The biodegradation of surfactants in the environment

Electroactive biofilters outperform inert biofilters for treating surfactant-polluted wastewater by means of selecting a low-growth yield microbial community

Electrobioremediation is one of the most innovative disciplines for treating organic pollutants and it is based on the ability of electroactive bacteria to exchange electrons with electroconductive materials. Electroactive biofilters have been demonstrated to be efficient for treating urban wastewater with a low footprint; however, their application can be expanded for treating industrial wastewater containing significant concentrations (2.4 %vol) of commercial surfactants (containing lauryl sulfate, lauryl ether sulfate, cocamydopropyl betaine, and dodecylbenzene sulfonate, among others). Our electroactive biofilter outperformed a conventional inert biofilter made of gravel for all tested conditions, reaching removal rates as high as 4.5 kg COD/m3bed·day and withstood Organic Loading Rates as high as 9 Kg COD/m3·d without significantly affecting removal efficiency. The biomass accumulation reduced available bed volume in the electroactive biofilter just by 39 %, while the gravel biofilter decreased by 80 %. Regarding microbial communities, anaerobic and electroactive bacteria represented a substantial proportion of the total population in the electroactive biofilter. Pseudomonas was the dominant genus, while Cupriavidus, Shewanella, Citrobacter, Desulfovibrio, and Arcobacter were potential electroactive strains found in relevant proportions. The microbial community's composition might be the key to understanding how high removal rates can coexist with limited biomass production, making electroactive biofilters a promising strategy to overcome classical biofilter limitations.

Comparative analysis of microbial community under acclimation of linear alkylbenzene sulfonate (LAS) surfactants and degradation mechanisms of functional strains

Linear alkylbenzene sulfonate (LAS) is one of the most widely used anionic surfactants and a common toxic pollutant in wastewater. This study employed high throughput sequencing to explore the microbial community structure within activated sludge exposed to a high concentration of LAS. Genera such as Pseudomonas, Aeromonas, Thauera and Klebsiella exhibited a significant positive correlation with LAS concentrations. Furthermore, Comamonas and Klebsiella were significantly enriched under the stress of LAS. Moreover, bacterial strains with LAS-degrading capability were isolated and characterized to elucidate the degradation pathways. The Klebsiella pneumoniae isolate L1 could effectively transform more than 60 % of 25 mg/L of LAS within 72 h. Chemical analyses revealed that L1 utilized the LAS sulfonyl group as a sulfur source to support its growth. Genomic and transcriptomic analyses suggested that strain L1 may uptake LAS through the sulfate ABC transport system and remove sulfonate with sulfate and sulfite reductases.

Effect of ethylene oxide groups on calcite wettability reversal by nonionic surfactants: An experimental and molecular dynamics simulation investigation

HYPOTHESIS

Ethoxylated nonionic surfactants are promising candidates for enhanced oil recovery (EOR) from oil-wet carbonate reservoirs due to their ability to reverse the mineral wettability. The wettability-reversal efficiency increases with the number of the ethoxy (EO) groups in the surfactant molecule.

METHODOLOGY

Contact angle measurements, scanning electron microscopy (SEM) and molecular dynamics (MD) simulations were combined to investigate the wettability reversal of an oil-wet calcite by three ethoxylated nonionic surfactants with 1, 4 and 8 EO groups, respectively, to directly probe the role of the EO groups and to uncover the molecular mechanism responsible for the wettability reversal.

FINDINGS

Both experiments and simulations consistently show a clear correlation between the number of EO groups and the wettability reversal efficiency of the surfactants, whereby the higher number of EO groups results in greater degree of wettability reversal. This is due to 1) the more hydrophilic surfactant headgroup weakening the carboxylate interactions with the surface by expanding the surface-adjacent water layer, and 2) the physically larger surfactant molecule attracting the carboxylates more strongly, thus aiding in their removal from the surface.

Molecular Dynamics Computational Study of Sustainable Green Surfactant for Application in Chemical Enhanced Oil Recovery

Green surfactant (GS) flooding, an environmentally friendly chemical Enhanced Oil Recovery (cEOR) method, is explored in this molecular dynamics (MD) simulation study. This study evaluates the ability of (S)-2-dodecanamido-aminobutanedioic as a GS for cEOR, assessing its performance with hexane (C6), dodecane (C12), and eicosane (C20) as representative oils. In the case of the bulk system, a comprehensive molecular-level investigation provides structural details such as the radial distribution function, solvent-accessible surface area, GS adsorption dynamics, diffusivity, and emulsion stability of the GS, oil, and water systems. Also the impact of the three distinct oils on interfacial tension was examined in the existence of GS molecules. The findings reveal rapid GS molecule aggregation and adsorption on oil droplets, with various impacts on emulsion stability depending on the oil type. Additionally, GS enhances the aggregation of heavy C20 oil molecules in a water medium. The study demonstrates GS's role as an effective emulsifier, facilitating oil droplet recovery, with electrostatic interactions governing micelle formation and van der Waals interactions influencing oil droplet emulsification. These results align with prior experimental data, affirming GS's promising application potential in cEOR while prioritizing environmental sustainability.

Degradation products and transformation pathways of sulfamethoxazole chlorination disinfection by-products in constructed wetlands

Antibiotics and available chlorine coexist in multiple aquatic environments, and thus antibiotics and their chlorinated disinfection by-products (Cl-DBPs) have been a great concern for the nature and human health. Herein, the degradation intermediates and transformation pathways of sulfamethoxazole (SMX) Cl-DBPs in constructed wetlands (CWs) were investigated. A total of five SMX Cl-DBPs and their twenty degradation products in CWs was identified in this study. SMX and its Cl-DBPs influenced the biodegradation rather than the adsorption process in CWs. S1 atom on sulfonyl group of SMX had the strongest nucleophilicity, and was most vulnerable for nucleophilic attack. N5 and N7 on amino groups, and C17 on the methyl group had great electronegativity, and were susceptible to electrophilic reactions. S1-N5 and S1-C8 bonds of SMX are the most prone to cleavage, followed by C11-N5, C16-C17, and C12-N7. The chlorination of SMX mainly occurred at S1, N5, and N7 sites, and went through S-C cleavage, S-N hydrolysis, and desulfonation. The biodegradation of SMX Cl-DBPs in CWs mainly occurred at S1, N5, N7, C8, and C17 sites, and went through processes including oxidation of methyl, hydroxyl and amino groups, desulfonation, decarboxylation, azo bond cleavage, benzene ring cleavage, β-oxidation of fatty acids under the action of coenzymes. Over half of the SMX Cl-DBPs had greater bioaccumulation potential than their parent SMX, but the environmental risk of SMX Cl-DBPs was effectively reduced through the degradation by CWs.

Mechanisms of the novel pesticide sodium dodecyl benzene sulfonate in the mitigation of protozoan ciliated pathogens during microalgal cultivation

Protozoan ciliates represent a common biological contaminant during microalgae cultivation, which will lead to a decline in microalgae productivity. This study investigated the effectiveness of sodium dodecyl benzene sulfonate (SDBS) in controlling ciliate populations within microalgae cultures. SDBS concentrations of 160 mg/L and 100 mg/L were found to effectively manage the representative species of ciliates contamination by Euplotes vannus and Uronema marinum during the cultivation of Synechococcus and Chlorella, and the growth vitality of microalgae has been restored. Additionally, SDBS at these concentrations reduced oxidative stress resistance and induced membrane damage to remove biological pollutants by modulating enzyme activity, affecting lipid, energy, amino acid metabolism pathways, and processes such as translation and protein folding. This research provides insights into the mechanisms through which SDBS effectively combats protozoan ciliates during the microalgal cultivation. This contributes to reduce biological pollution, ensure the overall productivity and healthy and sustainable management of microalgae ecosystems.

