Kinetics and Mechanism of Ultrasonic Activation of Persulfate: An in Situ EPR Spin Trapping Study

Rethinking alternatives to fluorinated pops in aqueous environment and corresponding destructive treatment strategies

Alternatives are being developed to replace fluorinated persistent organic pollutants (POPs) listed in the Stockholm Convention, bypass environmental regulations, and overcome environmental risks. However, the extensive usage of fluorinated POPs alternatives has revealed potential risks such as high exposure levels, long-range transport properties, and physiological toxicity. Therefore, it is imperative to rethink the alternatives and their treatment technologies. This review aims to consider the existing destructive technologies for completely eliminating fluorinated POPs alternatives from the earth based on the updated classification and risks overview. Herein, the types of common alternatives were renewed and categorized, and their risks to the environment and organisms were concluded. The efficiency, effectiveness, energy utilization, sustainability, and cost of various degradation technologies in the treatment of fluorinated POPs alternatives were reviewed and evaluated. Meanwhile, the reaction mechanisms of different fluorinated POPs alternatives are systematically generalized, and the correlation between the structure of alternatives and the degradation characteristics was discussed, providing mechanistic insights for their removal from the environment. Overall, the review supplies a theoretical foundation and reference for the control and treatment of fluorinated POPs alternatives pollution.

Long-Term Stable Dispersion of Multiwalled Carbon Nanotubes by Peroxydisulfate upon Ultrasonication Activation

Poor dispersibility of carbon nanotubes greatly hinders their practical applications. Herein, a long-term stable dispersion of multiwalled carbon nanotubes (MWCNTs) in peroxydisulfate (PDS) is achieved. MWCNTs at 40 mg L-1 are completely dispersed by PDS upon ultrasonication (US/PDS) within 64 min and a stable dispersion is maintained at least 20 days. Mechanistically, US created defects on the nanomaterial and PDS-origin free radicals attacked these defects to introduce O-containing moieties (─OH and ─COOH). Interestingly, dispersion efficiency of MWCNTs by US/PDS initially at pH 7 and 3.8 is comparable, but lower than that initially at pH 12. Both •OH and SO4 •- are produced under alkaline condition, while SO4 •- is the dominant free radicals initially at pH 7 and 3.8 during the whole dispersion period. Stronger dispersion of MWCNTs initially at pH 12 resulted from greater amounts of O-containing moieties mainly in ─OH (46.32%) rather than ─COOH (24.19%) form. This differential more strongly promotes MWCNTs-water interaction via hydrogen bonding, thereby enhancing the dispersion. Notably, no significant mass loss of MWCNTs occurred during dispersion. Overall, the developed method achieves long-term stable dispersion of MWCNTs in a manner that can significantly extend their applications.

Ultrasonic treatment of endocrine disrupting compounds, pharmaceuticals, and personal care products in water: An updated review

Pharmaceuticals, personal care products (PPCPs), and endocrine-disrupting compounds (EDCs) have seen a recent sustained increase in usage, leading to increasing discharge and accumulation in wastewater. Conventional water treatment and disinfection processes are somewhat limited in effectively addressing this micropollutant issue. Ultrasonication (US), which serves as an advanced oxidation process, is based on the principle of ultrasound irradiation, exposing water to high-frequency waves, inducing thermal decomposition of H2O while using the produced radicals to oxidize and break down dissolved contaminants. This review evaluates research over the past five years on US-based technologies for the effective degradation of EDCs and PPCPs in water and assesses various factors that can influence the removal rate: solution pH, temperature of water, presence of background common ions, natural organic matter, species that serve as promoters and scavengers, and variations in US conditions (e.g., frequency, power density, and reaction type). This review also discusses various types of carbon/non-carbon catalysts, O3 and ultraviolet processes that can further enhance the degradation efficiency of EDCs and PPCPs in combination with US processes. Furthermore, numerous types of EDCs and PPCPs and recent research trends for these organic contaminants are considered.

Simultaneously Producing H2 and H2O2 by Photocatalytic Water Splitting: Recent Progress and Future

The solar-driven overall water splitting (2H2O→2H2 + O2) is considered as one of the most promising strategies for reducing carbon emissions and meeting energy demands. However, due to the sluggish performance and high H2 cost, there is still a big gap for the current photocatalytic systems to meet the requirements for practical sustainable H2 production. Economic feasibility can be attained through simultaneously generating products of greater value than O2, such as hydrogen peroxide (H2O2, 2H2O→H2 + H2O2). Compared with overall water splitting, this approach is more kinetically feasible and generates more high-value products of H2 and H2O2. In several years, there has been an increasing surge in exploring the possibility and substantial progress has been achieved. In this review, a concise overview of the importance and underlying principles of PIWS is first provided. Next, the reported typical photocatalysts for PIWS are discussed, including commonly used semiconductors and cocatalysts, essential design features of these photocatalysts, and connections between their structures and activities, as well as the selected approaches for enhancing their stability. Then, the techniques used to quantify H2O2 and the operando characterization techniques that can be employed to gain a thorough understanding of the reaction mechanisms are summarized. Finally, the current existing challenges and the direction needing improvement are presented. This review aims to provide a thorough summary of the most recent research developments in PIWS and sets the stage for future advancements and discoveries in this emerging area.

Activating peroxymonosulfate with MOF-derived NiO-NiCo2O4/titanium membrane for water treatment: A non-radical dominated oxidation mechanism

Traditional peroxymonosulfate (PMS) catalytic membranes dominated by radical pathways often face interference from complex components in water bodies. Herein, we employed a controlled electro-deposition technique to coat a Ni-Co metal-organic framework (MOF) precursor onto titanium hollow fiber membrane (THFM), followed by high-temperature calcination to synthesize a MOF-derived NiO-NiCo2O4/THFM (M-NNCO-THFM) PMS catalytic membrane. Then, the M-NNCO-THFM filtration integrated with PMS activation (MFPA process) for water treatment. Experimental results demonstrated that the M-NNCO-THFM MFPA process successfully achieved complete phenol (PE) removal via a non-radical-dominated degradation pathway, involving singlet oxygen (1O2) and electron transfer, while exhibiting wide pH adaptability and exceptional stability in complex water matrices. Mechanism analysis revealed that the electron transfer process was significantly enhanced by the MOF-derived heterojunction structure, which increased the flat-band potential from 0.39 eV to 0.56 eV, thereby facilitating efficient electron transfer for PE removal. The non-radical 1O2 pathway was primarily due to the cycling of metal valence states (Ni2+/Co3+), leading to the reduction of Co2+ and its reaction with PMS, resulting in the generation of reactive species. Furthermore, electrochemical measurements indicated that the M-NNCO-THFM exhibited lower charge transfer resistance and enhanced charge transfer efficiency compared to non-MOF-derived NNCO-THFM, corresponding to the superior catalytic performance and electrochemically active surface area of M-NNCO-THFM.

Were Persulfate-Based Advanced Oxidation Processes Really Understood? Basic Concepts, Cognitive Biases, and Experimental Details

Persulfate (PS)-based advanced oxidation processes (AOPs) for pollutant removal have attracted extensive interest, but some controversies about the identification of reactive species were usually observed. This critical review aims to comprehensively introduce basic concepts and rectify cognitive biases and appeals to pay more attention to experimental details in PS-AOPs, so as to accurately explore reaction mechanisms. The review scientifically summarizes the character, generation, and identification of different reactive species. It then highlights the complexities about the analysis of electron paramagnetic resonance, the uncertainties about the use of probes and scavengers, and the necessities about the determination of scavenger concentration. The importance of the choice of buffer solution, operating mode, terminator, and filter membrane is also emphasized. Finally, we discuss current challenges and future perspectives to alleviate the misinterpretations toward reactive species and reaction mechanisms in PS-AOPs.

