An overview on engineering the surface area and porosity of biochar

Progress of 0D Biomass-Derived Porous Carbon Materials Produced by Hydrothermal Assisted Synthesis for Advanced Supercapacitors

Supercapacitors are garnering considerable interest owing to their high-power density, rapid charge-discharge capability, and long cycle life. Among the various materials explored, biomass-derived carbon nanomaterials stands out as a sustainable and cost-effective choice, thanks to its natural abundance and eco-friendly characteristics. This review delineates recent advances in the synthesis of zero-dimensional (0D) carbon nanomateirlas from various biomass precursors via hydrothermal assisted synthesis. It offers a comprehensive discussion on the factors affecting the synthesis of 0D carbon nanomaterials, including precursor type, concentration, reaction temperature, and time. Furthermore, the review underscores the impact of different activation methods on the morphology and electrochemical performance of 0D carbon nanomaterials. Finally, we outline the challenges and future prospects of utilizing biomass-derived carbon nanomaterials in supercapacitor applications, emphasizing the importance of optimizing synthesis parameters to attain the desired material properties.

Recent advances in valorization of lignocellulosic waste into biochar and its functionalization for the removal of chromium ions

Lignocellulosic waste is a prevalent byproduct of agricultural and forestry activities which is an excellent feedstock for the preparation of biochar. This research area is of interest to the scientific community due to its potential in environmental remediation. In this regard, this review examines the latest advancements in transforming lignocellulosic waste into biochar and explores recent innovations in enhancing its functionality for chromium ion removal. It gives analysis on current methods for biochar production from lignocellulosic materials such as pyrolysis. Additionally focusing on improvements in production efficiency, structural properties, and surface modifications. The review also highlights various functionalization techniques, such as chemical activation and impregnation with metal oxides, that were innovated to improve adsorptive nature of biochar for chromium ions. While progress has been made, achieving scalability in lignocellulosic biochar production presents challenges, such as the high energy demands of pyrolysis, inconsistencies in feedstock quality, and the need for cost-effective functionalization methods. By summarizing recent research and technological progress, this paper aims to offer a clear perspective on the effectiveness of biochar derived from lignocellulosic waste in addressing contamination. Additionally, it discusses the ongoing challenges and future research directions needed to optimize biochar applications in environmental cleanup.

Development of novel biochar adsorbent using agricultural waste biomass for enhanced removal of ciprofloxacin from water: Insights into the isotherm, kinetics, and thermodynamic analysis

Increase in the antibiotic's usage and mis-management in antibiotics' disposal has led to the occurrence of antibiotic residues in the surface water bodies. These residues may pose considerable risks to the human as well as aquatic organisms owing to the enhancement in antimicrobial resistance among microbes. Hence, precautionary measures are need of the hour to curtail the occurrence of antibiotic compounds in water. In addition, rampant burning of agricultural waste in India causes considerable air pollution. Considering this, a novel adsorbent has been developed from agricultural waste biomass, viz. wheat straw (WS), through calcination (CWS), followed by chemical activation (AWS). These adsorbents were employed for the removal of ciprofloxacin (CIP) from water. Removal efficiency of 90% (for CWS) and 98% (for AWS) could be achieved at neutral pH in room temperature conditions. The maximum adsorption capacity of ciprofloxacin on synthesized adsorbent was evaluated as 14.51 mg g-1. Experimental findings were further explored to get the insights of isotherm, kinetics, and thermodynamics involved in the process. It was found that Langmuir model (with R2 value of 0.985) provided a better fit than the other isotherm models. Kinetics and thermodynamic studies revealed that adsorption process followed the pseudo second order linear kinetic model (with R2 value of 0.999) with endothermic and spontaneous sorption of ciprofloxacin on developed adsorbent. Thus, wheat straw waste may suitably be used as adsorbent for the removal of antibiotics from water.

Spent Mushroom Substrate-Derived Biochar and Its Applications in Modern Agricultural Systems: An Extensive Overview

Spent mushroom substrate (SMS), a nutrient-dense byproduct of mushroom cultivation, has emerged as a promising feedstock for biochar production, offering a sustainable solution to modern agricultural and environmental challenges. This review explores SMS properties, its conversion into biochar, and its various applications. Due to its lignocellulosic structure, high organic matter (OM), and essential nutrients, SMS is ideal for pyrolysis, a process that enhances biochar's porosity, nutrient retention, and carbon stability. These properties improve soil fertility, water retention, microbial activity, and plant growth while also contributing to climate change mitigation through carbon sequestration. SMS-derived biochar stands out for its superior benefits, including a balanced pH, a rich nutrient profile, and the ability to adsorb heavy metals, which mitigates soil and water contamination and minimizes toxic risks in the food chain. By enhancing soil structure, nutrient cycling, and moisture retention, SMS-derived biochar supports sustainable farming practices that reduce chemical fertilizer use and boost climate resilience. Beyond soil applications, SMS-derived biochar is effective in wastewater treatment, mitigating plant diseases, and improving mushroom cultivation substrates, thereby enhancing mycelial growth and productivity. Economically, it is a cost-effective alternative due to the abundant availability and inexpensive nature of SMS. Nevertheless, challenges still exist, particularly in optimizing production methods and ensuring consistency in biochar properties, influenced by variations in pyrolysis conditions and SMS types. Advances in production technology and sustainable practices are vital for scaling up SMS-derived biochar production. This paper emphasizes the transformative potential of SMS-derived biochar, advocating for its integration into circular economy frameworks and sustainable agricultural systems. Recommendations for future research and policy support are provided to maximize the ecological and economic benefits of SMS-derived biochar, fostering its widespread adoption in global agricultural and environmental strategies.

Non-reactive biochar and Bacillus pumilus RSB17-based healing powder: A sustainable solution for enhanced bacterial viability in self-healing mortar

Existing mortar uses self-healing powders that are based on mineral admixtures, whose reactive nature negatively impacts bacterial viability and diminishes their effectiveness over time. This study aims to develop non-reactive, sustainable biochar-based healing powders with extended bacterial viability to serve as self-healing admixture in bio-mortar. Biochar from coconut husk, coconut shell, and coconut leaf petiole was evaluated for compatibility with Bacillus pumilus RSB17, emphasizing bacterial growth and calcium carbonate precipitation. Coconut shell biochar demonstrated superior performance and was used to formulate a microbial biochar healing powder. Another healing powder was prepared by lyophilizing the bacterial spore solution without protectants. The shelf life was evaluated for 180 days at 4 °C and 25 °C, demonstrating that microbial biochar healing powder at 4 °C maintained bacterial viability above the 4.5 log CFU/g threshold necessary for effective calcium carbonate precipitation, while lyophilized spore powder stored at 25 °C dropped below the threshold at 90 days. Microbial biochar healing powder stored at 4 °C for 180 days was integrated into the mortar, which healed crack width up to 0.80 mm at 56 days under submerged rainwater maintained at 27 °C ± 2 °C and 85 % ± 5 % relative humidity. Electrical resistivity decreased from 28.16 Ω·m to 21.35 Ω·m, the permeability coefficient dropped from 153.90 mm/s to 0 mm/s, and compressive strength regained 90.53 %, which collectively indicated enhanced self-healing. Microstructural analysis confirmed the stable cuboid calcite crystals with a crystallite size of 86.62 nm. Thus, Microbial biochar healing powder produced from coconut shell biochar and Bacillus pumilus RSB17 and stored at 4 °C is an effective self-healing admixture for bio-mortar applications with a minimum storage period of 180 days.

Investigation of adsorption parameters of saxitoxin onto loblolly pine-derived biochar synthesized at various pyrolysis temperature

This study highlights the use of loblolly pine derived biochar for the removal of harmful algal bloom toxin, Saxitoxin (STX), from water. Biochar samples were prepared at varying pyrolysis temperatures (400, 600 and 800 °C) for 60 min. As pyrolysis temperature increases, enhancement in surface porosity was observed (SBET = 7.26 ± 0.2 m2/g to 408.15 ± 6.19 m2/g) while a decline in oxygen-containing functional groups was observed (1517.80 ± 14.98 μmol/g to 823.01 ± 7.72 μmol/g). This study aimed to discover the effects of adsorption parameters such as biochar dosage amount, contact time, initial concentration and initial pH on Saxitoxin adsorption. These studies revealed impressive results with >90 % toxin removal with dosage rate of 0.01 g/L, contact time of 30 min, and increasing percent removal with increasing initial STX concentration and initial pH in water. Maximum uptake was calculated for P400 with adsorption capacity of 314.37 μg/g. This showed that surface functionality showed higher affinity for STX uptake, which may be possible due to hydrogen bonding, electrostatic interactions, ion-exchange, and π-π interactions. Applied kinetic models indicated both physisorption and chemisorption interactions with best fit supporting the Elovich models. Complementary, adsorption isotherm analysis confirmed the multilayer adsorption behavior of the Freundlich model. Therefore, these findings support the viable use of biochar material for the remediation of STX waters.

