Dissolved organic matter binding with Pb(II) as characterized by differential spectra and 2D UV-FTIR heterospectral correlation analysis

Insight into the binding characteristics of dissolved organic matter(DOM)and Fe(Ⅱ)/Mn(Ⅱ): Based on the spectroscopic and dialysis equilibrium analysis

Dissolved organic matter (DOM) plays an important role in metal migration and transformation within inland surface waters. In our study, spectroscopic and dialysis equilibrium analysis were combined to characterize the binding properties between DOM and Fe(II)/Mn(II). Four different type of DOM including two commercial DOM: humic acid、fulvic acid, and two natural dissolved organic matter collected from macrophyte-dominant region (MDR) and algae-dominated region (ADR) of Taihu Lake. Steady state/time resolved fluorescence spectroscopy indicated that the fluorescence intensity of DOM was quenched by Fe(II)/Mn(II) through a static quenching process. The adsorption isotherm shows that the adsorption capacity of DOM from Taihu Lake for metal ions is significantly higher than that of commercial humic acid. Simultaneously, the combination of MDR and Fe(II) has the highest adsorption capacity at 110.950 mg/g among all combinations. Furthermore, the Pseudo-second-order kinetic model and Elovich model were found to be superior in describing the adsorption process, with chemical adsorption controlling the rate of the adsorption reaction. The results of this study show that potentially toxic elements (PETs) pollution in eutrophic shallow lakes may become more serious due to the excessive expansion of algae dominant regions and the reduction of macrophyte dominant regions. In addition, risk analysis and assessment of PETs should consider the contribution of metal binding capabilities.

Effect of pyrolysis temperature and molecular weight on characterization of biochar derived dissolved organic matter from invasive plant and binding behavior with the selected pharmaceuticals

A comprehensive understanding of the characteristics of biochar released-dissolved organic matter (BDOM) derived from an invasive plant and its impact on the binding behavior of pharmaceuticals is essential for the application of biochar, yet has received less attention. In this study, the binding behavior of BDOM pyrolyzed at 300-700 °C with sulfathiazole, acetaminophen, chloramphenicol (CAP), and carbamazepine (CMZ) was investigated based on a multi-analytical approach. Generally, the pyrolysis temperature exhibited a more significant impact on the spectral properties of BDOM and pharmaceutical binding behavior than those of the molecular weight. With increased pyrolysis temperature, the dissolved organic carbon decreased while the proportion of the protein-like substance increased. The highest binding capacity towards the drugs was observed for the BDOM pyrolyzed at 500 °C with the molecular weight larger than 0.3 kDa. Moreover, the protein-like substance exhibited higher susceptive and released preferentially during the dialysis process and also showed more sensitivity and bound precedingly with the pharmaceuticals. The active binding points were the aliphatic C-OH, amide II N-H, carboxyl CO, and phenolic-OH on the tryptophan-like substance. Furthermore, the binding affinity of the BDOM pyrolyzed at 500 °C was relatively high with the stability constant (logKM) of 4.51 ± 0.52.

High arsenic pollution of the eutrophic Lake Taihu and its relationship with iron, manganese, and dissolved organic matter: High-resolution synchronous analysis

Arsenic (As) is a metalloid that can accumulate in eutrophic lakes and cause adverse health effects to people worldwide. However, the seasonal process and dynamic mechanism for As mobilization in eutrophic lake remains effectively unknown. Here we innovatively used the planar optodes (PO), high-resolution dialysis (HR-Peeper) combined with fluorescence excitation-emission matrix coupled with parallel factor (EEM-PARAFAC) analysis technologies. We synchronously investigate monthly O2, As, iron (Fe), manganese (Mn), and naturally occurring dissolved organic matter (DOM) changes in sediments of Lake Taihu at high resolution in field conditions. We find high As contamination from sediments with 61.88-327.07 μg m-2 d-1 release As fluxes during the algal bloom seasons from May to October 2021. Our results show that an increase in DOM, mainly for humic-like components, resulting in high electron transfer capacity (ETC), promoted the reductive dissolution of Fe and Mn oxides to release As. Partial least square-path modeling (PLS-PM) and random forest modeling analysis identified that Mn oxide reductive dissolution directly accelerated sediments As contamination, which is the crucial factor. Understanding crucial factor controlling As release is especially essential in areas of eutrophic lakes developing effective strategies to manage As-rich eutrophic lake sediments worldwide.

Uranium removal in groundwater by Priestia sp. isolated from uranium-contaminated mining soil

Priestia sp. WW1 was isolated from a uranium-contaminated mining soil and identified. The uranium removal characteristics and mechanism of Priestia sp. WW1 were investigated. The results showed that the removal efficiency of uranium decreased with the increase of initial uranium concentration. When the uranium initial concentration was 5 mg/L, the uranium removal efficiency achieved 92.1%. The increase of temperature could promote the uranium removal. Carbon source could affect the removal rate of uranium, which was the fastest when the methanol was used as carbon source. The solution pH had significant effect on the uranium removal efficiency, which reached the maximum under solution pH 5.0. The experimental results and FTIR as well as XPS demonstrated that Priestia sp. WW1 could remove uranium via both adsorption and reduction. The common chloride ions, sulfate ions, Mn(II) and Cu(II) enhanced the uranium removal, while Fe(III) depressed the uranium removal. The Priestia sp. WW1 could effectively remove the uranium in the actual mining groundwater, and the increase of initial biomass could improve the removal efficiency of uranium in the actual mining groundwater. This study provided a promising bacterium for uranium remediation in the groundwater.

New insights into the effect of pyrolysis temperature on the spectroscopy properties of dissolved organic matter in manure-based biochar

Dissolved organic matter (DOM) derived from biochar takes a crucial role in transport and bioavailability toward contaminants; hence, it is undeniable that a thorough analysis of its properties is important. So far, the effect of pyrolysis temperature on the functional groups, components, and evolutionary sequence of manure-based biochar DOM has not been adequately investigated. Here, DOM was released from two typical livestock manures (cow and pig) at five pyrolysis temperatures (300 ~ 700°C), and it was explored in depth with the aid of moving window 2D correlation spectroscopy (MW-2D-COS) and heterogeneous 2D correlation spectroscopy (hetero-2D-COS). The results demonstrated that the concentration, aromaticity, and hydrophobicity of DOM were greater at high temperatures, and more DOM was liberated from cow manure-based biochar at identical temperature. Protein-like compounds dominated at high temperatures. The pyrolysis temperatures of final configuration transformation points of the fulvic acid-like component and the aromatic ring C=C in DOM were 400°C and 500°C, respectively. Moreover, Fourier transform infrared spectroscopy combined with two-dimensional correlation analysis indicated that the functional group evolution of DOM depends on the pyrolysis temperature and feedstock type. The study provides a new perspective on manure management and environmental applications of biochar.

Unveiling changes in the complexation of dissolved organic matter with Pb(II) by photochemical and microbial degradation using fluorescence EEMs-PARAFAC

Dissolved organic matter (DOM) is very important in determining the speciation, behaviors, and risk of metal pollutants in aquatic ecosystems. Photochemical and microbial degradation are key processes in the cycling of DOM, yet their effects on the DOM-Pb(II) interaction remain largely unknown. This was studied by examining the complexation of river DOM with Pb(II) after degradation, using fluorescence quenching titration and excitation-emission matrices-parallel factor analysis (EEMs-PARAFAC). Three humic-like and two protein-like components were identified, with strong removals of humic-like components and decreasing average molecular weight and humification degree of DOM by photo- and photo-microbial degradation. The changes in humic-like abundance and structure resulted in notable weakening of their interaction with Pb(II). The tryptophan-like C2 was also mainly removed by photo-degradation, while the tyrosine-like C3 could be either removed or accumulated. The Pb(II)-binding of protein-like components was generally weaker but was enhanced in some degradation groups, which might be related to the lowering competition from humic-like components. The binding parameters correlated significantly with the DOM indices, which were dominated by photo-degradation for humic-like components but by seasonal variations for the tyrosine-like component. These results have implications for understanding the key mechanisms underlying the variability of the DOM-metal interaction in aquatic environments.

