Selective Adsorption and Photocatalytic Degradation of Extracellular Antibiotic Resistance Genes by Molecularly-Imprinted Graphitic Carbon Nitride

How micro-/nano-plastics influence the horizontal transfer of antibiotic resistance genes - A review

Plastic debris such as microplastics (MPs) and nanoplastics (NPTs), along with antibiotic resistance genes (ARGs), are pervasive in the environment and are recognized as significant global health and ecological concerns. Micro-/nano-plastics (MNPs) have been demonstrated to favor the spread of ARGs by enhancing the frequency of horizontal gene transfer (HGT) through various pathways. This paper comprehensively and systematically reviews the current study with focus on the influence of plastics on the HGT of ARGs. The critical role of MNPs in the HGT of ARGs has been well illustrated in sewage sludge, livestock farms, constructed wetlands and landfill leachate. A summary of the performed HGT assay and the underlying mechanism of plastic-mediated transfer of ARGs is presented in the paper. MNPs could facilitate or inhibit HGT of ARGs, and their effects depend on the type, size, and concentration. This review provides a comprehensive insight into the effects of MNPs on the HGT of ARGs, and offers suggestions for further study. Further research should attempt to develop a standard HGT assay and focus on investigating the impact of different plastics, including the oligomers they released, under real environmental conditions on the HGT of ARGs.

Hydrophilic molecularly imprinted lysozyme-BiOBr composite with enhanced visible light utilization for selective removal of trace contaminants in water

The development of high-efficiency molecularly imprinted photocatalysts is still challenging due to the lack of hydrophilic and suitable functional monomers. In this work, the bio-sourced lysozyme was developed as the hydrophilic functional monomer, and Cu-doped BiOBr was used as the photocatalysts, to prepare a novel hydrophilic molecularly imprinted lysozyme-BiOBr composite (BiOBr-Cu/LyzMIP) with enhanced visible light utilization. Lysozyme could form a transparent layer to mitigate the light transmission obstruction caused by the surface imprinting layer, making it an ideal functional monomer. The prepared BiOBr-Cu/LyzMIP possessed red-shifted visible-light absorption edge and minor reduction of light absorbance, indicating the enhanced utilization of visible light. Accordingly, BiOBr-Cu/LyzMIP demonstrated excellent degradation rate (99.4 % in 20 min), exceptional degradation efficiency (0.211 min-1), and superior reusability. Moreover, BiOBr-Cu/LyzMIP exhibited rapid adsorption equilibrium (20 min), good imprinting factor (2.67), and favourable degradation selectivity (>1.75), indicating the good imprinting effect resulting from abundant functional groups of lysozyme. Versatility experiments on different templates suggested that the proposed approach allowed flexibility in selecting a wide range of hazardous contaminants according to practical requirements. The present work expands the application of lysozyme-based composites in the environmental field, and provides a new one-stop pathway for efficient and sustainable treatment of contaminated water.

Molecular level removal of antibiotic resistant bacteria and genes: A review of interfacial chemical in advanced oxidation processes

As a kind of novel and persistent environmental pollutants, antibiotic resistant bacteria (ARB) and antibiotic resistance genes (ARGs) have been frequently detected in different aquatic environment, posing potential risks to public health and ecosystems, resulting in a biosecurity issue that cannot be ignored. Therefore, in order to control the spread of antibiotic resistance in the environment, advanced oxidation technology (such as Fenton-like, photocatalysis, electrocatalysis) has become an effective weapon for inactivating and eliminating ARB and ARGs. However, in the process of advanced oxidation technology, studying and regulating catalytic active sites at the molecular level and studying the adsorption and surface oxidation reactions between catalysts and ARGs can achieve in-depth exploration of the mechanism of ARGs removal. This review systematically reveals the catalytic sites and related mechanisms of catalytic antagonistic genes in different advanced oxidation processes (AOPs) systems. We also summarize the removal mechanism of ARGs and how to reduce the spread of ARGs in the environment through combining a variety of characterization methods. Importantly, the potential of various catalysts for removing ARGs in practical applications has also been recognized, providing a promising approach for the deep purification of wastewater treatment plants.

Molecularly Imprinted Heterostructure-Based Electrochemosensor for Ultratrace and Precise Detection of 2-Methylisoborneol in Water

Ultratrace 2-methylisoborneol (2-MIB, ∼ng/L) in source water is the main odorant in the algae-derived odor episodes, whose accurate on-site detection will have a promising application potential. Due to the chemical inertness of 2-MIB, sensitive and selective detection of 2-MIB remains much challenging. Herein, molecularly imprinted polymer cavities were polymerized on the heterostructure Ti3C2Tx@CuFc-metal-organic framework to selectively capture 2-MIB, where the heterostructure could catalyze the probe redox reaction of [Fe(CN)63-/4-] and amplify the corresponding current signals. The prepared electrochemical sensor showed higher sensitivity on 2-MIB detection than the reported ones. Excellent stability, reusability, and selectivity for 2-MIB detection were also verified. The linear range and limit of detection of our sensor for 2-MIB were optimized to 0.0001-100 μg/L and 30 pg/L, respectively, performing much better than the reported sensors. Comparable performance to gas chromatography-mass spectrometry was achieved when the sensor was applied to real water samples with or without 2-MIB standards. Overall, our research has made great progress in the application of an on-site sensor in 2-MIB detection and well advances the development of molecularly imprinted polymer-based electrochemical sensors.

4-Methyl-5-vinyl thiazole modified Ni-MOF/g-C3N4/CdS composites for efficient photocatalytic hydrogen evolution without precious metal cocatalysts

The construction of heterojunction systems is an effective way to efficiently generate hydrogen by water photolysis. In this work, Ni-MOF (trimesic acid, (BTC)) and g-C3N4 (denoted as CN) were combined, and then Ni-MOF/CN was modified by 4-Methyl-5-vinyl thiazole (denoted as MVTh). Finally, CdS was loaded on the surface of Ni-MOF/CN/MVTh to prepare the photocatalyst Ni-MOF/g-C3N4/MVTh/CdS (denoted as Ni/CN/M/Cd) with a triangular closed-loop path heterojunction for the first time. As a photocatalyst without precious metal cocatalysts, Ni/CN/M/Cd displayed high H2 evolution (17.844 mmol·g-1·h-1) under an optimum CdS loading of 40 wt%. The H2 evolution rate was approximately 79 times that of Ni-MOF/CN and exceeded those of almost all catalysts based on MOF/CN in the literature. The triangular closed-loop heterojunction formed between Ni-MOF, g-C3N4, and CdS could realize the directional migration of photocarriers and significantly diminished the transfer resistance of carriers. The Ni2+ in Ni-MOF provided many cocatalytic sites for H2 evolution via g-C3N4 and CdS. Furthermore, charge carrier separation in Ni-MOF/CN/CdS improved after the innovative addition of MVTh. This study provides a reference for the construction of a closed-loop heterojunction system without precious metal cocatalysts.

