1
|
Maroli G, Abarintos V, Piper A, Merkoçi A. The Cleanroom-Free, Cheap, and Rapid Fabrication of Nanoelectrodes with Low zM Limits of Detection. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2023; 19:e2302136. [PMID: 37635265 DOI: 10.1002/smll.202302136] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/13/2023] [Revised: 06/28/2023] [Indexed: 08/29/2023]
Abstract
Nanoscale electrodes have been a topic of intense research for many decades. Their enhanced sensitivities, born out of an improved signal-to-noise ratio as electrode dimensions decrease, make them ideal for the development of low-concentration analyte sensors. However, to date, nanoelectrode fabrication has typically required expensive equipment and exhaustive, time-consuming fabrication methods that have rendered them unsuitable for widespread use and commercialization. Herein, a method of nanoband electrode fabrication using low cost materials and equipment commonly found in research laboratories around the world is reported. The materials' cost to produce each nanoband is less than €0.01 and fabrication of a batch takes less than 1 h. The devices can be made of flexible plastics and their designs can be quickly and easily iterated. Facile methods of combining these nanobands into powerful devices, such as complete three-electrode systems, are also displayed. As a proof of concept, the electrodes are functionalized for the detection of a DNA sequence specific to SARS-CoV-2 and found to display single molecule sensitivity.
Collapse
Affiliation(s)
- Gabriel Maroli
- Catalan Institute of Nanoscience and Nanotechnology (ICN2), UAB Campus, Bellaterra, Barcelona, 08193, Spain
- UIDI-CONICET Universidad Tecnológica Nacional, Buenos Aires, C1041AAJ, Argentina
| | - Vernalyn Abarintos
- Catalan Institute of Nanoscience and Nanotechnology (ICN2), UAB Campus, Bellaterra, Barcelona, 08193, Spain
| | - Andrew Piper
- Catalan Institute of Nanoscience and Nanotechnology (ICN2), UAB Campus, Bellaterra, Barcelona, 08193, Spain
| | - Arben Merkoçi
- Catalan Institute of Nanoscience and Nanotechnology (ICN2), UAB Campus, Bellaterra, Barcelona, 08193, Spain
| |
Collapse
|
2
|
Cheng P, Wang D. Easily Repairable and High-Performance Carbon Nanostructure Absorber for Solar Photothermoelectric Conversion and Photothermal Water Evaporation. ACS APPLIED MATERIALS & INTERFACES 2023; 15:8761-8769. [PMID: 36744969 DOI: 10.1021/acsami.2c22077] [Citation(s) in RCA: 6] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/18/2023]
Abstract
Carbon materials are a category of broadband solar energy harvesting materials that can convert solar energy into heat under irradiation, which can be used for photothermal water evaporation and photothermoelectric power generation. However, destruction of the carbon nanostructure during usage will significantly decrease the light-trapping performance and, thus, limit their practical applications. In this article, an easily repairable carbon nanostructure absorber with full-solar-spectrum absorption and a hierarchically porous structure is prepared. The carbon absorber shows a superhigh light absorption of above 97% across the whole solar spectrum because of multiple scatterings within the carbon nanostructure and photon interaction with the carbon nanoparticles. The excellent light absorption performance directly leads to a good photothermal effect. As a consequence, the carbon absorber integrated with a thermoelectric module can obtain a large power (133.3 μW cm-2) output under 1 sun. In addition, the carbon absorber combined with the sponge can achieve a high photothermal water evaporation efficiency of 83.6% under 1 sun. Its high-efficiency solar-to-electricity and photothermal water evaporation capabilities demonstrate that the carbon absorber with superhigh absorption, simple fabrication, and facile repairability shows great potential for practical fresh water production and electric power generation.
Collapse
Affiliation(s)
- Pengfei Cheng
- Chair Materials for Electrical Engineering and Electronics, Institute of Materials Science and Engineering and Institute of Micro- and Nanotechnologies MacroNano, Technische Universität Ilmenau, Gustav-Kirchhoff-Straße 5, 98693Ilmenau, Germany
| | - Dong Wang
- Chair Materials for Electrical Engineering and Electronics, Institute of Materials Science and Engineering and Institute of Micro- and Nanotechnologies MacroNano, Technische Universität Ilmenau, Gustav-Kirchhoff-Straße 5, 98693Ilmenau, Germany
| |
Collapse
|
3
|
Lyu S, Zhang Y, Du G, Di C, Yao H, Fan Y, Duan J, Lei D. Double-sided plasmonic metasurface for simultaneous biomolecular separation and SERS detection. SPECTROCHIMICA ACTA. PART A, MOLECULAR AND BIOMOLECULAR SPECTROSCOPY 2023; 285:121801. [PMID: 36122462 DOI: 10.1016/j.saa.2022.121801] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/31/2022] [Revised: 08/26/2022] [Accepted: 08/27/2022] [Indexed: 06/15/2023]
Abstract
Porous membrane-based nanofiltration separation of small biomolecules is a widely used biotechnology for which size-based selectivity is a critical parameter of technological relevance. Efficient determination of size selectivity calls for an advanced detection method capable of performing sensitive, rapid, and on-membrane examination. Surface-enhanced Raman spectroscopy (SERS) is such a detection method that has been widely recognized as an ultrasensitive technique for trace-level detection with sensitivity down to the single-molecule level. In this work, we for the first time develop a double-sided hierarchical porous membrane-like plasmonic metasurface to realize high-selectivity bimolecular separation and simultaneous ultrasensitive SERS detection. This highly flexible device, consisting of subwavelength nanocone pairs surrounded by randomly orientated sub-5 nm nanogrooves, was prepared by combining customized "top-down" fabrication of conical nanopores in an ion-track registered polycarbonate membrane and self-assembly of nanogrooves on the membrane surface through physical vapor deposition. The unique tip-to-tip oriented conical nanopores in the device enables excellent size-based molecular selectivity; the hierarchical groove-pore structure supports a peculiar cascaded electromagnetic near-field enhancement mechanism, endowing the device with SERS-based molecular detection of ultrahigh sensitivity, uniformity, repeatability, and polarization independence. With such dual structural merits and performance enhancement, we demonstrate effective nanofiltration separation of small-sized adenine from big-sized ss-DNA and synergistic SERS determination of their species. We experimentally demonstrate an ultrasensitive detection of 4-mercaptopyridine down to 10 pM. Together with its unparalleled mechanical flexibility, this double-side-responsive plasmonic metasurface membrane can find great potential in real-world molecular filtration and detection under extremely complex working conditions.
Collapse
Affiliation(s)
- Shuangbao Lyu
- Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou 730000, China; School of Physical Science and Technology, Lanzhou University, Lanzhou 730000, China; School of Nuclear Science and Technology, University of Chinese Academy of Sciences, Beijing 100049, China
| | - Yongliang Zhang
- Institute of Semiconductors, Chinese Academy of Sciences, Beijing 100083, China
| | - Guanghua Du
- Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou 730000, China; School of Nuclear Science and Technology, University of Chinese Academy of Sciences, Beijing 100049, China
| | - Cuixia Di
- Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou 730000, China; School of Nuclear Science and Technology, University of Chinese Academy of Sciences, Beijing 100049, China
| | - Huijun Yao
- Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou 730000, China; School of Nuclear Science and Technology, University of Chinese Academy of Sciences, Beijing 100049, China; Advanced Energy Science and Technology Guangdong Laboratory, Huizhou 516000, China
| | - Yulong Fan
- Department of Materials Science and Engineering, City University of Hong Kong, 83, Tat Chee Avenue, Kowloon, Hong Kong, China
| | - Jinglai Duan
- Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou 730000, China; School of Nuclear Science and Technology, University of Chinese Academy of Sciences, Beijing 100049, China; Advanced Energy Science and Technology Guangdong Laboratory, Huizhou 516000, China.
| | - Dangyuan Lei
- Department of Materials Science and Engineering, City University of Hong Kong, 83, Tat Chee Avenue, Kowloon, Hong Kong, China.
| |
Collapse
|
4
|
Liang S, Schwartzkopf M, Roth SV, Müller-Buschbaum P. State of the art of ultra-thin gold layers: formation fundamentals and applications. NANOSCALE ADVANCES 2022; 4:2533-2560. [PMID: 36132287 PMCID: PMC9418724 DOI: 10.1039/d2na00127f] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 02/23/2022] [Accepted: 03/25/2022] [Indexed: 06/15/2023]
Abstract
Fabrication of ultra-thin gold (Au) layers (UTGLs) has been regarded as the key technique to achieve applications with tunable optical response, flexible sensors and electronic devices. Various strategies have been developed to optimize the wetting process of Au, resulting in the formation of UTGLs at a minimum thickness. The related studies on UTGLs attracted huge attention in recent years. On the one hand, the growth processes of UTGLs on different substrates were in-depth probed by advanced in situ characterization techniques and the effects of optimization strategies on the growth of UTGLs were also revealed. On the other hand, based on the understanding of the growth behavior and the assistance of optimization strategies, various applications of UTGLs were realized based on optical/plasmon responses, surface-enhanced Raman scattering and as electrodes for various sensors and electronic devices, as well as being seed layers for thin film growth. In this focused review, both the fundamental and practical studies on UTGLs in the most recent years are elaborated in detail. The growth processes of UTGLs revealed by in situ characterization techniques, such as grazing-incidence small-angle X-ray scattering (GISAXS), as well as the state of the art of UTGL-based applications, are reviewed.
Collapse
Affiliation(s)
- Suzhe Liang
- Technische Universität München, Lehrstuhl für Funktionelle Materialien, Physik-Department James-Franck-Str 1 85748 Garching Germany
| | | | - Stephan V Roth
- Deutsches Elektronen-Synchrotron DESY Notkestr. 85 22607 Hamburg Germany
- KTH Royal Institute of Technology, Department of Fibre and Polymer Technology Teknikringen 56-58 SE-100 44 Stockholm Sweden
| | - Peter Müller-Buschbaum
- Technische Universität München, Lehrstuhl für Funktionelle Materialien, Physik-Department James-Franck-Str 1 85748 Garching Germany
- Heinz Maier-Leibnitz Zentrum (MLZ), Technische Universität München Lichtenbergstr 85748 Garching Germany
| |
Collapse
|
5
|
Zou X, Chen K, Yao H, Chen C, Lu X, Ding P, Wang M, Hua X, Shan A. Chemical Reaction and Bonding Mechanism at the Polymer-Metal Interface. ACS APPLIED MATERIALS & INTERFACES 2022; 14:27383-27396. [PMID: 35648478 DOI: 10.1021/acsami.2c04971] [Citation(s) in RCA: 7] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
Polymer-metal hybrid structures have attracted significant attention recently due to their advantage of great weight reduction and excellent integrated physical/chemical properties. However, due to great physicochemical differences between polymers and metals, obtaining an interface with high bonding strength is a challenge, which makes it critically important to clarify the underlying bonding mechanisms. In the present research, we focused on revealing the underlying bonding mechanisms of a laminated Cr-coated steel-ethylene acrylic acid (EAA) strip prepared by hot roll bonding from the microscale to the molecular scale with experimental evidence. The microscale mechanical interlocking was analyzed and proven by scanning white light interferometry and scanning electron microscopy (SEM) by means of observing the surface and cross-sectional morphologies. Additionally, interfacial phases and chemical compositions were analyzed by transmission electron microscopy (TEM) and energy-dispersive X-ray spectroscopy (EDX). More directly and effectively, the interface was successfully exposed for X-ray photoelectron spectroscopy (XPS) analysis. Combined with time-of-flight secondary ion mass spectroscopy (ToF-SIMS) and depth profiling analysis, the formation of -(O═)C-O-Cr and -C-(O-Cr)2 covalent bonds through chemical reactions at the interface between -COOH and Cr2O3 was verified. Based on these characterization results, interfacial bonding mechanisms for the laminated Cr-coated steel-EAA strip were clearly identified to be chemical bonding and micromechanical interlocking, along with hydrogen bonding, which were all demonstrated with solid experimental evidence. In addition, 3D-render view and cross-section images of typical ion fragments at the interface were used to reveal the interfacial structure more comprehensively. The contributions of hydrogen bonds and covalent bonds to the interface were evaluated and compared for the first time. This study provides both methodological and theoretical guidance for investigating and understanding interfacial bonding formation in polymer-metal hybrid structures.
Collapse
Affiliation(s)
- Xin Zou
- School of Materials Science and Engineering, Shanghai Jiao Tong University, No. 800, Dong Chuan Road, Shanghai 200240, P. R. China
- Shanghai Key Laboratory of Materials Laser Processing and Modification, Shanghai Jiao Tong University, No. 800, Dong Chuan Road, Shanghai 200240, P. R. China
| | - Ke Chen
- School of Materials Science and Engineering, Shanghai Jiao Tong University, No. 800, Dong Chuan Road, Shanghai 200240, P. R. China
- Shanghai Key Laboratory of Materials Laser Processing and Modification, Shanghai Jiao Tong University, No. 800, Dong Chuan Road, Shanghai 200240, P. R. China
| | - Haining Yao
- School of Materials Science and Engineering, Shanghai Jiao Tong University, No. 800, Dong Chuan Road, Shanghai 200240, P. R. China
- Shanghai Key Laboratory of Materials Laser Processing and Modification, Shanghai Jiao Tong University, No. 800, Dong Chuan Road, Shanghai 200240, P. R. China
| | - Cong Chen
- School of Materials Science and Engineering, Shanghai Jiao Tong University, No. 800, Dong Chuan Road, Shanghai 200240, P. R. China
- Shanghai Key Laboratory of Materials Laser Processing and Modification, Shanghai Jiao Tong University, No. 800, Dong Chuan Road, Shanghai 200240, P. R. China
| | - Xueping Lu
- Shanghai Wangxun New Material Co., LTD, No. 1299, Pingan Road, Shanghai 201109, P. R. China
| | - Ping Ding
- Shanghai Wangxun New Material Co., LTD, No. 1299, Pingan Road, Shanghai 201109, P. R. China
| | - Min Wang
- School of Materials Science and Engineering, Shanghai Jiao Tong University, No. 800, Dong Chuan Road, Shanghai 200240, P. R. China
- Shanghai Key Laboratory of Materials Laser Processing and Modification, Shanghai Jiao Tong University, No. 800, Dong Chuan Road, Shanghai 200240, P. R. China
| | - Xueming Hua
- School of Materials Science and Engineering, Shanghai Jiao Tong University, No. 800, Dong Chuan Road, Shanghai 200240, P. R. China
- Shanghai Key Laboratory of Materials Laser Processing and Modification, Shanghai Jiao Tong University, No. 800, Dong Chuan Road, Shanghai 200240, P. R. China
| | - Aidang Shan
- School of Materials Science and Engineering, Shanghai Jiao Tong University, No. 800, Dong Chuan Road, Shanghai 200240, P. R. China
| |
Collapse
|
6
|
Wang J, Wang L, Su X, Xiao R, Cheng H. Polarization Maintaining Fiber Temperature and Stress Gradient Sensitization Sensor Based on Semiconductor-Metal-Polymer Three-Layer Film Coating. ACS APPLIED MATERIALS & INTERFACES 2022; 14:20053-20061. [PMID: 35438503 DOI: 10.1021/acsami.2c03102] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/14/2023]
Abstract
Increasing sensitivity, measuring points, and stability have always been the pursuit of sensors. ZnSe9:CO1 and Ag composite nano films were coated on polarization maintaining fiber (PMF). Then, the coated PMF was nested in capillary and hose which was encapsulated with polydimethylsiloxane (PDMS) and epoxy resin. The integrated capillary sensor and thermoplastic hose sensor were prepared. The gradient sensitization of various measurement parameters such as temperature, stress, and micro bending is realized. The temperature sensitivity is 1.49 nm/°C, the micro bending sensitivity is 1.72 nm/102 g, and the stress sensitivity is 6.27 nm/mε. The sensors maintain good linearity and instantaneous response while having high sensitivity. By adjusting the length of PMF, the number of troughs is increased in the same band range, and different troughs have different sensitivities, which solves the inherent problem of cross sensitivity and realizes multiparameter measurement. Capillary sensors are used for remote safe real-time monitoring of mechanical overheating, and hose sensors are used for real-time monitoring of bridge load and human joint bending. This work is of great significance to the extension of the application range of optical fiber sensor.
