Architecture in 3D cell culture: An essential feature for in vitro toxicology

Assessing Receptor Activation in 2D and 3D Cultured Hepatocytes: Responses to a Single Compound and a Complex Mixture

Responding to global standards and legislative updates in Canada, including Bill S-5 (2023), toxicity testing is shifting towards more ethical, in vitro methods. Traditional two-dimensional (2D) monolayer cell cultures, limited in replicating the complex in vivo environment, have prompted the development of more relevant three-dimensional (3D) spheroidal hepatocyte cultures. This study introduces the first 3D spheroid model for McA-RH7777 cells, assessing xenobiotic receptor activation, cellular signaling, and toxicity against dexamethasone and naphthenic acid (NA)-fraction components; NAFCs. Our findings reveal that 3D McA-RH7777 spheroids demonstrate enhanced sensitivity and more uniform dose-response patterns in gene expression related to xenobiotic metabolism (AhR and PPAR) for both single compounds and complex mixtures. Specifically, 3D cultures showed significant gene expression changes upon dexamethasone exposure and exhibited varying degrees of sensitivity and resistance to the apoptotic effects induced by NAFCs, in comparison to 2D cultures. The optimization of 3D culture conditions enhances the model's physiological relevance and enables the identification of genomic signatures under varied exposures. This study highlights the potential of 3D spheroid cultures in providing a more accurate representation of the liver's microenvironment and advancing our understanding of cellular mechanisms in toxicity testing.

In vitro modelling of intramuscular injection site events

INTRODUCTION

Intramuscular (IM) injections deliver a plethora of drugs. The majority of IM-related literature details dissolution and/or pharmacokinetic (PK) studies, using methods with limited assessments of post-injection events that can impact drug fate, and absorption parameters. Food and Drug Association guidelines no longer require preclinical in vivo modeling in the U.S.A. Preclinical animal models fail to correlate with clinical outcomes, highlighting the need to study, and understand, IM drug fate in vitro using bespoke models emulating human IM sites. Post-IM injection events, i.e. underlying processes that influence PK outcomes, remain unacknowledged, complicating the application of in vitro methods in preclinical drug development. Understanding such events could guide approaches to predict and modulate IM drug fate in humans.

AREAS COVERED

This article reviews challenges in biorelevant IM site modeling (i.e. modeling drug fate outcomes), the value of technologies available for developing IM injectables, methods for studying drug fate, and technologies for training in performing IM administrations. PubMed, Web-of-Science, and Lens databases provided papers published between 2014 and 2024.

EXPERT OPINION

IM drug research is expanding what injectable therapeutics can achieve. However, post-injection events that influence PK outcomes remain poorly understood. Until addressed, advances in IM drug development will not realize their full potential.

Mass Spectrometry Imaging of Organoids to Improve Preclinical Research

Preclinical models are essential research tools before novel therapeutic or diagnostic methods can be applied to humans. These range from in vitro cell monocultures to vastly more complex animal models, but clinical translation to humans often fails to deliver significant results. Three-dimensional (3D) organoid systems are being increasingly studied to establish physiologically relevant in vitro platforms in a trade-off between the complexity of the research question and the complexity of practical experimental setups. The sensitivity and precision of analytical tools are yet another limiting factors in what can be investigated, and mass spectrometry (MS) is one of the most powerful analytical techniques available to the scientific community. Its innovative use to spatially resolve biological samples has opened many research avenues in the field of MS imaging (MSI). Here, this work aims to explore the current scientific landscape in the application of MSI on organoids, with an emphasis on their combined potential to facilitate and improve preclinical studies.

Requisite instruments for the establishment of three-dimensional epidermal human skin equivalents-A methods review

Human skin equivalents (HSEs) are three-dimensional skin organ culture models raised in vitro. This review gives an overview of common techniques for setting up HSEs. The HSE consists of an artificial dermis and epidermis. 3T3-J2 murine fibroblasts, purchased human fibroblasts or freshly isolated and cultured fibroblasts, together with other components, for example, collagen type I, are used to build the scaffold. Freshly isolated and cultured keratinocytes are seeded on top. It is possible to add other cell types, for example, melanocytes, to the HSE-depending on the research question. After several days and further steps, the 3D skin can be harvested. Additionally, we show possible markers and techniques for evaluation of artificial skin. Furthermore, we provide a comparison of HSEs to human skin organ culture, a model which employs human donor skin. We outline advantages and limitations of both models and discuss future perspectives in using HSEs.

