Ageing and fragmentation of marine microplastics

Mass concentration of plastic particles from two-dimensional images

Imaging techniques play a crucial role in characterizing environmental plastics. However, most reported findings rely on two-dimensional projections of particles resting on flat surfaces. This limitation makes it challenging to accurately determine mass concentration, which is essential for deriving toxicologically relevant exposure data. The primary issue arises from the loss of information regarding particle height or thickness. This study aims to evaluate the assumptions necessary to compensate this loss of information. To achieve this, we used a set of environmental plastic particles, mesoplastics and microplastics, from marine campaigns, and precisely measured their three spatial dimensions and mass. Our study demonstrated the feasibility of estimating the mass of plastic particles through two-dimensional images. However, for enhanced accuracy, additional information derived from the dataset of particles under examination is necessary. Specifically, estimating the mass of platelike particles requires information about their height. Similarly, calculating the volume for elongated shapes as cylinders, should be limited to particles with the same width and height and for which their length can be precisely determined, even if the image depicts twisted forms. In conclusion, while obtaining mass concentration from single two-dimensional images enables reasonable estimations, achieving the precision needed for exposure data requires acquiring additional information from the sample and carefully considering the shape of each individual particle.

Exploring the Transport Path of Oceanic Microplastics in the Atmosphere

Microplastics (MP) have been recognized as an emerging atmospheric pollutant, yet uncertainties persist in their emissions and concentrations. With a bottom-up approach, we estimate 6-hourly MP fluxes at the ocean-atmosphere interface, using as an input the monthly ocean surface MP concentrations simulated by the global oceanic model (NEMO/PISCES-PLASTIC, Nucleus for European Modeling of the Ocean, Pelagic Interaction Scheme for Carbon and Ecosystem Studies), a size distribution estimate for the MP in the micrometer range, and a sea salt emission scheme. The atmospheric dispersion is then simulated with the Lagrangian model FLEXPART. We identify hotspot sources in the tropical regions and highlight the seasonal variability of emissions, atmospheric concentrations, and deposition fluxes both on land and ocean surfaces. Due to the variability of MP concentration during the year, the MP flux from the sea surface appears to follow a seasonality opposite to that of sea salt aerosol emissions. The comparison with existing observations of MP in the marine atmosphere suggests an underestimation of one to 2 orders of magnitude in our current knowledge of the MP in the oceans' surface. In addition, we show that the MP in the micrometer range is transported efficiently around the globe and can penetrate and linger in the stratosphere over time scales of months. The interaction of these particles with the chemistry and physics of the atmosphere is still mostly unknown and deserves to be further investigated.

Identification Tools of Microplastics from Surface Water Integrating Digital Image Processing and Statistical Techniques

The primary objective of this study was to demonstrate the potential of digital image analysis as a tool to identify microplastic (MP) particles in surface waters and to facilitate their characterisation in terms of 2D and 3D morphology. Digital image analysis preceded by microscopic analysis was used for an exhaustive quantitative and qualitative evaluation of MPs isolated from the Vistula River. Using image processing procedures, 2D and 3D shape descriptors were determined. Principal Component Analysis was used to interpret the relationships between the parameters studied, characterising MP particle geometry, type and colour. This multivariate analysis of the data allowed three or four main factors to be extracted, explaining approximately 90% of the variation in the data characterising MP morphology. It was found that the first principal component for granules, flakes and films was largely represented by strongly correlated with 2D shape descriptors (area, perimeter, equivalent area diameter) and 3D shape descriptors (Corey Shape Factor, Compactness, Dimensionality). Considering the scraps, principal component PC1 was represented by only five of the above descriptors, and the Compactness variable had the largest contribution to principal component PC2. In addition, for granules, flakes and films, a relationship between 2D shape and the colour of their particles could be observed. For the most numerous MP group identified of multicoloured scraps, no such association was found. The results of our study can be used for further multivariate analysis regarding the presence of microplastic floating on the river surface, with a particular focus on particles of secondary origin. This is of key importance for optimising future efforts in conducting small-scale and multidimensional monitoring of and reducing plastics in the aquatic environment.

Use of pelagic tunicate Salpa fusiformis as biological sampler to estimate in-situ density of microplastics smaller than 330 μm

While microplastics (MPs) have emerged as a significant threat, information on MPs <330 μm (SMPs) is limited by the lack of simple quantification methods. We examined the potential application of salps, non-selective filter-feeding tunicates, to estimate in-situ SMP densities. After collection, salp guts were dissected, dissolved, and filtered to analyze MPs using μFTIR. The results showed each gut samples contained 1.96 ± 1.49 MP particles; their polymer composition and size were consistent with those in ambient seawater. When the SMP quantity in salp gut was converted to in-situ densities using previously published feeding parameters, SMP densities ranged between 235 and 1209 particles/m3; they were strongly correlated with those in seawater. Importantly, this method, which is less labor intensive than other methods, could easily characterize in-situ SMP distribution of different marine environments, thus improve the monitoring of their pollution. Furthermore, it could be applied to examine historical contributions of SMPs using archived salp samples.

Potential threats of microplastics and pathogenic bacteria to the immune system of the mussels Mytilus galloprovincialis

As one of the main components of marine pollution, microplastics (MPs) inevitably enter the mussel aquaculture environment. At the same time, pathogenic bacteria, especially pathogens such as Vibrio, can cause illness outbreaks, leading to large-scale death of mussels. The potential harm of MPs and pathogenic bacteria to bivalve remains unclear. This study designed two experiments (1) mussels (Mytilus galloprovincialis) were exposed to 100 particles/L or 1,000 particles/L polymethyl methacrylate (PMMA, 17.01 ± 6.74 μm) MPs and 1 × 107 CFU/mL Vibrio parahaemolyticus at the same time (14 days), and (2) mussels were exposed to 100 particles/L or 1,000 particles/L MPs for a long time (30 days) and then exposed to 1 × 107 CFU/mL V. parahaemolyticus to explore the effects of these two stresses on the mussel immune system. The results showed that after the combined exposure of V. parahaemolyticus and MPs, the lysosomal membrane stability of hemocytes decreased, lysozyme activity was inhibited, and hemocytes were induced to produce more lectins and defensins to fight pathogenic invasion. Long-term exposure to MPs caused a large amount of energy consumption in mussels, inhibited most of the functions of humoral immunity, increased the risk of mussel infection with pathogenic bacteria, and negatively affected mussel condition factor, the number of hemocytes, and the number of byssuses. Mussels may allocate more energy to deal with MPs and pathogenic bacterial infections rather than for growth. Above all, MPs exposure can affect mussel immune function or reduce its stress resistance, which in turn has an impact on mollusk farming.

Natural iron-containing minerals catalyze the degradation of polypropylene microplastics: a route to self-remediation learnt from the environment

Virgin and environmentally aged polypropylene (PP) micropowders (V-PP and E-PP, respectively) were used as reference microplastics (MPs) in comparative photo- and thermo-oxidative ageing experiments performed on their mixtures with a natural ferrous sand (NS) and with a metal-free silica sand (QS). The ferrous NS was found to catalyze the photo-oxidative degradation of V-PP after both UV and simulated solar light irradiation. The catalytic activity in the V-PP/NS mixture was highlighted by the comparatively higher fraction of photo-oxidized PP extracted in dichloromethane, and the higher carbonyl index of the bulk polymer extracted with boiling xylene, when compared with the V-PP/QS mixture. Similarly, NS showed a catalytic effect on the thermal degradation (at T = 60 °C) of E-PP. The results obtained indicate that, under suitable environmental conditions (in this case, an iron-containing sediment or soil matrix, combined with simulated solar irradiation), the degradation of some types of MPs could be much faster than anticipated. Given the widespread presence of iron minerals (including the magnetite and iron-rich serpentine found in NS) in both coastal and mainland soils and sediments, a higher than expected resilience of the environment to the contamination by this class of pollutants is anticipated, and possible routes to remediation of polluted natural environments by eco-compatible iron-based minerals are envisaged.