Collapse
Affiliation(s)
- Jin Wang
- College of Physics and Optoelectronics, Faculty of Science, Beijing University of Technology, Beijing 100124, China
| | - Li Wang
- College of Physics and Optoelectronics, Faculty of Science, Beijing University of Technology, Beijing 100124, China
| | - XueQiong Su
- College of Physics and Optoelectronics, Faculty of Science, Beijing University of Technology, Beijing 100124, China
| | - RanRan Xiao
- College of Physics and Optoelectronics, Faculty of Science, Beijing University of Technology, Beijing 100124, China
| | - Hao Cheng
- College of Physics and Optoelectronics, Faculty of Science, Beijing University of Technology, Beijing 100124, China
| |
Collapse
|
7
|
Beladiya V, Faraz T, Schmitt P, Munser AS, Schröder S, Riese S, Mühlig C, Schachtler D, Steger F, Botha R, Otto F, Fritz T, van Helvoirt C, Kessels WMM, Gargouri H, Szeghalmi A. Plasma-Enhanced Atomic Layer Deposition of HfO 2 with Substrate Biasing: Thin Films for High-Reflective Mirrors. ACS APPLIED MATERIALS & INTERFACES 2022; 14:14677-14692. [PMID: 35311275 DOI: 10.1021/acsami.1c21889] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/14/2023]
Abstract
Tuning ion energies in plasma-enhanced atomic layer deposition (PEALD) processes enables fine control over the material properties of functional coatings. The growth, structural, mechanical, and optical properties of HfO2 thin films are presented in detail toward photonic applications. The influence of the film thickness and bias value on the properties of HfO2 thin films deposited at 100 °C using tetrakis(dimethylamino)hafnium (TDMAH) and oxygen plasma using substrate biasing is systematically analyzed. The HfO2 films deposited without a substrate bias show an amorphous microstructure with a low density, low refractive index, high incorporation of residual hydroxyl (OH) content, and high residual tensile stress. The material properties of HfO2 films significantly improved at a low bias voltage due to the interaction with oxygen ions accelerated to the film. Such HfO2 films have a higher density, higher refractive index, and lower residual OH incorporation than films without bias. The mechanical stress becomes compressive depending on the bias values. Further increasing the ion energies by applying a larger substrate bias results in a decrease of the film density, refractive index, and a higher residual OH incorporation as well as crystalline inclusions. The comparable material properties of the HfO2 films have been reported using tris(dimethylamino)cyclopentadienyl hafnium (TDMACpH) in a different apparatus, indicating that this approach can be transferred to various systems and is highly versatile. Finally, the substrate biasing technique has been introduced to deposit stress-compensated, crack- and delamination-free high-reflective (HR) mirrors at 355 and 532 nm wavelengths using HfO2 and SiO2 as high and low refractive index materials, respectively. Such mirrors could not be obtained without the substrate biasing during the deposition because of the high tensile stress of HfO2, leading to cracks in thick multilayer systems. An HR mirror for 532 nm wavelength shows a high reflectance of 99.93%, a residual transmittance of ∼530 ppm, and a low absorption of ∼11 ppm, as well as low scattering losses of ∼4 ppm, high laser-induced damage threshold, low mechanical stress, and high environmental stability.
Collapse
Affiliation(s)
- Vivek Beladiya
- Institute of Applied Physics, Friedrich Schiller University Jena, Albert-Einstein Str. 15, 07745 Jena, Germany
- Fraunhofer Institute for Applied Optics and Precision Engineering, Albert-Einstein-Str. 7, 07745 Jena, Germany
| | - Tahsin Faraz
- Department of Applied Physics, Eindhoven University of Technology, P.O. Box 513, 5600 MB Eindhoven, The Netherlands
| | - Paul Schmitt
- Institute of Applied Physics, Friedrich Schiller University Jena, Albert-Einstein Str. 15, 07745 Jena, Germany
- Fraunhofer Institute for Applied Optics and Precision Engineering, Albert-Einstein-Str. 7, 07745 Jena, Germany
| | - Anne-Sophie Munser
- Institute of Applied Physics, Friedrich Schiller University Jena, Albert-Einstein Str. 15, 07745 Jena, Germany
- Fraunhofer Institute for Applied Optics and Precision Engineering, Albert-Einstein-Str. 7, 07745 Jena, Germany
| | - Sven Schröder
- Fraunhofer Institute for Applied Optics and Precision Engineering, Albert-Einstein-Str. 7, 07745 Jena, Germany
| | | | - Christian Mühlig
- Leibniz-Institute of Photonic Technology, Albert-Einstein-Str. 9, 07745 Jena, Germany
| | | | - Fabian Steger
- RhySearch, Werdenbergstrasse 4, 9471 Buchs, Switzerland
| | - Roelene Botha
- RhySearch, Werdenbergstrasse 4, 9471 Buchs, Switzerland
| | - Felix Otto
- Institute of Solid State Physics, Friedrich Schiller University Jena, Helmholtzweg 5, 07743 Jena, Germany
| | - Torsten Fritz
- Institute of Solid State Physics, Friedrich Schiller University Jena, Helmholtzweg 5, 07743 Jena, Germany
| | - Christian van Helvoirt
- Department of Applied Physics, Eindhoven University of Technology, P.O. Box 513, 5600 MB Eindhoven, The Netherlands
| | - Wilhelmus M M Kessels
- Department of Applied Physics, Eindhoven University of Technology, P.O. Box 513, 5600 MB Eindhoven, The Netherlands
| | - Hassan Gargouri
- Sentech Instruments GmbH, Schwarzschildstraße 2, 12489 Berlin, Germany
| | - Adriana Szeghalmi
- Institute of Applied Physics, Friedrich Schiller University Jena, Albert-Einstein Str. 15, 07745 Jena, Germany
- Fraunhofer Institute for Applied Optics and Precision Engineering, Albert-Einstein-Str. 7, 07745 Jena, Germany
| |
Collapse
|
8
|
Wei P, Shen Z, Qin X, Zhang P, Bu L, Chen Q, Roth SV, Lu G. Improving Charge Injection at Gold/Conjugated Polymer Contacts by Polymer Insulator-Assisted Annealing for Transistors. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2022; 18:e2105896. [PMID: 34913586 DOI: 10.1002/smll.202105896] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/26/2021] [Revised: 11/17/2021] [Indexed: 06/14/2023]
Abstract
The poor chemical miscibility between metal and organic materials usually leads to both structural and energetic mismatches at gold/organic interfaces, and thereby, high contact resistance of organic electronic devices. This study shows that the contact resistance of organic field-effect transistors is significantly reduced by one order of magnitude, by reforming the contact interface between gold electrodes and conjugated polymers upon a polymer insulator-assisted thermal annealing. Upon an optimized solution process, the conjugated polymer is homogenously distributed within the amorphous polymer insulator matrix with relatively low glass transition temperature, and thus, even a moderate annealing temperature can induce sufficient motion of conjugated polymer chains to simultaneously adjust the polymer orientation and improve the packing of gold atoms. Consequently, gold/conjugated polymer contact is reorganized after annealing, which improves both charge transport from bulk gold to interface and charge injection from gold into conjugated polymers. This method, with appropriate insulator matrix, is effective for improving the injection of both holes and electrons, and widely applicable for many unipolar and ambipolar conjugated polymers to optimize the device performance and simultaneously increase the optical transparency (over 80%). A frequency doubler and a phase modulator are demonstrated, respectively, using the ambipolar transistors with optimized charge injection properties.
Collapse
Affiliation(s)
- Peng Wei
- State Key Laboratory of Electrical Insulation and Power Equipment, and Frontier Institute of Science and Technology, Xi'an Jiaotong University, Xi'an, Shaanxi, 710054, China
| | - Zichao Shen
- State Key Laboratory of Electrical Insulation and Power Equipment, and Frontier Institute of Science and Technology, Xi'an Jiaotong University, Xi'an, Shaanxi, 710054, China
| | - Xinsu Qin
- School of Chemistry, Xi'an Jiaotong University, Xi'an, Shaanxi, 710049, China
| | - Peng Zhang
- School of Material Science and Engineering, PCFM Lab, Sun Yat-sen University, Guangzhou, Guangdong, 510275, China
| | - Laju Bu
- School of Chemistry, Xi'an Jiaotong University, Xi'an, Shaanxi, 710049, China
| | - Qing Chen
- Deutsches Elektronen-Synchrotron (DESY), Notkestr. 85, D-22607, Hamburg, Germany
| | - Stephan V Roth
- Deutsches Elektronen-Synchrotron (DESY), Notkestr. 85, D-22607, Hamburg, Germany
| | - Guanghao Lu
- State Key Laboratory of Electrical Insulation and Power Equipment, and Frontier Institute of Science and Technology, Xi'an Jiaotong University, Xi'an, Shaanxi, 710054, China
| |
Collapse
|
9
|
Liu C, Wang G, Zhang L, Fan F, Zhang X, Fu Y, Wang T. Dynamic Color Display with Viewing-Angle Tolerance Based on the Responsive Asymmetric Fabry-Perot Cavity. ACS APPLIED MATERIALS & INTERFACES 2022; 14:7200-7207. [PMID: 35089686 DOI: 10.1021/acsami.1c24270] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/14/2023]
Abstract
At present, it remains challenging and desirable to prepare dynamic color-changing materials with wide viewing angles for practical applications. Herein, we proposed a responsive asymmetric metal-insulator-metal (MIM) Fabry-Perot resonance cavity to achieve dynamic color display with high viewing-angle tolerance. The responsive asymmetric MIM cavity is constructed with thermal-responsive poly(N-isopropyl acrylamide) (PNIPAm) brush as the mid-insulator layer sandwiched by two different metallic layers (Sn and Ag). The as-prepared MIM cavity shows both improved viewing-angle tolerance owing to the asymmetric architecture of the cavity and a wide tunable color gamut because of the thermal responsiveness of the mid PNIPAm layer. Remarkably, the as-prepared asymmetric MIM resonance cavity also possesses a relatively fast response rate and good repeatability. Together, with all these advantages, the proposed responsive asymmetric MIM cavity may open a new pathway to prepare high-performance color display material for future practical optical applications.
Collapse
Affiliation(s)
- Chao Liu
- Department of Chemistry, College of Sciences, Northeastern University, Shenyang 110819, P. R. China
| | - Guangrong Wang
- Department of Chemistry, College of Sciences, Northeastern University, Shenyang 110819, P. R. China
| | - Liying Zhang
- Department of Chemistry, College of Sciences, Northeastern University, Shenyang 110819, P. R. China
| | - Fuqiang Fan
- Department of Chemistry, College of Sciences, Northeastern University, Shenyang 110819, P. R. China
| | - Xuemin Zhang
- Department of Chemistry, College of Sciences, Northeastern University, Shenyang 110819, P. R. China
| | - Yu Fu
- Department of Chemistry, College of Sciences, Northeastern University, Shenyang 110819, P. R. China
| | - Tieqiang Wang
- Department of Chemistry, College of Sciences, Northeastern University, Shenyang 110819, P. R. China
| |
Collapse
|
10
|
Abir SSH, Sadaf MUK, Saha SK, Touhami A, Lozano K, Uddin MJ. Nanofiber-Based Substrate for a Triboelectric Nanogenerator: High-Performance Flexible Energy Fiber Mats. ACS APPLIED MATERIALS & INTERFACES 2021; 13:60401-60412. [PMID: 34882388 DOI: 10.1021/acsami.1c17964] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
Flexible and stretchable triboelectric nanogenerators (TENGs) are the next-generation systems for wearable and portable electronics. In this study, we have demonstrated an all nanofiber-based TENG for energy harvesting and biomechanical sensing applications. The TENG was prepared using the Forcespinning (FS) method to produce poly(vinylidene fluoride) (PVDF) and thermoplastic polyurethane (TPU) nanofiber (NF) membranes. The TPU nanofiber membranes were interfaced with a homogeneously sputtered gold nanofilm. The experimental characterization of the PVDF-TPU/Au NF-TENG revealed that surface interfaced with dispersed gold in a TPU fiber membrane produced a maximum open-circuit voltage of 254 V and a short-circuit current of 86 μA output at a 240 bpm load frequency, which was, respectively, 112 and 87% greater than bare PVDF-TPU NF-based TENG. All systems were composed of an active contact surface area of 3.2 × 2.5 cm2. Furthermore, the TENG was able to light up 75 LEDs (1.5 V of each) by the hand-tapping motion. The resistive load and capacitor test results exemplified a TENG offering a simple and high-performance self-chargeable device. Furthermore, we have tested the TENG's response for biomechanical movements at different frequencies, suggesting the TENG's potential to be also used as a cost-effective self-powered flexible body motion sensor.
Collapse
Affiliation(s)
- Sk Shamim Hasan Abir
- Photonics and Energy Research Laboratory, University of Texas Rio Grande Valley, Edinburg, Texas 78539, United States
- Center for Nanotechnology, Department of Mechanical Engineering, University of Texas Rio Grande Valley, Edinburg, Texas 78539, United States
| | - Muhtasim Ul Karim Sadaf
- Photonics and Energy Research Laboratory, University of Texas Rio Grande Valley, Edinburg, Texas 78539, United States
- Department of Chemistry, University of Texas Rio Grande Valley, Edinburg, Texas 78539, United States
| | - Sunanda Kumar Saha
- Center for Nanotechnology, Department of Mechanical Engineering, University of Texas Rio Grande Valley, Edinburg, Texas 78539, United States
| | - Ahmed Touhami
- Department of Physics and Astronomy, University of Texas Rio Grande Valley, Brownsville, Texas 78520, United States
| | - Karen Lozano
- Center for Nanotechnology, Department of Mechanical Engineering, University of Texas Rio Grande Valley, Edinburg, Texas 78539, United States
| | - Mohammed Jasim Uddin
- Photonics and Energy Research Laboratory, University of Texas Rio Grande Valley, Edinburg, Texas 78539, United States
- Department of Chemistry, University of Texas Rio Grande Valley, Edinburg, Texas 78539, United States
| |
Collapse
|
11
|
Gensch M, Schwartzkopf M, Brett CJ, Schaper SJ, Li N, Chen W, Liang S, Drewes J, Polonskyi O, Strunskus T, Faupel F, Müller-Buschbaum P, Roth SV. Correlating Optical Reflectance with the Topology of Aluminum Nanocluster Layers Growing on Partially Conjugated Diblock Copolymer Templates. ACS APPLIED MATERIALS & INTERFACES 2021; 13:56663-56673. [PMID: 34788001 PMCID: PMC8640968 DOI: 10.1021/acsami.1c18324] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 09/22/2021] [Accepted: 11/03/2021] [Indexed: 06/13/2023]
Abstract
Large-scale fabrication of metal cluster layers for usage in sensor applications and photovoltaics is a huge challenge. Physical vapor deposition offers large-scale fabrication of metal cluster layers on templates and polymer surfaces. In the case of aluminum (Al), only little is known about the formation and interaction of Al clusters during sputter deposition. Complex polymer surface morphologies can tailor the deposited Al cluster layer. Here, a poly(methyl methacrylate)-block-poly(3-hexylthiophen-2,5-diyl) (PMMA-b-P3HT) diblock copolymer template is used to investigate the nanostructure formation of Al cluster layers on the different polymer domains and to compare it with the respective homopolymers PMMA and P3HT. The optical properties relevant for sensor applications are monitored with ultraviolet-visible (UV-vis) measurements during the sputter deposition. The formation of Al clusters is followed in situ with grazing-incidence small-angle X-ray scattering (GISAXS), and the chemical interaction is revealed by X-ray photoelectron spectroscopy (XPS). Furthermore, atomic force microscopy (AFM) and field emission scanning electron microscopy (FESEM) yield topographical information about selective wetting of Al on the P3HT domains and embedding in the PMMA domains in the early stages, followed by four distinct growth stages describing the Al nanostructure formation.