New insight into the functional group mechanism and structure-activity relationship of the complexation between DOM and Cr(III) in landfill leachate

Widespread landfills represent a significant source of groundwater contamination. Due to the unique and diverse nature of dissolved organic matter (DOM) in landfill leachate, the interaction between DOM and heavy metals, along with its quantitative evaluation, remains unknown. Consequently, we collected ten samples from various landfill types to serve as representatives for a comprehensive investigation of the mechanism involving functional groups and Cr(III) through the establishment of a quantitative structure-activity relationship (QSAR). We employed ESI FT-ICR MS, (MW) 2D-COS, and DFT calculations for this purpose. Our findings indicate that DOM from landfill leachate contains a higher proportion of CHON molecules on intensity compared to those from natural sources. The maximum complexation capacity was determined by the proportion of proteins (69%), normalized carbon average oxidation state (16%), double bond equivalence (8%), and the number of oxygen atoms (7%) in landfill leachate DOM. Besides, N-containing groups such as N = O and C-N in landfill leachate DOM with lower humification, can exhibit stronger affinities than COOH, ArOH, CO, and polysaccharide C-O groups, which are typically identified as dominant sites in natural DOM. A QSAR model incorporating four parameters demonstrated an impressive accuracy rate of 98.8%, underscoring its reliability in predicting the complexation potential of different landfill leachate DOM with Cr(III).

Catalytic degradation of benzene over non-thermal plasma coupled Co-Ni binary metal oxide nanosheet catalysts

Non-thermal plasma (NTP) has been demonstrated as one of the promising technologies that can degrade volatile organic compounds (VOCs) under ambient condition. However, one of the key challenges of VOCs degradation in NTP is its relatively low mineralization rate, which needs to be addressed by introducing catalysts. Therefore, the design and optimization of catalysts have become the focus of NTP coupling catalysis research. In this work, a series of two-dimensional nanosheet Co-Ni metal oxides were synthesized by microwave method and investigated for the catalytic oxidation of benzene in an NTP-catalysis coupling system. Among them, Co₂Ni₁O_x achieves 60% carbon dioxide (CO₂) selectivity (S_CO2) when the benzene removal efficiency (RE_benzene) reaches more than 99%, which is a significant enhancement compared with the CO₂ selectivity obtained without any catalysts (38%) under the same input power. More intriguingly, this S_CO2 is also significantly higher than that of single metal oxides, NiO or Co₃O₄, which is only around 40%. Such improved performance of this binary metal oxide catalyst is uniquely attributed to the synergistic effects of Co and Ni in Co₂Ni₁O_x catalyst. The introduction of Co₂Ni₁O_x was found to promote the generation of acrolein significantly, one of the key intermediates found in NTP alone system reported previously, suggest the benzene ring open reaction is promoted. Compared with monometallic oxides NiO and Co₃O₄, Co₂Ni₁O_x also shows higher active oxygen proportion, better oxygen mobility, and stronger low-temperature redox capability. The above factors result in the improved catalytic performance of Co₂Ni₁O_x in the NTP coupling removal of benzene.

Complexation of copper algaecide and algal organic matter in algae-laden water: Insights into complex metal-organic interactions

Copper-based algicides have been widely used to suppress algae blooms; however, the release of algal organic matter (AOM) on account of cell lysis may cause significant changes in the mitigation, transformation, and bioavailability of Cu(II). In the present work, the binding characteristics of Cu(II) with AOM were explored via combinative characterization methods, such as high-performance size exclusion chromatography, differential absorption spectra analysis, and joint applications of two-dimensional correlation spectroscopy (2D-COS), as well as heterospectral 2D-COS and moving window 2D-COS analyses of UV, synchronous fluorescence, and FTIR spectra. Carboxyl groups displayed a preferential interaction to Cu(II) binding, followed by polysaccharides. The spectral changes of C]O stretching occur after the change of chromophores in complexation with Cu(II). The AOM chromophores exhibit obvious conformations at Cu(II) concentrations higher than 120 μM, while AOM fluorophores and functional groups exhibit the greatest changes at Cu(II) concentrations lower than 20 μM. All these observations have verified the presence of binding heterogeneity and indicate that AOM could interact with Cu(II) through diverse functional moieties. Therefore, our study contributes to the better understanding of the fate of Cu(II)-AOM complexes in aquatic systems.

Enhance antimony adsorption from aquatic environment by microwave-assisted prepared Fe3O4 nanospherolites

A novel hierarchically nanostructured magnetite (Fe3O4) was manufactured using microwave-assisted reflux method without surfactants. The nanostructured Fe3O4 is formed via the co-precipitation of Fe(III) and Fe(II), followed by a nanocrystal aggregation-based mechanism. Moreover, the effects of solution pH, contact time, initial Sb concentration, coexisting anions, and recycle numbers on the adsorption of nanostructured Fe3O4 toward Sb were extensively examined in the batch adsorption tests. The results demonstrated that the obtained Fe3O4 exhibited excellent adsorption ability toward Sb with the maximum adsorption capacities of 154.2 and 161.1 mg.g-1 for Sb(III) and Sb(V), respectively. The prepared Fe3O4 could be easily regenerated and reused for adsorption/desorption studies multiple times without compromising the Sb adsorption ability. Further exploration indicated that the oxidation or reduction reactions infrequently occurred during Sb adsorption processes. The proposed hierarchically nanostructured Fe3O4 thus could be potentially used for sustainable and efficient antimony removal.

Multiple spectroscopic insights into the interaction mechanisms between proteins and humic acid

Proteins are important constituents of dissolved organic matter (DOM) in aqueous environments, and their interaction with humic acid (HA), another key component of DOM, substantially affects the environmental behaviors of DOM. In this work, the interaction mechanisms between tryptophan-containing proteins and HA were systematically investigated using multiple molecular spectroscopic approaches. The fluorescence quenching tests indicate that bovine serum albumin (BSA) was more readily quenched by HA and the coexisting phenolic, carboxyl, and quinone groups in HA contributed to this process significantly. By comparison, the fluorescence of L-tryptophan (L-Trp) was more stable under the same conditions. Furthermore, with multiple groups in HA, static quenching with the binding constants and the number of sites were calculated in the protein-HA and L-Trp-HA mixtures. In addition, the differential fluorescence spectra, UV‒Vis spectra, and two-dimensional correlation spectroscopy results confirmed that L-tryptophan amino acid could indeed form a complex with HA, while did not lead to fluorescence quenching. Finally, the molecular docking and density functional theory (DFT) simulations highlighted the contribution of multiple residues surrounding the HA groups to their interactions. The direct interaction between the tryptophan residue and HA might not be the prerequisite for the fluorescence response. Therefore, our work provides further insights into protein-HA interactions and implies other reasonable elucidations for further explanation.

Inhibiting mechanisms of metal ion complexation on photogenerated reactive intermediates derived from dissolved black carbon

Dissolved black carbon (DBC), an important photosensitizer in surface waters, can influence the photodegradation of various organic micropollutants. In natural water systems, DBC often co-occurs with metal ions as DBC-metal ion complexes; however, the influence of metal ion complexation on the photochemical activity of DBC is still unclear. Herein, the effects of metal ion complexation were investigated using common metal ions (Mn²⁺, Cr³⁺, Cu²⁺, Fe³⁺, Zn²⁺, Al³⁺, Ca²⁺, and Mg²⁺). Complexation constants (logK_M) derived from three-dimensional fluorescence spectra revealed that Mn²⁺, Cr³⁺, Cu²⁺, Fe³⁺, Zn²⁺, and Al³⁺ quenched the fluorescence components of DBC via static quenching. The steady-state radical experiment suggested that in the complex systems of DBC with various metal ions, Mn²⁺, Cr³⁺, Cu²⁺, Fe³⁺, Zn²⁺ and Al³⁺ inhibited the photogeneration of ³DBC* via dynamic quenching, which reduced the yields of ³DBC*-derived ¹O₂ and O₂·^-. Moreover, ³DBC* quenching by metal ions was associated with the complexation constant. A strong positive linear relationship existed between logK_M and the dynamic quenching rate constant of metal ions. These results indicate that the strong complexation ability of metal ions enabled ³DBC quenching, which highlights the photochemical activity of DBC in natural aquatic environments enriched with metal ions.