Novel MOF-based vanadium and 2,2 -bipyridine-4,4 -dicarboxylic acid as phenomenal dye adsorbent and antimicrobial agent

In this study, a new MOF (metal-organic framework) based on vanadium and 2,2-bipyridine-4,4-dicarboxylic acid (V/BP-MOF) was synthesized. Synthesized V/BP-MOF was introduced as a strong adsorbent of Congo Red (CR) and an effective agent in eliminating microbial species. In the investigation of CR absorption activity, several factors such as concentration of V/BP-MOF, pH, time, and temperature were investigated. Antimicrobial evaluations were carried out on Common bacterial strains in wastewater and values of MIC (minimum inhibitory concentration) and MBC (Minimum Bactericidal Concentration) were reported. The V/BP-MOF was confirmed and characterized by EA, EDS, EDS mapping, FT-IR, XRD, TGA, BET, SEM, and TEM. In checking the characteristics of V/BP-MOF, size, specific surface area, and thermal stability were obtained, respectively, 68 nm, 325 m2/g, and 320°C. The highest adsorption of CR, at 94%, was obtained at natural pH, ambient temperature, and after 150 min. In kinetic studies, a correlation coefficient of 0.99 was observed with the pseudo-second-order kinetic model, while in isotherm studies, a correlation coefficient of 0.97 was observed with the Freundlich isotherm model. In the biological evaluations, the best inhibition was against Escherichia coli, and MIC and MBC were observed as 4 μg/mL and 2 μg/mL, respectively. As a general result, V/BP-MOF can be introduced as a potent absorbent agent of CR dye and antimicrobial properties. Therefore, the compound synthesized in this study can be introduced as a suitable option for the wastewater treatment industry, with multiple capabilities including the removal of chemical pollutants and pathogenic agents.

Advancing modified biochar for sustainable agriculture: a comprehensive review on characterization, analysis, and soil performance

Biochar is a carbon-rich material produced through the pyrolysis of various feedstocks. It can be further modified to enhance its properties and is referred to as modified biochar (MB). The research interest in MB application in soil has been on the surge over the past decade. However, the potential benefits of MB are considerable, and its efficiency can be subject to various influencing factors. For instance, unknown physicochemical characteristics, outdated analytical techniques, and a limited understanding of soil factors that could impact its effectiveness after application. This paper reviewed the recent literature pertaining to MB and its evolved physicochemical characteristics to provide a comprehensive understanding beyond synthesis techniques. These include surface area, porosity, alkalinity, pH, elemental composition, and functional groups. Furthermore, it explored innovative analytical methods for characterizing these properties and evaluating their effectiveness in soil applications. In addition to exploring the potential benefits and limitations of utilizing MB as a soil amendment, this article delved into the soil factors that influence its efficacy, along with the latest research findings and advancements in MB technology. Overall, this study will facilitate the synthesis of current knowledge and the identification of gaps in our understanding of MB.

Graphical Abstract

Synchronous control of nitrogen and phosphorus release from sediments in shallow lakes under wind disturbance by modified zeolite and Ca/Al-based sludge combination

To inhibit eutrophication caused by endogenous pollutants release, the experiment explored the efficiency and mechanism of the synchronous control of nitrogen (N) and phosphorus (P) release from sediments in shallow lakes under wind disturbance by modified Ca/Al-based sludge (MS) and modified zeolite (MZ). High-temperature calcination and NaCl impregnation increased the pore volume of MS and Na+ content of MZ, and the adsorption capacity of MS for PO43--P and MZ for NH4+-N was as high as 42.01 and 20.28 mg g-1. The results of a 90-day incubation experiment showed that the addition of MS and MZ increased the abundance of Thauera, Nitrospira, Denitratisoma, and Clostridium, while decreasing the proportion of Proteus Hauser and Saccharimonadales, thereby reducing the active N and P contents in sediments through microbial transformation. At the same time, the efficient adsorption performance of the MS and MZ resulted in a significant decrease in pollutants in the interstitial water and sediments. In addition, sediment resuspension caused by wind disturbance increased the contact between sediments and remediation agents, resulting in the action depth of covering materials exceeding 100 mm. Compared to adding MS or MZ alone, the combination of the two (MSZG) could synchronously, efficiently, and stably inhibit N and P release. Under the coupling effects of physical interception, physicochemical adsorption, and biotransformation, the average TN, NH4+-N, TP, and PO43--P in the overlying water of the MSZG decreased by 72.13%, 88.92%, 69.28%, and 81.26%, respectively, compared to Control, which satisfying the Class III standard for surface water. Therefore, this study could provide reference for controlling endogenous release, improving eutrophication in shallow lakes under wind disturbance, and recycling residual sludge from sewage plants.

Biochar in the Remediation of Organic Pollutants in Water: A Review of Polycyclic Aromatic Hydrocarbon and Pesticide Removal

This review explores biochar's potential as a sustainable and cost-effective solution for remediating organic pollutants, particularly polycyclic aromatic hydrocarbons (PAHs) and pesticides, in water. Biochar, a carbon-rich material produced from biomass pyrolysis, has demonstrated adsorption efficiencies exceeding 90% under optimal conditions, depending on the feedstock type, pyrolysis temperature, and functionalization. High surface area (up to 1500 m2/g), porosity, and modifiable surface functional groups make biochar effective in adsorbing a wide range of contaminants, including toxic metals, organic pollutants, and nutrients. Recent advancements in biochar production, such as chemical activation and post-treatment modifications, have enhanced adsorption capacities, with engineered biochar achieving superior performance in treating industrial, municipal, and agricultural effluents. However, scaling up biochar applications from laboratory research to field-scale wastewater treatment poses significant challenges. These include inconsistencies in adsorption performance under variable environmental conditions, the high cost of large-scale biochar production, logistical challenges in handling and deploying biochar at scale, and the need for integration with existing treatment systems. Such challenges impact the practical implementation of biochar-based remediation technologies, requiring further investigation into cost-effective production methods, long-term performance assessments, and field-level optimization strategies. This review underscores the importance of addressing these barriers and highlights biochar's potential to offer a sustainable, environmentally friendly, and economically viable solution for large-scale wastewater treatment.

Engineered biochar for in-situ and ex-situ remediation of contaminants from soil and water

Tailoring physical and chemical properties of biochar enhances its selectivity, treatability, and efficiency in contaminant remediation. Thus, engineered biochar has emerged as a promising remedy for both in-situ and ex-situ remediation of polluted soil and water. Several factors influence the effectiveness of engineered biochar, including feedstock sources, pyrolysis conditions, surface functionalization, mode of application, and site characteristics. The advantages and disadvantages of different modification approaches to engineered biochar and their specific treatability for in-situ and ex-situ remediation are obscure and must be adequately addressed. This review critically evaluates the application of engineered biochar for on/off-spot contamination management, taking into account the long-term stability and biocompatibility prospects. The properties of engineered biochar resulting from modification with clay minerals, nanoparticles, polymers, surfactants, and oxidants/reductants were critically reviewed. Recent progress and advances in remediation mechanisms and modes of application were elaborated for the effective removal of organic and inorganic contaminants, including heavy metals, pesticides, dyes, polycyclic aromatic hydrocarbons, per- and poly-fluoroalkyl substances, and agrochemicals. Several crucial parameters influence in-situ remediation, including the distribution of contaminants, background electrolytes, hydraulic conductivity, as well as dispersion and stability of adsorbents. Ex-situ remediation of pollutants relies heavily on adsorption or degradation kinetics, background electrolytes, adsorbent dose, and pollutant concentrations. In addition, factors restricting the application of engineered biochar were highlighted for long-term sustainable contaminant management and maintaining low environmental impact. Finally, the challenges and future perspectives of utilizing engineered biochar for field-scale demonstration of contaminated sites are proposed.

Mechanistic insights into adsorption-desorption of PFOA on biochars: Effects of biomass feedstock and pyrolysis temperature, and implication of desorption hysteresis

Adsorptive removal of the emerging organic pollutant perfluorooctanoic acid (PFOA) from contaminated water using biochar is a promising cost-effective approach. To determine the stability of PFOA adsorption on biochar, the thermodynamic analysis of the adsorption-desorption behavior is essential. This study comprehensively investigated the adsorption and desorption of PFOA on biochars derived from maple sawdust, peanut shells and corn stalks, pyrolyzed at peak temperatures of 400, 600 and 800 °C. The findings indicated that the micropore volume of the biochars was key to PFOA adsorption, with peanut shell biochar produced at 800 °C showing the highest adsorption capacity of 16.75 mg/g, attributed to its larger micropore volume (0.22 m3/g). Thermodynamic analysis showed that the negative values of ∆G0 of PFOA adsorption ranged from -2.24 to -5.38 kJ/mol, confirmed that the process was spontaneous and involved physical pore-filling. However, the close similarity between the adsorption and desorption isotherms, coupled with a low hysteresis coefficient, clarified that the PFOA adsorption was unstable and prone to desorption. The thermodynamic insights from this study highlighted that lignin-rich biochar produced at high temperature with high micropore content was very favorable for the effective adsorptive removal of PFOA, while the long-term adsorption stability should not be overlooked in the remediation applications.

