The DBP exposome: Development of a new method to simultaneously quantify priority disinfection by-products and comprehensively identify unknowns

Quantification Approaches in Non-Target LC/ESI/HRMS Analysis: An Interlaboratory Comparison

Nontargeted screening (NTS) utilizing liquid chromatography electrospray ionization high-resolution mass spectrometry (LC/ESI/HRMS) is increasingly used to identify environmental contaminants. Major differences in the ionization efficiency of compounds in ESI/HRMS result in widely varying responses and complicate quantitative analysis. Despite an increasing number of methods for quantification without authentic standards in NTS, the approaches are evaluated on limited and diverse data sets with varying chemical coverage collected on different instruments, complicating an unbiased comparison. In this interlaboratory comparison, organized by the NORMAN Network, we evaluated the accuracy and performance variability of five quantification approaches across 41 NTS methods from 37 laboratories. Three approaches are based on surrogate standard quantification (parent-transformation product, structurally similar or close eluting) and two on predicted ionization efficiencies (RandFor-IE and MLR-IE). Shortly, HPLC grade water, tap water, and surface water spiked with 45 compounds at 2 concentration levels were analyzed together with 41 calibrants at 6 known concentrations by the laboratories using in-house NTS workflows. The accuracy of the approaches was evaluated by comparing the estimated and spiked concentrations across quantification approaches, instrumentation, and laboratories. The RandFor-IE approach performed best with a reported mean prediction error of 15× and over 83% of compounds quantified within 10× error. Despite different instrumentation and workflows, the performance was stable across laboratories and did not depend on the complexity of water matrices.

Database and review of disinfection by-products since 1974: Constituent elements, molecular weights, and structures

Since trihalomethanes were discovered in 1974, disinfection by-products (DBPs) in drinking water have attracted extensive attention. In 2011, more than 600 known DBPs were compiled; however, newly reported DBPs have not been integrated. The rapid development of mass spectrometry has led to a significant increase in the number of DBPs, therefore, there is a need to develop a database of all DBPs and their properties. Herein, a database including 6310 DBPs (651 confirmed, 1478 identified and 4142 proposed) reported between 1974 and 2022 was constructed and made available for public use at https://dbps.com.cn/main. This database can be a tool in screening new DBPs, comprehensively reviewing, and developing predictive models. In this paper, to demonstrate the functions of the database and provide useful information for this area, the origin of the collected DBPs was presented, and some basic information, including elemental composition, molecular weight, functional groups, and carbon frameworks, were comparatively analyzed. The results showed that the proportion of DBPs verified by standard compounds and frequently detected in real water is less than 7.0%, and most of DBPs remained to be identified. Approximately 88% of DBPs contain halogens, and brominated -DBPs occupied a similar ratio to chlorinated -DBPs in real water. Acids were the main functional groups of DBPs, aliphatic and aromatic compounds are the two major carbon frameworks, and the molecular weights of most DBPs ranged from 200 to 400 Da. In addition, 4142 proposed DBPs as obtained using high-resolution mass spectrometry, were characterized based on the modified van Krevelen diagram and adjusted indexes with halogens. Most of the proposed DBPs featured lignin and tannin structures, and phenolic/highly unsaturated DBPs account for the majority.

Performance evaluation of artificial intelligence with particle swarm optimization (PSO) to predict treatment water plant DBPs (haloacetic acids)

The prevention of water-borne diseases requires the disinfection of water consumed. Disinfection by-products, however, are an increasing concern, and they require advanced knowledge of water treatment plants before their release for human consumption. In this study, multivariate non-linear regression (MNR) and adaptive neuro-fuzzy inference system (ANFIS: Grid partition - GP and Sub-clustering - SC) integrated with particle swarm optimization (PSO) were proposed for the prediction of haloacetic acids (HAAs) in actual distribution systems. PSO-ANFIS-GP and PSO-ANFIS-SC were trained and verified for a total of 64 sets of data with eight parameters (pH, Temperature, UVA254, DOC, Br-; NH4+-N; NO2--N, residual free chlorine). With MNR, R2 is 0.5184 Collapse

Key Words

• Grid partition
• Haloacetic acids
• Multivariate non-linear regression
• Particle swarm optimization
• Sub-clustering

Collapse

MESH Headings

• Humans
• Artificial Intelligence
• Water Purification
• Neural Networks, Computer
• Fuzzy Logic
• Disinfection

Collapse

Grants Collapse

Affiliation(s)

Anthony I Okoji Department of Chemical Engineering, Covenant University, Ota, Ogun state, Nigeria.
Comfort N Okoji Department of Biology and Forensic, Admiralty University, Ibusa, Delta state, Nigeria
Olorunfemi S Awarun Department of Microbiology, Landmark University, Omu-Aran, Kwara state, Nigeria

Collapse

Differences in the degradation behavior of disinfection by-products in UV/PDS and UV/H2O2 processes and the effect of their chemical properties

In this work, sixteen typical chlorinated and brominated aromatic disinfection by-products (DBPs) were selected as examples to investigate their different degradation mechanisms initiated by HO• and SO4•-. Addition reactions were the main mode of degradation of DBPs by HO•, while SO4•- dominated H-abstraction reactions and single electron transfer reactions. Chlorinated compounds had higher reactivity than brominated compounds. Furthermore, substituents with stronger electron-donating effects promoted the electrophilic reaction of DBPs with the two radicals. In addition, we developed a model based on the chemical properties LUMO, fmax-, and hardness for predicting the average reaction energy barriers for the initial reactions of DBPs with HO• and SO4•-. The model had good predictive performance for the difficulty of degradation of different DPBs by HO• and SO4•-, with R2 values of 0.85 and 0.87, respectively. Through the degradation efficiency simulation, we found that longer reaction times, higher oxidant concentrations and lower pollutant concentrations were more favorable for the removal of DBPs. The UV/PDS process showed better degradation of DBPs than the UV/H2O2 process. In addition, most degradation products of DBPs exhibited less toxicity to aquatic organisms than their parent compounds. This study provided theoretical guidance for the degradation and removal of other aromatic DBPs at the molecular level.

Water, Water Everywhere, but Every Drop Unique: Challenges in the Science to Understand the Role of Contaminants of Emerging Concern in the Management of Drinking Water Supplies

The protection and management of water resources continues to be challenged by multiple and ongoing factors such as shifts in demographic, social, economic, and public health requirements. Physical limitations placed on access to potable supplies include natural and human-caused factors such as aquifer depletion, aging infrastructure, saltwater intrusion, floods, and drought. These factors, although varying in magnitude, spatial extent, and timing, can exacerbate the potential for contaminants of concern (CECs) to be present in sources of drinking water, infrastructure, premise plumbing and associated tap water. This monograph examines how current and emerging scientific efforts and technologies increase our understanding of the range of CECs and drinking water issues facing current and future populations. It is not intended to be read in one sitting, but is instead a starting point for scientists wanting to learn more about the issues surrounding CECs. This text discusses the topical evolution CECs over time (Section 1), improvements in measuring chemical and microbial CECs, through both analysis of concentration and toxicity (Section 2) and modeling CEC exposure and fate (Section 3), forms of treatment effective at removing chemical and microbial CECs (Section 4), and potential for human health impacts from exposure to CECs (Section 5). The paper concludes with how changes to water quantity, both scarcity and surpluses, could affect water quality (Section 6). Taken together, these sections document the past 25 years of CEC research and the regulatory response to these contaminants, the current work to identify and monitor CECs and mitigate exposure, and the challenges facing the future.