Novel enhanced defluorination of perfluorooctanoic acids by biochar-assisted ultrasound coupling ferrate: Performance and mechanism

An ultrasound (US)/biochar (BC)/ferrate (Fe (VI)) system was firstly proposed to enhance perfluorooctanoic acid (PFOA) defluorination. It achieved 93 % defluorination optimally, higher than the sum of 77 % (28 % and 49 % for US/BC and US/Fe (VI) respectively), implying synergistic effect. Besides, the mechanism study confirmed that, this system can not only increase the specific surface area of BC and the generation of reactive oxidant species (ROS), enriching the active sites and forming new oxygen-containing functional groups, but also promote the formation of intermediate iron species. The PFOA degradation in the US/BC/Fe (VI) was probably an adsorption-degradation process, both ROS and electron transfer promoted the defluorination. Additionally, its sustainability was also demonstrated with 14 % reduced defluorination percentage after five cycles of BC. Overall, the synergistic effect of the US/BC/Fe (VI) and its enhancing mechanism for PFOA defluorination were clarified firstly, which contributes to the development of biochar for assisting polyfluoroalkyl substances degradation.

Green and Low-Cost Alkali-Polyphenol Synergetic Self-Catalysis System Access to Fast Gelation of Self-Healable and Self-Adhesive Conductive Hydrogels for Self-Powered Triboelectric Nanogenerators

Biomass-based hydrogels have attracted great attention in flexible and sustainable self-powered power sources but struggled to fabricate in a green, high-efficiency, and low-cost manner. Herein, a novel and facile alkali-polyphenol synergetic self-catalysis system is originally employed for the fast gelation of self-healable and self-adhesive lignin-based conductive hydrogels, which can be regarded as hydrogel electrodes of flexible triboelectric nanogenerators (TENGs). This synergy self-catalytic system comprises aqueous alkali and polyphenol-containing lignin, in which alkali-activated ammonium persulfate (APS) significantly accelerates the generation of radicals and initiates the polymerization of monomers, while polyphenol acts as a stabilizer to avoid bursting polymerization from inherent radical scavenging ability. Furthermore, multiple hydrogen bonds between lignin biopolymers and polyacrylamide (PAM) chains impart lignin-based hydrogels with exceptional adhesiveness and self-healing properties. Intriguingly, the alkaline conditions not only contribute to the solubility of lignin but also impart superior ionic conductivity of lignin-based hydrogel that is applicable to flexible TENG in self-powered energy-saving stair light strips, which holds great promise for industrial applications of soft electronics.

Enhanced electron transfer for activation of peroxymonosulfate via MoS2 modified iron-based perovskite

The increasing use of fluoroquinolone antibiotics, which are found in various environmental media, is a constant threat to ecological safety and human health. In this paper, SrFeO3@MoS2 heterogeneous catalyst was prepared to activate peroxymonosulfate (PMS) for the degradation of levofloxacin (LVO). The characteristics of SrFeO3@MoS2 samples were studied and the optimum conditions for the removal of LVO by SrFeO3@MoS2/PMS system were investigated. The removal of LVO by the SrFeO3@MoS2-0.3/PMS system could reach 96.06% within 20 min of reaction. The effect of inorganic anions (SO42-, Cl-, NO3- and H2PO4-) commonly found in actual water bodies on catalytic reaction was explored. The reusability investigation revealed that the catalyst could still remove 88.06% of LVO within 20 min after four cycles. Moreover, SO4•-, •OH and 1O2 were identified by Electron Paramagnetic Resonance (EPR) tests and scavenger experiments, where the SO4•- and •OH were dominant reactive species. Combining with the XPS characterisation, the activation mechanism of SrFeO3@MoS2-0.3/PMS was proposed, and the oxygen vacancies and transition metals on the sample surface were active sites of PMS activation. Furthermore, the possible degradation pathways of LVO were well-established based on the detected intermediates.

Enhanced dewaterability of sludge by Fe(II)-sludge biochar activate persulfate

Sludge biochar supported Fe(II) (Fe(II)-SBC) was successfully prepared using waste activated sludge as peroxydisulfate (PDS) activator to condition sludge for deep dewatering. The experimental results showed that Fe(II)-SBC with FeO on it could effectively active PDS to produce SO 4 - ⋅ and HO ⋅ . The radicals could destroy the structure of sludge cells and extracellular polymeric substance (EPS), transformed the hydrophilic and tightly bound EPS into soluble-EPS, degrade partial proteins and polysaccharides and released bound water. The negatively charged groups on sludge floc were dripped off by SO 4 - ⋅ /HO ⋅ or neutralized with Fe2+, Fe3+, H+, or Fe(II)-SBC, leading to an increase in zeta potential to -2.24 mV and sludge destabilization. The residual Fe(II)-SBC served as a skeleton builder that decreased the compression coefficient of the sludge cake to 0.75. Under the combined functions, the CST and SRF were reduced by 70% and 82.7%, respectively, and Wc was reduced to 72.4%. The byproducts of Fe3+ and SO42- finally remained in sludge cake in the form of NaFeSi2O6 and CaSO4.

Carbon nanotube supported cobalt nickel sulphide nano-catalyst for degradation of chloroquine phosphate with peroxymonosulphate

Carbon nanotubes supported cobalt nickel sulphide nanoparticles (nano-NiCo2S4@CNTs) were successfully prepared by a hydrothermal method as heterogeneous catalyst which can be used as an activator of peroxymonosulphate (PMS) for the degradation of chloroquine phosphate (CQP). Based on characterisation techniques, the prepared catalyst has excellent surface properties and structural stability. When different concentrations of CQP were treated with 0.2 g/L nano-NiCo2S4@CNTs and 1.0 mM PMS, the highest degradation rate could reach 99.86% after 30 min. Under the interference of pH, common anions and humic acid in the water environment, the reaction system can still achieve high degradation efficiency, showing excellent anti-interference ability and practical applicability. Furthermore, in the nano-NiCo2S4@CNTs/PMS system, according to the identification results of reactive oxygen species, the free radical and non-free radical pathway are responsible for the degradation of CQP, and the PMS mechanism activation was comprehensively proposed. Twelve intermediate products were detected in the degradation process, and the possible degradation pathways of CQP were proposed. This toxicity analysis demonstrates that the intermediate products formed during CQP degradation pose lower environmental risks compared to the original pollutant. In addition, after using the catalyst four cycles, the removal efficiency of CQP remains above 80%, indicating the excellent reusability and low metal ion leaching characteristics. Therefore, the nano-NiCo2S4@CNTs synthesised in this research has broad application prospects in activating PMS for wastewater treatment.

