Integrating Biolayer Interferometry, Atomic Force Microscopy, and Density Functional Theory Calculation Studies on the Affinity between Humic Acid Fractions and Graphene Oxide

Influences of released humic acids during thermal hydrolysis on sludge anaerobic digestion: New insights from the molecular weight of humic acids

Humic acids (HAs) would be excessively released during thermal hydrolysis pretreatment (THP) and deeply disturb anaerobic digestion (AD) of waste activated sludge (WAS). The molecular weights of HAs could affect HAs entering microbial cells, binding with digestive enzymes and participating in electron transfer, thereby determining its influences on sludge AD. Results in this study confirmed the different influences of HAs from diverse sources on sludge AD indeed had significant correlations with their molecular weights. The presence of commercial HAs (SAHA) inhibited methane production by 53.3% at 0.5 g/L while HAs extracted from raw sludge (WNHA) increased methane production by 20.5% at the same concentration, which attribute to the comprehensive impacts from their differences in functional group compositions and molecular weights. Moreover, comparing to WNHA, the HAs extracted from thermally hydrolyzed sludge (THHA) showed unchanged functional group compositions but reduced methane generation facilitation to 5.1%, which only be due to its decreased molecular weights. In-depth research indicated that HAs influences on enzymes were closely relative to its molecular weight. HAs with greater molecular weights presented more significant inhibition to extracellular enzymes while micromolecular HAs affected intracellular enzymes more. Furthermore, macromolecular HAs promoted sludge solubilization and acidification but hindered hydrolysis and methanogenesis, whereas micromolecular HAs promoted acidification but inhibited methanogenesis. This study underscored the importance of changes in molecular weight of HAs during sludge THP, offering insights into previous discrepancies in reports on HAs effects on sludge AD.

Preferential adsorption of medium molecular weight proteins in extracellular polymeric substance alleviates toxicity of small-sized microplastics to Skeletonema costatum

Extracellular polymeric substances (EPS) secreted by organisms tend to encapsulate microplastics (MPs), forming an EPS-corona that affects the fate of MPs in marine ecosystems. However, the impact of the EPS-corona on the biotoxicity of MPs to marine organisms remains poorly understood. Herein, the effect of the EPS-corona on the toxicity of polystyrene (PS) MPs of different sizes (0.1 and 1 µm) to Skeletonema costatum (S. costatum) was investigated. The preferential adsorption of medium molecule weight (∼55 kDa) proteins onto PS MPs mainly contributed to the EPS-corona formation, decreasing the surface charge negativity of small-sized PS MPs (0.1 µm) by 72.4 %. Nitrogen (N) and oxygen (O) moieties in polysaccharides and proteins were identified as the preferential adsorption sites in the EPS-PS MPs interaction. Density functional theory (DFT) calculations confirmed the nuclear magnetic resonance spectroscopy (NMR) results, revealing that the binding mode between EPS and PS MPs was mainly hydrogen bonding. In addition, EPS-corona increased the cell density of S. costatum by 35.5-36.0 % when exposed to small-sized PS MPs (0.1 µm, 25-50 mg/L). These findings provide new insights into how EPS-corona affects the environmental fate and ecological risks associated with micro- and nano-sized plastics in marine ecosystems.

Mechanisms of surface groups regulating developmental toxicity of graphene-based nanomaterials via glycerophospholipid metabolic pathway

Surface modification of graphene-based nanomaterials (GBNs) may occur in aquatic environment and during intentional preparation. However, the influence of the surface groups on the developmental toxicity of GBNs has not been determined. In this study, we evaluated the developmental toxicity of three GBNs including GO (graphene oxide), RGO (reduced GO) and RGO-N (aminated RGO) by employing zebrafish embryos at environmentally relevant concentrations (1-100 μg/L), and the underlying metabolic mechanisms were explored. The results showed that both GO and RGO-N disturbed the development of zebrafish embryos, and the adverse effect of GO was greater than that of RGO-N. Furthermore, the oxygen-containing groups of GBNs play a more important role in inducing developmental toxicity compared to size, defects and nitrogen-containing groups. Specifically, the epoxide and hydroxyl groups of GBNs increased their intrinsic oxidative potential, promoted the generation of ROS, and caused lipid peroxidation. Moreover, a significant decrease in guanosine and abnormal metabolism of multiple glycerophospholipids were observed in all three GBN-treated groups. Nevertheless, GO exposure triggered more metabolic activities related to lipid peroxidation than RGO or RGO-N exposure, and the disturbance intensity of the same metabolite was greater than that of the other two agents. These findings reveal underlying metabolic mechanisms of GBN-induced developmental toxicity.

Algal extracellular polymeric substance compositions drive the binding characteristics, affinity, and phytotoxicity of graphene oxide in water

Graphene oxide (GO, a popular 2D nanomaterial) poses great potential in water treatment arousing considerable attention regarding its fate and risk in aquatic environments. Extracellular polymeric substances (EPS) exist widely in water and play critical roles in biogeochemical processes. However, the influences of complex EPS fractions on the fate and risk of GO remain unknown in water. This study integrates fluorescence excitation-emission matrix-parallel factor, two-dimensional correlation spectroscopy, and biolayer interferometry studies on the binding characteristics and affinity between EPS fractions and GO. The results revealed the preferential binding of fluorescent aromatic protein-like component, fulvic-like component, and non-fluorescent polysaccharide in soluble EPS (S-EPS) and bound EPS (B-EPS) on GO via π-π stacking and electrostatic interaction that contributed to a higher adsorption capacity of S-EPS on GO and weaker affinity than of B-EPS. Moreover, the EPS fractions drive the morphological and structural alterations, and the attenuated colloid stability of GO in water. Notably, GO-EPS induced stronger phytotoxicity (e.g., photosynthetic damage, and membrane lipid remodeling) compared to pristine GO. Metabolic and functional lipid analysis further elucidated the regulation of amino acid, carbohydrate, and lipid metabolism contributed to the persistent phytotoxicity. This work provides insights into the roles and mechanisms of EPS fractions composition in regulating the environmental fate and risk of GO in natural water.

Toxicity effects and mechanism of micro/nanoplastics and loaded conventional pollutants on zooplankton: An overview

Micro/nanoplastics in aquatic environments is a noteworthy environmental problem. Zooplankton, an important biological group in aquatic ecosystems, readily absorb micro/nanoplastics and produce a range of toxic endpoints due to their small size. This review summarises relevant studies on the effects of micro/nanoplastics on zooplankton, including combined effects with conventional pollutants. Frequently reported adverse effects include acute/chronic lethal effects, oxidative stress, gene expression, energetic homeostasis, and growth and reproduction. Obstruction by plastic entanglement and blockage is the physical mechanism. Genotoxicity and cytotoxicity are molecular mechanisms. Properties of micro/nanoplastics, octanol/water partition coefficients of conventional pollutants, species and intestinal environments are important factors influencing single and combined toxicity. Selecting a wider range of micro/nanoplastics, focusing on the aging process and conducting field studies, adopting diversified zooplankton models, and further advancing the study of mechanisms are the outstanding prospects for deeper understanding of impacts of micro/nanoplastics on aquatic ecosystem.