Inclusion of cancer-associated fibroblasts in drug screening assays to evaluate pancreatic cancer resistance to therapeutic drugs

Pancreatic ductal adenocarcinoma (PDAC) is characterised by a pro-inflammatory stroma and multi-faceted microenvironment that promotes and maintains tumorigenesis. However, the models used to test new and emerging therapies for PDAC have not increased in complexity to keep pace with our understanding of the human disease. Promising therapies that pass pre-clinical testing often fail in pancreatic cancer clinical trials. The objective of this study was to investigate whether changes in the drug-dosing regimen or the addition of cancer-associated fibroblasts (CAFs) to current existing models can impact the efficacy of chemotherapy drugs used in the clinic. Here, we reveal that gemcitabine and paclitaxel markedly reduce the viability of pancreatic cell lines, but not CAFs, when cultured in 2D. Following the use of an in vitro drug pulsing experiment, PDAC cell lines showed sensitivity to gemcitabine and paclitaxel. However, CAFs were less sensitive to pulsing with gemcitabine compared to their response to paclitaxel. We also identify that a 3D co-culture model of MIA PaCa-2 or PANC-1 with CAFs showed an increased chemoresistance to gemcitabine when compared to standard 2D mono-cultures a difference to paclitaxel which showed no measurable difference between the 2D and 3D models, suggesting a complex interaction between the drug in study and the cell type used. Changes to standard 2D mono-culture-based assays and implementation of 3D co-culture assays lend complexity to established models and could provide tools for identifying therapies that will match clinically the success observed with in vitro models, thereby aiding in the discovery of novel therapies.

Leveraging Tissue Engineering for Skin Cancer Models

Bioengineered in vitro three-dimensional (3D) skin model has emerged as a promising tool for recapitulating different types of skin cancer and performing pre-clinical tests. However, a full-thickness 3D model including the epidermis, dermis, and hypodermis layers is scarce despite its significance in human physiology and diverse biological processes. In this book chapter, an attempt has been made to summarize various skin cancer models, including utilized skin layers, materials, cell lines, specific treatments, and fabrication techniques for three types of skin cancer: melanoma, basal cell carcinoma (BCC), and squamous cell carcinoma (SCC). Subsequently, current limitations and future directions of skin cancer models are discussed. The knowledge of the current status of skin cancer models can provide various potential applications in cancer research and thus a more effective way for cancer treatment.

Advancements in Three Dimensional In-Vitro Cell Culture Models

The scientific field is observing a gradual shift from monolayer cultures to three-dimensional (3D) models, as they give a more relevant data in pre-clinical stages. This review summarizes the major techniques and materials used to develop 3D platforms, especially for cancer. It also discusses the challenges and some unresolved issues of the field and highlights some techniques that have made it to the market.

Preparation of Chitosan/Recombinant Human Collagen-Based Photo-Responsive Bioinks for 3D Bioprinting

Collagen and chitosan are frequently used natural biomaterials in tissue engineering. However, most collagen is derived from animal tissue, with inconsistent quality and pathogen transmittance risks. In this context, we aimed to use a reliable Type-III recombinant human collagen (RHC) as an alternative biomaterial together with chitosan to develop novel photo-responsive bioinks for three-dimensional (3D) bioprinting. RHC was modified with methacrylic anhydride to obtain the RHC methacryloyl (RHCMA) and mixed with acidified chitosan (CS) to form composites CS-RHCMA. The characterizations demonstrated that the mechanical properties and the degradation of the bioinks were tunable by introducing the CS. The printabilities improved by adding CS to RHCMA, and various structures were constructed via extrusion-based 3D printing successfully. Moreover, in vitro tests confirmed that these CS-RHCMA bioinks were biocompatible as human umbilical vein endothelial cells (HUVECs) were sustained within the constructs post-printing. The results from the current study illustrated a well-established bioinks system with the potential to construct different tissues through 3D bioprinting.

Contractility analysis of human engineered 3D heart tissues by an automatic tracking technique using a standalone application

The use of Engineered Heart Tissues (EHT) as in vitro model for disease modeling and drug screening has increased, as they provide important insight into the genetic mechanisms, cardiac toxicity or drug responses. Consequently, this has highlighted the need for a standardized, unbiased, robust and automatic way to analyze hallmark physiological features of EHTs. In this study we described and validated a standalone application to analyze physiological features of EHTs in an automatic, robust, and unbiased way, using low computational time. The standalone application “EHT Analysis” contains two analysis modes (automatic and manual) to analyzes the contractile properties and the contraction kinetics of EHTs from high speed bright field videos. As output data, the graphs of displacement, contraction force and contraction kinetics per file will be generated together with the raw data. Additionally, it also generates a summary file containing all the data from the analyzed files, which facilitates and speeds up the post analysis. From our study we highlight the importance of analyzing the axial stress which is the force per surface area (μN/mm²). This allows to have a readout overtime of tissue compaction, axial stress and leave the option to calculate at the end point of an experiment the physiological cross-section area (PSCA). We demonstrated the utility of this tool by analyzing contractile properties and compaction over time of EHTs made out of a double reporter human pluripotent stem cell (hPSC) line (NKX2.5^EGFP/+-COUP-TFII^mCherry/+) and different ratios of human adult cardiac fibroblasts (HCF). Our standalone application “EHT Analysis” can be applied for different studies where the physiological features of EHTs needs to be analyzed under the effect of a drug compound or in a disease model.

