Time-Resolved Measurements of Nitric Oxide, Nitrogen Dioxide, and Nitrous Acid in an Occupied New York Home

Formation of Nitrosamines from the Heterogeneous Reaction of Nitrous Acid and Organic Amines in Indoor Environments

Carcinogenic nitrosamines have been widely studied due to their risk to human health. However, the universality and evolutionary processes of their generation, particularly concerning their secondary sources, remain unclear at present. We demonstrated through laboratory flow tube experiments that corresponding nitrosamines were generated from heterogeneous reactions of nitrous acid (HONO) with five structurally diverse amines commonly found indoors, including diphenylamine (DPhA), dibenzylamine (DBzA), dioctylamine (DOtA), N-(1,3-dimethylbutyl)-N'-phenyl-p-phenylenediamine (6PPD), and N-phenyl-1-naphthylamine (PANA). The heterogeneous reaction rate constants of DBzA and DOtA with HONO (∼70 ppb) were 1.21 × 10-3 and 2.13 × 10-3 min-1 at 30% relative humidity (RH), resulting in a lifetime of 13.8 and 7.8 h. As compared to higher RH (∼80%), more nitrosamines were produced from the reaction of HONO with surface-sorbed DBzA, DOtA, 6PPD, and PANA at lower RH (30%), with product yields ranging from <0.1% to 0.5%. Furthermore, we observed the formation of nitroso-6PPDs and nitro-6PPDs during room air exposure of 6PPD in a genuine indoor environment, in addition to various other transformation products indicative of reactions of 6PPD with HONO, NOx, and ozone indoors. This study confirmed the universality of the heterogeneous reaction of surface-sorbed amine with HONO as a source of nitrosamines indoors.

Unveiling 3-D evolution and mechanisms of ozone pollution in Changzhou, China: Insights from lidar observations and modelling

Ground ozone (O3) pollution has emerged as a prominent environmental concern in eastern cities of China, particularly during the summer and autumn seasons. However, a comprehensive investigation into the three-dimensional (3-D) evolution characteristics of O3 within complicated urban environments, especially in lake-land environment, is notably scarce. To enhance our understanding of the mechanisms underlying elevated O3 concentrations within a 3-D scale, this study employed an ozone lidar to delineate vertical ozone profiles in Changzhou, a typical city in China with complicated anthropogenic and biogenic emissions and complex land cover. The process analysis tool integrated into the Weather Research and Forecasting with Chemistry (WRF-Chem) model was further utilized to analyze the formation processes of O3. The results unveil a persistent O3 pollution episode lasting over 15 days in Changzhou during the study period, with multiple peaks exceeding 200 μg m⁻³. Notably, O3 predominantly accumulated within the boundary layer, confined below 1.2 km. Both ground and vertical contributions to this pollution were mainly due to local chemical reactions, with a maximum near-surface contribution reaching 19 ppb h-1 and a vertical contribution of 10 ppb h-1 at the height of 900 ± 200 m. Furthermore, episodes of the enhanced O3 concentrations on August 9 and August 26, 2021, were influenced by external advection process. Our study also found that local circulation plays an important role in the accumulation of surface O3 during certain periods. There was a temperature difference between the surface of Lake Tai and the adjacent land, resulting in the formation of lake-land breezes that facilitate the transport of O3 from the lake surface to the terrestrial environment during pollution events. Our study emphasizes the necessity of reducing local pollutant emissions and implementing joint emission controls as the primary strategies for mitigating O3 pollution in Changzhou and the surrounding region.

Oxidant concentrations and photochemistry in a vehicle cabin

Indoor air quality (IAQ) in vehicles can be important to people's health, especially for those whose occupations require them to spend extensive time in vehicles. To date, research on vehicle IAQ has primarily focused on direct emissions as opposed to chemistry happening in vehicle cabins. In this work, we conducted time-resolved measurements of the oxidants and oxidant precursors ozone (O3), nitric oxide (NO), nitrogen dioxide (NO2), and nitrous acid (HONO) inside the cabin of a 2012 Toyota Rav4 under varying ventilation conditions (i.e., car off, car on with passive ventilation, car on with mechanical ventilation via the recirculating fan, and car on with mechanical ventilation via the direct fan). Ozone levels inside the vehicle were significantly lower than outdoors under most conditions, and were approximately half the outdoor levels when the direct fan was in operation. Nitric oxide and NO2 concentrations were very low both inside the vehicle and outdoors. Nitrous acid levels in the vehicle were lower than reported values in other indoor environments, though much higher than expected outdoor levels. We also investigated the potential for photochemical production of radicals in the vehicle. Time- and wavelength-resolved solar irradiance spectra were collected, and steady state hydroxyl radical (OH) and nitrate radical (NO3) concentrations were calculated. Steady state OH concentrations were predicted to be similar to those in air masses in residences illuminated by sunlight, suggesting the importance of HONO photolysis in vehicles. Conversely, nitrate radicals (NO3) were not considered significant indoor oxidants in our study due to rapid titration by NO. Overall, our findings emphasize the importance of both air exchange and photochemistry in shaping the composition of air inside vehicles.

A review of indoor nitrous acid (HONO) pollution: Measurement techniques, pollution characteristics, sources, and sinks

Indoor air quality is of major concern for human health and well-being. Nitrous acid (HONO) is an emerging indoor pollutant, and its indoor mixing ratios are usually higher than outdoor levels, ranging from a few to tens of parts per billion (ppb). HONO exhibits adverse effects to human health due to its respiratory toxicity and mutagenicity. Additionally, HONO can easily undergo photodissociation by ultraviolet light to produce hydroxyl radicals (OH•), which in turn trigger a series of further photochemical oxidation reactions of primary or secondary pollutants. The accumulation of indoor HONO can be attributed to both direct emissions from combustion sources, such as cooking, and secondary formation resulting from enhanced heterogeneous reactions of NOx on indoor surfaces. During the day, the primary sink of indoor HONO is photolysis to OH• and NO. Moreover, adsorption and/or reaction on indoor surfaces, and diffusion to the outside atmosphere contribute to HONO loss both during the day and at night. The level of indoor HONO is also affected by human occupancy, which can influence household factors such as temperature, humidity, light irradiation, and indoor surfaces. This comprehensive review article summarized the research progress on indoor HONO pollution based on indoor air measurements, laboratory studies, and model simulations. The environmental and health effects were highlighted, measurement techniques were summarized, pollution levels, sources and sinks, and household influencing factors were discussed, and the prospects in the future were proposed.

Unveiling the effect of O2 on the photochemical reaction of NO2 with polycyclic aromatic hydrocarbons

The photochemical reaction of NO2 with organics may be a source of atmospheric HONO during the daytime. Here, the conversion of NO2 to HONO on polycyclic aromatic hydrocarbons (PAHs) under solar irradiation under aerobic and anaerobic conditions was investigated using a flow tube reactor coupled to a NOx analyzer. O2 played an inhibition role in NO2 uptake and HONO formation on PAHs, as shown by 7%-45% and 15%-52% decrease in NO2 uptake coefficient (γ) and HONO yield (YHONO), respectively. The negative effect of O2 on the reaction between NO2 and PAHs should be attributed to three reasons. First, O2 could compete with NO2 for the available sites on PAHs. Second, the quenching of the triple excited state of PAHs (3PAHs*) by O2 inhibited the NO2 uptake. Third, NO3- formed under aerobic conditions reduced the conversion efficiency of NO2 to HONO. The environmental implications suggested that the NO2 uptake on PAHs could contribute to a HONO source strength of 10-120 ppt h-1 in the atmosphere.

Ventilation in a Residential Building Brings Outdoor NOx Indoors with Limited Implications for VOC Oxidation from NO3 Radicals

Energy-efficient residential building standards require the use of mechanical ventilation systems that replace indoor air with outdoor air. Transient outdoor pollution events can be transported indoors via the mechanical ventilation system and other outdoor air entry pathways and impact indoor air chemistry. In the spring of 2022, we observed elevated levels of NOx (NO + NO2) that originated outdoors, entering the National Institute of Standards and Technology (NIST) Net-Zero Energy Residential Test Facility through the mechanical ventilation system. Using measurements of NOx, ozone (O3), and volatile organic compounds (VOCs), we modeled the effect of the outdoor-to-indoor ventilation of NOx pollution on the production of nitrate radical (NO3), a potentially important indoor oxidant. We evaluated how VOC oxidation chemistry was affected by NO3 during NOx pollution events compared to background conditions. We found that nitric oxide (NO) pollution introduced indoors titrated O3 and inhibited the modeled production of NO3. NO ventilated indoors also likely ceased most gas-phase VOC oxidation chemistry during plume events. Only through the artificial introduction of O3 to the ventilation duct during a NOx pollution event (i.e., when O3 and NO2 concentrations were high relative to typical conditions) were we able to measure NO3-initiated VOC oxidation products, indicating that NO3 was impacting VOC oxidation chemistry.

