A unified theory for extracellular polymeric substances, soluble microbial products, and active and inert biomass

Effects of salinity on anaerobic digestion: Performance, microbial physiology, and community dynamics

Anaerobic digestion (AD) is widely applied to treatment and energy recovery from organic wastewater/wastes, while the efficiency of AD can be limited by salinity stress. This paper reviews the effects of salinity on AD. First of all, the effects of salinity on AD performance were compared, revealing that methane production is more susceptible to salinity stress. Secondly, the influence of salinity on microbial physiology and intracellular molecules was examined, demonstrating that salinity stress reduces the activity of key enzymes and increases the concentration of extracellular polymeric substances during AD. Thirdly, variations in microbial community structure under salinity stress were discussed, with archaeal communities showing more significant restructuring, including reduced dominance of acetoclastic methanogens. At last, strategies to mitigate salinity inhibition were presented, along with prospects for future research directions. This review provides theoretical guidance for engineering applications and strategies for enhancing AD in treating saline substrates.

Unraveling the mechanism of fouling mitigation in AGS-MBR system: From AGS properties to foulant interactions

Aerobic granular sludge (AGS) has demonstrated a lower fouling propensity than floc sludge in membrane bioreactors (MBRs) due to various hypotheses, including differences in particle size and the efficacy of physical scouring. However, controversy exists regarding the dominant cause of this lower fouling. Therefore, in this work, we systematically investigated the contribution of four potential mechanisms of AGS on membrane fouling alleviation in MBRs: 1) loosening cake layer; 2) scouring of the membrane surface; 3) regulating soluble microbial product (SMP) secretion; and 4) changing the rheology of the bulk solution. Our results showed that, regardless of granular size range, AGS hardly caused cake fouling due to its low hydraulic resistances (<0.8 × 1012 m-1) and limited accumulation on the membrane surface. Scouring by AGS was ineffective in reducing the thickness and hydraulic resistance of the fouling layer compared with granular activated carbon, a commonly used scouring material for MBRs. Furthermore, liquid chromatography-organic carbon detection-organic nitrogen detection (LC-OCD-OND) results indicated that the lower fouling was related to reduced SMP secretion by AGS, with an optimal particle size (800-1000 μm) at which SMP secretion was minimized. AGS with this optimal particle size secreted over 54 % less high-molecular-weight SMP compared to floc sludge. As granule size further increased, SMP secretion increased due to biomass decay and cell lysis resulting from substrate transfer limitations in granules. Moreover, compared to floc sludge, granular sludge bulk solution exhibited lower viscosity, particularly in the 450-1000 μm size range. This enhanced rheological behavior could potentially improve shear stress induced by aeration, thereby mitigating membrane fouling. These findings emphasize that the indirect effects of AGS, including reduced SMP secretion and improved rheological properties, played a crucial role in the lower membrane fouling in AGS-MBRs, while direct effects such as loosening cake layer and the scouring effect played minor roles.

Community succession and protein enhancement in a mixed methanotroph-microalgae system with stepwise increase of ammonium loading - Inhibition and adaptation

The integration of methanotrophs and microalgae in coculture systems presents a promising approach for sustainable biogas valorization and single-cell protein (SCP) production, offering dual benefits of greenhouse gas mitigation and nutrient recovery from waste streams. However, the resilience and metabolic interplay of these consortia under ammonium stress, common in industrial wastewater, remain poorly understood, limiting their scalability. This study systematically investigated the performance of a microalgae-methanotroph consortium under stepwise ammonium concentrations (130, 200 and 260 mg NH4+-N/L). The system demonstrated remarkable acclimation, achieving stable biogas conversion with 95.8 ± 5.3 mg CO2-C/(L·day) and 109.0 ± 11.4 mg CH4-C/(L·day) even at highest ammonium concentration. The SCP content increased from 32 % to over 52 % of cell dry weight with yield peaking at 90 mg/(L·day) under 200 mg N/L. A microbial community shift from Methylosinus to ammonia-tolerant Methylococcus dominance underpinned functional stability. Metagenomic analyses revealed ammonium-driven metabolic adaptations: extracellular substance secretion reprograms under stress, nitrogen assimilation was enhanced via glutamine synthetase, and antioxidant defenses were activated. Network analysis highlighted intensified competition (31 % negative correlations) under stress, yet key synergies within coculture system sustained carbon and nitrogen metabolism. These findings resolve knowledge gaps in ammonium-stressed consortia dynamics and provide insights for engineering systems to advancing the circular bioeconomy.

Analysis of microbial methane oxidation capacity of landfill soil cover using quorum sensing

Landfill gas (LFG) has become the second-largest anthropogenic source of methane (CH4) emissions globally. CH4 is the second most significant greenhouse gas after carbon dioxide (CO2), thus it is crucial to mitigate the methane emission of landfills. The soil in landfill cover layers is rich in methane-oxidizing bacteria (MOB), which use CH4 as their sole carbon and energy source. However, during the microbial methane oxidation process, the oxidation rate tends to decrease over time. It is anticipated that extracellular polymeric substance (EPS) is one of the key factors governing the reduction in the methane oxidation rate. Furthermore, the quorum sensing (QS) is responsible to regulate the production of EPS in the microbial system. To clarify the mechanism of QS in controlling the microbial methane oxidation rate, laboratory experiments were conducted to study the correlations between the oxidation rate of MOB, the EPS content and the concentration of AHLs signaling molecules and to elucidate the regulatory mechanism of the QS on the microbial methane oxidation rate. The following conclusions were drawn: It is observed that the EPS produced by MOB can inhibit their methane oxidation rate. The addition of AHLs increases the EPS content produced by MOB. It is postulated that in the QS system of MOB, AHLs signaling molecules stimulate production of EPS, and its accumulation inhibits methane oxidation rate of MOB. Thus, the QS would provide a new perspective for the mitigation measures for methane emission in landfills.

Combining quorum quenching by Rhodococcus sp. BH4 and Acinetobacter sp. DKY-1 to control biofouling in membrane bioreactors

This study investigates a novel approach to mitigate biofouling in membrane bioreactors (MBRs) using a combinational quorum quenching (QQ) strategy. Rhodococcus sp. BH4 and Acinetobacter sp. DKY-1 were employed to disrupt intraspecies N-acyl-homoserine lactones (AHL) and interspecies autoinducer-2 (AI-2) quorum sensing, respectively. BH4 and DKY-1 were immobilized independently and the antibiofouling effects of single QQ beads and 1: 1 mixed QQ beads, both with the same final doses, were compared. While both bead types exhibited high QQ activity, the mixed QQ beads more effectively inhibited microbial biofilm formation, delaying biofouling by two times compared to 1.5 and 1.7 times for the single species beads. Additionally, the mixed QQ MBR demonstrated significantly lower extracellular polymeric substances and a notable reduction in the genus Nitrospira. This combined QQ strategy presents a promising method for enhancing antibiofouling performance in MBRs through targeted disruption of microbial communication.

Insight into the effect of Tubificidae on dynamic membrane reactor: Membrane fouling mitigation and Tubificidae-ASM3-dynamic membrane coupled model

To gain insights into the effects of Tubificidae on dynamic membrane sequencing batch reactor (DMSBR), 4 identical DMSBRs were operated with different Tubificidae densities (i.e., 0, 1, 2, 3 g ww/L). Experimental results showed that Tubificidae had a minimal effect on carbon and nitrogen removal but varied effluent turbidity and sludge characteristics. An appropriate density (2 g ww/L) of Tubificidae significantly decreased effluent turbidity and mitigated membrane fouling, which was attributed to the minimized mixed liquor suspended solids (MLSS) and the maximized particle size. A Tubificidae-ASM3-dynamic membrane coupled model was developed by combining the biological model with the dynamic membrane resistance model, incorporating the extracellular polymeric substances (EPS) to characterize its contribution to membrane pore fouling, and introducing an inhibitory function to limit the unrestricted growth of membrane resistance. The model can be considered as a first attempt to describe the observed Tubificidae effects on dynamic membrane reactor.

Microbial extracellular polymeric substances in the environment, technology and medicine

Microbial biofilms exhibit a self-produced matrix of extracellular polymeric substances (EPS), including polysaccharides, proteins, extracellular DNA and lipids. EPS promote interactions of the biofilm with other cells and sorption of organics, metals and chemical pollutants, and they facilitate cell adhesion at interfaces and ensure matrix cohesion. EPS have roles in various natural environments, such as soils, sediments and marine habitats. In addition, EPS are relevant in technical environments, such as wastewater and drinking water treatment facilities, and water distribution systems, and they contribute to biofouling and microbially influenced corrosion. In medicine, EPS protect pathogens within the biofilm against the host immune system and antimicrobials, and emerging evidence suggests that EPS can represent potential virulence factors. By contrast, EPS yield a wide range of valuable products that include their role in self-repairing concrete. In this Review, we aim to explore EPS as a functional unit of biofilms in the environment, in technology and in medicine.

