Influence of biofilm on the transport and deposition behaviors of nano- and micro-plastic particles in quartz sand

Colonization characteristics and surface effects of microplastic biofilms: Implications for environmental behavior of typical pollutants

This paper summarizes the colonization dynamics of biofilms on microplastics (MPs) surfaces in aquatic environments, encompassing bacterial characteristics, environmental factors affecting biofilm formation, and matrix types and characteristics. The interaction between biofilm and MPs was also discussed. Through summarizing recent literatures, it was found that MPs surfaces offer numerous benefits to microorganisms, including nutrient enrichment and enhanced resistance to environmental stress. Biofilm colonization changes the surface physical and chemical properties as well as the transport behavior of MPs. At the same time, biofilms also play an important role in the fragmentation and degradation of MPs. In addition, we also investigated the coexistence level, adsorption mechanism, enrichment, and transformation of MPs by environmental pollutants mediated by biofilms. Moreover, an interesting aspect about the colonization of biofilms was discussed. Biofilm colonization not only had a great effect on the accumulation of heavy metals by MPs, but also affects the interaction between particles and environmental pollutants, thereby changing their toxic effects and increasing the difficulty of MPs treatment. Consequently, further attention and research are warranted to delve into the internal mechanisms, environmental risks, and the control of the coexistence of MPs and biofilms.

Transport of polyethylene and polypropylene microplastics under the action of agricultural chemicals: Role of pesticide adjuvants and neonicotinoid active ingredients

Understanding the impact of various agricultural chemical components on the fate and transport of microplastics (MPs) in the subsurface is essential. In this study, column experiments on saturated porous media were conducted to explore the influence of the coexistence environment of pesticide adjuvants (surfactants) and active ingredients (neonicotinoids) on the transport of polyethylene (PE) and polypropylene (PP) MPs. An anionic surfactant (sodium dodecyl sulfate (SDS)), a nonionic surfactant (nonylphenol ethoxylate (NP-40)), and three neonicotinoid insecticides (acetamiprid, dinotefuran, and nitenpyram) could independently increase MP migration by 9.31%-61.01% by improving the hydrophilicity. Acetamiprid or dinotefuran reduced the adhesion work of the binary system by competing with SDS for adsorption sites, thereby inhibiting PE mobility. However, nitenpyram in the mixture was not easily adsorbed on the surface of PE MPs together with SDS because of nitenpyram's high hydrophilicity. Neonicotinoid molecules could not reduce the hydrophilic modification of SDS on PP MPs by competing for adsorption sites. Owing to their weak charge and adhesion work of nonionic surfactants (-4.80 mV and 28.45 kT for PE and -8.21 mV and 17.64 kT for PP), neonicotinoids tended to occupy the adsorption sites originally belonging to NP-40. The long molecular chain of NP-40 made it difficult for high-concentration neonicotinoids to affect the adhesion on MPs. In addition, NP-40 was harder to peel off from the MP surface than SDS, leading to a larger MP transport ability in the sand column.

Comparative study of polystyrene microplastic transport behavior in three different filter media: Quartz sand, zeolite, and anthracite

Microplastics (MPs) are emerging contaminants that are attracting increasing interest from researchers, and the safety of drinking water is greatly affected by their transportation during filtration. Polystyrene (PS) was selected as a representative MPs, and three filter media (quartz sand, zeolite, and anthracite) commonly found in water plants were used. The retention patterns of PS-MPs by various filter media under various background water quality conditions were methodically investigated with the aid of DLVO theory and colloidal filtration theory. The results show that the different structures and elemental compositions of the three filter media cause them to exhibit different surface roughnesses and surface potentials. A greater surface roughness of the filter media can provide more deposition sites for PS-MPs, and the greater surface roughness of zeolite and anthracite significantly enhances their ability to inhibit the migration of PS-MPs compared with that of quartz sand. However, surface roughness is not the only factor affecting the migration of MPs. The lower absolute value of the surface potential of anthracite causes the DLVO energy between it and PS-MPs to be significantly lower than that between zeolite and PS-MPs, which results in stronger retention of PS-MPs by anthracite, which has a lower surface roughness, than zeolite, which has a higher surface roughness. The transport of PS-MPs in the medium is affected by the combination of the surface roughness of the filter media and the DLVO energy. Under the same operating conditions, the retention efficiencies of the three filter materials for PS-MPs followed the order of quartz sand < zeolite < anthracite. Additionally, the conditions of the solution markedly influenced the transport ability of PS-MPs within the simulated filter column. The transport PS-MPs in the simulated filter column decreased with increasing solution ionic strength and cation valence. Naturally, dissolved organic matter promoted the transfer of PS-MPs in the filter layer, and humic acid had a much stronger facilitating impact than fulvic acid. The study findings might offer helpful insight for improving the ability of filter units ability to retain MPs.

Material-specific binding peptides empower sustainable innovations in plant health, biocatalysis, medicine and microplastic quantification

Material-binding peptides (MBPs) have emerged as a diverse and innovation-enabling class of peptides in applications such as plant-/human health, immobilization of catalysts, bioactive coatings, accelerated polymer degradation and analytics for micro-/nanoplastics quantification. Progress has been fuelled by recent advancements in protein engineering methodologies and advances in computational and analytical methodologies, which allow the design of, for instance, material-specific MBPs with fine-tuned binding strength for numerous demands in material science applications. A genetic or chemical conjugation of second (biological, chemical or physical property-changing) functionality to MBPs empowers the design of advanced (hybrid) materials, bioactive coatings and analytical tools. In this review, we provide a comprehensive overview comprising naturally occurring MBPs and their function in nature, binding properties of short man-made MBPs (<20 amino acids) mainly obtained from phage-display libraries, and medium-sized binding peptides (20-100 amino acids) that have been reported to bind to metals, polymers or other industrially produced materials. The goal of this review is to provide an in-depth understanding of molecular interactions between materials and material-specific binding peptides, and thereby empower the use of MBPs in material science applications. Protein engineering methodologies and selected examples to tailor MBPs toward applications in agriculture with a focus on plant health, biocatalysis, medicine and environmental monitoring serve as examples of the transformative power of MBPs for various industrial applications. An emphasis will be given to MBPs' role in detecting and quantifying microplastics in high throughput, distinguishing microplastics from other environmental particles, and thereby assisting to close an analytical gap in food safety and monitoring of environmental plastic pollution. In essence, this review aims to provide an overview among researchers from diverse disciplines in respect to material-(specific) binding of MBPs, protein engineering methodologies to tailor their properties to application demands, re-engineering for material science applications using MBPs, and thereby inspire researchers to employ MBPs in their research.

Cotransport of nanoplastics and plastic additive bisphenol AF (BPAF) in unsaturated hyporheic zone: Coupling effects of surface functionalization and protein corona

The ecological risk of combined pollution from microplastics (MPs) and associated contaminants usually depends on their interactions and environmental behavior, which was also disturbed by varying surface modifications of MPs. In this study, the significance of surface functionalization and protein-corona on the cotransport of nanoplastics (NPs; 100 nm) and the related additive bisphenol AF (BPAF) was examined in simulated unsaturated hyporheic zone (quartz sand; 250-425 μm). The electronegative bovine serum albumin (BSA) and electropositive trypsin were chosen as representative proteins, while pristine (PNPs), amino-modified (ANPs), and carboxyl-modified NPs (CNPs) were representative NPs with different charges. The presence of BPAF inhibited the mobility of PNPs/CNPs, but enhanced the release of ANPs in hyporheic zone, which was mainly related to their hydrophobicity changes and electrostatic interactions. Meanwhile, the NPs with high mobility and strong affinity to BPAF became effective carriers, promoting the cotransport of BPAF by 16.4 %-26.4 %. The formation of protein-coronas altered the mobility of NPs alone and their cotransport with BPAF, exhibiting a coupling effect with functional groups. BSA-corona promoted the transport of PNPs/CNPs, but this promoting effect was weakened by the presence of BPAF via increasing particle aggregation and hydrophobicity. Inversely, trypsin-corona aggravated the deposition of PNPs/CNPs, but competition deposition sites and increased energy barrier caused by coexisting BPAF reversed this effect, facilitating the cotransport of trypsin-PNPs/CNPs in hyporheic zone. However, BPAF and protein-coronas synergistically promoted the mobility of ANPs, owing to competition deposition sites and decreased electrostatic attraction. Although all of the NPs with two protein-coronas reduced dissolved BPAF in the effluents via providing deposition sites, the cotransport of total BPAF was improved by the NPs with high mobility (BSA-PNPs/CNPs) or high affinity to BPAF (BSA/trypsin-ANPs). However, the trypsin-PNPs/CNPs inhibited the transport of BPAF due to their weak mobility and adsorption with BPAF. The results provide new insights into the role of varying surface modifications on NPs in the vertical cotransport of NPs and associated contaminants in unsaturated hyporheic zone.

