Metal Ion Mediated Cellulose Nanofibrils Transient Network in Covalently Cross-linked Hydrogels: Mechanistic Insight into Morphology and Dynamics

The Impact of Green Physical Crosslinking Methods on the Development of Sericin-Based Biohydrogels for Wound Healing

Silk sericin (SS)-based hydrogels show promise for wound healing due to their biocompatibility, moisture regulation, and cell proliferation properties. However, there is still a need to develop green crosslinking methods to obtain non-toxic, absorbent, and mechanically strong SS hydrogels. This study investigated the effects of three green crosslinking methods, annealing treatment (T), exposure to an absolute ethanol vapor atmosphere (V.E), and water vapor (V.A), on the physicochemical and mechanical properties of SS and poly (vinyl alcohol) (PVA) biohydrogels. X-ray diffraction and Fourier-transform infrared spectroscopy were used to determine chemical structures. Thermal properties and morphological changes were studied through thermogravimetric analysis and scanning electron microscopy, respectively. The water absorption capacity, mass loss, sericin release in phosphate-buffered saline (PBS), and compressive strength were also evaluated. The results showed that physical crosslinking methods induced different structural transitions in the biohydrogels, impacting their mechanical properties. In particular, V.A hydrogen presented the highest compressive strength at 80% deformation owing to its compact and porous structure with crystallization and bonding sites. Moreover, both the V.A and T hydrogels exhibited improved absorption capacity, stability, and slow SS release in PBS. These results demonstrate the potential of green physical crosslinking techniques for producing SS/PVA biomaterials for wound healing applications.

Carboxymethyl chitosan composited poly(ethylene oxide) electrolyte with high ion conductivity and interfacial stability for lithium metal batteries

Low ionic conductivity and poor interface stability of poly(ethylene oxide) (PEO) restrict the practical application as polymeric electrolyte films to prepare solid-state lithium (Li) metal batteries. In this work, biomass-based carboxymethyl chitosan (CMCS) is designed and developed as organic fillers into PEO matrix to form composite electrolytes (PEO@CMCS). Carboxymethyl groups of CMCS fillers can promote the decomposition of Lithium bis(trifluoromethane sulfonimide) (LiTFSI) to generate more lithium fluoride (LiF) at CMCS/PEO interface, which not only forms ionic conductive network to promote the rapid transfer of Li+ but also effectively enhances the interface stability between polymeric electrolyte and Li metal. The enrichment of carboxyl, hydroxyl, and amidogen functional groups within CMCS fillers can form hydrogen bonds with ethylene oxide (EO) chains to improve the tensile properties of PEO-based electrolyte. In addition, the high hardness of CMCS additives can also strengthen mechanical properties of PEO-based electrolyte to resist penetration of Li dendrites. LiLi symmetric batteries can achieve stable cycle for 2500 h and lithium iron phosphate full batteries can maintain 135.5 mAh g-1 after 400 cycles. This work provides a strategy for the enhancement of ion conductivity and interface stability of PEO-based electrolyte, as well as realizes the resource utilization of biomass-based CMCS.

A universal solvent-replacement strategy to convert alginate hydrogels into mechanically strong and transparent alginate eutectogels for sensitive strain sensors

Eutectogels based on natural polymers have attracted significant attention as an alternative to easily dehydrated hydrogels and expensive ionogels in the development of flexible strain sensors. The feasibility of employing eutectogels derived from pure natural polymers could be greatly enhanced if their mechanical properties satisfy the requirements of applications. Herein, alginate eutectogels (AEs) with high mechanical properties (tensile strain 217 % and strength 2.26 MPa at fracture), and excellent transparency (over 90 %) are acquired via CaCl2 inducing ionic crosslinking and subsequent deep eutectic solvents (DESs, composed of glycerol and choline chloride) initiating physical crosslinking with a universal solvent- replacement strategy. Among them, sodium alginate, a natural polysaccharide polymer, is selected as representative supporting scaffolds and forms water-insoluble alginate hydrogels (AHs) in CaCl2 coagulation bath. The exchange of DESs with water of AHs not only restrengthens the polymer network by physical crosslinking, but also endows the obtained AEs with long-term solvent retention and high temperature resistance. In addition, the AEs not only have high reliability but also exhibit better linear sensitivity in a wide strain range (0-200 %). In particular, the AEs display multiple sensitivity to stretching, bending, and human motions, demonstrating feasibility as sensitive strain sensors.

Stretchable, antifatigue, and intelligent nanocellulose hydrogel colorimetric film for real-time visual detection of beef freshness

