N, P Co-doped porous biochar derived from cornstalk for high performance CO2 adsorption and electrochemical energy storage

Microalgae realizes self N-doped biochar for heavy metal polluted sediment remediation

Heavy metal contamination in sediment has become a significant global environmental challenge. Numerous studies have demonstrated the effectiveness of modified biochar to solve heavy metal contamination in sediment. However, the modification process with complex methods and expensive modifiers prevented its large-scale application. In this study, an N self-doped biochar was obtained by pyrolysis of Spirulina sp. (SBC). Meanwhile, the K2CO3 impregnation method was utilized to prepare Spirulina sp. biochar (KSBC), which demonstrated a higher specific surface area (874 m2/g) and richer O, N functional groups. The adsorption capacity of KSBC550-120 for Cu (Ⅱ), Zn (Ⅱ), and Cd (Ⅱ) was 57.9 ± 0.3 mg/g, 43.6 ± 0.7 mg/g, and 63.9 ± 0.6 mg/g, respectively. The adsorption process is primarily governed by chemical processes, mainly through ion exchange, surface complexation, dissolution-precipitation, electrostatic interactions, adsorption-reduction, and cation-π interactions. Moreover, utilizing KSBC550-120 for mixing or capping effectively reduced heavy metal concentrations in both the overlying and pore water of the sediments. 1.0 wt% KSBC550-120 with capping treatment significantly reduced the release of heavy metals from the sediment by 80.3-91.9%. This study provides effective theoretical support for re-utilizing waste algal residues and remediation of the heavy metal-contaminated river and lake sediments using microalgae biochar.

Nitrogen-Doped Porous Carbons Derived from Peanut Shells as Efficient Electrodes for High-Performance Supercapacitors

The doping of porous carbon materials with nitrogen is an effective approach to enhance the electrochemical performance of electrode materials. In this study, nitrogen-doped porous carbon derived from peanut shells was prepared as an electrode for supercapacitors. Melamine, urea, urea phosphate, and ammonium dihydrogen phosphate were employed as different nitrogen dopants. The optimized electrode material PA-1-1 prepared by peanut shells, with ammonium dihydrogen phosphate as a nitrogen dopant, exhibited a N content of 3.11% and a specific surface area of 602.7 m2/g. In 6 M KOH, the PA-1-1 electrode delivered a high specific capacitance of 208.3 F/g at a current density of 1 A/g. Furthermore, the PA-1-1 electrode demonstrated an excellent rate performance with a specific capacitance of 170.0 F/g (retention rate of 81.6%) maintained at 20 A/g. It delivered a capacitance of PA-1-1 with a specific capacitance retention of 98.8% at 20 A/g after 5000 cycles, indicating excellent cycling stability. The PA-1-1//PA-1-1 symmetric supercapacitor exhibited an energy density of 17.7 Wh/kg at a power density of 2467.0 W/kg. This work not only presents attractive N-doped porous carbon materials for supercapacitors but also offers a novel insight into the rational design of biochar carbon derived from waste peelings.

Cellulose-based aerogel derived N, B-co-doped porous biochar for high-performance CO2 capture and supercapacitor

The remarkable characteristics of porous biochar have generated significant interest in various fields, such as CO2 capture and supercapacitors. The modification of aerogel-derived porous biochar through activation and heteroatomic doping can effectively enhance CO2 adsorption and improve supercapacitor performance. In this study, a novel N, B-co-doped porous biochar (NBCPB) was synthesized by carbonating and activating the N, B dual-doped cellulose aerogel. N and B atoms were doped in-situ using a modified alkali-urea method. The potassium citrate was served as both an activator and a salt template to facilitate the formation of a well-developed nanostructure. The optimized NBCPB-650-1 (where 650 corresponded to activation temperature and 1 represented mass ratio of potassium citrate activator to carbonized NBCPB-400 precursor) displayed the largest micropore volume of 0.40 cm3·g-1 and a high specific surface area of 891 m2·g-1, which contributed to an excellent CO2 adsorption capacity of 4.19 mmol·g-1 at 100 kPa and 25 °C, a high CO2/N2 selectivity, and exceptional reusability (retained >97.5 % after 10 adsorption-desorption cycles). Additionally, the NBCPB-650-1 electrode also delivered a high capacitance of 220.9 F·g-1 at 1 A·g-1. Notably, the symmetrical NBCPB-650-1 supercapacitor exhibited a high energy density of 9 Wh·kg-1 at the power density of 100 W·kg-1. This study not only presents the potential application of NBCPB-650-1 material in CO2 capture and electrochemical energy storage, but also offers a new insight into easy-to-scale production of heteroatomic-modified porous biochar.