Microplastics/nanoplastics in porous media: Key factors controlling their transport and retention behaviors

Till now, microplastics/nano-plastics(M/NPs) have received a lot of attention as emerging contaminant. As a typical but complex porous medium, soil is not only a large reservoir of M/NPs but also a gateway for M/NPs to enter groundwater. Therefore, the review of the factors controlling the transport behavior of M/NPs in porous media can provide important guidance for the risk assessment of M/NPs in soil and groundwater. In this study, the key factors controlling the transport behavior of M/NPs in porous media are systematically divided into three groups: (1) nature of M/NPs affecting M/NPs transport in porous media, (2) nature of flow affecting M/NPs transport in porous media, (3) nature of porous media affecting M/NPs transport. In each group, the specific control factors for M/NPs transport in porous media are discussed in detail. In addition to the above factors, some substances (colloids or pollutants) present in natural porous media (such as soil or sediments) will co-transport with M/NPs and affect its mobility. According to the different properties of co-transported substances, the mechanism of promoting or inhibiting the migration behavior of M/NPs in porous media was discussed. Finally, the limitations and future research directions of M/NPs transport in porous media are pointed out. This review can provide a useful reference for predicting the transport of M/NPs in natural porous media.

Decreased transport of nano- and micro-plastics in the presence of low-molecular-weight organic acids in saturated quartz sand

Low-molecular-weight organic acids (LMWOAs) and nano- and micro-plastics (NPs and MPs) are both widely distributed in terrestrial systems. To better understand the influence of LMWOAs on the transport of NPs and MPs, the effects of 0.5 mM citric- (CA), malic- (MA), and tartaric- (TA) acid on the transport of nano- (0.51 μm, PS NPs) and micro- (1.1 μm, PS MPs) polystyrene particles (2 mg L-1) in saturated quartz sand were investigated. All three LMWOAs decreased the transport of PS NPs and MPs, regardless of ionic composition or strength (0.1-10 mM NaCl and 0.1-1 mM CaCl2). Further investigation revealed that the interfacial interactions between PS-quartz sand surfaces and PS-PS were altered by LMWOAs. LMWOAs adsorbed to quartz sand surfaces could serve as new deposition sites, as evidenced by the decreased transport of PS NPs and MPs in quartz sand that was subjected to pre-equilibration with selected MA, the low inhibition of PS transport with low concentrations of LMWOAs (0.1 mM), and also the adsorption of LMWOAs onto quartz sand surfaces by batch experiments. Meanwhile, the adsorption of LMWOAs on PS, hydrodynamic measurement and visual TEM observation together clarified the slight aggregation of PS NPs and MPs in suspensions, inducing the subsequent decrease in transport. Among them, the adsorption of LMWOAs onto quartz sand surfaces was found to be the main factor dominating the decreased transport of both PS NPs and MPs in saturated quartz sand.

Transport and release behaviors of PFOA in saturated and unsaturated porous media with biochar amendment

The widespread usage of perfluorooctanoic acid (PFOA) in daily consumer products and its high mobility in porous media have resulted in ubiquitous contamination of PFOA in the natural environment. Developing techniques to immobilize and inhibit the transport of PFOA thus is critical to reduce its potential risks. In present study, biochar, one type of environmental-friendly material produced from cellulose, was utilized in porous media to test its addition on inhibiting the transport and release of PFOA before and after aging process. We found that although PFOA had high mobility in saturated/unsaturated porous media, biochar addition could significantly inhibit PFOA transport in porous media with different saturations due to its high adsorption capacity towards PFOA. The inhibited transport of PFOA by biochar also held true in solution with copresence of natural organic matter and in actual river water. Moreover, we found that negligible PFOA was released from porous media with biochar amendment even after exposure to freeze-thaw/dry-wet treatment. PFOA adsorbed onto biochar could be completely desorbed and the biochar could be reused for subsequent cycles after desorption. Clearly, amendment of porous media with biochar would be a feasible and cost-effective method to immobilize PFOA in natural environment and reduce its environmental risks.

Molecular docking and metagenomics assisted mitigation of microplastic pollution

Microplastics, tiny, flimsy, and direct progenitors of principal and subsidiary plastics, cause environmental degradation in aquatic and terrestrial entities. Contamination concerns include irrevocable impacts, potential cytotoxicity, and negative health effects on mortals. The detection, recovery, and degradation strategies of these pollutants in various biota and ecosystems, as well as their impact on plants, animals, and humans, have been a topic of significant interest. But the natural environment is infested with several types of plastics, all having different chemical makeup, structure, shape, and origin. Plastic trash acts as a substrate for microbial growth, creating biofilms on the plastisphere surface. This colonizing microbial diversity can be glimpsed with meta-genomics, a culture-independent approach. Owing to its comprehensive description of microbial communities, genealogical evidence on unconventional biocatalysts or enzymes, genomic correlations, evolutionary profile, and function, it is being touted as one of the promising tools in identifying novel enzymes for the degradation of polymers. Additionally, computational tools such as molecular docking can predict the binding of these novel enzymes to the polymer substrate, which can be validated through in vitro conditions for its environmentally feasible applications. This review mainly deals with the exploration of metagenomics along with computational tools to provide a clearer perspective into the microbial potential in the biodegradation of microplastics. The computational tools due to their polymathic nature will be quintessential in identifying the enzyme structure, binding affinities of the prospective enzymes to the substrates, and foretelling of degradation pathways involved which can be quite instrumental in the furtherance of the plastic degradation studies.

Adsorption performance of nanoplastics in carbon filtration column

Nanoplastics (NPs) are usually formed by the decomposition of large plastics, which will cause water pollution after entering the water body. Carbon filter column is used to adsorb and remove polystyrene nanoparticles (PSNPs). The influence of experimental conditions on adsorption was investigated and fitted by kinetic model. The results show that increasing the height of carbon filter column and decreasing the initial concentration of PSNPs and water flow rate can prolong the breakthrough time of carbon filter column. When the initial concentration of PSNPs is 0.8 mg L-1, the influent flow rate is 4 mL min-1 and the height of carbon filter bed is 8.5 cm, the removal effect is the best, and the depletion point of carbon filter column is extended to 48 h. Adams-Bohart model is suitable for describing the initial stage of adsorption. Thomas and Yoon-Nelson models can well describe the whole dynamic adsorption process of PSNPs, and Yoon-Nelson model can accurately predict the time required for 50% PSNPs to penetrate the carbon column. The adsorption mechanism of NPs by carbon filter column is mainly through the attachment sites and pore retention provided by particles on the surface of activated carbon. This study can provide new technical and theoretical support for the removal of NPs.

Microbial community structure and co-occurrence network stability in seawater and microplastic biofilms under prometryn pollution in marine ecosystems

Prometryn has been extensively detected in marine environment because of its widespread usage in agriculture and aquaculture and has been concerns since its serious effects on aquatic organisms. However, its impact on the microbial community in the marine ecosystem including seawater and biofilm is still unclear. Therefore, a short-term indoor microcosm experiment of prometryn exposure was conducted. This study found that prometryn had a more significant impact on the structure and stability of the microbial community in seawater compared to microplastic biofilms. Additionally, we observed that the assembly of the microbial community in biofilms was more affected by stochastic processes than in seawater under the exposure of prometryn. Our study provided evidence for the increasing impact of the microbial communities under the stress of prometryn and microplastics.

Microplastics in soils: Production, behavior process, impact on soil organisms, and related toxicity mechanisms

In recent years, microplastics (MPs) pollution has become a hot ecological issue of global concern and MP pollution in soil is becoming increasingly serious. Studies have shown that MPs have adverse effects on soil biology and ecological functions. Although MPs are evident in soils, identifying their source, abundance, and types is difficult because of the complexity and variability of soil components. In addition, the effects of MPs on soil physicochemical properties (PCP), including direct effects such as direct interaction with soil particles and indirect effects such as the impact on soil organisms, have not been reported in a differentiated manner. Furthermore, at present, the soil ecological effects of MPs are mostly based on biological toxicity reports of their exudate or size effects, whereas the impact of their surface-specific properties (such as environmentally persistent free radicals, surface functional groups, charge, and curvature) on soil ecological functions is not fully understood. Considering this, this paper reviews the latest research findings on the production and behavioral processes of MPs in soil, the effects on soil PCP, the impacts on different soil organisms, and the related toxic mechanisms. The above discussion will enhance further understanding of the behavioral characteristics and risks of MPs in soil ecosystems and provide some theoretical basis for further clarification of the molecular mechanisms of the effects of MPs on soil organisms.

Photo-oxidation of Micro- and Nanoplastics: Physical, Chemical, and Biological Effects in Environments

Micro- and nanoplastics (MNPs) are attracting increasing attention due to their persistence and potential ecological risks. This review critically summarizes the effects of photo-oxidation on the physical, chemical, and biological behaviors of MNPs in aquatic and terrestrial environments. The core of this paper explores how photo-oxidation-induced surface property changes in MNPs affect their adsorption toward contaminants, the stability and mobility of MNPs in water and porous media, as well as the transport of pollutants such as organic pollutants (OPs) and heavy metals (HMs). It then reviews the photochemical processes of MNPs with coexisting constituents, highlighting critical factors affecting the photo-oxidation of MNPs, and the contribution of MNPs to the phototransformation of other contaminants. The distinct biological effects and mechanism of aged MNPs are pointed out, in terms of the toxicity to aquatic organisms, biofilm formation, planktonic microbial growth, and soil and sediment microbial community and function. Furthermore, the research gaps and perspectives are put forward, regarding the underlying interaction mechanisms of MNPs with coexisting natural constituents and pollutants under photo-oxidation conditions, the combined effects of photo-oxidation and natural constituents on the fate of MNPs, and the microbiological effect of photoaged MNPs, especially the biotransformation of pollutants.