An environmentally friendly strategy for reducing the environmental risks of heavy metals adsorbed by kaolinite

Plenty of heavy metals (HMs) that are adsorbed on clay minerals (such as kaolinite), in addition to low molecular-weight organic acids (such as oxalic acid (OA)) with high activities, are widespread in the natural environment. In the present study, the effects of OA on the environmental behaviors of Pb2+/Cd2+ adsorbed by kaolinite have been investigated. The effectiveness and mechanisms of calcium silicate (CS) and magnesium silicate (MS) in reducing the environmental risks of the HMs have also been studied. The results showed that the releases of Pb2+/Cd2+ increased with an increasing concentration of OA. When different dosages of CS/MS were added to the aging system, a redistribution of HMs took place and the free form of Pb2+/Cd2+ decreased to very low levels. Also, the unextractable Pb2+/Cd2+ increased to high levels. Furthermore, a series of characterizations showed that the released HMs were re-captured by the CS/MS. In addition, the CS immobilized the OA in the solution during the aging process, which also facilitated an immobilization of the carbon element in the environment. In general, the present study has contributed to a further understanding of the transport behaviors of the HMs in natural environments, and of the interactions between CS (or MS), the environmental media, and the heavy metal contaminants. In addition, this study has also provided an eco-friendly strategy for an effective remediation of heavy metal pollution.

Focus on Co-digestion of waste activated sludge and food waste via yeast pre-fermentation and biochar supplementation: The optimization and mechanism

Anaerobic digestion is a promising method to recover energy from waste, but the slow rate of fermentation hinders its application. Yeast pre-fermentation has been reported to enhance organic matter solubilization and ethanol production to promote syntrophic metabolism and methanogenesis. However, the pre-fermentation with yeast has not been optimized so far. In this study, the lab-scale experiment was conducted to optimize operational conditions, and a pilot-scale study was conducted to evaluate the combined strategy of yeast pre-fermentation and biochar supplementation. Results demonstrated that at a fermentation time of 6 h, temperature of 30 °C, and dry yeast dosage of 2‰, the highest ethanol production was achieved, which accounted for 6.2% of the total COD of pre-fermentation effluent of a mixture of waste-activated sludge and food waste. The methane yield of the pre-fermented waste averaged 161.3 mL/g VS/d, which was 18.7% higher than that of the control group without the yeast inoculation (135.8 mL/g VS/d). With supplementing biochar of 0.5 and 1 g/L, the average methane production was 27.8% and 36.4% higher than the control group, respectively. The volatile solid removal rate was over 10% higher than the control (58.2 ± 3.12%). Consistently, the electrochemical properties of sludge with biochar were significantly improved. A pilot-scale experiment further showed that the methane production with the yeast pre-fermentation and biochar supplementation reached 227 mL/g VS/d, 54.3% higher than that without yeast pre-fermentation and biochar. This study provided a feasible method to combine yeast pre-fermentation and biochar supplementation under optimal conditions, which effectively increased methane production during anaerobic digestion of organic waste.

Carbon-based nanomaterials mediated adsorption and photodegradation of typical organic contaminants in aqueous fulvic acid solution

In this work, the formation of carbon-based nanomaterials-fulvic acid (CNMs-FA) composites and their capacities for the adsorption and photodegradation of typical organic contaminants in aqueous solutions were investigated. The results suggested that the formation of CNMs-FA composites was dominated by adsorbing FA on CNMs via the physisorption process, which fit the pseudo-first-order kinetic model and the Langmuir isotherm model. The formed CNMs-FA composites were characterized by using the Brunauer-Emmett-Teller, scanning electron microscopy, and infrared spectroscopy techniques and further applied for examining their effects on the adsorption and photodegradation of selected organic contaminants in aqueous solutions. The adsorption of organic contaminants on CNMs-FA composites is mainly involved in hydrogen bonding and electrostatic interactions between organic contaminants and FA species adhering to CNMs. In addition, the CNMs-FA composites are able to promote the photosensitive degradation of organic contaminants due to the photogenerated reactive species including ROS and CNMs-3FA* under sunlight irradiation. This study provided a deeper and more comprehensive understanding of the environmental behavior of CNMs in real natural surface water and clarified the underlying mechanisms.

Maternal exposure to sunlight-irradiated graphene oxide induces neurodegeneration-like symptoms in zebrafish offspring through intergenerational translocation and genomic DNA methylation alterations

The physiochemical properties of graphene oxide may be affected by sunlight irradiation. However, the underlying mechanisms that alter the properties and subsequent intergenerational effects are not sufficiently investigate. Epigenetics is an early sensitive marker for the intergenerational effects of nanomaterial exposure due to the epigenetic memory. In this study, we investigate changes in the physicochemical properties and the intergenerational effects of maternal exposure to simulated sunlight-irradiated polyethyleneimine-functionalized graphene oxide (SL-PEI-GO). Results show that the physicochemical properties of polyethyleneimine-functionalized graphene oxide (PEI-GO) can be altered significantly by the oxidation of carbon atoms with unpaired electrons present in the defects and on the edges of PEI-GO by sunlight. First, the positive charges, sharp edges, defects and disordered structures of SL-PEI-GO make it translocate from maternal zebrafish to offspring, thus catalyzing the production of reactive oxygen species and damaging mitochondria directly. In addition, changes in DNA methylation reduce the expression of protocadherin1a, protocadherin19 and cadherin4, thus destroying cell membrane integrity, cell adhesion and Ca2+ binding. The alteration of DNA methylation induced by maternal exposure activates the Ca2+-CaMKK-brsk2a pathway, which catalyzes the phosphorylation of Tau and eventually results in the appearance of neurodegeneration-like symptoms, including the loss of neurons and neurobehavioral disorders. This study demonstrates that maternal exposure to SL-PEI-GO induces clear neurodegeneration-like symptoms in offspring through both the intergenerational translocation of nanomaterials and differential DNA methylation. These findings may provide new insights into the health risks of nanomaterials altered by nature conditions.

Intrinsic mechanisms for the inhibition effect of graphene oxide on the catalysis activity of alpha amylase

Comprehending the interactions between graphene oxide (GO) and enzymes is critical for understanding the toxicities of GO. In this study, the inherent interactions of GO with α-amylase as a typical enzyme, and the impacts of GO on the conformation and biological activities of α-amylase were systematically investigated. The results reveal that GO formed ground-state complex with α-amylase primarily via hydrogen bonding and van der Waals interactions, thus quenching the intrinsic fluorescence of the protein statically. Particularly, the strong interactions altered the microenvironment of tyrosine and tryptophan residues, caused rearrangement of polypeptide structure, and reduced the contents of α-helices and β-sheets, thus changing the conformational structure of α-amylase. According to molecular docking results, GO binds with the amino acid residues (i.e., His299, Asp300, and His305) of α-amylase mainly through hydrogen bonding, which is in accordance with in vitro incubation experiments. As a consequence, the ability of α-amylase to catalyze starch hydrolysis into glucose was depressed by GO, suggesting that GO might cause dysfunction of α-amylase. This study discloses the intrinsic binding mechanisms of GO with α-amylase and provides novel insights into the adverse effects of GO as it enters organisms.

Simultaneous removal of pharmaceuticals and heavy metals from aqueous phase via adsorptive strategy: A critical review

The coexistence of pharmaceuticals and heavy metals is regarded as a serious threat to aquatic environments. Adsorbents have been widely applied to the simultaneous removal of pharmaceuticals and metals from aqueous phase. Through a comprehensive review, behaviors that promote, inhibit, or have no effect on simultaneous adsorption of pharmaceuticals and heavy metals were found to depend on the system of contaminants and adsorbents and their environmental conditions, such as: characteristics of adsorbent and pollutant, temperature, pH, inorganic ions, and natural organic matter. Bridging and competition effects are the main reasons for promoting and inhibiting adsorption in coexisting systems, respectively. The promotion is more significant in neutral or alkaline conditions. After simultaneous adsorption, a solvent elution approach was most commonly used for regeneration of saturated adsorbents. To conclude, this work could help to sort out the theoretical knowledge in this field, and may provide new insights into the prevention and control of pharmaceuticals and heavy metals coexisting in wastewater.

