Pectins from fruits: Relationships between extraction methods, structural characteristics, and functional properties

Effect of pectin modification on the properties of cellulose nanofibrils prepared from citrus peel

Cellulose nanofibrils (CNFs) from non-woody biomass, including citrus peel (CpCNFs), are promising naturally occurring nanomaterials; however, their properties depend on the composition of non-cellulosic components, including pectin. In this study, the effects of pectin modifications on CpCNFs were examined, including demethylesterification using alkaline treatment and enzymatic degradation of pectin using pectinase. CpCNFs could be redispersed in water with little aggregation after drying; however, the redispersibilities of both alkaline-treated (AT-CpCNFs) and pectinase-treated CpCNFs (PT-CpCNFs) were improved. Both AT-CpCNFs and PT-CpCNFs exhibited higher viscosity than untreated CpCNFs (UT-CpCNFs); redispersion in water after drying further increased the viscosity. A quartz crystal microbalance revealed that interactions between AT-CpCNFs were barely detectable, and interactions between PT-CpCNFs were stronger than those between UT-CpCNFs. The increase in the carboxylate groups of pectin due to demethylesterification in AT-CpCNF may have increased the viscosity and reduced the interactions between AT-CpCNFs, explaining the improved redispersibility. The increase in the viscosity of PT-CpCNFs may be attributed to the increased purity of CNFs, which is assumed to be more viscous than pectin. Our results show that the properties of CpCNFs are affected by the structure, properties, and content of pectin and can be controlled by pectin modification.

An in-depth review: Unraveling the extraction, structure, bio-functionalities, target molecules, and applications of pectic polysaccharides

Pectic polysaccharides have long been a challenging subject of research in the field of macromolecular science, given their complex structures and wide range of biological effects. However, the extensive exploration of pectic polysaccharides has been limited due to the intricacy of their structures. In this comprehensive review, we aim to provide a thorough summary of the existing knowledge on pectic polysaccharides, with a particular focus on aspects such as classification, extraction methodologies, structural analysis, elucidation of biological activities, and exploration of target molecules and signaling pathways. By conducting a comprehensive analysis of existing literature and research achievements, we strive to establish a comprehensive and systematic framework that can serve as a reference and guide for further investigations into pectic polysaccharides. Furthermore, this review delves into the applications of pectic polysaccharides beyond their fundamental attributes and characteristics, exploring their potential in fields such as materials, food, and pharmaceuticals. We pay special attention to the promising opportunities for pectic polysaccharides in the pharmaceutical domain and provide an overview of related drug development research. The aim of this review is to facilitate a holistic understanding of pectic polysaccharides by incorporating multifaceted research, providing valuable insights for further in-depth investigations into this significant polymer.

Structure characterization and gelling properties of RG-I-enriched pectins extracted from citrus peels using four different methods

To facilitate the application of rhamnogalacturonan-I (RG-I)-enriched pectins (RGPs) as novel, healthy, and gelling food additives, this study compared the structural characteristics and gelling properties of RGPs extracted from citrus peel via four methods (alkali: AK, high-temperature/pressure: TP, citric acid: CA, and enzyme-assisted: EA extractions). AK and CA yielded pectins with the highest RG-I proportions (54.8 % and 51.9 %, respectively) by disrupting the homogalacturonan region; TP and EA increased the RG-I proportions by ~10 %. Among the four methods, AK induced the lowest degree of esterification (DE) (6.7 %) and longer side chains that form strong entanglement, contributing to its highest gel hardness. The relatively low DE (18.5 %) of CA RGP facilitated stable gel formation. Notably, its highly branched RG-I region afforded more intramolecular hydrophobic interactions, making a more highly cross-linked gel network of better gel resilience. In contrast, TP induced the highest DE (57 %) and curved molecular chains; it inhibited Ca2+ binding, entanglement, and intramolecular hydrophobic interactions, and thus no gel formed. EA RGP was associated with the lowest molecular size, rendering it more difficult for Ca2+ to form links, which resulted no gel. These findings offer insights into the relationship among the extraction methods, molecular structures, and gelling properties of RGPs.

Renewable hemicellulose-based materials for value-added applications

The importance of renewable resources and environmentally friendly materials has grown globally in recent time. Hemicellulose is renewable lignocellulosic materials that have been the subject of substantial valorisation research. Due to its distinctive benefits, including its wide availability, low cost, renewability, biodegradability, simplicity of chemical modification, etc., it has attracted increasing interest in a number of value-added fields. In this review, a systematic summarizes of the structure, extraction method, and characterization technique for hemicellulose-based materials was carried out. Also, their most current developments in a variety of value-added adsorbents, biomedical, energy-related, 3D-printed materials, sensors, food packaging applications were discussed. Additionally, the most recent challenges and prospects of hemicellulose-based materials are emphasized and examined in-depth. It is anticipated that in the near future, persistent scientific efforts will enable the renewable hemicellulose-based products to achieve practical applications.

Polysaccharides in fruits: Biological activities, structures, and structure-activity relationships and influencing factors-A review

Fruits are a rich source of polysaccharides, and an increasing number of studies have shown that polysaccharides from fruits have a wide range of biological functions. Here, we thoroughly review recent advances in the study of the bioactivities, structures, and structure-activity relationships of fruit polysaccharides, especially highlighting the structure-activity influencing factors such as extraction methods and chemical modifications. Different extraction methods cause differences in the primary structures of polysaccharides, which in turn lead to different polysaccharide biological activities. Differences in the degree of modification, molecular weight, substitution position, and chain conformation caused by chemical modification can all affect the biological activities of fruit polysaccharides. Furthermore, we summarize the applications of fruit polysaccharides in the fields of pharmacy and medicine, foods, cosmetics, and materials. The challenges and perspectives for fruit polysaccharide research are also discussed.

Cocoa by-products: A comprehensive review on potential uses, waste management, and emerging green technologies for cocoa pod husk utilization

Cocoa is considered to be one of the most significant agricultural commodities globally, alongside Palm Oil and Rubber. Cocoa is the primary ingredient in the manufacturing of chocolate, a globally popular food product. Approximately 30 % of cocoa, specifically cocoa nibs, are used as the primary constituent in chocolate production., while the other portion is either discarded in landfills as compost or repurposed as animal feed. Cocoa by-products consist of cocoa pod husk (CPH), cocoa shell, and pulp, of which about 70 % of the fruit is composed of CPH. CPH is a renewable resource rich in dietary fiber, lignin, and bioactive antioxidants like polyphenols that are being underutilized. CPH has the potential to be used as a source of pectin, dietary fibre, antibacterial properties, encapsulation material, xylitol as a sugar substitute, a fragrance compound, and in skin care applications. Several methods can be used to manage CPH waste using green technology and then transformed into valuable commodities, including pectin sources. Innovations in extraction procedures for the production of functional compounds can be utilized to increase yields and enhance existing uses. This review focuses on the physicochemical of CPH, its potential use, waste management, and green technology of cocoa by-products, particularly CPH pectin, in order to provide information for its development.

Punica granatum L. polysaccharides: A review on extraction, structural characteristics and bioactivities

Punica granatum L., commonly known as pomegranate, is native to Afghanistan and Iran, and today widely cultivated all over the world. Pomegranate polysaccharides are one of the most important bioactive components of P. granatum, which have a wide range of beneficial biological activities, such as anticancer, immunostimulatory, hepatoprotection, anti-psoriasis and antioxidation. Hot water extraction is currently the most commonly used method to isolate pomegranate polysaccharides. The structural characteristics of pomegranate polysaccharides have been extensively investigated through various advanced modern analytical techniques. This review focuses on the extraction, purification, structural characteristics, biological activities and structure-activity relationships of polysaccharides from Punica granatum. The aim of this article is to comprehensively and systematically summarize recent information of polysaccharides from Punica granatum and to serve as a basis for further research and development as therapeutic agents and functional foods.