Efficient Removal of Antibiotic Resistance Genes through 4f-2p-3d Gradient Orbital Coupling Mediated Fenton-Like Redox Processes

Peroxymonosulfate (PMS) mediated radical and nonradical active substances can synergistically achieve the efficient elimination of antibiotic resistance genes (ARGs). However, enhancing interface electron cycling and optimizing the coupling of the oxygen-containing intermediates to improve PMS activation kinetics remains a major challenge. Here, Co doped CeVO4 catalyst (Co-CVO) with asymmetric sites was constructed based on Ce 4f-O 2p-Co 3d gradient orbital coupling. The catalyst achieved approximately 2.51×105 copies/mL of extracellular ARGs (eARGs) removal within 15 minutes, exhibited ultrahigh degradation rate (k=1.24 min-1 ). The effective gradient 4f-2p-3d orbital coupling precisely regulates the electron distribution of Ce-O-Co active center microenvironment, while optimizing the electronic structure of Co 3d states (especially the occupancy of eg ), promoting the adsorption of oxygen-containing intermediates. The generated radical and nonradical generated by interfacial electron cycling enhanced by the reduction reaction of PMS at the Ce site and the oxidation reaction at the Co site achieved a significant mineralization rate of ARGs (83.4 %). The efficient removal of ARGs by a continuous flow reactor for 10 hours significantly reduces the ecological risk of ARGs in actual wastewater treatment.

A novel carbonized polymer dots-based molecularly imprinted polymer with superior affinity and selectivity for oxytetracycline removal

Molecularly imprinted polymers (MIPs) synthesized from chain functional monomers are restricted by spatial extension and exhibit relatively poor affinity and selectivity; this results in unsatisfactory applications in complex media. In this study, we prepared unique spherical carbonized polymer dots (CPDs-OH) via the incomplete carbonization of 1-allyl-3-vinylimidazolium bromide and ethylene glycol, and used it as a functional monomer to prepare a newly imprinted polymer (CPDs-OH@MIP) in aqueous media. As a result, the CPDs-OH@MIP exhibited effective recognition of oxytetracycline with an impressive imprinting factor of 6.17, surpassing MIPs prepared with chain functional monomers (1-3). Furthermore, CPDs-OH@MIP exhibited excellent adsorption for oxytetracycline (278.52 mg g-1) and achieved equilibrium in 30 min, with stronger resistance to coexisting cations, anions, and humic acid. Compared to other MIPs and adsorbents, the recognition performance of CPDs-OH@MIP improved 2-4 times; this polymer could remove >92.1% of oxytetracycline in real water samples with at least 10 cycle times. CPDs-OH@MIP prepared using the special spherical monomer forms a denser structure with fewer nonimprinted regions and precisely imprinted sites, remarkably improving the affinity and selectivity of MIPs combined via hydrogen bonds and electrostatic and π-π interactions. Our proposed strategy provides an effective basis for breakthroughs in the practical application of MIPs.

Contribution of wastewater to antimicrobial resistance: A review article

OBJECTIVES

Antimicrobial resistance (AMR) is a global challenge that has raised concern globally, owing to its detrimental effects on the health and economy of countries. The ever-growing threat of AMR and sources of AMR are still being investigated. Wastewater plays an important role as a habitat for bacteria and an environment conducive to gene transfer. The primary aim of this review was to highlight the contribution of wastewater to AMR.

METHODS

Evidence of AMR in wastewater was drawn from literature published in the last 10 years, from 2012 to 2022.

RESULTS

Wastewater from agricultural practices, pharmaceutical manufacturing plants, and hospital effluents was established to promote AMR. Furthermore, stress factors such as the presence of antibiotics, heavy metals, pH, and temperature initiate and propagate AMR in bacteria living in wastewater. AMR in bacteria from wastewater was established to be either natural or acquired. Wastewater treatment techniques such as membrane filtration, coagulation, adsorption, and advanced oxidation processes have been used to remove resistant bacteria with varying success levels.

CONCLUSION

Wastewater is a major contributor to AMR, and an understanding of its role in AMR is necessary to find a lasting solution. In this regard, the spread of AMR in wastewater should be considered a threat that requires a strategy to stop further damage.

Simultaneous removal of antibiotic-resistant Escherichia coli and its resistance genes by dielectric barrier discharge plasma

As emerging contaminants, antibiotic-resistant bacteria (ARB) and antibiotic resistance genes (ARGs) have been widely detected in various aqueous environments. For antibiotic resistance to be inhibited in the environment, it is essential to control ARB and ARGs. In this study, dielectric barrier discharge (DBD) plasma was used to inactivate antibiotic resistant Escherichia coli (AR E. coli) and remove ARGs simultaneously. Within 15 s of plasma treatment, 108 CFU/mL of AR E. coli were inactivated by 97.9%. The rupture of the bacterial cell membrane and the increase of intracellular ROS are the main reasons for the rapid inactivation of bacteria. Intracellular ARGs (i-qnrB, i-blaCTX-M, i-sul2) and integron gene (i-int1) decreased by 2.01, 1.84, 2.40, and 2.73 log after 15 min of plasma treatment, respectively. In the first 5 min of discharge, extracellular ARGs (e-qnrB, e-blaCTX-M, e-sul2) and integron gene (e-int1) decreased by 1.99, 2.22, 2.66, and 2.80 log, respectively. The results of the ESR and quenching experiments demonstrated that ·OH and 1O2 played important roles in the removal of ARGs. This study shows that DBD plasma is an effective technique to control ARB and ARGs in waters.