Chemodiversity of soil organic matters determines biodegradation of polychlorinated biphenyls by a graphene oxide-assisted bacterial agent

A promising strategy for degrading persistent organic pollutants (POPs) in soil is amendment with nanomaterial-assisted functional bacteria. However, the influence of soil organic matter chemodiversity on the performance of nanomaterial-assisted bacterial agents remains unclear. Herein, different types of soil (Mollisol soil, MS; Ultisol soil, US; and Inceptisol soil, IS) were inoculated with a graphene oxide (GO)-assisted bacterial agent (Bradyrhizobium diazoefficiens USDA 110, B. diazoefficiens USDA 110) to investigate the association between soil organic matter chemodiversity and stimulation of polychlorinated biphenyl (PCB) degradation. Results indicated that the high-aromatic solid organic matter (SOM) inhibited PCB bioavailability, and lignin-dominant dissolved organic matter (DOM) with high biotransformation potential was a favored substrate for all PCB degraders, which led to no stimulation of PCB degradation in MS. Differently, high-aliphatic SOM in US and IS promoted PCB bioavailability. The high/low biotransformation potential of multiple DOM components (e.g., lignin, condensed hydrocarbon, unsaturated hydrocarbon, etc.) in US/IS further resulted to the enhanced PCB degradation by B. diazoefficiens USDA 110 (up to 30.34%) /all PCB degraders (up to 17.65%), respectively. Overall, the category and biotransformation potential of DOM components and the aromaticity of SOM collaboratively determine the stimulation of GO-assisted bacterial agent on PCB degradation.

Risk source identification and diffusion trends of metal(loid)s in stream sediments from an abandoned arsenic-containing mine

Stream sediments from mine area are a converging source of water and soil pollution. The risk and development trends of metal(loid)s pollution in sediments from an abandoned arsenic-containing mine were studied using modelling techniques. The results showed that the combined techniques of geographic information system (GIS), random forest (RF), and numerical simulation (NS) could identify risk sources and diffusion trends of metal(loid)s in mine sediments. The median values of As, Cd, Hg, and Sb in sediments were 5.01, 3.02, 5.67, and 3.20 times of the background values of stream sediments in China, respectively. As (14.09%) and Hg (18.64%) pollution in mine stream sediments were severe while As is the main potential risk source with a strong spatial correlation. High-risk blocks were concentrated in the landfill area, with the surrounding pollution shows a decreasing trend of "step-type" pollution. The risk correlation between Hg and As (55.37%) in the landfill area is high. As a case of arsenic, the diffusion capacity of As within 500m is strong and stabilizes at 1 km when driven by the flows of 0.05, 0.5, and 5 m³/s, respectively. With the worst-case scenario flow (86 m³/s), it would take only 147 days for the waters within 3 km to become highly polluted. The high pollution levels in a stream under forecast of different distance intervals (500, 1500, 2000 m) within 6.5 km is arrived at approximate 344, 357, and 384 days, respectively. The study suggested the combined technique of GIS, RF, and NS can serve the risk source identification of contaminated sites and risk forecast of toxic element diffusion in emergency situations.

Therapeutic Efficiency of Humic Acids in Intoxications

Humins, humic and fulvic acids represent molecules with complex structures. These compounds comprising humic substances (HS) exist naturally in soil, brown coal, peat, and water. They are formed during the decomposition and transformation of organic matter (animal and plant remains) and their formation explains several theories. Within their chemical structures, there are numerous phenolic and carboxyl groups and their derivatives that affect their different properties, such as their solubility in water or their absorption of cations or mycotoxins. The manifold chemical structure of HS alters their polyelectrolyte character and thus their chelating efficiency. For many years, HS have been studied due to their detoxification, anti-, and pro-inflammatory or anticancer and antiviral ability. This article summarizes the antioxidant and adsorption properties of humic acids, highlighting their usefulness in intoxications.

Natural nanocolloids regulate the fate and phytotoxicity of hematite particles in water

Hematite (the most abundant iron oxide polymorph) is widely detected in the water environment and has attracted considerable attention. Natural nanocolloids (Ncs) exist ubiquitously in surface waters and play critical roles in biogeochemical processes. However, the influences of Ncs on the fate and phytotoxicity of hematite remain unknown. In this study, the infrared absorption spectra coupled with two-dimensional correlation spectroscopy analysis reveal that the specific binding interactions between Ncs and hematite primarily occur via hydrophilic effects and π-π interactions with an increase in the Ncs contact time. Moreover, binding with Ncs slightly promoted the aggregation rates of hematite particles in the BG-11 medium. Interestingly, Ncs remarkably mitigate the phytotoxicity (e.g., growth inhibition, oxidative stress, and mitochondrial toxicity) of nanosized and submicrosized hematite particles to Chlorella vulgaris after a 96 h exposure. The integrating metabolomic and transcriptomic analysis reveals that the regulated urea cycle, amino acids, and fatty acid-related metabolites (e.g., urea, serine, glutamate, and hexadecenoic acid) and genes (e.g., ACY1, CysC, and GLA) contribute to persistent phytotoxicity. This study provides new insights into the roles and mechanisms of natural Ncs in regulating the environmental risk of iron oxide minerals in aqueous media.

Experimental evaluation of the influence of combined particle size pretreatment and Fe3O4 additive on fuel yields of Arachis Hypogea shells

A smart energy recovery process can achieve maximum energy recovery from organic wastes. Pretreatment of feedstock is essential to biogas and methane yields during the anaerobic digestion process. This work combined particle size reduction with Fe₃O₄ nanoparticles to investigate their influence on biogas and methane yields from anaerobic digestion of Arachis hypogea shells. Twenty milligrams per litre of Fe₃O₄ nanoparticles was implemented with 2, 4, 6 and 8 mm particle sizes and a single treatment of Fe₃O₄ for 35 days. The treatments were compared with each other and were discovered to significantly (p < 0.05) enhance biogas yield by 37.40%, 50.10%, 54.40%, 51.40% and 35.50% compared with control, respectively. Specific biogas yield recorded was 966.2, 1406, 1552.7, 1317.4, 766.2 and 413 mL g^-1 volatile solid. This study showed the combination of Fe₃O₄ with 6 mm particle size of Arachis hypogea shells produced the optimum biogas and methane yields. The addition of Fe3O4 to particle sizes below 6 mm resulted in over-accumulation of volatile fatty acids and lowered the gas yield. This can be applied on an industrial scale.

Humic Acids Preparation, Characterization, and Their Potential Adsorption Capacity for Aflatoxin B1 in an In Vitro Poultry Digestive Model

Vermicompost was used for humic acid (HA) preparation, and the adsorption of aflatoxin B₁ (AFB₁) was investigated. Two forms of HA were evaluated, natural HA and sodium-free HA (SFHA). As a reference, a non-commercial zeolitic material was employed. The adsorbents were characterized by attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), energy-dispersive X-ray spectroscopy (EDS), zeta potential (ζ-potential), scanning electron microscopy (SEM), and point of zero charge (pHpzc). The adsorbent capacity of the materials when added to an AFB₁-contaminated diet (100 µg AFB₁/kg) was evaluated using an in vitro model that simulates the digestive tract of chickens. Characterization results revealed the primary functional groups in HA and SFHA were carboxyl and phenol. Furthermore, adsorbents have a highly negative ζ-potential at the three simulated pH values. Therefore, it appears the main influencing factors for AFB₁ adsorption are electrostatic interactions and hydrogen bonding. Moreover, the bioavailability of AFB₁ in the intestinal section was dramatically decreased when sorbents were added to the diet (0.2%, w/w). The highest AFB₁ adsorption percentages using HA and SFHA were 97.6% and 99.7%, respectively. The zeolitic material had a considerable adsorption (81.5%). From these results, it can be concluded that HA and SFHA from vermicompost could be used as potential adsorbents to remove AFB₁ from contaminated feeds.

