Bicarbonate-activated persulfate oxidation of acetaminophen

Exploring the viability of peracetic acid-mediated antibiotic degradation in wastewater through activation with electrogenerated HClO

Electrochemical advanced oxidation processes (EAOPs) face challenging conditions in chloride media, owing to the co-generation of undesirable Cl-disinfection byproducts (Cl-DBPs). Herein, the synergistic activation between in-situ electrogenerated HClO and peracetic acid (PAA)-based reactive species in actual wastewater is discussed. A metal-free graphene-modified graphite felt (graphene/GF) cathode is used for the first time to achieve the electrochemically-mediated activation of PAA. The PAA/Cl- system allowed a near-complete sulfamethoxazole (SMX) degradation (kobs =0.49 min-1) in only 5 min in a model solution, inducing 32.7- and 8.2-fold rise in kobs as compared to single PAA and Cl- systems, respectively. Such enhancement is attributed to the occurrence of 1O2 (25.5 μmol L-1 after 5 min of electrolysis) from the thermodynamically favored reaction between HClO and PAA-based reactive species. The antibiotic degradation in a complex water matrix was further considered. The SMX removal is slightly susceptible to the coexisting natural organic matter, with both the acute cytotoxicity (ACT) and the yield of 12 DBPs decreasing by 29.4 % and 37.3 %, respectively. According to calculations, HClO accumulation and organic Cl-addition reactions are thermodynamically unfavored. This study provides a scenario-oriented paradigm for PAA-based electrochemical treatment technology, being particularly appealing for treating wastewater rich in Cl- ion, which may derive in toxic Cl-DBPs.

Constructing High-Performance Cobalt-Based Environmental Catalysts from Spent Lithium-Ion Batteries: Unveiling Overlooked Roles of Copper and Aluminum from Current Collectors

Converting spent lithium-ion batteries (LIBs) cathode materials into environmental catalysts has drawn more and more attention. Herein, we fabricated a Co3O4-based catalyst from spent LiCoO2 LIBs (Co3O4-LIBs) and found that the role of Al and Cu from current collectors on its performance is nonnegligible. The density functional theory calculations confirmed that the doping of Al and/or Cu upshifts the d-band center of Co. A Fenton-like reaction based on peroxymonosulfate (PMS) activation was adopted to evaluate its activity. Interestingly, Al doping strengthened chemisorption for PMS (from -2.615 eV to -2.623 eV) and shortened Co-O bond length (from 2.540 Å to 2.344 Å) between them, whereas Cu doping reduced interfacial charge-transfer resistance (from 28.347 kΩ to 6.689 kΩ) excepting for the enhancement of the above characteristics. As expected, the degradation activity toward bisphenol A of Co3O4-LIBs (0.523 min-1) was superior to that of Co3O4 prepared from commercial CoC2O4 (0.287 min-1). Simultaneously, the reasons for improved activity were further verified by comparing activity with catalysts doped Al and/or Cu into Co3O4. This work reveals the role of elements from current collectors on the performance of functional materials from spent LIBs, which is beneficial to the sustainable utilization of spent LIBs.

Enhanced Degradation of Micropollutants in a Peracetic Acid/Mn(II) System with EDDS: An Investigation of the Role of Mn Species

Extensive research has been conducted on the utilization of a metal-based catalyst to activate peracetic acid (PAA) for the degradation of micropollutants (MPs) in water. Mn(II) is a commonly employed catalyst for homogeneous advanced oxidation processes (AOPs), but its catalytic performance with PAA is poor. This study showed that the environmentally friendly chelator ethylenediamine-N,N'-disuccinic acid (EDDS) could greatly facilitate the activation of Mn(II) in PAA for complete atrazine (ATZ) degradation. In this process, the EDDS enhanced the catalytic activity of manganese (Mn) and prevented disproportionation of transient Mn species, thus facilitating the decay of PAA and mineralization of ATZ. By employing electron spin resonance detection, quenching and probe tests, and 18O isotope-tracing experiments, the significance of high-valent Mn-oxo species (Mn(V)) in the Mn(II)-EDDS/PAA system was revealed. In particular, the involvement of the Mn(III) species was essential for the formation of Mn(V). Mn(III) species, along with singlet oxygen (1O2) and acetyl(per)oxyl radicals (CH3C(O)O•/CH3C(O)OO•), also contributed partially to ATZ degradation. Mass spectrometry and density functional theory methods were used to study the transformation pathway and mechanism of ATZ. The toxicity assessment of the oxidative products indicated that the toxicity of ATZ decreased after the degradation reaction. Moreover, the system exhibited excellent interference resistance toward various anions and humid acid (HA), and it could selectively degrade multiple MPs.

Were Persulfate-Based Advanced Oxidation Processes Really Understood? Basic Concepts, Cognitive Biases, and Experimental Details

Persulfate (PS)-based advanced oxidation processes (AOPs) for pollutant removal have attracted extensive interest, but some controversies about the identification of reactive species were usually observed. This critical review aims to comprehensively introduce basic concepts and rectify cognitive biases and appeals to pay more attention to experimental details in PS-AOPs, so as to accurately explore reaction mechanisms. The review scientifically summarizes the character, generation, and identification of different reactive species. It then highlights the complexities about the analysis of electron paramagnetic resonance, the uncertainties about the use of probes and scavengers, and the necessities about the determination of scavenger concentration. The importance of the choice of buffer solution, operating mode, terminator, and filter membrane is also emphasized. Finally, we discuss current challenges and future perspectives to alleviate the misinterpretations toward reactive species and reaction mechanisms in PS-AOPs.

Sulfur Vacancies in Pyrite Trigger the Path to Nonradical Singlet Oxygen and Spontaneous Sulfamethoxazole Degradation: Unveiling the Hidden Potential in Sediments

Pharmaceutical residues in sediments are concerning as ubiquitous emerging contaminants. Pyrite is the most abundant sulfide minerals in the estuarine and coastal sediments, making it a major sink for pharmaceutical pollutants such as sulfamethoxazole (SMX). However, research on the adsorption and redox behaviors of SMX on the pyrite surface is limited. Here, we investigated the impact of the nonphotochemical process of pyrite on the fate of coexisting SMX. Remarkably, sulfur vacancies (SVs) on pyrite promoted the generation of nonradical species (hydrogen peroxide, H2O2 and singlet oxygen, 1O2), thereby exhibiting prominent SMX degradation performance under darkness. Nonradical 1O2 contributed approximately 73.1% of the total SMX degradation. The SVs with high surrounding electron density showed an advanced affinity for adsorbing O2 and then initiated redox reactions in the sediment electron-storing geobattery pyrite, resulting in the extensive generation of H2O2 through a two-electron oxygen reduction pathway. Surface Fe(III) (hydro)oxides on pyrite facilitated the decomposition of H2O2 to 1O2 generation. Distinct nonradical products were observed in all investigated estuarine and coastal samples with the concentrations of H2O2 ranging from 1.96 to 2.94 μM, while the concentrations of 1O2 ranged from 4.63 × 10-15 to 8.93 × 10-15 M. This dark-redox pathway outperformed traditional photochemical routes for pollutant degradation, broadening the possibilities for nonradical species use in estuarine and coastal sediments. Our study highlighted the SV-triggered process as a ubiquitous yet previously overlooked source of nonradical species, which offered fresh insights into geochemical processes and the dynamics of pollutants in regions of frequent redox oscillations and sulfur-rich sediments.