Collapse
Affiliation(s)
- Marc Gensch
- Deutsches
Elektronen-Synchrotron DESY, Notkestr. 85, 22607 Hamburg, Germany
- Lehrstuhl
für Funktionelle Materialien, Physik-Department, Technische Universität München, James-Franck-Str. 1, D-85748 Garching, Germany
| | | | - Calvin J. Brett
- Deutsches
Elektronen-Synchrotron DESY, Notkestr. 85, 22607 Hamburg, Germany
- Department
of Engineering Mechanics, KTH Royal Institute
of Technology, Teknikringen
8, SE-100 44 Stockholm, Sweden
- Wallenberg
Wood Science Center, KTH Royal Institute
of Technology, Teknikringen
56-58, SE-100 44 Stockholm, Sweden
| | - Simon J. Schaper
- Lehrstuhl
für Funktionelle Materialien, Physik-Department, Technische Universität München, James-Franck-Str. 1, D-85748 Garching, Germany
| | - Nian Li
- Lehrstuhl
für Funktionelle Materialien, Physik-Department, Technische Universität München, James-Franck-Str. 1, D-85748 Garching, Germany
| | - Wei Chen
- Lehrstuhl
für Funktionelle Materialien, Physik-Department, Technische Universität München, James-Franck-Str. 1, D-85748 Garching, Germany
| | - Suzhe Liang
- Lehrstuhl
für Funktionelle Materialien, Physik-Department, Technische Universität München, James-Franck-Str. 1, D-85748 Garching, Germany
| | - Jonas Drewes
- Lehrstuhl
für Materialverbunde, Institut für Materialwissenschaft, Christian-Albrechts-Universität zu Kiel, Kaiserstr.2, D-24143 Kiel, Germany
| | - Oleksandr Polonskyi
- Gordon
Lab, University of California, Santa Barbara, California 93106-5080, United States
| | - Thomas Strunskus
- Lehrstuhl
für Materialverbunde, Institut für Materialwissenschaft, Christian-Albrechts-Universität zu Kiel, Kaiserstr.2, D-24143 Kiel, Germany
| | - Franz Faupel
- Lehrstuhl
für Materialverbunde, Institut für Materialwissenschaft, Christian-Albrechts-Universität zu Kiel, Kaiserstr.2, D-24143 Kiel, Germany
| | - Peter Müller-Buschbaum
- Lehrstuhl
für Funktionelle Materialien, Physik-Department, Technische Universität München, James-Franck-Str. 1, D-85748 Garching, Germany
- Heinz-Maier-Leibniz
Zentrum (MLZ), Technische Universität
München, Lichtenbergstraße 1, D-85748 Garching, Germany
| | - Stephan V. Roth
- Deutsches
Elektronen-Synchrotron DESY, Notkestr. 85, 22607 Hamburg, Germany
- Department
of Fiber and Polymer Technology, KTH Royal
Institute of Technology, Teknikringen 56-58, SE-100 44 Stockholm, Sweden
| |
Collapse
|
12
|
Chervinskii S, Issah I, Lahikainen M, Rashed AR, Kuntze K, Priimagi A, Caglayan H. Humidity- and Temperature-Tunable Metal-Hydrogel-Metal Reflective Filters. ACS APPLIED MATERIALS & INTERFACES 2021; 13:50564-50572. [PMID: 34643385 PMCID: PMC8554756 DOI: 10.1021/acsami.1c15616] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/16/2021] [Accepted: 10/04/2021] [Indexed: 06/01/2023]
Abstract
A tunable reflectance filter based on a metal-hydrogel-metal structure responsive to humidity and temperature is reported. The filter employs a poly(N-isopropylacrylamide)-acrylamidobenzophenone (PNIPAm-BP) hydrogel as an insulator layer in the metal-insulator-metal (MIM) assembly. The optical resonance of the structure is tunable by water immersion across the visible and near-infrared range. Swelling/deswelling and the volume phase transition of the hydrogel allow continuous reversible humidity- and/or temperature-induced tuning of the optical resonance. This work paves the way toward low-cost large-area fabrication of actively tunable reversible photonic devices.
Collapse
|
13
|
Li H, Roth SV, Freychet G, Zhernenkov M, Asta N, Wågberg L, Pettersson T. Structure Development of the Interphase between Drying Cellulose Materials Revealed by In Situ Grazing-Incidence Small-Angle X-ray Scattering. Biomacromolecules 2021; 22:4274-4283. [PMID: 34541856 PMCID: PMC8512666 DOI: 10.1021/acs.biomac.1c00845] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/04/2021] [Revised: 09/07/2021] [Indexed: 11/29/2022]
Abstract
The nano- to microscale structures at the interface between materials can define the macroscopic material properties. These structures are extremely difficult to investigate for complex material systems, such as cellulose-rich materials. The development of new model cellulose materials and measuring techniques has opened new possibilities to resolve this problem. We present a straightforward approach combining micro-focusing grazing-incidence small-angle X-ray scattering and atomic force microscopy (AFM) to investigate the structural rearrangements of cellulose/cellulose interfaces in situ during drying. Based on the results, we propose that molecular interdiffusion and structural rearrangement play a major role in the development of the properties of the cellulose/cellulose interphase; this model is representative of the development of the properties of joint/contact points between macroscopic cellulose fibers.
Collapse
Affiliation(s)
- Hailong Li
- Department
of Fibre and Polymer Technology, KTH Royal
Institute of Technology, Teknikringen 58, SE-100 44 Stockholm, Sweden
- Department
of Physics, AlbaNova University Center, Stockholm University, Stockholm 10691, Sweden
| | - Stephan V. Roth
- Deutsches
Elektronen-Synchrotron (DESY), Notkestr. 85, Hamburg 22607, Germany
| | - Guillaume Freychet
- National
Synchrotron Light Source II, Brookhaven
National Laboratory, Upton, New York 11973, United States
| | - Mikhail Zhernenkov
- National
Synchrotron Light Source II, Brookhaven
National Laboratory, Upton, New York 11973, United States
| | - Nadia Asta
- Department
of Fibre and Polymer Technology, KTH Royal
Institute of Technology, Teknikringen 58, SE-100 44 Stockholm, Sweden
| | - Lars Wågberg
- Department
of Fibre and Polymer Technology, KTH Royal
Institute of Technology, Teknikringen 58, SE-100 44 Stockholm, Sweden
- Wallenberg
Wood Science Centre, Department of Fibre and Polymer Technology, KTH Royal Institute of Technology, Teknikringen 56, Stockholm 10044, Sweden
| | - Torbjörn Pettersson
- Department
of Fibre and Polymer Technology, KTH Royal
Institute of Technology, Teknikringen 58, SE-100 44 Stockholm, Sweden
- Wallenberg
Wood Science Centre, Department of Fibre and Polymer Technology, KTH Royal Institute of Technology, Teknikringen 56, Stockholm 10044, Sweden
| |
Collapse
|
14
|
Lee W, Chae H, Oh DK, Lee M, Chun H, Yeon G, Park J, Kim J, Youn H, Rho J, Ok JG. Solution-processable electrode-material embedding in dynamically inscribed nanopatterns (SPEEDIN) for continuous fabrication of durable flexible devices. MICROSYSTEMS & NANOENGINEERING 2021; 7:74. [PMID: 34631142 PMCID: PMC8473567 DOI: 10.1038/s41378-021-00307-5] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 03/17/2021] [Revised: 07/15/2021] [Accepted: 08/29/2021] [Indexed: 06/13/2023]
Abstract
A facile and scalable lithography-free fabrication technique, named solution-processable electrode-material embedding in dynamically inscribed nanopatterns (SPEEDIN), is developed to produce highly durable electronics. SPEEDIN uniquely utilizes a single continuous flow-line manufacturing process comprised of dynamic nanoinscribing and metal nanoparticle solution coating with selective embedding. Nano- and/or micro-trenches are inscribed into arbitrary polymers, and then an Ag nanoparticle solution is dispersed, soft-baked, doctor-bladed, and hard-baked to embed Ag micro- and nanowire structures into the trenches. Compared to lithographically embossed metal structures, the embedded SPEEDIN architectures can achieve higher durability with comparable optical and electrical properties and are robust and power-efficient even under extreme stresses such as scratching and bending. As one tangible application of SPEEDIN, we demonstrate a flexible metal electrode that can operate at 5 V at temperatures up to 300 °C even under the influence of harsh external stimuli. SPEEDIN can be applied to the scalable fabrication of diverse flexible devices that are reliable for heavy-duty operation in harsh environments involving high temperatures, mechanical deformations, and chemical hazards.
Collapse
Affiliation(s)
- Wonseok Lee
- Department of Mechanical and Automotive Engineering, Seoul National University of Science and Technology, Seoul, 01811 Republic of Korea
| | - Hyoungseok Chae
- Department of Mechanical and Automotive Engineering, Seoul National University of Science and Technology, Seoul, 01811 Republic of Korea
| | - Dong Kyo Oh
- Department of Mechanical Engineering, Pohang University of Science and Technology (POSTECH), Pohang, 37673 Republic of Korea
| | - Minyoung Lee
- Department of Mechanical and Automotive Engineering, Seoul National University of Science and Technology, Seoul, 01811 Republic of Korea
| | - Hyunsoo Chun
- Graduate Program of Energy Technology, School of Integrated Technology, Institute of Integrated Technology, Gwangju Institute of Science and Technology, Gwangju, 61005 Republic of Korea
| | - Gyubeom Yeon
- Department of Mechanical and Automotive Engineering, Seoul National University of Science and Technology, Seoul, 01811 Republic of Korea
| | - Jaewon Park
- Department of Mechanical and Automotive Engineering, Seoul National University of Science and Technology, Seoul, 01811 Republic of Korea
| | - Joohoon Kim
- Department of Mechanical Engineering, Pohang University of Science and Technology (POSTECH), Pohang, 37673 Republic of Korea
| | - Hongseok Youn
- Department of Mechanical Engineering, Hanbat National University, Daejeon, 34158 Republic of Korea
| | - Junsuk Rho
- Department of Mechanical Engineering, Pohang University of Science and Technology (POSTECH), Pohang, 37673 Republic of Korea
- Department of Chemical Engineering, Pohang University of Science and Technology (POSTECH), Pohang, 37673 Republic of Korea
- POSCO-POSTECH-RIST Convergence Research Center for Flat Optics and Metaphotonics, Pohang, 37673 Republic of Korea
| | - Jong G Ok
- Department of Mechanical and Automotive Engineering, Seoul National University of Science and Technology, Seoul, 01811 Republic of Korea
| |
Collapse
|
15
|
Kim SH, Rho Y, Cho E, Myung JS, Lee SJ. Surface plasmonic resonance tunable nanocomposite thin films applicable to color filters, heat mirrors, semi-transparent electrodes, and electromagnetic-shields. NANOSCALE 2021; 13:12260-12270. [PMID: 34241610 DOI: 10.1039/d1nr02363b] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
This study proposes a plasmonic resonance-tunable nanocomposite thin film, which applies to a color filter, heat mirror, semi-transparent color electrode, and electromagnetic shield, given that the size and structure of nanoclusters can be controlled by a sputtering power density. The structural and functional properties of silver/plasma-polymer-fluorocarbon (Ag/PPFC) nanocomposite thin films, which were sputtered by ternary composite targets, were investigated with various compositions and sputtering power densities. The growth of Ag nanoclusters of the thin film was suppressed as the sputtering power density increased due to the rich functional group of -CFx- fluorine. As a result, a continuous color change from blue to yellow could be expressed on films given the precise control of the surface plasmonic resonance phenomenon. Grazing-incidence small-angle scattering (GISAXS) analysis indicated that the sputtering power density had a significant effect on the size, distribution, and orientation of the Ag nanoclusters in the thin film. For low sputtering power densities, Ag nanoclusters were forming aggregations along the out-of-plane direction, but as the sputtering power density increased, the nanoclusters showed random distribution instead of large aggregates. We also demonstrated applications of Ag/PPFC nanocomposite thin films to a color filter, heat mirror, semi-transparent electrode, and electromagnetic shield. In addition, the fabrication of a large-area film (400 × 700 mm2) showed that the approach applies highly to industries.
Collapse
Affiliation(s)
- Sung Hyun Kim
- Chemical Materials Solutions Center, Korea Research Institute of Chemical Technology, Daejeon 34114, Republic of Korea.
| | | | | | | | | |
Collapse
|
16
|
Robust LSPR Sensing Using Thermally Embedded Au Nanoparticles in Glass Substrates. NANOMATERIALS 2021; 11:nano11061592. [PMID: 34204448 PMCID: PMC8235226 DOI: 10.3390/nano11061592] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/18/2021] [Revised: 06/04/2021] [Accepted: 06/09/2021] [Indexed: 12/31/2022]
Abstract
The poor adhesion and chemical and thermal stability of plasmonic nanostructures deposited on solid surfaces are a hindrance to the longevity and long-term development of robust localized surface plasmon resonance (LSPR)-based systems. In this paper, we have deposited gold (Au) nanolayers with thicknesses above the percolation limit over glass substrates and have used a thermal annealing treatment at a temperature above the substrate’s glass transition temperature to promote the dewetting, recrystallization, and thermal embedding of Au nanoparticles (NPs). Due to the partial embedding in glass, the NPs were strongly adherent to the surface of the substrate and were able to resist to the commonly used cleaning procedures and mechanical adhesion tests alike. The reflectivity of the embedded nanostructures was studied and shown to be strongly dependent on the NP size/shape distributions and on the degree of NP embedding. Strong optical scattering bands with increasing width and redshifted LSPR peak position were observed with the Au content. Refractive index sensitivity (RIS) values between 150 and 360 nm/RIU (concerning LSPR band edge shift) or between 32 and 72 nm/RIU (concerning LSPR peak position shift) were obtained for the samples having narrower LSPR extinction bands. These robust LSPR sensors can be used following a simple excitation/detection scheme consisting of a reflectance measurement at a fixed angle and wavelength.
Collapse
|
17
|
Wang Z, Ding H, Liu D, Xu C, Li B, Niu S, Li J, Liu L, Zhao J, Zhang J, Mu Z, Han Z, Ren L. Large-Scale Bio-Inspired Flexible Antireflective Film with Scale-Insensitivity Arrays. ACS APPLIED MATERIALS & INTERFACES 2021; 13:23103-23112. [PMID: 33973761 DOI: 10.1021/acsami.1c02046] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/12/2023]
Abstract
Natural creatures can always provide perfect strategies for excellent antireflection (AR), which is valuable for photovoltaic industry, optical devices, and flexible displays. However, limited by precision, it is still difficult to guarantee the consistency between the artificial structures and the original biological structures. Here, a novel large-scale flexible AR film is inspired by the cicada wings and successfully fabricated with a recycled template. On the one hand, the adjustable structures on porous templates make it possible to optimize the design of AR structure parameters toward the practical demand. On the other hand, it breaks the limitation of the biological organism size, accomplishing the replication of AR nanostructure units in a large scale. Interestingly, even if the film is covered by enlarged dome cone arrays, it still maintains almost perfect AR property, achieving excellent scale-insensitivity AR performance. This work numerically and experimentally investigates its scale-insensitivity AR performance in detail. Compared with subwavelength nanocones, enlarged cones change the original optical behaviors, and the proportion of transmitted light is reduced while scattering and absorption increase. Based on this, these bio-inspired scale-insensitivity AR arrays could be used in flexible displays, photothermic conversion, solar cells, and so on.
Collapse
Affiliation(s)
- Ze Wang
- Key Laboratory of Bionic Engineering, Ministry of Education, Jilin University, Changchun 130022, China
| | - Hanliang Ding
- Key Laboratory of Bionic Engineering, Ministry of Education, Jilin University, Changchun 130022, China
| | - Delei Liu
- Key Laboratory of Bionic Engineering, Ministry of Education, Jilin University, Changchun 130022, China
| | - Conghao Xu
- Key Laboratory of Bionic Engineering, Ministry of Education, Jilin University, Changchun 130022, China
| | - Bo Li
- Key Laboratory of Bionic Engineering, Ministry of Education, Jilin University, Changchun 130022, China
| | - Shichao Niu
- Key Laboratory of Bionic Engineering, Ministry of Education, Jilin University, Changchun 130022, China
| | - Jian Li
- College of Chemistry and Chemical Engineering, Northwest Normal University, Lanzhou 730070, China
| | - Linpeng Liu
- Key Laboratory of Bionic Engineering, Ministry of Education, Jilin University, Changchun 130022, China
| | - Jie Zhao
- Key Laboratory of Bionic Engineering, Ministry of Education, Jilin University, Changchun 130022, China
| | - Junqiu Zhang
- Key Laboratory of Bionic Engineering, Ministry of Education, Jilin University, Changchun 130022, China
| | - Zhengzhi Mu
- Key Laboratory of Bionic Engineering, Ministry of Education, Jilin University, Changchun 130022, China
| | - Zhiwu Han
- Key Laboratory of Bionic Engineering, Ministry of Education, Jilin University, Changchun 130022, China
| | - Luquan Ren
- Key Laboratory of Bionic Engineering, Ministry of Education, Jilin University, Changchun 130022, China
| |
Collapse
|
18
|
Liang S, Chen W, Yin S, Schaper SJ, Guo R, Drewes J, Carstens N, Strunskus T, Gensch M, Schwartzkopf M, Faupel F, Roth SV, Cheng YJ, Müller-Buschbaum P. Tailoring the Optical Properties of Sputter-Deposited Gold Nanostructures on Nanostructured Titanium Dioxide Templates Based on In Situ Grazing-Incidence Small-Angle X-ray Scattering Determined Growth Laws. ACS APPLIED MATERIALS & INTERFACES 2021; 13:14728-14740. [PMID: 33734685 DOI: 10.1021/acsami.1c00972] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/12/2023]
Abstract
Gold/titanium dioxide (Au/TiO2) nanohybrid materials have been widely applied in various fields because of their outstanding optical and photocatalytic performance. By state-of-the-art polymer templating, it is possible to make uniform nanostructured TiO2 layers with potentially large-scale processing methods. We use customized polymer templating to achieve TiO2 nanostructures with different morphologies. Au/TiO2 hybrid thin films are fabricated by sputter deposition. An in-depth understanding of the Au morphology on the TiO2 templates is achieved with in situ grazing-incidence small-angle X-ray scattering (GISAXS) during the sputter deposition. The resulting Au nanostructure is largely influenced by the TiO2 template morphology. Based on the detailed understanding of the Au growth process, characteristic distances can be selected to achieve tailored Au nanostructures at different Au loadings. For selected sputter-deposited Au/TiO2 hybrid thin films, the optical response with a tailored localized surface plasmon resonance is demonstrated.