Photochemically induced aging of polystyrene nanoplastics and its impact on norfloxacin adsorption behavior

The co-occurrence of nanoplastics (NPs) and antibiotics in the environment is a growing concern for ecological safety. As NPs age in natural environments, their surface properties and morphology may change, potentially affecting their interactions with co-contaminants such as antibiotics. It is crucial to understand the effect of aging on NPs adsorption of antibiotics, but detailed studies on this topic are still scarce. The study utilized the photo-Fenton-like reaction to hasten the aging of polystyrene nanoplastics (PS-NPs). The impact of aging on the adsorption behavior of norfloxacin (NOR) was then systematically examined. The results showed a time-dependent rise in surface oxygen content and functional groups in aged PS-NPs. These modifications led to noticeable physical changes, including increased surface roughness, decreased particle size, and improved specific surface area. The physicochemical changes significantly increased the adsorption capacity of aged PS-NPs for norfloxacin. Aged PS-NPs showed 5.03 times higher adsorption compared to virgin PS-NPs. The adsorption mechanism analysis revealed that in addition to the electrostatic interactions, van der Waals force, hydrogen bonding, π-π* interactions and hydrophobic interactions observed with virgin PS-NPs, aged PS-NPs played a significant role in polar interactions and pore-filling mechanisms. The study highlights the potential for aging to worsen antibiotic risk in contaminated environments. This study not only enhances the comprehension of the environmental behavior of aged NPs but also provides a valuable basis for developing risk management strategies for contaminated areas.

Calcite carbonate sinks low-density plastic debris in open oceans

The vertical settling of plastic debris in oceans is poorly understood. A large share of low-density microplastics (LDMPs) are largely absent from sea surfaces. The present study employs a model that considers the potential of an overlooked microbially induced calcium carbonate precipitation (MICP) process and new motion equations for irregular LDMPs. Here we show that the motion of LDMPs in the present model, exhibiting a damped oscillation pattern, is quite different from that in biofouling models. Furthermore, LDMPs in the size range of 10-200 µm are most likely to gain sufficient density at the biofouling/MICP stage to independently sink to the ocean floor with relatively small drag coefficients, potentially explaining the selective enrichment of LDMPs in the oceanic sediment. The size and shape exhibit strong non-linear effects on the settling patterns of LDMPs. Overall, the present study highlights the importance of calcite-mediated sinking of LDMPs in open oceans.

Groundwater systems under siege: The silent invasion of microplastics and cock-tails worldwide

Microplastics (MPs) contamination is one of the significant escalating environmental concerns worldwide, and this stems from the increasing production and unlawful disposal of plastic materials. Regretfully, the synthesis of plastic materials is expected to triple in the upcoming years. Nevertheless, MPs pollution in marine, aquatic, and terrestrial settings has received much attention, unlike in groundwater systems. This study exhaustively reviewed varying degrees of recent publications in various search engines and provided a detailed state of current knowledge and research progress vis-à-vis MPs and cock-tail pollution in groundwater systems. Evidently, groundwater sources are severely contaminated as a result of growing anthropogenic activities and vertical movement of MPs and cock-tails from the atmospheric, terrestrial, and aquatic environments, however, fewer researchers have fixated their attention on estimating the occurrence of MPs in groundwater resources, while sufficient information regarding their sources, sampling methods, abundance, transport pathways, fate, modeling techniques, appropriate and adequate data, sorption properties, separation from other environmental media, toxicity, and remedial measures are extensively lacking. In addition, MPs may combine with other toxic emerging contaminants to improve migration and toxicity; however, no research has been conducted to fully understand cock-tail migration mechanisms and impacts in groundwater systems. Over time, groundwater may be regarded as the primary sink for MPs, if effective actions are neglected. Overall, this study detected a lack of concern and innumerable voids in this field; hence, vital and nascent research gaps were identified for immediate, advanced, and interdisciplinary research investigations.

Unveiling microplastics pollution in a subtropical rural recreational lake: A novel insight

While global attention has been primarily focused on the occurrence and persistence of microplastics (MP) in urban lakes, relatively little attention has been paid to the problem of MP pollution in rural recreational lakes. This pioneering study aims to shed light on MP size, composition, abundance, spatial distribution, and contributing factors in a rural recreational lake, 'Nikli Lake' in Kishoreganj, Bangladesh. Using density separation, MPs were extracted from 30 water and 30 sediment samples taken from ten different locations in the lake. Subsequent characterization was carried out using a combination of techniques, including a stereomicroscope, Fourier transform infrared spectroscopy (FTIR) and field emission scanning electron microscopy (FE-SEM). The results showed a significant prevalence of MPs in all samples, with an average amount of 109.667 ± 10.892 pieces/kg3 (dw) in the sediment and 98.167 ± 12.849 pieces/m3 in the water. Small MPs (<0.5 mm), fragments and transparent colored particles formed the majority, accounting for 80.2%, 64.5% and 55.3% in water and 78.9%, 66.4% and 64.3% in sediment, respectively. In line with global trends, polypropylene (PP) (53%) and polyethylene (PE) (43%) emerged as the predominant polymers within the MPs. MP contents in water and sediment showed positive correlations with outflow, while they correlated negatively with inflow and lake depth (p > 0.05). Local activities such as the discharge of domestic sewage, fishing waste and agricultural runoff significantly influence the distribution of polypropylene. Assessment of pollution factor, pollution risk index and pollution load index values at the sampling sites confirmed the presence of MPs, with values above 1. This study is a baseline database that provides a comprehensive understanding of MP pollution in the freshwater ecosystem of Bangladesh, particularly in a rural recreational lake. A crucial next step is to explore ecotoxicological mechanisms, legislative measures and future research challenges triggered by MP pollution.

Nanoplastic Size and Surface Chemistry Dictate Decoration by Human Saliva Proteins

Environmental pollution with plastic polymers has become a global problem, leaving no continent and habitat unaffected. Plastic waste is broken down into smaller parts by environmental factors, which generate micro- and nanoplastic particles (MNPPs), ultimately ending up in the human food chain. Before entering the human body, MNPPs make their first contact with saliva in the human mouth. However, it is unknown what proteins attach to plastic particles and whether such protein corona formation is affected by the particle's biophysical properties. To this end, we employed polystyrene MNPPs of two different sizes and three different charges and incubated them individually with saliva donated by healthy human volunteers. Particle zeta potential and size analyses were performed using dynamic light scattering complemented by nanoliquid chromatography high-resolution mass spectrometry (nLC/HRMS) to qualitatively and quantitatively reveal the protein soft and hard corona for each particle type. Notably, protein profiles and relative quantities were dictated by plastic particle size and charge, which in turn affected their hydrodynamic size, polydispersity, and zeta potential. Strikingly, we provide evidence of the latter to be dynamic processes depending on exposure times. Smaller particles seemed to be more reactive with the surrounding proteins, and cultures of the particles with five different cell lines (HeLa, HEK293, A549, HepG2, and HaCaT) indicated protein corona effects on cellular metabolic activity and genotoxicity. In summary, our data suggest nanoplastic size and surface chemistry dictate the decoration by human saliva proteins, with important implications for MNPP uptake in humans.

Synthesis and preliminary evaluation of Ag-TiO2/CNT hybrid nanocomposite for the degradation of polystyrene microplastics under solar irradiation

Currently, microplastics (MPs) are considered as emerging aqueous pollutants. However, existing methods for the separation and treatment of MPs from an aquatic environment are limited by their low efficiency. Advanced oxidation processes (AOPs) are novel techniques that employ photo-induced electron/hole pairs to generate active radicals for MP mineralization. Thus, in this study, a photocatalyst, i.e., Ag+ ion-doped TiO2, heterojunctioned with carbon nanotubes (CNT), was synthesized to study the degradation of typical MPs such as polystyrene (PS) under solar irradiation. Effectiveness of the prepared photocatalyst for the PS degradation was estimated through FESEM, FTIR, total organic carbon (TOC) analyzer, and gas chromatography-mass spectroscopy (GC-MS). Quantitatively, 31.7% degradation of PS microbeads was achieved within 48 h. Therefore, this study provides an efficient and cost-effective strategy for the degradation of MPs from the aqueous medium.