2D Ni-Co bimetallic oxide nanosheets activate persulfate for targeted conversion of bisphenol A in wastewater into polymers

The selective removal of targeted pollutants from complex wastewater is challenging. Herein, a novel persulfate (PS)-based advanced oxidation system equipped with a series of two-dimensional (2D) bimetallic oxide nanosheets (NSs) catalysts is developed to selectively degrade bisphenol A (BPA) within mixed pollutants via initiating nonradical-induced polymerization. Results indicate that the Ni0.60Co0.40Ox NSs demonstrate the highest catalytic efficiency among all Ni-Co NSs catalysts. Specifically, BPA degradation rate is 47.34, 27.26, and 9.72 times higher than that of 4-chlorophenol, phenol, and 2,4-dichlorophenol in the mixed solution, respectively. The lower oxidative potential of BPA in relation to the other pollutants renders it the primary target for oxidation within the PDS activation system. PDS molecules combine on the surface of Ni0.60Co0.40Ox NSs to form the surface-activated complex, triggering the generation of BPA monomer radicals through H-abstraction or electron transfer. These radicals subsequently polymerize on the surface of the catalyst through coupling reactions. Importantly, this polymerization process can occur under typical aquatic environmental conditions and demonstrates resistance to background matrices like Cl- and humic acid due to its inherent nonradical attributes. This study offers valuable insights into the targeted conversion of organic pollutants in wastewater into value-added polymers, contributing to carbon recycle and circular economy.

Mechanistic investigation of the electricity and gallic acid synergistically accelerated Fe(III)/Fe(II) cycle for the degradation of carbamazepine

This study investigated the application of a natural plant polyphenol, gallic acid (GA) to form complex with iron to promote the redox cycle of Fe(III)/Fe(II) under neutral initial pH conditions in the electrochemical (EC) system for activation of peroxymonosulfate (PMS) to efficiently degrade carbamazepine (CBZ). Results demonstrated that the synergistic effects of GA and EC significantly improved the removal efficiency, and the EC/GA/Fe(III)/PMS system effectively removed 100% of CBZ within a wide initial pH range of 3.0-7.0. The optimum stoichiometric ratio of GA to Fe(III) was found as 2:1. Investigations including quenching experiment, chemical probe analysis, and electron paramagnetic resonance (EPR) analysis were conducted to identify the primary reaction radicals as •OH, SO4•-, along with the 1O2 and Fe(IV). In the EC/GA/Fe(III)/PMS system, the synergistic effect of GA and electrochemistry led to a remarkable enhancement in the generation of •OH. Furthermore, the complexation reduction mechanism of GA and Fe(III) was proposed based on experimental and instrumental analyses, which demonstrated that the semi-quinone products of GA were the main substances promoting the Fe(III)/Fe(II) cycle. Mass spectrometry results showed that CBZ generated 27 byproducts during degradation, with formic acid as the main product of GA. The degradation efficiency of the EC/GA/Fe(III)/PMS system remained stable and excellent, exhibiting remarkable performance in the presence of various inorganic anions, including Cl- and NO3-, as well as naturally occurring organic compounds such as fulvic acid (FA). Overall results indicated that the EC/GA/Fe(III)/PMS system can be applied to effectively treat practical wastewater treatment without requirement of pH adjustment.

Enhanced TC degradation by persulfate activation with carbon-coated CuFe2O4: The radical and non-radical co-dominant mechanism, DFT calculations and toxicity evaluation

Facing the constraints of critical agglomeration and poor reusability of CuFe2O4 in catalytic applications, the feasibility of synthesizing a composite catalyst using carbon coating technology for efficient TC removal with enhanced PDS activity was investigated. The composite catalyst (CuFe2O4@C) can stimulate both radical (SO4•- and HO•) and non-radical (1O2) pathways to dominate the catalytic reaction for removing 95.7% of the TC in 60 min. Meanwhile, the defective structure of the external carbon layer protected the internal CuFe2O4 from excessive oxidation, allowing the CuFe2O4@C to maintain over 90% TC removal after 5 cycles with less interference from inorganic anions, demonstrating significant catalytic performance and satisfactory reusability. Finally, the DFT calculations and TEST evaluation were performed to discuss the structural properties of TC and its toxicity assessment during the whole degradation process, while three possible degradation pathways were proposed. Significantly, the carbon-coated composite catalysts of potential universal applicability for multi-pathway PDS activation offered an attractive new strategy for the effective degradation of antibiotic wastewater.

Singlet oxygen: Properties, generation, detection, and environmental applications

Singlet oxygen (1O2) is molecular oxygen in the excited state with high energy and electrophilic properties. It is widely found in nature, and its important role is gradually extending from chemical syntheses and medical techniques to environmental remediation. However, there exist ambiguities and controversies regarding detection methods, generation pathways, and reaction mechanisms which have hindered the understanding and applications of 1O2. For example, the inaccurate detection of 1O2 has led to an overestimation of its role in pollutant degradation. The difficulty in detecting multiple intermediate species obscures the mechanism of 1O2 production. The applications of 1O2 in environmental remediation have also not been comprehensively commented on. To fill these knowledge gaps, this paper systematically discussed the properties and generation of 1O2, reviewed the state-of-the-art detection methods for 1O2 and long-standing controversies in the catalytic systems. Future opportunities and challenges were also discussed regarding the applications of 1O2 in the degradation of pollutants dissolved in water and volatilized in the atmosphere, the disinfection of drinking water, the gas/solid sterilization, and the self-cleaning of filter membranes. This review is expected to provide a better understanding of 1O2-based advanced oxidation processes and practical applications in the environmental protection of 1O2.

Persulfate enhanced removal of bisphenol A by copper oxide/reduced graphene oxide foam: Influencing factors, mechanism and degradation pathway

The CuO/reduced graphene oxide foam (CuO/RGF) with excellent recyclability was prepared via hydrothermal method followed by freeze drying treatment for bisphenol A (BPA) removal via activating peroxydisulfate (PDS). SEM, XRD, XPS, FT-IR, BET, and TG techniques were used to investigate the structure and property of CuO/RGF. The effect of degradation conditions (pH, PDS amount, Cl-, HCO3-, HA and FA) on BPA removal by CuO/RGF were investigated. The result presented that CuO nanosheet was inserted into the RGF carrier with three-dimensional structure. The degradation rate constant of BPA over CuO/RGF (0.00917 min-1) was 1.24 and 6.46 times higher than those of BPA over CuO (0.00714 min-1) and RGF (0.00142 min-1). More importantly, the pore structure of RGF can successfully limit the release of Cu (II) compared to pure CuO. According to quenching test as well as electron spin resonance (EPR) spectra, BPA degradation was triggered by 1O2, •OH and SO4•-, which was the combination of nonradical (1O2) and radical activation of PDS (•OH and SO4•-). The possible degradation route of BPA was proposed based on intermediates obtained by combining solid phase extraction pretreatment technique with high performance liquid-mass spectrometry. After assessing the viability of MCF-7 cells, we can see that the estrogenic activities of treated solution reduced without producing stronger endocrine disruptors.

Activation of persulfate with natural organic acids (ascorbic acid/catechin hydrate) for naproxen degradation in water and soil: Mechanism, pathway, and toxicity assessment

In this study, we investigated the effects of different natural organic acids (NOAs), L-ascorbic acid (AA) and (+)-catechin hydrate (CAT), on the activation of persulfate (PDS) for the oxidation of naproxen (NAP) in water and soil. We found that only AA-activated PDS process had a significant degradation efficiency of NAP in water. High AA concentration (500 μM) inhibited the degradation of NAP, whereas high levels of PDS (7.5 mM) and acidic conditions (pH=3-7) were beneficial for NAP degradation. In soil, both CAT and AA promoted PDS activation and NAP degradation. Low soil organic matter and high Fe/Mn-mineral contents were favorable for NAP degradation by AA-activated PDS. Column experiments confirmed that NAP was readily transported and degraded under porous medium conditions using AA-activated PDS. Moreover, we revealed that SO4•- and HO• were the dominant reactive species for NAP degradation by AA-activated PDS. Intermediate products of NAP in the AA-activated PDS process were analyzed and the reactive sites of NAP were predicted. E. coli growth tests verified that the intermediate products in the AA-activated PDS process were less toxic than NAP. Our results highlight the high potential of NOAs-activated PDS process for the remediation of NAP-contaminated water and soil.

