characterized on microplastics are also present in dissolved organic matter, often termed dissolved organic carbon (DOC), a class of substances for which we have a far greater understanding of their ionoregulatory actions. We highlight instances in which the effects of microplastic exposure resemble those of DOC exposure. We propose that in future microplastic investigations, in vivo techniques that have proven useful in understanding the ionoregulatory effects of DOC should be used including measurements of transepithelial potential, net and unidirectional radio-isotopic ion flux rates, and concentration kinetic analyses of uptake transport. More sophisticated in vitro approaches using cultured gill epithelia, Ussing chamber experiments on gill surrogate membranes, and scanning ion selective electrode techniques (SIET) may also prove useful. Finally, in future studies we advocate for minimum reporting requirements of microplastic properties and experimental conditions to help advance this important emerging field.

The ecological risk and fate of microplastics in the environmental matrices of marine ranching area in coastal water

The debate surrounding "source" and "sink" of microplastics (MPs) in coastal water has persisted for decades. While the transportation of MPs is influenced by surface runoff and currents, the precise transport patterns remain inadequately defined. In this study, the typical coastal habitat - marine ranching in Haizhou Bay (Jiangsu Province, China) were selected as a case study to assess the ecological risk of MPs. An enhanced framework was employed to assess the entire community characteristics of MPs in various environmental compartments, including surface water (SW), middle water (MW), bottom water (BW), sea bottom sediment (SS), and intertidal sediment (IS). The results of the assessment showed a low risk in the water column and a high risk in the sediment. PERMANOVA based on size and polymer of MPs revealed significant differences between IS and other compartments (SW, MW, BW, and SS) (P < 0.001). The co-occurrence network analysis for MP size indicated that most sites occupied central positions, while the analysis for MP polymer suggested that sites near the marine ranching area held more central positions, with sites in MW, BW, and SS being somewhat related to IS. Generalized additive model (GAM) demonstrated that MP concentration in the water correlated with Chla and nutrients, whereas MPs in sediment exhibited greater susceptibility to dissolved oxygen (DO) and salinity. We believe that except for the natural sedimentation and re-suspension of MPs in the vertical direction, MPs in bottom water may migrate to the surface water due to upwelling mediated by artificial reefs. Additionally, under the combined influence of surface runoff, currents, and tides, MPs may migrate horizontally, primarily occurring between middle and bottom water and sediments. The study recommends limiting and reducing wastewater and sewage discharge, as well as regulating fishing and aquaculture activities to control the sources and sinks of MPs in coastal water. Moreover, it advocates the implementation and strengthening of marine monitoring activities to gain a better understanding of the factors driving MP pollution in marine ranching area.

Plastisphere-hosted viruses: A review of interactions, behavior, and effects

Microbial communities, including bacteria, diatoms, and fungi, colonize plastic surfaces, forming biofilms known as the "plastisphere." Recent research has revealed that plastispheres also host a wide range of viruses, sparking interest in microbial ecology and virology. This shared habitat allows viruses to replicate, interact, infect, and spread, potentially impacting the environment and human health. Consequently, viruses attached to microplastics are now recognized to have broad effects on cellular and immune responses. However, the ecology and implications of viruses hosted in plastisphere habitats remain poorly understood, highlighting their fundamental importance as a subject of study. This review explores various pathways for virus attachment to plastispheres, factors influencing these interactions, their impacts within plastisphere and host-associated environments, and associated issues. It also summarizes current research and identifies knowledge gaps. We anticipate that this paper will help improve our predictive understanding of plastisphere viruses in natural settings and emphasizes the need for more research in real-world environments to advance the field.

Unraveling the effect of micro/nanoplastics on the occurrence and horizontal transfer of environmental antibiotic resistance genes: Advances, mechanisms and future prospects

Microplastics can not only serve as vectors of antibiotic resistance genes (ARGs), but also they and even nanoplastics potentially affect the occurrence of ARGs in indigenous environmental microorganisms, which have aroused great concern for the development of antibiotic resistance. This article specifically reviews the effects of micro/nanoplastics (concentration, size, exposure time, chemical additives) and their interactions with other pollutants on environmental ARGs dissemination. The changes of horizontal genes transfer (HGT, i.e., conjugation, transformation and transduction) of ARGs caused by micro/nanoplastics were also summarized. Further, this review systematically sums up the mechanisms of micro/nanoplastics regulating HGT process of ARGs, including reactive oxygen species production, cell membrane permeability, transfer-related genes expression, extracellular polymeric substances production, and ARG donor-recipient adsorption/contaminants adsorption/biofilm formation. The underlying mechanisms in changes of bacterial communities induced by micro/nanoplastics were also discussed as it was an important factor for structuring the profile of ARGs in the actual environment, including causing environmental stress, providing carbon sources, forming biofilms, affecting pollutants distribution and environmental factors. This review contributes to a systematical understanding of the potential risks of antibiotic resistance dissemination caused by micro/nanoplastics and provokes thinking about perspectives for future research and the management of micro/nanoplastics and plastics.

When antibiotics encounter microplastics in aquatic environments: Interaction, combined toxicity, and risk assessments

Antibiotics and microplastics (MPs), known as emerging pollutants, are bound to coexist in aquatic environments due to their widespread distribution and prolonged persistence. To date, few systematic summaries are available for the interaction between MPs and antibiotics in aquatic ecosystems, and a comprehensive reanalysis of their combined toxicity is also needed. Based on the collected published data, we have analyzed the source and distribution of MPs and antibiotics in global aquatic environments, finding their coexistence occurs in a lot of study sites. Accordingly, the presence of MPs can directly alter the environmental behavior of antibiotics. The main influencing factors of interaction between antibiotics and MPs have been summarized in terms of the characteristics of MPs and antibiotics, as well as the environmental factors. Then, we have conducted a meta-analysis to evaluate the combined toxicity of antibiotics and MPs on aquatic organisms and the related toxicity indicators, suggesting a significant adverse effect on algae, and inapparent on fish and daphnia. Finally, the environmental risk assessments for antibiotics and MPs were discussed, but unfortunately the standardized methodology for the risk assessment of MPs is still challenging, let alone assessment for their combined toxicity. This review provides insights into the interactions and environment risks of antibiotics and MPs in the aquatic environment, and suggests perspectives for future research.

