Degradation of 32 emergent contaminants by UV and neutral photo-fenton in domestic wastewater effluent previously treated by activated sludge

From challenge to opportunity: Revolutionizing the monitoring of emerging contaminants in water with advanced sensors

Emerging contaminants in water represent long-term and unpredictable threats to both environmental and human health due to their persistence and bioaccumulation. Current research predominantly focuses on their removal rather than sustained monitoring. This review comprehensively investigates advanced sensor technologies for detecting these contaminants in water, critically evaluating biosensors, optical sensors, electrochemical sensors, and nanomaterial sensors. Elucidating the operational principles, performance metrics such as detection thresholds, and the pros and cons of their practical applications, the review addresses a significant research gap in environmental monitoring. Moreover, it enhances understanding of sensor effectiveness, which in turn guides researchers in selecting the right sensor types for various environmental scenarios. Furthermore, by emphasizing the integration of nanotechnology and the standardization of evaluation protocols, it promotes the development of robust, deployable sensing solutions. Ultimately, this leads to the proposal of a strategic framework aimed at significantly improving the detection capabilities of emerging contaminants and supporting the preservation of environmental health.

Experimental study on attenuation effect of liquid viscosity on shockwaves of cavitation bubbles collapse

How to precisely control and efficiently utilize the physical processes such as high temperature, high pressure, and shockwaves during the collapse of cavitation bubbles is a focal concern in the field of cavitation applications. The viscosity change of the liquid will affect the bubble dynamics in turn, and further affect the precise control of intensity of cavitation field. This study used high-speed photography technology and schlieren optical path system to observe the spatiotemporal evolution of shockwaves in liquid with different viscosities. It was found that as the viscosity of the liquid increased, the wave front of the collapse shockwave of the cavitation bubble gradually thickened. Furthermore, a high-frequency pressure testing system was used to quantitatively analyze the influence of viscosity on the intensity of the shockwave. It was found that the pressure peak of the shockwave in different viscous liquid was proportional to Lb (L represented the distance between the center of bubble and the sensor measuring point), and the larger the viscosity was, the smaller the value of b was. Through in-depth analysis, it was found that as the viscosity of the liquid increased, the proportion of the shockwave energy of first bubble collapse to the maximal mechanical energy of bubble gradually decreased. The proportion of the mechanical energy of rebounding bubble to the maximal mechanical energy of bubble gradually increased. These new findings have an important theoretical significance for the efficient utilization of ultrasonic cavitation.

Degradation of cefixime by photocatalysis via Ba-doped BiFeO3 nanomaterial using RSM analysis under LED light source

In the current work, Response Surface Methodology (RSM)-a statistical method-is used to optimize procedures like photocatalysis with the least amount of laboratory testing. However, to determine the most effective model for achieving the maximum rate of removal efficiency, the Response Surface Methodology was employed. The Ba-doped BiFeO3 photocatalyst was synthesized by the co-precipitation method, and its intrinsic properties were investigated by utilizing a range of spectroscopic techniques, such as FESEM, EDX, XRD, FTIR, and UV-vis. Herein, four independent factors such as, pH, contact time, pollutant concentration, and catalyst dosage were chosen. The results revealed that under acidic conditions with a contact duration of 2 min, a moderate catalyst dosage, and higher pollutant concentration, a degradation rate of 89.8% was achieved. The regression coefficient (R2) and probability value (P) were determined to be 0.99551 and 0.0301, respectively, therefore confirming the excellent fit of the RSM model. Furthermore, this research investigated the potential photocatalytic degradation mechanisms of cefixime, demonstrating that the removal efficiency of cefixime is greatly influenced by the functional parameters.

Recent updates on remediation approaches of environmentally occurring pollutants using visible light-active nano-photocatalysts

Photocatalysis emerges as a potential remedy for the issue of an unreliable light source. Recognized as the most dependable and potent energy source sustaining life on Earth, sunlight offers a promising solution. Sunlight is abundant and free, operational costs associated with running photocatalytic system using nanoparticles are often lower compared to system relying on artificial light source. The escalating problem of water pollution, particularly in highly industrialized nations, necessitates effective wastewater treatment methods. These methods aim to combat elevated pollution levels, encompassing pharmaceuticals, dyes, flame retardants, and pesticide components. Advanced oxidation processes within photocatalytic wastewater treatment exhibit substantial promise for removing complex organic pollutants. Doped nanomaterials, with their enhanced properties, enable efficient utilization of light. Coupled nanomaterials present significant potential in addressing both water and energy challenges by proficiently eliminating persistent pollutants from environment. Photocatalysis when exposed to sunlight can absorb photons and generate e- h + pairs. This discussion briefly outlines the wastewater treatment facilitated by interconnected nanomaterials, emphasizing their role in water-energy nexus. In exploring the capabilities of components within a functional photocatalyst, a comprehensive analysis of both simple photocatalysts and integrated photocatalytic systems is undertaken. Review aims to provide detailed explanation of the impact of light source on photon generation and significance of solar light on reaction kinetics, considering various parameters such as catalyst dosage, pH, temperature, and types of oxidants. By shedding light on these aspects, this review seeks to enhance our understanding of intricate processes involved in photocatalysis and its potential applications in addressing contemporary environmental challenges.

Acute and subchronic effects of ibuprofen on the ten spotted live-bearer fish Cnesterodon decemmaculatus (Jenyns, 1842)

Ibuprofen (IBP) is an anti-inflammatory drug found in aquatic environments, potentially toxic for the biota. We exposed the test fish C. decemmaculatus to two environmentally relevant concentrations (50 and 100 μg IBP/L) for 4 and 12 d and evaluated the effect on some biomarkers. Micronucleus test, nuclear abnormality test and comet assay indicated cyto-genotoxicity at both concentrations and exposure periods. Oxidative stress and biochemical biomarkers were not affected, excepting muscle AChE activity for 4 d. Muscle metabolic biomarkers showed significant decrease in ETS, lipid and protein content, while carbohydrate content was not affected. The CEA index increased at the lower IBP concentration for 4 and 12 d, possibly due to changes in body energy reserves. A full-factorial GLM performed to assess the effects of IBP and exposure times showed that the metabolic and genotoxicity biomarkers were the most sensitive to IBP toxicity, mainly at 50 μg IBP/L for 4 d.

A review of hybrid enzymatic-chemical treatment for wastewater containing antiepileptic drugs

Epilepsy is one of the most common neurological diseases worldwide and requires treatment with antiepileptic drugs for many years or for life. This fact leads to the need for constant production and use of these compounds, placing them among the four pharmaceutical classes most found in wastewater. Even at low concentrations, antiepileptics pose risks to human and environmental health and are considered organic contaminants of emerging concern. Conventional treatments have shown low removal of these drugs, requiring advanced and innovative approaches. In this context, this review covers the results and perspectives on (1) consumption and occurrence of antiepileptics in water, (2) toxicological effects in aquatic ecosystems, (3) enzymatic and advanced oxidation processes for degrading antiepileptics drugs from a molecular point of view (biochemical and chemical phenomena), (4) improvements in treatment efficiency by hybridization, and (5) technical aspects of the enzymatic-AOP reactors.