Extraction, Characterization, and Antioxidant Activity of Pectin from Lemon Peels

Pectin is a natural polymer that is found in the cell walls of higher plants. This study presents a comprehensive analysis of pectin extracted from lemon in two different geographic regions (Peddie and Fort Beaufort) in two consecutive years (2023 and 2024) named PP 2023, PP 2024, FBP 2023, and FBP 2024. The dried lemon peels were ground into a powder, sifted to obtain particles of 500 μm, and then subjected to pectin extraction using a conventional method involving mixing lemon peel powder with distilled water, adjusting the pH level to 2.0 with HCl, heating the mixture at 70 °C for 45 min, filtering the acidic extract, and precipitating pectin with ethanol. The yield of these pectin samples was statistically significant, as FBP 2024 had a maximum yield of 12.2 ± 0.02%, PP 2024 had a maximum yield of 13.0 ± 0.02%, FBP 2023 had a maximum yield of 12.2 ± 0.03%, and PP 2023 had a maximum yield of 13.1 ± 0.03%, The variation in yield could be due to the differences in the growing conditions, such as the climate and soil, which could have affected the pectin content in the lemons. The physicochemical characterization of all samples proved that our pectin samples could be used in the pharmaceutical and food industries, with anhydrouronic acid content which was greater than 65%, as suggested by the FAO. The scanning electron microscope analysis of all extracted pectin was rough and jagged, while the commercial pectin displayed a smooth surface morphology with a consistent size. FTIR confirmed the functional groups which were present in our samples. Thermogravimetric analysis was employed to investigate the thermal behavior of the extracted pectin in comparison with commercial pectin. It was found that the extracted pectin had three-step degradation while the commercial pectin had four-step degradation. Additionally, pectin samples have been shown to have antioxidants, as the IC50 of PP 2024, PP 2023, FBP 2023, FBP 2024, and Commercial P was 1062.5 ± 20.0, 1201.3 ± 22.0, 1304.6 ± 19.0, 1382.6 ± 29.9, and 1019.4 ± 17.1 mg/L, respectively. These findings indicate that lemon pectin has promising characteristics as a biopolymer for use in biomedical applications.

Novel role of homogalacturonan region of pectin in disrupting the interaction between fibronectin and integrin β1

Pectin interacts with fibronectin (FN), a modular protein in the extracellular matrix. This interaction is significant as FN plays a pivotal role by binding to the receptor integrin α5β1. However, the molecular mechanism underlying the pectin-FN interaction and its impact on integrin binding remains unknown. In this study, water-soluble pectins (WSPs) were extracted from three different pectin sources and subsequently characterized. These included Citrus WSP, which primarily comprises the homogalacturonan region, and Kaki and Yuzu WSPs, both of which are rich in rhamnogalacturonan regions. We investigated the molecular interactions between these WSPs and two FN fragments, Anastellin and RetroNectin, using surface plasmon resonance analysis. Citrus WSP exhibited a notable binding affinity to FN, with a dissociation constant (KD) of approximately 10-7 M. In contrast, Kaki and Yuzu WSPs displayed comparatively weaker or negligible binding affinities. The binding reactivity of Citrus WSP with FN was notably diminished following the enzymatic removal of its methyl-ester groups. Additionally, Citrus WSP disrupted the binding of integrin β1 to RetroNectin without altering the affinity, despite its minimal direct binding to integrin itself. This study furthers our understanding of the intricate pectin-FN interaction and sheds light on their potential physiological relevance and impact on cellular responses.

Deep eutectic solvent (DES)-assisted extraction of pectin from Ficus carica Linn. peel: optimization, partial structure characterization, functional and antioxidant activities

BACKGROUND

The pectin from Ficus carica Linn. (fig) peels is a valuable and recyclable constituent that may bring huge economic benefits. To maximize the utilization of this resource, deep eutectic solvent (DES)-assisted extraction was applied to extract pectin from fig peels, and the extraction process was optimized with response surface methodology.

RESULTS

When DES (choline chloride/oxalic acid = 1:1) content was 168.1 g kg-1, extraction temperature was 79.8 °C, liquid-solid ratio was 23.3 mL g-1, and extraction time was 120 min, the maximum yield of 239.6 g kg-1 was obtained, which was almost twice the extraction of hot water. DES-extracted fig peel pectin (D-FP) exhibited better nature than hot water-extracted fig peel pectin (W-FP) in terms of uronic acid content, particle size distribution, and solubility, but lower molecular weight and esterification degree. D-FP and W-FP had similar infrared spectra and thermodynamic peaks but differed in monosaccharide compositions. D-FP also showed good antioxidant capacities and exhibited better functional activities than W-FP.

CONCLUSION

These results indicated that D-FP was of promising quality being utilized in food or medical industries and the optimal DES-assisted extraction method might be applied as a sustainable process for the effective extraction of bioactive pectin from fig peels with the excellence of low equipment requirements and simple operation. © 2024 Society of Chemical Industry.

Investigation into pectin extraction and technological implementations in the food industry

Pectin, a complex polysaccharide found abundantly in the cell walls of fruits and vegetables, plays a pivotal role in various food applications owing to its unique gelling, thickening and stabilizing properties. As consumer preferences lean towards natural and sustainable ingredients, the demand for pectin as a food additive has surged. This burgeoning interest has prompted a comprehensive exploration into both the extraction methods of pectin from its natural sources and its diverse technological applications in the food industry. The extraction process involves breaking down the plant cell wall to release the pectin. Traditional methods such as hot acid extraction have been widely used, but advances in technology have spurred the development of novel techniques like enzyme-assisted extraction and microwave-assisted extraction. These methods aim not only to enhance the yield and purity of extracted pectin but also to minimize environmental impact and energy consumption. Pectin's versatility has positioned it as a valuable ingredient in the food industry. Its ability to form gels under specific conditions makes it a key component in the production of jams, jellies and fruit preserves. Additionally, pectin acts as a stabilizer in dairy products, prevents syneresis in baked goods and improves the texture of confectionery items. The application of pectin goes beyond its role as a gelling agent; it is also employed in the encapsulation of bioactive compounds, enhancing the functional properties of various food products. © 2024 Society of Chemical Industry.

Impacts of ultrasound-assisted Fenton degradation and alkaline de-esterification on structural properties and biological effects of pectic polysaccharides from Tartary buckwheat leaves

Tartary buckwheat (Fagopyrum tataricum (L.) Gaertn) leaf has abundant rhamnogalacturonan-I enriched pectic polysaccharides, which exert various health-promoting effects. Nevertheless, the potential relationship between the chemical structure and the biological function of pectic polysaccharides from Tartary buckwheat leaves (TBP) remains unclear. Therefore, to bridge the gap between the chemical structure and the biological function of TBP, the impacts of ultrasound-assisted Fenton degradation (UFD) and mild alkaline de-esterification (MAD) on structural properties and biological effects of TBP were systematically studied. Compared with the native TBP (molecular mass, 9.537 × 104 Da), the molecular masses of degraded TBPs (TBP-MMW, 4.811 × 104 Da; TBP-LMW, 2.101 × 104 Da) were significantly reduced by the UFD modification, while their primary chemical structures were overall stable. Besides, compared with the native TBP (esterification degree, 22.73 %), the esterification degrees of de-esterified TBPs (TBP-MDE, 14.27 %; TBP-LDE, 6.59 %) were notably reduced by the MAD modification, while their primary chemical structures were also overall stable. Furthermore, the results revealed that both UFD and MAD modifications could significantly improve the antioxidant, antiglycation, and immunostimulatory effects of TBP. Indeed, TBP's biological effects were negatively correlated to its molecular mass and esterification degree, while positively linked to its free uronic acids. The findings demonstrate that both UFD and MAD modifications are promising techniques for the structural modification of TBP, which can remarkedly promote its biological effects. Besides, the present results are conducive to better understanding TBP's structure-bioactivity relationship.