Traditional methods and biosensors for detecting disinfection by-products in water: A review

In recent years, pollution caused by disinfection by-products (DBPs) has become a global concern. Initially, there were fewer contaminants, and the mechanism of their generation was unclear; however, the number of contaminants has increased exponentially as a result of rapid industrialization and numerous economic activities (e.q., during the outbreak of COVID-19 a surge in the use of chlorinated disinfectants was observed). DBP toxicity results in various adverse health effects and organ failure in humans. In addition, it profoundly affects other forms of life, including animals, plants, and microorganisms. This review comprehensively discusses the pre-treatment methods of traditional and emerging DBPs and the technologies applied for their detection. Additionally, this paper provides a detailed discussion of the principles, applicability, and characteristics of traditional large-scale instrumentation methods (such as gas/liquid/ion chromatography coupled with mass spectrometry) for detecting DBPs based on their respective detection techniques. At the same time, the design, functionality, classification, and characteristics of rapid detection technologies (such as biosensors) are also detailed and analyzed.

Photodegradation of halogenated organic disinfection by-products: Decomposition and reformation

In this study, the photodegradation of 33 different DBPs (trihalomethanes, haloacetic acids, haloacetaldehydes, and haloacetonitriles) and TOX with low pressure UV light and the subsequent reformation of DBPs with chlorine and monochloramine were investigated. Results indicated that photodegradation followed the order of TOI > TOBr > TOCl, and treated surface water with low SUVA254 background did not impact the photodegradation of highly UV susceptible DBPs such as triiodomethane (TIM), diiodobromomethane (DIBM), tribromomethane (TBM). The mass balance results of chloride, bromide and iodide showed that the main photodegradation mechanism of TOBr and TOI was dehalogenation supported by halide releases (i.e., Cl-, Br- and/or I- ion). In addition, the photodegradation removal effect was higher, when brominated DBPs formation was high. Although low pressure UV light effectively removed halogenated organic DBPs, subsequent use of disinfectants (Cl2 and NH2Cl) reformed photodegraded DBPs, and the overall DBPs concentrations were increased, which suggested that the released Br- and I- ions will reform DBPs in distribution systems, with oxidants present or added (e.g., booster chlorination) in distribution systems. This study showed that although UV photodegradation will reduce halogenated organic DBPs in distribution systems, especially more toxic iodinated and brominated DBPs, it will be a more effective technology towards the end of the distribution system or a point of entry solution rather than in distribution system with post-disinfection and residence time.

Health risk assessment of heavy metals and disinfection by-products in drinking water in megacities in China: A study based on age groups and Monte Carlo simulations

Heavy metal(loid)s (HMs) and disinfection by-products (DBPs) in drinking water pose risks to human health and jeopardize drinking water. Water-related behaviors vary significantly among different age groups and regions. In this study, the carcinogenic and non-carcinogenic risks of HMs (As, Cd, Cr6+, Cu, Pb, and Zn) and DBPs (bromodichloromethane (BDCM), bromoform, chloroform, dibromochloromethane (DBCM), dichloroacetic acid (DCAA), and trichloroacetic acid (TCAA)) in drinking water in two Chinese megacities (Beijing in North China and Guangzhou in South China) via multiple exposure pathways were assessed. The results showed that children aged 9 months to 2 years had a total carcinogenic risk (TCR) and hazard index (HI) above acceptable levels, indicating that despite the drinking water quality in the selected megacities meeting the current Chinese national standards (GB 5749-2022), the health risks of exposure to HMs and DBPs in drinking water for local young children should not be neglected. Specifically, the carcinogenic risk (CR) of exposure to As in drinking water for children < 18-years-old, who were divided into different age groups, was 1.5-2.0- and 4.5-5.9-times higher than the TCR of exposure to DBPs in Beijing and Guangzhou, respectively. Regarding children aged 9 months to 2 years, the exposure to TCAA accounted for the largest proportion (35.6 %) of the TCR of exposure to DBPs in Beijing drinking water, 5.4-times higher than that in Guangzhou; whereas, the TCR of exposure to DBPs in Guangzhou drinking water was predominantly caused by exposure to chloroform, accounting for 40.6 % of the TCR and 1.5-times higher than that in Beijing. In addition, the CR of exposure to DCAA in drinking water in both megacities accounted for a large proportion of the TCR for children aged 9 months to 2 years. Monte Carlo simulations showed that 62.2 % and 42.6 % of the TCR of simultaneous exposure to As and DBPs in drinking water exceeded the acceptable level for sensitive populations, that is, children aged 1-2 years in Beijing (95th percentile = 4.2 × 10-4) and children aged 9-12 months in Guangzhou (95th percentile = 5.2 × 10-4), respectively. This elaborate health risk assessment sheds light on improving the water quality indices to guarantee drinking water safety in China.

Impacts of hydraulic fracturing wastewater from oil and gas industries on drinking water: Quantification of 69 disinfection by-products and calculated toxicity

Oil and gas production generates large amounts of brine wastewater called "produced water" with various geogenic and synthetic contaminants. These brines are generally used in hydraulic fracturing operations to stimulate production. They are characterized by elevated halide levels, particularly geogenic bromide and iodide. Such salt concentrations in produced water may be as high as thousands of mg/L of bromide and tens of mg/L of iodide. Large volumes of produced water are stored, transported, reused in production operations, and ultimately disposed of by deep well injection into saline aquifers. Improper disposal may potentially contaminate shallow freshwater aquifers and impact drinking water sources. Because conventional produced water treatment typically does not remove halides, produced water contamination of groundwater aquifers may cause the formation of brominated and iodinated disinfection by-products (I-DBPs) at municipal water treatment plants. These compounds are of interest because of their higher toxicity relative to their chlorinated counterparts. This study reports a comprehensive analysis of 69 regulated and priority unregulated DBPs in simulated drinking waters fortified with 1 % (v/v) oil and gas wastewater. Impacted waters produced 1.3×-5× higher levels of total DBPs compared to river water after chlorination and chloramination. Individual DBP levels ranged from (<0.1-122 μg/L). Overall, chlorinated waters formed highest levels, including trihalomethanes that would exceed the U.S. EPA regulatory limit of 80 μg/L. Chloraminated waters had more I-DBP formation and highest levels of haloacetamides (23 μg/L) in impacted water. Calculated cytotoxicity and genotoxicity were higher for impacted waters treated with chlorine and chloramine than corresponding treated river waters. Chloraminated impacted waters had the highest calculated cytotoxicity, likely due to higher levels of more toxic I-DBPs and haloacetamides. These findings demonstrate that oil and gas wastewater if discharged to surface waters could adversely impact downstream drinking water supplies and potentially affect public health.

Removal and transformation of disinfection by-products in water during boiling treatment

Disinfection by-products (DBPs) remain an ongoing issue because of their widespread occurrence and toxicity. Boiling is the most popular household water treatment method and can effectively remove some DBPs. However, the transformation behavior of DBPs during boiling is still unclear, and the key contributors to toxicity have not been identified. In this study, the changes in the concentrations of DBPs in the single-DBP systems and the multi-DBP systems during boiling were monitored, and in-depth discussions on the removal and transformation of DBPs in both systems were carried out. The results showed that boiling was effective in removing volatile DBPs (over 90% for TCAL, TCAN, and DCAN, and over 60% for TCM), but ineffective for non-volatile DBPs (around 20% for TCAA and below 10% for DCAA and MCAA). By hydrolysis and decarboxylation, the transformation occurred among DBPs, i.e., 55% TCAL to TCM, followed by 23% DCAN to DCAA, 22% TCAN to TCAA, and 10% TCAA to TCM. The transformations were found to be significantly influenced by other co-existing DBPs. In multi-DBP systems, the transformations of DCAN to DCAA and TCAN to TCAA were both promoted, while the transformation of TCAN to TCAA was inhibited. Transformation and volatilization are the two processes responsible for DBP removal. Toxicity estimates indicated that boiling was effective in reducing the toxicity of DBPs and improving the safety of the water, despite the interconversion of DBPs in drinking water during boiling. This study emphasized the importance of studying the interconversion behaviors of DBPs in drinking water during boiling and provided practical information for end-use drinking water safety.