A measurement and modelling investigation of the indoor air chemistry following cooking activities

Domestic cooking is a source of indoor air pollutants, including volatile organic compounds (VOCs), which can impact on indoor air quality. However, the real-time VOC emissions from cooking are not well characterised, and similarly, the resulting secondary chemistry is poorly understood. Here, selected-ion flow-tube mass spectrometry (SIFT-MS) was used to monitor the real-time VOC emissions during the cooking of a scripted chicken and vegetable stir-fry meal, in a room scale, semi-realistic environment. The VOC emissions were dominated by alcohols (70% of total emission), but also contained a range of aldehydes (14%) and terpenes (5%), largely attributable to the heating of oil and the preparation and heating of spices, respectively. The direct cooking-related VOC emissions were then simulated using the Indoor Chemical Model in Python (INCHEM-Py), to investigate the resulting secondary chemistry. Modelling revealed that VOC concentrations were dominated by direct emissions, with only a small contribution from secondary products, though the secondary species were longer lived than the directly emitted species. Following cooking, hydroxyl radical concentrations reduced by 86%, while organic peroxy radical levels increased by over 700%, later forming secondary organic nitrates, peroxyacylnitrates (PANs) and formaldehyde. Monoterpene emissions were shown to drive the formation of secondary formaldehyde, albeit to produce relatively modest concentrations (average of 60 ppt). Sensitivity analysis of the simulation conditions revealed that increasing the outdoor concentrations of ozone and NOx species (2.9× and 9×, respectively) resulted in the greatest increase in secondary product formation indoors (≈400%, 200% and 600% increase in organic nitrates, PANs and formaldehyde production, respectively). Given the fact that climate change is likely to result in increased ozone concentrations in the future, and that increased window-opening in response to rising temperatures is also likely, higher concentrations of indoor oxidants are likely in homes in the future. This work, therefore, suggests that cooking could be a more important source of secondary pollutants indoors in the future.

Cooking methods and kitchen ventilation availability, usage, perceived performance and potential in Canadian homes

BACKGROUND

Cooking is a substantial contributor to air pollutant exposures in many residences. Effective use of kitchen ventilation can mitigate exposure; however, information on its availability, usage, and potential to increase its use across the population has been limited.

OBJECTIVE

This study aimed to obtain nationally representative information on cooking methods, kitchen ventilation availability and usage, and the potential for education to increase effective usage.

METHODS

An online survey was sent to a representative sample of Canadian homes to collect data on cooking methods, the presence and use of mechanical kitchen ventilation devices, perceived device performance, and willingness to implement mitigation strategies. Responses were weighted to match key demographic factors and analyzed using non-parametric statistics.

RESULTS

Among the 4500 respondents, 90% had mechanical ventilation devices over the cooktop (66% of which were vented to the outside), and 30% reported regularly using their devices. Devices were used most often for deep-frying, followed by stir-frying, sautéing or pan-frying, indoor grilling, boiling or steaming. Almost half reported rarely or never using their ventilation devices during baking or oven self-cleaning. Only 10% were fully satisfied with their devices. More frequent use was associated with the device being vented to the outdoors, having more than two speed settings, quiet operation if only one speed, covering over half of the cooktop, and higher perceived effectiveness. After being informed of the benefits of kitchen ventilation, 64% indicated they would consider using their devices more often, preferentially using back burners with ventilation, and/or using higher ventilation device settings when needed.

IMPACT

This study provides population-representative data on the most used cooking methods, kitchen ventilation availability and usage, and influencing factors in Canadian homes. Such data are needed for exposure assessments and evaluating the potential to mitigate cooking-related pollutant exposures via more effective use of kitchen ventilation. The data can be reasonably extrapolated to the United States, given the similarities in residential construction practices and cultural norms between the two countries.

Hydrogen peroxide emissions from surface cleaning in a single-family residence

High levels of reactive chemicals may be emitted to the indoor air during household surface cleaning, leading to poorer air quality and potential health hazards. Hydrogen peroxide (H₂O₂)-based cleaners have gained popularity in recent years, especially in times of COVID-19. Still, little is known regarding the effects of H₂O₂ cleaning on indoor air composition. In this work we monitored time-resolved H₂O₂ concentrations during a cleaning campaign in an occupied single-family residence using a cavity ring-down spectroscopy (CRDS) H₂O₂ analyzer. During the cleaning experiments, we investigated how unconstrained (i.e., "real-life") surface cleaning with a hydrogen peroxide solution influenced the indoor air quality of the house, and performed controlled experiments to investigate factors that could influence H₂O₂ levels including surface area and surface material, ventilation, and dwell time of the cleaning solution. Mean peak H₂O₂ concentrations observed following all surface cleaning events were 135 ppbv. The factors with the greatest effect on H₂O₂ levels were distance of the cleaned surface from the detector inlet, type of surface cleaned, and solution dwell time.

Emerging investigator series: an instrument to measure and speciate the total reactive nitrogen budget indoors: description and field measurements

Reactive nitrogen species (N_r), defined here as all N-containing compounds except N₂ and N₂O, have been shown to be important drivers for indoor air quality. Key N_r species include NO_x (NO + NO₂), HONO and NH₃, which are known to have detrimental health effects. In addition, other N_r species that are not traditionally measured may be important chemical actors for indoor transformations (e.g. amines). Cooking and cleaning are significant sources of N_r, whose emission will vary depending on the type of activity and materials used. Here we present a novel instrument that measures the total gas-phase reactive nitrogen (tN_r) budget and key species NO_x, HONO, and NH₃ to demonstrate its suitability for indoor air quality applications. The tN_r levels were measured using a custom-built heated platinum (Pt) catalytic furnace to convert all N_r species to NO_x, called the tN_r oven. The measurement approach was validated through a series of control experiments, such that quantitative measurement and speciation of the total N_r budget are demonstrated. The optimum operating conditions of the tN_r oven were found to be 800 °C with a sampling flow rate of 630 cubic centimetres per minute (ccm). Oxidized nitrogen species are known to be quantitatively converted under these conditions. Here, the efficiency of the tN_r oven to convert reduced N_r species to NO_x was found to reach a maximum at 800 °C, with 103 ± 13% conversion for NH₃ and 79-106% for selected relevant amines. The observed variability in the conversion efficiency of reduced N_r species demonstrates the importance of catalyst temperature characterization for the tN_r oven. The instrument was deployed successfully in a commercial kitchen, a complex indoor environment with periods of rapidly changing levels, and shown to be able to reliably measure the tN_r budget during periods of longer-lived oscillations (>20 min), typical of indoor spaces. The measured NO_x, HONO and basic N_r (NH₃ and amines) were unable to account for all the measured tN_r, pointing to a substantial missing fraction (on average 18%) in the kitchen. Overall, the tN_r instrument will allow for detailed survey(s) of the key gaseous N_r species across multiple locations and may also identify missing N_r fractions, making this platform capable of stimulating more in-depth analysis in indoor atmospheres.

Measurements of Hydroxyl Radical Concentrations during Indoor Cooking Events: Evidence of an Unmeasured Photolytic Source of Radicals

The hydroxyl radical (OH) is the dominant oxidant in the outdoor environment, controlling the lifetimes of volatile organic compounds (VOCs) and contributing to the growth of secondary organic aerosols. Despite its importance outdoors, there have been relatively few measurements of the OH radical in indoor environments. During the House Observations of Microbial and Environmental Chemistry (HOMEChem) campaign, elevated concentrations of OH were observed near a window during cooking events, in addition to elevated mixing ratios of nitrous acid (HONO), VOCs, and nitrogen oxides (NOX). Particularly high concentrations were measured during the preparation of a traditional American Thanksgiving dinner, which required the use of a gas stove and oven almost continually for 6 h. A zero-dimensional chemical model underpredicted the measured OH concentrations even during periods when direct sunlight illuminated the area near the window, which increases the rate of OH production by photolysis of HONO. Interferences with measurements of nitrogen dioxide (NO2) and ozone (O3) suggest that unmeasured photolytic VOCs were emitted during cooking events. The addition of a VOC that photolyzes to produce peroxy radicals (RO2), similar to pyruvic acid, into the model results in better agreement with the OH measurements. These results highlight our incomplete understanding of the nature of oxidation in indoor environments.

