Weathering of microplastics and interaction with other coexisting constituents in terrestrial and aquatic environments

Warming-induced microplastic accumulation and physiological toxicity in fiddler crabs

Under natural conditions, organisms are exposed to multiple stressors simultaneously, such as microplastic (MP) contamination and rising global temperatures. To assess the combined effects of acute MP exposure and increasing temperatures on the fiddler crab Minuca rapax, we exposed the crabs to polyethylene microspheres (0 and 2 mg L-1, size 53-63 μm) at three different temperatures (24, 27, and 30 °C). Physiological responses were assessed by measuring oxygen consumption and evaluating the biochemical activities of superoxide dismutase (SOD), catalase (CAT), and glutathione peroxidase (GPX) alongside lipid peroxidation (LPO) in the gills and hepatopancreas. MP bioaccumulation was quantified in the gills, digestive tract, and muscles. Our findings revealed that MP bioaccumulation was highest in the gills, followed by the digestive tract and muscles. Notably, elevated temperatures (30 °C) suppressed MP accumulation. At 30 °C, MP-exposed crabs showed increased oxygen consumption, while at 27 °C, SOD and GPx activities were elevated. In contrast, in MP-exposed crabs, catalase activity and LPO levels decreased at 30 °C. Overall, the combined effects of MP exposure and temperature-induced stress exacerbated physiological toxicity in Minuca rapax, underscoring the importance of considering multiple environmental stressors when evaluating the impacts of MP contamination.

Deciphering the inhibition mechanisms of microplastics on the full-stage sludge anaerobic digestion via enrichment to anaerobic microbes and toxicity of released compounds

Increasingly accumulated microplastics (MPs) in sludge could affect the sludge treatment process, while the contributions and mechanisms of MP particles and the released organic matters (MP-DOM) are not fully understood. To fill this gap, this study systematically investigates the effects and mechanisms of MPs on sludge anaerobic digestion. In the presence of MPs, the hydrolysis and acidogenesis of organic matters and methanogenesis all decreased due to the inhibition on the activity of anaerobic microorganisms and key enzymes. Mechanism analysis showed that MPs mainly acted as substrates to enrich anaerobic microorganisms and reduced the abundance and function of free microorganisms in sludge that metabolized organic matters. Moreover, a large amount of organic compounds including various plasticizers (dibutyl phthalate) and chain-scission products (benzoic acid) from physical abrasions of MPs with sludge particles, which made a 50.9-51.6 % contribution to the MP-inhibited sludge anaerobic digestion by the chemical toxicity and generated reactive oxygen species. Owing to the decreased digestion performance, the risk associated with ARGs and pathogenic bacteria increased distinctly. The findings highlight the concerns about MP-derived organic compounds compared to the substrate themselves and suggest the necessity for removing MPs in the sludge of wastewater treatment plants (WWTP).

Dynamic changes of leachates of aged plastic debris under different suspended sand concentrations and their toxicity

Plastic pollution in aquatic environments poses significant ecological risks, particularly through released leachates. While traditional or non-biodegradable plastics (non-BPs) are well-studied, biodegradable plastics (BPs) have emerged as alternatives that are designed to degrade more rapidly within the environment. However, research on the ecological risks of the leachates from aged BPs in aquatic environments is scarce. This controlled laboratory study investigated the leachate release processes and associated toxicity of traditional non-BPs, i.e., polyethylene terephthalate (PET) and polypropylene (PP) and BPs, i.e., polylactic acid (PLA) combined with polybutylene adipate terephthalate (PBAT) and starch-based plastic (SBP) under different aging time and suspended sand concentrations (0, 50, 100, 250, and 500 mg/L). The results indicated that BPs release significantly higher levels of dissolved organic carbon (DOC) than those of non-BPs, particularly at elevated suspended sand concentrations. The DOC concentrations in PLA+PBAT leachate reached 2.69 mg/L, surpassing those of PET and PP. Additionally, BPs released organic matter of larger molecular weight and protein-like substances. Toxicity tests showed that leachates from BPs inhibited the activity of Daphnia magna more than those from non-BPs. At a suspended sand concentration of 500 mg/L, PLA+PBAT leachate caused a 30 % inhibitory rate of Daphnia magna. Despite enhanced degradability, leachates from BPs may pose increased environmental risks in ecosystems with high suspended sand concentrations. Comprehensive ecological risk assessments are essential for effectively managing and mitigating these hazards of plastic pollution.

Potential ecological risk of microplastics contamination to environment in protect area lakes

Microplastics (MPs) in freshwater have been extensively studied on a global scale. However, a deeper understanding is still required regarding the occurrence characteristics and ecological risks of MPs in protected area lakes(PAL). Here, the study investigated MPs pollution in PAL, outside protected areas lakes (OPAL), and ponds (OPAP) in the eastern Qinghai-Tibetan Plateau, and a comprehensive analysis was conducted comparing lakes or ponds from different income regions. The results showed that PAL has a single source of contamination, while OPAL and OPAP exhibited more diverse MP sources. The surface of all samples showed significant physicochemical changes like oxygen-containing functional groups and potential signs of biodegradation. Microbiome analysis identified potential plastic-degrading bacteria on MPs, which varied by polymer type. Ecological risk assessment revealed that OPAL and OPAP face higher ecological risks, particularly from polymers like PVC and PC, while PAL has low risk. However, we should also consider the environmental changes over the past 100 years of history in this region and emphasize the environmental health of PAL. Notably, MPs pollution is more severe in lower-middle-income regions, highlighting the urgent need for stricter controls.

Microplastics in marine systems: A review of sources and sinks, typical environmental behaviors, and biological effects

Marine microplastics (MPs), whether originating from household and industrial production or stemming from the degradation of larger plastic fragments, have currently attracted significant global attention among the scientific community. The transport and deposition of MPs, characterized by their small size and large quantity, under oceanic hydrodynamics result in the contamination of a wide range of areas. Furthermore, MPs are capable of carrying metals and organic pollutants that constitute composite pollutants. The additives it carries will gradually release harmful substances during the degradation process. Once ingested by aquatic organisms and amplified by the food chain, these pollutants can adversely affect the survival and growth of marine flora and fauna, ultimately posing potential threats to humans. In this review, the major sources and sinks of MPs are described, considering the pollution of marine ecosystems. Additionally, typical environmental behaviors of MPs including their migration and accumulation in the ocean, their combined ability with heavy metals and organic pollutants, their leaching of additives, and their abiotic and biotic degradation pathways are discussed. The adverse effects on marine organisms resulting from ingestion and translocation of MPs are also reviewed herein. Even though the number of studies on MPs-associated environmental impacts is increasing rapidly, this review underscores that there is a pressing necessity to achieve an integrated assessment of MPs' impacts on marine ecology in order to address existing and future knowledge gaps.

Impact of particle size and oxide phase on microplastic transport through iron oxide-coated sand

The presence of microplastics in aquatic environments threatens the ecological system and human health. This study investigates the transport and retention of polystyrene microplastics (PSMPs) in clean sand, and hematite-, goethite-, and magnetite-coated iron oxide - sands as a function of size ratio and ionic strength. The breakthrough curves (BTCs), retention profiles, and hydraulic pressure were measured through soil-column experiments, and the retention of PSMPs was assessed from the observed BTCs, RPs and first-order attachment coefficients. In addition, the maximum attachment capacity was evaluated to assess the long-term retention of PSMPs. Experimental data showed that the retention of PSMPs increased in the order of goethite-, hematite-, and magnetite-coated sands in all size ratios, which is consistent with the order of attraction energy calculated by extended Derjaguin-Landau-Verwey-Overbeek theory. The findings demonstrated the feasibility of mitigating the transport of microplastic particles using naturally abundant iron-rich soils.

Decreased particle size enhances the aging behavior of microplastics during sewage sludge composting: Physicochemical properties and cadmium loading

Although aerobic composting is capable of aging microplastics (MPs), the influence of size on MPs aging during composting and loading of cadmium (Cd) remains unclear. Therefore, we investigated variations in the physicochemical properties of polyethylene terephthalate microplastics (PET-MPs) with different sizes (1.0 -5.0, 0.2 -1.0, and 0.05 -0.2 mm) during composting and the concentration of Cd accumulated on the surface of different-sized aged PET-MPs. The results indicated that PET-MPs exhibited size-dependent as they aged during composting, with smaller sizes aging faster. After composting, the 0.05 -0.2 mm PET-MPs had the greatest increase in specific surface area (205.5 %), compared with the 1.0 -5.0 mm (18.7 %) and 0.2 -1.0 mm (95.6 %) PET-MPs. The greatest increase in the carbonyl index/oxygen-to-carbon atom ratio was also observed for the 0.05 -0.2 mm PET-MPs, which were 2.25 / 3.27 and 0.02 / 2.11 times higher than those of the 1.0 -5.0 mm and 0.2-1.0 mm PET-MPs, respectively. Similarly, size-dependent accumulation of Cd on the aged PET-MPs was also observed: 0.05-0.2 mm (5.37 mg/kg Cd) > 0.2 -1.0 mm (2.90 mg/kg Cd) > 1.0-5.0 mm (0.78 mg/kg Cd). These findings demonstrate that the aging behavior of polymer is closely related to their size, emphasizing the role of size in the fate and pollutant loading of polymer.