Enhanced selectivity for acidic contaminants in drinking water: From suspect screening to toxicity prediction

A novel analytical workflow for suspect screening of organic acidic contaminants in drinking water is presented, featuring selective extraction by silica-based strong anion-exchange solid-phase extraction, mixed-mode liquid chromatography-high resolution accurate mass spectrometry (LC-HRMS), peak detection, feature reduction and compound identification. The novel use of an ammonium bicarbonate-based elution solvent extended strong anion-exchange solid-phase extraction applicability to LC-HRMS of strong acids. This approach performed with consistently higher recovery and repeatability (88 ± 7 % at 500 ng L^-1), improved selectivity and lower matrix interference (mean = 12 %) over a generic mixed-mode weak anion exchange SPE method. In addition, a novel filter for reducing full-scan features from fulvic and humic acids was successfully introduced, reducing workload and potential for false positives. The workflow was then applied to 10 London municipal drinking water samples, revealing the presence of 22 confirmed and 37 tentatively identified substances. Several poorly investigated and potentially harmful compounds were found which included halogenated hydroxy-cyclopentene-diones and dibromomethanesulfonic acid. Some of these compounds have been reported as mutagenic in test systems and thus their presence here requires further investigation. Overall, this approach demonstrated that employing selective extraction improved detection and helped shortlist suspects and potentially toxic chemical contaminants with higher confidence.

Appraisal of machine learning techniques for predicting emerging disinfection byproducts in small water distribution networks

Monitoring emerging disinfection byproducts (DBPs) is challenging for many small water distribution networks (SWDNs), and machine learning-based predictive modeling could be an alternative solution. In this study, eleven machine learning techniques, including three multivariate linear regression-based, three regression tree-based, three neural networks-based, and two advanced non-parametric regression techniques, are used to develop models for predicting three emerging DBPs (dichloroacetonitrile, chloropicrin, and trichloropropanone) in SWDNs. Predictors of the models include commonly-measured water quality parameters and two conventional DBP groups. Sampling data of 141 cases were collected from eleven SWDNs in Canada, in which 70 % were randomly selected for model training and the rest were used for validation. The modeling process was reiterated 1000 times for each model. The results show that models developed using advanced regression techniques, including support vector regression and Gaussian process regression, exhibited the best prediction performance. Support vector regression models showed the highest prediction accuracy (R² =0.94) and stability for predicting dichloroacetonitrile and trichloropropanone, and Gaussian process regression models are optimal for predicting chloropicrin (R² =0.92). The difference is likely due to the much lower concentrations of chloropicrin than dichloroacetonitrile and trichloropropanone. Advanced non-parametric regression techniques, characterized by a probabilistic nature, were identified as most suitable for developing the predictive models, followed by neural network-based (e.g., generalized regression neural network), regression tree-based (e.g., random forest), and multivariate linear regression-based techniques. This study identifies promising machine learning techniques among many commonly-used alternatives for monitoring emerging DBPs in SWDNs under data constraints.

Haloacetonitrile stability in cell culture media used in vitro toxicological studies

Haloacetonitriles (HANs) are an emerging class of nitrogenous disinfection by-products (DBPs) formed in disinfected drinking water and have been reported to be more cyto- and genotoxic than the regulated DBPs. HANs are also known to hydrolyze under neutral pH and normal room temperature. However, the stability of HANs has not been well characterized in DBP toxicological assessments. Most toxicological assessments expose DBPs up to several days which may result in a mixture of HANs and degradation products that might have underestimated HAN toxicity. In this study, HANs stability was characterized in 1) a buffer solution in sealed vials, 2) cell culture media (CCM) in sealed vials, and 3) CCM in 96 sealed well plates with 5% CO₂. Solutions were incubated at 37 °C for 3 days. MonoHANs were found to be stable in buffer and CCM except when HANs were incubated in CCM in plates where they could possibly be affected by volatilization and photodegradation during sample handling. However, di- and tri- HANs degraded between 70 and 100% in both buffer solution and CCM. They were also found to be less stable in CCM than in buffer solution possibly from HANs reacting with nucleophiles present in CCM (i.e., amino acids). Identified degradation products include corresponding haloacetamides and haloacetic acids for buffer solutions and only haloacetic acids and an unknown brominated compound for CCM. Results of this study suggests that reported toxicity values might have been underestimated and should consider changing CCM and DBP on a daily basis for a more accurate toxicity measurement.

Identification of Toxicity Forcing Agents from Individual Aliphatic and Aromatic Disinfection Byproducts Formed in Drinking Water: Implications and Limitations

Recently, a study found that aromatic DBP fractions dominate the overall toxicity of chlorinated drinking water. However, key toxicity drivers have not been reported via comprehensive evaluation based on the formation of aliphatic and aromatic DBPs in drinking water. In this study, the occurrence of 37 aliphatic and 19 aromatic DBPs in drinking samples with different water characteristics collected in a Chinese megacity was explored. According to the individual DBP concentrations and cytotoxicity potencies as well as the "TIC-Tox" method, haloacetonitriles and halonitrophenols were found to be the toxicity drivers among the measured aliphatic and aromatic DBPs, respectively. However, when aromatic and aliphatic DBPs are taken into consideration together, aliphatic DBPs were calculated to present higher toxicity contribution than aromatic DBPs, which is inconsistent with the previous study. TOX showed significant positive correlations with most aliphatic DBPs but no aromatic DBPs, and the overall toxicity of the water sample concentrates is significantly related to the total calculated cytotoxicity and aliphatic DBPs, suggesting that current selected aromatic DBPs are insufficient to represent the overall aromatic DBPs. UV254 and DOC rather than SUVA are better surrogates for predicting DBP formation potential for DOM with a lower humification degree as indicated by fluorescence results.

Development of multi-residue gas chromatography coupled with mass spectrometry methodologies for the measurement of 15 chemically different disinfection by-products (DBPs) of emerging concern in drinking water from two different Portuguese water treatment plants

In water treatment plants (WTPs), chemical agents, such as chlorine and ozone, might react with organic matter and anthropogenic contaminants, forming a high diversity of disinfection by-products (DBPs). Due to the potential toxicological effects, the identification of unregulated DBPs (UR-DBPs) is critical to help water managers in the selection of effective water treatment processes, contributing to improving water safety plans. Given the limited validated analytical methods to detect UR-DBPs, here we developed new multi-residue gas chromatography coupled with mass spectrometry methodologies for the detection and quantification of 15 UR-DBPs, including aldehydes, haloketones (HKs), nitrosamines and alcohols, in drinking water matrices. Solid-phase extraction (SPE), for the nitrosamine group, and solid-phase micro extraction (SPME), for the remaining DBPs, were used as sample preparation methods. The developed methodologies allowed the quantification of target UR-DBPs at trace concentration levels (ng L^-1), with method quantification limits (MQLs) ranging from 14.4 ng L^-1 to 26.0 ng L^-1 (SPE-GC-MS) and 2.3 ng L^-1 and 1596 ng L^-1 (SPME-GC-MS). The methods were applied to different drinking water matrices, considering distinct delivery points of EPAL - Empresa Portuguesa das Águas Livres WTPs. Overall, the aldehyde group, represented by decanal, nonanal and 2-ethylheaxanal, showed the highest occurrence, followed by HKs and nitrosamines. The results of this study suggested that the formation of these UR-DBPs should be further monitored in WTPs.

Formation of Larger Molecular Weight Disinfection Byproducts from Acetaminophen in Chlorine Disinfection

Acetaminophen is widely used to treat mild to moderate pain and to reduce fever. Under the worldwide COVID-19 pandemic, this over-the-counter pain reliever and fever reducer has been drastically consumed, which makes it even more abundant than ever in municipal wastewater and drinking water sources. Chlorine is the most widely used oxidant in drinking water disinfection, and chlorination generally causes the degradation of organic compounds, including acetaminophen. In this study, a new reaction pathway in the chlorination of acetaminophen, i.e., oxidative coupling reactions via acetaminophen radicals, was investigated both experimentally and computationally. Using an ultraperformance liquid chromatograph coupled to an electrospray ionization-triple quadrupole mass spectrometer, we detected over 20 polymeric products in chlorinated acetaminophen samples, some of which have structures similar to the legacy pollutants "polychlorinated biphenyls". Both C-C and C-O bonding products were found, and the corresponding bonding processes and kinetics were revealed by quantum chemical calculations. Based on the product confirmation and intrinsic reaction coordinate computations, a pathway for the formation of the polymeric products in the chlorination of acetaminophen was proposed. This study suggests that chlorination may cause not only degradation but also upgradation of a phenolic compound or contaminant.

