Continuous Cell Characterization and Separation by Microfluidic Alternating Current Dielectrophoresis

Dielectrophoretic separation and purification: From colloid and biological particles to droplets

It is indispensable to realize the high level of purification and separation, so that objective particles, such as malignant cells, harmful bacteria, and special proteins or biological molecules, could satisfy the high precise measurement in the pharmaceutical analysis, clinical diagnosis, targeted therapy, and food defense. In addition, this could reveal the intrinsic nature and evolution mechanisms of individual biological variations. Consequently, many techniques related to optical tweezers, microfluidics, acoustophoresis, and electrokinetics can be broadly used to achieve micro- and nano-scale particle separations. Dielectrophoresis (DEP) has been used for various manipulation, concentration, transport, and separation processes of biological particles owing to its early development, mature theory, low cost, and high throughput. Although numerous reviews have discussed the biological applications of DEP techniques, comprehensive descriptions of micro- and nano-scale particle separations feature less frequently in the literature. Therefore, this review summarizes the current state of particle separation attention to relevant technological developments and innovation, including theoretical simulation, microchannel structure, electrode material, pattern and its layout. Moreover, a brief overview of separation applications using DEP in combination with other technologies is also provided. Finally, conclusions, future guidelines, and suggestions for potential promotion are highlighted.

An Integrated Inertial-Magnetophoresis Microfluidic Chip Online-Coupled with ICP-MS for Rapid Separation and Precise Detection of Circulating Tumor Cells

Circulating tumor cells (CTCs) are recognized as promising targets for liquid biopsy, which play an important role in early diagnosis and efficacy monitoring of cancer. However, due to the extreme scarcity of CTCs and partial size overlap between CTCs and white blood cells (WBCs), the separation and detection of CTCs from blood remain a big challenge. To address this issue, we fabricated a microfluidic chip by integrating a passive contraction-expansion array (CEA) inertial sorting zone and an active magnetophoresis zone with the trapezoidal groove and online coupled it with inductively coupled plasma mass spectrometry (ICP-MS) for rapid separation and precise detection of MCF-7 cells (as a model CTC) in blood samples. In the integrated microfluidic chip, most of the small-sized WBCs can be rapidly removed in the circular CEA inertial sorter, while the rest of the magnetically labeled WBCs can be further captured in the trapezoidal groove under the magnetic field. As a result, the rapid separation of MCF-7 cells from blood samples was achieved with an average recovery of 91.6% at a sample flow rate of 200 μL min-1. The developed online integrated inertial-magnetophoresis microfluidic chip-ICP-MS system has been applied for the detection of CTCs in real clinical blood samples with a fast analysis speed (5 min per 1 mL blood). CTCs were detected in all 24 blood samples from patients with different types of cancer, exhibiting excellent application potential in clinical diagnosis.

Integration of acoustic micromixing with cyclic olefin copolymer microfluidics for enhanced lab-on-a-chip applications in nanoscale liposome synthesis

The integration of acoustic wave micromixing with microfluidic systems holds great potential for applications in biomedicine and lab-on-a-chip technologies. Polymers such as cyclic olefin copolymer (COC) are increasingly utilized in microfluidic applications due to its unique properties, low cost, and versatile fabrication methods, and incorporating them into acoustofluidics significantly expands their potential applications. In this work, for the first time, we demonstrated the integration of polymer microfluidics with acoustic micromixing utilizing oscillating sharp edge structures to homogenize flowing fluids. The sharp edge mixing platform was entirely composed of COC fabricated in a COC-hydrocarbon solvent swelling based microfabrication process. As an electrical signal is applied to a piezoelectric transducer bonded to the micromixer, the sharp edges start to oscillate generating vortices at its tip, mixing the fluids. A 2D numerical model was implemented to determine the optimum microchannel dimensions for experimental mixing assessment. The system was shown to successfully mix fluids at flow rates up to 150µl h-1and has a modest effect even at the highest tested flow rate of 600µl h-1. The utility of the fabricated sharp edge micromixer was demonstrated by the synthesis of nanoscale liposomes.

Label-free separation of peripheral blood mononuclear cells from whole blood by gradient acoustic focusing

Efficient techniques for separating target cells from undiluted blood are necessary for various diagnostic and research applications. This paper presents acoustic focusing in dense media containing iodixanol to purify peripheral blood mononuclear cells (PBMCs) from whole blood in a label-free and flow-through format. If the blood is laminated or mixed with iodixanol solutions while passing through the resonant microchannel, all the components (fluids and cells) rearrange according to their acoustic impedances. Red blood cells (RBCs) have higher effective acoustic impedance than PBMCs. Therefore, they relocate to the pressure node despite the dense medium, while PBMCs stay near the channel walls due to their negative contrast factor relative to their surrounding medium. By modifying the medium and thus tuning the contrast factor of the cells, we enriched PBMCs relative to RBCs by a factor of 3600 to 11,000 and with a separation efficiency of 85%. That level of RBC depletion is higher than most other microfluidic methods and similar to that of density gradient centrifugation. The current acoustophoretic chip runs up to 20 µl/min undiluted whole blood and can be integrated with downstream analysis.

Numerical studies of manipulation and separation of microparticles in ODEP-based microfluidic chips

A novel optical-induced dielectrophoresis (ODEP) method employing a pressure-driven flow for the continuous separation of microparticles is presented in this study. By applying alternate current electric field on conductive indium tin oxide substrate and projecting the light geometry into the photoconductive layer, an inhomogeneous electric field is locally induced. The particles experience the dielectrophoretic force when passing through the lighting area, where the strongest electrical field gradient exists. By optimizing the structure of the lighting pattern, a stronger nonuniform electric field gradient is generated which predicts the separation of 1 and 3 µm polystyrene particles. Moreover, the effects of key parameters, including the light pattern geometry, applied voltage, and flow rate, were investigated in this study, leading to the successful sorting of 700 nm and 1 µm particles. To further examine the separation sensitivity and practicability of the proposed ODEP microfluidic method, the isolation of two different types of circulating tumor cells from T-cells and red blood cells are demonstrated, providing a novel method for the manipulation and separation of microparticles and nanoparticles.