Transcriptomic changes in barley leaves induced by alcohol ethoxylates indicate potential pathways of surfactant detoxification

Hardly anything is known regarding the detoxification of surfactants in crop plants, although they are frequently treated with agrochemical formulations. Therefore, we studied transcriptomic changes in barley leaves induced in response to spraying leaf surfaces with two alcohol ethoxylates (AEs). As model surfactants, we selected the monodisperse tetraethylene glycol monododecyl (C12E4) ether and the polydisperse BrijL4. Barley plants were harvested 8 h after spraying with a 0.1% surfactant solution and changes in gene expression were analysed by RNA-sequencing (RNA-Seq). Gene expression was significantly altered in response to both surfactants. With BrijL4 more genes (9724) were differentially expressed compared to C12E4 (6197). Gene families showing pronounced up-regulation were cytochrome P450 enzymes, monooxygenases, ABC-transporters, acetyl- and methyl- transferases, glutathione-S-transferases and glycosyltransferases. These specific changes in gene expression and the postulated function of the corresponding enzymes allowed hypothesizing three potential metabolic pathways of AE detoxification in barley leaves. (i) Up-regulation of P450 cytochrome oxidoreductases suggested a degradation of the lipophilic alkyl residue (dodecyl chain) of the AEs by ω- and β- oxidation. (ii) Alternatively, the polar PEG-chain of AEs could be degraded. (iii) Instead of surfactant degradation, a further pathway of detoxification could be the sequestration of AEs into the vacuole or the apoplast (cell wall). Thus, our results show that AEs lead to pronounced changes in the expression of genes coding for proteins potentially being involved in the detoxification of surfactants.

Surfactants as biodegradable sustainable inhibitors for corrosion control in diverse media and conditions: A comprehensive review

BACKGROUND

Corrosion is a challenging and potentially harmful process that involves the continuing, impulsive deterioration of metallic structures via reactions involving environmental components and electro- or chemical processes. To inhibit corrosion, various additives are added. Traditional additives, on the other hand, contain environmentally hazardous substances. Surfactants are less expensive, easier to manufacture, and have high inhibitory efficacy and low toxicity compared to standard corrosion inhibitors. They are often employed as corrosion inhibitors to protect metallic materials against corrosion.

METHODS

Surfactant molecules' amphiphilic nature promotes adsorption at surfaces such as the metal/metal oxide-water interface. Surfactant adsorption on metals and metal oxides forms a barrier that can prevent corrosion.

SIGNIFICANT FINDINGS

This review of surfactants as corrosion inhibitors aims to offer a systemic evaluation of various surfactant physical and chemical properties, surfactant influence in corrosion inhibition, and surfactant used in corrosion inhibition that can be used to enhance the efficacy of surfactant use as corrosion inhibitors in a variety of environments. The effect of several parameters on the potential to suppress corrosion of surfactant molecule series is also discussed here.

Applications of Saponin Extract from Asparagus Roots as Functional Ingredient

When replanting an asparagus field, the roots of the previous crop are crushed and incorporated into the soil, creating problems of autotoxicity and fungal infections. Asparagus roots can be considered as a valuable byproduct, since they are very rich in saponins (3-6%), compounds currently considered as bio-emulsifiers. The objective is to evaluate the emulsifying and foaming capacity of a saponin extract from asparagus roots (ARS) and compare it with other commercial extracts. ARS was obtained using a process patented by our research group. The results have shown that ARS has activity similar to Quillaja extract. Its critical micellar concentration falls between that of Quillaja and Tribulus extracts (0.064, 0.043, and 0.094 g/100 mL, respectively). Both emulsifying and foaming activities are affected by pH, salt, and sucrose to a similar extent as the other extracts. Additionally, it has demonstrated an inhibitory effect on pancreatic lipase, which is even better than the other two studied extracts, as indicated by its IC50 value (0.7887, 1.6366, and 2.0107 mg/mL for asparagus, Quillaja, and Tribulus, respectively). These results suggest that ARS could serve as a natural emulsifying/foaming agent for healthier and safer food products and as a potential aid in treatments for obesity and hyperlipidemia.

Toxicity of Three Optical Brighteners: Potential Pharmacological Targets and Effects on Caenorhabditis elegans

Optical brighteners (OBs) have become an integral part of our daily lives and culture, with a growing number of applications in various fields. Most industrially produced OBs are derived from stilbene, which has been found in environmental matrices. The main objectives for this work are as follows: first, to identify protein targets for DAST, FB-28, and FB-71, and second, to assess their effects in some behaviors physiologic of Caenorhabditis elegans. To achieve the first objective, each OB was tested against a total of 844 human proteins through molecular docking using AutoDock Vina, and affinities were employed as the main criteria to identify potential target proteins for the OB. Molecular dynamics simulations took and validated the best 25 docking results from two protein databases. The highest affinity was obtained for the Hsp70-1/DAST, CD40 ligand/FB-71, and CD40 ligand/FB-28 complexes. The possible toxic effects that OBs could cause were evaluated using the nematode C. elegans. The lethality, body length, locomotion, and reproduction were investigated in larval stage L1 or L4 of the wild-type strain N2. In addition, transgenic green fluorescent protein (GFP) strains were employed to estimate changes in relative gene expression. The effects on the inhibition of growth, locomotion, and reproduction of C. elegans nematodes exposed to DAST, FB-71, and FB-28 OBs were more noticeable with respect to lethality. Moreover, an interesting aspect in OB was increased the expression of gpx-4 and sod-4 genes associated with oxidative stress indicating a toxic response related to the generation of reactive oxygen species (ROS). In all cases, a clear concentration-response relationship was observed. It is of special attention that the use of OBs is increasing, and their different sources, such as detergents, textiles, plastics, and paper products, must also be investigated to characterize the primary emissions of OBs to the environment and to develop an adequate regulatory framework.

Surfactant-Mediated Effects on Hydrological and Physical Soil Properties: Data Synthesis

Soils are under the threat of a multitude of anthropogenic factors affecting the complex interplay of various physical and hydrological soil processes and properties. One such factor is the group of surface-active compounds. Surfactants have a broad range of applications and can reduce solid-liquid interfacial forces and increase wettability and dispersion of particles. Surfactant effects are context-dependent, giving rise to a wide range of reported effects on different soil processes and properties. Here, we evaluate the evidence base of surfactant research on 11 hydrological and physical soil variables. Our goal was to identify knowledge gaps and test the robustness of the proposed surfactant effects. We found that the current knowledge base is insufficient to reach strong data-backed conclusions about the effects of surfactants in soils. We identified a unique case of bias in the data as a result of conflated patterns from laboratory and field studies. We could not support the hypothesis that the surfactant charge determines soil effects for any of the tested soil variables. We believe that further experiments on surfactant-mediated effects on soil properties and processes are urgently required, paying attention, in particular, to improving experimental design and data reporting standards.