The triple exposure nexus of microplastic particles, plastic-associated chemicals, and environmental pollutants from a human health perspective

The presence of microplastics (MPs) is increasing at a dramatic rate globally, posing risks for exposure and subsequent potential adverse effects on human health. Apart from being physical objects, MP particles contain thousands of plastic-associated chemicals (i.e., monomers, chemical additives, and non-intentionally added substances) captured within the polymer matrix. These chemicals are often migrating from MPs and can be found in various environmental matrices and human food chains; increasing the risks for exposure and health effects. In addition to the physical and chemical attributes of MPs, plastic surfaces effectively bind exogenous chemicals, including environmental pollutants (e.g., heavy metals, persistent organic pollutants). Therefore, MPs can act as vectors of environmental pollution across air, drinking water, and food, further amplifying health risks posed by MP exposure. Critically, fragmentation of plastics in the environment increases the risk for interactions with cells, increases the presence of available surfaces to leach plastic-associated chemicals, and adsorb and transfer environmental pollutants. Hence, this review proposes the so-called triple exposure nexus approach to comprehensively map existing knowledge on interconnected health effects of MP particles, plastic-associated chemicals, and environmental pollutants. Based on the available data, there is a large knowledge gap in regard to the interactions and cumulative health effects of the triple exposure nexus. Each component of the triple nexus is known to induce genotoxicity, inflammation, and endocrine disruption, but knowledge about long-term and inter-individual health effects is lacking. Furthermore, MPs are not readily excreted from organisms after ingestion and they have been found accumulated in human blood, cardiac tissue, placenta, etc. Even though the number of studies on MPs-associated health impacts is increasing rapidly, this review underscores that there is a pressing necessity to achieve an integrated assessment of MPs' effects on human health in order to address existing and future knowledge gaps.

eDNA Adsorption onto Microplastics: Impacts of Water Chemistry and Polymer Physiochemical Properties

Adsorption of biomacromolecules onto polymer surfaces, including microplastics (MPs), occurs in multiple environmental compartments, forming an ecocorona. Environmental DNA (eDNA), genetic material shed from organisms, can adsorb onto MPs which can potentially either (1) promote long-range transport of antibiotic resistant genes or (2) serve to gain insights into the transport pathways and origins of MPs by analyzing DNA sequences on MPs. However, little is known about the capacity of MPs to adsorb eDNA or the factors that influence sorption, such as polymer and water chemistries. Here we investigated the adsorption of extracellular linear DNA onto a variety of model MP fragments composed of three of the most environmentally prevalent polymers (polyethylene, polyethylene terephthalate, and polystyrene) in their pristine and photochemically weathered states. Batch adsorption experiments in a variety of water chemistries were complemented with nonlinear modeling to quantify the rate and extent of eDNA sorption. Ionic strength was shown to strongly impact DNA adsorption by reducing or inhibiting electrostatic repulsion. Polyethylene terephthalate exhibited the highest adsorption capacity when normalizing for MP specific surface area, likely due to the presence of ester groups. Kinetics experiments showed fast adsorption (majority adsorbed under 30 min) before eventually reaching equilibrium after 1-2 h. Overall, we demonstrated that DNA quickly binds to MPs, with pseudo-first- and -second-order models describing adsorption kinetics and the Freundlich model describing adsorption isotherms most accurately. These insights into DNA sorption onto MPs show that there is potential for MPs to act as vectors for genetic material of interest, especially considering that particle-bound DNA typically persists longer in the environment than dissolved DNA.

Size effects of microplastics on antibiotic resistome and core microbiome in an urban river

Microplastics (MPs) in aquatic environments provide a new ecological niche that facilitates the attachment of antibiotic-resistance genes (ARGs) and pathogens. However, the effect of particle size on the colonization of antibiotic resistomes and pathogens remains poorly understood. To address this knowledge gap, this study explored the antibiotic resistome and core microbiome on three distinct types of MPs including polyethylene, polypropylene, and polystyrene (PS), with varying sizes of 30, 200, and 3000 μm by metagenomic sequencing. Our finding showed that the ARG abundances of the PS type increased by 4-folds with increasing particle size from 30 to 3000 μm, and significant differences in ARG profiles were found across the three MP types. In addition, the concentrations of ARGs and mobile genetic elements (MGEs) were markedly higher in the MPs than in the surrounding water, indicating their enrichment at these artificial interfaces. Notably, several pathogens such as Pseudomonas aeruginosa, Mycobacterium tuberculosis, and Legionella pneumophila were enriched in MP biofilms, and the co-occurrence of ARGs and virulence factor genes (VFGs)/MGEs suggested the presence of pathogenic antibiotic-resistant microbes with potential mobility. Both redundancy analysis (RDA) and structural equation modeling (SEM) demonstrated that physicochemical properties such as zeta potential, MP size, and contact angle were the most significant contributors to the antibiotic resistome. Strikingly, no significant differences were observed in the health risk scores of the ARG profiles among different sizes and types of MPs. This study expands our knowledge on the impact of MP size on microbial risks, thus enhancing our understanding of the potential health hazards they pose.

Microplastic inhibits the sorption of trichloroethylene on modified biochar

Biochar (BC) was used to remove trichloroethylene (TCE) from soil and water phases, and BC modification changed the sorption behavior of pollutants. Microplastics are emerging pollutants in the soil and water phases. Whether microplastics can affect the sorption of TCE by modified BC is not clear. Thus, batch sorption kinetics and isotherm experiments were conducted to elucidate the sorption of TCE on BC, and BC combined with polyethylene (PE) or polystyrene (PS). The results showed that HCl and NaOH modification increased TCE sorption on BC, while HNO3 modification inhibited TCE sorption on BC. When PE/PS and BC coexisted, the TCE sorption capacity decreased significantly on BC-CK + PE, BC-HCl + PE, BC-HNO3 + PE, BC-NaOH + PE, and BC-NaOH + PS, which was likely due to the preferential sorption of PE/PS on BC samples. We concluded that microplastics can change TCE sorption behavior and inhibit TCE sorption on BC samples. Thus, the interaction of BC and microplastics should be considered when BC is used for TCE removal in soil and water remediation.