Insight into Impact of Phosphate on the Cotransport and Corelease of Eu(III) with Bentonite Colloids in Saturated Quartz Columns

Understanding the fate and transport of radionuclides in porous media reduces the risk of contaminating soils and groundwater systems. While the cotransport of bentonite colloids (BC) with radionuclides in saturated media is well documented, the role of phosphate (P) in the colloid-driven transport of radionuclides in saturated porous media is still unaddressed; in particular, phosphate increases the mobilities of radionuclides in porous media, which should be subjected to an environmental risk assessment and model construction. In this work, the effects of phosphate on the transport and release of Eu(III) in different colloid systems (P-Eu(III), P-BC, P-BC-Eu(III)) was investigated with a fundamental colloid chemistry approach and a range of characterization techniques. The results showed that intrinsic europium colloids with size of 685 nm were formed by precipitation with phosphate, which affected the mobility of Eu(III) due to colloid stability and physical straining. Phosphate enhanced BC and BC-Eu(III) transport, and a high phosphate concentration promoted BC transport by eliminating physical straining and enhancing the electrostatic repulsions. The crystal structure of EuPO4 was not destroyed by the subsequent introduction of BC, which carried EuPO4 for further migration. However, when phosphate, bentonite and Eu(III) coexisted in a colloid suspension, the phosphate promoted Eu(III) transport by preferentially interacting with the BC to form ternary BC-P-Eu(III) pseudo-colloids rather than forming the intrinsic EuPO4 colloids. The synergetic role of P and BC on Eu(III) transport involved a relatively complex process and was not a simply additive effect. The findings in this work highlight the significance of phosphate in controlling the fate and transport of Ln(III)/Am(III) radionuclides in the presence of intrinsic colloids and pseudo-colloids in P-rich colloid-bearing environments.

Nano- and micro-plastic transport in soil and groundwater environments: Sources, behaviors, theories, and models

With the increasing use of plastics, nano- and micro-plastic (NMP) pollution has become a hot topic in the scientific community. Ubiquitous NMPs, as emerging contaminants, are becoming a global issue owing to their persistence and potential toxicity. Compared with studies of marine and freshwater environments, investigations into the sources, transport properties, and fate of NMPs in soil and groundwater environments remain at a primary stage. Hence, the promotion of such research is critically important. Here, we integrate existing information and recent advancements to compile a comprehensive evaluation of the sources and transport properties of NMPs in soil and groundwater environments. We first provide a systematic description of the various sources and transport behaviors of NMPs. We then discuss the theories (e.g., clean-bed filtration and Derjaguin-Landau-Verwey-Overbeek theories) and models (e.g., single-site and dual-site kinetic retention and transport models) of NMP transport through saturated porous media. Finally, we outline the potential limitations of current research and suggest directions for future research. Overall, this review intends to assimilate and outline current knowledge and provide a useful reference frame to determine the sources and transport properties of NMPs in soil and groundwater environments.

Micro- and nanoplastics in soil: Linking sources to damage on soil ecosystem services in life cycle assessment

Soil ecosystems are crucial for providing vital ecosystem services (ES), and are increasingly pressured by the intensification and expansion of human activities, leading to potentially harmful consequences for their related ES provision. Micro- and nanoplastics (MNPs), associated with releases from various human activities, have become prevalent in various soil ecosystems and pose a global threat. Life Cycle Assessment (LCA), a tool for evaluating environmental performance of product and technology life cycles, has yet to adequately include MNPs-related damage to soil ES, owing to factors like uncertainties in MNPs environmental fate and ecotoxicological effects, and characterizing related damage on soil species loss, functional diversity, and ES. This study aims to address this gap by providing as a first step an overview of the current understanding of MNPs in soil ecosystems and proposing a conceptual approach to link MNPs impacts to soil ES damage. We find that MNPs pervade soil ecosystems worldwide, introduced through various pathways, including wastewater discharge, urban runoff, atmospheric deposition, and degradation of larger plastic debris. MNPs can inflict a range of ecotoxicity effects on soil species, including physical harm, chemical toxicity, and pollutants bioaccumulation. Methods to translate these impacts into damage on ES are under development and typically focus on discrete, yet not fully integrated aspects along the impact-to-damage pathway. We propose a conceptual framework for linking different MNPs effects on soil organisms to damage on soil species loss, functional diversity loss and loss of ES, and elaborate on each link. Proposed underlying approaches include the Threshold Indicator Taxa Analysis (TITAN) for translating ecotoxicological effects associated with MNPs into quantitative measures of soil species diversity damage; trait-based approaches for linking soil species loss to functional diversity loss; and ecological networks and Bayesian Belief Networks for linking functional diversity loss to soil ES damage. With the proposed conceptual framework, our study constitutes a starting point for including the characterization of MNPs-related damage on soil ES in LCA.

Limited effects of different real groundwaters from three coastal cities in China on the transport of low-concentration nanoplastics in quartz sand

Nanoplastics (NPs) have been widely detected in soil-groundwater systems. However, to date, the effect of real groundwater on the fate and transport of NPs has been poorly understood. In this study, the transport and retention behaviors of both polystyrene and poly(lactic-co-glycolic acid) NPs (PS NPs and PLGA NPs) in different real groundwaters from three coastal cities in China were explored using column experiments. PS (0.51 and 1.1 μm) and PLGA (1 μm) NPs with a low concentration of 2 mg L-1 were employed. Close observation showed that the transport of PS NPs was much higher than PLGA NPs in different groundwaters, with an average breakthrough curve plateau (C/Co) of ∼0.81 for PS NPs and ∼0.19 for PLGA NPs, respectively. As observed for PLGA, the plastic shape- and size-induced straining may be the reason for the minimal transport. Interestingly, we found that although the physicochemical characteristics of different real groundwaters varied significantly, the transport of certain NPs in real groundwater was similar with negligible differences. Closer inspection indicated that similar pHs of different groundwaters may be the reason contributing to these findings. Further investigation revealed that the transport behaviors of PS and PLGA NPs in real groundwater did not follow the classical DLVO theory. These findings suggest that the fate and transport of NPs in real soil-groundwater systems are much more comprehensive than the prediction based on DLVO theory and need intensive investigation.

Surface functional groups and biofilm formation on microplastics: Environmental implications

Microplastics (MPs) contamination is becoming a significant environmental issue, as the widespread omnipresence of MPs can cause many adverse consequences for both ecological systems and humans. Contrary to what is commonly thought, the toxicity-inducing MPs are not the original pristine plastics; rather, they are completely transformed through various surface functional groups and aggressive biofilm formation on MPs via aging or weathering processes. Therefore, understanding the impacts of MPs' surface functional groups and biofilm formation on biogeochemical processes, such as environmental fate, transport, and toxicity, is crucial. In this review, we present a comprehensive summary of the distinctive impact that surface functional groups and biofilm formation of MPs have on their significant biogeochemical behavior in various environmental media, as well as their toxicity and biological effects. We place emphasis on the role of surface functional groups and biofilm formation as a means of influencing the biogeochemical processes of MPs. This includes their effects on pollutant fate and element cycling, which in turn impacts the aggregation, transport, and toxicity of MPs. Ultimately, future research studies and tactics are needed to improve our understanding of the biogeochemical processes that are influenced by the surface functional groups and biofilm formation of MPs.

Combined effects of bacteria and antibiotics on surface properties and transport of nanoplastics in porous media

Currently, research on the individual effects of bacteria and antibiotics on the transport of nanoplastics (NPs) in porous media is in its infancy, while research on their combined effect is absent. It is well known that bacteria and antibiotics also interact with each other, so this synergistic transport of bacteria, antibiotics, and NPs in porous media must be very interesting. For exploring this aspect, we investigated the individual and combined effects of bacteria and antibiotics on the transport of polystyrene NPs (PS-NPs) in saturated porous media. Hydrophobicity, roughness, and the Derjaguin-Landau-Verwey-Overbeek (DLVO) interaction energy were measured and calculated. The PS-NPs' transport in porous media was fitted using a mathematical model. Enhanced roughness and size of PS-NPs with increased bacterial concentration dominated and inhibited the PS-NPs' transport in porous media, although the hydrophilicity of PS-NPs and the energy barrier between PS-NPs and porous media were also increased. An increase in antibiotic concentration reduced the energy barrier between PS-NPs and porous media, thereby decreasing the PS-NPs' transport. Combined effects of bacteria and antibiotics on the PS-NPs' transport were complex and distinct from individual effects, but the mechanisms were clear. Roughness and hydrophilicity of PS-NPs and the DLVO interaction energy between PS-NPs and porous media together influenced this process. In the presence of bacteria, antibiotics could alter the bacterial surface roughness by altering bacterial extracellular polymeric substances, and thus alter the PS-NPs' surface roughness, thereby affecting the PS-NPs' transport in porous media. When antibiotics were present, enhanced bacterial concentration increased the PS-NPs' hydrophilicity and the energy barrier between PS-NPs and porous media, thus promoting the PS-NPs' transport. The findings of this study provided a theoretical basis for clarifying the transport of NPs in porous media under complex environments, facilitating a reduction in environmental pollution of NPs.