Post-treatment disinfection technologies for sustainable removal of antibiotic residues and antimicrobial resistance bacteria from hospital wastewater

The World Health Organization (WHO) has identified antimicrobial resistance bacteria and its spread as one of the most serious threats to public health and the environment in the twenty-first century. Different treatment scenarios are found in several countries, each with their own regulations and selection criteria for the effluent quality and management practices of hospital wastewater. To prevent the spread of disease outbreaks and other environmental threats, the development of sustainable treatment techniques that remove all antibiotics and antimicrobial resistant bacteria and genes should be required. Although few research based articles published focusing this issues, explaining the drawbacks and effectiveness of post-treatment disinfection strategies for eliminating antibiotic residues and antimicrobial resistance from hospital wastewater is the reason of this review. The application of conventional activated sludge (CAS) in large scale hospital wastewater treatments poses high energy supply needs for aeration, capital and operational costs. Membrane bioreactors (MBR) have also progressively replaced the CAS treatment systems and achieved better treatment potential, but membrane fouling, energy cost for aeration, and membrane permeability loss restrict their performance at large scale operations. In addition, the membrane process alone doesn't completely remove/degrade these micropollutants; as a substitute, the pollutants are being concentrated in a smaller volume, which requires further post-treatment. Therefore, these drawbacks should be solved by developing advanced techniques to be integrated into any of these or other secondary wastewater treatment systems, aiming for the effective removal of these micropollutants. The purpose of this paper is to review the performances of post-treatment disinfection technologies in the removal of antibiotics, antimicrobial resistant bacteria and their gens from hospital wastewater. The performance of advanced disinfection technologies (such as granular and powered activated carbon adsorption, ozonation, UV, disinfections, phytoremediation), and other integrated post-treatment techniques are primarily reviewed. Besides, the ecotoxicology and public health risks of hospital wastewater, and the development, spreading and mechanisms of antimicrobial resistant and the protection of one health are also highlighted.

Treatment Trends and Combined Methods in Removing Pharmaceuticals and Personal Care Products from Wastewater-A Review

When discharged into wastewater, pharmaceuticals and personal care products (PPCPs) become microorganic contaminants and are among the largest groups of emerging pollutants. Human, animal, and aquatic organisms' exposures to PPCPs have linked them to an array of carcinogenic, mutagenic, and reproductive toxicity risks. For this reason, various methods are being implemented to remove them from water bodies. This report critically reviews these methods and suggests improvements to removal strategies. Biological, physical, and chemical methods such as biological degradation, adsorption, membrane filtration, and advanced electrical and chemical oxidation are the common methods used. However, these processes were not integrated into most studies to take advantage of the different mechanisms specific to each process and are synergistic in the removal of the PPCPs that differ in their physical and chemical characteristics (charge, molecular weight, hydrophobicity, hydrogen bonding, structure). In the review articles published to date, very little information is available on the use of such integrated methods for removing PPCPs. This report attempts to fill this gap with our knowledge.

Removal of Pharmaceuticals and Personal Care Products (PPCPs) by Free Radicals in Advanced Oxidation Processes

As emerging pollutants, pharmaceutical and personal care products (PPCPs) have received extensive attention due to their high detection frequency (with concentrations ranging from ng/L to μg/L) and potential risk to aqueous environments and human health. Advanced oxidation processes (AOPs) are effective techniques for the removal of PPCPs from water environments. In AOPs, different types of free radicals (HO·, SO₄·^-, O₂·^-, etc.) are generated to decompose PPCPs into non-toxic and small-molecule compounds, finally leading to the decomposition of PPCPs. This review systematically summarizes the features of various AOPs and the removal of PPCPs by different free radicals. The operation conditions and comprehensive performance of different types of free radicals are summarized, and the reaction mechanisms are further revealed. This review will provide a quick understanding of AOPs for later researchers.

Removal of emerging pollutants by a 3-step system: Hybrid digester, vertical flow constructed wetland and photodegradation post-treatments

The removal of emerging pollutants from municipal wastewater was studied for the first time using a three-step pilot-scale system: 1) hybrid digester (HD) as first step, 2) subsurface vertical flow constructed wetland (VF) as second step, and 3) photodegradation (PD) unit as third step or post-treatment. The HD and VF units were built and operated in series with effluent recirculation at pilot scale. For the PD post-treatment, three alternatives were studied at lab-scale, i) UVC irradiation at 254 nm (0.5 h exposure time), ii) UVA irradiation at 365 nm using a TiO₂-based photocatalyst and iii) sunlight irradiation using a TiO₂-based photocatalyst, the last two for 1 and 2 h. Alternative iii) was also tested at pilot-scale. Degradation of nine compounds was evaluated: acetaminophen (ACE), caffeine (CAF), carbamazepine (CBZ), ketoprofen (KET), ibuprofen (IBU), diclofenac (DCL), clofibric acid (ACB), bisphenol A (BPA), and sotalol (SOT). Overall, the HD-VF-UVC system completely removed (>99.5 %) ACE, CAF, KET, IBU, DCL and ACB, and to a lesser extent SOT (98 %), BPA (83 %) and CBZ (51 %). On the other hand, the HD-VF-UVA/TiO₂ system (at 2 h) achieved >99.5 % removal of ACE, CAF, KET, IBU and DCL while ACB, BPA, CBZ and SOT were degraded by 83 %, 81 %, 78 % and 68 %, respectively. Working also at 2 h of exposure time, in summer conditions, the HD-VF-Sol/TiO₂ system achieved >99.5 % removal of ACE, CAF, KET, IBU, DCL and ACB, and to a minor extent BPA (80 %), SOT (74 %) and CBZ (69 %). Similar results, although slightly lower for SOT (60 %) and CBZ (59 %), were obtained in the pilot sunlight plus TiO₂ catalyst unit. However, the use of sunlight irradiation with a TiO₂-based photocatalyst clearly showed lower removal efficiency in autumn conditions (i.e., 47 % SOT, 31 % CBZ).

Removal of persistent organic pollutants and disinfection of pathogens from secondary treated municipal wastewater using advanced oxidation processes

An affordable and sustainable tertiary treatment is imperative to solve the secondary contamination issues related to wastewater reuse. To decontaminate and disinfect the actual secondary treated wastewater, various types of advanced oxidation processes (AOPs) have been studied. The optimization of the oxidant and catalyst is carried out to identify the best-performing system. Under selected experimental conditions, UV/peroxymonosulfate (PMS), O₃/PMS, UV/MnO₂, O₃/MnO₂, UV/O₃/H₂O₂, O₃/MnO₂/H₂O₂, UV/MnO₂/H₂O₂, and UV/O₃/MnO₂ has been identified as an efficient treatment option for simultaneous decontamination (>90% COD removal) and disinfection (100% inactivation of the total viable count of bacteria). The techno-economic assessment revealed that UV/MnO₂ (23.5 $ kg^-1 of COD) UV/O₃/MnO₂ (37.4 $ kg^-1 of COD), UV/H₂O₂/MnO₂ (36.4 $ kg^-1 of COD), and O₃/MnO₂/H₂O₂ (32.5 $ kg^-1 of COD) are comparatively low-cost treatment processes. Overall, UV/MnO₂, UV/H₂O₂/MnO₂, and O₃/MnO₂/H₂O₂ are the three best treatments. Nevertheless, further investigation on by-product and catalyst toxicity/recovery is needed. The results showed that AOPs are a technologically feasible treatment for simultaneously removing persistent organic pollutants and pathogens from secondary treated wastewater.