A low-cost TICT-based staining agent for identification of microplastics: Theoretical studies and simple, cost-effective smartphone-based fluorescence microscope application

A novel staining agent, (5-(4-(diethylamino)benzylidene)- 1,3-dimethylpyrimidine-2,4,6(1 H,3 H,5 H)-trione) (DDB) was developed for the effective detection of environmentally harmful microplastics. DDB has competitive cost advantages, namely its facile synthesis and high yield, over Nile Red (NR), which is commonly used for microplastic staining. The unique photophysical properties of DDB, including emissive twisted intramolecular charge transfer (TICT) and aggregation-induced emission (AIE), were corroborated via spectroscopic investigations and density functional theory (DFT) calculations. Notably, DDB demonstrated superior selectivity for staining microplastics (polyethylene (PE), polyurethane (PU), polypropylene (PP), polyvinyl chloride (PVC), polystyrene (PS), and polyethylene terephthalate (PET)) over non-plastic materials in water. Furthermore, modulation of the solvent environment during the staining process yielded distinct fluorescence in both the green and red channels for specific types of plastic with the interplay between locally excited (LE) and TICT states. Treatment with 5% ethanol results in the selective staining of PE and PET with the emission of red fluorescence, whereas treatment with 30% ethanol facilitates the selective staining of PU, PVC, and PET with the emission of green fluorescence. Additionally, DDB could selectively stain microplastics in spiked soil and river water samples. Furthermore, a smartphone-based fluorescence microscope was developed at a cost below $100, validating the effective detection of microplastics stained with the newly synthesized DDB. The outcomes of this research demonstrate the potential of DDB as an economical and efficient agent for selective microplastic detection.

Interfacial interactions of polyethylene terephthalate microplastics and malachite green, tetracycline in aqueous environments

Polyethylene terephthalate microplastics (PET-MPs) are one of pivotal nondegradable emerging pollutant. Here the variation of the surface physicochemical characteristics of PET-MPs with UV irradiation aging and the adsorption behaviors of PET-MPs in malachite green (MG), tetracycline (TC) solution and the effect of coexisting Cu(II) were comparatively investigated. The yellowing, weakened hydrophobicity, and increased surface negative charge, crystallinity degree and oxygen-containing functional groups were manifested specifically by the aged PET-MPs. Different from the single system, the hydrophobic interaction and metal ion bridging complexation dominated the adsorption of MG and TC, respectively, in the binary solution. While in the ternary solution, cationic ion competition of Cu(II) with MG decreased its capture, and the formation of PET-Cu(II)-TC ternary complexes promoted TC adsorption. Moreover, PET-MPs could serve as an efficient vector for MG and TC in MG/TC/Cu(II) ternary system, indicating PET-MPs tend to carry more varieties in the complex environment, that may increase the environmental risk of PET-MPs.

Quantification and characterization of microplastics in coastal environments: Insights from laser direct infrared imaging

The study identified and quantified nine plastic polymers frequently detected in the environment by collecting sediment and seawater samples from coastal areas in Auckland, New Zealand. Polymer types, size distributions, and number of microplastics (MPs) were analyzed using a laser direct infrared (LDIR) imaging technique. Compared to conventional spectroscopic or microscopic methods, LDIR enabled capturing and quantifying MPs in much lower size ranges (20-5000 μm). The results demonstrated the widespread occurrence of MPs in the Auckland coastal environment, with polyethylene terephthalate (PET) being the most frequently detected plastic polymer. MP contamination levels ranged from 13 to 83 particles per liter of coastal water and from 1200 to 3400 particles/kg of dry sand in beach sediments. Six additional locations were investigated to assess the contribution of MPs from stormwater drains to the coastal environment. The total count of identified MPs extracted from sediments near stormwater drains reached a maximum of 18,000 particles/kg of dry sand, representing an order of magnitude increase compared to MP levels found in beach sediments at the same location. In contrast to the prevalence of PET and polyamide observed in beach sediments and coastal waters, polyurethane and polyethylene emerged as the predominant plastic polymers in the vicinity of stormwater drain sediments, implying that the variation could potentially stem from distinct sources of plastics. This significant disparity in quality and quantity underscored the potential link between urban runoff and MP pollution in marine ecosystems. A sample preparation method using 100 g sediment samples was developed and used to assess and compare MPs detection in sediment samples. The commonly used 5 g sample method showed higher extraction efficiency and better detection of the most abundant MPs, but the new 100 g method enabled the detection of previously missed, less abundant plastics.

Effects of excess sludge composting process, environmentally persistent free radicals, and microplastics on antibiotics degradation efficiency of aging biochar

Simulation of microbial aging biochar in compost is an important index for evaluating the biochar degradation efficiency of antibiotics. In this study, biochar was prepared by adding microplastics (MPs) to sludge, and the degradation effect of biochar/(peroxymonosulfate, PMS) on antibiotics was evaluated during the compost aging process of biochar. After the compost aging of biochars, the antibiotic degradation efficiency of HPBC500, HPBC500 + polystyrene (PS), HPBC900/PMS, and HPBC900 + PS/PMS decreased by 6.47, 15.2, 10.16, and 10.33 %, respectively. Environmentally persistent free radicals (EPFRs) and defect structure were the main contributors to the activation of PMS. EPFRs produced through PS pyrolysis of biochar exhibited strong reactivity but poor stability during the degradation of antibiotics. Biochar enhanced the growth of microorganisms in compost but reduced its specific surface area. The antibiotic degradation efficiency of the biochar was positively correlated with the concentration of EPFRs. This study elucidated the durability of different biochar toward antibiotic degradation.

Photo-oxidation of Micro- and Nanoplastics: Physical, Chemical, and Biological Effects in Environments

Micro- and nanoplastics (MNPs) are attracting increasing attention due to their persistence and potential ecological risks. This review critically summarizes the effects of photo-oxidation on the physical, chemical, and biological behaviors of MNPs in aquatic and terrestrial environments. The core of this paper explores how photo-oxidation-induced surface property changes in MNPs affect their adsorption toward contaminants, the stability and mobility of MNPs in water and porous media, as well as the transport of pollutants such as organic pollutants (OPs) and heavy metals (HMs). It then reviews the photochemical processes of MNPs with coexisting constituents, highlighting critical factors affecting the photo-oxidation of MNPs, and the contribution of MNPs to the phototransformation of other contaminants. The distinct biological effects and mechanism of aged MNPs are pointed out, in terms of the toxicity to aquatic organisms, biofilm formation, planktonic microbial growth, and soil and sediment microbial community and function. Furthermore, the research gaps and perspectives are put forward, regarding the underlying interaction mechanisms of MNPs with coexisting natural constituents and pollutants under photo-oxidation conditions, the combined effects of photo-oxidation and natural constituents on the fate of MNPs, and the microbiological effect of photoaged MNPs, especially the biotransformation of pollutants.