Widespread formation of toxic nitrated bisphenols indoors by heterogeneous reactions with HONO

With numerous structurally diverse indoor contaminants, indoor transformation chemistry has been largely unexplored. Here, by integrating protein affinity purification and nontargeted mass spectrometry analysis (PUCA), we identified a substantial class of previously unrecognized indoor transformation products formed through gas-surface reactions with nitrous acid (HONO). Through the PUCA, we identified a noncommercial compound, nitrated bisphenol A (BPA), from house dust extracts strongly binding to estrogen-related receptor γ. The compound was detected in 28 of 31 house dust samples with comparable concentrations (ND to 0.30 μg/g) to BPA. Via exposing gaseous HONO to surface-bound BPA, we demonstrated it likely forms via a heterogeneous indoor chemical transformation that is highly selective toward bisphenols with electron-rich aromatic rings. We used 15N-nitrite for in situ labeling and found 110 nitration products formed from indoor contaminants with distinct aromatic moieties. This study demonstrates a previously unidentified class of chemical reactions involving indoor HONO, which should be incorporated into the risk evaluation of indoor contaminants, particularly bisphenols.

A review of indoor Gaseous organic compounds and human chemical Exposure: Insights from Real-time measurements

Gaseous organic compounds, mainly volatile organic compounds (VOCs), have become a wide concern in various indoor environments where we spend the majority of our daily time. The sources, compositions, variations, and sinks of indoor VOCs are extremely complex, and their potential impacts on human health are less understood. Owing to the deployment of the state-of-the-art real-time mass spectrometry during the last two decades, our understanding of the sources, dynamic changes and chemical transformations of VOCs indoors has been significantly improved. This review aims to summarize the key findings from mass spectrometry measurements in recent indoor studies including residence, classroom, office, sports center, etc. The sources and sinks, compositions and distributions of indoor VOCs, and the factors (e.g., human activities, air exchange rate, temperature and humidity) driving the changes in indoor VOCs are discussed. The physical and chemical processes of gas-particle partitioning and secondary oxidation processes of VOCs, and their impacts on human health are summarized. Finally, the recommendations for future research directions on indoor VOCs measurements and indoor chemistry are proposed.

The Effect of Human Occupancy on Indoor Air Quality through Real-Time Measurements of Key Pollutants

The primarily emitted compounds by human presence, e.g., skin and volatile organic compounds (VOCs) in breath, can react with typical indoor air oxidants, ozone (O₃), and hydroxyl radicals (OH), leading to secondary organic compounds. Nevertheless, our understanding about the formation processes of the compounds through reactions of indoor air oxidants with primary emitted pollutants is still incomplete. In this study we performed real-time measurements of nitrous acid (HONO), nitrogen oxides (NO_x = NO + NO₂), O₃, and VOCs to investigate the contribution of human presence and human activity, e.g., mopping the floor, to secondary organic compounds. During human occupancy a significant increase was observed of 1-butene, isoprene, and d-limonene exhaled by the four adults in the room and an increase of methyl vinyl ketone/methacrolein, methylglyoxal, and 3-methylfuran, formed as secondary compounds through reactions of OH radicals with isoprene. Intriguingly, the level of some compounds (e.g., m/z 126, 6-methyl-5-hepten-2-one, m/z 152, dihydrocarvone, and m/z 194, geranyl acetone) formed through reactions of O₃ with the primary compounds was higher in the presence of four adults than during the period of mopping the floor with commercial detergent. These results indicate that human presence can additionally degrade the indoor air quality.

Comparison of Simultaneous Measurements of Indoor Nitrous Acid: Implications for the Spatial Distribution of Indoor HONO Emissions

Despite its importance as a radical precursor and a hazardous pollutant, the chemistry of nitrous acid (HONO) in the indoor environment is not fully understood. We present results from a comparison of HONO measurements from a time-of-flight chemical ionization mass spectrometer (ToF-CIMS) and a laser photofragmentation/laser-induced fluorescence (LP/LIF) instrument during the House Observations of Microbial and Environmental Chemistry (HOMEChem) campaign. Experiments during HOMEChem simulated typical household activities and provided a dynamic range of HONO mixing ratios. The instruments measured HONO at different locations in a house featuring a typical air change rate (ACR) (0.5 h-1) and an enhanced mixing rate (∼8 h-1). Despite the distance between the instruments, measurements from the two instruments agreed to within their respective uncertainties (slope = 0.85, R2 = 0.92), indicating that the lifetime of HONO is long enough for it to be quickly distributed indoors, although spatial gradients occurred during ventilation periods. This suggests that emissions of HONO from any source can mix throughout the house and can contribute to OH radical production in sunlit regions, enhancing the oxidative capacity indoors. Measurement discrepancies were likely due to interferences with the LP/LIF instrument as well as calibration uncertainties associated with both instruments.

Gas-Phase Nitrous Acid (HONO) Is Controlled by Surface Interactions of Adsorbed Nitrite (NO2-) on Common Indoor Material Surfaces

Nitrous acid (HONO) is a household pollutant exhibiting adverse health effects and a major source of indoor OH radicals under a variety of lighting conditions. The present study focuses on gas-phase HONO and condensed-phase nitrite and nitrate formation on indoor surface thin films following heterogeneous hydrolysis of NO₂, in the presence and absence of light, and nitrate (NO₃^-) photochemistry. These thin films are composed of common building materials including zeolite, kaolinite, painted walls, and cement. Gas-phase HONO is measured using an incoherent broadband cavity-enhanced ultraviolet absorption spectrometer (IBBCEAS), whereby condensed-phase products, adsorbed nitrite and nitrate, are quantified using ion chromatography. All of the surface materials used in this study can store nitrogen oxides as nitrate, but only thin films of zeolite and cement can act as condensed-phase nitrite reservoirs. For both the photo-enhanced heterogeneous hydrolysis of NO₂ and nitrate photochemistry, the amount of HONO produced depends on the material surface. For zeolite and cement, little HONO is produced, whereas HONO is the major product from kaolinite and painted wall surfaces. An important result of this study is that surface interactions of adsorbed nitrite are key to HONO formation, and the stronger the interaction of nitrite with the surface, the less gas-phase HONO produced.

Detailed Investigation of the Contribution of Gas-Phase Air Contaminants to Exposure Risk during Indoor Activities

Analytical capabilities in atmospheric chemistry provide new opportunities to investigate indoor air. HOMEChem was a chemically comprehensive indoor field campaign designed to investigate how common activities, such as cooking and cleaning, impacted indoor air in a test home. We combined gas-phase chemical data of all compounds, excluding those with concentrations <1 ppt, with established databases of health effect thresholds to evaluate potential risks associated with gas-phase air contaminants and indoor activities. The chemical composition of indoor air is distinct from outdoor air, with gaseous compounds present at higher levels and greater diversity─and thus greater predicted hazard quotients─indoors than outdoors. Common household activities like cooking and cleaning induce rapid changes in indoor air composition, raising levels of multiple compounds with high risk quotients. The HOMEChem data highlight how strongly human activities influence the air we breathe in the built environment, increasing the health risk associated with exposure to air contaminants.

The influence of photochemistry on outdoor to indoor NO2 in some European museums

This paper reports 1 year of monthly average NO₂ indoor to outdoor (I/O) concentrations measured in 10 European museums, and a simple steady-state box model that explains the annual variation. The measurements were performed in the EU FP5 project Master (EVK-CT-2002-00093). The work provides extensive documentation of the annual variation of NO₂ I/O concentration ratios, with ratios above unity in the summer, in situations with no indoor emissions of NO₂ . The modelling included the most relevant production and removal processes of NO₂ and showed that the outdoor photolysis was the probable main explanation of the annual trends in the NO₂ I/O concentration ratios.

