Impacts of Carbon Dots on Rice Plants: Boosting the Growth and Improving the Disease Resistance

Unlocking the potential of carbon dots in agriculture using data-driven approaches

The utilization of carbon dots (CDs) in agriculture to enhance plant growth has gained significant attention, but the data remains fractionated. Systematically integrating existing data is needed to identify the factors driving the interactions between CDs and plants and strategically guide future research. Articles reporting on CDs and their effects on plants were searched based on inclusion and exclusion criteria, resulting in the collection of 71 articles comprising a total of 2564 data points. The meta-analysis reveals that the soil and foliar application of red-emitting bio-derived CDs at a low concentration (<10 ppm) leads to the most beneficial effects on plant growth. Random forest and gradient boosting algorithms revealed that the size and dose of CDs were important factors in predicting plant responses across multiple aspects (CDs properties, plant properties, environmental factors, and experimental conditions). Specifically, smaller sizes are more favorable to growth indicators (GI) below 6 nm, nutrient and quality (NuQ) at 3-6 nm, photosynthesis (PSN) below 7 nm, and antioxidant responses (AR) below 5 nm. Overall, our analysis of existing data suggests that CDs applications can significantly improve plant responses (GI, NuQ, PSN, and AR) by 10-39 %. To unlock the full potential of CDs, customized synthesis techniques should be employed to meet the specific requirements of different crops and climate condition. For example, we recommend the synthesis of small CDs (<7 nm) with emission peak values falling within the range of 405-475 and 610-670 nm to enhance plant growth. The global prediction of plant responses to CDs application in future scenarios have shown significant improvements ranging from 17 to 58 %, suggesting that CDs have widespread applicability. This novel understanding of the impact of CDs on plant response provides valuable insights for optimizing the application of these nanomaterials in agriculture.

Carbon Nanodot-Microbe-Plant Nexus in Agroecosystem and Antimicrobial Applications

The intensive applications of nanomaterials in the agroecosystem led to the creation of several environmental problems. More efforts are needed to discover new insights in the nanomaterial-microbe-plant nexus. This relationship has several dimensions, which may include the transport of nanomaterials to different plant organs, the nanotoxicity to soil microbes and plants, and different possible regulations. This review focuses on the challenges and prospects of the nanomaterial-microbe-plant nexus under agroecosystem conditions. The previous nano-forms were selected in this study because of the rare, published articles on such nanomaterials. Under the study's nexus, more insights on the carbon nanodot-microbe-plant nexus were discussed along with the role of the new frontier in nano-tellurium-microbe nexus. Transport of nanomaterials to different plant organs under possible applications, and translocation of these nanoparticles besides their expected nanotoxicity to soil microbes will be also reported in the current study. Nanotoxicity to soil microbes and plants was investigated by taking account of morpho-physiological, molecular, and biochemical concerns. This study highlights the regulations of nanotoxicity with a focus on risk and challenges at the ecological level and their risks to human health, along with the scientific and organizational levels. This study opens many windows in such studies nexus which are needed in the near future.

An assessment of nanotechnology-based interventions for cleaning up toxic heavy metal/metalloid-contaminated agroecosystems: Potentials and issues

Heavy metals (HMs) are among the most dangerous environmental variables for a variety of life forms, including crops. Accumulation of HMs in consumables and their subsequent transmission to the food web are serious concerns for scientific communities and policy makers. The function of essential plant cellular macromolecules is substantially hampered by HMs, which eventually have a detrimental effect on agricultural yield. Among these HMs, three were considered, i.e., arsenic, cadmium, and chromium, in this review, from agro-ecosystem perspective. Compared with conventional plant growth regulators, the use of nanoparticles (NPs) is a relatively recent, successful, and promising method among the many methods employed to address or alleviate the toxicity of HMs. The ability of NPs to reduce HM mobility in soil, reduce HM availability, enhance the ability of the apoplastic barrier to prevent HM translocation inside the plant, strengthen the plant's antioxidant system by significantly enhancing the activities of many enzymatic and nonenzymatic antioxidants, and increase the generation of specialized metabolites together support the effectiveness of NPs as stress relievers. In this review article, to assess the efficacy of various NP types in ameliorating HM toxicity in plants, we adopted a 'fusion approach', in which a machine learning-based analysis was used to systematically highlight current research trends based on which an extensive literature survey is planned. A holistic assessment of HMs and NMs was subsequently carried out to highlight the future course of action(s).

The characterization of plant derived-carbon dots and its responses on chlorophyll a fluorescence kinetics, radical accumulation in guard cells, cellular redox state and antioxidant system in chromium stressed-Lactuca sativa

Based on their chemical structure and catalytic features, carbon dots (CDs) demonstrate great advantages for agricultural systems. The improvements in growth, photosynthesis, nutrient assimilation and resistance are provided by CDs treatments under control or adverse conditions. However, there is no data on how CDs can enhance the tolerance against chromium toxicity on gas exchange, photosynthetic machinery and ROS-based membrane functionality. The present study was conducted to evaluate the impacts of the different concentrations of orange peel derived-carbon dots (50-100-200-500 mg L-1 CD) on growth, chlorophyll fluorescence, phenomenological fluxes between photosystems, photosynthetic performance, ROS accumulation and antioxidant system under chromium stress (Cr, 100 μM chromium (VI) oxide) in Lactuca sativa. CDs removed the Cr-reduced changes in growth (RGR), water content (RWC) and proline (Pro) content. Compared to stress, CD exposures caused an alleviation in carbon assimilation rate, stomatal conductance, transpiration rate, carboxylation efficiency, chlorophyll fluorescence (Fv/Fm) and potential photochemical efficiency (Fv/Fo). Cr toxicity disrupted the energy fluxes (ABS/RC, TRo/RC, ETo/RC and DIo/RC), quantum yields and, efficiency (ΨEo and φRo), dissipation of energy (DIo/RC) and performance index (PIABS and PItotal). An amelioration in these parameters was provided by CD addition to Cr-applied plants. Stressed plants had high activities of superoxide dismutase (SOD), peroxidase (POX) and ascorbate peroxidase (APX), which could not prevent the increase of H2O2 and lipid peroxidation (TBARS content). While all CDs induced SOD and catalase (CAT) in response to stress, POX and enzyme/non-enzymes related to ascorbate-glutathione (AsA-GSH) cycle (APX, monodehydroascorbate reductase (MDHAR) and dehydroascorbate reductase (DHAR), the contents of AsA and, GSH) were activated by 50-100-200 mg L-1 CD. CDs were able to protect the AsA regeneration, GSH/GSSG and GSH redox status. The decreases in H2O2 content might be attributed to the increased activity of glutathione peroxidase (GPX). Therefore, all CD applications minimized the Cr stress-based disturbances (TBARS content) by controlling ROS accumulation, antioxidant system and photosynthetic machinery. In conclusion, CDs have the potential to be used as a biocompatible inducer in removing the adverse effects of Cr stress in lettuce plants.

Carbon Nanomaterials for Plant Priming through Mechanostimulation: Emphasizing the Role of Shape

The use of nanomaterials to improve plant immunity for sustainable agriculture is gaining increasing attention; yet, the mechanisms involved remain unclear. In contrast to metal-based counterparts, carbon-based nanomaterials do not release components. Determining how these carbon-based nanomaterials strengthen the resistance of plants to diseases is essential as well as whether shape influences this process. Our study compared single-walled carbon nanotubes (SWNTs) and graphene oxide (GO) infiltration against the phytopathogen Pseudomonas syringae pv tomato DC3000. Compared with plants treated with GO, plants primed with SWNTs showed a 29% improvement in the pathogen resistance. Upon nanopriming, the plant displayed wound signaling with transcriptional regulation similar to that observed under brushing-induced mechanostimulation. Compared with GO, SWNTs penetrated more greatly into the leaf and improved transport, resulting in a heightened wound response; this effect resulted from the tubular structure of SWNTs, which differed from the planar form of GO. The shape effect was further demonstrated by wrapping SWNTs with bovine serum albumin, which masked the sharp edges of SWNTs and resulted in a significant decrease in the overall plant wound response. Finally, we clarified how the local wound response led to systemic immunity through increased calcium ion signaling in distant plant areas, which increased the antimicrobial efficacy. In summary, our systematic investigation established connections among carbon nanomaterial priming, mechanostimulation, and wound response, revealing recognition patterns in plant immunity. These findings promise to advance nanotechnology in sustainable agriculture by strengthening plant defenses, enhancing resilience, and reducing reliance on traditional chemicals.

