Toward a New Era of SERS and TERS at the Nanometer Scale: From Fundamentals to Innovative Applications

Advances in analysis of atmospheric ultrafine particles and application in air quality, climate, and health research

There is growing interest in the contribution of ultrafine particles to air quality, climate, and human health. Ultrafine particles are of central significance for the influence of radiative forcing of climate change by involving in the formation of clouds and precipitation. Moreover, exposure to ultrafine particles can enhance the disease burden. The determination of those effects of ultrafine particles strongly depends on their chemical composition and physicochemical properties. This review focuses on the advanced techniques for the characterization of chemical composition and physicochemical properties of ultrafine particles in the past five years. The current analytical methodologies are broadly classified into electron and X-ray microscopy, optical spectroscopy and microscopy, electrical mobility, and mass spectrometry, and then described and discussed its operation principle, advantages, and limitations. Besides measurements, application of the state-of-the-art techniques is briefly reviewed to help us to promote a better understanding of atmospheric ultrafine particles relevant to air quality, climate, and health.

Single-molecule detection of SARS-CoV-2 N protein on multilayered plasmonic nanotraps with surface-enhanced Raman spectroscopy

The spread of the SARS-CoV-2 virus has had an unprecedented impact, both by posing a serious risk to human health and by amplifying the burden on the global economy. The rapid identification of the SARS-CoV-2 virus has been crucial to preventing and controlling the spread of SARS-CoV-2 infections. In this study, we propose a multilayered plasmonic nanotrap (MPNT) device for the rapid identification of single particles of SARS-CoV-2 virus in ultra-high sensitivity by surface-enhanced Raman scattering (SERS). The MPNT device is composed of arrays of concentric cylindrical cavities with Ag/SiO2/Ag multilayers deposited on the top and at the bottom. By varying the diameter of the cylinders and the thickness of the multilayers, the resonant optical absorption and local electric field were optimized. The SERS enhancement factors of the proposed device are of the order of 108, which enable the rapid identification of SARS-CoV-2 N protein in concentrations as low as 1.25 × 10-15－12.5 × 10-15 g mL-1 within 1 min. The developed MPNT SERS device provides a label-free and rapid detection platform for SARS-CoV-2 virus. The general nature of the device makes it equally suitable to detect other infectious viruses.

A SERS-based point-of-care testing approach for efficient determination of diquat and paraquat residues using a flexible silver flower-coated melamine sponge

Diquat (DQ) and paraquat (PQ) residues in food are potential hazards to consumers' health. Point-of-care testing (POCT) of them remains challenging. Based on surface-enhanced Raman spectroscopy (SERS) technology, we developed a POCT strategy for DQ and PQ on apple surface and in apple juice. A point-of-use composite was fabricated using a piece of porous melamine sponge (MS) modified with silver nanoflowers (AgNFs), combining the specificity of the SERS fingerprint and the excellent adsorption capacity of MS. Using this dual-functional AgNFs@MS, the on-site determination of the DQ and PQ residues was completed within 3 min without pretreatment. Clear trends were observed between SERS intensity and logarithmic concentrations, with r values from 0.962 to 0.984. The limit of detection of DQ and PQ were 0.14-0.70 ppb in apple juice and on apple surface. This study provides a new point-of-use alternative for rapidly detecting DQ and PQ residues in nonlaboratory settings.

Localized surface plasmon resonance (LSPR) excitation on single silver nanoring with nanoscale surface roughness

With the expansion of the application of high-sensitivity Surface-enhanced Raman scattering (SERS) technique, micro SERS-active substrates with rich optical properties and high-level functions are desired. In this study, silver nanorings with nanoscale surface roughness were fabricated as a new type of enclosed quasi-2D micro-SERS-active substrate. Highly-crystalline spherical and hemispherical silver nanoprotrusions were densely and uniformly distributed over the entire surface of the nanorings. The SERS signals were significantly enhanced on the roughened silver nanorings which were mainly derived from the maximal localized surface plasmon resonance (LSPR) points at the junctions between adjacent coupled nanoprotrusions on the roughened nanorings. The mapping image shows a uniform and intense LSPR enhancement over the nanorings, owing to the uniform and dense distribution of silver nanoprotrusions and the resulting uniform distribution of maximal LSPR points on the roughened nanorings. The dark-field spectra further indicated that the single roughened silver nanoring had significant LSPR enhancement, a wide LSPR frequency-range response, and adaptability for SERS enhancement. Notably, both the measured and simulated results demonstrate that the maximal LSPR enhancement at the junctions between the nanoprotrusions, which are distributed on the inner surface of the silver nanoring, is higher than that on the outer surface because of the plasmon-focusing effect of the enclosed silver nanoring, which leads to the lateral asymmetrical distribution of LSPR intensity, indicating more LSPR and SERS features. These results indicate that single roughened silver nanorings exhibit excellent performance as a new type of enclosed quasi-2D silver nanoring micro-SERS-active substrate, microzone LSPR catalysis, and micro/nanodevices.

DNA origami-templated gold nanorod dimer nanoantennas: enabling addressable optical hotspots for single cancer biomarker SERS detection

The convergence of DNA origami and surface-enhanced Raman spectroscopy (SERS) has opened a new avenue in bioanalytical sciences, particularly in the detection of single-molecule proteins. This breakthrough has enabled the development of advanced sensor technologies for diagnostics. DNA origami offers a highly controllable framework for the precise positioning of nanostructures, resulting in superior SERS signal amplification. In our investigation, we have successfully designed and synthesized DNA origami-based gold nanorod monomer and dimer assemblies. Moreover, we have evaluated the potential of dimer assemblies for label-free detection of a single biomolecule, namely epidermal growth factor receptor (EGFR), a crucial biomarker in cancer research. Our findings have revealed that the significant Raman amplification generated by DNA origami-assembled gold nanorod dimer nanoantennas facilitates the label-free identification of Raman peaks of single proteins, which is a prime aim in biomedical diagnostics. The present work represents a significant advancement in leveraging plasmonic nanoantennas to realize single protein SERS for the detection of various cancer biomarkers with single-molecule sensitivity.

Controlled Spread of a Ag Layer from the Core to the Tip along the Branches of AuAg Nanostars for Improved SERS Detection of Okadaic Acid in Shellfish

Plasmonic Au-Ag nanostars are excellent surface-enhanced Raman scattering (SERS) probes due to bimetallic coupling and the tip effect. However, the existing preparation methods of AuAg nanostars cannot achieve controlled growth of the Ag layer on the branches of nanostars and so cannot display their SERS to the maximum extent, thus limiting its sensitivity in biosensing. Herein, a novel strategy "PEI (polyethylenimine)-guided Ag deposition method" is proposed for synthesizing AuAg core-shell nanostars (AuAg@Ag NS) with a tunable distribution of the Ag layer from the core to the tip, which offers an avenue for investigating the correlation between SERS efficiency and the extent of spread of the Ag layer. It is found that AuAg@Ag NS with a Ag layer coated the whole branch has the strongest SERS performance because the coupling between the tips and Ag layer is maximized. Meanwhile, as a completely closed core-shell structure, AuAg@Ag NS can confine and anchor 4-ATP inside the Ag layer to avoid an unstable SERS signal. By connecting the aptamer, a reliable internal standard nanoprobe with a SERS enhancement factor (EF) up to 1.86 × 108 is prepared. Okada acid is detected through competitive adsorption of this SERS probes, and the detection limit is 36.6 pM. The results gain fundamental insights into tailoring the nanoparticle morphologies and preparation of internal standard nanoprobes and also provide a promising avenue for marine toxin detection in food safety.