Performance of volatile fatty acids production from food waste at the presence of alkyl ethoxy polyglycosides and sodium dodecyl sulfate

In the current context of technological and industrial development, strategies for sustainable development and resource utilization have become increasingly important. FW anaerobic fermentation (Fermentation of Wastes) is a process that utilizes organic waste for biotransformation and is widely used for the production of volatile fatty acids (VFAs). Volatile fatty acids (VFAs) are a kind of high value-added product generated from anaerobic fermentation process, and has extensive applications in chemical synthesis and electricity generation. This study investigated the performance of VFAs production from food waste at the presence of alkyl ethoxy polyglycosides (AEG) and sodium dodecyl sulfate (SDS). The highest yield of VFAs was obtained at 0.1 g AEG/g TS (14.53 g COD/L), which increased by 25.80% than the Blank. But inhibited phenomenon was observed at other reactors with relatively low yield and delayed fermentation time. The inhibition of lactate's production and bioconversion delayed the fermentation time, and SDS has changed the acidogenic fermentation type from lactate-butyrate fermentation to acetate fermentation. In addition, more organic matter dissolved in the fermentation liquor with the addition of AEG and SDS, but the hydrolysis and acidification of polysaccharide were inhibited to some extent. Microbial community analysis showed that the abundance of key bacteria Clostridium has significantly decreased from 82.71% (Blank) to 33.54% (AEG) and 23.72% (SDS), leading to low VFAs production performance.

A review on the fate and effects of contaminants in biosolids applied on land: Hazards and government regulatory policies

The increase in world population growth and its resultant increase in industrial production to meet its need, have continued to raise the volume of wastewater received by treatment plant facilities. This has expectedly, led to an upsurge in the volume of sewage sludge and biosolids generated from wastewater treatment systems. Biosolids are best managed by application on land because of their agronomic benefits. However, this usage has been discovered to negatively affect humans and impact the environment due to the accumulation of minute concentrations of contaminants still present in the biosolid after treatment, hence the need for government regulations. This review article examined the fate and effects of pollutants, especially persistent organic pollutants (PoPs) of concern and emerging contaminants found in biosolids used for land applications, and also discussed government regulations on biosolid reuse from the perspectives of the two major regulations governing biosolid land application-the EU's Sludge Directive and USEPA's Part 503 Rule, in an attempt to draw attention to their outdated contents since enactment, as they do not currently meet the challenges of biosolid land application and thus, require a comprehensive update. Any update efforts should focus on USEPA's Part 503 Rule, which is less stringent on the allowable concentration of biosolid pollutants. Furthermore, an update should include specific regulations on new and emerging contaminants and persistent organic pollutants (PoPs) such as microplastics, pharmaceutical and personal care products (P&PCPs), surfactants, endocrine-disrupting chemicals, flame retardants, pathogens, and organic pollutants; further reduction of heavy metal standard limits, and consideration of soil phosphate-metal interactions to regulate biosolid agronomic loading rate. Future biosolid research should focus on the concentration of TCS, TCC, and emerging pharmaceuticals, as well as Microplastic transport in biosolid-amended soils, soil-plant transfer mechanism, and metabolism of PFAs in the soils; all of which will inform government policies on biosolid application on land.

Biocompatible and Biodegradable Surfactants from Orange Peel for Oil Spill Remediation

Oil spill remediation plays a vital role in mitigating the environmental impacts caused by oil spills. The chemical method is one of the widely recognized approaches in chemical surfactants. However, the most commonly used chemical surfactants are toxic and non-biodegradable. Herein, two biocompatible and biodegradable surfactants were synthesized from orange peel using the ionic liquid 1-butyl-3-methylimidazolium chloride (BMIMCl) and organic solvent dimethylacetamide (CH3CN(CH3)2) as reaction media. The acronyms SOPIL and SOPOS refer to the surfactants prepared with BMIMCl and dimethylacetamide, respectively. The surface tension, dispersant effectiveness, optical microscopy, and emulsion stability test were conducted to examine the comparative performance of the synthesized surfactants. The Baffled flask test (BFT) was carried out to determine the dispersion effectiveness. The toxicity test was performed against zebrafish (Danio rerio), whereas the closed bottle test (CBT) evaluated biodegradability. The results revealed that the critical micelle concentration (CMC) value of SOPIL was lower (8.57 mg/L) than that of SOPOS (9.42 mg/L). The dispersion effectiveness values for SOPIL and SOPOS were 69.78% and 40.30%, respectively. The acute toxicity test demonstrated that SOPIL was 'practically non-toxic' with a median lethal concentration of more than 1000 mg/L after 96 h. The biodegradation rate was recorded as higher than 60% for both surfactants within 28 days, demonstrating their readily biodegradable nature. Considering these attributes, biocompatible and biodegradable surfactants derived from orange peel emerge as a promising and sustainable alternative for oil spill remediation.

Effect of ionic surfactants on the settling behavior of silt

Ionic surfactants are easily adsorbed by silt and clay particles, thus affecting the flocculation characteristics and settling behavior. The settling velocity, typical size, Zeta potential and surface tension of silt flocs were measured in the presence of two different kinds of ionic surfactants. The results indicated that the cetyltrimethylammonium bromide (CTAB, a typical cationic surfactant) can dramatically accelerate the settling of slit particles, while the linear alkylbenzene sulfonate (LAS, a typical anionic surfactant) slightly retarded silt sedimentation to some extent. In still water, the representative settling velocity dramatically increased from 0.36 cm s^-1 to 0.43 cm s^-1 with the increase of CTAB concentration, which increased by more than 20%. Oppositely, the sedimentation rate decreased from 0.36 cm s^-1 to 0.33 cm s^-1 with the increase of LAS concentration. In flowing water, as the flow rate increased from 0 to 20 cm s^-1 and the ionic surfactant concentration increased from 0 to 10 mg L^-1, the sedimentation rate decreased to 57% and 89% in the presence of CTAB and LAS respectively, which was due to an enhanced dispersion of silt particles and a breaking of flocs. The SEM image test shows that the floc particle size increased 1.5 times of the primary particle size under the high CTAB concentration. The flocculation induced by ionic surfactants greatly influences the sediment size as well as the law of settling velocity. The intrinsic influence mechanism was also discussed based on the variations of silt particle properties. This systematic study can be used for further development of flocculation models and particle size distribution of fine-grained soil.

Combined effects of temperature rise and sodium lauryl sulfate in the Mediterranean mussel

Personal care products (PCPs) are those compounds used daily (e.g., soaps, shampoos, deodorants, and toothpaste), explaining their frequent detection in aquatic systems. Still, scarce information is available on their effects on inhabiting wildlife. Among the most commonly used PCPs is the surfactant Sodium Lauryl Sulfate (SLS). The present study investigated the influence of temperature (CTL 17 ºC vs 22 ºC) on the effects of SLS (0 mg/L vs 4 mg/L) in the mussel species Mytilus galloprovincialis. Mussels' general health status was investigated, assessing their metabolic and oxidative stress responses. Higher biochemical alterations were observed in SLS-exposed mussels and warming enhanced the impacts, namely in terms of biotransformation capacity and loss of redox homeostasis, which may result in consequences to population maintenance, especially if under additional environmental stressors. These results confirm M. galloprovincialis as an excellent bioindicator of PCPs pollution, and the need to consider actual and predicted climate changes.