High PCBs mineralization capability of a resuscitated strain Bacillus sp. LS1 and its survival in PCB-contaminated soil

Polychlorinated biphenyl (PCB)-degrading strains resuscitated by resuscitation promoting factor (Rpf) enlarged pure degraders to screen effective bio-inoculants for soil bioaugmentation. In this study, whole-genome analysis and PCB-degrading performance of a resuscitated strain LS1 were investigated. Importantly, the persistence and the physiological response of soil-inoculated LS1 were checked. The results indicate that the Bacillus sp. strain LS1 possessed the potential to degrade polycyclic aromatic compounds. LS1 exhibited better performance in degrading PCBs 18 and 52, but lower PCB 77 degradation capability. At PCBs concentration of 10 mg/L, the degradation efficiencies of PCBs 18, 52 and 77 within 96 h were 62.8 %, 59.6 % and 39.8 %, respectively. Combined the bph genes and metabolites detected, as well as the genes found in the genome, the abilities of LS1 for oxidative dehalogenation and mineralization of PCBs via HOPDA-benzoate-protocatechuate-β-ketoadipate pathway were determined. Notably, LS1 can still maintain survival and culturable state after inoculation into PCB-contaminated soil for 70 days. This is the first report to demonstrate the fate of resuscitated strain when used as soil bio-inoculant, which revealed the necessity and feasibility of using resuscitated strains to enhance bioremediation of PCB-contaminated soils.

Cyanidin-3-O-glucoside mediated photodegradation of profenofos in water

Flavonoids can sensitize and quench the photolysis of pesticides such as profenofos in surface water. Profenofos has been frequently detected in surface and underground water. The present study investigated the photolysis of profenofos under various conditions, including natural and artificial light illumination, with and without cyanidin-3-O-glucoside (Cy3G) and in pure and surface water. The degradation half-lives of profenofos in distilled water with 10 equivalents Cy3G of profenofos were 21.7 min, 9.5 h, 12.5 h and 180 h under high-pressure mercury light, UV, Xenon lamp and solar irradiation, respectively, while those without Cy3G were 8.1 min, 6.1 h, 8.2 h and 89.9 h, respectively. The photolysis rate of profenofos under sunlight and artificial light was reduced by 1.5-2.7 times due to Cy3G, compared to the Cy3G-free control. Under sunlight irradiation, the effects of Cy3G on profenofos photolysis were larger than those under high-pressure mercury lamp irradiation. Cy3G also significantly reduced the photolysis rate of profenofos under different pH conditions and in natural water. In addition, Cy3G exhibited a significant capacity of scavenging hydroxyl radicals and quenching ¹O₂ in water. The effect of Cy3G on profenofos photolysis was demonstrated through their interrelations in the natural environment. These findings can help understanding of the effect of flavonoids on profenofos photolysis and are of significance for predicting the degradation kinetics of profenofos and accurately assessing its potential biological impacts.

The impact of chlorination on the tetracycline sorption behavior of microplastics in aqueous solution

Considering the large volumes of treated water and incomplete elimination of pollutants, wastewater treatment plants (WWTPs) remain a considerable source of microplastics (MPs). Chlorine, the most frequently used disinfectant in WWTPs, has a strong oxidizing impact on MPs. However, little is documented, to date, about the impact of chlorination on the transformation of MPs and the subsequent environmental behaviors of the chlorinated MPs when released into the aquatic environment. This study explored the response of the physicochemical properties of specific thermoplastics, namely polyurethane (TPU) MPs and polystyrene (PS) MPs, to chlorination and their emerging pollutant [tetracycline (TC)] adsorption behavior in aqueous solution. The results indicated that the O/C ratio of the MP surface did not significantly change, and that there were increases in the O-containing functional groups of the TPU and PS MPs, after chlorination. The surface area of the chlorinated TPU MPs increased by 45 %, and that of the chlorinated PS increased by 21 %, compared with the pristine ones, which contributed to the TC adsorption. The adsorption isotherm fitting parameters suggested that the chlorinated TPU fitted the multilayer adsorption, and the chlorinated PS was inclined to the monolayer adsorption. The relative abundance of the O-containing functional groups, on the TPU surface, led to the release of CHCl₃ molecules, and the clear surface irregularities and fissures occurred after chlorine treatment. No fissures were found on the surface of the chlorinated PS MPs. The hydrophobicity and electrostatic adsorption were proved to be the major impacts on the TC adsorption of the chlorinated MPs, and the subsequently formed hydrogen bonds led to the stronger adsorption capacity of the chlorinated TPU than the chlorinated PS MPs.

Glucose Incorporated Graphite Matrix for Electroanalysis of Trimethoprim

The antibiotic drug trimethoprim (TMP) is used to treat bacterial infections in humans and animals, and frequently TMP is used along with sulfonamides. However, a large portion of TMP is excreted in its active state, which poses a severe problem to humans and the environment. A sensitive, rapid, cost-effective analytical tool is required to monitor the TMP concentration in biological and environmental samples. Hence, this study proposed an analytical methodology to analyze TMP in clinical, biological and environmental samples. The investigations were carried out using a glucose-modified carbon paste electrode (G-CPE) employing voltammetric techniques. Electrochemical behavior was examined with 0.5 mM TMP solution at optimum pH 3.4 (Phosphate Buffer Solution, I = 0.2 M). The influence of scan rate on the electro-oxidation of TMP was studied within the range of 0.05 to 0.55 V/s. The effect of pH and scan rate variations revealed proton transfer during oxidation. Moreover, diffusion phenomena governed the irreversibility of the electrode reaction. A probable and suitable electrode interaction and reaction mechanism was proposed for the electrochemical oxidation of TMP. Further, the TMP was quantitatively estimated with the differential pulse voltammetry (DPV) technique in the concentration range from 9.0 × 10^-7 to 1.0 × 10^-4 M. The tablet, spiked water and urine analysis demonstrated that the selected method and developed electrode were rapid, simple, sensitive, and cost-effective.

Enhancing bioelectrochemical performance of two-dimensional material attached by covalent/metal organic frameworks as cathode catalyst for microbial fuel cells

In this study, covalent/metal organic framework and two-dimensional material (COF-300/ZIF-8@Ti₃AlC₂) were composited by a three-step distributed feed method for cathode catalyst in microbial fuel cells (MFCs). The growth of irregular cube-like COF-300/ZIF-8 on the Ti₃AlC₂ substrate was observed. Al, Zn, Ti, N, C and O elements were observed uniformly and more active sites were offered through it. The external output voltage of COF-300/ZIF-8@Ti₃AlC₂-MFC was 576 mV and this could be almost unchanged for 9 days. The external output power density was 587.01 mW/m², and that was 1.25 times of COF-300@Ti₃AlC₂-MFC (469.30 mW/m²) and 1.67 times of COF-300/ZIF-8-MFC (352.09 mW/m²). Ti₃AlC₂ enhanced the electrical conductivity of the composite by its rich surface functional groups and much more surface active sites. COF-300/ZIF-8 mixture improved the instability and disorder of the monomer. This study would supply technical support for the expanded request of composite materials in microbial electrochemistry.