Single-molecule tip-enhanced Raman spectroscopy of C60 on the Si(111)-(7 × 7) surface

Tip-enhanced Raman spectroscopy (TERS), combined with low-temperature scanning tunnelling microscopy (STM), has emerged as a highly sensitive method for chemical characterization, offering even sub-molecular resolution. However, its exceptional sensitivity is generally limited to molecules adsorbed onto plasmonic surfaces. Here we demonstrate single-molecule TERS for fullerene (C60) adsorbed on the Si(111)-(7 × 7) reconstructed surface. Distinct adsorption geometries of C60 are manifested in the TERS spectra. In addition, we reveal that formation of a molecular-point-contact (MPC) drastically enhances Raman scattering and leads to the emergence of additional vibrational peaks, including overtones and combinations. In the MPC regime, the anti-Stokes peaks are observed, revealing that vibrationally excited states are populated through optical excitation of the MPC junction, whereas showing no significant vibrational heating by current flow via inelastic electron-vibration scattering. Our results will open up the possibility of applying TERS for semiconducting surfaces and studying microscopic mechanisms of vibrational heating in metal-molecule-semiconductor nanojunctions.

Selective excitation of vibrations in a single molecule

The capability to excite, probe, and manipulate vibrational modes is essential for understanding and controlling chemical reactions at the molecular level. Recent advancements in tip-enhanced Raman spectroscopies have enabled the probing of vibrational fingerprints in a single molecule with Ångström-scale spatial resolution. However, achieving controllable excitation of specific vibrational modes in individual molecules remains challenging. Here, we demonstrate the selective excitation and probing of vibrational modes in single deprotonated phthalocyanine molecules utilizing resonance Raman spectroscopy in a scanning tunneling microscope. Selective excitation is achieved by finely tuning the excitation wavelength of the laser to be resonant with the vibronic transitions between the molecular ground electronic state and the vibrational levels in the excited electronic state, resulting in the state-selective enhancement of the resonance Raman signal. Our approach contributes to setting the stage for steering chemical transformations in molecules on surfaces by selective excitation of molecular vibrations.

Highly sensitive SERS nanoplatform based on aptamer and vancomycin for detection of S. aureus and its clinical application

Staphylococcus aureus (S. aureus) is the most common pathogen in human purulent infections, which can cause local purulent infections, as well as pneumonia, pseudomembranous enteritis, pericarditis, and even systemic infections. The conventional methods including bacteria colony counting, polymerase chain reaction and enzyme-linked immunosorbent assay can't fully meet the requirement of highly sensitive detection of S. aureus due to their own disadvantages. Therefore, it's an urgent need to develop new platform to detect S. aureus in the early infection stage. In this study, a new surface-enhanced Raman scattering (SERS)-based nanoplatform based on dual-recognition of aptamer (Apt) and vancomycin (Van) was developed for the highly sensitive detection of S. aureus. The SERS nanoplatform consisted of two functional parts: aptamer-conjugated Fe3O4 magnetic nanoparticles (Fe3O4-Apt MNPs) for bacteria enrichment and vancomycin modified-Au nanoparticles (Van-Au NPs) as the SERS probes for S. aureus quantitative detection. Upon the target bacteria enrichment, the SERS signals of the supernatant after magnetic separation could be obtained and analyzed under different concentrations of S. aureus. The limit of detection of the proposed assay was found to be 3.27 CFU/mL. We believe that the proposed SERS-based nanoplatform has great potential as a powerful tool in the early detection of specific bacteria.

Microplastics and nanoplastics released from injection syringe, solid and liquid dimethylpolysiloxane (PDMS)

For a plastic syringe, a stopper at the end of plunger is usually made of polydimethylsiloxane (PDMS, and co-ingredients). To reduce friction and prevent leakage between the stopper and barrel, short chain polymer of liquid PDMS is also used as lubricant. Consequently, an injection process can release solid PDMS debris from the stopper and barrel, and liquid PDMS droplets from the lubricant, both of which are confirmed herein as solid and liquid micro(nano)plastics. From molecular spectrum perspective to directly visualise those micro(nano)plastics, Raman imaging was employed to analyse hundreds-to-thousands of spectra (hyper spectrum or hyperspectral matrix) and significantly enhance signal-to-noise ratio. From morphology perspective to provide high resolution of image, scanning electron microscopy (SEM) was engaged to cross-check with Raman images and increase assignment / quantification certainty. The weak Raman imaging signal of nanoplastics was extracted using image deconvolution algorithm to remove the background noise and average the signal variation. To increase the result's representativeness and avoid quantification bias, multiple syringes were tested and multiple areas were randomly scanned toward statistical results. It was estimated that thousands of microplastics and millions of nanoplastics of solid/liquid PDMS might be injected when using a plastic syringe of 1 mL. Overall, Raman imaging (along with algorithm and SEM) can be helpful for further research on micro(nano)plastics, and it should be cautious to use plastic syringe due to the increasing concern on the emerging contamination of not only solid but also liquid micro(nano)plastics.

A green approach to nanoplastic detection: SERS with untreated filter paper for polystyrene nanoplastics

Plastic pollution at the nanoscale continues to pose adverse effects on environmental sustainability and human health. However, the detection of nanoplastics (NPLs) remains challenging due to limitations in methodology and instrumentation. Herein, a "green approach" for surface-enhanced Raman spectroscopy (SERS) was exploited to detect polystyrene nanospheres (PSNSs) in water, employing untreated filter paper and a simple syringe-filtration set-up. This SERS protocol not only enabled the filtration of nano-sized PSNSs, which are smaller than the pore size of the ordinary filter paper, but also offered SERS enhancement by utilizing quasi-spherical-shaped silver nanoparticles (AgNPs) as the SERS-active substrate. The filtering of NPLs was accomplished by adding an aggregating agent to the nanoparticle mixture, which caused the aggregation of NPLs and AgNPs, resulting in a larger cluster and more hot spots for SERS detection. The optimal aggregating agent and its concentration, as well as the volume ratio between the AgNPs and NPLs, were also optimized. This SERS method successfully detected and quantified PSNSs of various sizes (i.e., 100, 300, 460, 600, and 800 nm) down to a limit of detection (LOD) of about 0.31 μg mL-1. The method was also validated against the presence of several interferents (i.e., salts, sugars, amino acids, and surfactants) and was proven practical, as evidenced by the detection of 800nm PSNSs in drinking and tap water (LODs of 1.47 and 1.55 μg mL-1, respectively).

Surface-enhanced Raman scattering-based identification of breast cancer progression using extracellular vesicles-derived integrin α6β4

Detection of progression is of great importance to breast cancer treatment and can benefit patients. Limited by current detection technologies and biomarkers, early breast cancer progression diagnosis remains challenging. Researchers have found blood extracellular vesicles (EVs)-derived integrin α6β4 directly facilitate progression in breast cancer, enabling cancer detection. However, EVs size and heterogeneity hinder protein detection, masked by abundant background EVs. Hence, novel tools for efficient detection of EVs with high selectivity and low interference are significantly desired. Here, a new silver-coated gold nanorods SERS probe, termed as Au@Ag@IDA-B/4MSTP, based on DNA aptamer was established for the detection of integrin α6β4 derived from EVs. Validation of the Au@Ag@IDA-B/4MSTP probes using cell-culture-derived EVs revealed a LOD of 23 particles/μL for EVs detection. This tool was further confirmed to mimic the real state of cancer with subcutaneous tumor model and lung metastasis model in mice. With 10 μL of blood plasma and simple Raman analysis process, the test achieved 85.7 % sensitivity and 83.3 % specificity. Moreover, our method achieves a simplified approach that expedites the detection process. These results demonstrate the good detection performance of Au@Ag@IDA-B/4MSTP probes for EVs integrin α6β4, and suggest that this non-invasive approach could be a promising tool for early detection of breast cancer progression.

Toward Modeling the Complexity of the Chemical Mechanism in SERS

Surface-enhanced Raman scattering (SERS) provides detailed information about the binding of molecules at interfaces and their interactions with the local environment due to the large enhancement of Raman scattering. This enhancement arises from a combination of the electromagnetic mechanism (EM) and chemical mechanism (CM). While it is commonly accepted that EM gives rise to most of the enhancement, large spectral changes originate from CM. To elucidate the rich information contained in SERS spectra about molecules at interfaces, a comprehensive understanding of the enhancement mechanisms is necessary. In this Perspective, we discuss the current understanding of the enhancement mechanisms and highlight their interplay in complex local environments. We will also discuss emerging areas where the development of computational and theoretical models is needed with specific attention given to how the CM contributes to the spectral changes. Future efforts in modeling should focus on overcoming the challenges presented in this review in order to capture the complexity of CM in SERS.