Indoor heterogeneous photochemistry of molds and their contribution to HONO formation

To better understand the impact of molds on indoor air quality, we studied the photochemistry of microbial films made by Aspergillus niger species, a common indoor mold. Specifically, we investigated their implication in the conversion of adsorbed nitrate anions into gaseous nitrous acid (HONO) and nitrogen oxides (NO_x ), as well as the related VOC emissions under different indoor conditions, using a high-resolution proton transfer reaction-time of flight-mass spectrometer (PTR-TOF-MS) and a long path absorption photometer (LOPAP). The different mold preparations were characterized by the means of direct injection into an Orbitrap high-resolution mass spectrometer with a heated electrospray ionization (ESI-Orbitrap-MS). The formation of a wide range of VOCs, having emission profiles sensitive to the types of films (either doped by potassium nitrate or not), cultivation time, UV-light irradiation, potassium nitrate concentration and relative humidity was observed. The formation of nitrous acid from these films was also determined and found to be dependent on light and relative humidity. Finally, the reaction paths for the NO_x and HONO production are proposed. This work helps to better understand the implication of microbial surfaces as a new indoor source for HONO emission.

Indoor ozone: Concentrations and influencing factors

Because people spend most of their time indoors, much of their exposure to ozone occurs in buildings, which are partially protective against outdoor ozone. Measurements in approximately 2000 indoor environments (residences, schools, and offices) show a central tendency for average indoor ozone concentration of 4-6 ppb and an indoor to outdoor concentration ratio of about 25%. Considerable variability in this ratio exists among buildings, as influenced by seven building-associated factors: ozone removal in mechanical ventilation systems, ozone penetration through the building envelope, air-change rates, ozone loss rate on fixed indoor surfaces, ozone loss rate on human occupants, ozone loss by homogeneous reaction with nitrogen oxides, and ozone loss by reaction with gas-phase organics. Among these, the most important are air-change rates, ozone loss rate on fixed indoor surfaces, and, in densely occupied spaces, ozone loss rate on human occupants. Although most indoor ozone originates outdoors and enters with ventilation air, indoor emission sources can materially increase indoor ozone concentrations. Mitigation technologies to reduce indoor ozone concentrations are available or are being investigated. The most mature of these technologies, activated carbon filtration of mechanical ventilation supply air, shows a high modeled health-benefit to cost ratio when applied in densely occupied spaces.

Spatiotemporal characterization of irradiance and photolysis rate constants of indoor gas-phase species in the UTest house during HOMEChem

We made intensive measurements of wavelength-resolved spectral irradiance in a test house during the HOMEChem campaign and report diurnal profiles and two-dimensional spatial distribution of photolysis rate constants (J) of several important indoor photolabile gases. Results show that sunlight entering through windows, which was the dominant source of ultraviolet (UV) light in this house, led to clear diurnal cycles, and large time- and location-dependent variations in local gas-phase photochemical activity. Local J values of several key indoor gases under direct solar illumination were 1.8-7.4 times larger-and more strongly dependent on time, solar zenith angle, and incident angle of sunlight relative to the window-than under diffuse sunlight. Photolysis rate constants were highly spatially heterogeneous and fast photochemical reactions in the gas phase were generally confined to within tens of cm of the region that were directly sunlit. Opening windows increased UV photon fluxes by 3 times and increased predicted local hydroxyl radical (OH) concentrations in the sunlit region by 4.5 times to 3.2 × 10⁷  molec cm^-3 due to higher J values and increased contribution from O₃ photolysis. These results can be used to improve the treatment of photochemistry in indoor chemistry models and are a valuable resource for future studies that use the publicly available HOMEChem measurements.

Volatile organic compound and particulate matter emissions from an ultrasonic essential oil diffuser

Ultrasonic essential oil diffusers (EODs) are a popular type of indoor scenting source. We performed a chamber study in which we measured the emissions from EODs used with lemon, lavender, eucalyptus, and grapeseed oils. Over the course of 15 min, the most abundant VOCs released from lemon, lavender, eucalyptus, and grapeseed oils were 2.6 ± 0.7 mg of d-limonene, 3.5 ± 0.4 mg of eucalyptol, 1.0 ± 0.1 mg of linalyl acetate, and 0.2 ± 0.02 mg of linalyl acetate, respectively. Each oil had a unique particulate matter (PM) emission profile in terms of size, number density, and rate. The dominant size ranges of the PM were 10-100 nm for lemon oil, 50-100 nm for lavender oil, 10-50 nm for lemon oil, and above 200 nm for grapeseed oil. PM₁ emission rates of approximately 2 mg/h, 0.1 mg/h, and 3 mg/h, were observed for lemon, lavender/eucalyptus, and grapeseed oils, respectively. A fivefold increase in PM₁ emission was measured when the EOD with eucalyptus oil was filled with tap water as opposed to deionized water. Modeling suggests that reasonable use cases of EODs can contribute substantially to primary and secondary PM in indoor environments, but this potential varies depending on the oil and water types used.

Heterogeneous Formation of HONO Catalyzed by CO2

Gas-phase nitrous acid (HONO) is a major precursor of hydroxyl radicals that dominate atmospheric oxidizing capacity. Nevertheless, pathways of HONO formation remain to be explored. This study unveiled an important CO₂-catalysis mechanism of HONO formation, using Born-Oppenheimer molecular dynamics simulations and free-energy samplings. In the mechanism, HCO₃^- formed from CO₂ hydrolysis reacts with NO₂ dimers to produce HONO at water surfaces, and simultaneously, itself reconverts back to CO₂ via intermediates OC(O)ONO^- and HOC(O)ONO. A flow system experiment was performed to confirm the new mechanism, which indicated that HONO concentrations with CO₂ injections were increased by 29.4-68.5%. The new mechanism can be extended to other humid surfaces. Therefore, this study unveiled a previously overlooked vital role of CO₂ that catalyzes formation of HONO and affects atmospheric oxidizing capacity.

A boron dipyrromethene (BODIPY) based probe for selective passive sampling of atmospheric nitrous acid (HONO) indoors

People spend up to 90% of their time indoors, and yet our understanding of indoor air quality and the chemical processes driving it are poorly understood, despite levels of key pollutants typically being higher indoors compared to outdoors. Nitrous acid (HONO) is a species that drives these indoor chemical processes, with potentially detrimental health effects. In this work, a BODIPY-based probe was synthesized with the aim of developing the first selective passive sampler for atmospheric HONO. Our probe and its products are easily detected by UV-Vis spectroscopy with molar extinct coefficients of 37 863 and 33 787 M^-1 cm^-1, respectively, and a detection limit of 14.8 ng mL^-1. When protonated, the probe fluoresces with a quantum yield of 33%, which is turned off upon reaction. The synthesized BODIPY probe was characterized using NMR and UV-Vis spectroscopy. Products were characterized by UV-Vis and ultra high-resolution mass spectrometry. The reaction kinetics of the probe with nitrite was studied using UV-Vis spectroscopy, which had a pseudo-first-order rate of k = 7.7 × 10^-4 s^-1. The rapid reaction makes this probe suitable for targeted ambient sampling of HONO. This was investigated through a proof-of-concept experiment with gaseous HONO produced by a custom high-purity calibration source delivering the sample to the BODIPY probe in an acidic aqueous solution in clean air and a real indoor air matrix. The probe showed quantitative uptake of HONO in both cases to form the same products observed from reaction with nitrite, with no indication of interferences from ambient NO or NO₂. The chemical and physical characteristics of the probe therefore make it ideal for use in passive samplers for selective sampling of HONO from the atmosphere.

Real-time characterization of aerosol particle composition, sources and influences of increased ventilation and humidity in an office

Most of human exposure to atmospheric pollutants occurs indoors, and the components of outdoor aerosols may have been changed in the way before reaching indoor spaces. Here we conducted real-time online measurements of mass concentrations and chemical composition of black carbon and the non-refractory species in PM_2.5 in an occupied office for approximately one month. The open-close windows and controlled dampness experiments were also performed. Our results show that indoor aerosol species primarily originate from outdoors with indoor/outdoor ratio of these species typically less than unity except for certain organic aerosol (OA) factors. All aerosol species went through filtration upon transport indoors. Ammonium nitrate and fossil fuel OA underwent evaporation or particle-to-gas partitioning, while less oxidized secondary OA (SOA) underwent secondary formation and cooking OA might have indoor sources. With higher particulate matter (PM) mass concentration outdoors than in the office, elevated natural ventilation increased PM exposure indoors and this increased exposure was prolonged when outdoor PM was scavenged. We found that increasing humidity in the office led to higher indoor PM mass concentration particularly more oxidized SOA. Overall, our results highlight that indoor exposure of occupants is substantially different from outdoor in terms of mass concentrations and chemical species.