Dielectrophoresis-assisted removal of Cd and Cu heavy metal ions by using Chlorella microalgae

A novel dielectrophoresis (DEP)-assisted device for the bioremediation of heavy metal ions by using Chlorella microalgae is presented in this paper. To generate the DEP forces, pairs of electrode mesh were inserted in the DEP-assisted device. By applying DC electric field via the electrodes, the inhomogeneous electric field gradient is induced and the strongest non-uniform electric field exists near the mesh cross-corner. After the adsorption of Cd and Cu heavy metal ions by Chlorella, the Chlorella chain were trapped along the vicinity of the electrode mesh. Then, the effects of Chlorella concentration on the adsorption of heavy metal ions, and the applied voltage and electrode mesh size on the removal of Chlorella are conducted. In the co-existing Cd and Cu solutions, the individual adsorption ratio of Cd and Cu reaches as high as approximately 96% and 98%, respectively, showing excellent bioremediation capability of multiple heavy metal ions in wastewater. By adjusting the applied electric voltage and the mesh size, the Chlorella adsorbed with Cd and Cu are captured by negative DC-DEP effects and the removal ratio of Chlorella reach an average of 97%, providing a method for the removal of multiple heavy metal ions in wastewater by using Chlorella microalgae.

Enrichment and Selection of Particles through Parallel Induced-Charge Electro-osmotic Streaming for Detection of Low-Abundance Nanoparticles and Targeted Microalgae

Manipulation of micro- and nanoscale objects is an essential procedure in many detection and sensing applications, including disease diagnosis and environmental monitoring. Induced-charge electro-osmotic (ICEO) vortices present excellent advantages in the enrichment and selection of micro/nanoscale particles for downstream detection due to gentle conditions and contactless operation, but the application of this method is currently constrained by the throughput. Double-layer charging at the ends of bipolar electrodes can maintain a continuous flow of electric current in the fluidically isolated channels, which provides a feasible method to manipulate particles using parallel ICEO vortices, promoting throughput of particle manipulation without compromising efficiency and overcoming the complicated ohmic contact of electrodes. Encouraged by these, we put forward a novel method with parallel ICEO vortices to manipulate micro/nanoscale samples for downstream detection. First, we study the extension regulation of the low-frequency electric field and mediating effect of the open BPEs on the extended electric field and characterize electric equilibrium states of microparticles and their voltage dependence. Afterward, we leverage this method to enrich nanoparticles for detection of low-abundance nanoparticles with about 20- and 40-fold fluorescence intensities by integrating with a simple fiber-optic sensor. Furthermore, this technique is engineered for the selection of targeted microalgae to continuously detect their proliferation behaviors by combining with a homemade electrical impedance spectroscopy device. This method can reinforce the throughput of ICEO vortices and enables it to integrate with simple and economical sensors to accomplish disease diagnosis and environmental monitoring.

Tunable magnetophoretic method for distinguishing and separating wear debris particles in an Fe-PDMS-based microfluidic chip

Wear debris analysis provides an early warning of mechanical transmission system aging and wear fault diagnosis, which has been widely used in machine health monitoring. The ability to detect and distinguish the ferromagnetic and nonmagnetic debris in oil is becoming an effective way to assess the health status of machinery. In this work, an Fe-poly(dimethylsiloxane) (PDMS)-based magnetophoretic method for the continuous separation of ferromagnetic iron particles by diameter and the isolation of ferromagnetic particles and nonmagnetic particles with similar diameter by type is developed. The particles experience magnetophoretic effects when passing through the vicinity of the Fe-PDMS where the strongest gradient of the magnetic fields exists. By choosing a relatively short distance between the magnet and the sidewall of the horizontal main channel and the length of Fe-PDMS with controlled particles flow rate, the diameter-dependent separation of ferromagnetic iron particles, that is, smaller than 7 µm, in the range of 8-12 µm, and larger than 14 µm, and the isolation of ferromagnetic iron particles and nonmagnetic aluminum particles based on opposite magnetophoretic behaviors by types are demonstrated, providing a potential method for the detection of wear debris particles with a high sensitivity and resolution and the diagnostic of mechanical system.

Sorting of heterogeneous colloids by AC-dielectrophoretic forces in a microfluidic chip with asymmetric orifices

HYPOTHESIS

The synthesis of compositionally heterogeneous particles is central to the development of complex colloidal units for self-assembly and self-propulsion. Yet, as the complexity of particles grows, synthesis becomes more prone to "errors". We hypothesize that alternating-current dielectrophoretic forces can efficiently sort Janus particles, as a function of patch size and material, and colloidal dumbbells by size.

EXPERIMENTS

We prepared Janus particles with different patch size and material by physical vapor deposition and colloidal dumbbells via capillarity-assisted particle assembly. We then performed sorting experiments in a microfluidic chip comprising electrodes with asymmetric orifices, specifically exploiting the dielectric contrast between different portions of the particles or their size difference to steer them towards different outlets.

FINDINGS

We calculated that the DEP force for Janus particles may switch from positive to negative as a function of composition at a critical AC frequency, thus enabling sorting different particles crossing the electrodes' region. The predictions are confirmed by optical microscopy experiments. We also show that intact and "broken" dumbbells can be simply separated as they experience different DEP forces. The integration of multiple asymmetric orifices leads a larger zone with high field gradient to increase separation efficiency and makes it a promising tool to select precise particle populations, isolating fractions with narrowly distributed characteristics.