Environmental Health and Safety Implications of the Interplay Between Microplastics and the Residing Biofilm

The increasing prevalence of microplastics in the environment has raised concerns about their potential environmental and health implications. Biofilms readily colonize microplastics upon their entry into the environment, altering their surface characteristics. While most studies have explored how biofilms influence the adsorption and transportation of other contaminants by microplastics, the reciprocal interplay between microplastics and biofilms and the resulting ecological risks remain understudied. This review comprehensively reviews the impact of microplastic properties on biofilm formation and composition, including the microbial community structure. We then explore the dynamic interactions between microplastics and biofilms, examining how biofilms alter the physicochemical properties, migration, and deposition of microplastics. Furthermore, we emphasize the potential of biofilm-colonized microplastics to influence the environmental fate of other pollutants. Lastly, we discuss how biofilm-microplastic interactions may modify the bioavailability, biotoxicity, and potential health implications of microplastics.

Modeling microplastic transport through porous media: Challenges arising from dynamic transport behavior

Modelling microplastic transport through porous media, such as soils and aquifers, is an emerging research topic, where existing hydrogeological models for (reactive) solute and colloid transport have shown limited effectiveness thus far. This perspective article draws upon recent literature to provide a brief overview of key microplastic transport processes, with emphases on less well-understood processes, to propose potential research directions for efficiently modeling microplastic transport through the porous environment. Microplastics are particulate matter with distinct physicochemical properties. Biogeochemical processes and physical interactions with the surrounding environment cause microplastic properties such as material density, geometry, chemical composition, and DLVO interaction parameters to change dynamically, through complex webs of interactions and feedbacks that dynamically affect transport behavior. Furthermore, microplastic material densities, which cluster around that of water, distinguish microplastics from other colloids, with impactful consequences that are often underappreciated. For example, (near-)neutral material densities cause microplastic transport behavior to be highly sensitive to spatio-temporally varying environmental conditions. The dynamic nature of microplastic properties implies that at environmentally relevant large spatio-temporal scales, the complex transport behavior may be effectively intractable to direct physical modeling. Therefore, efficient modeling may require integrating reduced-complexity physics-constrained models, with stochastic or statistical analyses, supported by extensive environmental data.

A critical review of microplastics characterisation in aquatic environments: recent trends in the last 10 years

Anthropogenic activities have introduced various contaminants into freshwater and marine ecosystems. Microplastics (MPs) are persistent and ubiquitous contaminants threatening natural ecosystems and impairing organisms at different biological levels of organization. Their durability and degradation rate pose a great concern in the scientific community, and thus, several techniques have been used to detect MPs effectively. The present study critically reviews the most commonly used techniques (FTIR, Raman, and fluorescence) and others considered novel regarding MP detection and characterisation, namely LIBS. Despite the effectiveness of such methodologies, none are free from drawbacks. The scientific community must join efforts to create, for example, innovative real-time (bio)sensing methodologies for MPs to overcome this gap.

How aging microplastics influence heavy metal environmental fate and bioavailability: A systematic review

Microplastics (MPs) are now pervasive in the environment, with annual emissions estimated to range from 10 to 40 million metric tons. Aging (weathering) processes induced by environmental changes, gradually degrade MPs into smaller particles with higher surface reactivity. These particles readily adsorb surrounding heavy metals (HMs), forming complex pollutants. Such composite contaminants can bioaccumulate through the food chain, ultimately posing significant threats to ecosystems and human health. At present, this type of combined pollution has emerged as a pressing global challenge requiring urgent attention. Although research on the impact of MPs aging processes on the environmental behavior of HMs has increased in recent years, there remains a lack of systematic reviews. Therefore, there is an urgent need to collate relevant studies to better assess and mitigate the risks of composite pollution by MPs and HMs. This paper provides a comprehensive review of the effects of aging processes on the physicochemical properties of MPs and explores the mechanisms of adsorption, mobility, and bioavailability of HMs by aged MPs, systematically summarizing the key environmental factors influencing the interactions between aged MPs and HMs. Finally, the prospects for research on the co-occurrence of MPs and HMs in the environment were discussed. This review provides a scientific basis for the environmental risk assessment of such combined pollution and holds substantial practical significance for advancing ecological conservation.

Unveiling microbial succession dynamics on different plastic surfaces using WGCNA

Over recent decades, marine microorganisms have increasingly adapted to plastic debris, forming distinct plastic-attached microbial communities. Despite this, the colonization and succession processes on plastic surfaces in marine environments remain poorly understood. To address this knowledge gap, we conducted a microbiome succession experiment using four common plastic polymers (PE, PP, PS, and PET), as well as glass and wood, in a temperature-controlled seawater system over a 2- to 90-day period. We employed long-read 16S rRNA metabarcoding to profile the prokaryotic microbiome's taxonomic composition at five time points throughout the experiment. By applying Weighted Gene Co-expression Network Analysis (WGCNA) to our 16S metabarcoding data, we identified unique succession signatures for 77 bacterial genera and observed polymer-specific enrichment in 39 genera. Our findings also revealed that the most significant variations in microbiome composition across surfaces occurred during the initial succession stages, with potential intra-genus relationships that are linked to surface preferences. This research advances our understanding of microbial succession dynamics on marine plastic debris and introduces a robust statistical approach for identifying succession signatures of specific bacterial taxa.

Insights into the photoaging behavior of biodegradable and nondegradable microplastics: Spectroscopic and molecular characteristics of dissolved organic matter release

Biodegradable plastics are increasingly used as a potential alternative to nondegradable plastics to tackle plastic pollution. However, recent studies have raised concerns about the ecological risks posed by biodegradable microplastics (MPs), which mainly focused on the risks generated by MPs themselves, neglecting the risks associated with the MPs derived dissolved organic matter (DOM). Therefore, this study selected polylactic acid (PLA) MPs with 50 µm particle size and polystyrene (PS) MPs with 50 µm and 500 nm particle sizes as representatives of biodegradable and nondegradable MPs, respectively, to comparative investigate their photoaging behavior, particularly the differences in DOM release. The results showed that both PLA-MPs and PS-MPs exhibited considerable photoaging under ultraviolet irradiation, accompanied by different color changes (PS turned yellow and PLA turned grayish brown), which were attributed to the different functional groups produced on their surfaces after photoaging (PS-MPs: CO, PLA-MPs: terminal -COOH). Additionally, excitation-emission matrix characterization combined with parallel factor analysis revealed that 50 µm PLA-MPs (16-23 %) released more protein-like low molecular weight DOM during photoaging than that of both 50 µm PS-MPs (7-13 %) and 500 nm PS-MPs (8-18 %). Fourier transform-ion cyclotron resonance-mass spectrometry (FT-ICR-MS) further confirmed that PLA-MPs (41.4 %) produced more unstable DOM easily utilized by microorganisms than that of 50 µm PS-MPs (6.3 %) and 500 nm PS-MPs (7.9 %). These results together suggested that biodegradable MPs with small particle size derived DOM may have a greater impact on microbial activity and carbon cycle than that of nondegradable MPs.

Co-occurrence of microplastics and heavy metals to urban river sediments: The vertical distribution characterization and comprehensive ecological risk assessment

Microplastics (MPs) and heavy metals (HMs) are deemed to pose ecological risks in river ecosystems. The vertical distribution of these pollutants is more conducive to reflecting pollution status and monitoring trends in the sediment. This work analyzed the horizontal and vertical distribution, carried out a risk assessment of HMs and MPs in urban river sediment, and further optimized the two-dimensional comprehensive index (TPI) model for MPs-HMs combined pollution. The highest rates of contamination were for Zn, As, and Cd, and MP abundance in sediment ranged from 20.00 ± 8.82-1933.33 ± 141.42 items·kg-1, mainly characterized by PE and fragments. Moreover, the mean potential ecological risk index for MPs (PRI) at different depths of sediment were 197.21 ± 247.14, 176.79 ± 293.86, and 246.98 ± 538.38, respectively, indicating a moderate risk and the highest PRI value is at the bottom. The TPI exhibited that the average TPI at different depths is 324.10 ± 138.63, 368.30 ± 157.13, and 481.88 ± 296.05, indicating that the comprehensive pollution risk level belongs to considerable, the TPI increases with the depth of the sediment. The results further improved the objectivity and accuracy of the research on the ecotoxicity of compositive pollutants and provided an in-depth understanding of MPs and HMs in urban freshwater basins from a vertical perspective.