HONO Production from Gypsum Surfaces Following Exposure to NO2 and HNO3: Roles of Relative Humidity and Light Source

Nitrous acid (HONO) is a toxic household pollutant and a major source of indoor OH radicals. The high surface-to-volume ratio and diverse lighting conditions make the indoor photochemistry of HONO complex. This study demonstrates surface uptake of NO₂ and gaseous HNO₃ followed by gas-phase HONO generation on gypsum surfaces, model system for drywall, under reaction conditions appropriate for an indoor air environment. Tens of parts per billion of steady-state HONO are detected under these experimental conditions. Mechanistic insight into this heterogeneous photochemistry is obtained by exploring the roles of material compositions, relative humidities, and light sources. NO₂ and HNO₃ are adsorbed onto drywall surfaces, which can generate HONO under illumination and under dark conditions. Photoenhanced HONO generation is observed for illumination with a solar simulator as well as with the common indoor light sources such as compact fluorescence light and incandescent light bulbs. Incandescent light sources release more HONO and NO₂ near the light source compared to the solar radiation. Overall, HONO production on the gypsum surface increases with the increase of RH up to 70% relative humidity; above that, the gaseous HONO level decreases due to surface loss. Heterogeneous hydrolysis of NO₂ is predicted to be the dominant HONO generation channel, where NO₂ is produced through the photolysis of surface-adsorbed nitrates. This hydrolysis reaction predominantly occurs in the first layer of surface-adsorbed water.

Factors affecting wavelength-resolved ultraviolet irradiance indoors and their impacts on indoor photochemistry

We measured wavelength-resolved ultraviolet (UV) irradiance in multiple indoor environments and quantified the effects of variables such as light source, solar angles, cloud cover, window type, and electric light color temperature on indoor photon fluxes. The majority of the 77 windows and window samples investigated completely attenuated sunlight at wavelengths shorter than 320 nm; despite variations among individual windows leading to differences in indoor HONO photolysis rate constants (J_HONO ) and local hydroxyl radical (OH) concentrations of up to a factor of 50, wavelength-resolved transmittance was similar between windows in residential and non-residential buildings. We report mathematical relationships that predict indoor solar UV irradiance as a function of solar zenith angle, incident angle of sunlight on windows, and distance from windows and surfaces for direct and diffuse sunlight. Using these relationships, we predict elevated indoor steady-state OH concentrations (0.80-7.4 × 10⁶ molec cm^-3 ) under illumination by direct and diffuse sunlight and fluorescent tubes near windows or light sources. However, elevated OH concentrations at 1 m from the source are only predicted under direct sunlight. We predict that reflections from indoor surfaces will have minor contributions to room-averaged indoor UV irradiance. These results may improve parameterization of indoor chemistry models.

Effect of Inorganic Salts on N-Containing Organic Compounds Formed by Heterogeneous Reaction of NO2 with Oleic Acid

Fatty acids are ubiquitous constituents of grime on urban and indoor surfaces and they represent important surfactants on organic aerosol particles in the atmosphere. Here, we assess the heterogeneous processing of NO₂ on films consisting of pure oleic acid (OA) or a mixture of OA and representative salts for urban grime and aerosol particles, namely Na₂SO₄ and NaNO₃. The uptake coefficients of NO₂ on OA under light irradiation (300 nm < λ < 400 nm) decreased with increasing relative humidity (RH), from (1.4 ± 0.1) × 10^-6 at 0% RH to (7.1 ± 1.6) × 10^-7 at 90% RH. The uptake process of NO₂ on OA gives HONO as a reaction product, and the highest HONO production was observed upon the heterogeneous reaction of NO₂ with OA in the presence of nitrate (NO₃^-) ions. The formation of gaseous nitroaromatic compounds was also enhanced in the presence of NO₃^- ions upon light-induced heterogeneous processing of NO₂ with OA, as revealed by membrane inlet single-photon ionization time-of-flight mass spectrometry (MI-SPI-TOFMS). These results suggest that inorganic salts can affect the heterogeneous conversion of gaseous NO₂ on fatty acids and enhance the formation of HONO and other N-containing organic compounds in the atmosphere.

Indoor heterogeneous photochemistry of furfural drives emissions of nitrous acid

People spend approximately 80% of their time indoor, making the understanding of the indoor chemistry an important task for safety. The high surface-area-to-volume ratio characteristic of indoor environments leads the semi-volatile organic compounds (sVOCs) to deposit on the surfaces. Using a long path absorption photometer (LOPAP), this work investigates the formation of nitrous acid (HONO) through the photochemistry of adsorbed nitrate anions and its enhancement by the presence of furfural. Using a high-resolution proton-transfer-reaction time-of-flight mass spectrometer (PTR-TOF-MS), this work also investigates the surface emissions of VOCs from irradiated films of furfural and a mix of furfural and nitrate anions. Among the emitted VOCs, 2(5H)-furanone/2-Butenedial was observed at high concentrations, leading to maleic anhydride formation after UV irradiation. Moreover, the addition of potassium nitrate to the film formed NO_x and HONO concentrations up to 10 ppb, which scales to ca. 4 ppb for realistic indoor conditions. This work helps to understand the high levels of HONO and NO_x measured indoors.

Indoor air quality in new and renovated low-income apartments with mechanical ventilation and natural gas cooking in California

This paper presents pollutant concentrations and performance data for code-required mechanical ventilation equipment in 23 low-income apartments at 4 properties constructed or renovated 2013-2017. All apartments had natural gas cooking burners. Occupants pledged to not use windows for ventilation during the study but several did. Measured airflows of range hoods and bathroom exhaust fans were lower than product specifications. Only eight apartments operationally met all ventilation code requirements. Pollutants measured over one week in each apartment included time-resolved fine particulate matter (PM_2.5 ), nitrogen dioxide (NO₂ ), formaldehyde and carbon dioxide (CO₂ ) and time-integrated formaldehyde, NO₂ and nitrogen oxides (NO_X ). Compared to a recent study of California houses with code-compliant ventilation, apartments were smaller, had fewer occupants, higher densities, and higher mechanical ventilation rates. Mean PM_2.5 , formaldehyde, NO₂ , and CO₂ were 7.7 µg/m³ , 14.1, 18.8, and 741 ppm in apartments; these are 4% lower, 25% lower, 165% higher, and 18% higher compared to houses with similar cooking frequency. Four apartments had weekly PM_2.5 above the California annual outdoor standard of 12 µg/m³ and also discrete days above the World Health Organization 24-hour guideline of 25 µg/m³ . Two apartments had weekly NO₂ above the California annual outdoor standard of 30 ppb.

Significant influences of TiO2 crystal structures on NO2 and HONO emissions from the nitrates photolysis

The emissions of NO₂ and HONO from the KNO₃ photolysis in the presence of TiO₂ were measured using a round-shape reactor coupled to a NO_x analyzer. TiO₂ played important roles in the emission flux density of NO₂ (R_NO2) and HONO (R_HONO), depending on crystal structures and mass ratios of TiO₂. R_NO2 and R_HONO significantly decreased with increasing the rutile and anatase mass ratios from 0 to 8 and 0.5 wt.%, respectively. Nevertheless, with further increasing the anatase mass ratio to 8 wt.%, there was an increase in R_NO2 and R_HONO. R_NO2 on KNO₃/TiO₂/SiO₂ had positive correlation with the KNO₃ mass (1-20 wt.%), irradiation intensity (80-400 W/m²) and temperature (278-308 K), while it had the maximum value at the relative humidity (RH) of 55%. R_HONO on KNO₃/TiO₂/SiO₂ slightly varied with the KNO₃ mass and temperature, whereas it increased with the irradiation intensity and RH. In addition, the mechanism for NO₂ and HONO emissions from the nitrates photolysis and atmospheric implications were discussed.

Loss of NO(g) to painted surfaces and its re-emission with indoor illumination

Heterogeneous surface reactions play a key role in the chemistry of the indoor environment because of the large indoor surface-to-volume ratio. The presence of photocatalytic material in indoor paints may allow photochemical reactions to occur at wavelengths of light that are present indoors. One such potential reaction is the heterogeneous photooxidation of NO to HONO. NO(g) is commonly found indoors, originating from combustion sources, ventilation and infiltration of outdoor air. We studied the interaction of NO(g) with painted surfaces illuminated with indoor fluorescent and incandescent lighting. There is a loss of NO(g) to painted surfaces in the dark at both 0 and 50% RH. At 50% RH, there is a re-release of some of that NO(g) under illumination. The same behavior is observed for illumination of different colored paints. This is in contrast to what is seen with TiO₂ as the substrate, where photoenhanced uptake of NO(g) and formation of NO₂ (g) are observed. We hypothesize that the loss of NO(g) is due to adsorption and diffusion into the paint. The re-release of NO under illumination is thought to be due to photooxidation of NO to HONO on the painted surface at higher relative humidities and subsequent HONO photolysis.