Cosmetic wastewater treatment technologies: a review

Over the past three decades, environmental concerns about the water pollution have been raised on societal and industrial levels. The presence of pollutants stemming from cosmetic products has been documented in wastewater streams outflowing from industrial as well as wastewater treatment plants. To this end, a series of consistent measures should be taken to prevent emerging contaminants of water resources. This need has driven the development of technologies, in an attempt to mitigate their impact on the environment. This work offers a thorough review of existing knowledge on cosmetic wastewater treatment approaches, including, coagulation, dissolved air flotation, adsorption, activated sludge, biodegradation, constructed wetlands, and advanced oxidation processes. Various studies have already documented the appearance of cosmetics in samples retrieved from wastewater treatment plants (WWTPs), which have definitely promoted our comprehension of the path of cosmetics within the treatment cycle; however, there are still multiple blanks to our knowledge. All treatments have, without exception, their own limitations, not only cost-wise, but also in terms of being feasible, effective, practical, reliable, and environmentally friendly.

Mesocosm constructed wetlands to remove micropollutants from wastewater treatment plant effluent: Effect of matrices and pre-treatments

The contamination of the aquatic environment by micropollutants (MPs) brings risks for the ecosystem and human health. Constructed wetlands (CWs) were an eco-friendly technology to remove MPs from wastewater treatment plant effluent. In this study, the removal of MPs was evaluated in seven vertical flow mesocosm CWs with different configurations, including different support matrices (sand and a combination of bark-biochar), light pre-treatments (UVC and sunlight) or bioaugmentation in support matrices (activated sludge). The CWs with bark-biochar as support matrix significantly enhanced the removal of irbesartan and carbamazepine (>40 %), compared to the CW filled with the conventional support matrix sand. UVC irradiation as pre-treatment was more efficient in removing MPs than sunlight irradiation. After UVC pre-treatment, less MPs accumulated in the plants in the subsequent CW unit compared to the CW unit without any pre-treatment. Moreover, in the UVC combined CW system, less sulfamethoxazole, furosemide, mecoprop and diclofenac were accumulated in the plants (<0.5 μg) than other MPs (>3 μg). The addition of 0.5 % activated sludge combined with the aeration of influent did not improve MP removal in the CW. Considering the application, a bark-biochar based CW combined with UVC pre-treatment will result in more MP removal than a conventional sand CW.

Metformin as an emerging concern in wastewater: Occurrence, analysis and treatment methods

Metformin is a wonder drug used as an anti-hypoglycemic medication; it is also used as a cancer suppression medicament. Metformin is a first line of drug choice used by doctors for patients with type 2 diabetes. It is used worldwide where the drug's application varies from an anti-hypoglycemic medication to cancer oppression and as a weight loss treatment drug. Due to its wide range of usage, metformin and its byproducts are found in waste water and receiving aquatic environment. This leads to the accumulation of metformin in living beings and the environment where excess concentration levels can lead to ailments such as lactic acidosis or vitamin B12 deficiency. This drug could become of future water treatment concerns with its tons of production per year and vast usage. As a result of continuous occurrence of metformin has demanded the need of implementing and adopting different strategies to save the aquatic systems and the exposure to metformin. This review discuss the various methods for the elimination of metformin from wastewater. Along with that, the properties, occurrence, and health and environmental impacts of metformin are addressed. The different analytical methods for the detection of metformin are also explained. The main findings are discussed with respect to the management of metformin as an emerging contaminants and the major recommendations are discussed to understand the major research gaps.

Impacts of the COVID-19 pandemic on pharmaceuticals in wastewater treated for beneficial reuse: Two case studies in central Pennsylvania

During the COVID-19 pandemic, wastewater surveillance was leveraged as a powerful tool for monitoring community-scale health. Further, the well-known persistence of some pharmaceuticals through wastewater treatment plants spurred concerns that increased usage of pharmaceuticals during the pandemic would increase the concentrations in wastewater treatment plant effluent. We collected weekly influent and effluent samples from May 2020 through May 2021 from two wastewater treatment plants in central Pennsylvania, the Penn State Water Reclamation Facility and the University Area Joint Authority, that provide effluent for beneficial reuse, including for irrigation. Samples were analyzed for severe acute respiratory syndrome coronavirus 2 (influent only), two over-the-counter medicines (acetaminophen and naproxen), five antibiotics (ampicillin, doxycycline, ofloxacin, sulfamethoxazole, and trimethoprim), two therapeutic agents (remdesivir and dexamethasone), and hydroxychloroquine. Although there were no correlations between pharmaceutical and virus concentration, remdesivir detection occurred when the number of hospitalized patients with COVID-19 increased, and dexamethasone detection co-occurred with the presence of patients with COVID-19 on ventilators. Additionally, Penn State decision-making regarding instruction modes explained the temporal variation of influent pharmaceutical concentrations, with detection occurring primarily when students were on campus. Risk quotients calculated for pharmaceuticals with known effective and lethal concentrations at which 50% of a population is affected for fish, daphnia, and algae were generally low in the effluent; however, some acute risks from sulfamethoxazole were high when students returned to campus. Remdesivir and dexamethasone persisted through the wastewater treatment plants, thereby introducing novel pharmaceuticals directly to soils and surface water. These results highlight connections between human health and water quality and further demonstrate the broad utility of wastewater surveillance.

Removal of micropollutants by UASB reactor and post-treatment by Fenton and photo-Fenton: Matrix effect and toxicity responses

Literature is scarce on the performance of Fenton-based processes as post-treatment of municipal wastewater treated by upflow anaerobic sludge blanket (UASB) reactor. This study aims to perform Fenton and photo-Fenton from UASB influent and effluent matrices to remove micropollutants (MPs) models: atrazine (ATZ), rifampicin (RIF), and 17α-ethynylestradiol (EE2). A UASB reactor at bench-scale (14 L) was operated with these MPs, and the AOPs experiments at bench-scale were performed on a conventional photochemical reactor (1 L). A high-pressure vapor mercury lamp was used for photo-Fenton process (UVA-Vis) as a radiation source. Microcrustacean Daphnia magna (acute toxicity) and seeds of Lactuca sativa (phytotoxicity) were indicator organisms for toxicity monitoring. The UASB reactor showed stability removing 90% of the mean chemical oxygen demand, and removal efficiencies for ATZ, RIF, and EE2 were 16.5%, 45.9%, and 15.7%, respectively. A matrix effect was noted regarding the application of both Fenton and photo-Fenton in UASB influent and effluent to remove MPs and toxicity responses. The pesticide ATZ was the most recalcitrant compound, yet the processes carried out from UASB effluent achieved removal >99.99%. The post-treatment of the UASB reactor by photo-Fenton removed acute toxicity in D. magna for all treatment times. However, only the photo-Fenton conducted for 90 min did not result in a phytotoxic effect in L. sativa.