Degradation and transformation of linear alkyl-benzene sulfonates (LAS) in integrated constructed wetland-microbial fuel cell systems

Linear alkylbenzene sulfonates (LAS) are the most commonly-used anionic surfactants in cleaning agents and detergents. Taking sodium dodecyl benzene sulfonate (SDBS) as the target LAS, this study investigated the degradation and transformation of LAS in integrated constructed wetland-microbial fuel cell (CW-MFC) systems. Results showed that, SDBS was able to improve the power output and reduce the internal resistance of CW-MFCs by reducing transmembrane transfer resistance of organics and electrons because of the amphiphilicity and solubilization, however, SDBS with relatively high concentration had a great potential to inhibit electricity generation and organics biodegradation of CW-MFCs because of the toxic effects on microorganisms. C atoms on alkyl group and O atoms on sulfonic acid group of SDBS had greater electronegativity and were prone to oxidation reaction. The biodegradation of SDBS in CW-MFCs was a process of alkyl chain degradation, desulfonation and benzene ring cleavage in sequence via ω, β and/or α-oxidations and radical attacks under the action of coenzymes and oxygen, in which 19 intermediates were produced, including four anaerobic degradation products (toluene, phenol, cyclohexanone and acetic acid). Especially, for the first time cyclohexanone was detected during the biodegradation of LAS. The bioaccumulation potential of SDBS was greatly reduced through the degradation by CW-MFCs, and thus the environmental risk of SDBS was effectively reduced.

Surfactant-enhanced mobilization of persistent organic pollutants: Potential for soil and sediment remediation and unintended consequences

This review aims to provide an overview of the sources and reactions of persistent organic pollutants (POPs) and surfactants in soil and sediments, the surfactant-enhanced solubilisation of POPs, and the unintended consequences of surfactant-induced remediation of soil and sediments contaminated with POPs. POPs include chemical compounds that are recalcitrant to natural degradation through photolytic, chemical, and biological processes in the environment. POPs are potentially toxic compounds mainly used in pesticides, solvents, pharmaceuticals, or industrial applications and pose a significant and persistent risk to the ecosystem and human health. Surfactants can serve as detergents, wetting and foaming compounds, emulsifiers, or dispersants, and have been used extensively to promote the solubilization of POPs and their subsequent removal from environmental matrices, including solid wastes, soil, and sediments. However, improper use of surfactants for remediation of POPs may lead to unintended consequences that include toxicity of surfactants to soil microorganisms and plants, and leaching of POPs, thereby resulting in groundwater contamination.

An Overview on the Treatment of Oil Pollutants in Soil Using Synthetic and Biological Surfactant Foam and Nanoparticles

Oil-contaminated soil is one of the most concerning problems due to its potential damage to human, animals, and the environment. Nanoparticles have effectively been used to degrade oil pollution in soil in the lab and in the field for a long time. In recent years, surfactant foam and nanoparticles have shown high removal of oil pollutants from contaminated soil. This review provides an overview on the remediation of oil pollutants in soil using nanoparticles, surfactant foams, and nanoparticle-stabilized surfactant foams. In particular, the fate and transport of oil compounds in the soil, the interaction of nanoparticles and surfactant foam, the removal mechanisms of nanoparticles and various surfactant foams, the effect of some factors (e.g., soil characteristics and amount, nanoparticle properties, surfactant concentration) on remediation efficiency, and some advantages and disadvantages of these methods are evaluated. Different nanoparticles and surfactant foam can be effectively utilized for treating oil compounds in contaminated soil. The treatment efficiency is dependent on many factors. Thus, optimizing these factors in each scenario is required to achieve a high remediation rate while not causing negative effects on humans, animals, and the environment. In the future, more research on the soil types, operating cost, posttreatment process, and recycling and reuse of surfactants and nanoparticles need to be conducted.

The microbiome of the sponge Aplysina caissara in two sites with different levels of anthropogenic impact

Despite the important roles that marine sponges play in ecosystem functioning and structuring, little is known about how the sponge holobiont responds to local anthropogenic impacts. Here we assess the influence of an impacted environment (Praia Preta) on the microbial community associated with the endemic sponge Aplysina caissara in comparison to a less-impacted area (Praia do Guaecá) from the coast of São Paulo state (Brazil, southwestern Atlantic coast). We hypothesized that the local anthropogenic impacts will change the microbiome of A. caissara and that the community assembly will be driven by a different process (i.e. deterministic versus stochastic) under distinct levels of impact. The microbiome at the amplicon sequence variants level was found to be statistically distinct between sponges from the different sites, and this was also seen for the microbial communities of the surrounding seawater and sediments. Microbial communities of A. caissara from both sites were found to be assembled by deterministic processes, even though the sites presented distinct anthropogenic impacts, showing a pivotal role of the sponge host in selecting its own microbiome. Overall, this study revealed that local anthropogenic impacts altered the microbiome of A. caissara; however, assembly processes are largely determined by the sponge host.

Binding of Ca2+ Ions to Alkylbenzene Sulfonates: Micelle Formation, Second Critical Concentration and Precipitation

Anionic surfactants, such as sodium linear alkylbenzene sulfonates (NaLAS), are utilized in various fields, including industry, household, and agriculture. The efficiency of their use in aqueous environments is significantly affected by the presence of cations, Ca²⁺ and Mg²⁺ in particular, as they can decrease the concentration of the surfactant due to precipitation. To understand cation-sulfonate interactions better, we study both NaLAS colloidal solutions in the presence of CaCl₂ and precipitates forming at higher salt concentrations. Upon addition of CaCl₂, we find the surface tension and critical micelle concentration of NaLAS to decrease significantly, in line with earlier findings for alkylbenzylsulfonates in the presence of divalent cations. Strikingly, an increase in the surface tension is discernible above 0.6 g L^-1 NaLAS, accompanied by the decrease of apparent micelle sizes, which in turn gives rise to transparent systems. Thus, there appears to be a second critical concentration indicating another micellar equilibrium. Furthermore, the maximum salt tolerance of the surfactant is 0.1 g L^-1 Ca²⁺, above which rapid precipitation occurs yielding sparingly soluble CaLAS₂∙2H₂O.

Accelerated transformation of sodium dodecylbenzene sulfonate surfactant in the UV/chlorine process: Kinetics and formation of chlorinated disinfection by-products

The degradation kinetics of Sodium dodecylbenzene sulfonate (SDBS) surfactant in the UV/chlorine process was comprehensively investigated, and the formation of chlorinated disinfection by-products (Cl-DBPs) were determined. Results showed that the degradation of SDBS by UV, chlorine and UV/chlorine all followed pseudo-first-order kinetics. The rate constant by UV/chlorine in ultrapure water was approximately 3 times higher than the sum of those by UV and chlorine, and decreased from 0.297 to 0.063 min^-1 with pH increasing from 5.0 to 9.0. Water matrices such as NO₃^-, HCO₃^- and natural organic matter (NOM) inhibited the degradation efficiency to a certain extent. The second-order rate constant of SDBS with HO^• was determined as 2.84 × 10⁹ M^-1 s^-1. Through using different probes, the main contributors to SDBS degradation were found to be UV, HO^• and reactive chlorine species (RCS). Meanwhile, 64.0 μg L^-1 trichloromethane (TCM) and 8.7 μg L^-1 chloral hydrate (CH) were simultaneously formed within 30 min of UV/chlorine treatment. The concentration of total organic chlorine (TOCl) (424.0 μg L^-1) was obviously higher than those of TCM and CH. In addition, 414 unknown by-products formed during UV/chlorine treatment were detected by mass spectrometry at a high confidence level, including 64 monochloro-DBPs and 2 dichloro-DBPs. Although UV/chlorine process accelerated SDBS degradation, the associated DBP formation deserves enough attention.