Influence of Liver Extracellular Matrix in Predicting Drug-Induced Liver Injury: An Alternate Paradigm

In vitro drug-induced liver injury (DILI) models are promising tools for drug development to predict adverse events during clinical usage. However, the currently available DILI models are not specific or not able to predict the injury accurately. This is believed to be mainly because of failure to conserve the hepatocyte phenotype, lack of longevity, and difficulty in maintaining the tissue-specific microenvironment. In this study, we have assessed the potential of decellularized liver extracellular matrix (DLM) in retaining the hepatic cellular phenotype and functionality in the presence of a tissue-specific microenvironment along with its role in influencing the effect of the drug on hepatic cells. We show that DLM helps maintain the phenotype of the hepatic cell line HepG2, a well-known cell line for secretion of human proteins that is easily available. Also, the DLM enhanced the expression of a metabolic marker carbamoyl phosphate synthetase I (CPS1), a regulator of urea cycle, and bile salt export pump (BSEP), a marker of hepatocyte polarity. We further validated the DLM for its influence on the sensitivity of cells toward different classes of drugs. Interestingly, the coculture model, in the presence of endothelial cells and stellate cells, exhibited a higher sensitivity for both acetaminophen and trovafloxacin, a toxic compound that does not show any toxicity on preclinical screening. Thus, our results demonstrate for the first time that a multicellular combination along with DLM can be a potential and reliable DILI model to screen multiple drugs.

3D bioprinting of complex tissues in vitro: state-of-the-art and future perspectives

The pharmacology and toxicology of a broad variety of therapies and chemicals have significantly improved with the aid of the increasing in vitro models of complex human tissues. Offering versatile and precise control over the cell population, extracellular matrix (ECM) deposition, dynamic microenvironment, and sophisticated microarchitecture, which is desired for the in vitro modeling of complex tissues, 3D bio-printing is a rapidly growing technology to be employed in the field. In this review, we will discuss the recent advancement of printing techniques and bio-ink sources, which have been spurred on by the increasing demand for modeling tactics and have facilitated the development of the refined tissue models as well as the modeling strategies, followed by a state-of-the-art update on the specialized work on cancer, heart, muscle and liver. In the end, the toxicological modeling strategies, substantial challenges, and future perspectives for 3D printed tissue models were explored.

Application of Graphene in Tissue Engineering of the Nervous System

Graphene is the thinnest two-dimensional (2D), only one carbon atom thick, but one of the strongest biomaterials. Due to its unique structure, it has many unique properties used in tissue engineering of the nervous system, such as high strength, flexibility, adequate softness, electrical conductivity, antibacterial effect, and the ability to penetrate the blood-brain barrier (BBB). Graphene is also characterized by the possibility of modifications that allow for even wider application and adaptation to cell cultures of specific cells and tissues, both in vitro and in vivo. Moreover, by using the patient's own cells for cell culture, it will be possible to produce tissues and organs that can be re-transplanted without transplant rejection, the negative effects of taking immunosuppressive drugs, and waiting for an appropriate organ donor.

Design and Fabrication of Low-Cost Microfluidic Chips and Microfluidic Routing System for Reconfigurable Multi-(Organ-on-a-Chip) Assembly

A low-cost, versatile, and reconfigurable fluidic routing system and chip assembly have been fabricated and tested. The platform and its accessories were fabricated in-house without the need for costly and specialized equipment nor specific expertise. An agarose-based artificial membrane was integrated into the chips and employed to test the chip-to-chip communication in various configurations. Various chip assemblies were constructed and tested which demonstrate the versatile utility of the fluidic routing system that enables the custom design of the chip-to-chip communication and the possibility of fitting a variety of (organ-on-a-chip)-based biological models with multicell architectures. The reconfigurable chip assembly would enable selective linking/isolating the desired chip/compartment, hence allowing the study of the contribution of specific cell/tissue within the in vitro models.

Advancement of Scaffold-Based 3D Cellular Models in Cancer Tissue Engineering: An Update

The lack of traditional cancer treatments has resulted in an increased need for new clinical techniques. Standard two-dimensional (2D) models used to validate drug efficacy and screening have a low in vitro-in vivo translation potential. Recreating the in vivo tumor microenvironment at the three-dimensional (3D) level is essential to resolve these limitations in the 2D culture and improve therapy results. The physical and mechanical environments of 3D culture allow cancer cells to expand in a heterogeneous manner, adopt different phenotypes, gene and protein profiles, and develop metastatic potential and drug resistance similar to human tumors. The current application of 3D scaffold culture systems based on synthetic polymers or selected extracellular matrix components promotes signalling, survival, and cancer cell proliferation. This review will focus on the recent advancement of numerous 3D-based scaffold models for cancer tissue engineering, which will increase the predictive ability of preclinical studies and significantly improve clinical translation.

