Covalent Immobilization of Cellulase Using Magnetic Poly(ionic liquid) Support: Improvement of the Enzyme Activity and Stability

A pushed biosynthesis of 2,6-dihydroxybenzoic acid by the recombinant 2,3-dihydroxybenzoic acid decarboxylase immobilized on novel amino-modified lignin-containing cellulose nanocrystal aerogel

Production of 2,6-dihydroxybenzoic acid (2,6-DHBA) via enzymatic carboxylation of resorcinol by decarboxylases is of great promising but shows depressed equilibrium conversion. In this study, 2,3-dihydroxybenzoic acid decarboxylase from Aspergillus oryzae (2,3-DHBD_Ao) pushing the conversion towards carboxylation for efficient 2,6-DHBA biosynthesis was achieved. Meanwhile, a novel amino-modified and lignin-doped cellulose nanocrystal aerogel (A-LCNCA) with high specific surface area and prominent CO2 capture was prepared for 2,3-DHBD_Ao immobilization. 2,3-DHBD_Ao@A-LCNC contributed a further enhanced conversion of carboxylation with the maximal conversion of 76.2 %, which was correlated to both the activity of 2,3-DHBD_Ao and the high CO2 loading capacity of A-LCNCA. Moreover, 2,3-DHBD_Ao@A-LCNC exhibited superior performances in a wider range of temperature and higher concentrations of substrate, with a prolonged storage period longer than 30 days. After seven cycles reuse, 2,3-DHBD_Ao@A-LCNCA could retain 85.3 % of its original activity. These results suggest a considerable potential of 2,3-DHBD_Ao@A-LCNCA in the selective biosynthesis of 2,6-DHBA.

Cellulase immobilization to enhance enzymatic hydrolysis of lignocellulosic biomass: An all-inclusive review

Cellulase-mediated lignocellulosic biorefinery plays a crucial role in the production of high-value biofuels and chemicals, with enzymatic hydrolysis being an essential component. The advent of cellulase immobilization has revolutionized this process, significantly enhancing the efficiency, stability, and reusability of cellulase enzymes. This review offers a thorough analysis of the fundamental principles underlying immobilization, encompassing various immobilization approaches such as physical adsorption, covalent binding, entrapment, and cross-linking. Furthermore, it explores a diverse range of carrier materials, including inorganic, organic, and hybrid/composite materials. The review also focuses on emerging approaches like multi-enzyme co-immobilization, oriented immobilization, immobilized enzyme microreactors, and enzyme engineering for immobilization. Additionally, it delves into novel carrier technologies like 3D printing carriers, stimuli-responsive carriers, artificial cellulosomes, and biomimetic carriers. Moreover, the review addresses recent obstacles in cellulase immobilization, including molecular-level immobilization mechanism, diffusion limitations, loss of cellulase activity, cellulase leaching, and considerations of cost-effectiveness and scalability. The knowledge derived from this review is anticipated to catalyze the evolution of more efficient and sustainable biocatalytic systems for lignocellulosic biomass conversion, representing the current state-of-the-art in cellulase immobilization techniques.

Immobilization of Candida antarctica lipase B on ILs modified CNTs with different chain lengths: Regulation of substrate tunnel "Leucine gating"

Ionic liquids (ILs) have been widely used as chemical modifiers to modify the carriers and thus improve the efficiency, activity and stability of the enzymes. However, as thousands of ILs have been found up to date, it's a huge work for screening and designing suitable ILs for immobilization of enzymes. Moreover, the mechanism of improving enzymes catalytic performance is still remain ambiguous. Thus, this study investigated the impact of ILs with different chain lengths on the enzymatic properties of Candida antarctica lipase B (CALB). Molecular dynamics simulations were employed to examine the interaction between ILs modified CNTs and CALB, as well as their effects on CALB's structure. The results revealed that ILs with different chain lengths significantly influenced the absorption orientation of CALB. Tunnel analysis identified a key role for Leu278 in regulating the open or closed state of Tunnel 2 during CALB's catalytic cycle. The weak interaction analysis demonstrated that ILs with suitable chain lengths provided spatial freedom and formed strong interactions with CNTs and ILs (vdW and hbond). This led to a conformational flip of Leu278, stabilizing the open state of Tunnel 2 and improving the activity and stability of immobilized CALB. This study provides novel insights into the design of new green modifiers to modulate carrier performance and obtain immobilized enzymes with better performance, and establishes a theoretical basis for the design and selection of modifiers for ILs in future work.

Immobilization of Cellulase Enzymes on Single-Walled Carbon Nanotubes for Recycling of Enzymes and Better Yield of Bioethanol Using Computer Simulations

The utilization of microbial cellulase enzymes for transforming plant biomass into biofuel or bioethanol, which can serve as a substitute for fossil fuel, is a subject of growing interest. Nonetheless, large-scale production of biofuel using cellulases is not economically feasible as the extraction of these enzymes from diverse microorganisms is an expensive process. To address this issue, immobilizing the enzyme to a substrate material, e.g., carbon nanotubes (CNTs), to recycle without a significant decline in its catalytic activity is a promising solution. Due to the hydrophobic nature of CNTs, we employed molecular docking and network analysis methodologies to identify potential CNT-binding sites on the outer surface of a wild-type cellulase enzyme, CelS. Classical molecular dynamics simulations of CNT-bound CelS through one of the selected binding sites resulted in negligible changes in the secondary structure of the enzyme and its catalytic domain, implying the least possible effect on the catalytic activity post-immobilization. Furthermore, our study reveals that while the unfolding near the CNT-binding region in CelS is more pronounced when the enzyme is interacting with a wider CNT, resulting in enhanced contact area and improved binding affinity, its impact on the overall CelS structure is relatively less significant when compared to thinner CNTs. Particularly, CNTs of diameter ∼12 Å can serve as a favorable option for substrate materials in cellulase immobilization. Our study also provides critical insights into the binding mechanisms between cellulase and CNTs, which could lead to the development of more efficient biocatalysts for biofuel production.