Interaction between microplastic biofilm formation and antibiotics: Effect of microplastic biofilm and its driving mechanisms on antibiotic resistance gene

As two pollutants with similar transport pathways, microplastics (MPs) and antibiotics (ATs) inevitably co-exist in water environments, and their interaction has become a topic of intense research interest for scholars over the past few years. This paper comprehensively and systematically reviews the current interaction between MPs and ATs, in particular, the role played by biofilm developed MPs (microplastic biofilm). A summary of the formation process of microplastic biofilm and its unique microbial community structure is presented in the paper. The formation of microplastic biofilm can enhance the adsorption mechanisms of ATs on primary MPs. Moreover, microplastic biofilm system is a diverse and vast reservoir of genetic material, and this paper reviews the mechanisms by which microplastics with biofilm drive the production of antibiotic resistance genes (ARGs) and the processes that selectively enrich for more ARGs. Meanwhile, the enrichment of ARGs may lead to the development of microbial resistance and the gradual loss of the antimicrobial effect of ATs. The transfer pathways of ARGs affected by microplastic biofilm are outlined, and ARGs dependent transfer of antibiotic resistance bacteria (ARB) is mainly through horizontal gene transfer (HGT). Furthermore, the ecological implications of the interaction between microplastic biofilm and ATs and perspectives for future research are reviewed. This review contributes to a new insight into the aquatic ecological environmental risks and the fate of contaminants (MPs, ATs), and is of great significance for controlling the combined pollution of these two pollutants.

Exposure pathways, environmental processes and risks of micro (nano) plastics to crops and feasible control strategies in agricultural regions

Micro/nanoplastics (MPs/NPs) pollution may adversely impact agricultural ecosystems, threatening the sustainability and security of agricultural production. This drives an urgent need to comprehensively understand the environmental behavior and effects of MPs/NPs in soil and atmosphere in agricultural regions, and to seek relevant pollution prevention strategies. The rhizosphere and phyllosphere are the interfaces where crops are exposed to MPs/NPs. The environmental behavior of MPs/NPs in soil and atmosphere, especially in the rhizosphere and phyllosphere, determines their plant accessibility, bioavailability and ecotoxicity. This article comprehensively reviews the transformation and migration of MPs/NPs in soil, transportation and deposition in the atmosphere, environmental behavior and effects in the rhizosphere and phyllosphere, and plant uptake and transportation pathways. The article also summarizes the key factors controlling MPs/NPs environmental processes, including their properties, biotic and abiotic factors. Based on the sources, environmental processes and intake risks of MPs/NPs in agroecosystems, the article offers several feasible pollution prevention and risk management options. Finally, the review highlights the need for further research on MPs/NPs in agro-systems, including developing quantitative detection methods, exploring transformation and migration patterns in-situ soil, monitoring long-term field experiments, and establishing pollution prevention and control systems. This review can assist in improving our understanding of the biogeochemistry behavior of MPs/NPs in the soil-plant-atmosphere system and provide a roadmap for future research.

The contribution of deeper layers in slow sand filters to pathogens removal

Slow Sand Filtration is popular in drinking water treatment for the removal of a wide range of contaminants (e.g., particles, organic matter, and microorganisms). The Schmutzdecke in slow sand filters (SSFs) is known to be essential for pathogen removal, however, this layer is also responsible for increased head loss. Since the role of deeper layers in bacteria and virus removal is poorly understood, this research investigated the removal of E.coli WR1 and PhiX 174 at different depths of a full-scale SSF. Filter material from top (0-5 cm), middle (5-20 cm) and deep (20-35 cm) layers of an established filter was used in an innovative experimental set-up to differentiate physical-chemical and biological removal processes. In the analysis, we distinguished between removal by biological activity, biofilm and just sand. In addition, we modelled processes by a one-side kinetic model. The different layers contributed substantially to overall log removal of E.coli WR1 (1.4-1.7 log₁₀) and PhiX 174 (0.4-0.6 log₁₀). For E.coli WR1, biological activity caused major removal, followed by removal within biofilm and sand, whereas, removal of PhiX 174 mainly occurred within sand, followed by biofilm and biological activity. Narrow pore radii in the top layer obtained by micro-computed tomography scanner suggested enhanced retention of bacteria due to constrained transport. The retention rates of E.coli WR1 and PhiX 174 in top layer were four and five times higher than deeper layers, respectively (k_ret 1.09 min^-1 vs 0.26 min^-1 for E.coli WR1 and k_ret 0.32 min^-1 vs of 0.06 min^-1 for PhiX 174). While this higher rate was restricted to the Schmutzdecke alone (top 5 cm), the deeper layers extend to around 1 m in full-scale filters. Therefore, the contribution of deeper layers of established SSFs to the overall log removal of bacteria and viruses is much more substantial than the Schmutzdecke.

Abandoned disposable masks become hot substrates for plastisphere, whether in soil, atmosphere or water

A large number of surgical masks (SMs) to be discarded indiscriminately during the spread of COVID-19. The relationship between the changes of masks entering the environment and the succession of the microorganisms on them is not yet clear. The natural aging process of SMs in different environments (water, soil, and atmosphere) was simulated, the changes and succession of the microbial community on SMs with aging time were explored. The results showed that the SMs in water environment had the highest aging degree, followed by atmospheric environment, and SMs in soil had the lowest aging degree. The results of high-throughput sequencing demonstrated the load capacity of SMs for microorganisms, showed the important role of environment in determining microbial species on SMs. According to the relative abundance of microorganisms, it is found that compared with the water environment, the microbial community on SMs in water is dominated by rare species. While in soil, in addition to rare species, there are a lot of swinging strains on the SMs. Uncovering the ageing of SMs in the environment and its association with the colonization of microorganisms will help us understand the potential of microorganisms, especially pathogenic bacteria, to survive and migrate on SMs.

Effects of neonicotinoid insecticides on transport of non-degradable agricultural film microplastics

Mulch film microplastics (MPs) could act as a vector for agricultural chemicals due to their long-term presence in farmland environments. As a result, this study focuses on the adsorption mechanism of three neonicotinoids on two typical agricultural film MPs, polyethylene (PE) and polypropylene (PP), as well as the effects of neonicotinoids on the MPs transport in quartz sand saturated porous media. The findings revealed that the adsorption of neonicotinoids on PE and PP was a combination of physical and chemical processes, including hydrophobic, electrostatic and hydrogen bonding. Acidity and appropriate ionic strength (IS) were favorable conditions for neonicotinoid adsorption of on MPs. The results of column experiments showed that the presence of neonicotinoids, particularly at low concentrations (0.5 mmol L^-1), could promote the transport of PE and PP in the column by improving the electrostatic interaction and hydrophilic repulsion of particles. The neonicotinoids would be adsorbed on MPs through hydrophobic action preferentially, whereas excessive neonicotinoids could cover the hydrophilic functional groups on the surface of MPs. Neonicotinoids reduced the response of PE and PP transport behavior to pH changes. 0.005 mol L^-1 NaCl ameliorated the migration of MPs by increasing their stability. Because of its highest hydration ability and the bridging effect of Mg²⁺, Na⁺ had the most prominent transport promoting effect on PE and PP in MPs-neonicotinoid. This study shows that the increased environmental risk caused by the coexistence of microplastic particles and agricultural chemicals is unneglectable.

Dual role of pulmonary surfactant corona in modulating carbon nanotube toxicity and benzo[a]pyrene bioaccessibility

Inhaled carbon nanotubes (CNTs) can deposit in the deep lung, where they interact with pulmonary surfactant (PS) to form coronas, potentially altering the fate and toxicity profile of CNTs. However, the presence of other contaminants in combination with CNTs may affect these interactions. Here, we used passive dosing and fluorescence-based techniques confirm the partial solubilization of BaPs adsorbed on CNTs by PS in simulated alveolar fluid. MD simulations were performed to elucidate the competition of interactions between BaPs, CNTs, and PS. We found that PS play two opposing roles in altering the toxicity profile of the CNTs. First, the formation of PS coronas reduce CNTs' toxicity by decreasing the hydrophobicity of the CNTs and decreasing their aspect ratio. Second, the interaction with PS increases the bioaccessibility of BaP through interactions with PS, which may exacerbate the inhalation toxicity of CNTs. These findings suggest that the inhalation toxicity of PS-modified CNTs should consider the bioaccessibility of coexisting contaminants, with the CNT size and aggregation state playing an important role.