Effect of structural characteristics on the physicochemical properties and functional activities of dietary fiber: A review of structure-activity relationship

Dietary fibers come from a wide range of sources and have a variety of preparation methods (including extraction and modification). The different structural characteristics of dietary fibers caused by source, extraction and modification methods directly affect their physicochemical properties and functional activities. The relationship between structure and physicochemical properties and functional activities is an indispensable basic theory for realizing the directional transformation of dietary fibers' structure and accurately regulating their specific properties and activities. In this paper, since a brief overview about the structural characteristics of dietary fiber, the effect of structural characteristics on a variety of physicochemical properties (hydration, electrical, thermal, rheological, emulsifying property, and oil holding capacity, cation exchange capacity) and functional activities (hypoglycemic, hypolipidemic, antioxidant, prebiotic and harmful substances-adsorption activity) of dietary fiber explored by researchers in last five years are emphatically reviewed. Moreover, the future perspectives of structure-activity relationship are discussed. This review aims to provide theoretical foundation for the targeted regulation of properties and activities of dietary fiber, so as to improve the quality of their applied products and physiological efficiency, and then to realize high value utilization of dietary fiber resources.

Modulating pectin structure and enhancing texture of frozen yellow peaches: The impact of low-temperature blanching

High-temperature blanching (HTB) is the primary process that causes texture softening in frozen yellow peaches. The implementation of low-temperature blanching reduced pectin methyl esterification, increased pectin cross-linking, and mitigated pectin depolymerization during the subsequent HTB, leading to the superior texture of frozen yellow peaches with enhanced water holding capacity, higher fracture stress, and initial modulus. However, adding 2 % calcium lactate (w/v) during low-temperature blanching did not further improve the texture of frozen yellow peaches. Instead, it softened the texture by reducing Na2CO3-soluble pectin (NSP) and increasing water-soluble pectin (WSP) content. This study provided a theoretical basis for applying low-temperature blanching to improve the texture of frozen yellow peaches.

Structural characterization and prebiotic activity of rhamnogalacturonan-I rich pumpkin pectic polysaccharide extracted by alkaline solution

The present study aimed to investigate the structural and physicochemical characteristics of alkali-extracted pectic polysaccharide (AkPP) and to evaluate its prebiotic effects. AkPP was obtained from pumpkin pulp using an alkaline extraction method. AkPP, which had a molecular weight (Mw) of mainly 13.67 kDa and an esterification degree of 9.60%, was composed mainly of galacturonic acid (GalA), rhamnose (Rha), galactose, and arabinose. The ratio of the homogalacturonan (HG) region to the rhamnogalacturonan-I (RG-I) region in AkPP was 48.74:43.62. In the nuclear magnetic resonance spectrum, the signals indicating α-1,4-linked D-GalA, α-1,2-linked L-Rha, α-1,2,4-linked L-Rha residues were well resolved, demonstrating the presence of the HG and RG-I regions in its molecular structure. Collectively, AkPP was low methoxyl pectin rich in the RG-I region with short side chains and had a low Mw. Thermal analysis revealed that AkPP had good thermal stability. Compared to inulin, AkPP more effectively promoted the proliferation of Lactobacillus acidophilus, Lacticaseibacillus rhamnosus GG, Lacticaseibacillus casei, and Lacticaseibacillus paracasei and the production of lactic, acetic, and propionic acids. This study presents the unique structural features of AkPP and provides a scientific basis for further investigation of the potential of AkPP as a promising prebiotic.

Exploration of green preparation strategy for Lycium barbarum polysaccharide targeting Bacteroides proliferative and immune-enhancing activities and its potential use in geriatric foods

Lycium barbarum polysaccharide (LBP) is beneficial for elderly people, but its use is limited in geriatric foods due to the lack of comprehensive information on its preparation strategy and physical property. In this study, the low-ester rhamnogalacturonan-I (RG-I) type pectic polysaccharide-protein complexes with varying physicochemical properties, structural characteristics, proliferative activities on Bacteroides, and immune-enhancing activities on RAW 264.7 cells, were obtained by moderate-temperature acid extraction within adjustment of enzymatic and physical pretreatments. LBP prepared by moderate-temperature acid extraction, namely S1-A, showed the strongest immune-enhancing activity via increasing the phagocytosis capacity and NO release of RAW 264.7 cells by 23 % and 76 %, respectively. S1-A exhibited relatively high viscosity and calcium ion response characteristic with the application potential for thickened liquid foods for the elderly with dysphagia. LBP prepared by composite cellulase and pectinase pretreatment combined with moderate-temperature acid extraction, namely S1-M1, showed the strongest Bacteroides proliferative activity that was equivalent to 0.60-0.97 times of that of inulin. S1-M1 exhibited extremely low viscosity and strong tolerance to food nutrients with high processing applicability for fluid foods. This study provided crucial data for the preparation and application of LBP targeting gut microbiota disorders and immunosenescence for the development of geriatric foods.

Towards Negative Emissions: Hydrothermal Carbonization of Biomass for Sustainable Carbon Materials

The contemporary production of carbon materials heavily relies on fossil fuels, contributing significantly to the greenhouse effect. Biomass is a carbon-neutral resource whose organic carbon is formed from atmospheric CO2. Employing biomass as a precursor for synthetic carbon materials can fix atmospheric CO2 into solid materials, achieving negative carbon emissions. Hydrothermal carbonization (HTC) presents an attractive method for converting biomass into carbon materials, by which biomass can be transformed into materials with favorable properties in a distinct hydrothermal environment, and these carbon materials have made extensive progress in many fields. However, the HTC of biomass is a complex and interdisciplinary problem, involving simultaneously the physical properties of the underlying biomass and sub/supercritical water, the chemical mechanisms of hydrothermal synthesis, diverse applications of resulting carbon materials, and the sustainability of the entire technological routes. This review starts with the analysis of biomass composition and distinctive characteristics of the hydrothermal environment. Then, the factors influencing the HTC of biomass, the reaction mechanism, and the properties of resulting carbon materials are discussed in depth, especially the different formation mechanisms of primary and secondary hydrochars. Furthermore, the application and sustainability of biomass-derived carbon materials are summarized, and some insights into future directions are provided.

Transformation of agricultural wastes into functional oligosaccharides using enzymes and emerging technologies

INTRODUCTION

Pectin-oligosaccharides (POS) serve diverse purposes as a food ingredient, antimicrobial and biostimulant in plants, and their functionality is linked to the degree of esterification. Grape and broccoli wastes emerge as environmentally friendly alternatives to obtaining pectin, serving as a sustainable source to producing POS. For example, microwaves have proven to be an effective and sustainable method to extract polysaccharides from plant matrices.

OBJECTIVE

This work aims to use grape and broccoli wastes as alternative sources for obtaining pectin by microwave-assisted extraction and biotransformation into POS, which possess biological properties.

MATERIAL AND METHODS

The extraction conditions were identified at a power of 400 W, 300 s for the extraction of pectin from grape pomace and broccoli waste. Biotransformation of pectins into POS, using commercial enzyme preparations (Viscozyme L and Pectinase). Characterisation was carried out by Fourier-transform infrared spectroscopy, thermogravimetric analysis, and scanning electron microscopy.