Collapse
Affiliation(s)
- Suzhe Liang
- Lehrstuhl für Funktionelle Materialien, Physik-Department, Technische Universität München, James-Franck-Str. 1, 85748 Garching, Germany
| | - Wei Chen
- Lehrstuhl für Funktionelle Materialien, Physik-Department, Technische Universität München, James-Franck-Str. 1, 85748 Garching, Germany
| | - Shanshan Yin
- Lehrstuhl für Funktionelle Materialien, Physik-Department, Technische Universität München, James-Franck-Str. 1, 85748 Garching, Germany
| | - Simon J Schaper
- Lehrstuhl für Funktionelle Materialien, Physik-Department, Technische Universität München, James-Franck-Str. 1, 85748 Garching, Germany
| | - Renjun Guo
- Lehrstuhl für Funktionelle Materialien, Physik-Department, Technische Universität München, James-Franck-Str. 1, 85748 Garching, Germany
| | - Jonas Drewes
- Lehrstuhl für Materialverbunde, Institut für Materialwissenschaft, Christian-Albrechts-Universität zu Kiel, Kaiserstr. 2, 24143 Kiel, Germany
| | - Niko Carstens
- Lehrstuhl für Materialverbunde, Institut für Materialwissenschaft, Christian-Albrechts-Universität zu Kiel, Kaiserstr. 2, 24143 Kiel, Germany
| | - Thomas Strunskus
- Lehrstuhl für Materialverbunde, Institut für Materialwissenschaft, Christian-Albrechts-Universität zu Kiel, Kaiserstr. 2, 24143 Kiel, Germany
| | - Marc Gensch
- Lehrstuhl für Funktionelle Materialien, Physik-Department, Technische Universität München, James-Franck-Str. 1, 85748 Garching, Germany
- Deutsches Elektronen-Synchrotron (DESY), Notkestr. 85, 22607 Hamburg, Germany
| | | | - Franz Faupel
- Lehrstuhl für Materialverbunde, Institut für Materialwissenschaft, Christian-Albrechts-Universität zu Kiel, Kaiserstr. 2, 24143 Kiel, Germany
| | - Stephan V Roth
- Deutsches Elektronen-Synchrotron (DESY), Notkestr. 85, 22607 Hamburg, Germany
- Department of Fibre and Polymer Technology, KTH Royal Institute of Technology, Teknikringen 56-58, SE-100 44 Stockholm, Sweden
| | - Ya-Jun Cheng
- Ningbo Institute of Materials Technology & Engineering, Chinese Academy of Sciences, 1219 Zhongguan West Road, Zhenhai District, Ningbo, Zhejiang Province 315201, P. R. China
- Department of Materials, University of Oxford, Parks Road, OX1 3PH Oxford, United Kingdom
| | - Peter Müller-Buschbaum
- Lehrstuhl für Funktionelle Materialien, Physik-Department, Technische Universität München, James-Franck-Str. 1, 85748 Garching, Germany
- Heinz Maier-Leibniz Zentrum (MLZ), Technische Universität München, Lichtenbergstraße 1, 85748 Garching, Germany
| |
Collapse
|
19
|
Metal-Insulator Transition of Ultrathin Sputtered Metals on Phenolic Resin Thin Films: Growth Morphology and Relations to Surface Free Energy and Reactivity. NANOMATERIALS 2021; 11:nano11030589. [PMID: 33652867 PMCID: PMC7996922 DOI: 10.3390/nano11030589] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 01/12/2021] [Revised: 02/18/2021] [Accepted: 02/20/2021] [Indexed: 12/03/2022]
Abstract
Nanostructured metal assemblies on thin and ultrathin polymeric films enable state of the art technologies and have further potential in diverse fields. Rational design of the structure–function relationship is of critical importance but aggravated by the scarcity of systematic studies. Here, we studied the influence of the interplay between metal and polymer surface free energy and reactivity on the evolution of electric conductivity and the resulting morphologies. In situ resistance measurements during sputter deposition of Ag, Au, Cu and Ni films on ultrathin reticulated polymer films collectively reveal metal–insulator transitions characteristic for Volmer–Weber growth. The different onsets of percolation correlate with interfacial energy and energy of adhesion weakly but as expected from ordinary wetting theory. A more pronounced trend of lower percolation thickness for more reactive metals falls in line with reported correlations. Ex situ grazing incidence small angle X-ray scattering experiments were performed at various thicknesses to gain an insight into cluster and film morphology evolution. A novel approach to interpret the scattering data is used where simulated pair distance distributions of arbitrary shapes and arrangements can be fitted to experiments. Detailed approximations of cluster structures could be inferred and are discussed in view of the established parameters describing film growth behavior.
Collapse
|
20
|
Schwartzkopf M, Wöhnert SJ, Waclawek V, Carstens N, Rothkirch A, Rubeck J, Gensch M, Drewes J, Polonskyi O, Strunskus T, Hinz AM, Schaper SJ, Körstgens V, Müller-Buschbaum P, Faupel F, Roth SV. Real-time insight into nanostructure evolution during the rapid formation of ultra-thin gold layers on polymers. NANOSCALE HORIZONS 2021; 6:132-138. [PMID: 33290482 DOI: 10.1039/d0nh00538j] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/15/2023]
Abstract
Ultra-thin metal layers on polymer thin films attract tremendous research interest for advanced flexible optoelectronic applications, including organic photovoltaics, light emitting diodes and sensors. To realize the large-scale production of such metal-polymer hybrid materials, high rate sputter deposition is of particular interest. Here, we witness the birth of a metal-polymer hybrid material by quantifying in situ with unprecedented time-resolution of 0.5 ms the temporal evolution of interfacial morphology during the rapid formation of ultra-thin gold layers on thin polystyrene films. We monitor average non-equilibrium cluster geometries, transient interface morphologies and the effective near-surface gold diffusion. At 1 s sputter deposition, the polymer matrix has already been enriched with 1% gold and an intermixing layer has formed with a depth of over 3.5 nm. Furthermore, we experimentally observe unexpected changes in aspect ratios of ultra-small gold clusters growing in the vicinity of polymer chains. For the first time, this approach enables four-dimensional insights at atomic scales during the gold growth under non-equilibrium conditions.
Collapse
Affiliation(s)
- Matthias Schwartzkopf
- Photon Science, Deutsches Elektronen-Synchrotron (DESY), Notkestr. 85, D-22607 Hamburg, Germany.
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
Collapse
|
21
|
Bauer S, Rodrigues A, Horák L, Nergis B, Jin X, Schneider R, Gröger R, Baumbach T, Holý V. Time-Resolved Morphology and Kinetic Studies of Pulsed Laser Deposition-Grown Pt Layers on Sapphire at Different Growth Temperatures by in Situ Grazing Incidence Small-Angle X-ray Scattering. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2021; 37:734-749. [PMID: 33406840 DOI: 10.1021/acs.langmuir.0c02952] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/12/2023]
Abstract
Optimizing and monitoring the growth conditions of Pt films, often used as bottom electrodes in multiferroic material systems, represents a highly relevant issue that is of importance for controlling the crystalline quality and performance of ferroelectric oxides such as, e.g. LuFeO3. We performed a time-resolved monitoring of the growth and morphology of Pt films during pulsed laser deposition (PLD) in dependence on the grown film effective thickness and on the growth temperature Tg using in situ grazing incidence small-angle X-ray scattering (GISAXS). Through real-time analysis and modeling of GISAXS patterns, we could fully characterize the influence of Tg on the morphology and on the growth kinetics of the Pt layers. Consequently, critical and characteristic effective thicknesses for the transitions nucleation phase (I)/coalescence phase (II) and coalescence phase (II)/coarsening phase (III) could be determined. In combination with complementary microscopic imaging and chemical mapping via combined SEM/EDXS, we demonstrate the occurrence of a morphological progression in the Pt PLD-grown Pt films, changing from grains at room temperature to a 3D-island morphology at 300 °C, further to a hole-free structure at 500 °C, and finally to a channel structure for 700 and 900 °C. The film topography, as characterized by atomic force microscopy (AFM), favors the PLD growth of Pt layers at temperatures beyond 700 °C where the film is homogeneous, continuous, and hole-free with a flat and smooth surface. The double dependency of the percolation transition on the film effective thickness and on the growth temperature has been established by measuring the electrical conductivity.
Collapse
Affiliation(s)
- Sondes Bauer
- Institute for Photon Science and Synchrotron Radiation, Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1, D-76344 Eggenstein-Leopoldshafen, Germany
| | - Adriana Rodrigues
- Institute for Photon Science and Synchrotron Radiation, Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1, D-76344 Eggenstein-Leopoldshafen, Germany
| | - Lukáš Horák
- Department of Condensed Matter Physics, Charles University, Ke Karlovu 5, 121 16 Prague 2, Czech Republic
| | - Berkin Nergis
- Institute for Photon Science and Synchrotron Radiation, Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1, D-76344 Eggenstein-Leopoldshafen, Germany
| | - Xiaowei Jin
- Laboratory for Electron Microscopy, Karlsruhe Institute of Technology, Engesserstr. 7, D-76131 Karlsruhe, Germany
| | - Reinhard Schneider
- Laboratory for Electron Microscopy, Karlsruhe Institute of Technology, Engesserstr. 7, D-76131 Karlsruhe, Germany
| | - Roland Gröger
- Institute of Nanotechnology, Hermann-von-Helmholtz-Platz 1, D-76344 Eggenstein-Leopoldshafen, Germany
| | - Tilo Baumbach
- Institute for Photon Science and Synchrotron Radiation, Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1, D-76344 Eggenstein-Leopoldshafen, Germany
- Laboratory for Applications of Synchrotron Radiation, Kaiserstr. 12, D-76131 Karlsruhe, Germany
| | - Václav Holý
- Department of Condensed Matter Physics, Charles University, Ke Karlovu 5, 121 16 Prague 2, Czech Republic
- CEITEC, Masaryk University, Kotlářská 2, 611 37 Brno, Czech Republic
| |
Collapse
|
22
|
Colin J, Jamnig A, Furgeaud C, Michel A, Pliatsikas N, Sarakinos K, Abadias G. In Situ and Real-Time Nanoscale Monitoring of Ultra-Thin Metal Film Growth Using Optical and Electrical Diagnostic Tools. NANOMATERIALS (BASEL, SWITZERLAND) 2020; 10:E2225. [PMID: 33182409 PMCID: PMC7697846 DOI: 10.3390/nano10112225] [Citation(s) in RCA: 14] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 10/03/2020] [Revised: 10/30/2020] [Accepted: 11/03/2020] [Indexed: 01/08/2023]
Abstract
Continued downscaling of functional layers for key enabling devices has prompted the development of characterization tools to probe and dynamically control thin film formation stages and ensure the desired film morphology and functionalities in terms of, e.g., layer surface smoothness or electrical properties. In this work, we review the combined use of in situ and real-time optical (wafer curvature, spectroscopic ellipsometry) and electrical probes for gaining insights into the early growth stages of magnetron-sputter-deposited films. Data are reported for a large variety of metals characterized by different atomic mobilities and interface reactivities. For fcc noble-metal films (Ag, Cu, Pd) exhibiting a pronounced three-dimensional growth on weakly-interacting substrates (SiO2, amorphous carbon (a-C)), wafer curvature, spectroscopic ellipsometry, and resistivity techniques are shown to be complementary in studying the morphological evolution of discontinuous layers, and determining the percolation threshold and the onset of continuous film formation. The influence of growth kinetics (in terms of intrinsic atomic mobility, substrate temperature, deposition rate, deposition flux temporal profile) and the effect of deposited energy (through changes in working pressure or bias voltage) on the various morphological transition thicknesses is critically examined. For bcc transition metals, like Fe and Mo deposited on a-Si, in situ and real-time growth monitoring data exhibit transient features at a critical layer thickness of ~2 nm, which is a fingerprint of an interface-mediated crystalline-to-amorphous phase transition, while such behavior is not observed for Ta films that crystallize into their metastable tetragonal β-Ta allotropic phase. The potential of optical and electrical diagnostic tools is also explored to reveal complex interfacial reactions and their effect on growth of Pd films on a-Si or a-Ge interlayers. For all case studies presented in the article, in situ data are complemented with and benchmarked against ex situ structural and morphological analyses.
Collapse
Affiliation(s)
- Jonathan Colin
- Institut Pprime, UPR 3346, CNRS-Université de Poitiers-ENSMA, 11 Boulevard Marie et Pierre Curie, TSA 41123, CEDEX 9, 86073 Poitiers, France; (J.C.); (A.J.); (C.F.); (A.M.)
| | - Andreas Jamnig
- Institut Pprime, UPR 3346, CNRS-Université de Poitiers-ENSMA, 11 Boulevard Marie et Pierre Curie, TSA 41123, CEDEX 9, 86073 Poitiers, France; (J.C.); (A.J.); (C.F.); (A.M.)
- Nanoscale Engineering Division, Department of Physics, Chemistry and Biology, Linköping University, SE 581 83 Linköping, Sweden;
| | - Clarisse Furgeaud
- Institut Pprime, UPR 3346, CNRS-Université de Poitiers-ENSMA, 11 Boulevard Marie et Pierre Curie, TSA 41123, CEDEX 9, 86073 Poitiers, France; (J.C.); (A.J.); (C.F.); (A.M.)
| | - Anny Michel
- Institut Pprime, UPR 3346, CNRS-Université de Poitiers-ENSMA, 11 Boulevard Marie et Pierre Curie, TSA 41123, CEDEX 9, 86073 Poitiers, France; (J.C.); (A.J.); (C.F.); (A.M.)
| | - Nikolaos Pliatsikas
- Nanoscale Engineering Division, Department of Physics, Chemistry and Biology, Linköping University, SE 581 83 Linköping, Sweden;
| | - Kostas Sarakinos
- Nanoscale Engineering Division, Department of Physics, Chemistry and Biology, Linköping University, SE 581 83 Linköping, Sweden;
| | - Gregory Abadias
- Institut Pprime, UPR 3346, CNRS-Université de Poitiers-ENSMA, 11 Boulevard Marie et Pierre Curie, TSA 41123, CEDEX 9, 86073 Poitiers, France; (J.C.); (A.J.); (C.F.); (A.M.)
| |
Collapse
|
23
|
Chen W, Liang S, Löhrer FC, Schaper SJ, Li N, Cao W, Kreuzer LP, Liu H, Tang H, Körstgens V, Schwartzkopf M, Wang K, Sun XW, Roth SV, Müller-Buschbaum P. In situ Grazing-Incidence Small-Angle X-ray Scattering Observation of Gold Sputter Deposition on a PbS Quantum Dot Solid. ACS APPLIED MATERIALS & INTERFACES 2020; 12:46942-46952. [PMID: 32941012 DOI: 10.1021/acsami.0c12732] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/12/2023]
Abstract
For PbS quantum dot (QD)-based optoelectronic devices, gold is the most frequently used electrode material. In most device architectures, gold is in direct contact with the QD solid. To better understand the formation of the interface between gold and a close-packed QD layer at an early stage, in situ grazing-incidence small-angle X-ray scattering is used to observe the gold sputter deposition on a 1,2-ethanedithiol (EDT)-treated PbS QD solid. In the kinetics of gold layer growth, the forming and merging of small gold clusters (radius less than 1.6 nm) are observed at the early stages. The thereby formed medium gold clusters (radius between 1.9-2.4 nm) are influenced by the QDs' templating effect. Furthermore, simulations suggest that the medium gold clusters grow preferably along the QDs' boundaries rather than as a top coating of the QDs. When the thickness of the sputtered gold layer reaches 6.25 nm, larger gold clusters with a radius of 5.3 nm form. Simultaneously, a percolation layer with a thickness of 2.5 nm is established underneath the gold clusters. This fundamental understanding of the QD-gold interface formation will help to control the implementation of sputtered gold electrodes on close-packed QD solids in device manufacturing processes.