Rice straw derived graphene-silica based nanocomposite and its application in improved co-fermentative microbial enzyme production and functional stability

Cellulases are the one of the most highly demanded industrial biocatalysts due to their versatile applications, such as in the biorefinery industry. However, relatively poor efficiency and high production costs are included as the key industrial constraints that hinder enzyme production and utilization at economic scale. Furthermore, the production and functional efficiency of the β-glucosidase (BGL) enzyme is usually found to be relatively low among the cellulase cocktail produced. Thus, the current study focuses on fungi-mediated improvement of BGL enzyme in the presence of a rice straw-derived graphene-silica-based nanocomposite (GSNCs), which has been characterized using various techniques to analyze its physicochemical properties. Under optimized conditions of solid-state fermentation (SSF), co-fermentation using co-cultured cellulolytic enzyme has been done, and maximum enzyme production of 42 IU/gds FP, 142 IU/gds BGL, and 103 IU/gds EG have been achieved at a 5 mg concentration of GSNCs. Moreover, at a 2.5 mg concentration of nanocatalyst, the BGL enzyme showed its thermal stability at 60°C and 70 °C by holding its half-life relative activity for 7 h, while the same enzyme demonstrated pH stability at pH 8.0 and 9.0 for the 10 h. This thermoalkali BGL enzyme might be useful for the long-term bioconversion of cellulosic biomass into sugar.

A novel microbial-derived family 19 endochitinase with exochitinase activity and its immobilization

A novel chitinase gene of 888 bp from Streptomyces bacillaris was cloned and expressed in Escherichia coli BL21. The purified recombinant enzyme (SbChiAJ103) was identified as the first microbial-derived family 19 endochitinase that showed exochitinase activity. SbChiAJ103 exhibited the substrate preference for N-acetylchitooligosaccharides with even degrees of polymerization and the capability to specifically hydrolyze colloidal chitin into (GlcNAc)₂. Mono-methyl adipate was employed as a novel linker for the efficient covalent immobilization of chitinase on magnetic nanoparticles (MNPs). The immobilized SbChiAJ103, SbChiAJ103@MNPs, exhibited superior pH tolerance, temperature stability, and storage stability than free SbChiAJ103. Even after incubation at 45 °C for 24 h, SbChiAJ103@MNPs could retain more than 60.0% initial activity. As a result, the enzymatic hydrolysis yield of SbChiAJ103@MNPs increased to 1.58 times that of free SbChiAJ103. Moreover, SbChiAJ103@MNPs could be reused by convenient magnetic separation. After 10 recycles, SbChiAJ103@MNPs could retain almost 80.0% of its initial activity. The immobilization of the novel chitinase SbChiAJ103 paves the way to the efficient and eco-friendly commercial production of (GlcNAc)₂. KEY POINTS: • The first microbial GH19 endochitinase with exochitinase activity was reported. • Mono-methyl adipate was first employed to immobilize chitinase. • SbChiAJ103@MNPs showed excellent pH stability, thermal stability, and reusability.

Fabrication of a Magnetic Porous Organic Polymer for α-Glucosidase Immobilization and Its Application in Inhibitor Screening

The technology based on immobilized enzymes was employed to screen the constituents inhibiting disease-related enzyme activity from traditional Chinese medicine, which is expected to become an important approach of innovative drug development. Herein, the Fe₃O₄@POP composite with a core-shell structure was constructed for the first time with Fe₃O₄ magnetic nanoparticles as the core, 1,3,5-tris (4-aminophenyl) benzene (TAPB) and 2,5-divinylterephthalaldehyde (DVA) as organic monomers, and used as the support for immobilizing α-glucosidase. Fe₃O₄@POP was characterized by transmission electron microscopy, energy-dispersive spectrometry, Fourier transform infrared, powder X-ray diffraction, X-ray photoelectron spectroscopy, and vibrating sample magnetometry. Fe₃O₄@POP exhibited a distinct core-shell structure and excellent magnetic response (45.2 emu g^-1). α-Glucosidase was covalently immobilized on core-shell Fe₃O₄@POP magnetic nanoparticles using glutaraldehyde as the cross-linking agent. The immobilized α-glucosidase possessed improved pH stability and thermal stability as well as good storage stability and reusability. More importantly, the immobilized enzyme exhibited a lower K_m value and enhanced affinity for the substrate than the free one. The immobilized α-glucosidase was subsequently used for inhibitor screening from 18 traditional Chinese medicines in combination with capillary electrophoresis analysis among which Rhodiola rosea exhibited the highest enzyme inhibitory activity. These positive results demonstrated that such magnetic POP-based core-shell nanoparticles were a promising carrier for enzyme immobilization and the screening strategy based on immobilized enzyme provided an effective way to rapidly explore the targeted active compounds from medicinal plants.

Biomimetic one-pot preparation of surface biofunctionalized silica-coated magnetic composites for dual enzyme oriented immobilization without pre-purification

Surface functioned magnetic silica particles are efficient carriers to achieve facilitated separation and recycling of biocatalysts. However, traditional methods of modifying magnetic silica particles required time-costly sequential coating and surface modification steps and toxic solvents. Herein, a green and efficient routine was proposed to prepare the surface modified silica-coated magnetic microspheres (SCEs@SiO₂ @Fe₃O₄) in one-pot. The elastin-like polypeptides (ELPs)-SpyCatcher chimera (SCEs) were purified by inverse transition cycling with high yield (275 mg/L) and incorporated into the magnetic silica spheres based on the biomimetic silicification capability of ELPs as proved by the EDS and SEM mapping. No SCEs leaked was observed within 48 h, indicating excellent stability in buffer. Then, the biofunctionalized carriers were used to purify and immobilize the target dual enzymes (xylanase-linker-SpyTag-linker-lichenase, bienzymes) directly from the crude cell lysis solution by the spontaneous isopeptide bond reaction between SpyCatcher and SpyTag. The immobilized bienzymes were sphere-like magnetic silica particles with uniform size, which had good magnetic responsiveness. The immobilization yield, immobilization efficiency and activity recovery for xylanase were 86%, 84 % and 72 %, while for lichenase was 92 %, 86 % and 79 %, respectively. Besides, the immobilized bienzymes showed good reusability (>60 %, 10 times for xylanase, >95 %, 8 times for lichenase). The SCEs modified silica-coated magnetic microspheres are expected to provide versatile platforms for single-step of purification and immobilization of multienzymes, offering great potentials in the field of biocatalysis.