Dissolved organic matter promotes photocatalytic degradation of refractory organic pollutants in water by forming hydrogen bonding with photocatalyst

Removing refractory organic pollutants in real water using photocatalysis is a great challenge because coexisting dissolved organic matter (DOM) can quench photogenerated holes and thus prevent generation of reactive oxygen species (ROS). Herein, for the first time, we develop a hydrogen bonding strategy to avoid the scavenging of photoexcited holes, by which DOM even promotes photocatalytic degradation of refractory organic pollutants. Theoretical calculations combined with experimental studies reveal the formation of hydrogen bonding between DOM and a hydroxylated S-scheme heterojunction photocatalyst (Mo-Se/OHNT) consisting of hydroxylated nitrogen doped TiO2 (OHNT) and molybdenum doped selenium (Mo-Se). The hydrogen bonding is demonstrated to change the interaction between DOM and Mo-Se/OHNT from DOM-Ti (IV) to a hydrogen bonded complexation through the hydroxyl/amine groups of DOM and the OHNT in Mo-Se/OHNT. The formed hydrogen network can stabilize excited-state of DOM and inject its electron to the conduction band rather than the valence band of the OHNT upon light irradiation, realizing the key to preventing hole quenching. The electron-hole separation in Mo-Se/OHNT is consequently improved for generating more ROS to be involved in removing refractory organic pollutants. Moreover, this hydrogen bonding strategy is generalized to nitrogen doped zinc oxide and graphitic carbon nitride and applies to real water. Our findings provide a new insight into handling the DOM problem for photocatalytic technology towards water and wastewater treatment.

Chlorine oxide radical (ClO) enables the enhanced degradation of antibiotic resistance genes during UV/chlorine treatment by selectively inducing base damage

Compared to individual UV or chlorine disinfection, the combined UV and chlorine (i.e., UV/chlorine) can substantially promote the degradation of antibiotic resistance genes (ARGs) in the effluent by generating radicals. However, the mechanisms of ARG degradation induced by radicals during UV/chlorine treatment remain largely unknown, limiting further enhancement of ARG degradation by process optimization. Herein, we aimed to uncover the role of different radicals in ARG degradation and the molecular mechanisms of ARG degradation by radicals in UV/chlorine process. The ClO was proven to be responsible for the enhanced ARG degradation during UV/chlorine treatment, while the other radicals (OH, Cl, and Cl2-) played a minor role. This is because ClO possessed both high steady-state concentration and high reactivity toward ARGs (rate constant: 4.29 × 1010 M-1 s-1). The ClO might collaborate with free chlorine to degrade ARG. The ClO degraded ARGs by selectively attacking guanine and thymine but failed to induce strand breakage, while chlorine could break the strand of ARGs. Ultimately, ClO cooperated with chlorine to degrade ARGs quickly by hydroxylation and chlorination of bases and produce many chlorine- and nitrogen-containing products as revealed by high-resolution mass spectrometry. The uncovered degradation mechanisms of ARGs by UV/chlorine provide useful guidelines for process optimization to achieve deep removal of effluent ARGs.

Single cobalt atoms anchored on Ti3C2Tx with dual reaction sites for efficient adsorption-degradation of antibiotic resistance genes

The assimilation of antibiotic resistance genes (ARGs) by pathogenic bacteria poses a severe threat to public health. Here, we reported a dual-reaction-site-modified CoSA/Ti3C2Tx (single cobalt atoms immobilized on Ti3C2Tx MXene) for effectively deactivating extracellular ARGs via peroxymonosulfate (PMS) activation. The enhanced removal of ARGs was attributed to the synergistic effect of adsorption (Ti sites) and degradation (Co-O3 sites). The Ti sites on CoSA/Ti3C2Tx nanosheets bound with PO43- on the phosphate skeletons of ARGs via Ti-O-P coordination interactions, achieving excellent adsorption capacity (10.21 × 1010 copies mg-1) for tetA, and the Co-O3 sites activated PMS into surface-bond hydroxyl radicals (•OHsurface), which can quickly attack the backbones and bases of the adsorbed ARGs, resulting in the efficient in situ degradation of ARGs into inactive small molecular organics and NO3. This dual-reaction-site Fenton-like system exhibited ultrahigh extracellular ARG degradation rate (k > 0.9 min-1) and showed the potential for practical wastewater treatment in a membrane filtration process, which provided insights for extracellular ARG removal via catalysts design.

Recent advances in the removal of emerging contaminants from water by novel molecularly imprinted materials in advanced oxidation processes-A review

Recently, there has been a global focus on effectively treating emerging contaminants (ECs) in water bodies. Advanced oxidation processes (AOPs) are the primary technology used for ECs removal. However, the low concentrations of ECs make it difficult to overcome the interference of background substances in complex water quality, which limits the practical application of AOPs. To address this limitation, many researchers are developing new catalysts with preferential adsorption. Molecular imprinting technology (MIT) combined with conventional catalysts has been found to effectively enhance the selectivity of catalysts for the targeted catalytic degradation of pollutants. This review presents a comprehensive summary of the progress made in research on molecularly imprinted polymers (MIPs) in the selective oxidation of ECs in water. The preparation methods, principles, and control points of novel MIP catalysts are discussed. Furthermore, the performance and mechanism of the catalysts in photocatalytic oxidation, electrocatalytic oxidation, and persulfate activation are analyzed with examples. The possible ecotoxicological risks of MIP catalysts are also discussed. Finally, the challenges and prospects of applying MIP catalysts in AOP are presented along with proposed solutions. This review provides a better understanding of using MIP catalysts in AOPs to target the degradation of ECs.

Modulating the electron structure of Co-3d in Co3O4-x/WO2.72 for boosting peroxymonosulfate activation and degradation of sulfamerazine: Roles of high-valence W and rich oxygen vacancies

Sulfate radical (SO₄^•-)-based heterogonous advanced oxidation processes (AOPs) show promising potential to degrade emerging contaminants, however, regulating the electron structure of a catalyst to promote its catalytic activity is challenging. Herein, a hybrid that consists of Co₃O_4-x nanocrystals decorated on urchin-like WO_2.72 (Co₃O_4-x/WO_2.72) with high-valence W and rich oxygen vacancies (OVs) used to modulate the electronic structure of Co-3d was prepared. The Co₃O_4-x/WO_2.72 that developed exhibited high catalytic activity, activating peroxymonosulfate (PMS), and degrading sulfamerazine (SMR). With the use of Co₃O_4-x/WO_2.72, 100 % degradation of SMR was achieved within 2 min, at a pH of 7, with the reaction rate constant k₁ = 3.09 min^-1. Both characterizations and density functional theory (DFT) calculations confirmed the formation of OVs and the promotion of catalytic activity. The introduction of WO_2.72 greatly regulated the electronic structure of Co₃O_4-x. Specifically, the introduction of high-valence W enabled the Co-3d band centre to be closer to the Fermi level and enhanced electrons (e^-) transfer ability, while the introduction of OVs-Co in Co₃O_4-x promoted the activity of electrons in the Co-3d orbital and the subsequent catalytic reaction. The reactive oxygen species (ROS) were identified as •OH, SO₄^•-, and singlet oxygen (¹O₂) by quenching experiments and electron spin resonance (EPR) analysis. The DFT calculation using the Fukui index indicated the reactive sites in SMR were available for an electrophilic attack, and three degradation pathways were proposed.