The use of biopolymers as matrices and anthocyanins as pH-sensing indicators has generated increasing interest in freshness detection. Nevertheless, the weak mechanical properties and color stability of biopolymer-based smart packaging systems restrict their practicality. In this study, a nanocellulose hydrogel colorimetric film with enhanced stretchability, antifatigue properties, and color stability was prepared using soy hull nanocellulose (SHNC), polyvinyl alcohol (PVA), sodium alginate (SA), and anthocyanin (Anth) as raw materials. This hydrogel colorimetric film was used to detect beef freshness. The structure and properties (e.g., mechanical, thermal stability and hydrophobicity) of these hydrogel colorimetric films were characterized using different techniques. Fourier-transform infrared spectroscopy revealed the presence of hydrogen and ester bonds in the hydrogel colorimetric films, whereas scanning electron microscopy revealed the fish scale-like and honeycomb network structure of the hydrogel colorimetric films. Mechanical testing demonstrated that the SHNC/PVA/SA/Anth-2 hydrogel colorimetric film exhibited excellent tensile properties (elongation = 261 %), viscoelasticity (storage modulus of 11.25 kPa), and mechanical strength (tensile strength = 154 kPa), and the hydrogel colorimetric film exhibited excellent mechanical properties after repeated tensile tests. Moreover, the hydrogel colorimetric film had high transparency, excellent anti-UV linearity, thermal stability and hydrophobicity, and had displayed visually discernible color response to pH buffer solution and volatile NH3 by naked eyes, which was highly correlated with the TVB-N and pH values. Notably, the release of anthocyanin in distilled water decreased from 81.23 % to 19.87 %. The designed SHNC/PVA/SA/Anth hydrogel colorimetric films exhibited potential application as smart packaging film or gas-sensing labels in monitoring the freshness of meat products.

Ultra-strong, nonfreezing, and flexible strain sensors enabled by biomass-based hydrogels through triple dynamic bond design

Biomass-based hydrogels have displayed excellent potential in flexible strain sensors due to their adequacy, biocompatibility, nontoxic and degradability. Nevertheless, their inferior mechanical properties, particularly at cryogenic temperatures, impeded their extensive utilization. Herein, we reported a rationally designed strain sensor fabricated from a gelatin and cellulose-derived hydrogel with superior mechanical robustness, cryogenic endurance, and flexibility, owing to a triple dynamic bond strategy (TDBS), namely the synergistic reinforcement among potent hydrogen bonds, imine bonds, and sodium bonds. Beyond conventional sacrificing bonds consisting of hydrogen bonds, dynamic covalent bonds and coordinate bonds, synergetic triple dynamic bonds dominated by strong hydrogen bonds and assisted by imine and sodium bonds with higher strength can dissipate more mechanical energy endowing the hydrogel with 38-fold enhancement in tensile strength (6.4 MPa) and 39-fold improvement in toughness (2.9 MPa). We further demonstrated that this hydrogel can work as a robust and biodegradable strain sensor exhibiting remarkable flexibility, broad detection range, considerable sensitivity and excellent sensing stability. Furthermore, owing to the improved nonfreezing performance achieved from incorporating sodium salts, the sensor delivered outstanding sensing properties under subzero conditions such as -20 and -4 °C. It is anticipated that the TDBS can create diverse high-performance soft-electronics for broad applications in human-machine interfaces, energy and healthcare.

Muscle-inspired anisotropic carboxymethyl cellulose-based double-network conductive hydrogels for flexible strain sensors

Conductive hydrogels are considered one of the most promising materials for preparing flexible sensors due to their flexible and extensible properties. However, conventional hydrogels' weak mechanical and isotropic properties are greatly limited in practical applications. Here, the internal structure of the hydrogel was regulated by pre-stretching synergistic ion crosslinking to construct a carboxymethyl cellulose-based double network-oriented hydrogel similar to muscle. The introduction of pre-stretching increased the tensile strength of the double-network hydrogel from 1.45 MPa to 4.32 MPa, and its light transmittance increased from 67.3 % to 84.5 %. In addition, the hydrogel's thermal stability and electrical conductivity were improved to a certain extent. Its good mechanical properties and conductive properties can be converted into stable electrical signal output during deformation. The carboxymethyl cellulose-based double network oriented hydrogels were further assembled as flexible substrates into flexible sensor devices. The hydrogel sensors can monitor simple joint movements as well as complex spatial movements, which makes them have potential application value in the research field of intelligent response electronic devices such as flexible wearables, intelligent strain sensing, and soft robots.

Stretchable and sensitive sodium alginate ionic hydrogel fibers for flexible strain sensors

Ionic conductive hydrogel fibers based on natural polymers provide an immense focus for a new generation of electronics due to their flexibility and knittability. The feasibility of utilizing pure natural polymer-based hydrogel fibers could be drastically improved if their mechanical and transparent performances satisfy the requirements of actual practice. Herein, we report a facile fabrication strategy for significantly stretchable and sensitive sodium alginate ionic hydrogel fibers (SAIFs), by glycerol initiating physical crosslinking and by CaCl2 inducing ionic crosslinking. The obtained ionic hydrogel fibers not only show significant stretchability (tensile strength of 1.55 MPa and fracture strain of ∼161 %), but also exhibit wide-range sensing, satisfactorily stable, rapidly responsive, and multiply sensitive abilities to external stimulus. In addition, the ionic hydrogel fibers have excellent transparency (over 90 % in a wide wavelength range), and good anti-evaporation and anti-freezing properties. Furthermore, the SAIFs have been easily knitted into a textile, and successfully applied as wearable sensors to recognize human motions, by observing the output electrical signals. Our methodology for fabrication intelligent SAIFs will shed light on artificial flexible electronics and other textile-based strain sensors.

Understanding Nanocellulose-Water Interactions: Turning a Detriment into an Asset

Modern technology has enabled the isolation of nanocellulose from plant-based fibers, and the current trend focuses on utilizing nanocellulose in a broad range of sustainable materials applications. Water is generally seen as a detrimental component when in contact with nanocellulose-based materials, just like it is harmful for traditional cellulosic materials such as paper or cardboard. However, water is an integral component in plants, and many applications of nanocellulose already accept the presence of water or make use of it. This review gives a comprehensive account of nanocellulose-water interactions and their repercussions in all key areas of contemporary research: fundamental physical chemistry, chemical modification of nanocellulose, materials applications, and analytical methods to map the water interactions and the effect of water on a nanocellulose matrix.