Co-transport of degradable microplastics with Cd(Ⅱ) in saturated porous media: Synergistic effects of strong adsorption affinity and high mobility

With the utilization of degradable plastics in the agricultural film and packaging industries, degradable microplastics (MPs) with strong mobility distributed in the underground environment may serve as carriers for heavy metals. It is essential to explore the interaction of (aged) degradable MPs with Cd(Ⅱ). The adsorption and co-transport behavior of different types of (aged) MPs (polylactic acid (PLA), polyvinyl chloride (PVC)) with Cd(Ⅱ) were investigated through batch adsorption experiments and column experiments under different conditions, respectively. The adsorption results showed that the adsorptive capacity of (aged) PLA with O-functional groups, polarity, and more negative charges was stronger than that of PVC and aged PVC, which was attributed to the binding of (aged) PLA to Cd(Ⅱ) through complexation and electrostatic attraction. The co-transport results indicated that the promotion of Cd(Ⅱ) transport by MPs followed the order of aged PLA > PLA > aged PVC > PVC. This facilitation was more pronounced under conditions of stronger transport of MPs and favorable attachment of Cd(Ⅱ) to MPs. Overall, the combination of strong adsorption affinity and high mobility helped (aged) PLA act as effective carriers for Cd(Ⅱ). The DLVO theory well explains the transport behavior of Cd(Ⅱ)-MPs. These findings provide new insights into the co-transport of degradable MPs and heavy metals in the subsurface environment.

Co-transport of polystyrene microplastics and kaolinite colloids in goethite-coated quartz sand: Joint effects of heteropolymerization and surface charge modification

This study investigated the transport behavior of polystyrene microplastics (MPs) in saturated quartz sand and goethite-coated sand in the presence of coexisting kaolinite colloids. Column experiments were conducted under a wide range of solution chemistry conditions, including pH levels of 6.0, 7.0, and 9.0, as well as background Na⁺ concentrations of 5 mM and 25 mM. We found that: (1) The individual transport of MPs in porous media diminished both with increasing background ion strength and decreasing pH, and its transport ability was significantly dominated by the interactions between MPs and porous media rather than the interplay between MPs, which has been further corroborated by the aggregation stability experiments of MPs particles. (2) MPs had a much lower ability to move through goethite-coated sand columns than quartz sand columns. This is because goethite coating reduces the repulsion energy barriers between porous media and MPs. The increased specific surface area and surface complexity of sand columns after goethite coating should also account for this difference. (3) MPs transport would be subjected to the differentiated impact of co-transported kaolinite colloids in the two types of porous media. The promotion effect of kaolinite colloid on MPs' transport capacity is not significantly affected by background ionic strength changes when quartz sand is served as the porous medium; however, the promotion effect is highly correlated with the background ionic strength when goethite-coated sand is served as the porous medium. In comparison with low background ionic strength conditions, kaolinite colloids under high background ionic strength conditions significantly facilitated MPs transport. This is mainly because under high background ionic conditions, kaolinite colloids are more likely to be deposited on the surface of goethite-covered sand, competing with MPs for the limited deposition sites. The extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) theory is applicable to describe the transport behavior of MPs.

Influence of flagella and their property on the initial attachment behaviors of bacteria onto plastics

Flagella and their property would influence the initial attachment of bacteria onto plastics, yet their impacts have not been investigated. In present study, four types of E. coli with or without flagella as well as with normal or sticky flagella were utilized to investigate the effects of flagella and their property on the initial attachment behaviors of bacteria onto six types of plastics in freshwater systems. We found that E. coli with flagella exhibited better initial attachment performance onto all six types of plastics than strain without flagella. Flagella could help bacteria swim near to plastics, pierce the energy barrier, and subsequently attach onto plastics. With stronger adhesive force, sticky flagella could further facilitate bacterial attachment onto plastics. Moreover, flagella especially sticky flagella could help bacteria form more rigid attachment layer on plastics. Even with humic acid in suspensions or in river water, flagellar E. coli showed greater attachment onto plastics than E. coli without flagella. Humic acid might adsorb onto sticky flagella and thus decreased the attachment of bacteria with sticky flagella onto plastics. Obviously, flagella as well as their property would impact the initial attachment of bacteria onto plastics and the subsequent formation of plastisphere in freshwater.

Effects of biofilms on the retention and transport of PFOA in saturated porous media

Understanding the fate and transport of perfluorooctanoic acid (PFOA) in soil and groundwater is essential to reliable assessments of its risks. This study investigated the impacts of Gram-positive Bacillus subtilis (BS), Gram-negative Pseudomonas aeruginosa (PA) and wild microbiota (WM) biofilm on the transport of PFOA in saturated sand columns at two ionic strengths (i.e., 1.0 and 20.0 mM NaCl). The retention of PFOA in biofilm-coated sand columns was higher than that in uncoated sand columns, due to biofilm-induced reinforced hydrophobic interactions and surface roughness, and decreased zeta potential. However, the retention effects varied among biofilm bacterial species with PFOA retardation factors in PA, WM and BS columns of 1.29-1.38, 1.21-1.29 and 1.11-1.15, respectively. Notably, PA biofilm had the most pronounced effect on PFOA retention. While increasing ionic strength promoted the retention of PFOA in BS biofilm-coated sand, it had no significant impact on PFOA transport in PA and WM biofilm-coated sand. This could be attributed to the differences in biofilm composition, deviating the ionic strengths effects on electrostatic double layer compression. The advection dispersion equation coupled with two-site kinetic retention model well described the transport of PFOA in all saturated columns. Our findings reveal that biofilm plays important roles in PFOA transport in porous media, instructive for risk assessment and remediation of PFOA contamination.

Transport behavior of nanoplastics in activated carbon column

Nanoplastics can be produced directly from some artificial products, such as cosmetics, or indirectly from the breakup of large pieces of plastic waste. They have a small particle size, large specific surface area, and stable structure and can concentrate toxic compounds in water. The discharge of nanoplastics into the water environment through urban piping systems or surface runoff may lead to the contamination of surface water resources, which poses a great threat to the safety of drinking water. As a common adsorbent, granular activated carbon (GAC) is widely used in the advanced treatment of drinking water. However, most of the studies focused on the transport ability of nanoplastics in quartz sand, and there is a lack of research on the migration behavior of nanoplastics in activated carbon media. In this study, the stability and pore characteristics of GAC were studied, and its regeneration efficiency was investigated. The transport curves of PSNPs, which have a particle size of 98 ± 9 nm and specific surface area of about 67 m²/g, were compared under different ionic strengths, ionic species, flow rates, pH, and humic acid (HA) concentrations. And DLVO theory was used to analyze the transport behavior of nanoplastics in activated carbon column. All experiments were performed at room temperature to make the results generalizable. The results showed that GAC had stable pore structure and excellent adsorption capacity. The surface area and pore volume of GAC are 759 m²/g and 0.357 cm³/g, respectively. And the regeneration rate of GAC can reach 90% and 83.3% after the first two regeneration cycles. On the other hand, at high ionic strength and low pH, the repulsive barrier between PSNPs and activated carbon gradually disappeared; then, more PSNPs were deposited in the activated carbon media, and the concentration of PSNPs in the effluent water was lower. Both the flow rate and HA promoted the transport of PSNPs, but the breakthrough curves of PSNPs did not change significantly when the HA concentration was further increased. At the same ion concentration, PSNPs tend to deposit on the surface of activated carbon in the background solution of Ca²⁺ compared with Na⁺. This study reveals the migration mechanism of PSNPs in the activated carbon filter column, which is of great importance to ensure the safety of drinking water and human health.

Microplastics removal and characteristics of a typical multi-combination and multi-stage constructed wetlands wastewater treatment plant in Changsha, China

Wastewater treatment plants (WWTPs) are an important source of microplastics (MPs) entering the aquatic environment. As environmental awareness increases, WWTPs are gradually using constructed wetlands (CWs) in the depth treatment stage. There were few studies related to MPs removal efficiency of CWs, especially in multi-stage and multi-combinations CWs. Therefore, we studied MPs characteristics and removal in a typical CWs WWTP in Changsha, comparing the MPs removal efficiencies of different processes in a WWTP, focusing on the MPs abundance variation in different stages CWs. Result showed that the MPs removal efficiency of Phase Ⅰ was 87.72% and that of Phase II was 80.65%. Approximate estimates showed that the daily discharge of MPs reached 7.20 * 10⁸ items. The MPs removal efficiency of vertical flow CWs was 25.71%. The MPs removal efficiencies of secondary and tertiary horizontal subsurface flow CWs (HSSFCWs) were 32.00% and 21.43%. The MPs removal efficiencies of secondary and tertiary surface flow CWs were 23.53% and 12.50%. The MPs removal efficiencies of three bio-ponds were -23.08%, -12.90%, and -27.27%. Combined system of bio-pond + CWs reduced the MPs removal efficiency. The most dominant shape of MPs in wastewater was fibers. The most common MPs were polyethylene and polystyrene. The primary treatment in the Changsha WWTP had the highest MPs removal efficiency. Results of this investigation showed the multi-combination and multi-stage CWs WWTP can remove most of MPs in influent, which greatly reduced the amount of MPs discharged into the aquatic environment through WWTP and provided data for analyzing the distribution of MPs in the aquatic environment.