The Impact of Nanomaterials on Photosynthesis and Antioxidant Mechanisms in Gramineae Plants: Research Progress and Future Prospects

As global food security faces challenges, enhancing crop yield and stress resistance becomes imperative. This study comprehensively explores the impact of nanomaterials (NMs) on Gramineae plants, with a focus on the effects of various types of nanoparticles, such as iron-based, titanium-containing, zinc, and copper nanoparticles, on plant photosynthesis, chlorophyll content, and antioxidant enzyme activity. We found that the effects of nanoparticles largely depend on their chemical properties, particle size, concentration, and the species and developmental stage of the plant. Under appropriate conditions, specific NMs can promote the root development of Gramineae plants, enhance photosynthesis, and increase chlorophyll content. Notably, iron-based and titanium-containing nanoparticles show significant effects in promoting chlorophyll synthesis and plant growth. However, the impact of nanoparticles on oxidative stress is complex. Under certain conditions, nanoparticles can enhance plants' antioxidant enzyme activity, improving their ability to withstand environmental stresses; excessive or inappropriate NMs may cause oxidative stress, affecting plant growth and development. Copper nanoparticles, in particular, exhibit this dual nature, being beneficial at low concentrations but potentially harmful at high concentrations. This study provides a theoretical basis for the future development of nanofertilizers aimed at precisely targeting Gramineae plants to enhance their antioxidant stress capacity and improve photosynthesis efficiency. We emphasize the importance of balancing the agricultural advantages of nanotechnology with environmental safety in practical applications. Future research should focus on a deeper understanding of the interaction mechanisms between more NMs and plants and explore strategies to reduce potential environmental impacts to ensure the health and sustainability of the ecosystem while enhancing the yield and quality of Gramineae crops.

Unique properties of titanium dioxide quantum dots assisted regulation of growth and biochemical parameters of Hibiscus sabdariffa plants

Owing to the uniqueness of quantum dots (QDs) as a potential nanomaterial for agricultural application, hence in the present study, titanium dioxide quantum dots (TiO2 QDs) were successfully synthesized via sol-gel technique and the physico-chemical properties of the prepared TiO2 QDs were analyzed. Based on the results, the TiO2 QDs showed the presence of anatase phase of TiO2. TEM examination revealed spherical QDs morphology with an average size of 7.69 ± 1.22 nm. The large zeta potential value (-20.9 ± 2.3 mV) indicate greater stability of the prepared TiO2 QDs in aqueous solutions. Moreover, in this work, the application of TiO2 QDs on Hibiscus sabdariffa plants was conducted, where H. sabdariffa plants were foliar sprayed twice a week in the early morning with different concentrations of TiO2 QDs (0, 2, 5, 10, 15 and 30 ppm) to evaluate their influence on these plants in terms of morphological indexes and biochemical parameters. The results exhibited an increasing impact of the different used concentrations of TiO2 QDs on morphological indexes, such as fresh weight, dry weight, shoot length, root length, and leaf number, and physio-biochemical parameters like chlorophyll a, chlorophyll b, carotenoid contents, total pigments and total phenolic contents. Remarkably, the most prominent result was recorded at 15 ppm TiO2 QDs where plant height, total protein and enzymatic antioxidants like catalase and peroxidase were noted to increase by 47.6, 20.5, 29.5 and 38.3%, respectively compared to control. Therefore, foliar spraying with TiO2 QDs positively serves as an effective strategy for inducing optimistic effects in H. sabdariffa plants.

Targeted Delivery of Sucrose-Coated Nanocarriers with Chemical Cargoes to the Plant Vasculature Enhances Long-Distance Translocation

Current practices for delivering agrochemicals are inefficient, with only a fraction reaching the intended targets in plants. The surfaces of nanocarriers are functionalized with sucrose, enabling rapid and efficient foliar delivery into the plant phloem, a vascular tissue that transports sugars, signaling molecules, and agrochemicals through the whole plant. The chemical affinity of sucrose molecules to sugar membrane transporters on the phloem cells enhances the uptake of sucrose-coated quantum dots (sucQD) and biocompatible carbon dots with β-cyclodextrin molecular baskets (suc-β-CD) that can carry a wide range of agrochemicals. The QD and CD fluorescence emission properties allowed detection and monitoring of rapid translocation (<40 min) in the vasculature of wheat leaves by confocal and epifluorescence microscopy. The suc-β-CDs more than doubled the delivery of chemical cargoes into the leaf vascular tissue. Inductively coupled plasma mass spectrometry (ICP-MS) analysis showed that the fraction of sucQDs loaded into the phloem and transported to roots is over 6.8 times higher than unmodified QDs. The sucrose coating of nanoparticles approach enables unprecedented targeted delivery to roots with ≈70% of phloem-loaded nanoparticles delivered to roots. The use of plant biorecognition molecules mediated delivery provides an efficient approach for guiding nanocarriers containing agrochemicals to the plant vasculature and whole plants.

Structural Features of Carbon Dots and Their Agricultural Potential

Carbon dots (CDs) have drawn attention due to their enticing physical, chemical, and surface properties. Besides, good conductivity, low toxicity, environmental friendliness, simple synthetic routes, and comparable optical properties are advantageous features of CDs. Further, recently, CDs have been explored for biological systems, including plants. Among biological systems, only plants form the basis for sustainability and life on Earth. In this Review, we reviewed suitable properties and applications of CDs, such as promoting the growth of agricultural plants, disease resistance, stress tolerance, and target transportation. Summing up the available studies, we believe that the applications of CDs are yet to be explored significantly for innovation and technology-based agriculture.

Cloning of maize chitinase 1 gene and its expression in genetically transformed rice to confer resistance against rice blast caused by Pyricularia oryzae

Fungal pathogens are one of the major reasons for biotic stress on rice (Oryza sativa L.), causing severe productivity losses every year. Breeding for host resistance is a mainstay of rice disease management, but conventional development of commercial resistant varieties is often slow. In contrast, the development of disease resistance by targeted genome manipulation has the potential to deliver resistant varieties more rapidly. The present study reports the first cloning of a synthetic maize chitinase 1 gene and its insertion in rice cv. (Basmati 385) via Agrobacterium-mediated transformation to confer resistance to the rice blast pathogen, Pyricularia oryzae. Several factors for transformation were optimized; we found that 4-week-old calli and an infection time of 15 minutes with Agrobacterium before colonization on co-cultivation media were the best-suited conditions. Moreover, 300 μM of acetosyringone in co-cultivation media for two days was exceptional in achieving the highest callus transformation frequency. Transgenic lines were analyzed using molecular and functional techniques. Successful integration of the gene into rice lines was confirmed by polymerase chain reaction with primer sets specific to chitinase and hpt genes. Furthermore, real-time PCR analysis of transformants indicated a strong association between transgene expression and elevated levels of resistance to rice blast. Functional validation of the integrated gene was performed by a detached leaf bioassay, which validated the efficacy of chitinase-mediated resistance in all transgenic Basmati 385 plants with variable levels of enhanced resistance against the P. oryzae. We concluded that overexpression of the maize chitinase 1 gene in Basmati 385 improved resistance against the pathogen. These findings will add new options to resistant germplasm resources for disease resistance breeding. The maize chitinase 1 gene demonstrated potential for genetic improvement of rice varieties against biotic stresses in future transformation programs.