The impact of biochar's physicochemical properties on sorption of perfluorooctanoic acid (PFOA)

To better characterize properties governing the sorption of per- and polyfluoroalkyl substances (PFAS) to biochar, twenty-three diverse biochars were characterized and evaluated as sorbents for perfluorooctanoic acid (PFOA). Biochars were produced at various temperatures, using two different technologies, and made from sewage sludge, food waste reject, wood wastes, and one reference substrate (wood pellets). The biochars were characterized in terms of surface area, pore volume and pore size distributions, elemental composition, leachable elements, ash content, pH, zeta potential, condensed aromatic carbon (ConAC) content (determined by benzenepolycarboxylic acid (BPCA) markers), and their -OH functional group content (infrared spectroscopy). PFOA sorption isotherms were determined using Polanyi-Dubinin-Manes (PDM) and Freundlich models. The sludge-based biochars [Freundlich coefficients (log KF) between 2.56 ± 0.11 and 6.72 ± 0.22 (μg/kg)/(μg/L)nF; fitted free energy of adsorption (E) and pore volume (Vo) from the PDM model between 13.27 and 17.26 kJ/mol, and 0.50 and 523.51 cm3/kg] outperformed wood biochars [log KF between 1.02 and 4.56 ± 0.22 (μg/kg)/(μg/L)nF; E between 9.87 and 17.44 kJ/mol; Vo between 0.21 and 7.16 cm3/kg] as PFOA sorbents. Multivariate statistical analysis revealed that the sorption capacity was mainly controlled by pore volume within the pore diameter region that could accommodate the molecular size of PFOA (3-6 nm). Hydrophobic interactions between PFOA and aromatic carbon rich regions controlled sorption affinity, especially in the wood biochars.

Machine learning prediction of dye adsorption by hydrochar: Parameter optimization and experimental validation

In response to escalating global wastewater issues, particularly from dye contaminants, many studies have begun using hydrochar to adsorb dye from wastewater. However, the relationship between the preparation conditions of hydrochar, the properties of hydrochar, experimental conditions, types of dyes, and equilibrium adsorption capacity (Q) has not yet been fully explored. This study conducted a comprehensive assessment using twelve distinct ML models. The Gradient Boosting Regressor (GBR) model exhibited superior performance with R² (0.9629) and RMSE (0.1166) in the test dataset, marking it as the most effective among the evaluated models. Moreover, this study also proved the feasibility of the GBR model through stability testing and residual analysis. A feature importance analysis prioritized the variables as follows: experimental conditions (41.5 %), properties of hydrochar (26.0 %), preparation conditions (18.1 %), and type of dye (14.4 %). Meanwhile, experimental conditions (C0 > 30 mmol/g, pH > 8, and higher solvent temperatures) and hydrochar properties (the BET surface area > 2000 m²/g, an (O+N)/C molar ratio < 0.6, and an H/C molar ratio of approximately 0.06) show higher Q for dyes. Experimental validation of the GBR model confirmed its practical utility with a suitable predictive accuracy (R² = 0.8704). Moreover, the study developed a Python-based GUI that has integrated the best GBR models to facilitate researchers' ongoing application and improvement of this predictive model. This study not only underscores the efficacy of ML in enhancing the understanding of dye adsorption by hydrochar but also sets a precedent for future research on sustainable contaminants removal through bio-based adsorbents.

Surface areas and adsorption energies of biochars estimated from nitrogen and water vapour adsorption isotherms

Nitrogen adsorption isotherms, along with the BET model for interpretation, are recommended for estimating biochar surface area. The frequently measured small surface areas of biochars contrast with their high sorption and cation exchange capacities. We hypothesised that water adsorption provides a better tool for estimating the surface area of biochars. Although adsorption energy also appears to be a valuable surface characteristic, there is a lack of studies on this subject. We studied the surface areas and adsorption energies of three waste deposits - peat, willow dust and biochar prepared from these materials at different temperatures - using nitrogen and water vapour adsorption isotherms. The BET model accurately described all water vapour adsorption isotherms but failed for some nitrogen isotherms. Alternative methods for estimating surface areas and adsorption energies were proposed in cases where the BET model did not apply. Nitrogen adsorption was typically much lower than water vapour adsorption, and the estimated surface areas reflected this. However, nitrogen adsorption energies were significantly higher. Nitrogen surface areas increased with pyrolysis temperature, while water vapour surface areas decreased. The surface area estimated from nitrogen adsorption was generally much lower than needed to accommodate the surface-charged groups responsible for the cation exchange capacity of biochars.

New insights into sustainable in-situ fixation of heavy metals in disturbed seafloor sediments

To address the issues of plume formation and heavy metal ion release during deep-sea mining operations, this study employed multi-sourced mineral composite roasting materials (MMCCM) of varying sizes. An in-situ capping technique was applied within a simulated system to immobilize heavy metals in contaminated sediments. The results demonstrated that capping with MMCCM of different sizes significantly suppressed the upward migration of Cu, Co, and Ni from sediments into the overlying seawater following disturbance. Ion diffusion was identified as a key mechanism driving heavy metal migration. By calculating the release rates of heavy metals during both the disturbed and undisturbed phases, it was found that the application of MMCCM induced a negative diffusion of heavy metals, indicating that the MMCCM-sediment layer functioned as a "sink" for heavy metals. FTIR and XPS analysis showed that the primary mechanisms for heavy metal removal by MMCCM were electrostatic attraction and complexation-precipitation. Additionally, capping with MMCCM facilitated the transition of heavy metals from labile to stable forms within the sediments. Through comprehensive evaluation, the long-term effectiveness of the fixed effects was demonstrated as follows: large MMCCM (L@MCM) > medium MMCCM (M@MCM) > small MMCCM (S@MCM) > powder MMCCM (P @ MCM). Finally, we proposed future research directions and introduced the DQSE framework for the sustainable application of MMCCM. Based on the above findings, this study provides new insights and research references for the in-situ immobilization of heavy metals and plume reduction during future deep-sea mining processes.

Biochar-based fixed filter columns for water treatment: A comprehensive review

Biochar used in fixed filter columns (BFCs) has garnered significant attention for its capabilities in material immobilization and recovery, filtration mechanisms, and potential for scale-up, surpassing the limitations of batch experiments. This review examines the efficacy of biochar in BFCs, either as the primary filtering material or in combination with other media, across various wastewater treatment scenarios. BFCs show high treatment efficiency, with an average COD removal of 80 % ±15.3 % (95 % confidence interval: 72 %, 86 %). Nutrient removal varies, with nitrogen-ammonium and phosphorus-phosphate removal averaging 71 ± 17.1 % (60 %, 80 %) and 57 % ± 25.6 % (41 %, 74 %), respectively. Pathogen reduction is notable, averaging 2.4 ± 1.12 log10 units (1.9, 2.9). Biochemical characteristics, pollutant concentrations, and operational conditions, including hydraulic loading rate and retention time, are critical to treatment efficiency. The pyrolysis temperature (typically 300 to 800 °C) and duration (1.0 to 4.0 h) influence biochar's specific surface area (SSA), with higher temperatures generally increasing SSA. This review supports the biochar application in wastewater treatment and guides the design and operation of BFCs, bridging laboratory research and field applications. Further investigation is needed into biochar reuse as a fertilizer or energy source, along with research on BFC models under real-world conditions to fully assess their efficacy, service life, and costs for practical implementation.

Agrowaste-carbon and carbon-based nanocomposites for endocrine disruptive cationic dyes removal: A critical review

Dyes are considered to be pollutants that pose a considerable worldwide health risk, as they have been discovered as agents that affect the endocrine system. Adsorption is the most commonly used method for removing different substances since it is sustainable, flexible, affordable, and easy to use. Researchers have investigated the usage of agro-waste-based adsorbents that are ecologically friendly for the process of adsorption. This research has emphasized the potential of these adsorbents in developing carbon-based nanocomposites. Improved surface functionalization, great compatibility, and flexibility are beneficial uniqueness of carbon-based nanocomposites as well as a wide variety of applications. As a result, they are highly successful in removing cationic dyes. This paper specifically examines the environmentally friendly usage of activated carbons obtained from agricultural waste and the development of carbon-based-nanocomposites to adsorb positively charged dyes. Additionally, it offers an in-depth investigation of various cationic dyes, operating parameters, adsorption isotherms, kinetics, processes, and thermodynamic investigations. Further research is necessary to determine the effectiveness of carbon-based nanocomposites in removing new endocrine-disrupting pollutants. Additionally, these nanocomposites have the potential to be widely used in treating industrial effluents.