Recent advances in cellulose microgels: Preparations and functionalized applications

Microgels are soft, deformable, permeable, and stimuli-responsive microscopic polymeric particles that are now emerging as prospective multifunctional soft materials for delivery systems, interface stabilization, cell cultures and tissue engineering. Cellulose microgels are emerging biopolymeric microgels with unique characteristics such as abound hydroxyl structure, admirable designability, multiscale pore network and excellent biocompatibility. This review summarizes the fabrication strategies for microgel, then highlights the fabrication routes for cellulose microgels, and finally elaborates cellulose microgels' bright application prospects with unique characteristics in the fields of controlled release, interface stabilization, coating, purification, nutrition/drug delivery, and bio-fabrication. The challenges to be addressed for further applications and considerable scope for development in future of cellulose microgels are also discussed.

A novel Nanocellulose-Gelatin-AS-IV external stent resists EndMT by activating autophagy to prevent restenosis of grafts

Vein grafts are widely used for coronary artery bypass grafting and hemodialysis access, but restenosis remains the "Achilles' heel" of these treatments. An extravascular stent is one wrapped around the vein graft and provides mechanical strength; it can buffer high arterial pressure and secondary vascular dilation of the vein to prevent restenosis. In this study, we developed a novel Nanocellulose-gelatin hydrogel, loaded with the drug Astragaloside IV (AS-IV) as an extravascular scaffold to investigate its ability to reduce restenosis. We found that the excellent physical and chemical properties of the drug AS-IV loaded Nanocellulose-gelatin hydrogel external stent limit graft vein expansion and make the stent biocompatible. We also found it can prevent restenosis by resisting endothelial-to-mesenchymal transition (EndMT) in vitro. It does so by activating autophagy, and AS-IV can enhance this effect both in vivo and in vitro. This study has added to existing research on the mechanism of extravascular stents in preventing restenosis of grafted veins. Furthermore, we have developed a novel extravascular stent for the prevention and treatment of restenosis. This will help optimize the clinical treatment plan of external stents and improve the prognosis in patients with vein grafts.

•

The NC-Gelatin extravascular stent has suitable physicochemical properties to prevent restenosis of the grafted veins.

•

The NC-Gelatin extravascular stent has excellent biocompatibility, which is critical for grafting veins.

•

The NC-Gelatin extravascular stent prevents restenosis by activating autophagy against EndMT.

•

AS-IV can enhance the effect of the stent to activate autophagy against EndMT.

A self-healing, recyclable and conductive gelatin/nanofibrillated cellulose/Fe3+ hydrogel based on multi-dynamic interactions for a multifunctional strain sensor

Conductive hydrogels have emerged as promising material candidates for multifunctional strain sensors, attributed to their similarity to biological tissues, good wearability, and high accuracy of information acquisition. However, it is difficult to simultaneously manufacture conductive hydrogel-based multifunctional strain sensors with the synergistic properties of reliable healability for long-term usage and environmental degradability/recyclability for decreasing the electronic waste. This work reports a facile strategy to engineer a self-healing, recyclable and conductive strain sensor by virtue of molecular-level multi-dynamic interactions (MMDIs) including Schiff base complexes, hydrogen bonds, and coordination bonds, which were fabricated using a dialdehyde TEMPO (2,2,6,6-tetramethylpiperidine-1-oxyl)-oxidized nanofibrillated cellulose (DATNFC) pre-reinforced gelatin nanocomposite hydrogel (gelatin/DATNFC hydrogel, GDH) followed by dipping in an Fe³⁺ aqueous solution. The MMDI strategy allows synchronous regulation of both bulk and interfacial interactions to obtain exciting properties that outperform those of conventional hydrogels, including extraordinary compressive stress (1310 kPa), intriguing self-healing abilities, and remarkable electrical conductivity. With these outstanding merits, the as-prepared gelatin/DATNFC/Fe³⁺ hydrogel (GDIH) is developed to be a multifunctional strain sensor with appealing strain sensitivity (GF = 2.24 under 6% strain) and compressive sensitivity (S = 1.14 kPa^-1 under 15 kPa), which can be utilized to manufacture electronic skin and accurately discern subtle bodily motions, handwriting and personal signatures. Notably, this GDIH-based sensor also exhibited reliable self-healing properties for long-term usage, environmental degradability and complete recyclability for decreasing the electronic waste. In consideration of the extremely facile preparation process, biocompatibility, satisfactory functionalities, remarkable self-healing properties and recyclability, the emergence of the GDIH-based sensor is believed to propose a new strategy for the development of sustainable-multifunctional strain sensors and healthcare monitoring.