Biodegradable microplastics adsorb more Cd than conventional microplastic and biofilms enhance their adsorption

Biodegradable polylactic acid (PLA) mulch has been developed to replace conventional polyethylene (PE) mulch in agriculture to reduce plastic pollution and the accumulation of microplastics (MPs) in soil. Cadmium (Cd) is a significant soil contaminant, and can be adsorbed by MPs. It is increasingly recognised that in the natural environment biofilms can develop on MPs and that this can affect their adsorption properties. We exposed PLA and PE mulches outdoors for 16 months. MPs were then generated from pristine and weathered mulches. Biofilms developed on the weathered plastics. Oxygen-containing functional groups were detected on the weathered, but not the pristine PE, abundance of these groups increased for the weathered PLA. After removal of the biofilm the observed increases in oxygen-containing functional groups relative to the pristine plastics remained. In adsorption experiments pristine PLA MPs had a greater maximum adsorption capacity than pristine PE MPs (106-126 vs 23.2 mg/kg) despite having a lower specific surface area (0.325 m2/g vs 1.82 m2/g) suggesting that the greater levels of adsorption were due to MP chemistry. The weathered plastics adsorbed more Cd than the pristine plastics (e.g. maximum adsorption capacities of 153-185 and 152 mg/kg for the weathered PLA and PE respectively). However, after removal of the biofilm, adsorption of Cd to the weathered MPs was no greater than for the pristine plastics. This suggests that the increased adsorption of Cd due to weathering was caused primarily by adsorption onto the biofilm.

Potential impact and mechanism of aged polyethylene microplastics on nitrogen assimilation of Lactuca sativa L

Nitrogen (N) is the driving factor for crop yield and quality, and more research is needed on the mechanisms of aged micro/nano plastics (MNPs) on N assimilation in edible crops. In this study, pot experiments were conducted to investigate the potential effect of aged polyethylene (PE) microplastic addition (particle sizes: 20 and 0.1 µm, addition levels: 0.5 % [w/w], referred to as the control (CK), P20 (20-µm PE), AP20 (20-µm aged PE), P0.1 (0.1-µm PE), AP0.1 (0.1-µm aged PE) on MNPs accumulation and N assimilation in romaine lettuce (Lactuca sativa L.). The results showed that the particle size of MNPs accumulated in lettuce decreased from root > stem > leaf. Compared to CK, the fresh plant weight significantly decreased by 40.84 and 51.62 % in AP20 and AP0.1, respectively. The results indicated that MNPs could affect lettuce growth via soil nutrient availability, and aged 100-nm PE decreased soil NH4+ and plant TN concentrations by 9.10 and 21.99 %, respectively, compared to that in CK. N assimilation in lettuce was significantly inhibited by aged MNPs, which manifested as the soluble protein content in lettuce under AP20 and AP0.1 treatments being significantly reduced by 30.59 and 42.11 %, respectively (P < 0.01). Possible mechanisms included inhibition of carbon assimilation, photosynthesis, and Ribulose-1,5-bisphosphate carboxylase/oxygenase (Rubisco). The toxic effect of aged MNPs on growth and N assimilation in lettuce was much greater than that of the particle size, which was attributed to the carbonyl and hydroxyl groups caused by aging. Structural equation modeling showed that soil nitrogen positively affected total nitrogen (TN) (0.359), chlorophyll (0.665), Rubisco (0.441), soluble protein (0.383), and biomass (0.460), and negatively affected phosphoenolpyruvate carboxylase (PEPC) (-0.325), soluble sugar (-0.134). This study enhances current understandings of the effects of microplastics on N assimilation in edible crops. The findings indicated that aged MNPs accumulation in vegetables may negatively affect agricultural sustainability and food safety.

Towards harmonized ecotoxicological effect assessment of micro- and nanoplastics in aquatic systems

Micro- and nanoplastics are globally important environmental pollutants. Although research in this field is continuously improving, there are a number of uncertainties, inconsistencies and methodological challenges in the effect assessment of micro- and nanoparticles in freshwater systems. The current understanding of adverse effects is partly biased by the use of non-relevant particle types, unsuitable test setups and environmentally unrealistic dose metrics, which does not take into account realistic processes in particle uptake and consequent effects. Here we summarize the current state of the art by compiling the most recent research with the aim to highlight research gaps and further necessary steps towards more harmonized testing systems. In particular, ecotoxicological scenarios need to mirror environmentally realistic particle diversity and bioavailability. Harmonized test setups should include different uptake pathways, exposures and comparisons with natural reference particles. Effect assessments need to differentiate direct physical particle effects, such as lesions and toxicity caused by the polymer, from indirect effects, such as alterations of ambient environmental conditions by leaching, change of turbidity, food dilution and organisms' behavior. Implementation of these suggestions can contribute to harmonization and more effective, evidence-based assessments of the ecotoxicological effects of micro- and nanoplastics.

Current scenario of emerging pollutants in farmlands and water reservoirs: Prospects and challenges

Globally, roughly more than 400 million metric tons of plastics are produced annually. Similarly, the pharmaceuticals business is rising exponentially yearly, 5.8 %. It is expected to increase from USD 714 billion to USD 1454 billion by 2029. Beyond their intended uses, these substances are released into the environment as contaminants due to improper usage and management practices. Therefore, pharmaceuticals and microplastics (MPs) are classified as emerging pollutants (EPs), and their existence in agricultural ecosystems adversely affects soil and environmental health, ultimately impacting both ecological and human well-being. Pharmaceuticals and MP-loaded organic amendments (especially manure) are a primary cause of emerging soil pollutants. The increasing application of treated wastewater or biosolids as irrigation water or soil conditioners, mainly when derived from untreated sewage sludge, can introduce pharmaceuticals and MPs into the farmlands, merging these pollutants within the soil medium. The co-occurrence of MPs and pharmaceuticals leads to prolonged environmental presence and gradual bioaccumulation in organisms over time, contributing to persistent contamination and long-lasting effects on ecosystems. Moreover, these EPs have the potential to alter the composition of soil biogeochemistry and disrupt overall soil health and productivity. Numerous methods have been developed to address this emerging issue, including electrochemical degradation, advanced oxidation processes, photocatalytic degradation, biosurfactants, micro- and nano-bubble systems, ultrasonic cavitation, nanotechnology, constructed wetlands, and many hybrid approaches. This review explores the extent of EPs, their interactions, and management strategies in EPs-contaminated environments.

Recent advances and factors affecting the adsorption of nano/microplastics by magnetic biochar

The increase in nano/microplastics (NPs/MPs) from various everyday products entering aquatic environments highlights the urgent need to develop mitigation strategies. Biochar (BC), known for its excellent adsorption capabilities, can effectively target various harmful organic and inorganic pollutants. However, traditional methods involving powdered BC necessitate centrifugation and filtration, which can lead to the desorption of pollutants and subsequent secondary pollution. Magnetic biochar (MBC) offers a solution that facilitates straightforward and rapid separation from water through magnetic techniques. This review provides the latest insights into the progress made in MBC applications for the adsorption of NPs/MPs. This review further discusses how external factors such as pH, ionic strength, temperature, competing ions, dissolved organic matter, aging time, and particle size impact the MBC adsorption efficiency of MPs. The use of machine learning (ML) for optimizing the design and properties of BC materials is also briefly addressed. Finally, this review addresses existing challenges and future research directions aimed at improving the large-scale application of MBC for NPs/MPs removal.

Distribution of microplastics in the tidal flats of La Parguera, Puerto Rico

Tidal flats form behind mangrove forests and are critical coastal ecosystems influenced by ocean and land-based processes. To assess microplastics (MPs, <5 mm) distribution within tidal flats we studied four sites in southwest Puerto Rico with varying mangrove densities and anthropogenic influences. We characterized MPs from surface sediments along a transect at each tidal flat. On average 148.64 ± 138.87 MPs kg-1 were collected with the majority (55.5 %) 0.3-1 mm in size. MPs abundance within transects was positively correlated to distance from mangroves at three sites. The most common polymers were polyethylene (48.4 %) and polypropylene (16.1 %). As expected, the roadside site had the highest abundance of MPs, but surprisingly, a remote island site had the second highest amount. Two other sites likely benefited from thicker mangrove cover and less human interference. While mangroves minimized MPs accumulation, improved waste management is also needed to reduce MPs delivered to these ecosystems.