Alteration of microbial mediated carbon cycle and antibiotic resistance genes during plastisphere formation in coastal area

Microorganisms can attach on the surface of microplastics (MPs) through biological fouling process to form a diverse community called the "plastisphere", which has attracted extensive attention. Although the microbial structure and composition of biofilm have been studied, the knowledge of its microbial function and ecological risk is still limited. In this study, we investigated how the surface properties of MPs affect the biofilm communities and metabolic features under different environmental conditions, and explored the biofilm enrichment of antibiotic resistance genes (ARGs). The results showed that the incubation time, habitat and MPs aging state significantly influenced the structure and composition of biofilm microbial communities, and a small amount of pathogens have been found in the MPs-attached biofilm. The microbial carbon utilization capacity of the biofilm in different incubation habitats varies greatly with highest metabolism capacity appear in the river. The utilization efficiency of different carbon sources is polymer > carbohydrate > amino acid > carboxylic acids > amine/amide, which indicates that the biofilm communities have selectivity between different types of carbon sources. More importantly, ARGs were detected in all the MPs samples and showed a trend of estuary > river > marine. The aged MPs can accumulate more ARGs than the virgin items. In general, MPs in the aquatic environment may become a carrier for pathogens and ARGs to spread to other environment, which may enhance their potential risks to the ecosystem and human health.

Ecotoxicological effects of antibiotic adsorption behavior of microplastics and its management measures

Microplastics adsorb heavy metals and organic pollutants to produce combined pollution. Recently, the adsorption behavior of antibiotics on microplastics has received increasing attention. Exploring the sorption behavior of pollutants on microplastics is an important reference in understanding their ecological and environmental risk studies. In this paper, by reviewing the academic literature in recent years, we clarified the current status of research on the adsorption behavior of antibiotics on microplastics, discussed its potential hazards to ecological environment and human health, and summarized the influence of factors on the adsorption mechanisms. The results show that the adsorption behavior of antibiotics on microplastics is controlled by the physical and chemical properties of antibiotics, microplastics, and water environment. Antibiotics are adsorbed on microplastics through physical and chemical interactions, which include hydrophobic interaction, partitioning, electrostatic interaction, and other non-covalent interactions. Intensity of adsorption between them is mainly determined by their physicochemical properties. The basic physicochemical properties of the aqueous environment (e.g., pH, salinity, ionic strength, soluble organic matter content, and temperature) will affect the physicochemical properties of microplastics and antibiotics (e.g., particle size, state of dispersibility, and morphology), leading to differences in the type and strength of their interactions. This paper work is expected to provide a meaningful perspective for better understanding the potential impacts of antibiotic adsorption behavior of microplastics on aquatic ecology and human health. In the meantime, some indications for future related research are provided.

Micro (nano) plastics uptake, toxicity and detoxification in plants: Challenges and prospects

Plastic pollution has emerged as a global challenge affecting ecosystem health and biodiversity conservation. Terrestrial environments exhibit significantly higher plastic concentrations compared to aquatic systems. Micro/nano plastics (MNPs) have the potential to disrupt soil biology, alter soil properties, and influence soil-borne pathogens and roundworms. However, limited research has explored the presence and impact of MNPs on aquaculture systems. MNPs have been found to inhibit plant and seedling growth and affect gene expression, leading to cytogenotoxicity through increased oxygen radical production. The article discusses the potential phytotoxicity process caused by large-scale microplastics, particularly those unable to penetrate cell pores. It also examines the available data, albeit limited, to assess the potential risks to human health through plant uptake.

Aging characteristics of degradable and non-biodegradable microplastics and their adsorption mechanism for sulfonamides

As emerging pollutants, microplastics (MPs) and antibiotics (ATs) became a research hotspot in recent years. To evaluate the carrier effect of degradable and non-biodegradable MPs in the aquatic environment, the adsorption behaviors of polyamide (PA) and polylactic acid (PLA) towards two sulfonamide antibiotics (SAs) were investigated. Both chemical and photo-aging were used to handle the virgin MPs. Compared with PA, PLA was aged more drastically, showing the obvious grooves, notches and folds. However, due to the higher temperature during chemical aging, the tiny KPLA (PLA aged by K2S2O8) particles were agglomerated and the specific surface area was reduced to nearly 95 %. For PA, the oxidation of chemical aging was stronger than photo-aging. After aging, the hydrophilicity and polarity of MPs increased. In the adsorption experiments, the adsorption capacity of PA towards SAs was 1.7 times higher than that of PLA. Aging process enabled the adsorption capacity of PLA increased 1.22-3.18 times. Overall, the adsorption capacity of sulfamethoxazole (SMX) by both MPs was superior to sulfamerazine (SMR). These results would help to understand the carrier effects and potential ecological risks of MPs towards co-existing contaminants.