Self-sacrificing and self-supporting biomass carbon anode-assisted water electrolysis for low-cost hydrogen production

Electrooxidation of renewable and CO2-neutral biomass for low-cost hydrogen production is a promising and green technology. Various biomass platform molecules (BPMs) oxidation assisted hydrogen production technologies have obtained noticeable progress. However, BPMs anodic oxidation is highly dependent on electrocatalysts, and the oxidation mechanism is ambiguous. Meanwhile, the complexity and insolubility of natural biomass severely constrain the efficient utilization of biomass resources. Here, we develop a self-sacrificing and self-supporting carbon anode (SSCA) using waste corncobs. The combined results from multiple characterizations reveal that the structure-property-activity relationship of SSCA in carbon oxidation reaction (COR). Theoretical calculations demonstrate that carbon atoms with a high spin density play a pivotal role in reducing the adsorption energy of the reactive oxygen intermediate (*OH) during the transition from OH- to *OH, thereby promoting COR. Additionally, the HER||COR system allows driving a current density of 400 [Formula: see text] at 1.24 V at 80 °C, with a hydrogen production electric consumption of 2.96 kWh Nm-3 (H2). The strategy provides a ground-breaking perspective on the large-scale utilization of biomass and low-energy water electrolysis for hydrogen production.

Synthesis and characterization of nano iron oxide biochar composite for efficient removal of crystal violet from water

In the present study, Coconut Husk Biochar (CHB) was synthesize from widely available, locally sourced agro waste, coconut husk and characterized using different techniques like scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET) analysis, Fourier-transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD). CHB was tested for its ability to adsorb crystal violet (CV), a commonly used cationic dye, from water. It was capable of adsorbing more than 98 % of CV from water and follows Freundlich isotherm model with pseudo second order kinetics though the overall process was unfavourable. Moreover, separation of CHB from water after adsorption is a cumbersome process. Thus, unmodified CHB is not suitable for use as an adsorbent for CV. Magnetic nano iron oxide Biochar Composite (MBC) was synthesized by deposition of nano iron oxide (Fe3O4) onto its surface by co-precipitation method and characterized using SEM, XRD and FTIR. SEM analysis provided visual evidence of this deposition which was further confirmed by XRD and FTIR analysis. MBC was also effective in adsorbing more than 90 % of CV from aqueous solution though a decrease in adsorption capacity was observed. Adsorption data followed Langmuir isotherm model and pseudo second order kinetics. MBC is superparamagnetic and is strongly attracted to a small bar magnet, facilitating easy removal from water after CV adsorption.

Zn@TA assisted dual cross-linked 3D printable glycol grafted chitosan hydrogels for robust antibiofilm and wound healing

Rapid regeneration of the injured tissue or organs is necessary to achieve the usual functionalities of the damaged parts. However, bacterial infections delay the regeneration process, a severe challenge in the personalized healthcare sector. To overcome these challenges, 3D-printable multifunctional hydrogels of Zn/tannic acid-reinforced glycol functionalized chitosan for rapid wound healing were developed. Polyphenol strengthened intermolecular connections, while glutaraldehyde stabilized 3D-printed structures. The hydrogel exhibited enhanced viscoelasticity (G'; 1.96 × 104 Pa) and adhesiveness (210 kPa). The dual-crosslinked scaffolds showed remarkable antibacterial activity against Bacillus subtilis (∼81 %) and Escherichia coli (92.75 %). The hydrogels showed no adverse effects on human dermal fibroblasts (HDFs) and macrophages (RAW 264.7), indicating their superior biocompatibility. The Zn/TA-reinforced hydrogels accelerate M2 polarization of macrophages through the activation of anti-inflammatory transcription factors (Arg-1, VEGF, CD163, and IL-10), suggesting better immunomodulatory effects, which is favorable for rapid wound regeneration. Higher collagen deposition and rapid re-epithelialization occurred in scaffold-treated rat groups vis-à-vis controls, demonstrating superior wound healing. Taken together, the developed multifunctional hydrogels have great potential for rapidly regenerating bacteria-infected wounds in the personalized healthcare sector.

Biofilm enhanced the mitigations of antibiotics and resistome in sulfadiazine and trimethoprim co-contaminated soils

Reducing antibiotic levels in soil ecosystems is vital to curb the dissemination of antimicrobial resistance genes (ARGs) and mitigate global health threats. However, gaps persist in understanding how antibiotic resistome can be suppressed during antibiotic degradation. Herein, we investigate the efficacy of a biochar biofilm incorporating antibiotics-degrading bacterial strain (Arthrobacter sp. D2) to mitigate antibiotic resistome in non-manured and manure-amended soils with sulfadiazine (SDZ) and trimethoprim (TMP) contamination. Results show that biofilm enhanced SDZ degradation by 83.0% within three days and increased TMP attenuation by 55.4% over 60 days in non-manured soils. In the non-manured black soil, the relative abundance of ARGs increased initially after biofilm inoculation. However, by day 30, it decreased by 20.5% compared to the controls. Moreover, after 7 days, biofilm reduced TMP by 38.5% in manured soils and decreased the total ARG abundance by 19.0%. Thus, while SDZ degradation did not increase sulfonamide resistance genes, TMP dissipation led to a proliferation of insertion sequences and related TMP resistance genes. This study underscores the importance of antibiotic degradation in reducing related ARGs while cautioning against the potential proliferation and various ARGs transfer by resistant microorganisms.

The Influence of In-Mould Annealing and Accelerated Ageing on the Properties of Impact-Modified Poly(Lactic Acid)/Biochar Composites

In the last few decades, a large number of natural additives have been analysed in connection with the improvement of the properties of poly(lactic acid) (PLA) bioplastic materials. This article comprehensively analyses the applicability of a highly stable and progressive multifunctional additive produced from renewable resources-biochar. The effect of biochar on the structural development and various thermo-mechanical properties was evaluated as a function of the biochar size and volume, addition of an impact modifier and in-mould annealing during injection moulding. In addition, the effect of accelerated ageing on the change in properties was also analysed. The evaluated results showed a significant influence of the particle size and biochar content on the properties of PLA biocomposites. However, the crucial aspect was the production process with a higher mould temperature and longer production time. Consequently, the effect of additives with adjusted processing worked synergistically on the performance of the resulting biocomposites. The accelerated ageing process did not induce any significant changes in the mechanical, impact and heat resistance behaviour of neat PLA. On the other hand, significant effects on the behaviour of the modified PLA biocomposites were observed. Impact-modified PLA achieved a toughness of 28 kJ/m2, an increase of 61% compared to neat PLA. Similar observations were made when submicron biochar was incorporated into the PLA matrix (a 22% increase with PLA/5B1). These increases were even more pronounced when injected into a 100 °C mould. Due to the synergistic effect, excellent impact toughness results of 95 kJ/m2 (a 428% increase) were achieved with PLA/IM/5B1. Moreover, these results persisted even after accelerated ageing.

Enhancing biochar production: A technical analysis of the combined influence of chemical activation (KOH and NaOH) and pyrolysis atmospheres (N2/CO2) on yields and properties of rice husk-derived biochar

The production of biochar from biomass has received considerable interest due to its potential in environmental applications; however, optimizing biochar properties remains a major challenge. The objective of the present study was to investigate the synergistic effects of pyrolysis atmospheres (N2 and CO2) and chemical activation (pre- and post-pyrolysis) with NaOH and KOH on the properties of biochar useful for its environmental applications. In this study rice husk and biochar were impregnated with KOH and NaOH before and after pyrolysis, which was carried out at 600 °C under N₂ and CO₂ atmosphere. The pyrolytic yields (biochar, liquid and gas) and detailed characterization of biochar were performed. The results showed that pre-activation with both alkalis under a CO2 atmosphere slightly decreased the biochar yield and carbon contents while increasing oxygen in biochars compared to N2 atmosphere. Alkali pre-activation in the CO2 atmosphere considerably increased the specific surface area and pore volume of biochars compared to the N2 atmosphere, with KOH being more effective than NaOH. The maximum specific surface area (SSA) and pore volume (PV) of biochar obtained were 178.4 m2/g and 0.60 cm3/g for KOH activated biochar under CO2, which were 3.2 times and 30 times higher than the untreated biochar. The post-activation of biochars with both alkalis resulted in moderate improvements in textural properties. Overall, chemical activation under CO2 pyrolysis facilitated a higher level of chemical activation reactions leading to increased formation of oxygen functional groups and contributed to enhanced SSA and PV of the biochar useful for adsorption.

Soil application of activated hydrochar derived from sewage sludge enhances plant growth and reduces nitrogen loss

Sewage sludge treatment and disposal is a considerable environmental and economic burden, and is considered a major global challenge. Here, sewage sludge treatment and disposal were studied with a focus on hydrothermal carbonization and the use of hydrochar (HC) as a soil amendment after Fenton-reaction activation. The underlying hypothesis was that enhanced adsorption of nutrients (e.g., ammonium) by activated HC (AHC) increases their availability, thus enhancing plant growth and reducing environmental impacts such as greenhouse gas emission and N leaching relative to conventional soil-amendment techniques. The impact of AHC on lettuce plant growth, N leaching, ammonia volatilization, soil trace-gas emissions, and respiration was studied in a net-house planting experiment. Four treatments were tested in quadruplicate using sandy loam soil with addition of either AHC, urea fertilizer, or AHC plus urea, and a control with no amendment. Activation-induced changes in AHC surface properties (indicated by SEM and XPS analyses) resulted in an NH4+ adsorption capacity 60 % higher than that of untreated HC. The AHC + urea soil treatment yielded the most enhanced plant growth, followed by urea and AHC treatments with comparable growth rates. Least growth occurred in the control with no amendment. Nitrogen loss through gas emissions, per kg of lettuce, was lowest with AHC + urea treatment, although its mean N emission as nitrous oxide (N2O) was notably higher at 2.3 mg N2O-N kg-1 than for other treatments (∼0.4 mg N2O-N kg-1). Dissolved-N leaching was reduced by up to four times with AHC treatment due to its higher NH4+ adsorption capacity, indicating reduced environmental impact of the AHC amendment. AHC application is therefore considered a sustainable soil amendment, enhancing plant growth and reducing N loss and sewage environmental impact.