Generation and engineering applications of sulfate radicals in environmental remediation

Sulfate radical (SO4•-)-based advanced oxidation processes (AOPs) have become promising alternatives in environmental remediation due to the higher redox potential (2.6-3.1 V) and longer half-life period (30-40 μs) of sulfate radicals compared with many other radicals such as hydroxyl radicals (•OH). The generation and mechanisms of SO4•- and the applications of SO4•--AOPs have been examined extensively, while those using sulfite as activation precursor and their comparisons among various activation precursors have rarely reviewed comprehensively. In this article, the latest progresses in SO4•--AOPs were comprehensively reviewed and commented on. First of all, the generation of SO4•- was summarized via the two activation methods using various oxidant precursors, and the generation mechanisms were also presented, which provides a reference for guiding researchers to better select two precursors. Secondly, the reaction mechanisms of SO4•- were reviewed for organic pollutant degradation, and the reactivity was systematically compared between SO4•- and •OH. Thirdly, methods for SO4•- detection were reviewed which include quantitative and qualitative ones, over which current controversies were discussed. Fourthly, the applications of SO4•--AOPs in various environmental remediation were summarized, and the advantages, challenges, and prospects were also commented. At last, future research needs for SO4•--AOPs were also proposed consequently. This review could lead to better understanding and applications of SO4•--AOPs in environmental remediations.

Unexpectedly Enhanced Organics Removal in Persulfate Oxidation with High Concentration of Sulfate: The Origin and the Selectivity

Massive anions in high saline wastewater are primary factors that restricted the efficiency of pollutant degradation in advanced oxidation processes (AOPs). Herein, we reported the influence laws of different anions at high concentration on the electron-transfer process in the activation of persulfate, and especially, the sulfate anion exhibited the excellent promotion effect. Depending on the ionic charge, polarizability, and size, the anions exerted diverse effects on the dispersed phase and zeta potential of carbonaceous catalysts, which further embodied in the removal of pollutants. Based on the differences of reaction rate constant in water solution and high saline solution, the order was ClO4- < NO3- < Cl- < SO42- < CO32-, obeying the Hofmeister series. The enhancement of the sulfate anion was widely confirmed with different carbonaceous catalysts and pollutants with various structures. It could be attributed to the higher oxidation capacity, the faster interfacial electron transfer, and the better catalyst dispersion in the high sulfate environment. On the other hand, the decrease of zeta potential of the catalyst induced by sulfate reinforced the electrostatic attraction or repulsion with pollutants, which caused the selectivity of the sulfate promotion effect. Overall, this study provides new insights into the mechanism of influence of anions on AOPs, which refreshed the cognition of the role of sulfate on pollutant degradation, and helps guide the treatment design of high salinity wastewater.

Merits and Limitations of Radical vs. Nonradical Pathways in Persulfate-Based Advanced Oxidation Processes

Urbanization and industrialization have exerted significant adverse effects on water quality, resulting in a growing need for reliable and eco-friendly treatment technologies. Persulfate (PS)-based advanced oxidation processes (AOPs) are emerging as viable technologies to treat challenging industrial wastewaters or remediate groundwater impacted by hazardous wastes. While the generated reactive species can degrade a variety of priority organic contaminants through radical and nonradical pathways, there is a lack of systematic and in-depth comparison of these pathways for practical implementation in different treatment scenarios. Our comparative analysis of reaction rate constants for radical vs. nonradical species indicates that radical-based AOPs may achieve high removal efficiency of organic contaminants with relatively short contact time. Nonradical AOPs feature advantages with minimal water matrix interference for complex wastewater treatments. Nonradical species (e.g., singlet oxygen, high-valent metals, and surface activated PS) preferentially react with contaminants bearing electron-donating groups, allowing enhancement of degradation efficiency of known target contaminants. For byproduct formation, analytical limitations and computational chemistry applications are also considered. Finally, we propose a holistically estimated electrical energy per order of reaction (EE/O) parameter and show significantly higher energy requirements for the nonradical pathways. Overall, these critical comparisons help prioritize basic research on PS-based AOPs and inform the merits and limitations of system-specific applications.

Molecular structure-dependent contribution of reactive species to organic pollutant degradation using nanosheet Bi2Fe4O9 activated peroxymonosulfate

Iron-based catalysts have attracted increasing attention in heterogeneous activation of peroxymonosulfate (PMS). However, the activity of most iron-based heterogenous catalysts is not satisfactory for practical application and the proposed activation mechanisms of PMS by iron-based heterogenous catalyst vary case by case. This study prepared Bi₂Fe₄O₉ (BFO) nanosheet with super high activity toward PMS, which was comparable to its homogeneous counterpart at pH 3.0 and superior to its homogeneous counterpart at pH 7.0. Fe sites, lattice oxygen and oxygen vacancies on BFO surface were believed to be involved in the activation of PMS. By using electron paramagnetic resonance (EPR), radical scavenging tests, ⁵⁷Fe Mössbauer and ¹⁸O isotope-labeling technique, the generation of reactive species including sulfate radicals, hydroxyl radicals, superoxide and Fe (IV) were confirmed in BFO/PMS system. However, the contribution of reactive species to the elimination of organic pollutants very much depends on their molecular structure. The effect of water matrices on the elimination of organic pollutants also hinges on their molecular structure. This study implies that the molecular structure of organic pollutants governs their oxidation mechanism and their fate in iron-based heterogeneous Fenton-like system and further broadens our knowledge on the activation mechanism of PMS by iron-based heterogeneous catalyst.

Low-valent copper on molybdenum triggers molecular oxygen activation to selectively generate singlet oxygen for advanced oxidation processes

Singlet oxygen (¹O₂), which is difficult to generate, plays an important role in chemosynthesis, biomedicine and environment. Molecular oxygen (O₂) is a green oxidant to produce ¹O₂ cost-effectively. However, O₂ activation is difficult due to its spin-forbidden nature. Moreover, the main products of O₂ activation are basically hydrogen peroxide (H₂O₂) and hydroxyl radical (•OH), but rarely ¹O₂. Herein, we innovatively realize the selective generation of ¹O₂ via O₂ activation by a facile molybdenum (Mo)/Cu²⁺ system. In this system, Mo firstly reduces Cu²⁺ in solution to low-valence Cu⁰/Cu⁺ on its surface. Cu⁰/Cu⁺ activates O₂ to generate superoxide radical (O₂^•-). Importantly, O₂^•- can be captured immediately and oxidized to ¹O₂ by surface-bound Mo⁶⁺ rather than reduced to H₂O₂. As a result, the Mo/Cu²⁺ system can selectively produce ¹O₂. Under air and O₂ conditions, the degradation efficiency of ibuprofen by Mo/Cu²⁺ system is 67.2 % and 76.6 %, respectively. The degradation efficiencies of bisphenol A, rhodamine B and furfuryl alcohol are 77.1 %, 87.7 % and 91.1 %, respectively. The dosages of Mo and Cu²⁺ are 0.4 g/L and 3 mM, respectively, and the reaction time is 2 h. Interestingly, the activity of Mo decreased by only 4.2 % after 4 cycles. Therefore, this study provides a green pathway to selectively generate ¹O₂ for advanced oxidation processes.

Catalytic behavior of nitrous acid for acetaminophen transformation during the freezing process

This study demonstrates the transformation of acetaminophen by reactive nitrous acid in a frozen solution and its abnormal stoichiometry. The chemical reaction between acetaminophen and nitrous acid (AAP/NO₂^- system) was negligible in the aqueous solution; however, the reaction rapidly progressed if the solution started to freeze. The ultrahigh performance liquid chromatography-electrospray ionization tandem mass spectrometry measurements showed that polymerized acetaminophen and nitrated acetaminophen were formed in the proceeding reaction. Electron paramagnetic resonance spectroscopy measurements showed that nitrous acid oxidized acetaminophen via a one-electron transfer reaction producing acetaminophen-derived radical species, which is the cause of acetaminophen polymerization. We demonstrated that a relatively smaller dose of nitrite than acetaminophen caused significant acetaminophen degradation in the frozen AAP/NO₂^- system and revealed that the dissolved oxygen content notably affected acetaminophen degradation. We showed that the reaction occurs in a natural Arctic lake matrix (nitrite and acetaminophen spiked). Considering that the freezing phenomenon is common in the natural environment, our research provides a possible scenario for the freezing chemistry of nitrite and pharmaceuticals in environmental chemistry.