Hydrophobic organic contaminants affiliated with polymer-specific microplastics in urban river tributaries and estuaries

Exposure to microplastics (MPs) and hydrophobic organic contaminants (HOCs) combined at high concentrations may induce adverse effects to aquatic organisms in laboratory-scale studies. To determine environmentally relevant concentrations of HOCs in MPs, it is essential to understand the occurrence of MP-affiliated HOCs in the aquatic environment. Here we report the occurrences of HOCs affiliated with polymer-specific floating MPs from 12 tributaries and three estuaries in the Pearl River Delta, South China. Target HOCs include nine synthetic musks (SMs), 14 ultraviolet adsorbents (UVAs), 15 polycyclic aromatic hydrocarbons (PAHs), eight polybrominated diphenyl ethers (PBDEs), and 14 polychlorinated biphenyls (PCBs). Average concentrations of MP-affiliated ∑9SM, ∑14UVA, ∑15PAH, ∑8PBDE, and ∑14PCB were 1790, 5550, 1090, 412, and 107 ng g-1, respectively. The average concentrations of HOCs affiliated with MPs of different polymer types were 9790, 7220, 72,500, and 55,800 ng g-1 for polyethylene (PE), polypropylene, polystyrene, and other MPs, respectively. As the concentration of PE was the highest among all MPs at the average concentration of 0.77 mg m-3, the monthly outflow of PE-affiliated HOCs accounted for the largest proportion (46 %) in the outflow of MP-affiliated HOCs (2.8 g) to the coastal ocean via three estuaries. These results suggest that HOCs were highly concentrated in MPs and varied among different chemicals and polymer types. Due to the differences of polymer characteristics and half-life of affiliated chemicals, future toxicology studies concerning exposure to these combined pollutants may need to specify polymer types and their affiliated chemicals.

Interactions between microplastics and contaminants: A review focusing on the effect of aging process

Microplastics (MPs) in the environment are a major global concern due to their persistent nature and wide distribution. The aging of MPs is influenced by several processes including photodegradation, thermal degradation, biodegradation and mechanical fragmentation, which affect their interaction with contaminants. This comprehensive review aims to summarize the aging process of MPs and the factors that impact their aging, and to discuss the effects of aging on the interaction of MPs with contaminants. A range of characterization methods that can effectively elucidate the mechanistic processes of these interactions are outlined. The rate and extent of MPs aging are influenced by their physicochemical properties and other environmental factors, which ultimately affect the adsorption and aggregation of aged MPs with environmental contaminants. Pollutants such as heavy metals, organic matter and microorganisms have a tendency to accumulate on MPs through adsorption and the interactions between them impact their environmental behavior. Aging enhances the specific surface area and oxygen-containing functional groups of MPs, thereby affecting the mechanism of interaction between MPs and contaminants. To obtain a more comprehensive understanding of how aging affects the interactions, this review also provides an overview of the mechanisms by which MPs interact with contaminants. In the future, there should be further in-depth studies of the potential hazards of aged MPs in different environments e.g., soil, sediment, aquatic environment, and effects of their interaction with environmental pollutants on human health and ecology.

Toxic effects of aging mask microplastics on E. coli and dynamic changes in extracellular polymeric matter

Contamination of disposable medical masks has become a growing problem globally in the wake of Covid-19 due to their widespread use and improper disposal. Three different mask layers, namely the outer layer, the meltblown (MB) filler layer and the inner layers release three different types of microplastics, whose physical and chemical properties change after prolonged environmental weathering. In this study, physical and chemical changes of mask microplastics before and after aging were characterized by different characterization techniques. The toxic effect and mechanism of aged mask microplastics on Escherichia coli (E. coli) were studied by measuring the growth inhibition of mask microplastics, the change in ATPase activity, the change in malondialdehyde content and reactive oxygen species production, and the release of the chemical composition of exopolymeric substances (EPS). The microplastics of the aged MB filter layer had the most significant inhibitory effect on E. coli growth, reaching 19.2 % after 36 h. Also, under the influence of mask microplastics, ATPase activity of E. coli was inhibited and a large amount of EPS was released. The chemical composition of EPS has also changed. This study proposed the possible toxicity mechanism of mask microplastics and the self-protection mechanism of E. coli, and provided a reference for future research on the toxic effects of mask microplastics on environmental organisms.

Microplastics as contaminants in the Brazilian environment: an updated review

Microplastics have long been present in marine and terrestrial environments and have emerged in recent decades as a global environmental concern. This pollutant has been detected with increasing frequency in Brazilian territory and herein primarily highlights current information and developments about the quantity, distribution, techniques of identification, origins, and sources of microplastics and related pollutants in the Brazilian environment. We evaluated 79 publications from 2018 to December 2022, and some aspects can be highlighted: 27% of studies were published in the Journal Marine Pollution Bulletin; 22% of all studies were conducted in São Paulo city; and 52% of all microplastics found were collected from biota followed by sediment samples. According to the findings given here, microplastics in Brazilian habitats, which can reach concentrations of 4367 to 25,794 items m-2 in sediments, are becoming a serious problem in the Anthropocene age, and some topics regarding the open questions in this area were pointed out in this review.

Visual mapping of global nanoplastics research progresses and hotspots: a scientometric assessment analysis

Environmental plastic wastes are continuously degraded into microplastics (MPs) and nanoplastics (NPs); the latter are more potentially harmful to organisms and human health as their smaller size and higher surface-to-volume ratio. Previous reviews on NPs mainly concentrate on specific aspects, such as sources, environmental behavior, and toxicological effects, but few focused on NPs-related scientific publications from a global point of view. Therefore, this bibliometric study aims to summarize the research themes and trends on NPs and also propose potential directions for future inquiry. Related papers were downloaded from the Web of Science Core Collection database on NPs published from 2008 to 2021, and then retrieved information was analyzed using CiteSpace 6.1 R2 and VOSviewer (version 1.6.). Research on NPs mainly involved environmental behaviors, toxicological effects, identification and extraction of NPs, whereas aquatic environments, especially marine systems, attracted more attentions from these scientists compare to terrestrial environments. Furthermore, the adsorption behavior of pollutants by NPs and the toxicological effects of organisms exposed to NPs are the present hotspots, while the regulation of humic acid (HA) on NPs behaviors and the environmental behavior of NPs in freshwater, like rivers and lakes, are the frontier areas of research. This study also explored the possible opportunities and challenges that may be faced in NPs research, which provide a valuable summary and outlook for ongoing NPs-related research, which may be of intrigue and noteworthiness for relevant researchers.