Role of molecular weight-dependent spectral properties in regulating Cu(II) binding by dissolved organic matter from different sources

The complexation of metals with dissolved organic matter (DOM) under different compositions and molecular weights (MWs) will result in different environmental fate and toxicity, but the specific role and impact of DOM MWs remain less well understood. This study explored the metal binding characteristics by DOM with different MWs from different sources, including sea, river, and wetland waters. The results of fluorescence characterization showed that the >1 kDa high-molecular-weight (HMW)-DOM were mainly from terrestrial sources while the low-molecular-weight (LMW)-DOM fractions were mostly from microbial sources. Based on UV-Vis spectroscopic characterization, the LMW-DOM contained more unsaturated bonds than its HMW counterpart, and the substituents are generally dominated by polar functional groups. Summer DOM had more unsaturated bonds and a higher metal binding capacity than winter DOM. Furthermore, DOM with different MWs had significantly different Cu binding properties. In addition, Cu binding with microbially derived LMW-DOM mainly caused the change in the peak at 280 nm, while binding with terrigenous HMW-DOM resulted in the change of the 210 nm peak. Compared with the HMW-DOM, most of the LMW-DOM had stronger Cu-binding ability. Correlation analysis indicates that metal binding ability of DOM mainly depends on its concentration, number of unsaturated bonds and benzene rings, and types of substituents during interactions. This work provides an improved understanding of the metal-DOM binding mechanism, the role of composition- and MW-dependent DOM from different sources, and thus the transformation and environmental/ecological role of metals in aquatic systems.

One-step fluorometric determination of multiple-component dissolved organic matter in aquatic environments

Dissolved organic matter (DOM) is ubiquitous in aqueous environments and is composed of different components that play different but important roles in the migration and the fate of pollutants, emergence of the disinfect byproduct, thus requiring quantitative characterization. However, until now, simultaneous quantification of the main contents in DOM, i.e., saccharides, proteins, and humic substances, has been difficult, impeding us from understanding and predicting the environmental behaviors of typical pollutants. In this work, a fluorescence approach based on the excitation emission matrix (EEM), combined with a new algorithm, denoted matrix reconstruction coupled with prior linear decomposition (MR-PLD), was developed to quantify multiple DOM simultaneously. First, a set of simulated water samples consisting of glucose, tryptones, and humic acid (HA) were analyzed using MR-PLD to validate the feasibility of the method. The DOM components could be reliably determined with a higher accuracy than parallel factor analysis (PARAFAC) and Parallel Factor Framework-Linear Regression (PFFLR), also with a more convenient procedure than conventional PLD. Second, both actual simulated and experimental methods were performed to test the anti-interference performance of MR-PLD, indicating that the quantification of DOM would not be significantly impacted by other fluorophores. Finally, several actual water samples from natural waters and wastewater treatment plants were also analyzed to confirm the robustness of this method in actual aqueous environments. This study provides a new approach to characterize DOM with EEM, contributing to its convenient concentration monitoring and the further exploration of the environmental impacts.

Investigation of cytotoxic cadmium in aquatic green algae by synchrotron radiation-based Fourier transform infrared spectroscopy: Role of dissolved organic matter

The heavy metal Cd can cause severe toxicity on aquatic algae, but there are few studies on the cytotoxicity of heavy metal on algae based on synchrotron radiation technology. In this study, synchrotron radiation-based Fourier transform infrared spectromicroscopy (SR-FTIR) was used to characterize in vivo the toxic effects of Cd on Cosmarium sp. cells, emphasizing the influence of dissolved organic matter (DOM) on Cd toxicity. Results showed that, in the absence of DOM, obvious growth inhibition, cell volume reduction, and photosynthesis disruption could be observed with increasing Cd concentrations (0-500 μg/L). Based on the SR-FTIR imaging and functional group quantification, it was shown that the biosynthesis of biomolecules such as proteins, lipids, and carbohydrates was inhibited in algal cells. However, the addition of DOM caused significant heterogeneities in biomacromolecule biosynthesis that an increased biosynthesis of carbohydrates and structural lipids but an inhibited biosynthesis of proteins and storage lipids were observed. Furthermore, the correlation analysis and principal component analysis showed a good correlation between v(C-OH)/Amide II and biochemical parameters, indicating that changes of carbohydrates could be used as the biomarker to indicate the cytotoxicity of heavy metals to algal cells. These findings provide insight into the mechanisms of heavy metal cytotoxicity to aquatic algae and systematic cytotoxicity assessment under various aquatic conditions.

Temperature effects on microbial dissolved organic matter metabolisms: Linking size fractions, fluorescent compositions, and functional groups

This study elucidated the compositional and structural variations of size fractions of microbially-induced dissolved organic matter (DOM) caused by short-term temperature changes (5 to 35 °C), taking riverine DOM as an example. A simple and efficient method combining fractionation-[parallel factor analysis and two-dimensional Fourier-transform infrared correlation spectroscopy (PARAFAC-2D FTIR COS)]-correlation was introduced to link fluorescent DOM components and their structures in terms of surface functional groups. Results indicated that the higher temperature stimulated the decomposition of aromatics (sizes decreased from 10 kDa-0.22 μm to <10 kDa) and the transformation of proteins to humics (with sizes <0.22 μm); while both the higher and lower temperatures inhibited the utilization of larger-sized DOM (>0.22 μm, especially the non-fluorescence part) and synthesis of larger-sized microbial-derived proteins and humics (>0.22 μm), which may result in more smaller-sized (<10 kDa) and refractory aromatics transported from rivers to oceans in the warming future. However, the structure-determined DOM behaviors could be less affected by temperature since the fluorescent proteins and humics revealed similar functional group compositions, such as carboxyl, hydroxyl, carbonyl/aldehyde, carboxylic anhydride, and carboxamide groups. These findings have strong implications for DOM biogeochemistry in future temperature-shock scenarios. The proposed method will support in-depth analyses of structure-regulated processes from a mechanistic perspective.

Novel insights into the temporal molecular fractionation of dissolved black carbon at the iron oxyhydroxide - water interface

As the most reactive and mobile fraction of black carbon, dissolved black carbon (DBC) inexorably interacts with minerals in the biosphere. Nevertheless, the research on the mechanisms and compositions of DBC assembly at the mineral-water interface remains limited. In this study, we revealed the "kinetic architecture" of DBC on iron oxyhydroxide at novel insights based on quantitative and qualitative approaches. The results indicated that high molecular weight, highly unsaturated, oxygen-rich (such as carboxyl-rich fraction, phenolics), aliphatics, and long C chains compounds were preferentially adsorbed on the iron oxyhydroxide. 2D-COS analyses directly disclosed the sequential fractionation: aromatic and phenolic groups > aliphatic groups, and few aromatics were continuously adsorbed after the rapid adsorption. Quantitative determinations identified that aromatic and phenolic components were adsorbed rapidly over the first 60 min, while aromatics achieved the dynamic equilibrium until ∼300 min, which was consistent with the 2D-COS observations. Our findings supported the hypothesis that "mineral-OM" and "OM-OM" interactions worked simultaneously, and the adsorption might be co-driven by ligand exchange, hydrophobic interactions, and other mechanisms. This work provided the theoretical basis for organic carbon storage and turnover, and it was valuable for predicting the behaviors and fates of contaminants at the soil-water interface and surface water.

Impact of compost methods on humification and heavy metal passivation during chicken manure composting

Livestock manure is one of the main sources of heavy metals (HMs) in agricultural soil. So, it is necessary to reduce its bioavailability before used as organic fertilizer. In this study, the passivation effect of HMs and the evolution of dissolved organic matter (DOM) during four composting processes were explored. Results showed that different composting methods had a great effect on HMs passivation rate and humification degree. HMs were released during the thermophilic phase, and were bound by resynthesized humus during the cooling period. The best passivation effect of HMs was found in FV + T treatment, the passivation rate of Cu, Zn, Cd and Pb reached 63.80%, 34.07%, 86.54% and 45.14%, respectively, then followed by the treatment of NV + T and SC. UV-Vis spectra and excitation-emission matrix (EEM) spectra indicated that humus precursors were produced during thermophilic phase and the accumulation of humus mainly occurred in cooling period. This study can be used as a theoretical support for the safe utilization livestock manure.