MWCNTs Alleviated saline-alkali stress by optimizing photosynthesis and sucrose metabolism in rice seedling

Saline and alkali stress affects the growth and development, survival rate, and final yield of rice, while new nano materials can have a positive effect on rice growth. In order to investing the effects of carboxymethyl multi walled carbon nanotubes (MWCNTs) on the growth and development of rice seedlings under salt alkali stress, rice seedlings were cultured using rice variety "Songjing 3" using nutrient solution water culture method. The effects of MWCNTs on water absorption capacity, leaf photosynthesis, and sucrose metabolism of rice seedlings under 50 mmol/L saline-alkali stress (1NaCl: 9Na2SO4: 9NaHCO3: 1Na2CO3) conditions were investigated. The results showed that MWCNTs can improve the water use ability of roots and leaves, especially the water absorption ability of roots, which provides a guarantee for the improvement of rice biomass and the enhancement of leaf photosynthetic capacity under adverse conditions. After treatment with MWCNTs, the photosynthetic rate (Pn), stomatal conductance (gs), and transpiration rate (Tr) of leaves increased significantly, and the photochemical quenching value (qP), photochemical quantum efficiency value (Fv/Fm), and electron transfer rate value (ETR) of chlorophyll fluorescence parameters increased significantly, which is beneficial to the improvement of the PSII photosynthetic system. MWCNTs treatment promoted the increase of photosynthetic pigment content in leaves under salt and alkali stress, improved the ratio of Chla and Chlb parameters, increased the activities of key photosynthetic enzymes (RUBPCase and PEPCase) in leaves, increased the value of total lutein cycle pool (VAZ), and significantly enhanced the deepoxidation effect of lutein cycle (DEPS), which can effectively alleviate the stomatal and non stomatal constraints on leaf photosynthesis caused by salt and alkali stress. MWCNTs treatment significantly enhanced the activities of sucrose phosphate synthase (SPS) and sucrose synthase (SS) under salt and alkali stress, and decreased the activities of soluble acid invertase (SAInv) and alkaline/neutral invertase (A/N-Inv), indicating that MWCNTs promoted sucrose synthesis while inhibiting sucrose decomposition, thereby promoting sucrose accumulation in rice leaves. This study can provide theoretical and experimental basis for the application of MWCNTs to the production of rice under salt and alkali stress, and can find a new way for rice production in saline and alkaline lands.

Electrostatics Control Nanoparticle Interactions with Model and Native Cell Walls of Plants and Algae

A lack of mechanistic understanding of nanomaterial interactions with plants and algae cell walls limits the advancement of nanotechnology-based tools for sustainable agriculture. We systematically investigated the influence of nanoparticle charge on the interactions with model cell wall surfaces built with cellulose or pectin and performed a comparative analysis with native cell walls of Arabidopsis plants and green algae (Choleochaete). The high affinity of positively charged carbon dots (CDs) (46.0 ± 3.3 mV, 4.3 ± 1.5 nm) to both model and native cell walls was dominated by the strong ionic bonding between the surface amine groups of CDs and the carboxyl groups of pectin. In contrast, these CDs formed weaker hydrogen bonding with the hydroxyl groups of cellulose model surfaces. The CDs of similar size with negative (-46.2 ± 1.1 mV, 6.6 ± 3.8 nm) or neutral (-8.6 ± 1.3 mV, 4.3 ± 1.9 nm) ζ-potentials exhibited negligible interactions with cell walls. Real-time monitoring of CD interactions with model pectin cell walls indicated higher absorption efficiency (3.4 ± 1.3 10-9) and acoustic mass density (313.3 ± 63.3 ng cm-2) for the positively charged CDs than negative and neutral counterparts (p < 0.001 and p < 0.01, respectively). The surface charge density of the positively charged CDs significantly enhanced these electrostatic interactions with cell walls, pointing to approaches to control nanoparticle binding to plant biosurfaces. Ca2+-induced cross-linking of pectin affected the initial absorption efficiency of the positively charged CD on cell wall surfaces (∼3.75 times lower) but not the accumulation of the nanoparticles on cell wall surfaces. This study developed model biosurfaces for elucidating fundamental interactions of nanomaterials with cell walls, a main barrier for nanomaterial translocation in plants and algae in the environment, and for the advancement of nanoenabled agriculture with a reduced environmental impact.

Dynamics of organic acid exudation and rhizobacteria in maize rhizosphere respond to N-CDs

To sustainably feed the growing global population, it is essential to increase crop yields on limited land while reducing the use of fertilizers and agrochemicals. The rhizosphere regulation shows significant potential to address this challenge. Here, foliar applied doping of nitrogen in carbon dots (N-CDs) entered maize leaves, and were transported to the stems and roots. The internalized N-CDs significantly increased the biomass (26.4-93.8%) and photosynthesis (17.0-20.3 %) of maize seedling during the three-week application of N-CDs, providing the substrate for tricarboxylic acid cycle (TCA) in shoots and roots. Correspondingly, more organic acids involved in TCA cycle, such as citric acid (14.0-fold), succinic acid (4.4-fold) and malic acid (3.4-fold), were synthesized and then secreted into rhizosphere after exposed to N-CDs for one day. As the exposure time increased, greater secretion of above organic acids by the roots was induced. However, no significant change was observed in the relative abundance of rhizobacteria after foliar application with N-CDs for one day. After one week, the relative abundances of Azotobacter, Bacillus, Lysobacter, Mucilaginibacter, and Sphingomonas increased by 0.8-3.8 folds. The relative abundance of more beneficial rhizobacteria (Sphingomonas, Lysobacter, Rhizobium, Azotobacter, Pseudomonas, Mucilaginibacter and Bacillus) enriched by 0.3-6.0 folds after two weeks, and Sphingomonas, Flavisolibacter and Bacillus improved by 0.6-3.2 folds after three weeks. These dynamic changes suggested that N-CDs initiate the synthesis and secretion of organic acids and then recruited beneficial rhizobacteria. The hierarchical partitioning analysis further indicated that N-CDs-induced secretion of organic acids from the roots was the main drivers of rhizobacteria community dynamics. The differential microbes altered by N-CDs were mainly involved in nitrogen (N) and phosphorus (P) cycles, which are beneficial for N and P uptake, and maize growth. These results provide insights into understanding the rhizosphere regulation of nanomaterials to improve plant productivity and nutrient-use efficiency.

Boosting Plant Photosynthesis with Carbon Dots: A Critical Review of Performance and Prospects

Artificially augmented photosynthesis in nano-bionic plants requires tunable nano-antenna structures with physiochemical and optoelectronic properties, as well as unique light conversion capabilities. The use of nanomaterials to promote light capture across photosystems, primarily by carbon dots, has shown promising results in enhancing photosynthesis through tunable uptake, translocation, and biocompatibility. Carbon dots possess the ability to perform both down and up-light conversions, making them effective light promoters for harnessing solar energy beyond visible light wavelengths.This review presents and discusses the recent progress in fabrication, chemistry, and morphology, as well as other properties such as photoluminescence and energy conversion efficiency of nano-antennas based on carbon dots. The performance of artificially boosted photosynthesis is discussed and then correlated with the conversion properties of carbon dots and how they are applied to plant models. The challenges related to the nanomaterial delivery and the performance evaluation practices in modified photosystems, consideration of the reliability of this approach, and the potential avenues for performance improvements through other types of nano-antennas based on alternative nanomaterials are also critically evaluated. It is anticipated that this review will stimulate more high-quality research in plant nano-bionics and provide avenues to enhance photosynthesis for future agricultural applications.

Physiological Functions of Carbon Dots and Their Applications in Agriculture: A Review

Carbon dots are carbon-based nanoparticles, which have the characteristics of a simple preparation process, photoluminescence, biocompatibility, an adjustable surface function, water solubility, and low-level toxicity. They are widely used in biological applications, such as imaging, biosensing, photocatalysis, and molecular transfer. They have also aroused great interest among researchers in agriculture, and there has been significant progress in improving crop growth and production. This review presents the physiological functions of carbon dots for crop growth and development, photosynthesis, water and nutrient absorption, and abiotic stress resistance and their applications in improving the ecological environment and agriculture as biosensors, and future application prospects and research directions of carbon dots in agriculture.

Recent developments, applications and challenges for carbon quantum dots as a photosynthesis enhancer in agriculture

Since the world's population is expanding, mankind may be faced with a huge dilemma in the future, which is food scarcity. The situation can be mitigated by employing sustainable cutting-edge agricultural methods to maintain the food supply chain. In recent years, carbon quantum dots (CQD), a member of the well-known carbon-based nanomaterials family, have given rise to a new generation of technologies that have the potential to revolutionise horticulture and agriculture research. CQD has drawn much attention from the research community in agriculture owing to their remarkable properties such as good photoluminescence behaviour, high biocompatibility, photo-induced electron transfer, low cost, and low toxicity. These unique properties have led CQD to become a promising material to increase plant growth and yield in the agriculture field. This review paper highlights the recent advances of CQD application in plant growth and photosynthesis rate at different concentrations, with a focus on CQD uptake and translocation, as well as electron transfer mechanism. The toxicity and biocompatibility studies of CQD, as well as industrial scale applications of CQD for agriculture are discussed. Finally, the current challenges of the present and future perspectives in this agriculture research are presented.