High-Power Impulse Magnetron Sputter Deposition of Ag on Self-Assembled Au Nanoparticle Arrays at Low-Temperature Dewetting Conditions

Plasmons have facilitated diverse analytical applications due to the boosting signal detectability by hot spots. In practical applications, it is crucial to fabricate straightforward, large-scale, and reproducible plasmonic substrates. Dewetting treatment, via applying direct thermal annealing of metal films, has been used as a straightforward method in the fabrication of such plasmonic nanostructures. However, tailoring the evolution of the dewetting process of metal films poses considerable experimental complexities, mainly due to nanoscale structure formation. Here, we use grazing-incidence small- and wide-angle X-ray scattering for the in situ investigation of the high-power impulse magnetron sputter deposition of Ag on self-assembled Au nanoparticle arrays at low-temperature dewetting conditions. This approach allows us to examine both the direct formation of binary Au/Ag nanostructure and the consequential impact of the dewetting process on the spatial arrangement of the bimetallic nanoparticles. It is observed that the dewetting at 100 °C is sufficient to favor the establishment of a homogenized structural configuration of bimetallic nanostructures, which is beneficial for localized surface plasmon resonances (LSPRs). The fabricated metal nanostructures show potential application for the surface-enhanced Raman scattering (SERS) detection of rhodamine 6G molecules. As SERS platform, bimetallic nanostructures formed with dewetting conditions turn out to be superior to those without dewetting conditions. The method in this work is envisioned as a facile strategy for the fabrication of plasmonic nanostructures.

Advances in Label-Free Glucose Detection Using Self-Assembled Nanoparticles and Surface-Enhanced Raman Spectroscopy

In the landscape of biomolecular detection, surface-enhanced Raman spectroscopy (SERS) confronts notable obstacles, particularly in the label-free detection of biomolecules, with glucose and other sugars presenting a quintessential challenge. This study heralds the development of a pioneering SERS substrate, ingeniously engineered through the self-assembly of nanoparticles of diverse sizes (Ag1@Ag2NPs). This configuration strategically induces 'hot spots' within the interstices of nanoparticles, markedly amplifying the detection signal. Rigorous experimental investigations affirm the platform's rapidity, precision, and reproducibility, and the detection limit of this detection method is calculated to be 6.62 pM. Crucially, this methodology facilitates nondestructive glucose detection in simulated samples, including phosphate-buffered saline and urine. Integrating machine learning algorithms with simulated serum samples, the approach adeptly discriminates between hypoglycemic, normoglycemic, and hyperglycemic states. Moreover, the platform's versatility extends to the detection and differentiation of monosaccharides, disaccharides, and methylated glycosides, underscoring its universality and specificity. Comparative Raman spectroscopic analysis of various carbohydrate structures elucidates the unique SERS characteristics pertinent to these molecules. This research signifies a major advance in nonchemical, label-free glucose determination with enhanced sensitivity via SERS, laying a new foundation for its application in precision medicine and advancing structural analysis in the sugar domain.

Surface control in the adsorption of tebuthiuron on modified silver surfaces tracked by surface-enhanced Raman scattering spectroscopy

The vibrational assignment of the Raman and surface-enhanced Raman scattering (SERS) spectra of the herbicide tebuthiuron (TBH) was accomplished, which allowed unprecedented propositions for adsorption geometries on the surface of silver nanoparticles (AgNP). Ascribed SERS features allowed suggesting that the adsorption occurred through nitrogen atoms of thiadiazole group, since intense band shift assigned to ring mode was marking of the coordination with the metallic surface. AgNP were treated with different surface modifiers that leaded to substantial changes in TBH adsorption geometries. Spectral changes, as the enhancement of out-of-plane ring modes, were indicative of the presence of tilted thiadiazole geometries in relation to the silver surface. Density Functional Theory (DFT) calculations from TBH molecules, in isolation and in interaction with ten-atom cluster of silver leaded to obtain theoretical spectra that gave support to interpret experimental Raman and SERS spectra.

A stable and flexible Au@Ag NPs/PVA SERS platform for thiram residue detection on rough surface

Flexible and transparent surface-enhanced Raman scattering (SERS) substrates have gained great attention in analysis field as they offer a fast, non-destructive, and highly sensitive platform for in-situ detection. In this work, we present a facile one-pot strategy for synthesizing gold-cored silver shell nanoparticles (Au@Ag NPs) in the polyvinyl alcohol (PVA) colloid. With no other reducing agents, PVA can serve as both reducing and stabilizing agents for forming Au@Ag NPs. Besides, PVA acts as a scaffold to maintain SERS "hot-spots" by preventing nanoparticle aggregation. By using this flexible Au@Ag NPs/PVA colloid, the analytes can be extracted from rough surfaces for SERS measurements with excellent sensitivity, repeatability and stability. The SERS activity of the Au@Ag NPs/PVA remained at 89.8% even after 120 days of storage at room temperature in sealed air atmosphere. The selective detection of thiram residues on the surface of fruits and vegetables was successfully achieved. The limits of detection for thiram residues on apple and tomato surfaces were measured to be 0.58 and 0.56 ng cm-2, respectively, with recovery rate ranging from 91% to 107%. This work demonstrates the immense application potential of SERS colloid platform in the fields of food safety and environmental analysis.

Label-free and highly sensitive detection of aflatoxin B1 by Ag IANPs via surface-enhanced Raman spectroscopy

Aflatoxin B1 (AFB1), a pernicious constituent of the aflatoxin family, predominantly contaminates cereals, oils, and their derivatives. Acknowledged as a Class I carcinogen by the World Health Organization (WHO), the expeditious and quantitative discernment of AFB1 remains imperative. This investigation delineates that aluminum ions can precipitate the coalescence of iodine-modified silver nanoparticles, thereby engendering hot spots conducive for label-free AFB1 identification via Surface-Enhanced Raman Spectroscopy (SERS). This methodology manifests a remarkable limit of detection (LOD) at 0.47 fg/mL, surpassing the sensitivity thresholds of conventional survey techniques. Moreover, this method has good anti-interference ability, with a relative error of less than 10% and a relative standard deviation of less than 6% in quantitative results. Collectively, these findings illuminate the substantial application potential and viability of this approach in the quantitative analysis of AFB1, underpinning a significant advancement in food safety diagnostics.

Rapid Sample Pretreatment Facilitating SERS Detection of Trace Weak Organic Acids/Bases in Complex Matrices

Fast and efficient sample pretreatment is the prerequisite for realizing surface-enhanced Raman spectroscopy (SERS) detection of trace targets in complex matrices, which is still a big issue for the practical application of SERS. Recently, we have proposed a highly performed liquid-liquid extraction (LLE)-back extraction (BE) for weak acids/bases extraction in drinking water and beverage samples. However, the performance efficiency decreased drastically on facing matrices like food and biological blood. Based on the total interaction energies among target, interferent, and extractant molecules, solid-phase extraction (SPE) with a higher selectivity was introduced in advance of LLE-BE, which enabled the sensitive (μg L-1 level) and rapid (within 10 min) SERS detection of both koumine (a weak base) and celastrol (a weak acid) in different food and biological samples. Further, the high SERS sensitivity was determined unmanned by Vis-CAD (a machine learning algorithm), instead of the highly demanded expert recognition. The generality of SPE-LLE-BE for various weak acids/bases (2 < pKa < 12), accompanied by the high efficiency, easy operation, and low cost, offers SERS as a powerful on-site and efficient inspection tool in food safety and forensics.