RESULTS

Physicochemical analysis indicated grape pomace and broccoli waste pectins had galacturonic acid content of 63.81 ± 1.67 and 40.83 ± 2.85 mg 100 mg-1, low degree of esterification of 34.89% and 16.22%, respectively. Biotransformation of pectins into POS resulted in a 20% hydrolysis rate. The main enzymatic activity was polygalacturonase for the degradation of the main structure of the pectin.

CONCLUSION

Production of POS from agro-industrial wastes by emerging technologies, such as the combined use of microwave-assisted extraction and enzymatic processes, represents an alternative method for the generation of bioactive compounds with distinctive properties suitable for different applications of interest.

Comparative Analysis of Physicochemical and Functional Properties of Pectin from Extracted Dragon Fruit Waste by Different Techniques

Dragon fruit peel, often discarded, is a valuable source of commercial pectin. This study investigates different extraction methods, including cold-water (CW), hot-water (HW), ultrasound (US), and novel enzyme extraction (xylanase: EZX), to extract pectins from dragon fruit peel and compare their characteristics. The pectin yield ranged from 10.93% to 20.22%, with significant variations in physicochemical properties across methods (p < 0.05). FTIR analysis revealed that extraction methods did not alter the primary structural configuration of the pectins. However, molecular weights (Mws) varied significantly, from 0.84 to 1.21 × 103 kDa, and the degree of esterification varied from 46.82% to 51.79% (p < 0.05). Monosaccharide analysis identified both homogalacturonan (HG) and rhamnogalacturonan-I (RG-I) pectic configurations in all pectins, predominantly comprising galacturonic acid (77.21-83.12 %mol) and rhamnose (8.11-9.51 %mol), alongside minor side-chain sugars. These properties significantly influenced pectin functionalities. In the aqueous state, a higher Mw impacted viscosity and emulsification performance, while a lower Mw enhanced antioxidant activities and promoted the prebiotic function of pectin (Lactis brevies growth). This study highlights the impact of extraction methods on dragon fruit peel pectin functionalities and their structure-function relationship, providing valuable insights into predicting dragon fruit peel's potential as a food-grade ingredient in various products.

Plant polysaccharides extracted by high pressure: A review on yields, physicochemical, structure properties, and bioactivities

Polysaccharides are biologically essential macromolecules, widely exist in plants, which are used in food, medicine, bioactives' encapsulation, targeted delivery and other fields. Suitable extraction technology can not only improve the yield, but also regulate the physicochemical, improve the functional property, and is the basis for the research and application of polysaccharide. High pressure (HP) extraction (HPE) induces the breakage of raw material cells and tissues through rapid changes in pressure, increases extraction yield, reduces extraction time, and modifies structure of polysaccharides. However, thus far, literature review on the mechanism of extraction, improved yield and modified structure of HPE polysaccharide is lacking. Therefore, the present work reviews the mechanism of HPE polysaccharide, increasing extraction yield, regulating physicochemical and functional properties, modifying structure and improving activity. This review contributes to a full understanding of the HPE or development of polysaccharide production and modification methods and promotes the application of HP technology in polysaccharide production.

Pectin: Health-promoting properties as a natural galectin-3 inhibitor

Galectin-3 has a variety of important pathophysiological significance in the human body. Much evidence shows that the abnormal expression of galectin-3 is related to the formation and development of many diseases. Pectin is mostly obtained from processed citrus fruits and apples and is a known natural inhibitor of galactin-3. A large number of peels produced each year are discarded, and it is necessary to recycle some of the economically valuable active compounds in these by-products to reduce resource waste and environmental pollution. By binding with galectin-3, pectin can directly reduce the expression level of galectin-3 on the one hand, and regulate the expression level of cytokines by regulating certain signaling pathways on the other hand, to achieve the effect of treating diseases. This paper begins by presenting an overview of the basic structure of pectin, subsequently followed by a description of the structure of galectin-3 and its detrimental impact on human health when expressed abnormally. The health effects of pectin as a galectin-3 inhibitor were then summarized from the perspectives of anticancer, anti-inflammatory, ameliorating fibrotic diseases, and anti-diabetes. Finally, the challenges and prospects of future research on pectin are presented, which provide important references for expanding the application of pectin in the pharmaceutical industry or developing functional dietary supplements.

Methyl jasmonate regulation of pectin polysaccharides in Cosmos bipinnatus roots: A mechanistic insight into alleviating cadmium toxicity

Methyl jasmonate (MeJA), a crucial phytohormone, which plays an important role in resistance to Cadmium (Cd) stress. The cell wall (CW) of root system is the main location of Cd and plays a key role in resistance to Cd toxicity. However, the mechanism effect of MeJA on the CW composition and Cd accumulation remain unclear. In this study, the contribution of MeJA in regulating CW structure, pectin composition and Cd accumulation was investigated in Cosmos bipinnatus. Phenotypic results affirm MeJA's significant role in reducing Cd-induced toxicity in C. bipinnatus. Notably, MeJA exerts a dual impact, reducing Cd uptake in roots while increasing Cd accumulation in the CW, particularly bound to pectin. The molecular structure of pectin, mainly uronic acid (UA), correlates positively with Cd content, consistent in HC1 and cellulose, emphasizing UA as pivotal for Cd binding. Furthermore, MeJA modulates pectin methylesterase (PME) activity under Cd stress, influencing pectin's molecular structure and homogalacturonan (HG) content affecting Cd-binding capacity. Chelate-soluble pectin (CSP) within soluble pectins accumulates a substantial Cd proportion, with MeJA regulating both UA content and the minor component 3-deoxy-oct-2-ulosonic acid (Kdo) in CSP. The study delves into the intricate regulation of pectin monosaccharide composition under Cd stress, revealing insights into the CW's physical defense and Cd binding. In summary, this research provides novel insights into MeJA-specific mechanisms alleviating Cd toxicity in C. bipinnatus, shedding light on complex interactions between MeJA, and Cd accumulation in CW pectin polysaccharide.

Physicochemical characterization of pectin extracted from mandarin peels using novel electromagnetic heat

A novel electromagnetic heat extraction method was presented, whereby mandarin peels residue solution was located in a winding coil subjected to an oscillating magnetic field, and the pectin was extracted under appropriate conditions. Numerical relationships between applied magnetic field and induced electric field (IEF) in the extraction process were elaborated. The results showed that the induced current density, IEF and terminal temperature increased with increasing magnetic field. The maximum current density of 0.35 A/cm corresponds to the highest terminal temperature of 84.6 °C and IEF intensity of 26.6 V/cm. When magnetic field intensity was 1.39 T and the extraction time was 15 min, the maximum yield of pectin reached 9.16 %. In addition, all treatments impacted the ash content, protein content, water-holding capacity (WHC), and oil-holding capacity (OHC) of the obtained pectin. The pectin extracted by electromagnetic heat had the lowest DE value of 71.3 % with 126.55 kDa molecular weight, while the GalA content was at the highest level of 76.18 %. After different treatments, the composition of pectin monosaccharides changed, but there were slight differences in the composition of pectin polysaccharides. Moreover, the electromagnetic heat extracted pectin had light color and an obvious surface fragmentation of the peel residue.

Insights into the impact of modification methods on the structural characteristics and health functions of pectin: A comprehensive review

Pectin is a complex polysaccharide that is widely present in plant cells and has multiple physiological functions. However, most pectin exists in the form of protopectin, which has a large molecular weight and cannot be fully absorbed and utilized in the human gut to exert its effects. The significant differences in the structure of different sources of pectin also limited their application in the food and medical fields. In order to achieve greater development and utilization of pectin functions, this paper reviewed several commonly used methods for pectin modification from physical, chemical, and biological perspectives, and elaborated on the relationship between these modification methods and the structure and functional properties of pectin. At the same time, the functional characteristics of modified pectin and its application in medical health, such as regulating intestinal health, anticancer, anti-inflammatory, and drug transport, were reviewed, so as to provide a theoretical basis for targeted modification of pectin and the development of new modified pectin products.