Efficient degradation and detoxification of antibiotic Fosfomycin by UV irradiation in the presence of persulfate

Fosfomycin (FOS) as a widely used antibiotic has been found in abundance throughout the environment, but little effort has been devoted to its treatment. In this study, we systemically looked into the degradation of FOS by ultraviolet-activated persulfate (UV/PS) in aqueous solutions. Our findings demonstrated that FOS can be degraded efficiently under the UV/PS, e.g., >90 % of FOS was degraded with 19,200 mJ cm-2 of UV irradiance and 20 μM of PS. HO was the dominant radical responsible for FOS degradation. FOS degradation increased as PS dosage increased, and higher degradation efficiency was observed at neutral pH. Natural water constitutes either promoted (e.g., Cu2+, Fe3+, and SO42-) or inhibited (e.g., humic acid, HCO3-, and CO32-) FOS degradation to varying degrees. Hydroxyl substitution, CP bond cleavage, and coupling reactions were the major degradation pathways for FOS degradation. Finally, the toxicity evaluation revealed that FOS was toxic to E. coli and S. aureus, but the toxicity of the intermediate products of FOS to E. coli and S. aureus rapidly decreased over time after UV/PS treatment. Therefore, these findings provided a fundamental understanding of the transformation process of FOS and supplied useful information for the environmental elimination of FOS contamination and its toxicity.

Abatement of Aromatic Contaminants from Wastewater by a Heat/Persulfate Process Based on a Polymerization Mechanism

A novel approach to the abatement of pollutants consisting of their conversion to separable solid polymers is explored by a heat/persulfate (PDS) process for the treatment of high-temperature wastewaters. During this process, a simultaneous decontamination and carbon recovery can be achieved with minimal use of PDS, which is significantly different from conventional degradation processes. The feasibility of this process is demonstrated by eight kinds of typical organic pollutants and by a real coking wastewater. For the treatment of the selected pollutants, 30.2-91.9% DOC abatement was achieved with 24.8-91.2% carbon recovery; meanwhile, only 5.2-47.0% of PDS was consumed compared to a conventional degradation process. For the treatment of a real coking wastewater, 71.0% DOC abatement was achieved with 66.0% carbon recovery. With phenol as a representative compound, our polymerization-based heat/PDS process is applicable in a wide pH range (3.5-9.0) with a carbon recovery of >87%. Both SO4•- and HO• can be initiators for polymerization, with different contribution ratios under various conditions. Phenol monomers are semioxidized to form phenolic radicals, which are polymerized via chain transfer or chain growth processes to form separable solid phenol polymers, benzenediol polymers, and cross-linked polymers.

Sulfur-doped α-Fe2O3 as an efficient and recycled peroxydisulfate activator toward organic pollutant degradation: performance and mechanism

Sulfur (S)-doped α-Fe2O3 has been regarded as an excellent catalyst for eliminating organic pollutants in the photo-Fenton-like reaction. Yet, the synthetic complexity and extremely low activity in the dark Fenton-like reaction still need to be solved. In this study, magnetic α-Fe2O3 with sulfide was successfully fabricated via hydrothermal and calcination processes, for the first time, where thiourea acted as both S source and reducing agent, and then, it was applied for activating peroxydisulfate (PDS) to degrade organic contaminants. Important influencing factors were systemically investigated, and the results showed that this catalyst activating PDS was highly effective in the removal of organic pollutants in dark- and photo-Fenton-like reactions. In addition, the catalyst possessed good stability and recyclable ability. The structure of catalyst was analyzed by several characterizations, such as XRD and XPS. The results revealed that sulfide had an important effect on the structure and performance of α-Fe2O3. The detected mechanism indicated that the main reactive oxygen species were altered after switching from darkness to LED illumination. This work offered a promising method to rationally design for S/α-Fe2O3 in the environmental remediation.

Realism-based assessment of the efficacy of potassium peroxymonosulphate on Stenotrophomonas maltophilia biofilm control

The potential of pentapotassium bis(peroxymonosulphate) bis(sulphate) (OXONE) to control biofilms in drinking water distribution systems (DWDS) was evaluated and compared to chlorine disinfection. Mature biofilms of drinking water (DW)-isolated Stenotrophomonas maltophilia were formed using a simulated DWDS with a rotating cylinder reactor (RCR). After 30 min of exposure, OXONE at 10 × minimum bactericidal concentration (MBC) caused a significant 4 log reduction of biofilm culturability in comparison to the unexposed biofilms and a decrease in the number of non-damaged cells below the detection limit (4.8 log cells/cm2). The effects of free chlorine were restricted to approximately 1 log reduction in both biofilm culturability and non-damaged cells. OXONE in synthetic tap water (STW) at 25 ºC was more stable over 40 days than free chlorine in the same conditions. OXONE solution exhibited a disinfectant decrease of about 10% of the initial concentration during the first 9 days, and after this time the values remained stable. Whereas possible reaction of chlorine with inorganic and organic substances in STW contributed to free chlorine depletion of approximately 48% of the initial concentration. Electron paramagnetic resonance (EPR) spectroscopy studies confirmed the presence of singlet oxygen and other free radicals during S. maltophilia disinfection with OXONE. Overall, OXONE constitutes a relevant alternative to conventional DW disinfection for effective biofilm control in DWDS.

Merits and Limitations of Radical vs. Nonradical Pathways in Persulfate-Based Advanced Oxidation Processes

Urbanization and industrialization have exerted significant adverse effects on water quality, resulting in a growing need for reliable and eco-friendly treatment technologies. Persulfate (PS)-based advanced oxidation processes (AOPs) are emerging as viable technologies to treat challenging industrial wastewaters or remediate groundwater impacted by hazardous wastes. While the generated reactive species can degrade a variety of priority organic contaminants through radical and nonradical pathways, there is a lack of systematic and in-depth comparison of these pathways for practical implementation in different treatment scenarios. Our comparative analysis of reaction rate constants for radical vs. nonradical species indicates that radical-based AOPs may achieve high removal efficiency of organic contaminants with relatively short contact time. Nonradical AOPs feature advantages with minimal water matrix interference for complex wastewater treatments. Nonradical species (e.g., singlet oxygen, high-valent metals, and surface activated PS) preferentially react with contaminants bearing electron-donating groups, allowing enhancement of degradation efficiency of known target contaminants. For byproduct formation, analytical limitations and computational chemistry applications are also considered. Finally, we propose a holistically estimated electrical energy per order of reaction (EE/O) parameter and show significantly higher energy requirements for the nonradical pathways. Overall, these critical comparisons help prioritize basic research on PS-based AOPs and inform the merits and limitations of system-specific applications.

Chitin-derived biochar with nitrogen doping to activate persulfate for phenol degradation: Application potential and electron transfer pathway in system

The fast and efficient removal of organic pollutants (e.g., phenolics) remains one of the focus problems in environment pollution. Thus, a chitin-derived biochar with nitrogen doping (N-BC) was successfully prepared at a lower calcination temperature of 600 °C, which is environmentally friendly and energy saving. The N-BC was analyzed by SEM, FTIR, BET, XRD, XPS and Raman spectroscopy to confirm that the doping of nitrogen element provided sufficient defect sites to promote the activation of persulfate (PDS). Quenching experiments and EPR results revealed the presence of •OH and •O₂^- contributed to phenol degradation in N-BC 600/PDS system. In addition, the linear sweep voltammogram experiments also demonstrated the existence of electron transfer pathway. The electrons were donated from phenol and shifted to PDS through N-BC. The graphitic N and carbon defects in N-BC served as the active sites of the reaction and involved absorption and transfer of electrons as the key character. Moreover, the removal rates of phenol and TOC reached 98.8% and 58.2% within 2 h, indicating that N-BC effectively activated the persulfate to degrade phenol. This study provides the theoretical support and potential applications for the activation of persulfate by nitrogen-doped biochar to degrade other phenolic compounds.