Biochar-supported nZVI for the removal of Cr(VI) from soil and water: Advances in experimental research and engineering applications

Over the past decade, biochar-supported nZVI composites (nZVI/biochar) have been developed and applied to treat various pollutants due to their excellent physical and chemical properties, especially in the field of chromium (VI) removal. This paper reviewed the factors influencing the preparation and experiments of nZVI/biochar composites, optimization methods, column experimental studies and the mechanism of Cr(VI) removal. The results showed that the difference in raw materials and preparation temperature led to the difference in functional groups and electron transfer capabilities of nZVI/biochar materials. In the experimental process, pH and test temperature can affect the surface chemical properties of materials and involve the electron transfer efficiency. Elemental doping and microbial coupling can effectively improve the performance of nZVI/biochar composites. In conclusion, biochar can stabilize nZVI and enhance electron transfer in nZVI/biochar materials, enabling the composite materials to remove Cr(VI) efficiently. The study of column experiments provides a theoretical basis for applying nZVI/biochar composites in engineering. Finally, the future work prospects of nZVI/biochar composites for heavy metal removal are introduced, and the main challenges and further research directions are proposed.

Pinecone-derived magnetic porous hydrochar co-activated by KHCO3 and K2FeO4 for Cr(VI) and anthracene removal from water

Herein, magnetic porous pinecone-derived hydrochar (MPHC_MW) co-activated by KHCO₃ and K₂FeO₄ through one-step microwave-assisted pyrolysis was innovatively synthesized for hexavalent chromium (Cr(VI)) and anthracene (ANT) removal from water. The analyses of characterization consequences and co-activation mechanisms not merely proved the high specific surface area (703.97 m²/g) and remarkable microporous structures of MPHC_MW caused by the synergistic chemical activation of KHCO₃ and K₂FeO₄, but also testified successful loading of Fe⁰ and Fe₃O₄ on MPHC_MW by the process of carbothermal reduction between K₂FeO₄ and carbon matrix of hydrochar. The resultant MPHC_MW possessed pH-dependence for Cr(VI), while adsorption for ANT was hardly impacted by the pH of solution. Moreover, the adsorption processes of MPHC_MW could attain equilibrium within 60 min for Cr(VI) and 30 min for ANT with multiple kinetics, and the corresponding adsorption capacity for Cr(VI) and ANT was 128.15 and 60.70 mg/g, respectively. Additionally, the adsorption percentages of MPBC_MW for Cr(VI)/ANT was maintained at 87.87/82.64% after three times of adsorption-desorption cycles. Furthermore, pore filling, complexation, electrostatic interaction, reduction and ion exchange were testified to enhance the removal of Cr(VI), while the ANT removal was achieved via π-π stacking, complexation, pore filling and hydrogen bonding force.

Two-step ball milling-assisted synthesis of N-doped biochar loaded with ferrous sulfide for enhanced adsorptive removal of Cr(Ⅵ) and tetracycline from water

Nitrogen-doped biochar loaded with FeS (FeS@NBC_BM) was synthesized by two-step ball milling processes. Characterization results revealed that N-doping process successfully introduced pyridinic, pyrrolic, and graphitic N structures, and FeS was subsequently embedded in N-doped biochar (NBC_BM). The resultant FeS@NBC_BM presented predominant adsorption capacity for Cr(VI) (194.69 mg/g) and tetracycline (TC, 371.29 mg/g) compared with BC (27.28 and 37.89 mg/g) and NBC_BM (71.26 and 81.26 mg/g). In addition, the Cr(VI)/TC elimination process by FeS@NBC_BM was basically stable with multiple co-existing ions with slight decrease on adsorption performance after three desorption-regeneration cycles. Most importantly, FeS@NBC_BM was found to achieve Cr(VI) elimination not only by electrostatic attraction, ion exchange and complexation, but also by electrons-triggered reduction provided by different species of N, Fe²⁺ as well as S(Ⅱ). Meantime, pore filling, hydrogen bonding, and π-π stacking interactions were demonstrated to contribute to TC adsorption. These results suggested the co-modification of N-doping and FeS loading by ball milling as an innovative decorating method for biochar to adsorptive purification of Cr(VI) and TC-contaminated water.

Influence of protein configuration on aggregation kinetics of nanoplastics in aquatic environment

Aggregation kinetics of nanoplastics in aquatic environment are influenced by their interactions with proteins having different structures and properties. This study employed time-resolved dynamic light scattering (TR-DLS) to investigate the effects of 5 proteins (bovine hemoglobin (BHb), bovine (BSA) and human serum albumin (HSA), collagen type I (Col I), and bovine casein (CS)) on aggregation kinetics of polystyrene nanoplastics (PSNPs) under natural water conditions, which were simulated using various ionic strength (1-1000 mM NaCl and 0.01-100 mM CaCl₂), pH (3-9), and protein concentration (1-5 mg/L of total organic carbon). The results indicated that the interactions between proteins and PSNPs strongly depended on electrostatic properties, protein structures, and solution chemistries, which induced distinct aggregation behaviors in NaCl and CaCl₂ solutions. Electrostatic repulsion and steric hindrance dominated their interactions in NaCl solution by stabilizing PSNPs with the order of spherical BSA and disordered CS > heart-shaped HSA > fibrillar Col I; whereas positively charged BHb destabilized PSNPs with aggregation rate of 1.71 nm/s at 300 mM NaCl. In contrast, at CaCl₂ concentration below 20 mM, proteins destabilized PSNPs following the sequence of HSA > BHb > Col I > BSA depending on counterbalance among double layer compression, cation bridging, and steric hindrance; whereas CS stabilized PSNPs by precipitating Ca²⁺ that inhibited charge screening effect. Both protein concentration and solution pH affected protein corona formation, surface charge, and protein structure that altered stability of PSNPs. Characterizations using fluorescence spectroscopy, circular dichroism, and two-dimensional correlation analysis spectroscopy showed fluorescence quenching and ellipticity reduction of proteins, indicating strong adsorption affinity between PSNPs and proteins. The study provides insight to how protein configuration and water chemistry affect fate and transport of nanoplastics in aquatic environment.

Effects of microplastics on DBPs formation under the chlorination of natural organic matters

Microplastics have attracted extensive attention and concern because they inflict damage on human beings and the environment. When the microplastics enter the water system, they inevitably flow into the water treatment system and encounter disinfectants during the disinfection procedure. Chlorine can react with microplastics to form different kinds of disinfection byproducts (DBPs). O-containing functional groups on the surface of microplastics may play a major role in DBP formation. Without O-containing functional groups, microplastics can also form DBPs but with totally different mechanisms. Reactive oxygen species (ROS, i.e., •OH) and reactive chlorine substances (RCS, i.e., Cl• and ClO•) may attack the microplastics and form DBP precursors. With relatively low surface area and very little pore volume, microplastics cannot affect the DBP formation between Suwannee River fulvic acid (SRFA) and chlorine. When SRFA exists, microplastics with few O-containing functional groups can hardly form DBPs because of the inhibition of ROS and RCS.

Quantitative structure-activity relationship for the oxidation of organic contaminants by peracetic acid using GA-MLR method

Peracetic acid (PAA) is considered as an effective and powerful oxidant for eliminating organic contaminants in wastewater treatment. The second-order rate constant (k_app) for the reaction of PAA with organic contaminants is practically important for evaluating their removal efficiency in wastewater treatment, but only limited numbers of k_app values are available. In this study, 70 organic compounds with various structures were selected, and the k_app of PAA with each organic compound was used to develop two quantitative structure-activity relationship (QSAR) models based on three kinds of descriptors including constitutional, quantum chemical, and the PaDEL descriptors. The genetic algorithm (GA) was applied to select the molecular descriptors, then the models developed by multiple linear regression (MLR). The most important descriptors that explain the reactivity of organic compounds with PAA are the E_HOMO for the model with the constitutional and quantum chemical descriptors. The maxHdsCH and minHdCH₂ are two most important descriptors for the model with only PaDEL descriptors. The developed models can be used to predict k_app for a wide range of organic contaminants. The accuracy of the developed models was proved by the internal, external validation and the Y-scrambling technique. The developed QSAR models using the GA-MLR method can be used as a screening tool for predicting the elimination of organic contaminants by PAA and increasing the understanding of chemical pollutant fate.