Chemical characterization-function relationship of pectins from persimmon fruit within different ripeness

This study investigated the structural and functional characteristics of two different molecular weight persimmon pectin extracted from unripe persimmon (PP-1) and ripe persimmon (PP-2). The molecular weight was determined as 117.8 kDa and 61.3 kDa for PP-1 and PP-2, which consisting of glucose, rhamnose, mannose, galactose, and xylose. AFM results indicated PP-1 with many linear chains, and short chains in while short chains, branching points, and heterogeneous clumps were found in PP-2.Emulsion characterization and storage stability experiments revealed that PP-1 with more stable emulsifying properties than PP-2 and commercial citrus pectin. In vitro fermentation of PP-1 and PP-2 by gut microbiota indicated that PP-1 and PP-2 groups were higher than inulin group in total SCFAs production after 48 h of fermentation. This study provided useful information for high value utilization of persimmon pectin.

Effect of H2O2-assisted ultrasonic bath on the degradation and physicochemical properties of pectin

The effects of H2O2-assisted ultrasonic bath degradation technology on pectin were investigated. The degradation efficiency with different pectin concentrations, H2O2 concentrations, ultrasonic power, and ultrasonic time was analyzed. The results showed that pectin concentration was negatively correlated with the degradation efficiency of pectin, while, H2O2 concentration, ultrasonic power, and ultrasonic time were positive correlated with the degradation efficiency. Besides, the apparent viscosity and viscoelasticity of the degraded pectin decreased significantly. The antioxidant activity increased after the H2O2-assisted ultrasonic bath treatment. The results of FTIR, NMR, laser particle size, SEM, XRD, and AFM analysis indicated that the degradation treatment did not destroy the main structure of pectin. The average particle size and crystallinity of pectin decreased. The degree of aggregation and the height of the molecular chain decreased significantly. In conclusion, the H2O2-assisted ultrasonic bath degradation technique could effectively degrade pectin. This study provided a comprehensive analysis of the degradation of pectin under H2O2-assisted ultrasonic bath, which will be beneficial to further develop H2O2-assisted ultrasonic bath techniques for pectin degradation.

Application of ultrasound technology for the effective management of waste from fruit and vegetable

Food waste presents a continuous challenge for the food industry, leading to environmental pollution and economic issues. A substantial amount of waste, including by-products from fruits and vegetables, non-edible food items, and other waste materials, is produced throughout the food supply chain, from production to consumption. Recycling and valorizing waste from perishable goods is emerging as a key multidisciplinary approach within the circular bio-economy framework. This waste, rich in raw by-products, can be repurposed as a natural source of ingredients. Researchers increasingly focus on biomass valorization to extract and use components that add significant value. Traditional methods for extracting these bio-compounds typically require the use of solvents and are time-consuming, underscoring the need for innovative techniques like ultrasound (US) extraction. Wastes from the processing of fruits and vegetables in the food industry can be used to develop functional foods and edible coatings, offering protection against various environmental factors. This comprehensive review paper discusses the valorization of waste from perishable items like fruits and vegetables using US technology, not only to extract valuable components from waste but also to treat wastewater in the beverage industry. It also covers the application of biomolecules recovered from this process in the development of functional foods and packaging.

Dual properties of pharmacological activities and preparation excipient: Bletilla striata polysaccharides

Bletilla striata has been used for thousands of years and shows the functions of stopping bleeding, reducing swelling, and promoting healing in traditional applications. For Bletilla striata, Bletilla striata polysaccharides (BSP) is the main active ingredient, exhibiting biological functions of anti-inflammatory, anti-oxidant, anti-fibrotic, immune modulation, anti-glycation, and so on. In addition, BSP has exhibited the characteristics of excipient such as bio-adhesion, bio-degradability, and bio-safety and has been prepared into a series of preparations such as nanoparticles, microspheres, microneedles, hydrogels, etc. BSP, as both a drug and an excipient, has already aroused more and more attention. In this review, publications in recent years related to the extraction and identification, biological activities, and excipient application of BSP are reviewed. Specifically, we focused on the advances in the application of BSP as a formulation excipient. We hold opinion that BSP not only needed more researches in the mechanisms, but also the development into hydrogels, nano-formulations, tissue engineering, and so on. And we believe that this paper provides a beneficial reference for further BSP innovation and in-depth research and promotes the use of these natural products in pharmaceutical applications.

Strong gelation capacity of a pectin-like polysaccharide in the presence of K+ ion

In the present study, a pectin-like apple polysaccharide (AP) obtained by metal precipitation technique was demonstrated to show strong gelling capacity in the presence of K+ ion upon cooling. Increasing amount of K+ addition monotonically promoted the gelation of AP, as characterized by the increased gelation temperature (Tgel), gel melting temperature (Tmelt) and the gel strength. Compared with K+ ion, Na+ was unable to induce AP gelation even at high ionic concentrations, but other monovalent cations (Rb+, Cs+) can induce the gelation as in the case of K+ addition. At room temperature, the minimum cationic concentration as required to induce AP gelation followed the order of K+ ≈ Cr+ (8 mM) > Rb+ (3.5 mM), indicating that cationic radius (Na+ < K+ < Rb+ < Cs+) played a dominant role in inducing AP gelation, but other factors may also be involved. Finally, the gelation behavior of AP in the presence of K+ was explained as the suppressed intermolecular electrostatic repulsion between AP chains due to the strong electrostatic shielding effect of K+, which led to the formation of a gel network mediated by intermolecular hydrogen bonding. This reported gelation property may allow AP to find application as a new gelling polysaccharide.

Effect of pasteurization processing and storage conditions on softening of acidified chili pepper: Pectin and it related enzymes

The softening of acidified chili peppers induced by processing and storage has become a major challenge for the food industry. This study aims to explore the impact of pasteurization techniques, thermal processing (TP), high-pressure processing (HPP), addition of sodium metabisulfite (SMS), and storage conditions (25 °C, 37 °C, and 42 °C for 30 days) on the texture-related properties of acidified chili pepper. The results showed that the textural properties of samples were destructed by TP (the hardness of samples decreased by 19.43 %) but were less affected by HPP and SMS. Compared with processing, storage temperature had a more dominant impact on texture and pectin characteristics. With increased storage temperature, water-solubilized pectin fraction content increased (increased by 160.99 %, 136.74 %, and 13.01 % in TP, HPP, and SMS-stored groups, respectively), but sodium carbonate-solubilized pectin fraction content decreased (decreased by 29.84 %, 26.81 %, and 8.60 % in TP-, HPP-, and SMS-stored groups, respectively), especially in TP-stored groups. Multivariate data analysis showed that softening was more closely related to pectin conversion induced by acid hydrolysis and pectinase depolymerization. This finding offers new perspectives for the production of acidified chili pepper.

Valorization of walnut green husk (Juglans regia L.) through sequential electrohydrodynamic extraction of pectin and phenolics: Process optimization and multidimensional analysis

This study aimed to optimize the extraction of pectin and phenolics from walnut green husk using the electrohydrodynamic method (EHD) and assess its impact on the chemical structure and properties of pectin. A comparative analysis was conducted with acidified water as the conventional extraction method. The results revealed significant improvements under the optimal EHD conditions (36.8 min, 17.5 kV, 90 °C), leading to a remarkable increase of over 64 % in pectin yield and >20 % in total phenolic content in half the extraction time. Chemical analysis showed that pectin samples contain 1.4-1.7 % ash, 3.6-4.6 % protein, over 90 % carbohydrates, and a galacturonic acid content ranging from 67.7 to 68.2 g/g. Both extraction methods yielded pectin with a high methoxyl degree, comparable thermal stability, and amorphous structure. EHD treatment resulted in reduced molecular weight, degree of esterification, water-holding capacity, and emulsion stability of pectin while enhancing its solubility and emulsion capacity. In summary, EHD treatment significantly improved extraction yield and changed the functionality of pectin, particularly in terms of emulsion activity. This alteration should be considered when utilizing pectin for specific applications.