Assessment of the aerobic and anaerobic biodegradation of contaminants of emerging concern in sludge using batch reactors

This work explores the degradation of xenobiotic compounds in aerobic and anaerobic batch reactors. Different inoculums were spiked with nine emerging contaminants at nominal concentrations ranging between 1 to 2 mg/L (ibuprofen, diclofenac, naproxen, acesulfame, sucralose, aspartame, cyclamate, linear alkylbenzene sulfonates, and secondary alkyl sulfonates). Ethanol was used as co-substrate in the anaerobic reactors. We found that the kinetic decay was faster in the aerobic reactors inoculated with a Spanish (S_pn) inoculum compared to a Brazilian (B_rz) inoculum, resulting in rection rates for LAS and SAS of 2.67 ± 3.6 h^-1 and 5.09 ± 6 h^-1 for the B_rz reactors, and 1.3 ± 0.1 h^-1 and 1.5 ± 0.2 h^-1 for the S_pn reactors, respectively. There was no evidence of LAS and SAS degradation under anaerobic conditions within 72 days; nonetheless, under aerobic conditions, these surfactants were removed by both the B_rz and S_pn inoculums (up to 86.2 ± 9.4% and 74.3 ± 0.7%, respectively) within 10 days. The artificial sweeteners were not removed under aerobic conditions, whereas we could observe a steady decrease in the anaerobic reactors containing the S_pn inoculum. Ethanol aided in the degradation of surfactants in anaerobic environments. Proteiniphilum, Paraclostridium, Arcobacter, Proteiniclasticum, Acinetobacter, Roseomonas, Aquamicrobium, Moheibacter, Leucobacter, Synergistes, Cyanobacteria, Serratia, and Desulfobulbus were the main microorganisms identified in this study.

Chronic toxicity of PFAS-free AFFF alternatives in terrestrial plant Brassica rapa

Fluorine (F)-free firefighting foams will be replacing per- and polyfluoroalkyl substances (PFAS)-containing aqueous film-forming foams (AFFFs) at U.S. military installations imminently, yet the environmental impacts of F-free foams are largely unknown. Ecotoxicity assessment of F-free foams is urgently needed to avoid replacement regret. In this study, we comparatively assessed phytotoxicity of six F-free formulations and one current short-chain fluorinated AFFF in terrestrial plant Brassica rapa. Five of six F-free formulations exerted higher toxicity than the short-chain AFFF to the growth and reproduction of B. rapa, with 8-51 times and > 10 times lower EC₅₀ values, respectively. Nontargeted analysis indicated the occurrence of transformation products of the test formulations in the above-ground plant tissues. In agreement with their phytotoxicity, the five highly toxic F-free formulations generated more transformation products with higher peak intensities in plant tissues than the two weakly toxic formulations. The most abundant transformation products detected in plant extracts were suspect transformation products derived from diethylene glycol monobutyl ether, a common ingredient of the five toxic formulations. This study provides ecotoxicological data that, combined with data from all related ongoing research, should be used in decision making regarding recommendations for manufacturing and use of candidate F-free foams.

Biodegradable arginine based steroid-surfactants: Cationic green agents for hydrophobic ion-pairing

The aim of this study was to evaluate the safety and efficacy for hydrophobic ion-pairing of surfactants based on arginine (Arg). The prepared Arg-cholesteryl ester (ACE) and Arg-diosgenyl ester (ADE) were characterized regarding solubility, pKa, critical micellar concentration (CMC), biodegradability as well as membrane- and aquatic toxicity using DOTAP as reference. The ability for hydrophobic ion-pairing was evaluated and the lipophilicity of formed complexes was determined. NMR, FT-IR and MS confirmed successful synthesis of Arg-surfactants. The slightly soluble single-charged Arg-surfactants (pH < pKa₃ (ACE = 10.42 ± 0.52; ADE = 10.38 ± 0.27)) showed CMCs of 27.17 µM for ACE and 35.67 µM for ADE. CMCs of the sparingly soluble double-charged species (pH < pKa₂ (ACE = 5.30 ± 0.20; ADE = 5.55 ± 0.06)) were determined at concentrations of ≥ 250 µM for ACE and ≥ 850 µM for ADE. The enzymatic- and environmental biodegradability was proven by an entire cleavage of Arg-surfactants within 24 h, whereas DOTAP remained stable. Arg-surfactants exhibited lower membrane- (> 2-fold) and aquatic toxicity (> 15-fold) than DOTAP. The complexes formed with Arg-surfactants and insulin showed higher lipophilicity than the DOTAP-complex. According to these results, Arg-surfactants might be a promising safe tool for the delivery of peptide drugs.

An overview on surfactants as pollutants of concern: Occurrence, impacts and persulfate-based remediation technologies

Surfactants are molecules that reduce interfacial energy and increase solubility of other pollutants in water. These properties make them suitable for various domestic and industrial applications, soil remediation, pesticide formulation, among others. The increase in their use and the lack of strict regulations regarding their disposal and management is a matter of concern and requires more attention since the release and distribution of these compounds into the environment can modify important water quality parameters. As a result of these changes, different toxicological effects to aquatic organisms are discussed and exposed herein. On this basis, we provide an overview of the classes of surfactants, as well as their occurrence in different aqueous matrices. In addition, existing regulations around the world regarding their concentration limit for different environments are discussed. Current research focuses on the application of conventional treatments, such as biological treatments; notwithstanding, more toxic and bioaccumulative products can be generated. Advanced Oxidation Processes are promising alternatives and have also been widely applied for the removal of surfactants. This study provides, for the first time, an overview of the application of persulfate-based processes for surfactants degradation based on recent literature findings, as well as the various factors related to the activation of the persulfate anions. This review also highlights the challenges and opportunities for future research to overcome the obstacles to the practical application of this process.

Duckweed Potential for the Phytoremediation of Linear Alkylbenzene Sulfonate (LAS): Identification of Some Intermediate Biodegradation Products and Evaluation of Antioxidant System

Duckweed (Lemna minor L.) has a high potential for wastewater treatment. Here, its capability for bioremoval of linear alkylbenzene sulfonate (LAS) as one of the primary contaminants of water resources was evaluated. The effect of some operational parameters on surfactant removal efficiency was determined. Also, the impact of LAS on several physiological responses of Lemna was investigated. LAS remediation efficiency of L. minor was elevated with increasing LAS concentration, duckweed weight, and temperature. Furthermore, the optimal pH for removal was 7-8.5. The benzenesulfonate ring and five homologs of sulfophenyl carboxylate were identified as intermediates in the LAS degradation pathway. A decrease in relative growth rate and pigment contents was observed by increasing LAS concentration. In contrast, an increase in hydrogen peroxide content and electrolyte leakage indicated oxidative stress by LAS. Induction of enzymatic/non-enzymatic antioxidants was observed during the surfactant remediation process, indicating their role in overcoming free radicals generated under surfactant stress.