Insight into Chinese medicine residue biochar combined with ultrasound for persulfate activation in atrazine degradation: Acanthopanax senticosus precursors, synergistic effects and toxicity assessment

The synergistic activation of persulfate by multiple factors could degrade pollutants more efficiently. However, the co-activation method based on metal ions has the risk of leakage. The non-metallic coupling method could achieve the same efficiency as the metal activation and meanwhile release environmental stress. In this study, the original biochar (BC) was prepared through using Chinese medicinal residue of Acanthopanax senticosus as the precursor. Compared with other biochar, the pore size structure was higher and toxicity risk was lower. The ultrasonic (US)/Acanthopanax senticosus biochar (ASBC)/persulfate oxidation system was established for Atrazine (ATZ). Results showed that 45KHz in middle and low frequency band cooperated with ASBC600 to degrade nearly 70 % of ATZ within 50 min, and US promoted the formation of SO₄^- and OH. Meanwhile, the synergy index of US and ASBC was calculated to be 1.18, which showed positive synergistic effect. Finally, the potential toxicity was examined by using Toxicity Characteristic Leaching Procedure (TCLP) and luminescent bacteria. This study provides a promising way for the activation of persulfate, which is expected to bring a new idea for the win-win situation of pollutant degradation and solid waste resource utilization.

Complete defluorination of perfluorooctanoic acid (PFOA) by ultrasonic pyrolysis towards zero fluoro-pollution

Advanced oxidation/reduction of PFAS is challenged and concerned by the formation of toxic, short-chain intermediates during water treatments. In this study, we investigated the complete defluorination of PFOA by ultrasound/persulfate (US/PS) with harmless end-products of CO₂, H₂O, and F^‒ ions. We observed 100% defluorination after 4 h of US treatment alone with a power input of 900 W. PS addition, however, suppressed defluorination. We demonstrated by kinetics-fitted Langmuir-type adsorption modeling, the added PS increased competition with PFOA for adsorption sites on the bubble-water interface where radical oxidation and pyrolysis may occur. Providing sulfate (SO₄^•-) and hydroxyl (^•OH) radicals by means other than US did not defluorinate PFOA, indicating that pyrolysis likely contributes to the high defluorination performance. Bond dissociation energies for CC and CF were independent of pressure but decreased at elevated temperatures within cavitation bubbles (i.e., 5000 K) favoring the pyrolysis reactions. Furthermore, bond length calculations indicated that PFOA cleavage only begins to occur at temperatures in excess of those generated at the bubble interface (i.e., >1500 K) at the femtosecond level. This suggests that PFOA vaporizes or injects by nanodrops upon attachment to the cavitation bubble, enters the bubble, and is then cleaved within the bubble by pyrolysis. Our research in low-frequency ultrasonic horn system challenges the previous founding that defluorination of PFOA initiates and occurs at the bubble-water interface. We describe here that supplementing US-based processes with complementary treatments may have undesired effects on the efficacy of US. The mechanistic insights will further promote the implementation of US technology for PFAS treatment in achieving the zero fluoro-pollution goal.

Degradation of 2,4-diclorophenol via coupling zero valent iron and hydrodynamic cavitation for sulfite activation: A turbulence modeling

The 2,4-dichlorophenol (2,4-DCP) is an important chemical precursor that can affect human endocrine system and induce pathological symptoms. This research reports the degradation of 2,4-DCP using lab-scale hydrodynamic cavitation (HC) approach, which is considered a green and effective method. To promote the degradation efficiency, the zero-valent iron (Fe⁰) as the catalyst for sulfate radical (SO₄^•-) generation via activation of sulfite (SO₃^2-) salts was simultaneously used. Degradation efficiency was favorable in acidic pH than the alkaline pH due to higher production of active radicals and was dependent on the dose of Fe⁰ and SO₃^2-. Under optimal condition, degradation efficiency by Fe⁰/HC/sulfite (96.67 ± 2.90%) was considerably enhanced compared to HC alone (45.37 ± 2.26%). Quenching experiments suggested that SO₄^•-, ^•OH, ¹O₂, and O₂^•- radicals were involved in the degradation of 2,4-DCP by Fe⁰/HC/sulfite process, but the dominant role was related to ^•OH (70.09% contribution) and SO₄^•- (29.91% contribution) radicals. From the turbulence model, turbulent pressure at venturi throat decreased from -0.42 MPa to -2.02 MPa by increasing the inlet pressure from 1.0 to 4.0 bar and increase in pressure gradient has intensified bubble collapse due to higher turbulence tension.

Facile fabrication of mesoporous carbon-anchored cobalt ferrite nanoparticles as a heterogeneous activator of peroxymonosulfate for efficient degradation of Congo red

Herein, mesoporous carbon-anchored cobalt ferrite nanocomposites (nano-CoFe₂O₄@MC) were fabricated using a hydrothermal method for application as heterogeneous catalysts to activate peroxymonosulfate (PMS), in order to solve the problems of low activation performance and secondary pollution caused by the inter-particle agglomeration, metal ion leaching, and difficult recovery of nano metal catalysts. Analysis techniques such as SEM, TEM, XRD, BET, FTIR, VSM, TGA, and Raman spectroscopy indicated that the prepared nanocomposites have excellent surface properties, structural stability, and magnetic properties. The performance of nano-CoFe₂O₄@MC for Congo red (CR) degradation was evaluated by comparison with other treatment systems and study of the influence of experimental parameters, including the anchoring ratios, catalyst dosage, PMS concentration, initial pH, CR concentration, coexisting anions, and humic acid. Both radical and nonradical pathways were observed in the activation process of PMS by nano-CoFe₂O₄@MC. The analysis results of the element composition and ionic state of the catalyst show that the redox cycle of two ion pairs, Co³⁺/Co²⁺ and Fe²⁺/Fe³⁺, could enhance the multipath electron transfer on the catalyst surface to promote the generation of reactive oxygen species. Identification of the intermediate products revealed CR was transformed into 12 intermediates through two branch pathways in the nano-CoFe₂O₄@MC/PMS system. After five cycles of use, the catalytic efficiency of the catalyst did not decrease significantly. Nanocomposites with high catalytic performance, stability, recyclability, and a low ion leaching rate have broad application prospects in the treatment of antibiotic wastewater.

Activation of Peroxymonosulfate Using Spent Li-Ion Batteries for the Efficient Degradation of Chloroquine Phosphate

Recycling and reusing spent lithium-ion batteries (LIBs) have gained a lot of attention in recent years, both ecologically and commercially. The carbon nanotube-loaded CoFe2O4 (CoFe2O4@CNTs) composite was made using a solvothermal technique utilizing wasted LIBs as the starting material and carbon nanotubes as support, and it was used as an efficient peroxymonosulfate (PMS, HSO5−) activator to degrade chloroquine phosphate (CQP). Scanning electron microscopy (SEM), transmission electron microscopy (TEM), an energy dispersive spectrometer (EDS), X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET), and X-ray photoelectron spectroscopy (XPS) were utilized to characterize the physical and chemical properties of the catalyst generated. The impacts of CoFe2O4@CNTs dosage, PMS concentration, reaction temperature, initial pH value, starting CQP concentration, and co-existing ions have undergone extensive experimental testing. In comparison to bare CoFe2O4, the CoFe2O4@CNTs demonstrated increased catalytic activity, which might be attributed to their super electron transport capacity and large surface area. In ideal conditions, the mineralization efficiency and removal efficiency of 10 mg/L CQP approached 33 and 98.7%, respectively. By employing external magnets, the CoFe2O4@CNTs catalyst may be simply recycled and reused several times. The potential reaction mechanism in the CoFe2O4@CNTs/PMS system was also investigated. In summary, this study indicates that CoFe2O4@CNTs generated from spent lithium-ion batteries have a high potential in PMS activation for CQP and other pollutant degradation.