Improving oxygen reduction reaction of microbial fuel cell by titanium dioxide attaching to dual metal organic frameworks as cathode

In this study, a two-step simple distributed feeding method was used to prepare the core-shell nanocomposite dual metal organic frameworks (D-MOFs, TiO₂@ZIF-67/ZIF-8). There were three obvious peaks (011), (112), (222) interface in D-MOFs core, which fully showed that ZIF-67/ZIF-8 crystal core was successfully synthesized. The morphology of composite material was core-shell structure with a rough surface, and Ti, Co, Zn, Al were uniformly distributed on the surface. TiO₂@ZIF-67/ZIF-8 also had excellent electrochemical activity and the maximum power density of TiO₂@ZIF-67/ZIF-8 microbial fuel cell (MFC) was 341.506 mW/m², which was 1.30 times of ZIF-67/ZIF-8-MFC (262.144 mW/m²) and 2.07 times of ZIF-67-MFC (164.836 mW/m²). And the continuous output voltage of TiO₂@ZIF-67/ZIF-8-MFC was 413.43 mV, which could maintain stable voltage output for 8.3 days. D-MOFs as the core of composites ensured the integrity, stability and high activity of materials; Rough TiO₂ as the surface of the material provided surface area and reaction center.

Alkaline extract from vermicompost reduced the stress promoted by As on maize plants and increase their phytoextraction capacity

Arsenic (As) represents an environmental risk and phytoremediation has been identified as a good technique to recover contaminated soils. Plants defense mechanisms needed to be enhanced against As stress-promoting action by biostimulants such as humic materials. This work sought to determine the effectiveness of an alkaline vermicompost extract (AEV) and in mitigating stresses promoted by As in maize plants, increasing their potential use for phytoextraction. The AEV were extracted from vermicompost and two preliminary assays in Leonard pots were carried out: the first one to define the best AEV concentration-response dose and the second to point out the toxic As concentration. The second step was to set up a 28-day long experiment with the following four treatments: control, AEV, As, As + AEV. AEV attenuated As-induced stress in maize plants. Maize dry biomass was reduced in the As treatment and rebalanced to values similar to the control in the As + HS treatment while the plants treated only with HS showed the highest biomass among the treatments. The concentrations of P, Fe, Cu, Mn and Ni, and catalase (CAT), ascorbate peroxidase (APX) and superoxide dismutase (SOD) antioxidant activity increased in the As treatment and decreased in the As + AEV treatment. The rate of photosynthesis decreased, and the internal CO₂ concentration increased with stress induced by As, where both effects were attenuated by AEV. Our results show the positive effect of the AEV in alleviating As abiotic stress on maize growth, offering new options of employment of humic substances in phytoremediation process.

The detection and characterization techniques for the interaction between graphene oxide and natural colloids: A review

The high dispersibility of graphene oxide (GO) and the universality of natural colloids (clay minerals, (hydr)oxides of Al, Fe, silica, etc.) make them interact easily. Many kinds of analytical methods have been used to study the interaction between GO and natural colloids. This review provides a comprehensive overview of analytical methods for the detection and quantification of interaction process. We highlighted the influence of the most relevant environmental factors (ionic strength, pH, etc.) on batch experiment, quartz crystal microbalance with dissipation monitoring measurements, and column experiments. Besides, the benefits and drawbacks of spectroscopic, microscopic techniques, theoretical models, calculation and time-resolved dynamic light scattering methods also have discussed in this work. This review can give some guidance to researchers in their selection and combination of the technique for the research of the interaction between GO and natural colloids.

Rapid and sensitive detection of Staphylococcus aureus using biolayer interferometry technology combined with phage lysin LysGH15

Staphylococcus aureus (S. aureus), considered as a common foodborne pathogenic microorganism, usually causes food poisoning and various infectious diseases. Therefore, development of rapid and accurate bacterial detection method is the key to preventing food poisoning and achieving early diagnosis and treatment of various infectious diseases caused by S. aureus. Biolayer interferometry (BLI) technology is a novel technique of label-free optical analysis for real-time monitoring of biomolecular interactions. The C54A mutation induced the lytic activity loss of phage lysin LysGH15 but retained the capacity for specific recognizing and binding S. aureus. In this study, a novel method for the detection of S. aureus was established using the C54A mutant LysGH15 as the receptor in combination with BLI. Using this BLI-based method, S. aureus whole cells could be directly assayed and the limit of detection was 13 CFU/mL with a binding time of 12 min. Because the C54A mutant LysGH15 recognizes S. aureus with very high specificity, the method can exclude potential interference from other bacterial species. In addition, this method could also distinguish between viable and dead S. aureus. Moreover, S. aureus was successfully detected in ice cubes and light soy sauce by using this method. Collectively, these results indicate that the LysGH15-based BLI method can be used as an efficient and reliable diagnostic tool in the field of food safety and other related fields for the rapid, sensitive, label-free, and real-time detection of S. aureus.

Benzo[a]pyrene and heavy metal ion adsorption on nanoplastics regulated by humic acid: Cooperation/competition mechanisms revealed by molecular dynamics simulations

Nanoplastics adsorb pollutants and organic matter to aggravate or alleviate impact to the eco-environment and human health. However, the interaction mechanisms remain unclear and difficult to study using current experimental techniques. By means of molecular dynamics simulation, here we investigate adsorption of benzo[a]pyrene (BaP) and heavy metal ions (Cu²⁺) on nanoplastics of different materials and surface charges regulated by humic acid (HA). Among considered materials, polystyrene shows the highest capacity of adsorbing BaPs via forming sandwiched π-stacking structures with benzene rings. Driven by hydrophobic, electrostatic and hydrogen bonding interactions, HAs spontaneously aggregate into micelle-like structures with hydrophobic core and charged exterior accessible to BaPs and Cu²⁺, respectively. Cationic and neutral nanoplastics adsorb more HAs to form eco-coronas, which modulate BaP and Cu²⁺ adsorption via following cooperation/competition mechanisms. On one hand, the direct binding of BaPs to nanoplastics is hindered by HAs through BaP encapsulation plus competitive adsorption. On the other hand, adsorbed HAs expose carboxyl groups to offer rich binding sites to promote Cu²⁺ adsorption on neutral and cationic nanoplastics, while unbound HAs compete with anionic nanoplastics to inhibit Cu²⁺ adsorption. These results provide molecular level insights into transport, transformation and accessibility of nanoplastics with coexisting contaminants in the aqueous environment.