Enhancement of microalgae co-cultivation self-settling performance and water purificationcapacity of microalgae biofilm

Cultivating microalgae for the remediation of aquaculture wastewater provides a promising solution for pollution control. However, the economic viability of this approach faces challenges due to the high costs associated with microalgal biomass harvesting. This study aims to address this issue by immobilizing microalgae onto coral velvet carriers, enhancing the efficiency of biomass recovery. Four types of microalgae were screened: Chlorella sp., Isochrysis galbana, Chaetoceros sp., and Nannochloropsis sp. Among them, Isochrysis galbana exhibited the best self sedimentation rate, achieving a self sedimentation rate of 94.36%. Chlorella sp. demonstrated the best denitrification rate, with a nitrate removal rate of 100% and an inorganic nitrogen removal rate of 79.13%. In addition, this study found that extracellular polymeric substances(EPS) affects the self-settling performance of microalgae, and the results emphasize the key role of tightly-bound EPS(TB-EPS) content in determining self settling efficiency. Furthermore,the assessments of the purification of simulated aquaculture wastewater were conducted, comparing the outcomes of co-cultivation with mono-culture. The co-cultivation strategy showed exceptional efficacy, achieving a 100% removal rate for NO3--N by the 5th day. In contrast, mono-cultures of Chlorella sp. and Isochrysis galbana showed removal rates of 77.76% and 45.72%, respectively, at the same interval. Applying of the co-cultivation microalgal biofilm to treat the actual aquaculture wastewater showed remarkable denitrification performance, attaining a 100% removal rate for NO3--N by the 7th day. The study proposes the co-cultivation of Chlorella sp. and Isochrysis galbana for treating aquaculture wastewater and explores the potential application of immobilization technology to remove nitrogen-containing pollutants.

Visualization of Syntrophic Benzene-Fermenting Desulfobacterota ORM2 in a Methanogenic Enrichment Culture Using Fluorescence In Situ Hybridization

Benzene degradation under anoxic conditions was first reported more than 25 years ago; however, the activation mechanism in the absence of oxygen remains elusive. Progress has been hindered by the difficulty in cultivating anaerobic benzene-degrading enrichment cultures. Our laboratory has sustained a methanogenic enrichment culture harboring Desulfobacterota ORM2, a benzene fermenter distinct from any known genus but related to other known or predicted benzene degraders. ORM2's slow doubling time (∼30 days) and extended lag phase after inoculation complicate its study. We developed a fluorescent in situ hybridization (FISH) probe for ORM2, revealing rod-shaped cells of variable length that tend to cluster with other organisms, particularly methanogens. Microscopy and genomic evidence suggest that ORM2 may produce extracellular polymeric substances, facilitating cell aggregation and possibly consuming energy that contributes to the lag phase. Interestingly, higher benzene concentrations (90-120 mg/L) appeared to reduce cell aggregation. This study visualized the cells of Desulfobacterota ORM2 within a methanogenic community, offering insights into spatial organization and potential strategies to enhance its growth rate.

Enhanced chloramphenicol biodegradation and sustainable electricity generation via co-cultured electroactive biofilms modified with in-situ self-assembled gold nanoparticles and reduced graphene oxide

Bioelectrochemical technology emerges as a promising approach for addressing the challenge of antibiotic residue contamination. This research innovated by incorporating in-situ self-assembled gold nanoparticles (Au-NPs) and reduced graphene oxide (rGO) into a co-cultured electroactive biofilm (EAB) of Raoultella sp. DB-1 and Shewanella oneidensis MR-1 (Au-rGO@R/S-C). Supported by the rGO scaffold, the embedding of Au-NPs at key intercellular sites, and the adhesion of extracellular polymeric substance (EPS), the Au-rGO@R/S-C EAB enhanced the bioelectrochemical performance of the inoculated microbial fuel cell (MFC), with a 34.4% increase in the maximum voltage output and a 1.95-fold rise in the maximum power density, enabling the complete degradation of 100 mg/L chloramphenicol within 24 h. Notably, the Au-rGO@R/S-C EAB adapted to increased chloramphenicol stress by amplifying EPS secretion, especially with an elevated protein/polysaccharide ratio. Further analysis indicated a positive correlation between excessive production of EPS, particularly the increase in tightly bound EPS, and the stability in balancing the self-protection and extracellular electron transfer efficiency of the Au-rGO@R/S-C EAB under environmental stress. Our findings present a crucial strategy for the rational engineering of EABs, leveraging their dual potential in both environmental remediation and clean energy production.

Effective organic matter removal via bio-adsorption prior to anammox process and utilization of carbon-rich sludge

Excessive organic matter in the anaerobic ammonia oxidation (Anammox) leads to the growth of a large number of heterotrophic bacteria, which disrupts the anaerobic ammonia oxidation. The adsorption-anaerobic ammonia oxidation process can effectively reduce excessive organic matter, capturing it instead of consuming it, which is a sustainable development technology. In this study, utilizing the excellent adsorption performance of aerobic granular sludge (AGS), an adsorption-regeneration process was employed to remove organic matter at the front end of the Anammox process through bio-adsorption in an artificial simulated domestic sewage environment, and it was successfully used for denitrification. Stirring rate is a key factor affecting sludge granulation. As a parallel experiment of sludge granulation, two Sequencing Batch Reactors (SBRs) (R1 and R2) were operated simultaneously at different stirring rates. After 153 days, the particle size of the two reactors was analyzed, revealing that the proportion of particles larger than 200 μm was over 50%, and granular sludge was successfully formed in both reactors. Long-term operational results indicate that at a temperature of 16.5 ± 1 °C, varying initial pH levels (6.5, 6.7, 7.2, and 8.5) significantly affect the removal efficiency of chemical oxygen demand (COD). COD is rapidly adsorbed and removed within a short period. Among the tested initial pH values, a pH of 6.7 yielded the best total chemical oxygen demand (tCOD) removal efficiency, achieving up to 95%. Additionally, the study examined the effects of different carbon sources on denitrification, revealing that under carbon-rich conditions, the denitrification rate was highest, reaching 1.44 mg N/(g VSS·h). Compared to endogenous denitrification, the denitrification rate increased by 40%, and the nitrate (NO₃⁻-N) removal efficiency reached 100%.

Insight into the performance and fouling characteristics of submerged ceramic membrane bioreactor in wastewater treatment

Submerged membrane bioreactor (SMBR) is a promising technology in municipal wastewater treatment, but the membrane fouling has restricted its development. In this study, an integrated submerged ceramic membrane bioreactor (C-SMBR) was constructed to treat domestic wastewater, and the characteristics of membrane fouling and the microbial community structure were investigated. The results showed that the average removal efficiencies of COD, TN, NH4+-N reached 94.97%, 61.69% and 71.61% respectively, under different ammonia nitrogen loading rate (NLR). The increase of soluble microbial products (SMP) and extracellular polymeric substances (EPS) in the suspension jointly accelerated the membrane fouling process, resulting in an increase in the trans-membrane pressure (TMP), which led to membrane fouling. Microbial community structure analysis showed that the dominant phylum bacteria were Patescibacteria, Proteobacteria, Actinobacteria, Bacteroidota and Chloroflexi, and the dominant class bacteria were Saccharimonadia, γ-proteobacteria, Actinobacteria, Bacteroidia, Anaerolineae, α-proteobacteria, etc. In summary, the conditions, microbial information and membrane fouling characteristics of wastewater treated by C-SMBR obtained in this study can provide reference and data support for further promotion and improvement of the application of C-SMBR and membrane fouling control.

Differential inhibition of tire wear particles on sludge dewatering by aging modes

The study assessed the acute toxicities of tire wear particles (TWPs) on activated sludge, comparing cryogenically ground TWPs (C-TWPs) with photo-aged (PA-TWPs), ozone-aged (OA-TWPs), and Fenton-aged (FA-TWPs) variants over 96 h. At 0.1 mg/L, TWPs showed no significant effects on sludge respiration or purification. However, at 50 mg/L, significant impacts on respiration, decontamination capacity, and microbial community structure were observed, particularly in aged TWPs. Specifically, aged TWPs, especially FA-TWPs, are prone to inducing necrosis by generating non-cellular reactive oxygen species (ROS) catalyzed by persistent free radicals, leading to an increase in lactate dehydrogenase release ranging from 215 % to 284 %. Conversely, C-TWPs tend to trigger apoptosis via intracellular ROS accumulation, leading to a 358 % increase in intracellular ROS. Aged TWPs exhibited higher affinities for proteins and polysaccharides, while C-TWPs preferred phospholipids. All TWPs adversely affected sludge dewatering, with strong correlations found between specific resistance to filtration (SRF) and total protein (r = 0.981, p < 0.001) and between bound water and early cell apoptosis (r = 0.961, p < 0.01). Additionally, a correlation between SRF and cellular necrosis (r = 0.956, p < 0.01) was noted, linked to increased protein and extracellular polymeric substance levels. These results emphasize substantial influence of aged TWPs on sludge dewatering efficiency via diverse bacterial cell death mechanisms.