Composting treatment increases the risk of microplastics pollution in process and compost products

Organic compost is a significant carrier of microplastics (MPs) entering agricultural soil. However, the extent of MPs pollution during composting, a widely employed organic waste treatment technology, remains unknown. This study investigated MPs dynamic pollution characteristics during composting and compost products using agricultural wastes as raw materials and quantitatively evaluated ecological risks of MPs pollution. Sorting/screening before and after composting significantly reduced MPs abundance by 29.4 % and 32.1 %, respectively, but substantial quantities of MPs persisted in final compost products. Microplastics were mainly 0.5-1 mm (30.3 %), colored fibers/fragments composed of PP/PE, PE, or PP. Regardless of whether plastics in raw materials were sorted, composting increased MPs abundance from 5133-7867 items kg-1 in raw materials to 5667-11200 items kg-1 in compost products and smaller MPs (<1 mm) proportion from 48.5 % to 54.4 %, while significantly decreased size from 1328 μm to 1093 μm. After composting, MPs exhibited rougher morphologies (folds, cracks, and grooves) and adhered to more mineral colloids, and the pollution level increased. Collectively, composting treatment enhances MPs pollution risk both during composting process and in compost products. These findings present a theoretical reference for the establishment of limit standards for MPs in organic compost.

Quantitative study of microplastic degradation in urban hydrosystems: Comparing in situ environmentally aged microplastics vs. artificially aged materials generated via accelerated photo-oxidation

The degradation of plastic waste is a major research challenge due to the adverse impacts of microplastic weathering on the environment and ecosystems. As a major source of plastic contamination comes from urban hydrosystems, studying MP degradation prior to their environmental dissemination is crucial. Through a combination of field sampling and laboratory experiments, this study provides a thorough statistical degradation comparison analysis between polyethylene in situ environmentally aged microplastics and artificially aged films. In the laboratory, pristine nonadditivated low-density polyethylene films were exposed to controlled ultraviolet (UV) radiation to simulate aging for various durations. Firstly, the study aims to assess the representativeness of controlled UV degradation to mimic urban in situ MPs. The second goal is to identify polyethylene (PE) degradation characteristics in various environmental matrices such as stormwater, suspended solids and sediment samples from a stormwater detention basin in a large urban area in France. Artificially aged plastics exhibit distinct alterations in physical and chemical properties, corresponding solely to the abiotic degradation observed in situ. In contrast, environmental particles display notable markers of biotic chemical degradation and hydrolysis. Moreover, the degradation environment varies significantly: it is predominantly abiotic for MPs collected in stormwater samples, while it is largely biotic for MPs collected in sediment and suspended solid samples. Besides, MPs from stormwater and suspended solid samples show a higher degree of hydrolysis degradation. Finally, additional comparisons with common consumer materials, before and after use, show almost no signs of notable degradation compared to the environmentally and artificially aged materials considered in this study.

Exploring different effects of biofilm formation and natural organic matter adsorption on the properties of three typical microplastics in the freshwater

Microplastics entering the aqueous environment are susceptible to the surrounding environmental processes, including biofilm formation and natural organic matter (NOM) adsorption, which significantly alters their properties and environmental fate. In this study, polyethylene (PE), polyvinyl chloride (PVC) and polyethylene terephthalate (PET) microplastics were respectively incubated in the untreated and disinfected freshwater to investigate the different effects of biofilm formation and only NOM adsorption on the properties of microplastics. The results showed that the total amount of fouling biomass driven by biofilm formation was markedly higher than that of NOM adsorption. The changes in microplastic surface morphologies and special surface area dominated by biofilm formation and NOM adsorption were different; biofilm formation induced various shaped bacteria and a dense layer of extracellular polymeric substances adhering on microplastic surfaces with the decreased special surface area, whereas NOM adsorption mainly resulted in the obvious pores, cracks and winkles and the increased special surface area, indicating the initial degradation of microplastics. Moreover, both biofilm formation and NOM adsorption could reduce the hydrophobicity of three microplastics. The decreased trends of the hydrophobicity of microplastics were closely related to the amount of fouling biomass in a linear relationship with different influenced coefficients (slope a), subsequently verifying that NOM adsorption played a key role in the alternation of the hydrophobicity of microplastics. Surface chemical characterization by FTIR and 3D-EEMs presented the generation of additional functional groups and components on the microplastic surface attributed to the biofilm formation and NOM adsorption in different extent and sequence. This study provides more detailed information about the different effects of biofilm formation and NOM adsorption on the properties of microplastics in the aqueous environment.

A Critical Review of an Environmental Risk Substance Induced by Aging Microplastics: Insights into Environmentally Persistent Free Radicals

Microplastics (MPs), as an emerging contaminants category, can undergo complex aging in a variety of environmental matrices in which the chemical bonds of polymer molecules can be broken to form free radicals. While the existence of free radicals in aged plastics has been known for over half a century, only recently has significant research on a new type of environmentally risky substance, namely environmentally persistent free radicals (EPFRs), present in aged MPs and their environmental effects, been started, but it is still in its infancy. To address these issues, this work examines EPFR generation on MPs and their environmental effect by reviewing publications from 2012 to 2023. The aging processes and mechanisms of MPs in the environment are first summarized. Then, the occurrence and formation mechanisms of EPFRs on aged MPs are specifically discussed. Additionally, the reactivity of EPFRs on aging MPs and their influencing factors are comprehensively considered, such as their physicochemical properties, oxygen content, and coexisting substances. Due to their reactivity, EPFRs can interact directly with some substances (e.g., p-nitrophenol and proteins, etc.) or induce the generation of reactive oxygen species, leading to diverse environmental effects, including pollutant transformation, biotoxicity, and health risks. Finally, research challenges and perspectives for EPFRs formation on aging MPs and related environmental implications are presented. Given the environmental fate and risk of MPs-EPFRs, our urgent call for a better understanding of the potential hazards of aged MPs is to help develop a sustainable path for plastics management.

Aging Dynamics of Polyvinyl Chloride Microplastics in Three Soils with Different Properties

Microplastic (MP) contamination in soil has been of great concern, but the dynamic aging process and potential pathways of MPs in natural soil systems remain poorly understood. Herein, poly(vinyl chloride) microplastics (5% w/w) were weathered for 12 months in sandy soil, silty clay, and silt loam. The results showed that the continuous increase of C═O and O-H groups (rate constant, k = 0.080-0.424 m-1) with time was observed on the surface of MPs aging in sandy soil due to the leading role of •OH induced by light irradiation. In the loam soil, the abundant coating of aluminosilicates and iron oxides on the MP surface by the formation of mineral-hydroxyl groups inhibited the generation of the C═O group (k < 0.165 m-1). The k of the characteristic bond C-Cl during the first 9 months was 9.51 and 1.93 times higher in clay compared to that in sandy and loam soil, respectively, revealing that dechlorination triggered the first step of the aging process for MPs in clay owing to the participation of degrading bacteria (Phenylobacterium and Caulobacteraceae). The results provide important insights into the aging dynamics of MPs in environmentally realistic circumstance, which account for understanding the different aging processes of MPs in different soils.

Plastic additives as a new threat to the global environment: Research status, remediation strategies and perspectives

Discharge or leaching of plastic additives, which are an essential part of the plastic production process, can lead to environmental pollution with serious impacts on human and ecosystem health. Recently, the emission of plastic additives is increasing dramatically, but its pollution condition has not received enough attention. Meanwhile, the effective treatment strategy of plastic additive pollution is lack of systematic introduction. Therefore, it is crucial to analyze the harm and pollution status of plastic additives and explore effective pollution control strategies. This paper reviews the latest research progress on additives in plastics, describes the effects of their migration into packaged products and leaching into the environment, presents the hazards of four major classes of plastic additives (i.e., plasticizers, flame retardants, stabilizers, and antimicrobials), summarizes the existing abiotic/biotic strategies for accelerated the remediation of additives, and finally provides perspectives on future research on the removal of plastic additives. To the best of our knowledge, this is the first review that systematically analyzes strategies for the treatment of plastic additives. The study of these strategies could (i) provide feasible, cost-effective abiotic method for the removal of plastic additives, (ii) further enrich the current knowledge on plastic additive bioremediation, and (iii) present application and future development of plants, invertebrates and machine learning in plastic additive remediation.