Cleanup of arsenic, cadmium, and lead in the soil from a smelting site using N,N-bis(carboxymethyl)-L-glutamic acid combined with ascorbic acid: A lab-scale experiment

Chemical washing has been carried out to remediate soil contaminated with heavy metals. In this study, the appropriate washing conditions for N,N-bis(carboxymethyl)-L-glutamic acid (GLDA) combined with ascorbic acid were determined to remove As, Cd, and Pb in the soil from the smelting site. The mechanism of heavy metal removal by the washing agent was also clarified. The results showed that heavy metals in the soil from the smelting site can be effectively removed. The removal percentages of As, Cd, and Pb in the soil from the smelting site were found to be 34.49%, 63.26%, and 62.93%, respectively, under optimal conditions (GLDA and ascorbic acid concentration ratio of 5:20, pH of 3, washing for 60 min, and the liquid-to-solid ratio of 10). GLDA combined with ascorbic acid efficiently removes As, Cd, and Pb from the soil through synergistic proton obstruction, chelation, and reduction. GLDA can chelate with iron and aluminum oxides while directly chelate with Cd and Pb. Ascorbic acid can reduce both Fe(III) to Fe(II) and As(III) to As⁰. The dissolution of As was promoted by indirectly preempting the binding sites of iron and aluminum in the soil while those of Cd and Pb were improved by directly interrupting the binding sites. This study suggested that GLDA combined with ascorbic acid is an effective cleanup technology to remove As, Cd, and Pb simultaneously from contaminated smelting site soils.

Development of a novel pyrite/biochar composite (BM-FeS2@BC) by ball milling for aqueous Cr(VI) removal and its mechanisms

As a natural reduction mineral, pyrite (FeS₂), was combined with biochar by simply ball milling technology to synthesize FeS₂@biochar composite (BM-FeS₂@BC) and applied for the removal of hexavalent chromium (Cr(VI)) in aqueous solution. SEM, XRD, FTIR, and XPS characterization results showed that the FeS₂ and biochar were successfully combined and biochar suppressed the agglomeration of FeS₂. Batch sorption experiments showed that the BM-FeS₂@BC700 composite (mass ratio of FeS₂-to-biochar = 3:1) had enhanced Cr(VI) removal capacity of 134 mg·g^-1, which were 3-25 times higher than those of the corresponding pristine and ball-milled biochar and FeS₂. The removal of Cr(VI) by BM-FeS₂@BC700 was dosage and pH dependent. The addition of oxalic acid (OA) exhibited a promotion effect on the removal of Cr(VI) by increasing the removal rate of Cr(VI) from 56% to 100%. Reduction, adsorption, and surface complexation were the dominate mechanisms for Cr(VI) removal by BM-FeS₂@BC700. At the equilibrium Cr(VI) concentration of 15.7 mg·L^-1, 92.25% of Cr(VI) was removed through reduction/precipitation and 8.75% was removed by adsorption/surface complexation. The fitting results of the Langmuir model proved that the removal of Cr(VI) by BM-FeS₂@BC700 composite was chemical surface monolayer adsorption. This work demonstrates the potential of ball milling for the preparation of FeS₂@BC composite to remove Cr(VI) from water and wastewater.

In vitro biolayer interferometry analysis of acetylcholinesterase as a potential target of aryl-organophosphorus flame-retardants

Organophosphorus flame retardants (OPFRs) have been implicated as neurotoxicants, but their potential neurotoxicity and mechanisms remain poorly understood. Herein, we investigated the neurotoxicity of selected OPFRs using zebrafish as a model organism. Environmentally relevant concentrations (3-1500 nM) of three classes of OPFRs (aryl-OPFRs, chlorinated-OPFRs, and alkyl-OPFRs) were tested in zebrafish larvae (2-144 h post-fertilisation) alongside the neurotoxic chemical chlorpyrifos (CPF) that inhibits acetylcholinesterase (AChE). Exposure to aryl-OPFRs and CPF inhibited AChE activities, while chlorinated- and alkyl-OPFRs did not inhibit these enzymes. Biolayer interferometry (BLI) was used to probe interactions between OPFRs and AChE. The association and dissociation response curves showed that, like CPF, all three selected aryl-OPFRs, triphenyl phosphate (TPHP), tricresyl phosphate (TCP) and cresyl diphenyl phosphate (CDP), bound directly to AChE. The affinity constant (K_D) for TPHP, TCP, CDP and CPF was 2.18 × 10^-4, 5.47 × 10^-5, 1.05 × 10^-4 and 1.70 × 10^-5 M, respectively. In addition, molecular docking revealed that TPHP, TCP, CDP and CPF bound to AChE with glide scores of - 7.8, - 8.3, - 8.1 and - 7.3, respectively. Furthermore, the calculated binding affinity between OPFRs and AChE correlated well with the K_D values measured by BLI. The present study revealed that aryl-OPFRs can act as potent AChE inhibitors, and may therefore present a significant ecological risk to aquatic organisms.

Characterization of dissolved organic matter for understanding the adsorption on nanomaterials in aquatic environment: A review

Nanomaterials (NMs) have received tremendous attention as emerging adsorbents for environmental applications. The ever-increasing release into aquatic systems and the potential use in water treatment processes heighten the likelihood of the interactions of NMs with aquatic dissolved organic matter (DOM). Once DOM is adsorbed on NMs, it substantially modifies the surface properties, thus altering the fate and transport of NMs, as well as their toxic effects on (micro)organisms in natural and engineered systems. The environmental consequences of DOM-NMs interaction have been widely studied in the literature. In contrast, a comprehensive understanding of DOM-NM complexes, particularly regarding the controlling factors, is still lacking, and its significance has been largely overlooked. This gap in the knowledge mainly arises from the complex and heterogeneous structures of the DOM, which prompts the urgent need to further characterize the DOM properties to deepen the understanding associated with the adsorption processes on NMs. This review aims to provide in-depth insights into the complex DOM adsorption behavior onto NMs, whether they are metal- or carbon-based materials. First, we summarize the up-to-date analytical methods to characterize the DOM to unravel the underlying adsorption mechanisms. Second, the key DOM characteristics governing the adsorption processes are discussed. Next, the environmental factors, such as the nature of adsorbents and solution chemistry, affecting the DOM-NM interactions, are identified and discussed. Finally, future studies are recommended to fully understand the chemical traits of DOM upon its adsorption onto NMs.

Arsenate phytotoxicity regulation by humic acid and related metabolic mechanisms

The use of irrigation water containing arsenic (As) had led to large areas of As-contaminated farmland, and as a result, plants and food have become severely poisoned. Humic acid (HA) can be complexed with metals, which in turn affects the metals' behavior. Herein, we explored the accumulation of arsenate in lettuce treated with different concentrations of arsenate and studied the effects of HA on the accumulation and toxicity of arsenate. The addition of HA did not cause significant changes in the arsenate content in lettuce but had a significant effect on the activity of antioxidant enzymes, which improved the antioxidant capability of the lettuce plants. Furthermore, HA promoted the accumulation of nutrients, such as magnesium (Mg), calcium (Ca), molybdenum (Mo) and manganese (Mn), in the leaves. Arsenate disrupted metabolic pathways, such as amino acid metabolism, carbohydrate metabolism, and aminoacyl-tRNA biosynthesis. The addition of HA increased the contents of amino acids and sugars, thereby improving lettuce growth. The present study explored the effects of HA on As accumulation and related physiological changes (antioxidant enzyme activities, absorption of nutrients and metabolic mechanisms) and provided insights into the regulation of As contamination by HA, which is relatively inexpensive.

A DFT study of fulvic acid binding with bivalent metals: Cd, Cu, Mg, Ni, Pb, Zn

3,7,8-Trihydroxy-3-methyl-10-oxo-4,10-dihydro-1H,3H-pyrano [4,3-b]chromene-9-carboxylic acid is a structurally well-characterized fulvic acid (FA) capable to act as a polyfunctional bidentate ligand in the complexes with metal ions. Investigations of the formation mechanisms and structure of the above-mentioned FA complexes with bivalent metals [Cd(II), Cu(II), Mg(II), Ni(II), Pb(II) and Zn(II)] are presently an actual and trending topic in the modern chemistry of humic and fulvic acids. Furthermore, the importance of the theoretical DFT investigations of binding of metals with fulvic acids is stipulated by the lack of the relevant experimental structural data for such complexes. The quantum chemical calculations have shown that, of the four possible FA tautomers, the two FA forms are more stable. The wavefunction analysis and computed reactivity descriptors (electrostatic potential, Hirshfeld surface analysis, natural population analysis charges, and condensed Fukui indexes) give the insight on the properties and reactive ability of these two different forms of the FA. The computed thermochemical parameters of the ion-exchange reaction explain the metal binding affinity and selectivity of the FA forms.