On-chip dielectrophoretic device for cancer cell manipulation: A numerical and artificial neural network study

Breast cancer, as one of the most frequent types of cancer in women, imposes large financial and human losses annually. MCF-7, a well-known cell line isolated from the breast tissue of cancer patients, is usually used in breast cancer research. Microfluidics is a newly established technique that provides many benefits, such as sample volume reduction, high-resolution operations, and multiple parallel analyses for various cell studies. This numerical study presents a novel microfluidic chip for the separation of MCF-7 cells from other blood cells, considering the effect of dielectrophoretic force. An artificial neural network, a novel tool for pattern recognition and data prediction, is implemented in this research. To prevent hyperthermia in cells, the temperature should not exceed 35 °C. In the first part, the effect of flow rate and applied voltage on the separation time, focusing efficiency, and maximum temperature of the field is investigated. The results denote that the separation time is affected by both the input parameters inversely, whereas the two remaining parameters increase with the input voltage and decrease with the sheath flow rate. A maximum focusing efficiency of 81% is achieved with a purity of 100% for a flow rate of 0.2 μ L / min and a voltage of 3.1 V . In the second part, an artificial neural network model is established to predict the maximum temperature inside the separation microchannel with a relative error of less than 3% for a wide range of input parameters. Therefore, the suggested label-free lab-on-a-chip device separates the target cells with high-throughput and low voltages.

A correlation of conductivity medium and bioparticle viability on dielectrophoresis-based biomedical applications

Dielectrophoresis (DEP) bioparticle research has progressed from micro to nano levels. It has proven to be a promising and powerful cell manipulation method with an accurate, quick, inexpensive, and label-free technique for therapeutic purposes. DEP, an electrokinetic phenomenon, induces particle movement as a result of polarization effects in a nonuniform electrical field. This review focuses on current research in the biomedical field that demonstrates a practical approach to DEP in terms of cell separation, trapping, discrimination, and enrichment under the influence of the conductive medium in correlation with bioparticle viability. The current review aims to provide readers with an in-depth knowledge of the fundamental theory and principles of the DEP technique, which is influenced by conductive medium and to identify and demonstrate the biomedical application areas. The high conductivity of physiological fluids presents obstacles and opportunities, followed by bioparticle viability in an electric field elaborated in detail. Finally, the drawbacks of DEP-based systems and the outlook for the future are addressed. This article will aid in advancing technology by bridging the gap between bioscience and engineering. We hope the insights presented in this review will improve cell suspension medium and promote DEP-viable bioparticle manipulation for health-care diagnostics and therapeutics.

Image-based cell sorting using focused travelling surface acoustic waves

Sorting cells is an essential primary step in many biological and clinical applications such as high-throughput drug screening, cancer research and cell transplantation. Cell sorting based on their mechanical properties has long been considered as a promising label-free biomarker that could revolutionize the isolation of cells from heterogeneous populations. Recent advances in microfluidic image-based cell analysis combined with subsequent label-free sorting by on-chip actuators demonstrated the possibility of sorting cells based on their physical properties. However, the high purity of sorting is achieved at the expense of a sorting rate that lags behind the analysis throughput. Furthermore, stable and reliable system operation is an important feature in enabling the sorting of small cell fractions from a concentrated heterogeneous population. Here, we present a label-free cell sorting method, based on the use of focused travelling surface acoustic wave (FTSAW) in combination with real-time deformability cytometry (RT-DC). We demonstrate the flexibility and applicability of the method by sorting distinct blood cell types, cell lines and particles based on different physical parameters. Finally, we present a new strategy to sort cells based on their mechanical properties. Our system enables the sorting of up to 400 particles per s. Sorting is therefore possible at high cell concentrations (up to 36 million per ml) while retaining high purity (>92%) for cells with diverse sizes and mechanical properties moving in a highly viscous buffer. Sorting of small cell fraction from a heterogeneous population prepared by processing of small sample volume (10 μl) is also possible and here demonstrated by the 667-fold enrichment of white blood cells (WBCs) from raw diluted whole blood in a continuous 10-hour sorting experiment. The real-time analysis of multiple parameters together with the high sensitivity and high-throughput of our method thus enables new biological and therapeutic applications in the future.

DC-Dielectrophoretic Manipulation and Isolation of Microplastic Particle-Treated Microalgae Cells in Asymmetric-Orifice-Based Microfluidic Chip

A novel direct-current dielectrophoretic (DC-DEP) method is proposed for the manipulation and isolation of microplastic particle (MP)-treated microalgae cells according to their dielectric properties in a microfluidic chip. The lateral migration and trajectory of the microalgae cells were investigated. To induce stronger DC-DEP effects, a non-homogeneous electric-field gradient was generated by applying the DC electric voltages through triple pairs of asymmetric orifices with three small orifices and one large orifice located on the opposite microchannel wall across the whole channel, leading to the enhanced magnitude of the non-uniform electric-field gradient and effective dielectrophoretic area. The effects of the applied voltage, the polystyrene (PS) adsorption coverage, and thickness on the DC-DEP behaviors and migration were numerically investigated, and it was found that the effect of the PS adsorption thickness of the Chlorella cells on the DC-DEP behaviors can be neglected, but the effect on their trajectory shifts cannot. In this way, the separation of 3 µm and 6 µm Chlorella coated with 100% PS particles and the isolation of the Chlorella cells from those coated with various coverages and thicknesses of PS particles was successfully achieved, providing a promising method for the isolation of microalgae cells and the removal of undesired cells from a target suspension.