Exploring correlations between microplastics, microorganisms, and water quality in an urban drinking water source

The microplastic pollution in freshwater system is gradually becoming more severe, which has led to increasing attention on the distribution and potential harmful effects of microplastics. Moreover, microplastics may have an impact on river ecology and pose risks to ecosystems. Therefore, it is important to reveal this process. This study aimed to explore correlations between microplastics and free-living microorganisms in an urban drinking water source of Xiangjiang River by using multivariate statistical analysis. The results indicated that the abundance of microplastics (size 50 μm to 5 mm) in surface water and sediments ranged from 0.72 to 18.6 (mean ± SD: 7.32 ± 2.36) items L-1 and 26.3-302 (150 ± 75.6) items kg-1 dry weight (dw), respectively, suggesting potential microplastic pollution despite the protected status as a drinking water source. Higher microplastic abundances were observed in urban areas and the downstream of wastewater plants, with mostly granular shape, transparent and black color as well as 50-100 μm in size. The multivariate statistical analysis presented that the abundance of microplastics is not significantly correlated with water indicators, due to the complexity of the abundance data. The water indicators showed an obvious correlation with microplastics in colors of transparent and black, and smaller sizes of 50-100 μm. This is also true for microplastics and microorganisms in water and sediment. Proteobacteria was the main prokaryote in water and sediments, being positively correlated with 50-100 μm microplastics; while Chloroplastida was the dominated eukaryotes, presenting a weak correlation with smaller-size microplastics. Overall, when considering the properties of microplastics such as shape, color and size, the potential correlations with water indicators and microorganisms were more evident than abundance. This study provides new insights into the multivariate statistical analysis, explaining the potential correlations among microplastic properties, microorganisms and environmental factors in a river system.

Microplastic generation from field-collected plastic gauze: Unveiling the aging processes

Accumulation of plastic debris in the environment is a matter of global concern. As plastic ages, it generates microplastic (MP) particles with high mobility. Understanding how MPs are generated is crucial to controlling this emerging contaminant. In this study, we utilized high-density polyethylene (HDPE) plastic gauze, collected from urban settings, as a representative example of plastic waste. The plastic gauze was subjected to various aging conditions, including freeze-thaw cycling, mechanical abrasion, and UV irradiation. Following aging, the plastic gauze was rinsed with water, and the number of generated MPs were quantified. It was found that aged plastic gauze generated up to 334 million MP particles per m2 (> 10 µm) during rinsing, a number two orders of magnitude higher than unaged plastic. Fragmentation occurred in two dimensions for bulk MPs of all morphotypes. However, specific aging approaches (i.e., mechanical abrasion and UV irradiation) generated spheres and fibers via pseudo-3D fragmentation. Additionally, changes in molecular weight, size distribution, and surface oxidation characteristics unveiled a complex pattern (i.e., irregular changes with exposure time). This complexity underscores the intricate nature of plastic debris aging processes in the environment.

New insights into the concentration-dependent regulation of membrane biofouling formation via continuous nanoplastics stimulation

The release of nanoplastics (NPs) into the environment is growing due to the extensive use of plastic products. Numerous studies have confirmed the negative effects of NPs on microorganisms, which poses uncertainties concerning their impact on nanofiltration (NF) membrane biofouling. This study investigated the initial cell adhesion process, NF membrane biofouling kinetic processes and bacterial responses of Pseudomonas aeruginosa (P. aeruginosa) exposed to varied NPs concentrations (0-50 mg·L-1). Transcriptome analysis demonstrated that low concentration of NPs (0.1 mg·L-1) promoted bacterial quorum sensing, energy metabolism, exopolysaccharide biosynthesis and bacterial secretion systems. Correspondingly, the polysaccharide content increased remarkably to 2.77 times the unexposed control, which served as a protective barrier for bacteria to avoid the impact of NPs-induced stress. Suppressed homologous recombination, microbial metabolic potentials and flagellar assembly were detected in bacteria exposed to a high concentration (50 mg·L-1) of NPs, mainly due to the triggered reactive oxygen species (ROS) generation, genomic DNA damage, and decreased energy production. Overall, enhanced formation of the extracellular polymeric substances (EPS) and aggravated membrane flux decline were observed when NPs interacted with the membrane surface by cell secretions (low NPs levels) or cell lysis (high NPs levels). These findings shed light on understanding the microbial metabolism mechanism and membrane biofouling propensity with NPs stress at both the molecular and gene levels.

Differential scanning calorimetry (DSC): An important tool for polymer identification and characterization of plastic marine debris

Differential scanning calorimetry (DSC), a routine thermoanalytical method in material science, is gaining utility in plastic pollution research to improve polymer identification. We optimized a DSC method, experimentally testing pan types, temperature ramps, number of melts, and minimum sample masses. Using the optimized method, we created an in-house thermogram library from 201 polymer reference standards. We determined peak melting temperature cutoffs for differentiating variants of PE and nylon. PE cutoffs remained stable after experimentally weathering standards outdoors or for severely weathered HDPE debris found on Hawaii's beaches. Marine debris samples, across a range of weathering severity and previously identified as either low-density or high-density polyethylene (LDPE or HDPE) based on the 1377 cm-1 peak indicating methyl groups by attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FTIR), were analyzed by DSC to confirm or challenge the ATR-FTIR PE differentiation. ATR-FTIR was correct for >80% of the HDPE samples, but <40% of those initially identified as LDPE by ATR-FTIR. Accuracy did not relate to weathering extent. Most samples mis-identified as LDPE were HDPE that had formed methyl groups likely from chain scission during photooxidation. ATR-FTIR alone is unreliable for differentiating weathered PE, DSC is required. We provide a multiple-method workflow for complete and accurate polymer identification, even for microplastics ≥0.03 mg. Applying these methods can better identify the polymer composition of marine debris, essential for sourcing and recycling efforts.

Microorganism-mediated biodegradation for effective management and/or removal of micro-plastics from the environment: a comprehensive review

Micro- plastics (MPs) pose significant global threats, requiring an environment-friendly mode of decomposition. Microbial-mediated biodegradation and biodeterioration of micro-plastics (MPs) have been widely known for their cost-effectiveness, and environment-friendly techniques for removing MPs. MPs resistance to various biocidal microbes has also been reported by various studies. The biocidal resistance degree of biodegradability and/or microbiological susceptibility of MPs can be determined by defacement, structural deformation, erosion, degree of plasticizer degradation, metabolization, and/or solubilization of MPs. The degradation of microplastics involves microbial organisms like bacteria, mold, yeast, algae, and associated enzymes. Analytical and microbiological techniques monitor microplastic biodegradation, but no microbial organism can eliminate microplastics. MPs can pose environmental risks to aquatic and human life. Micro-plastic biodegradation involves fragmentation, assimilation, and mineralization, influenced by abiotic and biotic factors. Environmental factors and pre-treatment agents can naturally degrade large polymers or induce bio-fragmentation, which may impact their efficiency. A clear understanding of MPs pollution and the microbial degradation process is crucial for mitigating its effects. The study aimed to identify deteriogenic microorganism species that contribute to the biodegradation of micro-plastics (MPs). This knowledge is crucial for designing novel biodeterioration and biodegradation formulations, both lab-scale and industrial, that exhibit MPs-cidal actions, potentially predicting MPs-free aquatic and atmospheric environments. The study emphasizes the urgent need for global cooperation, research advancements, and public involvement to reduce micro-plastic contamination through policy proposals and improved waste management practices.