A comparative study on the stability and coagulation removal of aged vs. nonaged nanoplastics in surface water

Nanoplastics (NPs) are released into surface water due to the widespread use of plastics, undergoing aging from environmental and human factors that alter their physical and chemical characteristics. However, detecting NPs remains challenging, resulting in limited research on their behavior in surface water and their removal efficiency by drinking water treatment. This study utilizes palladium-doped polystyrene nanoplastics (PSNPs) as tracers to enable precise detection and quantification through ICP-MS, thereby overcoming the limitations of conventional detection methods. PSNPs are aged using solar irradiation and ozone to simulate both natural and artificial aging processes, affecting the physical and chemical properties of NPs, which in turn influence their behavior in water treatment systems. Moreover, the study investigates the impact of various coagulation conditions, including different coagulants (AlCl3 and PACl), pH levels (4-9), and humic acid (HA) concentrations (0-10 mg/L), on the of both aged and nonaged NPs. The results demonstrate solar aging triggers significant morphological changes in PSNPs, while ozone aging induces more oxygen functional groups on PSNPs (CIozone=20.99; CIsolar=0.70), increasing sensitivity to HA concentrations and resulting in reduced removal efficiencies for ozone aged PSNPs by AlCl3 (68.68 %) and PACl (74.74 %). In addition, PACl achieves higher PSNPs removal efficiencies (REmin=88.59 %) than that of AlCl3 (REmin=85.57 %) under varied pH levels. This research fills a gap in understanding aged NPs behavior in surface water and offers practical solutions for optimizing coagulation for NPs removal, enhancing our ability to predict NPs environmental fate and manage NPs pollution to ensure drinking water safety.

Occurrence characteristics and ecological impact of agricultural soil microplastics in the Qinghai Tibetan Plateau, China

Plastic mulch is widely recognized as a significant contributor to microplastics (MPs) pollution in agricultural soil. However, its direct impact on remote areas with low population density remains uncertain due to multiple pollution sources. This study aims to investigate MPs pollution and its risks regarding agricultural soil in the Qinghai Tibetan Plateau (QTP) in China. The results revealed that soil samples from the study area exhibited a range of MPs abundance, varying from 16.67 to 950 items/kg, with the highest average abundance observed in Chengguan district (CG) soil samples (611.11 items/kg). Polyethylene terephthalate (PET), polypropylene (PP), and polyethylene (PE) were identified as the predominant components of MPs in farmland soil. Furthermore, significantly higher levels of MPs were found in the facility agriculture soil compared to the control soil. Diversity and risk of MPs in different regions and cultivation conditions were significantly different. According to the employed risk assessment models, agricultural soil demonstrated a relatively high polymer risk (47 % of areas classified as level III). In addition to being influenced by exogenous factors, the diversity of MPs also plays an intrinsic role in regulating the risk of MPs pollution. This study contributes to an enhanced comprehension of the issue of MPs pollution in QTP farmland soil, providing valuable empirical evidence and theoretical underpinning for the development of efficacious control strategies.

Selective enrichment of high-risk antibiotic resistance genes and priority pathogens in freshwater plastisphere: Unique role of biodegradable microplastics

Microplastics (MPs) has been concerned as emerging vectors for spreading antibiotic resistance and pathogenicity in aquatic environments, but the role of biodegradable MPs remains largely unknown. Herein, field in-situ incubation method combined with metagenomic sequencing were employed to reveal the dispersal characteristics of microbial community, antibiotic resistance genes (ARGs), mobile genetic elements (MGEs), and virulence factors (VFs) enriched by MPs biofilms. Results showed that planktonic microbes were more prone to enrich on biodegradable MPs (i.e., polyhydroxyalkanoate and polylactic acid) than non-biodegradable MPs (i.e., polystyrene, polypropylene and polyethylene). Distinctive microbial communities were assembled on biodegradable MPs, and the abundances of ARGs, MGEs, and VFs on biofilms of biodegradable MPs were much higher than that of non-biodegradable MPs. Notably, network analysis showed that the biodegradable MPs selectively enriched pathogens carrying ARGs, VFs and MGEs concurrently, suggesting a strong potential risks of co-spreading antibiotic resistance and pathogenicity through horizontal gene transfer. According to WHO priority list of Antibiotic Resistant Pathogens (ARPs) and ARGs health risk assessment framework, the highest abundances of Priority 1 ARPs and Rank I risk ARGs were found on polylactic acid and polyhydroxyalkanoate, respectively. These findings elucidate the unique and critical role of biodegradable MPs for selective enrichment of high-risk ARGs and priority pathogens in freshwater environments.

Insights into photoaging behaviors and mechanisms of biodegradable and conventional microplastics in soil

Understanding the photoaging dynamics of biodegradable and conventional microplastics (MPs) is crucial due to their widespread environmental risks. However, studies on the photoaging behaviors of different MPs in soil ecosystems are limited. This study focused on two representative MPs, conventional polyethylene (PE) and biodegradable poly(butylene adipate-co-terephthalate) (PBAT), examining their photoaging processes in soil. The photoaging performance of these MPs was characterized using indicators like carbonyl index (CI), oxygen-carbon ratio (O/C), weight loss (WL), and water contact angle (CA). The entropy weight method (EWM) was employed to calculate a comprehensive aging index (CAI), quantitatively measuring overall photoaging. The results revealed that PBAT underwent significantly greater photoaging than PE, with the CAI of aged PBAT (0.88) being over 15 times higher than that of aged PE (0.06). Environmental persistent free radicals (EPFRs) were identified as key factors in MPs' photoaging. LC-MS/MS analysis revealed oxygen-containing byproducts and plastic additives, suggesting photodegradation pathways involving chain scission and oxidation. Density functional theory (DFT) highlighted differences in energy gaps and susceptibility to free radical attacks between PE and PBAT. This study not only compares photoaging behaviors but also introduces a novel method for evaluating MPs' aging, providing a basis for assessing ecological risks in soil.

Effect of seasonal dynamics on microplastic pollution and its vectorization of heavy metals: An in-vitro toxicity assessment in Artemia franciscana

This study extensively investigated the abundance of microplastics in Thiruvottiyur coastal area of Chennai, India, before and after Cyclone Michaung. The results demonstrated a significant correlation between microplastic distribution and aftermath rainfall. The concentration of microplastics in sediments increased from 150 ± 48 particles kg-1 to 186 ± 21 particles kg-1 after the cyclone. In seawater, the concentration rose from 1.28 particles L-1 to 3.65 particles L-1, respectively. Heavy metals such as Al, Mg, Zn, Cr, Pb, Cu, Cd, Co, and As were detected on the surface of microplastics, demonstrating their vectorization potential for co-contaminants. After exposure, these microplastics induced oxidative stress in Artemia franciscana with increased superoxide dismutase (SOD), catalase, and reactive oxygen species (ROS). Fluctuations in weather conditions lead to heterogeneous changes in microplastic distribution, revealing the seasonal dynamics of microplastics. This study will provide background information to devise strategies for mitigating microplastic pollution in the marine environment.

A state-of-the-art review of environmental behavior and potential risks of biodegradable microplastics in soil ecosystems: Comparison with conventional microplastics

As the use of biodegradable plastics becomes increasingly widespread, their environmental behaviors and impacts warrant attention. Unlike conventional plastics, their degradability predisposes them to fragment into microplastics (MPs) more readily. These MPs subsequently enter the terrestrial environment. The abundant functional groups of biodegradable MPs significantly affect their transport and interactions with other contaminants (e.g., organic contaminants and heavy metals). The intermediates and additives released from depolymerization of biodegradable MPs, as well as coexisting contaminants, induce alterations in soil ecosystems. These processes indicate that the impacts of biodegradable MPs on soil ecosystems might significantly diverge from conventional MPs. However, an exhaustive and timely comparison of the environmental behaviors and effects of biodegradable and conventional MPs within soil ecosystems remains scarce. To address this gap, the Web of Science database and bibliometric software were utilized to identify publications with keywords containing biodegradable MPs and soil. Moreover, this review comprehensively summarizes the transport behavior of biodegradable MPs, their role as contaminant carriers, and the potential risks they pose to soil physicochemical properties, nutrient cycling, biota, and CO2 emissions as compared with conventional MPs. Biodegradable MPs, due to their great transport and adsorption capacity, facilitate the mobility of coexisting contaminants, potentially inducing widespread soil and groundwater contamination. Additionally, these MPs and their depolymerization products can disrupt soil ecosystems by altering physicochemical properties, increasing microbial biomass, decreasing microbial diversity, inhibiting the development of plants and animals, and increasing CO2 emissions. Finally, some perspectives are proposed to outline future research directions. Overall, this study emphasizes the pronounced effects of biodegradable MPs on soil ecosystems relative to their conventional counterparts and contributes to the understanding and management of biodegradable plastic contamination within the terrestrial ecosystem.