Surface-Enhanced Raman Spectroscopy: Current Understanding, Challenges, and Opportunities

While surface-enhanced Raman spectroscopy (SERS) has experienced substantial advancements since its discovery in the 1970s, it is an opportunity to celebrate achievements, consider ongoing endeavors, and anticipate the future trajectory of SERS. In this perspective, we encapsulate the latest breakthroughs in comprehending the electromagnetic enhancement mechanisms of SERS, and revisit CT mechanisms of semiconductors. We then summarize the strategies to improve sensitivity, selectivity, and reliability. After addressing experimental advancements, we comprehensively survey the progress on spectrum-structure correlation of SERS showcasing their important role in promoting SERS development. Finally, we anticipate forthcoming directions and opportunities, especially in deepening our insights into chemical or biological processes and establishing a clear spectrum-structure correlation.

Constructing Ultra-Strong SERS Tags in the Cellular Raman-Silent Region by Orthogonal Array Testing Strategy

Surface-enhanced Raman spectroscopy (SERS) tags have the advantages of unique fingerprint vibration spectrum, ultranarrow spectral line widths, and weak photobleaching effect, showing great potential for bioimaging. However, SERS imaging is still hindered for further application due to its weak spontaneous Raman scattering, biomolecular signal interference, and long acquisition times. Here, we develop a novel SERS tag of the core (Au)-shell (N-doped graphene) structure (Au@NGs) with ultrastrong and stable Raman signal (2180 cm-1) in the cellular Raman-silent region (1800-2800 cm-1) through base-promoted oxidative decarboxylation of amino acids. Exploring the factors (metal salts, amino acids, catalysts, temperature, etc.) to obtain Au@NGs with the strongest Raman signal commonly requires more than 100,000 separate experiments, while that using an orthogonal array testing strategy is reduced to 56. The existence of deep charge transfer between the Au surface and C≡N-graphene is proved by theoretical calculations, which means the ultrastrong signal of Au@NGs is the joint effect of electromagnetic and chemical enhancement. The Au@NGs have a detection sensitivity down to a single-nanoparticle level, and high-speed and high-resolution cellular imaging (4453 pixels) is obtained within 10 s by global Raman imaging. The combination of Au@NGs-based tags with ultrastrong intrinsic Raman imaging capability and global imaging technology holds great promise for high-speed Raman imaging.

Single-Molecule Spectroscopy and Super-Resolution Mapping of Physicochemical Parameters in Living Cells

By superlocalizing the positions of millions of single molecules over many camera frames, a class of super-resolution fluorescence microscopy methods known as single-molecule localization microscopy (SMLM) has revolutionized how we understand subcellular structures over the past decade. In this review, we highlight emerging studies that transcend the outstanding structural (shape) information offered by SMLM to extract and map physicochemical parameters in living mammalian cells at single-molecule and super-resolution levels. By encoding/decoding high-dimensional information-such as emission and excitation spectra, motion, polarization, fluorescence lifetime, and beyond-for every molecule, and mass accumulating these measurements for millions of molecules, such multidimensional and multifunctional super-resolution approaches open new windows into intracellular architectures and dynamics, as well as their underlying biophysical rules, far beyond the diffraction limit.

Nanoscale Chemical Probing of Metal-Supported Ultrathin Ferrous Oxide via Tip-Enhanced Raman Spectroscopy and Scanning Tunneling Microscopy

Metal-supported ultrathin ferrous oxide (FeO) has attracted immense interest in academia and industry due to its widespread applications in heterogeneous catalysis. However, chemical insight into the local structural characteristics of FeO, despite its critical importance in elucidating structure-property relationships, remains elusive. In this work, we report the nanoscale chemical probing of gold (Au)-supported ultrathin FeO via ultrahigh-vacuum tip-enhanced Raman spectroscopy (UHV-TERS) and scanning tunneling microscopy (STM). For comparative analysis, single-crystal Au(111) and Au(100) substrates are used to tune the interfacial properties of FeO. Although STM images show distinctly different moiré superstructures on FeO nanoislands on Au(111) and Au(100), TERS demonstrates the same chemical nature of FeO by comparable vibrational features. In addition, combined TERS and STM measurements identify a unique wrinkled FeO structure on Au(100), which is correlated to the reassembly of the intrinsic Au(100) surface reconstruction due to FeO deposition. Beyond revealing the morphologies of ultrathin FeO on Au substrates, our study provides a thorough understanding of the local interfacial properties and interactions of FeO on Au, which could shed light on the rational design of metal-supported FeO catalysts. Furthermore, this work demonstrates the promising utility of combined TERS and STM in chemically probing the structural properties of metal-supported ultrathin oxides on the nanoscale.

Hydrogel-Coated SERS Microneedles for Drug Monitoring in Dermal Interstitial Fluid

In vivo drug monitoring is crucial for evaluating the effectiveness and safety of drug treatment. Blood sampling and analysis is the current gold standard but needs professional skills and cannot meet the requirements of point-of-care testing. Dermal interstitial fluid (ISF) showed great potential to replace blood for in vivo drug monitoring; however, the detection was challenging, and the drug distribution behavior in ISF was still unclear until now. In this study, we proposed surface-enhanced Raman spectroscopy (SERS) microneedles (MNs) for the painless and real-time analysis of drugs in ISF after intravenous injection. Using methylene blue (MB) and mitoxantrone (MTO) as model drugs, the innovative core-satellite structured Au@Ag SERS substrate, hydrogel coating over the MNs, rendered sensitive and quantitative drug detection in ISF of mice within 10 min. Based on this technique, the pharmacokinetics of the two drugs in ISF was investigated and compared with those in blood, where the drugs were analyzed via liquid chromatography-mass spectrometry. It was found that the MB concentration in ISF and blood was comparable, whereas the concentration of MTO in ISF was 2-3 orders of magnitude lower than in blood. This work proposed an efficient tool for ISF drug monitoring. More importantly, it experimentally proved that the penetration ratio of blood to ISF was drug-dependent, providing insightful information into the potential of ISF as a blood alternative for in vivo drug detection.

Core-Shell Gold Nanoparticles@Pd-Loaded Covalent Organic Framework for In Situ Surface-Enhanced Raman Spectroscopy Monitoring of Catalytic Reactions

A core-shell nanostructure of gold nanoparticles@covalent organic framework (COF) loaded with palladium nanoparticles (AuNPs@COF-PdNPs) was designed for the rapid monitoring of catalytic reactions with surface-enhanced Raman spectroscopy (SERS). The nanostructure was prepared by coating the COF layer on AuNPs and then in situ synthesizing PdNPs within the COF shell. With the respective SERS activity and catalytic performance of the AuNP core and COF-PdNPs shell, the nanostructure can be directly used in the SERS study of the catalytic reaction processes. It was shown that the confinement effect of COF resulted in the high dispersity of PdNPs and outstanding catalytic activity of AuNPs@COF-PdNPs, thus improving the reaction rate constant of the AuNPs@COF-PdNPs-catalyzed hydrogenation reduction by 10 times higher than that obtained with Au/Pd NPs. In addition, the COF layer can serve as a protective shell to make AuNPs@COF-PdNPs possess excellent reusability. Moreover, the loading of PdNPs within the COF layer was found to be in favor of avoiding intermediate products to achieve a high total conversion rate. AuNPs@COF-PdNPs also showed great catalytic activities toward the Suzuki-Miyaura coupling reaction. Taken together, the proposed core-shell nanostructure has great potential in monitoring and exploring catalytic processes and interfacial reactions.