Sunlight-Driven Photochemical Removal of Polypropylene Microplastics from Surface Waters Follows Linear Kinetics and Does Not Result in Fragmentation

Floating microplastics are susceptible to sunlight-driven photodegradation, which can convert plastic carbon to dissolved organic carbon (DOC) and can facilitate microplastic fragmentation by mechanical forces. To understand the photochemical fate of sub-millimeter buoyant plastics, ∼0.6 mm polypropylene microplastics were photodegraded while tracking plastic mass, carbon, and particle size distributions. Plastic mass loss and carbon loss followed linear kinetics. At most time points DOC accumulation accounted for under 50% of the total plastic carbon lost. DOC accumulation followed sigmoidal kinetics, not the exponential kinetics previously reported for shorter irradiations. Thus, we suggest that estimates of plastic lifespan based on exponential DOC accumulation are inaccurate. Instead, linear plastic-C mass and plastic mass loss kinetics should be used, and these methods result in longer estimates of photochemical lifetimes for plastics in surface waters. Scanning electron microscopy revealed that photoirradiation produced two distinct patterns of cracking on the particles. However, size distribution analyses indicated that fragmentation was minimal. Instead, the initial population of microplastics shrank in size during irradiations, indicating photoirradiation in tranquil waters (i.e., without mechanical forcing) dissolved sub-millimeter plastics without fragmentation.

New versus naturally aged greenhouse cover films: Degradation and micro-nanoplastics characterization under sunlight exposure

The understanding of microplastic degradation and its effects remains limited due to the absence of accurate analytical techniques for detecting and quantifying micro- and nanoplastics. In this study, we investigated the release of nanoplastics and small microplastics in water from low-density polyethylene (LDPE) greenhouse cover films under simulated sunlight exposure for six months. Our analysis included both new and naturally aged (used) cover films, enabling us to evaluate the impact of natural aging. Additionally, photooxidation effects were assessed by comparing irradiated and non-irradiated conditions. Scanning electron microscopy (SEM) and nanoparticle tracking analysis (NTA) confirmed the presence of particles below 1 μm in both irradiated and non-irradiated cover films. NTA revealed a clear effect of natural aging, with used films releasing more particles than new films but no impact of photooxidation, as irradiated and non-irradiated cover films released similar amounts of particles at each time point. Raman spectroscopy demonstrated the lower crystallinity of the released PE nanoplastics compared to the new films. Flow cytometry and total organic carbon data provided evidence of the release of additional material besides PE, and a clear effect of both simulated and natural aging, with photodegradation effects observed only for the new cover films. Finally, our results underscore the importance of studying the aging processes in both new and used plastic products using complementary techniques to assess the environmental fate and safety risks posed by plastics used in agriculture.

Toxic effects on ciliates under nano-/micro-plastics coexist with silver nanoparticles

Owing to the degradation of plastics, microplastics (MPs) and nanoplastics (NPs) have remained the focus of global attention. Silver nanoparticles (AgNPs) could adversely affect marine organisms due to their broad application. So far, the combined effects of MPs/NPs (strong adsorbents) with AgNPs on marine organisms are scant. Thus, four sizes polystyrene beads (80 nm, 220 nm, 1.07 µm, and 2.14 µm) combined with AgNPs (30 nm) were assessed using ciliated protozoa Uronema marinum. Results showed that MPs/NPs dramatically decrease the abundance, biovolume, and carbon biomass of U. marinum. And, exposure could cause changes of antioxidant enzyme activity and antioxidant content on U. marinum. The combined toxicity of MPs/NPs with AgNPs to ciliates showed an enhanced effect compared to exposure alone. Additionally, the negative effects under exposure of NPs plus AgNPs were more significant than those of MPs plus AgNPs. Transcriptome sequencing showed that co-exposure could affect the energy metabolism and lipid metabolism of ciliates, even cause DNA and protein damage. Our study provided a novel insight and first-hand basic data for the understanding of combined toxicity of MPs /NPs with AgNPs on the basic trophic level ciliated protozoa in marine ecosystems.

Polystyrene microplastics photo-aged under simulated sunlight influences gonadal development in the Pacific oyster

Microplastics (MPs) aging in natural ecosystems are caused by solar irradiation. Photo-aged MPs in aquatic systems are a major threat to molluscs. In this study, polystyrene (PS) photo-aging was simulated using a sunlight simulator. After exposure of Crassostrea gigas to photo-aged PS, a decreased gonadosomatic index, coupled with histological alterations, suggested an inhibitory effect on the gonadal development of bivalves. As the concentration of aged PS increased, the inhibitory effects on gonadal development became more severe. The sex hormone (testosterone and estradiol) and energy metabolism (glycogen, lipid, and protein content) differences between C. gigas males and females suggested a disruption of sex hormonal homeostasis and a shift in energy allocation strategy, which may have affected reproduction, especially female oysters. In addition, the substantial downregulation of SOX-8, SOX-E, Piwi1, and TGF-β genes may be contributing factors causing the inhibitory effect of aged PS on the gonadal development of C. gigas. This study provides an essential reference for evaluating the reproductive health risks posed by aged MPs and offers novel insights and perspectives for exploring the impact of MPs under natural conditions.

Enhanced reproductive toxicity of photodegraded polylactic acid microplastics in zebrafish

Microplastics are widely used due to their numerous advantages. However, they can have detrimental effects on marine ecosystems. When microplastics enter the ocean, they can be absorbed by marine organisms, leading to toxic effects. Additionally, the transformation of microplastics during natural degradation can alter their toxicity, necessitating further investigation. Polylactic acid (PLA) biodegradable plastics are commonly used, yet research on their toxicity, particularly their reproductive effects on aquatic organisms, remains limited. In this study, we conducted photodegradation of PLA using potassium persulfate as a catalyst to simulate natural degradation conditions. Our objective was to assess the reproductive toxicity of photodegraded PLA microplastics on zebrafish. The results revealed that photodegraded PLA exhibited elevated reproductive toxicity, resulting in abnormal oocyte differentiation, disruption of sexual hormone levels, and alterations in ovarian tissue metabolism. Metabolomics analysis indicated that both unphotodegraded PLA (UPLA) and photodegraded PLA (DPLA) disrupted oxidative stress homeostasis in zebrafish ovarian tissue by influencing pathways such as purine metabolism, phenylalanine metabolism, glutathione metabolism, and riboflavin metabolism. Furthermore, the DPLA treatment induced abnormal biosynthesis of taurocholic acid, which was not observed in the UPLA treatment group. Importantly, the DPLA treatment group exhibited more pronounced effects on offspring development compared to the UPLA treatment group, characterized by higher mortality rates, inhibition of embryo hatching, accelerated heart rates, and reduced larval body length. These findings underscore the varying levels of toxicity to zebrafish ovaries before and after PLA photodegradation, along with evidence of intergenerational toxicity.

Recognition and detection technology for microplastic, its source and health effects

Microplastic (MP) is ubiquitous in the environment which appeared as an immense intimidation to human and animal health. The plastic fragments significantly polluted the ocean, fresh water, food chain, and other food items. Inadequate maintenance, less knowledge of adverse influence along with inappropriate usage in addition throwing away of plastics items revolves present planet in to plastics planet. The present study aims to focus on the recognition and advance detection technologies for MPs and the adverse effects of micro- and nanoplastics on human health. MPs have rigorous adverse effect on human health that leads to condensed growth rates, lessened reproductive capability, ulcer, scrape, and oxidative nervous anxiety, in addition, also disturb circulatory and respiratory mechanism. The detection of MP particles has also placed emphasis on identification technologies such as scanning electron microscopy, Raman spectroscopy, optical detection, Fourier transform infrared spectroscopy, thermo-analytical techniques, flow cytometry, holography, and hyperspectral imaging. It suggests that further research should be explored to understand the source, distribution, and health impacts and evaluate numerous detection methodologies for the MPs along with purification techniques.