Removal efficiencies of microplastics of the three largest drinking water treatment plants in Bangladesh

Drinking water treatment plants (DWTPs) are intended to provide safe water to the municipality, typically by treating surface waters from rivers, lakes, and streams. Regrettably, all of these water sources for DWTPs have been reported to be contaminated by microplastics (MPs). Hence, there is an urgent need to investigate the removal efficiencies of MPs from raw waters in the conventional DWTPs anticipating public health concerns. In this experiment, MPs in the raw and treated waters of the three major DWTPs of Bangladesh, having different water treatment processes, were evaluated. The concentrations of MPs in the inlet points of Saidabad Water Treatment Plant phase-1 and 2 (SWTP-1 and SWTP-2), which share a similar water source of the Shitalakshya River, were 25.7 ± 9.8 and 26.01 ± 9.8 items L-1. The third plant, Padma Water Treatment Plant (PWTP) utilizes water from the Padma River and had an initial MP concentration of 6.2 ± 1.6 items L-1. The studied DWTPs, with their existing treatment processes, were found to reduce the MP loads substantially. The final MP concentrations in treated waters of SWTP-1, SWTP-2, and PWTP were 0.3 ± 0.03, 0.4 ± 0.01, and 0.05 ± 0.02 items L-1 with the removal efficiencies of 98.8, 98.5, and 99.2 %, respectively. The considered size range of MP was 20 μm to <5000. Fragments and fibers were the two predominant MP shapes. In terms of polymer, the MPs were polypropylene (PP, 48 %), polyethylene (PE, 35 %), polyethylene terephthalate (PET, 11 %), and polystyrene (PS, 6 %). The field emission scanning electron microscopy-energy dispersive X-ray spectroscopy (FESEM-EDX) revealed the fractured and rough surfaces of the remaining MPs, which were also found to be contaminated with heavy metals, like lead (Pb), cadmium (Cd), chromium (Cr), arsenic (As), copper (Cu), and zinc (Zn). Hence, additional initiatives are required to remove the residual MPs from the treated waters to safeguard the city dwellers from potential hazards.

Eco-Corona Formation on Plastics: Adsorption of Dissolved Organic Matter to Pristine and Photochemically Weathered Polymer Surfaces

Plastic fate in freshwater systems is dependent on particle size, morphology, and physicochemical surface properties (e.g., charge, surface roughness, and hydrophobicity). Environmental aging processes, such as photochemical weathering and eco-corona formation due to dissolved organic matter (DOM) adsorption on plastic surfaces, can alter their physicochemical properties, affecting fate and transport. While plastic aging has been studied from a materials science perspective, its specific implications in environmental contexts remain less understood. Although photochemical weathering and eco-corona formation occur simultaneously in the environment, in this work, we systematically assessed the effects of photochemical weathering on the physicochemical properties of polymers (polyethylene, polypropylene, polyethylene terephthalate, and polystyrene) and how this influences the adsorption of DOMs (Suwannee River humic acid, fulvic acid, and natural organic matter) relative to pristine polymers. Pristine polymers initially had different and distinct physicochemical surface properties, but upon aging, they became more similar in terms of surface properties. Photochemical weathering resulted in a decrease in polymer film thickness, an increase in surface roughness, and hydrophilicity. DOM adlayers on the polymer surfaces resulted in more comparable wettability, effectively masking the initial polymer properties. Collectively, this study explores the physiochemical changes polymers undergo in laboratory studies mimicking environmental conditions. Understanding these changes is the initial step to rationalizing and predicting processes and interactions such as heteroaggregation that dictate the fate of plastics in the environment.

The bioaccessibility of adsorped heavy metals on biofilm-coated microplastics and their implication for the progression of neurodegenerative diseases

Microplastic (MP) tiny fragments (< 5 mm) of conventional and specialized industrial polymers are persistent and ubiquitous in both aquatic and terrestrial ecosystem. Breathing, ingestion, consumption of food stuffs, potable water, and skin are possible routes of MP exposure that pose potential human health risk. Various microorganisms including bacteria, cyanobacteria, and microalgae rapidly colonized on MP surfaces which initiate biofilm formation. It gradually changed the MP surface chemistry and polymer properties that attract environmental metals. Physicochemical and environmental parameters like polymer type, dissolved organic matter (DOM), pH, salinity, ion concentrations, and microbial community compositions regulate metal adsorption on MP biofilm surface. A set of highly conserved proteins tightly regulates metal uptake, subcellular distribution, storage, and transport to maintain cellular homeostasis. Exposure of metal-MP biofilm can disrupt that cellular homeostasis to induce toxicities. Imbalances in metal concentrations therefore led to neuronal network dysfunction, ROS, mitochondrial damage in diseases like Alzheimer's disease (AD), Parkinson's disease (PD), and Prion disorder. This review focuses on the biofilm development on MP surfaces, factors controlling the growth of MP biofilm which triggered metal accumulation to induce neurotoxicological consequences in human body and stategies to reestablish the homeostasis. Thus, the present study gives a new approach on the health risks of heavy metals associated with MP biofilm in which biofilms trigger metal accumulation and MPs serve as a vector for those accumulated metals causing metal dysbiosis in human body.

Osmoregulatory responses in the neotropical fish species Astyanax lacustris, exposed to single and combined microplastics, polycyclic aromatic hydrocarbons, and their mixture

Microplastic (MP) pollution poses a significant environmental threat. These MPs can adsorb toxic compounds such as polycyclic aromatic hydrocarbons (PAH), which are highly lipophilic and carcinogenic. To assess the potential effects of virgin MP, PAH, and MP+PAH in association with osmoregulation and energetic substrate, we conducted experiments with the tetra cardinal Astyanax lacustris. The environmentally relevant concentration of MP (10 mg L-1) and 20 % of the LC50-96 h of crude oil for A. lacustris (2.28 µg L-1) were used during the 96-h exposure. Fish were exposed to virgin MP, PAH, MPC (MP loaded with PAH), PAH+MP (PAH and MP in association), and the control without (CT) and with handling (CH). After 96 h, blood was collected for osmoregulatory parameters (plasma osmolality; Na+, K+, Cl-, Mg2+; glycose and lactate); gills for osmoregulatory enzyme activities (Na+, K+ ATPase, H+ ATPase, and carbonic anhydrase); and white muscle samples were used to determine glycogen as an energetic substrate. The low molecular weight PAH was not detected in PAH-loaded MP (MPC) and PAH in combination with MP (PAH+MP). The PAH concentration of the MPC and PAH+MP was similar and low compared to other works. Virgin MP, PAH, MPC, and PAH+MP were able to cause muscle glycogen depletion. The activity of v-type H+ ATPase and plasma Na+ concentrations were lower in PAH with MP (MPC). However, the hydromineral balance (K+, Mg2+, Cl-, and osmolality) was not affected by any treatment. In this sense, we can conclude that the MPC caused osmoregulatory disturbances not seen in the MP associated with PAH (MP+PAH). However, this seems unrelated to the PAH leaking from the MPC or the PAH absorption to the virgin MP once the PAH concentrations from the MPC and PAH+MP were similar.