Mitigating phytotoxicity of tetracycline by metal-free 8-hydroxyquinoline functionalized carbon nitride photocatalyst

Photooxidative removal of pharmaceuticals and organic dyes is an effective way to eliminate growing micropollutants. However, photooxidation often results in byproducts as secondary hazardous substances such as phytotoxins. Herein, we found that photooxidation of common antibiotic tetracycline hydrochloride (TCH) over a metal-free 8-hydroxyquinoline (8-HQ) functionalized carbon nitride (CN) photocatalyst significantly reduces the TCH phytotoxic effect. The phytotoxicity test of photocatalytic treated TCH-solution evaluated towards seed growth of Cicer arietinum plant model endowed natural root and shoot growth. This study highlights the conceptual insights in designing of metal-free photocatalyst for environmental remediation.

Periodate activation by pyrite for the disinfection of antibiotic-resistant bacteria: Performance and mechanisms

The propagation of antibiotic-resistant bacteria (ARB) greatly endangers the ecological safety and human health. This study employed pyrite (FeS₂, naturally abundant mineral) for periodate (PI) activation to disinfect ARB. FeS₂/PI system could disinfect 1 × 10⁷ CFU mL^-1 of kanamycin-resistant E.coli below the limit of detection in 20 min. Efficient ARB inactivation performance was achieved in pH from 3 to 9, ionic strength from 0 to 300 mM, with HA (0.1-10 mg L^-1) in suspension, and in real water samples including tap water, river water and sewage. FeS₂/PI system could also efficiently disinfect gentamycin-resistant E.coli and Gram-positive B. subtilis. The generated reactive species including Fe(IV), ·O₂^- and ·OH would attack cell membrane and overwhelmed intracellular defense system. The intracellular kanamycin resistance genes in cells would be released and then degraded in FeS₂/PI system. PI preferred to be adsorbed on Fe site of FeS₂ (with lower adsorption energy, more occupancy of bonding state and stronger bonding strength). The subsequent transfer of electron cloud from Fe site to PI would cleave IO bond to generate reactive species. Moreover, FeS₂/PI system could also combine with sand filtration system to efficiently capture and disinfect ARB. Therefore, FeS₂/PI system is a promising approach to inactivate ARB in different scenarios.

Adenine imprinted beads as a novel selective extracellular DNA extraction method reveals underestimated prevalence of extracellular antibiotic resistance genes in various environments

Despite severe threats of extracellular antibiotic resistance genes (eARGs) towards public health in various environments, advanced studies have been hindered mainly by ineffective extracellular DNA (exDNA) extraction methods, which is challenged by trace levels of exDNA and inference from abundant coexisting compounds. This study developed a highly selective exDNA extraction method based on molecular imprinting technology (MIT) by using adenine as the template for the first time. Results suggested that adenine imprinted beads were rough spheres at an average size of 0.39 ± 0.07 μm. They effectively adsorbed DNA in the absence of chaotropic agents, with superior capacity (796.2 mg/g), rate (0.0066/s) and regarding DNA of variable lengths, even the ultra-short DNA (<100 bp). They were also highly selective towards DNA, circumventing the interference of competitive compounds' interference. These properties contribute to efficient exDNA extraction (71 %-119 %) from various environmental samples. Specifically, adenine imprinted beads enabled significantly higher extraction rates of eARGs from river, air and vegetable samples (69 %-95 %) compared to that by commercial DNA extraction products (16 %-62 %). The adenine imprinted beads-based method reveals underestimated eARG levels in the environment and the corresponding risks, and thus will thus be a powerful tool for advanced exDNA research.

Chlorination (but Not UV Disinfection) Generates Cell Debris that Increases Extracellular Antibiotic Resistance Gene Transfer via Proximal Adsorption to Recipients and Upregulated Transformation Genes

To advance the understanding of antibiotic resistance propagation from wastewater treatment plants, it is important to elucidate how different effluent disinfection processes affect the dissemination of predominantly extracellular antibiotic resistance genes (eARGs). Here, we show that, by facilitating proximal adsorption to recipient cells, bacterial debris generated by chlorination (but not by UV irradiation) increases the natural transformation frequency of their adsorbed eARG by 2.9 to 7.2-fold relative to free eARGs. This is because chlorination increases the bacterial surface roughness by 1.1 to 6.7-fold and the affinity toward eARGs by 1.6 to 5.8-fold, and 98% of the total eARGs released after chlorination were adsorbed to cell debris. In contrast, UV irradiation released predominantly free eARGs with 18% to 56% lower transformation frequency. The collision theory indicates that the ARG donor-recipient collision frequency increased by 35.1-fold for eARGs adsorbed onto chlorination-generated bacterial debris, and the xDLVO model infers a 29% lower donor-recipient contact energy barrier for these ARGs. Exposure to chlorination-generated bacterial debris also upregulated genes associated with natural transformation in Vibrio vulnificus (e.g., tfoX encoding the major activator of natural transformation) by 2.6 to 5.2-fold, likely due to the generation of chlorinated molecules (5.1-fold higher Cl content after chlorination) and persistent reactive species (e.g., carbon-centered radicals) on bacterial debris. Increased proximal eARG adsorption to bacterial debris was also observed in the secondary effluent after chlorination; this decreased eARG decay by 64% and increased the relative abundance of ARGs by 7.2-fold. Overall, this study highlights that different disinfection approaches can result in different physical states of eARGs that affect their resulting dissemination potential via transformation.