Mechanistic Insights into the Biodegradation of Carbon Dots by Fungal Laccase

While carbon dots (CDs) have the potential to support the agricultural revolution, it remains obscure about their environmental fate and bioavailability by plants. Fungal laccase-mediated biotransformation of carbon nanomaterials has received little attention despite its known capacity to eliminate recalcitrant contaminants. Herein, we presented the initial investigation into the transformation of CDs by fungal laccase. The degradation rates of CDs were determined to be first-order in both substrate and enzyme. Computational docking studies showed that CDs preferentially bonded to the pocket of laccase on the basal plane rather than the edge through hydrogen bonds and hydrophobic interactions. Electrospray ionization-Fourier transform-ion cyclotron resonance mass spectrometry (ESI-FT-ICR MS) and other characterizations revealed that the phenolic/amino lignins and tannins portions in CDs are susceptible to laccase transformation, resulting in graphitic structure damage and smaller-sized fragments. By using the 13C stable isotope labeling technique, we quantified the uptake and translocation of 13C-CDs by mung bean plants. 13C-CDs (10 mg L-1) accumulated in the root, stem, and leaf were estimated to be 291, 239, and 152 μg g-1 at day 5. We also evidenced that laccase treatment alters the particle size and surface chemistry of CDs, which could facilitate the uptake of CDs by plants and reduce their nanotoxicity to plants.

Fe-Mn nanocomposites doped graphene quantum dots alleviate salt stress of Triticum aestivum through osmolyte accumulation and antioxidant defense

An investigation was carried out to evaluate the effect of graphene quantum dots (GQD) and its nanocomposites on germination, growth, biochemical, histological, and major ROS detoxifying antioxidant enzyme activities involved in salinity stress tolerance of wheat. Seedlings were grown on nutrient-free sand and treatment solutions were applied through solid matrix priming and by foliar spray. Control seedlings under salinity stress exhibited a reduction in photosynthetic pigment, sugar content, growth, increased electrolyte leakage, and lipid peroxidation, whereas iron-manganese nanocomposites doped GQD (FM_GQD) treated seedlings were well adapted and performed better compared to control. Enzymatic antioxidants like catalase, peroxidase, glutathione reductase and NADPH oxidase were noted to increase by 40.5, 103.2, 130.19, and 141.23% respectively by application of FM_GQD. Histological evidence confirmed a lower extent of lipid peroxidation and safeguarding the plasma membrane integrity through osmolyte accumulation and redox homeostasis. All of these interactive phenomena lead to an increment in wheat seedling growth by 28.06% through FM_GQD application. These findings highlight that micronutrient like iron, manganese doped GQD can be a promising nano-fertilizer for plant growth and this article will serve as a reference as it is the very first report regarding the ameliorative role of GQD in salt stress mitigation.

Nitrogen-doped carbon dots enhanced seedling growth and salt tolerance with distinct requirements of excitation light

Numerous nanomaterials with optical properties have demonstrated excellent capacities to enhance plant growth and stress tolerance. However, the corresponding mechanisms have only been partially characterized, especially the excitation-light dependencies of different actions. Here, nitrogen-doped carbon dots (N-CDs) were developed to explore the excitation-light dependence in N-CD-induced growth enhancement and salt tolerance. Compared to the control, N-CDs induced significant enhancements in Arabidopsis thaliana growth under excitation light, including fresh/dry weight of shoot (21.07% and 16.87%), chlorophyll content (9.17%), soluble sugar content (23.41%), leaf area (28.68%), total root length (34.07%) and root tip number (46.69%). In the absence of excitation light, N-CD-treated seedlings exhibited little differences in these parameters, except the enhancements in root length (24.51%) and root tip number (10.24%). On the other hand, N-CD-treatment could improve seedling salt tolerance with or without excitation light. Under salt stress (150 mM NaCl), in the presence of excitation light, the N-CDs treatment significantly increased shoot/root fresh weight and chlorophyll content by 43.29%, 50.66% and 22.59%, and reduced malondialdehyde (MDA) content and relative conductivity by 17.59% and 32.58% compared to the control group. In the absence of excitation light, significant enhancements in shoot/root fresh weight (34.22%, 32.60%) and chlorophyll content (10.45%), and obvious decreases in MDA content (28.84%) and relative conductivity (16.13%) were also found. These results indicated that N-CDs only induced growth enhancement under excitation light, but they improved salt tolerance with and without excitation light, suggesting that the two effects occurred via distinct signaling pathways. This study revealed the excitation-light dependencies of nanomaterial-involved agriculture applications, providing insight into designing more efficient nanomaterials in the future.

Putrescine-functionalized carbon quantum dot (put-CQD) nanoparticle: A promising stress-protecting agent against cadmium stress in grapevine (Vitis vinifera cv. Sultana)

Due to their sessile nature, plant cannot escape from stress factors in their growing environment, in either biotic or abiotic nature. Amid the abiotic stress factors; high levels of soil cadmium (Cd) impose heavy metal stress on plants, resulting in critical injuries and reduced agronomic performance. In order to buffer the adverse effects of Cd stress, novel nanoparticles (NP) have been applied and notable improvements have been reported. According to the literature, the protective roles of polyamines (e.g., Putrescine; Put) and carbon quantum dots (CQD) have been reported with respect to the plant productivity under either stress or non-stress conditions. Those reports led us to hypothesize that the conjugation of Put and CQD (Put-CQD NPs) might lead to further augmented performance of plants under stress and non-stress conditions. In this regard, we successfully synthesized a novel nanomaterial Put-CQD NPs. In this respect, Put (50 mg L^-1), CQD (50 mg L^-1) and Put-CQD NPs (25 and 50 mg L^-1) were sprayed in 'Sultana' grapevines under Cd stress (10 mg kg^-1). As expected, upon stress, Cd content in leaf and root tissues increased by 103.40% and 65.15%, respectively (p < 0.05). The high uptake and accumulation of Cd in plant tissues were manifested in significant alterations of physiological and biochemical attributes of the plant. Concerning stress markers, Cd stress caused increases in content of induced MDA, H₂O₂, and proline as well as electrolyte leakage rate. As expected, Cd stress caused critical reductions in fresh and dry leaf weight by 21.31% and 42.34%, respectively (p < 0.05). On the other hand, both Put-CQD NPs increased fresh and dry leaf weigh up to approximately 30%. The Cd-mediated disturbances in photosynthetic pigments and chlorophyll fluorescence were buffered with Put-CQD NPs. Of the defence system, enzymatic (SOD, APX, GP) as well as anthocyanin and phenolics were induced by both Cd stress and Put-CQD NPs (p < 0.05). On the other hand, Cd stress reduced content of polyamines (putrescine (Put), spermine (Spm) and spermidine (Spd) by 39.28%, 53.36%, and 39.26%, respectively (p < 0.05). However, the reduction levels were buffered by the treatments. Considering the effectiveness of both NP concentrations, the lower dose (25 mg L^-1) could be considered as an optimal concentration. To our knowledge, this is the first report of its kind as a potential agent to reduce the adverse effects of Cd stress in grapevines.

Recent Progress on Nanocarriers for Topical-Mediated RNAi Strategies for Crop Protection—A Review

To fulfil the growing needs of the global population, sustainability in food production must be ensured. Insect pests and pathogens are primarily responsible for one-third of food losses and harmful synthetic pesticides have been applied to protect crops from these pests and other pathogens such as viruses and fungi. An alternative pathogen control mechanism that is more “friendly” to the environment can be developed by externally applying double-stranded RNAs (dsRNAs) to suppress gene expression. However, the use of dsRNA sprays in open fields is complicated with respect to variable efficiencies in the dsRNA delivery, and the stability of the dsRNA on and in the plants, and because the mechanisms of gene silencing may differ between plants and between different pathogen targets. Thus, nanocarrier delivery systems have been especially used with the goal of improving the efficacy of dsRNAs. Here, we highlight recent developments in nanoparticle-mediated nanocarriers to deliver dsRNA, including layered double hydroxide, carbon dots, carbon nanotubes, gold nanoparticles, chitosan nanoparticles, silica nanoparticles, liposomes, and cell-penetrating peptides, by review of the literature and patent landscape. The effects of nanoparticle size and surface modification on the dsRNA uptake efficiency in plants are also discussed. Finally, we emphasize the overall limitation of dsRNA sprays, the risks associated, and the potential safety concerns for spraying dsRNAs on crops.