Occurrence of brominated disinfection by-products in thermal spas

Thermal spas are gaining more and more popularity among the population because they are used for recreational purposes. Disinfecting these baths without losing the health benefits poses a challenge for swimming pool operators. Previous studies have mainly focused on regulated chlorinated DBPs in freshwater pools with no bromide or seawater pools with very high bromide content. Thermal water pools have a low bromide content and in combination with chlorine can lead to chlorinated, brominated and mixed halogenated DBP species. The occurrence of brominated and mixed halogenated DBPs in these types of pools is largely unexplored, with very few or limited studies published on regulated DBPs and even fewer on emerging DBP classes. In the field of swimming pool water disinfection, apart from extensive studies in the field of drinking water disinfection, only a few studies are known in which >39 halogenated and 16 non-halogenated disinfection by-products, including regulated trihalomethanes (THM) and haloacetic acids (HAA), were investigated in swimming pool water. Calculated bromine incorporation factor (BIF) demonstrated that even small amounts of bromide in swimming pool water can lead to a large shift in DBP species towards brominated and mixed halogenated DBPs. Dihaloacetonitriles (DHANs) accounted for >50% of the calculated cytotoxicity and genotoxicity on average. Comparison of the target analysis with the TOX showed that a major part of the measured TOX (69% on average) could be explained by the regulated classes THMs, HAAs, and the unregulated class of HANs. This study aims to help operators of swimming pools with bromide-containing water to gain a better understanding of DBP formation in future monitoring and to fill the knowledge gap that has existed so far on the occurrence of DBPs in thermal water pools.

Assessing the skin irritation and sensitizing potential of concentrates of water chlorinated in the presence of iodinated X-ray contrast media

Chemical disinfection of water provides significant public health benefits. However, disinfectants like chlorine can react with naturally occurring materials in the water to form disinfection byproducts (DBPs). Natural levels of iodine have been reported to be too low in some source waters to account for the levels of iodinated DBPs detected. Iodinated X-ray contrast media (ICM) have been identified as a potential source of iodine. The toxicological impact of ICM present in source water at the time of disinfection has not been fully investigated. Iopamidol, iohexol, iopromide, and diatrizoate are among the ICM most frequently detected in water. In this study, source water containing one of these four ICM was chlorinated; non-chlorinated ICM-containing water samples served as controls. Reactions were conducted at an ICM concentration of 5 µM and a chlorine dose of 100 µM over 72 hr. Water concentrates (20,000-fold) were prepared by XAD-resin/ethyl acetate extraction and DMSO solvent exchange. We used the MatTek® reconstituted human epithelial skin irritation model to evaluate the water concentrates and also assessed the dermal irritation and sensitization potential of these concentrates using the LLNA:BrdU ELISA in BALB/c mice. None of the water concentrates tested (2500X) resulted in a skin irritant response in the MatTek® skin irritation model. Likewise, none of the concentrates (2500X, 1250X, 625X, 312.5X, 156.25X) produced a skin irritation response in mice: erythema was minimal; the maximum increase in ear thickness was less than 25%. Importantly, none of the concentrates produced a positive threshold response for allergic skin sensitization at any concentration tested in the LLNA:BrdU ELISA. We conclude that concentrates of water disinfected in the presence of four different ICM did not cause significant skin irritation or effects consistent with skin sensitization at the concentrations tested.

Formation potential and analysis of 32 regulated and unregulated disinfection by-products: Two new simplified methods

Water disinfection is an essential process that provides safe water by inactivating pathogens that cause waterborne diseases. However, disinfectants react with organic matter naturally present in water, leading to the formation of disinfection by-products (DBPs). Multi-analyte methods based on mass spectrometry (MS) are preferred to quantify multiple DBP classes at once however, most require extensive sample pre-treatment and significant resources. In this study, two analytical methods were developed for the quantification of 32 regulated and unregulated DBPs. A purge and trap (P&T) coupled with gas chromatography mass spectrometry (GC-MS) method was optimized that automated sample pre-treatment and analyzed volatile and semi-volatile compounds, including trihalomethanes (THMs), iodinated trihalomethanes (I-THMs), haloacetonitriles (HANs), haloketones (HKTs) and halonitromethanes (HNMs). LOQs were between 0.02-0.4 µg/L for most DBPs except for 8 analytes that were in the low µg/L range. A second method with liquid chromatography (LC) tandem mass spectrometry (MS/MS) was developed for the quantification of 10 haloacetic acids (HAAs) with a simple clean-up and direct injection. The LC-MS/MS direct injection method has the lowest detection limits reported (0.2-0.5 µg/L). Both methods have a simple sample pre-treatment, which make it possible for routine analysis. Hyperchlorination and uniform formation conditions (UFC) formation potential tests with chlorine were evaluated with water samples containing high and low TOC. Hyperchlorination formation potential test maximized THMs and HAAs while UFC maximized HANs. Ascorbic acid was found to be an appropriate quencher for both analytical methods. Disinfected drinking water from four water utilities in Alberta, Canada were also evaluated.

Are Disinfection Byproducts (DBPs) Formed in My Cup of Tea? Regulated, Priority, and Unknown DBPs

Globally, tea is the second most consumed nonalcoholic beverage next to drinking water and is an important pathway of disinfection byproduct (DBP) exposure. When boiled tap water is used to brew tea, residual chlorine can produce DBPs by the reaction of chlorine with tea compounds. In this study, 60 regulated and priority DBPs were measured in Twinings green tea, Earl Grey tea, and Lipton tea that was brewed using tap water or simulated tap water (nanopure water with chlorine). In many cases, measured DBP levels in tea were lower than in the tap water itself due to volatilization and sorption onto tea leaves. DBPs formed by the reaction of residual chlorine with tea precursors contributed ∼12% of total DBPs in real tap water brewed tea, with the remaining 88% introduced by the tap water itself. Of that 12%, dichloroacetic acid, trichloroacetic acid, and chloroform were the only contributing DBPs. Total organic halogen in tea nearly doubled relative to tap water, with 96% of the halogenated DBPs unknown. Much of this unknown total organic halogen (TOX) may be high-molecular-weight haloaromatic compounds, formed by the reaction of chlorine with polyphenols present in tea leaves. The identification of 15 haloaromatic DBPs using gas chromatography-high-resolution mass spectrometry indicates that this may be the case. Further studies on the identity and formation of these aromatic DBPs should be conducted since haloaromatic DBPs can have significant toxicity.

Analytical discovery of water disinfection byproducts of toxicological relevance: highlighting halobenzoquinones

Analytical advancement enables discoveries in water research, and challenges in the identification and determination of a wide range of trace level toxic compounds in water drives the development of new analytical platforms and tools. The identification of toxic disinfection byproducts (DBPs) in disinfected drinking water is an excellent example. Water disinfection is necessary to protect the public from waterborne disease. However, an unintentional consequence is the formation of DBPs resulting from reactions of disinfectants with natural organic matter in source water. To date, regulated DBPs do not account for the increased bladder cancer risk estimated in epidemiological studies. The majority of halogenated DBPs remain unidentified and the discovery of unknown DBPs of toxicological relevance continues to be a major focus of current water research. This review will highlight halobenzoquinones as a class of DBPs that serves as an example of analytical development and toxicological studies. We will feature recent trends and gaps in analytical technologies for identification of unknown DBPs and bioassays for evaluation of the toxicological effects of specific DBPs and their mixtures.