Development of alveolar-capillary-exchange (ACE) chip and its application for assessment of PM2.5-induced toxicity

Although standard two-dimensional (2D) cell culture is an effective tool for cell studies, monolayer cultivation can yield imperfect or misleading information about numerous biological functions. In this study, we developed an alveolar-capillary exchange (ACE) chip aiming to simulate the cellular microenvironment at the alveolar-capillary interface. The ACE chip was designed with two chambers for culturing alveolar epithelial cells and vascular endothelial cells separately, which are separated by a microporous polycarbonate film that allows for the exchange of soluble biomolecules. Using this model, we further tested the toxic effects of fine particulate matter (PM_2.5), a form of airborne pollutant known to induce adverse effects on human respiratory system. These effects are largely associated with the ability of PM_2.5 to penetrate the alveoli, where it negatively affects the pulmonary function. Our results indicate that alveolar epithelial cells cultured in the ACE chip in solo and coculture with vascular endothelial cells underwent oxidative injury-induced apoptosis mediated via the PEAK-eIF2α signaling pathway of endoplasmic reticulum stress. The use of ACE chip in an alveolar epithelial cell-vascular endothelial cell coculture model revealed cellular vulnerability to PM_2.5. Therefore, this chip provides a feasible surrogate approach in vitro for investigating and simulating the cellular microenvironment responses associated with ACE in vivo.

Advancements in Microfluidic Systems for the Study of Female Reproductive Biology

The female reproductive tract is a highly complex physiological system that consists of the ovaries, fallopian tubes, uterus, cervix, and vagina. An enhanced understanding of the molecular, cellular, and genetic mechanisms of the tract will allow for the development of more effective assisted reproductive technologies, therapeutics, and screening strategies for female specific disorders. Traditional 2-dimensional and 3-dimensional static culture systems may not always reflect the cellular and physical contexts or physicochemical microenvironment necessary to understand the dynamic exchange that is crucial for the functioning of the reproductive system. Microfluidic systems present a unique opportunity to study the female reproductive tract, as these systems recapitulate the multicellular architecture, contacts between different tissues, and microenvironmental cues that largely influence cell structure, function, behavior, and growth. This review discusses examples, challenges, and benefits of using microfluidic systems to model ovaries, fallopian tubes, endometrium, and placenta. Additionally, this review also briefly discusses the use of these systems in studying the effects of endocrine disrupting chemicals and diseases such as ovarian cancer, preeclampsia, and polycystic ovarian syndrome.

Alginate based 3D micro-scaffolds mimicking tumor architecture as in vitro cell culture platform

A micron scale alginate based 3D platform embedded with a carbon dot pH sensor, that enables continuous growth monitoring of encapsulated cells in real time is reported. The alginate based 3D micro-scaffold closely mimics a tumor microenvironment by providing a spatial demarcation and making it possible to encapsulate different cells in close proximity. The micro-scaffold contains carbon dot based nanosensors that enable real time monitoring of pH change in the tumor microenvironment avoiding the need for end-point assays for studying cellular growth. The micro-scaffolds have heterogeneous architecture and a hypoxic core region can be observed in as less as 96 h of culture. In this completely synthetic platform, there also exist the flexibility of artificially modifying the porosity of the micro-scaffold as per the requirement of the studies where a denser ECM mimic is required. The micro-scaffolds were conducive for cell growth as suggested by the enhanced functional profile of hepatocellular carcinoma cells and positively influence the genetic expression of the cell specific markers. Additionally, similar to a 3D tumor, non-homogeneous diffusion of molecules is also observed making this an ideal platform for cancer modelling and drug screening.

The Role of the 3Rs for Understanding and Modeling the Human Placenta

Modeling the physiology of the human placenta is still a challenge, despite the great number of scientific advancements made in the field. Animal models cannot fully replicate the structure and function of the human placenta and pose ethical and financial hurdles. In addition, increasingly stricter animal welfare legislation worldwide is incentivizing the use of 3R (reduction, refinement, replacement) practices. What efforts have been made to develop alternative models for the placenta so far? How effective are they? How can we improve them to make them more predictive of human pathophysiology? To address these questions, this review aims at presenting and discussing the current models used to study phenomena at the placenta level: in vivo, ex vivo, in vitro and in silico. We describe the main achievements and opportunities for improvement of each type of model and critically assess their individual and collective impact on the pursuit of predictive studies of the placenta in line with the 3Rs and European legislation.