Macroscopic Superlattice Membranes Self-Assembled from Gold Nanobipyramids with Precisely Tunable Tip Arrangements for SERS

A persistent challenge in utilizing Au nanocrystals for surface-enhanced Raman spectroscopy (SERS) lies in achieving controllable superstructures that maximize SERS performance. Here, a novel strategy is proposed to enhance the SERS performance by precisely adjusting the tip arrangements of Au nanobipyramids (BPs) in two-dimensional (2D) superlattices (SLs). This is achieved through ligand-exchange of Au BPs, followed by liquid-air interfacial assembly, resulting in large-area, transferrable SL membranes. The key to controlling the arrangement of Au BPs in the SLs is the regulation of the amount of free ligands added during self-assembly, which allows for the precise formation of various configurations such as tilted SLs, tip-on-tip SLs, and tip-to-tip SLs. Among these configurations, tip-on-tip SLs exhibit the highest enhancement factor for SERS, reaching an impressive value of 1.95×108, with uniform and consistent SERS signals across a large area. The experimental findings are further corroborated by simulations using the finite element method. This study establishes an efficient method for engineering the microstructure of 2D SLs composed of Au BPs, highlighting the importance of fine-tuning the tip arrangements of Au BPs to regulate SERS performance.

SERS in 3D cell models: a powerful tool in cancer research

Unraveling the cellular and molecular mechanisms underlying tumoral processes is fundamental for the diagnosis and treatment of cancer. In this regard, three-dimensional (3D) cancer cell models more realistically mimic tumors compared to conventional 2D cell cultures and are more attractive for performing such studies. Nonetheless, the analysis of such architectures is challenging because most available techniques are destructive, resulting in the loss of biochemical information. On the contrary, surface-enhanced Raman spectroscopy (SERS) is a non-invasive analytical tool that can record the structural fingerprint of molecules present in complex biological environments. The implementation of SERS in 3D cancer models can be leveraged to track therapeutics, the production of cancer-related metabolites, different signaling and communication pathways, and to image the different cellular components and structural features. In this review, we highlight recent progress in the use of SERS for the evaluation of cancer diagnosis and therapy in 3D tumoral models. We outline strategies for the delivery and design of SERS tags and shed light on the possibilities this technique offers for studying different cellular processes, through either biosensing or bioimaging modalities. Finally, we address current challenges and future directions, such as overcoming the limitations of SERS and the need for the development of user-friendly and robust data analysis methods. Continued development of SERS 3D bioimaging and biosensing systems, techniques, and analytical strategies, can provide significant contributions for early disease detection, novel cancer therapies, and the realization of patient-tailored medicine.

An in-situ method for SERS substrate preparation and optimization based on galvanic replacement reaction

BACKGROUND

Various surface-enhanced Raman spectroscopy (SERS) substrate preparation methods have been reported, however, how to tune the "gap" between nanostructures to make more "hot spots" is still a barrier that restricts their application. The gap between nanostructures is usually fixed when the substrates are prepared. In other words, it is hard to tune interparticle distances for maximum electromagnetic coupling during substrate preparation process. Therefore, an in-situ substrate optimization method that could monitor the SERS signal intensity changes, i.e., to find the optimum gap width and particle size, during substrate preparation process is needed.

RESULTS

A method based on the galvanic replacement reaction (GRR) is proposed for the in-situ gap width tuning between nanostructures as well as for the optimization of SERS substrates. Noble metal nanoparticles (NPs) form and grow on the sacrificial templates' surface while noble metal ions are reduced by sacrificial metal (oxides) in GRR. Along with the fresh and clean NPs' surface generated, the gap between two noble metal NPs decreases with the growth of the NPs. To demonstrate this strategy, cuprous oxide/Ti (Cu2O/Ti) sacrificial templates were prepared, and then a GRR was carried out with HAuCl4. The real-time SERS detection during GRR show that the optimum reaction time (ORT) is 300 ± 30 s. Furthermore, SERS performance testing was conducted on the optimized substrate, revealing that the detection limit for crystal violet can reach 1.96 × 10-11 M, confirming the feasibility of this method.

SIGNIFICANCE AND NOVELTY

By monitoring the in-situ SERS signal of probes during GRR will obtain an "optimal state" of the SERS substrate with optimal gap width and particle size. The SERS substrate preparation and optimization strategy proposed in this article not only provides a simple, efficient, and low-cost method to fabricate surface-clean noble NPs but also paves the way for the in-situ optimization of NPs size and gap width between NPs which could achieve wider applications of SERS.

How to Identify and Quantify Microplastics and Nanoplastics Using Raman Imaging?

While microplastics and nanoplastics are emerging as a big environmental concern, their characterization is still a challenge, particularly for identification and simultaneous quantification analysis where imaging via a hyper spectrum is generally needed. In the past few years, Raman imaging has been greatly advanced, but the analysis protocol is complicated and not yet standardized because imaging analysis is different from traditional analysis. Herein we provide a step-by-step demonstration of how to employ confocal Raman techniques to image microplastics and nanoplastics.

A double defects-dominated flexible TiO2 matrix for in-situ SERS sensing of antibiotic residues in aquatic ecosystem (fish & fishpond water) and their on-site degradation in flowing water

High-performance flexible semiconductor material can be used as an excellent multifunctional matrix for in-situ ultrasensitive surface-enhanced Raman scattering (SERS) detection and synchronous photocatalytic degradation of antibiotic residues in aquatic ecosystem. Here, a calcium-doped TiO2 flexible matrix with double defects (surface oxygen vacancy defect and Ti3+ energy level defect) was developed by its "in-situ one-step" hydrothermal synthesis on cotton fabric for the above purposes. Due to the joint contribution of double defects, a multi-channel charge transfer mode and a high-efficiency carrier separation are achieved, which endows flexible cotton fabric/Ca-doped TiO2 (Cot/Ca-TiO2) substrate with the greatly boosted SERS effect for in-situ detection of antibiotic residues on fish body surface and in fishpond water by a simple wiping or dipping sampling method, even for simultaneous identification of multi-component residues. The detection limits of three antibiotic residues (enrofloxacin, ciprofloxacin and enoxacin) are as low as 10-9 M, which are far lower than the EU standard. More meaningfully, the flexible Cot/Ca-TiO2 can be used as a multifunctional filter-membrane type photocatalyst for efficient on-site degradation of antibiotic residues in flowing fishpond water by a multi-grade photocatalysis means. Moreover, the flexible matrix exhibits good recyclability in both actual detection and photocatalysis.

Design superhydrophobic no-noble metal substrates for highly sensitive and signal stable SERS sensing

Surface-enhanced Raman spectroscopy (SERS) is an analytical technique with a broad range of potential applications in fields such as biomedicine, electrochemistry, and hazardous chemicals. However, it is challenging to develop SERS substrates that are both good sensitive and signal stable. Here we designed a superhydrophobic Nd doped MoS2 uniformly assembled on the activated carbon fiber cloth (CFC) to avoid the coffee ring effect and enrich the analyte, improving the enhancement factor (EF) to 3.9 × 109 and pesticide endosulfan (<10-10) analyte detection. We demonstrate our strategy by density-functional theory (DFT) calculations confirming that both adsorption energy and density of states are enhanced after doping Nd leading to SERS enhancement. Beside DFT calculations, our experiments also provide an effective means to demonstrate that the high SERS sensitivity is based on multiple charge transfer processes combined with the activated carbon cloth. Our results address the limitations of low sensitivity and limit of detection (LOD) of semiconductor SERS substrates for trace analysis and are a step towards practical applications.

Quantitative Analysis of Trace Analytes with Highly Sensitive SERS Tags on Hydrophobic Interface

Surface-enhanced Raman scattering (SERS) presents a promising avenue for trace matter detection by using plasmonic nanostructures. To tackle the challenges of quantitatively analyzing trace substances in SERS, such as poor enrichment efficiency and signal reproducibility, this study proposes a novel approach using Au@internal standard@Au nanospheres (Au@IS@Au NSs) for realizing the high sensitivity and stability in SERS substrates. To verify the feasibility and stability of the SERS performances, the SERS substrates have exhibited exceptional sensitivity for detecting methyl blue molecules in aqueous solutions within the concentration range from 10-4 M to 10-13 M. Additionally, this strategy also provides a feasible way of quantitative detection of antibiotic in the range of 10-4 M to 10-10 M. Trace antibiotic residue on the surface of shrimp in aquaculture waters was successfully conducted, achieving a remarkably low detection limit of 10-9 M. The innovative approach has great potential for the rapid and quantitative detection of trace substances, which marks a noteworthy step forward in environmental detection and analytical methods by SERS.