Heterogeneous photochemical uptake of NO2 on the soil surface as an important ground-level HONO source

Nitrous acid (HONO) production from the heterogeneous photochemical reaction of NO₂ on several Chinese soils was performed in a cylindrical reactor at atmospheric pressure. The NO₂ uptake coefficient (γ) and HONO yield (Y_HONO) on different soils were (0.42-5.16) × 10^-5 and 6.3%-69.6%, respectively. Although the photo-enhanced uptake of NO₂ on different soils was observed, light could either enhance or inhibit the conversion efficiency of NO₂ to HONO, depending on the properties of the soils. Soils with lower pH generally had larger γ and Y_HONO. Soil organics played a key role in HONO formation through the photochemical uptake of NO₂ on soil surfaces. The γ showed a positive correlation with irradiation and temperature, while it exhibited a negative relationship with relative humidity (RH). Y_HONO inversely depended on the soil mass (0.32-3.25 mg cm^-2), and it positively relied on the irradiance and RH (7%-22%). There was a maximum value for Y_HONO at 298 K. Based on the experimental results, HONO source strengths from heterogeneous photochemical reaction of NO₂ on the soil surfaces were estimated to be 0.2-2.7 ppb h^-1 for a mixing layer height of 100 m, which could account for the missing daytime HONO sources in most areas.

Hydrogen Peroxide Emission and Fate Indoors during Non-bleach Cleaning: A Chamber and Modeling Study

Activities such as household cleaning can greatly alter the composition of air in indoor environments. We continuously monitored hydrogen peroxide (H₂O₂) from household non-bleach surface cleaning in a chamber designed to simulate a residential room. Mixing ratios of up to 610 ppbv gaseous H₂O₂ were observed following cleaning, orders of magnitude higher than background levels (sub-ppbv). Gaseous H₂O₂ levels decreased rapidly and irreversibly, with removal rate constants (k_H2O2) 17-73 times larger than air change rate (ACR). Increasing the surface-area-to-volume ratio within the room caused peak H₂O₂ mixing ratios to decrease and k_H2O2 to increase, suggesting that surface uptake dominated H₂O₂ loss. Volatile organic compound (VOC) levels increased rapidly after cleaning and then decreased with removal rate constants 1.2-7.2 times larger than ACR, indicating loss due to surface partitioning and/or chemical reactions. We predicted photochemical radical production rates and steady-state concentrations in the simulated room using a detailed chemical model for indoor air (the INDCM). Model results suggest that, following cleaning, H₂O₂ photolysis increased OH concentrations by 10-40% to 9.7 × 10⁵ molec cm^-3 and hydroperoxy radical (HO₂) concentrations by 50-70% to 2.3 × 10⁷ molec cm^-3 depending on the cleaning method and lighting conditions.

Unexpectedly High Indoor HONO Concentrations Associated with Photochemical NO2 Transformation on Glass Windows

Nitrous acid (HONO) is an important gaseous pollutant contributing to indoor air pollution because it causes adverse health effects and is the main source of hydroxyl radicals (OH). Here, we present direct measurements of HONO produced through light-induced heterogeneous reactions of NO₂ with grime adsorbed on glass window. The uptake coefficients of NO₂ [γ(NO₂)] on the glass plates from the kitchen increased markedly from (2.3 ± 0.1) × 10^-6 at 0% RH to (4.1 ± 0.5) × 10^-6 at 90% RH. We report a significant quantity of daytime HONO produced in the kitchen, compared to the living room and bedroom. Kinetic modeling suggests that phase state and bulk diffusivity play important roles in the NO₂ uptake; the best fit to the measured uptake coefficients is obtained with fixed diffusion coefficients. Photon scattering may be occurring at the surface of the films, leading to enhanced photon-excitation rates of polycyclic aromatic hydrocarbons. By taking these effects into account, the results from this study indicate that the HONO yields obtained in this study can explain the missing HONO in the photochemical models describing the indoor air chemistry.

Cooking, Bleach Cleaning, and Air Conditioning Strongly Impact Levels of HONO in a House

The relative importance of common activities on indoor nitrous acid (HONO) mixing ratios was explored during high time resolution, month-long measurements by chemical ionization mass spectrometry in a previously unoccupied house. Indoor HONO varied from 0.2 to 84.0 ppb (mean: 5.5 ppb; median 3.8 ppb), an order of magnitude higher than simultaneously measured outdoor values, indicating important indoor sources. They agree well with simultaneous measurements of HONO by Laser-Photofragmentation/Laser-Induced Fluorescence. Before any combustion activities, the mixing ratio of 3.0 ± 0.3 ppb is indicative of secondary sources such as multiphase formation from NO₂. Cooking (with propane gas), especially the use of an oven, led to significant enhancements up to 84 ppb, with elevated mixing ratios persisting for a few days due to slow desorption from indoor surface reservoirs. Floor bleach cleaning led to prolonged, substantial decreases of up to 71-90% due to reactive processes. Air conditioning modulated HONO mixing ratios driven by condensation to wet surfaces in the AC unit. Enhanced ventilation also significantly lowered mixing ratios. Other conditions including human occupancy, ozone addition, and cleaning with terpene, natural product, and vinegar cleaners had a much smaller influence on HONO background levels measured following these activities.

A Novel Insight into the Ozone-Skin Lipid Oxidation Products Observed by Secondary Electrospray Ionization High-Resolution Mass Spectrometry

Emissions of secondary products through reactions of oxidants, ozone (O₃), and hydroxyl radical (·OH) with human skin lipids have become increasingly important in indoor environments. Here, we evaluate the secondary organic compounds formed through heterogeneous reactions of gaseous O₃ with hand skin lipids by using a high-resolution quadrupole Orbitrap mass spectrometer coupled to a commercial secondary electrospray ionization (SESI) source. More than 600 ions were detected over a period of less than 40 min real-time measurements, among which 53 ions were characterized with a significant increasing trend in signal intensity at the presence of O₃. Based on the detected ions, we suggest detailed reaction pathways initiated by ozone oxidation of squalene that results in primary and secondary ozonides; we noticed for the first time that these products may be further cleaved by direct reaction of nucleophilic ammonia (NH₃), emitted from human skin. Finally, we estimate the fate of secondarily formed carbonyl compounds with respect to their gas-phase reactions with ·OH, O₃, and NO₃ and compared with their removal by air exchange rate (AER) with outdoors. The obtained results suggest that human presence is a source of an important number of organic compounds, which can significantly influence the air quality in indoor environments.

High-Efficiency Air Cleaning Reduces Indoor Traffic-Related Air Pollution and Alters Indoor Air Chemistry in a Near-Roadway School

Schools in proximity to roadways expose students to traffic-related air pollution (TRAP). We investigate impacts of air-cleaning on indoor TRAP levels and indoor chemistry in a renovated school adjacent an interstate highway. We monitor air pollutants pre- and post-renovation and quantify efficiency of particle (MERV8 and 16 filters) and gas (functionalized activated carbon) air-cleaning. Time-resolved measurements show air-cleaning systems are effective, with in situ particle removal efficiency >94% across 10 nm to 10 μm. Activated carbon removed BTEX and NO₂ with variability in removal efficiency. Over eight months of monitoring, NO₂ removal efficiency was 96% initially and decreased to 61%; and BTEX removal efficiency was >80% or increased to >80%. Air-cleaning reduced indoor TRAP to below or near urban background. Air-cleaning systems suppressed indoor chemistry by reducing indoor levels of oxidants (NO₂, O₃) and reactive organics of indoor origin. When the air cleaning system was inactive, our data show that indoor SOA formation within the school was elevated. Loss rates of NO₂ and O₃ through the air-cleaning system were ∼1.5-2.4 h^-1 and ∼2.3 h^-1, respectively. Air-cleaning was 83% and 69% efficient, respectively, in removing monoterpenes and isoprene. By suppressing precursors, scaling calculations show air-cleaning prevented ∼3.4 mg/h of indoor SOA formation due to indoor ozone-monoterpene chemistry. For comparison, we estimate that filtration removed ∼130 mg/h of PM_0.01-0.3.