Unveiling the common laws of extracellular polymeric substances (EPS) properties on short-chain fatty acids production from sludge by EPS disintegration pretreatment

The production of short-chain fatty acids (SCFAs) from sludge is promising, but the efficiency and product quality often vary because of extracellular polymeric substances (EPS) characteristics and pretreatment principles. This study adopted specific EPS disintegration pretreatment to treat different types of sludge. By correlation coefficient matrix analysis and correlation dynamics change resolution, the intrinsic relationships between the nature of EPS and the production of SCFAs from sludge was unveiled. We demonstrate that tight-bound EPS (TB-EPS) is a principal carbon reservoir, positively impacting SCFAs yields, in the fermentation system with EPS as the main fermentation substrate, it can contribute about 29.2 % for SCFAs growth during fermentation. Conversely, TB-EPS exhibits a negative correlation during fermentation due to EPS-SCFAs interconversion, while loosely bound EPS (LB-EPS) correlates positively. Proteins and polysaccharides in TB-EPS, especially proteins, significantly enhance individual SCFAs yields, predominantly acetic, propionic, and isovaleric acids. The findings would provide a theoretical basis for developing pretreatments and process-control technologies aimed at improving SCFAs production efficiency and quality.

Characteristics of dissolved organic matter and their role in membrane fouling during simultaneous sludge thickening and reduction using flat-sheet membranes

Four parallel simultaneous sludge thickening and reduction reactors using flat-sheet membranes were employed for the aerobic digestion of sludge to explore the characteristics of dissolved organic matter and its membrane fouling effect. During the initial 8 days of using flat-sheet membranes for simultaneous sludge thickening and reduction (MSTR), a notable increase was observed in the concentrations of humic acids and compounds that resemble soluble microbial by-products in the effluent. Subsequently, a fluctuating trend in humic acid levels ensued, accompanied by a gradual decline in soluble microbial by-product-like substances. Post the initial 8-day period, the capillary suction time (CST) rose from approximately 400 s to over 800 s, the viscosity increased from 20 mPa s to 38 mPa s, and the membrane resistance increased from roughly 6.0e+ 11 m-1 to approximately 9.0e+11 m-1. This phenomenon can be attributed to the clogging of pores by foulants whose size is similar to that of the membrane pores leading to the accumulation and deposition of macromolecules and larger particulates forming gel layers and cake layers. The interplay among diverse microorganisms engenders functional modules, collectively influencing the distribution and characteristics of dissolved organic matter within the MSTR. These microorganisms exert their metabolic effects individually and interact reciprocally, creating synergistic and inhibitory mechanisms. Notably, the synergistic interactions among microorganisms predominated, culminating in an enhanced effluent quality within the system.

Insights into the individual and combined effects of Cu(Ⅱ) and Ni(Ⅱ) on anammox: Nitrogen removal performance, enzyme activity and microbial community

Anaerobic ammonium oxidation (anammox) is an efficient and economical nitrogen removal process for treating ammonium-rich industrial wastewaters. However, Cu(Ⅱ) and Ni(Ⅱ) present in industrial wastewaters are toxic to anaerobic ammonium-oxidizing bacteria (AnAOB). Unfortunately, the effects of Cu(Ⅱ) and Ni(Ⅱ) on anammox have not been thoroughly investigated, especially when Cu(Ⅱ) and Ni(Ⅱ) coexist. This work comprehensively investigated the individual and combined effects of Cu(Ⅱ) and Ni(Ⅱ) on anammox and revealed the inhibitory mechanisms. With the influent NH4+-N and NO2--N concentration of 230 and 250 mg L-1, the inhibition thresholds on anammox are 2.00 mg L-1 Cu(Ⅱ), 1.00 mg L-1 Ni(Ⅱ) and 1.00 mg L-1 Cu(Ⅱ) + 1.00 mg L-1 Ni(Ⅱ), and higher Cu(Ⅱ) or Ni(Ⅱ) concentrations resulted in sharp deteriorations of nitrogen removal performance. The inhibition of Ni(Ⅱ) on anammox was mainly attributed to the adverse effect on NiR activity, while the inhibition mechanism of Cu(Ⅱ) seemed to be unrelated to the four functional enzymes, but associated with disruption of cellular and organellar membranes. The behavior of extracellular polymeric substances (EPS) contributed to the antagonistic effect between Cu(Ⅱ) and Ni(Ⅱ) on anammox. In addition, the niche of Candidatus Brocadia and Candidatus Jettenia shifted under the Cu(II) and Ni(II) stress, and Candidatus Jettenia displayed greater tolerance to Cu(II) and Ni(II) stress. In conclusion, this research clarified the combined effect and the inhibitory mechanism of multiple heavy metals on anammox, and provide the guidances for anammox process application in treating high-ammonium industrial wastewaters containing heavy metals.

Operation parameters and temperature affected sludge microbial metabolisms: An integrated perspective considering extracellular polymeric substances, soluble microbial products, biomass quantities, and community shifts

Effluent soluble microbial products (SMP) and extracellular polymeric substances (EPS) are significant organics that pose challenges to advanced treatment processes. However, their production, transformation, and decomposition remain unclear due to their heterogeneity and the combined effects of environmental and operational factors. In this work, we investigated the impact of solids retention time (SRT), hydraulic retention time (HRT), and temperature on the changes in effluent SMP, with the consideration of the co-variation of EPS, sludge biomass, and community structures. Results show that longer SRT increased the biomass and relative abundance of functional microorganisms such as Myxococcota, Actinobacteria, and Terrimonas, which hindered EPS-to-SMP turnover and/or facilitated SMP consumption. This resulted in the accumulation of EPS and lower SMP concentrations at the beginning of the SRT adjustment. Both longer and shorter HRT (12 h and 8 h) led to increased SMP concentration, with the shorter HRT nearly doubling it (from approximately 6 to 12 mg/L), especially in terms of its protein and polysaccharide contents. Lower temperatures increased the SMP concentration and the relative abundance of Proteobacteria (including Zoogloea, the most dominant phylum and genus, relative abundance from 15.7 % to 61.1 %) while decreasing fluorescent EPS components, indicating the key role of Proteobacteria in SMP production and fluorescent EPS-to-SMP transformation. The results provided key insights into how changes in operational/environmental parameters impact sludge-EPS-SMP interactions, which could benefit the model development and operational optimization of activated sludge systems. This study also highlighted the important role of the sludge community in the EPS/SMP dynamics.

Correlative Effects on Nanoplastic Aggregation in Model Extracellular Biofilm Substances Investigated with Fluorescence Correlation Spectroscopy

Recent studies show that biofilm substances in contact with nanoplastics play an important role in the aggregation and sedimentation of nanoplastics. Consequences of these processes are changes in biofilm formation and stability and changes in the transport and fate of pollutants in the environment. Having a deeper understanding of the nanoplastics-biofilm interaction would help to evaluate the risks posed by uncontrolled nanoplastic pollution. These interactions are impacted by environmental changes due to climate change, such as, e.g., the acidification of surface waters. We apply fluorescence correlation spectroscopy (FCS) to investigate the pH-dependent aggregation tendency of non-functionalized polystyrene (PS) nanoparticles (NPs) due to intermolecular forces with model extracellular biofilm substances. Our biofilm model consists of bovine serum albumin (BSA), which serves as a representative for globular proteins, and the polysaccharide alginate, which is a main component in many biofilms, in solutions containing Na+ with an ionic strength being realistic for fresh-water conditions. Biomolecule concentrations ranging from 0.5 g/L up to at maximum 21 g/L are considered. We use non-functionalized PS NPs as representative for mostly negatively charged nanoplastics. BSA promotes NP aggregation through adsorption onto the NPs and BSA-mediated bridging. In BSA-alginate mixtures, the alginate hampers this interaction, most likely due to alginate-BSA complex formation. In most BSA-alginate mixtures as in alginate alone, NP aggregation is predominantly driven by weaker, pH-independent depletion forces. The stabilizing effect of alginate is only weakened at high BSA contents, when the electrostatic BSA-BSA attraction is not sufficiently screened by the alginate. This study clearly shows that it is crucial to consider correlative effects between multiple biofilm components to better understand the NP aggregation in the presence of complex biofilm substances. Single-component biofilm model systems based on comparing the total organic carbon (TOC) content of the extracellular biofilm substances, as usually considered, would have led to a misjudgment of the stability towards aggregation.