Surface-catalyzed electro-Fenton with flexible nanocatalyst for removal of plasticizers from secondary wastewater effluent

Activation of H₂O₂ with metal-free catalysts is an efficient and environmentally benign alternative to electron-Fenton (EF) for organics degradation. In the present study, flexible nanocatalysts were synthesized with self-regulated metal oxide nanoparticles (FeOx NPs) for efficient removal of plasticizers from secondary wastewater effluent (SWE). Compared with NGr/EF and FeOx@Gr/EF systems, FeOx@NGr/EF could enhance the decay kinetics of plasticizers by 3.9-4.4 times and reduce 48-59% of the disposal cost. Reactive oxygen species tests and trapping experiments proved that the surface-catalyzed EF effectively broadened the range of solution pH. Density functional theory calculations coupled with electrochemical measurements indicated that the electron transfer rates between Fe-O-C atoms were enhanced with N-doping due to strong interactions between N-Fe bond. The synergistic effects of FeOx and N could improve the oxygen reduction activity for H₂O₂ generation, and accelerate electron transfer between FeOx/NGr and H₂O₂ for ^•OH generation, offering an alternative for wastewater treatment.

Iron oxide nanoparticles embedded in organic microparticles from Yerba Mate useful for remediation of textile wastewater through a photo-Fenton treatment: Ilex paraguariensis as a platform of environmental interest - Part 1

Seven composites of iron oxide nanoparticles embedded in organic microparticles mediated by Cu(II) were synthesized using yerba mate (Ilex paraguariensis) dry leaf extract as precipitant, capping agent, and dispersant medium, using different Cu/Fe molar ratios. A thorough characterization of the particles by transmission electron microscopy (TEM), X-ray diffraction (XRD), thermogravimetric analysis-mass spectrometry (TGA-MS), Fourier transform infrared spectrometer (FTIR), and atomic absorption-spectrometry (AA) indicates that all materials have spheric-like morphology with nanoparticles composed by metal oxide phases embedded into organic microparticles. Interestingly, this organic matter is proposed to play an important role in the solids' photocatalytic activity in a photo-Fenton reaction, in which iron photo-leaching was elucidated, and a mechanism through ligand-to-metal charge transfer processes was proposed. All materials showed catalytic activity in the methyl orange elimination, achieving discolorations up to 96% in 2 h under UV irradiation at 375 nm. An experimental correlation between all samples' UV/Vis spectra and their performances for methyl orange discoloration was observed. This process opens a landscape very interesting for the use of agroindustrial residues for green synthesis of metal oxide nanomaterials and their use and understanding of organo-metallic systems participation in Fenton-based processes.

Natural Volcanic Material as a Sustainable Photocatalytic Material for Pollutant Degradation under Solar Irradiation

Recently, photocatalysis has been demonstrated as a solid approach for efficient wastewater cleaning. Using natural materials as photocatalysts means a promising solution to develop green catalysts for environmental purposes. This work aimed to study the suitability of a natural volcanic material (La Gomera, Canary Islands, Spain) as a photocatalytic material for the degradation of pollutants in wastewater with solar energy. After analysing the properties of the natural material (BET surface 0.188 m²/g and band-gap of 3 eV), the photocatalytic activity was evaluated at laboratory and pilot plant scale for the degradation of methylene blue (MB) in water (50 mg L⁻¹), at 20 °C, during a period of 4 h, under UV/Vis light and solar irradiation. Photolytic and adsorption studies were developed to distinguish the photocatalytic contribution to the wastewater decontamination process by photocatalysis. Our results enable us to determine the viability of black sand as a photocatalytic material activated by solar irradiation (photodegradation of MB up to 100% by using solar energy), developing a natural and green photocatalytic system with significantly high potential for application in a sustainable wastewater cleaning process.

Degradation of tris(2-chloroethyl) phosphate (TCEP) by thermally activated persulfate: Combination of experimental and theoretical study

Organophosphorus esters (OPEs), one kind of the emerging contaminants with high frequency of detection, is rather refractory in natural environment, thus posing great threat to human health. This study investigated the feasibility and mechanism of tris(2-chloroethyl) phosphate (TCEP) degradation in thermally activated persulfate (TAP) system. Influence of impact factors, such as PDS dosage, temperature, initial pH, and presence of natural water matrix (Cl^-, NO₃^-, H₂PO₄^-, NH₄⁺, humic acid), were evaluated. Results showed that 100% degradation of TCEP can be achieved in TAP system in 40 min at 60 °C. SO₄^·- as the dominant oxidant for TCEP degradation was proved by quenching experiment and verified by EPR analysis. Alkaline condition exerted great inhibitory effect by affecting the constituents of oxidative radicals. It is suggested that Cl^- and H₂PO₄^- at lower dosages promoted the degradation by stimulating ·OH production and forming oxidative radicals with better selectivity. Intermediates identified by high resolution mass spectrometer was suggested less toxic than TCEP by ECOSAR program. Meanwhile, the illustrated oxidation mechanism mainly involved radical attack at CCl bond and cleavage of CO bond, as further confirmed by frontier electron density calculation and wavefunction analysis. Moreover, cyclic degradation of TCEP indicated the constant release of SO₄^·- in 450 min, suggesting high efficiency and stability of PDS in TAP system. Four selected OPEs achieved complete removal in TAP system and their degradation discrepancy was further discussed based on the distinctive structures. Altogether, TAP technology can be used as an efficient method in TCEP removal with great potential for application.

When bimetallic oxides and their complexes meet Fenton-like process

The heterogeneous Fenton-like reaction is an advanced oxidation process, which is widely recognized for its efficient removal of recalcitrant organic contaminants. In recent years, the construction of efficient and reusable heterogeneous Fenton-like catalysts has been extensively investigated. Recently, the use of bimetallic oxides and their complexes as catalysts for Fenton-like reaction has attracted intense attention due to their high catalytic performance and excellent stability over a wide pH range. In this article, the fundamental mechanisms of Fenton-like reactions were briefly introduced. The important reports on bimetallic oxides and their complexes are classified in detail, which are mainly divided into Fe-based and Fe-free bimetallic catalysts. We then focused in depth on the performance of their respective applications in Fenton-like reactions. Special consideration has been given to the respective contributions and synergistic mechanisms of the two metals in catalysts. Overall, it is concluded that synergistic effect of the two metals in the bimetallic catalyst can boost the utilization of hydrogen peroxide, provide adequate accessible active sites, which are all beneficial to improve catalytic performance. Finally, the current challenges in this field were proposed. Our review is expected to provide help for the application of bimetallic oxides and their complexes.

Austenitic Stainless Steel as a Catalyst Material for Photo-Fenton Degradation of Organic Dyes

In this paper, a typical austenitic stainless steel was used as a catalyst in the visible photo-Fenton degradation process of two model dyes, methylene blue and methylorange, in the presence of hydrogen peroxide and potassium persulfate as free radical-generating species. The concentration intervals for both peroxide and persulfate were in the range of 333–1667 μg/L. Very high photodecoloration efficiencies have been achieved using peroxide (>93%), while moderate ones have been achieved using persulfate (>75%) at a pH value of 6.5. For methylene blue, the maximum mineralization yield of 74.5% was achieved using 1665 μg/L of hydrogen peroxide, while methylorange was better mineralized using 999 μg/L of persulfate. The photodegradation of the dye occurred in two distinct steps, which were successfully modeled by the Langmuir–Hinshelwood pseudo-first-order kinetic model. Reaction rate constants k between 0.1 and 4.05 h−1 were observed, comparable to those presented in the reference literature at lower pH values and higher concentrations of total iron from the aqueous media.