Collapse
Affiliation(s)
- Wei Chen
- Physik Department, Lehrstuhl für Funktionelle Materialien, Technische Universität München, James-Franck-Straße 1, 85748 Garching, Germany
| | - Suzhe Liang
- Physik Department, Lehrstuhl für Funktionelle Materialien, Technische Universität München, James-Franck-Straße 1, 85748 Garching, Germany
| | - Franziska C Löhrer
- Physik Department, Lehrstuhl für Funktionelle Materialien, Technische Universität München, James-Franck-Straße 1, 85748 Garching, Germany
| | - Simon J Schaper
- Physik Department, Lehrstuhl für Funktionelle Materialien, Technische Universität München, James-Franck-Straße 1, 85748 Garching, Germany
| | - Nian Li
- Physik Department, Lehrstuhl für Funktionelle Materialien, Technische Universität München, James-Franck-Straße 1, 85748 Garching, Germany
| | - Wei Cao
- Physik Department, Lehrstuhl für Funktionelle Materialien, Technische Universität München, James-Franck-Straße 1, 85748 Garching, Germany
| | - Lucas P Kreuzer
- Physik Department, Lehrstuhl für Funktionelle Materialien, Technische Universität München, James-Franck-Straße 1, 85748 Garching, Germany
| | - Haochen Liu
- Department of Electrical and Electronic Engineering, Southern University of Science and Technology, Xueyuan Blvd. 1088, 518055 Shenzhen, China
| | - Haodong Tang
- Department of Electrical and Electronic Engineering, Southern University of Science and Technology, Xueyuan Blvd. 1088, 518055 Shenzhen, China
| | - Volker Körstgens
- Physik Department, Lehrstuhl für Funktionelle Materialien, Technische Universität München, James-Franck-Straße 1, 85748 Garching, Germany
| | | | - Kai Wang
- Department of Electrical and Electronic Engineering, Southern University of Science and Technology, Xueyuan Blvd. 1088, 518055 Shenzhen, China
| | - Xiao Wei Sun
- Department of Electrical and Electronic Engineering, Southern University of Science and Technology, Xueyuan Blvd. 1088, 518055 Shenzhen, China
| | - Stephan V Roth
- Deutsches Elektronen-Synchrotron DESY, Notkestraße 85, 22607 Hamburg, Germany
- Department of Fibre and Polymer Technology, KTH Royal Institute of Technology, Teknikringen 56-58, SE-100 44 Stockholm, Sweden
| | - Peter Müller-Buschbaum
- Physik Department, Lehrstuhl für Funktionelle Materialien, Technische Universität München, James-Franck-Straße 1, 85748 Garching, Germany
- Heinz Maier-Leibnitz Zentrum (MLZ), Technische Universität München, Lichtenbergstraße 1, 85748 Garching, Germany
| |
Collapse
|
24
|
Revealing structural evolution occurring from photo-initiated polymer network formation. Commun Chem 2020; 3:88. [PMID: 36703468 PMCID: PMC9814663 DOI: 10.1038/s42004-020-0335-9] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/14/2020] [Accepted: 06/17/2020] [Indexed: 01/29/2023] Open
Abstract
Photopolymerization is a key enabling technology offering spatial and temporal control to allow for future functional materials to be made to meet societal needs. However, gaining access to robust experimental techniques to describe the evolution of nanoscale morphology in photo-initiated polymeric systems has proven so far to be a challenging task. Here, we show that these physical transformations can be monitored and quantified at the nanoscale in situ and in real-time. It is demonstrated that the initial structural features of the liquid precursors significantly affect the final morphology and the physical properties of the resulting solid via the occurrence of local heterogeneities in the molecular mobility during the curing transformation. We have made visible how local physical arrestings in the liquid, associated with both cross-linking and vitrification, determine the length scale of the local heterogeneities forming upon curing, found to be in the 10-200 nm range.
Collapse
|
25
|
Deng N, Chen J, Peng LM, Liu Y, Chen Y, Lai T, Ding WJ, Zhu H. Effects of Amorphous and Nanocrystalline Structures on Hydrogen-Induced Optical Performance of Modulated Mg-Gd Films with Various Composition Fluctuations. ACS APPLIED MATERIALS & INTERFACES 2020; 12:29605-29613. [PMID: 32510191 DOI: 10.1021/acsami.0c04694] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
Nanomodification and amorphization are vital for improving the hydrogenation properties of magnesium (Mg)-based alloys. However, comparisons of their positive effects have been rarely presented because their usual fabrication process of annealing is hard to control. In this study, after tuning the composition fluctuation range, self-assembled well-ordered multilayer Mg0.7Gd0.3 films with an excessive amount of nanosized crystals were fabricated by deviating substrates to the edge of the sample stage, while relatively low crystallinity was gained at the center of the sample stage with a small composition fluctuation. It was demonstrated that the hydrogen diffusion rate in the sample deposited at the center with excessive amorphous regions was higher than that of the film fabricated at the edge with excessive nanocrystals regions. Besides, optical conversion ranges were monitored before and after the hydrogen absorption process. Films with large composition fluctuation possessed a high optical reflectance conversion range because the interference effects occurring inside improved their initial reflectance. However, films with small composition fluctuation inside gained a large transmittance conversion range due to their small nanostructured region.
Collapse
Affiliation(s)
- Nanxiang Deng
- National Engineering Research Center of Light Alloy Net Forming, State Key Laboratory of Metal Matrix Composites, Shanghai Jiao Tong University, Shanghai 200240, P. R. China
| | - Juan Chen
- National Engineering Research Center of Light Alloy Net Forming, State Key Laboratory of Metal Matrix Composites, Shanghai Jiao Tong University, Shanghai 200240, P. R. China
- Center of Hydrogen Science, Shanghai Jiao Tong University, Shanghai 200240, P. R. China
- Materials Genome Initiative Center, Shanghai Jiao Tong University, Shanghai 200240, P. R. China
| | - Li-Ming Peng
- National Engineering Research Center of Light Alloy Net Forming, State Key Laboratory of Metal Matrix Composites, Shanghai Jiao Tong University, Shanghai 200240, P. R. China
- Center of Hydrogen Science, Shanghai Jiao Tong University, Shanghai 200240, P. R. China
- Materials Genome Initiative Center, Shanghai Jiao Tong University, Shanghai 200240, P. R. China
| | - Yue Liu
- National Engineering Research Center of Light Alloy Net Forming, State Key Laboratory of Metal Matrix Composites, Shanghai Jiao Tong University, Shanghai 200240, P. R. China
| | - Yan Chen
- National Engineering Research Center of Light Alloy Net Forming, State Key Laboratory of Metal Matrix Composites, Shanghai Jiao Tong University, Shanghai 200240, P. R. China
| | - Tianxing Lai
- School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, P. R. China
| | - Wen-Jiang Ding
- National Engineering Research Center of Light Alloy Net Forming, State Key Laboratory of Metal Matrix Composites, Shanghai Jiao Tong University, Shanghai 200240, P. R. China
- Center of Hydrogen Science, Shanghai Jiao Tong University, Shanghai 200240, P. R. China
| | - Hong Zhu
- National Engineering Research Center of Light Alloy Net Forming, State Key Laboratory of Metal Matrix Composites, Shanghai Jiao Tong University, Shanghai 200240, P. R. China
- University of Michigan-Shanghai Jiao Tong University Joint Institute, Shanghai Jiao Tong University, Shanghai 200240, P. R. China
- Materials Genome Initiative Center, Shanghai Jiao Tong University, Shanghai 200240, P. R. China
| |
Collapse
|
26
|
Moehl GE, Bartlett PN, Hector AL. Using GISAXS to Detect Correlations between the Locations of Gold Particles Electrodeposited from an Aqueous Solution. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2020; 36:4432-4438. [PMID: 32241113 DOI: 10.1021/acs.langmuir.9b03400] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
Electrodeposition is a powerful tool for the bottom-up fabrication of novel electronic devices. This necessitates a complete understanding of the deposition process beyond the classical description using current transients. Recent calculations predict deviations within the spatial arrangement of electrodeposited particles, away from random nucleation. The spatial arrangement of Au particles generated through aqueous electrodeposition on a nontemplated substrate is investigated by grazing incidence small-angle X-ray scattering (GISAXS). We show that GISAXS is able to reveal spatial correlations within deposited particles that are not easily detectable by microscopy.
Collapse
Affiliation(s)
- Gilles E Moehl
- School of Chemistry, University of Southampton, Southampton SO17 1BJ, U.K
| | - Philip N Bartlett
- School of Chemistry, University of Southampton, Southampton SO17 1BJ, U.K
| | - Andrew L Hector
- School of Chemistry, University of Southampton, Southampton SO17 1BJ, U.K
| |
Collapse
|
27
|
Pyun SB, Song JE, Kim JY, Cho EC. Hydrochromic Smart Windows to Remove Harmful Substances by Mimicking Medieval European Stained Glasses. ACS APPLIED MATERIALS & INTERFACES 2020; 12:16937-16945. [PMID: 32178520 DOI: 10.1021/acsami.0c01719] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
Medieval European stained glass windows are known to display various splendid colors and remove harmful airborne substances. At present, the functions of medieval stained glass windows are imperative, from the environment, health, and energy perspectives, to develop multi-functional windows that report/control environmental conditions and remove harmful substances by utilizing visible-near-infrared light sources. Here, we suggest a strategy to mimic medieval European stained glasses for devising plasmonic-based multi-functional smart stained glass windows. The stained glass windows are prepared from the deposition of gold nanoparticles on a glass that is preliminarily coated with a responsive colloidal nanosheet. The temperature responsiveness of the nanosheet enables the effective control the gold nanoparticle density of the stained glasses. Therefore, the windows can display blue, violet, and cranberry colors. The colors become iridescent by introducing a photonic crystal monolayer. The stained glass windows are hydrochromic: they switch the colors (blue ↔ cranberry) and modulate light transmittance depending on humidity conditions. Moreover, they can remove formaldehyde under the illumination of a low-power indoor light. These functions provide a new platform for the futuristic smart windows that clean indoor air for the human health and save energy.
Collapse
Affiliation(s)
- Seung Beom Pyun
- Department of Chemical Engineering, Hanyang University, Seoul 04763, Republic of Korea
| | - Ji Eun Song
- Department of Chemical Engineering, Hanyang University, Seoul 04763, Republic of Korea
| | - Jung Yeon Kim
- Department of Chemical Engineering, Hanyang University, Seoul 04763, Republic of Korea
| | - Eun Chul Cho
- Department of Chemical Engineering, Hanyang University, Seoul 04763, Republic of Korea
| |
Collapse
|
28
|
On the Effects of Diluted and Mixed Ionic Liquids as Liquid Substrates for the Sputter Synthesis of Nanoparticles. NANOMATERIALS 2020; 10:nano10030525. [PMID: 32183305 PMCID: PMC7153607 DOI: 10.3390/nano10030525] [Citation(s) in RCA: 14] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 02/20/2020] [Revised: 03/09/2020] [Accepted: 03/12/2020] [Indexed: 02/01/2023]
Abstract
The synthesis of nanoparticles by combinatorial sputtering in ionic liquids is a versatile approach for discovering new materials. Whereas the influence on nanoparticle formation of different pure ionic liquids has been addressed, the influence of (I) dilution of ionic liquid with solvents and (II) different mixtures of ionic liquids is less known. Therefore, mixtures of the ionic liquid [Bmim][(Tf)2N] with the organic solvent anisole and other ionic liquids ([Bmim][(Pf)2N], [BmPyr][(Tf)2N]) were used as liquid substrates for the sputter synthesis of nanoparticles, in order to investigate the influence of these mixtures on the size of the nanoparticles. First, mixtures of anisole with a suspension of sputtered Ag nanoparticles in [Bmim][(Tf)2N] were prepared in different volumetric steps to investigate if the stabilization of the NPs by the ionic liquid could be reduced by the solvent. However, a continuous reduction in nanoparticle size and amount with increasing anisole volume was observed. Second, Ag, Au and Cu were sputtered on ionic liquid mixtures. Ag nanoparticles in [Bmim][(Tf)2N]/[Bmim][(Pf)2N] mixtures showed a decrease in size with the increasing volumetric fraction of [Bmim][(Tf)2N], whereas all nanoparticles obtained from [Bmim][(Tf)2N]/[BmPyr][(Tf)2N] mixtures showed increasing size and broadening of the size distribution. Maximum sizes of sputtered Ag and Au NPs were reached in mixtures of [Bmim][(Tf)2N] with 20 vol.% and 40 vol.% [BmPyr][(Tf)2N]. The results indicate that ionic liquid mixtures with different portions of cations and anions have the capability of influencing the ionic liquid stabilization characteristics with respect to, e.g., nanoparticle size and size distribution.
Collapse
|
29
|
Pospelov G, Van Herck W, Burle J, Carmona Loaiza JM, Durniak C, Fisher JM, Ganeva M, Yurov D, Wuttke J. BornAgain: software for simulating and fitting grazing-incidence small-angle scattering. J Appl Crystallogr 2020; 53:262-276. [PMID: 32047414 PMCID: PMC6998781 DOI: 10.1107/s1600576719016789] [Citation(s) in RCA: 42] [Impact Index Per Article: 10.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/08/2019] [Accepted: 12/15/2019] [Indexed: 01/24/2023] Open
Abstract
BornAgain is a free and open-source multi-platform software framework for simulating and fitting X-ray and neutron reflectometry, off-specular scattering, and grazing-incidence small-angle scattering (GISAS). This paper concentrates on GISAS. Support for reflectometry and off-specular scattering has been added more recently, is still under intense development and will be described in a later publication. BornAgain supports neutron polarization and magnetic scattering. Users can define sample and instrument models through Python scripting. A large subset of the functionality is also available through a graphical user interface. This paper describes the software in terms of the realized non-functional and functional requirements. The web site https://www.bornagainproject.org/ provides further documentation.
Collapse
Affiliation(s)
- Gennady Pospelov
- Jülich Centre for Neutron Science (JCNS) at Heinz Maier-Leibnitz Zentrum (MLZ), Forschungszentrum Jülich GmbH, Lichtenbergstrasse 1, Garching, 85748, Germany
| | - Walter Van Herck
- Jülich Centre for Neutron Science (JCNS) at Heinz Maier-Leibnitz Zentrum (MLZ), Forschungszentrum Jülich GmbH, Lichtenbergstrasse 1, Garching, 85748, Germany
| | - Jan Burle
- Jülich Centre for Neutron Science (JCNS) at Heinz Maier-Leibnitz Zentrum (MLZ), Forschungszentrum Jülich GmbH, Lichtenbergstrasse 1, Garching, 85748, Germany
| | - Juan M. Carmona Loaiza
- Jülich Centre for Neutron Science (JCNS) at Heinz Maier-Leibnitz Zentrum (MLZ), Forschungszentrum Jülich GmbH, Lichtenbergstrasse 1, Garching, 85748, Germany
| | - Céline Durniak
- Jülich Centre for Neutron Science (JCNS) at Heinz Maier-Leibnitz Zentrum (MLZ), Forschungszentrum Jülich GmbH, Lichtenbergstrasse 1, Garching, 85748, Germany
| | - Jonathan M. Fisher
- Jülich Centre for Neutron Science (JCNS) at Heinz Maier-Leibnitz Zentrum (MLZ), Forschungszentrum Jülich GmbH, Lichtenbergstrasse 1, Garching, 85748, Germany
| | - Marina Ganeva
- Jülich Centre for Neutron Science (JCNS) at Heinz Maier-Leibnitz Zentrum (MLZ), Forschungszentrum Jülich GmbH, Lichtenbergstrasse 1, Garching, 85748, Germany
| | - Dmitry Yurov
- Jülich Centre for Neutron Science (JCNS) at Heinz Maier-Leibnitz Zentrum (MLZ), Forschungszentrum Jülich GmbH, Lichtenbergstrasse 1, Garching, 85748, Germany
| | - Joachim Wuttke
- Jülich Centre for Neutron Science (JCNS) at Heinz Maier-Leibnitz Zentrum (MLZ), Forschungszentrum Jülich GmbH, Lichtenbergstrasse 1, Garching, 85748, Germany
| |
Collapse
|
30
|
Löhrer FC, Körstgens V, Semino G, Schwartzkopf M, Hinz A, Polonskyi O, Strunskus T, Faupel F, Roth SV, Müller-Buschbaum P. Following in Situ the Deposition of Gold Electrodes on Low Band Gap Polymer Films. ACS APPLIED MATERIALS & INTERFACES 2020; 12:1132-1141. [PMID: 31829550 DOI: 10.1021/acsami.9b17590] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/17/2023]
Abstract
Metal top electrodes such as gold are widely used in organic solar cells. The active layer can be optimized by modifications of the polymer band gap via side-chain engineering, and low band gap polymers based on benzodithiophene units such as PTB7 and PTB7-Th are successfully used. The growth of gold contacts on PTB7 and PTB7-Th films is investigated with in situ grazing incidence small-angle X-ray scattering (GISAXS) and grazing incidence wide-angle X-ray scattering (GIWAXS) during the sputter deposition of gold. From GIWAXS, the crystal structure of the gold film is determined. Independent of the type of side chain, gold crystals form in the very early stages and improve in quality during the sputter deposition until the late stages. From GISAXS, the nanoscale structure is determined. Differences in terms of gold cluster size and growth phase limits for the two polymers are caused by the side-chain modification and result in a different surface coverage in the early phases. The changes in the diffusion and coalescence behavior of the forming gold nanoparticles cause differences in the morphology of the gold contact in the fully percolated regime, which is attributed to the different amount of thiophene rings of the side chains acting as nucleation sites.