Inactivation of a pathogenic NDM-1-positive Escherichia coli strain and the resistance gene blaNDM-1 by TiO2/UVA photocatalysis

Proliferation of bla_NDM-1 in water and wastewater is particularly concerning because of multidrug-resistance and horizontal transfer of the gene. In the present study, a pathogenic NDM-1-positive Escherichia coli strain (named E. coli NDM-1) and the bla_NDM-1 gene were treated with titanium dioxide (TiO₂)/ultraviolet A (UVA) photocatalysis. Effects of catalyst dose, UVA intensity, and phosphate on bacteria and intracellular and extracellular bla_NDM-1 genes were determined. With increases in TiO₂ dose and UVA intensity, the inactivation rate of E. coli NDM-1 increased greatly in saline solution. However, phosphate in water hindered adsorption of bacteria to TiO₂ and partly changed the TiO₂ photocatalytic pathway, resulting in low degradation efficiency. Although inactivation of E. coli NDM-1 was highly efficient, TiO₂/UVA photocatalysis had little effect on removal of the bla_NDM-1 gene. During the 2-h photocatalytic experiments, E. coli cells decreased by 4.7-log, while the bla_NDM-1 gene decreased by 0.7- ~ 1.5-log. Moreover, the degradation rate of extracellular bla_NDM-1 was ~2.7 times higher than that of intracellular genes. Abundance and transformation frequency of residual bla_NDM-1 genes remained high, even when bacteria were completely inactivated, indicating potential health risks. Increases in treatment time and UVA irradiation intensity are needed to remove the bla_NDM-1 gene to sufficiently low levels.

Multiple Roles of Dissolved Organic Matter in Advanced Oxidation Processes

Advanced oxidation processes (AOPs) can degrade a wide range of trace organic contaminants (TrOCs) to improve the quality of potable water or discharged wastewater effluents. Their effectiveness is impacted, however, by the dissolved organic matter (DOM) that is ubiquitous in all water sources. During the application of an AOP, DOM can scavenge radicals and/or block light penetration, therefore impacting their effectiveness toward contaminant transformation. The multiple ways in which different types or sources of DOM can impact oxidative water purification processes are critically reviewed. DOM can inhibit the degradation of TrOCs, but it can also enhance the formation and reactivity of useful radicals for contaminants elimination and alter the transformation pathways of contaminants. An in-depth analysis highlights the inhibitory effect of DOM on the degradation efficiency of TrOCs based on DOM's structure and optical properties and its reactivity toward oxidants as well as the synergistic contribution of DOM to the transformation of TrOCs from the analysis of DOM's redox properties and DOM's transient intermediates. AOPs can alter DOM structure properties as well as and influence types, mechanisms, and extent of oxidation byproducts formation. Research needs are proposed to advance practical understanding of how DOM can be exploited to improve oxidative water purification.

Development of Adsorptive Membranes for Selective Removal of Contaminants in Water

The presence of arsenic and ammonia in ground and surface waters has resulted in severe adverse effects to human health and the environment. Removal technologies for these contaminants include adsorption and membrane processes. However, materials with high selectivity and pressure stability still need to be developed. In this work, adsorbents and adsorptive membranes were prepared using nanostructured graphitic carbon nitride decorated with molecularly imprinted acrylate polymers templated for arsenate and ammonia. The developed adsorbent removed arsenate at a capacity and selectivity similar to commercial ion-exchange resins. Ammonia was removed at higher capacity than commercial ion exchange resins, but the adsorbent showed lower selectivity. Additionally, the prepared membranes removed more arsenate and ammonia than non-imprinted controls, even in competition with abundant ions in water. Further optimization is required to improve pressure stability and selectivity.

Adsorption-enhanced photocatalytic property of Ag-doped biochar/g-C3N4/TiO2 composite by incorporating cotton-based biochar

In this study, the biochar obtained from waste cotton fibers was introduced into the Ag-doped g-C3N4/TiO2 hybrid composite through a facile one-step hydrothermal process. The morphology, elemental composition, crystal structure, microstructure, specific surface area, chemical bonding state, energy band structure, and separation efficiency of photoinduced charge carriers of the resultant composite were examined using scanning electron microscope, energy dispersive X-ray spectrometer, X-ray diffractometer, transmission electron microscope, surface area analyzer, X-ray photoelectron spectroscope, Ultraviolet-visible spectrophotometer, ultraviolet photoelectron spectroscope, and photoluminescence spectroscope. The adsorption isotherms, kinetics and thermodynamics of the biochar, Ag-doped g-C3N4/TiO2 and Ag-doped biochar/g-C3N4/TiO2 were evaluated using the model methyl orange dye. The photoacatalytic degradation of the model pollutants including methyl orange, methylene blue, congo red, and tetracycline hydrochloride and the photocatalytic reduction of Cr(VI) ions were also assessed under visible light. Experimental results indicated that the photocatalytic property of the Ag-doped biochar/g-C3N4/TiO2 was significantly enhanced through the adsorption enhancement compared with the Ag-doped g-C3N4/TiO2. This was due to the uniform doping of multi-scale porous biochar with g-C3N4 nanosheet, Ag and TiO2 nanoparticles. The adsorptive enhancement induced by the biochar resulted in the narrowed band gap, suitable electronic energy band structure, and fast separation of photoinduced charge carriers of the Ag-doped biochar/g-C3N4/TiO2, which was probably due to the coexistence of multi-valence Ti+4/+3 and Ag0/+1 species and oxygen-containing groups of biochar. The major reactive species of the Ag-doped biochar/g-C3N4/TiO2 were 1O2 and h+. The MO dye adsorption onto the Ag-doped biochar/g-C3N4/TiO2 followed the Langmuir isotherm model, pseudo-first-order and pseudo-second-order kinetic models, and the adsorption process was an endothermic reaction with entropy reduction effects. As such, the Ag-doped biochar/g-C3N4/TiO2 exhibited a promising application for the treatment of wastewater containing multi-pollutants especially organic dyes and heavy metal ions.