3D Cell Culture Models in COVID-19 Times: A Review of 3D Technologies to Understand and Accelerate Therapeutic Drug Discovery

In the last decades, emerging viruses have become a worldwide concern. The fast and extensive spread of the disease caused by SARS-CoV-2 (COVID-19) has impacted the economy and human activity worldwide, highlighting the human vulnerability to infectious diseases and the need to develop and optimize technologies to tackle them. The three-dimensional (3D) cell culture models emulate major tissue characteristics such as the in vivo virus-host interactions. These systems may help to generate a quick response to confront new viruses, establish a reliable evaluation of the pathophysiology, and contribute to therapeutic drug evaluation in pandemic situations such as the one that humanity is living through today. This review describes different types of 3D cell culture models, such as spheroids, scaffolds, organoids, and organs-on-a-chip, that are used in virus research, including those used to understand the new severe acute respiratory syndrome-coronavirus 2 (SARS-CoV-2).

Microfluidic technologies for drug discovery and development: friend or foe?

There is a point in the evolution of every new technology when questions need to be asked regarding its usefulness and impact. Although microfluidic technologies have drastically decreased the scales at which laboratory processes can be performed and have enabled scientific advances that would have otherwise not been possible, it is time to consider whether these technologies are more disruptive than enabling. Here, my aims are to introduce researchers in the broad fields of drug discovery and development to the advantages and disadvantages of microfluidic technologies, to highlight current work showing how microfluidic technologies can be used at different stages in the drug discovery and development process, to discuss how we can transfer academic breakthroughs in the field of microfluidic technologies to industrial environments, and to examine whether microfluidic technologies have the potential to cause a fundamental paradigm shift in the way that drug discovery and development occurs.

Generation and analysis of 3D cell culture models for drug discovery

Successful preclinical drug testing relies in part on data generated using in vitro cell culture models that recapitulate the structure and function of tumours and other tissues in vivo. The growing evidence that 3D cell models can more accurately predict the efficacy of drug responses compared to traditionally utilised 2D cell culture systems has led to continuous scientific and technological advances that enable better physiologically representative in vitro modelling of in vivo tissues. This review will provide an overview of the utility of current 3D cell models from a drug screening perspective and explore the future of 3D cell models for drug discovery applications.

An inadvertent issue of human retina exposure to endocrine disrupting chemicals: A safety assessment

Endocrine disrupting chemicals (EDCs) are a group of chemical compounds that present a considerable public health problem due to their pervasiveness and associations with chronic diseases. EDCs can interrupt the endocrine system and interfere with hormone homeostasis, leading to abnormalities in human physiology. Much attention has been focused on the adverse effects EDCs have on the reproductive system, neurogenesis, neuroendocrine system, and thyroid dysfunction. The eye is usually directly exposed to the surrounding environment; however, the influences of EDCs on the eye have received comparatively little attention. Ocular diseases, such as ocular surface diseases and retinal diseases, have been implicated in hormone deficiency or excess. Epidemiologic studies have shown that EDC exposure not only causes ocular surface disorders, such as dry eye, but also associates with visual deficits and retinopathy. EDCs can pass through the human blood-retinal barrier and enter the neural retina, and can then accumulate in the retina. The retina is an embryologic extension of the central nervous system, and is extremely sensitive and vulnerable to EDCs that could be passed across the placenta during critical periods of retinal development. Subtle alterations in the retinal development process usually result in profound immediate, long-term, and delayed effects late in life. This review, based on extensive literature survey, briefly summarizes the current knowledge about the impact of representative manufactured EDCs on retinal toxicity, including retinal structure alterations and dysfunction. We also highlight the potential mechanism of action of EDCs on the retina, and the predictive retinal models of EDC exposure.

Human Retinal Microvasculature-on-a-Chip for Drug Discovery

Retinal cells within neurovascular units generate the blood-retinal barrier (BRB) to regulate the local retinal microenvironment and to limit access to inflammatory cells. Breakdown of the endothelial junctional complexes in the BRB negatively affects neuronal signaling and ultimately causes vision loss. As new therapeutics are being developed either to prevent barrier disruption or to restore barrier function, access to physiologically relevant human in vitro tissue models that recapitulate important features of barrier biology is essential for disease modeling, target validation, and toxicity assessment. Here, a tunable organ-on-a-chip model of the retinal microvasculature using human retinal microvascular endothelial cells with integrated flow is described. Automated imaging and image analysis methods are employed for facile screening of leakage mediators and cytokine inhibitors on barrier properties. The developed retinal microvasculature-on-a-chip will enable improved understanding of BRB biology and provide an additional tool for drug discovery.