Collapse
Affiliation(s)
- Franziska C Löhrer
- Physik-Department, Lehrstuhl für Funktionelle Materialien , Technische Universität München , James-Franck-Str. 1 , 85748 Garching , Germany
| | - Volker Körstgens
- Physik-Department, Lehrstuhl für Funktionelle Materialien , Technische Universität München , James-Franck-Str. 1 , 85748 Garching , Germany
| | - Gabriele Semino
- Physik-Department, Lehrstuhl für Funktionelle Materialien , Technische Universität München , James-Franck-Str. 1 , 85748 Garching , Germany
| | | | - Alexander Hinz
- Institut für Materialwissenschaft, Lehrstuhl für Materialverbunde , Christian-Albrechts-Universität zu Kiel , Kaiserstraße 2 , 24143 Kiel , Germany
| | - Oleksandr Polonskyi
- Institut für Materialwissenschaft, Lehrstuhl für Materialverbunde , Christian-Albrechts-Universität zu Kiel , Kaiserstraße 2 , 24143 Kiel , Germany
| | - Thomas Strunskus
- Institut für Materialwissenschaft, Lehrstuhl für Materialverbunde , Christian-Albrechts-Universität zu Kiel , Kaiserstraße 2 , 24143 Kiel , Germany
| | - Franz Faupel
- Institut für Materialwissenschaft, Lehrstuhl für Materialverbunde , Christian-Albrechts-Universität zu Kiel , Kaiserstraße 2 , 24143 Kiel , Germany
| | - Stephan V Roth
- Deutsches Elektronen-Synchrotron (DESY) , Notkestrasse 85 , 22607 Hamburg , Germany
- Department of Fiber and Polymer Technology , KTH Royal Institute of Technology , Teknikringen 56-58 , 10044 Stockholm , Sweden
| | - Peter Müller-Buschbaum
- Physik-Department, Lehrstuhl für Funktionelle Materialien , Technische Universität München , James-Franck-Str. 1 , 85748 Garching , Germany
- Heinz Maier-Leibnitz-Zentrum , Lichtenbergstr. 1 , 85748 Garching , Germany
| |
Collapse
|
31
|
Meischein M, Garzón-Manjón A, Frohn T, Meyer H, Salomon S, Scheu C, Ludwig A. Combinatorial Synthesis of Binary Nanoparticles in Ionic Liquids by Cosputtering and Mixing of Elemental Nanoparticles. ACS COMBINATORIAL SCIENCE 2019; 21:743-752. [PMID: 31614084 DOI: 10.1021/acscombsci.9b00140] [Citation(s) in RCA: 12] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/07/2023]
Abstract
Binary alloy nanoparticles were fabricated by two combinatorial methods: (I) cosputtering from elemental targets into the ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [Bmim][(Tf)2N] and (II) by mixing elemental nanoparticles after sputtering them separately into [Bmim][(Tf)2N]. Both methods lead to the formation of Au-Cu nanoparticles (2.3 nm for cosputtered, 3.6 nm for mixed), however with different resulting compositions: cosputtered nanoparticles show a composition range of Au80-90Cu20-10; mixing of Au- and Cu-loaded ionic liquids leads to the formation of Au75Cu25 nanoparticles. Annealing the binary nanoparticles at 100 °C shows that the mixed nanoparticles grow to sizes of 4.1 nm, whereas the cosputtered nanoparticles grow only to 3 nm.
Collapse
Affiliation(s)
- Michael Meischein
- Chair for Materials Discovery and Interfaces, Institute for Materials, Faculty of Mechanical Engineering, Ruhr University Bochum, Universitätsstr. 150, D-44780 Bochum, Germany
| | - Alba Garzón-Manjón
- Max-Planck-Institut für Eisenforschung GmbH, Max-Planck-Straße 1, D-40237 Düsseldorf, Germany
| | - Thomas Frohn
- Chair for Materials Discovery and Interfaces, Institute for Materials, Faculty of Mechanical Engineering, Ruhr University Bochum, Universitätsstr. 150, D-44780 Bochum, Germany
| | - Hajo Meyer
- Chair for Materials Discovery and Interfaces, Institute for Materials, Faculty of Mechanical Engineering, Ruhr University Bochum, Universitätsstr. 150, D-44780 Bochum, Germany
| | - Steffen Salomon
- Chair for Materials Discovery and Interfaces, Institute for Materials, Faculty of Mechanical Engineering, Ruhr University Bochum, Universitätsstr. 150, D-44780 Bochum, Germany
| | - Christina Scheu
- Max-Planck-Institut für Eisenforschung GmbH, Max-Planck-Straße 1, D-40237 Düsseldorf, Germany
| | - Alfred Ludwig
- Chair for Materials Discovery and Interfaces, Institute for Materials, Faculty of Mechanical Engineering, Ruhr University Bochum, Universitätsstr. 150, D-44780 Bochum, Germany
| |
Collapse
|
32
|
Chen D, Wang T, Song G, Du Y, Lv J, Zhang X, Li Y, Zhang L, Hu J, Fu Y, Jordan R. Dynamic Tunable Color Display Based on Metal-Insulator-Metal Resonator with Polymer Brush Insulator Layer as Signal Transducer. ACS APPLIED MATERIALS & INTERFACES 2019; 11:41668-41675. [PMID: 31623430 DOI: 10.1021/acsami.9b14125] [Citation(s) in RCA: 20] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
Dynamic color-changing nanomaterials have been widely investigated for applications in fields like optical sensors, wearable activity monitors, smart electronic devices, and anticounterfeiting materials due to the excellent ability to change their optical properties with external variation. Here, a simple metal-insulator-metal (MIM) trilayer Fabry-Perot resonance cavity with a poly(N-isopropylacrylamide) (PNIPAm) brush layer as a responsive element is reported as a thermal-induced colorimetric response platform. The dynamic changes of conformation and physical properties of PNIPAm brush layer in response to external signals give rise to a significant color change of the MIM Fabry-Perot resonance cavity. This MIM Fabry-Perot resonance cavity shows the advantages of dynamic color change, rapid response, good repeatability, and simple construction. Additionally, the as-prepared MIM cavity shows great potential in various applications such as color printing, multicolor indicator, and information anticounterfeiting.
Collapse
Affiliation(s)
- Dan Chen
- College of Sciences , Northeastern University , Shenyang 110819 , P. R. China
| | - Tieqiang Wang
- College of Sciences , Northeastern University , Shenyang 110819 , P. R. China
- Chair of Macromolecular Chemistry, School of Science , Technische Universität Dresden , Dresden 01069 , Germany
| | - Guoshuai Song
- College of Sciences , Northeastern University , Shenyang 110819 , P. R. China
| | - Yunhao Du
- Chair of Macromolecular Chemistry, School of Science , Technische Universität Dresden , Dresden 01069 , Germany
| | - Jinqiu Lv
- College of Sciences , Northeastern University , Shenyang 110819 , P. R. China
| | - Xuemin Zhang
- College of Sciences , Northeastern University , Shenyang 110819 , P. R. China
| | - Yunong Li
- College of Sciences , Northeastern University , Shenyang 110819 , P. R. China
| | - Liying Zhang
- College of Sciences , Northeastern University , Shenyang 110819 , P. R. China
| | - Jianshe Hu
- College of Sciences , Northeastern University , Shenyang 110819 , P. R. China
| | - Yu Fu
- College of Sciences , Northeastern University , Shenyang 110819 , P. R. China
| | - Rainer Jordan
- Chair of Macromolecular Chemistry, School of Science , Technische Universität Dresden , Dresden 01069 , Germany
| |
Collapse
|
33
|
Chi H, Xu Z, Duan X, Yang J, Wang F, Li Z. High-Performance Colorimetric Room-Temperature NO 2 Sensing Using Spin-Coated Graphene/Polyelectrolyte Reflecting Film. ACS APPLIED MATERIALS & INTERFACES 2019; 11:32390-32397. [PMID: 31390858 DOI: 10.1021/acsami.9b09901] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
Nitrogen dioxide (NO2) is a colorless, flammable, and dangerous gas even at very low concentrations. To date, quantitative analysis of NO2 concentrations have been made using conventional techniques (e.g., electrochemical method). In light of the energy and time consumption involved in such applications, efforts have been made to develop new detection methods that are more sensitive and sustainable. At this point, structural color-based sensing shows great advantages because of its sensitive, visualized, and reproducible response. In this study, graphene oxide/polystyrene sulfonate (GO/PSS) optical films were designed and prepared to evaluate the potential usage for the effective detection of NO2. The uniform GO/PSS thin films were fabricated by the spin-coating-assisted layer-by-layer assembly method. The resulting colorful films exhibited ultrafast response, obvious optical shifts, and good reversibility within the visible range toward NO2. The concentration-dependent NO2 sensing characteristics and selectivity were investigated as well. The dynamic study showed that the absorption/desorption time was 200/200 ms and the detection limit was 1.0 ppm at room temperature. The sensing mechanism was investigated and verified by computer simulations. Such ultrasensitive and colorimetric properties of GO/PSS films may enable many potential applications such as disposable sensors for health and environmental monitoring.
Collapse
Affiliation(s)
- Hong Chi
- Shandong Provincial Key Laboratory of Molecular Engineering, School of Chemistry and Pharmaceutical Engineering , Qilu University of Technology (Shandong Academy of Sciences) , Jinan 250353 , China
| | - Zhen Xu
- Shandong Provincial Key Laboratory of Molecular Engineering, School of Chemistry and Pharmaceutical Engineering , Qilu University of Technology (Shandong Academy of Sciences) , Jinan 250353 , China
| | - Xiaosen Duan
- Shandong Provincial Key Laboratory of Molecular Engineering, School of Chemistry and Pharmaceutical Engineering , Qilu University of Technology (Shandong Academy of Sciences) , Jinan 250353 , China
| | - Jing Yang
- Institute of Materials Research and Engineering, A*STAR (Agency for Science, Technology and Research) , 2 Fusionopolis Way, Innovis, #08-03 , Singapore 138634 , Singapore
| | - Fuke Wang
- Institute of Materials Research and Engineering, A*STAR (Agency for Science, Technology and Research) , 2 Fusionopolis Way, Innovis, #08-03 , Singapore 138634 , Singapore
| | - Zibiao Li
- Institute of Materials Research and Engineering, A*STAR (Agency for Science, Technology and Research) , 2 Fusionopolis Way, Innovis, #08-03 , Singapore 138634 , Singapore
| |
Collapse
|
34
|
Pandit P, Schwartzkopf M, Rothkirch A, Roth SV, Bernstorff S, Gupta A. Structure-Function Correlations in Sputter Deposited Gold/Fluorocarbon Multilayers for Tuning Optical Response. NANOMATERIALS (BASEL, SWITZERLAND) 2019; 9:E1249. [PMID: 31484334 PMCID: PMC6780487 DOI: 10.3390/nano9091249] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 06/26/2019] [Revised: 08/22/2019] [Accepted: 08/26/2019] [Indexed: 11/16/2022]
Abstract
A new strategy to nanoengineer gold/fluorocarbon multilayer (ML) nanostructures is reported. We have investigated the morphological changes occurring at the metal-polymer interface in ML structures with varying volume fraction of gold (Au) and the kinetic growth aspect of the microscale properties of nano-sized Au in plasma polymer fluorocarbon (PPFC). Investigations were carried out at various temperatures and annealing times by means of grazing incidence small-angle and wide-angle X-ray scattering (GISAXS and GIWAXS). We have fabricated a series of MLs with varying volume fraction (0.12, 0.27, 0.38) of Au and bilayer periodicity in ML structure. They show an interesting granular structure consisting of nearly spherical nanoparticles within the polymer layer. The nanoparticle (NP) morphology changes due to the collective effects of NPs diffusion within ensembles in the in-plane vicinity and interlayer with increasing temperature. The in-plane NPs size distinctly increases with increasing temperature. The NPs become more spherical, thus reducing the surface energy. Linear growth of NPs with temperature and time shows diffusion-controlled growth of NPs in the ML structure. The structural stability of the multilayer is controlled by the volume ratio of the metal in polymer. At room temperature, UV-Vis shows a blue shift of the plasmon peak from 560 nm in ML Au/PTFE_1 to 437 nm in Au/PTFE_3. We have identified the fabrication and postdeposition annealing conditions to limit the local surface plasmon resonance (LSPR) shift from Δ λ L S P R = 180 nm (Au/PTFE_1) to Δ λ L S P R = 67 nm (Au/PTFE_3 ML)) and their optical response over a wide visible wavelength range. A variation in the dielectric constant of the polymer in presence of varying Au inclusion is found to be a possible factor affecting the LSPR frequency. Our findings may provide insights in nanoengineering of ML structure that can be useful to systematically control the growth of NPs in polymer matrix.
Collapse
Affiliation(s)
- Pallavi Pandit
- Deutsches Elektronen-Synchrotron (DESY), Notkestraße 85, D-22607 Hamburg, Germany.
| | | | - André Rothkirch
- Deutsches Elektronen-Synchrotron (DESY), Notkestraße 85, D-22607 Hamburg, Germany
| | - Stephan V Roth
- Deutsches Elektronen-Synchrotron (DESY), Notkestraße 85, D-22607 Hamburg, Germany
- KTH Royal Institute of Technology, Department of Fibre and Polymer Technology, Teknikringen 56-58, SE-100 44 Stockholm, Sweden
| | - Sigrid Bernstorff
- Elettra-Sincrotrone Trieste, SS 14, Km 163.5, I-34149 Basovizza, Trieste, Italy
| | - Ajay Gupta
- Center for Spintronic Materials, Amity University, UP Noida 201 313, India.
| |
Collapse
|
35
|
Gensch M, Schwartzkopf M, Ohm W, Brett CJ, Pandit P, Vayalil SK, Bießmann L, Kreuzer LP, Drewes J, Polonskyi O, Strunskus T, Faupel F, Stierle A, Müller-Buschbaum P, Roth SV. Correlating Nanostructure, Optical and Electronic Properties of Nanogranular Silver Layers during Polymer-Template-Assisted Sputter Deposition. ACS APPLIED MATERIALS & INTERFACES 2019; 11:29416-29426. [PMID: 31313904 DOI: 10.1021/acsami.9b08594] [Citation(s) in RCA: 20] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/17/2023]
Abstract
Tailoring the optical and electronic properties of nanostructured polymer-metal composites demonstrates great potential for efficient fabrication of modern organic optical and electronic devices such as flexible sensors, transistors, diodes, or photovoltaics. Self-assembled polymer-metal nanocomposites offer an excellent perspective for creating hierarchical nanostructures on macroscopic scales by simple bottom-up processes. We investigate the growth processes of nanogranular silver (Ag) layers on diblock copolymer thin film templates during sputter deposition. The Ag growth is strongly driven by self-assembly and selective wetting on the lamella structure of polystyrene-block-poly(methyl methacrylate). We correlate the emerging nanoscale morphologies with collective optical and electronic properties and quantify the difference in Ag growth on the corresponding homopolymer thin films. Thus, we are able to determine the influence of the respective polymer template and observe substrate effects on the Ag cluster percolation threshold, which affects the insulator-to-metal transition (IMT). Optical spectroscopy in the UV-vis regime reveals localized surface plasmon resonance for the metal-polymer composite. Their maximum absorption is observed around the IMT due to the subsequent long-range electron conduction in percolated nanogranular Ag layers. Using X-ray photoelectron spectroscopy and Fourier-transform infrared spectroscopy, we identify the oxidation of Ag at the acrylate side chains as an essential influencing factor driving the selective wetting behavior in the early growth stages. The results of polymer-templated cluster growth are corroborated by atomic force microscopy and field emission scanning electron microscopy.