Microplastics and PFAS air-water interaction and deposition

Although microplastics (MPs) and per- and polyfluoroalkyl substances (PFAS) have received tremendous attention separately, understanding their ubiquitous presence in the environment, persistence and toxicity requires comprehensive study of the fate and transport of co-existing MPs and PFAS. MPs may have large sorption capacity and can serve as vectors for PFAS to undergo long-range transport in water. Atmospheric deposition of both PFAS and MPs has been reported in urban, rural, and remote areas. This review identifies types and levels of PFAS and MPs in air, their interactions, and environmental factors contributing to their air-water deposition. MPs in combination with PFAS may carry combined toxicity and pose elevated risks to ecosystems and human health. Our review shows that air-water deposition of MPs and PFAS can be governed by environmental factors including precipitation, humidity, UV, wind, and particulate matter levels in the air. Increasing humidity may increase MP particle size due to hygroscopic growth, which affects its distribution and deposition rate. Humidity has been observed to have both positive and negative impacts on PFAS partitioning onto MPs. More attention should be paid to MPs and PFAS co-occurrence when addressing their transport behavior in air and deposition to aquatic systems.

Environmental occurrence and ecotoxicological risks of plastic leachates in aquatic and terrestrial environments

Plastic pollution poses a significant threat to environmental and human health, with microplastics widely distributed across various ecosystems. Although current ecotoxicological studies have primarily focused on the inherent toxicity of plastics in natural environments, the role of chemical additives leaching from plastics into the environment remains underexplored despite their significant contribution to the overall toxic potential of plastics. Existing systematic studies on plastic leachates have often examined isolated additive compounds, neglecting the ecotoxicological effects of multiple compounds present in plastic leachates. Additionally, most previous research has focused on aquatic environments, overlooking the leaching mechanisms and ecological risks to diverse species with various ecological roles in aquatic and terrestrial ecosystems. This oversight hinders comprehensive ecological risk assessments. This study addresses these research gaps by reviewing the environmental occurrence of plastic leachates and their ecotoxicological impacts on aquatic and terrestrial ecosystems. Key findings reveal the pervasive presence of plastic leachates in various environments, identifying common additives such as phthalates, polybrominated diphenyl ethers (PBDEs), bisphenol A (BPA), and nonylphenols (NPs). Ecotoxicologically, chemical additives leaching from plastics under specific environmental conditions can influence their bioavailability and subsequent uptake by organisms. This review proposes a novel ecotoxicity risk assessment framework that integrates chemical analysis, ecotoxicological testing, and exposure assessment, offering a comprehensive approach to evaluating the risks of plastic leachates. This underscores the importance of interdisciplinary research that combines advanced analytical techniques with ecotoxicological studies across diverse species and environmental conditions to enhance the understanding of the complex impacts of plastic leachates and inform future research and regulatory policies.

Review of key issues and potential strategies in bio-degradation of polyolefins

Polyolefins are the most widely used plastic product and a major contributor to white pollution. Currently, studies on polyolefin degradation systems are mainly focused on microorganisms and some redox enzymes, and there is a serious black-box phenomenon. The use of polyolefin-degrading enzymes is limited because of the small number of enzymes; in addition, the catalytic efficiency of these enzymes is poor and their catalytic mechanism is unclear, which leads to the incomplete degradation of polyolefins to produce microplastics. In this review, three questions are addressed: the generation and degradation of action targets that promote the degradation of polyolefins, the different modes by which enzymes bind substrates and their application scenarios, and possible multienzyme systems in a unified system. This review will be valuable for mining or modifying polyolefin degradation enzymes and constructing polyolefins degradation systems and may provide novel ideas and opportunities for polyolefin degradation.

Novel insights into photoaging mechanisms and environmental persistence risks of polylactic acid (PLA) microplastics: Direct and indirect photolysis

Polylactic acid (PLA), as a biodegradable plastic, exhibits high sensitivity to ultraviolet (UV) radiation, yet the mechanisms and environmental risks of its photoaging remain unclear. This study uses quantum chemical calculations (DFT and TD-DFT) and kinetic simulations to explore the direct and indirect photoaging of PLA. Direct photoaging indicates that the highest oscillator intensity absorption peaks occurred at 172 and 246 nm, corresponding to the 13th singlet (S13) and 48th triplet (T48) states, thereby initiating the Norrish I and Norrish II mechanisms. The innovative "electron-hole" technology effectively clarifies the variations in photoaging mechanisms under different wavelengths. Indirect photoaging involves multiple reactive oxygen species (ROS) like •OH, 1O2, •O2-, and •HO2. The study confirms the anhydride production hypothesis and proposes two novel •OH-induced mechanisms: carbonyl carbon addition and branched methyl hydrogen dehydrogenation. Both mechanisms are thermodynamically advantageous, but their products pose potential environmental risks. ROS species and concentrations impact both PLA's photoaging mechanisms and environmental persistence. Low •OH concentration in northeast China, especially in winter, suggests a significant photoaging risk. This study offers pioneering insights into photoaging mechanisms and emphasizes the pivotal role of ROS, offering recommendations for managing PLA environmental impacts and fates in China.

Insights into the inhibitory effects of trichloroisocyanuric acid disinfectant on the phototransformation of polypropylene microplastics

The chemical components in the natural aquatic environment have the potential to be involved in phototransformation of microplastics (MPs). Little information is available regarding the mediation effects of artificially introduced chemicals on MP phototransformation, especially those used in aquaculture water that are vulnerable to human interference. Herein, this study investigated the phototransformation process and mechanism of polypropylene microplastic (PP MPs) in presence of trichloroisocyanuric acid (TCCA) disinfectant with unique properties unlike the conventional inorganic chlorine disinfectants. The results showed that the presence of TCCA inhibited the surface photooxidation of PP MPs. Analysis of PP MP surface and reaction filtrate indicated that the inhibitory effects were likely derived from TCCA derivatives and the weakening in promoting effect of polypropylene microplastic-derived dissolved organic matter (PP-DOM) as photolytic byproducts, with the more important role of free chlorine in initial period and that of other chlorine species (i.e., the adsorbed chloride ions (Cl-), newly formed carbon-chlorine (CCl) bonds, chlorinated cyanurates, and chlorinated products) in middle and later period. The study highlights for the first time the important role of chlorine species derived from TCCA in phototransformation process of co-existed PP MPs and proposes a previously unrecognized phototransformation pathway, which will provide a new understanding and knowledge for the environmental behavior of MPs in aquaculture environment.

Photoaged tire wear particles hinder the transport of Pb(II) in urban soils under acid rain: Experimental and numerical investigations

Rapid urbanization brought lots of serious environmental contamination, including the accumulation of heavy metals, acid rain, and the emission of tire wear particles (TWPs), with detrimental effects for terrestrial ecosystems. Nevertheless, how naturally aged TWPs affect the mobilization of heavy metals in soils under acid rain is still unclear. Here, we investigate the adsorption and transport mechanisms of Pb(II) co-existing with acid rainwater in soil-TWP mixtures via batch experiments, column experiments and modeling. Results showed that photoaged TWP significantly prolonged the Pb(II) adsorption equilibrium time (1 to 16 h) and enhanced the Pb(II) adsorption capacity of soils. Soil column profiles confirmed that TWP effectively boosted the initial accumulation of lead in the topsoil and thus impeded the downward transport of lead. The retardation factor (R) estimated by the linear two-site sorption model (TSM) fitting the Pb(II) breakthrough curves gradually increased from 1.098 to 16.38 in soils with TWP (0-10 %). Comparative results of linear or nonlinear TSM suggested nonlinear sorption replacing linear sorption as the main Pb(II) sorption mechanism under 1 % and 10 % TWP. This research provides significant insights into the implications of TWP on the Pb(II) retention behaviors and highlights the severer potential remobilization risks of Pb(II) in urban soils under different acid rain environments.

Remediation of biochar-supported effective microorganisms and microplastics on multiple forms of nitrogenous and phosphorous in eutrophic lake

Lots of studies on eutrophication, but there is a lack of comprehensive research on the repair of multiple forms of nitrogen and phosphorus under combined heavy metals (HMs) pollution. This work investigated the various forms of nitrogen and phosphorus in the water-sediment systems of eutrophic lakes with the application of biochar, Effective Microorganisms (EMs) and microplastics, aiming to deliberate the repair behavior of multiple forms of nitrogen/phosphorus and the integrated repairment of these nutrients and HMs in different remediations. For amended-groups, the application of biochar-supported EMs (BE) achieved the most desirable remediation for removing nitrogen, phosphorus and HMs in water and improved their stability in sediment due to the improved microbial activity and the developed biofilm system created by biochar. The addition of aging microplastics (MP) obviously reduced the systematic levels of nitrogen, phosphorus and HMs due to the stimulation of microbial activity and the adsorption of biofilm/EPS, but its high movability also increased the Fe(II) and S(-II) levels and the pollutants' ecological risks in sediment. The co-application of BE and MP (MBE) destroyed the ecosystem and decreased the removal of nitrogen and phosphorus, while greatly removing HMs by the superfluous biofilms/EPS. The application of biochar (BC) preferentially adsorbed and degraded dissolved nitrogen and phosphorus, releasing HMs into water. From these amended-groups, it's also knew that the removal of nitrogen and phosphorus mainly came from the degradation/assimilation of NH3-N, SRP and dissolved matters, particularly those molecular weight below 3 kDa; the higher removal of phosphorus than nitrogen was attributed to the coprecipitation of Fe-S-P hydroxides and the adsorption of particulates; however, the colloidal (3-100 kDa) nitrogen and phosphorus had low accessibility and bioavailability, and it also showed the competitive adsorption with colloidal HMs, causing their relatively low removal in water. This study provides insight into the comprehensive repair of nitrogen, phosphorus and HMs in various forms by biochar-immobilized microbes and the influence of microplastics on nutrients and HMs in eutrophic lakes.