Performance Efficiency of Conventional Treatment Plants and Constructed Wetlands towards Reduction of Antibiotic Resistance

Domestic and industrial wastewater discharges harbor rich bacterial communities, including both pathogenic and commensal organisms that are antibiotic-resistant (AR). AR pathogens pose a potential threat to human and animal health. In wastewater treatment plants (WWTP), bacteria encounter environments suitable for horizontal gene transfer, providing an opportunity for bacterial cells to acquire new antibiotic-resistant genes. With many entry points to environmental components, especially water and soil, WWTPs are considered a critical control point for antibiotic resistance. The primary and secondary units of conventional WWTPs are not designed for the reduction of resistant microbes. Constructed wetlands (CWs) are viable wastewater treatment options with the potential for mitigating AR bacteria, their genes, pathogens, and general pollutants. Encouraging performance for the removal of AR (2-4 logs) has highlighted the applicability of CW on fields. Their low cost of construction, operation and maintenance makes them well suited for applications across the globe, especially in developing and low-income countries. The present review highlights a better understanding of the performance efficiency of conventional treatment plants and CWs for the elimination/reduction of AR from wastewater. They are viable alternatives that can be used for secondary/tertiary treatment or effluent polishing in combination with WWTP or in a decentralized manner.

Phycoremediation integrated approach for the removal of pharmaceuticals and personal care products from wastewater - A review

Pharmaceuticals and personal care products (PPCPs) are of emerging concerns because of their large usage, persistent nature which promised their continuous disposal into the environment, as these pollutants are stable enough to pass through wastewater treatment plants causing hazardous effects on all the organisms through bioaccumulation, biomagnification, and bioconcentration. The available technologies are not capable of eliminating all the PPCPs along with their degraded products but phycoremediation has the advantage over these technologies by biodegrading the pollutants without developing resistant genes. Even though phycoremediation has many advantages, industries have found difficulty in adapting this technology as a single-stage treatment process. To overcome these drawbacks recent research studies have focused on developing technology that integrated phycoremediation with the commonly employed treatment processes that are in operation for treating the PPCPs effectively. This review paper focuses on such research approaches that focused on integrating phycoremediation with other technologies such as activated sludge process (ASP), advanced oxidation process (AOP), Up-flow anaerobic sludge blanket reactor (UASBR), UV irradiation, and constructed wetland (CW) with the advantages and limitations of each integration processes. Furthermore, augmenting phycoremediation by co-metabolic mechanism with the addition of sodium chloride, sodium acetate, and glucose for the removal of PPCPs has been highlighted in this review paper.

Photocatalytic degradation of acetaminophen in water via ultraviolet light and titanium dioxide thin films part II: chemical and kinetic aspects

Among the large family of emergent pharmaceutical contaminants, we find acetaminophen (ACE) that critically needs to be removed from wastewater. Advanced Oxidation Process (AOP) have proven effective in the degradation of large molecular contaminants from water. To the best of our knowledge this is the first study reported on the degradation of ACE based on immobilized TiO2 thin films. In an effort to increase the understanding of the efficiency of the degradation process, an in-depth investigation of the effects of the structure, i.e., coating layers and the amount of surface, i.e., number of coated slides used, is needed. Transparent, anatase-form TiO2 thin films were prepared via the sol-gel method (Rawal, S., S. Buer, J. R. Sanders, and P. E. Arce. 2021. “Photocatalytic Degradation of Acetaminophen from Water Solutions Via Thin Films. Part I: Synthesis and Characterization of TiO2 Thin Films.” International Journal of Reactor Engineering [Accepted]) and deposited onto glass microscope slides using a novel spraying technique, with coatings ranging from one to 10 layers. This contribution summarizes the effect of several key factors including initial concentration of the ACE, the number of coating layers (6, 8, and 10) on the glass slides and the number (4 and 6) of slides on the degradation levels for three selected media, e.g., acid, neutral and base. Comparisons studies, supported by statistical analysis between two different sets (4 and 6) of slides with discussion of potential physical-chemical reasons behind the behaviors are reported. Finally, global, first order kinetic rate constants are also reported for the different conditions used in the investigation. Although further research would be needed, in general the results are promising for the potential degradation of ACE in continuous flow systems by using immobilized TiO2 on surfaces as thin films.

Treatment technologies to mitigate the harmful effects of recalcitrant fluoroquinolone antibiotics on the environ- ment and human health

Antibiotic proliferation in the environment and their persistent nature is an issue of global concern as they induce antibiotic resistance threatening both human health and the ecosystem. Antibiotics have therefore been categorized as emerging pollutants. Fluoroquinolone (FQs) antibiotics are an emerging class of contaminants that are used extensively in human and veterinary medicine. The recalcitrant nature of fluoroquinolones has led to their presence in wastewater, effluents and water bodies. Even at a low concentration, FQs can stimulate antibacterial resistance. The main sources of FQ contamination include waste from pharmaceutical manufacturing industries, hospitals and households that ultimately reaches the wastewater treatment plants (WWTPs). The conventional WWTPs are unable to completely remove FQs due to their chemical stability. Therefore, the development and implementation of more efficient, economical, convenient treatment and removal technologies are needed to adequately address the issue. This review provides an overview of the technologies available for the removal of fluoroquinolone antibiotics from wastewater including adsorptive removal, advanced oxidation processes, removal using non-carbon based nanomaterials, microbial degradation and enzymatic degradation. Each treatment technology is discussed on its merits and limitations and a comparative view is presented on the choice of an advanced treatment process for future studies and implementation. A discussion on the commercialization potential and eco-friendliness of each technology is also included in the review. The importance of metabolite identification and their residual toxicity determination has been emphasized. The last section of the review provides an overview of the policy interventions and regulatory frameworks that aid in retrofitting antibiotics as a central key focus contaminant and thereby defining the discharge limits for antibiotics and establishing safe manufacturing practices.

Application of solar photo-Fenton in raceway pond reactors: A review

This work critically reviews the present knowledge about the use of Raceway Pond Reactors (RPR) to treat municipal wastewater treatment plant (MWWTP) secondary effluents by solar photo-Fenton process. The possibility of using RPR to treat industrial wastewater, which has been barely explored, is also reviewed. Initially, the general concepts and operation principles of RPR are described as well as their origin for photo-Fenton applications. Then, the main results and advances related to contaminants of emerging concern (CECs) removal, inactivation of microorganisms, industrial wastewater treatment and kinetic modelling are presented. Key aspects such as the impact of liquid depth, the continuous flow operation feasibility, the increase in treatment capacity, and the kinetic modelling are addressed along the review. At the end, main challenges and research gaps are identified, which should be the focuses of future research.

Photocatalyst production from wasted sediment and quality improvement with titanium dioxide to remove cephalexin in the presence of hydrogen peroxide and ultrasonic waves: A cost-effective technique

In this study, wasted sediment (sludge waste from shipping docks) was coupled with titanium isopropoxide by the thermal and sol-gel method as a new photocatalyst. The sediment-titanate catalyst alongside ultrasonic and UV was activated hydrogen peroxide to produce OH radicals and decompose cephalexin (CEP). The photocatalyst was crystalline with 52.29 m²/g BET area. The best destruction rate of 87.01% based on COD test was achieved at optimal conditions (pH: 8, cephalexin concentration: 100 mg/L, H₂O₂: 1.63 mg/L, UV: 15 W/m², ultrasonication time: 100 min at 40 kHz, photocatalyst quantity: 1.5 g/L). The trend of anions effect was NO₃^- ≤ SO₄^2- ≤ Cl^-. Decomposition of cephalexin in water solution followed the first-order kinetics (k > 0.01 min^-1, R² > 0.9). The percentage of cephalexin removal from urban water (76%) and hospital wastewater (63%) has decreased compared to the distilled water solution (87%), which is probably due to the presence of radical inhibitors. The consumed electrical energy of the studied system was calculated by 0.031 kW/h. The developed system is a promising and economical method to remove cephalexin.