A multilayered epithelial mucosa model of head neck squamous cell carcinoma for analysis of tumor-microenvironment interactions and drug development

Pharmacotherapy of head and neck squamous cell carcinoma (HNSCC) often fails due to the development of chemoresistance and severe systemic side effects of current regimens limiting dose escalation. Preclinical models comprising all major elements of treatment resistance are urgently needed for the development of new strategies to overcome these limitations. For model establishment, we used tumor cells from patient-derived HNSCC xenografts or cell lines (SCC-25, UM-SCC-22B) and characterized the model phenotype. Docetaxel and cetuximab were selected for comparative analysis of drug-related effects at topical and systemic administration. Cetuximab cell binding was mapped by cluster-based fluorescence lifetime imaging microscopy.The tumor oral mucosa (TOM) models displayed unstructured, hyper-proliferative, and pleomorphic cell layers, reflecting well the original tumor morphology and grading. Dose- and time-dependent effects of docetaxel on tumor size, apoptosis, hypoxia, and interleukin-6 release were observed. Although the spectrum of effects was comparable, significantly lower doses were required to achieve similar docetaxel-induced changes at topical compared to systemic application. Despite displaying anti-proliferative effects in monolayer cultures, cetuximab treatment showed only minor effects in TOM models. This was not due to inefficient cetuximab uptake or target cell binding but likely mediated by microenvironmental components.We developed multi-layered HNSCC models, closely reflecting tumor morphology and displaying complex interactions between the tumor and its microenvironment. Topical application of docetaxel emerged as promising option for HNSCC treatment. Aside from the development of novel strategies for topical drug delivery, our tumor model might help to better understand key regulators of drug-tumor-interactions.

Breast cancer cells grown on hyaluronic acid-based scaffolds as 3D in vitro model for electroporation

Nowadays, electroporation (EP) represents a promising method for the intracellular delivery of anticancer drugs. To setting up the process, the EP efficiency is usually evaluated by using cell suspension and adherent cell cultures that are not representative of the in vivo conditions. Indeed, cells are surrounded by extracellular matrix (ECM) whose composition and physical characteristics are different for each tissue. So, various three-dimensional (3D) in vitro models, such as spheroids and hydrogel-based cultures, have been proposed to mimic the tumour microenvironment. Herein, a 3D breast cancer in vitro model has been proposed. HCC1954 cells were seeded on crosslinked and lyophilized matrices composed of hyaluronic acid (HA) and ionic complementary self-assembling peptides (SAPs) already known to provide a fibrous structure mimicking collagen network. Herein, SAPs were functionalized with laminin derived IKVAV adhesion motif. Cultures were characterized by spheroids surrounded by ECM produced by cancer cells as demonstrated by collagen1a1 and laminin B1 transcripts. EP was carried out on both 2D and 3D cultures: a sequence of 8 voltage pulses at 5 kHz with different amplitude was applied using a plate electrode. Cell sensitivity to EP seemed to be modulated by the presence of ECM and the different cell organization. Indeed, cells cultured on HA-IKVAV were more sensitive than those treated in 2D and HA cultures, in terms of both cell membrane permeabilization and viability. Collectively, our results suggest that HA-IKVAV cultures may represent an interesting model for EP studies. Further studies will be needed to elucidate the influence of ECM composition on EP efficiency.

Organ-on-a-chip engineering: Toward bridging the gap between lab and industry

Organ-on-a-chip (OOC) is a very ambitious emerging technology with a high potential to revolutionize many medical and industrial sectors, particularly in preclinical-to-clinical translation in the pharmaceutical arena. In vivo, the function of the organ(s) is orchestrated by a complex cellular structure and physiochemical factors within the extracellular matrix and secreted by various types of cells. The trend in in vitro modeling is to simplify the complex anatomy of the human organ(s) to the minimal essential cellular structure "micro-anatomy" instead of recapitulating the full cellular milieu that enables studying the absorption, metabolism, as well as the mechanistic investigation of drug compounds in a "systemic manner." However, in order to reflect the human physiology in vitro and hence to be able to bridge the gap between the in vivo and in vitro data, simplification should not compromise the physiological relevance. Engineering principles have long been applied to solve medical challenges, and at this stage of organ-on-a-chip technology development, the work of biomedical engineers, focusing on device engineering, is more important than ever to accelerate the technology transfer from the academic lab bench to specialized product development institutions and to the increasingly demanding market. In this paper, instead of presenting a narrative review of the literature, we systemically present a synthesis of the best available organ-on-a-chip technology from what is found, what has been achieved, and what yet needs to be done. We emphasized mainly on the requirements of a "good in vitro model that meets the industrial need" in terms of the structure (micro-anatomy), functions (micro-physiology), and characteristics of the device that hosts the biological model. Finally, we discuss the biological model-device integration supported by an example and the major challenges that delay the OOC technology transfer to the industry and recommended possible options to realize a functional organ-on-a-chip system.

Integrating Biophysics in Toxicology

Integration of biophysical stimulation in test systems is established in diverse branches of biomedical sciences including toxicology. This is largely motivated by the need to create novel experimental setups capable of reproducing more closely in vivo physiological conditions. Indeed, we face the need to increase predictive power and experimental output, albeit reducing the use of animals in toxicity testing. In vivo, mechanical stimulation is essential for cellular homeostasis. In vitro, diverse strategies can be used to model this crucial component. The compliance of the extracellular matrix can be tuned by modifying the stiffness or through the deformation of substrates hosting the cells via static or dynamic strain. Moreover, cells can be cultivated under shear stress deriving from the movement of the extracellular fluids. In turn, introduction of physical cues in the cell culture environment modulates differentiation, functional properties, and metabolic competence, thus influencing cellular capability to cope with toxic insults. This review summarizes the state of the art of integration of biophysical stimuli in model systems for toxicity testing, discusses future challenges, and provides perspectives for the further advancement of in vitro cytotoxicity studies.