Leaching of heavy metals from polyester microplastic fibers and the potential risks in simulated real-world scenarios

Heavy metals have been incorporated as additives into synthetic textiles to enhance their functional properties. However, these fibers are susceptible to shedding due to mechanical wear, and the release of heavy metals from microplastic fibers (MFs) remains largely uncharacterized. Therefore, this study sought to quantify the levels of heavy metals in textiles, evaluate their leaching capabilities under various scenarios, and ultimately assess the potential health risks associated with MFs ingestion. First, we determined the metal content in eight commonly used polyester textiles. Subsequently, we estimated the metal leaching capacities of specific MFs sourced from carpets, curtains, sweaters, and scarves in freshwater, human saliva, human lung fluid, and fish gastric fluid at distinct time intervals. The results indicated that carpets contained the highest amount of total metals, with a concentration of 218 ± 8 mg/kg. Ultraviolet weathering, coupled with longer exposure durations, led to surface coarsening of MFs, which may be the primary reason for the enhanced leaching of metals in freshwater. Furthermore, our findings revealed that carbonyl index was unsuitable for characterizing aging because polyester inherently contains carbonyl groups. Instead, the O/C ratio emerged as a more suitable indicator. The leached concentrations and percentages of metals from MFs exhibited the following order in biofluids: Sb>Mn>Cr and Cr>Mn>Pb in biofluids, respectively. Finally, the estimated daily intake of metals was significantly below the tolerable thresholds (0.0014-0.14 mg/kg/d for fish and 0.0036-1.0 mg/kg/d for humans), indicating a negligible risk of heavy metal exposure through MFs for both fish and humans. ENVIRONMENTAL IMPLICATION: In recent years, the ecological risks posed by heavy metal contaminants loaded onto microplastic fibers have become an increasing concern. Therefore, our study sought to characterize the accumulation of heavy metals on plastic fabrics and the potential for these loaded heavy metals to be released when microplastic fibers originating from these fabrics enter freshwater environments and interact with organisms. This vector-like behavior underscores the importance of investigating the ecological hazards associated with microplastic fibers carrying contaminants in both environmental and organismal contexts.

The path of microplastics through the rare biodiversity estuary region of the northern Bay of Bengal

Due to its harmful effects on ecosystems and human health, microplastic (MP) pollution has become a significant environmental problem on a global scale. Although MPs' pollution path and toxic effects on marine habitats have been examined worldwide, the studies are limited to the rare biodiversity estuary region of Hatiya Island from the northern Bay of Bengal. This study aimed to investigate the MP pollution path and its influencing factors in estuarine sediments and water in rare biodiversity Hatiya Island in the northern Bay of Bengal. Sixty water and sediment samples were collected from 10 sampling sites on the Island and analyzed for MPs. The abundance of MPs in sediment ranged from 67 to 143 pieces/kg, while the abundance in water ranged from 24.34 to 59 pieces/m3. The average concentrations of MPs in sediment and water were 110.90 ± 20.62 pieces/kg and 38.77 ± 10.09 pieces/m3, respectively. Most identified MPs from sediment samples were transparent (51%), while about 54.1% of the identified MPs from water samples were colored. The fragment was the most common form of MP in both compartments, with a value of 64.6% in sediment samples and 60.6% in water samples. In sediment and water samples, almost 74% and 80% of MP were <0.5 mm, respectively. Polypropylene (PP) was the most abundant polymer type, accounting for 51% of all identified polymers. The contamination factor, pollution load index, polymer risk score, and pollution risk score values indicated that the study area was moderately polluted with MPs. The spatial distribution patterns and hotspots of MPs echoed profound human pathways. Based on the results, sustainable management strategies and intervention measures were proposed to reduce the pollution level in the ecologically diverse area. This study provides important insights into evaluating estuary ecosystem susceptibility and mitigation policies against persistent MP issues.

Preparation and application of metal-modified biochar in the purification of micro-polystyrene polluted aqueous environment

Microplastics (MPs) have already spread across the globe and have been found in drinking water and human tissues. This may pose severe threats to human health and water environment. Therefore, this study accurately evaluated the removal effect of metal-modified biochar on polystyrene microplastics (PS-MPs) (1.0 μm) in the water environment using a high-throughput fluorescence quantification method. The results indicated that Fe-modified biochar (FeBC) and Fe/Zn-modified biochar (Fe/ZnBC) had good removal efficiencies for PS-MPs under the dosage of 3 g/L, which were 96.24% and 84.77%, respectively. Although pore effects were observed (such as "stuck", "trapped"), the electrostatic interaction was considered the main mechanism for the adsorption of PS-MPs on metal-modified biochar, whereas the formation of metal-O-PS-MPs may also contribute to the adsorption process. The removal efficiency of PS-MPs by FeBC was significantly reduced under alkaline conditions (pH = 9 and 11) or in the presence of weak acid ions (PO43-, CO32-, HCO3-). A removal efficiency of 72.39% and 78.33% of PS-MPs was achieved from tap water (TW) and lake water (LW) using FeBC when the initial concentration was 20 mg/L. However, FeBC had no removal effect on PS-MPs in biogas slurry (BS) and brewing wastewater (BW) due to the direct competitive adsorption of high concentrations of chemical oxygen demand (COD). The findings of this study highlighted that metal-modified biochar had a potential application in purifying tap water or lake water which contaminated by MPs.

The molecular level degradation state of drift plastics in the Sea of Japan coastline

Polyethylene (PE) and polyethylene terephthalate (PET) are among the most abundant plastics polluting the oceans. However, their environmental fate depends on how they have been weathered. Due to its unique geography, the Sea of Japan is a pollution hotspot where plastics accumulate. In this study, the structures of plastics, having drifted into the Sea of Japan coastline environment, were analyzed with a particular focus on examining polymer crystallization and carbonyl formation; two factors which influence microplastic formation and the adsorption of contaminants onto plastic surfaces. PE in the coastal environment did not show evidence of crystallization, although carbonyl formation did increase. By contrast, PET bottles were shown to not be uniform in structure, with unaged bottles being less crystalline in the neck component compared to the body. Because of this difference, in environmental PET bottles, it was the bottle neck that showed increases in crystallization and carbonyl group formation.

Photocatalytic degradation of polyethylene and polystyrene microplastics by α-Fe2O3/g-C3N4

This study investigated the photodegradation of microplastics (MPs) by α-Fe2O3/g-C3N4. The effects of α-Fe2O3/g-C3N4 on MPs' surface were investigated through various techniques. With the addition of α-Fe2O3/g-C3N4 and under visible light irradiation, cracks and folds were observed on the MP films and particles. Compared to the treatment without photocatalyst addition, the mass loss of MPs increased with irradiation time when α-Fe2O3/g-C3N4 was added. Specifically, polystyrene films and particles in water showed 9.94% and 7.81% increased mass loss, respectively. The degradation of MPs using α-Fe2O3/g-C3N4 demonstrated the behavior consistent with the pseudo-first-order kinetic model. The presence of α-Fe2O3/g-C3N4 led to an increase in surface oxygen-containing functional groups and crystallinity while decreasing the average molecular weight of MPs. After 30 days of irradiation, the characteristic tensile bands of MPs with α-Fe2O3/g-C3N4 significantly increased, and the detection of carboxyl bands indicated the formation of carboxylic acid, ketones, and lactones as degradation products.

Role of water shear force for microplastics fragmentation into nanoplastics

Wastewater treatment plants (WWTPs) are major recipients of microplastics (MPs) that break down into nanoplastics (NPs) during wastewater treatment through physical, chemical, and biological processes. In particular, mechanical stress induced by the mixing process commonly used in WWTPs is thought to play a crucial role in the production of secondary MPs/NPs, which are then discharged into the open water environment through the WWTP effluent. This study investigated the fragmentation of 250 and 106 μm-sized pristine and weathered polystyrene (PS) particles using a four-blade mechanical impeller. At an energy density level of 100 kJ/L, the 250 and 106 μm-sized pristine PS particles were broken down into mean sizes of 120.6 ± 19.1 and 95.6 ± 16.8 nm, respectively. The smallest sizes were found to be 90.9 ± 17.8 and 72.4 ± 19.6 nm due to the breakdown of 250 and 106 μm-sized weathered PS particles, respectively. The morphology of the PS particles after fragmentation also demonstrated the initiation of surface damage, such as cracks, pores and rough structures. This surface crack propagation, caused by mechanically induced water shear force, was identified as the primary mechanism of MP fragmentation into NPs. It was also found that NP levels significantly increased after 40 min of mixing, with at least a 28-fold increase in water solution at an energy density of 32 kJ/L. These results clearly show that the breakdown of MPs into NPs is a continuous process during wastewater treatment, posing a significant threat to the water environment through NP release by WWTP effluents.