Indoor aerosol water content and phase state in U.S. residences: impacts of relative humidity, aerosol mass and composition, and mechanical system operation

Hygroscopic particulate matter (PM) constituents promote uptake of aerosol water (AW), depending on relative humidity (RH), which can constrain qualities such as organic aerosol (OA) phase state and inorganic aerosol (IA) deliquescence and efflorescence. This work provides a first incorporation of AW predictions into residential indoor PM simulations. The indoor model, IMAGES, which simulates factored OA concentrations and thermodynamics using the 2D-volatility basis set, was expanded to predict speciated IA concentrations, AW with κ-Köhler theory of hygroscopic growth, and OA phase state with glass transition temperatures. Since RH is the largest driver of AW and varies with meteorology, simulations were conducted using a database of historical ambient weather and pollution records spanning the sixteen U.S. climate zones, facilitating assessment of seasonal and regional trends. Over this diverse simulation set, the residential indoor AW mass was ∼10 to 100 times smaller than dry PM mass. This relative AW amount indoors was about ∼10 times smaller than outdoors, since indoor-emitted aerosol is likely less hygroscopic. The indoor OA phase state was typically semisolid, suggesting kinetic limitations might inhibit thermodynamic OA partitioning equilibrium from being established indoors. Residences in hot and humid climates during the summertime may have liquid indoor OA, while amorphous solid indoor OA can exist in cold climates. Deliquescence and efflorescence of recirculated IA within HVAC systems during cooling or heating, respectively, was also modeled. Oftentimes, two IA populations with different histories existing as wet or dry aerosol were generated by HVAC operation depending on indoor and outdoor environmental conditions and the HVAC operating mode.

Evaluation and impact factors of indoor and outdoor gas-phase nitrous acid under different environmental conditions

As an important indoor pollutant, nitrous acid (HONO) can contribute to the concentration of indoor OH radicals by photolysis via sunlight penetrating into indoor environments, thus affecting the indoor oxidizing capability. In order to investigate the concentration of indoor HONO and its impact factors, three different indoor environments and two different locations in urban and suburban areas were selected to monitor indoor and outdoor pollutants simultaneously, including HONO, NO, NO₂, nitrogen oxides (NO_x), O₃, and particle mass concentration. In general, the concentration of indoor HONO was higher than that outdoors. In the urban area, indoor HONO with high average concentration (7.10 ppbV) was well-correlated with the temperature. In the suburban area, the concentration of indoor HONO was only about 1-2 ppbV, and had a good correlation with indoor relative humidity. It was mainly attributed to the heterogeneous reaction of NO₂ on indoor surfaces. The sunlight penetrating into indoor environments from outside had a great influence on the concentration of indoor HONO, leading to a concentration of indoor HONO close to that outdoors.

Indoor acids and bases

Numerous acids and bases influence indoor air quality. The most abundant of these species are CO₂ (acidic) and NH₃ (basic), both emitted by building occupants. Other prominent inorganic acids are HNO₃ , HONO, SO₂ , H₂ SO₄ , HCl, and HOCl. Prominent organic acids include formic, acetic, and lactic; nicotine is a noteworthy organic base. Sources of N-, S-, and Cl-containing acids can include ventilation from outdoors, indoor combustion, consumer product use, and chemical reactions. Organic acids are commonly more abundant indoors than outdoors, with indoor sources including occupants, wood, and cooking. Beyond NH₃ and nicotine, other noteworthy bases include inorganic and organic amines. Acids and bases partition indoors among the gas-phase, airborne particles, bulk water, and surfaces; relevant thermodynamic parameters governing the partitioning are the acid-dissociation constant (K_a ), Henry's law constant (K_H ), and the octanol-air partition coefficient (K_oa ). Condensed-phase water strongly influences the fate of indoor acids and bases and is also a medium for chemical interactions. Indoor surfaces can be large reservoirs of acids and bases. This extensive review of the state of knowledge establishes a foundation for future inquiry to better understand how acids and bases influence the suitability of indoor environments for occupants, cultural artifacts, and sensitive equipment.

Formation of Low-Volatile Products and Unexpected High Formaldehyde Yield from the Atmospheric Oxidation of Methylsiloxanes

With stricter regulation of atmospheric volatile organic compounds (VOCs) originating from fossil fuel-based vehicles and industries, the use of volatile chemical products (VCPs) and the transformation mechanism of VCPs have become increasingly important to quantify air quality. Volatile methylsiloxanes (VMS) are an important class of VCPs and high-production chemicals. Using quantum chemical calculations and kinetics modeling, we investigated the reaction mechanism of peroxy radicals of VMS, which are key intermediates in determining the atmospheric chemistry of VMS. L2-RSiCH₂O₂^• and D3-RSiCH₂O₂^• derived from hexamethyldisiloxane and hexamethylcyclotrisiloxane, respectively, were selected as representative model systems. The results indicated that L2-RSiCH₂O₂^• and D3-RSiCH₂O₂^• follow a novel Si-C-O rearrangement-driven autoxidation mechanism, leading to the formation of low volatile silanols and high yield of formaldehyde at low NO/HO₂^• conditions. At high NO/HO₂^• conditions, L2-RSiCH₂O₂^• and D3-RSiCH₂O₂^• react with NO/HO₂^• to form organic nitrate, hydroperoxide, and active alkoxy radicals. The alkoxy radicals further follow a Si-C-O rearrangement step to finally form formate esters. The novel Si-C-O rearrangement mechanism of both peroxy and alkoxy radicals are supported by available experimental studies on the oxidation of VMS. Notably, the high yield of formaldehyde is estimated to significantly contribute to formaldehyde pollution in the indoor environment, especially during indoor cleaning.

Multiphase Chemistry Controls Inorganic Chlorinated and Nitrogenated Compounds in Indoor Air during Bleach Cleaning

We report elevated levels of gaseous inorganic chlorinated and nitrogenated compounds in indoor air while cleaning with a commercial bleach solution during the House Observations of Microbial and Environmental Chemistry field campaign in summer 2018. Hypochlorous acid (HOCl), chlorine (Cl₂), and nitryl chloride (ClNO₂) reached part-per-billion by volume levels indoors during bleach cleaning-several orders of magnitude higher than typically measured in the outdoor atmosphere. Kinetic modeling revealed that multiphase chemistry plays a central role in controlling indoor chlorine and reactive nitrogen chemistry during these periods. Cl₂ production occurred via heterogeneous reactions of HOCl on indoor surfaces. ClNO₂ and chloramine (NH₂Cl, NHCl₂, NCl₃) production occurred in the applied bleach via aqueous reactions involving nitrite (NO₂^-) and ammonia (NH₃), respectively. Aqueous-phase and surface chemistry resulted in elevated levels of gas-phase nitrogen dioxide (NO₂). We predict hydroxyl (OH) and chlorine (Cl) radical production during these periods (10⁶ and 10⁷ molecules cm^-3 s^-1, respectively) driven by HOCl and Cl₂ photolysis. Ventilation and photolysis accounted for <50% and <0.1% total loss of bleach-related compounds from indoor air, respectively; we conclude that uptake to indoor surfaces is an important additional loss process. Indoor HOCl and nitrogen trichloride (NCl₃) mixing ratios during bleach cleaning reported herein are likely detrimental to human health.

The atmospheric chemistry of indoor environments

Through air inhalation, dust ingestion and dermal exposure, the indoor environment plays an important role in controlling human chemical exposure. Indoor emissions and chemistry can also have direct impacts on the quality of outdoor air. And so, it is important to have a strong fundamental knowledge of the chemical processes that occur in indoor environments. This review article summarizes our understanding of the indoor chemistry field. Using a molecular perspective, it addresses primarily the new advances that have occurred in the past decade or so and upon developments in our understanding of multiphase partitioning and reactions. A primary goal of the article is to contrast indoor chemistry to that which occurs outdoors, which we know to be a strongly gas-phase, oxidant-driven system in which substantial oxidative aging of gases and aerosol particles occurs. By contrast, indoor environments are dark, gas-phase oxidant concentrations are relatively low, and due to air exchange, only short times are available for reactive processing of gaseous and particle constituents. However, important gas-surface partitioning and reactive multiphase chemistry occur in the large surface reservoirs that prevail in all indoor environments. These interactions not only play a crucial role in controlling the composition of indoor surfaces but also the surrounding gases and aerosol particles, thus affecting human chemical exposure. There are rich research opportunities available if the advanced measurement and modeling tools of the outdoor atmospheric chemistry community continue to be brought indoors.