Efficient removal of antibiotic-resistant bacteria and intracellular antibiotic resistance genes by heterogeneous activation of peroxymonosulfate on hierarchical macro-mesoporous Co3O4-SiO2 with enhanced photogenerated charges

Antibiotic resistance genes (ARGs) and their host antibiotic-resistant bacteria (ARB) are widely detected in the environment and pose a threat to human health. Traditional disinfection in water treatment plants cannot effectively remove ARGs and ARB. This study explored the potential of a heterogeneous photo-Fenton-like process utilizing a hierarchical macro-mesoporous Co₃O₄-SiO₂ (MM CS) catalyst for activation of peroxymonosulfate (PMS) to inactivate ARB and degrade the intracellular ARGs. A typical gram-negative antibiotic-resistant bacteria called Pseudomonas sp. HLS-6 was used as a model ARB. A completed inactivation of ARB at ∼10⁷ CFU/mL was achieved in 30 s, and an efficient removal rate of more than 4.0 log for specific ARGs (sul1 and intI1) was achieved within 60 min by the MM CS-based heterogeneous photo-Fenton-like process under visible light and neutral pH conditions. Mechanism investigation revealed that •O₂^- and ¹O₂ were the vital reactive species for ARB inactivation and ARG degradation. The formation and transformation of the active species were proposed. Furthermore, the hierarchical macro-mesoporous structure of MM CS provided excellent optical and photoelectrochemical properties that promoted the cycle of Co³⁺/Co²⁺ and the effective utilization of PMS. This process was validated to be effective in various water matrices, including deionized water, underground water, source water, and secondary effluent wastewater. Collectively, this work demonstrated that the MM CS-based heterogeneous photo-Fenton-like process is a promising technology for controlling the spread of antibiotic resistance in aquatic environments.

UV-aging of microplastics increases proximal ARG donor-recipient adsorption and leaching of chemicals that synergistically enhance antibiotic resistance propagation

Despite growing attention to environmental pollution by microplastics (MP), the effects of MP aging on bacterial horizontal gene transfer (HGT) have not been systematically investigated. Here, we used UV-aged polystyrene microplastics (PS-MPs) to investigate how aging affects antibiotic resistance genes (ARGs) transfer efficiency from various ARG vectors to recipient bacteria. The adsorption capacity of MP₂₀ (20-day UV-aged PS-MPs) towards E. coli (harboring plasmid-borne bla_TEM-1), plasmid pET29 (harboring bla_NDM-1) and phage lambda (carrying the aphA1 ARG) increased by 6.6-, 5.2- and 8.3-fold, respectively, relative to pristine PS-MPs (MP₀), due to increased specific surface area and affinity for these ARG vectors. Moreover, MP₂₀ released more organic compounds (TOC 1.6 mg/g-MP₂₀, versus 0.2 mg/g-MP₀ in 4 h) -possibly depolymerization byproducts (verified by GC-MS), which induced intracellular ROS generation, increased cell permeability and upregulated HGT associated genes. Accordingly, MP₂₀ enhanced ARG transfer frequency from E. coli, plasmid pET29 and phage lambda (relative to MP₀) by 1.3-, 4.7- and 3.5-fold, respectively. The Bliss independence model infers that higher bacterial adsorption and exposure to chemicals released during MP aging synergistically enhanced ARG transfer. This underscores the need to assess the significance of this overlooked phenomenon to the environmental dissemination of antibiotic resistance and other HGT processes.

Solar light-driven photocatalysis using BaFe2O4/rGO for chlorhexidine digluconate-contaminated water: comparison with artificial UV and visible light-mediated photocatalysis

Synthesis and characterization of dual functioning material is an effective approach for the promotion of organic pollutant degradation through adsorption as well as photocatalysis. Herein, graphene oxide was modified by the addition of barium nitrate and iron to construct a smooth sheet-like structure (BaFe₂O₄/rGO) for the removal of chlorhexidine digluconate (CHD). Compared with GO (75.69%-UV light; 88.17%-visible light), BaFe₂O₄/rGO showed significant adsorption-photocatalysis effect under visible light (93.95%) than that under UV light (78.17%). The introduction of barium nitrate and iron into graphene oxide leads to a smooth porous structure with increased surface area (93.66 m² g^-1), which resulted in a large number of adsorption active sites and great photocatalytic activity with efficient charge separation. Although catalysts did not mineralize CHD completely, but the parent compound mineralized to some extent, which was confirmed by the TOC measurement and UV₂₅₄ absorbance variation. In addition, toxicity of degraded products was analysed by bacterial susceptibility test on Bacillus cereus DPAML065, suggesting that nontoxic by-products of CHD were formed, which leads to their safe disposal. Based on the identified transformed products, the possible degradation pathway was proposed. Batch studies demonstrated that BaFe₂O₄/rGO is highly photoactive based on reaction rate constant (R² = 0.984), where the kinetics data were well-fitted using the pseudo-first order. Moreover, efficiency of catalysts was examined under solar light to achieve the sustainability.

Enhanced propagation of intracellular and extracellular antibiotic resistance genes in municipal wastewater by microplastics

Microplastics (MPs) are an emerging global concern as they are abundant in the environment and can act as vectors of various contaminants. However, whether and how MPs can be vectors of antibiotic resistance genes (ARGs), especially extracellular ARGs (eARGs), remains far from explicit. This study addresses the adsorption of both intracellular ARGs (iARGs) and eARGs by four types of MPs in municipal wastewater, and then explores the potential horizontal gene transfer of iARGs and eARGs exposed to MPs. Results indicate that though MPs significantly adsorbed both iARGs and eARGs, eARGs were adsorbed with a significantly higher fold enrichment (2.0-5.0 log versus 2.0-3.3 log) and rate (0.0056 min^-1 versus 0.0037 min^-1) than iARGs. While all four types of MPs adsorbed ARGs, polypropylene MPs showed the highest adsorption capacity for ARGs. Background constituents such as humic acid and antibiotics significantly inhibited adsorption of iARGs, but not eARGs on MPs. The presence of sodium chloride didn't significantly affect adsorption of iARGs or eARGs. The adsorption of ARGs was well explained by the extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) interaction energy profile. Higher eARG adsorption was attributed to a lower energy barrier between MPs and eARGs than that between MPs and iARGs. Exposure to MPs enhanced horizontal gene transfer of both iARGs and eARGs by 1.5 and 2.0 times, respectively. The improved contact potential between donors and recipients, as well as the increased cell permeability of recipients induced the improved horizontal gene transfer by MPs. This study underscores the need to address ARG propagation through adsorption to MPs.