Interactions between lead(II) ions and dissolved organic matter derived from organic fertilizers incubated in the field

This work was to study composition characteristics and the subsequent effect on the lead (Pb) binding properties of dissolved organic matter (DOM) derived from seaweed-based (SWOF) and chicken manure organic fertilizers (CMOF) during a one-year field incubation experiment using the excitation-emission matrix-parallel factor (EEM-PARAFAC) and two-dimensional correlation spectroscopy (2DCOS) analysis. Results showed that high aromatic and hydrophobic fluorescent substances were enriched in CMOF-derived DOM and SWOF-derived DOM and enhanced over time. And phenolic groups in the fulvic-like substances for SWOF-derived DOM and carboxyl groups in the humic-like substances for CMOF-derived DOM had the fastest responses over time, respectively. Moreover, both non-fluorescent polysaccharides and fluorescent humic-like substances or fulvic-like substances with aromatic (C=C) groups first participated in the binding process of Pb to SWOF-derived DOM on day 0 and 180 during the lead binding process. In contrast, humic-like substances associated with aromatic (C=C) and phenolic groups gave a faster response to Pb binding on day 360. Regarding CMOF-derived DOM, the fulvic-like substances associated with aromatic (C=C) and carboxylic groups displayed a faster response to Pb ions on day 0. Nonetheless, polysaccharides and humic-like associated with phenolic groups had a faster response on days 180 and 360. It is noteworthy that the polysaccharides, which participated in Pb binding to CMOF-derived DOM, posed a higher risk of Pb in the environment after 360 days. Therefore, these findings gave new insights into the long-term applications of commercial organic fertilizers for the amendment of soil.

Critical evaluation of the interaction between fluorescent dissolved organic matter and Pb(II) under variable environmental conditions

Dissolved organic matter (DOM) can strongly influence the behavior and risk of metal pollutants in aquatic ecosystems. However, a comprehensive study on the effects of DOM level and environmental factors on the binding of DOM with Pb(II) is lacking. This study examined the DOM-Pb(II) interaction in the river water under variable DOM level, pH, and major ions, using fluorescence excitation-emission matrices-parallel factor analysis (EEMs-PARAFAC). Four humic-like and one protein-like component were identified, and the abundant humic-like components showed higher Pb(II)-binding fractions (f) than the protein-like component. The f of PARAFAC components decreased while the conditional stability constants (logK_M) increased for the diluted DOM, indicating the influence of DOM level on its metal binding. The DOM-Pb(II) interaction was sensitive to changes in pH, with generally higher f and lower logK_M at the alkaline condition due to changes in the DOM conformation. The addition of major ions significantly decreased the fluorescence quenching by Pb(II), due to competitive effects and potential DOM conformation changes at elevated ions. Overall, our results show that the DOM-Pb(II) complexation is highly dependent on both the DOM properties and environmental factors, which have implications for optimizing the experimental conditions and for comparing the results in different environments.

Quantifying the bioaccumulation of Pb to Chlorella vulgaris in the presence of dissolved organic matters with different molecular weights

Dissolved organic matter (DOM) is ubiquitous in natural waters which exhibits obvious effects on the toxicity of heavy metals. However, information on the toxicity of heavy metals in the presence of DOMs with different molecular weights (MWs) was still unclear. In this study, Suwannee river humic acid (SRHA) and algae-derived organic matter (ADOM) were selected as typical terrestrial and microbial DOMs, with the bulk DOMs fractionating into high MW (HMW-, 1 kDa ~ 0.45 μm) and low MW (LMW-, < 1 kDa) fractions to explore the MW-dependent heterogeneities in the bioaccumulation of Pb to Chlorella vulgaris. Results showed that, regardless of DOM types, the LMW fraction exhibited more acidic groups and humic-like substances than the HMW counterparts. Presence of bulk DOM can decrease the bioaccumulation of Pb, while the specific effects were MW- and type-dependent. The LMW-SRHA enhanced the bioaccumulation of Pb while the HMW counterpart alleviated the effects. However, both the HMW- and LMW-ADOM can reduce the bioaccumulation of Pb to C. vulgaris. Moreover, the correlation analysis showed a significant positive correlation between the content of phenolic-OH and the adsorbed/internalized amounts of Pb, demonstrating that the phenolic-OH played a critical role in altering the bioaccumulation of Pb. The results obtained in this study suggest that distribution of MWs, number of acidic functional groups, and metal complexation capacity within DOM pool should be considered for the eco-environmental risk assessment of heavy metals in aquatic environments.

Influence of dissolved organic matter on methylmercury transformation during aerobic composting of municipal sewage sludge under different C/N ratios

Current knowledge about the transformation of total mercury and methylmercury (MeHg) in aerobic composting process is limited. In this study, the composition and transformation of mercury and dissovled organic matter (DOM) in aerobic composting process of municipal sewage sludge were were comprehensively characterized, and the differences among the three C/N ratio (20, 26 and 30) were investigated. The main form of mercury in C/N 20 and 26 was organo-chelated Hg (F3, 46%-60%); while the main form of mercury in C/N 30 was mercuric sulfide (F5, 64%-70%). The main component of DOM in C/N 20 and 26 were tyrosine-like substance (C1, 53%-76%) while the main fractions in C/N 30 were tyrosine-like substance (C1, 28%-37%) and fulvic-like substance (C2, 17%-39%). The mercury and DOM varied significantly during the 9 days composting process. Compared to C/N 20 and 26, C/N 30 produced the less MeHg after aerobic composting process, with values of 658% (C/N 20), 1400% (C/N 26) and 139% (C/N 30) of the initial, respectively. Meanwhile, C/N 30 produced the best compost showed greater degree of DOM molecular condensation and humification. Hg fraction had been altered by DOM, as indicated by a significant correlation between mercury species and DOM components. Notably, C/N 30 should be used as an appropriate C/N ratio to control the methylation processes of mercury and degration of DOM.

How do drying-wetting cycles influence availability of heavy metals in sediment? A perspective from DOM molecular composition

Investigating the influence mechanism of drying-wetting cycles on the availability and mobility of heavy metals in sediment from the perspective of the molecular composition of dissolved organic matter (DOM) may gain a new understanding, but little current information exists. Here, we used spectral technologies, high-resolution mass spectrometry, and elemental stoichiometry method to trace the change rules of the molecular composition of DOM in the riparian sediment of the river. Results showed that the drying-wetting cycles could benefit the degradation of labile fractions (e.g., proteins, aliphatics, and lipids) of DOM and retain the fractions with high aromaticity and molecular size (e.g., lignin). The decrease in the availability of Cd after drying-wetting alternation processes was highly related to these changes in DOM composition. However, the availability of Zn and Cu remained almost unchanged, which probably resulted from the release and depletion of N and S in sediment-derived DOM under drying-wetting alternation conditions. As for Cr, its exchangeable fraction was unchanged during the drying-wetting alternation process, likely due to its high stability in the sediment. These results have implications on the environmental geochemical cycling of heavy metals in the riparian sediment with frequent drying-wetting alternation.

Effect of short-term light irradiation with varying energy densities on the activities of nitrifiers in wastewater

Microalgal-bacterial consortium (MBC) process has been proposed as an alternative to conventional activated sludge process for nitrogen removal from wastewater. As one of the most influencing parameters, light irradiation effects on microalgae have been extensively investigated. However, light influence on the performance of nitrifiers in activated sludge and its mechanism remains unclear. In this study, the effects of three factors (light irradiation power, irradiation time and sludge concentration) on activities and physiological characteristics of ammonia-oxidizing bacteria (AOB) and nitrite-oxidizing bacteria (NOB) were systematically studied through both the Design of Experiments driven response surface methodology (RSM) approach and light-nitrification kinetic modeling. Results indicated that light irradiation with the specific light energy density (Es) at 0.0203-0.1571 kJ·mg^-1 VSS (80-160 W/400-1000 μmol·m^-2·s^-1, 2.0-5.0 h and 2750-4250 mg·L^-1) stimulated the relative AOB activities (rAOB) by 120.0%. This was supported by the increased electron transport system activity, key enzyme activity (AMO) , gene expression (amoA) and energy generation (ATP consumption) in the light treatment. Moreover, further Es increasing up to 0.18 kJ·mg^-1 VSS inhibited both AOB and NOB activities. The inhibition was ascribed to the joint light responses of metabolic disorders and lipid peroxidation. The findings enhance our understanding of nitrifiers' physiological responses to short-term light irradiation, and promote the development of MBC as a sustainable approach for wastewater treatment.