Highly Conductive and Mechanically Robust Cellulose Nanocomposite Hydrogels with Antifreezing and Antidehydration Performances for Flexible Humidity Sensors

Conductive hydrogels are emerging as an appealing material platform for flexible electronic devices owing to their attractive mechanical flexibility and conductive properties. However, the conventional water-based conductive hydrogels tend to inevitably freeze at subzero temperature and suffer from continuous water evaporation under ambient conditions, leading to a decrease in their electrical conductivities and mechanical properties. Thus, it is extremely necessary, but generally challenging, to create an antifreezing and antidehydration conductive gel for maintaining high and stable performances in terms of electrical conductivity and mechanical properties. Herein, we fabricated a cellulose nanofibril (CNF)-reinforced and highly ion-conductive organogel featuring excellent antifreezing and antidehydration performances by immersing it in the CaCl₂/sorbitol solution for solvent displacement. The incorporation of a rigid CNF serving as a dynamic connected bridge provided a hierarchical honeycomb-like cellular structure for the obtained CS-nanocomposite (NC) organogel networks, facilitating significant mechanical reinforcement. The synergy effects of sorbitol and CaCl₂ allowed high-performance integration with excellent antifreezing tolerance, antidehydration ability, and ionic conductivity. Strong hydrogen bonds were formed between water molecules and sorbitol molecules to impede the formation of ice crystals and water evaporation, thereby imparting the CS-NC organogels with extreme-temperature tolerance as low as -50 °C and pre-eminent antidehydration performance with over 90% weight retention. Furthermore, this CS-NC organogel exhibited high humidity sensitivity in a wide humidity detection range (23∼97% relative humidity) because of the ready formation of hydrogen bonds between water molecules and numerous hydrophilic groups in the binary solvent and elaborated polymer chains, which can be assembled as a stretchable humidity sensor to monitor human respiration with a fast response. This work provides a new prospect for fabricating intrinsically stretchable and high-performance humidity sensors using cellulose-based humidity-responsive materials for the emerging wearable applications.

Composite Nanocellulose Fibers-Based Hydrogels Loading Clindamycin HCl with Ca2+ and Citric Acid as Crosslinking Agents for Pharmaceutical Applications

Biocomposite hydrogels based on nanocellulose fibers (CNFs), low methoxy pectin (LMP), and sodium alginate (SA) were fabricated via the chemical crosslinking technique. The selected CNFs-based hydrogels were loaded with clindamycin hydrochloride (CM), an effective antibiotic as a model drug. The properties of the selected CNFs-based hydrogels loaded CM were characterized. The results showed that CNFs-based hydrogels composed of CNFs/LMP/SA at 1:1:1 and 2:0.5:0.5 mass ratios exhibited high drug content, suitable gel content, and high maximum swelling degree. In vitro assessment of cell viability revealed that the CM-incorporated composite CNFs-based hydrogels using calcium ion and citric acid as crosslinking agents exhibited high cytocompatibility with human keratinocytes cells. In vitro drug release experiment showed the prolonged release of CM and the hydrogel which has a greater CNFs portion (C₂P_0.5A_0.5/Ca + Ci/CM) demonstrated lower drug release than the hydrogel having a lesser CNFs portion (C₁P₁A₁/Ca + Ci/CM). The proportion of hydrophilic materials which were low methoxy pectin and sodium alginate in the matrix system influences drug release. In conclusion, biocomposite CNFs-based hydrogels composed of CNFs/LMP/SA at 1:1:1 and 2:0.5:0.5 mass ratios, loading CM with calcium ion and citric acid as crosslinking agents were successfully developed for the first time, suggesting their potential for pharmaceutical applications, such as a drug delivery system for healing infected wounds.

Revealing the enhanced structural recovery and gelation mechanisms of cation-induced cellulose nanofibrils composite hydrogels

In this study, we fabricate physically dual-crosslinked cellulose-based hydrogels by varying coordination bonding effects with the addition of either divalent or trivalent metal cations. The first crosslinked network is created by metal-carboxylate coordination bonds between the cellulose nanofibrils that have abundant carboxyl groups and the metal cations. The second crosslinked network is formed by the reaction of tetra-functional borate ion complex and the hydroxyl groups in polyvinyl alcohol. These physically dual-crosslinked networks are strongly interwoven by non-sacrificial hydrogen bonds, this dual-crosslinked network leads to enhanced recovery characteristics in the resulting hydrogels. We use three interval thixotropic testing to investigate the deformation and recovery behaviors of the hydrogels and plot their structural deformation parameters in phase diagrams to understand the underlying complexity of energy dissipation and viscoelastic dynamics of the dual-crosslinked hydrogels.

Cellulose nanofibril as a crosslinker to reinforce the sodium alginate/chitosan hydrogels

Hydrogels derived from natural polymers have received great attention, but their practical applications are severely hindered by the relatively poor mechanical properties. In this work, cellulose nanofibril (CNF) was used as a crosslinker to reinforce the sodium alginate (SA)/chitosan (CS) hydrogels for drug sustained release. The CNF was prepared via a combined process of ball milling and deep eutectic solvents (DESs) pretreatment and characterized using SEM, FT-IR, and XRD. Furthermore, the microstructure, mechanical/biological properties and swelling performance of SA/CS/CNF hydrogels were investigated. Results showed that 1.0 wt% CNF addition led to the increases of 23.6% in storage modulus and 54.4% in loss modulus for the SA/CS/CNF hydrogels, indicating that CNF addition was effective in reinforcing the three-dimensional entangled networks of the hydrogels. Moreover, the presence of CNF was found to weaken the swelling performance of SA/CS/CNF hydrogels. When the synthesized SA/CS/CNF hydrogel with 1.0 wt% CNF was applied as a carrier for drug release, 50.8% reduction in the release rate in simulated gastric juice was achieved, demonstrating its outstanding sustained release properties. This work suggested that CNF might be conducive to enhancing the properties of SA/CS hydrogels, which can serve as an ideal polymeric carrier for drug release.