Quorum Quenching in Membrane Bioreactors for Fouling Retardation: Complexity Provides Opportunities

The occurrence of biofouling restricts the widespread application of membrane bioreactors (MBRs) in wastewater treatment. Regulation of quorum sensing (QS) is a promising approach to control biofouling in MBRs, yet the underlying mechanisms are complex and remain to be illustrated. A fundamental understanding of the relationship between QS and membrane biofouling in MBRs is lacking, which hampers the development and application of quorum quenching (QQ) techniques in MBRs (QQMBRs). While many QQ microorganisms have been isolated thus far, critical criteria for selecting desirable QQ microorganisms are still missing. Furthermore, there are inconsistent results regarding the QQ lifecycle and the effects of QQ on the physicochemical characteristics and microbial communities of the mixed liquor and biofouling assemblages in QQMBRs, which might result in unreliable and inefficient QQ applications. This review aims to comprehensively summarize timely QQ research and highlight the important yet often ignored perspectives of QQ for biofouling control in MBRs. We consider what this "information" can and cannot tell us and explore its values in addressing specific and important questions in QQMBRs. Herein, we first examine current analytical methods of QS signals and discuss the critical roles of QS in fouling-forming microorganisms in MBRs, which are the cornerstones for the development of QQ technologies. To achieve targeting QQ strategies in MBRs, we propose the substrate specificity and degradation capability of isolated QQ microorganisms and the surface area and pore structures of QQ media as the critical criteria to select desirable functional microbes and media, respectively. To validate the biofouling retardation efficiency, we further specify the QQ effects on the physicochemical properties, microbial community composition, and succession of mixed liquor and biofouling assemblages in MBRs. Finally, we provide scale-up considerations of QQMBRs in terms of the debated QQ lifecycle, practical synergistic strategies, and the potential cost savings of MBRs. This review presents the limitations of classic QS/QQ hypotheses in MBRs, advances the understanding of the role of QS/QQ in biofouling development/retardation in MBRs, and builds a bridge between the fundamental understandings and practical applications of QQ technology.

Impact of benzalkonium chloride on anaerobic granules and its long-term effects on reactor performance

This study assessed the inhibitory and performance-degrading effects induced by the cationic surfactant benzalkonium chloride (BAC) on anaerobic granules during the long-term operation of a laboratory-scale expanded granular sludge bed (EGSB) reactor. To address the critical scientific problem of how BAC affects the efficiency of EGSB reactors, this research uniquely evaluated the long-term stress response to BAC by systematically comparing continuous and discontinuous inhibitor exposure scenarios. The novel comparison demonstrated that inhibitor concentration is of minor relevance compared to the biomass-specific cumulative inhibitor load in the reactor. After exceeding a critical biomass-specific cumulative inhibitor load of 6.1-6.5 mg BAC/g VS, continuous and discontinuous exposure to BAC caused comparable significant deterioration in reactor performance, including accumulation of volatile fatty acids (VFA), decreased removal efficiency, reduced methane production, as well as the wash-out, flotation, and disintegration of anaerobic granules. BAC exposures had a more detrimental effect on methanogenesis than on acidogenesis. Moreover, long-term stress by BAC led to an inhibition of protein production, resulting in a decreased protein-to-polysaccharide ratio of extracellular polymeric substances (EPS) that promoted destabilizing effects on the granules. Finally, hydrogenotrophic methanogenesis was triggered. Reactor performance could not be restored due to the severe loss of granular sludge.

Deep insights into the biofilm formation mechanism and nitrogen-transformation network in a nitrate-dependent anaerobic methane oxidation biofilm

Nitrate/nitrite-dependent anaerobic methane oxidation (n-DAMO) process offers a promising solution for simultaneously achieving methane emissions reduction and efficient nitrogen removal in wastewater treatment. Although nitrogen removal at a practical rate has been achieved by n-DAMO biofilm process, the mechanisms of biofilm formation and nitrogen transformation remain to be elucidated. In this study, n-DAMO biofilms were successfully developed in the membrane aerated moving bed biofilm reactor (MAMBBR) and removed nitrate at a rate of 159 mg NO3--N L-1 d-1. The obvious increase in the content of extracellular polymeric substances (EPS) indicated that EPS production was important for biofilm development. n-DAMO microorganisms dominated the microbial community, and n-DAMO bacteria were the most abundant microorganisms. However, the expression of biosynthesis genes for proteins and polysaccharides encoded by n-DAMO archaea was significantly more active compared to other microorganisms, suggesting the central role of n-DAMO archaea in EPS production and biofilm formation. In addition to nitrate reduction, n-DAMO archaea were revealed to actively express dissimilatory nitrate reduction to ammonium and nitrogen fixation. The produced ammonium was putatively converted to dinitrogen gas through the joint function of n-DAMO archaea and n-DAMO bacteria. This study revealed the biofilm formation mechanism and nitrogen-transformation network in n-DAMO biofilm systems, shedding new light on promoting the application of n-DAMO process.

A systematic review of antibiotics and antibiotic resistance genes (ARGs) in mariculture wastewater: Antibiotics removal by microalgal-bacterial symbiotic system (MBSS), ARGs characterization on the metagenomic

Antibiotic residues in mariculture wastewater seriously affect the aquatic environment. Antibiotic Resistance Genes (ARGs) produced under antibiotic stress flow through the environment and eventually enter the human body, seriously affecting human health. Microalgal-bacterial symbiotic system (MBSS) can remove antibiotics from mariculture and reduce the flow of ARGs into the environment. This review encapsulates the present scenario of mariculture wastewater, the removal mechanism of MBSS for antibiotics, and the biomolecular information under metagenomic assay. When confronted with antibiotics, there was a notable augmentation in the extracellular polymeric substances (EPS) content within MBSS, along with a concurrent elevation in the proportion of protein (PN) constituents within the EPS, which limits the entry of antibiotics into the cellular interior. Quorum sensing stimulates the microorganisms to produce biological responses (DNA synthesis - for adhesion) through signaling. Oxidative stress promotes gene expression (coupling, conjugation) to enhance horizontal gene transfer (HGT) in MBSS. The microbial community under metagenomic detection is dominated by aerobic bacteria in the bacterial-microalgal system. Compared to aerobic bacteria, anaerobic bacteria had the significant advantage of decreasing the distribution of ARGs. Overall, MBSS exhibits remarkable efficacy in mitigating the challenges posed by antibiotics and resistant genes from mariculture wastewater.

Mechanism of microplastics effects on the purification of heavy metals in piggery effluents by microalgae

Microalgae is an effective bioremediation technique employed for treating piggery effluent. However, there is insufficient study on how the presence of microplastics (MPs) in wastewater affects the ability of microalgae to remove heavy metals from piggery effluent. This study aims to investigate the influence of two prevalent heavy metals found in piggery wastewater, Cu2+ (2 mg/L) and Zn2+ (2 mg/L), on their removal by microalgae (Desmodesmus sp. CHX1) in the presence of four types of MPs: polyethylene (PE), polyvinyl chloride (PVC), polypropylene (PP), and polyethylene terephthalate (PET). The results revealed that smaller particle size MPs promoted chlorophyll accumulation, while larger particles inhibits it. Additionally, higher concentrations of MPs promoted chlorophyll accumulation, while lower concentrations inhibited it. As for heavy metals, the presence of microplastics reduced the removal efficiency of Cu2+ and Zn2+ by Desmodesmus sp. CHX1. The highest inhibition of Cu2+ was 30%, 10%, 19%, and 16% of the control (CK), and the inhibition of Zn2+ was 7%, 4%, 4%, and 13%, respectively, under the treatments of PE, PVC, PP and PET MPs. Furthermore, Desmodesmus sp. CHX1 can secrete more extracellular polymeric substances (EPS) and form heterogeneous aggregates with MPs to counteract their pressure. These findings elucidate the impact of MPs on microalgae in bioremediation settings and offer useful insights into the complex relationships between microalgae, MPs, and heavy metals in the environment.

Evaluation of autotrophic process influencing extracellular polymeric substances in aerobic membrane bioreactor with expanded ASM model

A mathematical model was developed to predict the formation of both the autotrophic and heterotrophic extracellular polymeric substances (EPS) in the aerobic membrane bioreactor (MBR). Batch experimental results and 45-day operation data on a pilot MBR at a sludge retention time (SRT) of 20 d were used to calibrate and validate the model. Simulated MBR setup results demonstrated the key role of the influent COD and NH4+-N in governing the composition of heterotrophic and autotrophic EPS in the MBR. These results also revealed that the autotrophic EPS process was non-ignorable in the system. According to the autotrophic EPS simulation in the MBR, the EPS yield increased with increasing influent COD/NH4+-N ratio towards a constant level. The EPS yield was significantly influenced by the SRT, attributed to the autotrophic process's impact on EPS. Simulation results revealed a slight increase in EPS yield with an SRT of up to 5 days, followed by a rapid decrease beyond that threshold.