Mechanistic inferences from empirical and LSER modeling approaches concerning sorption of organic compounds by pristine and aged PE microplastics

This study investigates the effect of aging of polyethylene (PE) microplastics (MP) on its interaction with organic compounds (OCs). Initially, pristine PE MPs were subjected to UV-aging, followed by characterization of their chemical structure and thermal properties. UV-aging resulted in formation of new functional groups such as carbonyl (CO), -OH, and unsaturation, along with changes in crystallinity and melting temperature. Complimentary sorption experiments were conducted with a suite of environmentally significant and structurally related OCs i.e., phenol, 2,3,6-trichlorophenol, triclosan, 1,1,2,2-tetrachloroethane, tetrachloroethylene and hexachloroethane, using pristine and UV-aged PE MPs. In addition to the distribution coefficients (i.e., KPEW) obtained experimentally, relevant data from the literature was also gathered for the purpose of developing a poly-parametric linear free energy relationship (pp-LFER) model. Two models were developed for predicting sorption onto: (i) only UV-aged PE, yielding an R2 = 0.96, RMSE = 0.19 (n = 16), (ii) PE that has undergone various types of aging, yielding an R2 = 0.83, RMSE = 0.68 (n = 36). Lastly, a direct comparison was performed between two pp-LFERs developed for the interaction of the same OCs with pristine vs. aged PE (n = 7). In addition to the predictive strength, the system coefficients enabled mechanistic inferences to be made; such that while molecular volume or non-specific hydrophobic interactions govern OC-pristine PE interactions, polar interactions and H-bonding also play important roles for OC-aged PE interactions. Overall, findings suggested that changes of MP surfaces under environmentally relevant aging conditions indicated an impact on their interactions with OCs in the environment.

From microplastics to pixels: testing the robustness of two machine learning approaches for automated, Nile red-based marine microplastic identification

Despite the urgent need for accurate and robust observations of microplastics in the marine environment to assess current and future environmental risks, existing procedures remain labour-intensive, especially for smaller-sized microplastics. In addition to this, microplastic analysis faces challenges due to environmental weathering, impacting the reliability of research relying on pristine plastics. This study addresses these knowledge gaps by testing the robustness of two automated analysis techniques which combine machine learning algorithms with fluorescent colouration of Nile red (NR)-stained particles. Heterogeneously shaped uncoloured microplastics of various polymers-polyethylene (PE), polyethylene terephthalate (PET), polypropylene (PP), polystyrene (PS), and polyvinyl chloride (PVC)-ranging from 100 to 1000 µm in size and weathered under semi-controlled surface and deep-sea conditions, were stained with NR and imaged using fluorescence stereomicroscopy. This study assessed and compared the accuracy of decision tree (DT) and random forest (RF) models in detecting and identifying these weathered plastics. Additionally, their analysis time and model complexity were evaluated, as well as the lower size limit (2-4 µm) and the interoperability of the approach. Decision tree and RF models were comparably accurate in detecting and identifying pristine plastic polymers (both > 90%). For the detection of weathered microplastics, both yielded sufficiently high accuracies (> 77%), although only RF models were reliable for polymer identification (> 70%), except for PET particles. The RF models showed an accuracy > 90% for particle predictions based on 12-30 pixels, which translated to microplastics sized < 10 µm. Although the RF classifier did not produce consistent results across different labs, the inherent flexibility of the method allows for its swift adaptation and optimisation, ensuring the possibility to fine-tune the method to specific research goals through customised datasets, thereby strengthening its robustness. The developed method is particularly relevant due to its ability to accurately analyse microplastics weathered under various marine conditions, as well as ecotoxicologically relevant microplastic sizes, making it highly applicable to real-world environmental samples.

Binding between Cu2+/Zn2+ and aged polyethylene and polyethylene terephthalate microplastics in swine wastewaters: Adsorption behavior, and mechanism insights

Microplastics (MPs) have aroused growing environmental concerns due to their biotoxicity and vital roles in accelerating the spread of toxic elements. Illuminating the interactions between MPs and heavy metals (HMs) is crucial for understanding the transport and fate of HM-loaded MPs in specific environmentally relevant scenarios. Herein, the adsorption of copper (Cu2+) and zinc (Zn2+) ions over polyethylene (PE) and polyethylene terephthalate (PET) particulates before and after heat persulfate oxidation (HPO) treatment was comprehensively evaluated in simulated and real swine wastewaters. The effects of intrinsic properties (i.e., degree of weathering, size, type) of MPs and environmental factors (i.e., pH, ionic strength, and co-occurring species) on adsorption were investigated thoroughly. It was observed that HPO treatment expedites the fragmentation of pristine MPs, and renders MPs with a variety of oxygen-rich functional groups, which are likely to act as new active sites for binding both HMs. The adsorption of both HMs is pH- and ionic strength-dependent at a pH of 4-6. Co-occurring species such as humic acid (HA) and tetracycline (TC) appear to enhance the affinity of both aged MPs for Cu2+ and Zn2+ ions via bridging complexation. However, co-occurring nutrient species (e.g., phosphate and ammonia) demonstrate different impacts on the adsorption, improving uptake of Cu2+ by precipitation while lowering affinity for Zn2+ owing to the formation of soluble zinc-ammonia complex. Spectroscopic analysis indicates that the dominant adsorption mechanism mainly involves electrostatic interactions and surface complexation. These findings provided fundamental insights into the interactions between aged MPs and HMs in swine wastewaters and might be extended to other nutrient-rich wastewaters.

Assessment of microplastic and heavy metal pollution in agricultural soils of Ernakulam District, Kerala, India

Microplastics (MPs) and heavy metal pollution pose significant environmental threat, potentially leading to agroecosystem toxicity and jeopardizing food security. Therefore, this study aims to evaluate the abundance and risk assessment of these pollutants in five different farmlands of Ernakulam district, India. Results showed that MPs content in agricultural fields near commercialized areas such as Kakkanad Nedungapuzha, Nedumbassery, and Kadamakuddy was dominant compared to Nechoor, a rural area. The average microplastic abundance was found to be 45.6 ± 26.4 items kg⁻1 dw. Polypropylene (PP) and polyethylene (PE) were the dominant polymers found in the soil samples, constituting 45% and 25% of the microplastic content, respectively. The pollution load index of MPs indicates that the sampling sites are considered to be polluted as PLI > 1 with hazard level I. The heavy metal pollution status follows the order: Cu (80.3 to 724 mg/kg) > Zn (77 to 543.5 mg/kg) > Cr (171.65 to 334.65 mg/kg) > As (10.25 to 79.5 mg/kg) > Pb (2.05 to 30.3 mg/kg) > Cd (0.3 to 14.35 mg/kg). Calculated pollution load index (PLI) geo-accumulation index (Igeo), ecological risk assessment values indicate that commercialized regions exhibit high levels of trace metals, namely Cu, Zn, As, Cd, and Cr, posing a significant concern for the agricultural ecosystem. Our results indicate heightened microplastics and heavy metals prevalence in farmlands adjacent to commercial zones, necessitating immediate preventive action to mitigate increasing concentrations.

Advancing the Understanding of Microplastic Weathering: Insights from a Novel Polarized Light Scattering Approach

Weathering is a significant process that alters the properties of microplastics (MPs) and consequently affects their environmental behaviors. In this study, we introduced a novel approach based on polarized light scattering technique, which offers advantages in terms of rapid, high-throughput, and submicron-sized detection. This technique was successfully applied to characterize the weathered MPs after a 180-day laboratory simulation of coastal environments. By employing polarization measurements, we obtained a 46-dimensional matrix data set for the weathered MP fragments and subsequently processed them using a backpropagation neural network. The successful extraction of effective polarization pulses confirmed the presence of MP fragments within the size range of 0.2-60 μm, yielding total accuracies for size classification ranging from 78.9 to 86.9%. Furthermore, this technique achieved an overall accuracy of 93.8% in classifying MPs with different weathering degrees and polymer types, revealing polarization parameters associated with size and morphological changes play a dominant role in characterizing the weathering process of MPs. Compared with conventional approaches, the novel polarized light scattering approach holds great promise for rapid, high-throughput, and accurate characterization of MPs with small sizes. The findings of this study provided new insights into how MPs change after long-term weathering in aquatic environments.