Effects of plastic-derived carbon dots on germination and growth of pea (Pisum sativum) via seed nano-priming

Seed nano-priming is a promising technology employed in the agronomic field to promote seed germination and plant growth. However, the effects of carbon dots (CDs) on plant development via seed nano-priming remain unclear. In the present study, CDs synthesized from non-biodegradable plastic wastes were adopted as a nano-priming agent for pea (Pisum sativum) seed treatment. The results demonstrated positive effects of seed priming at all CD concentrations (0.25-2 mg/mL), including accelerated seed germination rate, increased shoot and root elongation, biomass accumulation, and root moisture level compared to the control groups. Surface erosion of seed coat was observed after CD priming, which effectively promoted seed imbibition capability. CD penetration, internalization, and translocation were confirmed using transmission electron microscopy. Furthermore, the CD-plant interaction significantly enhanced seed antioxidant enzyme activity, as well as augmented root vigor, chlorophyll content, and carbohydrate content. These findings exhibit great potential of waste-derived CDs as nano-priming agents for seed germination and seedling development in a cost-effective and sustainable manner.

The use and detection of quantum dots as nanotracers in environmental fate studies of engineered nanoparticles

Investigations of the behavior and effects of engineered nanoparticles (ENPs) on human health and the environment need detailed knowledge of their fate and transport in environmental compartments. Such studies are highly challenging due to low environmental concentrations, varying size distribution of the particles and the interference with the natural background. A strategy to overcome these limits is to use mimics of ENPs with unique detectable properties that match the properties of the ENPs as nanotracers. A special class of ENPs that can be tracked are quantum dots (QDs). QDs are composed of different metals, metalloids, or more recently also carbon (e.g., graphene), that result in unique optical properties. This allows the tracking of such particles by fluorescence microscopic and photometric techniques. Many types of QDs consist of heavy elements, allowing to track and visualize these particles also by electron microscopy and to quantitate the particles indirectly based on these elements. QDs can also be surface modified in various ways which enable them to be used as a label or as traceable mimics for ENPs. This review reflects a broad range of methods to synthesize and modify QDs based on metals, metalloids, and graphene for studying the environmental fate of nanoparticles and discusses and compares analytical methods that can be used for tracking and quantifying QDs. In addition, we review applications of QDs as ENP mimics in environmental studies of surface waters, soils, microorganisms, and plants with respect to the applied analytical techniques.

Biogenic Synthesis of Fluorescent Carbon Dots (CDs) and Their Application in Bioimaging of Agricultural Crops

Fluorescent nanoparticles have a transformative potential for advanced sensors and devices for point-of-need diagnostics and bioimaging, bypassing the technical burden of meeting the assay performance requirements. Carbon dots (CDs) are rapidly emerging carbon-based nanomaterials. Regardless of their fate, they will find increasing applications. In this study, a simple approach for synthesizing CDs from fruit peels was developed. The CDs were fabricated from Annona squamosa (L.) peels using a carbonization technique through microwave-assisted hydrothermal digestion at temperatures around 200 °C. Synthesized CDs were detected using a UV transilluminator for the preliminary confirmation of the presence of fluorescence. UV-Vis spectrophotometry (absorbance at 505 nm) analysis, zeta potential measurement (-20.8 mV), nanoparticles tracking analysis (NTA) (average size: 15.4 nm and mode size: 9.26 nm), photoluminescence, and Fourier transform infrared (FT-IR) analysis were used to identify the capping functional groups on the CDs. The total quantum yield exhibited was 8.93%, and the field emission scanning electron microscopy (FESEM) showed the size range up to 40 nm. The germinating mung bean (Vigna radiata (L.)) seeds were incubated with biogenically synthesized CDs to check the absorption of CDs by them. The fluorescence was observed under a UV-transilluminator in the growing parts of seeds, indicating the absorption of CDs during the germination, development, and growth. These fluorescent CDs could be used as a bioimaging agent. This novel method of synthesizing CDs was found to be eco-friendly, rapid, and cost-effective.

Heterogeneous catalytic activation of peroxydisulfate toward degradation of pharmaceuticals diclofenac and ibuprofen using scrap printed circuit board

Pharmaceutical residues have been identified as a priority contaminant due to their toxicity to organisms and the ecosystem as representative refractory organic compounds in water. Therefore, using efficient treatment methods to remove them from wastewater has become a crucial topic of research. Advanced oxidation processes (AOPs) based on the sulfate radical have gained increased attention in recent years due to their superior performance and adaptability in the decomposition of refractory organic contaminants. In this work, scrap printed circuit boards (PCBs) were used to prepare a low-cost and efficient heterogeneous peroxydisulfate (PDS) catalytic activator via thermal treatment with an air combustion non-carbonized catalyst (NCC) and pyrolysis with a nitrogen carbonized catalyst (CC) for the removal of diclofenac (DCF) and ibuprofen (IBF) from water at circumneutral pH. The synthesized catalysts were characterized by several analytical techniques. The effects of various experimental parameters on the removal efficiency were examined. Under optimum conditions, the degradation efficiency reached 76% and 71% with NCC and 63% and 57.5% with CC within 60 min for DCF and IBP, respectively. The mineralization efficiency as measured by TOC removal reached up to 65% after 60 min treatment. The degradation kinetics for both catalysts followed the pseudo-first-order model. Results from quenching tests showed that the reactive oxidizing species (ROS), including ¹O₂ > SO₄˙^- > ˙OH, were generated mainly in the NCC/PDS and CC/PDS systems. Overall, the prepared catalysts were found to be effective and reusable for PDS activation for the removal of pharmaceutical pollutants from water. This study provided a promising, robust and efficient heterogeneous catalytic PDS activation based on the strategy of "waste-treats-waste" for the removal of pharmaceutical pollutants from water.

Preparation of Berberine@carbon Dots Nano-Formulation: Synthesis, Characterization and Herbicidal Activity against Echinochloa crus-galli and Amaranthus retroflexus Two Common Species of Weed

Berberine (Ber) is easy to synthesize and has a variety of biological and pharmacological activities. At present, the existing studies on berberine have focused predominantly on its antibacterial activity; its herbicidal activity is rarely reported. In addition, there are a number of preparations of berberine, which are not enough to solve its shortcomings of low solubility and biological activity and the difficult storage of berberine. Here, berberine was combined with carbon dots to obtain carbon dots-berberine (CDs-Ber) nano formulation. The fluorescence quenching results showed that the CDs-Ber nano drug delivery system was successfully constructed, and the fluorescence quenching mechanism of the two was static quenching. The bioassay results showed that CDs had no adverse effects on the growth of barnyard grass (Echinochloa crus-galli) and redroot pigweed (Amaranthus retroflexus), and had high biocompatibility. Berberine and CDs-Ber predominantly affected the root growth of barnyard grass and redroot pigweed and could enhance the growth inhibition effect on weeds, to some extent. The results of the protective enzyme system showed that both berberine and CDs-Ber could increase the activities of Superoxide dismutase (SOD), Peroxidase (POD), and Catalase (CAT) in barnyard grass, and CDs-Ber had a stronger stress effect on barnyard grass than berberine. The determination of the number of bacterial communities in the soil after the berberine and CDs-Ber treatments showed that there was no significant difference in the effects of the two, indicating that CDs-Ber would not have more negative impacts on the environment. The CDs-Ber nano formulation improved the biological activity of berberine, enhanced the herbicidal effect, and was relatively safe for soil colonies.

Affinity of carbon quantum dots anchored within metal organic framework matrix as enhancer of plant nourishment

Nano-fertilizers were ascribed to be significantly advantageous with minimizing the negative effects of requiring excessive contents in the soil and reducing the number of times for fertilization. Herein, the superior affinity of carbon quantum dots (CQDs) anchored within metal organic framework (Cu-BTC) matrix was investigated for the first time as a fertilizer for sunflower. CQDs were nucleated from alkali-hydrolyzed carboxymethyl cellulose (CMC) via the hydrothermal technique. The synthesized CQDs (6.8 ± 3.7 nm) were anchored within Cu-BTC (crystalline rod-like structure) matrix, to produce CQDs@Cu-BTC composite. The obtained CQDs and CQDs@Cu-BTC were applied as nutrients for the sunflower plant. The chlorophyll a and carotenoids contents were 0.465 & 0.497 and 0.350 & 0.364 mg/g after treatment with CQDs & CQDs@Cu-BTC, respectively. The shoot length of sunflower sample was increased after feeding with CQDs and CQDs@Cu-BTC to be 38.7 and 46.5 cm, respectively. The obtained results confirmed that, the synthesized CQDs@Cu-BTC showed superiority as nutrient material via enhancing the growth and physiological properties of sunflower and consequently could be used as fertilizer for plants instead of the commercial nutrient.