Acid etching post-treatment enhanced fungal sterilization performance of copper-manganese-cerium oxide in liquid and aerosol: Materials and molecular biological mechanisms

Bioaerosol is one of the main ways to spread respiratory infectious diseases. In order to further improve the sterilization efficiency of copper-manganese-cerium oxide (CuMnCeOx), the post-treatment method based on acid etching was adopted. The results showed that sterilization efficiency of the treated CuMnCeOx could reach 99% in aerosol with space velocity of 1400 h-1. L(+)-ascorbic acid successfully promoted the formation of Cu+, oxygen vacancies and the generation of reactive oxygen species (ROS) on the surface of the treated CuMnCeOx. During sterilization in liquid system, the transcriptome identified 316 differentially expressed genes, including 270 up-regulated genes and 46 down-regulated genes. Differentially expressed genes were significantly enriched in cell wall (GO:0005618) and external encapsulating structure (GO:0030312). Up-regulated genes were shown in regulation of reactive oxygen species biosynthetic processes (GO:1903409, GO:1903426, GO:1903428) and positive regulation all of reactive oxygen species metabolic process (GO:2000379), indicating that ROS induced cell death by destroying cell wall.

Electrochemical-coupled sulfur-driven autotrophic denitrification for nitrogen removal from raw landfill leachate: Evaluation of performance and mechanisms

The cost-effective and environment-friendly sulfur-driven autotrophic denitrification (SdAD) process has drawn significant attention for advanced nitrogen removal from low carbon-to-nitrogen (C/N) ratio wastewater in recent years. However, achieving efficient nitrogen removal and maintaining system stability of SdAD process in treating low C/N landfill leachate treatment have been a major challenge. In this study, a novel electrochemical-coupled sulfur-driven autotrophic denitrification (ESdAD) system was developed and compared with SdAD system through a long-term continuous study. Superior nitrogen removal performance (removal efficiency of 89.1 ± 2.5 %) was achieved in ESdAD system compared to SdAD process when treating raw landfill leachate (influent total nitrogen (TN) concentration of 241.7 ± 36.3 mg-N/L), and the effluent TN concentration of ESdAD bioreactor was as low as 24.8 ± 5.1 mg-N/L, which meets the discharge standard of China (< 40 mg N/L). Moreover, less sulfate production rate (1.3 ± 0.2 mg SO42--S/mgNOx--N vs 1.7 ± 0.2 mg SO42--S/mgNOx--N) and excellent pH modulation (pH of 6.9 ± 0.2 vs 5.8 ± 0.4) were also achieved in the ESdAD system compared to SdAD system. The improvement of ESdAD system performance was contributed to coexistence and interaction of heterotrophic bacteria (e.g., Rhodanobacter, Thermomonas, etc.), sulfur autotrophic bacteria (e.g., Thiobacillus, Sulfurimonas, Ignavibacterium etc.) and hydrogen autotrophic bacteria (e.g., Thauera, Comamonas, etc.) under current stimulation. In addition, microbial nitrogen metabolic activity, including functional enzyme (e.g., Nar and Nir) activities and electron transfer capacity of extracellular polymeric substances (EPS) and cytochrome c (Cyt-C), were also enhanced during current stimulation, which facilitated the nitrogen removal and maintained system stability. These findings suggested that ESdAD is an effective and eco-friendly process for advanced nitrogen removal for low C/N wastewater.

Biomass and hydrocarbon production from Botryococcus braunii: A review focusing on cultivation methods

Botryococcus braunii has garnered significant attention in recent years due to its ability to produce high amounts of renewable hydrocarbons through photosynthesis. As the world shifts towards a greener future and seeks alternative sources of energy, the cultivation of B. braunii and the extraction of its hydrocarbons can potentially provide a viable solution. However, the development of a sustainable and cost-effective process for cultivating B. braunii is not without challenges. Compared to other microalgae, B. braunii grows very slowly, making it time-consuming and expensive to produce biomass. In response to these challenges, several efforts have been put into optimizing Botryococcus braunii cultivation systems to increase biomass growth and hydrocarbon production efficiency. This review presents a comparative analysis of different Botryococcus braunii cultivation systems, and the factors affecting the productivity of biomass and hydrocarbon in Botryococcus braunii are critically discussed. Attached microalgal growth offers several advantages that hold significant potential for enhancing the economic viability of microalgal fuels. Here, we propose that employing attached growth cultivation, coupled with the milking technique for hydrocarbon extraction, represents an efficient approach for generating renewable fuels from B. braunii. Nevertheless, further research is needed to ascertain the viability of large-scale implementation.

Sewer sediment adhesion degeneration and gelatinous biopolymer deconstruction by structural cation chelation and alkaline macromolecule hydrolysis for improving hydraulic erosion

Sediment siltation has been regarded as the serious challenge in sewer system, which dominantly root in the gelatinous extracellular polymeric substance (EPS) structure and cohesive ability. Considering the crucial roles of divalent cation bridging and macromolecular biopolymer winding in sediment EPS formation and adhesive behavior, an innovative combination strategy of sodium pyrophosphate (SP)-mediated divalent cation chelation and alkaline biopolymer hydrolysis was developed to degenerate sediment adhesion. At the SP dosage of 0.25 g/g TS and the alkaline pH 12, the SP + pH 12 treatment triggered structural transformation of aromatic proteins (α-helix to β-turn) and functional group shifts of macromolecular biopolymers. In this case, the deconstruction and outward dissolution of gelatinous biopolymers were achievable, including proteins (tyrosine-like proteins, tryptophan-like proteins), humic acids, fulvic acids, polysaccharides and various soluble microbial products. These were identified as the major driving forces for sediment EPS matrix disintegration and bio-aggregation deflocculation. The extraction EPS content was obviously increased by 18.88 mg COD/g TS. The sediment adhesion was sensitive to EPS matrix damage and gelatinous biopolymer deconstruction, leading to considerable average adhesion degeneration to 0.98 nN with reduction rate of 78.32%. As such, the sediments could be disrupted into dispersive fragments with increased surface electronegativity and electric repulsion (up to -45.6 mV), thereby the sediment resistance to hydraulic erosion was impaired, providing feasibility for in-situ sediment floating and removal by gravity sewage flow in sewer.

Magnetite alleviating calcification of anaerobic granular sludge (AnGS): Electron transfer enhancement and ion competition

Calcification accompanied by deactivation of anaerobic granular sludge (AnGS) is a continuing challenge for high calcium wastewater treatment. The interaction between Ca2+ and extracellular polymeric substances (EPS) is a precondition for this problem. In this study, magnetite for activity recovery and calcification alleviation simultaneously of AnGS under high calcium stress was investigated. The results showed that, in the presence of magnetite, the relative biogas production increased by 13.2 % with the higher activities of key enzymes involved in methanogenesis. Methanosarcina turned into the dominant methanogens, and syntrophic bacteria such as Chloroflexi, Synergistota were enriched, which indicated the enhancement of electron transfer by magnetite, supported by an 18 % increase of the electron transfer system (ETS) activity. Further characterizations of AnGS suggested that the granule calcification was alleviated with a final decrease of 13-40 % calcium content of AnGS with particle size of 1-2.5 mm. Besides, calcium was partially substituted by iron in the EPS, and the secretion of EPS especially proteins decreased. Batch tests demonstrated the competition between Fe2+ dissolved from magnetite and Ca2+, which interfered the interaction between Ca2+ and EPS, so the granule calcification was prevented. Therefore, magnetite played a pluripotent role in the alleviation of granule calcification and deactivation in situ via (1) enhancing electron transfer, and (2) blocking the complex between Ca2+ and EPS. This study provides a novel insight into the application of conductive metal materials in biological wastewater treatment systems suffering from high calcium attack.

Insight into the role of chitosan in rapid recovery and re-stabilization of disintegrated aerobic granular sludge

The disintegration and instability of aerobic granular sludge (AGS) systems during long-term operation pose significant challenges to its practical implementation, and rapid recovery strategies for disintegrated AGS are gaining more attention. In this study, the recovery and re-stabilization of disintegrated AGS was investigated by adding chitosan to a sequencing batch reactor and simultaneously adjusting the pH to slightly acidic condition. Within 7 days, chitosan addition under slight acidity led to the re-aggregation of disintegrated granules, increasing the average particle size from 166.4 μm to 485.9 μm. Notably, sludge volume indexes at 5 min (SVI5) and 30 min (SVI30) decreased remarkably from 404.6 mL/g and 215.1 mL/g (SVI30/SVI5 = 0.53) to 49.1 mL/g and 47.6 mL/g (SVI30/SVI5 = 0.97), respectively. Subsequent operation for 43 days successfully re-stabilized previous collapsed AGS system, resulting in an average particle size of 750.2 μm. These mature and re-stabilized granules exhibited characteristics of large particle size, excellent settleability, compact structure, and high biomass retention. Furthermore, chitosan facilitated the recovery of COD and nitrogen removal performances within 17-23 days of operation. It effectively facilitated the rapid aggregation of disintegrated granules by charge neutralization and bridging effects under a slightly acidic environment. Moreover, the precipitated chitosan acted as carriers, promoting the adhesion of microorganisms once pH control was discontinued. The results of batch tests and microbial community analysis confirmed that chitosan addition increased sludge retention time, enriching slow-growing microorganisms and enhancing the stability and pollutant removal efficiency of the AGS system.