Potential and challenge in accelerating high-value conversion of CO2 in microbial electrosynthesis system via data-driven approach

Microbial electrosynthesis for CO2 utilization (MESCU) producing valuable chemicals with high energy density has garnered attention due to its long-term stability and high coulombic efficiency. The data-driven approaches offer a promising avenue by leveraging existing data to uncover the underlying patterns. This comprehensive review firstly uncovered the potentials of utilizing data-driven approaches to enhance high-value conversion of CO2 via MESCU. Firstly, critical challenges of MESCU advancing have been identified, including reactor configuration, cathode design, and microbial analysis. Subsequently, the potential of data-driven approaches to tackle the corresponding challenges, encompassing the identification of pivotal parameters governing reactor setup and cathode design, alongside the decipheration of omics data derived from microbial communities, have been discussed. Correspondingly, the future direction of data-driven approaches in assisting the application of MESCU has been addressed. This review offers guidance and theoretical support for future data-driven applications to accelerate MESCU research and potential industrialization.

Humic substances sorption from wastewater on the biochar produced from the waste materials

In recent years, increasing attention has been paid to the possibility of converting waste materials, e.g. manure, bio-waste, green waste, waste from the water and sewage industries (e.g. post-fermentation sludge), and agri-food waste into biochars (BCs) by pyrolysis. The ability of biochar to improve soil health and fertility is driving growing interest in its use as a soil amendment. A high soil stability of BCs and their excellent nutrient sorption properties are the main reasons for the superiority of such materials over other organic soil amendments. In addition, BCs can retain soil-relevant compounds, including humic substances (HSs). Since most of the resources used to produce humic fertilisers are non-renewable, the effluent from anaerobic digestion of sewage sludge (reject water, RW), which contains high levels of HSs, is considered a promising target for their recovery. In this study, the potential of ten BCs derived from pine, oak, straw, sunflower, and digestate at different pyrolysis temperatures for the recovery of HSs from RW was evaluated. The sorption of HSs on the applied BCs was conducted using contact method for 24 h and then determined spectrophotometrically. The most effective sorbents for HSs from RW were BCs obtained from straw in the low and high temperatures with the sorption capacity of 3.10 mg g-1 and 5.31 mg g-1, respectively. It was observed that the BCs produced from the same biomass at different pyrolysis temperatures had different sorption capacities for FA, HA, and a mixture of these compounds. The results indicated that BCs obtained from sunflower at different temperatures and oak at high temperature were the most promising sorbents for the recovery of HSs from RW. Such materials have the potential to be applied to soil and were selected for further evaluation due to their ability to enhance soil quality and immobilize pollutants. Further studies will assess their effectiveness in different soil conditions, their stability and persistence, and their impact on plant health and growth.

Global meta-analysis and machine learning reveal the critical role of soil properties in influencing biochar-pesticide interactions

Biochar application in soils is increasingly advocated globally for its dual benefits in enhancing agricultural productivity and sequestering carbon. However, lingering concerns persist regarding its environmental impact, particularly concerning its interactions with pesticide residues in soil. Previous research has fragmentarily indicated elevated pesticide residues and prolonged persistence in biochar-amended soil, suggesting a potential adverse consequence of biochar application on pesticide degradation. Yet, conclusive evidence and conditions for this phenomenon remain elusive. To address this gap, we conducted a comprehensive assessment using meta-analysis and machine learning techniques, synthesizing data from 58 studies comprising 386 observations worldwide. Contrary to initial concerns, our findings revealed no definitive increase in pesticide concentrations in soil following biochar application. Moreover, a significant reduction of 66 % in pesticide concentrations within soil organisms, such as plants and earthworms, was observed. The quantitative analysis identified soil organic matter content as a key factor influencing biochar-pesticide interactions, suggesting that applying biochar to soils rich in organic matter is less likely to increase pesticide persistence. This study provides a critical assessment of the environmental fate of pesticides under biochar application, offering valuable guidance for the optimal utilization of both pesticides and biochar in sustainable agricultural practices.

Pore Engineering in Biomass-Derived Carbon Materials for Enhanced Energy, Catalysis, and Environmental Applications

Biomass-derived carbon materials (BDCs) are highly regarded for their renewability, environmental friendliness, and broad potential for application. A significant advantage of these materials lies in the high degree of customization of their physical and chemical properties, especially in terms of pore structure. Pore engineering is a key strategy to enhance the performance of BDCs in critical areas, such as energy storage, catalysis, and environmental remediation. This review focuses on pore engineering, exploring the definition, classification, and adjustment techniques of pore structures, as well as how these factors affect the application performance of BDCs in energy, catalysis, and environmental remediation. Our aim is to provide a solid theoretical foundation and practical guidance for the pore engineering of BDCs to facilitate the rapid transition of these materials from the laboratory to industrial applications.

The adsorption mechanism and optimal dosage of walnut shell biochar for chloramphenicol

Biochar derived from biomass pyrolysis has proven to be an excellent material for pesticide adsorption and can be used as soil amendment for pesticide non-point pollution. However, the adsorption and desorption mechanisms for certain biochar and pesticide are still unclear. In this study, we investigated the properties of biochar derived from walnut (Juglans regia L.) shell (WSB), and used batch equilibrium method to investigate the adsorption and desorption behavior for chlorantraniliprole (CAP). The physical-chemical analysis showed that there were mainly lignin charcoal of alkyl carbon, methoxyl carbon, aromatic carbon, and carboayl carbon as the primary carbon compounds of WSB. The π - π electron donor acceptor interaction, electrostatic interaction, and hydrogen bond were the primary adsorption mechanisms of the WSB adsorption. Batch equilibrium study under 298 K showed that WSB application in the soil significantly improved the adsorption ability for CAP, and the adsorption behavior was a mono-layer adsorption process as Langmuir model fitted the adsorption isotherm data better than the Freundlich model. While Freundlich model analysis showed that WSB addition to the soil changed the isothermal adsorption line from the S style to the L style. The spontaneous degree reaction of sorbents from strong to weak was in the following order: 5%-WSB >7%-WSB >10%-WSB >1%-WSB >3%-WSB > soil > WSB, and the maximum application effect was achieved at 5 % (m/m) WSB dosage mixed with the soil. Therefore, we considered that WSB addition in soil increased its CAP adsorption capacity, and 5 % (m/m) WSB application was the best choice for CAP pollution control. These data will contribute to the adsorption mechanism and the optimal use dosage of WSB for CAP pollution control.

Predicting and refining acid modifications of biochar based on machine learning and bibliometric analysis: Specific surface area, average pore size, and total pore volume

Acid-modified biochar is a modified biochar material with convenient preparation, high specific surface area, and rich pore structure. It has great potential for application in the heavy metal remediation, soil amendments, and carrying catalysts. Specific surface area (SSA), average pore size (APS), and total pore volume (TPV) are the key properties that determine its adsorption capacity, reactivity, and water holding capacity, and an intensive study of these properties is essential to optimize the performance of biochar. But the complex interactions among the preparation conditions obstruct finding the optimal modification strategy. This study collected dataset through bibliometric analysis and used four typical machine learning models to predict the SSA, APS, and TPV of acid-modified biochar. The results showed that the extreme gradient boosting (XGB) was optimal for the test results (SSA R2 = 0.92, APS R2 = 0.87, TPV R2 = 0.96). The model interpretation revealed that the modification conditions were the major factors affecting SSA and TPV, and the pyrolysis conditions were the major factors affecting APS. Based on the XGB model, the modification conditions of biochar were optimized, which revealed the ideal preparation conditions for producing the optimal biochar (SSA = 727.02 m2/g, APS = 5.34 nm, TPV = 0.68 cm3/g). Moreover, the biochar produced under specific conditions verified the generalization ability of the XGB model (R2 = 0.99, RMSE = 12.355). This study provides guidance for optimizing the preparation strategy of acid-modified biochar and promotes its potentiality for industrial application.