Combinatorial Effect of Tricomponent Dual-Rim Nanoring Building Blocks: Label-Free SERS Detection of Biomolecules

Detecting weakly adsorbing molecules via label-free surface-enhanced Raman scattering (SERS) has presented a significant challenge. To address this issue, we propose a novel approach for creating tricomponent SERS substrates using dual-rim nanorings (DRNs) made of Au, Ag, and CuO, each possessing distinct functionalities. Our method involves depositing different metals on Pt nanoring skeletons to obtain each nanoring with varying surface compositions while maintaining a similar size and shape. Next, the mixture of these nanorings is transferred into a monolayer assembly with homogeneous intermixing on a solid substrate. The surface of the CuO DRNs has dangling bonds (Cu2+) that facilitate the strong adsorption of carboxylates through the formation of chelating bonds, while the combination of Au and Ag DRNs significantly enhances the SERS signal intensity through a strong coupling effect. Notably, the tricomponent assemblies enable the successful SERS-based analysis of biomolecules such as amino acids, proteins, nucleobases, and nucleotides.

On-site preparation of sandwich plasmonic coupled SERS tape toward pesticide residue determination on food surface

A sandwich plasmonic coupled surface enhanced Raman spectroscopy (SERS) tape is proposed prepared by peeling the chemical printed silver nanocorals (AgNCs) from Cu sheet with adhesive tape, which can sample targets from food surface and sandwich them between substrates and Cu sheet for SERS detection. The solid-to-solid transformation method for fabricating SERS tapes can effectively avoid the weakening of tape stickiness during the preparation process. The sandwich plasmonic coupled structure of AgNC substrate, targets, and Cu sheet display excellent SERS activity (EF = 1.62 × 107) for sensitive determination of analytes. In addition, due to the high heat conductivity of Cu sheet, the thermal effect of laser irradiation during SERS detection cannot damage the AgNC tapes, which ensures the reproducibility of subsequent quantification. The sandwich plasmonic coupled SERS tape is demonstrated to quantify malachite green (MG) and methyl parathion (MP) with good linear coefficients (> 0.98) by two typical calibration plots under different concentration ranges. The limit of detection (LOD) of the method is 0.17 ng/cm2 and 0.48 μg/cm2 (S/N = 3) for MG and MP. This method can realize the quantitative determination of MP and MG on the surface of fruits and fish scale with recoveries of 93-113%. The satisfactory detection results demonstrate the proposed sandwich plasmonic coupled AgNC tape can be successfully applied to SERS-based point-of-care testing (POCT) for pesticide residue determination, which will provide a new path for designing and constructing SERS tapes.

Cotton swabs wrapped with three-dimensional silver nanoflowers as SERS substrates for the determination of food colorant carmine on irregular surfaces

A lightweight, portable, low-cost, and accessible cotton swab was employed as surface enhanced Raman spectroscopy (SERS) matrix template. The silver nanoflowers were in situ grown on the surface of cotton swabs to form three-dimensional Ag nanoflower@cotton swabs (AgNF@CS) SERS substrate with high-density and multi-level hot spots. The SERS performance of AgNFs@CS substrates with various reaction time was systematically studied. The optimal AgNF-120@CS SERS substrate exhibits superior detection sensitivity of 10-10 M for methylene blue, good signal reproducibility, high enhancement factor of 1.4 × 107, and excellent storage stability (over 30 days). Moreover, the AgNF-120@CS SERS substrate also exhibits prominent detection sensitivity of 10-8 M for food colorant of carmine. Besides, the portable AgNF-120@CS SERS substrate is also capable of detecting food colorant residues on irregular food surfaces.

Self-assembled core-shell nanoparticles with embedded internal standards for SERS quantitative detection and identification of nicotine released from snus products

Surface enhanced Raman spectroscopy (SERS) is a unique analytical technique with excellent performance in terms of sensitivity, non-destructive detection and resolution. However, due to the randomness and poor repeatability of hot spot distribution, SERS quantitative analysis is still challenging. Meanwhile, snus is a type of tobacco product that can release nicotine and other components in the mouth without burning, and the rapid detection technique based on SERS can reliably evaluate the amount of nicotine released from snus, which is of great significance for understanding its characteristics and regulating its components. Herein, the strategy was proposed to solve the feasibility of SERS quantitative detection based on self-assembled core-shell nanoparticles with embedded internal standards (EIS) due to EIS signal can effectively correct SERS signal fluctuations caused by different aggregation states and measurement conditions, thus allowing reliable quantitative SERS analysis of targets with different surface affinity. By means of process control, after the Au nanoparticles (Au NPs) were modified with 4-Mercaptobenzonitrile (4-MBN) as internal standard molecules, Ag shell with a certain thickness was grown on the surface of the AuNP@4-MBN, and then the Au@4-MBN@Ag NPs were used to regulate and control the assembly of liquid-liquid interface. The high-density nano-arrays assembled at the liquid-liquid interface ensure high reproducibility as SERS substrates, and which could be used for SERS detection of nicotine released from snus products. In addition, time-mapping research shows that this method can also be used to dynamically monitor the release of nicotine. Moreover, such destruction-free evaluation of the release of nicotine from snus products opens up new perspectives for further research about the impact of nicotinoids-related health programs.

SERS probing of fungal HET-s fibrils formed at neutral and acidic pH conditions

Advances in precision medical diagnostics require accurate and sensitive characterization of pathogens. In particular, health conditions associated with protein misfolding require an identification of proteinaceous amyloid fibrils or their precursors. These pathogenic entities express specific molecular structures, which require ultra-sensitive, molecular-level detection methods. A potentially transformative technique termed nanoplasmonics employs electro-optical phenomena in the vicinity of specially engineered metal nanostructures. A signature application of nanoplasmonics exploits enhancement of inelastic scattering of light in specific locations near metallic nanostructures, known as surface-enhanced Raman scattering (SERS). We applied SERS complemented with confocal microscopy imaging for ultra-sensitive, non-invasive, and label-free characterization of the fungal prion HET-s (218-289) as a model for β-sheet rich amyloid structures. This characterization employed Au-coated dielectric supports as plasmonic substrates. After confirming the formation of HET-s fibrils at both pH 7.5 and 2.8 using negative staining transmission electron microscopy, we subjected the fibril-containing solutions to multimodal analysis using confocal microscopy and SERS. The SERS spectral fingerprints from all HET-s samples expressed vibrational markers for β-structure, unstructured backbone, and aromatic side-chains. However, relative intensities of major SERS bands were pronouncedly different for the two pH levels. We have analyzed potential origins of the most pronounced SERS bands and proposed hypothetical mechanistic models that could explain the observed SERS fingerprints from HET-s fibrils grown at pH 7.5 and 2.8.

Dynamic repulsive interaction enables an asymmetric electron-phonon coupling for improving Raman scattering

Two-dimensional (2D) materials are an excellent platform for surface-enhanced Raman spectroscopy (SERS). For ReS2, the Raman enhancement effect can be highly improved through the dipole-dipole interactions and synergistic resonance effects in the phase-engineering ReS2 films. However, the performance of the substrate can be improved further through regulating the electronic interaction between the ReS2 and probe molecules. Herein, a dynamic coulomb repulsion strategy is proposed to trigger an electronic state redistribution by asymmetric electrostatic interactions. With the phase-engineering ReS2/graphene heterostructure as a prototype, under laser excitation, the generated hot electrons in graphene and ReS2 can repel each other due to Coulomb interaction, which breaks the symmetrical distribution of hot electrons in ReS2, and increases the electronic concentration at the interface between ReS2 and the probe molecule. With R6G as the probe molecule, the asymmetric electron distribution and synergistic resonance effects on their interface improve the limit of detection to 10-12 M with an EF of 2.15 × 108. Meanwhile, the heterostructure also shows good uniformity, stability as well as unique anisotropy. This strategy can be generalized to other 2D heterostructures to obtain the ultrasensitive SERS substrates.