The formation, reactivity, and fate of oxygen-containing organic compounds in petroleum-contaminated groundwaters: A state of the science review and future research directions

Hydrocarbon (HC) contamination in groundwater (GW) is a widespread environmental issue. Dissolved hydrocarbons in water are commonly utilized as an energy source by natural microbial communities, which can produce water soluble intermediate metabolite compounds, herein referred to as oxygen containing organic compounds (OCOCs), before achieving complete mineralization. This review aims to provide a comprehensive assessment of the literature focused on the state of the science for OCOCs detected and measured in GW samples collected from petroleum contaminated aquifers. In this review, we discuss and evaluate two hypotheses investigating OCOC formation, which are major points of contention in the freshwater oil spill community that need to be addressed. We reviewed over 150 articles compiling studies investigating OCOC formation and persistence to uncover knowledge gaps in the literature and studies that recommend quantitative and qualitative measurements of OCOCs in petroleum-contaminated aquifers. This review is essential because no consensus exists regarding specific compounds and related concerns. We highlight the knowledge gaps to progressing the discussion of hydrocarbon conversion products.

Strategies to Promote the Journey of Nanoparticles Against Biofilm-Associated Infections

Biofilm-associated infections are one of the most challenging healthcare threats for humans, accounting for 80% of bacterial infections, leading to persistent and chronic infections. The conventional antibiotics still face their dilemma of poor therapeutic effects due to the high tolerance and resistance led by bacterial biofilm barriers. Nanotechnology-based antimicrobials, nanoparticles (NPs), are paid attention extensively and considered as promising alternative. This review focuses on the whole journey of NPs against biofilm-associated infections, and to clarify it clearly, the journey is divided into four processes in sequence as 1) Targeting biofilms, 2) Penetrating biofilm barrier, 3) Attaching to bacterial cells, and 4) Translocating through bacterial cell envelope. Through outlining the compositions and properties of biofilms and bacteria cells, recent advances and present the strategies of each process are comprehensively discussed to combat biofilm-associated infections, as well as the combined strategies against these infections with drug resistance, aiming to guide the rational design and facilitate wide application of NPs in biofilm-associated infections.

Modelling biofilm development: The importance of considering the link between EPS distribution, detachment mechanisms and physical properties

In industry, treatments against biofilms need to be optimized and, in the wastewater treatment field, biofilm composition needs to be controlled. Therefore, describing the biochemical and physical structures of biofilms is now required to better understand the influence of operating parameters and treatment on biofilms. The present study aims to investigate how growth conditions influence EPS composition, biofilm physical properties and volume detachment using a 1D biofilm model. Two types of EPS are considered in the present model, proteins and polysaccharides. The main hypotheses are that: (i) the production of polysaccharides occurs mainly under strong nutrient limitation(s) while the production of proteins is coupled to both the substrate uptake rate and the lysis process; (ii) the local biofilm porosity depends on the local biofilm composition. Both volume and surface detachment occur in biofilms and volume detachment extent depends on the biofilm local cohesion and thus on the local composition of biofilms for a given shear stress. The model is based on experimental trends and aims to represent these observations on the basis of biochemical and physical processes. Four case studies covering a wide range of contrasting growth conditions such as different COD/N ratios, applied SOLR and shear stresses are investigated. The model predicts how the biochemical and physical biofilm structures change as a result of contrasting growth conditions. More precisely simulation results are in good agreement with the main experimental observations reported in the literature, such as: (i) a strong nitrogen limitation of growth induces an important accumulation of polysaccharides leading to a more porous and homogenous biofilm, (ii) a high applied surface organic loading load allows to obtain a high biofilm thickness, (iii) a strong shear stress applied during the biofilm growth leads to a reduction of the biofilm thickness and to a consolidation of the biofilm structure. Overall, this model represents a relevant decision tool for the selection of appropriate enzymatic treatments in the context of negative biofilm control. From our results, it appears that protease based treatments should be more appropriate for biofilms developed under low COD/N ratios (about 20 gCOD/gN) whereas both glucosidases and proteases based treatments should be more appropriate for biofilms developed under high COD/N ratio (about 70 gCOD/gN). In addition, the model could be useful for other applications such as resource recovery in biofilms or granules, and help to better understand biological membrane fouling.

Response of antibiotic resistance genes expression and distribution on extracellular polymeric substances and microbial community in membrane biofilm during greywater treatment

This study evaluated how organic loading affects antibiotic resistance genes (ARGs) expression and distribution in the membrane biofilm. Organic surface loading rate of 4.65 g chemical oxygen demand (COD)/m2·d achieved the maximum biofilm thickness, concentration and linear alkylbenzene sulfonate (LAS) removal ratio of 136.9 ± 4.7 μm, 5.4 ± 0.1 g VSS/m2 and 99.4 %, respectively. Extracellular polymeric substances (EPS), EPS-attached LAS, and ARGs gradually increased in the membrane air inlet, middle and air outlet. AGRs and Intl1 were abundant in biofilm. LAS promoted EPS secretion, biofilm growth and ARGs proliferation. EPS, protein and carbohydrate were significantly correlated with most of biofilm ARGs, but not corrected with liquid-based ARGs. Microbial community structure impacted ARGs proliferation and transfer in the system. The findings indicated that EPS and microbial community play a crucial role in ARGs proliferation, spread and distribution, which lay the foundation for front-end control of ARGs during biofilm-based wastewater treatment.

Selenium bio-nanocomposite based on extracellular polymeric substances (EPS): Synthesis, characterization and application in alleviating cadmium toxicity in rice (Oryza sativa L.)

Selenium nanoparticles (SeNPs) have gained significant attention owing to their favorable bioavailability and low toxicity, making them widely applications in the fields of medicine, food and agriculture. In this study, bacterial extracellular polymeric substances (EPS) were used as a novel stabilizer and capping agent to prepare dispersed SeNPs. Results show that EPS-SeNPs presented negative potential (-38 mV), spherical morphologies with average particle size about 100-200 nm and kept stable at room temperature for a long time. X-ray diffraction (XRD) analysis demonstrated that the synthesized nanoparticles were pure amorphous nanoparticles, and X-ray photoelectron spectroscopy (XPS) spectrum showed a spike at 55.6 eV, indicating the presence of zero-valent nano‑selenium. Fourier-transform infrared spectroscopy (FTIR) and three-dimensional excitation-emission matrix (3D-EEM) fluorescence spectroscopy analysis confirmed proteins and polysaccharides in EPS played a crucial role in the synthesis of EPS-SeNPs. Compared to EPS or sodium selenite (Na2SeO3), EPS-SeNPs showed a relatively moderate result in terms of scavenging free radicals in vitro. In contrast, EPS-SeNPs demonstrated lower toxicity to rice seeds than Na2SeO3. Notably, the exogenous application of EPS-SeNPs effectively alleviated the growth inhibition and oxidative damaged caused by cadmium (Cd), and significantly reduced Cd accumulation in rice plants.

In-situ sewer sediment self-cleaning by plant ash-driven hydrolysis: Impairing adhesion and hydraulic erosion resistance from gelatinous biopolymer molecule deconstruction

The gelatinous structure and adhesion of sediments induced strong hydraulic erosion resistance and bottom siltation, which brought about serious challenges in sewer management. The in-situ sediment self-cleaning technology with low energy and labor consumption has become urgent demand. This study proposed an innovative plant ash-triggered molecule hydrolysis strategy for driving sewer sediment self-cleaning. Plant ash treatment at the optimal dosage of 0.10 g/g SS promoted molecular deconstruction and dissolution of aromatic proteins (tryptophan-like and tyrosine-like proteins), humic acids (fulvic acid-like and humic acid-like substances) and carbohydrates with secondary structure deflocculation (α-helix to β-turn), meanwhile numerous microbial cells were lysed, contributing to linkage breakage in extracellular polymeric substance (EPS). The gelatinous EPS disruption and outward migration with cohesion reduction were achievable. Sediment adhesion was vulnerable to EPS structural damage, which was degenerated by 91.14 %. Correspondingly, the sediment matrix structure was observably disintegrated into dispersive and small fragments, with increased surface electronegativity and eliminated adhesive bio-agglomeration. Thereby, the sensitivity of sediments to hydraulic erosion was greatly improved. In this case, substantial organic and inorganic sediment particles were solubilized and downstream transported by gravity sewage flow. Such plant ash-triggered hydrolysis provided a sustainable strategy for sediment self-cleaning in "waste control by waste" pattern, which improved sediment floating by 7.25-9.57 times. Considerable economic benefits of 35.56-123.46 CNY/(sewer meter length) were obtained compared with traditional mechanical flushing approaches. The findings might provide theoretical and engineering inspirations for solving sewer sediment issues.