Advanced Formulations Based on Poly(ionic liquid) Materials for Additive Manufacturing

Innovation in materials specially formulated for additive manufacturing is of great interest and can generate new opportunities for designing cost-effective smart materials for next-generation devices and engineering applications. Nevertheless, advanced molecular and nanostructured systems are frequently not possible to integrate into 3D printable materials, thus limiting their technological transferability. In some cases, this challenge can be overcome using polymeric macromolecules of ionic nature, such as polymeric ionic liquids (PILs). Due to their tuneability, wide variety in molecular composition, and macromolecular architecture, they show a remarkable ability to stabilize molecular and nanostructured materials. The technology resulting from 3D-printable PIL-based formulations represents an untapped array of potential applications, including optoelectronic, antimicrobial, catalysis, photoactive, conductive, and redox applications.

Immobilization of Recombinant Endoglucanase (CelA) from Clostridium thermocellum on Modified Regenerated Cellulose Membrane

Cellulases are being widely employed in lignocellulosic biorefineries for the sustainable production of value-added bioproducts. However, the high production cost, sensitivity, and non-reusability of free cellulase enzymes impede their commercial applications. Enzyme immobilization seems to be a potential approach to address the aforesaid complications. The current study aims at the production of recombinant endoglucanase (CelA) originated from the cellulosome of Clostridium thermocellum in Escherichia coli (E. coli), followed by immobilization using modified regenerated cellulose (RC) membranes. The surface modification of RC membranes was performed in two different ways: one to generate the immobilized metal ion affinity membranes RC-EPI-IDA-Co2+ (IMAMs) for coordination coupling and another to develop aldehyde functional group membranes RC-EPI-DA-GA (AMs) for covalent bonding. For the preparation of IMAMs, cobalt ions expressed the highest affinity effect compared to other metal ions. Both enzyme-immobilized membranes exhibited better thermal stability and maintained an improved relative activity at higher temperatures (50–90 °C). In the storage analysis, 80% relative activity was retained after 15 days at 4 °C. Furthermore, the IMAM- and AM-immobilized CelA retained 63% and 53% relative activity, respectively, after being reused five times. As to the purification effect during immobilization, IMAMs showed a better purification fold of 3.19 than AMs. The IMAMs also displayed better kinetic parameters, with a higher Vmax of 15.57 U mg−1 and a lower Km of 36.14 mg mL−1, than those of AMs. The IMAMs were regenerated via treatment with stripping buffer and reloaded with enzymes and displayed almost 100% activity, the same as free enzymes, up to 5 cycles of regeneration.

Cellulase Immobilization on Nanostructured Supports for Biomass Waste Processing

Nanobiocatalysts, i.e., enzymes immobilized on nanostructured supports, received considerable attention because they are potential remedies to overcome shortcomings of traditional biocatalysts, such as low efficiency of mass transfer, instability during catalytic reactions, and possible deactivation. In this short review, we will analyze major aspects of immobilization of cellulase-an enzyme for cellulosic biomass waste processing-on nanostructured supports. Such supports provide high surface areas, increased enzyme loading, and a beneficial environment to enhance cellulase performance and its stability, leading to nanobiocatalysts for obtaining biofuels and value-added chemicals. Here, we will discuss such nanostructured supports as carbon nanotubes, polymer nanoparticles (NPs), nanohydrogels, nanofibers, silica NPs, hierarchical porous materials, magnetic NPs and their nanohybrids, based on publications of the last five years. The use of magnetic NPs is especially favorable due to easy separation and the nanobiocatalyst recovery for a repeated use. This review will discuss methods for cellulase immobilization, morphology of nanostructured supports, multienzyme systems as well as factors influencing the enzyme activity to achieve the highest conversion of cellulosic biowaste into fermentable sugars. We believe this review will allow for an enhanced understanding of such nanobiocatalysts and processes, allowing for the best solutions to major problems of sustainable biorefinery.

Investigating the Impact of Polymer Length, Attachment Site, and Charge on Enzymatic Activity and Stability of Cellulase

The thermophilic cellulase Cel5a from Fervidobacterium nodosum (FnCel5a) was conjugated with neutral, cationic, and anionic polymers of increasing molecular weights. The enzymatic activity toward an anionic soluble cellulose derivative, thermal stability, and functional chemical stability of these bioconjugates were investigated. The results suggest that increasing polymer chain length for polymers compatible with the substrate enhances the positive impact of polymer conjugation on enzymatic activity. Activity enhancements of nearly 100% were observed for bioconjugates with N,N-dimethyl acrylamide (DMAm) and N,N-dimethyl acrylamide-2-(N,N-dimethylamino)ethyl methacrylate (DMAm/DMAEMA) due to proposed polymer-substrate compatibility enabled by potential noncovalent interactions. Double conjugation of two functionally distinct polymers to wild-type and mutated FnCel5a using two conjugation methods was achieved. These doubly conjugated bioconjugates exhibited similar thermal stability to the unmodified wild-type enzyme, although enzymatic activity initially gained from conjugation was lost, suggesting that chain length may be a better tool for bioconjugate activity modulation than double conjugation.

Enhancing Enzyme Activity by the Modulation of Covalent Interactions in the Confined Channels of Covalent Organic Frameworks

Controllable regulations on the enzyme conformation to optimize catalytic performance are highly desired for the immobilized biocatalysts yet remain challenging. Covalent organic frameworks (COFs) possess confined channels with finely tunable pore environment, offering a promising platform for enzyme encapsulation. Herein, we covalently immobilized the cytochrome c (Cyt c) in the size-matched channels of COFs with different contents of anchoring site, and significant enhancement of the stability and activity (≈600 % relative activity compared with free enzyme) can be realized by optimizing the covalent interactions. Structural analyses on the immobilized Cyt c suggest that covalent bonding could induce conformational perturbation resulting in more accessible active sites. The effectiveness of the covalent interaction modulation together with the tailorable confined channels of COFs offers promise to develop high-performance biocatalysts.