Influence of DOM characteristics on the flocculation removal of trace pharmaceuticals in surface water by the successive dosing of alum and moderately hydrophobic chitosan

Hydrophobically-modified chitosan (HC) has emerged as a promising flocculant for trace pharmaceutical removal from surface water. However, the variation in the characteristics of dissolved organic matter (DOM) in different water sources influences the efficacy of HC in removing pharmaceutical compounds. In this work, the flocculation performance of sequentially dosing alum and HC (alum+HC) for the treatment of five water types (three synthetic waters, and samples of two real waters collected from the Yangtze River and the Thames River), having different DOM and five representative pharmaceuticals (initial concentration: 100 ng/L), was assessed by bench-scale jar tests. The DOM characteristics were correlated quantitatively with the removal efficiencies (REs) of the pharmaceuticals. Density functional theory computations were performed to illuminate the interfacial interactions in the flocculation. Alum+HC exhibited a remarkably higher RE of all five pharmaceuticals (maximum RE: 73%-95%) from all waters compared to a conventional coagulant or flocculant (alum or polyacrylamide, respectively). In contrast to using HC alone, alum+HC also achieved a higher RE of pharmaceuticals with nearly half the HC dosage, thereby enhancing the cost-effectiveness of the alum+HC dosing system. Among the different key DOM characteristics, the surface charge and molecular weight of DOM had no evident correlation with RE(pharmaceutical), but the hydrophobic/hydrophilic nature and functional group composition of organic carbon of DOM were strongly correlated: Strongly hydrophobic fractions, with C-C & C=C functional groups (binding pharmaceuticals via hydrophobic association), were beneficial, while hydrophilic fractions with C-OH groups were less effective, for pharmaceutical removal. This work showed the enhanced performance of the alum+HC dosing combination in the removal of different pharmaceutical compounds from different waters, and filled the knowledge gap regarding the performance of hydrophobically-modified flocculants in the treatment of different surface water sources.

Transport and partitioning of metals in river networks of a plain area with sedimentary resuspension and implications for downstream lakes

This study showed that metal transport and partitioning are primarily controlled by suspended solids with seasonal flow regimes in plain river networks with sedimentary resuspension. Eight metal species containing iron (Fe), manganese (Mn), cadmium (Cd), chrome (Cr), copper (Cu), nickel (Ni), lead (Pb), and zinc (Zn), in multiple phases of sediments, suspended solids (>0.7 μm), colloids (1 nm-0.7 μm) and dissolved phase (<1 nm) were analysed to characterize their temporal-spatial patterns, partitioning and transport on a watershed scale. Metal concentrations were associated with suspended solids in the water column and decreased from low flow to high flow. However, metal partitioning between particulate phase (suspended solids) and dissolvable phases (colloids and dissolved phase) was reversed and increased from low flow to high flow with decreased concentration of total suspended solids and median particle size. Partition coefficients (k_p) showed differences among metal species, with higher values for Pb (354.3-649.0 L/g) and Cr (54.2-223.7 L/g) and lower values for Zn (2.5-25.2 L/g) and Cd (17.3-21.0 L/g). Metal concentrations in sediments increased by factors of 1.2-3.0 from upstream to downstream in watersheds impacted by urbanization. The behaviours of metals in rivers provide deeper insight into the ecological risks they pose for downstream lakes, where increased redox potential and organic matter may increase metal mobility due to algal blooms. Areas with heavy pollution of metals and the transport routines of metals in the river networks were also revealed in our research.

Effect of biochar-derived DOM on the interaction between Cu(II) and biochar prepared at different pyrolysis temperatures

The structure and composition of biochar-derived dissolved organic matter (DOM) at different pyrolysis temperatures differed significantly, affecting the environmental geochemical behavior of heavy metals (HMs). Herein, the binding properties of Cu(II) onto walnut-shell DOM were investigated using spectroscopic methods. The results showed that the DOM at low pyrolysis temperatures (300 °C and 500 °C) showed higher Cu(II) affinity than that at high pyrolysis temperature (700 °C). There was a preferential Cu(II) binding with fulvic-like substances (360 nm) at 300 °C, and with protein-like materials (275 nm) at 500 °C and 700 °C. The C-O group of alcohols, ethers, and esters showed preferential binding with Cu(II) at 300 °C and 700 °C pyrolysis temperatures. However, preferential bonding of Cu(II) to the C-O stretching vibration and O-H bending vibration of carboxyl was exhibited at 500 °C pyrolysis temperature. Pyrolysis temperature played a crucial role in the release of biochar-derived DOM and in the migration and bioavailability of HMs. Meanwhile, the adsorption effect of Cu(II) increased by 11.2% for biochar at 300 °C, and decreased by 15.0% and 61.1% for biochar at 500 °C and 700 °C, respectively, after the removal of DOM, suggesting that the presence of DOM influenced the adsorption behavior of biochar towards Cu(II).

Differences in the spectroscopic characteristics of wetland dissolved organic matter binding with Fe3+, Cu2+, Cd2+, Cr3+ and Zn2

Understanding of the binding characteristics of wetland dissolved organic matter (DOM) and different metals is important for the quantitative assessment of the environmental behavior of metals in wetlands. In this study, different types of spectroscopy including ultraviolet-visible absorption, Fourier transform infrared, and fluorescence spectroscopy was used to investigate the binding characteristics of Fe³⁺, Cu²⁺, Cr³⁺, Cd²⁺, and Zn²⁺ with DOM from wetland water. Differential absorption spectra identified binding sites for these five metals in this wetland DOM at 210 nm, 280 nm, 335 nm, and > 400 nm regions. The low binding capacity of DOM in this wetland with Cd and Zn indicated that the toxicity and environmental effects of these metals in this wetland warrant further study. The calculated △EEM combined with fluorescence regional integration (FRI) analysis clearly revealed that Fe and Cu preferred to bind with humic-like DOM while Cd and Zn preferred to bind with protein-like DOM in this wetland. △EEM successfully demonstrated the characteristics of DOM complexing with different metals and could be a compelling tool in evaluating metal-DOM interactions. In addition, 2D-FTIR-COS identified the binding sites and the dynamic processes of binding at the functional group level. Metals preferentially bind with the CO, CO functional group, and then binds to the OH functional group. This study revealed that different DOM components will facilitate the migration of different metals in the environment and provided new slights into an improved understanding of migration and transformation of metals in aquatic environments.

Insight into interactions of heavy metals with livestock manure compost-derived dissolved organic matter using EEM-PARAFAC and 2D-FTIR-COS analyses

Dissolved organic matter (DOM), as the most active ingredient in compost, directly determines the speciation and environmental behavior of HMs. Here, the binding properties of DOM derived from chicken-manure compost (CHM), cow-manure compost (COM) and pig-manure compost (PIM) with HMs were explored by analyses of Fluorescence excitation-emission matrix parallel factor (EEM-PARAFAC) and two-dimensional correlation Fourier transform infrared spectroscopy (2D-FTIR-COS). Results showed that the binding characteristics vary with origin of DOM and type of HMs. The fulvic-like component dominated the transformation of HMs speciation, and CHM-DOM had higher affinity with HMs and greater risk causing pollution due to its higher aromaticity, molecular weight and distribution of fluorescent components. Moreover, Cu(II) can efficiently bind to DOM with the stability constants (log k_M) ranging from 4.53 to 5.38, followed by Pb(II) (3.34-3.57), whereas Cd(II) can hardly bind to DOM. The amide and polysaccharide were the predominant sites for HMs binding in CHM-DOM, and polysaccharide and phenolic in COM-DOM, while phenolic and amide in PIM-DOM, respectively. Although the proportion of protein-like components and non-fluorescent polysaccharides in DOM were low, their role in HMs binding should not be ignored. In brief, the environmental risk caused by livestock manure compost may originate from interactions between DOM and HMs.