Recent Advances in the Fabrication and Environmental Science Applications of Cellulose Nanofibril-Based Functional Materials

Cellulose is one of the important biomass materials in nature and has shown wide applications in various fields from materials science, biomedicine, tissue engineering, wearable devices, energy, and environmental science, as well as many others. Due to their one-dimensional nanostructure, high specific surface area, excellent biodegradability, low cost, and high sustainability, cellulose nanofibrils/nanofibers (CNFs) have been widely used for environmental science applications in the last years. In this review, we summarize the advance in the design, synthesis, and water purification applications of CNF-based functional nanomaterials. To achieve this aim, we firstly introduce the synthesis and functionalization of CNFs, which are further extended for the formation of CNF hybrid materials by combining with other functional nanoscale building blocks, such as polymers, biomolecules, nanoparticles, carbon nanotubes, and two-dimensional (2D) materials. Then, the fabrication methods of CNF-based 2D membranes/films, three-dimensional (3D) hydrogels, and 3D aerogels are presented. Regarding the environmental science applications, CNF-based nanomaterials for the removal of metal ions, anions, organic dyes, oils, and bio-contents are demonstrated and discussed in detail. Finally, the challenges and outlooks in this promising research field are discussed. It is expected that this topical review will guide and inspire the design and fabrication of CNF-based novel nanomaterials with high sustainability for practical applications.

Dynamic nanocellulose hydrogels: Recent advancements and future outlook

Nanocellulose is of great interest in material science nowadays mainly because of its hydrophilic, renewable, biodegradable, and biocompatible nature, as well as its excellent mechanical strength and tailorable surface ready for modification. Currently, nanocellulose is attracting attention to overcome the current challenges of dynamic hydrogels: robustness, autonomous self-healing, and self-recovery (SELF) properties simultaneously occurring in one system. In this regard, this review aims to explore current advances in design and fabrication of dynamic nanocellulose hydrogels and elucidate how incorporating nanocellulose with dynamic motifs simultaneously improves both SELF and robustness of hydrogels. Finally, current challenges and prospects of dynamic nanocellulose hydrogels are discussed.

Perspective on Constructing Cellulose-Hydrogel-Based Gut-Like Bioreactors for Growth and Delivery of Multiple-Strain Probiotic Bacteria

The current perspective presents an outlook on developing gut-like bioreactors with immobilized probiotic bacteria using cellulose hydrogels. The innovative concept of using hydrogels to simulate the human gut environment by generating and maintaining pH and oxygen gradients in the gut-like bioreactors is discussed. Fundamentally, this approach presents novel methods of production as well as delivery of multiple strains of probiotics using bioreactors. The relevant existing synthesis methods of cellulose hydrogels are discussed for producing porous hydrogels. Harvesting methods of multiple strains are discussed in the context of encapsulation of probiotic bacteria immobilized on cellulose hydrogels. Furthermore, we also discuss recent advances in using cellulose hydrogels for encapsulation of probiotic bacteria. This perspective also highlights the mechanism of probiotic protection by cellulose hydrogels. Such novel gut-like hydrogel bioreactors will have the potential to simulate the human gut ecosystem in the laboratory and stimulate new research on gut microbiota.

Effect of the counter-ion on nanocellulose hydrogels and their superabsorbent structure and properties

HYPOTHESIS

Carboxylated nanocellulose gels and superabsorbents (SAPs) can be engineered by ion exchange of TEMPO treated cellulose fibers with different cations prior to shearing, thus creating a nanofibrous network ionically cross-linked. The structure and properties of these materials are highly influenced by the type counter-ion used as it controls both the degree of fibrillation and crosslinking.

EXPERIMENTS

Functionalised nanocellulose SAPs were made using TEMPO-mediated oxidation followed by ion-exchange before fibrillation into a hydrogel and freeze-drying. Seven different cations were tested: 4 of valency 1 (H, Na, K, NH₄), and 3 of valency 2 (Ca, Mg, and Zn). The effect of the counter-ion on the gelation mechanism and the superabsorbent performance was evaluated. The SAP absorption capacity in deionised water was related to the superabsorbent structure and morphology.

FINDINGS

The gel stability of nanocellulose superabsorbents is governed by the counter-ion type and valency. The viscoelastic properties of all nanocellulose hydrogels are controlled by its elastic regime, that is storage modulus (G') > loss modulus (G″). The type of cation dictates the rheology of these gels by altering the fibrillation efficiency due to the extent of ionic cross-links occurring before and after fibrillation. The driving force for gelation in monovalent gels is due to the coupling of nanofibrils by physical interactions, creating an electrostatic stabilisation of the ionised COO^- groups at high shear forces. Cation - carboxylate interactions dominate the gelation in divalent gels by supressing the repulsive charges generated by the COO^- and also creating interfibril connections via ionic-crosslinks, as confirmed by the zeta potentials. The superabsorption performance is dominated by the counter-ion and is in the order of: NH₄⁺ > K⁺ > Na⁺ > Mg²⁺ > Zn²⁺ > Ca²⁺. NH₄⁺-SAPs present the slowest kinetics and the highest absorption capacity. Its high pore area, which extends the number of accessible carboxyl groups that participates in hydrogen bonding with water, is responsible for this behaviour. Nanocellulose SAPs are attractive renewable materials, suited for many applications, including as nutrient cation carriers in agriculture.