Removal and toxic forecast of microplastics treated by electrocoagulation: Influence of dissolved organic matter

In recent years, the break of COVID-19 makes the large use of disposable products, which causes the removal of microplastics become an imperative problem. Electrocoagulation is one of the effective removal technologies, but there is hardly research concentrating on the effect of substrate in the actual water on the microplastics removal with electrocoagulation. As an important role of water bodies, dissolved organic matter (DOM) has a vital and inevitable effect on the efficiency of electrocoagulation. In this study, the effect of DOM in tailwater on microplastics during electrocoagulation is elucidated by comparing the electrocoagulation treatment results between simulated wastewater and tailwater, using parallel factor analysis (PARAFAC), Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectrometer (FTIR) and zeta potential analyzer. Three kinds of microplastic particles (i.e. polypropylene, polyethylene, and polymethyl methacrylate) were added into each of the two kinds of wastewaters to form six electrocoagulation systems. Results show that DOM in tailwater promotes the production of flocs and free radicals during electrocoagulation process. Fe²⁺ and Fe³⁺ are adsorbed on the surface of DOM molecules and combined with •OH form flocs. Although DOM accelerates the production of free radicals and thus promotes the aging of microplastics, flocs with DOM as crystal nucleus can prevent toxic substances and small-sized microplastics from leaching into water again. Therefore, electrocoagulation is preferred to removal microplastics in water with high concentration of DOM. This study provides a significant reference for microplastics removal by electrocoagulation in actual water, and promote the practical application of electrocoagulation for microplastics removal in water treatment.

Deposition of polystyrene microplastics on bare or biofilm-coated silica analysed via QCM-D

The mobility of microplastics (MPs) in aqueous media is closely related to their environmental risk. The naturally occurring silica substrate surface in the aquatic environment is easily colonized by microorganisms and forms a biofilm, which may affect the migration and distribution of MPs. Herein, a typical MP, polystyrene (PS), and Pseudomonas fluorescens (P. fluorescens) biofilms were selected to study the deposition and release of pristine or ultraviolet (UV)-aged PS MPs on silica and biofilms under different ionic strengths using a quartz crystal microbalance dissipation (QCM-D) system. Statistical analyses of the deposition experiments revealed a significant impact of P. fluorescens biofilms on deposition (p = 0.0042). The deposition rate of weathered MPs on the biofilms was 4.0 ± 0.1 to 16.3 ± 0.6 times that on silica. A release experiment revealed that the biofilm reduced the release fraction (f_r) of weathered MPs by 34.5 ± 0.3 % compared to bare silica. In addition, the UV-ageing treatment reduced the deposition mass of MPs on the surface of silica by 27.6 ± 0.21 % compared to pristine microspheres. The analysis of the deposition mechanism revealed that the promotion and inhibition of biofilm or UV-ageing treatment on the deposition of microspheres could be attributed to the non-Derjaguin-Landau-Verwey-Overbeek (DLVO) force and the decreased electrostatic repulsion or the increased hydration repulsion, respectively.

Vertical transport and retention behavior of polystyrene nanoplastics in simulated hyporheic zone

The ecological risk of microplastics (MPs) usually depends on their environmental behavior, however, few studies focused on the impact of hydrodynamic perturbations on the fate of MPs in hyporheic zone. This study chose quartz sand (250-425 μm) as simulated porous medium to investigate the transport of 100 nm polystyrene nanoplastics (PSNPs) under hydrodynamic factors, including flow rates (0.5, 1.0, and 2.0 mL/min), flow orientations (up-flow, down-flow, and horizontal-flow), and water saturations (50%, 80%, and 100%), as well as different salinities and temperatures. The breakthrough curves (BTCs) and retained profiles (RPs) of PSNPs were compared and analyzed by Derjaguin-Landau-Verwey-Overbeek (DLVO) theory. Due to the small size and moderate density of PSNPs, as well as high flow rates, the flow orientation exhibited little effect on the PSNP transport. However, high flow rate, low salinity, high water saturation, and low temperature would facilitate the mobility of PSNPs. The increase in salinity from zero to 35 PSU (practical salinity units) caused the compression of electrical double layer and weakened the electrostatic repulsion between PSNPs and sands, which dramatically decreased the penetration rate from 100% to zero. Especially, the lower energy barrier of PSNPs-PSNPs at 3.5 and 35 PSU (16.45 k_BT and zero, respectively) facilitated the adsorption of PSNPs on sand via ripening mechanism. Due to the strong adsorption of PSNPs by sand at high salinity, the effect of flow rate on PSNP transport was more pronounced at low salinity. The mobility of PSNPs at 0.035 PSU was enhanced by 41.4%-75.3% as the flow rate increased from 0.5 to 2.0 mL/min, which was contributed from the reversible deposition in lower secondary energy minimum depth at low salinity and the stronger hydrodynamic drag force generated by the high flow rate. However, the sufficient molecular diffusion at low flow rate promoted the occupation of PSNPs on adsorption sites. In addition, the penetration rate of PSNPs decreased by 25.0% as the water saturation decreased from 100% to 50%, indicating that the film straining at the air-water interface would hinder the transport of PSNPs. Finally, temperature increase impeded the penetration of PSNPs by 6.26%-23.1% via blocking mechanism. Our results suggest that low-salinity, high-flow river systems may be at greater risk of MPs contamination due to enhanced vertical transport capability.

A battery of baseline toxicity bioassays directed evaluation of plastic leachates-Towards the establishment of bioanalytical monitoring tools for plastics

There are increasing concerns regarding the ecological risks of plastics to the natural environment, especially the potential effects of plastic leachates on organisms, which contain various toxic components. However, appropriate methods to assess the overall environmental risks of plastics are limited. In this study, five different plastic products (three conventional and two biodegradable plastics) were immersed in simulated freshwater, and their toxicity was assessed using a battery of bioassays. We evaluated the effects of plastic leachates effects on organisms from four trophic levels of species (nematodes, Caenorhabditis elegans; algae, Scenedesmus obliquus; daphnids, Daphnia magna; and fish, Danio rerio) by measuring their acute and chronic toxicity. Our results indicated that all plastic leachates exhibited poor acute and chronic toxicity to the organisms. The acute toxicity of conventional plastic leachates with EC₂₀ values <1.6 g plastic/L was higher than that of the biodegradable polydioxanone (PPDO) leachate (EC₂₀: 16.2-796.1 g plastic/L); however, the toxicity of PPDO-octane (EC₂₀: 0.04-1.9 g plastic/L) was similar to that of polyethylene or polystyrene (excluding toxicity in D. magna). Similarly, the leachates of the three conventional plastics and PPDO-octane had obvious inhibitory effects on the growth of C. elegans at exposure concentrations higher than 0.01 g plastic/L; however, the toxicity of the PPDO leachates was at least an order of magnitude lower. Therefore, the environmental related concentration of the plastic leachates did not have significant toxic effects. Considering that a single bioassay does not provide comprehensive information on biological implications, this study provided a new integrated and efficient method for the environmental risk assessment (ERA) of plastic leachates. Moreover, the toxicity sensitivity of different organisms varied following exposure to different plastics, thus demonstrating that multiple organisms from different trophic levels should be included in the ERA for plastics.

Toxic effects of nanoplastics with different sizes and surface charges on epithelial-to-mesenchymal transition in A549 cells and the potential toxicological mechanism

As a newly emerging hazardous material, airborne nanoplastics are easily inhaled and accumulated in human and animal alveoli. We previously found that polystyrene nanoplastics (PS-NPs) induced apoptosis and inflammation of human alveolar epithelial A549 cells, implying they increase the risk of pulmonary fibrosis. In this study, we investigated whether PS-NPs induce epithelial-to-mesenchymal transition (EMT), the prelude to lung fibrosis, in A549 cells. A549 cells treated with PS-NPs of different sizes and surface charges exhibited increased migration and EMT markers accompanied with up-regulation of reactive oxygen species (ROS) and NADPH oxidase 4 (NOX4), an ROS generator located in the mitochondria and endoplasmic reticulum (ER). Moreover, PS-NPs caused mitochondrial dysfunction as demonstrated by membrane potential changes and impaired cellular energy metabolism. PS-NPs also activated ER stress as indicated by the up-regulated ER stress markers. As expected, smaller PS-NPs with a positive surface charge had stronger effects. Furthermore, the effects of PS-NPs on A549 cells were reversed by NOX4 gene knock-down, which verified the involvement of NOX4. Our results suggest that PS-NPs induce EMT in A549 cells through multiple mechanisms, and NOX4 is a key mediator in this process. Our findings contribute to understanding the toxicological mechanisms of nanoplastics on the respiratory system.