Effects on the complexation of heavy metals onto biochar-derived WEOM extracted from low-temperature pyrolysis

Biochar-derived water-extractable organic matter (WEOM) was obtained under low-temperature pyrolysis (300 °C) using corncob as raw material. WEOM may affect the mobility and bioavailability of soil heavy metals (HMs) through complexation when biochar was used for soil HM remediation. Herein, the characteristics of complexation between HMs (Cr(III) and Cu(II)) and biochar-derived WEOM were investigated by using spectroscopic techniques in conjunction with parallel factor (PARAFAC) analysis and two-dimensional correlation spectroscopy (2D-COS). Six components were identified by PARAFAC modeling, in which protein-, fulvic- and humic-like components accounted for 48.86%, 25.63% and 25.51%, respectively. A nonlinear model was employed to determine the conditional stability constant (K_M) and total ligand concentration (C_L) of WEOM-HM complexes. The log K_M values were in the range of 4.02-5.04 for WEOM-Cr(III) and 4.04-6.58 for WEOM-Cu(II). The 2D-COS in conjunction with log-transformed synchronous fluorescence spectroscopy (SFS) suggested that WEOM components were preferentially complexed with HMs in the following order: 433/270, 433/335, 496/270, 496/335, 370/335, 433/402, 496/402, 335/290, 402/290 for Cr(III), and 290/280, 390/280, 433/280, 496/280, 433/335, 496/335, 390/335, 433/420, 496/402, 335/290, 316/290 for Cu(II). The results of 2D-FTIR-COS suggested a preferential bonding of Cr(III) to the C-N group of alkyl, and Cu(II) to the CO group of alcohols, ethers and esters. Meanwhile, the CO group of ethers and the CN group of alkyl indicated preferential susceptibilities for the addition of Cr(III) and Cu(II) at different concentrations. In addition, protein-like components had remarkably higher total ligand concentration (C_L) than fulvic- or humic-like components.

Novel Insights into the Molecular-Level Mechanism Linking the Chemical Diversity and Copper Binding Heterogeneity of Biochar-Derived Dissolved Black Carbon and Dissolved Organic Matter

Biochar-derived dissolved black carbon (DBC) varies in chemical composition and significantly affects the environmental fate of metal ions. However, the intrinsic molecular composition of DBC fractions and their molecular interaction mechanisms with metal ions remain unclear. We propose a novel, molecular-level covariant binding mechanism to comparatively interpret the heterogeneities, active sites, and sequential responses of copper binding with molecular compounds in DBC and natural dissolved organic matter (DOM). Relatively large proportions of lipid/aliphatic/peptide-like compounds with low mass distributions and lignin-like compounds with oxidized/unsaturated groups existed in acidic- and alkaline-extracted DBC, respectively. A larger percentage of tannin-like/condensed aromatic compounds and higher average conditional stability constants (logK̅_Cu) of visible fluorescent components were found for DOM than for DBC. Overall, 200-320 Da and 320-480 Da molecular components contributed significantly to the logK̅_Cu values of UVA and visible fluorescent components, respectively, in DBC/DOM. Nitrogenous groups likely exhibited stronger binding affinities than phenolic/carboxylic groups. The sequential copper-binding responses of molecular compounds in DBC/DOM generally followed the order lipid/aliphatic/peptide-like compounds → tannin-like compounds → condensed aromatic compounds. These insights will improve the prediction of the potential effects of DBC on various contaminants and the risks of biochar application to ecosystems.

Insight into binding characteristics of copper(II) with water-soluble organic matter emitted from biomass burning at various pH values using EEM-PARAFAC and two-dimensional correlation spectroscopy analysis

The metal-binding characteristics of water-soluble organic matter (WSOM) emitted from biomass burning (BB, i.e., rice straw (RS) and corn straw (CS)) with Cu(II) under various pH conditions (i.e., 3, 4.5, and 6) were comprehensively investigated. Two-dimensional correlation spectroscopy (2D-COS) and excitation-emission matrix (EEM) -PARAFAC analysis were applied to investigate the binding affinity and mechanism of BB WSOM. The results showed that pH was a sensitive factor affecting binding affinities of WSOM, and BB WSOMs were more susceptible to bind with Cu(II) at pH 6.0 than pH 4.5, followed by pH 3.0. Therefore, the Cu(II)-binding behaviors of BB WSOMs at pH 6.0 were then investigated in this study. The 2D-absorption-COS revealed that the preferential binding with Cu(II) was in the order short and long wavelengths (237-239 nm and 307-309 nm) > moderate wavelength (267-269 nm). The 2D-synchronous fluorescence-COS results suggested that protein-like substances generally exhibited a higher susceptibility and preferential interaction with Cu(II) than fulvic-like substances. EEM-PARAFAC analysis demonstrated that protein-like (C1) substances had a greater complexation ability than fulvic-like (C2) and humic-like (C3) substances for both BB WSOM. This indicated that protein-like substances within WSOM played dominant roles in the interaction with Cu(II). As a comparison, RS WSOM generally showed stronger complexation capacity than CS WSOM although they exhibited similar chemical properties and compositions. This suggested the occurrence of heterogeneous active metal-binding sites even within similar chromophores for different WSOM. The results enhanced our understanding of binding behaviors of BB WSOM with Cu(II) in relevant atmospheric environments.

Interactions between the antibiotic tetracycline and humic acid: Examination of the binding sites, and effects of complexation on the oxidation of tetracycline

The binding between dissolved organic matter (DOM) and micro-pollutants (MPs) results in significant impacts on their migration, transformation and degradation. However, the role of the DOM/MP binding on their oxidative transformation remains poorly studied. The binding of MPs by DOM, in combination with DOM's roles as a photosensitizer and/or a competitor for free radicals, needs to be considered in the context of understanding the DOM's impacts on the oxidative degradation of MPs. This study aims to explore this aspect of DOM/MP interactions based on the quantitation of humic acid (HA) and tetracycline (TET) complexation and its role in TET removal. This study also compared the degradation of free TET versus that bound in HA-TET complexes in different oxidation processes. Fourier transform infrared (FTIR) data show that the carboxyl and phenolic hydroxyl groups in HA are the main binding sites of TET, while nuclear magnetic resonance (NMR) analysis shows the binding of TET engages its -N(CH₃)₂ groups, and two-dimensional correlation spectroscopy (2D-COS) data show that the carboxyl groups in DOM are sensitive than phenolic groups in the binding of TET. The difference between the degradation rates (Δk_obs) of the free and bound TET decreased with the increase of ionic strength using sodium nitrate, but increased with the introduction of Ca²⁺ and Mg²⁺ due to the formation of TET-Ca²⁺/Mg²⁺ complexes. Quenching experiments showed that the free radicals (•OH and •SO₄^-), PMS oxidant and UV light were the main contributors to the TET degradation in UV/PS, UV/PMS and UV/H₂O₂ processes, respectively. In-situ fluorescence time scanning and differential absorbance spectra showed that free TET was preferentially oxidized over the bound TET in all the tested treatments except UV/PS. These results provide new insights into the role of DOM/MP complexation in the degradation of MPs in natural and engineered systems.

The change of water content and role of microbe in the sludge drying process

In this study, the pure terephthalic acid sludge was treated by a drying process which was an economical and environmentally method. The water change and metabolic pathways for bacterial community function prediction were analyzed. The microbial community changes were studied by high-throughput sequencing to draw the dynamic succession model. Then multiple statistics was used to determine the key factors of the reduction. The results showed that the main stage of water loss in the PTA sludge drying process was the high temperature period where the water lost by evaporation accounted for more than 90% of the total removal. The main metabolic pathways for bacterial community function were amino acid (7.72%-8.71% of Kyoto encyclopedia of genes and genomes relative abundance and 8.26%-9.51% of Cluster of orthologous groups of proteins relative abundance) and carbohydrate metabolism. The model describing the dynamic succession of microbial communities showed that the dominant bacteria changed from Nitrospira, Novosphingobium and Azohydromonas to Pseudomonas, Paeniglutamicibac and Pelotomaculum. The key factors for water loss were Gemmatimonas, Novosphingobium and Azohydromonas with the correlation coefficients of 0.887, 0.772, 0.783, respectively; the key factors for dry matter loss were Pelotomaculum, total organic matter, dissovlved organic carbon and carbon/nitrogen ratio; the key factors for toxic substance loss were Brevundimonas, Novosphingobium and Gemmatimonas. These results provided theoretical support for the application and demonstration for hazardous waste sludge reduction.