Tracing Microplastic Aging Processes Using Multimodal Deep Learning: A Predictive Model for Enhanced Traceability

The aging process of microplastics (MPs) affects their surface physicochemical properties, thereby influencing their behaviors in releasing harmful chemicals, adsorption of organic contaminants, sinking, and more. Understanding the aging process is crucial for evaluating MPs' environmental behaviors and risks, but tracing the aging process remains challenging. Here, we propose a multimodal deep learning model to trace typical aging factors of aged MPs based on MPs' physicochemical characteristics. A total of 1353 surface morphology images and 1353 Fourier transform infrared spectroscopy spectra were achieved from 130 aged MPs undergoing different aging processes, demonstrating that physicochemical properties of aged MPs vary from aging processes. The multimodal deep learning model achieved an accuracy of 93% in predicting the major aging factors of aged MPs. The multimodal deep learning model improves the model's accuracy by approximately 5-20% and reduces prediction bias compared to the single-modal model. In practice, the established model was performed to predict the major aging factors of naturally aged MPs collected from typical environment matrices. The prediction results aligned with the aging conditions of specific environments, as reported in previous studies. Our findings provide new insights into tracing and understanding the plastic aging process, contributing more accurately to the environmental risk assessment of aged MPs.

Treatment of polyethylene microplastics degraded by ultraviolet light irradiation causes lysosome-deregulated cell death

BACKGROUND

Microplastics (MPs), plastic particles < 5 mm in size, are prevalent in the environment, and human exposure to them is inevitable. To assess the potential risk of MPs on human health, it is essential to consider the physicochemical properties of environmental MPs, including polymer types, size, shape, and surface chemical modifications. Notably, environmental MPs undergo degradation due to external factors such as ultraviolet (UV) rays and waves, leading to changes in their surface characteristics. However, limited knowledge exists regarding the health effects of MPs, with a specific focus on their surface degradation. This study concentrates on cytotoxic MPs with surface degradation through UV irradiation, aiming to identify the mechanisms underlying their cell toxicity.

RESULTS

Polyethylene (PE) and surface-degraded PE achieved through UV light irradiation were employed as model MPs in this study. We explored the impact of PE and degraded PE on cell death in murine macrophage cell line RAW264.7 cells and human monocyte cell line THP-1 cells. Flow cytometric analysis revealed that degraded PE induced programmed cell death without activating caspase 3, while non-degraded PE did not trigger programmed cell death. These findings suggest that degraded PE might induce programmed cell death through mechanisms other than caspase-driven apoptosis. To understand the mechanisms of cell death, we investigated how cells responded to degraded PE-induced cellular stress. Immunofluorescence and western blotting analyses demonstrated that degraded PE induced autophagosome formation and increased p62 expression, indicating inhibited autophagy flux after exposure to degraded PE. Furthermore, degraded PE exposure led to a decrease in acidic lysosomes, indicating lysosomal dysregulation. These results imply that degraded PE induces lysosomal dysfunction, subsequently causing autophagy dysregulation and cell death.

CONCLUSIONS

This study unveils that UV-induced degradation of PE results in cell death attributed to lysosomal dysfunction. The findings presented herein provide novel insights into the effects of surface-degraded MPs on biological responses.

Microplastics in the soil-water-food nexus: Inclusive insight into global research findings

Nuisance imposed by biotic and abiotic stressors on diverse agroecosystems remains an area of focus for the scientific fraternity. However, emerging contaminants such as microplastics (MP) have imposed additional dimension (alone or in combinations with other stressors) in agroecosystems and keep escalating the challenges to achieve sustainability. MP are recognized as persistent anthropogenic contaminants, fetch global attention due to their unique chemical features that keeps themselves unresponsive to the decaying process. This review has been theorized to assess the current research trends (along with possible gap areas), widespread use of MP, enhancement of the harshness of heavy metals (HMs), complex interactions with physico-chemical constituents of arable soil, accumulation in the edible parts of field crops, dairy products, and other sources to penetrate the food web. So far, the available review articles are oriented to a certain aspect of MP and lack a totality when considered from in soil-water-food perspective. In short, a comprehensive perspective of the adverse effects of MP on human health has been assessed. Moreover, an agro-techno-socio-health prospective-oriented critical assessment of policies and remedial measures linked with MP has provided an extra edge over other similar articles in influential future courses of research.

Aged Microplastics and Antibiotic Resistance Genes: A Review of Aging Effects on Their Interactions

Background: Microplastic aging affects the dynamics of antibiotic resistance genes (ARGs) on microplastics, yet no review presents the effects of microplastic aging on the associated ARGs. Objectives: This review, therefore, aims to discuss the effects of different types of microplastic aging, as well as the other pollutants on or around microplastics and the chemicals leached from microplastics, on the associated ARGs. Results: It highlights that microplastic photoaging generally results in higher sorption of antibiotics and ARGs due to increased microplastic surface area and functional group changes. Photoaging produces reactive oxygen species, facilitating ARG transfer by increasing bacterial cell membrane permeability. Reactive oxygen species can interact with biofilms, suggesting combined effects of microplastic aging on ARGs. The effects of mechanical aging were deduced from studies showing larger microplastics anchoring more ARGs due to rough surfaces. Smaller microplastics from aging penetrate deeper and smaller places and transport ARGs to these places. High temperatures are likely to reduce biofilm mass and ARGs, but the variation of ARGs on microplastics subjected to thermal aging remains unknown due to limited studies. Biotic aging results in biofilm formation on microplastics, and biofilms, often with unique microbial structures, invariably enrich ARGs. Higher oxidative stress promotes ARG transfer in the biofilms due to higher cell membrane permeability. Other environmental pollutants, particularly heavy metals, antibacterial, chlorination by-products, and other functional genes, could increase microplastic-associated ARGs, as do microplastic additives like phthalates and bisphenols. Conclusions: This review provides insights into the environmental fate of co-existing microplastics and ARGs under the influences of aging. Further studies could examine the effects of mechanical and thermal MP aging on their interactions with ARGs.

Wet oxidation technology can significantly reduce both microplastics and nanoplastics

For the resource recovery of biomass waste, it is a challenge to simultaneously remove micro-/nano-plastics pollution but preserve organic resources. Wet oxidation is a promising technology for valorization of organic wastes through thermal hydrolysis and oxidation. This might in turn result in the degradation of microplastics in the presence of oxygen and high temperatures. Based on this hypothesis, this study quantified both microplastics and nanoplastics in an industrial-scale wet oxidation reactor from a full-size coverage perspective. Wet oxidation significantly reduced the size and mass of individual microplastics, and decreased total mass concentration of microplastics and nanoplastics by 94.8 % to 98.6 %. This technology also reduced the micro- and nanoplastic shapes and polymer types, resulting in a complete removal of fibers, clusters, polypropylene (PP) and poly(methyl methacrylate) (PMMA). The present study confirms that wet oxidation technology is effective in removing microplastics and nanoplastics while recovering organic waste.

Experimental detection of marine plastic litter in surface waters by 405 nm LD-based fluorescence lidar

Plastic pollution has become a global challenge, affecting water quality and health. Plastics including polystyrene (PS), polyvinyl chloride (PVC), polypropylene (PP), polyethylene terephthalate (PET), and high-density polyethylene (HDPE), are significant contributors to environmental pollution. With the growing need for investigation and detection of plastics found in natural waters, we propose the use of a portable laser diode (LD)-based fluorescence lidar system for in-situ detection of plastic litters in surface waters based on excitation-emission fluorescence spectroscopic data. The experiments were carried out in a controlled environment using a fluorescence lidar system with 405 nm excitation wavelength to determine the fluorescence signals of several plastics at 470 nm emission wavelength. Simultaneous detection of PET plastic and Chlorella vulgaris were also observed to determine the fluorescence influence of chlorophyll in surface waters. Attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy was employed to study the chemical composition of the plastics used before and after being submerged in the water. Scanning electron microscopy (SEM) and high-resolution camera microscopy were used to analyze the morphology of the submerged PET samples. This study provides a basis for a new in-situ technique using a fluorescence lidar system for submerged or transparent plastics in surface waters.