Important Role of Concave Surfaces in Deposition of Colloids under Favorable Conditions as Revealed by Microscale Visualization

This study conducted saturated column experiments to systematically investigate deposition of 1 μm positively charged polystyrene latex micro-colloids (representing microplastic particles) on negatively charged rough sand, glass beads, and soil with pore water velocities (PWV) from 4.9 × 10^-5 to 8.8 × 10^-4 m/s. A critical value of PWV was found below which colloidal attachment efficiency (AE) increased with increasing PWV. The increase in AE with PWV was attributed to enhanced delivery of the colloids and subsequent attachment at concave locations of rough collector surfaces. The AE decreased with further increasing PWV beyond the threshold because the convex sites became unavailable for colloid attachment. By simulating the rough surfaces using the Weierstrass-Mandelbrot equation, the extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) interaction energy calculations and torque analysis revealed that the adhesive torques could be reduced to be comparable or smaller than hydrodynamic torques even under the favorable conditions. Interestingly, scanning electron microscopic experiments showed that blocking occurred at convex sites at all ionic strengths (ISs) (e.g., even when the colloid-colloid interaction was attractive), whereas at concave sites, blocking and ripening (i.e., attached colloids favor subsequent attachment) occurred at low and high ISs, respectively. To our knowledge, our work was the first to show coexistence of blocking and ripening at high ISs due to variation of the collector surface morphology.

Fate and removal efficiency of polystyrene nanoplastics in a pilot drinking water treatment plant

Occurrence of microplastics and nanoplastics in aquatic systems, as well as in water compartments used to produce drinking water have become a major concern due to their impact on the environment and public health. Nanoplastics in particular, in regard to their fate and removal efficiency in drinking water treatment plants (DWTP), which ensure water quality and supply drinking water for human consumption have been, by far, rarely investigated. This study investigates the removal efficiency of polystyrene (PS) nanoplastics in a conventional water treatment plant providing drinking water for 500'000 consumers. For that purpose, a pilot-scale DWTP, located within the main treatment plant station, reproducing at a reduced scale the different processes and conditions of the main treatment plant is used. The results show that filtration process through sand and granular activated carbon (GAC) filters in the absence of coagulation achieves an overall nanoplastic removal of 88.1%. The removal efficiency of filtration processes is mainly attributed to physical retention and adsorption mechanisms. On the other hand, it is found that coagulation process greatly improves the removal efficiency of nanoplastics with a global removal efficiency equal to 99.4%. The effective removal efficiency of sand filtration increases considerably from 54.3% to 99.2% in the presence of coagulant, indicating that most of PS nanoplastics are removed during sand filtration process. The higher removal efficiency with the addition of coagulant is related to nanoplastics surface charge reduction and aggregation thus significantly increasing their retention in the filter media.

Effect of Agricultural Organic Inputs on Nanoplastics Transport in Saturated Goethite-Coated Porous Media: Particle Size Selectivity and Role of Dissolved Organic Matter

The transport of nanoplastics (NPs) through porous media is influenced by dissolved organic matter (DOM) released from agricultural organic inputs. Here, cotransport of NPs with three types of DOM (biochar_DOM (BC_DOM), wheat straw_DOM (WS_DOM), and swine manure_DOM (SM_DOM)) was investigated in saturated goethite (GT)-coated sand columns. The results showed that codeposition of 50 nm NPs (50NPs) with DOM occurred due to the formation of a GT-DOM-50NPs complex, while DOM loaded on GT-coated sand and 400 nm NPs (400NPs) aided 400NPs transport due to electrostatic repulsion. According to the quantum chemical calculation, humic acid and cellulose played a significant role in 50NPs retardation. Owing to its high concentration, moderate humification index (HIX), and cellulose content, SM_DOM exhibited the highest retardation of 50NPs transport and promoting effect on 400NPs transport. Owing to a high HIX, the effect of BC_DOM on the mobility of 400NPs was higher than that of WS_DOM. However, high cellulose content in WS_DOM caused it to exhibit a 50NPs retardation ability that was similar to that of BC_DOM. Our results highlight the particle size selectivity and significant influence of DOM type on the transport of NPs and elucidate their quantum and colloidal chemical-interface mechanisms in a typical agricultural environment.

Transport and deposition behaviors of microplastics in porous media: Co-impacts of N fertilizers and humic acid

Due to the interaction of fertilizers with microplastics (MPs) and porous media, fertilization process would influence MPs transport and distributions in soil. The co-impacts of N fertilizers (both inorganic and organic N fertilizers) and humic substance on MPs transport/retention behaviors in porous media were examined in 10 mM KCl solutions at pH 6. NH₄Cl and CO(NH₂)₂ were employed as inorganic and organic N fertilizers, respectively, while humic acid (HA) was used as model humic substance. We found that for all three sized MPs (0.2, 1 and 2 µm) without HA, both types of N fertilizers decreased their transport/increased their retention in porous media (both quartz sand and soil). N fertilizers adsorbed onto surfaces of MPs and sand/soil, lowering the electrostatic repulsion between MPs and porous media, thus contributed to the enhanced MPs deposition. MPs with N fertilizers in solutions more tightly attached onto porous media and thus were more difficult to be re-mobilized by low ionic strength solution elution. Via steric repulsion and increasing electrostatic repulsion between MPs and porous media due to adsorption onto their surfaces, HA could increase MPs transport with N fertilizers in solutions.

Biofilm on microplastics in aqueous environment: Physicochemical properties and environmental implications

The excellent properties of plastics make them widely used all over the world. However, when plastics enter the environmental medium, microplastics will inevitably be produced due to physical, chemical and biological factors. Studies have shown that microplastics have been detected in terrestrial, aquatic and atmospheric environments. In addition, the presence of microplastics will provide a new artificial adhesion substrate for biofilms. It has been proved that the formation of biofilms could significantly change some properties of microplastics. Some studies have found that microplastics attached with biofilms have higher environmental risks and eco-toxicity. Therefore, considering the widespread existence of microplastics and the ecological risks of microplastic biofilms, the physical and chemical properties of biofilms on microplastics and their impact on microplastics in aqueous environment are worth reviewing. In this paper, we comprehensively reviewed representative studies in this area. Firstly, this study reviews that the existence of biofilms could change the transport and deposition of microplastics. Subsequently, the presence of biofilms would enhance the ability of microplastics to accumulate pollutant, such as persistent organic pollutants, heavy metals and antibiotics. Moreover, the effect of biofilms on microplastics enrichment of harmful microorganisms is summarized. Finally, some future research needs and strategies are proposed to better understand the problem of biofilms on microplastics.

Tracking of realistic nanoplastics in complicated matrices by iridium element labeling and inductively coupled plasma mass spectroscopy

Herein, we proposed a protocol to track realistic nanoplastics (NPs) by labeling them with an iridium-containing organic molecular agent (denoted as Ir) followed by inductively coupled plasma mass spectroscopy detection, as exemplified by polyethylene terephthalate (PET) NPs prepared from water bottles. The Ir showed satisfactory labeling stability in typical environmental and biological matrices. After 3d's incubation, the leaching ratios were less than 3% in water, phosphate buffered saline, sea water, cell culture medium, artificial gastric juice, artificial intestinal fluid, sediment resuspension, and around 5% in fetal bovine serum. On this basis, in vivo distribution of PET NPs in mice was analyzed. The intravenously injected NPs widely distributed in liver, spleen, lung and kidney. Comparatively, NPs could hardly be detected in these organs after intragastric administration, suggesting that they could not penetrate the intestinal barriers. The temporal and spatial distribution of the NPs in an intertidal zone sediment resuspension model was also investigated. The NPs mostly deposited at the overlying deposit, implying the absorption-driven sinking behavior of NPs with natural organic matters. This work provided an effective way to quantitatively track realistic NPs, which could promote the understanding of the fate and effect of NPs in natural environments and organisms.

Key factors controlling transport of micro- and nanoplastic in porous media and its effect on coexisting pollutants

Environmental behavior of micro- and nanoplastics (M&NPs) pollution is an emerging topic in environmental research. The strong adsorption capacities of microplastics and nanoplastics to other substances is a concern. As a carrier, M&NPs probably transfer certain hazardous pollutants over long distance and pose risks to ecosystem and human health. Therefore, understanding the interaction and cotransport of M&NPs with coexisting pollutants is designed and becomes popular for many researchers. This paper introduced the carrier function of M&NPs firstly. Then literature on cotransport of M&NPs with potential coexisting contaminants has been reviewed and discussed. Interacting with micro and nanoplastics, the transport of coexisting matter may be facilitated or inhibited. In reverse, transport and deposition of M&NPs influenced by changed external environment and properties of plastics particles. Finally, limitations of existing studies on cotransport of M&NPs in porous media and directions for future studies were given. This review could serve as a useful reference for predicting the transport of microplastics and coexisting pollutants in natural porous media.