Advancements in application of modified biochar as a green and low-cost adsorbent for wastewater remediation from organic dyes

Synthetic organic dyes, which are resistant to biodegradation, pose a notable health risk, potentially leading to cancer and respiratory infections. Researchers have addressed this concern by exploring physicochemical methods to remove organic dyes from wastewater. A particularly promising solution involves modified biochar adsorbents, which demonstrate high efficiency in organic dye removal. Biochar, a charcoal-like material derived from biomass pyrolysis, offers advantages such as low cost, eco-friendliness, high efficiency and reusability. Beyond its role in sustainable soil remediation, biochar proves effective in removing organic dyes from wastewater after undergoing physical or chemical modification. Acid-base activation or metal-heteroatom impregnation enhances biochar's adsorption capacity. This comprehensive review examines the attributes of biochar, common methods for production and modification, and the impacts of raw materials, pyrolysis temperature, heating rate and residence time. It further elucidates the biochar adsorption mechanism in the removal of organic dyes, assessing factors influencing efficiency, including biochar feedstock, solution pH, adsorption temperature, particle size, initial dye concentration, biochar dosage and reaction time. It explores challenges, opportunities, reusability and regeneration methods of biochar in treating organic dye wastewater. It also discusses recent advances in organic dye removal using adsorption-based biochar. The review ultimately advocates for enhancing biochar's adsorption performance through post-modification.

The application of P-modified biochar in wastewater remediation: A state-of-the-art review

Phosphorus modified biochar (P-BC) is an effective adsorbent for wastewater remediation, which has attracted widespread attention due to its low cost, vast source, unique surface structure, and abundant functional groups. However, there is currently no comprehensive analysis and review of P-BC in wastewater remediation. In this study, a detailed introduction is given to the synthesis method of P-BC, as well as the effects of pyrolysis temperature and residence time on physical and chemical properties and adsorption performance of the material. Meanwhile, a comprehensive investigation and evaluation were conducted on the different biomass types and phosphorus sources used to synthesize P-BC. This article also systematically compared the adsorption efficiency differences between P-BC and raw biochar, and summarized the adsorption mechanism of P-BC in removing pollutants from wastewater. In addition, the effects of P-BC composite with other materials (element co-doping, polysaccharide stabilizers, microbial loading, etc.) on physical and chemical properties and pollutant adsorption capacity of the materials were investigated. Some emerging applications of P-BC were also introduced, including supercapacitors, CO2 adsorbents, carbon sequestration, soil heavy metal remediation, and soil fertility improvement. Finally, some valuable suggestions and prospects were proposed for the future research direction of P-BC to achieve the goal of multiple utilization.

A review: Hydrochar as potential adsorbents for wastewater treatment and CO2 adsorption

To valorize the biomass and organic waste, hydrothermal carbonization (HTC) stands out as a highly efficient and promising pathway given its intrinsic advantages over other thermochemical processes. Hydrochar, as the main product obtained from HTC, is widely applied as a fuel source and soil conditioner. Aside from these applications, hydrochar can be either directly used or modified as bio-adsorbents for environmental remediation. This potential arises from its tunable surface chemistry and its suitability to act as a precursor for activated or engineered carbon. In view of the importance of this topic, this review offers a thorough examination of the research progress for using hydrochar and its modified forms to remove organic dyes (cationic and anionic dyes), heavy metals, herbicides/pesticides, pharmaceuticals, and CO2. The review also sheds light on the fundamental chemistry involved in HTC of biomass and the major analytical techniques applied for understanding surface chemistry of hydrochar and modified hydrochar. The knowledge gaps and potential hurdles are identified to highlight the challenges and prospects of this research field with a summary of the key findings from this review. Overall, this article provides valuable insights and directives and pinpoints the areas meriting further investigation in the application potential of hydrochar in wastewater management and CO2 capture.