New Biobased Sulfonated Anionic Surfactants Based on the Esterification of Furoic Acid and Fatty Alcohols: A Green Solution for the Replacement of Oil Derivative Surfactants with Superior Proprieties

The surfactant market represents a key sector of the chemical industry and encompasses many diverse applications. Their sustainability in terms of feedstock used, synthetic procedure, biodegradability, and formulation are crucial parameters to assessing the environmental impact of the surfactant. The anionic surfactant linear alkyl benzene sulfonates have proven successful to date because of their high performance, low cost, and extensive studies within formulations to optimize performance, allowing usage in a large variety of applications, especially in cleaning. Due to their advantageous properties and extensive research and development, their substitution with a biobased surfactant such as sodium dodecyl sulfate has struggled to succeed. Furan surfactants have been reported as valuable candidates for the implementation of green alternatives to traditional anionic sulfonated surfactants with a perfect trade-off between performances and green credentials. However, their implementation suffers of scalability and high cost in producing the final product due to feedstock availability and low yields of the final product. Herein, we report a new class of furan surfactants, sulfonated alkyl furoates, which are derived from the esterification of furoic acid and fatty alcohols, followed by a sulfonation step. Compared to traditional surfactants, they showed more favorable behavior in basic proprieties (such as critical micelle concentration, ecotoxicity, hard water resistance, surface tension water/oil), which gives a good prospective for the introduction of a new biobased chemical with superior performances.

Modeling Alkyl Aromatic Hydrocarbons with Dissipative Particle Dynamics

Building on previous work studying alkanes, we develop a dissipative particle dynamics (DPD) model to capture the behavior of the alkyl aromatic hydrocarbon family under ambient conditions of 298 K and 1 atmosphere. Such materials are of significant worldwide industrial importance in applications such as solvents, chemical intermediates, surfactants, lubricating oils, hydraulic fluids, and greases. We model both liquids and waxy solids for molecules up to 36 carbons in size and demonstrate that we can correctly capture both the freezing transition and liquid-phase densities in pure substances and mixtures. We also demonstrate the importance of including specialized bead types into the DPD model (rather than solely relying on generic bead types) to capture specific local geometrical constructs such as the benzene ring found in the benzyl chemical group; this can be thought of as representing subtle real-world many-body effects via customized pairwise non-bonded potentials.

Synthetic Routes for Designing Furanic and Non Furanic Biobased Surfactants from 5-Hydroxymethylfurfural

5-hydroxymethylfurfural (HMF) is one of the most valuable biomass platform molecules, enabling the construction of a plethora of high value-added furanic compounds. In particular, in the last decade, HMF has been considered as a starting material for designing biobased surfactants, not only because of its renewability and carbon footprint, but also because of its enhanced biodegradability. This Review presents recent examples of the different approaches to link the hydrophilic and lipophilic moieties into the hydrophobic furan (and tetrahydrofuran) ring, giving a variety of biobased surfactants that have been classified here according to the charge of the head polar group. Moreover, strategies for the synthesis of different non-furanic structures surfactant molecules (such as levulinic acid, cyclopentanols, and aromatics) derived from HMF are described. The new HMF-based amphiphilic molecules presented here cover a wide range of hydrophilic-lipophilic balance values and have suitable surfactant properties such as surface tension activity and critical micelle concentration, to be an important alternative for the replacement of non-sustainable surfactants.

Design and application of a dust suppression technology of the forcing air curtain in fully mechanized rock tunnelling faces

To effectively reduce high dust concentrations and keep clean air in fully mechanized rock tunnelling faces in coal mine, this study carried out a research of dust suppression technology of the forcing air curtain. First, the mechanism of dust diffusion controlled by the forcing air curtain was introduced in this study. Then, numerical simulations of the formation of the forcing air curtain as well as the influence for dust diffusion under the different distance between forcing air duct outlet and heading end were carried out. Moreover, a dust suppression technology of the forcing air curtain was designed and tested in a fully mechanized rock tunnelling face of southern return air tunnel which was located in the Tangkou coal mine of China. It shows that the numerical simulation results were in good agreement with the in situ tests. The average removal rate of total and respirable dust could reach up to 95.1% and 96.1%, respectively, at manned working areas in the tunnel. Research results show that the dust suppression technology of the forcing air curtain is an effective method of dust control in fully mechanized rock tunnelling faces.

Tracking pollutants in a municipal sewage network impairing the operation of a wastewater treatment plant

This work provides a screening of organic contaminants and characterization of the dissolved organic matter in the sewer network until the municipal wastewater treatment plant (WWTP), identifying the network areas with a higher degree of contamination and their impact on the WWTP performance, particularly in the activated sludge reactor. Three monitoring campaigns were carried out at six selected locations of the sewage system (PVZ-1, PVZ-2, PS-F, PS-VC, CP-VC, and PS-T), influent (WWTP_INF) and effluent (WWTP_EFF) of the WWTP. Advanced analytical techniques were employed, namely excitation/emission matrix fluorescence-parallel factor analysis (EEM-PARAFAC), size exclusion chromatography with organic carbon detector (SEC-OCD), and liquid chromatography with high-resolution-mass spectrometric detection (LC-HRMS). EEM-PARAFAC showed higher fluorescence intensity for the protein-like component (C2), particularly at CP-VC (near seafood industries) associated with the presence of surfactants (~50 mg/L). SEC-OCD highlighted the WWTP efficiency in removing low molecular weight acids and neutrals. LC-HRMS tentatively identified 108 compounds of emerging concern (CEC) and similar detection patterns were obtained for all wastewater samples, except for PVZ-2 (lower detection), many of which occurred in the effluent. Eight CECs included on relevant Watch-Lists were detected in all WWTP_EFF samples. Furthermore, 111 surfactants were detected, the classes more frequently found being alcohol ethoxylates (AEOs), nonylphenol polyethoxylates (NPEOs) and linear alkylbenzene sulphonates (LAS). The continuous presence of LAS and NPEOs allied to surfactants concentrations in the WWTP_INF of 15-20 mg/L, with CP-VC location (linked with food industries) as an important contributor, explain the morphological changes in the activated sludge and high LAS content in the dewatered sludge, which may have impacted WWTP performance.

Assessment of leachable and persistent dissolved organic carbon in sludges and biosolids from municipal wastewater treatment plants

Environmental regulation of organic pollutants has not kept pace with the growth in the number and diversity of legacy and emerging organic substances now in use. Simpler and cheaper tools and methodologies are needed to quickly assess the organic pollutant risks in waste materials applied to land such as municipal wastewater treatment sludges and biosolids. This study attempts to provide these, using an approach that consists of chemical leaching and analysis of dissolved organic carbon and determination of its biodegradability by measuring persistent dissolved organic carbon. Primary and secondary sludges, dewatered sludge cake, and anaerobically and thermally treated biosolids obtained from various types of municipal wastewater treatment plants were used in the study. The study found little variability in the levels of dissolved organic carbon leached from primary sludges obtained from different municipal wastewater treatment plants but found significant differences for secondary sludges based on levels of nitrification at the municipal wastewater treatment plants. As predicted treated biosolids leached less dissolved organic carbon than untreated dry sludges but had relatively higher proportions of persistent or poorly biodegradable dissolved organic carbon. Across all tested sludges and biosolids persistent dissolved organic carbon ranged from 14 to 39%, with biosolids that have undergone anaerobic digestion and thermal treatment more likely to contain greater relative proportion of persistent dissolved organic carbon than untreated sludges. The approach presented in this study will be useful in assessing the effectiveness of current and widely employed sludge treatment methods in reducing persistent organic pollutants in biosolids disposed on land.