The debatable role of singlet oxygen in persulfate-based advanced oxidation processes

Singlet oxygen (¹O₂) attracts much attention in persulfate-based advanced oxidation processes (PS-AOPs), because of its wide pH tolerance and high selectivity toward electron-rich organics. However, there are conflicts about the ¹O₂ role in PS-AOPs on several aspects, including the formation of different key reactive oxygen species (ROS) at similar active sites, pH dependence, broad-spectrum activity, and selectivity in the elimination of organic pollutants. To a large degree, these conflicts root in the drawbacks of the methods to identify and evaluate the role of ¹O₂. For example, the quenchers of ¹O₂ have high reactivity to other ROS and persulfate as well. In addition, electron transfer process (ETP) also selectively oxidizes organics, having a misleading effect on the identification of ¹O₂. Therefore, in this review, we summarized and discussed some basic properties of ¹O₂, the debatable role of ¹O₂ in PS-AOPs on multiple aspects, and the methods and their drawbacks to identify and evaluate the role of ¹O₂. On the whole, this review aims to better understand the role of ¹O₂ in PS-AOPs and further help with its reasonable utilization.

Unveiling different antibiotic degradation mechanisms on dual reaction center catalysts with nitrogen vacancies via peroxymonosulfate activation

Metal-nitrogen-site catalysts are widely recognized as effective heterogeneous catalysts in peroxymonosulfate (PMS)-based advanced oxidation processes. However, the selective oxidation mechanism for organic pollutants is still contradictory. In this work, manganese-nitrogen active centers and tunable nitrogen vacancies were synchronously constructed on graphitic carbon nitride (LMCN) through l-cysteine-assisted thermal polymerization to reveal different antibiotic degradation mechanisms. Benefiting from the synergism of manganese-nitrogen bond and nitrogen vacancies, the LMCN catalyst exhibited excellent catalytic activity for the degradation of tetracycline (TC) and sulfamethoxazole (SMX) antibiotics with first-order kinetic rate constants of 0.136 min^-1 and 0.047 min^-1, which were higher than those of other catalysts. Electron transfer dominated TC degradation at low redox potentials, while electron transfer and high-valent manganese (Mn (V)) were responsible for SMX degradation at high redox potentials. Further experimental studies unveiled that the pivotal role of nitrogen vacancies is to promote electron transfer pathway and Mn(V) generation, while nitrogen-coordinated manganese as the primary catalytic active site determines Mn(V) generation. In addition, the antibiotic degradation pathways were proposed and the toxicity of byproducts was analyzed. This work provides an inspiring idea for the controlled generation of reactive oxygen species by targeted activation of PMS.

Insight into the effect of natural organic matter on the photooxidation of arsenite induced by colloidal ferric hydroxides in water

Surface complexation of arsenite (As(III)) on colloidal ferric hydroxide (CFH) plays an important role not only in the adsorptive immobilization of As(III) but also in the subsequent oxidation of As(III) to arsenate (As(V)) through light-induced ligand-to-metal charge transfer (LMCT) in water at near-neutral pH. However, the effects of natural organic matter (NOM), especially humic substances (HSs) and low molecular weight carboxylic acids (CAs), on the photochemistry of the CFH-As(III) system have not been sufficiently understood. In this work, the inhibition of photooxidation of As(III) in terms of the observed apparent rate constant (k_obs) by six HSs (below 16 mg L^-1) and seven CAs (below 2.5 mM) has been observed in water containing 66 μM Fe(III) and 5 μM As(III) at pH 7 under simulated solar irradiation consisting of UVA (λ_max 365 nm) and UVB (λ_max 313 nm) lights. Total inhibition factors (T) have been determined from the combined effect of light-screening factor (S) and competitive complexation factor (C), wherein both S and C varied with NOM concentration. S was obtained by determining the absorbance of NOM, and C was obtained by fitting modified Langmuir or Freundlich models to the amount of As(III) desorbed from CFH upon the addition of NOM. Statistical analysis between the experimental T_exp and the calculated one according to T_cal = S × C showed that the Freundlich model (RMSE for HS 0.1609 and for CA 0.1771) was better than the Langmuir model and was statistically robust (Q_LOO²= 0.691 > 0.5). This work provided an estimation method for the effects of NOM on As(III) photooxidation in the presence of CFH as well as a deeper understanding of the transformation of arsenic species in sunlit water.

A review of advanced oxidation process towards organic pollutants and its potential application in fracturing flowback fluid

Fracturing flowback fluid (FFF) including various kinds of organic pollutants that do harms to people and new treatments are urgently needed. Advanced oxidation processes (AOPs) are suitable methods in consideration with molecular weight, removal cost and efficiency. Here, we summarize the recent studies about AOP treatments towards organic pollutants and discuss the application prospects in treatment of FFF. Immobilization and loading methods of catalysts, evaluation method of degradation of FFF, and continuous treatment process flow are discussed in this review. In conclusion, further studies are urgently needed in aspects of catalyst loading methods, macromolecule organic evaluation methods, industrial process, and pathways of macromolecule organics' decomposition.

Carbonyl heterocycle modified mesoporous carbon nitride in photocatalytic peroxydisulfate activation for enhanced ciprofloxacin removal: Performance and mechanism

Polymer carbon nitride is considered to be a promising photocatalyst with broad application prospects in water treatment. However, the defects of pristine polymer carbon nitride (PCN), such as small specific surface area, fast photogenerated electron-hole recombination, and low mass transfer efficiency, limit its photocatalytic activity. In this work, by introducing 2-thiouracil into the precursor, a carbonyl heterocycle-containing mesoporous carbon nitride photocatalyst (TCN) was successfully obtained with significantly enhanced peroxydisulfate (PDS) photocatalytic activity. In this study, the modulation mechanism of carbonyl heterocycle introduction on surface electronic structure and the band structure were fully discussed by means of a combination of experiments and theoretical calculations. The carbonyl and vicinal carbon-modified heterocycles dominated the electrons, while the adjacent heptazine ring dominated the holes. The photogenerated electron-hole pair recombination efficiency and the electron transition energy barrier were greatly reduced. According to the findings of density functional theory (DFT) calculations, the introduction of carbonyl and vicinal C modulated the electronic structure of catalyst, enhanced the adsorption of PDS at the carbonyl ortho N site, which promoted the electronic interaction between TCN and PDS molecules. Experiments showed that the free radical pathway and non-radical pathway coexisted in TCN/PDS/Vis system. The reactive oxygen species were mainly derived from PDS molecules. DFT calculations provided a more comprehensive theoretical basis for the experimental results. This study provided a fresh perspective on the rational design of carbon nitride-based catalysts and the reaction mechanism of persulfate advanced oxidation systems.

Peroxymonosulfate activation by nitrogen-doped herb residue biochar for the degradation of tetracycline

Biochar is an environmentally friendly material with potential applications in water purification. In this study, herb residue nitrogen-doped biochar (N-BC) was fabricated and used to activate peroxymonosulfate (PMS). Characterization and density-functional theory (DFT) studies were conducted to explore the influence of nitrogen doping. Radical scavenging activity and electron paramagnetic resonance (EPR) spectroscopy revealed that non-radical singlet oxygen (¹O₂) is the main reactive oxidative species. Additionally, pyridinic-N was shown to play a pivotal role in the ¹O₂-dominated pathway. Three possible degradation pathways were proposed based on the identified degradation intermediates. Batch experiments confirmed that N-BC showed excellent catalytic performance and reusability. The best condition for tetracycline (TC) degradation efficiency (>99%) in 60 min was obtained when the dosage of N-BC was 1 g/L and the concentration of PMS was 5 mM. Furthermore, N-BC showed approximately 65.5% degradation efficiency within 4 cycles. Furthermore, the toxicity of degradation intermediates was examined using ECOSAR and T.E.S.T procedures. This study brings forth a feasible strategy to synthesize biochar. Furthermore, the proposed approach will facilitate the use of biochar in water purification.