Visible Light Response Photocatalytic Performance of Z-Scheme Ag3PO4/GO/UiO-66-NH2 Photocatalysts for the Levofloxacin Hydrochloride

A Ag₃PO₄/GO/UiO-66-NH₂(AGU) composite photocatalyst was prepared by an ultrasonic-assisted in situ precipitation method. The optical property, structure, composition, and morphology of photocatalysts were investigated using UV-vis diffuse reflectance spectroscopy, photoluminescence spectroscopy, electrochemical impedance spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy, energy-dispersive spectrometry, transmission electron microscopy, Fourier transform infrared spectroscopy, and charge flow tracking by photodeposition of Pt and PbO₂ nanoparticles. In comparison with Ag₃PO₄ and Ag₃PO₄/UiO-66-NH₂(AU), the AGU composite photocatalyst showed heightened photocatalytic performance for the degradation of levofloxacin hydrochloride (LVF). The AGU photocatalyst (dosage: 0.8 g/L) with 1% mass content of graphene oxide (GO), the mass ratio of Ag₃PO₄ and UiO-66-NH₂(U66N) reached 2:1, showed the highest photodegradation rate of 94.97% for 25 mg/L LVF after 60 min of visible light irradiation at pH = 6. The formation of a heterojunction and the addition of GO synergistically promote faster separation of electron-hole pairs, retain more active substances, and enhance the performance of the photocatalyst. Furthermore, the mechanism of the Z-scheme of the AGU composite photocatalytic is proposed.

Toward Selective Oxidation of Contaminants in Aqueous Systems

The presence of diverse pollutants in water has been threating human health and aquatic ecosystems on a global scale. For more than a century, chemical oxidation using strongly oxidizing species was one of the most effective technologies to destruct pollutants and to ensure a safe and clean water supply. However, the removal of increasing amount of pollutants with higher structural complexity, especially the emerging micropollutants with trace concentrations in the complicated water matrix, requires excessive dosage of oxidant and/or energy input, resulting in a low cost-effectiveness and possible secondary pollution. Consequently, it is of practical significance but scientifically challenging to achieve selective oxidation of pollutants of interest for water decontamination. Currently, there are a variety of examples concerning selective oxidation of pollutants in aqueous systems. However, a systematic understanding of the relationship between the origin of selectivity and its applicable water treatment scenarios, as well as the rational design of catalyst for selective catalytic oxidation, is still lacking. In this critical review, we summarize the state-of-the-art selective oxidation strategies in water decontamination and probe the origins of selectivity, that is, the selectivity resulting from the reactivity of either oxidants or target pollutants, the selectivity arising from the accessibility of pollutants to oxidants via adsorption and size exclusion, as well as the selectivity due to the interfacial electron transfer process and enzymatic oxidation. Finally, the challenges and perspectives are briefly outlined to stimulate future discussion and interest on selective oxidation for water decontamination, particularly toward application in real scenarios.

Targeted degradation of refractory organic compounds in wastewaters based on molecular imprinting catalysts

Efficient removal of low-concentration refractory pollutants is a crucial problem to ensuring water safety. The use of heterogeneous catalysis of molecular imprinting technology combined with traditional catalysts is a promising method to improve removal efficiency. Presently, the research into molecular imprinting targeting catalysts focuses mainly on material preparation and performance optimization. However, more researchers are investigating other applications of imprinting materials. This review provides recent progress in photocatalyst preparation, electrocatalyst, and Fenton-like catalysts synthesized by molecular imprinting. The principle and control points of target catalysts prepared by precipitation polymerization (PP) and surface molecular imprinting (S-MIP) are introduced. Also, the application of imprinted catalysts in targeted degradation of drugs, pesticides, environmental hormones, and other refractory pollutants is summarized. In addition, the reusability and stability of imprinted catalyst in water treatment are discussed, and the possible ecotoxicity risk is analyzed. Finally, we appraised the prospects, challenges, and opportunities of imprinted catalysts in the advanced oxidation process. This paper provides a reference for the targeted degradation of refractory pollutants and the preparation of targeted catalysts.

Salt-resistant nanosensor for fast sulfadimethoxine tracing based on oxygen-doped g-C3N4 nanoplates

A novel oxygen-doped g-C₃N₄ nanoplate (OCNP) structure that can serve as an efficient sulfadimethoxine (SDM) sensing platform has been developed. Taking advantage of its inherent oxygen-containing functional groups and 2D layered structure with π-conjugated system, OCNP exhibits effective radiative recombination of surface-confined electron-hole pairs and efficient π-π interaction with SDM. This causes rapid fluorescence response and thus ensures the fast and continuous monitoring of SDM. Based on the fluorescence experiments and band structure calculation, the mechanism of the SDM-induced quenching phenomenon was mainly elucidated as the photoinduced electron transfer process under a dynamic quenching mode. Under optimized conditions, the as-proposed nanosensor, which emitted strong fluorescence at 375 nm with an excitation wavelength at 255 nm, presents an excellent analytical performance toward SDM with a wide linear range from 3 to 60 μmol L^-1 and a detection limit of 0.85 μmol L^-1 (S/N = 3). In addition, this strategy exhibits satisfactory recovery varied from 94 to 103% with relative standard derivations (RSD) in the range 0.9 to 6.8% in real water samples. It also shows marked tolerability to a series of high concentrations of metals and inorganic salts. This strategy not only broadens the application of oxygen-doped g-C₃N₄ nanomaterial in antibiotic sensing field but also presents a promising potential for on-line contaminant tracing in complex environments.

Innovative utilization of molecular imprinting technology for selective adsorption and (photo)catalytic eradication of organic pollutants

The rapid development of industrialization and urbanization results in a numerous production of various organic chemicals to meet the increasing demand in high-quality life. During the synthesis and utilization of these chemical products, their residues unavoidably emerged in environments to severely threaten human's health. It is thus urgent to exploit effective technology for readily removing the organic pollutants with high selectivity and good reusability. As one of the most promising approaches, molecular imprinting technology (MIT) employs a chemically synthetic route to construct artificial recognition sites in highly-crosslinked matrix with complementary cavity and functional groups to target species, which have been attracting more and more interest for environmental remediation, such as the selective adsorption/separation and improved catalytic degradation of pollutants. In this review, MIT is first introduced briefly to understand their preparing process, recognition mechanism and common imprinted systems. Then, their specific binding affinities are demonstrated for selectively adsorbing and removing target molecules with a large capacity. Furthermore, the innovative utilization of MIT in catalytic eradication of pollutants is comprehensively overviewed to emphasize their enhanced efficiency and improved performances, which are classified by the used catalytically-active nanocrystals and imprinted systems. After summarizing recent advances in these fields, some limitations are discussed and possible suggestions are given to guide the future exploitation on MIT for environmental protection.