Photo-mediated and advanced oxidative processes applied for the treatment of effluents with drugs used for the treatment of early COVID-19: Review

The COVID-19 pandemic is proving to be one of the most challenging health and social crises ever faced by humanity. Several drugs have been proposed as potential antiviral agents for the treatment of COVID-19 since the beginning of the health crisis. Among them are chloroquine (CQ), hydroxychloroquine (HCQ), ivermectin (IVM), and the combination of QC or HCQ and azithromycin (AZI). The use of these and several other drugs has grown sharply, even if there is proof of ineffectiveness in the early treatment or mild cases of COVID-19. Thus, there is great concern about the potential environmental impacts of the effluents released with the presence of these drugs. Therefore, this work aimed to carry out a literature review on wastewater treatment processes, focusing on removing these substances through advanced oxidation process. As the conventional effluent treatment processes do not have high efficiency for removal, it was concentrated in the literature that had as scope advanced and photo-mediated techniques to remove CQ, HCQ, IVM, and AZI. It is expected, with this work, to highlight the importance of conducting research that contributes to the control of pollution and contamination.

A Review on Occurrence and Spread of Antibiotic Resistance in Wastewaters and in Wastewater Treatment Plants: Mechanisms and Perspectives

This paper reviews current knowledge on sources, spread and removal mechanisms of antibiotic resistance genes (ARGs) in microbial communities of wastewaters, treatment plants and downstream recipients. Antibiotic is the most important tool to cure bacterial infections in humans and animals. The over- and misuse of antibiotics have played a major role in the development, spread, and prevalence of antibiotic resistance (AR) in the microbiomes of humans and animals, and microbial ecosystems worldwide. AR can be transferred and spread amongst bacteria via intra- and interspecies horizontal gene transfer (HGT). Wastewater treatment plants (WWTPs) receive wastewater containing an enormous variety of pollutants, including antibiotics, and chemicals from different sources. They contain large and diverse communities of microorganisms and provide a favorable environment for the spread and reproduction of AR. Existing WWTPs are not designed to remove micropollutants, antibiotic resistant bacteria (ARB) and ARGs, which therefore remain present in the effluent. Studies have shown that raw and treated wastewaters carry a higher amount of ARB in comparison to surface water, and such reports have led to further studies on more advanced treatment processes. This review summarizes what is known about AR removal efficiencies of different wastewater treatment methods, and it shows the variations among different methods. Results vary, but the trend is that conventional activated sludge treatment, with aerobic and/or anaerobic reactors alone or in series, followed by advanced post treatment methods like UV, ozonation, and oxidation removes considerably more ARGs and ARB than activated sludge treatment alone. In addition to AR levels in treated wastewater, it examines AR levels in biosolids, settled by-product from wastewater treatment, and discusses AR removal efficiency of different biosolids treatment procedures. Finally, it puts forward key-points and suggestions for dealing with and preventing further increase of AR in WWTPs and other aquatic environments, together with a discussion on the use of mathematical models to quantify and simulate the spread of ARGs in WWTPs. Mathematical models already play a role in the analysis and development of WWTPs, but they do not consider AR and challenges remain before models can be used to reliably study the dynamics and reduction of AR in such systems.

Titanium Dioxide-Based Photocatalysts for Degradation of Emerging Contaminants including Pharmaceutical Pollutants

Contamination of the environment has been a growing problem in recent years. Due to the rapid growth in human population, the expansion of cities, along with the development of industry, more and more dangerous chemicals end up in the environment, especially in soil and water. For the most part, it is not possible to effectively remove chemicals through traditional remediation techniques, because those used in treatment plants are not specifically designed for this purpose. Therefore, new approaches for water remediation are in great demand. Many efforts have been focused on applications of photocatalysis for the remediation of chemical pollutants including drugs. Titanium(IV) oxide nanoparticles have particularly been considered as potential photocatalysts due to their favorable properties. In this article, we present the problem of emerging contaminants including drugs and discuss the use of photocatalysts based on titanium(IV) oxide nanoparticles for their degradation. A wide selection of materials, starting from bare TiO2, via its hybrid and composite materials, are discussed including those based on carbonaceous materials or connections with macrocyclic structures. Examples of photodegradation experiments on TiO2-based materials including those performed with various active pharmaceutical ingredients are also included.

Degradation of pharmaceutical drug paracetamol via UV irradiation using Fe-TiO2 composite photocatalyst: statistical analysis and parametric optimization

In the present investigation, a novel Fe-TiO₂ composite was fabricated by mixing fly ash (FA), foundry sand (FS), and bentonite clay for the degradation of paracetamol (PCM). This composite acts as a surface for immobilizing the TiO₂ catalyst (using the dip-coating method) besides facilitating the leaching of iron (FA and FS) in acidic conditions. Leached iron (in the form of Fe(II), Fe(III), and total iron) promotes the photo-Fenton (with the addition of H₂O₂ in the system) while the surface-active TiO₂ layer leads to photocatalysis, thus leading to in situ dual process combining photocatalysis and photo-Fenton in one system. This dual process led to a synergy of 75% in comparison to the photocatalysis and photo-Fenton process owing to the large production of •OH. Various parameters such as H₂O₂ dose (525 mg l^-1), number of beads (80), degradation time (215 min), and volume (200 ml) were optimized, and 96.6% of reduction in PCM was observed. Durability study of catalyst showed a minor reduction in the activity of the catalyst after 30 cycles. The TiO₂ catalyst was still intact as a film, and iron leaching was also occurring from the beads even after recycling, thus confirming their long-term durability in terms of dual effect. The stability and durability of the composite were confirmed by characteristic analysis such as SEM/EDS. Mineralization of PCM was concluded through the estimation of degradation by-products using GC-MS analysis followed by estimation of nitrate and nitrite ions.

Efficiency and mechanism of 2,4-dichlorophenol degradation by the UV/IO4- process

This study explores the efficiency and kinetics of the photoactivated periodate process for the degradation of 2,4-dichlorophenol (2,4-DCP) in water. The obtained results show that the degradation rate was considerably higher for UV/IO₄^- compared to UV irradiation alone. Pseudo first-order reaction rate kinetics were obtained for all process conditions. The pH did not have a significant impact on the decomposition of 2,4-DCP using photoactivated periodate. Therefore, the applied method can be used to treat (waste)water at various pH. By raising the initial concentration of periodate to 5 mM, the degradation rate increased, while it decreased again at a concentration of 8 mM. As the 2,4-DCP concentration increased, the removal rate decreased. The extent of degradation was observed to be proportional with the UV intensity. A mechanistic study revealed that iodine radicals dominated the degradation of 2,4-DCP by photoactivated periodate, whereas OH and O(³P) only played a minor role. At pH 5.0, all chlorine atoms in 2,4-DCP were released as chloride ions in the UV/IO₄^- process, hence reaching a total dechlorination. Finally, the presence of inorganic salts, even at high levels, did not significantly impact the degradation. According to the results achieved in this study, the UV/IO₄^- system can be considered as a valuable alternative to treat effluents containing chlorinated organic compounds such as pulp and paper mill effluents and brine (waste)water.