Optimizing Moss and Lichen Transplants as Biomonitors of Airborne Anthropogenic Microfibers

Anthropogenic microfibers (mfs) are synthetic particles composed of cellulose (cotton, rayon, acetate, etc.) or petrochemical-based polymers (i.e., microplastics-MPs) that are less than 5 mm in length. The accumulation of mfs, including MPs, in the moss Hypnum cupressiforme and the lichen Pseudevernia furfuracea was compared in a transplant experiment lasting 6 weeks. We also tested the effects of the bag used for transplants on the accumulation of mfs. Anthropogenic particles trapped by both biomonitors were mostly filamentous (99% mfs), and their number was overall higher in the moss (mean ± s.d. 102 ± 24) than in the lichen (mean ± s.d. 87 ± 17), at parity of sample weight. On average, mfs found in lichen were significantly longer than those found in moss bags, suggesting that lichens are less efficient at retaining smaller mfs. Exposure without the net yielded a higher mfs number accumulation in both species, indicating that "naked" transplants provide greater sensitivity. The calculation of daily fluxes evidenced a loss of mfs in the lichen, suggesting the presence of more stable bonds between moss and mfs. Raman microspectroscopy carried out on about 100 debris confirms the anthropogenic nature of mfs, of which 20% were MPs. Overall results indicate that moss is preferable to lichen in the biomonitoring of airborne mfs especially when exposed naked.

Evaluation of microplastic pollution in a lotic ecosystem and its ecological risk

This study investigates the microplastics (MPs) pollution in Tigris River, assessing spatial and temporal variations in water and sediment. MPs presence was high during both seasons 3429.2 MPs/m3 (dry season) and 3363.2 MPs/m3 (wet season) in water, and 121.2 MPs/kg (wet season) and 123.2 MPs/kg (dry season) in sediment. MPs morphology mostly consisted of fibers and fragments, with sizes below 0.5 mm. Transparent and white were the most common colors, and they were primarily composed of polyethylene (PE) and polypropylene (PP). Ecological risk assessment, using the plastic hazard index (PHI), pollution load index (PLI), and potential ecological risk index (PERI), categorized the risk from danger to extreme danger based on PHI, while PLI and PERI indicated a minor risk. These findings provide initial evidence of microplastics pollution in the Tigris River's water and sediment, emphasizing the need for action by decision-makers to mitigate these risks.

Mitigating airborne microplastics pollution from perspectives of precipitation and underlying surface types

The issue of airborne microplastics (AMPs) pollution is receiving increasing attention, but effective solutions are still limited. In this study, AMPs were collected in pairs from an open space and under a tree (Ficus virens) in the suburb of Chengdu, southwest China, to investigate the current pollution status. The meteorological factors and underlying surface types were analyzed to investigate whether these factors could influence and mitigate the pollution of AMPs. The results showed that the fibrous AMPs accounted for the vast majority and the dominant polymers were polypropylene-polyethylene (PP-PE) and polypropylene (PP), with an average deposition flux of AMPs of 192 n/m2/d (22.41 µg/m2/d). Rainfall was found to have the prolonged scavenging efficiency for AMPs, which could extend to 8 to 48 hours after the end of rainfall, and this is a new insight into the relationship with meteorological factors. Interactions between the key underlying surface types and AMPs were also studied. The representative tree species (Ficus virens) had a low interception rate of 6.25% for AMPs and retained mainly small-sized AMPs and more fibers. The masses of AMPs loaded into Chengdu rivers could reach 1149 kg annually, with the unit mass load of 13.6 kg/km2 in urban rivers and 8.2 kg/km2 in suburban rivers. The masses intercepted by trees and bushes throughout the city only offset the masses loading in rivers, and open or sparse buildings were found to be sensitive areas for AMPs, which indicated the urgent need to control and mitigate the pollution of AMPs, especially in these sensitive areas. This work comprehensively analyzed the AMPs pollution from various perspectives and attempted to find ways to mitigate this pollution.

From waste to resource: Metagenomics uncovers the molecular ecological resources for plastic degradation in estuaries of South China

Estuaries are hotspots of plastic pollution due to accumulated waste from surrounding rivers and coasts. However, the molecular ecological resources that possess plastic-degrading traits and their biogeographic distributions in estuarine waters remain to be elucidated. In this study, we mapped the distribution profiles of plastic-degrading genes (PDGs) in 30 subtropical estuaries in China based on metagenomic sequencing. A total of 41 PDG subtypes were observed in these estuaries. The Pearl River Estuary had higher diversity and abundance of PDGs than the east and west region estuaries. Genes for degrading synthetic heterochain and natural plastics were the most diverse and abundant types, respectively. The abundance of synthetic PDGs was significantly higher in estuaries affected by intense anthropogenic activities. Further binning strategies revealed diverse microbes with plastic-degrading ability in these estuaries. Rhodobacteraceae, a dominant plastic-degrading bacterial family, primarily carried PDGs for degrading natural plastics. Pseudomonas veronii carrying diverse PDGs was identified, which may be of value for further technical improvement of plastic degradation. In addition, phylogenetic and structural analyses of 19 putative 3HV dehydrogenases, the most diverse and abundant DPGs, showed inconsistent evolution with their hosts, but different sequences were conserved with consistent key functional amino acids. A potential biodegradation pathway for polyhydroxybutyrate by Rhodobacteraceae was proposed. The result implied that plastic-degrading functions are widely distributed in estuarine waters and metagenomics could be used as a promising screening tool for large-scale profiling of plastic-degrading potential in the natural environment. Our findings have important implications and provide potential molecular ecological resources for developing plastic waste removal technologies.