Raw feedstock vs. biochar from olive stone: Impact on the sorption-desorption of diclosulam and tropical soil improvement

The addition of carbon-rich materials, such as raw feedstocks (RAW) and biochars, to agricultural soils is on the rise. This activity has many advantages, such as improving fertility, increasing water retention, and sequestering carbon. However, they can also increase the sorption of residual herbicides in the soil, reducing the effectiveness of weed control. Thus, the objective of this study was to evaluate soil improvement and the sorption-desorption process of diclosulam in soil unamended and amended with RAW from olive stone and their biochars produced in two pyrolysis temperatures (300 and 500 °C). Oxisol was used in this study, unamended and amended with RAW and biochars (BC300 and BC500) in a rate of 10% (w w-1). The sorption-desorption process was assessed by batch-equilibrium experiments and the analysis was performed using high-performance liquid chromatography (HPLC). The addition of the three materials to the soil increased the contents of pH, organic carbon, P, K, Ca, Mg, Zn, Fe, Mn, Cu, B, cation exchange capacity, base saturation and decreased H + Al. The unamended soil had Kf (Freundlich sorption coefficient) values of diclosulam sorption and desorption of 1.56 and 12.93 mg(1 - 1/n) L1/n Kg-1, respectively. Unamended soil sorbed 30.60% and desorbed 13.40% of herbicide. Soil amended with RAW, BC300, and BC500 sorbed 31.92, 49.88, and 30.93% of diclosulam and desorbed 13.33, 11.67, and 11.16%, respectively. The addition of RAW and biochars from olive stone has the potential to change the soil fertility, but does not interfere with the bioavailability of diclosulam in weed control under field conditions, since the materials slightly influenced or did not alter the sorption-desorption of diclosulam.

Zn-Al layered double hydroxide supported on waste cow dung-derived biochar as a highly efficient adsorbent for anionic dye removal from contaminated water

In this study, Zn-Al-SO42- LDH-functionalized biochar was fabricated using the co-precipitation method. The biochar was synthesized from waste cow dung using a low-temperature pyrolysis process (300 °C). The materials were fully characterized by TGA, FTIR, EDS, SEM, and XRD analysis. Then, a comparative study was performed to investigate the adsorption capacity of the materials against an anionic dye (i.e., methyl orange (MO)). The LDH-functionalized biochar demonstrated high adsorption capacity (400 mg/g in 120 min, at pH 5) compared to the raw biochar (212 mg/g in 120 min, at pH 5). The effect of various adsorption parameters (e.g., pH of the dye solution, temperature, initial concentration, adsorbent dosage, and contact time) was investigated. The adsorption of MO on LDH-functionalized biochar followed the Freundlich isotherm and pseudo-second-order kinetics, while the raw biochar followed the Langmuir isotherm and pseudo-second-order kinetics. The thermodynamic data indicated the endothermic nature of adsorption and an increase in the degree of randomness during adsorption. The enhanced adsorption capacity of the Zn-Al LDH-functionalized char was attributed to the synergistic effect of the surface adsorption into the porous biochar matrix, interlayer adsorption, and ion exchange capacity of the LDHs. Therefore, modification of waste cow dung-derived biochar with Zn-Al LDH can be a promising approach to fabricate a highly efficient adsorbent for toxic dyes from wastewater.

Evaluation of South Korean marine waste resources for hydrochar production: Effect of process variables

This study assessed the hydrochar production potential of fish and crustacean waste from 8 marine species (Scomber japonicus, Trichiurus lepturus, Larimichthys polyactis, Trachurus trachurus, Paralichthys olivaceus Litopenaeus vannamei, Portunus trituberculatus, and Penaeus monodon) through hydrothermal carbonization (HTC) of their waste fractions. The impact of reaction temperature (200 - 240°C), fixed residence time (5 h), and water-to-biomass ratio (7) on HTC was analyzed. The results showed that hydrochar yields varied between fish (15.1 - 21.5 %) and crustaceans (36.9 - 69.3 %). The elemental composition and surface properties of the hydrochar were influenced by reaction temperature, as indicated by the pH point of zero charge. The adsorption capacity of hydrochar was tested for methylene blue (MB, 2.7 - 10.8 mg/g) and methyl orange (MO, 5.9 - 9.2 mg/g), with MO showing higher adsorption, except for Scomber japonicus, Larimichthys polyactis, and Trachurus trachurus. These findings highlight the significant potential for converting marine waste into valuable hydrochar, contributing to waste management and sustainable resource utilization.

Effect of natural aging on biochar physicochemical property and mobility of Cd (II)

This project utilized both field experiment and laboratory analyses to address the gap in understanding regarding the alterations in properties and functions of biochar, and the impact of heavy metal passivation in soil over long-term natural field aging. The study aimed to examine the changes in the physical and chemical characteristics of biochar over an extended period of natural aging. Additionally, it sought to analyze the impact and mechanisms of biochar in reducing of the harmful effects of the heavy metal cadmium (Cd) during the aging process. Both original and aged biochar conformed to the pseudo-second-order kinetics model and the Langmuir model. The aging process enhanced the adsorption of Cd by biochar and mitigated the leaching of Cd2+ into the soil. These findings provide a scientific basis for evaluating biochar's environmental behavior and its potential use in the remediation of soil contaminated with heavy metals.

Biochar-based adsorption for heavy metal removal in water: a sustainable and cost-effective approach

The increasing contamination of aquatic bodies by heavy metals poses a significant threat to environment and human health, necessitates innovative, sustainable and cost-effective remediation strategies. Due to their persistence and toxicity, heavy metals like copper (Cu), lead (Pb), mercury (Hg), and cadmium (Cd) pose severe threats, even in trace amounts. Traditional removal methods of these heavy metals, like chemical precipitation, oxidation/reduction, filtration, ion exchange, membrane separation, and adsorption, are costly, inefficient, and have drawbacks. As an efficient and low-cost adsorbent, biochar has the potential for heavy metal remediation from water. Biochar is a versatile carbonaceous material produced through pyrolysis of organic wastes, emerged as a powerful adsorbent for heavy metal removal from contaminated water. The unique property of biochar makes it an effective medium immobilizing and capturing of heavy metals like Pb, Cd, As and Hg. Various factors affect its adsorption potential and capacity. Feedstocks type, composition, activation methods, and production processes including the pyrolysis temperature, temperature rate and residence time significantly impact the efficacy of biochar. Therefore, this review has assessed, compared, and contrasted different forms of biochar along with their production methods, modification techniques and mechanisms for their potential use as an adsorbent for heavy metal removal from the contaminated water. Modified biochar offers an environmentally friendly and cost-effective solution for water purification and remediation of toxic heavy metals from water. This review highlights the biochar potential as a crucial component for future research projects focusing on water treatment technologies, providing avenues for safer and cleaner water resources.

A Comprehensive Review of Lab-Scale Studies on Removing Hexavalent Chromium from Aqueous Solutions by Using Unmodified and Modified Waste Biomass as Adsorbents

Anthropogenic activities and increasing human population has led to one of the major global problems of heavy metal contamination in ecosystems and to the generation of a huge amount of waste material biomass. Hexavalent chromium [Cr(VI)] is the major contaminant introduced by various industrial effluents and activities into the ecosystem. Cr(VI) is a known mutagen and carcinogen with numerous detrimental effects on the health of humans, plants, and animals, jeopardizing the balance of ecosystems. Therefore, the remediation of such a hazardous toxic metal pollutant from the environment is necessary. Various physical and chemical methods are available for the sequestration of toxic metals. However, adsorption is recognized as a more efficient technology for Cr(VI) remediation. Adsorption by utilizing waste material biomass as adsorbents is a sustainable approach in remediating hazardous pollutants, thus serving the dual purpose of remediating Cr(VI) and exploiting waste material biomass in an eco- friendly manner. Agricultural biomass, industrial residues, forest residues, and food waste are the primary waste material biomass that could be employed, with different strategies, for the efficient sequestration of toxic Cr(VI). This review focuses on the use of diverse waste biomass, such as industrial and agricultural by-products, for the effective remediation of Cr(VI) from aqueous solutions. The review also focuses on the operational conditions that improve Cr(VI) remediation, describes the efficacy of various biomass materials and modifications, and assesses the general sustainability of these approaches to reducing Cr(VI) pollution.

Sulfur release behavior and sulfur fixation mechanism during biomass microwave co-pyrolysis of Ascophyllum and rice straw

Co-pyrolysis with low-sulfur biomass is expected to improve the yield and quality of bio-fuels, without the usage of calcium-based desulfurizer. Sulfur transformation during microwave fluidized-bed co-pyrolysis between terrestrial and marine biomass (Ascophyllum, AS; Rice straw, RS) was investigated. Sulfur release was promoted during biomass co-pyrolysis, but it was inhibited during pyrolysis between AS and low-sulfur char. Thermal cracking of biomass was promoted during co-pyrolysis between biomass, accelerating the combination of H atoms and -SH radicals. Introduction of low-sulfur bio-char (CA) inhibited the generation of bio-char and the release of sulfur. Released sulfur was captured by -OH/C = C functional groups on bio-char through dehydration reactions/addition reactions, forming mercaptan in bio-char. Furthermore, introduction of microwave and bio-char promoted the cyclization and aromatization reaction, converting mercaptan to thiophene and improving the thermal stability of solid sulfur, and thus increasing in-situ sulfur fixation rate.