Rational design of animal-derived biochar composite for peroxymonosulfate activation: Understanding the mechanism of singlet oxygen-mediated degradation of sulfamethoxazole

Animal-derived biochar are identified as a promising candidate for peroxymonosulfate (PMS) activation due to the abundant aromatics and oxygen-containing functional groups. The current investigation focuses on pig carcass-derived biochar (800-BA-PBC) by ball milling-assisted alkali activation. The results showed that 800-BA-PBC could effectively activate PMS and degraded 94.2% sulfamethoxazole (SMX, 10 mg/L) within 40 min. The reaction rate constant was found to be 47 times higher than that observed with PBC. The enhanced catalytic activity is mainly attributed to the increase in specific surface area, the increase content of oxygen-containing groups on the surface, and the formation of graphitic nitrogen. The quenching tests and electron paramagnetic resonance (EPR) analysis demonstrated that 1O2 is the main active species in the degradation of SMX. Moreover, the 800-BA-PBC + PMS system can maintain excellent degradation rate under different water quality, wide pH range, and the presence of different anions. The degradation pathways of SMX in the optimal system are also evaluated through intermediate identification and DFT calculation. These results indicate that the catalytic system has high anti-interference ability and practical application potential. This investigation provides new insight into the rational design of animal-derived biochar and develops a low-cost technology for the treatment of antibiotic containing wastewater.

Significant Differences in the Effects of Nitrogen Doping on Pristine Biochar and Graphene-like Biochar for the Adsorption of Tetracycline

To improve the adsorption efficiency of pollutants by biochar, preparing graphene-like biochar (GBC) or nitrogen-doped biochar are two commonly used methods. However, the difference in the nitrogen doping (N-doping) effects upon the adsorption of pollutants by pristine biochar (PBC) and GBC, as well as the underlying mechanisms, are still unclear. Take the tetracycline (TC) as an example, the present study analyzed the characteristics of the adsorption of TCs on biochars (PBC, GBC, N-PBC, N-GBC), and significant differences in the effects of N-doping on the adsorption of TCs by PBC and GBC were consistently observed at different solution properties. Specifically, N-doping had varied effects on the adsorption performance of PBC, whereas it uniformly improved the adsorption performance of GBC. To interpret the phenomenon, the N-doping upon the adsorption was revealed by the QSAR model, which indicated that the pore filling (VM) and the interactions between TCs with biochars (Ead-v) were found to be the most important two factors. Furthermore, the density functional theory (DFT) results demonstrated that N-doping slightly affects biochar's chemical reactivity. The van der Waals (vdWs) and electrostatic interactions are the main forces for TCs-biochars interactions. Moreover, N-doping mostly strengthened the electrostatic interactions of TCs-biochars, but the vdWs interactions of most samples remained largely unaffected. Overall, the revealed mechanism of N-doping on TCs adsorption by biochars will enhance our knowledge of antibiotic pollution remediation.

CuO nanoparticles mixed with activated BC extracted from algae as promising material for supercapacitor electrodes

The present analysis aims to use existing resources to lower the cost of electrodes and reduce environmental pollution by utilizing waste materials like green algae. In the present research, the hydrothermal carbonization technique was utilized to synthesize a nano sized CuO mixed with activated biochar (CuO@BC) extracted from red sea algae (Chlorophyta). The CuO@BC sample was extensively examined using several advanced physical techniques, such as UV/Visible spectroscopy, FTIR, XED, HRTEM, SEM, EDX, BET, and TGA. The HRTEM indicated that the size of the particles is 32 nm with a larger surface area and without aggregations. The BET analysis of CuO@BC indicates that the material contains pores of a relatively large size and with a pore diameter of about 42.56 A°. The electrochemical analysis of CuO@BC modified glassy carbon electrode CuO@BC/GCE has been investigated using CV, GCD, and EIS techniques. This CuO@BC/GCE shows excellent electrochemical features that are significant for energy storage applications. The CuO@BC/GCE showed a specific capacitance of approximately 353 Fg-1 which is higher compared to individual materials. Overall, the research outcomes suggest that the CuO@BC/GCE shows potential for use in high-performance supercapacitors as energy storage systems that are eco-friendly and sustainable.