Computer-Vision-Based Dielectrophoresis Mobility Tracking for Characterization of Single-Cell Biophysical Properties

Fast and precise measurements of live single-cell biophysical properties is significant in disease diagnosis, cytopathologic analysis, etc. Existing methods still suffer from unsatisfied measurement accuracy and low efficiency. We propose a computer vision method to track cell dielectrophoretic movements on a microchip, enabling efficient and accurate measurement of biophysical parameters of live single cells, including cell radius, cytoplasm conductivity, and cell-specific membrane capacitance, and in situ extraction of cell texture features. We propose a prediction-iteration method to optimize the cell parameter measurement, achieving high accuracy (less than 0.79% error) and high efficiency (less than 30 s). We further propose a hierarchical classifier based on a support vector machine and implement cell classification using acquired cell physical parameters and texture features, achieving high classification accuracies for identifying cell lines from different tissues, tumor and normal cells, different tumor cells, different leukemia cells, and tumor cells with different malignancies. The method is label-free and biocompatible, allowing further live cell studies on a chip, e.g., cell therapy, cell differentiation, etc.

Implementation of an Integrated Dielectrophoretic and Magnetophoretic Microfluidic Chip for CTC Isolation

Identification of circulating tumor cells (CTCs) from a majority of various cell pools has been an appealing topic for diagnostic purposes. This study numerically demonstrates the isolation of CTCs from blood cells by the combination of dielectrophoresis and magnetophoresis in a microfluidic chip. Taking advantage of the label-free property, the separation of red blood cells, platelets, T cells, HT-29, and MDA-231 was conducted in the microchannel. By using the ferromagnet structure with double segments and a relatively shorter distance in between, a strong gradient of the magnetic field, i.e., sufficiently large MAP forces acting on the cells, can be generated, leading to a high separation resolution. In order to generate strong DEP forces, the non-uniform electric field gradient is induced by applying the electric voltage through the microchannel across a pair of asymmetric orifices, i.e., a small orifice and a large orifice on the opposite wall of the channel sides. The distribution of the gradient of the magnetic field near the edge of ferromagnet segments, the gradient of the non-uniform electric field in the vicinity of the asymmetric orifices, and the flow field were investigated. In this numerical simulation, the effects of the ferromagnet structure on the magnetic field, the flow rate, as well as the strength of the electric field on their combined magnetophoretic and dielectrophoretic behaviors and trajectories are systemically studied. The simulation results demonstrate the potential of both property- and size-based cell isolation in the microfluidic device by implementing magnetophoresis and dielectrophoresis.

Signal-Based Methods in Dielectrophoresis for Cell and Particle Separation

Separation and detection of cells and particles in a suspension are essential for various applications, including biomedical investigations and clinical diagnostics. Microfluidics realizes the miniaturization of analytical devices by controlling the motion of a small volume of fluids in microchannels and microchambers. Accordingly, microfluidic devices have been widely used in particle/cell manipulation processes. Different microfluidic methods for particle separation include dielectrophoretic, magnetic, optical, acoustic, hydrodynamic, and chemical techniques. Dielectrophoresis (DEP) is a method for manipulating polarizable particles' trajectories in non-uniform electric fields using unique dielectric characteristics. It provides several advantages for dealing with neutral bioparticles owing to its sensitivity, selectivity, and noninvasive nature. This review provides a detailed study on the signal-based DEP methods that use the applied signal parameters, including frequency, amplitude, phase, and shape for cell/particle separation and manipulation. Rather than employing complex channels or time-consuming fabrication procedures, these methods realize sorting and detecting the cells/particles by modifying the signal parameters while using a relatively simple device. In addition, these methods can significantly impact clinical diagnostics by making low-cost and rapid separation possible. We conclude the review by discussing the technical and biological challenges of DEP techniques and providing future perspectives in this field.

Piezoelectricity induced by pulsed hydraulic pressure enables in situ membrane demulsification and oil/water separation

Recovering oil from oily wastewater is not only for economic gains but also for mitigating environmental pollution. However, demulsification of oil droplets stabilized with surfactants is challenging because of their low surface energy. Although the widely used oil/water separation membrane technologies based on size screening have attracted considerable attention in the past few decades, they are incapable of demulsification of stabilized oil emulsions and the membrane concentrates often require post-processing. Herein, the piezoelectric ceramic membrane (PCM), which can respond to the inherent transmembrane pressure in the pressure-driven membrane processes, was employed to transform hydraulic pressure pulses into electroactive responses to in situ demulsification. The pulsed transmembrane pressure on the PCM results in the generation of considerable rapid voltage oscillations over 3.2 V and a locally high electric field intensity of 7.2 × 10⁷ V/m, which is capable of electrocoalescence with no additional stimuli or high voltage devices. Negative dielectrophoresis (DEP) force occurred in this membrane process and repelled the large size of oil after demulsification away from the PCM surface, ensuring continuous membrane demulsification and oil/water separation. Overall, PCM provides a further opportunity to develop an environmentally friendly and energy-saving electroresponsive membrane technology for practical applications in wastewater treatment.

Separation and characterization of microplastic and nanoplastic particles in marine environment

Microplastics (<5 mm) are divided into primary and secondary microplastics, which are further degraded into nanoplastics. The microplastic particles are widely distributed in marine environment, terrestrial ecosystem and biological organism, leading to damages to whole environmental system. Microplastics are not only difficult to degrade, but also able to adsorb pollutants. Due to the tiny size and various properties, the separation and characterization of microplastic particles has become more and more challenging. This review introduces the sources and destinations of the microplastic particles and summarizes the general methods for the sorting and characterization of microplastics, especially the manipulation of microplastic particles on microfluidic chip, showing possibility to deal with smaller nanoplastic particles over traditional methods. This review focuses on studies of the size-based separation and property-dependent characterization of microplastics in marine environment by utilizing the microfluidic chip device.