Toxic effects of aging mask microplastics on E. coli and dynamic changes in extracellular polymeric matter

Contamination of disposable medical masks has become a growing problem globally in the wake of Covid-19 due to their widespread use and improper disposal. Three different mask layers, namely the outer layer, the meltblown (MB) filler layer and the inner layers release three different types of microplastics, whose physical and chemical properties change after prolonged environmental weathering. In this study, physical and chemical changes of mask microplastics before and after aging were characterized by different characterization techniques. The toxic effect and mechanism of aged mask microplastics on Escherichia coli (E. coli) were studied by measuring the growth inhibition of mask microplastics, the change in ATPase activity, the change in malondialdehyde content and reactive oxygen species production, and the release of the chemical composition of exopolymeric substances (EPS). The microplastics of the aged MB filter layer had the most significant inhibitory effect on E. coli growth, reaching 19.2 % after 36 h. Also, under the influence of mask microplastics, ATPase activity of E. coli was inhibited and a large amount of EPS was released. The chemical composition of EPS has also changed. This study proposed the possible toxicity mechanism of mask microplastics and the self-protection mechanism of E. coli, and provided a reference for future research on the toxic effects of mask microplastics on environmental organisms.

Modeling impacts of river hydrodynamics on fate and transport of microplastics in riverine environments

Microplastics pose a significant and growing threat to marine ecosystems and human health. Rivers serve as critical pathways for the entry of inland-produced microplastics into marine environments. In this paper, we developed a numerical modeling scheme using OpenFOAM to investigate the fate and transport of microplastics in a river system. Our simulation results show that microplastics undergo significant aggregation and breakage as they are transported downstream by river flows. This significantly alters the particle size distribution of microplastics. The aggregation-breakage process is mainly controlled by river hydrodynamics and pollution scale. Our findings suggest that a significant extent of particle aggregation occurs at an early stage of the release of microplastics in the river, while the aggregation-breakage process becomes limited as the microplastic plume is gradually dispersed and diluted downstream. Eddy diffusivity drives the dispersion of the microplastic plume in the river, and its spatial patterns affect the aggregation-breakage process.

The aging of polyethylene mulch films in the presence of cadmium

To determine the fates of the persistent pollutants cadmium (Cd) and micro-plastics in agricultural soils, an in-depth understanding of the interactions between Cd and mulching film is required. In the present work, pot experiments are conducted under natural conditions to study the influence of various Cd concentrations on the aging process of polyethylene mulching film in soil collected from Changzhi, Shanxi Province. The results indicate that during 150 days, the aging degree of the mulch film increases gradually as the increased Cd concentration in the soil. Further, the results of attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectrometry and X-ray photoelectron spectroscopy (XPS) demonstrate that the average vinyl index (VI) of the aging mulch film increases from 1.29 to 1.82, while the oxygen-to-carbon (O/C) ratio of the mulch film decreases significantly from 0.344 to 0.045, as the Cd concentration is increased from 0 to 10 mg kg-1. When the aging time exceeds 90 days, the oxygen-containing functional groups (C-O and CO) generated consumed by the adsorbed Cd. In addition, electron paramagnetic resonance (EPR) measurements indicate that Cd both enhances the formation of hydroxyl radical (·OH) on the surface of the mulch film and prevents the combination of ·OH and electrons, thereby accelerating the aging of the mulch. Hence, the present study indicates that the presence of Cd will hasten the decomposition of mulch, which will inevitably result in the faster release of micro-plastics from the mulch into the soil environment.

Macroplastic fragmentation in rivers

The process of macroplastic (>0.5 cm) fragmentation results in the production of smaller plastic particles, which threaten biota and human health and are difficult to remove from the environment. The global coverage and long retention times of macroplastic waste in fluvial systems (ranging from years to centuries) create long-lasting and widespread potential for its fragmentation and the production of secondary micro- and nanoplastics. However, the pathways and rates of this process are mostly unknown and existing experimental data not fully informative, which constitutes a fundamental knowledge gap in our understanding of macroplastic fate in rivers and the transfer of produced microparticles throughout the environment. Here we present a conceptual framework which identifies two types of riverine macroplastic fragmentation controls: intrinsic (resulting from plastic item properties) and extrinsic (resulting from river characteristics and climate). First, based on the existing literature, we identify the intrinsic properties of macroplastic items that make them particularly prone to fragmentation (e.g., film shape, low polymer resistance, previous weathering). Second, we formulate a conceptual model showing how extrinsic controls can modulate the intensity of macroplastic fragmentation in perennial and intermittent rivers. Using this model, we hypothesize that the inundated parts of perennial river channels-as specific zones exposed to the constant transfer of water and sediments-provide particular conditions that accelerate the physical fragmentation of macroplastics resulting from their mechanical interactions with water, sediments, and riverbeds. The unvegetated areas in the non-inundated parts of perennial river channels provide conditions for biochemical fragmentation via photo-oxidation. In intermittent rivers, the whole channel zone is hypothesized to favor both the physical and biochemical fragmentation of macroplastics, with the dominance of the mechanical type during the periods with water flow. Our conceptualization aims to support future experimental and modelling works quantifying plastic footprint of different macroplastic waste in different types of rivers.

Laboratory Studies about Microplastic Aging and Its Effects on the Adsorption of Chlorpyrifos

The constant change in microplastics (MP) due to exposure to environmental conditions leads to physical and chemical changes that enhance their ability to transport other pollutants, increasing the concern about their widespread presence in the environment. This work aimed to simulate the aging process of six MP (polyamide 6, unplasticized polyvinyl chloride, low-density polyethylene, polystyrene, polyethylene-co-vinyl acetate, polypropylene) in freshwater and seawater ecosystems at laboratory scale and evaluate its effects through optical microscope observation, Fourier transform infrared spectroscopy-Attenuated Total Reflectance (FTIR-ATR), Raman spectroscopy, and thermal gravimetric analysis (TGA). Through a combined experimental study of aged MP, the degradation by UV interaction was evidenced by the appearance of new infrared bands in the FTIR spectra assigned to ketones and hydroxyl groups. While Raman analysis and microscope images reveal the appearance of pores, wrinkles, and roughness in the MP surfaces. Variations in the temperature of the maximum weight loss of the MP were observed in the TGA analysis. The adsorption of chlorpyrifos (CPF), a common pesticide widely used in agriculture, by the pristine and aged MP was also studied. The highest affinity for CPF was observed for pristine LDPE and the lowest for PP. The batch adsorption studies revealed an increase in adsorption capacity as a consequence of the aging process for both MP. These results proved that the weathering effects caused changes in the behavior of MP, namely in the interaction with other pollutants.

Effects of Digestion, Cell Culture Media, and Mucous on the Physical Properties, Cellular Effects, and Translocation of Polystyrene and Polymethacrylate Nanoparticles

The discovery of plastic and metal nanoparticles in organisms, foods, and beverages has generated numerous studies on the effects of these particles on the barrier cells and their subsequent absorption into the body. Following ingestion, nanoparticles travel down the gastrointestinal tract (GIT), and their physicochemical characteristics change in response to the change in proteins and pH during their digestion. We measured the translocation of digested nanoparticles across a co-culture monolayer of Caco-2 and various combinations (1:9, 5:5, and 9:1) of HT29-MTX-E12. The in vitro model of the intestine was used to determine the translocation of digested 20 nm polymethacrylate (PMA) particles and the accompanying monolayer barrier effects after a 72 h exposure. The in vitro digestion increased the agglomeration and hydrodynamic diameters and decreased the surface charge of the nanoparticles. For NH2-functionalized polymethacrylate nanoparticles (PMA-NH2), the diameters increased from 57 nm (water) to 3800 nm (media), or 2660 nm (chyme). These nanoparticles compromised the integrity of the monolayer (trans-epithelial electrical resistance, Lucifer yellow translocation) and translocated across all the cell ratio configurations. Digestion can have a large effect on nanoparticle agglomeration and surface charge. Excess mucous was not seen as a barrier to the translocation of PMA-NH2.