Engineered nanocellulose-based hydrogels for smart drug delivery applications

Nanocellulose is a promising "green" nanomaterial that has recently gained scientific interest because of its excellent characteristics, such as less risks of toxicity, biocompatibility, biodegradability, recyclability, and tunable surface features. Initially, three nanocellulose types (i.e., bacterial nanocellulose, nanocrystals, and nanofibers) and their potential biotechnological production routes have been discussed in detail. Contemporary studies are discussed in the development of nanocellulose aerogels, responsive hydrogels, injectable hydrogels/implants, and magnetic nanocellulose. Moreover, the development of hydrogels and potential crosslinking agents for the induction of desired properties has been described. Studies have revealed that the release kinetics of nanocellulosic gels/hydrogels varies from few minutes to several days depending on the given physicochemical conditions. However, such systems provide sustained drug release properties, so they are considered "smart" systems. Recent studies on controlled drug delivery systems have demonstrated their considerable potential for the next-generation transport of therapeutic drugs to target sites via various administration routes. This review presents the selection of appropriate sources and processing methodologies for the development of target nanocellulose types. It explains the potential challenges and opportunities and recommends future research directions about the smart delivery of therapeutic drugs.

One-step electrochemically induced counterion exchange to construct free-standing carboxylated cellulose nanofiber/metal composite hydrogels

The fabrication of polymeric composite hydrogel with hierarchical structure in a simple, controllable, and straightforward process poses great importance for manufacturing nanomaterials and subsequent applications. Herein, we report a one-step and template-free counterion exchange method to construct free-standing carboxylated cellulose nanofiber composite hydrogels. Metal ions were electrochemically and locally released from the electrode and chelated with carboxylated cellulose nanofibers, leading to the in-situ formation of composite hydrogels. The properties of composite hydrogels can be easily programmed by the type of electrode, current density, and electrodeposited suspension. Significantly, the composited hydrogels exhibited interconnected nanoporous structure, enhanced thermal degradation, improved mechanical strength and antibacterial activity. The results suggest great potential of anodic electrodeposition to fabricate nanofiber/metal composite hydrogels.

Surface-Modified Nanocellulose for Application in Biomedical Engineering and Nanomedicine: A Review

Presently, a plenty of concerns related to the environment are due to the overuse of petroleum-based chemicals and products; the synthesis of functional materials, starting from the natural sources, is the current trend in research. The interest for nanocellulose has recently increased in a huge range of fields, from the material science to the biomedical engineering. Nanocellulose gained this leading role because of several reasons: its natural abundance on this planet, the excellent mechanical and optical features, the good biocompatibility and the attractive capability of undergoing surface chemical modifications. Nanocellulose surface tuning techniques are adopted by the high reactivity of the hydroxyl groups available; the chemical modifications are mainly performed to introduce either charged or hydrophobic moieties that include amination, esterification, oxidation, silylation, carboxymethylation, epoxidation, sulfonation, thiol- and azido-functional capability. Despite the several already published papers regarding nanocellulose, the aim of this review involves discussing the surface chemical functional capability of nanocellulose and the subsequent applications in the main areas of nanocellulose research, such as drug delivery, biosensing/bioimaging, tissue regeneration and bioprinting, according to these modifications. The final goal of this review is to provide a novel and unusual overview on this topic that is continuously under expansion for its intrinsic sophisticated properties.

Rational design and latest advances of polysaccharide-based hydrogels for wound healing

Acute and chronic wounds cause severe physical trauma to patients and also bring an immense socio-economic burden. Hydrogels are considered to be effective wound dressings. Polysaccharides possessing distinctive properties such as biocompatibility, biodegradability, and nontoxicity are promising candidates to structure hydrogels for wound healing. Polysaccharide-based hydrogels can provide suitable moisture for the wound and act as a shield against bacteria. Adequate mechanical properties, degradability, and therapeutic agent controlled release of polysaccharide-based hydrogels have been already characterized for effective utilization. This review presented several crucial design considerations about hydrogels for wound healing, and the current state of polysaccharide (chitosan, alginate, hyaluronic acid, cellulose, dextran, and starch)-based hydrogels as wound dressings was also summarized. The commonly used crosslinking techniques, including physical, chemical, and enzymatic crosslinking, are discussed in detail. Finally, we outline the challenges and perspectives about the improvement of polysaccharide-based hydrogels.

Functionalized cellulose nanofibril aerogels as cooperative acid-base organocatalysts for liquid flow reactions

Cellulose nanomaterial aerogels are macroscopic porous solids with relatively high surface areas and are thus an interesting basis for renewable catalyst materials. Cross-linked acid-base bifunctional catalyst aerogels are produced here from TEMPO-oxidized cellulose nanofibrils (TOCNF) and demonstrated in both batch and flow catalysis. Recently established acid-base modification for catalysis is expanded upon for chemical or physical cross-linking with small molecules and polymers. Low density and relatively high surface area (up to 74 m² g^-1) aerogel catalysts are produced with a variety of processing approaches and then freeze-dried from water or tert-butyl alcohol/water mixtures. Finer pore structure and increased surface area are achieved with tert-butyl alcohol as co-solvent. Chemical cross-linking improved aerogel stability to solvents. Homogeneous and aerogel TOCNF catalysts are shown to be effective acid-base cooperative catalysts for aldol condensation reactions in batch reactions. Continuous flow reactions are performed with glass column reactors packed with aerogel catalysts that showed improved rates relative to batch experiments, while also demonstrating physical stability. Catalyst deactivation in flow reactions is observed and observations of deactivation support previously reported mechanisms of site poisoning by competitive chemisorption of reactants in analogous acid-base catalysts. This report is a key demonstration of cellulose nanofibril aerogels for catalysis in continuous liquid flow reactions.