Multiphysics microfluidics for cell manipulation and separation: a review

Multiphysics microfluidics, which combines multiple functional physical processes in a microfluidics platform, is an emerging research area that has attracted increasing interest for diverse biomedical applications. Multiphysics microfluidics is expected to overcome the limitations of individual physical phenomena through combining their advantages. Furthermore, multiphysics microfluidics is superior for cell manipulation due to its high precision, better sensitivity, real-time tunability, and multi-target sorting capabilities. These exciting features motivate us to review this state-of-the-art field and reassess the feasibility of coupling multiple physical processes. To confine the scope of this paper, we mainly focus on five common forces in microfluidics: inertial lift, elastic, dielectrophoresis (DEP), magnetophoresis (MP), and acoustic forces. This review first explains the working mechanisms of single physical phenomena. Next, we classify multiphysics techniques in terms of cascaded connections and physical coupling, and we elaborate on combinations of designs and working mechanisms in systems reported in the literature to date. Finally, we discuss the possibility of combining multiple physical processes and associated design schemes and propose several promising future directions.

Progress of Microfluidic Continuous Separation Techniques for Micro-/Nanoscale Bioparticles

Separation of micro- and nano-sized biological particles, such as cells, proteins, and nucleotides, is at the heart of most biochemical sensing/analysis, including in vitro biosensing, diagnostics, drug development, proteomics, and genomics. However, most of the conventional particle separation techniques are based on membrane filtration techniques, whose efficiency is limited by membrane characteristics, such as pore size, porosity, surface charge density, or biocompatibility, which results in a reduction in the separation efficiency of bioparticles of various sizes and types. In addition, since other conventional separation methods, such as centrifugation, chromatography, and precipitation, are difficult to perform in a continuous manner, requiring multiple preparation steps with a relatively large minimum sample volume is necessary for stable bioprocessing. Recently, microfluidic engineering enables more efficient separation in a continuous flow with rapid processing of small volumes of rare biological samples, such as DNA, proteins, viruses, exosomes, and even cells. In this paper, we present a comprehensive review of the recent advances in microfluidic separation of micro-/nano-sized bioparticles by summarizing the physical principles behind the separation system and practical examples of biomedical applications.

A flow-through microfluidic chip for continuous dielectrophoretic separation of viable and non-viable human T-cells

Effective methods for rapid sorting of cells according to their viability are critical in T cells based therapies to prevent any risk to patients. In this context, we present a novel microfluidic device that continuously separates viable and non-viable T-cells according to their dielectric properties. A dielectrophoresis (DEP) force is generated by an array of castellated microelectrodes embedded into a microfluidic channel with a single inlet and two outlets; cells subjected to positive DEP forces are drawn toward the electrodes array and leave from the top outlet, those subjected to negative DEP forces are repelled away from the electrodes and leave from the bottom outlet. Computational fluid dynamics is used to predict the device separation efficacy, according to the applied alternative current (AC) frequency, at which the cells move from/to a negative/positive DEP region and the ionic strength of the suspension medium. The model is used to support the design of the operational conditions, confirming a separation efficiency, in terms of purity, of 96% under an applied AC frequency of 1.5 × 10⁶  Hz and a flow rate of 20 μl/h. This work represents the first example of effective continuous sorting of viable and non-viable human T-cells in a single-inlet microfluidic chip, paving the way for lab-on-a-chip applications at the point of need.

[Research progress in the application of external field separation technology and microfluidic technology in the separation of micro/nanoscales]

The micro/nanoscales concerns interactions of entities with sizes in the range of 0.1-100 μm, such as biological cells, proteins, and particles. The separation of micro/nanoscales has been of immense significance for drug development, early-stage cancer detection, and customized precision therapy. For example, in recent years, rapid advances in the field of cell therapy have necessitated the development of simple and effective cell separation techniques. The isolation technique allows the collection of the required stem cells from complex samples. With the development of materials science and precision medicine, the separation of particles is also critical. The key physicochemical properties of micro/nanoscales are highly dependent on their specific size, shape, functional group, and mobility (based on the charged characteristics), which control their performance in the separation system. The current demand has made the simultaneous innovation of a separation system and an on-line detection platform imperative. Accordingly, various analytical methods involving the use of external forces, such as the flow field, magnetic field, electric field, and acoustic field, have been used for micro/nanoscales separation. Based on the physical and chemical parameters of the separation materials, these analytical methods can select different external force fields for micro/nanoscales separation, enabling real-time, accurate, efficient, and selective separation. However, at present, most of the applied field separation technologies require complex equipment and a large sample amount. This makes it crucial to miniaturize and integrate separation technologies for low-cost, rapid, and accurate micro/nanoscales separation. Microfluidic technology is a representative micro/nanoscales separation technology. It requires only a small volume of liquid, making it cost-effective; its high throughput enables continuous separation and analysis; its fast response in a microchip can allow many reactions; and finally, the miniaturization of the device allows the coupling of multiple detectors with the microchip. With the continuous growth and progress of microfluidic technology, some microfluidic platforms are now able to achieve the non-destructive separation of cells. They also enable on-line detection, offer high separation efficiency, and allow rapid separation for different biological samples. This review primarily summarizes recent advances in microfluidic chips based on flow field, electric field, magnetic field, acoustic field, and field separation technologies to improve the micro/nanoscales separation efficiency. This review also discusses the various external force fields of micro/nanoscales, such as a microparticle, single cell separation of substances classified introduction, and summarizes the advantages and disadvantages of their application and development. Finally, the prospect of the combined application of external field separation technology and microfluidic technology in the early screening of cancer cells and for precise micro/nanoscales separation is discussed, and the advantages and potential applications of the combined technology are proposed.

Methods of Generating Dielectrophoretic Force for Microfluidic Manipulation of Bioparticles

Manipulation of microscale bioparticles including living cells is of great significance to the broad bioengineering and biotechnology fields. Dielectrophoresis (DEP), which is defined as the interactions between dielectric particles and the electric field, is one of the most widely used techniques for the manipulation of bioparticles including cell separation, sorting, and trapping. Bioparticles experience a DEP force if they have a different polarization from the surrounding media in an electric field that is nonuniform in terms of the intensity and/or phase of the electric field. A comprehensive literature survey shows that the DEP-based microfluidic devices for manipulating bioparticles can be categorized according to the methods of creating the nonuniformity via patterned microchannels, electrodes, and media to generate the DEP force. These methods together with the theory of DEP force generation are described in this review, to provide a summary of the methods and materials that have been used to manipulate various bioparticles for various specific biological outcomes. Further developments of DEP-based technologies include identifying materials that better integrate with electrodes than current popular materials (silicone/glass) and improving the performance of DEP manipulation of bioparticles by combining it with other methods of handling bioparticles. Collectively, DEP-based microfluidic manipulation of bioparticles holds great potential for various biomedical applications.