Effects of Calcium and pH on Rheological Thermal Resistance of Composite Xanthan Gum and High-Methoxyl Apple Pectin Matrices Featuring Dysphagia-Friendly Consistency

High-methoxyl apple pectin (AP) derived from apple was employed as the main ingredient facilitating rheological modification features in developing dysphagia-friendly fluidized alimentary matrices. Xanthan gum (XG) was also included as a composite counterpart to modify the viscoelastic properties of the thickened system under different thermal processes. The results indicate that AP is extremely sensitive to thermal processing, and the viscosity is greatly depleted under a neutral pH level. Moreover, the inclusion of calcium ions echoed the modification effect on the rheological properties of AP, and both the elastic property and viscosity value were promoted after thermal processing. The modification effect of viscoelastic properties (G' and G″) was observed whne XG was incorporated into the composite formula. Increasing the XG ratio from 7:3 to 6:4 (AP:XG) triggers the rheological transformation from a liquid-like form to a solid-like state, and the viscosity value shows that the AP-XG composite system exhibits better thermal stability after thermal processing. The ambient modifiers of pH (pH < 4) and calcium chloride concentration (7.5%) with an optimal AP-XG ratio of 7:3 led to weak-gel-like behavior (G″ < G'), helping to maintain the texture properties of dysphagia-friendly features similar to those prior to the thermal processing.

Pectin-rich dragon fruit peel extracts: An environmentally friendly emulsifier of natural origin

Pectin extraction is generally an energy-intensive industrial process, while on the other hand their extraction methods vary from different sources. Starting with that perspective, pectin (WSP) containing ultra-low degree of methylation (31.08 ± 1.27%) from dragon fruit peel (DFP) was extracted by using pure water at room temperature. WSP, dominant in DFP (17.13 ± 1.01%), showed both a high molecular weight and a wide molecular weight distribution, while the yield of the rest acid-soluble pectin (HAP) from DFP residue was only 5.22 ± 0.76%. Furthermore, WSP can stabilize emulsions over a wide range of concentrations and oil phases, especially HIPE. Therefore, the hypothesis was verified that the pectin-rich extract from dragon fruit peel with excellent emulsifying properties could be simply extracted by pure water. This environmentally-friendly and energy-saving extraction method provides a new insight to increase the additional value of dragon fruit peel produced in food processing.

A method for gel grade determination and application evaluation of two citrus pectins

Citrus paradisi Macf. cv. Changshanhuyou and Citrus paradisi Macf. cv. Star Ruby are two emerging processed citrus fruits. The processing produces lots of peel wastes rich in pectin. While more attentions were paid on pectin's functional properties, the quality about commercial application like gel grade was little investigated. In this study, we established a method for gel grade determination based on texture analyzer, the new method is economical and can be used on a large scale in the laboratory. The commercial application related qualities of two citrus pectins were also studied in detail. The results showed that the yields of Changshanhuyou and Star Ruby pectins (CHP and SRP) were 20.23 % and 18.33 %, respectively. The indexes of CHP and SRP mostly were in line with the commodity standards, except the dry weight loss. The gel grades of CHP and SRP determined by the new method were 109.9 and 96.8, respectively. The CHP aqueous solution exhibited higher apparent viscosity and better performance in stabilizing acidified milk drink (AMD) compared with commercial pectin. From the view of commercial application related qualities and functional properties, CHP could be a good potential commercial pectin.

Towards Valorization of Food-Waste-Derived Pectin: Recent Advances on Their Characterization and Application

Pectin, a natural biopolymer, can be extracted from food waste biomass, adding value to raw materials. Currently, commercial pectin is mostly extracted from citrus peels (85.5%) and apple pomace (14.0%), with a small segment from sugar beet pulp (0.5%). However, driven by high market demand (expected to reach 2.12 billion by 2030), alternative agro-industrial waste is gaining attention as potential pectin sources. This review summarizes the recent advances in characterizing pectin from both conventional and emerging food waste sources. The focus is the chemical properties that affect their applications, such as the degree of esterification, the neutral sugars' composition, the molecular weight, the galacturonic acid content, and technological-functional properties. The review also highlights recent updates in nutraceutical and food applications, considering the potential use of pectin as an encapsulating agent for intestinal targeting, a sustainable biopolymer for food packaging, and a functional and emulsifying agent in low-calorie products. It is clear from the considered literature that further studies are needed concerning the complexity of the pectin structure extracted from emerging food waste raw materials, in order to elucidate their most suitable commercial application.

Comparison in structural, physicochemical and functional properties of sweet potato stems and leaves polysaccharide conjugates from different technologies

In order to better understand the influences of extraction techniques on the yield, characteristics, and bioactivities of polysaccharide conjugates, hot reflux extraction (HRE), ultrasonic-assisted extraction (UAE), microwave-assisted extraction (MAE), complex enzymolysis extraction (CEE), ultra-high pressure extraction (UPE), ultrasonic complex enzymes extraction (UEE) were used to extract sweet potato stems leaves polysaccharide conjugates (SPSPCs), and their physicochemical characteristics, functional properties, antioxidant and hypoglycemic activities were compared. Results showed that compared with HRE conjugate (HR-SPSPC), the yield, content of uronic acid (UAC), total phenol (TPC), total flavonoid (TFC) and sulfate group (SGC), water solubility (WS), percentage of glucuronic acid (GlcA), galacuronic acid (GalA) and galactose (Gal), antioxidant and hypoglycemia activities of UEE polysaccharide conjugates (UE-SPSPC) significant increased, while its molecular weight (Mw), degree of esterification (DE), content of protein (PC) and percentage of glucose (Glc) declined, but monosaccharides and amino acid types, and glycosyl linkages were not much different. Indeed, UE-SPSPC possessed the highest antioxidant activities and hypolipidemic activities among six SPSPCs, which might be due to the high UAC, TPC, TFC, SGC, GlcA, GalA and WS, low Mw, DE and Glc of UE-SPSPC. The results reveal that UEE is an effective extraction and modification technology of polysaccharide conjugates.

Analysis of pectin-cellulose interaction in cell wall of lotus rhizome with assistance of ball-milling and galactosidase

The current study sought to depict the structural feature of polysaccharides extracted from Na2CO3 unextractable fraction (LUN) of lotus rhizome using galactosidase with assistance of ball milling. The extracted polysaccharides were a complex of cellulose microfibrils and the RG-I structural domain of pectin, and the top three monosaccharides were glucose, galactose and galactose uronic acid, which allowed to tune the properties of the enzyme-hydrolyzed polysaccharide from LUN after 15 and 45 min of ball milling. The data of XRD revealed that pectin has a masking effect on the diffraction peaks of cellulose components. The removing of the polysaccharides could increase the degree of crystallinity and the pectin-cellulose interaction mainly occured through the galactan side chain was speculated. Textural characterization by SEM exhibited a cross-linked rod-like structure, which is similar to the structure of cellulose microfibrils. The morphological analysis of AFM revealed that L15-P (enzyme-hydrolyzed polysaccharide from LUN after 15 min of ball milling) contained relatively ordered and uniform network structures. Overall, the present study provides an important insight into cell wall of lotus rhizome matrix polysaccharide.