Synthesis of an Environmentally Friendly Modified Mulberry Branch-Derived Biochar Composite: High Degradation Efficiency of BPA and Mitigation of Toxicity in Silkworm Larvae

In the present study, mulberry branch-derived biochar CuO (MBC/CuO) composite was successfully synthesized and used as a catalyst to activate persulfate (PS) for the degradation of bisphenol A (BPA). The MBC/CuO/PS system exhibited a high degradation efficiency (93%) of BPA, under the conditions of 0.1 g/L MBC/CuO, 1.0 mM PS, 10 mg/L BPA. Free radical quenching and electron spin-resonance spectroscopy (ESR) experiments confirmed that both free radicals ^•OH, SO₄^•- and O₂^•- and non-radicals ¹O₂ were involved in the MBC/CuO reaction system. Cl^- and NOM displayed negligible influence on the degradation of BPA, while HCO₃^- promoted the removal of BPA. In addition, the toxicity tests of BPA, MBC/CuO and the degraded BPA solution were conducted by the 5th instar silkworm larvae. The toxicity of BPA was reduced after the treatment in the MBC/CuO/PS system, and no obvious toxicity of the synthesized MBC/CuO composite was found in the toxicity evaluation experiments. This work provides a new value-added utilization of mulberry branches as a cost-effective and environmentally friendly PS activator.

Advanced oxidation processes for water purification using percarbonate: Insights into oxidation mechanisms, challenges, and enhancing strategies

Percarbonate (SPC) has drawn considerable attention due to its merits in the safety of handling and transport, stability, and price as well as environmental friendliness, which has been extensively applied in advanced oxidation processes (AOPs) for water decontamination. Nevertheless, comprehensive information on the application of SPC-AOPs for the treatment of organic compounds in aquatic media is scarce. Hence, the focus of this review is to shed light on the mechanisms of reactive oxygen species (ROS) evolution in typical SPC-AOPs (i.e., Fenton-like oxidation, photo-assisted oxidation, and discharge plasma-involved oxidation processes). These SPC-AOPs enable the formation of multiple reactive species like hydroxyl radical (^•OH), superoxide radical (O₂^•-), singlet oxygen (¹O₂), carbonate radicals (CO₃^•-), and peroxymonocarbonate (HCO₄^-), which together or solely contribute to the degradation of target pollutants. Simultaneously, the potential challenges in practical applications of SPC-AOPs are systematically discussed, which include the influence of water quality parameters, cost-effectiveness, available active sites, feasible activation approaches, and ecotoxicity. Subsequently, enhancing strategies to improve the feasibility of SPC-AOPs in the practical implementation are tentatively proposed, which can be achieved by introducing reducing and chelating agents, developing novel activation approaches, designing multiple integrated oxidation processes, as well as alleviating the toxicity after SPC-AOPs treatment. Accordingly, future perspectives and research gaps in SPC-AOPs are elucidated. This review will hopefully offer valuable viewpoints and promote the future development of SPC-AOPs for actual water purification.

Mo-Based Heterogeneous Interface and Sulfur Vacancy Synergistic Effect Enhances the Fenton-like Catalytic Performance for Organic Pollutant Degradation

Heterogeneous Fenton-like reactions (HFLRs) based on the in situ electrochemical generation of hydrogen peroxide (H₂O₂) are one of the green methods to remediate organic pollutants in wastewater. However, the design of Fenton-like catalysts with specific active sites and high pollutant degradation rate is still challenging. Here, MoS₂-MoC and MoS₂-Mo₂N catalytic cathodes with heterojunctions were successfully prepared, and the mechanism by which hydroxyl radicals and singlet oxygen (¹O₂) were generated cleanly without adding chemical additives other than oxygen was clarified. The composite catalysts contained more sulfur vacancies, and the catalytic cathode achieved a high paracetamol pollutant degradation efficiency with 0.17 kWh g^-1 TOC specific energy consumption. And almost 5 times higher activity was achieved compared to a pure MoS₂ catalytic cathode. Experimental studies confirmed that the production of ¹O₂ was based on the transformation of superoxide radicals by Mo⁶⁺, and ¹O₂ accounted for approximately 66% of the total degradation and enhanced the nonradical behavior in the reaction. This work provides a sustainable strategy for pollutant utilization, which is valuable for solving the difficult problems of HFLRs and developing new environmental remediation technologies.

Bicarbonate enhanced heterogeneous activation of peroxymonosulfate by copper ferrite nanoparticles for the efficient degradation of refractory organic contaminants in water

Nowadays, the treatment of residual refractory organic contaminants (ROCs) is a huge challenge for environmental remediation. In this study, a potential process is provided by copper ferrite catalyst (CuFe₂O₄) activated peroxymonosulfate (PMS, HSO₅^-) in the bicarbonate (HCO₃^-) enhanced system for efficient removal of Acid Orange 7 (AO7), 2,4-dichlorophenol, phenol and methyl orange (MO) in water. The impact of key reaction parameters, water quality components, main reactive oxygen species (ROS), probable degradation mechanism, rational degradation pathways and catalyst stability were systematically investigated. A 95.0% AO7 (C₀ = 100 mg L^-1) removal was achieved at initial pH (pH₀) of 5.9 ± 0.1 (natural pH), CuFe₂O₄ dosage of 0.15 g L^-1, PMS concentration of 0.98 mM, HCO₃^- concentration of 2 mM, and reaction time of 30 min. Both sulfate radical (SO₄^-•) and hydroxyl radical (^•OH) on the surface of catalyst were proved as the predominant radical species through radical quenching experiments and electron paramagnetic resonance (EPR) analysis. The buffer nature of HCO₃^- was partially contributed for the enhanced degradation of AO7 under CuFe₂O₄/PMS/HCO₃^- system. Importantly, according to ¹³C nuclear magnetic resonance (NMR) and EPR analysis, the positive effect of bicarbonate may be mainly attributed to the formation of peroxymonocarbonate (HCO₄^-), which may enhance the generation of ^•OH. The magnetic CuFe₂O₄ particles can be well recycled and the leaching concentration of Cu was acceptable (<1 mg L^-1). Considering the widespread presence of bicarbonate in water environment, this work may provide a safe, efficient, and sustainable technique for the elimination of ROCs from practical complex wastewater.

New insights into the degradation and detoxification of methylene blue using heterogeneous-Fenton catalyzed by sustainable siderite

The huge application of synthetic dyes caused a severe impact in the environment. In the present study, a physico-chemical strategy of heterogeneous-Fenton catalyzed by the natural ferrous ore has been established for toxic chemical degradation, of which the complex and high-expense repetitive pH adjustment procedures were escaping. And this natural heterogeneous catalyst also could be recycled and sustainable for toxic substances treatment involved in synergetic adsorption and oxidation. The siderite, served as an adsorbent and catalyst for the degradation of methylene blue (MB). Siderite exhibited a better adsorption capacity with a saturated adsorption capacity of ∼11.08 mg/g. Batch adsorption experiments have verified that adsorption rate and adsorption equilibrium followed pseudo-second-order rate model and Langmuir isotherm equation, respectively. The combination with H₂O₂, showed significant enhancement of MB degradation without any pH adjustment. The effect of siderite dosage, H₂O₂ dosage, MB concentration, initial pH, and reaction temperature on MB degradation was investigated, which also has indicated the excellent catalytic performance of siderite. About 99.71% of MB was degraded in 480 min with initial pH of 7.0, reaction temperature of 25 °C, siderite, and H₂O₂ dosage of 2.5 g/L and 122.38 mM, respectively. It was found that siderite could be reused and remained high degradation efficiency on MB after 5 times reutilization, which also could demonstrate the sustainable and effective process to degrade organic pollution. The generation of reactive species including ·OH and O2·- have been confirmed based on scavenger test and electron spin resonance (ESR) analysis, which was dominated by heterogeneous reaction. The possible degradation mechanisms of MB have been predicted based on spectrum scanning and GC-MS analysis. Moreover, acute toxicity assessment with marine photobacterium Vibrio fisheri was conducted to investigate the toxicity change in the adsorption/oxidation coupled process. This sustainable heterogeneous-Fenton technology has been verified as a promising and applicable process for toxic organic chemicals removal due to effective mineralization and detoxification assisted with the natural ore mineral through the simple operation and mild condtions.