Biomass waste as an alternative source of carbon and silicon-based absorbents for CO2 capturing application

The production of low-cost solid adsorbents for carbon dioxide (CO2) capture has gained massive consideration. Biomass wastes are preferred as precursors for synthesis of CO2 solid adsorbents, due to their high CO2 adsorption efficiency, and ease of scalable low-cost production. This review particularly focuses on waste biomass-derived adsorbents with their CO2 adsorption performances. Specifically, studies related to carbon (biochar and activated carbon) and silicon (silicates and geopolymers)-based adsorbents were summarized. The impact of experimental parameters including nature of biomass, synthesis route, carbonization temperature and type of activation methods on the CO2 adsorption capacities of biomass-derived pure carbon and silicon-based adsorbents were evaluated. The development of various enhancement strategies on biomass-derived adsorbents for CO2 capture and their responsible factors that impact adsorbent's CO2 capture proficiency were also reviewed. The possible CO2 adsorption mechanisms on the adsorbent's surface were highlighted. The challenges and research gaps identified in this research area have also been emphasized, which will help as further research prospects.

Gamma-induced interconnected networks in microporous activated carbons from palm petiole under NaNO3 oxidizing environment towards high-performance electric double layer capacitors (EDLCs)

Activated carbons (ACs) were developed from palm petiole via a new eco-friendly method composed of highly diluted H2SO4 hydrothermal carbonization and low-concentration KOH-activating pyrolysis followed by gamma-induced surface modification under NaNO3 oxidizing environment. The prepared graphitic carbons were subsequently used as an active material for supercapacitor electrodes. The physiochemical properties of the ACs were characterized using field emission scanning electron microscope-energy dispersive X-ray spectroscopy, N2 adsorption/desorption isotherms with Brunauer-Emmett-Teller surface area analysis, Fourier transform infrared spectroscopy, X-ray diffraction and Raman spectroscopy. The electrochemical performance of the fabricated electrodes was investigated by cyclic voltammetry, galvanostatic charge-discharge and electrochemical impedance spectroscopy. Even treated with extremely low H2SO4 concentration and small KOH:hydrochar ratio, the maximum SBET of 1365 m2 g-1 for an AC was obtained after gamma irradiation. This was attributed to radiation-induced interconnected network formation generating micropores within the material structure. The supercapacitor electrodes exhibited electric double-layer capacitance giving the highest specific capacitance of 309 F g-1 as well as excellent cycle stability within 10,000 cycles. The promising results strongly ensure high possibility of the eco-friendly method application in supercapacitor material production.

Activated biocarbons derived from molasses as new tailored CO2 adsorbents

An innovative and cost-effective method for enhancing CO₂ capture by modifying the textural properties of derived activated biocarbons was explored. A molasses solution was prepared with a sucrose concentration of 1 mol/dm³. A two-step synthesis process was involved, which includes the hydrothermal synthesis of spherical carbonaceous materials from molasses followed by chemical activation. The carbonaceous material to activation agent ratio was studied from 1 to 4. The CO₂ adsorption of all activated biocarbons was tested at 0, 10, and 20°C and a pressure of up to 1 bar. The results showed a significant correlation between CO₂ adsorption and the textural properties of the activated biocarbons. The activated biocarbon with the highest CO₂ adsorption of 7.1 mmol/g at 1 bar and 0°C was successfully produced by modifying with KOH. The selectivity of CO₂ over N₂ calculated on the basis of the Ideal Adsorbed Solution Theory was excellent (16.5). The Sips model was found to be the most suitable, and the isosteric heats of adsorption were also specified.