The evolution of strategies to minimise the risk of human drug-induced liver injury (DILI) in drug discovery and development

Early identification of toxicity associated with new chemical entities (NCEs) is critical in preventing late-stage drug development attrition. Liver injury remains a leading cause of drug failures in clinical trials and post-approval withdrawals reflecting the poor translation between traditional preclinical animal models and human clinical outcomes. For this reason, preclinical strategies have evolved over recent years to incorporate more sophisticated human in vitro cell-based models with multi-parametric endpoints. This review aims to highlight the evolution of the strategies adopted to improve human hepatotoxicity prediction in drug discovery and compares/contrasts these with recent activities in our lab. The key role of human exposure and hepatic drug uptake transporters (e.g. OATPs, OAT2) is also elaborated.

Three-dimensional cell culture models for metallodrug testing: induction of apoptosis and phenotypic reversion of breast cancer cells by the trans-[Ru(PPh3)2(N,N-dimethyl-N-thiophenylthioureato-k2O,S)(bipy)]PF6 complex

Effects of trans-[Ru(PPh₃)2(N,N-dimethyl-N-thiophenylthioureato-k₂O,S)(bipy)]PF₆ complex on cytotoxicity, on the induction of apoptosis and on the phenotypic reversion of tumor cells in different 3D culture techniques.

An oxygen-releasing device to improve the survival of mesenchymal stem cells in tissue engineering

Supplying oxygen to inner areas of cell constructs to support cell proliferation and metabolism is a major challenge in tissue engineering involving stem cells. Developing devices that incorporate oxygen release materials to increase the availability of the localized oxygen supply is therefore key to addressing this limitation. Herein, we designed and developed a 3D-printed oxygen-releasing device composed of an alginate hydrogel scaffold combined with an oxygen-generating biomaterial (calcium peroxide) to improve the oxygen supply of the microenvironment for culturing adipose tissue-derived stem cells. The results demonstrated that the 3D-printed oxygen-releasing device alleviated hypoxia, maintained oxygen availability, and ensured proliferation of the embedded cells, whilst also reducing hypoxia-induced apoptosis. The introduction of this 3D-printed oxygen-releasing device could enhance the survival of embedded stem cells.

Organ-On-A-Chip Technologies for Advanced Blood-Retinal Barrier Models

The blood-retinal barrier (BRB) protects the retina by maintaining an adequate microenvironment for neuronal function. Alterations of the junctional complex of the BRB and consequent BRB breakdown in disease contribute to a loss of neuronal signaling and vision loss. As new therapeutics are being developed to prevent or restore barrier function, it is critical to implement physiologically relevant in vitro models that recapitulate the important features of barrier biology to improve disease modeling, target validation, and toxicity assessment. New directions in organ-on-a-chip technology are enabling more sophisticated 3-dimensional models with flow, multicellularity, and control over microenvironmental properties. By capturing additional biological complexity, organs-on-chip can help approach actual tissue organization and function and offer additional tools to model and study disease compared with traditional 2-dimensional cell culture. This review describes the current state of barrier biology and barrier function in ocular diseases, describes recent advances in organ-on-a-chip design for modeling the BRB, and discusses the potential of such models for ophthalmic drug discovery and development.

Modelling Toxoplasma gondii infection in a 3D cell culture system In Vitro: Comparison with infection in 2D cell monolayers

Three-dimensional (3D) cell culture models bridge the gap between two-dimensional (2D) monolayer cultures and animal models. Physiologically relevant, 3D culture models have significantly advanced basic cell science and provide unique insights into host-pathogen interactions intrinsically linked to cell morphology. Toxoplasma gondii is an obligate intravacuolar parasite that chronically infects a large portion of the global human population. Our current understanding of Toxoplasma infection is largely based on 2D cell cultures, in which mammalian cells are grown on flat surfaces. However, 2D cell cultures may not recapitulate key conditions of in vivo infections as they introduce artificial pressures and tensions, which may subsequently alter infectious processes that are dependent on spatiality, e.g., invasion, replication and egress. In this study, we adapted a collagen-based 3D cell culture system to reproduce the 3D environment of T. gondii natural infections for investigation of the replication and egress of the parasite from the parasitophorous vacuole. Suspended in the 3D matrix, Toxoplasma-infected VERO cells have round morphology, as opposed to infected VERO cells in 2D monolayers. The doubling time of Toxoplasma in VERO cells within the matrix is comparable to that of parasites cultivated in VERO cell monolayers. In the absence of the pressure of flattened host cells grown in 2D cultures, the parasitophorous vacuole of T. gondii has a globular shape, with intravacuolar parasites distributed radially, forming 3D spherical ‘rosette’ structures. Parasites egress radially away from the ruptured host cell in 3D matrices, in contrast to Toxoplasma cultivated in 2D monolayer cultures, where the parasites escape perpendicularly from the flat surface below the host cells. These observations demonstrate the utility of collagen matrices for studying parasite modes of infection as these 3D assays more closely mimic in vivo conditions.