Biochar-based composites for removing chlorinated organic pollutants: Applications, mechanisms, and perspectives

Chlorinated organic pollutants constitute a significant category of persistent organic pollutants due to their widespread presence in the environment, which is primarily attributed to the expansion of agricultural and industrial activities. These pollutants are characterized by their persistence, potent toxicity, and capability for long-range dispersion, emphasizing the importance of their eradication to mitigate environmental pollution. While conventional methods for removing chlorinated organic pollutants encompass advanced oxidation, catalytic oxidation, and bioremediation, the utilization of biochar has emerged as a prominent green and efficacious method in recent years. Here we review biochar's role in remediating typical chlorinated organics, including polychlorinated biphenyls (PCBs), triclosan (TCS), trichloroethene (TCE), tetrachloroethylene (PCE), organochlorine pesticides (OCPs), and chlorobenzenes (CBs). We focus on the impact of biochar material properties on the adsorption mechanisms of chlorinated organics. This review highlights the use of biochar as a sustainable and eco-friendly method for removing chlorinated organic pollutants, especially when combined with biological or chemical strategies. Biochar facilitates electron transfer efficiency between microorganisms, promoting the growth of dechlorinating bacteria and mitigating the toxicity of chlorinated organics through adsorption. Furthermore, biochar can activate processes such as advanced oxidation or nano zero-valent iron, generating free radicals to decompose chlorinated organic compounds. We observe a broader application of biochar and bioprocesses for treating chlorinated organic pollutants in soil, reducing environmental impacts. Conversely, for water-based pollutants, integrating biochar with chemical methods proved more effective, leading to superior purification results. This review contributes to the theoretical and practical application of biochar for removing environmental chlorinated organic pollutants.

An economical preparation strategy of magnetic biochar with high specific surface area for efficient removal of methyl orange

Magnetic biochar (MBC) was obtained from pepper straw by impregnation-microwave pyrolysis method. The pyrolysis temperature and FeCl3 impregnation concentration were investigated on the structural properties of MBC and the adsorption of methyl orange (MO) in water. Characterization results showed that pyrolysis temperature and iron species significantly increased the specific surface area of MBC, which could reach the maximum of 2038.61 m2/g, and also provided more active adsorption sites by promoting the generation of graphitized structures and surface polar functional groups. MBC0.2-900 was selected as the adsorbent for MO with the maximum adsorption capacity reached 437.18 mg·g-1, 3.4 times higher than the virgin biochar. The adsorption process was dominated by chemisorption as well as spontaneous and exothermic. The adsorption mechanisms included pore-filling interaction, π-π EDA interaction, electrostatic interaction, hydrogen bonding, and Lewis acid-base electron interaction. In addition, MBC also exhibited excellent separability and reusability as a low-cost adsorbent. This study provided some theoretical foundation and technological support for producing high-performance biochar and developing pollutant removal technology in wastewater.

Effects of co-application of biochar and nitrogen fertilizer on soil profile carbon and nitrogen stocks and their fractions in wheat field

Applying biochar to nitrogen (N)-fertilized soils is recognized as an effective technique for enhancing soil carbon (C) accumulation and improving agroecosystem sustainability. However, the impact of co-application of biochar and N fertilizer on soil C and N stocks, as well as their fractions, within the 0-60 cm soil profile remains unclear. This study examined the soil C and N fractions as well as stocks in soil profiles, and the primary influencing factors in wheat field with different rates of biochar (0, 20 and 40 t ha-1; B0, B1 and B2) and N application (0, 180 and 360 kg N ha-1; N0, N1 and N2). The results revealed that compared to B0N0 treatment, biochar plus N application increased soil organic carbon (SOC) and dissolved organic carbon (DOC), while N application alone decreased microbial biomass carbon (MBC). SOC in topsoil (0-10 cm) and DOC in subsoil (40-60 cm) were more susceptible to biochar and N application. The combined application of biochar and N enhanced soil N fractions, with NO3--N having the highest sensitivity than the other N fractions, whereas biochar application alone decreased topsoil inorganic N content. Biochar and N application significantly altered soil C stocks (4.33%-42.20%) and N stocks (-1.24%-20.91%) within the 0-60 cm soil layers, and belowground biomass and SOC were the main influencing factors, respectively. The combination of moderate biochar (42.35 t ha-1) and N (277.78 kg ha-1) application was the most beneficial for soil C accumulation in the 0-60 cm depth. These findings indicate the positive impacts of co-applying of biochar and N in agroecosystems on soil C and N accumulations, and highlight the importance of C and N stabilization in both topsoil and subsoil under management practice.

Impact of biochar on the degradation rates of three pesticides by vegetables and its effects on soil bacterial communities under greenhouse conditions

A 28 days pesticide degradation experiment was conducted for broccoli (Brassica oleracea L. var. italica Planch) and pakchoi (Brassica chinensis L.) with three pesticides (chlorantraniliprole (CAP), haloxyfop-etotyl (HPM), and indoxacarb (IXB)) to explore the effects of biochar on pesticide environmental fate and rhizosphere soil diversity. Rice straw biochar (RB) was applied to soil at a 25.00 t ha-1 dosage under greenhouse conditions, and its effects on the degradation of three pesticides in vegetables and in soil were investigated individually. Overall, RB application effectively facilitated CAP and HPM degradation in broccoli by 13.51-39.42% and in broccoli soil by 23.80-74.10%, respectively. RB application slowed the degradation of CAP, HPM and IXB in pakchoi by 0.00-57.17% and slowed the degradation of CAP in pakchoi by 37.32-43.40%. The results showed that the effect of RB application on pesticide degradation in crops and soil was related to biochar properties, pesticide solubility, plant growth status, and soil characteristics. Rhizosphere soil microorganisms were also investigated, and the results showed that biochar application may be valuable for altering bacterial richness and diversity. The effect of biochar application on pesticide residues in crops and soil was influenced by the vegetable variety first, and the second was pesticide characteristics. RB applied to soil at a 25.00 t ha-1 dosage under greenhouse conditions is recommended for broccoli production to ensure food safety. Our results suggested that biochar application in soil could reduce pesticide non-point source pollution, especially for highly soluble pesticides, and could affect soil microorganisms.

Ball-milled biochar-modified zero-valent aluminum activates peroxodisulfate for phenol degradation: Enhancement of catalysis by membrane-breaking effect

Zero-valent aluminum (ZVAl) is a potential activator for peroxodisulfate (PDS), yet the dense oxide film on its surface hampers electron transfer for the O-O bond cleavage of PDS. We synthesized zero-valent aluminum-biochar (BM-ZVAl@BC) composites through ball milling, which effectively disrupted the native oxide layer on BM-ZVAl@BC. Within the BM-ZVAl@BC/PDS system, biochar (BC) not only suppressed the rapid oxidation of BM-ZVAl@BC but also enhanced the dispersion and electron transfer rate of ZVAl, thereby improving the overall catalytic efficiency. Consequently, the phenol removal efficacy in the BM-ZVAl@BC/PDS system was notably improved. Optimal catalytic performance of the prepared BM-ZVAl@BC was achieved at a charcoal-to‑aluminum mass ratio of 2:1, resulting in 95.7 % phenol removal after 180 min. Quenching experiments and electron paramagnetic resonance (EPR) analysis revealed that both free radicals (SO4•-, •OH, and O2•-) and non-radical species (1O2) contributed to phenol degradation, with SO4•- and •OH playing predominant roles. In summary, the BM-ZVAl@BC/PDS system represented an effective and promising technology for the remediation of phenolic water pollutants.

Engineered lignocellulosic based biochar to remove endocrine-disrupting chemicals: Assessment of binding mechanism

The safety and health of aquatic organisms and humans are threatened by the increasing presence of pollutants in the environment. Endocrine disrupting chemicals are common pollutants which affect the function of endocrine and causes adverse effects on human health. These chemicals can disrupt metabolic processes by interacting with hormone receptors upon consumptions by humans or aquatic species. Several studies have reported the presence of endocrine disrupting chemicals in waterbodies, food, air and soil. These chemicals are associated with increasing occurrence of obesity, metabolic disorders, reproductive abnormalities, autism, cancer, epigenetic variation and cardiovascular risk. Conventional treatment processes are expensive, not environment friendly and unable to achieve complete removal of these harmful chemicals. In recent years, biochar from different sources has gained a considerable interest due to their adsorption efficiency with porous structure and large surface areas. biochar derived from lignocellulosic biomass are widely used as sustainable catalysts in soil remediation, carbon sequestration, removal of organic and inorganic pollutants and wastewater treatment. This review conceptualizes the production techniques of biochar from lignocellulosic biomass and explores the functionalization and interaction of biochar with endocrine-disrupting chemicals. This review also identifies the further needs of research. Overall, the environmental and health risks of endocrine-disrupting chemicals can be dealt with by biochar produced from lignocellulosic biomass as a sustainable and prominent approach.