Nanochitin/metal ion dual reinforcement in synthetic polyacrylamide network-based nanocomposite hydrogels

Nanocomposite hydrogels consisting of a synthetic matrix reinforced by nanosized crystalline polysaccharides offer significant potential in various fields. Different from nanocellulose, the combination of nanochitin with synthetic polymers to obtain nanocomposite hydrogels has not been extensively and systematically studied. Herein, a physically and chemically dual crosslinked nanocomposite hydrogel was successfully synthesized, where chitin nanowhiskers (ChNWs) and Zn²⁺ were incorporated within polyacrylamide (PAAm) matrix. Nanochitin/metal ion dual reinforcement imparts increased elasticity, enhanced mechanical properties, and improved recovery performance to PAAm network. The PAAm/ChNWs/Zn²⁺ hydrogel could be stretched to over 13 times its original length with tensile strength of 321.9 ± 8.2 kPa, and restore its original shape rapidly even when compressed at a strain of 95% with a corresponding compressive strength of 6.95 ± 0.20 MPa. The multiple crosslinks and interactions among ChNWs, Zn²⁺ and synthetic polymeric network were investigated. Moreover, the hydrogel was applied in drug release and soft bioelectronics.

A review on recent advances in polymer and peptide hydrogels

In this review, we focus on the very recent developments on the use of the stimuli responsive properties of polymer hydrogels for targeted drug delivery, tissue engineering, and biosensing utilizing their different optoelectronic properties. Besides, the stimuli-responsive hydrogels, the conducting polymer hydrogels are discussed, with specific attention to the energy generation and storage behavior of the xerogel derived from the hydrogel. The electronic and ionic conducting gels have been discussed that have applications in various electronic devices, e.g., organic field effect transistors, soft robotics, ionic skins, and sensors. The properties of polymer hybrid gels containing carbon nanomaterials have been exemplified here giving attention to applications in supercapacitors, dye sensitized solar cells, photocurrent switching, etc. Recent trends in the properties and applications of some natural polymer gels to produce thermal and acoustic insulating materials, drug delivery vehicles, self-healing material, tissue engineering, etc., are discussed. Besides the polymer gels, peptide gels of different dipeptides, tripeptides, oligopeptides, polypeptides, cyclic peptides, etc., are discussed, giving attention mainly to biosensing, bioimaging, and drug delivery applications. The properties of peptide-based hybrid hydrogels with polymers, nanoparticles, nucleotides, fullerene, etc., are discussed, giving specific attention to drug delivery, cell culture, bio-sensing, and bioimaging properties. Thus, the present review delineates, in short, the preparation, properties, and applications of different polymer and peptide hydrogels prepared in the past few years.

Engineering hydrogels by soaking: from mechanical strengthening to environmental adaptation

The soaking strategy could not only strengthen hydrogels with superior mechanical properties but also provide the hydrogels with environmentally adapting properties.

Dynamic plant-derived polysaccharide-based hydrogels

Plant-derived polysaccharides are widely used to fabricate hydrogels because of their ease of gelation and functionalization, plus exceptional biological properties. As an example, nanocellulose is a suitable candidate to fabricate hydrogels for tissue engineering applications due to its enhanced mechanical and biological properties. However, hydrogels are prone to permanent failure whilst under load without the ability to reform their networks once damaged. Recently, considerable efforts are being made to fabricate dynamic hydrogels via installation of reversible crosslinks within their networks. In this paper, we review the developments in the design of dynamic hydrogels from plant-derived polysaccharides, and discuss their applications in tissue engineering, sensors, bioelectronics devices, etc. The main goal of the paper is to elucidate how the network design of hydrogels can influence their dynamic properties: self-healing and self-recovery. Complementary to this, current challenges and prospects of dynamic plant-derived hydrogels are discussed.

Strain Rate-Dependent Viscoelasticity and Fracture Mechanics of Cellulose Nanofibril Composite Hydrogels

In this work, the composite hydrogel toughening behaviors as manifested by strain rate-dependent viscoelastic properties and enhanced fracture mechanics, that is, suppressed catastrophic crack propagation with increased resistance, are systematically examined by using cellulose nanofibrils (CNFs) as fillers in the polyacrylamide (PAAm) matrix. The uniaxial deformation tests show that the tearing energy increases with crack velocity and becomes dominated by the viscoelastic energy dissipation in front of the crack tip. The creep dynamics of the composite hydrogels under a constant stress is examined, and the results indicate that the incorporation of the CNF pronouncedly suppresses the creep deformation. In addition, the microdeformation and failure mechanisms are analyzed through the observation of morphology of arrested crack tips and the damage zone by transmission electron microscopy and scanning electron microscopy. By aligning the CNF along the crack direction, it is possible to focus on the study of interfacial slip mechanics and identify the role of interfacial slip during the energy dissipation process. The results indicate that the CNFs are largely orientated parallel to the loading direction to maximize the energy dissipation, where the initiation of crack propagation is the primary fracture mechanism in composite hydrogels. The coarse feature on the composite fracture surface implies that the CNF initiates deflection of crack propagation fronts and thus increases the strain energy for continuation of the fracture. It is envisioned that with the incorporation of interdisciplinary strategies, one can rationally combine multiple approaches toward the creation of nanocomposite hydrogels with enhanced mechanical properties.