Effects of selected functional groups on nanoplastics transport in saturated media under diethylhexyl phthalate co-contamination conditions

The production and degradation of plastic remains can result in nanoplastics (NPs) formation. However, insufficient information regarding the environmental behaviors of NPs impedes comprehensive assessment of their significant threats. In this study, the transport behavior of unmodified NPs (PSNPs), carboxyl-modified NPs (PSNPs-COOH), and amino-modified NPs (PSNPs-NH₂) was investigated using column experiments in the presence and absence of goethite (GT) and diethylhexyl phthalate (DEHP). Quantum chemical computation was performed to reveal the transport mechanisms. The results showed that GT decreased the transport of NPs and the presence of DEHP decreased it further. Van der Waals forces and small electrostatic interactions coexisted between the PSNPs and GT and caused deposition. Ligand exchange caused greater deposition of PSNPs-COOH on GT-coated sand than that of PSNPs. Although hydrogen bonding existed between the DEHP and NPs with functional groups, an increase in the positive charge and chemical heterogeneity of the collector was the main reason for DEHP promoting the deposition of NPs. Because of low absolute negative zeta potential values, PSNPs-NH₂ was sensitive to chemical heterogeneity, and thus fully deposited (over 96.9%) in GT and GT-DEHP-coated columns. Generally, the deposition of NPs due to chemical heterogeneity was more significant than that due to the formation of chemical bonds and van der Waals, electrostatic, and hydrogen interactions. Our results highlight that the surface charge and functional groups significantly influence the transport behaviors of NPs and elucidate the fate of NPs in the terrestrial environment.

Biofilm-Developed Microplastics As Vectors of Pollutants in Aquatic Environments

Microplastics are a big and growing part of global pollution, which has aroused increasing concern in recent years because of their large amount, wide distribution, and adverse effects. Microplastics can sorb various pollutants from aquatic environments and act as vectors of pollutants. Most studies mainly focused on the virgin microplastics. However, microplastics in environments can be easily colonized by microorganisms, and form biofilm, which will influence the behaviors and potential risks of microplastics. The formation of biofilm on microplastics and its effects on their properties have been studied before, but their sorption and transport behaviors, and potential risks for pollutants' transfer have not been reviewed. In this paper, the role of biofilm-developed microplastics as vectors of pollutants was thoroughly analyzed and summarized. First, the formation of biofilm on microplastics, the compositions of microorganisms in biofilm, the influencing factors, and the property changes of microplastics after biofilm attachment are thoroughly reviewed. Second, the sorption of pollutants onto biofilm-developed microplastics is discussed. Third, the role of biofilm-developed microplastics as vector of pollutants are analyzed. We concluded that microplastics could provide unique substrates for microorganisms. Biofilm-developed microplastics can sorb more pollutants than the virgin ones, then act as vectors to introduce pollutants and attached microorganisms to aquatic environments and to organisms.

Insights into the transport of pristine and photoaged graphene oxide-hematite nanohybrids in saturated porous media: Impacts of XDLVO interactions and surface roughness

The transport behaviors of nanomaterials, in especial multifunctional nanohybrids have not been well disclosed until now. In this study, environmentally relevant conditions, including cation types, ionic strength and pH, were selected to investigate the transport and retention of graphene oxide-hematite (GO-Fe₂O₃) nanohybrids and a photoaged product in saturated sandy columns. Results show that more hybridization of hematite led to decreased negative surface charge, while increased particle size and hydrophobicity of the nanohybrids, which depressed their transport according to extented Derjaguin-Landau-Verwey-Overbeek (XDLVO) theory. However, the inhibitory transport of photoaged nanohybrids was attributed to their distinct surface roughness caused by relatively high hybridization and photoirradiation. Notably the restrained transport was alleviated in the CaCl₂ saturated media, since the less surface O-functional groups of the corresponding nanohybrids reduced the cation bridging effect caused by Ca²⁺. Similarly, increasing pH promoted the transport of the nanohybrids in NaCl saturated media, particularly for the nanohybrids that contained rich O-functional groups, but exerted inconspicuous effect on mobility of the nanohybrids in CaCl₂ saturated media. These observations highlight that both XDLVO interactions and surface roughness may work together to impact the transport and fate of the burgeoning, versatile nanohybrids in the environment.

Bio-dissolution process and mechanism of copper phosphate hybrid nanoflowers by Pseudomonas aeruginosa and its bacteria-toxicity in life cycle

Copper phosphate hybrid nanoflowers (HNF) have been widely used in chemical industries and wastewater treatment owing to its excellent catalytic activity and high stability. However, their fate and ecological risks have not received due attention after being discharged into natural environment. The significance of bacteria on the dissolution and fate of HNF and its toxicity to bacteria was evaluated from the perspective of its life cycle. Results showed that in the presence of Pseudomonas aeruginosa, HNF was gradually 'disassembled' into smaller nanoparticles (NPs), and then dissolved completely. More than half of the dissolution products (Cu²⁺) entered biological phase, and PO₄^3- was absorbed and utilized by bacteria as a phosphorus source. The mechanisms of HNF bio-dissolution are as follows: the metabolites of bacteria dissolve HNF through complexation and acidification, in which small molecular organic acids and amino acids play an important role. Bacteria toxicity experiments of HNF in its cycle life show that HNF exhibits lower cell toxicity, but its intermediate (smaller NPs) and final dissolved products (Cu²⁺) exhibit stronger cytotoxicity by increasing the level of intracellular ROS and membrane permeability of bacteria. This research is helpful to provide ecological risk assessment, develop targeted applications, and rationally design future nanomaterials.

Extracellular electron transfer influences the transport and retention of ferrihydrite nanoparticles in quartz sand coated with Shewanella oneidensis biofilm

Microbial biofilm has been found to impact the mobility of nanoparticles in saturated porous media by altering physicochemical properties of collector surface. However, little is known about the influence of biofilm's biological activity on nanoparticle transport and retention. Here, the transport of ferrihydrite nanoparticles (FhNPs) was studied in quartz sands coated with biofilm of Shewanella oneidensis MR-1 that is capable of reducing Fe(III) through extracellular electron transfer (EET). It was found that MR-1 biofilm coating enhanced FhNPs' deposition under different pH/ionic strength conditions and humic acid concentrations. More importantly, when the influent electron donor (glucose) concentration was increased to promote biofilm's EET activity, the breakthrough of FhNPs in biofilm-coated sands was inhibited. A lack of continuous and stable supply of electron donor, on the contrary, led to remobilization and release of the originally retained FhNPs. Column experiments with biofilm of EET-deficient MR-1 mutants (ΔomcA/ΔmtrC and ΔcymA) further indicated that the impairment of EET activity decreased the retention of FhNPs. It is proposed that the effective surface binding and adhesion of FhNPs that is required by direct EET cannot be neglected when evaluating the transport of FhNPs in sands coated with electroactive biofilm.

Transport of nanoparticles in porous media and its effects on the co-existing pollutants

Nanomaterials are widely used in daily life owing to their superior characteristics. The release and transport of nanoparticles (NPs) in the environment is inevitable during their entire life cycle, posing a risk to the aquatic environment. Thus, considerable attention has been focused on the fate and behavior of NPs in porous media, as well as the co-transport of NPs with other pollutants. In this review, current knowledge about the retention and transport behavior of NPs in porous media is summarized. NP transport in porous media is dominated by various internal and external factors, including the characteristics of NPs, porous media, and water flow. Generally, NPs with high density, small particle size, and surface coating are easily transported in porous media with the characteristics of large size, smooth surface, and low water saturation. Meanwhile, high pH and velocity, low temperature, and natural organic matter-containing fluids are also conducive to NP transport. Aggregation, adsorption, straining, and blocking are the primary mechanisms by which NPs affect the transport of co-existing pollutants in porous media. Current research on NP transport has been performed predominantly using modal porous media (e.g., sand and glass beads); however, there is a large gap between simulated and natural porous media. Further studies should focus on the transport, fate, and interaction of NPs and coexistent pollutants in natural porous media, as well as the coupling mechanisms under actual environmental conditions.

Transport and fate of microplastics in constructed wetlands: A microcosm study

Constructed wetlands (CWs) are commonly used for the treatment of wastewater. However, the removal of microplastics in CWs are poorly understood. In this work, the fate and behavior of microplastics of different shapes (film, fragment, and fiber) and sizes (0.5-1 mm and 2-4 mm) were studied. Results showed that the microplastic removal rate was 81.63% in surface flow constructed wetlands (SF-CWs) and 100% in horizontal subsurface flow constructed wetlands (HSF-CWs). Fragments and fibers with 2-4 mm sizes flowed out preferentially from SF-CWs. Retained microplastics accumulated dominantly near the inlet area. Biofilm attachment and physical filtration played an important role in the retention of microplastics. The microplastics' morphological features and the apertures of the substrate related to the transport of microplastics in the substrate. We observed the formation of holes, cracks, and weeny fibers on the surface of the microplastics extracted from the microcosms with a scanning electron microscope (SEM), but we detected no oxidation based on the Fourier transform infrared spectra. Our results suggest that CWs, especially HSF-CWs, are efficient for the removal of microplastic pollution. However, microplastics are persistent in CWs. The potential impacts of microplastics on the function of CWs should be further assessed.