Nontargeted identification of chlorinated disinfection byproducts formed from natural organic matter using Orbitrap mass spectrometry and a halogen extraction code

Natural organic matter is a major source of precursors of hazardous chlorinated disinfection byproducts (Cl-DBPs) formed during water treatment, but the majority of Cl-DBPs are still unidentified. In this study, we used a self-written halogen extraction code to identify halogen isotopic patterns in combination with the R package MFAssignR, to identify Cl-DBPs from Orbitrap mass spectra. One hundred and eighty-nine Cl-DBPs were detected during chlorination of a Suwannee River natural organic matter solution, and the structures of 20 of these compounds are reported for the first time. Kendrick mass defect analysis and structural identification confirmed that chlorinated carboxylic acids are common and likely to form during chlorination. A toxicity prediction using quantitative structure-activity relationship models indicated that most of the chlorinated carboxylic acids may be highly toxic. Our analytical strategy can identify Cl-DBPs accurately from complex mixtures and may also be applicable to the identification of other halogenated disinfection byproducts formed during water treatment.

New methods based on back propagation (BP) and radial basis function (RBF) artificial neural networks (ANNs) for predicting the occurrence of haloketones in tap water

Haloketones (HKs) is one class of disinfection by-products (DBPs) which is genetically toxic and mutagenic. Monitoring HKs in drinking water is important for drinking water safety, yet it is a time-consuming and laborious job. Developing predictive models of HKs to estimate their occurrence in drinking water is a good alternative, but to date no study was available for HKs modeling. This study was to explore the feasibility of linear, log linear regression models, back propagation (BP) as well as radial basis function (RBF) artificial neural networks (ANNs) for predicting HKs occurrence (including dichloropropanone, trichloropropanone and total HKs) in real water supply systems. Results showed that the overall prediction ability of RBF and BP ANNs was better than linear/log linear models. Though the BP ANN showed excellent prediction performance in internal validation (N₂₅ = 98-100%, R² = 0.99-1.00), it could not well predict HKs occurrence in external validation (N₂₅ = 62-69%, R² = 0.202-0.848). Prediction ability of RBF ANN in external validation (N₂₅ = 85%, R² = 0.692-0.909) was quite good, which was comparable to that in internal validation (N₂₅ = 74-88%, R² = 0.799-0.870). These results demonstrated RBF ANN could well recognized the complex nonlinear relationship between HKs occurrence and the related water quality, and paved a new way for HKs prediction and monitoring in practice.

Developmental and neurobehavioral assessment of low-dose N-nitrosodimethylamine (NDMA) using zebrafish embryo bioassay

N-nitrosodimethylamine (NDMA) is one of the emerging nitrogenous disinfection by-products (DBPs) with probable cytotoxicity, genotoxicity, and carcinogenesis. Its potential toxicological effects have drawn considerable attention but remain inadequately known. Here two methods, including developmental toxicity evaluation and neurobehavioral toxicity evaluation, were used and compared to investigate the safety of low-dose (0, 0.1, 1, 10, 100 μg/L) NDMA exposure to embryo-larval stage of zebrafish. Results showed that the survival and malformation rate of larvae at 6-day post fertilization (dpf) and the hatching rates at 48-h post fertilization (hpf) and 72 hpf in treatment groups had no significant difference with the control group, indicating that the tested NDMA doses were not developmentally toxic. Differently, the changes of neurobehavioral indicators performed more sensitivity. For example, 100 μg/L NDMA exposure induced locomotor hyperactivity at 7 dpf and induced an increasing effect on the relative path angle value. Further, relative value of path angle had more consistency with locomotion results compared with absolute value, indicating that relative value of path angle may be more suitable for the safety evaluation of low-dose NDMA exposure. This work supported that zebrafish neurobehavioral test is a powerful tool in the safety assessment of low-dose NDMA exposure and also has the potential to evaluate the safety of other DBPs.

Cumulative health risk assessment of disinfection by-products in drinking water by different disinfection methods in typical regions of China

Disinfection was essential to keep human healthy from microorganisms in drinking water. Meanwhile, disinfection by-products (DBPs) have been proved to be associated with some adverse health effects. The DBP levels were different in drinking water disinfected by different methods and may cause diverse health risks. However, studies in this field and systematic analysis about risk characteristics are limited. We estimated the health risks of DBPs exposure in drinking water through multi-pathways, and systematically analyzed the characteristics of different disinfection methods and influence factors of health risk of DBPs in China. Drinking water samples were collected and analyzed for DBPs from some representative water treatment plants in several typical regions in China. We adopted the additive method to estimate the health risks of DBPs exposure in drinking water through multi-pathways, and used descriptive and hierarchical analysis to understand their characteristics and influence factors. The concentrations of the six DBPs in drinking water ranged from 1.6 μg/L to 13.3 μg/L. The cumulative cancer risk of DBPs exposure through multi-pathways was 8.63 × 10^-5. The total HI of DBPs exposure was 1.70 × 10^-1. The health risks of DBPs in drinking water disinfected by chlorine dioxide and sodium hypochlorite were lower than by other disinfection methods. The health risk of DBPs in drinking water was dominated by risk through oral and inhalation route. The health risks in wet season were higher than that in dry season. There is no significant difference in health risk for males and females, but children experienced higher health risks than adults. Our study suggested the situation of that a large population experienced the high cancer risk of DBPs in drinking water in typical regions of China. It was suggested that potential higher risk should be concerned, and possible measures could be considered to decrease the health risks.

A New Group of Heterocyclic Nitrogenous Disinfection Byproducts (DBPs) in Drinking Water: Role of Extraction pH in Unknown DBP Exploration

pH adjustment prior to extraction is an important step in water sample pretreatment processes for exploration of new/unknown disinfection byproducts (DBPs) in drinking water. To achieve a better extraction efficiency, the pH of a water sample is usually adjusted to a low level (e.g., < 0.5) to ensure that target DBPs are in their neutral forms. However, such a practice may elude some amphoteric DBPs (especially those nitrogenous DBPs with multiple functional groups), which can accept protons at a low pH and lose protons at a high pH. In this study, with careful extraction pH selection and optimization, we first report the detection and identification of a new group of heterocyclic nitrogenous DBPs, halogenated pyridinols, in simulated drinking water using ultra performance liquid chromatography/electrospray ionization-triple quadrupole mass spectrometry and time-of-flight mass spectrometry, including 5-chloro-3-pyridinol, 2-bromo-3-pyridinol, 2,6-dichloro-4-pyridinol, 2,6-dibromo-3-pyridinol, 3-bromo-2-chloro-5-pyridinol, 5-bromo-2-chloro-3-pyridinol, 3,5,6-trichloro-2-pyridinol, and 2,4,6-tribromo-3-pyridinol. On the basis of the speciation of dissociated chemical species and recovery tests at different extraction pH values, it was found that, only at a pH of 3.0, all the eight new DBPs could achieve recoveries of >50%. With subsequent instrumental parameter optimization, the method detection and quantitation limits of the eight new DBPs were determined to be 0.04-1.58 and 0.15-4.11 ng/L, respectively. The optimized method enabled an accurate detection of the eight new DBPs in two real drinking water samples. Further aided with in vivo developmental and acute toxicity assays using zebrafish embryos, the developmental and acute toxicity of the new DBPs were found to be slightly lower than those of halogenated benzoquinones but dozens of times higher than those of commonly known DBPs such as tribromomethane and iodoacetic acid.