Degradation of 1,2,3-trichloropropane by unactivated persulfate and the implications for groundwater remediation

Persulfate (PS) is widely used as an in situ chemical oxidation (ISCO) technology for groundwater and soil remediation. While conventional theory generally assumes that PS needs to be "activated" to produce reactive radicals for pollutant degradation, herein, PS without explicit activation system was discovered for the degradation of 1,2,3-TCP with the generation of reactive oxidation species (ROS). Comparison of five common ISCO oxidants (PS, peroxymonosulfate, hydrogen peroxide, potassium permanganate, and sodium percarbonate) indicated that only unactivated PS was able to degrade 1,2,3-TCP in both pure water and 12 natural water samples. 50 μM 1,2,3-TCP degradation can be continued as long as there is enough PS (50 mM). The degradation rate of 1,2,3-TCP increased 450 % when the PS concentration increased from 10 mM to 50 mM and 500 % when the temperature increased from 25 °C to 45 °C. Electron paramagnetic resonance (EPR) analyzes, hydroxyl radicals (·OH) probe reaction and radical quenching experiments confirmed the involvement of both sulfate radicals (SO₄·-) and ·OH that were responsible for 1,2,3-TCP degradation and ·OH played a more important role. HCO₃^-, Cl^- and NOM are three groundwater matrix species that are most likely to inhibit PS oxidation of 1,2,3-TCP. Compared to activated PS, unactivated PS is more promising and more practical for groundwater remediation, since it has several advantages: (1) longer lifetime and better long-term availability; (2) ability of enduring contaminant degradation; (3) applicable for low-permeability zones remediation and potential to alleviate contaminant rebound or tailing problems; (4) environmental friendly; and (5) lower cost. Overall, results of this study show that unactivated PS is a promising in situ remediation technology that may be a good candidate for the most challenging low permeable zone remediation.

A nanozyme-like colorimetric sensing strategy based on persulfate activation on Co-based metal-organic frameworks

A nanozyme-like colorimetric sensing strategy based on persulfate activation on Co-based metal-organic frameworks is developed for biomolecule detection in solution and on paper strips. By switching from H₂O₂ activation on nanozymes to catalytic persulfate activation, this general strategy provides higher sensitivity, faster speed, and wider application ranges for detection.

Catalyst-Free Photochemical Activation of Peroxymonosulfate in Xanthene-Rich Systems for Fenton-Like Synergistic Decontamination: Efficacy of Proton Transfer Process

Catalyst-free visible light assisted Fenton-like catalysis offers opportunities to achieve the sustainable water decontamination, but the synergistic decontamination mechanisms are still unclear, especially the effect of proton transfer process (PTP). The conversion of peroxymonosulfate (PMS) in photosensitive dye-enriched system was detailed. The photo-electron transfer between excited dye and PMS triggered the efficient activation of PMS and enhanced the production of reactive species. Photochemistry behavior analysis and DFT calculations revealed that PTP was the crucial factor to determine the decontamination performance, leading to the transformation of dye molecules. The excitation process inducing activation of whole system was composed of low energy excitations, and the electrons and holes were almost contributed by LUMO and HOMO. This work provided new ideas for the design of catalyst-free sustainable system for efficient decontamination.

Density Functional Theory and Machine Learning-Based Quantitative Structure-Activity Relationship Models Enabling Prediction of Contaminant Degradation Performance with Heterogeneous Peroxymonosulfate Treatments

Heterogeneous peroxymonosulfate (PMS) treatment is recognized as an effective advanced oxidation process (AOP) for the treatment of organic contaminants. Quantitative structure-activity relationship (QSAR) models have been applied to predict the oxidation reaction rates of contaminants in homogeneous PMS treatment systems but are seldom applied in heterogeneous treatment systems. Herein, we established QSAR models updated with density functional theory (DFT) and machine learning approaches to predict the degradation performance for a series of contaminants in heterogeneous PMS systems. We imported the characteristics of organic molecules calculated using constrained DFT as input descriptors and predicted the apparent degradation rate constants of contaminants as the output. The genetic algorithm and deep neural networks were used to improve the predictive accuracy. The qualitative and quantitative results from the QSAR model for the degradation of contaminants can be used to select the most appropriate treatment system. A strategy for selection of the optimum catalyst for PMS treatment of specific contaminants was also established according to the QSAR models. This work not only increases our understanding of contaminant degradation in PMS treatment systems but also highlights a novel QSAR model to predict the degradation performance in complicated heterogeneous AOPs.

Regeneration of methylene blue-saturated biochar by synergistic effect of H2O2 desorption and peroxymonosulfate degradation

Biochar, as an adsorbent, is widely used for the removal of organic pollutants in water body. Hence, after saturated adsorption, regeneration treatment is required to recover the adsorption performance of biochar. In this study, a biochar (P-GBC) prepared by phosphoric acid activation showed high adsorption capacity for methylene blue (MB) with the maximum adsorption capacity (Q_m) of 599.66 mg/g. Then, regeneration treatments using 4 mM peroxymonosulfate (PMS), 0.2 M hydrogen peroxide (H₂O₂) and their mixture were used to regenerate MB-saturated biochar with regeneration efficiencies of 58.24%, 66.01% and 94.88%, respectively. Combining with degradation and quenching experiments, it is found that synergistic effect of H₂O₂ desorption and PMS degradation is responsible for the enhancement of regeneration efficiency of P-GBC in H₂O₂-PMS system and enables a high mineralization rate of 82.68% for the MB adsorbed on P-GBC. Furthermore, EPR tests indicate that singlet oxygen (¹O₂) is assigned as the primary activate species for the degradation of MB and XPS analyses confirm that graphite nitrogen and carbonyl on P-GBC are the main active sites for the activation of PMS. Compared with conventional regenerants, H₂O₂-PMS system has the advantages of low dosage, high mineralization efficiency, and easy accessibility, and is also effective, sustainable and environmentally friendly for the regeneration of organic pollutants-saturated biochar.

Hexagon AgNCs/PVP Crystallization Induced Cathode Electrochemiluminescence Enhancement for miRNA221 Biosensing

Aggredation-induced electrochemiluminescence (AIECL) promises an efficient strategy for synthesize highly luminescent emitter and co-reactant for ECL analysis, however, rational control of electrogenerated emission intensity is still challenging. The low electroconductivity and amorphous molecular configuration are intrinsic bottleneck. This work reveals the impact of polyvinyl pyrrolidone backbone regulated silver nanocrystallines (AgNCs/PVP) on the cathode AIECL properties in near infrared region, by employing the Box-Behnken designed response surface computation model to modulate crystal aggregates. Electron paramagnetic resonance spectroscopy discovered hydrogen radical (HO^• ) dominant reductive-oxidative (R-O) ECL mechanism with AgNCs acting as the co-reaction accelerator in graphene oxide/persulfate system (GO/S₂ O₈ ^2- ). Both theoretical calculation and experimental measurement testified that the ECL of AgNCs in GO/S₂ O₈ ^2- dependent on the concentration of in situ electrochemical oxidized Ag⁺ . The high efficiency of crystallization-induced enhanced ECL (CIECL) originates from 1) the effective electron transfer of Ag⁺ accelerated HO^• produce to notable promote radioactive transition, and 2) twisted intramolecular charge transfer from the electron-rich donor of PVP to electron-deficient receptor of Ag⁰ to restrict nonradioactive transition. The AgNCs/PVP with CIECL effect are applied to construct an ultrasensitive platform for miR-221 assay with a lower detection limit of 7.47 × 10³  copies mL^-1 than typical qPCR method.