Impact of water matrices on oxidation effects and mechanisms of pharmaceuticals by ultraviolet-based advanced oxidation technologies: A review

The binding between water components (dissolved organic matters, anions and cations) and pharmaceuticals influences the migration and transformation of pollutants. Herein, the impact of water matrices on drug degradation, as well as the electrical energy demands during UV, UV/catalysts, UV/O₃, UV/H₂O₂-based, UV/persulfate and UV/chlorine processes were systemically evaluated. The enhancement effects of water constituents are due to the powerful reactive species formation, the recombination reduction of electrons and holes of catalyst and the catalyst regeneration; the inhibition results from the light attenuation, quenching effects of the excited states of target pollutants and reactive species, the stable complexations generation and the catalyst deactivation. The transformation pathways of the same pollutant in various AOPs have high similarities. At the same time, each oxidant also can act as a special nucleophile or electrophile, depending on the functional groups of the target compound. The electrical energy per order (EEO) of drugs degradation may follow the order of EEO_UV > EEO_UV/catalyst > EEO_UV/H2O2 > EEO_UV/PS > EEO_UV/chlorine or EEO_UV/O3. Meanwhile, it is crucial to balance the cost-benefit assessment and toxic by-products formation, and the comparison of the contaminant degradation pathways and productions in the presence of different water matrices is still lacking.

Sodium tetraborate simultaneously enhances the degradation of acetaminophen and reduces the formation potential of chlorinated by-products with heat-activated peroxymonosulfate oxidation

In this study, sodium tetraborate (Na₂B₄O₇) was introduced to enhance the degradation of acetaminophen (ACT) in heat-activated peroxymonosulfate (PMS) process. The elimination of ACT in Na₂B₄O₇/heat/PMS process followed the pseudo-first order kinetics. The corresponding k_obs value with 10 mM Na₂B₄O₇ was 33.1 times higher than that in heat/PMS process. ¹O₂ and HO· were identified as primary reactive species via quenching experiments and electron paramagnetic resonance technology. B(OH)₄^-, the hydrolysis product of Na₂B₄O₇, reacted with PMS to generate HOOB(OH)₃^-. ¹O₂ was generated by the self-decomposition of PMS using B(OH)₄^- as catalyst, while HO· was produced via the breakage of peroxide bond of PMS and HOOB(OH)₃^-under high temperature. ACT was degraded by reactive species via the pathways of -NH- bond breakage, -OH replacement, -NH₂ oxidation and benzene ring cleavage. Nine transformation intermediates were detected by LC/Q-TOF/MS, and the toxicity of reaction solution decreased significantly with the elimination of ACT. Increasing Na₂B₄O₇ dosage, PMS concentration, initial pH and reaction temperature were conducive to ACT elimination. Humic acid, Cl^- and CO₃^2- inhibited the degradation of ACT heavily, while SO₄^2- and NO₃^- had the negligible effects. Moreover, B(OH)₄^- could react with free chlorine to the inert B(OH)₃OCl^- and further significantly suppress the formation of chlorinated by-products for the treatment of Cl^--containing water in Na₂B₄O₇/heat/PMS process. This study provided an effective way to enhance the oxidation capacity of heat/PMS process and suppress the formation of chlorinated by-products in chloride-containing water, and the findings had important implications for using borate buffer in the studies of PMS-based advanced oxidation processes.

Multimetallic CuCoNi Oxide Nanowires In Situ Grown on a Nickel Foam Substrate Catalyze Persulfate Activation via Mediating Electron Transfer

In situ growth of nanostructures on substrates is a strategy for designing highly efficient catalytic materials. Herein, multimetallic CuCoNi oxide nanowires are synthesized in situ on a three-dimensional nickel foam (NF) substrate (CuCoNi-NF) by a hydrothermal method and applied to peroxydisulfate (PDS) activation as immobilized catalysts. The catalytic performance of CuCoNi-NF is evaluated through the degradation of organic pollutants such as bisphenol A (BPA) and practical wastewater. The results indicate that the NF not only plays an important role as the substrate support but also serves as an internal Ni source for material fabrication. CuCoNi-NF exhibits high activity and stability during PDS activation as it mediates electron transfer from BPA to PDS. CuCoNi-NF first donates electrons to PDS to arrive at an oxidized state and subsequently deprives electrons from BPA to return to the initial state. CuCoNi-NF maintains high catalytic activity in the pH range of 5.2-9.2, adapts to a high ionic strength up to 100 mM, and resists background HCO₃^- and humic acid. Meanwhile, 76.6% of the total organic carbon can be removed from packaging wastewater by CuCoNi-NF-catalyzed PDS activation. This immobilized catalyst shows promising potential in wastewater treatment, well addressing the separation and recovery of conventional powdered catalysts.

Electron structure modulation and bicarbonate surrounding enhance Fenton-like reactions performance of Co-Co PBA

Although several strategies have been developed to improve the efficiency of heterogeneous Fenton-like reactions, investigating the relationship among the electronic properties of the catalyst surface, the complex water matrix and catalytic activity remains challenges. Herein, the electron density of the active site Co(II) in Co Prussian blue analogs (Co-PBAs) is proved to be modulated by the anion source method. The elevated electron density of Co(II) and the higher metallicity of the catalyst lead to an increase in electron transport efficiency as revealed by X-ray photoelectron spectra (XPS), Fourier transform infrared spectroscopy (FT-IR), and density functional theory (DFT) calculations. Furthermore, the negative shift of the D-band center of Co(II) can effectively release intermediates to avoid catalyst poisoning. Bicarbonate has been demonstrated to activate peroxymonosulfate (PMS) by weakening the peroxide bond. Its activation mechanism involves free radical mechanism and non-radical mechanism: the first step is the generation of HCO₄^-, then it is further hydrolyzed to generate •OH and ¹O₂, and the other is HCO₄^- interact with Co(III) to form Co(IV)=O. In addition, the degradation pathways of target contaminants p-nitrophenol and toxicity verification of intermediate products have been investigated. This study provides guidance for the research of Fenton-like reactions.

Insights into a novel CuS/percarbonate/tetraacetylethylenediamine process for sulfamethazine degradation in alkaline medium

This work presents a novel CuS/percarbonate/tetraacetylethylenediamine (CuS/SPC/TAED) process for the degradation of sulfamethazine (SMT). Results indicated that the CuS/SPC/TAED process enabled the efficient generation of peracetic acid (PAA), which can be efficiently activated by CuS in alkaline reaction media, and 93.6% of SMT was degraded in 30 min. Mechanism study revealed that the available reactive oxygen species (ROS) including hydroxyl radical (^•OH), carbonate radical (CO₃^•-), superoxide radical (O₂^•-), singlet oxygen (¹O₂), and organic radicals (R-O^•). Among them, R-O^• (acetyloxyl radical (CH₃CO₂^•) and acetylperoxyl radical (CH₃CO₃^•)) were confirmed to be the primary species that contributed to SMT degradation. Simultaneously, the role of sulfur species and carbonate ions were explored. It was found that the reductive O₂^•- and sulfur species rendered the efficient redox of Cu species. Besides, the effects of key influencing factors including SPC/TAED mole ratio, CuS dosage, initial pH, temperature, and nontarget matrix constituents on SMT degradation were examined. Finally, the degradation intermediates of SMT was identified, and the toxicity of these products was estimated by quantitative structure-activity relationship (QSAR) analysis. Overall, this work offers a new and simple strategy for antibiotic-polluted water remediation.