Methods for fabrication and evaluation of a 3D microengineered model of myelinated peripheral nerve

OBJECTIVE

The cost and low success rates of the neurological drug development pipeline have diverted the pharmaceutical industry to 'nerve-on-a-chip' systems as preclinical models to streamline drug development. We present a novel micro-engineered 3D hydrogel platform for the culture of myelinated embryonic peripheral neural tissue to serve as an effective in vitro model for electrophysiological and histological analysis that could be adopted for preclinical testing.

APPROACH

Dorsal root ganglions (DRG) from 15 d old embryonic rats were cultured in 3D hydrogel platforms. The interaction between Schwann cells (SC) and neurons during axonal development and regeneration affects the direction of growth and the synthesis of myelin sheaths. Induction of myelination was performed with two approaches: the addition of exogenous SC and promoting migration of endogenous SC.

MAIN RESULTS

Histological analysis of the preparation utilizing exogenous SC showed aligned, highly fasciculated axonal growth with noticeable myelin sheaths around axons. Separately, electrophysiological testing of the preparation utilizing endogenous SC showed increased amplitude of the compound action potential and nerve conduction velocity in the presence of ascorbic acid (AA).

SIGNIFICANCE

This platform has immense potential to be a useful and translatable in vitro testing tool for drug discovery and myelination studies.

Hydrogels in three-dimensional dendritic cell (MUTZ-3) culture as a scaffold to mimic human immuno competent subcutaneous tissue

The objective of this study was to develop a 3D cell culture model of the human subcutaneous tissue, allowing the prediction of the immunogenicity of subcutaneously injected therapeutic proteins. Several hydrogels were evaluated as scaffolds to mimic the human subcutaneous tissue in vitro. Cytocompatibility of the hydrogels with the human myelomonocytic cell line (MUTZ-3) was investigated, as well as their influence on cellular phenotype changes. Elastic Young's moduli in compression of the hydrogels were measured by a texture analyser and compared to ex vivo human samples. MUTZ-3 cells were differentiated into dendritic cells before embedding in hydrogels. Agarose at various concentrations (0.5%, 0.35% and 0.25% w/v), Geltrex® matrix and HyStem™ scaffold (1% w/v) displayed a wide range of elastic Young's moduli from 560 kPa to 49 kPa, compared to the reference value of 23 kPa obtained for human tissue. With the exception of HyStem™, good cytocompatibility of hydrogels was shown at the concentrations tested. An optimal combination of MUTZ-3 cells with 0.25% agarose or Geltrex® is suggested.

Microenvironment-Cell Nucleus Relationship in the Context of Oxidative Stress

The microenvironment is a source of reactive oxygen species (ROS) that influence cell phenotype and tissue homeostasis. The impact of ROS on redox pathways as well as directly on epigenetic mechanisms and the DNA illustrate communication with the cell nucleus. Changes in gene transcription related to redox conditions also influence the content and structure of the extracellular matrix. However, the importance of microenvironmental ROS for normal progression through life and disease development still needs to be thoroughly understood. We illustrate how different ROS concentration levels trigger various intracellular pathways linked to nuclear functions and determine processes necessary for the differentiation of stem cells. The abnormal predominance of ROS that leads to oxidative stress is emphasized in light of its impact on aging and diseases related to aging. These phenomena are discussed in the context of the possible contribution of extracellular ROS via direct diffusion into cells responsible for organ function, but also via an impact on stromal cells that triggers extracellular modifications and influences mechanotransduction. Finally, we argue that organs-on-a-chip with controlled microenvironmental conditions can help thoroughly grasp whether ROS production is readily a cause or a consequence of certain disorders, and better understand the concentration levels of extracellular ROS that are necessary to induce a switch in phenotype.

Organs-on-a-Chip: A Fast Track for Engineered Human Tissues in Drug Development

Organs-on-a-chip (OOCs) are miniature tissues and organs grown in vitro that enable modeling of human physiology and disease. The technology has emerged from converging advances in tissue engineering, semiconductor fabrication, and human cell sourcing. Encompassing innovations in human stem cell technology, OOCs offer a promising approach to emulate human patho/physiology in vitro, and address limitations of current cell and animal models. Here, we review the design considerations for single and multi-organ OOCs, discuss remaining challenges, and highlight the potential impact of OOCs as a fast-track opportunity for tissue engineering to advance drug development and precision medicine.