Construction of nanoparticle-on-mirror nanocavities and their applications in plasmon-enhanced spectroscopy

Plasmonic nanocavities exhibit exceptional capabilities in visualizing the internal structure of a single molecule at sub-nanometer resolution. Among these, an easily manufacturable nanoparticle-on-mirror (NPoM) nanocavity is a successful and powerful platform for demonstrating various optical phenomena. Exciting advances in surface-enhanced spectroscopy using NPoM nanocavities have been developed and explored, including enhanced Raman, fluorescence, phosphorescence, upconversion, etc. This perspective emphasizes the construction of NPoM nanocavities and their applications in achieving higher enhancement capabilities or spatial resolution in dark-field scattering spectroscopy and plasmon-enhanced spectroscopy. We describe a systematic framework that elucidates how to meet the requirements for studying light-matter interactions through the creation of well-designed NPoM nanocavities. Additionally, it provides an outlook on the challenges, future development directions, and practical applications in the field of plasmon-enhanced spectroscopy.

2D Materials Nanoarchitectonics for 3D Structures/Functions

It has become clear that superior material functions are derived from precisely controlled nanostructures. This has been greatly accelerated by the development of nanotechnology. The next step is to assemble materials with knowledge of their nano-level structures. This task is assigned to the post-nanotechnology concept of nanoarchitectonics. However, nanoarchitectonics, which creates intricate three-dimensional functional structures, is not always easy. Two-dimensional nanoarchitectonics based on reactions and arrangements at the surface may be an easier target to tackle. A better methodology would be to define a two-dimensional structure and then develop it into a three-dimensional structure and function. According to these backgrounds, this review paper is organized as follows. The introduction is followed by a summary of the three issues; (i) 2D to 3D dynamic structure control: liquid crystal commanded by the surface, (ii) 2D to 3D rational construction: a metal-organic framework (MOF) and a covalent organic framework (COF); (iii) 2D to 3D functional amplification: cells regulated by the surface. In addition, this review summarizes the important aspects of the ultimate three-dimensional nanoarchitectonics as a perspective. The goal of this paper is to establish an integrated concept of functional material creation by reconsidering various reported cases from the viewpoint of nanoarchitectonics, where nanoarchitectonics can be regarded as a method for everything in materials science.

Advancements in Raman imaging for nanoplastic analysis: Challenges, algorithms and future Perspectives

BACKGROUND

While the concept of microplastic (<5 mm) is well-established, emergence of nanoplastics (<1000 nm) as a new contaminant presents a recent and evolving challenge. The field of nanoplastic research remains in its early stages, and its progress is contingent upon the development of reliable and practical analytical methods, which are currently lacking. This review aims to address the intricacies of nanoplastic analysis by providing a comprehensive overview on the application of advanced imaging techniques, with a particular focus on Raman imaging, for nanoplastic identification and simultaneous visualisation towards quantification.

RESULTS

Although Raman imaging via hyper spectrum is a potentially powerful tool to analyse nanoplastics, several challenges should be overcome. The first challenge lies in the weak Raman signal of nanoplastics. To address this, effective sample preparation and signal enhancement techniques can be implemented, such as by analysing the hyper spectrum that contains hundred-to-thousand spectra, rather than a single spectrum. Second challenge is the complexity of Raman hyperspectral matrix with dataset size at megabyte (MB) or even bigger, which can be adopted using different algorithms ranging from image merging to multivariate analysis of chemometrics. Third challenge is the laser size that hinders the visualisation of small nanoplastics due to the laser diffraction (λ/2NA, ∼300 nm), which can be solved with involving the use of super-resolution. Signal processing, such as colour off-setting, Gaussian fitting (via deconvolution), and re-focus or image re-construction, are reviewed herein, which show a great promise for breaking through the diffraction limit.

SIGNIFICANCE

Overall, current studies along with further validation are imperative to refine these approaches and enhance the reliability, not only for nanoplastics research but also for broader investigations in the realm of nanomaterials.

Spatially Uniform and Quantitative Surface-Enhanced Raman Scattering under Modal Ultrastrong Coupling Beyond Nanostructure Homogeneity Limits

We developed a substrate that enables highly sensitive and spatially uniform surface-enhanced Raman scattering (SERS). This substrate comprises densely packed gold nanoparticles (d-AuNPs)/titanium dioxide/Au film (d-ATA). The d-ATA substrate demonstrates modal ultrastrong coupling between localized surface plasmon resonances (LSPRs) of AuNPs and Fabry-Pérot nanocavities. d-ATA exhibits a significant enhancement of the near-field intensity, resulting in a 78-fold increase in the SERS signal for crystal violet (CV) compared to that of d-AuNP/TiO2 substrates. Importantly, high sensitivity and a spatially uniform signal intensity can be obtained without precise control of the shape and arrangement of the nanoscale AuNPs, enabling quantitative SERS measurements. Additionally, SERS measurements of rhodamine 6G (R6G) on this substrate under ultralow adsorption conditions (0.6 R6G molecules/AuNP) show a spatial variation in the signal intensity within 3%. These findings suggest that the SERS signal under modal ultrastrong coupling originates from multiple plasmonic particles with quantum coherence.

Nanogap engineering of 3D nanoraspberries into 2D plasmonic nanoclusters toward improved SERS performance

3D raspberry-like core/satellite nanostructures were prepared by controlled surface functionalization of silica spheres using crosslinked poly(4-vinylpyridine) (P4VP) chains with known binding affinity for gold nanoparticles (AuNPs). The 3D SiO2-g-P(4VP-co-DVB)/AuNP nanoraspberries can be further transformed into 2D plasmonic nanoclusters by etching the silica core with hydrofluoric acid (HF). After the transformation, the interparticle distance between the AuNPs dramatically reduced from a 10 nm scale to sub 2 nm. Owing to the strong electromagnetic field generated by the plasmonic coupling between AuNPs in very close proximity, the established P(4VP-co-DVB)/AuNP nanoclusters provided strong and undisturbed Raman signals as a SERS substrate. In addition, benefiting from the stabilizing effect of the crosslinked P(4VP-co-DVB) network, the prepared SERS substrate has the advantages of good uniformity, stability and reproducibility, as well as strong SERS enhancement, endowing it with great potential for rapid and efficient SERS detection.

Plasmonic Multi-Layered Built-in Hotspots Nanogaps for Effectively Activating Analytes

Multi-layered plasmonic nanostructures are able to highly promote the near-field confinement and effectively activate analytes, which are of predominate significance but are extremely challenging. Herein, the semi-open Au core@carved AuAg multi-shell superstructure nanoparticles (multi-Au@Ag-Au NPs, multi = mono, bi, tri, tetra, and penta) are reported with a high designability on electromagnetic field and capability of effectively capturing analytes. By controlling synthetic parameters such as the number of galvanic exchange and Ag growth, multi-Au@Ag-Au NPs are successfully obtained, with tunable layer numbers and asymmetric nanoholes. Due to collective plasmon oscillations of multi-layered built-in nanogaps, the electromagnetic field strength of a single penta-Au@Ag-Au entity reach 48841. More importantly, the penta-Au@Ag-Au NPs show a remarkable light-harvesting capability, which is adaptive to different Raman lasers, supporting high-diversity detection. Additionally, the structural specificity allows analytes to be sufficiently captured into interior hotspots, and further achieve highly sensitive detection with limit of detection down to 3.22 × 10-12  M. This study not only provides an effective pathway for integrating abundant hotspots and activating target molecules in single plasmonic superstructure, but stimulates advancements in SERS substrates for various applications.