Immobilization of Fungal Cellulases Highlighting β-Glucosidase: Techniques, Supports, Chemical, and Physical Changes

β-Glucosidase is widely used in several industrial segments, among which we can highlight the pharmaceutical industry, beverages, biofuels, animal feed production, and the textile industry. The great applicability of this enzyme, associated with the high cost of its production, justifies the need to find ways to make its use economically viable on an industrial scale. Through enzyme immobilization, the biocatalyst can be reused more than once, without great impact on its catalytic activity, and higher operational and storage stabilities can be achieved as compared to the free form. Accordingly, this review brings information about different techniques and supports that have been studied in the immobilization of cellulases with a focus on β-glucosidase, as well as the application of these immobilized systems to supplement commercial mixtures.

Fabrication of a magnetic nanocarrier for doxorubicin delivery based on hyperbranched polyglycerol and carboxymethyl cellulose: An investigation on the effect of borax cross-linker on pH-sensitivity

A new core-shell pH-responsive nanocarrier was prepared based on magnetic nanoparticle (MNP) core. Magnetic nanoparticles were first modified with hyperbranched polyglycerol as the first shell. Then the magnetic core was decorated with doxorubicin anticancer drug (DOX) and covered with PEGylated carboxymethylcellulose as the second shell. Borax was used to partially cross-link organic shells in order to evaluate drug loading content and pH-sensitivity. The structure of nanocarrier, organic shell loadings, magnetic responsibility, morphology, size, dispersibility, and drug loading content were investigated by IR, NMR, TG, VSM, XRD, DLS, HR-TEM and UV-Vis analyses. In vitro release investigations demonstrated that the use of borax as cross-linker between organic shells make the nanocarrier highly sensitive to pH so that more that 70% of DOX is released in acidic pH. A reverse pH-sensitivity was observed for the nanocarrier without borax cross-linker. The MTT assay determined that the nanocarrier exhibited excellent biocompatibility toward normal cells (HEK-293) and high toxicity against cancerous cells (HeLa). The nanocarrier also showed high hemocompatibility. Cellular uptake revealed high ability of nanocarrier toward HeLa cells comparable with free DOX. The results also suggested that low concentration of nanocarrier has a great potential for use as contrast agent in magnetic resonance imaging (MRI).

Roles of Surfactants in Oriented Immobilization of Cellulase on Nanocarriers and Multiphase Hydrolysis System

Surfactants, especially non-ionic surfactants, play an important role in the preparation of nanocarriers and can also promote the enzymatic hydrolysis of lignocellulose. A broad overview of the current status of surfactants on the immobilization of cellulase is provided in this review. In addition, the restricting factors in cellulase immobilization in the complex multiphase hydrolysis system are discussed, including the carrier structure characteristics, solid-solid contact obstacles, external diffusion resistance, limited recycling frequency, and nonproductive combination of enzyme active centers. Furthermore, promising prospects of cellulase-oriented immobilization are proposed, including the hydrophilic-hydrophobic interaction of surfactants and cellulase in the oil-water reaction system, the reversed micelle system of surfactants, and the possible oriented immobilization mechanism.

Saccharification of acid-alkali pretreated sugarcane bagasse using immobilized enzymes from Phomopsis stipata

In this study, a mild-temperature two-step dilute acid and alkaline pretreatment (DA-AL) process was developed to generate highly digestible cellulose pulp from sugarcane bagasse for producing fermentable sugars by novel thermophilic cellulases derived from Phomopsis stipata SC 04. First, DA pretreatment of sugarcane bagasse at 2% (w/v) H2SO4 and 121 °C for 71 min, followed by AL pretreatment at 2.2% (w/v) NaOH and 110 °C for 100 min led to the pulp containing 86% cellulose. The cellulose pulp was hydrolyzed by the immobilized P. stipata cellulase on Ca-alginate beads, following optimization of immobilization conditions. The results showed that mixing the cellulase extract and sodium alginate solutions at a volume ratio of 1:4 led to the highest immobilization efficiencies of 99.83% for β-glucosidase and 97.52% for endoglucanase while the enzyme leakage was the lowest. The use of the immobilized cellulases led to a cellulose digestibility of 30% in the initial batch and recycling of the immobilized cellulases reduced cellulose digestibility to 18% after s recycling for two times (a total of third rounds). Overall, this study provides useful information in the use of a mild pretreatment process to produce highly digestible cellulose pulp and in the immobilization of thermophilic cellulases to produce fermentable sugars from pretreated biomass.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s13205-021-03101-2.

Biogenic enabled in-vitro synthesis of nickel cobaltite nanoparticle and its application in single stage hybrid biohydrogen production

In biomass to biofuels production technology enzyme plays a key role. Nevertheless, the high production cost of cellulase enzyme is one of the critical issues in the economical production of biofuels. Nowadays, implementation of nanomaterials as catalyst is emerging as an innovative approach for the production of sustainable energy. In this context, synthesis of nickel cobaltite nanoparticles (NiCo₂O₄ NPs) via in vitro route has been conducted using fungus Emericella variecolor NS3 meanwhile; its impact has been evaluated on improved thermal and pH stability of crude cellulase enzyme obtained from Emericella variecolor NS3. Additionally, bioconversion of alkali treated rice straw using NiCo₂O₄ NPs stabilized cellulase produced sugar hydrolyzate which is further used for H₂ production via hybrid fermentation. Total 51.7 g/L sugar hydrolyzate produced 2978 mL/L cumulative H₂ production after 336 h along with maximum rate 34.12 mL/L/h in 24 h using Bacillus subtilis PF_1 and Rhodobacter sp. employed for dark and photo-fermentation, respectively.