Pretreatment of membrane dye wastewater by CoFe-LDH-activated peroxymonosulfate: Performance, degradation pathway, and mechanism

When a membrane is used to treat dye wastewater, dye molecules are continually concentrated at the membrane surface over time, resulting in a dramatic decrease in membrane flux. Aside from routine membrane cleaning, the pretreatment of dye wastewater to degrade organic pollutants into tiny molecules is a facile solution to the problem. In this study, the use of layered double hydroxide (LDH) to activate peroxymonosulfate (PMS) for efficient degradation of organic pollutant has been thoroughly investigated. We utilized a simple two-drop co-precipitation process to prepare CoFe-LDH. The transition metal components in CoFe-LDH effectively activate PMS to create oxidative free radicals, and the layered structure of LDH increases the number of active sites, and thereby considerably enhancing the reaction rate. It was found that the reaction process produced non-free and free radicals, including singlet oxygen (¹O₂), sulfate radicals (SO₄^•-), and hydroxyl radicals (•OH), with ¹O₂ being the dominant reactive species. Under the optimal conditions (pH 6.7, PMS dosage 0.2 g/L, catalyst loading 0.1 g/L), the degradation of Acid Red 27 dye in the CoFe-LDH/PMS system reached 96.7% within 15 min at an initial concentration of 200 mg/L. The CoFe-LDH/PMS system also exhibited strong resistance to inorganic ions and pH during the degradation of organic pollutants. This study presents a novel strategy for the synergistic treatment of dye wastewater with free and non-free radicals produced by LDH-activated PMS in a natural environment.

Efficient wastewater disinfection by raised 1O2 yield through enhanced electron transfer and intersystem crossing via photocatalysis of peroxymonosulfate with CuS quantum dots modified MIL-101(Fe)

Peroxymonosulfate (PMS)-based photocatalysis is a promising alternative approach for wastewater disinfection. Singlet oxygen (¹O₂) is sensitive and efficient for bacterial inactivation. This study developed a ¹O₂-predominated PMS disinfection technique under visible light with CuS quantum dots (QDs) modified MIL-101(Fe) (CSQDs@MF). CuS QDs modification greatly enhanced the ¹O₂ quantum yield by 80% than that of MIL-101(Fe). Photoelectricity and photoluminescence tests demonstrated that both the enhanced electron transfer and energy transfer were responsible for improved ¹O₂ generation in Vis/PMS/CSQDs@MF system. The system took 60 min to inactivate 7.5-log E. coli, and it could be applied in a broad pH and dissolve oxygen range. Bacterial inactivation mechanism suggested that ¹O₂ attacked cell membrane first, then induced oxidative stress, up-regulated intracellular ROS level, eventually broke DNA strand. The system showed good disinfection performance on Gram-positive B. subtilis and fecal coliforms in practical wastewater, implying it is a promising alternative disinfection technology for wastewater treatment.

Sulfate radicals-based advanced oxidation processes for the degradation of pharmaceuticals and personal care products: A review on relevant activation mechanisms, performance, and perspectives

Owing to the rapid development of modern industry, a greater number of organic pollutants are discharged into the water matrices. In recent decades, research efforts have focused on developing more effective technologies for the remediation of water containing pharmaceuticals and personal care products (PPCPs). Recently, sulfate radicals-based advanced oxidation processes (SR-AOPs) have been extensively used due to their high oxidizing potential, and effectiveness compared with other AOPs in PPCPs remediation. The present review provides a comprehensive assessment of the different methods such as heat, ultraviolet (UV) light, photo-generated electrons, ultrasound (US), electrochemical, carbon nanomaterials, homogeneous, and heterogeneous catalysts for activating peroxymonosulfate (PMS) and peroxydisulfate (PDS). In addition, possible activation mechanisms from the point of radical and non-radical pathways are discussed. Then, biodegradability enhancement and toxicity reduction are highlighted. Comparison with other AOPs and treatment of PPCPs by the integrated process are evaluated as well. Lastly, conclusions and future perspectives on this research topic are elaborated.

Improvement of Carbonyl Groups and Surface Defects in Carbon Nanotubes to Activate Peroxydisulfate for Tetracycline Degradation

Carbon nanotubes (CNTs) were considered a promising activator for persulfates due to their high electrical conductivity, large specific surface area and low toxicity. The functional groups and surface defects of CNTs could significantly affect their activation performance. In this study, CNTs with high C=O ratio and defect density (CNT-O-H) were prepared through a facile treatment of raw CNTs with HNO₃ oxidation followed by calcination at 800 °C under an argon atmosphere. X-ray photoelectron spectroscopy (XPS) and Raman results showed that the C=O proportion and defect degree (I_D/I_G) rose to 75% and 1.53, respectively. The obtained CNT-O-H possessed a superior performance towards peroxydisulfate (PDS) activation, and the degradation efficiency of tetracycline (TC) in the CNT-O-H/PDS system was increased to 75.2% from 56.2% of the raw CNTs/PDS system within 40 min. Moreover, the activity of CNT-O-H after use could be easily recovered with re-calcination. In addition, the CNT-O-H/PDS system exhibited high adaptabilities towards wide solution pH (2-10), common coexisting substances and diverse organic pollutants. Singlet oxygen (¹O₂) was confirmed to be the dominant reactive oxygen species (ROS) generated in the CNT-O-H/PDS system. It was inferred that surface C=O groups and defects of CNTs were the key site to activate PDS for TC degradation.

The efficient degradation of diclofenac by ferrate and peroxymonosulfate: performances, mechanisms, and toxicity assessment

In this study, the degradation efficiency and reaction mechanisms of diclofenac (DCF), a nonsteroidal anti-inflammatory drug, by the combination of ferrate (Fe(VI) and peroxymonosulfate (PMS) (Fe(VI)/PMS) were systematically investigated. The higher degradation efficiency of DCF in Fe(VI)/PMS system can be obtained than that in alone persulfate (PS), Fe(VI), PMS, or the Fe(VI)/PS process at pH 6.0. DCF was efficiently removed in Fe(VI)/PMS process within a wide range of pH values from 4.0 to 8.0, with higher degradation efficiency in acidic conditions. The increasing reaction temperature (10 to 30 ℃), Fe(VI) dose (6.25 to 100 µM), or PMS concentration (50 to 1000 µM) significantly enhanced the DCF degradation. The existences of HCO₃¯, Cl¯, and humic acid (HA) obviously inhibited the DCF removal. Electron paramagnetic resonance (EPR), free radical quenching, and probing experiments confirmed the existence of sulfate radicals (SO₄^•¯), hydroxyl radicals (^•OH), and Fe(V)/ Fe(IV), which are responsible for DCF degradation in Fe(VI)/PMS system. The variations of TOC removal ratio reveal that the adsorption of organics with ferric particles, formed in the reduction of Fe(VI), also were functioned in the removal process. Sixteen DCF transformation byproducts were identified by UPLC-QTOF/MS, and the toxicity variation was evaluated. Consequently, eight reaction pathways for DCF degradation were proposed. This study provides theoretical basis for the utilization of Fe(VI)/PMS process.