Self-Organized SERS Substrates with Efficient Analyte Enrichment in the Hot Spots

One of the requirements of an efficient surface-enhanced Raman spectroscopy (SERS) substrate is a developed surface morphology with a high density of "hot spots", nm-scale spacings between plasmonic nanoparticles. Of particular interest are plasmonic architectures that could enable self-localization (enrichment) of the analyte in the hot spots. We report a straightforward method of fabrication of efficient SERS substrates that comply with these requirements. The basis of the substrate is a large-area film of tightly packed SiO2 spheres formed by their quick self-assembling upon drop casting from the solution. Thermally evaporated thin Ag layer is converted by quick thermal annealing into nanoparticles (NPs) self-assembled in the trenches between the silica spheres, i.e., in the places where the analyte molecules get localized upon deposition from solution and drying. Therefore, the obtained substrate morphology enables an efficient enrichment of the analyte in the hot spots formed by the densely arranged plasmonic NPs. The high efficiency of the developed SERS substrates is demonstrated by the detection of Rhodamine 6G down to 10-13 mol/L with an enhancement factor of ∼108, as well as the detection of low concentrations of various nonresonant analytes, both small dye molecules and large biomolecules. The developed approach to SERS substrates is very straightforward for implementation and can be further extended to using gold or other plasmonic NPs.

Designing Surface and Interface Structures of Copper-Based Catalysts for Enhanced Electrochemical Reduction of CO2 to Alcohols

Electrochemical CO2 reduction (ECR) has emerged as a promising solution to address both the greenhouse effect caused by CO2 emissions and the energy shortage resulting from the depletion of nonrenewable fossil fuels. The production of multicarbon (C2+) products via ECR, especially high-energy-density alcohols, is highly desirable for industrial applications. Copper (Cu) is the only metal that produces alcohols with appreciable efficiency and kinetic viability in aqueous solutions. However, poor product selectivity is the main technical problem for applying the ECR technology in alcohol production. Extensive research has resulted in the rational design of electrocatalyst architectures using various strategies. This design significantly affects the adsorption energetics of intermediates and the reaction pathways for alcohol production. In this review, we focus on the design of effective catalysts for ECR to alcohols, discussing fundamental principles, innovative strategies, and mechanism understanding. Furthermore, the challenges and prospects in utilizing Cu-based materials for alcohol production via ECR are discussed.

Two-Dimensional SERS Sensor Array for Identifying and Visualizing the Gas Spatial Distributions of Two Distinct Odor Sources

The spatial distribution of gas emitted from an odor source provides valuable information regarding the composition, size, and localization of the odor source. Surface-enhanced Raman scattering (SERS) gas sensors exhibit ultra-high sensitivity, molecular specificity, rapid response, and large-area detection. In this paper, a SERS gas sensor array was developed for visualizing the spatial distribution of gas evaporated from benzaldehyde and 4-ethylbenzaldehyde odor sources. The SERS spectra of the gas were collected by scanning the sensor array using an automatic detection system. The non-negative matrix factorization algorithm was employed to extract feature and concentration information at each spot on the sensor array. A heatmap image was generated for visualizing the gas spatial distribution using concentration information. Gaussian fitting was applied to process the image for localizing the odor source. The size of the odor source was estimated using the processed image. Moreover, the spectra of benzaldehyde, 4-ethylbenzaldehyde, and their gas mixture were simultaneously detected using one SERS sensor array. The feature information was recognized using a convolutional neural network with an accuracy of 98.21%. As a result, the benzaldehyde and 4-ethylbenzaldehyde odor sources were identified and visualized. Our research findings have various potential applications, including odor source localization, environmental monitoring, and healthcare.

Electromagnetic enhancement spectra of one-dimensional plasmonic hotspots along silver nanowire dimer derived via surface-enhanced fluorescence

We developed a spectroscopic method for directly obtaining the spectra of electromagnetic (EM) enhancement of plasmonic hotspots (HSs). The method was applied to one-dimensional (1D) HSs generated between silver nanowire (NW) dimers. The EM enhancement spectra were derived by dividing the spectra of surface-enhanced fluorescence (SEF) from single NW dimers with SEF obtained from large nanoparticle aggregates, where aggregate-by-aggregate variations in the SEF spectra were averaged out. Some NW dimers were found to exhibit EM enhancement spectra that deviated from the plasmon resonance Rayleigh scattering spectra, indicating that their EM enhancement was not generated by superradiant plasmons. These experimental results were examined by numerical calculation based on the EM mechanism by varying the morphology of NW dimers. The calculations reproduced the spectral deviations as the NW diameter dependence of EM enhancement. Phase analysis of the enhanced EM near-fields along the 1D HSs revealed that the dipole-quadrupole coupled plasmon, which is a subradiant mode, mainly generates EM enhancement for dimers with NW diameters larger than ∼80 nm, which was consistent with scanning electron microscopic measurements.

Application of Nanohybrid Substrates with Layer-by-Layer Self-Assembling Properties to High-Sensitivity Surface-Enhanced Raman Scattering Detection

The present study was conducted to prepare and investigate large-area, high-sensitivity surface-enhanced Raman scattering (SERS) substrates. Organic/inorganic nanohybrid dispersants consisting of an amphiphilic triblock copolymer (hereafter referred to simply as "copolymer") and graphene oxide (GO) were used to stabilize the growth and size of gold nanoparticles (AuNPs). Ion-dipole forces were present between the AuNPs and copolymer dispersants, while the hydrogen bonds between GO and the copolymer prevented the aggregation of GO, thereby stabilizing the AuNP/GO nanohybrids. Transmission electron microscopy (TEM) revealed that the AuNPs had particle sizes of 25-35 nm and a relatively uniform size distribution. The AuNP/GO nanohybrids were deposited onto the glass substrate by using the solution drop-casting method and employed for SERS detection. The self-assembling properties of two-dimensional sheet-like GO led to a regular lamellar arrangement of AuNP/GO nanohybrids, which could be used for the preparation of large-area SERS substrates. Following removal of the copolymer by annealing at 300 °C for 2 h, measurements were obtained under scanning electron microscopy. The results confirmed that 2D GO nanosheets were capable of stabilizing AuNPs, with the final size reaching approximately 40 nm. These AuNPs were adsorbed on both sides of the GO nanosheets. Because the GO nanosheets were merely 5 nm-thick, a good three-dimensional hot-junction effect was generated along the z-axis of the AuNPs. Lastly, the prepared material was used for the SERS detection of rhodamine 6G (R6G), a commonly used highly fluorescent dye. An enhancement factor (EF) of up to 3.5 × 106 was achieved, and the limit of detection was approximately 10-10 M. Detection limits of 10-10 M and < 10-10 M were also observed with the detection of Direct Blue 200 and the biological molecule adenine. It is therefore evident that AuNP/copolymer/GO nanohybrids are large-area flexible SERS substrates that hold great potential in environmental monitoring and biological system detection applications.

Physiochemical Coupled Dynamic Nanosphere Lithography Enabling Multiple Metastructures from Single Mask

Metastructures are widely used in photonic devices, energy conversion, and biomedical applications. However, to fabricate multiple patterns continuously in single etching protocol with highly tunable photonic properties is challenging. Here, a simple and robust dynamic nanosphere lithography is proposed by inserting a spacer between the nanosphere assembly and the wafer. The nanosphere diameter decrease and uneven penetration of the spacer during etching lead to a dynamic masking process. Coupled anisotropic physical ion sputtering and ricocheting with isotropic chemical radical etching achieve highly tunable structures with various 3D patterns continuously forming through a single etching process. Specifically, the nanosphere diameters define the periodicity, the etched spacer forms the upper parts, and the wafer forms the lower parts. Each part of the structure is highly tunable through changing nanosphere diameter, spacer thickness, and etch conditions. Using this protocol, numerous structures of varying sizes including nanomushrooms, nanocones, nanopencils, and nanoneedles with diverse shapes are realized as proof of concepts. The broadband antireflection ability of the nanostructures and their use in surface-enhanced Raman spectroscopy are also demonstrated for practical application. This method substantially simplifies the fabrication procedure of various metastructures, paving the way for its application in multiple disciplines especially in photonic devices.