A lipase/poly (ionic liquid)-styrene microspheres/PVA composite hydrogel for esterification application

Enzymes are particularly attractive as biocatalysts for the green synthesis of chemicals and pharmaceuticals. However, the traditional enzyme purification and separation process is complex and inefficient, which limits the wide application of enzyme catalysis. In this paper, an efficient strategy for enzyme purification and immobilization in one step is proposed. A novel poly (ionic liquid)-styrene microsphere is prepared by molecular design and synthesis for adsorbing and purifying high activity lipase from fermentation broth directly. By optimizing the surface morphologies and charge of the microspheres, the enzyme loading is significantly improved. In order to further stabilize the catalytic environment of lipase, the resulting lipase/poly (ionic liquid)-styrene microspheres are immobilized in physical crosslinking hydrogel to obtain a complex lipase catalytic system, which can be prepared into various shapes according to the requirements of catalytic environment. In the actual catalytic reaction process, this complex lipase catalytic system exhibits excellent catalytic activity (6314.69 ± 21.27 U mg^-1) and good harsh environment tolerance compared with the lipase fermentation broth (1672.87 ± 36.68 U mg^-1). Under the condition of cyclic catalysis, the complex lipase catalytic system shows the outstanding reusability (After 8 cycles the enzymatic activity is still higher than that of the lipase fermentation broth) and is easily separated from the products.

Fabrication of Cellulase Catalysts Immobilized on a Nanoscale Hybrid Polyaniline/Cationic Hydrogel Support for the Highly Efficient Catalytic Conversion of Cellulose

A novel conductive nanohydrogel hybrid support was prepared by in situ polymerization of polyaniline nanorods on an electrospun cationic hydrogel of poly(ε-caprolactone) and a cationic phosphine oxide macromolecule. Subsequently, the cellulase enzyme was immobilized on the hybrid support. Field-emission scanning electron microscopy and Brunauer-Emmett-Teller analyses confirmed a mesoporous, rod-like structure with a slit-like pore geometry for the immobilized support and exhibiting a high immobilization capacity and reduced diffusion resistance of the substrate. For comparison, the catalytic activity, storage stability, and reusability of the immobilized and free enzymes were evaluated. The results showed that the immobilized enzymes have higher thermal stability without changes in the optimal pH (5.5) and temperature (55 °C) for enzyme activity. A high immobilization efficiency (96%) was observed for the immobilized cellulose catalysts after optimization of parameters such as the pH, temperature, incubation time, and protein concentration. The immobilized enzyme retained almost 90% of its original activity after 4 weeks of storage and 73% of its original activity after the ninth reuse cycle. These results strongly suggest that the prepared hybrid support has the potential to be used as a support for protein immobilization.

Nanobiocatalysts for efficacious bioconversion of ionic liquid pretreated sugarcane tops biomass to biofuel

This work aimed to study the hydrolysis of ionic liquid (IL) pretreated sugarcane tops (SCT) biomass with in-house developed IL-stable enzyme preparation, from a fungal isolate Aspergillus flavus PN3. Maximum reducing sugar yield (181.18 mg/g biomass) was obtained from tris (2-hydroxyethyl) methylammonium-methylsulfate ([TMA]MeSO₄) pretreated biomass. Pretreatment parameters were optimized to attain enhanced sugar yield (1.57-fold). Functional mechanism of IL mediated pretreatment of SCT biomass was elucidated by SEM, XRD, FTIR and ¹H NMR studies. Furthermore, nanobiocatalysts prepared by immobilization of enzyme preparation by covalent coupling on magnetic nanoparticles functionalized with amino-propyl triethoxysilane, were assessed for their hydrolytic efficacy and reusability. Nanobiocatalysts were examined by SEM and FTIR analysis for substantiation of immobilization. This is the first ever report of application of magnetic nanobiocatalysts for saccharification of IL-pretreated sugarcane tops biomass.

Enzymatic characteristics of immobilized carbonic anhydrase and its applications in CO2 conversion

Native carbonic anhydrase (CA) has been widely used in several different applications due to its catalytic function in the interconversion of carbon dioxide (CO₂) and carbonic acid. However, subject to its stability and recyclability, native CA often deactivates when in harsh environments, which restricts its applications in the commercial market. Maintaining the stability and high catalytic activity of CA is challenging. Immobilization provides an effective route that can improve enzymatic stability. Through the interaction of covalent bonds and van der Waals forces, water-soluble CA can be combined with various insoluble supports to form water-insoluble immobilized CA so that CA stability and utilization can be greatly improved. However, if the immobilization method or immobilization condition is not suitable, it often leads to a decrease in CA activity, reducing the application effects on CO₂ conversion. In this review, we discuss existing immobilization methods and applications of immobilized CA in the environmental field, such as the mineralization of carbon dioxide and multienzyme cascade catalysis based on CA. Additionally, prospects in current development are outlined. Because of the many outstanding and superior properties after immobilization, CA is likely to be used in a wide variety of scientific and technical areas in the future.

Chemical and physical Chitosan modification for designing enzymatic industrial biocatalysts: How to choose the best strategy?

Chitosan is one of the most abundant natural polymer worldwide, and due to its inherent characteristics, its use in industrial processes has been extensively explored. Because it is biodegradable, biocompatible, non-toxic, hydrophilic, cheap, and has good physical-chemical stability, it is seen as an excellent alternative for the replacement of synthetic materials in the search for more sustainable production methodologies. Thus being, a possible biotechnological application of Chitosan is as a direct support for enzyme immobilization. However, its applicability is quite specific, and to overcome this issue, alternative pretreatments are required, such as chemical and physical modifications to its structure, enabling its use in a wider array of applications. This review aims to present the topic in detail, by exploring and discussing methods of employment of Chitosan in enzymatic immobilization processes with various enzymes, presenting its advantages and disadvantages, as well as listing possible chemical modifications and combinations with other compounds for formulating an ideal support for this purpose. First, we will present Chitosan emphasizing its characteristics that allow its use as enzyme support. Furthermore, we will discuss possible physicochemical modifications that can be made to Chitosan, mentioning the improvements obtained in each process. These discussions will enable a comprehensive comparison between, and an informed choice of, the best technologies concerning enzyme immobilization and the application conditions of the biocatalyst.