Bibliometric analysis of research trends in biogranulation technology for wastewater treatment

Inadequate management and treatment of wastewater pose significant threats, including environmental pollution, degradation of water quality, depletion of global water resources, and detrimental effects on human well-being. Biogranulation technology has gained increasing traction for treating both domestic and industrial wastewater, garnering interest from researchers and industrial stakeholders alike. However, the literature lacks comprehensive bibliometric analyses that examine and illuminate research hotspots and trends in this field. This study aims to elucidate the global research trajectory of scientific output in biogranulation technology from 1992 to 2022. Utilizing data from the Scopus database, we conducted an extensive analysis, employing VOSviewer and the R-studio package to visualize and map connections and collaborations among authors, countries, and keywords. Our analysis revealed a total of 1703 journal articles published in English. Notably, China emerged as the leading country, Jin Rencun as the foremost author, Bioresource Technology as the dominant journal, and Environmental Science as the prominent subject area, with the Harbin Institute of Technology leading in institutional contributions. The most prominent author keyword identified through VOSviewer analysis was "aerobic granular sludge," with "sequencing batch reactor" emerging as the dominant research term. Furthermore, our examination using R Studio highlighted "wastewater treatment" and "sewage" as notable research terms within the field. These findings underscore a diverse research landscape encompassing fundamental aspects of granule formation, reactor design, and practical applications. This study offers valuable insights into biogranulation potential for efficient wastewater treatment and environmental remediation, contributing to a sustainable and cleaner future.

Chemometrically-aided general approach to novel adsorbents studies: Case study on the adsorption of pharmaceuticals by the carbonized Ailanthus altissima leaves

A chemometrically based approach was applied to select the most efficient drug adsorbent among the biochars obtained from the novel feedstock, the leaves of the invasive plant (Ailanthus altissima). The representative target adsorbates (atenolol, paracetamol, ketorolac and tetracycline) were selected on the basis of their physicochemical properties to cover a wide chemical space, which is the usual analytical challenge. Their adsorption was investigated using design of experiments as a comprehensive approach to optimise the performance of the adsorption system, rationalise the procedure and overcome common drawbacks. Among the response surface designs, the central composite design was selected as it allows the identification of important experimental factors (solid-to-liquid ratio, pH, ionic strength) and their interactions, and allows the selection of optimal experimental conditions to maximise adsorption performance. The biochars were prepared by pyrolysis at 500 °C and 800 °C (BC-500 and BC-800) and the ZnCl2-activated biochars were prepared at 650 °C and 800 °C (AcBC-650 and AcBC-800). The FTIR spectra revealed that increasing the pyrolysis temperature without activator decreases the intensity of all bands, while activation preserves functional groups, as evidenced by the spectra of AcBC-650 and AcBC-800. High temperatures during activation promoted the development of an efficient surface area, with the maximum observed for AcBC-800 reaching 347 m2 g-1. AcBC-800 was found to be the most efficient adsorbent with removal efficiencies of 34.1, 51.3, 55.9 and 38.2 % for atenolol, paracetamol, ketorolac and tetracycline, respectively. The models describing the relationship between the removal efficiency of AcBC-800 and the experimental factors studied, showed satisfactory predictive ability (predicted R2 > 0.8) and no significant lack-of-fit was observed. The results obtained, including the mathematical models, the properties of the adsorbates and the adsorbents, clearly indicate that the adsorption mechanisms of activated biochars are mainly based on hydrophobic interactions, pore filling and hydrogen bonding.

Synthesis, characterization, and phosphorus adsorption of Mg/Fe-modified biochar from cotton stalk pretreated with Coriolus versicolor

In recent years, the research potential in utilizing biochars as adsorbents in adsorption processes has grown due to their eco-friendly and economical nature. However, biochar often possesses a negative surface charge that limits its affinity for binding anions. Nitric acid washing and pretreatment with Coriolus versicolor can break down the lignocellulosic structure in cotton stalk waste, facilitating the subsequent impregnation of Mg and Fe metal oxides. These pretreatment steps can lead to the production of diverse and functionalized biochars with higher adsorption capacities. In this study, cotton stalk waste was first washed with diluted nitric acid and then subjected to biological pretreatment by incubation with C. versicolor, followed by impregnation with Mg and Fe to obtain CV-CS/Fe and CV-CS/Mg biochars. The results showed that the applied pretreatments altered the physicochemical properties and significantly increased the phosphorus adsorption capacity. The adsorption capacities of CV-CS/Fe and CV-CS/Mg biochars were found to be 277.88 and 507.01 mg g-1, respectively. The results indicate that the incorporation of multiple metal oxide impregnates enhances P adsorption. Furthermore, in the kinetic study, pseudo-first-order and pseudo-second-order models provided a well fit, determining chemical adsorption as the main adsorption mechanism for phosphorus adsorption. The biochars demonstrated compatibility with Langmuir-Freundlich models. Overall, the findings suggest the possibility of synthesizing biochars with improved adsorptive properties through pretreatment, and these engineered biochars hold promising potential as effective adsorbents in the field. PRACTITIONER POINTS: Eco-friendly, natural, and economical biochar was synthesized. Biochar was produced via Coriolus versicolor pretreatment. High adsorption capacities of CV-PS/Mg biochars were found to be 507.01 mg g-1. Adsorption capacities of biochars can be improved by pretreatment.

Recent advances in catalyst design, performance, and challenges of metal-heteroatom-co-doped biochar as peroxymonosulfate activator for environmental remediation

The escalation of global water pollution due to emerging pollutants has gained significant attention. To address this issue, catalytic peroxymonosulfate (PMS) activation technology has emerged as a promising treatment approach for effectively decontaminating a wide range of pollutants. Recently, modified biochar has become an increasingly attractive as PMS activator. Metal-heteroatom-co-doped biochar (MH-BC) has emerged as a promising catalyst that can provide enhanced performance over heteroatom-doped and metal-doped biochar due to the synergism between metal and heteroatom in promoting PMS activation. Therefore, this review aims to discuss the fabrication pathways (i.e., internal vs external doping and pre-vs post-modification) and key parameters (i.e., source of precursors, synthesis methods, and synthesis conditions) affecting the performance of MH-BC as PMS activator. Subsequently, an overview of all the possible PMS activation pathways by MH-BC is provided. Subsequently, Also, the detection, identification, and quantification of several reactive species (such as, •OH, SO4•-, O2•-, 1O2, and high valent oxo species) generated in the catalytic PMS system by MH-BC are also evaluated. Lastly, the underlying challenges associated with poor stability, the lack of understanding regarding the interaction between metal and heteroatom during PMS activation and quantification of radicals in multi-ROS system are also deliberated.

Physicochemical properties and performance of non-woody derived biochars for the sustainable removal of aquatic pollutants: A systematic review

Biochar is a carbon-rich material produced from the partial combustion of different biomass residues. It can be used as a promising material for adsorbing pollutants from soil and water and promoting environmental sustainability. Extensive research has been conducted on biochars prepared from different feedstocks used for pollutant removal. However, a comprehensive review of biochar derived from non-woody feedstocks (NWF) and its physiochemical attributes, adsorption capacities, and performance in removing heavy metals, antibiotics, and organic pollutants from water systems needs to be included. This review revealed that the biochars derived from NWF and their adsorption efficiency varied greatly according to pyrolysis temperatures. However, biochars (NWF) pyrolyzed at higher temperatures (400-800 °C) manifested excellent physiochemical and structural attributes as well as significant removal effectiveness against antibiotics, heavy metals, and organic compounds from contaminated water. This review further highlighted why biochars prepared from NWF are most valuable/beneficial for water treatment. What preparatory conditions (pyrolysis temperature, residence time, heating rate, and gas flow rate) are necessary to design a desirable biochar containing superior physiochemical and structural properties, and adsorption efficiency for aquatic pollutants? The findings of this review will provide new research directions in the field of water decontamination through the application of NWF-derived adsorbents.

Insights into the biogeochemical transformation, environmental impacts and biochar-based soil decontamination of antimony

Every year, a significant amount of antimony (Sb) enters the environment from natural and anthropogenic sources like mining, smelting, industrial operations, ore processing, vehicle emissions, shooting activities, and coal power plants. Humans, plants, animals, and aquatic life are heavily exposed to hazardous Sb or antimonide by either direct consumption or indirect exposure to Sb in the environment. This review summarizes the current knowledge about Sb global occurrence, its fate, distribution, speciation, associated health hazards, and advanced biochar composites studies used for the remediation of soil contaminated with Sb to lessen Sb bioavailability and toxicity in soil. Anionic metal(loid) like Sb in the soil is significantly immobilized by pristine biochar and its composites, reducing their bioavailability. However, a comprehensive review of the impacts of biochar-based composites on soil Sb remediation is needed. Therefore, the current review focuses on (1) the fundamental aspects of Sb global occurrence, global soil Sb contamination, its transformation in soil, and associated health hazards, (2) the role of different biochar-based composites in the immobilization of Sb from soil to increase biochar applicability toward Sb decontamination. The review aids in developing advanced, efficient, and effective engineered biochar composites for Sb remediation by evaluating novel materials and techniques and through sustainable management of Sb-contaminated soil, ultimately reducing its environmental and health risks.