Rapid degradation of norfloxacin by VUV/Fe2+/H2O2 over a wide initial pH: Process parameters, synergistic mechanism, and influencing factors

Vacuum UV (VUV) technology has attracted much attention because it effectively splits water to generate reactive oxygen species (ROS) in situ and has the advantages of UV. So far, the synergistic mechanisms, formation pathways and contributions of ROS in VUV/Fe²⁺/H₂O₂ process have not been extensively studied. Herein, complete removal (at 4 min) and 63.3% mineralization (at 8 min) of 45 μM norfloxacin (NOR) were achieved at neutral pH by VUV/Fe²⁺/H₂O₂ (90 μM Fe²⁺ and 3 mM H₂O₂). Compared with its subsystems, VUV/Fe²⁺/H₂O₂ can not only increase the pseudo-first-order reaction rate constant of NOR removal by 2.3-14.9 times and increase the mineralization by 20.4-59.4%, but also reduce the residual ratio of H₂O₂ by 19.9-70.1% and reduce total cost by 20.0-68.0%. The synergy factor of VUV/Fe²⁺/H₂O₂ was 3.97, which was attributed to the VUV irradiation promoting iron redox cycle and H₂O₂ decomposition. Moreover, hydroxyl radical and superoxide radical, which were identified as the main ROS, contributed 79.07% and 18.47% to NOR removal, respectively. Degradation pathways of NOR were proposed. Furthermore, effects of coexisting ions and dissolved organic matter were investigated. As an energy-saving and efficient process, the satisfactory results of VUV/Fe²⁺/H₂O₂ applied in real waters also highlight its application potential.

Effectiveness of Advanced Oxidation Processes in Wastewater Treatment: State of the Art

In recent years, many scientific studies have focused their efforts on quantifying the different types of pollutants that are not removed in wastewater treatment plants. Compounds of emerging concern (CECs) have been detected in different natural environments. The presence of these compounds in wastewater is not new, but they may have consequences in the future. These compounds reach the natural environment through various routes, such as wastewater. This review focuses on the study of tertiary treatment with advanced oxidation processes (AOPs) for the degradation of CECs. The main objective of the different existing AOPs applied to the treatment of wastewater is the degradation of pollutants that are not eliminated by means of traditional wastewater treatment.

Toxicity of acrylamide after degradation by conjugated (UV/H2O2) photolysis in microalgae

Acrylamide (AA) is routinely used in laboratories and industries, and its disposal is always a problem; consequently, offering an alternative for their treatment contributes to conducting research in a responsible way. Therefore, in this work, acrylamide solutions were degraded by ultraviolet radiation and hydrogen peroxide (H₂O₂), and their toxicity was evaluated using a Desmodesmus quadricauda microalgae growth assay. The AA solutions were exposed to different dosages of H₂O₂ and different exposure times to UV radiation. The degradation was evaluated by liquid chromatography, which allowed the identification of the acrylamide peak and subsequent by-product peaks. A 100% degradation of the 1.5 mg L^-1 AA solution with UV/H₂O₂ (0.034 g L^-1) was achieved in just 10 min. The by-products formed did not inhibit the growth of D. quadricauda microalgae. The number of D. quadricauda individuals that grew in acrylamide solutions exposed to 20 and 30 min of UV radiation, with 0.034 g L^-1 of H₂O₂, was very similar to the number of individuals that grew in the control solution. Thus, the treatment proposed in this work using H₂O₂ combined with ultraviolet radiation degraded acrylamide into by-products with reduced toxicity.

Microplastic particles in the aquatic environment: A systematic review

Microplastics (MPs) pollution has become one of the most severe environmental concerns today. MPs persist in the environment and cause adverse effects in organisms. This review aims to present a state-of-the-art overview of MPs in the aquatic environment. Personal care products, synthetic clothing, air-blasting facilities and drilling fluids from gas-oil industries, raw plastic powders from plastic manufacturing industries, waste plastic products and wastewater treatment plants act as the major sources of MPs. For MPs analysis, pyrolysis-gas chromatography-mass spectrometry (Py-GC-MS), Py-MS methods, Raman spectroscopy, and FT-IR spectroscopy are regarded as the most promising methods for MPs identification and quantification. Due to the large surface area to volume ratio, crystallinity, hydrophobicity and functional groups, MPs can interact with various contaminants such as heavy metals, antibiotics and persistent organic contaminants. Among different physical and biological treatment technologies, the MPs removal performance decreases as membrane bioreactor (> 99%) > activated sludge process (~98%) > rapid sand filtration (~97.1%) > dissolved air floatation (~95%) > electrocoagulation (> 90%) > constructed wetlands (88%). Chemical treatment methods such as coagulation, magnetic separations, Fenton, photo-Fenton and photocatalytic degradation also show moderate to high efficiency of MP removal. Hybrid treatment technologies show the highest removal efficacies of MPs. Finally, future research directions for MPs are elaborated.

Ibuprofen degradation and energy generation in a microbial fuel cell using a bioanode fabricated from devil fish bone char

Ibuprofen degradation and energy generation in a single-chamber Microbial Fuel Cell (MFC) were evaluated using a bioanode fabricated from devil fish bone char (BCA) synthesized by calcination in air atmosphere. Its performance was compared with conventional carbon felt (CF). Bone char textural properties were determined by nitrogen adsorption. Before and after, the bacterial colonization on the materials was analyzed by environmental scanning electron microscopy. Energy generation was evaluated by electrochemical techniques as open-circuit potential, linear sweep voltammetry, and electrochemical impedance spectroscopy. Ibuprofen degradation was analyzed by High-Performance Liquid Chromatography-Ultraviolet, and the chemical oxygen demand (COD) removal was measured. Results showed a specific area of 136 m²/g for BCA, having enough space to immobilize microorganisms. The micrographs confirmed the biofilm formation on the electrode materials. Over the 14 days, MFC with BCA reached a maximum power density of 4.26 mW/m², 175% higher than CF, and an electron transfer resistance 2.1 times lower than it. This coincides with the COD removal and ibuprofen degradation efficiencies, which were 43.6% and 34% for BCA and 31.8% and 27% for CF. Hence, these findings confirmed that BCA in MFC could provide an alternative electrode material for ibuprofen degradation and energy generation.

Electro-oxidation of tetracycline in methanol media on DSA®-Cl2

The electro-oxidation of tetracycline (TeC) in methanol medium containing chloride or sulfate ions was evaluated using a DSA®-Cl₂ in a flow reactor and compared with BDD. The results show that after 30 min of electrolysis no TeC is detected by liquid chromatography when chloride is used as supporting electrolyte. On the other hand, after 90 min of electrolysis using a BDD anode only 61% of TeC was removed from solutions with chloride, but in the presence of sulfate the removal reaches 94%. This evidences that the oxidizing species generated during electrochemical oxidation control the process and the mechanism of degradation of the TeC. Besides that, it was possible to infer that only a small amount of methanol might convert to formaldehyde or formic acid, although they were not detected according to the nil changes in the FTIR spectra or in the HPLC chromatograms recorded.