Commonly used surfactants sodium dodecyl sulphate, cetylpyridinium chloride and sodium laureth sulphate and their effects on antioxidant defence system and oxidative stress indices in Cyprinus carpio L.: an integrated in silico and in vivo approach

The present study evaluated the homology modelling, in silico prediction and characterization of Cyprinus carpio cytochrome P450, as well as molecular docking experiments between the modelled protein and the surfactants sodium dodecyl sulphate (SDS), sodium laureth sulphate (SLES) and cetylpyridinium chloride (CPC). Homology modelling of cytochrome P450 was performed using the best fit template structure. The structure was optimized with 3D refine, and the ultimate 3D structure was checked with PROCHEK and ERRATA. ExPASy's ProtParam was likewise used to analyse the modelled protein's physiochemical and stereochemical attributes. To establish the binding pattern of each ligand to the targeted protein and its effect on the overall protein conformation, molecular docking calculations and protein-ligand interactions were performed. Our in silico analysis revealed that hydrophobic interactions with the active site amino acid residues of cytochrome p450 were more prevalent than hydrogen bonds and salt bridges. The in vivo analysis exhibited that exposure of fish to sublethal concentrations (10% and 30% of 96 h LC₅₀) of SDS (0.34 and 1.02 mg/l), CPC (0.002 and 0.006 mg/l) and SLES (0.69 and 2.07 mg/l) at 15d, 30d and 45d adversely affected the oxidative stress and antioxidant enzymes (CAT, SOD, GST, GPx and MDA) in the liver of Cyprinus carpio. As a result, the study suggests that elicited oxidative stress, prompted by the induction of antioxidant enzymes activity, could be attributable to the stable binding of cytochrome P450 with SDS, CPC and SLES which ultimately leads to the evolution of antioxidant enzymes for its neutralization.

Review of the environmental fate and effects of two UV filter substances used in cosmetic products

Sunscreens containing UV filters, such as octocrylene (OCR) and butyl-methoxydibenzoylmethane (BMDBM), have been increasingly used to protect human skin against UV radiation. Both substances have been detected in monitoring studies in the freshwater and marine environment, and there has been concern about potential effects on aquatic organisms. In the present work, the environmental fate and occurrence, bioaccumulation and ecotoxicity including endocrine effects of OCR and BMDBM are reviewed focusing on the aquatic environment. The two UV filters have low water solubilities and a high sorption potential. The available data indicate that OCR is poorly biodegradable. BMDBM lacks anaerobic and inherent biodegradability. However, it was biodegraded to variable degrees in simulation studies. Measured concentrations in the freshwater and marine environment were found to vary considerably between sites, depending on the extent of recreational activities or wastewater discharges. While the bioconcentration factor of OCR in fish is below the threshold value for bioaccumulation according to EU REACH, the available data for BMDBM do not allow a definitive conclusion on its bioaccumulation potential. Analysis of the aquatic toxicity data showed that data quality was often limited, e.g. in the case of effect concentrations substantially exceeding maximum achievable dissolved concentrations. Up to their limit of water solubility, OCR and BMDBM showed no toxicity to microorganisms, algae, and corals, and no acute toxicity to daphnids and fish. In chronic daphnid tests, OCR was highly toxic, whereas BMDBM lacked toxicity. Reliable water-sediment toxicity tests are required to further evaluate possible effects on benthic invertebrates. The available data do not provide evidence for endocrine effects of the two UV filters on fish. In order to assess potential environmental risks caused by OCR and BMDBM, a validated exposure model for estimating direct emission of UV filters into the aquatic environment and data from systematic, longer-term monitoring studies are needed.

Effects of internal hydrophilic groups of a newly developed sustainable anionic surfactant on biodegradability and ecotoxicity

Recently, a new sustainable anionic surfactant called bio-based internal olefin sulfonate (Bio IOS) has been developed. This surfactant enables excellent water solubility and high surface activity. It has a unique structure of long hydrophobic alkyl chains (C16 to C18) with two types of hydrophilic groups in its midsection, which distinguish it from other conventional anionic surfactants. However, the effects of the specific structural features of the surfactant on its environmental properties and the consequent effects on the environment remain unclear. In this study, we investigated the environmental fate and ecotoxicity of Bio IOS and the effects of the types and positions of hydrophilic groups on biodegradability and ecotoxicity. Biodegradation studies demonstrated that Bio IOS was readily biodegradable with >99.5% removal in wastewater treatment activated sludge (test concentration: 1 mg/L) and a fast half-life of 5.8 h in river water (test concentration: 10 μg/L); the excellent biodegradability was likely due to the high water solubility attributed to the internal hydrophilic groups. Meanwhile, moderately toxic effects were observed, whereby the 50% lethal and effect concentrations of the three freshwater species were above 1 mg/L. Ecotoxicity studies with different types and positions of hydrophilic groups revealed that hydroxyalkane sulfonate was less toxic and that toxicity was reduced in the presence of more internally located hydrophilic groups. These findings suggest that the hydroxyl group and the internal positions of hydrophilic groups that constitute the molecular configuration resembling two separate shorter alkyl chains may reduce the adverse effects on organisms despite the long alkyl chains.

Self-Assembling Drug Formulations with Tunable Permeability and Biodegradability

This review focuses on key topics in the field of drug delivery related to the design of nanocarriers answering the biomedicine criteria, including biocompatibility, biodegradability, low toxicity, and the ability to overcome biological barriers. For these reasons, much attention is paid to the amphiphile-based carriers composed of natural building blocks, lipids, and their structural analogues and synthetic surfactants that are capable of self-assembly with the formation of a variety of supramolecular aggregates. The latter are dynamic structures that can be used as nanocontainers for hydrophobic drugs to increase their solubility and bioavailability. In this section, biodegradable cationic surfactants bearing cleavable fragments are discussed, with ester- and carbamate-containing analogs, as well as amino acid derivatives received special attention. Drug delivery through the biological barriers is a challenging task, which is highlighted by the example of transdermal method of drug administration. In this paper, nonionic surfactants are primarily discussed, including their application for the fabrication of nanocarriers, their surfactant-skin interactions, the mechanisms of modulating their permeability, and the factors controlling drug encapsulation, release, and targeted delivery. Different types of nanocarriers are covered, including niosomes, transfersomes, invasomes and chitosomes, with their morphological specificity, beneficial characteristics and limitations discussed.