Mass Flow and Metabolic Pathway of Nonaeration Greywater Treatment in an Oxygenic Microalgal-Bacterial Biofilm

A symbiotic microalgal-bacterial biofilm can enable efficient carbon (C) and nitrogen (N) removal during aeration-free wastewater treatment. However, the contributions of microalgae and bacteria to C and N removal remain unexplored. Here, we developed a baffled oxygenic microalgal-bacterial biofilm reactor (MBBfR) for the nonaerated treatment of greywater. A hydraulic retention time (HRT) of 6 h gave the highest biomass concentration and biofilm thickness as well as the maximum removal of chemical oxygen demand (94.8%), linear alkylbenzenesulfonates (LAS, 99.7%), and total nitrogen (97.4%). An HRT of 4 h caused a decline in all of the performance metrics due to LAS biotoxicity. Most of C (92.6%) and N (95.7%) removals were ultimately associated with newly synthesized biomass, with only minor fractions transformed into CO2 (2.2%) and N2 (1.7%) on the function of multifarious-related enzymes in the symbiotic biofilm. Specifically, microalgae photosynthesis contributed to the removal of C and N at 75.3 and 79.0%, respectively, which accounted for 17.3% (C) and 16.7% (N) by bacteria assimilation. Oxygen produced by microalgae favored the efficient organics mineralization and CO2 supply by bacteria. The symbiotic biofilm system achieved stable and efficient removal of C and N during greywater treatment, thus providing a novel technology to achieve low-energy-input wastewater treatment, reuse, and resource recovery.

Effects of organic matter and dewaterability changes on sludge calorific value during acid treatment

Acid treatment can increase the sludge calorific value to some extent by separating inorganic elements. In order to determine the mechanism by which acidification affects the sludge calorific value from an organic perspective, we investigated the changes in organic matter and dewaterability under different pH conditions. The results of this study showed that acidification conditioning retained organic matter while removing a greater amount of inorganic elements. Furthermore, acid treatment significantly increased the zeta potential and particle size of sludge particles and facilitated the precipitation of biological organic components from the supernatant to the surface of sludge particles. Acid-treated sludge exhibited a lower moisture content and a higher proportion of organic matter, and sludge treated with H2SO4, HCl, and HNO3 exhibited respective increases in calorific values of 12.14%, 7.92%, and 8.01% under pH 2. The calorific value of the acid-treated sludge was higher, making it more suitable for subsequent incineration. The findings of this study serve as a reference and foundation for efficient sludge incineration.

Production and composition of extracellular polymeric substances by a unicellular strain and natural colonies of Microcystis: Impact of salinity and nutrient stress

The transfer of toxic cyanobacterial Microcystis blooms from freshwater to estuaries constitutes a serious environmental problem worldwide that is expected to expand in scale and intensity with anthropogenic and climate change. The formation and maintenance of Microcystis in colonial form is conditioned to the presence of extracellular polymeric substances (EPS). In this study, we attempted to better understand how the mucilaginous colonial form of Microcystis evolves under environmental stress conditions. In particular, we studied and compared the production and the composition of EPS fractions (attached and free) from natural colonies of a Microcystis bloom and from a unicellular M. aeruginosa strain under salinity and nutrient stress (representing a land-sea continuum). Our results highlighted a greater production of EPS from the natural colonies of Microcystis than the unicellular one under nutrient and combined stress conditions dominated by the attached form. In comparison to the unicellular Microcystis, EPS produced by the colonial form were characterized by high molecular weight polysaccharides which were enriched in uronic acids and hexosamines, notably for the free fraction in response to increased salinities. This complex extracellular matrix gives the cells the ability to aggregate and allows the colonial cyanobacterial population to cope with osmotic shock.

Bioleaching of metals from spent fluid catalytic cracking catalyst using adapted Acidithiobacillus caldus

In this study, an adapted bioleaching strain of Acidithiobacillus caldus UVS10 was successfully developed. Batch tests and tests in bioreactor were conducted to evaluate the metals bioleaching performance of A. caldus UVS10 to spent FCC catalyst (SFCCC). Results of batch experiments showed the bioleaching efficiency of Ni, V, La, and Ce in SFCCC reached 19.40%, 22.06%, 53.75%, and 59.56%, respectively. High SFCCC pulp density inhibited the leaching of metals. Sb leaching was inhibited in acidic environment caused by A. caldus UVS10. Contents of Ni, V, La, and Ce in extracellular polymeric substances (EPS) were significantly higher than those intracellular. Accumulation of metal in EPS and cytosol increased with the increase of SFCCC pulp density. V was less intercepted by EPS than Ni, La, and Ce, because of lower toxicity. Experimental results in bioreactor showed that Ni, V, La, and Ce could be effectively leached by A. caldus UVS10 under 10% pulp density. The aeration and stirring operating environment in bioreactor improved the leaching efficiency of metals in SFCCC. After bioleached in bioreactor, the available fraction content of four metals in SFCCC decreased significantly. Ecological risk analysis demonstrated the environmental risks of bioleached SFCCC were significantly lower than raw SFCCC. Different reaction kinetic models were used to represent metals leaching behavior under bioleaching of A. caldus UVS10, leaching of La and Ce showed good agreement with the product layer diffusion model, while Ni and V leaching kinetics fit well with the surface chemical reaction models.

Effects of zinc ion concentrations on the performance of SBR treating livestock wastewater and analysis of microbial community

Zinc ion (Zn2+) is a frequently occurring heavy metal in livestock wastewater. The effects of Zn2+ on the physicochemical properties and the microbial distribution of activated sludge are essential to controlling nitrogen removal performance. Nevertheless, there are raw studies on the effects of Zn2+ on nitrogen removal. This study investigated the effect of Zn2+ on the treatment performance of livestock wastewater in a sequencing batch reactor (SBR). The results indicated the low Zn2+ concentrations could improve nitrogen removal performance. However, as the Zn2+ concentration increased, the total nitrogen (TN) removal performance of the reactor gradually deteriorated. When the Zn2+ concentration was 90.00 mg/L, the TN removal efficiency was the lowest, only 2.40%. The contents of the Extracellular polymeric substance (EPS) presented a trend of first increasing and then decreasing with the increase of Zn2+ concentration, and the main reason was the decrease of protein-like and tryptophan-like. The 16SrRNA analysis indicated that Zn2+ within a specific concentration could increase the operational taxonomic units (OTUs) number, microbial richness, and diversity of microorganisms in the SBR. However, with Zn2+ concentration exceeding 10.00 mg/L, the relative abundance of denitrification functional bacteria (Dechloromonas, Nitrospira, and Thauera) decreased.

Investigation of a membrane bioreactor's performances in treating sunflower oil refinery wastewater containing high oleic acid at different SRTs

This study investigated the MBR performance, sludge morphology, and membrane fouling potential in treating sunflower oil refinery wastewater containing high oleic acid at three different SRTs of 10 days, 40 days, and infinite. The analysis of mixed liquor morphology including sludge volume index, PSD, EPS, and SMP showed that the sludge flocs compressibility and bioflocculation considerably improved at 40-days SRT. Additionally, at this SRT, the mixed liquor O&G, COD, and SMP accumulation were low, and the microbial activity and COD removal were enhanced. The gas chromatography/mass spectrometry analysis results confirmed the formation of three different new compounds related to non-readily biodegradable recalcitrant oily compounds and SMP at all SRTs. The analysis of mixed liquor EPS, PSD, SMP, and effluent COD at three different SRTs suggests that under the industrial conditions of MBR operation treating SORW with high oleic acid, the optimal operating conditions are predicted to be at 40-days SRT.

Nitrogen source affects non-aeration microalgal-bacterial biofilm growth progression and metabolic function during greywater treatment

The non-aeration microalgal-bacteria symbiotic system has attracted great attention due to excellent pollutants removal performance and low greenhouse gas emission. This study investigated how nitrogen (N) sources (ammonia, nitrate and urea) impact biofilm formation, pollutants removal and microbial niches in a microalgal-bacterial biofilm. Results showed that functional genus and enzymes contributed to organics biodegradation and carbon fixation, N transformation and assimilation enabled efficient pollutants removal without CO2 emission. Urea achieved the maximum chemical oxygen demand (89.2%) and linear alkylbenzene sulfonates (95.3%) removal. However, Nitrate significantly influenced microbial community structure and enabled the highest removal of total N (89.7%). Multifarious functional groups enabled the fast adsorption of pollutants, which favored the continuous transformation and fixing of carbon and N. But N source significantly affects the carbon and N dissimilation and fixing pathways. This study offers a promising alternative method that achieving low-carbon-footprint and cost-saving greywater treatment.