S. SK. Nanotechnology: an emerging approach to combat COVID-19

The recent outbreak of coronavirus disease (COVID-19) has challenged the survival of human existence in the last 1 year. Frontline healthcare professionals were struggling in combating the pandemic situation and were continuously supported with literature, skill set, research activities, and technologies developed by various scientists/researchers all over the world. To handle the continuously mutating severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) requires amalgamation of conventional technology with emerging approaches. Nanotechnology is science, engineering, and technology dealing at the nanoscale level. It has made possible the development of nanomaterials, nano-biosensors, nanodrugs, and vaccines for diagnosis, therapy, and prevention of COVID-19. This review has elaborately highlighted the role of nanotechnology in developing various detection kits such as nanoparticle-assisted diagnostics, antibody assay, lateral flow immunoassay, nanomaterial biosensors, etc., in detection of SARS-CoV-2. Similarly, various advancements supervene through nanoparticle-based therapeutic drugs for inhibiting viral infection by blocking virus attachment/cell entry, multiplication/replication, and direct inactivation of the virus. Furthermore, information on vaccine development and the role of nanocarriers/nanoparticles were highlighted with a brief outlining of nanomaterial usage in sterilization and preventive mechanisms engineered to combat COVID-19 pandemic.

Intracellular versus extracellular antibiotic resistance genes in the environment: Prevalence, horizontal transfer, and mitigation strategies

Antibiotic resistance genes (ARGs) are present as both intracellular and extracellular fractions of DNA in the environment. Due to the poor yield of extracellular DNA in conventional extraction methods, previous studies have mainly focused on intracellular ARGs (iARGs). In this review, we evaluate the prevalence/persistence and horizontal transfer of iARGs and extracellular ARGs (eARGs) in different environments, and then explore advanced mitigation strategies in wastewater treatment plants (WWTPs) for preventing the spread of antibiotic resistance in the environment. Although iARGs are the main fraction of ARGs in nutrient-rich environments, eARGs are predominant in receiving aquatic environments. In such environments, natural transformation of eARGs occurs with a comparable frequency to conjugation of iARGs. Further, eARGs can be adsorbed by soil and sediments particles, protected from DNase degradation, and consequently persist longer than iARGs. Collectively, these characteristics emphasize the crucial role of eARGs in the spread of antibiotic resistance in the environment. Fate of iARGs and eARGs through advanced treatment technologies (disinfection and membrane filtration) indicates that different mitigation strategies may be required for each ARG fraction to be significantly removed. Finally, comprehensive risk assessment is needed to evaluate/compare the effect of iARGs versus eARGs in the environment.

TiO2 microspheres with cross-linked cyclodextrin coating exhibit improved stability and sustained photocatalytic degradation of bisphenol A in secondary effluent

Photocatalytic water treatment has significant potential to disinfect and degrade recalcitrant organic pollutants while minimizing the need to add chemicals, but current approaches have poor energy efficiency due, in part, to inefficient utilization of photo-generated reactive oxygen species (ROS). Organic coatings such as cyclodextrin (CD) can adsorb target contaminants and bring them close to the photocatalyst surface to enhance ROS utilization efficiency, but the coatings themselves are susceptible to ROS attack. Here, we report an ROS-resistant fluorinated CD polymer (CDP) that can both adsorb contaminants and resist degradation by ROS, yielding a more efficient material for "trap and zap" water treatment. We produced the CDP through condensation polymerization of β-cyclodextrin and tetrafluoroterephthalonitrile, resulting in a cross-linked, covalently bound CD film that is much more stable than prior approaches involving physi-sorption. We optimized the coating thickness on TiO₂ microspheres to improve the efficiency of contaminant degradation, and found that increasing the CDP content enhanced BPA adsorption but also occluded photocatalytic sites and hindered photocatalytic degradation. The optimum content of CDP was 5% by weight, and this optimal CDP-TiO₂ composition had a BPA adsorption capacity of 36.9 ± 1.0 mg g^-1 compared with 24.1 ± 1.1 mg g^-1 for CD-coated TiO₂ (CD-TiO₂) and 21.9 ± 1.5 mg g^-1 for bare TiO₂. CDP-TiO₂ exhibited minimal photoactivity loss after 1000 h of repeated use in DI water under UVA irradiation (365 nm, 3.83 × 10^-6 E L^-1s^-1), and no release of organic carbon from the coating was detected. Photocatalytic treatment using CDP-TiO₂ only showed a small decrease in BPA removal efficiency in secondary effluent after four 3-h cycles, from 80.2% to 71.7%. In contrast, CD-TiO₂ and P25 removed only 29.8% and 6.2% of BPA after 4 cycles, respectively. Altogether, the CDP-TiO₂ microspheres represent promising materials for potential use in photocatalytic water treatment.

Dielectric barrier discharge plasma with photocatalysts as a hybrid emerging technology for degradation of synthetic organic compounds in aqueous environments: A critical review

Dielectric barrier discharge (DBD) plasma has been recently used for removal of synthetic organic compounds (SOCs) from aqueous environments. The removal of SOCs by alone DBD is significantly limited by its high electricity needs and inefficient mineralization, which affects the further application of DBD for SOCs. The combined application of DBD with other technologies and the addition of a supplementary substance for energy-saving were proposed to resolve these problems. The addition of catalysts is considered to be a promising and innovative approach to increase the energy yield of DBD, improve the environment friendly of DBD, develop the variety of goal SOCs, and improve the removal efficiency of DBD system. Despite the increasing use of the coupling form of DBD and catalysts, as catalytic dielectric barrier discharge (CDBD), but it still requires a comprehensive review to summarize the last studies and highlight the future perspectives in this area. Therefore, this work is the first literature review aimed to critically assess the latest developments of catalysts coupling with DBD employed in aqueous environments. Moreover, performance evaluation, energy yield, toxicity, eco-friendly, and future perspectives of the CDBD systems for SOCs removal were discussed and overviewed. The results showed that the coupling of catalysts with DBD presents synergistic effects and had excellent removal performance for aqueous SOCs. Overall, it can be concluded that the essential principles of environmental and economic sustainability have been addressed for the removal of persistent pollutants from aqueous environments in the CDBD systems.