Investigation of carbon dynamics in rhizosphere by synchrotron radiation-based Fourier transform infrared combined with two dimensional correlation spectroscopy

Rhizosphere, formed via the input of root exudates, is one of the most dynamic biological interfaces on earth. Investigation of carbon dynamics in rhizosphere is thus crucial for the understanding of soil biogeochemical processes. Herein, synchrotron radiation-based Fourier transform infrared (SR-FTIR) combined with two dimensional correlation spectroscopy (2D-COS) was used to probe and identify the changes of chemical constituents and functional groups of organic carbon on the root/soil interface in rhizosphere of two plants [Leptochloa chinensis (L.) Nees and Cyperus rotundus L.]. The SR-FTIR results showed obviously heterogeneous distributions of functional groups in rhizosphere at microscale. Specifically, regardless of plant species, about 20-30 μm regions in rhizosphere can be affected by root activities. The peak area ratios of organic-OH and aliphatic-C to clay-OH on the root/soil interface in rhizosphere were 4.04-8.48 times higher than that in bulk soil, providing direct evidence of the organic carbon storage due to root activities. 2D-COS analysis suggested that the root activities induced the first adsorption or sequestration of newly organics (3350 cm^-1) on the root/soil interface, followed by the destruction of clay-OH (3621 or 860 cm^-1), leading to the release of mineral associated organics and nutrients (e.g., 1510 and 1150 cm^-1) from the soil. These results can enlarge our knowledge on the concentration, distribution, and dynamics of organic carbon in rhizosphere at the microscale level and also the environmental behaviors and fate of other elements and contaminants that associated with organic carbon in rhizosphere. CAPSULE: SR-FTIR combined with 2D-COS can explore the distribution and dynamics of organic carbon on the root/soil interface in rhizosphere.

Insight into metal binding properties of biochar-derived DOM using EEM-PARAFAC and differential absorption spectra combined with two-dimensional correlation spectroscopy

A large amount of biochar-derived dissolved organic matter (BDOM) will be released into the environment with biochars application into repairing soil/water, which may alter the fate and transport of contaminants. In this study, four DOM samples were extracted from cauliflower root biochar (CRBC), reed straw biochar (RSBC), corn stalks biochar (CSBC), and potato stalk biochar (PSBC). Excitation-emission matrix combined with parallel factor (EEM-PARAFAC) analysis, differential absorbance spectra (DAS), and two-dimensional correlation spectroscopy (2D-COS) analysis were applied to explore the complexation property of BDOM with metals. DAS showed sites heterogeneity within the DOM pool for metals complexing. Humic-like and fulvic-like substances were main fluorescent components identified by EEM-PARAFAC. 2D-COS analysis revealed that polysaccharides and aliphatic firstly responded to Pb(II) binding with CRBC-derived DOM and three other biochar-derived DOM, respectively. While aliphatic groups, aromatic N=O, and polysaccharides gave the fastest response to Cu(II) binding with CRBC, RSBC, and the other two biochar-derived DOM, respectively.

Advances in the characterization and monitoring of natural organic matter using spectroscopic approaches

Natural organic matter (NOM) is ubiquitous in environment and plays a fundamental role in the geochemical cycling of elements. It is involved in a wide range of environmental processes and can significantly affect the environmental fates of exogenous contaminants. Understanding the properties and environmental behaviors of NOM is critical to advance water treatment technologies and environmental remediation strategies. NOM is composed of characteristic light-absorbing/emitting functional groups, which are the "identification card" of NOM and susceptive to ambient physiochemical changes. These groups and their variations can be captured through optical sensing. Therefore, spectroscopic techniques are elegant tools to track the sources, features, and environmental behaviors of NOM. In this work, the most recent advances in molecular spectroscopic techniques, including UV-Vis, fluorescence, infrared, and Raman spectroscopy, for the characterization, measurement, and monitoring of NOM are reviewed, and the state-of-the-art innovations are highlighted. Furthermore, the limitations of current spectroscopic approaches for the exploration of NOM-related environmental processesand how these weaknesses/drawbacks can be addressed are explored. Finally, suggestions and directions are proposed to advance the development of spectroscopic methods in analyzing and elucidating the properties and behaviors of NOM in natural and engineered environments.

Understanding synergistic mechanisms of ferrous iron activated sulfite oxidation and organic polymer flocculation for enhancing wastewater sludge dewaterability

The bound water in waste activated sludge (WAS) is trapped in extracellular polymeric substances (EPS) in the form of gel-like structure, leading to a great challenge in the sludge deep dewatering. Traditional flocculation conditioning is unable to destroy EPS and ineffective to remove the bound water in WAS. In this study, we employed integration of Fe(II)-sulfite oxidation and polyacrylamide flocculation (F/S-PAM) treatment for removing the bound water and improving sludge dewaterability under aerobic conditions. Meanwhile, the floc microstructure and EPS properties were examined to understand the mechanisms of F/S-PAM conditioning. F/S produced SO₃^·- radicals which could decompose the EPS in sludge, releasing bound water into free water. In addition, the formed Fe(III) from F/S led to re-coagulation of decomposed EPS, and C=O groups of tryptophan played the leading role in Fe-EPS association binding, causing transformation of the secondary structure of proteins (especially β-sheets and α-helices). Then, the introduction of PAM caused re-flocculation of disintegrated sludge flocs, enhancing the sludge filterability. This work provides a novel and cost-effective method for efficient removal of bound water in sludge, and subsequence improvement in sludge dewaterability.

Effect of different DOM components on arsenate complexation in natural water

Dissolved organic matter (DOM) and dissolved ions are two integral parameters to affect the environmental fate of As in different ways. Numerous studies chose surrogate of DOM, humic substances (HSs), to investigate the As complexation behavior. However, microbial secretion (protein and polysaccharide) was also considered for a great proportion in surface aquatic system, and its effect was still not fully understood. The present research distinguished the As complexation behavior with different DOM components (HSs, protein, polysaccharide and synthetic organic matter) in natural and simulated water samples. The results indicated that different DOM components exhibited various binding capacities for As. HSs showed the strongest affinity for As, followed by long-chain compounds (polysaccharide and synthetic organic matter) and proteins. In water source, HSs were probably the primary parameter for As complexation. In eutrophic water system, however, polysaccharide maybe the main DOM component to bind As. Cationic bridge function was prone to occur in the presence of HSs, but not observed in the presence of protein. PO₄^3- competed for binding sites with As, consequently decreasing the As complexation with all the DOM components. The research implied that a comprehensive and meticulous analyses of DOM fractions and coexist ions are the prerequisite to understanding the behavior of As (or other pollutants) in different natural aquatic systems.

Characterization of dissolved organic matter in the rhizosphere of phytostabilizer Athyrium wardii (Hook.) involved in enhanced metal accumulation when exposed to Cd and Pb co-contamination

The characterization of DOM and its effect on heavy metal solubility in soils have been widely concerned, while few concerns on the phytostabilization of multi-metal contaminated soils. A pot experiment was performed to characterize dissolved organic matter (DOM) in the rhizosphere of the mining ecotype (ME) and non-mining ecotype (NME) of Athyrium wardii (Hook.) when exposed to Cd and Pb simultaneously, and investigate its effect on Cd and Pb solubility in soils. The ME presented more DOM in the rhizosphere when exposed to Cd and Pb simultaneously than that exposed to single Cd or Pb, and also than the NME. The acid fractions (hydrophilic acid, hydrophobic acid) and hydrophilic fractions (hydrophilic acid, hydrophilic neutral, and hydrophilic base) were the dominant parts of DOM in the ME rhizosphere. The ME presented more acid and hydrophilic fractions in the rhizosphere when exposed to Cd and Pb simultaneously. Meanwhile, there were more O-H, C-O, N-H and C-H, assigned to carboxylic groups, phenolic groups, hydroxyl groups, and/or amino groups, present in DOM from the rhizosphere of ME when exposed to Cd and Pb simultaneously. These results highlighted the acid characteristics of DOM in the rhizosphere of ME when exposed to Cd and Pb simultaneously. DOM in the rhizosphere of ME thereby showed greater complexation degree for Cd (68%) and Pb (77%), thus showing greater ability to enhance Cd and Pb solubility in soils when exposed to Cd and Pb simultaneously. This is thereby considered to be one of the key processes for enhancing Cd and Pb uptake by the ME when exposed to Cd and Pb simultaneously.