Inhibition of UV-B stress in lettuce through enzyme-like Scutellaria baicalensis carbon dots

Oxidative stress in plants caused by UV-B stress has always been a great challenge to the yield of agricultural products. Carbon dots (CDs) with enzyme-like activity have been developed, and inhibiting oxidative stress in animals has been achieved, but little is known about abiotic stress resistance in plants, especially UV-B stress. In this study, CDs were synthesized from Scutellaria baicalensis via a hydrothermal method. The ability of CDs to scavenge reactive oxygen species (ROS) in vivo and in vitro and to enhance antioxidant resistance in vivo was evaluated. The results show that CDs promoted the nutrient assimilation ability of lettuce seedlings and protected the plants from UV-B stress by increasing the activities of superoxide dismutase (SOD), peroxidase (POD), catalase (CAT), glutathione reductase (GR), and ascorbate peroxidase (APX). Moreover, the antioxidant metabolism of plants can be activated by CDs and the expression levels of aquaporin (AQP) genes PIP1 and PIP2 are also up-regulated. These results facilitate the design and fabrication of CDs to meet the challenge of abiotic stress in food production.

Sugar-terminated carbon-nanodots stimulate osmolyte accumulation and ROS detoxification for the alleviation of salinity stress in Vigna radiata

In recent times, nanotechnology has emerged as an efficient tool to manage the adverse effect of environmental stresses on plants. In this connection, carbon-nanodots (CNDs) have been reported to ameliorate the negative impacts of salinity stress. Further, surface modification of CNDs is believed to augment their stress-alleviating potential, however, very little has been known about the potential of surface-functionalized CNDs. In this purview, two sugar (trehalose and glucose) terminated CNDs (CNPT and CNPG) have been synthesized and assessed for their stress-alleviating effects on Vigna radiata (a salt-sensitive legume) seedlings subjected to different concentrations of NaCl (0, 50, and 100 mM). The synthesized CNDs (CNPT and CNPG) exhibited a hydrodynamic size of 20-40 nm and zeta potential of up to - 22 mV with a 5-10 nm core. These water-soluble nanomaterials exhibited characteristic fluorescence emission properties viz. orange and greenish-yellow for CNPT and CNPG respectively. The successful functionalization of the sugar molecules on the CND cores was further confirmed using FTIR, XRD, and AFM. The results indicated that the application of both the CNDs improved seed germination, growth, pigment content, ionic and osmotic balance, and most importantly, the antioxidant defense which decreased ROS accumulation. At the same time, CNPT and CNPG exhibited no toxicity in the Allium cepa root tip bioassay. Therefore, it can be concluded that sugar-terminated CNDs improved the plant responses to salinity stress by facilitating sugar uptake to the aerial part of the seedlings.

Recent advances in green carbon dots (2015-2022): synthesis, metal ion sensing, and biological applications

Carbon dots (CDs) show extensive potential in various fields such as sensing, bioimaging, catalysis, medicine, optoelectronics, and drug delivery due to their unique properties, that is, low cytotoxicity, cytocompatibility, water-solubility, multicolor wavelength tuned emission, photo-stability, easy modification, strong chemical inertness, etc. This review article especially focuses on the recent advancement (2015-2022) in the green synthesis of CDs, their application in metal ions sensing and microbial bioimaging, detection, and viability studies as well as their applications in pathogenic control and plant growth promotion.

Sustainable agronomic response of carbon quantum dots on Allium sativum: Translocation, physiological responses and alternations in chromosomal aberrations

The revolutionary growth in the usage of carbon quantum dots (CQDs) in different areas have ultimately directed their discharge in the environment and further augmented the exposure of agricultural crops to these released particles. Therefore, the aim of current study is to evaluate the uptake, translocation and phytotoxicity of blue emissive CQDs on Allium sativum plant. The genotoxicity and cytotoxicity assessment of CQDs towards Allium sativum roots was estimated as function of three different concentrations. Considering the role of CQDs in promoting seed germination at 50 ppm concentration, a greenhouse experiment was performed to evaluate their effect on plant growth. Systematic investigations have shown the translocation of CQDs and their physiological response in terms of increased shoot length wherein P-CQDs exhibited more accumulation into Allium sativum parts. Our investigations unfold the opportunity to utilize Aegle marmelos fruit derived CQDs as a growth regulator in variety of other food plants.

Potential of chitosan/carbon nanoparticles and chitosan/lignocellulose nanofiber composite as growth media for peatland paddy seeds

Indonesia has committed to restoring degraded peatlands by revegetating them with paddy plants using paludiculture systems. Nanofertilizers derived from chitosan and oil palm biomass can be used to enhance paddy growth. This study analyzed the potential growth media of chitosan nanocomposite films for paddy seeds grown in tropical peatland. Chitosan nanocomposites were synthesized by reinforcing chitosan with activated carbon nanoparticles (ACNPs), nonactivated carbon nanoparticles (n-ACNPs), and lignocellulose nanofibers (LCNFs). All carbon nanoparticles were reversibly aggregated, whereas LCNFs did not have a tendency to aggregate but were entangled. The highest specific surface area and pore volume are on EFB ACNPs, followed by OPT LCNFs and EFB n-ACNPs. Both nanocomposites' tensile strength and elastic modulus value were reduced with an average of 45.77% and 34.00%, respectively, because of the lack of nano- and micro-aggregates formation, good dispersion, and incompatibility. In a germination test, chitosan nanocomposites provided the best growth patterns for the Dendang paddy variety, whereas, in a greenhouse test, the nanocomposites had the best growth patterns for the Indragiri paddy variety. Chitosan/empty fruit bunch ACNP nanocomposites grown in a germinator had the highest growth normality (100.00%), highest maximum growth potential (100.00%), and highest height average (11.27 cm). In the greenhouse test, chitosan/oil palm trunk n-ACNPs achieved the highest growth natality (16.44%) and growth rate (65.74%). All chitosan nanocomposites had a synergetic biofertilizing effect on fungi and mycorrhiza. Chitosan nanocomposites can be used as a growth regulator for peatland paddy varieties and can accelerate peatland restoration in tropical areas.

Green-Routed Carbon Dot-Adorned Silver Nanoparticles for the Catalytic Degradation of Organic Dyes

Herein, a simple, cost-effective, and in-situ environmentally friendly approach was adopted to synthesize carbon dot-adorned silver nanoparticles (CDs@AgNPs) from yellow myrobalan (Terminalia chebula) fruit using a hydrothermal treatment without any additional reducing and or stabilizing agents. The as-synthesized CDs@AgNP composite was systematically characterized using multiple analytical techniques: FESEM, TEM, XRD, Raman, ATR-FTIR, XPS, and UV-vis spectroscopy. All the results of the characterization techniques strongly support the idea that the CDs were successfully made to adorn the AgNPs. This effectively synthesized CDs@AgNP composite was applied as a catalyst for the degradation of organic dyes, including methylene blue (MB) and methyl orange (MO). The degradation results revealed that CDs@AgNPs exhibit a superior catalytic activity in the degradation of MB and MO in the presence of NaBH4 (SB) under ambient temperatures. In total, 99.5 and 99.0% rates of degradation of MB and MO were observed using CDs@AgNP composite with SB, respectively. A plausible mechanism for the reductive degradation of MB and MO is discussed in detail. Moreover, the CDs@AgNP composite has great potential for wastewater treatment applications.

Carbon Dots Improve Nitrogen Bioavailability to Promote the Growth and Nutritional Quality of Soybeans under Drought Stress

The inefficient utilization of nitrogen (N) in soil and drought stress seriously threatens agricultural and food production. Herein, soil application of carbon dots (CDs, 5 mg kg^-1) promoted the growth and nutritional quality of soybeans by improving N bioavailability, which was beneficial to alleviate the economic losses caused by drought stress. Soil application of CDs enhanced the N-fixing ability of nodules, regulated rhizosphere processes, and ultimately enhanced N and water uptake in soybeans under drought stress. Compared to control (drought stress), the application of CDs under drought stress enhanced soybean nitrogenase activity by 8.6% and increased N content in soybean shoots and roots by 18.5% and 14.8%, respectively. CDs in soil promoted the secretion of root exudates (e.g., organic acids, fatty acids, and polyketides) and regulated beneficial microbial communities (e.g., Proteobacteria, Acidobacteria, Gemmatimonadetes, and Actinobacteria), thus enhancing the N release from soil. Besides, compared to control, the expression of GmNRT, GmAMT, GmLB, and GmAQP genes in roots were upregulated by 1.2-, 1.8-, 2.7-, and 2.3-fold respectively, implying enhanced N transport and water uptake. Furthermore, the proteins, fatty acids, and amino acids in soybean grains were improved by 3.4%, 6.9%, and 17.3%, respectively, as a result of improved N bioavailability. Therefore, CD-enabled agriculture is promising for improving the drought tolerance and quality of soybeans, which is of significance for food security in facing the crisis of global climate change.