Monodispersed CuO nanoparticles supported on mineral substrates for groundwater remediation via a nonradical pathway

Nonradical oxidation based on singlet oxygen (¹O₂) has attracted great interest in groundwater remediation due to the selective oxidation property and good resistance to background constituents. Herein, recoverable CuO nanoparticles (NPs) supported on mineral substrates (SiO₂) were prepared by calcination of surface-coated metal-plant phenolic networks and explored for peroxymonosulfate (PMS) activation to generate ¹O₂ for degrading organic pollutants in groundwater. CuO NPs with a close particle size (40 nm) were spatially monodispersed on SiO₂ substrates, allowing highly exposure of active sites and consequently leading to outstanding catalytic performance. Efficient removal of various organic pollutants was obtained by the supported CuO NPs/PMS system under wide operation conditions, e.g., working pH, background anions and natural organic matters. Chemical scavenging experiments, electron paramagnetic resonance tests, furfuryl alcohol decay and solvent dependency experiments confirmed the formation of ¹O₂ and its dominant role in pollutants removal. In situ characterization with ATR-FTIR and Raman spectroscopy and computational calculation revealed that a redox cycle of surface Cu(II)-Cu(III)-Cu(II) was responsible for the generation of ¹O₂. The feasibility of the supported CuO NPs/PMS for actual groundwater remediation was evaluated via a flow-through test in a fixed-bed column, which manifested long-term durability, high mineralization ratio and low metal ion leaching.

Enhancement of urea removal from reclaimed water using thermally modified spent coffee ground biochar activated by adding peroxymonosulfate for ultrapure water production

To enhance the degradation of urea in reclaimed water for producing ultrapure water (UPW), thermally modified biochar (TBC) was prepared by secondary pyrolysis using spent coffee biochar with the function as an activator of peroxymonosulfate (PMS). Results showed that 94.4% of urea can be degraded effectively by the TBC-PMS system at the dosage of 0.4 g/L TBC and 2 g/L PMS under neutral and weak acid conditions. Moreover, urea removal mainly depended on the free radical pathway (SO₄^{• -} and OH^•), especially OH^•. The inorganic anions of TBC increased via secondary pyrolysis, especially carbonate and phosphate, resulting in higher electrical conductance (EC) value than the original biochar. It was conducive to activating PMS. As well, C-O, -OH worked as an active site in the TBC-PMS system, providing electrons and activating PMS. This work provides a novel strategy for UPW production using TBC-PMS system.

Photoelectrocatalytic mechanism of PEDOT modified filtration membrane

The generation of free radicals is the key to the photocatalytic efficiency. In this study, the degradation mechanism of photoelectrocatalysis (PEC) membrane could be adequately explained by exploring the generation pathway of different free radicals. The PEC membrane was prepared by gas phase polymerization of poly (3, 4-ethylene dioxythiophene) (PEDOT) on non-woven fabric, industrial filter cloth, ceramic membrane and polyvinylidene fluoride (PVDF) membrane, respectively. Three-dimensional fluorescence test showed that the optimal degradation of mixed or monomer contamination (bovine serum protein, sodium humate, and sodium alginate) was achieved by modified ceramic membrane under PEC condition. As for self-cleaning experiment, the membrane resistance decreased 65.7% when the reaction conditions changed from dark to PEC for 30 min. Combined with the characterization results, PEDOT as photocapacitance extended electron lifetime and promoted free radical generation. This system was mainly dependent on superoxide free radicals (0.01 mmol/L) and singlet oxygen (0.10 mmol/L), which came from energy and electron transfer. Oxygen vacancy could adsorb oxygen to produce superoxide radicals, which was further oxidized to singlet oxygen. In addition, the π-electron conjugated system of PEDOT accelerated the hole transfer and the separation of electrons and holes. Also, this study provided a new view of reactive oxygen species generation mechanism from PEDOT modified membrane.

Layered double hydroxide based materials applied in persulfate based advanced oxidation processes: Property, mechanism, application and perspectives

Recently, persulfate-based advanced oxidation processes (persulfate-AOPs) are booming rapidly due to their promising potential in treating refractory contaminants. As a type of popular two-dimensional material, layered double hydroxides (LDHs) are widely used in energy conversion, medicine, environment remediation and other fields for the advantages of high specific surface area (SSA), good tunability, biocompatibility and facile fabrication. These excellent physicochemical characteristics may enable LDH-based materials to be promising catalysts in persulfate-AOPs. In this work, we make a summary of LDHs and their composites in persulfate-AOPs from different aspects. Firstly, we introduce different structure and important properties of LDH-based materials briefly. Secondly, various LDH-based materials are classified according to the type of foreign materials (metal or carbonaceous materials, mainly). Latterly, we discuss the mechanisms of persulfate activation (including radical pathway and nonradical pathway) by these catalysts in detail, which involve (i) bimetallic synergism for radical generation, (ii) the role of carbonaceous materials in radical generation, (iii) singlet oxygen (¹O₂) production and several special nonradical mechanisms. In addition, the catalytic performance of LDH-based catalysts for contaminants are also summarized. Finally, challenges and future prospects of LDH-based composites in environmental remediation are proposed. We expect this review could bring new insights for the development of LDH-based catalyst and exploration of reaction mechanism.

Enhanced catalytic sulfamethoxazole degradation via peroxymonosulfate activation over amorphous CoSx@SiO2 nanocages derived from ZIF-67

In this work, the amorphous CoS_x@SiO₂ nanocages were hydrothermally synthesized by sulfurizing ZIF-67@SiO₂ in the presence of thioacetamide (TAA). The catalytic performances of CoS_x@SiO₂ nanocages as heterogeneous catalysts to activate peroxymonosulfate (PMS) for the sulfamethoxazole (SMX) degradation were systematically investigated. 100% SMX was degraded within 6 min in CoS_x@SiO₂/PMS system, indicating that the amorphous CoS_x@SiO₂ nanocages exhibited outstanding sulfate radical-advanced oxidation process (SR-AOP) activity toward SMX degradation due to the regeneration of Co²⁺ by surficial sulfur species like S^2-/S₂^2-. The effects of PMS dosages, initial pH, SMX concentrations and co-existing ions on SMX degradation efficiency were explored in detail. The SMX removal efficiency was obviously improved in the simulated wastewater containing chloride ions (Cl^-) and low-concentration bicarbonate ions (HCO₃^-). The residual PMS and the generated sulfate radical (SO₄·^-) were determined quantitatively in CoS_x@SiO₂/PMS system. A possible mechanism in CoS_x@SiO₂/PMS system was proposed based on the results of quenching experiments, X-ray photoelectron spectroscopy (XPS) analysis, electrochemical tests, and electron spin resonance (ESR). The CoS_x@SiO₂ exhibited good stability and reusability, in which 100% SMX removal was achieved even after five consecutive cycles. This work provided a strategy for regulating the stability of cobalt-based catalyst for efficient pollutant degradation by PMS activation.

Synergistic effects of ozone/peroxymonosulfate for isothiazolinone biocides degradation: Kinetics, synergistic performance and influencing factors

Synergistic effects of ozone (O₃) and peroxymonosulfate (PMS, HSO₅^-) for isothiazolinone biocides degradation was studied. The synergistic ozonation process (O₃/PMS) increased the efficiency of methyl-isothiazolinone (MIT) and chloro-methyl-isothiazolinone (CMIT) degradation to 91.0% and 81.8%, respectively, within 90 s at pH 7.0. This is 30.6% and 62.5% higher than the corresponding ozonation efficiency, respectively. Total radical formation value (R_ct,R) for the O₃/PMS process was 24.6 times that of ozonation alone. Calculated second-order rate constants for the reactions between isothiazolinone biocides and (k_SO4-,MIT and k_SO4-,CMIT) were 8.15 × 10⁹ and 4.49 × 10⁹ M^-1 s^-1, respectively. Relative contributions of O₃, hydroxyl radical (OH) and oxidation to MIT and CMIT removal were estimated, which were 15%, 45%, and 40% for O₃, OH and oxidation to MIT, and 1%, 67%, and 32% for O₃, OH and oxidation to CMIT at pH 7.0, respectively. Factors influencing the O₃/PMS process, namely the solution pH, chloride ions (Cl^-), and bicarbonate (HCO₃^-), were evaluated. Increasing the solution pH markedly accelerated O₃ decay and OH and formation, thus weakening the relative contribution of O₃ oxidation while enhancing that of OH and . Cl^- had a negligible effect on MIT and CMIT degradation. Under the dual effect of bicarbonate (HCO₃^-) as inhibitor and promoter, low concentrations (1-2 mM) of bicarbonate weakly promoted MIT and CMIT degradation, while high concentrations (10-20 mM) induced strong inhibition. Lastly, oxidation performance of O₃ and O₃/PMS processes for MIT and CMIT degradation in different water matrices was compared.