Preparation of regenerable magnetic nanoparticles for cellulase immobilization: Improvement of enzymatic activity and stability

To obtain regenerable magnetic nanoparticles, triethoxy(3-isocyanatopropyl)silane and iminodiacetic acid (IZ) were used as the starting material and immobilized on Fe₃ O₄ nanoparticles. Copper ions (Cu²⁺ ions) were loaded on the Fe-IZ nanoparticles and used for cellulase immobilization. The support was characterized by spectroscopic methods (FTIR, NMR) and thermogravimetric analysis, transmission electron microscopy, scanning electron microscope, X-ray diffraction, energy dispersive X-ray analysis, and vibrating sample magnetometer techniques. As a result of experiments, the amount of protein bound to immobilized cellulase (Fe-IZ-Cu-E) and cellulase activity was found to be 33.1 mg/g and 154 U/g at pH 5, 50°C, for 3 h. The results indicated that the free cellulase had kept only 50% of its activity after 2 h, while the Fe-IZ-Cu-E was observed to be around 77%, at 60°C. It was found that the immobilized cellulase maintained 93% of its initial catalytic activity after its sixth use. Furthermore, the Fe-IZ-Cu-E retained about 75% of its initial activity after 28 days of storage. To reuse the support material (Fe-IZ-Cu), it was regenerated by thorough washing with ammonia or imidazole.

Immobilization of endoglucanase on kaolin by adsorption and covalent bonding

In the current research, endoglucanase, one of the enzymes of the cellulolytic complex, was immobilized on kaolin by two different techniques, adsorption, and covalent bonding. A comparative study was conducted between free, adsorbed, and covalently immobilized endoglucanase. For the covalent bonding, the kaolin particles were functionalized with 3-aminopropyltriethoxysilane (APTES) and activated with glutaraldehyde. Immobilization by adsorption was performed using the kaolin without any treatment. Recovered activities after the endoglucanase immobilization by adsorption and covalent bonding were found to be 60 ± 2.5 and 65 ± 3.5%, respectively. The studies of optima pH and temperature, as well as thermal stability, showed that the catalytic characteristic of the enzyme was maintained after the immobilization by both adsorption and covalent bonding. Even after 8 cycles of use, the endoglucanase immobilized by the two techniques retained about 86% of its initial activity. The results showed that the adsorption was as effective as covalent bonding for the immobilization of endoglucanase on kaolin. However, the adsorption technique seems to have a greater potential for use in future studies, as it is simpler, cheaper, and faster than covalent immobilization. Therefore, in this work it was demonstrated that endoglucanases can be immobilized efficiently on kaolin through a very simple immobilization protocol, offering a promising strategy for performing repeated enzymatic hydrolysis reactions.

Activity, stability, and binding capacity of β-galactosidase immobilized on electrospun nylon-6 fiber membrane

In this research, we explored various immobilized enzyme support materials, including the novel nylon-6 fiber membrane (NFM), and evaluated the increase in surface area and its effect on enzyme binding potential. We also manipulated incubation and reaction conditions and assessed the subsequent effects on activity and stability of β-galactosidase, with comparisons between various solid support materials and free (dissolved) enzyme. Nylon-6 fiber membranes were created by electrospinning and were compared with other materials as solid supports for enzyme binding. The other materials included polyvinylidene fluoride 5-kDa nanofiltration dairy membranes, nylon-6 pellets, and silica glass beads. Scanning electron microscopy revealed the large surface area of NFM, which correlated with greater enzyme activity compared with the relatively flatter surfaces of the other solid support materials. Enzyme activity was measured spectrophotometrically with the color-changing substrate o-nitrophenyl-β-d-galactopyranoside. Compared with the other solid supports, NFM had greater maximum enzyme binding potential. Across pH conditions ranging from 3.5 to 6.0 (including the optimal pH of 4.0-5.0), enzyme activity was maintained on the membrane-immobilized samples, whereas free enzyme did not maintain activity. Altering the storage temperature (4, 22, and 50°C) affected enzyme stability (i.e., the ability of the enzyme to maintain activity over time) of free and polyvinylidene fluoride membrane samples. However, NFM samples maintained stability across the varying storage temperatures. Increasing the immobilization solution enzyme concentration above the maximum enzyme binding capacity had no significant effect on enzyme stability for membrane-immobilized samples; however, both had lower mean stability than free enzyme by approximately 74%. With further development, β-galactosidase immobilized on NFM or other membranes could be used in continuous processing in the dairy industry for a combination of filtration and lactose hydrolysis-creating products that are reduced in lactose and increased in sweetness, with no requirement for "added sugars" on the nutrition label and no enzyme listed as final product ingredient.

Highly Efficient Chemoenzymatic Synthesis of l-Phosphinothricin from N-Phenylacetyl-d,l-phosphinothricin by a Robust Immobilized Amidase

A chemoenzymatic strategy was developed for the highly efficient synthesis of l-phosphinothricin employing a robust immobilized amidase. An enzymatic hydrolysis of 500 mM N-phenylacetyl-d,l-phosphinothricin resulted in 49.9% conversion and 99.9% ee of l-phosphinothricin within 6 h. To further evaluate the bioprocess for l-phosphinothricin production, the biotransformation was performed for 100 batches under a stirred tank reactor with an average productivity of 8.21 g L^-1 h^-1. Moreover, unreacted N-phenylacetyl-d-phosphinothricin was racemized and subjected to the enzymatic hydrolysis, giving l-phosphinothricin with a 22.3% yield. A total yield of 69.4% was achieved after one recycle of N-phenylacetyl-d-phosphinothricin. Significantly, this chemoenzymatic approach shows great potential in the industrial production of l-phosphinothricin.