Spatial distribution and historical trend of microplastic pollution in sediments from enclosed bays of South Korea

Seafloor sediments are an important sink for microplastics (MPs), and the vertical profile of MP accumulation in a sediment core represents historical pollution trends. In this study, MP (20-5000 μm) pollution in surface sediments of urban, aquaculture, and environmental preservation sites in South Korea was evaluated, and the historical trend was investigated using age-dated core sediments from the urban and aquaculture sites. The abundance of MPs ranked in the order of urban, aquaculture, and environmental preservation sites. Polymer types were more diverse at the urban site compared to other sites, and expanded polystyrene was dominant in the aquaculture site. An increase in MP pollution and polymer types was observed from bottom to top of cores, and historical trends of MP pollution reflect local influences. Our results indicate that the characteristics of MPs are determined by human activities, and MP pollution should be addressed according to the characteristics of each site.

Aging behavior of microplastics accelerated by mechanical fragmentation: alteration of intrinsic and extrinsic properties

Microplastics (MPs) inevitably undergo multiple aging processes during their life cycle in the environment. However, the information regarding the mechanical fragmentation behavior of MPs remained unclear, including the changes in the intrinsic properties of aged MPs, the measurement of aging degree, the underlying mechanism, and the interaction with heavy metals. Here, MPs (PS, PP, PET) were aged by crushing (-CR) and ball-milling (-BM) to simulate mild and severe mechanical fragmentation, respectively. Our results indicated that mechanical fragmentation significantly affected the morphology of MPs. The aging degree of MP-BM was deeper compared to MP-CR owing to smaller particle size, larger specific surface area, poorer heat resistance, better hydrophilicity, and richer oxygen-containing functional groups. The carbonyl index (CI) and O/C ratio were used to measure the aging degree of the two mechanical aging treatments. Besides, the mechanism was proposed and the discrepancy between the two treatments was elaborated from three aspects including the excitation energy source, reaction interface, and reaction dynamics. Furthermore, the extrinsic properties of MPs altered with the increase of aging degree; specifically, the adsorption capacities of heavy metals were enhanced. Meanwhile, it was unveiled that the CI value and O/C ratio played a vital role in estimating the adsorption ability of heavy metals. The findings not only reveal the mechanical fragmentation behavior of MPs but also provide new insights into the assessment of the potential risks of the aged MPs via chemical indexes.

Endocrine disruptor responses in the embryos of marine medaka (Oryzias melastigma) after exposure to aged plastic leachates

The issue of the additives leached from plastics has attracted widespread attention. More crucially, endocrine disruptor status for several leached additives has been established. However, little is known about the overall endocrine disrupting effects of aged plastic leachates. Therefore, the transcriptional responses of endocrine-related genes were assessed in the embryos of marine medaka (Oryzias melastigma), which were exposed to the leachates from aged plastics that were immersed into the simulated seawater (SW) or fish digest (FD). The results revealed that there was a great difference between the SW and FD leachates in the transcripts of endocrine-related genes. With the exception of cyp1a, all target genes had their transcripts potentially down-regulated by the FD leachates. Chgl (a biomarker for estrogens), pparβ (related to lipid metabolism), and cyp19a (related to sexual differentiation and reproduction) transcripts tended to be repressed by the SW leachates, while pparα, pparγ and cyp1a (mediating metabolism of xenobiotics) transcripts were stimulated. In addition, a redundancy analysis was carried out to determine the relationship between the leached additives and the transcriptional changes. However, the additives only partially explained the variation in the transcripts of endocrine-related genes (24.8%), indicating that other leached additives may have an impact on target gene transcription. This study provided molecular evidence of the aged plastic leachates' endocrine disrupting effects. Exploring the primary factors that affect the transcriptional alterations would require more research.

Fragmentation of nano- and microplastics from virgin- and additive-containing polypropylene by accelerated photooxidation

Plastic is ubiquitous in the environment, where it gradually weathers and fragments into nanoplastics (NPs) and microplastics (MPs); however, the weathering process and fragmentation rate are poorly understood. In this study, we quantitatively determined the abundances and size distributions of NPs and MPs produced from virgin polypropylene (PP) and additive-containing PP (PPa) sheets via photooxidation with water in a simulated sunlight chamber followed by vortexing. The fragmentation rate of PP and PPa were approximately 1.1 × 108 particles/cm2 and 1.0 × 108 particles/cm2, respectively, during 176 days of exposure in the chamber (corresponding to 2.7 years of exposure in an outdoor environment in the Republic of Korea). However, quadratic regression analysis of the relationship between total particles produced and exposure duration revealed that the PP fragmentation rate was faster than the PPa fragmentation rate after a sunlight exposure duration equivalent to 2.7 years. Furthermore, the mechanical stress of vortexing after photooxidation played an important role in the production of MPs; it had a smaller role in the production of NPs. The sizes of fragmented particles produced by photooxidation and mechanical stress followed a power law distribution, with a scaling exponent of α = 2.87 ± 0.15, which was similar to a three-dimensional fragmentation pattern. This study provides valuable insights into the weathering and fragmentation processes of plastics. Further studies on the environmental fate and impact of NP and MP production from plastic weathering and fragmentation, as well as the potential influence of plastic additives on these processes.

Leaching of herbicides mixtures from pre-exposed agricultural plastics severely impact microalgae

Farmlands represent a source of aged plastics and pesticides to the surrounding environments. It has been shown that chemicals can be sorbed and desorbed from plastics, but the interaction between plastic and mixtures of pesticides and their effects on freshwater biota has not been assessed yet. The aim of the work was to assess the potential role of agricultural plastics as vectors for a mixture of two herbicides and the impact of the herbicide mixture lixiviated from them towards the freshwater microalga Chlamydomonas reinhardtii. Pristine and aged polyethylene plastics collected from agricultural areas were exposed to the herbicides, bifenox, oxyfluorfen and their mixtures. The microalgae were exposed for 72 h to the leachates desorbed from plastics and the effect was quantified in terms of total chlorophyll content and several physiological parameters assessed by flow cytometry. Our results showed that changes in physicochemical properties (hydroxyl and carbonyl index, hydrophobicity, texture) in aged plastics increased their capacity to retain and to desorb the herbicides. Microalgae exposed to leachates containing bifenox, oxyfluorfen, or their mixture showed reactive oxygen species overproduction, lipid peroxidation, membrane potential hyperpolarization, intracellular pH acidification, and a loss of metabolic activity. The toxicological interactions of the leachate mixture were assessed using the Combination Index (CI)-isobologram method showing antagonism at low effect levels turning to synergism when the effect increased. In this work, we proved the hypothesis that ageing increases the capacity of agricultural plastics to behave as vector for toxic chemicals to the biota.

Microplastics in surface water of the Bay of Asunción, Paraguay

This study identified and quantified microplastics in the Bay of Asunción, Paraguay, and its main tributaries. Surface water samples were sieved in duplicate at six locations using stainless-steel sieves (0.3-4.75 mm range), digested employing the Fenton's reaction (Fe-catalysed H₂O₂ digestion), and floated using NaCl and NaI. Particles were inspected using a microscope and characterized by IR spectrometry. Microplastics were found in all samples; more abundant (p < 0.05) in water from the bay (13.2 ± 13.4 items·m^-3) than from the tributaries (1.0 ± 0.5 items·m^-3). Most microplastics were common polymers and their abundance was in the order polypropylene > high-density polyethylene > low-density polyethylene, transparent and white. The results were similar to other regional studies and suggested that their main source was single-use packaging, disposed inadequately due to poor garbage collection.