Collapse
Affiliation(s)
- Marc Gensch
- Deutsches Elektronen-Synchrotron (DESY) , Notkestr. 85 , D-22607 Hamburg , Germany
- Lehrstuhl für Funktionelle Materialien, Physik-Department , Technische Universität München , James-Franck-Str. 1 , D-85748 Garching , Germany
| | | | - Wiebke Ohm
- Deutsches Elektronen-Synchrotron (DESY) , Notkestr. 85 , D-22607 Hamburg , Germany
| | - Calvin J Brett
- Deutsches Elektronen-Synchrotron (DESY) , Notkestr. 85 , D-22607 Hamburg , Germany
- KTH Royal Institute of Technology , Teknikringen 56-58 , SE-100 44 Stockholm , Sweden
| | - Pallavi Pandit
- Deutsches Elektronen-Synchrotron (DESY) , Notkestr. 85 , D-22607 Hamburg , Germany
| | | | - Lorenz Bießmann
- Lehrstuhl für Funktionelle Materialien, Physik-Department , Technische Universität München , James-Franck-Str. 1 , D-85748 Garching , Germany
| | - Lucas P Kreuzer
- Lehrstuhl für Funktionelle Materialien, Physik-Department , Technische Universität München , James-Franck-Str. 1 , D-85748 Garching , Germany
| | - Jonas Drewes
- Lehrstuhl für Materialverbunde, Institut für Materialwissenschaft , Christian Albrechts-Universität zu Kiel , Kaiserstr. 2 , D-24143 Kiel , Germany
| | - Oleksandr Polonskyi
- Lehrstuhl für Materialverbunde, Institut für Materialwissenschaft , Christian Albrechts-Universität zu Kiel , Kaiserstr. 2 , D-24143 Kiel , Germany
| | - Thomas Strunskus
- Lehrstuhl für Materialverbunde, Institut für Materialwissenschaft , Christian Albrechts-Universität zu Kiel , Kaiserstr. 2 , D-24143 Kiel , Germany
| | - Franz Faupel
- Lehrstuhl für Materialverbunde, Institut für Materialwissenschaft , Christian Albrechts-Universität zu Kiel , Kaiserstr. 2 , D-24143 Kiel , Germany
| | - Andreas Stierle
- Deutsches Elektronen-Synchrotron (DESY) , Notkestr. 85 , D-22607 Hamburg , Germany
- Physics Department , University of Hamburg , Luruper Chaussee 149 , D-22761 Hamburg , Germany
| | - Peter Müller-Buschbaum
- Lehrstuhl für Funktionelle Materialien, Physik-Department , Technische Universität München , James-Franck-Str. 1 , D-85748 Garching , Germany
- Heinz Maier-Leibniz Zentrum (MLZ) , Technische Universität München , Lichtenbergstraße 1 , D-85748 Garching , Germany
| | - Stephan V Roth
- Deutsches Elektronen-Synchrotron (DESY) , Notkestr. 85 , D-22607 Hamburg , Germany
- KTH Royal Institute of Technology , Teknikringen 56-58 , SE-100 44 Stockholm , Sweden
| |
Collapse
|
36
|
|
37
|
Yin G, Bai S, Tu X, Li Z, Zhang Y, Wang W, Lu J, He D. Highly Sensitive and Stable SERS Substrate Fabricated by Co-sputtering and Atomic Layer Deposition. NANOSCALE RESEARCH LETTERS 2019; 14:168. [PMID: 31104182 PMCID: PMC6525682 DOI: 10.1186/s11671-019-2997-8] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/04/2019] [Accepted: 04/29/2019] [Indexed: 05/31/2023]
Abstract
In this study, we develop a facile method to fabricate highly sensitive and stable surface-enhanced Raman scattering (SERS) substrate, which is realized by combining co-sputtering with atomic layer deposition technology. To accomplish the SERS substrate preparation, we firstly utilized co-sputtering silver and aluminum on glass slides to form uniform discontinuous Ag film by removing Al later, which acted as SERS active moiety and presented high sensitivity in glycerin detection. After coating an ultrathin TiO2 layer via atomic layer deposition (ALD), the samples could further enhance the Raman signal due to the chemical effect as well as the long-range effect of the enhanced electromagnetic field generated by the encapsulated Ag nanoparticles (NPs). Besides, the coated sample could maintain the significant enhancement in air condition for more than 30 days. The high stability is induced by TiO2 layer, which efficiently prevents Ag NPs from surface oxidation. This highly sensitive and stable SERS substrate might highlight the application of interface state investigation for exploring novel liquid lubricating materials.
Collapse
Affiliation(s)
- Guilin Yin
- School of Material Science and Engineering, Shanghai Jiao Tong University, No. 800 Dongchuan Road, Shanghai, 200240 People’s Republic of China
- National Engineering Research Center for Nanotechnology, No. 28 East Jiangchuan Road, Shanghai, 200241 People’s Republic of China
| | - Shiheng Bai
- School of Material Science and Engineering, Shanghai Jiao Tong University, No. 800 Dongchuan Road, Shanghai, 200240 People’s Republic of China
- National Engineering Research Center for Nanotechnology, No. 28 East Jiangchuan Road, Shanghai, 200241 People’s Republic of China
| | - Xinglong Tu
- School of Material Science and Engineering, Shanghai Jiao Tong University, No. 800 Dongchuan Road, Shanghai, 200240 People’s Republic of China
| | - Zheng Li
- School of Material Science and Engineering, Shanghai Jiao Tong University, No. 800 Dongchuan Road, Shanghai, 200240 People’s Republic of China
- National Engineering Research Center for Nanotechnology, No. 28 East Jiangchuan Road, Shanghai, 200241 People’s Republic of China
| | - Yanpeng Zhang
- School of Material Science and Engineering, Shanghai Jiao Tong University, No. 800 Dongchuan Road, Shanghai, 200240 People’s Republic of China
- National Engineering Research Center for Nanotechnology, No. 28 East Jiangchuan Road, Shanghai, 200241 People’s Republic of China
| | - Weiming Wang
- School of Mechanical Engineering, Shanghai Jiao Tong University, No.800 Dongchuan Road, Shanghai, 200240 People’s Republic of China
| | - Jing Lu
- National Engineering Research Center for Nanotechnology, No. 28 East Jiangchuan Road, Shanghai, 200241 People’s Republic of China
| | - Dannong He
- School of Material Science and Engineering, Shanghai Jiao Tong University, No. 800 Dongchuan Road, Shanghai, 200240 People’s Republic of China
- National Engineering Research Center for Nanotechnology, No. 28 East Jiangchuan Road, Shanghai, 200241 People’s Republic of China
| |
Collapse
|
38
|
Qiang Q, Qin J, Ma Y, Wang Z, Zhao C. Robust Conductive Micropatterns on PTFE Achieved via Selective UV-Induced Graft Copolymerization for Flexible Electronic Applications. ACS APPLIED MATERIALS & INTERFACES 2019; 11:5517-5525. [PMID: 30628441 DOI: 10.1021/acsami.8b18209] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/21/2023]
Abstract
Fabrication of stable and functional patterns on the surface of PTFE remains a great technical challenge owing to its inertness and high hydrophobicity. Here, we report for the first time the fabrication of functional micropatterns on the PTFE surface by selectively irradiating plasma-treated PTFE coated with the monomer solution. A series of uniform highly dense poly(dopamine methacrylamide) (denoted as PDMA) line patterns with line/pitch widths of 20/20 and 50/50 μm are fabricated on the surface of PTFE (denoted as PDMA-p/PTFE) using dopamine methacrylamide (DMA) as the monomer. Surface graft copolymerization occurs and is attributed to the universal adsorption of DMA and the low grafting energy barrier, compared with the polymerization energy barrier, which is also demonstrated by the DFT calculations. Further, robust well-defined metal Ag or Cu patterns with strong adhesion strength are fabricated on the surface of the PTFE film by electroless deposition and are demonstrated for applications in flexible electronics. The approach is demonstrated to be versatile for fabrication of PDMA micropatterns onto a wide range of polymeric substrates, including polypropylene and acrylonitrile butadiene styrene.
Collapse
Affiliation(s)
- Qi Qiang
- Key Laboratory of Applied Surface and Colloid Chemistry, Ministry of Education, and School of Chemistry and Chemical Engineering , Shaanxi Normal University , Xi'an 710062 , China
| | - Jiaxiang Qin
- State Key Laboratory of Environmental Adaptability for Industrial Products , China National Electric Apparatus Research Institute Co., Ltd , Guangzhou 510663 , China
| | - Yi Ma
- Key Laboratory of Applied Surface and Colloid Chemistry, Ministry of Education, and School of Chemistry and Chemical Engineering , Shaanxi Normal University , Xi'an 710062 , China
| | - Zenglin Wang
- Key Laboratory of Applied Surface and Colloid Chemistry, Ministry of Education, and School of Chemistry and Chemical Engineering , Shaanxi Normal University , Xi'an 710062 , China
| | - Chuan Zhao
- Key Laboratory of Applied Surface and Colloid Chemistry, Ministry of Education, and School of Chemistry and Chemical Engineering , Shaanxi Normal University , Xi'an 710062 , China
- School of Chemistry , The University of New South Wales , Sydney , NSW 2052 , Australia
| |
Collapse
|
39
|
Koneti S, Borges J, Roiban L, Rodrigues MS, Martin N, Epicier T, Vaz F, Steyer P. Electron Tomography of Plasmonic Au Nanoparticles Dispersed in a TiO 2 Dielectric Matrix. ACS APPLIED MATERIALS & INTERFACES 2018; 10:42882-42890. [PMID: 30457319 DOI: 10.1021/acsami.8b16436] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/09/2023]
Abstract
Plasmonic Au nanoparticles (AuNPs) embedded into a TiO2 dielectric matrix were analyzed by combining two-dimensional and three-dimensional electron microscopy techniques. The preparation method was reactive magnetron sputtering, followed by thermal annealing treatments at 400 and 600 °C. The goal was to assess the nanostructural characteristics and correlate them with the optical properties of the AuNPs, particularly the localized surface plasmon resonance (LSPR) behavior. High-angle annular dark field-scanning transmission electron microscopy results showed the presence of small-sized AuNPs (quantum size regime) in the as-deposited Au-TiO2 film, resulting in a negligible LSPR response. The in-vacuum thermal annealing at 400 °C induced the formation of intermediate-sized nanoparticles (NPs), in the range of 10-40 nm, which led to the appearance of a well-defined LSPR band, positioned at 636 nm. Electron tomography revealed that most of the NPs are small-sized and are embedded into the TiO2 matrix, whereas the larger NPs are located at the surface. Annealing at 600 °C promotes a bimodal size distribution with intermediate-sized NPs embedded in the matrix and big-sized NPs, up to 100 nm, appearing at the surface. The latter are responsible for a broadening and a redshift, to 645 nm, in the LSPR band because of increase of scattering-to-absorption ratio. Beyond differentiating and quantifying the surface and embedded NPs, electron tomography also provided the identification of "hot-spots". The presence of NPs at the surface, individual or in dimers, permits adsorption sites for LSPR sensing and for surface-enhanced spectroscopies, such as surface-enhanced Raman scattering.
Collapse
Affiliation(s)
- Siddardha Koneti
- Université Lyon, INSA-Lyon, MATEIS UMR CNRS 5510 , 21 Avenue Jean Capelle , 69621 Villeurbanne Cedex , France
| | - Joel Borges
- Centro de Física , Universidade do Minho , Campus de Gualtar , 4710 057 Braga , Portugal
| | - Lucian Roiban
- Université Lyon, INSA-Lyon, MATEIS UMR CNRS 5510 , 21 Avenue Jean Capelle , 69621 Villeurbanne Cedex , France
| | - Marco S Rodrigues
- Centro de Física , Universidade do Minho , Campus de Gualtar , 4710 057 Braga , Portugal
| | - Nicolas Martin
- Institut FEMTO-ST, UMR 6174 CNRS, Université Bourgogne Franche-Comté , 15B, Avenue des Montboucons , 25030 Besançon Cedex , France
| | - Thierry Epicier
- Université Lyon, INSA-Lyon, MATEIS UMR CNRS 5510 , 21 Avenue Jean Capelle , 69621 Villeurbanne Cedex , France
| | - Filipe Vaz
- Centro de Física , Universidade do Minho , Campus de Gualtar , 4710 057 Braga , Portugal
| | - Philippe Steyer
- Université Lyon, INSA-Lyon, MATEIS UMR CNRS 5510 , 21 Avenue Jean Capelle , 69621 Villeurbanne Cedex , France
| |
Collapse
|
40
|
Sandireddy VP, Koirala KP, Taz H, Kalyanaraman R. Thermal and Plasmonic Stabilization of Silver Nanostructures Using a Bilayer Anchoring Technique. ACS APPLIED MATERIALS & INTERFACES 2018; 10:33630-33639. [PMID: 30191708 DOI: 10.1021/acsami.8b10386] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/08/2023]
Abstract
In this work, we demonstrate how to suppress the shape instability of silver (Ag) nanotriangular pyramids following high-temperature annealing without a coating or encapsulation, thus producing a more stable optical plasmonic system. Nanosphere lithography (NSL) was used to fabricate large-area arrays of nanotriangular pyramids of Ag on glass substrates. By using a combination of morphology and spectroscopic studies it was found that exposure of this system to high temperatures of 473 K and beyond in air led to a rapid change in nanostructure shape, and thus, the surface area, with a substantial change to the original plasmonic character. On the other hand, NSL nanotriangular pyramids made from bilayers of Ag on Co or Co on Ag showed much smaller changes in shape and area following annealing up to 573 K in air. In the case of pure Ag, the NSL nanotriangular pyramid changed into a more spherical shape with an overall decrease of ∼24% in its surface area following annealing at 573 K. This lead to a large blue shift of over ∼287 nm or ∼39% in the location of the dipolar plasmonic resonance. On the other hand, the triangular shape of Ag was retained in both the metal bilayer cases, with much smaller area changes of ∼10 and ∼9%, for the Ag deposit when on Co and when under Co, respectively. Consequently, the plasmonic shifts were substantially smaller, of ∼65 nm or about 9%, in these bilayer systems. The mechanism for this stabilization was attributed to the higher surface energy of Co and much lower diffusivity of Co as well as Ag on Co that resulted in an anchoring of the Ag shape to its original state. The plasmonic quality factor for the bimetal NSL nanotriangular pyramids also showed substantially improved stability over pure Ag, further indicating that this anchoring approach is a viable pathway to produce pristine Ag surfaces for high-temperature plasmonic applications.
Collapse
|
41
|
Li Q, Jun YS. The apparent activation energy and pre-exponential kinetic factor for heterogeneous calcium carbonate nucleation on quartz. Commun Chem 2018. [DOI: 10.1038/s42004-018-0056-5] [Citation(s) in RCA: 25] [Impact Index Per Article: 4.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/06/2023] Open
|
42
|
Villanueva-Cab J, Olalde-Velasco P, Romero-Contreras A, Zhuo Z, Pan F, Rodil SE, Yang W, Pal U. Photocharging and Band Gap Narrowing Effects on the Performance of Plasmonic Photoelectrodes in Dye-Sensitized Solar Cells. ACS APPLIED MATERIALS & INTERFACES 2018; 10:31374-31383. [PMID: 30129358 DOI: 10.1021/acsami.8b10063] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/28/2023]
Abstract
The incorporation of plasmonic nanostructures in active electrodes has become one of the most attractive ways to enhance the photoconversion efficiency (PCE) of dye-sensitized solar cells (DSSCs). Although an enhancement of PCE because of the incorporation of plasmonic nanostructures of different sizes, either bare or coated, has been demonstrated, the fundamental mechanisms associated to such enhancement are still unclear. Besides, the photocurrent enhancement of plasmonic DSSCs is frequently associated to the strong surface plasmon resonance (SPR) absorption of metal nanoparticles. In this work, through oxygen K-edge soft X-ray absorption and emission spectroscopies of plasmonic electrodes and electrodynamical characterization of the fabricated cells, we demonstrate a band gap narrowing and photocharging effect on the plasmonic electrodes that definitely contribute to the PCE enhancement in plasmonic DSSCs. The incorporation of bare metal nanoparticles in active metal-oxide semiconductor electrodes such as TiO2 in optimum concentration causes an upward shift of its valence band edge, reducing its effective band gap energy and enhancing the short-circuit current of DSSCs. On the other hand, small perturbation-based stepped light-induced transient measurements of photovoltage and photocurrent of the operating DSSCs revealed an upward shift of quasi-Fermi level of photoelectrodes because of the photocharging effect induced by the incorporated metal nanoparticles. The upward shift of the quasi-Fermi level causes an increase in open-circuit voltage ( VOC), nullifying the effect of band gap reduction. The short-circuit photocurrent enhancement was controlled by the band gap narrowing, screening the SPR contribution. The results presented in this work not only clarify the contribution of SPR absorption in plasmonic DSSCs, but also highlight the importance of considering the corrections in the effective base voltage because of the quasi-Fermi level band shift during the estimation of the transport and recombination parameters of an assembled DSSC.