Reduction of sludge by a biodrying process: Parameter optimization and mechanism

Sewage sludge generated from chemical fiber plants is a hazardous waste with high disposal costs, and it is important to reduce the amount of sludge produced. In this study, a biodrying technology was controlled by thermophilic microorganisms to reduce and detoxify hazardous waste sludge. Ten batches of experiments were conducted under optimal parameters (i.e., under the conditions of a one-time feeding with the equipment temperature controlled at 60 °C, where the dosage of the microbial agent accounted for 4% of the dry weight of sludge) to evaluate the performance of the biodrying system reducing and detoxifying hazardous waste sludge under a continuous reaction. The results showed that the degree and rate of dehydration during the continuous reaction were 65.97% and 2.51%, respectively. The degrees of reduction for dry matter and toxic substances were 22% and 9%, respectively. The calorific value of sludge after treatment increased from 1678.53 J (later abbreviated as J) to 12256.17 J. The reduction effect in the pilot-scale experiment was 65%. Spectral analysis and microbial sequencing of the freeze-dried sludge advance our understanding of biodrying mechanisms and provide a foundation for the application of key technologies for the reduction and detoxification of hazardous waste sludge.

Investigation of eluted characteristics of fulvic acids using differential spectroscopy combined with Gaussian deconvolution and spectral indices

The characteristics of subfractions of soil fulvic acid (FA₃, FA₅, FA₇, FA₉, and FA₁₃) using stepwise elution from XAD-8 resin with pyrophosphate buffers were investigated by differential absorption spectroscopy (DAS) and differential fluorescence spectroscopy (DFS) combined with mathematical deconvolution and spectral indices. The log-transformed absorbance spectra (LTAS) exhibited three regions for both acidic-buffer-eluted subfractions (AESF) and neutral-buffer-eluted subfraction (NESF) and four regions for basic-buffer-eluted subfractions (BESF) according to the differences in spectral slopes. The DAS spectra of FA subfractions were closely fitted with seven Gaussian bands with maxima location at 199.66, 216.18 ± 1.50, 246.20 ± 3.85, 285.22 ± 7.26, 345.64 ± 5.30, 389.27, and 307.37 nm, respectively (R² > 0.993). The content of salicylic-like and carboxyl groups in FA subfractions decreased, while the phenolic chromophore increased with elution sequence. From the 11 spectral indices, AESF had greater molecular weight, condensation, polymerization, hydroxyl radical production, humification degree, and terrigenous contribution, as well as contained more conjugated aromatic structures and less N-containing groups than NESF and BESF. The humification degree and humic characters of FA subfractions were closely associated to the aromaticity, molecular condensation, and DOM-metal-bound functional groups. The proper separation of FA into subfractions is beneficial for reducing its complexity and heterogeneity, which helps us to further explore its chemical properties and interactions with various contaminants in soil environments. Graphical abstract.

Glycerol's generalized two-dimensional correlation IR/NIR spectroscopy and its principal component analysis

In this manuscript, the fundamental vibration, the combination vibration and the first overtone vibration of the glycerol hydroxyl were studied by near-infrared and infrared spectroscopy. The composition and variation of hydrogen bond were analyzed by two-dimensional correlation spectroscopy and principal component analysis. The analysis revealed five types of hydroxyl and verified the existence of independent, intramolecular, as well as intermolecular, hydrogen bond hydroxyl. The principal component analysis showed that there were three main forms of glycerol association: the first and second principal components explained the majority of the spectral features, and the third was mainly the independent hydroxyl. The results provided insight into the structure of glycerol and illustrated the potential for using these tools in analyzing bonding in even more complex systems.

Characterization for the transformation of dissolved organic matters during ultraviolet disinfection by differential absorbance spectroscopy

The transformation of dissolved organic matter (DOM) during various disinfection processes has raised great concerns due to the generation of carcinogenic disinfection by-products (DBPs). Ultraviolet (UV) irradiation is an effective method for drinking water disinfection, during which DOM undergoes changes in functional groups and molecular weight. In this study, the spectrophotometric titration and gel permeation chromatography (GPC) determination were employed to investigate the changes in oxygenated groups and weight-averaged molecular weight (M_w) of two typical DOM during UV irradiation. The differential absorbance spectra (DAS) of DOM could be deconvoluted into six Gaussian bands. The change of relative band intensity was attributed to the change of oxygenated groups (carboxylic and phenolic groups), which was confirmed by combining DAS data and revised Non-Ideal Competitive Adsorption -Donnan model. The GPC result demonstrated that the M_w of DOM decreased after UV disinfection. Moreover, a linear correlation between M_w and the intensity of deconvoluted Gaussian band from DAS was established, which might be served as an alternative approach to estimate M_w and predict the hydrophobicity and DBPs formation potential of DOM in drinking water treatment and monitoring.

Experimental and modeling study of proton and copper binding properties onto fulvic acid fractions using spectroscopic techniques combined with two-dimensional correlation analysis

Fulvic acid (FA) significantly influences the bioavailability and fate of heavy metals in environments, while its acid-base characters and metal binding processes are still unclear. Here, spectroscopic techniques combined with multiple models (e.g., NICA-Donnan model) and two-dimensional correlation spectroscopy (2D COS) were applied to explore the proton and copper binding properties of FA sub-fractions (FA₃-FA₁₃). The charge densities, average contents of carboxylic and phenolic groups, average dissociation constants pKa₁ and pKa₂ of sub-fractions ranged 0-16 meq∙g∙C^-1, 5.03-9.58 meq∙g∙C^-1, 2.52-4.67 meq∙g∙C^-1, 4.15-4.33 and 8.52-9.72, respectively. FA sub-fractions had a relatively narrow distribution of carboxyl group and a broad distribution of phenolic group. FA sub-fractions also exhibited roughly two phenolic hydroxyl groups per every 1-3 phenyl rings. Differential absorbance spectra (DAS) derived Gaussian bands were associated to the inter-chromophore interactions, the changes of molecular conformations and functional groups with copper addition. Differential spectra slopes (DSlope_{275-295&325-375}) were more significant with higher copper concentration and copper amounts bonded to carboxylic groups. UV-Vis and fluorescence spectra with 2D heterospectral COS revealed the copper binding heterogeneities and sequential orders of chromophores and fluorophores, quantitatively confirming by the order of conditional stability constants (log K_Cu: 4.64-5.56). Salicylic-/polyhydroxyphenolic, hydroxyl and amino groups were strongly associated to the basic units for fluorophores. Sequential changes followed the order of humic-like→fulvic-like materials for FA₃/FA₅, humic-like→fulvic-like→tryptophan-like materials for FA₇, and humic-like→tryptophan-like→fulvic-like→tyrosine-like materials for FA₉/FA₁₃. Spectroscopic techniques combined with various models (especially for 2D COS) are beneficial to elucidate the binding heterogeneity and sensitivity for metal-organic matters at the functional group level.

In situ investigation of intrinsic relationship between protonation behavior and HA characteristics in sediments

Proton-binding study of humic acid (HA) is critical for describing and modeling the binding mechanism of HA with heavy metals. However, little is known about the intrinsic relationship between protonation behavior and HA characteristics, especially in sediments. In this study, HA was extracted from sediments and combination of spectrographic titration with parallel factor analysis, Gaussian fitting model and two-dimensional correlation spectroscopy analysis was developed as a novel in-situ tool. Results indicated that the intensity changes of fluorophores of sediment HA might be dependent on the structure characteristics (fused or non-fused ring) of phenolic species in the protonation process. Compared with phenolic groups (A1, 5.27 ± 0.05 eV; A3, 3.91 ± 0.02 eV), the carboxyl groups (A2, 4.65 ± 0.03 eV) exhibited greater contribution in the response of chromophores to the protonation process of sediment HA. Furthermore, proton binding to sediment HA first occurred in carboxyl groups and then in phenolic groups. The combined technique is a promising approach for the examination of the binding sites, binding capacities, and binding order in proton-HA binding process under environmental concentrations. Importantly, this method is a sensitive, effective and non-destructive technique without any need pre-concentrate.