One-Step Synthesis of Healable Weak-Polyelectrolyte-Based Hydrogels with High Mechanical Strength, Toughness, and Excellent Self-Recovery

Excellent self-recovery is critically important for soft materials such as hydrogels and shape memory polymers. In this work, weak-polyelectrolyte-based hydrogels with high mechanical strength, toughness, healability, and excellent self-recovery are fabricated by one-step polymerization of acrylic acid and poly(ethylene glycol) methacrylate in the presence of oppositely charged branched polyethylenimine. The synergy of electrostatic and hydrogen-bonding interactions and the in situ formed polyelectrolyte complex nanoparticles endow the hydrogels with a tensile strength of ∼4.7 MPa, strain at break of ∼1200%, and toughness of ∼32.6 MJ m^-3. The hydrogels can recover from an ∼300% strain to their initial state within 10 min at room temperature without any external assistance. Moreover, the hydrogels can heal from physical cut at room temperature and exhibit a prominent shape-memory performance with rapid shape recovery speed and high shape-fixing and shape-recovery ratios.

Improving salt tolerance and thermal stability of cellulose nanofibrils by grafting modification

Poor colloid stability of cellulose nanofibril (CNF) hydrogels at high temperature and high salinity can severely limit their industrial applications. This paper aims to prepare cellulose nanofibril hydrogels with improved salt tolerance and thermal stability. This was attained by simultaneous grafting of N,N-Dimethylacrylamide (DMA) and Butyl Acrylate (BA) onto the CNF surface based on the ceric ammonium nitrate-induced radical polymerization. The modified and original CNF samples were characterized by FT-IR, FBRM and rheological measurements. The FBRM results showed that the maximum salinity (NaCl) the CNF hydrogels can withstand increased from 1 wt% to 8 wt% after the simultaneous grafting of DMA (2 g/L) and BA (3 g/L). Moreover, rheological analysis results showed that the modified CNF hydrogels exhibited a much improved long-term thermal stability and a "salt-thickening" effect. As nano-cellulose based materials, the modified CNF hydrogels may have great potential as a promising petrochemical alternative for enhanced oil recovery applications.

Engineering nanocellulose hydrogels for biomedical applications

Nanocellulose hydrogels are highly hydrated porous cellulosic soft materials with good mechanical properties. These cellulose-based gels can be produced from bacterial or plant cellulose nanofibrils, which are hydrophilic, renewable, biodegradable and biocompatible. Nanocellulose, whether fibrils (CNF), crystals (CNC) or bacterial (BNC), has a high aspect ratio and surface area, and can be chemically modified with functional groups or by grafting biomolecules. Cellulose functionalization provides enhanced physical and chemical properties and control of biological interactions, tailoring its hydrogels for specific applications. Here, we critically review nanocellulose hydrogels for biomedical applications. Nanocellulose hydrogels have been demonstrated for 3D cell culture, mimicking the extracellular matrix (ECM) properties with low cytotoxicity. For wound dressing and cartilage repair, nanocellulose gels promote cell regeneration while providing the required mechanical properties for tissue engineering scaffolds. The encapsulation of therapeutics within nanocellulose allows the targeted delivery of drugs. Currently, cellulose crosslinking to peptides and proteins enables a new generation of low cost and renewable smart materials used in diagnostics. Last, the organized mesh of fibres contained in hydrogels drives applications in separation of biomolecules and cells. Nanocellulose hydrogels have emerged as a highly engineerable platform for multiple biomedical applications, providing renewable and performant solutions to life sciences.

A Dual Cross-Linked Strategy to Construct Moldable Hydrogels with High Stretchability, Good Self-Recovery, and Self-Healing Capability

Most conventional synthetic hydrogels suffer from poor mechanical properties; despite recent significant progress in fabricating tough hydrogels, it is still a challenge to simultaneously realize high stretchability, self-recovery, and self-healing capability in a hydrogel. In this work, a new type of starch/PVA/borax hybrid dual cross-linked (DC) hydrogel was synthesized by a one-pot method. The as-prepared DC hydrogels exhibited mechanical properties of remarkable extensibility (ca. 2485%), excellent toughness (ca. 290.5 kJ m^-3), high compression strength (ca. 547.8 kPa), rapid recoverability (81.9% energy recovery after 30 min), and free-shapeable behavior. More impressively, the DC gels sustained approximately 300 times their own weight and exhibited an outstanding self-healing capability at room temperature both in air and underwater. Furthermore, the adsorption amount of methylene blue onto the anionic DC gel (144.68 mg/g) was much higher than that of corn starch gel. Consequently, the eco-friendly, stable, and biodegradable hydrogels will have a great potential application in removing anionic dyes from the wastewater produced by agriculture and industry.