Understanding the Spatial Heterogeneity of Indoor OH and HO2 due to Photolysis of HONO Using Computational Fluid Dynamics Simulation

Indoor photolysis of nitrous acid (HONO) generates hydroxyl radicals (OH), and since OH is fast reacting, it may be confined within the HONO-photolyzing indoor volume of light. This study investigated the HONO-photolysis-induced formation of indoor OH, the transformation of OH to hydroperoxy radicals (HO₂), and resulting spatial distributions of those radicals and their oxidation products. To do so, a computational fluid dynamics (CFD) model framework was established to simulate HONO photolysis in a room and subsequent reactions associated with OH and HO₂ under a typical range of indoor lighting and ventilation conditions. The results showed that OH and HO₂ were essentially confined in the volume of HONO-photolyzing light, but oxidation products were relatively well distributed throughout the room. As the light volume increased, more total in-room OH was produced, thereby increasing oxidation product concentrations. Spatial distributions of OH and HO₂ varied by the type of artificial light (e.g., fluorescent versus incandescent), due to differences in photon flux as a function of light source and the distance from the source. The HO₂ generation rate and air change rate made notable impacts on product concentrations.

Indoor boundary layer chemistry modeling

Ozone (O₃ ) chemistry is thought to dominate the oxidation of indoor surfaces. We consider the hypothesis that reactions taking place within indoor boundary layers result in greater than anticipated hydroxyl radical (OH) deposition rates. We develop models that account for boundary layer mass-transfer phenomena, O₃ -terpene chemistry and OH formation, removal, and deposition; we solve these analytically and by applying numerical methods. For an O₃ -limonene system, we find that OH flux to a surface with an O₃ reaction probability of 10^-8 is 4.3 × 10^-5 molec/(cm² s) which is about 10 times greater than predicted by a traditional boundary layer theory. At very low air exchange rates the OH surface flux can be as much as 10% of that for O₃ . This effect becomes less pronounced for more O₃ -reactive surfaces. Turbulence intensity does not strongly influence the OH concentration gradient except for surfaces with an O₃ reaction probability >10^-4 . Although the O₃ flux dominates OH flux under most conditions, OH flux can be responsible for as much as 10% of total oxidant uptake to otherwise low-reactivity surfaces. Further, OH chemistry differs from that for ozone; therefore, its deposition is important in understanding the chemical evolution of some indoor surfaces and surface films.

Impacts of six potential HONO sources on HOx budgets and SOA formation during a wintertime heavy haze period in the North China Plain

The Weather Research and Forecasting/Chemistry (WRF-Chem) model updated with six potential HONO sources (i.e., traffic, soil, biomass burning and indoor emissions, and heterogeneous reactions on aerosol and ground surfaces) was used to quantify the impact of the six potential HONO sources on the production and loss rates of OH and HO₂ radicals and the concentrations of secondary organic aerosol (SOA) in the Beijing-Tianjin-Heibei (BTH) region of China during a winter heavy haze period of Nov. 29-Dec. 3, 2017. The updated WRF-Chem model well simulated the observed HONO concentrations at the Wangdu site, especially in the daytime, and well reproduced the observed diurnal variations of regional-mean O₃ in the BTH region. The traffic emission source was an important HONO source during nighttime but not significant during daytime, heterogeneous reactions on ground/aerosol surfaces were important during nighttime and daytime. We found that the six potential HONO sources led to a significant enhancement in the dominant production and loss rates of HO_x on the wintertime heavy haze and nonhaze days (particularly on the heavy haze day), an enhancement of 5-25 μg m^-3 (75-200%) in the ground SOA in the studied heavy haze event, and an enhancement of 2-15 μg m^-3 in the meridional-mean SOA on the heavy haze day, demonstrating that the six potential HONO sources accelerate the HO_x cycles and aggravate haze events. HONO was the key precursor of primary OH in the BTH region in the studied wintertime period, and the photolysis of HONO produced a daytime mean OH production rate of 2.59 ppb h^-1 on the heavy haze day, much higher than that of 0.58 ppb h^-1 on the nonhaze day. Anthropogenic SOA dominated in the BTH region in the studied wintertime period, and its main precursors were xylenes (42%), BIGENE (31%) and toluene (21%).

Measuring the Building Envelope Penetration Factor for Ambient Nitrogen Oxides

Much of human exposure to nitrogen oxides (NO_x) of ambient origin occurs indoors. Reactions with materials inside building envelopes are expected to influence the amount of ambient NO_x that infiltrates indoors. However, envelope penetration factors for ambient NO_x constituents have never been measured. Here, we develop and apply methods to measure the penetration factor and indoor loss rates for ambient NO_x constituents using time-resolved measurements in an unoccupied apartment unit. Multiple test methods and parameter estimation approaches were tested, including natural and artificial indoor NO_x elevation with and without accounting for indoor oxidation reactions. Twelve of 16 tests yielded successful estimates of penetration factors and indoor loss rates. The penetration factor for NO was confirmed to be ∼1 and the mean (±s.d.) NO₂ penetration factor was 0.72 ± 0.06 with a mean relative uncertainty of ∼15%. The mean (±s.d.) indoor NO₂ loss rate was 0.27 ± 0.12 h^-1, ranging 0.06-0.47 h^-1, with strong correlations with indoor relative and absolute humidity. Indoor NO loss rates were strongly correlated with the estimated ozone concentration in infiltrating air. Results suggest that envelope penetration factors and loss rates for NO_x constituents can be reasonably estimated across a wide range of conditions using these approaches.

Role of location, season, occupant activity, and chemistry in indoor ozone and nitrogen oxide mixing ratios

Understanding the oxidizing environment indoors is important for predicting indoor air quality and its impact on human health. We made continuous time-resolved measurements (30 s) of several oxidants and oxidant precursors (collectively referred to as oxidant*): ozone (O3), nitric oxide (NO), and NO2* - the sum of nitrogen dioxide (NO2) and nitrous acid (HONO). These species were measured in three indoor environments - an occupied residence, a chemistry laboratory, and an academic office - in Syracuse, New York, during two seasons in 2017 and 2018. Oxidant* levels differed greatly between the residence, the lab and the office. Indoor-to-outdoor ratios (I/O) of O3 were 0.03 and 0.67 in the residence and office; I/ONO (I/ONO2*) were 11.70 (1.26) in the residence and 0.13 (1.70) in the office. Little seasonal variability was observed in the lab and office, but O3 and NO2* levels in the residence were greater in spring than in winter, while NO levels were lower. Human activities such as cooking and opening patio doors resulted in large changes in oxidant* mixing ratios in the residence. In situ chamber experiments demonstrated that the increase in O3 and NO2* levels during door-open periods was due to a combination of physical mixing between indoor and outdoor air, gas-phase production of NO2 from O3-NO chemistry, and heterogeneous formation of HONO on indoor surfaces. Our results also highlight the importance of chemistry (with NO, alkenes, and surfaces) in O3 mixing ratios in the residence, especially during door-open periods.

Assessing indoor gas phase oxidation capacity through real-time measurements of HONO and NOx in Guangzhou, China

The hydroxyl radical (OH) is one of the most important oxidants controlling the oxidation capacity of the indoor atmosphere. One of the main OH sources indoors is the photolysis of nitrous acid (HONO). In this study, real-time measurements of HONO, nitrogen oxides (NOx) and ozone (O3) in an indoor environment in Guangzhou, China, were performed under two different conditions: (1) in the absence of any human activity and (2) in the presence of cooking. The maximum NOx and HONO levels drastically increased from 15 and 4 ppb in the absence of human activity to 135 and 40 ppb during the cooking event, respectively. The photon flux was determined for the sunlit room, which has a closed south-east oriented window. The photon flux was used to estimate the photolysis rate constants of NO2, J(NO2), and HONO, J(HONO), which span the range between 8 × 10-5 and 1.5 × 10-5 s-1 in the morning from 9:30 to 11:45, and 8.5 × 10-4 and 1.5 × 10-4 s-1 at noon, respectively. The OH concentrations calculated by photostationary state (PSS) approach, observed around noon, are very similar, i.e., 2.4 × 106 and 3.1 × 106 cm-3 in the absence of human activity and during cooking, respectively. These results suggest that under "high NOx" conditions (NOx higher than a few ppb) and with direct sunlight in the room, the NOx and HONO chemistry would be similar, independent of the geographic location of the indoor environment, which facilitates future modeling studies focused on indoor gas phase oxidation capacity.