A comprehensive review on incredible renewable carriers as promising platforms for enzyme immobilization & thereof strategies

Enzymes are the highly versatile bio-catalysts having the potential for being employed in biotechnological and industrial sectors to catalyze biosynthetic reactions over a commercial point of view. Immobilization of enzymes has improved catalytic properties, retention activities, thermal and storage stabilities as well as reusabilities of enzymes in synthetic environments that have enthralled significant attention over the past few years. Dreadful efforts have been emphasized on the renewable and synthetic supports/composite materials to reserve their inherent characteristics such as biocompatibility, non-toxicity, accessibility of numerous reactive sites for profitable immobilization of biological molecules that often serve diverse applications in the pharmaceutical, environmental, and energy sectors. Supports should be endowed with unique physicochemical properties including high specific surface area, hydrophobicity, hydrophilicity, enantioselectivities, multivalent functionalization which professed them as competent carriers for enzyme immobilization. Organic, inorganic, and nano-based platforms are more potent, stable, highly recovered even after used for continuous catalytic processes, broadly renders the enzymes to get efficiently immobilized to develop an inherent bio-catalytic system that displays higher activities as compared to free-counter parts. This review highlights the recent advances or developments on renewable and synthetic matrices that are utilized for the immobilization of enzymes to deliver emerging applications around the globe.

Immobilization and characterization of cellulase on hydroxy and aldehyde functionalized magnetic Fe2O3/Fe3O4 nanocomposites prepared via a novel rapid combustion process

In this work, magnetic Fe₂O₃/Fe₃O₄ nanocomposites were prepared via a novel rapid combustion process. The silica was precipitated on the surface of Fe₂O₃/Fe₃O₄ nanocomposites. The silica-coated magnetic nanocomposites were cross-linked with glutaraldehyde, on which cellulase was covalently immobilized. The morphology, composition, and property of the prepared nanomaterials were characterized by the scanning electron microscopy (SEM), the energy dispersive spectrometry (EDS), the X-ray diffraction (XRD), the vibrating sample magnetometer (VSM), and the Fourier transform infrared (FTIR) spectroscopy. The immobilization conditions were optimized by varying operating parameters and determined to be 0.05 mL of 0.5% cellulase solution for 2 h. The catalytic stabilities of the immobilized cellulase were evaluated. The results showed that the immobilized cellulases performed higher apparent activity at pH 4.5 and exhibited good thermal stability compared with their free counterparts. The Michaelis-Menten equation showed that K_m and V_max of free cellulase were 3.46 mol·L^-1 and 0.53 mol·min^-1, respectively. The immobilized cellulase had higher K_m and V_max (18.99 mol·L^-1 and 0.59 mol·min^-1). The retained activity of the immobilized cellulase maintained over 71% of the initial activity after being used for five cycles.

Enhanced Catalytic Performance of Trichoderma reesei Cellulase Immobilized on Magnetic Hierarchical Porous Carbon Nanoparticles

Cellulase from Trichoderma reesei was immobilized by covalent or non-covalent binding onto magnetic hierarchical porous carbon (MHPC) nanomaterials. The immobilization yield and the enzyme activity were higher when covalent immobilization approach was followed. The covalent immobilization approach leads to higher immobilization yield (up to 96%) and enzyme activity (up to 1.35 U mg^-1) compared to the non-covalent cellulase binding. The overall results showed that the thermal, storage and operational stability of the immobilized cellulase was considerably improved compared to the free enzyme. The immobilized cellulose catalyzed the hydrolysis of microcrystalline cellulose up to 6 consecutive successive reaction cycles, with a total operation time of 144 h at 50 °C. The half-life time of the immobilized enzyme in deep eutectic solvents-based media was up to threefold higher compared to the soluble enzyme. The increased pH and temperature tolerance of the immobilized cellulase, as well as the increased operational stability in aqueous and deep eutectic solvents-based media indicate that the use of MHPCs as immobilization nanosupport could expand the catalytic performance of cellulolytic enzymes in various reaction conditions.

Synthesis of magnetic nanoparticles with an IDA or TED modified surface for purification and immobilization of poly-histidine tagged proteins

Magnetic nanoparticles (MNPs) chelating with metal ions can specifically interact with poly-histidine peptides and facilitate immobilization and purification of proteins with poly-histidine tags. Fabrication of MNPs is generally complicated and time consuming. In this paper, we report the preparation of Ni(ii) ion chelated MNPs (Ni-MNPs) in two stages for protein immobilization and purification. In the first stage, organic ligands including pentadentate tris (carboxymethyl) ethylenediamine (TED) and tridentate iminodiacetic acid (IDA) and inorganic Fe₃O₄–SiO₂ MNPs were synthesized separately. In the next stage, ligands were grafted to the surface of MNPs and MNPs with a TED or IDA modified surface were acquired, followed by chelating with Ni(ii) ions. The Ni(ii) ion chelated forms of MNPs (Ni-MNPs) were characterized including morphology, surface charge, structure, size distribution and magnetic response. Taking a his-tagged glycoside hydrolase DspB (Dispersin B) as the protein representative, specific interactions were confirmed between DspB and Ni-MNPs. Purification of his-tagged DspB was achieved with Ni-MNPs that exhibited better performance in terms of purity and activity of DspB than commercial Ni-NTA. Ni-MNPs as enzyme carriers for DspB also exhibited good compatibility and reasonable reusability as well as improved performance in various conditions.

This article reports a novel approach for synthesizing magnetic nanoparticles with a modified surface for purification and immobilization of histidine-tagged proteins.