Degrading ability and robust antioxidative defence system led to SDS tolerance in cyanobacterium Fischerella sp. lmga1

To test the tolerance and degradation potential of the cyanobacterium Fischerella sp. lmga1 for surfactant, sodium dodecyl sulfate (SDS), different doses of SDS (10, 30, 40, 50, 70 and 100 µM) were used for the growth. The lower doses of SDS supported the growth of cyanobacterium whereas the higher doses were found to be inhibitory but the cyanobacterium somehow managed its survival up to 100 µM SDS. However, a significant reduction was observed in the pigment and protein content. A substantial accumulation of carbohydrate at 70 µM SDS may act as an osmoprotectant for the survival of the cyanobacterium. The higher doses of SDS also triggered the ROS generation and lipid peroxidation which showed negative impact on the PSII efficiency. Simultaneously, an efficient ROS mitigation system (SOD and CAT activity) has also been worked up to 70 µM SDS while APX was enhanced only up to 50 µM SDS. Furthermore, the SDS degrading potential was investigated and almost 80% of the SDS was degraded after 6^th days of treatment in the cyanobacterium. Hence, the results suggested that due to robust antioxidative defence system and ability to degrade the surfactant this cyanobacterium showed significant tolerance toward SDS.

Nanobioremediation: A sustainable approach towards the degradation of sodium dodecyl sulfate in the environment and simulated conditions

Nanotechnology has gained huge importance in the field of environmental clean-up today. Due to their remarkable and unique properties, it has shown potential application for the remediation of several pesticides and textile dyes. Recently it has shown positive results for the remediation of sodium dodecyl sulfate (SDS). One of the highly exploited surfactants in detergent preparation is anionic surfactants. The SDS selected for the present study is an example of anionic linear alkyl sulfate. It is utilized extensively in industrial washing, which results in the high effluent level of this contaminant and ubiquitously toxic to the environment. The present review is based on the research depicting the adverse effects of SDS in general and possible strategies to minimizing its effects by bacterial degradation which are capable of exploiting the SDS as an only source of carbon. Moreover, it has also highlighted that how nanotechnology can play a role in the remediation of such recalcitrant pesticides.

Microbiome degrading linear alkylbenzene sulfonate in activated sludge

As the most widely used anionic surfactant, linear alkylbenzene sulfonate (LAS) requires biological alkane degradation when it is treated using an activated sludge (AS) process in a wastewater treatment plant because of its structural carboxylic unavailability. As consumption of LAS is gradually increasing, LAS loading into the WWTP is accordingly increasing. However, fewer studies have examined the involvement of the AS microbial community in the LAS degradation. In this study, metagenomic approaches were used to define microbiomes involved in LAS degradation in AS, with a particular focus on ω-hydroxylation. The abundance and diversity of alkane-degrading genes were investigated, and these genes were integrated with reconstructed metagenome-assembled genomes (MAGs). Additionally, the association of functional genes and MAGs with respect to LAS degradation was investigated. The results showed that alkB and cytochrome P450 genes were only shared within specific MAGs. Unique sets of genes with diverse abundances were detected in each sample. The MAGs with the alkB and cytochrome P450 genes were strongly associated with the other MAGs and involved in positive commensal interactions. The findings provided significant insights into how the AS microbiomes, which have continuously treated anionic surfactants for decades, potentially metabolize LAS and interact with commensal bacteria.

The identification and performance assessment of dominant bacterial species during linear alkylbenzene sulfonate (LAS)-biodegradation in a bioelectrochemical system

The anionic surfactant linear alkylbenzene sulfonate (LAS) is a major chemical constituent of detergent formulation. Regarding the recalcitrant nature of sulfonoaromatic compounds, discharging these substances into wastewater collection systems is a real environmental issue. A study on LAS biodegradation based on bioelectrochemical treatment and in the form of developing a single-chamber microbial fuel cell with air cathode is reported in the present work. Pretreatment study showed LAS concentration of 60 ppm resulted in the highest anaerobic LAS removal of 57%; so, this concentration was chosen to run the MFC. After the sustained anodic biofilm was formed, LAS degradation rate during 4 days in MFC was roughly 76% higher than that in the serum bottle, which indicated the role of the bioelectrochemical process in improving anaerobic LAS removal. Additionally, through 16S rRNA gene sequencing, the dominant bacterial species in the biofilm was identified as Pseudomonas zhaodongensis NEAU-ST5-21(T) with about 98.9% phylogenetic similarity and then a pathway was proposed for LAS anaerobic biodegradation. The MFC characteristics were assessed by pH monitoring as well as scanning electron microscopy and current density evolution.

Bioelectrochemical treatment of actual carwash wastewater associated with sustainable energy generation in three-dimensional microbial fuel cell

Carwash garages are worldwide cleaning facilities. Discharge of their untreated or improperly treated wastewaters highly contributes to the pollution of water resources. Sodium dodecyl sulfate (SDS), a widely used anionic surfactant in the carwash shampoos represents the major constituent of the carwash wastewater. In this study, a new configuration of three-dimensional MFC packed with irregular shaped graphite granules to support and join the plain anodes in the anodic section. The performance of the 3D-MFC was evaluated in two operational modes; continuous and batch. The evaluation was carried out mainly in terms of the removal efficiency of organic content, in particular SDS as well as oil and grease associated with bioenergy generation from actual carwash wastewater used to fuel the MFC. The results demonstrated that maximum removal efficiencies of COD, SDS, and oil and grease were 87%, 88%, and 90%, respectively. Also, the results demonstrated that during the continuous mode operation maximum current density and power output were 1786 mA/m³ and 482 mW/m³, respectively. At batch operation mode, the maximum current density and power output were 1793 mA/m³ and 478 mW/m³, respectively indicating that the performance of the 3D-MFC was comparable in both operation modes.

Alcohol ethoxysulfates (AES) in environmental matrices

Extensive use of surfactants in numerous fields resulted in their discharge into various environmental compartments including soil, sediment, and water. Alcohol ethoxysulfates (AES) together with alcohol ethoxylates (AE), alkyl sulfates (AS), and linear alkyl benzene sulfonates (LAS) find wide variety of applications in consumer products including both domestic and industrial applications. Consequently, all these surfactants pose several concerns to both aquatic and human health. In the context of environmental impacts, AES has almost equal importance as that of LAS though the literature on this topic is only emerging. This review provides a detailed overview on the various aspects of the anionic surfactant, AES, such as toxicity of AES, its fate in the ecosystem, technical advancements in the area of identification and quantification, its occurrence and distribution in different environmental compartments spanning across the world, and finally a remark of its potential removal strategy from the environment.

Fungal biosurfactants, from nature to biotechnological product: bioprospection, production and potential applications

Biosurfactants are in demand by the global market as natural commodities that can be added to commercial products or use in environmental applications. These biomolecules reduce the surface/interfacial tension between fluid phases and exhibit superior stability to chemical surfactants under different physico-chemical conditions. Biotechnological production of biosurfactants is still emerging. Fungi are promising producers of these molecules with unique chemical structures, such as sophorolipids, mannosylerythritol lipids, cellobiose lipids, xylolipids, polyol lipids and hydrophobins. In this review, we aimed to contextualize concepts related to fungal biosurfactant production and its application in industry and the environment. Concepts related to the thermodynamic and physico-chemical properties of biosurfactants are presented, which allows detailed analysis of their structural and application. Promising niches for isolating biosurfactant-producing fungi are presented, as well as screening methodologies are discussed. Finally, strategies related to process parameters and variables, simultaneous production, process optimization through statistical and genetic tools, downstream processing and some aspects of commercial products formulations are presented.