Target, suspect and non-target screening analysis from wastewater treatment plant effluents to drinking water using collision cross section values as additional identification criterion

The anthropogenic entry of organic micropollutants into the aquatic environment leads to a potential risk for drinking water resources and the drinking water itself. Therefore, sensitive screening analysis methods are needed to monitor the raw and drinking water quality continuously. Non-target screening analysis has been shown to allow for a more comprehensive investigation of drinking water processes compared to target analysis alone. However, non-target screening is challenging due to the many features that can be detected. Thus, data processing techniques to reduce the high number of features are necessary, and prioritization techniques are important to find the features of interest for identification, as identification of unknown substances is challenging as well. In this study, a drinking water production process, where drinking water is supplied by a water reservoir, was investigated. Since the water reservoir provides surface water, which is anthropogenically influenced by wastewater treatment plant (WWTP) effluents, substances originating from WWTP effluents and reaching the drinking water were investigated, because this indicates that they cannot be removed by the drinking water production process. For this purpose, ultra-performance liquid chromatography coupled with an ion-mobility high-resolution mass spectrometer (UPLC-IM-HRMS) was used in a combined approach including target, suspect and non-target screening analysis to identify known and unknown substances. Additionally, the role of ion-mobility-derived collision cross sections (CCS) in identification is discussed. To that end, six samples (two WWTP effluent samples, a surface water sample that received the effluents, a raw water sample from a downstream water reservoir, a process sample and the drinking water) were analyzed. Positive findings for a total of 60 substances in at least one sample were obtained through quantitative screening. Sixty-five percent (15 out of 23) of the identified substances in the drinking water sample were pharmaceuticals and transformation products of pharmaceuticals. Using suspect screening, further 33 substances were tentatively identified in one or more samples, where for 19 of these substances, CCS values could be compared with CCS values from the literature, which supported the tentative identification. Eight substances were identified by reference standards. In the non-target screening, a total of ten features detected in all six samples were prioritized, whereby metoprolol acid/atenolol acid (a transformation product of the two β-blockers metoprolol and atenolol) and 1,3-benzothiazol-2-sulfonic acid (a transformation product of the vulcanization accelerator 2-mercaptobenzothiazole) were identified with reference standards. Overall, this study demonstrates the added value of a comprehensive water monitoring approach based on UPLC-IM-HRMS analysis.

Unraveling the chemodiversity of halogenated disinfection by-products formed during drinking water treatment using target and non-target screening tools

To date, there is no analytical approach available that allows the full identification and characterization of highly complex disinfection by-product (DBP) mixtures. This study aimed at investigating the chemodiversity of drinking water halogenated DBPs using diverse analytical tools: measurement of adsorbable organic halogen (AOX) and mass spectrometry (MS)-based target and non-target analytical workflows. Water was sampled before and after chemical disinfection (chlorine or chloramine) at four drinking water treatment plants in Sweden. The target analysis had the highest sensitivity, although it could only partially explain the AOX formed in the disinfected waters. Non-target Fourier transform ion cyclotron resonance (FT-ICR) MS analysis indicated that only up to 19 Cl and/or Br-CHO formulae were common to all disinfected waters. Unexpectedly, a high diversity of halogenated DBPs (presumed halogenated polyphenolic and highly unsaturated compounds) was found in chloraminated surface water, comparable to that found in chlorinated surface water. Overall, up to 86 DBPs (including isobaric species) were tentatively identified using liquid chromatography (LC)-Orbitrap MS. Although further work is needed to confirm their identity and assess their relevance in terms of toxicity, they can be used to design suspect lists to improve the characterization of disinfected water halogenated mixtures.

UV/ peroxymonosulfate process for degradation of chloral hydrate: Pathway and the role of radicals

In this study, kinetics, influencing factors and potential mechanisms involved in the degradation of chloral hydrate (CH) by UV/peroxymonosulfate (PMS) process were demonstrated. The degradation rate of CH could reach 89.6% by UV₂₅₄/PMS process, significantly exceeding UV₃₀₀/PMS (0.7%), UV₃₅₀/PMS (6.3%), UV₂₅₄ direct photolysis (9.0%) and PMS alone (0.0%) processes. CH degradation in UV₂₅₄/PMS system followed pseudo first-order degradation kinetics with an apparent rate constant of 0.186 min^-1, which was suppressed by Cl^- and HCO₃^-. The optimal pH for CH degradation was around 5.0. Direct mineralization accounted for the CH degradation in UV/PMS system. Interestingly, the addition of PMS at the neutral condition before UV irradiation transferred CH into trichloroacetic acid (TCAA). The transformation efficiency of CH into TCAA at 10 min was enhanced from 2.17%-40.38% with the elevation of initial pH from 7.0-8.0. The subsequent exposure of UV lamps ceased the transformation of CH into TCAA and facilitated the direct mineralization of CH, but it did not work in the refractory TCAA degradation. Finally, it was revealed that HO predominantly participated CH degradation in UV/PMS process, while O₂^- was responsible for the transformation of CH into TCAA by addition of PMS before UV irradiation.

Addition of lemon before boiling chlorinated tap water: A strategy to control halogenated disinfection byproducts

Chlorine disinfection is required to inactivate pathogens in drinking water, but it inevitably generates potentially toxic halogenated disinfection byproducts (halo-DBPs). A previous study has reported that the addition of ascorbate to tap water before boiling could significantly decrease the concentration of overall halo-DBPs in the boiled water. Since the fruit lemon is rich in vitamin C (i.e., ascorbic acid), adding it to tap water followed by heating and boiling in an effort to decrease levels of halo-DBPs was investigated in this study. We examined three approaches that produce lemon water: (i) adding lemon to tap water at room temperature, termed "Lemon"; (ii) adding lemon to boiled tap water (at 100 °C) and then cooling to room temperature, termed "Boiling + Lemon"; and (iii) adding lemon to tap water then boiling and cooling to room temperature, termed "Lemon + Boiling". The concentrations of total and individual halo-DBPs in the resultant water samples were quantified with high-performance liquid chromatography-tandem mass spectrometry and the cytotoxicity of DBP mixtures extracted from the water samples was evaluated using human epithelial colorectal adenocarcinoma Caco-2 cells and hepatoma HepG2 cells. Our results show that the "Lemon + Boiling" approach substantially decreased the concentrations of halo-DBPs and the cytotoxicity of tap water. This strategy could be applied to control halo-DBPs, as well as to lower the adverse health effects of halo-DBPs on humans through tap water ingestion.

New methods for identification of disinfection byproducts of toxicological relevance: Progress and future directions

Disinfection byproducts (DBPs) represent a ubiquitous source of chemical exposure in disinfected water. While over 700 DBPs have been identified, the drivers of toxicity remain poorly understood. Additionally, ever evolving water treatment practices have led to a continually growing list of DBPs. Advancement of analytical technologies have enabled the identification of new classes of DBPs and the quantification of these chemically diverse sets of DBPs. Here we summarize advances in new workflows for DBP analysis, including sample preparation, chromatographic separation with mass spectrometry (MS) detection, and data processing. To aid in the selection of techniques for future studies, we discuss necessary considerations for each step in the strategy. This review focuses on how each step of a workflow can be optimized to capture diverse classes of DBPs within a single method. Additionally, we highlight new MS-based approaches that can be powerful for identifying novel DBPs of toxicological relevance. We discuss current challenges and provide perspectives on future research directions with respect to studying new DBPs of toxicological relevance. As analytical technologies continue to advance, new strategies will be increasingly used to analyze complex DBPs produced in different treatment processes with the aim to identify potential drivers of toxicity.

Low chlorine impurity might be beneficial in chlorine dioxide disinfection

Chlorine dioxide (ClO₂) is a prevalently used disinfectant alternative to chlorine, due to its effectiveness in pathogen inactivation and low yields of organic halogenated disinfection byproducts (DBPs). However, during ClO₂ generation, chlorine is inevitably introduced into the obtained ClO₂ solution as an "impurity", which could compromise the merits of ClO₂ disinfection. In this study, drinking water disinfection with ClO₂ containing 0‒25% chlorine impurity (i.e., at Cl₂ to ClO₂ mass ratios of 0‒25%) was simulated, and the effect of chlorine impurity on the DBP formation and developmental toxicity of the finished water was evaluated. With increasing the chlorine impurity in ClO₂, the chlorite level kept decreasing and the chlorate level gradually increased; meanwhile, an unexpected trend from decline to rise was observed for the total organic halogenated DBPs, with the minimum level appearing at 5% chlorine impurity. To unravel the mechanisms for the variations of organic halogenated DBPs with chlorine impurity, a quantitative kinetic model was developed to simulate the formation of chlorinated, brominated, and iodinated DBPs in the ClO₂-disinfected drinking water. The modeling results indicated that reactions involving iodide accounted for the decrease of organic halogenated DBPs at a relatively low chlorine impurity level. In accordance with DBP formation, ClO₂ with 5% chlorine impurity generated less toxic drinking water than pure ClO₂, while significantly higher developmental toxicity was induced until the chlorine impurity reached 25%. For E. coli inactivation, the presence of chlorine impurity enhanced the disinfection efficiency due to a synergistic effect of ClO₂ and chlorine. Therefore, disinfection practices with ClO₂ containing low chlorine impurity (e.g., <10%) might be favored (i.e., there is no need to eliminate low chlorine impurity in the ClO₂ solution), while those containing high chlorine impurity should be concerned.