Pyrolysis temperature-switchable Fe-N sites in pharmaceutical sludge biochar toward peroxymonosulfate activation for efficient pollutants degradation

Pyrolysis of pharmaceutical sludge (PS) is a promising way of safe disposal and to recover energy and resources from waste. The resulting PS biochar (PSBC) is often used as adsorbent, but has seldom been explored as catalyst. Herein we demonstrate that PSBC (0.4 g/L) could efficiently activate peroxymonosulfate (PMS) to 100% degrade 4-chlorophenol (4-CP) with rate constants of 0.42-1.70 min^-1, outperforming other reported catalysts. Interestingly, the PMS activation pathway highly depended on PSBC pyrolysis temperature, which produced dominantly high-valent iron species (e.g., Fe^IVO²⁺) at low temperature but more sulfate radical (SO₄^·-) and hydroxyl radical (·OH) at higher temperature, e.g., 0.17, 0.23, 0.12 mmol/L of Fe^IVO²⁺ and 0.009, 0.038, 0.102 mmol/L of SO₄^·-/·OH were produced within 10 min by PSBC-600/PMS, PSBC-800/PMS, and PSBC-1000/PMS, respectively. Characterization, density functional theory (DFT) simulation and Pearson correlation analysis revealed that along with the increase of pyrolysis temperatures, the active sites of PSBC gradually shifted from atomically dispersed N-coordinated Fe moieties (FeN_x) to iron nitrides (Fe_xN), which activated PMS to produce Fe^IVO²⁺ and SO₄^·-/·OH, respectively. This study clarifies the structure-activity relationships of PSBC for PMS activation, and opens a new avenue for the treatment and utilization of PS as high value-added resources.

Low-Temperature Reduction Synthesis of γ-Fe2O3-x@biochar Catalysts and Their Combining with Peroxymonosulfate for Quinclorac Degradation

Biochar loading mixed-phase iron oxide shows great advantages as a promising catalyst owing to its eco-friendliness and low cost. Here, γ-Fe₂O_3-x@biochar (E/Fe-N-BC) composite was successfully prepared by the sol-gel method combined with low-temperature (280 °C) reduction. The Scanning Electron Microscope (SEM) result indicated that γ-Fe₂O_3-x particles with the size of approximately 200 nm were well-dispersed on the surface of biochar. The CO derived from biomass pyrolysis is the main reducing component for the generation of Fe (II). The high content of Fe (II) contributed to the excellent catalytic performance of E/Fe-N-BC for quinclorac (QNC) degradation in the presence of peroxymonosulfate (PMS). The removal efficiency of 10 mg/L of QNC was 100% within 30 min using 0.3 g/L γ-Fe₂O_3-x@biochar catalyst and 0.8 mM PMS. The radical quenching experiments and electron paramagnetic resonance analysis confirmed that •OH and SO₄•^- were the main radicals during the degradation of QNC. The facile and easily mass-production of γ-Fe₂O_3-x@biochar with high catalytic activity make it a promising catalyst to activate PMS for the removal of organic pollutants.

Mechanism and efficiency of photocatalytic triclosan degradation by TiO2/BiFeO3 nanomaterials

Hierarchical porous TiO₂ photocatalytic nanomaterials were fabricated by impregnation and calcination using a peanut shell biotemplate, and TiO₂/BiFeO₃ composite nanomaterials with different doping amounts were fabricated using hydrothermal synthesis. The micromorphology, structure, element composition and valence state of the photocatalyst were analyzed using a series of characterization methods, including X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM), BET surface area (BET), X-ray photoelectron spectroscopy (XPS), UV-visible diffuse reflectance (UV-vis), fluorescence spectroscopy (PL) and other technological means. Finally, the degradation mechanism and efficiency of BiFeO₃ composite photocatalyst on the target pollutant triclosan were analyzed using a xenon lamp to simulate sunlight. The results showed that TiO₂/BiFeO₃ catalyst fabricated using a peanut shell biotemplate has a specific surface area of 153.64 m²/g, a band gap of 1.92 eV, and forms heterostructures. The optimum doping amount of TiO₂/BiFeO₃ catalyst was 1 mol/mol, and the degradation rate was 81.2%. The main active substances degraded were ·O₂^-and ·OH. The degradation process measured is consistent with the pseudo-first-order kinetic model.

Medium-high frequency sonication dominates spherical-SiO2 nanoparticle size

Spherical SiO₂ nanoparticles (SSNs) have been inventively synthesized using the Stöber method with sonication at medium-high frequencies (80, 120, and 500 kHz), aiming to control SSN size and shorten reaction time. Compared to the conventional method, such sonication allowed the Stöber reaction complete in 20-60 min with a low molar ratio of NH₄OH/tetraethyl orthosilicate (0.84). The hydrodynamic diameters of 63-117 nm of SSNs were obtained under sonication with 80, 120, and 500 kHz of ultrasonic frequencies. Moreover, the SSNs obtained were smaller at 120 kHz than at 80 kHz in a multi-frequencies ultrasonic reactor, and the SSN size decreased with increasing ultrasonic power at 20 °C, designating the sonochemical unique character, namely, the SSN-size control is associated with the number of microbubbles originated by sonication. With another 500 kHz ultrasonic bath, the optimal system temperature for producing smaller SSNs was proven to be 20 °C. Also, the SSN size decreased with increasing ultrasonic power. The smallest SSNs (63 nm, hydrodynamic diameter by QELS, or 21 nm by FESEM) were obtained by sonication at 207 W for 20 min at 20 °C. Furthermore, the SSN size increased slightly with increasing sonication time and volume, favoring the scale-up of SSNs preparation. The mechanisms of controlling the SSN size were further discussed by the radical's role and effects of ammonia and ethanol concentration.

Combined ultrasound cavitation and persulfate for the treatment of pharmaceutical wastewater

In recent years industrialization has caused magnificent leaps in the high profitable growth of pharmaceutical industries, and simultaneously given rise to environmental pollution. Pharmaceutical processes like extraction, purification, formulation, etc., generate a large volume of wastewater that contains high chemical oxygen demand (COD), biological oxygen demand, auxiliary chemicals, and different pharmaceutical substances or their metabolites in their active or inactive form. Its metabolites impart non-biodegradable toxic pollutants as a byproduct and intense color, which increases ecotoxicity into the water, thus this requires proper treatment before being discharged. This study focuses on the feasibility analysis of the utilization of ultrasound cavitation (20 kHz frequency) together with a persulfate oxidation approach for the treatment of complex pharmaceutical effluent. Process parameters like pH, amplitude intensity, oxidant dosage were optimized for COD removal applying response surface methodology-based Box-Behnken design. The optimum value observed for pH, amplitude intensity and oxidant dosage are 5, 20% and 100 mg/L respectively with 39.5% removal of COD in 60 min of fixed processing time. This study confirms that a combination of ultrasound cavitation and persulfate is a viable option for the treatment of pharmaceutical wastewater and can be used as an intensification technology in existing effluent treatment plants to achieve the highest amount of COD removal.

Purification Technologies for NOx Removal from Flue Gas: A Review

Nitrogen oxide (NOx) is a major gaseous pollutant in flue gases from power plants, industrial processes, and waste incineration that can have adverse impacts on the environment and human health. Many denitrification (de-NOx) technologies have been developed to reduce NOx emissions in the past several decades. This paper provides a review of the recent literature on NOx post-combustion purification methods with different reagents. From the perspective of changes in the valence of nitrogen (N), purification technologies against NOx in flue gas are classified into three approaches: oxidation, reduction, and adsorption/absorption. The removal processes, mechanisms, and influencing factors of each method are systematically reviewed. In addition, the main challenges and potential breakthroughs of each method are discussed in detail and possible directions for future research activities are proposed. This review provides a fundamental and systematic understanding of the mechanisms of denitrification from flue gas and can help researchers select high-performance and cost-effective methods.