Rapid and precise tumor cell separation using the combination of size-dependent inertial and size-independent magnetic methods

Circulating tumor cells (CTCs) play a significant role in cancer diagnosis and treatment monitoring. One of the major challenges in isolating and detecting rare CTCs from blood is that white blood cells (WBCs) have a size overlap with the target CTCs. To address this issue, we constructed a three-stage i-Mag device integrated with passive inertial microfluidics and active magnetophoresis, enabling rapid and precise separation of tumor cells from blood. The first-stage spiral inertial sorter was applied to rapidly remove small-sized red blood cells (RBCs), and then the second-stage serpentine inertial focuser and the third-stage magnetic sorter were used for removing the magnetically labeled WBCs size-independently, to significantly purify the captured tumor cells. Then, the separation performance of our i-Mag device was explored. The results indicated rapid and precise separation of breast cancer cells from diluted whole blood at a high separation efficiency of 93.84% and at a high purity of 51.47%. The purity of the collected tumor cells could be further improved to 93.60% when the blood dilution ratio was increased. We also successfully applied our i-Mag device for the isolation and detection of trace tumor cells. Our i-Mag device has numerous advantages, such as enabling high-throughput processing and high-precision separation, requiring easy manufacturing at a low cost, and providing tumor antigen-independent operation. We believe that the i-Mag device has great potential to act as a precise tool for separating various bioparticles.

Self-aligned sequential lateral field non-uniformities over channel depth for high throughput dielectrophoretic cell deflection

Dielectrophoresis (DEP) enables the separation of cells based on subtle subcellular phenotypic differences by controlling the frequency of the applied field. However, current electrode-based geometries extend over a limited depth of the sample channel, thereby reducing the throughput of the manipulated sample (sub-μL min-1 flow rates and <105 cells per mL). We present a flow through device with self-aligned sequential field non-uniformities extending laterally across the sample channel width (100 μm) that are created by metal patterned over the entire depth (50 μm) of the sample channel sidewall using a single lithography step. This enables single-cell streamlines to undergo progressive DEP deflection with minimal dependence on the cell starting position, its orientation versus the field and intercellular interactions. Phenotype-specific cell separation is validated (>μL min-1 flow and >106 cells per mL) using heterogeneous samples of healthy and glutaraldehyde-fixed red blood cells, with single-cell impedance cytometry showing that the DEP collected fractions are intact and exhibit electrical opacity differences consistent with their capacitance-based DEP crossover frequency. This geometry can address the vision of an "all electric" selective cell isolation and cytometry system for quantifying phenotypic heterogeneity of cellular systems.

On the design, functions, and biomedical applications of high-throughput dielectrophoretic micro-/nanoplatforms: a review

As an efficient, rapid and label-free micro-/nanoparticle separation technique, dielectrophoresis (DEP) has attracted widespread attention in recent years, especially in the field of biomedicine, which exhibits huge potential in biomedically relevant applications such as disease diagnosis, cancer cell screening, biosensing, and others. DEP technology has been greatly developed recently from the low-flux laboratory level to high-throughput practical applications. In this review, we summarize the recent progress of DEP technology in biomedical applications, including firstly the design of various types and materials of DEP electrode and flow channel, design of input signals, and other improved designs. Then, functional tailoring of DEP systems with endowed specific functions including separation, purification, capture, enrichment and connection of biosamples, as well as the integration of multifunctions, are demonstrated. After that, representative DEP biomedical application examples in aspects of disease detection, drug synthesis and screening, biosensing and cell positioning are presented. Finally, limitations of existing DEP platforms on biomedical application are discussed, in which emphasis is given to the impact of other electrodynamic effects such as electrophoresis (EP), electroosmosis (EO) and electrothermal (ET) effects on DEP efficiency. This article aims to provide new ideas for the design of novel DEP micro-/nanoplatforms with desirable high throughput toward application in the biomedical community.

Dielectrophoresis: Developments and applications from 2010 to 2020

The 20th century has seen tremendous innovation of dielectrophoresis (DEP) technologies, with applications being developed in areas ranging from industrial processing to micro- and nanoscale biotechnology. From 2010 to present day, there have been 981 publications about DEP. Of over 2600 DEP patents held by the United States Patent and Trademark Office, 106 were filed in 2019 alone. This review focuses on DEP-based technologies and application developments between 2010 and 2020, with an aim to highlight the progress and to identify potential areas for future research. A major trend over the last 10 years has been the use of DEP techniques for biological and clinical applications. It has been used in various forms on a diverse array of biologically derived molecules and particles to manipulate and study them including proteins, exosomes, bacteria, yeast, stem cells, cancer cells, and blood cells. DEP has also been used to manipulate nano- and micron-sized particles in order to fabricate different structures. The next 10 years are likely to see the increase in DEP-related patent applications begin to result in a greater level of technology commercialization. Also during this time, innovations in DEP technology will likely be leveraged to continue the existing trend to further biological and medical-focused applications as well as applications in microfabrication. As a tool leveraged by engineering and imaginative scientific design, DEP offers unique capabilities to manipulate small particles in precise ways that can help solve problems and enable scientific inquiry that cannot be addressed using conventional methods.