Haloacetonitriles and haloacetamides precursors in filter backwash and sedimentation sludge water during drinking water treatment

Haloacetonitriles (HANs) and haloacetamides (HAMs) are nitrogenous disinfection byproducts that are present in filter backwash water (FBW) and sedimentation sludge water (SSW). In many cases FBW and SSW are recycled to the head of drinking water treatment plants. HAN and HAM concentrations in FBW and SSW, without additional oxidants, ranged from 6.8 to 11.6 nM and 2.9 to 3.6 nM of three HANs and four HAMs, respectively. Upon oxidant addition to FBW and SSW under formation potential conditions, concentrations for six HANs and six HAMs ranged from 92.2 to 190.4 nM and 42.2 to 95.5 nM, respectively. Therefore, at common FBW and SSW recycle rates (2 to 10% of treated water flows), the precursor levels in these recycle waters should not be ignored because they are comparable to levels present in finished water. Brominated HAN and chlorinated HAM were the dominant species in FBW and SSW, respectively. The lowest molecular weight ultrafiltration fraction (< 3 kDa) contributed the most to HAN and HAM formations. The hydrophilic (HPI) organic fraction contributed the greatest to HAN precursors in sand-FBW and SSW and were the most reactive HAM precursors in both sand- or carbon-FBWs. Fluorescence revealed that aromatic protein-like compounds were dominant HAN and HAM precursors. Therefore, strategies that remove low molecular weight hydrophilic organic matter and aromatic protein-like compounds will minimize HAN and HAM formations in recycled FBW and SSW.

The identification of halogenated disinfection by-products in tap water using liquid chromatography-high resolution mass spectrometry

In this paper, a comprehensive method for the identification of the unknown halogenated DBPs (X-DBPs, X = Cl, Br, and I) in the tap water of Wuhan, China via liquid chromatography-high resolution mass spectrometry (LC-HRMS) was developed. 123 X-DBPs were identified through the stepwise procedure, 94 of them were newly identified, and 3 of them were confirmed by standards. Most X-DBPs were aliphatic compounds and highly unsaturated and phenolic compounds, some X-DBPs contained multiple halogen atoms and rich in carboxyl groups, such as C₂H₂O₂BrCl, C₂H₂O₂Br₂, and C₂H₂O₂ClI. It was worth noting that the concentration of some X-DBPs had the same trend with time. Most Cl-DBPs remained stable and I-DBPs were detected occasionally by monitoring the change of concentration of these X-DPBs with the time during three consecutive months. The results demonstrate that the proposed method could provide valuable molecular formula and structure information on unknown multiple halogenated DBPs, or be used for the identification of other multiple halogenated organic compounds in different media.

The occurrence, characteristics, transformation and control of aromatic disinfection by-products: A review

With the development of analytical technology, more emerging disinfection by-products (DBPs) have been identified and detected. Among them, aromatic DBPs, especially heterocyclic DBPs, possess relatively high toxicity compared with regulated DBPs, which has been proved by bioassays. Thus, the occurrence of aromatic DBPs is of great concern. This article provides a comprehensive review and summary of the characteristics, occurrence, transformation pathways and control of aromatic DBPs. Aromatic DBPs are frequently detected in drinking water, wastewater and swimming pool water, among which swimming pool water illustrates highest concentration. Considering the relatively high concentration and toxicity, halophenylacetonitriles (HPANs) and halonitrophenols (HNPs) are more likely to be toxicity driver among frequently detected phenyl DBPs. Aromatic DBPs can be viewed as important intermediate products of dissolved organic matter (DOM) during chlor(am)ination. High molecular weight DOM could convert to aromatic DBPs via direct or indirect pathways, and they can further decompose into regulated aliphatic DBPs such as trihalomethanes (THMs) and haloacetic acids (HAAs) by ring opening and side chain cleavage. Even though no single DBPs control strategy is efficient to all aromatic DBPs, the decrease of overall toxicity may be achieved by several methods including absorption, solar radiation and boiling. By systematically considering aromatic DBPs and aliphatic DBPs, a better trade-off can be made to reduce health risk induced by DBPs.

Effects of ascorbate and carbonate on the conversion and developmental toxicity of halogenated disinfection byproducts during boiling of tap water

Chlorine disinfection inactivates pathogens in drinking water, but meanwhile it causes the formation of halogenated disinfection byproducts (DBPs), which may induce adverse health effects. Humans are unavoidably exposed to halogenated DBPs via tap water ingestion. Boiling of tap water has been found to significantly reduce the concentrations of halogenated DBPs. In this study, we found that compared with boiling only, adding ascorbate (vitamin C) or carbonate (baking soda) to tap water and then boiling the water further reduced the level of total organic halogen (a collective parameter for all halogenated DBPs) by up to 36% or 28%, respectively. Adding ascorbate removed the chlorine residual in tap water and thus prevented the formation of more halogenated DBPs in the boiling process. Adding carbonate elevated pH of tap water and consequently enhanced the hydrolysis (dehalogenation) of halogenated DBPs or led to the formation of more trihalomethanes that might volatilize to air during the boiling process. The comparative developmental toxicity of the DBP mixtures in the water samples was also evaluated. The results showed that adding a tiny amount of sodium ascorbate or carbonate (2.5-5.0 mg/L) to tap water followed by boiling for 5 min reduced the developmental toxicity of tap water to a substantially lower level than boiling only. The addition of sodium ascorbate or carbonate to tap water in household could be realized by preparing them in tiny pills. This study suggests simple and effective methods to reduce the adverse effects of halogenated DBPs on humans through tap water ingestion.

Progress in the pretreatment and analysis of N-nitrosamines: an update since 2010

As highly toxic substances, N-nitrosamines (NAs) have been proved to cause carcinogenesis and mutagenesis in humans. Therefore, to carefully monitor safety and preserve human health, the development of rapid, accurate, and high-sensitivity determination methods of NAs is of substantial importance. This review provides a current-status comprehensive summary of the pretreatment and determination methods of NAs in various samples since 2010. Common pretreatment methods that have been used to extract and purify targets include solid-phase extraction, liquid-liquid extraction and various microextraction methods, such as solid-phase microextraction and liquid-phase microextraction, among others. Determination methods include liquid chromatography, gas chromatography, supercritical fluid chromatography and electrochemical methods, among others. In addition, we discuss and compare the advantages and disadvantages of various pretreatment and analytical methods and examine the prospects in this area.