Modulating cobalt-iron electron transfer via encapsulated structure for enhanced catalytic activity in photo-peroxymonosulfate coupling system

In recent years, many efforts have been made to modulate the interaction between carriers and nanoparticles under the integrity of the active site structure. Herein, SrFeO₃ @CoSe₂ nanocomposite was fabricated by loading CoSe₂ onto SrFeO₃ particles with a perovskite structure in the form of an encapsulation. The optimized SFO@CS-0.3 catalyst exhibited high catalytic activity in photo-peroxymonosulfate-based reaction and the catalyst was structurally stable over a wide temperature range. Characterization and theoretical results demonstrated that the charge in the SrFeO₃ was transferred from Fe to Co cation of the CoSe₂ via the interfacial oxygen atom. Moreover, the newly established oxygen-metal structure (Fe-O_v-Co) acted as a catalytic site, accelerating the cleavage of the peroxymonosulfate bond to generate radicals, which were desorbed into solution to attack the contaminant. Simultaneously, the heterojunction constructed by the catalyst underwent internal electron transfer under visible light, creating a field in which multiple reactive oxygen species co-oxidized organic contaminant.

Peroxide stabilizers remarkably increase the longevity of thermally activated peroxydisulfate for enhanced ISCO remediation

Thermally activated peroxydisulfate In Situ Chemical Oxidation (TAP-ISCO) is often applied for the remediation of soil-sorbed hydrophobic organic contaminants (HOCs) and nonaqueous phase liquids (NAPLs), which act as long-term sources of groundwater contamination. TAP-ISCO benefits from improved desorption/dissolution of organic contaminants into the aqueous phase and efficient activation of peroxydisulfate at elevated temperatures, but the primary limitation of TAP-ISCO is the short lifetime of peroxydisulfate (therefore the availability of reactive radical species). To resolve this problem, coupling of peroxide stabilizers with TAP were tested. The compatibility of seven representative commercial organic and inorganic peroxide stabilizers, including sodium stannate, trisodium phosphate, sodium pyrophosphate, sodium silicate, sodium citrate, ethylene diamine tetra methylene phosphonic acid and ethylenediaminetetraacetic acid disodium salt, with TAP in aqueous solutions and solutions containing goethite or soil particles were first studied. The effects of stabilizers on the formation, distribution and reactivity of reactive oxygen species were then investigated through electron paramagnetic resonance (EPR) spin-trapping experiments using 5,5-dimethyl-1-pyrroline-N-oxide, chemical probe experiments using anisole, nitrobenzene and hexachloroethane, and biphasic trichloroethylene (TCE) dense nonaqueous phase liquids (DNAPLs) TAP-ISCO mimicking experiments. The results indicate that organic stabilizers significantly accelerate peroxydisulfate decomposition at both ambient and elevated temperatures. In contrast, inorganic stabilizers can markedly increase peroxydisulfate longevity by suppressing the acid-catalyzed peroxydisulfate decomposition, quenching radical-chain acceleration, and sequestering transition metal species. In addition, TAP systems containing inorganic stabilizers can effectively generate a variety of reactive radical species, including SO₄^•-, HO^•, and O₂^•-, and improve the oxidation of anisole and nitrobenzene, though suppressing the reduction of hexachloroethane to some extent. Especially, suitable inorganic stabilizers (e.g., trisodium phosphate) can effectively improve TAP oxidation of TCE DNAPL while suppressing peroxydisulfate decomposition. Overall, this study provides the fundamental basis of coupling TAP-ISCO with peroxide stabilizers.

Effective Electro-Activation Process of Hydrogen Peroxide/Peroxydisulfate Induced by Atomic Hydrogen for Rapid Oxidation of Norfloxacin over the Carbon-Based Pd Nanocatalyst

Peroxydisulfate (PDS) can be activated by electrochemistry, for which using atom H* as an activator is feasibly favorable in theoretical and experimental applications. Studies have shown that atomic H* can cleave the peroxide bond as a single-electron reducing agent in Na₂S₂O₈ to generate SO₄^•-, thus achieving the degradation of pollutants. Herein, Pd nanoparticles synthesized by in an in situ solution were dispersed in carbon black and then loaded on carbon felt, called Pd/C@CF, as the cathode for peroxydisulfate activation. This showed an ideal degradation effect on a small electrode (10 mm × 10 mm). Cyclic voltammetry (CV) and linear sweep voltammetry (LSV) tests were taken to verify the significant increase in the yield of the reduction of Na₂S₂O₈ by H*. The degradation experiments and free-radical scavenging experiment confirmed that the atomic H* was the dominant component triggering the activation of PDS to generate SO₄^•-. A Pd/C@CF composite electrodes have low pH dependence, high stability and recyclability, etc., which has many potential practical applications in wastewater treatment. In addition, H* can also reduce H₂O₂ to •OH by breaking the peroxide bond, so the removal of pollutants by the same amount of H₂O₂ and Na₂S₂O₈ under the same conditions is compared, and their application prospects are analyzed and compared.

Efficient chlorinated alkanes degradation in soil by combining alkali hydrolysis with thermally activated persulfate

Alkali activation is the most commonly used activation method for persulfate (PS) in in-situ remediation. However, the role of alkali in pollutant degradation is still elusive, limiting the optimization of relevant remediation strategies. In this study, we found that chlorinated alkanes (e.g., tetrachloroethane (TeCA)) could be efficiently degraded by thermal-alkali activation of PS. The main role of alkali was not activating PS but hydrolyzing the chlorinated alkanes, which was evidenced by the immediate conversion of TeCA into trichloroethylene (TCE) with NaOH and PS or with sole NaOH solution. Electron paramagnetic resonance analysis also showed that with a high NaOH/PS molar ratio (4:1) the intensity of oxidative radicals decreased, implying that high levels of alkali did not favor the formation of free radicals. Interestingly, better degradation of TeCA and its product TCE was observed by the combination of alkaline hydrolysis and thermal activation of PS (where alkali was added 6 h before PS rather than simultaneously) in comparison to thermal-alkali activation of PS. This study provides new insights into the remediation of chlorinated alkane-contaminated soils by in-situ chemical oxidation.

Multimetallic CuCoNi Oxide Nanowires In Situ Grown on a Nickel Foam Substrate Catalyze Persulfate Activation via Mediating Electron Transfer

In situ growth of nanostructures on substrates is a strategy for designing highly efficient catalytic materials. Herein, multimetallic CuCoNi oxide nanowires are synthesized in situ on a three-dimensional nickel foam (NF) substrate (CuCoNi-NF) by a hydrothermal method and applied to peroxydisulfate (PDS) activation as immobilized catalysts. The catalytic performance of CuCoNi-NF is evaluated through the degradation of organic pollutants such as bisphenol A (BPA) and practical wastewater. The results indicate that the NF not only plays an important role as the substrate support but also serves as an internal Ni source for material fabrication. CuCoNi-NF exhibits high activity and stability during PDS activation as it mediates electron transfer from BPA to PDS. CuCoNi-NF first donates electrons to PDS to arrive at an oxidized state and subsequently deprives electrons from BPA to return to the initial state. CuCoNi-NF maintains high catalytic activity in the pH range of 5.2-9.2, adapts to a high ionic strength up to 100 mM, and resists background HCO₃^- and humic acid. Meanwhile, 76.6% of the total organic carbon can be removed from packaging wastewater by CuCoNi-NF-catalyzed PDS activation. This immobilized catalyst shows promising potential in wastewater treatment, well addressing the separation and recovery of conventional powdered catalysts.