Use of a Dual-Labeled Bioaccumulation Method to Quantify Microplastic Vector Effects for Hydrophobic Organic Contaminants in Soil

Although in vitro simulation and in vivo feeding experiments are commonly used to evaluate the carrier role of microplastics in the bioaccumulation of toxic chemicals, there is no direct method for quantitatively determining their vector effect. In this study, we propose a dual-labeled method based on spiking unlabeled hydrophobic organic contaminants (HOCs) into soils and spiking their respective isotope-labeled reference compounds into microplastic particles. The bioaccumulation of the unlabeled and isotope-labeled HOCs in Eisenia fetida earthworms was compared. Earthworms can assimilate both unlabeled and isotope-labeled HOCs via three routes: dermal uptake, soil ingestion, and microplastic ingestion. After 28 days of exposure, the relative fractions of bioaccumulated isotope-labeled HOCs in the soil treated with 1% microplastics ranged from 15.5 to 55.8%, which were 2.9-47.6 times higher than those in the soils treated with 0.1% microplastics. Polyethylene microplastics were observed to have higher relative fractions of bioaccumulated isotope-labeled HOCs, potentially because of their surface hydrophobicity and amorphous rubbery state. The general linear models suggested that the vector effects were mainly due to the microplastic concentration, followed by polymer properties and HOC hydrophobicity. This proposed method and the derived empirical formula contribute to a more comprehensive understanding of the vector effects of microplastics for HOC bioaccumulation.

Species sensitivity distributions of micro- and nanoplastics in soil based on particle characteristics

Micro- and nanoplastics are released into the soil through various anthropogenic activities; however, research on ecological risk assessment (ERA) of soil microplastics is limited. In this study, the species sensitivity distributions (SSDs) of representative groups of soil biota were analyzed to determine their sensitivity to microplastic properties. A total of 411 datasets from apical endpoint data within 74 studies were classified and utilized in SSD estimation. The hazardous concentrations for 5% of species for microplastics was 88.18 (40.71-191.00) mg/kg soil. It has been established that small-sized microplastics are more toxic to soil organisms than larger microplastics. Most microplastics were spherical and polystyrene, exhibiting the most adverse effects among all the microplastic types assessed herein. The results suggest that physical characteristics of microplastics are important toxicity determinants in soil ecosystems. Given the potential for adverse environmental effects, further effective management strategies should urgently be employed in these areas. This study provided an integrated perspective of microplastic ecotoxicity in soil. In addition, SSDs were estimated using larger datasets and for more species than in previous studies. This is the first study to consider microplastic properties for estimating SSD.

Sources, distribution, and environmental effects of microplastics: a systematic review

Microplastics (MPs) are receiving increasing attention from researchers. They are environmental pollutants that do not degrade easily, are retained for prolonged periods in environmental media such as water and sediments, and are known to accumulate in aquatic organisms. The aim of this review is to show and discuss the transport and effects of microplastics in the environment. We systematically and critically review 91 articles in the field of sources, distribution, and environmental behavior of microplastics. We conclude that the spread of plastic pollution is related to a myriad of processes and that both primary and secondary MPs are prevalent in the environment. Rivers have been indicated as major pathways for the transport of MPs from terrestrial areas into the ocean, and atmospheric circulation may be an important avenue for transporting MPs between environmental compartments. Additionally, the vector effect of MPs can change the original environmental behavior of other pollutants, leading to severe compound toxicity. Further in-depth studies on the distribution and chemical and biological interactions of MPs are highly suggested to improve our understanding of how MPs behave in the environment.

Effects of microplastics on the toxicity of co-existing pollutants to fish: A meta-analysis

Aquatic ecosystems are among the main destination for microplastics (MPs) in the environment. MPs that enter aquatic ecosystems can contribute to pollution together with other co-existing pollutants. However, whether such pollution results in higher or lower toxicity to fish than that caused by co-existing pollutants alone remains controversial. This study aimed at closing this research gap based on 1380 biological endpoints under the background of environmental MP concentrations collected from 55 laboratory studies. Overall, MPs in co-existing pollutant solutions significantly increased the toxicity to fish. Specifically, MPs elevated negative effects on the immune system, metabolism, and oxidative damage. Subgroup analysis indicated that changes in toxicity were related to fish life stage and MP size, but not to co-existing pollutant or MP type. Meta-regression analysis indicated that changes in toxicity were not related to the logarithm of the octanol-water partition coefficient (logKow) or exposure time. Finally, the differences between laboratory research and the actual aquatic environment were discussed from four aspects: MPs, co-existing pollutants, environmental factors, and experimental objects. Our study provides a basis for further understanding the potential impact of MPs on aquatic organisms from a combined pollution perspective. Moreover, our results can provide a reference for the conservation and management of aquatic ecosystems.

Microplastics as vectors of chemical contaminants and biological agents in freshwater ecosystems: Current knowledge status and future perspectives

Microplastics (MPs) are becoming ubiquitous, and their environmental fate is becoming an issue of concern. Our review aims to synthesize current knowledge status and provide future perspectives regarding the vector effect of MPs for chemical contaminants and biological agents. The evidence in the literature indicates that MPs are a vector for persistent organic pollutants (POPs), metals and pharmaceuticals. Concentrations of chemical contaminant in orders of six-fold higher on MPs surfaces than in the surrounding environmental waters have been reported. Chemical pollutants such as perfluoroalkyl substances (PAFSs), hexachlorocyclohexane (HCHs) and polycyclic aromatic hydrocarbons (PAHs), exhibiting polarities in the range of 3.3-9 are the commonest chemicals reported on MP surfaces. Regarding metals on MPs including chromium (Cr), lead (Pb), cobalt (Co), the presence of C-O and N-H in MPs promote a relatively high adsorption of these metals onto MP surfaces. Regarding pharmaceuticals, not much has been done, but a few studies indicate that commonly used drugs such as ibuprofen, ibuprofen, diclofenac, and naproxen have been associated with MPs. There is sufficient evidence supporting the claim that MPs can act as vectors for viruses, bacterial and antibiotic-resistant bacteria and genes, and MPs act to accelerate horizontal and vertical gene transfer. An area that deserves urgent attention is whether MPs can act as vectors for invertebrates and vertebrates, mainly non-native, invasive freshwater species. Despite the ecological significance of invasive biology, little research has been done in this regard. Overall, our review summarises the state of the current knowledge, identifies critical research gaps and provides perspectives for future research.