Co/N co-doped carbonized wood sponge with 3D porous framework for efficient peroxymonosulfate activation: Performance and internal mechanism

Renewable wood sponge with lamellar structure, compressibility and three-dimensional porous frameworks exhibits excellent functionalization application potential in various fields. Herein, cobalt and nitrogen (Co/N) co-doped carbonized wood sponge (CoNCWS800) was prepared successfully for peroxymonosulfate (PMS) activation to degrade sulfamethoxazole (SMX). The CoNCWS800 material exhibited admirable catalytic activity in PMS activation to oxidize SMX molecules (99.7% within 60 min). Electron paramagnetic resonance (EPR) analysis, quenching tests and electrochemical experiments confirmed the existence of both radical (SO₄^·-,·OH and O₂^·-) and non-radical (¹O₂ and direct charge transfer) pathways during the SMX degradation process. Co species were verified as major contributors for the generation of multiple radicals via activating PMS. Surface defective structure and ketonic CO groups performed the positive linear correlation with reaction kinetic constants, revealing the critical role of the two active sites in PMS activation via non-radical process. This study provides a unique insight in PMS activation mechanism via both radical and non-radical pathways of wood sponge-based functional materials.

Activation of peroxymonosulfate by iron oxychloride with hydroxylamine for ciprofloxacin degradation and bacterial disinfection

Iron oxychloride (FeOCl) is a known effective iron-based catalyst and has been used in advanced oxidation processes (AOPs). This study intends to achieve more facile free radicals generation from peroxymonosulfate (PMS) activation by exploring the Fe(III)/Fe(II) cycle of FeOCl in the presence of hydroxylamine (HA). With 0.2 g/L FeOCl, 1.5 mM PMS, and 1 mM HA, the PMS/FeOCl/HA system could effectively achieve 98.88% of the oxidative degradation of 5 mg/L ciprofloxacin (CIP) in 15 min and quickly inactivate 99.99% of E. coli (10⁸ CFU/mL) in 5 min at near-neutral pH. HA played an important role in promoting the Fe(III)/Fe(II) cycle, thereby greatly improving the oxidation activity of the system. The reactive oxygen species (ROS) such as HO, SO₄^- and O₂^- were identified as the dominated free radicals produced in the system. The intermediate products of CIP detected by liquid chromatograph-mass spectrometer (LC-MS) and three possible degradation pathways of CIP were proposed. The presence of common anions in the PMS/FeOCl/HA system, including HCO₃^-, Cl^-, SO₄^2-, and NO₃^-, enhanced the degradation efficiency of CIP to varying degrees at the concentrations of 10 mM. Moreover, FeOCl maintained a high degradation capability for CIP after several recycles. This work offers a new promising means of catalyzing the PMS-based AOPs in the degradation of refractory organics.

Treatment-driven removal efficiency, product formation, and toxicity evolution of antineoplastic agents: Current status and implications for water safety assessment

Antineoplastic compounds, designed for chemotherapeutic anticancer therapy, have become emerging contaminants of global concern over the past decade due to their ubiquitous occurrence, environmental persistence, and multiple adverse effects on aquatic ecosystems. Increasing efforts have been devoted to developing efficient strategies for remediating water containing these micropollutants. In this study, the physicochemical properties, natural attenuation, and chemical reactivity with aqueous oxidizing species of five antineoplastic drugs with the highest environmental prevalence (i.e., tamoxifen, cyclophosphamide, ifosfamide, 5-fluorouracil, and methotrexate) were summarized. The removal performance, transformation products (TPs) of varying structures, overall reaction pathways, and toxicity evolution during different treatments were evaluated and discussed. Additionally, the biodegradability and multi-endpoint toxicity of each TP were predicted using in silico QSAR software. Depending on their distinct inherent structures, the reactivity of the antineoplastics with oxidizing species varied, with hydroxyl radicals exhibiting unparalleled merits in rapid oxidation. Complete elimination of these contaminants was observed during oxidative treatments, but with inadequate mineralization. Notably, the increase in toxicity within multiple processes was determined based on both experimental bioassays and theoretical predictions. This may be attributed to the adverse effects induced by the large number of identified and unknown TPs individually and in combination. Together with the environmental persistence and low biodegradability of most TPs, these results necessitate the application of efficient post-treatments in conjunction with a more thorough water safety evaluation (e.g., using high-throughput screening) of the mixtures of treated water and wastewater.

A Review of Manganese(III) (Oxyhydr)Oxides Use in Advanced Oxidation Processes

The key role of trivalent manganese (Mn(III)) species in promoting sulfate radical-based advanced oxidation processes (SR-AOPs) has recently attracted increasing attention. This review provides a comprehensive summary of Mn(III) (oxyhydr)oxide-based catalysts used to activate peroxymonosulfate (PMS) and peroxydisulfate (PDS) in water. The crystal structures of different Mn(III) (oxyhydr)oxides (such as α-Mn₂O₃, γ-MnOOH, and Mn₃O₄) are first introduced. Then the impact of the catalyst structure and composition on the activation mechanisms are discussed, as well as the effects of solution pH and inorganic ions. In the Mn(III) (oxyhydr)oxide activated SR-AOPs systems, the activation mechanisms of PMS and PDS are different. For example, both radical (such as sulfate and hydroxyl radical) and non-radical (singlet oxygen) were generated by Mn(III) (oxyhydr)oxide activated PMS. In comparison, the activation of PDS by α-Mn₂O₃ and γ-MnOOH preferred to form the singlet oxygen and catalyst surface activated complex to remove the organic pollutants. Finally, research gaps are discussed to suggest future directions in context of applying radical-based advanced oxidation in wastewater treatment processes.

Activation of peroxymonosulfate by bicarbonate and acceleration of the reaction by freezing

This study demonstrates the positive effects of dissolved bicarbonate and carbonate anions on peroxymonosulfate (PMS) induced oxidation and the remarkable acceleration of the reaction by freezing. More than 90% of the initial 4-chlorophenol (4-CP) decomposed in the frozen case, whereas only less than 20% of the 4-CP was removed in the aqueous case in the same time period. This accelerated reaction is attributed to the freeze-concentration of the dissolved substrates (i.e., PMS, bicarbonate, and pollutants) in the quasi-liquid layer at the ice grain boundaries between ice crystals. The reaction between bicarbonate and PMS was found to be unique because none of the effects were observed in the phosphate and hydroxide cooperated system with freezing, although the base activation of PMS could participate under basic conditions (pH > 9). Based on electron paramagnetic resonance spectroscopy measurements and comparison with the photo-excited Rose Bengal system as a reference system for singlet oxygen (¹O₂) generation, ¹O₂ was found to have a minor effect on the oxidation of 4-CP in the frozen bicarbonate-PMS system. While, direct electron transfer from the target organic substrate to the PMS was suggested as a major mechanism of 4-CP oxidation, because the selected target organic substrates were decomposed with different tendencies, and the consumption of PMS was accelerated by the presence of an electron donating compound. The results show the potential applicability of the freezing phenomenon, which occurs naturally in the mid-latitude and polar area, to help a decomposition of water dissolved organic pollutants by the imitation of the natural purification process.