Stress of cupric ion and oxytetracycline in Chlorella vulgaris cultured in swine wastewater

Chlorella culturing has the advantages in treatment of wastewater including swine wastewater from anaerobic digesters due to the product of biolipids and the uptake of carbon dioxide. However, there often exist high concentrations of antibiotics and heavy metals in swine wastewater which could be toxic to chlorella and harmful to the biological systems. This study examined the stress of cupric ion and oxytetracycline (OTC) at various concentrations on the nutrient removal and biomass growth in Chlorella vulgaris culturing in swine wastewater from anaerobic digesters, and its biochemical responses were also studied. Results showed that dynamic hormesis of either OTC concentration or cupric ion one on Chlorella vulgaris were confirmed separately, and the presence of OTC not only did not limit biomass growth and lipids content of Chlorella vulgaris but also could mitigate the toxicity of cupric ion on Chlorella vulgaris in combined stress of Cu2+ and OTC. Extracellular polymeric substances (EPS) of Chlorella vulgaris were used to explain the mechanisms of stress for the first time. The content of proteins and carbohydrates in EPS increased, and the fluorescence spectrum intensity of tightly-bound EPS (TB-EPS) of Chlorella vulgaris decreased with increasing concentration of stress because Cu2+ and OTC may be chelated with proteins of TB-EPS to form non-fluorescent characteristic chelates. The low concentration of Cu2+ (≤1.0 mg/L) could enhance the protein content and promote the activity of superoxide dismutase (SOD) while these parameters were decreased drastically under 2.0 mg/L of Cu2+. The activity of adenosine triphosphatase (ATPase) and glutathione (GSH) enhanced with the increase of OTC concentration under combined stress. This study helps to comprehend the impact mechanisms of stress on Chlorella vulgaris and provides a novel strategy to improve the stability of microalgae systems for wastewater treatment.

Biofilm bioactivity affects nitrogen metabolism in a push-flow microalgae-bacteria biofilm reactor during aeration-free greywater treatment

Non-aeration microalgae-bacteria biofilm has attracted increasing interest for its application in low cost wastewater treatment. However, it is unclear the quantified biofilm characteristics dynamics and how biofilm bioactivity affects performance and nitrogen metabolisms during wastewater treatment. In this work, a push-flow microalgae-bacteria biofilm reactor (PF-MBBfR) was developed for aeration-free greywater treatment. Comparatively, organic loading at 1.27 ± 0.10 kg COD/(m3⋅d) gave the highest biofilm concentration, density, specific oxygen generation (SOGR) and consumption rates (SOCR), and pollutants removal rates. Contributed to low residual linear alkylbenzene sulfonates and bioactivity, reactor downstream showed low bacteria and protein concentrations and SOCR (12.8 mg O2/g TSS·h), but high microalgae, carbohydrate, biofilm density, SOGR (49.4 mg O2/g TSS·h) and pollutants removal rates. Dissolved organic nitrogen (DON) showed higher molecular weight, CHONS and fraction with 4 atoms of N in reactor upstream. Most of nitrogen was fixed to newly synthesized biomass during assimilation process by related functional enzymes, minor contributed to denitrification due to low N2 emission. High nitrogen assimilation by microalgae showed high SOGR, which favored efficient multiple pollutants removal and reduced DON emission. Our findings favor the practical application of PF-MBBfR based on biofilm bioactivity, enhancing efficiency and reducing DON emission for low- energy-input wastewater treatment.

Role of Soil Biofilms in Clogging and Fate of Pharmaceuticals: A Laboratory-Scale Column Experiment

Contamination of groundwater with pharmaceutical active compounds (PhACs) increased over the last decades. Potential pathways of PhACs to groundwater include techniques such as irrigation, managed aquifer recharge, or bank filtration as well as natural processes such as losing streams of PhACs-loaded source waters. Usually, these systems are characterized by redox-active zones, where microorganisms grow and become immobilized by the formation of biofilms, structures that colonize the pore space and decrease the infiltration capacities, a phenomenon known as bioclogging. The goal of this work is to gain a deeper understanding of the influence of soil biofilms on hydraulic conductivity reduction and the fate of PhACs in the subsurface. For this purpose, we selected three PhACs with different physicochemical properties (carbamazepine, diclofenac, and metoprolol) and performed batch and column experiments using a natural soil, as it is and with the organic matter removed, under different biological conditions. We observed enhanced sorption and biodegradation for all PhACs in the system with higher biological activity. Bioclogging was more prevalent in the absence of organic matter. Our results differ from works using artificial porous media and thus reveal the importance of utilizing natural soils with organic matter in studies designed to assess the role of soil biofilms in bioclogging and the fate of PhACs in soils.

Biological processes modelling for MBR systems: A review of the state-of-the-art focusing on SMP and EPS

A mathematical correlation between biomass kinetic and membrane fouling can improve the understanding and spread of Membrane Bioreactor (MBR) technology, especially in solving the membrane fouling issues. On this behalf, this paper, produced by the International Water Association (IWA) Task Group on Membrane modelling and control, reviews the current state-of-the-art regarding the modelling of kinetic processes of biomass, focusing on modelling production and utilization of soluble microbial products (SMP) and extracellular polymeric substances (EPS). The key findings of this work show that the new conceptual approaches focus on the role of different bacterial groups in the formation and degradation of SMP/EPS. Even though several studies have been published regarding SMP modelling, there still needs to be more information due to the highly complicated SMP nature to facilitate the accurate modelling of membrane fouling. The EPS group has seldom been addressed in the literature, probably due to the knowledge deficiency concerning the triggers for production and degradation pathways in MBR systems, which require further efforts. Finally, the successful model applications showed that proper estimation of SMP and EPS by modelling approaches could optimise membrane fouling, which can influence the MBR energy consumption, operating costs, and greenhouse gas emissions.

Dispersive biofilm from membrane bioreactor strains: effects of diffusible signal factor addition and characterization by dispersion index

INTRODUCTION

Biofilm occurs ubiquitously in water system. Excessive biofilm formation deteriorates severely system performance in several water and wastewater treatment processes. Quorum sensing systems were controlled in this study with a signal compound cis-2-Decenoic acid (CDA) to regulate various functions of microbial communities, including motility, enzyme production, and extracellular polymeric substance (EPS) production in biofilm.

METHODS

The addition of CDA to six strains extracted from membrane bioreactor sludge and the Pseudomonas aeruginosa PAO1 strain was examined for modulating biofilm development by regulating DSF expression.

RESULTS AND DISCUSSION

As the CDA doses increased, optical density of the biofilm dispersion assay increased, and the decrease in EPS of the biofilm was obvious on membrane surfaces. The three-dimensional visual images and quantitative analyses of biofilm formation with CDA proved thinner, less massive, and more dispersive than those without; to evaluate its dispersive intensity, a dispersion index was proposed. This could compare the dispersive effects of CDA dosing to other biofilms or efficiencies of biofouling control practices such as backwashing or new cleaning methods.

Distribution and dynamics of antibiotic resistance genes in a three-dimensional multifunctional biofilm during greywater treatment

Antibiotic resistance genes (ARGs) have been identified as serious threats to public health. Despite the widespread in various systems, dynamics of ARGs in three-dimensional multifunctional biofilm (3D-MFB) treating greywater are largely undefined. This work tracked the distributions and dynamics of eight target genes (intI1, korB, sul1, sul2, tetM, ermB, bla_CTX-M and qnrS) in a 3D-MFB during greywater treatment. Results showed that hydraulic retention times at 9.0 h achieved the highest linear alkylbenzene sulfonate (LAS) and total nitrogen removal rates at 99.4% and 79.6%, respectively. ARGs presented significant liquid-solid distribution feature, but non-significant with biofilm position. Intracellular ARGs (predominant by intI1, korB, sul1 and sul2) at bottom biofilm were 210- to 4.2 × 10⁴- fold higher than that in cell-free liquid. Extracellular polymeric substances (EPS)-attached LAS showed linear relationship with most of ARGs (R² > 0.90, P < 0.05). Sphingobacteriales, Chlamydiales, Microthrixaceae, SB-1, Cryomorphaceae, Chitinophagaceae, Leadbetterella and Niabella were tightly bound up with target ARGs. Key is that EPS-attached LAS considerably determines the occurrence of ARGs, and microbial taxa play an important role in the dissemination of ARGs in the 3D-MFB.