Magnetic biochar derived from biosolids via hydrothermal carbonization: Enzyme immobilization, immobilized-enzyme kinetics, environmental toxicity

Magnetic and nonmagnetic biochar (MBC & BC) were produced from biosolids under hydrothermal conditions and characterized in order to understand surface chemistry impacts on enzyme immobilization and activity. Peak surface pore size of MBC was 180 nm and that of BC was 17 nm. Despite similar surface area (≈ 49 m²/g) MBC immobilized more laccase (99 mg/g) than biochar (31 mg/g). For horseradish peroxidase (HRP), the two biochars had similar immobilization capacity (≈ 65 mg/g). Laccase and HRP on MBC had 47.1 and 18.0% higher specific activity than on BC, respectively. The matrix activity of MBC-laccase (33.3 U/mg support) was 3.7-fold higher than BC-laccase (8.8 U/mg support) and higher than the same amount of free laccase (30.2 U) at pH 3.0 (P < 0.05). Although MBC had its own peroxide oxidation activity (104.1 and 165.9 U/mg biochar at pHs 5&6) this only accounted for 16.7 and 20.4% of the total MBC-H RP activity respectively. After 10 wash cycles, MBC still retained 79.3% and 60.3% of laccase and HRP activity, respectively. Additionally, MBC had lower acute toxicity, suggesting that it is relative benign from an environmental perspective.

Immobilization of fenugreek β-amylase onto functionalized tungsten disulfide nanoparticles using response surface methodology: Its characterization and interaction with maltose and sucrose

In this communication, fenugreek β-amylase was immobilized onto functionalized tungsten disulfide nanoparticles through cross-linker glutaraldehyde and successful immobilization was confirmed by SEM, AFM and FTIR spectroscopy. To make the process economical and efficient, optimization of independent variables was carried out using Box-Behnken design of response surface methodology. Approximately similar predicted (85.6%) and experimental (84.2%) immobilization efficiency revealed that the model is suitable for design of space. Optimum temperature was calculated to be 60 °C. After immobilization, an increased K_m (2.12 times) and a decreased V_max (0.58 times), indicated inaccessibility of active site residues to the substrate. The immobilized enzyme retained 77% relative activity after 10 uses whereas 40% residual activity was obtained after 120 days. An increased half-life with concomitantly decreased kinetic rate constant revealed that the immobilized enzyme is more stable at a higher temperature and the process followed first-order kinetics (R² > 0.93). The limit of detection for maltose and sucrose fluorescence biosensor was found to be 0.052 and 0.096 mM, respectively. Thermodynamic parameters such as changes in Gibbs free energy (ΔG < 0), enthalpy (ΔH > 0) and entropy (ΔS >0) revealed that the process is spontaneous and endothermic, driven by hydrophobic interactions. Thermo-stability data at higher temperature for the immobilized enzyme makes it a suitable candidate for industrial applications in the production of maltose in food and pharmaceutical industries. Furthermore, fluorescence biosensor could be used to detect and quantify maltose and sucrose to maintain the quality of industrial products.

Layered Co-Immobilization of β-Glucosidase and Cellulase on Polymer Film by Visible-Light-Induced Graft Polymerization

Exploring a suitable immobilization strategy to improve catalytic efficiency and reusability of cellulase is of great importance to lowering the cost and promoting the industrialization of cellulose-derived bioethanol. In this work, a layered structure with a thin PEG hydrogel as the inner layer and sodium polyacrylate (PAANa) brush as the outer layer was fabricated on low density polyethylene (LDPE) film by visible-light-induced graft polymerization. Two enzymes, β-glucosidase (BG) and cellulase, were separately coimmobilized onto this hierarchical film. As supplementary to cellulase for improving catalytic efficiency, BG was in situ entrapped into the inner PEG hydrogel layer during the graft polymerization from the LDPE surface. After graft polymerization of sodium acrylate on the PEG hydrogel layer was reinitiated, cellulase was covalently attached on the outer PAANa brush layer. Owing to the mild reaction condition (visible-light irradiation and room temperature), the immobilized BG could retain a high activity after the graft polymerization. The immobilization did not alter the optimal pH and temperature of BG or the optimal temperature of cellulase. However, the optimal pH of cellulase shifts to 5.0 after immobilization. Compared with the original activity of single cellulase system and isolated BG/cellulase immobilization system, the dual-enzyme system exhibited 82% and 20% increase in catalytic activity, respectively. The dual-enzyme system could maintain 93% of carboxymethylcellulose sodium salt (CMC) activity after repeating 10 cycles of hydrolysis and 89% of filter paper activity after 6 cycles relative to original activity, exhibiting excellent reusability. This layer coimmobilization system of BG and cellulase on the polymer film displays tremendous potential for practical application in a biorefinery.

Recent Developments in Carriers and Non-Aqueous Solvents for Enzyme Immobilization

Immobilization techniques are generally based on reusing enzymes in industrial applications to reduce costs and improve enzyme properties. These techniques have been developing for decades, and many methods for immobilizing enzymes have been designed. To find a better immobilization method, it is necessary to review the recently developed methods and have a clear overview of the advantages and limitations of each method. This review introduces the recently reported immobilization methods and discusses the improvements in enzyme properties by different methods. Among the techniques to improve enzyme properties, metal–organic frameworks, which have diverse structures, abundant organic ligands and metal nodes, offer a promising platform.

Enhancement and Mechanism of a Lignin Amphoteric Surfactant on the Production of Cellulosic Ethanol from a High-Solid Corncob Residue

A lignin amphoteric surfactant and betaine could enhance the enzymatic hydrolysis of lignocellulose and recover cellulase. The effects of lignosulfonate quaternary ammonium salt (SLQA) and dodecyl dimethyl betaine (BS12) on enzymatic hydrolysis digestibility, ethanol yield, yeast cell viability, and other properties of high-solid enzymatic hydrolysis and fermentation of a corncob residue were studied in this research. The results suggested that SLQA and 1 g/L BS12 effectively improved the ethanol yield through enhancing enzymatic hydrolysis. SLQA had no significant effect on the yeast cell membrane and glucose fermentation. However, 5 g/L BS12 reduced the ethanol yield as a result of the fact that 5 g/L BS12 damaged the yeast cell membrane and inhibited the conversion of glucose to ethanol. Our research also suggested that 1 g/L BS12 enhanced the ethanol yield of corncob residue fermentation, which was attributed to the fact that lignin in the corncob adsorbed BS12 and decreased its concentration in solution to a safe level for the yeast.