Cell properties assessment using optimized dielectrophoresis-based cell stretching and lumped mechanical modeling

Cells mechanical property assessment has been a promising label-free method for cell differentiation. Several methods have been proposed for single-cell mechanical properties analysis. Dielectrophoresis (DEP) is one method used for single-cell mechanical property assessment, cell separation, and sorting. DEP method has overcome weaknesses of other techniques, including compatibility with microfluidics, high throughput assessment, and high accuracy. However, due to the lack of a general and explicit model for this method, it has not been known as an ideal cell mechanical property evaluation method. Here we present an explicit model using the most general electromagnetic equation (Maxwell Stress Tensor) for single-cell mechanical evaluation based on the DEP method. For proof of concept, we used the proposed model for differentiation between three different types of cells, namely erythrocytes, peripheral blood mononuclear cells (PBMC), and an epithelial breast cancer cells line (T-47D). The results show that, by a lumped parameter that depends on cells' mechanical and electrical properties, the proposed model can successfully distinguish between the mentioned cell types that can be in a single blood sample. The proposed model would open up the chance to use a mechanical assessment method for cell searching in parallel with other methods.

Simultaneous and continuous particle separation and counting via localized DC-dielectrophoresis in a microfluidic chip

A novel microfluidic method of counting the number of particles while they are separated by a localized DC-dielectrophoresis force was presented. Liquid flow from a wide microchannel forces the to-be-detected particles to pass over a small orifice on a side wall of the sample input channel. A direct current (DC) voltage applied across the small orifice and a strong electric field gradient is generated at the corners of the orifice for dielectrophoretic particle separation. Particle counting is achieved by detecting the electric current change caused by the being-separated particle near the sensing orifice. In this way, particles can be separate and in situ counted at the same time. Numerical simulations show that particle separation is achieved at the edge of the sensing orifice where the strength of the electric field gradient is the largest. Separation and counting of polystyrene particles of two and three different sizes with 1 μm resolution were demonstrated experimentally.

Wirelessly powered dielectrophoresis of metal oxide particles using spark-gap Tesla coil

Wirelessly powered dielectrophoresis (DEP) of metal oxide particles was performed using a spark-gap Tesla coil (TC). The main contribution of this work is the simplification of the conventional DEP setup that requires attaching wires directly to the electrodes. Wireless power from the TC generates a high output frequency and voltage, which corresponds to that used for the DEP. Therefore, a spark-gap TC was built and utilized to conduct the DEP process. Metal oxides (ZnO and Fe2O3) were used as targets for the assembly. The results showed that the wirelessly powered DEP technique via a TC was successful in assembling the metal oxide particles. Positive and negative DEP phenomena were observed. Positive DEP occurred during ZnO assembly, making particles chain grow 0.92 mm toward the sparks within 60 s. Negative DEP was observed during Fe2O3 assembly, where the repulsion of particles formed a void around the sparks with a 1.45 mm radius. The mechanism of this wireless DEP system is discussed.

Biosensors Based on Mechanical and Electrical Detection Techniques

Biosensors are powerful analytical tools for biology and biomedicine, with applications ranging from drug discovery to medical diagnostics, food safety, and agricultural and environmental monitoring. Typically, biological recognition receptors, such as enzymes, antibodies, and nucleic acids, are immobilized on a surface, and used to interact with one or more specific analytes to produce a physical or chemical change, which can be captured and converted to an optical or electrical signal by a transducer. However, many existing biosensing methods rely on chemical, electrochemical and optical methods of identification and detection of specific targets, and are often: complex, expensive, time consuming, suffer from a lack of portability, or may require centralised testing by qualified personnel. Given the general dependence of most optical and electrochemical techniques on labelling molecules, this review will instead focus on mechanical and electrical detection techniques that can provide information on a broad range of species without the requirement of labelling. These techniques are often able to provide data in real time, with good temporal sensitivity. This review will cover the advances in the development of mechanical and electrical biosensors, highlighting the challenges and opportunities therein.

Scaling of deterministic lateral displacement devices to a single column of bumping obstacles

We describe a deterministic lateral displacement (DLD) for particle separation with only a single column of bumping features. The bifurcation of fluid streams at obstacles is not set by the "tilt" of columns with respect to macroscopic current flow, but rather by the fluidic resistances for lateral flow at each obstacle. With one column of 14 bumping features and corresponding inlet/outlet channels, the single-column DLD can separate particles with diameters of 4.8 μm and 9.9 μm at 30 μL min^-1, with an area of only 0.37 mm × 1.5 mm (0.55 mm²). The large-cell output contains over 99% of the 9.9 μm particles and only 0.2% of the 4.8 m particles. The throughput per area of 54 μL min^-1 per mm² represents a 10× increase over previous selective harvesting reports for microfluidic devices in a similar particle size range.

Dielectrophoretic Separation of Particles Using Microfluidic Chip with Composite Three-Dimensional Electrode

Integrating three-dimensional (3D) microelectrodes on microfluidic chips based on polydimethylsiloxane (PDMS) has been a challenge. This paper introduces a composite 3D electrode composed of Ag powder (particle size of 10 nm) and PDMS. Ethyl acetate is added as an auxiliary dispersant during the compounding process. A micromachining technique for processing 3D microelectrodes of any shape and size was developed to allow the electrodes to be firmly bonded to the PDMS chip. Through theoretical calculations, numerical simulations, and experimental verification, the role of the composite 3D microelectrodes in separating polystyrene particles of three different sizes via dielectrophoresis was systematically studied. This microfluidic device separated 20-, 10-, and 5-μm polystyrene particles nondestructively, efficiently, and accurately.