Comparative Quantitative Toxicology and QSAR Modeling of the Haloacetonitriles: Forcing Agents of Water Disinfection Byproduct Toxicity

The haloacetonitriles (HANs) is an emerging class of nitrogenous-disinfection byproducts (N-DBPs) present in disinfected drinking, recycled, processed wastewaters, and reuse waters. HANs were identified as primary forcing agents that accounted for DBP-associated toxicity. We evaluated the toxic characteristics of iodoacetonitrile (IAN), bromoacetonitrile (BAN), dibromoacetonitrile (DBAN), bromochloroacetonitrile (BCAN), tribromoacetonitrile (TBAN), chloroacetonitrile (CAN), dichloroacetonitrile (DCAN), trichloroacetonitrile (TCAN), bromodichloroacetonitrile (BDCAN), and chlorodibromoacetonitrile (CDBAN). This research generated the first quantitative, comparative analyses on the mammalian cell cytotoxicity, genotoxicity and thiol reactivity of these HANs. The descending rank order for HAN cytotoxicity was TBAN ≈ DBAN > BAN ≈ IAN > BCAN ≈ CDBAN > BDCAN > DCAN ≈ CAN ≈ TCAN. The rank order for genotoxicity was IAN ≈ TBAN ≈ DBAN > BAN > CDBAN ≈ BDCAN ≈ BCAN ≈ CAN ≈ TCAN ≈ DCAN. The rank order for thiol reactivity was TBAN > BDCAN ≈ CDBAN > DBAN > BCAN > BAN ≈ IAN > TCAN. These toxicity metrics were associated with membrane permeability and chemical reactivity. Based on their physiochemical parameters and toxicity metrics, we developed optimized, robust quantitative structure activity relationship (QSAR) models for cytotoxicity and for genotoxicity. These models can predict cytotoxicity and genotoxicity of novel HANs prior to analytical biological evaluation.

A review on the 40th anniversary of the first regulation of drinking water disinfection by-products

Water disinfection, primarily by chlorination, is one of the greatest achievements of public health. However, more than half a century after its introduction, studies in the 1970s reported that (a) chlorine interacted with organic matter in the water to form disinfection by-products (DBPs); (b) two DBPs, chloroform and bromoform, both trihalomethanes (THMs), were rodent carcinogens; (c) three brominated THMs were mutagenic; in six studies chlorinated drinking waters in the United States and Canada were mutagenic; and (d) in one epidemiological study there was an association between bladder cancer mortality and THM exposure. This led the U.S. Environmental Protection Agency to issue its first DBP regulation in 1979. Forty years later, >600 DBPs have been characterized, 20/22 have been shown to be rodent carcinogens, >100 have been shown to be genotoxic, and 1000s of water samples have been found to be mutagenic. Data support a hypothesis that long-term dermal/inhalation exposure to certain levels of the three brominated THMs, as well as oral exposure to the haloacetic acids, combined with a specific genotype may increase the risk for bladder cancer for a small but significant population group. Improved water-treatment methods and stricter regulations have likely reduced such risks over the years, and further reductions in potential risk are anticipated with the application of advanced water-treatment methods and wider application of drinking water regulations. This 40-year research effort is a remarkable example of sustained cooperation between academic and government scientists, along with public/private water companies, to find answers to a pressing public health question.

Radial basis function artificial neural network able to accurately predict disinfection by-product levels in tap water: Taking haloacetic acids as a case study

Control of risks caused by disinfection by-products (DBPs) requires pre-knowledge of their levels in drinking water. In this study, a radial basis function (RBF) artificial neural network (ANN) was proposed to predict the concentrations of haloacetic acids (HAAs, one dominant class of DBPs) in actual distribution systems. To train and verify the RBF ANN, a total of 64 samples taken from a typical region (Jinhua region) in China were characterized in terms of water characteristics (dissolved organic carbon (DOC), ultraviolet absorbance at 254 nm (UVA₂₅₄), NO₂^--N level, NH₄⁺-N level, Br^- and pH), temperature and the prevalent HAAs concentrations. Compared with multiple linear/log linear regression (MLR) models, predictions done by RBF ANNs showed rather higher regression coefficients and accuracies, indicating the high capability of RBF ANNs to depict complicated and non-linear relationships between HAAs formation and various factors. Meanwhile, it was found that, predictions of HAAs formation done by RBF ANNs were efficient and allowed to further improve the prediction accuracy. This is the first study to systematically explore feasibility of RBF ANNs in prediction of DBPs. Accurate predictions by RBF ANNs provided great potential application of DBPs monitoring in actual distribution system.

Review of the environmental prenatal exposome and its relationship to maternal and fetal health

Environmental chemicals comprise a major portion of the human exposome, with some shown to impact the health of susceptible populations, including pregnant women and developing fetuses. The placenta and cord blood serve as important biological windows into the maternal and fetal environments. In this article we review how environmental chemicals (defined here to include man-made chemicals [e.g., flame retardants, pesticides/herbicides, per- and polyfluoroalkyl substances], toxins, metals, and other xenobiotic compounds) contribute to the prenatal exposome and highlight future directions to advance this research field. Our findings from a survey of recent literature indicate the need to better understand the breadth of environmental chemicals that reach the placenta and cord blood, as well as the linkages between prenatal exposures, mechanisms of toxicity, and subsequent health outcomes. Research efforts tailored towards addressing these needs will provide a more comprehensive understanding of how environmental chemicals impact maternal and fetal health.

Expanding phytoremediation to the realms of known and unknown organic chemicals of concern

Recent advancements in analytical chemistry and data analyses via high-resolution mass spectrometry (HRMS) are evolving scientific understanding of the potential totality of organic chemical exposure and pollutant risk. This review addresses the importance of HRMS approaches, namely suspect screening and nontarget chemical analyses, to the realm of phytoremediation. These analytical approaches are not without caveats and constraints, but they provide an opportunity to understand in greater totality how plant-based technologies contribute, mitigate, and reduce organic chemical exposure across scales of experimental and system-level studies. These analytical tools can enlighten the complexity and efficacy of plant-contaminant system design and expand our understanding of biogenic and anthropogenic chemicals at work in phytoremediation systems. Advances in data analytics from biological sciences, such as metabolomics, are crucial to HRMS analysis. This review provides an overview of targeted, suspect screening, and nontarget HRMS approaches, summarizes the expanding knowledge of regulated and unregulated organic chemicals in the environment, addresses requisite HRMS instrumentation, analysis cost, uncertainty, and data processing techniques, and offers potential bridges of HRMS analyses to phytoremediation research and application.

Formation of Iodinated Disinfection Byproducts (I-DBPs) in Drinking Water: Emerging Concerns and Current Issues

Formation of iodinated disinfection byproducts (I-DBPs) in drinking water has become an emerging concern. Compared to chlorine- and bromine-containing DBPs, I-DBPs are more toxic, have different precursors and formation mechanisms, and are unregulated. In this Account, we focus on recent research in the formation of known and unknown I-DBPs in drinking water. We present the state-of-the-art understanding of known I-DBPs for the six groups reported to date, including iodinated methanes, acids, acetamides, acetonitriles, acetaldehyde, and phenols. I-DBP concentrations in drinking water generally range from ng L^-1 to low-μg L^-1. The toxicological effects of I-DBPs are summarized and compared with those of chlorinated and brominated DBPs. I-DBPs are almost always more cytotoxic and genotoxic than their chlorinated and brominated analogues. Iodoacetic acid is the most genotoxic of all DBPs studied to date, and diiodoacetamide and iodoacetamide are the most cytotoxic. We discuss I-DBP formation mechanisms during oxidation, disinfection, and distribution of drinking water, focusing on inorganic and organic iodine sources, oxidation kinetics of iodide, and formation pathways. Naturally occurring iodide, iodate, and iodinated organic compounds are regarded as important sources of I-DBPs. The apparent second-order rate constant and half-lives for oxidation of iodide or hypoiodous acid by various oxidants are highly variable, which is a key factor governing the iodine fate during drinking water treatment. In distribution systems, residual iodide and disinfectants can participate in reactions involving heterogeneous chemical oxidation, reduction, adsorption, and catalysis, which may eventually affect I-DBP levels in finished drinking water. The identification of unknown I-DBPs and total organic iodine analysis is also summarized in this Account, which provides a more complete picture of I-DBP formation in drinking water. As organic DBP precursors are difficult to completely remove during the drinking water treatment process, the removal of iodide provides a cost-effective solution for the control of I-DBP formation. This Account not only serves as a reference for future epidemiological studies to better assess human health risks due to exposure to I-DBPs in drinking water but also helps drinking water utilities, researchers, regulators, and the general public understand the formed species, levels, and formation mechanisms of I-DBPs in drinking water.