Antibiotics in wastewater: From its occurrence to the biological removal by environmentally conscious technologies

In this critical review, we explored the most recent advances about the fate of antibiotics on biological wastewater treatment plants (WWTP). Although the occurrence of these pollutants in wastewater and natural streams has been investigated previously, some recent publications still expose the need to improve the detection strategies and the lack of information about their transformation products. The role of the antibiotic properties and the process operating conditions were also analyzed. The pieces of evidence in the literature associate several molecular properties to the antibiotic removal pathway, like hydrophobicity, chemical structure, and electrostatic interactions. Nonetheless, the influence of operating conditions is still unclear, and solid retention time stands out as a key factor. Additionally, the efficiencies and pathways of antibiotic removals on conventional (activated sludge, membrane bioreactor, anaerobic digestion, and nitrogen removal) and emerging bioprocesses (bioelectrochemical systems, fungi, and enzymes) were assessed, and our concern about potential research gaps was raised. The combination of different bioprocess can efficiently mitigate the impacts generated by these pollutants. Thus, to plan and design a process to remove and mineralize antibiotics from wastewater, all aspects must be addressed, the pollutant and process characteristics and how it is the best way to operate it to reduce the impact of antibiotics in the environment.

Kinetic Modeling for Photo-Assisted Penicillin G Degradation of (Mn0.5Zn0.5)[CdxFe2-x]O4 (x ≤ 0.05) Nanospinel Ferrites

Penicillin G is an old and widely used antibiotic. Its persistence in the environment started to appear in many environmental samples and food chains. The removal of these emerging pollutants has been a challenging task for scientists in the last decades. The photocatalytic properties of Cd²⁺ doped Manganese- Zinc NSFs with chemical formula (Mn_0.5Zn_0.5)[Cd_xFe_2−x]O₄ (0.0 ≤ x ≤ 0.05) NSFs are herein evaluated. The Manganese- Zinc N.S.F.s nanomaterials were deeply characterized, utilizing UV-Vis (reflectance) spectroscopy, X-ray diffraction, N₂ adsorption isotherm measurements, and S.E.M., SEM-EDX mapping, and T.E.M. The Kinetic model for the photodegradation of penicillin G (as a model molecule) is investigated using visible light as a source of energy. The kinetic study shows that our results fit well with the modified pseudo-first-order model. The Pen G degradation are 88.73%, 66.65%, 44.70%, 37.62% and 24.68% for x = 0.5, 0.4, 0.3, 0.2 and 0.1, respectively, against 14.68% for the free Cd spinel sample. The pseudo-rate constant is bandgap dependent. From the intra-diffusion rate constant (K_d), we developed an intra-diffusion time (τ) model, which decreases exponentially as a function of (x) and mainly shows the existence of three different domains versus cadmium coordination in spinel ferrite samples. Hence, Cadmium’s presence generates spontaneous polarization with a strong opportunity to monitor the charge separation and then open the route to a new generation of “assisted” photocatalysts under visible light.

Coagulation-flocculation followed by catalytic ozonation processes for enhanced primary treatment during wet weather conditions

Combined sewer overflows (CSO), generated during the wet weather flow from the combination of the inflow and stormwater runoff in sewer system, result in an overflow of untreated wastewater from sewer system, which might ultimately contain different micropollutants (MPs). In this study, a coagulation-flocculation-sedimentation (CFS) pretreated CSO spiked with MPs was treated by catalytic ozonation using carbon, iron, and peroxide-based catalysts. The catalysts were characterized and their activity on MPs removal was studied at two different ozone (O₃) doses (5 and 10 mg L^-1). The effect of the treatment on the spiked CSO effluent was also assessed from the acute toxicity of the effluent using Microtox®, Yeast, and Macrophage cell-line toxicity assay tests. All the carbon-based catalysts showed large surface area, which was strongly influenced by the activation technique in the preparation of the catalysts. The CFS treatment strongly reduced the turbidity (≥60%) but had marginal effect on the UV₂₅₄, dissolved organic carbon (DOC), and pH. Sludge Based Carbon (SBC) showed strong adsorption capacity (≥60% removal efficiency) for all MPs studied compared to other carbon and iron-based catalysts. Ozonation alone was effective for the degradation of easily oxidizable MPs (sulfamethoxazole, mecoprop, and 2,4-dichlorophenoxyl acetic acid), achieving more than 80% degradation efficiency at 10 mg L^-1 of ozone, but not effective for atrazine (≤60% degradation efficiency) at similar O₃ dose. Catalytic ozonation (at 10 mg L^-1 O₃ dose) improved the degradation of the MPs at low catalyst dosage but higher dosage strongly inhibited their degradation. In all cases, the effluents showed negligible acute toxicity, indicating the suitability of the process for the treatment of CSO.

Fenton-based technologies as efficient advanced oxidation processes for microcystin-LR degradation

In recent years, the safety and ecology threat of cyanobacterial burst has drawn wide concern, especially the release of toxic microcystin-LR (MC-LR). To break through the bottleneck of uncomplete MC-LR degradation by conventional physical-chemistry methods, Fenton-based advanced oxidation processes (AOPs) developed rapidly due to striking degradation efficiency through the potent hydroxyl radicals (HO·) oxidation. Herein, a comprehensive overview is presented on the recent achievements of the various Fenton-based technologies (including conventional Fenton, photo-Fenton, electro-Fenton, ozone-Fenton and sono-Fenton) for MC-LR degradation. In particular, the comparisons between various Fenton-based technologies about advantages and drawbacks are discussed. Based on analyzing the degradation intermediates and pathways, the destruction of Adda chain via hydroxylation was confirmed to be essential for detoxification of MC-LR. Roles of influencing factors such as MC-LR initial concentration, dosages of the catalyst and oxidant, environment alkalinity, natural organic matters (NOMs) as well as other inorganic ions are specifically summarized. This Review also gave special emphasis on technique optimization trends for Fenton application of MC-LR degradation, as well as key challenges and future opportunities in this fast developing field.

Removal of Diclofenac in Wastewater Using Biosorption and Advanced Oxidation Techniques: Comparative Results

Wastewater treatment is a topic of primary interest with regard to the environment. Diclofenac is a common analgesic drug often detected in wastewater and surface water. In this paper, three commonly available agrifood waste types (artichoke agrowaste, olive-mill residues, and citrus waste) were reused as sorbents of diclofenac present in aqueous effluents. Citrus-waste biomass for a dose of 2 g·L−1 allowed for removing 99.7% of diclofenac present in the initial sample, with a sorption capacity of 9 mg of adsorbed diclofenac for each gram of used biomass. The respective values obtained for olive-mill residues and artichoke agrowaste were around 4.15 mg·g−1. Advanced oxidation processes with UV/H2O2 and UV/HOCl were shown to be effective treatments for the elimination of diclofenac. A significant reduction in chemical oxygen demand (COD; 40–48%) was also achieved with these oxidation treatments. Despite the lesser effectiveness of the sorption process, it should be considered that the reuse and valorization of these lignocellulosic agrifood residues would facilitate the fostering of a circular economy.