Altering natural photosynthesis through quantum dots: effect of quantum dots on viability, light harvesting capacity and growth of photosynthetic organisms

Quantum dots are versatile fluorescent semiconductor nanocrystals with unique photophysical properties. They have been used in various research fields of biotechnology effectively for almost three decades including cell imaging, protein tracking, energy transfer, etc. With their great potential as energy donors or acceptors, quantum dots have also been used in many studies about altering growth rate and photosynthetic activity of photosynthetic organisms by manipulating their light harvesting capacity. In this review, effect of quantum dots on growth rate of photosynthetic organisms and light harvesting capacity of photosynthetic organisms were discussed in details together with toxic effects of cadmium-based and carbon-based quantum dots on photosynthetic organisms. In short, as one of the promising materials of nanotechnology, quantum dots have become one of the essential research topics in photosynthesis research area and will help researchers to manipulate natural photosynthesis in future.

New analytical strategies amplified with carbon-based nanomaterial for sensing food pollutants

The most significant topic currently under the moonlight is Nanobiotechnology and engineered nanomaterials. The novel characteristics displayed by engineered Nanomaterials, especially carbon-based nanomaterials, have spurred interest in its potential application in the food industry. It has provided opportunities for finding solutions to the long-standing challenges in the food industry to assess food safety, maintain food quality, extend the shelf life of produce, and efficiently deliver nutrients. Nanomaterials can be incorporated in food sensors facilitating efficient monitoring of crop maturity and detecting biological and chemical contaminants. When integrated into food packages, nanomaterials could aid in assessing the freshness and improving the quality of packaged foods. In addition, more efficient delivery of nutrients could be possible in foods fortified using nano compounds. The initial section of this review gives an overview of the broad application of nanotechnology in the food industry and carbon-based nanomaterials. The latter part focuses on nanotechnology in biosensors for food safety and quality monitoring.

Plant Bioelectronics and Biohybrids: The Growing Contribution of Organic Electronic and Carbon-Based Materials

Life in our planet is highly dependent on plants as they are the primary source of food, regulators of the atmosphere, and providers of a variety of materials. In this work, we review the progress on bioelectronic devices for plants and biohybrid systems based on plants, therefore discussing advancements that view plants either from a biological or a technological perspective, respectively. We give an overview on wearable and implantable bioelectronic devices for monitoring and modulating plant physiology that can be used as tools in basic plant science or find application in agriculture. Furthermore, we discuss plant-wearable devices for monitoring a plant's microenvironment that will enable optimization of growth conditions. The review then covers plant biohybrid systems where plants are an integral part of devices or are converted to devices upon functionalization with smart materials, including self-organized electronics, plant nanobionics, and energy applications. The review focuses on advancements based on organic electronic and carbon-based materials and discusses opportunities, challenges, as well as future steps.

Nanotechnology Strategies for Plant Genetic Engineering

Plant genetic engineering is essential for improving crop yield, quality, and resistance to abiotic/biotic stresses for sustainable agriculture. Agrobacterium-, biolistic bombardment-, electroporation-, and poly(ethylene glycol) (PEG)-mediated genetic-transformation systems are extensively used in plant genetic engineering. However, these systems have limitations, including species dependency, destruction of plant tissues, low transformation efficiency, and high cost. Recently, nanotechnology-based gene-delivery methods have been developed for plant genetic transformation. This nanostrategy shows excellent transformation efficiency, good biocompatibility, adequate protection of exogenous nucleic acids, and the potential for plant regeneration. However, the nanomaterial-mediated gene-delivery system in plants is still in its infancy, and there are many challenges for its broad applications. Herein, the conventional genetic transformation techniques used in plants are briefly discussed. After that, the progress in the development of nanomaterial-based gene-delivery systems is considered. CRISPR-Cas-mediated genome editing and its combined applications with plant nanotechnology are also discussed. The conceptual innovations, methods, and practical applications of nanomaterial-mediated genetic transformation summarized herein will be beneficial for promoting plant genetic engineering in modern agriculture.

Carbon dots up-regulate heme oxygenase-1 expression towards acute lung injury therapy

Pneumonia is a kind of inflammation, which can cause high morbidity and mortality, and the treatment of pneumonia has received widespread attention. Heme oxygenase-1 (HMOX1) is a cell protective enzyme and can generate an anti-inflammatory response. Here, we demonstrate that degradable carbon dots (from L-ascorbic acid, CDs-1) can up-regulate the expression of HMOX1 in animal cells and tissues, which has a therapeutic effect on LPS-induced acute lung injury in mice. It was confirmed from in vitro experiments that CDs-1 could significantly up-regulate the expression of mRNA and the protein of HMOX1, which can increase the expression of HMOX1 by 5 times in a short time, decreasing the reactive oxygen species level in a cellular inflammation model induced by LPS. Furthermore, a series of in vivo comparative experiments show that CDs-1 could effectively treat acute lung injury and improve the survival rate of mice to 80%. Our work provides a practical way for the treatment of acute inflammation and the promising application of CDs in anti-inflammation.

Multifunctional room-temperature phosphorescent carbon dots for relative humidity determination and information encryption

The relative humidity (RH) determination is crucial in many fields. Based on the phosphorescent properties of room-temperature phosphorescent (RTP) carbon dots, the RTP carbon dots as a probe are expected to be used to rapidly detect relative humidity. In this study, matrix-free room-temperature phosphorescent N-doped carbon dots (N-CDs) were successfully prepared from urea, succinic acid, and acrylamide using a hydrothermal method. The as-synthesized N-CDs had good biocompatibility and water solubility. The N-CDs emitted blue fluorescence and green phosphorescence. Moreover, the N-CD powder exhibited stable phosphorescence with a phosphorescence lifetime of 158 ms (afterglow time to the naked eye for ~7 s). Because H₂O molecules affected the afterglow time, the as-prepared N-CD test paper for the first time could be applied as a probe to monitor RH, the afterglow time of the N-CD test paper is linearly related to the RH (y = -0.0729x+7.042, R² = 0.998) and the RH detection range is 0%-85%. And the results were consistent with those obtained using a hygrometer. In addition, the N-CD solution could also be used as an encryption ink in the advanced information security field.

Implication of Wood-Derived Hierarchical Carbon Nanotubes for Micronutrient Delivery and Crop Biofortification

A similarity of metal alloy encapsulation with the micronutrient loading in carbon nanoarchitecture can be fueled by exploring carbon nanocarriers to load micronutrient and controlled delivery for crop biofortification. A wood-derived nanoarchitecture model contains a few-graphene-layer that holds infiltrated alloy nanoparticles. Such wood-driven carbonized framework materials with legions of open porous architectures and minimized-tortuosity units further decorated carbon nanotubes (CNTs), which originate from heat treatment to carbonized wood samples. These wood-derived samples can alleviate micronutrient nanoparticle permeation and delivery to the soil. A rapid heat shock treatment can help in distributing N-C-NiFe metal alloy encapsulation in carbon frameworks uniformly in that case; higher heating and rapid extinction of heat shock have led to formation of good dispersion of nanoparticles. The wood-carbon framework decorated with metal alloys displays promising electrocatalytic features and cyclic stability for hydrogen evolution. Envisaged from this strategy, we obtain enough evidence to form an opinion that a singular heat shock process can even lead to a strategy of faster growth of a wood-carbon network with well-dispersed micronutrient metal salts in porous matrices for high-efficiency delivery to the soil. Having envisaged the formation of ultrafine nanoparticles with a good dispersion profile in the case of transition metals and alloy encapsulation in the carbon network due to the rapid heating and quenching rates, we anticipate that the loading of micronutrients in the wood-derived nanoarchitecture of carbonized wood derived carbon nanotube (CW-CNT), which can offer an application in seed germination and enhance growth rates of crops. The experience of controlled experiments on germination of tomato seeds on a medium containing CW-CNT that can diffuse the seed coat with the promotion of water uptake inside seeds for enhanced germination and growth of tomato seedlings can be further extended to cereal crops.