Reciprocal interference of clay minerals and nanoparticulate zero-valent iron on their interfacial interaction with dissolved organic matter

With increasing environmental application of nanoparticulate zero-valent iron (nZVI), it is essential to explore the interaction of nZVI with dissolved organic matter (DOM) and clay mineral particles (CMPs) and its potential effect on the formation of DOM-mineral complex that may impact the carbon sequestration. The aggregation and adsorption behaviors of nZVIs (two bare nZVIs of different sizes and one carboxymethyl cellulose coated nZVI (CMC-nZVI)) and CMPs (kaolinite and montmorillonite) coexisting in DOM (humic acid and fulvic acid) solutions were systematically investigated. The bare nZVIs more easily formed heteroaggregates with montmorillonite than kaolinite in DOM solutions, while the CMC-nZVI tended to attach on kaolinite surface. The heteroaggregation and competition between nZVIs and CMPs could change their interfacial interaction with DOM and the ultimate immobilization of DOM was determined by the formed nZVI-CMP complexes, irrelevant to the addition sequence of nZVIs and CMPs. Compared with the individual CMPs alone, the formed bare-nZVIs-CMP heteroaggregates promoted the sequestration of DOM especially its aromatic carbon fractions, while the CMC-nZVI had no such effect. These findings will be helpful for the understanding of nZVI interaction with DOM and CMPs and the effect on the immobilization of organic carbon in the environment.

The importance of aromaticity to describe the interactions of organic matter with carbonaceous materials depends on molecular weight and sorbent geometry

Dissolved organic matter (DOM) is ubiquitous in aquatic environments where it interacts with a variety of particles including carbonaceous materials (CMs). The complexity of both DOM and the CMs makes DOM-CM interactions difficult to predict. In this study we have identified the preferential sorption of specific DOM fractions as being dependent on their aromaticity and molecular weight, as well as on the surface properties of the CMs. This was achieved by conducting sorption batch experiments with three types of DOM (humic acid, Suwannee River natural organic matter, and a compost extract) and three types of CMs (graphite, carbon nanotubes, and biochar) with different geometries and surface complexities. The non-adsorbed DOM fraction was analyzed by size exclusion chromatography and preferentially sorbed molecular weight fractions were analyzed by UV/vis and fluorescence spectroscopy. All three sorbent types were found to preferentially sorb aromatic DOM fractions, but DOM fractionation depended on the particular combination of sorbent and sorbate characteristics. Single-walled carbon nanotubes only sorbed the smaller molecular weight fractions (<1 kDa). The sorption of smaller DOM fractions was not accompanied by a preference for less aromatic compounds, contrary to what was suggested in previous studies. While graphite preferentially sorbed the most aromatic DOM fraction (1-3 kDa), the structural heterogeneity of biochar resulted in reduced selectivity, sorbing all DOM > 1 kDa. The results explain the lack of correlation found in previous studies between the amount of aromatic carbon in a bulk DOM and its sorption coefficient. DOM sorption by CMs was generally controlled by DOM aromaticity but complex sorbent surfaces with high porosity, curvatures and functional groups strongly reduced the importance of aromaticity.

Natural Organic Matter (NOM) Imparts Molecular-Weight-Dependent Steric Stabilization or Electrostatic Destabilization to Ferrihydrite Nanoparticles

Ferrihydrite nanoparticles (Fh NPs) are ubiquitous in natural environments. However, their colloidal stability, and fate and transport behavior are difficult to predict in the presence of heterogeneous natural organic matter (NOM) mixtures. Here, we investigated the adsorption and aggregation behavior of Fh NPs exposed to NOM fractions with different molecular weights (MW). The NOM fraction with MW < 3 kDa destabilized the NPs, resulting in accelerated aggregation even at high C/Fe mass ratios, whereas higher MW NOM fractions imparted better colloidal stability with increasing MW and C/Fe ratio. Despite differences in the functional group composition of the bulk (dissolved) NOM fractions, all NOM fractions produced similar adsorbed layer compositions on the NPs, suggesting minimal contribution of chemical properties to the distinctive aggregation behavior. Rather, the higher adsorbed mass and larger size of the higher MW fractions were key factors in stabilizing the NPs through steric repulsion, whereas the lowest MW fraction had low adsorbed mass and was unable to counter electrostatic patch-charge attraction when the NPs are positively charged. This mechanistic understanding helps us predict the transport and fate of Fh NPs and the associated contaminants in natural environments with varying NOM compositions.

The formation of PBDFs from the ortho-disubstituted phenol precursors: A comprehensive theoretical study on the PBDD/Fs formation from 2,4,6-tribromophenol

Bromophenols are known as direct precursors of the notorious polybrominated dibenzo-p-dioxin/dibenzofurans (PBDD/Fs). There is a long-held viewpoint that only the more toxic dioxin-type products could be formed from the ortho-disubstituted phenols, totally contrary to the experimental observations that both PBDDs and PBDFs are generated. To tackle the issue, the gaseous formation mechanism of PBDD/Fs from 2,4,6-tribromophenol (TBP), a typical ortho-disubstituted phenol, was investigated in this study. Firstly, the reactions between TBP and the active H radical produce three key radical species including the bromophenoxyl radical, the substituted phenyl radical and phenoxyl diradical. The self- and cross-combinations of these radical species and TBP yield not only the dioxin-type products 1,3,6,8-TeBDD and 1,3,7,9-TeBDD, but also the brominated dibenzofurans 1,3,6,8-TeBDF and 2,4,6,8-TeBDF. Notably, the reactions involving the phenyl C sites in the substituted phenyl and phenoxyl diradicals are demonstrated to be both thermodynamically and kinetically more favorable than those involving the bromophenoxyl radical and the TBP molecule. Most importantly, the findings of the present work are of great importance as it provides feasible pathways to form less toxic dibenzofuran-type products from the ortho-disubstituted phenols. These results will improve the understanding of the PBDD/Fs formation mechanism from phenol precursors.

Optimization of Antibacterial Efficacy of Noble-Metal-Based Core-Shell Nanostructures and Effect of Natural Organic Matter

Noble-metal-based nanomaterials made of less toxic metals have been utilized as potential antibacterial agents due to their distinctive oxidase-like activity. In this study, we fabricated core-shell structured Pd@Ir bimetallic nanomaterials with an ultrathin shell. Pd@Ir nanostructures show morphology-dependent bactericidal activity, in which Pd@Ir octahedra possessing higher oxidase-like activity exert bactericidal activity stronger than that of Pd@Ir cubes. Furthermore, our results reveal that the presence of natural organic matter influences the antibacterial behaviors of nanomaterials. Upon interaction with humic acid (HA), the Pd@Ir nanostructures induce an elevated level of reactive oxygen species, resulting in significantly enhanced bactericidal activity of the nanostructures. Mechanism analysis shows that the presence of HA efficiently enhances the oxidase-like activity of nanomaterials and promotes the cellular internalization of nanomaterials. We believe that the present study will not only demonstrate an effective strategy for improving the bactericidal activity of noble-metal-based nanomaterials but also provide an understanding of the antibacterial behavior of nanomaterials in the natural environment.