Exploring sorption of pesticides and PAHs in microplastics derived from plastic mulch films used in modern agriculture

The sorption and vector effect of microplastics on the transfer of pesticides and polycyclic aromatic hydrocarbons (PAHs), as well as its impact on agriculture remain largely unexplored. This comparative study is first to investigate the sorption behavior of different pesticides and PAHs at environmentally realistic concentrations by model microplastics and microplastics derived from polyethylene mulch films. Sorption was found to be up to 90% higher in the case of microplastics derived from mulch films as opposed to pure polyethylene microspheres. For microplastics from mulch films, the sorption percentages for pesticides in media containing CaCl₂ were reported to be: pyridate (75.68% and 52.44%), fenazaquin (48.54% and 32.02%), pyridaben (45.04% and 56.70%), bifenthrin (74.27% and 25.88%), etofenprox (82.16% and 54.16%) and pyridalyl (97.00% and 29.74%) at 5 μg/L and 200 μg/L pesticide concentration levels respectively. For PAHs, the sorption amounts were: naphthalene (22.03% and 48.00%), fluorene (38.99% and 39.00%), anthracene (64.62% and 68.02%) and pyrene (75.65% and 86.38%) at 5 μg/L and 200 μg/L PAH concentration levels respectively. Sorption was influenced by the octanol-water partition coefficient (log K_ow) and ionic strength. Kinetics of the process in the case of sorption of pesticides were best explained by pseudo-first order kinetic model (R² between 0.90 and 0.98) while the best fitting isotherm model was Dubinin-Radushkevich (R² between 0.92 and 0.99). Results suggest the presence of surface level physi-sorption through a micropore volume filling mechanism and the role of hydrophobic and electrostatic forces. Pesticide desorption data in polyethylene mulch films indicate that pesticides with high log K_ow were almost completely retained in mulch films, while those with lower log K_ow were desorbed rapidly into the surrounding media. Our study highlights the role of microplastics from plastic mulch films as vectors for pesticide and PAH transport at environmentally realistic concentrations and the factors that influence it.

Exposure of the amphipod Hyalella azteca to microplastics. A study on subtoxic responses and particle biofragmentation

Microplastics are widespread pollutants in the environment and are considered a global pollution problem. Microplastics mostly originate from larger plastics and due to environmental conditions are undergoing constant fragmentation processes. It is important to understand the fragmentation pathways, since they play a key role in the fate of the particles, and also directly influence toxicity. Amphipods are potential inducers of plastic debris fragmentation. Here, Hyalella azteca was exposed to different concentrations (540, 2700, 5400 items/L) of 24.5 µm polystyrene microplastics (PS-MP) for 7 days. After exposure, oxidative stress, particle size reduction, and mortality were checked. No significant mortality was seen in any of the treatments, although changes were recorded in all enzymatic biomarkers analyzed. It was observed that throughout the ingestion and egestion of PS-MP by H. azteca, particles underwent intense fragmentation, presenting a final size up to 25.3% smaller than the initial size. The fragmentation over time (24, 72, 120, 168 h) was verified and the results showed a constant reduction in average particle size indicating that H. azteca are able to induce PS-MP fragmentation. This process may facilitate bioaccumulation and trophic particle transfer.

Spatial distribution characteristics and migration of microplastics in surface water, groundwater and sediment in karst areas: The case of Yulong River in Guilin, Southwest China

Karst regions, due to their unique topography, may be more susceptible to contaminants such as microplastics from other ecosystems. However, few studies reported the occurrence of microplastics in karst areas. Here, we investigated the abundance of microplastics in surface water, sediments and groundwater. In addition, their spatial distribution characteristics and migration were also analyzed in a typical karst area, Yulong River, Guilin, China. Microplastic pollution was found in the sediments, surface water and especially groundwater in Yulong River. The abundance of microplastics was 0-4 items/L, 247-1708 items/kg and 0-4 items/L in surface water, sediments and groundwater, respectively. Microplastics in surface water and groundwater were fiber-based, while those in sediments were fragment-based. Polypropylene (PP), Polystyrene (PS) and Polyethylene terephthalate (PET) are dominant microplastic types in Yulong River. Moreover, the abundance of microplastic pollution in different functional areas ranked as follows: living area > agricultural area > landscape area. Clustering analysis showed that disposable tableware and plastic bags used in tourism activities might be the main source of microplastics. More importantly, our findings suggested that microplastics in groundwater could be the result of hydraulic exchange between groundwater and surface water in karst areas, rather than soil infiltration. These findings provided us with a further understanding of the pollution of microplastics in karst rivers.

Bioremediation of microplastics in freshwater environments: A systematic review of biofilm culture, degradation mechanisms, and analytical methods

Microplastics, defined as particles <5 mm in diameter, are emerging environmental pollutants that pose a threat to ecosystems and human health. Biofilm degradation of microplastics may be an ecologically friendly approach. This review systematically summarises the factors affecting biofilm degradation of microplastics and proposes feasible methods to improve the efficiency of microplastic biofilm degradation. Environmentally insensitive microorganisms were screened, optimized, and commercially cultured to facilitate the practical application of this technology. For strain screening, technology should focus on microorganisms/strains that can modify the hydrophobicity of microplastics, degrade the crystalline zone of microplastics, and metabolise additives in microplastics. The biodegradation mechanism is also described; microorganisms secreting extracellular oxidases and hydrolases are key factors for degradation. Measuring the changes in molecular weight distribution (MWD) enables better analysis of the biodegradation behaviour of microplastics. Biofilm degradation of microplastics has relatively few applications because of its low efficiency; however, enrichment of microplastics in freshwater environments and wastewater treatment plant tailwater is currently the most effective method for treating microplastics with biofilms.

Microplastic contamination in seawater across global marine protected areas boundaries

Despite the relatively rich literature on the omnipresence of microplastics in marine environments, the current status and ecological impacts of microplastics on global Marine Protected Areas (MPAs) are still unknown. Their ubiquitous occurrence, increasing volume, and ecotoxicological effects have made microplastic an emerging marine pollutant. Given the critical conservation roles of MPAs that aim to protect vulnerable marine species, biodiversity, and resources, it is essential to have a comprehensive overview of the occurrence, abundance, distribution, and characteristics of microplastics in MPAs including their buffer zones. Here, extensive data were collected and screened based on 1565 peer-reviewed literature from 2017 to 2020, and a GIS-based approach was applied to improve the outcomes by considering boundary limits. Microplastics in seawater samples were verified within the boundaries of 52 MPAs; after including the buffer zones, 1/3 more (68 MPAs) were identified as contaminated by microplastics. A large range of microplastic levels in MPAs was summarized based on water volume (0-809,000 items/m³) or surface water area (21.3-1,650,000,000 items/km²), which was likely due to discrepancy in sampling and analytical methods. Fragment was the most frequently observed shape and fiber was the most abundant shape. PE and PP were the most common and also most abundant polymer types. Overall, 2/3 of available data reported that seawater microplastic levels in MPAs were higher than 12,429 items/km², indicating that global MPAs alone cannot protect against microplastic pollution. The current limitations and future directions were also discussed toward the post-2020 Global Biodiversity Framework goals.

Occurrence and distribution of microplastics in organic fertilizers in China

The use of organic fertilizers is becoming a routine measure of soil improvement in China, and therefore organic fertilizers are considered an emerging contributor to microplastic accumulation in farmland soils. However, little is known regarding the microplastic contents in organic fertilizers used across China. Here, we investigated the occurrence and distribution of microplastics in 102 organic fertilizer samples across 22 provincial administrative regions of China to serve as a basis for the development of better microplastic management strategies. Organic fertilizers are made of a wide variety of feedstocks, including livestock manure (chicken, cow, goat, and pig manure) and bacterial residues etc., and are mainly produced via aerobic composting. In present study, microplastics within a 0.1-5 mm range in different types of organic fertilizers were separated using a general sequential density flotation method. Microplastic abundances ranged from undetectable to 2550 items/kg, with an average value of 325 ± 511 items/kg and a detection frequency of 80.4 %. The highest microplastic abundances were detected in Beijing City (758 items/kg) and in compound organic fertilizers (average of 386 items/kg). The microplastics in organic fertilizer were primarily white/transparent (75.9 %), 1-3 mm in size (55 %), and film-shaped (39 %). Interestingly, microplastics were not detected in cow dung fertilizer, suggesting that cow dung-based fertilizers might generally contain lower microplastic levels. Moreover, organic fertilizer microplastics tended to be concentrated in provincial areas with intensive agriculture, and the input flux of microplastics from organic fertilizer into fertilized soils reached an average of 5.07 × 10¹² items per year. Collectively, our findings provide key insights into the current state of microplastic levels in organic fertilizers in China and serve as a basis for the creation of novel microplastic mitigation strategies in farmland soils.