Enhanced tolerance to salinity stress in grapevine plants through application of carbon quantum dots functionalized by proline

Salinity has destructive impacts in plant production; therefore, application of new approaches such as nanotechnology and plant priming is attracting increasing attention as an innovative means to ameliorate salt stress effects. Considering the unique properties and recorded beneficial influence of carbon quantum dots (CQDs) and proline in plant growth and physiological parameters when applied individually, their conjugation in the form of carbon quantum dot nanoparticles functionalized by proline (Pro-CQDs NPs) could lead to synergistic effects. Accordingly, an experiment was conducted to evaluate the impact of this advanced nanomaterial (Pro-CQDs NPs) as a chemical priming agent, in grapevine plants cv. 'Rasha'. For this purpose, proline, CQDs, and Pro-CQDs NPs at three concentrations (0, 50, and 100 mg L^-1) were applied exogenously 48 h prior to salinity stress (0 and 100 mM NaCl) that was imposed for a month. Three days after imposing salt stress, an array of biochemical measurements was recorded, while agronomic and some physiological parameters were noted at the end of the stress period. Results revealed that proline treatment at both concentrations, as well as CQDs and Pro-CQDs NPs at low concentration, positively affected grapevine plants under both non-stress and stress conditions. Specifically, the application of proline at 100 mg L^-1 and Pro-CQDs NPs at 50 mg L^-1 resulted in optimal performance identifying 50 mg L^-1 Pro-CQDs NPs as the optimal treatment. Proline treatment at 100 mg L^-1 increased leaf fresh weight (FW) and dry weight (DW); chl a, b, and proline content; SOD activity under both non-stress and stress conditions; Y (II) under salinity and carotenoid content; and CAT activity under control conditions. Pro-CQDs NP treatment at 50 mg L^-1 enhanced total phenol, anthocyanin, and ^Fv/_Fo, as well as APX and GP activities under both conditions, while increasing carotenoid, Y (II), ^Fv/_Fo, and CAT activity under salinity. Furthermore, it decreased MDA and H₂O₂ contents at both conditions and EL and Y (NO) under salt stress. Overall, conjugation of CQDs with proline at 50 mg L^-1 resulted in further improving the protective effect of proline application at 100 mg L^-1. Therefore, functionalization of NPs with chemical priming agents appears to be an effective means of optimizing plant-priming approaches towards efficient amelioration of abiotic stress-related damage in plants.

Fate, cytotoxicity and cellular metabolomic impact of ingested nanoscale carbon dots using simulated digestion and a triculture small intestinal epithelial model

Carbon dots (CDs) are a promising material currently being explored in many industrial applications in the biomedical and agri-food areas; however, studies supporting the environmental health risk assessment of CDs are needed. This study focuses on various CD forms including iron (FeCD) and copper (CuCD) doped CDs synthesized using hydrothermal method, their fate in gastrointestinal tract, and their cytotoxicity and potential changes to cellular metabolome in a triculture small intestinal epithelial model. Physicochemical characterization revealed that 75% of Fe in FeCD and 95% of Cu in CuCD were dissolved during digestion. No significant toxic effects were observed for pristine CDs and FeCDs. However, CuCD induced significant dose-dependent toxic effects including decreases in TEER and cell viability, increases in cytotoxicity and ROS production, and alterations in important metabolites, including D-glucose, L-cysteine, uridine, citric acid and multiple fatty acids. These results support the current understanding that pristine CDs are relatively non-toxic and the cytotoxicity is dependent on the doping molecules.

Fluorescent nanoparticles as tools in ecology and physiology

Fluorescent nanoparticles (FNPs) have been widely used in chemistry and medicine for decades, but their employment in biology is relatively recent. Past reviews on FNPs have focused on chemical, physical or medical uses, making the extrapolation to biological applications difficult. In biology, FNPs have largely been used for biosensing and molecular tracking. However, concerns over toxicity in early types of FNPs, such as cadmium-containing quantum dots (QDs), may have prevented wide adoption. Recent developments, especially in non-Cd-containing FNPs, have alleviated toxicity problems, facilitating the use of FNPs for addressing ecological, physiological and molecule-level processes in biological research. Standardised protocols from synthesis to application and interdisciplinary approaches are critical for establishing FNPs in the biologists' tool kit. Here, we present an introduction to FNPs, summarise their use in biological applications, and discuss technical issues such as data reliability and biocompatibility. We assess whether biological research can benefit from FNPs and suggest ways in which FNPs can be applied to answer questions in biology. We conclude that FNPs have a great potential for studying various biological processes, especially tracking, sensing and imaging in physiology and ecology.

Photosynthesis Enhancement in Maize via Nontoxic Orange Carbon Dots

The sustained increase in leaf photosynthesis may increase crop yield. Due to many limitations, plants use much less photosynthetic capacity than is theoretically possible. Plant nanobionics investigates nanoparticle application in living plants, which improves certain plant functions. We synthesized and tested nontoxic orange carbon dots (o-CDs) for the photosynthetic efficiency increase in maize (Zea mays L.). We applied o-CDs foliarly or by adding to the growth solution. The photosynthetic parameters and content of photosynthetic pigments were recorded. The total phenolic content (TPC) and total antioxidant activity (TAA) were measured to monitor the plant antioxidant response to o-CDs. The photosynthetic parameters' values were higher for foliar than for solution application. The 1 mg/L o-CDs applied foliarly and 5 mg/L in solution increased photosynthetic parameters in leaves. The o-CDs raised photosynthetic pigments. The TAA and TPC results indicate reduced antioxidant activity in the plant organs more exposed to o-CDs, depending on the way of application.

Noval Dual-Emission Fluorescence Carbon Dots as a Ratiometric Probe for Cu2+ and ClO- Detection

The use of carbon dots (CDs) with dual emission based on ratiometric fluorescence has been attracting attention in recent times for more accurate ion detection since they help avoid interference from background noise, probe concentration, and complexity. Herein, novel dual-emission nitrogen-doped CDs (NCDs) were prepared by a simple method for Cu2+ and ClO- detection. The NCDs showed excellent anti-interference ability and selectivity for different emissions. In addition, a good linear relationship was observed between the fluorescence intensity (FI) of the NCD solutions in different emissions with Cu2+ (0-90 μM) and ClO- (0-75 μM). The limits of both Cu2+ detection and ClO- were very low, at 17.7 and 11.6 nM, respectively. The NCDs developed herein also showed a good recovery rate in water for Cu2+ and ClO- detection. Hence, they are expected to have a more extensive application prospect in real samples.

Multi-Wall Carbon Nanotubes Promote the Growth of Maize (Zea mays) by Regulating Carbon and Nitrogen Metabolism in Leaves

Previous studies have suggested that multiwalled carbon nanotubes (MWCNTs) promote plant growth; however, the mechanism is yet to be fully understood. In this study, the effects of MWCNTs (20, 100, and 500 mg/L) on the carbon (C) and nitrogen (N) metabolism in maize were studied to explore the molecular mechanism of the action of MWCNTs on plants. The results showed that 100 mg/L MWCNTs increased the shoot fresh and dry weight, root fresh weight, and seedling length while other doses showed no significant effects. Further studies showed that 100 mg/L MWCNTs increased the chlorophyll content, transpiration rate, stomatal conductance, and intercellular CO₂ concentration, by 50.6%, 60.8%, 47.2%, and 32.1%, respectively. Activities of key enzymes including sucrose synthase (SS), sucrose phosphate synthase (SPS) and phosphoenolpyruvate carboxylase (PEPC) that are involved in the carbon metabolism, and nitrate reductase (NR), glutamine synthetase (GS), and glutamate synthetase (GOGAT) that are involved in N metabolism, were all upregulated by 100 mg/L MWCNTs, which contributed to the increase of the accumulation of carbohydrates (sugar and starch), soluble protein, and N in plants. These findings suggest that MWCNTs can improve plant growth by regulating the key enzymes involved in C and N metabolism thereby enhancing the carbohydrate production and the use of N and improving plant growth. This study provides significant insights into the molecular mechanism of the positive effects of MWCNTs on plants and provide a basis for the agricultural application of MWCNTs.