Parametric study on the geometrical parameters of a lab-on-a-chip platform with tilted planar electrodes for continuous dielectrophoretic manipulation of microparticles

Advances in lab-on-a-chip (LOC) devices have led to significant improvements in the on-chip manipulation, separation, sorting, and isolation of particles and cells. Among various LOC-based approaches such as inertia-based methods, acoustophoresis, and magnetophoresis, the planar-slanted-electrode dielectrophoresis (DEP) method has demonstrated great potential as a label-free, cost-effective, and user-friendly approach. However, the devices built based on this method suffer from low flow throughput compared to devices functioning based on other LOC-based manipulation approaches. In order to overcome this obstacle, the geometrical parameters of these types of DEP-based devices must be studied to increase the effectiveness of DEP manipulation. With the consideration of both numerical and experimental studies, this paper studies the geometrical factors of a LOC platform consisting of tilted planar electrodes with the goal of achieving higher throughput in continuous manipulation of polystyrene particles. COMSOL Multiphysics software was used to study the effect of the electrodes geometry on the induced electric field. The simulation results show that by increasing the electrode's width and decreasing the electrode's spacing, higher DEP force is generated. Furthermore, the experimental outcomes indicated that lower channel height, higher voltage, and larger particle size resulted in the most improvement to DEP manipulation. Additionally, the experimental results demonstrated that slanted electrodes with an angle of 8° with respect to the direction of flow provide a more effective configuration.

A one-step molded microfluidic chip featuring a two-layer silver-PDMS microelectrode for dielectrophoretic cell separation

Dielectrophoresis (DEP) is a powerful technique for label-free cell separation in microfluidics. Easily-fabricated DEP separators with low cost and short turnaround time are in extremely high demand in practical applications, especially clinical usage where disposable devices are needed. DEP separators exploiting microelectrodes made of conducting polydimethylsiloxane (PDMS) composites enable the construction of advantageous 3D volumetric electrodes with a simple soft-lithography process. Yet, existing devices incorporating microelectrodes in conducting PDMS generally have their fluidic sidewalls constructed using a different material, and consequently require extra lithography of a sacrificial layer on the semi-finished master for molding the electrode and fluidic sidewalls in separate steps. Here we demonstrate a novel microfluidic DEP separator with a 3D electrode and fluidic structure entirely integrated within silver-PDMS composites. We develop a further simplified one-step molding process with lower cost using a readily-available and reusable SU8 master, eliminating the need for the additional lithography step in existing techniques. The uniquely designed two-layer electrode exhibits a spatially non-uniform electric field that enables cell migration in the vertical direction. The electrode upper layer then offers a harbor-like region for the trapping of the target cells that have drifted upwards, which shelters them from being dragged away by the main flow streams in the lower layer, and thus allows higher operation flow rate. We also optimize the upper layer thickness as a critical dimension for protecting the trapped cells from high drag and show easy widening of our device by elongation of the digits. We demonstrate that the elongated digits involving more parallel flow paths maintain a high capture efficiency of 95.4% for live cells with 85.6% purity in the separation of live/dead HeLa cells. We also investigate the device feasibility in a viability assay for cells post anti-cancer drug treatment.

High-Sensitivity in Dielectrophoresis Separations

The applications of dielectrophoretic (DEP) techniques for the manipulation of cells in a label-free fashion within microfluidic systems continue to grow. However, a limited number of methods exist for making highly sensitive separations that can isolate subtle phenotypic differences within a population of cells. This paper explores efforts to leverage that most compelling aspect of DEP—an actuation force that depends on particle electrical properties—in the background of phenotypic variations in cell size. Several promising approaches, centering around the application of multiple electric fields with spatially mapped magnitude and/or frequencies, are expanding the capability of DEP cell separation.

High-throughput dynamical analysis of dielectrophoretic frequency dispersion of single cells based on deflected flow streamlines

Phenotypic quantification of cells based on their plasma membrane capacitance and cytoplasmic conductivity, as determined by their dielectrophoretic frequency dispersion, is often used as a marker for their biological function. However, due to the prevalence of phenotypic heterogeneity in many biological systems of interest, there is a need for methods capable of determining the dielectrophoretic dispersion of single cells at high throughput and without the need for sample dilution. We present a microfluidic device methodology wherein localized constrictions in the microchannel are used to enhance the field delivered by adjoining planar electrodes, so that the dielectrophoresis level and direction on flow-focused cells can be determined on each traversing cell in a high-throughput manner based on their deflected flow streamlines. Using a sample of human red blood cells diluted to 2.25 × 10⁸ cells/mL, the dielectrophoretic translation of single cells traversing at a flow rate of 1.68 μL/min is measured at a throughput of 1.1 × 10⁵ cells/min, to distinguish positive versus negative dielectrophoresis and determine their crossover frequency in media of differing conductivity for validation of the computed membrane capacitance to that from prior methods. We envision application of this dynamic dielectrophoresis (Dy-DEP) method towards high-throughput measurement of the dielectric dispersion of single cells to stratify phenotypic heterogeneity of a particular sample based on their DEP crossover frequency, without the need for significant sample dilution. Grapical abstract.

Thermal Shock Response of Yeast Cells Characterised by Dielectrophoresis Force Measurement

Dielectrophoresis is an electric force experienced by particles subjected to non-uniform electric fields. Recently, several technologies have been developed focused on the use of dielectrophoretic force (DEP) to manipulate and detect cells. On the other hand, there is no such great development in the field of DEP-based cell discrimination methods. Despite the demand for methods to differentiate biological cell states, most DEP developed methods have been focused on differentiation through geometric parameters. The novelty of the present work relies upon the point that a DEP force cell measurement is used as a discrimination method, capable of detecting heat killed yeast cells from the alive ones. Thermal treatment is used as an example of different biological state of cells. It comes from the fact that biological properties have their reflection in the electric properties of the particle, in this case a yeast cell. To demonstrate such capability of the method, 279 heat-killed cells were measured and compared with alive cells data from the literature. For each cell, six speeds were taken at different points in its trajectory inside a variable non-uniform electric field. The electric parameters in cell wall conductivity, cell membrane conductivity, cell membrane permittivity of the yeast cell from bibliography explains the DEP experimental force measured. Finally, alive and heat-treated cells were distinguished based on that measure. Our results can be explained through the well-known damage of cell structure characteristics of heat-killed cells.