Structural characteristics, functional properties, antioxidant and hypoglycemic activities of pectins from feijoa (Acca sellowiana) peel

The structure characteristics, functional properties, antioxidant and hypoglycemic activities of pectins extracted from feijoa peel with water (FP-W), acid (FP-A) and alkali (FP-B) were investigated. Results showed that the feijoa peel pectins (FPs) were mainly composed of galacturonic acid, arabinose, galactose and rhamnose. FP-W and FP-A had higher proportion of homogalacturonan domain, degree of esterification and molecular weight (for main component) than FP-B; FP-B owned the highest yield, protein and polyphenol contents. FP-W had a compact and smooth surface morphology unlike FP-A and FP-B. FP-W and FP-A had better thermal stability than FP-B. The rheological analysis suggested that the FPs exhibited pseudoplastic fluid behavior, and the elastic characteristics were dominant. Results showed that FP-W and FP-B had superior antioxidant and hypoglycemic activities than FP-A. According to correlation analysis, monosaccharide composition, sugar ratios and degree of acetylation were chief factors affecting the functional properties, antioxidant and hypoglycemic activities of the FPs.

Structural characterization and antioxidant activity of pectic polysaccharides from Veronica peregrina L

Background

Pectins are a class of acidic polysaccharides with complex structures. Different pectin molecules are composed of different domains, which have an important impact on their biological activity.

Objective

This study aimed to determine the structural features and the antioxidant activities of the pectic polysaccharides isolated from Veronica peregrina L.

Methods

The polysaccharide was isolated from Veronica peregrina L by water extraction and fractionated by ion exchange chromatography and gel permeation chromatography. The structure features of the pectic polysaccharides were determined by Fourier transforminfrared spectroscopy (FT-IR) and Nuclear magnetic resonance (NMR). The antioxidant activities was evaluated by the DPPH, OH and ABTS radical scavenging ability.

Results

WVPP-A2b and WVPP-A3b, with molecular weights of 48.7 × 10⁴ and 77.6 × 10⁴  kDa, respectively, contained homogalacturonan (HG), rhamnogalacturonan I (RG-I), and rhamnogalacturonan II (RG-II) domains with a mass ratio of 2.08:2.64:1.00 and 3.87:4.65:1:00, respectively. The RG-I domain contained an arabinogalactan II backbone and arabinans consisting of t-Araf, (1→5)-α-Araf, and (1→3,5)-α-Araf. WVPP-A3b also contained short chains consisting of the [t-Araf-(1→5)-α-Araf-(1→] structural unit. WVPP-A3b showed stronger ability to scavenge DPPH, hydroxyl, and ABTS radicals, which was potentially associated with its high content of galacturonic acid and presence of the HG domain.

Conclusion

The results provide information for enhancing knowledge of the structureactivity relationship of pectic polysaccharides from V. peregrina and their potential application in the healthcare food field.

Physicochemical properties and Pb2+ adsorption capacity of freeze-dried hawthorn pectin fractions by gradient ethanol precipitation

Three fractions of FHP20, FHP40 and FHP60 were obtained from freeze-dried hawthorn pectin by gradient ethanol precipitation (20-60 %), and their physicochemical properties and adsorption performance on Pb²⁺ were investigated. It was found that the content of galacturonic acid (GalA) and esterification of FHP fractions gradually reduced with the increase of ethanol concentration. FHP60 had the lowest molecular weight (60.69 × 10³ Da), and the composition and proportion of monosaccharides were significantly different. The experimental results of Pb²⁺ adsorption showed that the adsorption process fitted well with the Langmuir monolayer adsorption and the pseudo-second-order models. Our findings suggested that pectin fractions with good homogeneity of molecular weight and chemical construction can be obtained by gradient ethanol precipitation, and hawthorn pectin could be developed as a potential adsorbent for Pb²⁺ removal.

A wide diversity exists in pectin structure from thirteen apple cultivars

To emphasize that differences in pectin structure among cultivars play a crucial role in the texture and quality of fruits and vegetables, the sugar content and methyl-esterification of pectin fractions from 13 apple cultivars was studied. Cell wall polysaccharides were isolated as alcohol-insoluble solids (AIS) and subsequently extracted to yield water-soluble solids (WSS) and chelating-soluble solids (ChSS). All fractions contained significant amounts of galacturonic acid, while sugar compositions varied between cultivars. AIS and WSS pectins showed a degree of methyl-esterification (DM) > 50 %, while ChSS pectins had either a medium (~50 %) or low (<30 %) DM. Homogalacturonan as major structure was studied using enzymatic fingerprinting. Methyl-ester distribution of pectin was described by degrees of blockiness and -hydrolysis. Novel descriptive parameters were obtained by measuring the levels of methyl-esterified oligomers released by endo-PG (DB_PGme) and PL (DB_PLme). Pectin fractions differed in relative amounts of non-, moderately-, and highly methyl-esterified segments. WSS pectins were mostly lacking non-esterified GalA sequences, while ChSS pectins had medium DM and many non-methyl-esterified blocks or a low DM with many intermediate methyl-esterified GalA blocks. These findings will be of help to better understand physicochemical properties of apple and its products.

Effect of different NaCl concentration on the structure-function relationship of citrus peel pectins modified by electrochemistry

In this study, the modified citrus peel pectins (CPPs) were successfully produced by electrochemistry with varying NaCl concentrations of 0, 0.01 % and 0.1 % w/v using an H-type cell at 40 mA current. After 4 h, the pH and oxidation-reduction potential (ORP) of oxidized CPP solution in the anodic region were 2.00- 2.52 and 371.17- 564.45 mV, respectively, due to the electrolysis of water, whereas those of reduced CPP solution in cathodic region were 9.46- 10.84 and - 202.77 ~ -230.57 mV. The modified CPPs in the anodic region (A-0, A-0.01, and A-0.1) exhibited significantly higher weight-average molecular weights and methyl esterification degrees than those in the cathodic region (C-0, C-0.01 and C-0.1). In contrast, the K⁺, Mg²⁺, and Ca²⁺ contents of A-0, A-0.01, and A-0.1 were lower than those of C-0, C-0.01 and C-0.1 due to the electrophoretic migration. Furthermore, the antioxidant activities of A-0 and A-0.01 solutions were stronger than those of the C-0, C-0.01, and C-0.1, while rheological and texture properties of their hydrogels showed contradictory results. Finally, the potential structure-function relationships of CPPs were explored by combining PCA and correlation analysis. Overall, this study introduced a potential approach for pectin purification and functional low-methoxyl pectin manufacturing.

Gelation behaviors and mechanism of a new pectic polysaccharide from apple pomace as a potential gelatin substitute

In this study, we reported a pectic polysaccharide industrially obtained from apple pomace by metal ion precipitation technique showing an unexpected gelation behavior. Structurally, this apple pectin (AP) is a macromolecular polymer with a weight-average molecular weight (Mw) of 361.7 kDa, and DM (degree of methoxylation) of 12.5 %, comprising 60.38 % glucose, 19.41 % mannose, 17.60 % galactose and 1.00 % rhamnose and 1.61 % glucuronic acid. The low acidic sugar percentage relative to the total monosaccharide amount indicated a high branching structure of AP. On addition of Ca²⁺ ions, AP exhibited a remarkable gelling ability upon cooling its heat solution to low temperature (e.g., 4 °C). However, at room temperature (e.g., 25 °C) or in the absence of Ca²⁺, no gel was formed. At a fixed pectin concentration (0.5 %, w/v), AP showed increasing gel hardness and gelation temperature (T_gel) with CaCl₂ concentration increasing to 0.05 % (w/v); however, further addition of CaCl₂ weakened AP gels and even abolished the gelation. On reheating, all gels melted below 35 °C, which suggests the potential use of AP as a gelatin substitute. The gelation mechanism was explained as an intricate balance of the synchronous formation of hydrogen bond and Ca²⁺ crosslinks between AP molecules during cooling.