Biomass Derived N-Doped Porous Carbon Made from Reed Straw for an Enhanced Supercapacitor

Developing advanced carbon materials by utilizing biomass waste has attracted much attention. However, porous carbon electrodes based on the electronic-double-layer-capacitor (EDLC) charge storage mechanism generally presents unsatisfactory capacitance and energy density. Herein, an N-doped carbon material (RSM-0.33-550) was prepared by directly pyrolyzing reed straw and melamine. The micro- and meso-porous structure and the rich active nitrogen functional group offered more ion transfer and faradaic capacitance. X-ray diffraction (XRD), Raman, scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), Brunauer-Emmett-Teller (BET) measurements were used to characterize the biomass-derived carbon materials. The prepared RSM-0.33-550 possessed an N content of 6.02% and a specific surface area of 547.1 m² g^-1. Compared with the RSM-0-550 without melamine addition, the RSM-0.33-550 possessed a higher content of active nitrogen (pyridinic-N) in the carbon network, thus presenting an increased number of active sites for charge storage. As the anode for supercapacitors (SCs) in 6 M KOH, RSM-0.33-550 exhibited a capacitance of 202.8 F g^-1 at a current density of 1 A g^-1. At a higher current density of 20 A g^-1, it still retained a capacitance of 158 F g^-1. Notably, it delivered excellent stability with capacity retention of 96.3% at 20 A g^-1 after 5000 cycles. This work not only offers a new electrode material for SCs, but also gives a new insight into rationally utilizing biomass waste for energy storage.

Recent progress on production technologies of food waste-based biochar and its fabrication method as electrode materials in energy storage application

The abundance of food waste across the globe has called for the mitigation and reduction of these discarded wastes. Herein, the potential of biochar derived from food waste is unquestionable as it provides a sustainable way of utilizing the abundance of available biomass, as well as an effective way of preserving the ecosystem through the reduction of concerning environmental issues. This review focuses on the food waste-based biochar as advanced electrode materials in the energy storage devices. Efforts have been made to present and discuss the current exploration of the food waste utilization, along with the biochar production technologies through thermochemical conversion, including combustion, gasification, and pyrolysis method. Finding its limitation in literatures, discussion on the food waste-based biochar fabrication method as the electrode materials is elaborated, alongside the current food waste-based biochar that has been explored in the energy application thus far. Towards the end, the outlook and perspective on the further development of food waste-based biochar have been outlined.

Carbon Dioxide Adsorption over Activated Carbons Produced from Molasses Using H2SO4, H3PO4, HCl, NaOH, and KOH as Activating Agents

Cost-effective activated carbons for CO2 adsorption were developed from molasses using H2SO4, H3PO4, HCl, NaOH, and KOH as activating agents. At the temperature of 0 °C and a pressure of 1 bar, CO2 adsorption equal to 5.18 mmol/g was achieved over activated carbon obtained by KOH activation. The excellent CO2 adsorption of M-KOH can be attributed to its high microporosity. However, activated carbon prepared using HCl showed quite high CO2 adsorption while having very low microporosity. The absence of acid species on the surface promotes CO2 adsorption over M-HCl. The pore size ranges that are important for CO2 adsorption at different temperatures were estimated. The higher the adsorption temperature, the more crucial smaller pores were. For 1 bar pressure and temperatures of 0, 10, 20, and 30 °C, the most important were pores equal and below: 0.733, 0.733, 0.679, and 0.536 nm, respectively.

One-Pot Synthesis of N-Rich Porous Carbon for Efficient CO2 Adsorption Performance

N-enriched porous carbons have played an important part in CO2 adsorption application thanks to their abundant porosity, high stability and tailorable surface properties while still suffering from a non-efficient and high-cost synthesis method. Herein, a series of N-doped porous carbons were prepared by a facile one-pot KOH activating strategy from commercial urea formaldehyde resin (UF). The textural properties and nitrogen content of the N-doped carbons were carefully controlled by the activating temperature and KOH/UF mass ratios. As-prepared N-doped carbons show 3D block-shaped morphology, the BET surface area of up to 980 m2/g together with a pore volume of 0.52 cm3/g and N content of 23.51 wt%. The optimal adsorbent (UFK-600-0.2) presents a high CO2 uptake capacity of 4.03 mmol/g at 0 °C and 1 bar. Moreover, as-prepared N-doped carbon adsorbents show moderate isosteric heat of adsorption (43-53 kJ/mol), acceptable ideal adsorption solution theory (IAST) selectivity of 35 and outstanding recycling performance. It has been pointed out that while the CO2 uptake was mostly dependent on the textural feature, the N content of carbon also plays a critical role to define the CO2 adsorption performance. The present study delivers favorable N-doped carbon for CO2 uptake and provides a promising strategy for the design and synthesis of the carbon adsorbents.