Collapse
Affiliation(s)
- Julio Villanueva-Cab
- Instituto de Física , Benemérita Universidad Autónoma de Puebla , Apdo. Postal J-48 , Puebla , Puebla 72570 , Mexico
| | - Paul Olalde-Velasco
- Instituto de Física , Benemérita Universidad Autónoma de Puebla , Apdo. Postal J-48 , Puebla , Puebla 72570 , Mexico
| | - Alfredo Romero-Contreras
- Instituto de Física , Benemérita Universidad Autónoma de Puebla , Apdo. Postal J-48 , Puebla , Puebla 72570 , Mexico
| | - Zengqing Zhuo
- Advanced Light Source , Lawrence Berkeley National Laboratory , 1 Cyclotron Road , Berkeley , California 94720 , United States
- School of Advanced Materials , Peking University, Shenzhen Graduate School , Shenzhen 518055 , People's Republic of China
| | - Feng Pan
- School of Advanced Materials , Peking University, Shenzhen Graduate School , Shenzhen 518055 , People's Republic of China
| | - Sandra E Rodil
- Instituto de Investigaciones en Materiales , Universidad Nacional Autónoma de México , Mexico City 04510 , Mexico
| | - Wanli Yang
- Advanced Light Source , Lawrence Berkeley National Laboratory , 1 Cyclotron Road , Berkeley , California 94720 , United States
| | - Umapada Pal
- Instituto de Física , Benemérita Universidad Autónoma de Puebla , Apdo. Postal J-48 , Puebla , Puebla 72570 , Mexico
| |
Collapse
|
43
|
Si P, Chen L, Yu L, Zhao B. Dual Colorimetric and Conductometric Responses of Silver-Decorated Polypyrrole Nanowires for Sensing Organic Solvents of Varied Polarities. ACS APPLIED MATERIALS & INTERFACES 2018; 10:29227-29232. [PMID: 30124287 DOI: 10.1021/acsami.8b09586] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/08/2023]
Abstract
We report on the discovery of an interesting dual colorimetric and conductometric response of synthesized water-based silver-decorated polypyrrole (Ag/PPy) nanowire to organic solvents, and the possible fabrication of a volatile organic compounds (VOCs) sensor based on the stimuli-responsive Ag/PPy nanocomposites. The dual-responsive nature of this material allows for a straightforward way to differentiate various VOCs within a broad polarity range by noncontact optical means via color transition, but also can provide highly accurate quantitative identification of each VOC by electronic detection.
Collapse
Affiliation(s)
- Pengxiang Si
- Department of Chemical Engineering, Waterloo Institute of Nanotechnology, Institute for Polymer Research , University of Waterloo , Waterloo , Ontario N2L 3G1 , Canada
| | - Li Chen
- Department of Chemical Engineering, Waterloo Institute of Nanotechnology, Institute for Polymer Research , University of Waterloo , Waterloo , Ontario N2L 3G1 , Canada
| | - Li Yu
- Department of Chemical Engineering, Waterloo Institute of Nanotechnology, Institute for Polymer Research , University of Waterloo , Waterloo , Ontario N2L 3G1 , Canada
| | - Boxin Zhao
- Department of Chemical Engineering, Waterloo Institute of Nanotechnology, Institute for Polymer Research , University of Waterloo , Waterloo , Ontario N2L 3G1 , Canada
| |
Collapse
|
44
|
Towards the geometric structure of small supported Au 9 clusters on Si. Sci Rep 2018; 8:12371. [PMID: 30120308 PMCID: PMC6098063 DOI: 10.1038/s41598-018-30750-w] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/31/2018] [Accepted: 08/03/2018] [Indexed: 11/08/2022] Open
Abstract
Ultra-small clusters containing few atoms are of high interest in both fundamental research and applications due to their specific functional, magnetic or chemical properties which depend on size and composition. The experimental results of the morphology of the size-selected clusters, consisting of few atoms can be an ideal benchmark for sophisticated theoretical models. With this motivation we have investigated the geometrical structure of mass-selected Au9 clusters deposited on a silicon substrate prepared by soft-landing conditions. We present results obtained experimentally by Grazing-Incidence Small-Angle X-ray Scattering (GISAXS). Considering the ultra-small size of the clusters and small quantities of material on the surface, we combined advanced techniques which allowed us to investigate the surface structure of the sample. The resulting structural sizes are in concordance with cluster theory. Using a model-based approach, the advanced X-ray techniques allow for understanding how to resolve the possible cluster structure, identify optimal experimental conditions and obtain the probable morphological information which is challenging to be obtained otherwise.
Collapse
|
45
|
Mozaffari S, Li W, Thompson C, Ivanov S, Seifert S, Lee B, Kovarik L, Karim AM. Ligand-Mediated Nucleation and Growth of Palladium Metal Nanoparticles. J Vis Exp 2018. [PMID: 29985367 DOI: 10.3791/57667] [Citation(s) in RCA: 13] [Impact Index Per Article: 2.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/31/2022] Open
Abstract
The size, size distribution and stability of colloidal nanoparticles are greatly affected by the presence of capping ligands. Despite the key contribution of capping ligands during the synthesis reaction, their role in regulating the nucleation and growth rates of colloidal nanoparticles is not well understood. In this work, we demonstrate a mechanistic investigation of the role of trioctylphosphine (TOP) in Pd nanoparticles in different solvents (toluene and pyridine) using in situ SAXS and ligand-based kinetic modeling. Our results under different synthetic conditions reveal the overlap of nucleation and growth of Pd nanoparticles during the reaction, which contradicts the LaMer-type nucleation and growth model. The model accounts for the kinetics of Pd-TOP binding for both, the precursor and the particle surface, which is essential to capture the size evolution as well as the concentration of particles in situ. In addition, we illustrate the predictive power of our ligand-based model through designing the synthetic conditions to obtain nanoparticles with desired sizes. The proposed methodology can be applied to other synthesis systems and therefore serves as an effective strategy for predictive synthesis of colloidal nanoparticles.
Collapse
Affiliation(s)
- Saeed Mozaffari
- Department of Chemical Engineering, Virginia Polytechnic Institute and State University
| | - Wenhui Li
- Department of Chemical Engineering, Virginia Polytechnic Institute and State University
| | - Coogan Thompson
- Department of Chemical Engineering, Virginia Polytechnic Institute and State University
| | - Sergei Ivanov
- Center for Integrated Nanotechnologies, Los Alamos National Laboratory
| | | | - Byeongdu Lee
- X-ray Science Division, Argonne National Laboratory
| | - Libor Kovarik
- Environmental Molecular Science Laboratory, Pacific Northwest National Laboratory
| | - Ayman M Karim
- Department of Chemical Engineering, Virginia Polytechnic Institute and State University;
| |
Collapse
|
46
|
Bonitz M, Filinov A, Abraham JW, Loffhagen D. Extending first principle plasma-surface simulations to experimentally relevant scales. ACTA ACUST UNITED AC 2018. [DOI: 10.1088/1361-6595/aaca75] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/12/2022]
|
47
|
Li MH, Yang YS, Wang KC, Chiang YH, Shen PS, Lai WC, Guo TF, Chen P. Robust and Recyclable Substrate Template with an Ultrathin Nanoporous Counter Electrode for Organic-Hole-Conductor-Free Monolithic Perovskite Solar Cells. ACS APPLIED MATERIALS & INTERFACES 2017; 9:41845-41854. [PMID: 29134795 DOI: 10.1021/acsami.7b12367] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/07/2023]
Abstract
A robust and recyclable monolithic substrate applying all-inorganic metal-oxide selective contact with a nanoporous (np) Au:NiOx counter electrode is successfully demonstrated for efficient perovskite solar cells, of which the perovskite active layer is deposited in the final step for device fabrication. Through annealing of the Ni/Au bilayer, the nanoporous NiO/Au electrode is formed in virtue of interconnected Au network embedded in oxidized Ni. By optimizing the annealing parameters and tuning the mesoscopic layer thickness (mp-TiO2 and mp-Al2O3), a decent power conversion efficiency (PCE) of 10.25% is delivered. With mp-TiO2/mp-Al2O3/np-Au:NiOx as a template, the original perovskite solar cell with 8.52% PCE can be rejuvenated by rinsing off the perovskite material with dimethylformamide and refilling with newly deposited perovskite. A renewed device using the recycled substrate once and twice, respectively, achieved a PCE of 8.17 and 7.72% that are comparable to original performance. This demonstrates that the novel device architecture is possible to recycle the expensive transparent conducting glass substrates together with all the electrode constituents. Deposition of stable multicomponent perovskite materials in the template also achieves an efficiency of 8.54%, which shows its versatility for various perovskite materials. The application of such a novel NiO/Au nanoporous electrode has promising potential for commercializing cost-effective, large scale, and robust perovskite solar cells.
Collapse
Affiliation(s)
- Ming-Hsien Li
- Department of Photonics, ‡Center for Micro/Nano Science and Technology (CMNST), and §Advanced Optoelectronics Technology Center (AOCT), National Cheng Kung University , Tainan 701, Taiwan
| | - Yu-Syuan Yang
- Department of Photonics, ‡Center for Micro/Nano Science and Technology (CMNST), and §Advanced Optoelectronics Technology Center (AOCT), National Cheng Kung University , Tainan 701, Taiwan
| | - Kuo-Chin Wang
- Department of Photonics, ‡Center for Micro/Nano Science and Technology (CMNST), and §Advanced Optoelectronics Technology Center (AOCT), National Cheng Kung University , Tainan 701, Taiwan
| | - Yu-Hsien Chiang
- Department of Photonics, ‡Center for Micro/Nano Science and Technology (CMNST), and §Advanced Optoelectronics Technology Center (AOCT), National Cheng Kung University , Tainan 701, Taiwan
| | - Po-Shen Shen
- Department of Photonics, ‡Center for Micro/Nano Science and Technology (CMNST), and §Advanced Optoelectronics Technology Center (AOCT), National Cheng Kung University , Tainan 701, Taiwan
| | - Wei-Chih Lai
- Department of Photonics, ‡Center for Micro/Nano Science and Technology (CMNST), and §Advanced Optoelectronics Technology Center (AOCT), National Cheng Kung University , Tainan 701, Taiwan
| | - Tzung-Fang Guo
- Department of Photonics, ‡Center for Micro/Nano Science and Technology (CMNST), and §Advanced Optoelectronics Technology Center (AOCT), National Cheng Kung University , Tainan 701, Taiwan
| | - Peter Chen
- Department of Photonics, ‡Center for Micro/Nano Science and Technology (CMNST), and §Advanced Optoelectronics Technology Center (AOCT), National Cheng Kung University , Tainan 701, Taiwan
| |
Collapse
|
48
|
Hummel P, Lerch A, Goller SM, Karg M, Retsch M. Simple and High Yield Synthesis of Metal-Polymer Nanocomposites: The Role of Theta-Centrifugation as an Essential Purification Step. Polymers (Basel) 2017; 9:E659. [PMID: 30965960 PMCID: PMC6418674 DOI: 10.3390/polym9120659] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/14/2017] [Revised: 11/28/2017] [Accepted: 11/28/2017] [Indexed: 11/17/2022] Open
Abstract
Nanocomposites are an important materials class, which strives to foster synergistic effects from the intimate mixture of two vastly different materials. Inorganic nanoparticles decorated with polymer ligands, for instance, aim to combine the processing flexibility of polymers with the mechanical robustness of solid state materials. The fabrication and purification of such composite nanoparticles, however, still presents a synthetic challenge. Here, we present a simple synthesis of silver polystyrene nanocomposites with a controllable interparticle distance. The interparticle distance can be well-controlled with a few nanometer precision using polystyrene ligands with various molecular weights. The nanoparticle and polymer ligand synthesis yield both materials on gram scales. Consequently, the polymer nanocomposites can also be fabricated in such large amounts. Most importantly, we introduce Θ-centrifugation as a purification method, which is capable of purifying large nanocomposite batches in a reproducible manner. We employ a range of characterization methods to prove the successful purification procedure, such as transmission electron microscopy, thermogravimetric analysis, and dynamic light scattering. Our contribution will be of high interest for many groups working on nanocomposite materials, where the sample purification has been a challenge up to now.
Collapse
Affiliation(s)
- Patrick Hummel
- Department of Chemistry, University of Bayreuth, Universitätsstr. 30, 95447 Bayreuth, Germany.
| | - Arne Lerch
- Physical Chemistry I, Heinrich-Heine-University Düsseldorf, Universitätsstr. 1, 40204 Düsseldorf, Germany.
| | | | - Matthias Karg
- Physical Chemistry I, Heinrich-Heine-University Düsseldorf, Universitätsstr. 1, 40204 Düsseldorf, Germany.
| | - Markus Retsch
- Department of Chemistry, University of Bayreuth, Universitätsstr. 30, 95447 Bayreuth, Germany.
| |
Collapse
|
49
|
Independent tuning of size and coverage of supported Pt nanoparticles using atomic layer deposition. Nat Commun 2017; 8:1074. [PMID: 29057871 PMCID: PMC5651928 DOI: 10.1038/s41467-017-01140-z] [Citation(s) in RCA: 49] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/23/2016] [Accepted: 08/22/2017] [Indexed: 11/30/2022] Open
Abstract
Synthetic methods that allow for the controlled design of well-defined Pt nanoparticles are highly desirable for fundamental catalysis research. In this work, we propose a strategy that allows precise and independent control of the Pt particle size and coverage. Our approach exploits the versatility of the atomic layer deposition (ALD) technique by combining two ALD processes for Pt using different reactants. The particle areal density is controlled by tailoring the number of ALD cycles using trimethyl(methylcyclopentadienyl)platinum and oxygen, while subsequent growth using the same Pt precursor in combination with nitrogen plasma allows for tuning of the particle size at the atomic level. The excellent control over the particle morphology is clearly demonstrated by means of in situ and ex situ X-ray fluorescence and grazing incidence small angle X-ray scattering experiments, providing information about the Pt loading, average particle dimensions, and mean center-to-center particle distance. The performance of supported nanoparticle catalysts is closely related to their size, shape and interparticle distance. Here, the authors introduce an atomic layer deposition-based strategy to independently tune the size and coverage of platinum nanoparticles with atomic-level precision.
Collapse
|
50
|
Ginting RT, Kaur S, Lim DK, Kim JM, Lee JH, Lee SH, Kang JW. Plasmonic Effect of Gold Nanostars in Highly Efficient Organic and Perovskite Solar Cells. ACS APPLIED MATERIALS & INTERFACES 2017; 9:36111-36118. [PMID: 28937203 DOI: 10.1021/acsami.7b11084] [Citation(s) in RCA: 14] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/07/2023]
Abstract
Herein, a novel strategy is presented for enhancing light absorption by incorporating gold nanostars (Au NSs) into both the active layer of organic solar cells (OSCs) and the rear-contact hole transport layer of perovskite solar cells (PSCs). We demonstrate that the power conversion efficiencies of OSCs and PSCs with embedded Au NSs are improved by 6 and 14%, respectively. We find that pegylated Au NSs are greatly dispersable in a chlorobenzene solvent, which enabled complete blending of Au NSs with the active layer. The plasmonic contributions and accelerated charge transfer are believed to improve the short-circuit current density and the fill factor. This study demonstrates the roles of plasmonic nanoparticles in the improved optical absorption, where the improvement in OSCs was attributed to surface plasmon resonance (SPR) and in PSCs was attributed to both SPR and the backscattering effect. Additionally, devices including Au NSs exhibited a better charge separation/transfer, reduced charge recombination rate, and efficient charge transport. This work provides a comprehensive understanding of the roles of plasmonic Au NS particles in OSCs and PSCs, including an insightful approach for the further development of high-performance optoelectronic devices.
Collapse
Affiliation(s)
| | | | - Dong-Kwon Lim
- KU-KIST Graduate School of Converging Science and Technology, Korea University , Seoul 136-701, Republic of Korea
| | | | | | | | | |
Collapse
|