Pectin from plantain peels: Green recovery for transformation into reinforced packaging films

Plantain peels as agro-waste are generated in the millions of tons per year with no profitable management strategies. On the other hand, the excessive use of plastic packaging threatens the environment and human health. This research aimed to address both problems via a green approach. High-quality pectin was recovered from plantain peels via an enzyme-assisted and ethanol-recycling process. The yield and galacturonic acid (GalA) content of the recovered low methoxy pectin was 12.43% and 25.0%, respectively, when cellulase was added at 50 U per 5 g peel powder, with a significantly higher recovery rate and purity than the pectin products extracted with no cellulase (P ≤ 0.05). The recovered pectin was further integrated and reinforced with beeswax solid-lipid nanoparticles (BSLNs) to fabricate films as a potential alternative packaging material to single-use plastics. The reinforced pectin films showed improved light barrier, water resistance, mechanical, conformational, and morphological properties. This study presents a sustainable strategy to transform plantain peels into pectin products and pectin-based packaging films with broad applications.

Pectin from Fruit- and Berry-Juice Production by-Products: Determination of Physicochemical, Antioxidant and Rheological Properties

Plums (Prunus domestica); red currants (Ribes rubrum); black currants (Ribes nigrum); gooseberries (Ribes uva-crispa); sour cherries (Prunus cerasus); pumpkins (Cuccurbita spp.) are sources for valuable fruit- and berry-juice and cider production. This process leaves a large number of by-products (BP) in the form of pomace, which accounts for up to 80% of the raw material. This by-product represents a rich source of biologically active compounds, especially in the form of different pectic polysaccharides. The pectin extracted from commercial fruits such as citric fruits and apples has high medicinal properties, can be used as edible films and coatings, and is also useful in texture improvement and gel production in the food industry. However, many under-utilized fruits have received little attention regarding the extraction and characterization of their high/value pectin from their by-products. Moreover, the commercial extraction process involving strong acids and high temperature to obtain high-purity pectin leads to the loss of many bioactive components, and these lost components are often compensated for by the addition of synthetic antioxidants and colorants. The aim of the research is to extract pectin from juice production by-products with hot-water extraction using weak organic (0.1 N) citric acid, thus minimizing the impact on the environment. The yield of pectin (PY = 4.47-17.8% DM), galacturonic acid content (47.22-83.57 g 100^-1), ash content (1.42-2.88 g 100 g^-1), degree of esterification (DE = 45.16-64.06%), methoxyl content (ME = 4.27-8.13%), the total content of phenolic compounds (TPC = 2.076-4.668 µg mg^-1, GAE) and the antiradical scavenging activity of the pectin samples (DPPH method (0.56-37.29%)) were determined. Free and total phenolic acids were quantified by saponification using high-pressure liquid chromatography (HPLC). The pectin contained phenolic acids-benzoic (0.25-0.92 µg mg^-1), gallic (0.14-0.57 µg mg^-1), coumaric (0.04 µg mg^-1), and caffeic (0.03 µg mg^-1). The pectin extracts from by-products showed glucose and galactose (3.89-21.72 g 100 g^-1) as the main neutral sugar monosaccharides. Pectin analysis was performed using FT-IR, and the rheological properties of the pectin gels were determined. The quality of the obtained pectin from the fruit and berry by-products in terms of their high biological activity and high content of glucuronic acids indicated that the products have the potential to be used as natural ingredients in various food products and in pharmaceutical products.

Current progress in valorization of food processing waste and by-products for pectin extraction

Food processing waste and by-products such as peel of citrus fruit, melon, mango, pineapple, etc. and fruit pomace can be utilized for manufacturing of several high-value products. Valorization of these waste and by-products for extraction of pectin, can help offset growing environmental concerns, facilitate value-addition of by-products and their sustainable uses. Pectin has many applications in food industries such as gelling, thickening, stabilizing, and emulsifying agent, and as a dietary fibre. This review elaborates on various conventional and advanced, sustainable pectin extraction techniques, and paints a comparative picture between them considering extraction efficiency, quality, and functionality of the pectin. Conventional acid, alkali, and chelating agents-assisted extraction have been profusely used for pectin extraction, but advanced extraction technologies e.g., enzyme, microwave, supercritical water, ultrasonication, pulse electric field and high-pressure extraction are preferred due to less energy consumption, better quality product, higher yield, and minimal or no generation of harmful effluent.

Understanding the impact of pectin physicochemical variation on browning of simulated Maillard reaction system in thermal and storage processing

Maillard reaction browning is one of the quality deterioration in dried fruit products, but how pectin affects Maillard reaction in the fruit drying and storage process is not clear. This study aimed at investigating the mechanism of pectin variation impact on the browning of Maillard reaction by using simulated system (l-lysine, d-fructose and pectin) in thermal (60 °C and 90 °C for 8 h) and storage (37 °C for 14 days) process. Results showed that apple pectin (AP) and sugar beet pectin (SP) significantly enhanced the browning index (BI) of the Maillard reaction system by 0.01 to 134.51 in the thermal and storage processes, respectively, which were methylation degree of pectin-dependent. The pectin depolymerization product participated Maillard reaction by reacting with l-lysine, and increasing the 5-hydroxymethyl furfural (5-HMF) content (1.25-11.41-fold) and Abs_420nm (0.01-0.09). It also produced a new product (m/z 225.1245), which finally increased browning level of the system.

Recent progress in pectin extraction, characterization, and pectin-based films for active food packaging applications: A review

Pectin is an abundant complex polysaccharide obtained from various plants. Safe, biodegradable, and edible pectin has been extensively utilized in the food industry as a gelling agent, thickener, and colloid stabilizer. Pectin can be extracted in a variety of ways, thus affecting its structure and properties. Pectin's excellent physicochemical properties make it suitable for many applications, including food packaging. Recently, pectin has been spotlighted as a promising biomaterial for manufacturing bio-based sustainable packaging films and coatings. Functional pectin-based composite films and coatings are useful for active food packaging applications. This review discusses pectin and its use in active food packaging applications. First, basic information and characteristics of pectin, such as the source, extraction method, and structural characteristics, were described. Then, various methods of pectin modification were discussed, and the following section briefly described pectin's physicochemical properties and applications in the food sector. Finally, the recent development of pectin-based food packaging films and coatings and their use in food packaging were comprehensively discussed.

Current status and future challenges in extraction, purification and identification of Cepharanthine (a potential drug against COVID-19)

With the outbreak of the new coronavirus disease 2019 (COVID-19), the rapid spread of the virus has brought huge economic losses and life threats to the world. So far, we have entered the third year of the epidemic and there is an urgent need to provide more anti-viral treatment along with vaccination. Recent studies have confirmed that Cepharanthine (CEP) has strong antiviral efficacy, which is a potential drug against COVID-19. As a natural active alkaloid, the development of CEP-incorporated products is dependent on the extraction, purification and identification of CEP. This review gives a brief introduction of CEP, including its origin and classification, and its conventional and novel extraction techniques. In addition, the purification and identification techniques are summarized. In the last, the future research directions are proposed. It can be found from this review that the extraction from plants is still the main way to obtain CEP, and it is necessary to use innovative techniques and their hybrid extractions to extract CEP. More efficient extraction and purification techniques should be used to extract CEP in the future. This review provides a basis for the development of novel extraction and purification techniques and industrial utilization of CEP.