Modulating the activity of protein conjugated to gold nanoparticles by site-directed orientation and surface density of bound protein

Changes in ficin specificity by different substrate proteins promoted by enzyme immobilization

Ficin extract has been immobilized using different supports: glyoxyl and Aspartic/1,6 hexamethylenediamine (Asp/HA) agarose beads. The latter was later submitted to glutaraldehyde modification to get covalent immobilization. The activities of these 3 kinds of biocatalysts were compared utilizing 4 different substrates, casein, hemoglobin and bovine serum albumin and benzoyl-arginine-p-nitroanilide at pH 7 and 5. Using glyoxyl-agarose, the effect of enzyme-support reaction time on the activity versus the four substrates at both pH values was studied. Reaction time has been shown to distort the enzyme due to an increase in the number of covalent support-enzyme bonds. Surprisingly, for all the substrates and conditions the prolongation of the enzyme-support reaction did not imply a decrease in enzyme activity. Using the Asp/HA supports (with different amount of HA) differences in the effect on enzyme activity versus the different substrates are much more significant, while with some substrates the immobilization produced a decrease in enzyme activity, with in other cases the activity increased. These different effects are even increased after glutaraldehyde treatment. That way, the conformational changes induced by the biocatalyst immobilization or the chemical modification fully altered the enzyme protein specificity. This may also have some implications when following enzyme inactivation.

Expanding the Genetic Code of Bioelectrocatalysis and Biomaterials

Genetic code expansion is a promising genetic engineering technology that incorporates noncanonical amino acids into proteins alongside the natural set of 20 amino acids. This enables the precise encoding of non-natural chemical groups in proteins. This review focuses on the applications of genetic code expansion in bioelectrocatalysis and biomaterials. In bioelectrocatalysis, this technique enhances the efficiency and selectivity of bioelectrocatalysts for use in sensors, biofuel cells, and enzymatic electrodes. In biomaterials, incorporating non-natural chemical groups into protein-based polymers facilitates the modification, fine-tuning, or the engineering of new biomaterial properties. The review provides an overview of relevant technologies, discusses applications, and highlights achievements, challenges, and prospects in these fields.

Advances in aldo-keto reductases immobilization for biocatalytic synthesis of chiral alcohols

Chiral alcohols are essential building blocks of numerous pharmaceuticals and fine chemicals. Aldo-keto reductases (AKRs) constitute a superfamily of oxidoreductases that catalyze the reduction of aldehydes and ketones to their corresponding alcohols using NAD(P)H as a coenzyme. Knowledge about the crucial roles of AKRs immobilization in the biocatalytic synthesis of chiral alcohols is expanding. Herein, we reviewed the characteristics of various AKRs immobilization approaches, the applications of different immobilization materials, and the prospects of continuous flow bioreactor construction by employing these immobilized biocatalysts for synthesizing chiral alcohols. Finally, the opportunities and ongoing challenges for AKR immobilization are discussed and the outlook for this emerging area is analyzed.

Ordered immobilization of serine proteases enabled by a linchpin directed modification platform

We report a chemoselective and site-selective precision engineering of lysine in proteases. The mild and physiological reaction conditions keep their auto-degradation under control. Furthermore, it enables single-site ordered immobilization, enhancing protein digestion and peptide mapping efficiency.

Immobilization of Thiol-Modified Horseradish Peroxidase on Gold Nanoparticles Enhances Enzyme Stability and Prevents Proteolytic Digestion

The specificity and efficiency of enzyme-mediated reactions have the potential to positively impact many biotechnologies; however, many enzymes are easily degraded. Immobilization on a solid support has recently been explored to improve enzyme stability. This study aims to gain insights and facilitate enzyme adsorption onto gold nanoparticles (AuNPs) to form a stable bioconjugate through the installation of thiol functional groups that alter the protein chemistry. In specific, the model enzyme, horseradish peroxidase (HRP), is thiolated via Traut's reagent to increase the robustness and enzymatic activity of the bioconjugate. This study compares HRP and its thiolated analog (THRP) to deduce the impact of thiolation and AuNP-immobilization on the enzyme activity and stability. HRP, THRP, and their corresponding bioconjugates, HRP-AuNP and THRP-AuNP, were analyzed via UV-vis spectrophotometry, circular dichroism, zeta potential, and enzyme-substrate kinetics assays. Our data show a 5-fold greater adsorption for THRP on the AuNP, in comparison to HRP, that translated to a 5-fold increase in the THRP-AuNP bioconjugate activity. The thiolated and immobilized HRP exhibited a substantial improvement in stability at elevated temperatures (50 °C) and storage times (1 month) relative to the native enzyme in solution. Moreover, HRP, THRP, and their bioconjugates were incubated with trypsin to assess the susceptibility to proteolytic digestion. Our results demonstrate that THRP-AuNP bioconjugates maintain full enzymatic activity after 18 h of incubation with trypsin, whereas free HRP, free THRP, and HRP-AuNP conjugates are rendered inactive by trypsin treatment. These results highlight the potential for protein modification and immobilization to substantially extend enzyme shelf life, resist protease digestion, and enhance biological function to realize enzyme-enabled biotechnologies.

Ultrasensitive Electrochemiluminescence Biosensor Based on Efficient Signal Amplification of Copper Nanoclusters Induced by CaMnO3 for CD44 Trace Detection

Metal nanoclusters (Me NCs) have become a research hotspot in the field of electrochemiluminescence (ECL) sensing analysis. This is primarily attributed to their excellent luminescent properties and biocompatibility along with their easy synthesis and labeling characteristics. At present, the application of Me NCs in ECL mainly focuses on precious metals, whose high cost, to some extent, limits their widespread application. In this work, Cu NCs with cathode ECL emissions in persulfate (S2O82-) were prepared as signal probes using glutathione as ligands, which exhibited stable luminescence signals and high ECL efficiency. At the same time, CaMnO3 was introduced as a co-reaction promoter to increase the ECL responses of Cu NCs, thereby further expanding their application potential in biochemical analysis. Specifically, the reversible conversion of Mn3+/Mn4+ greatly promoted the generation of sulfate radicals (SO4•-), providing a guarantee for improving the luminescence signals of Cu NCs. Furthermore, a short peptide (NARKFYKGC) was introduced to enable the fixation of antibodies to specific targets, preventing the occupancy of antigen-binding sites (Fab fragments). Therefore, the sensitivity of the biosensor could be significantly enhanced by releasing additional Fab fragments. Considering the approaches discussed above, the constructed biosensor could achieve sensitive detection of CD44 over a broad range (10 fg/mL-100 ng/mL), with an ultralow detection limit of 3.55 fg/mL (S/N = 3), which had valuable implications for the application of nonprecious Me NCs in biosensing analysis.

Region-Directed Enzyme Immobilization through Engineering Protein Surface with Histidine Clusters

Enzyme immobilization is a key enabling technology for a myriad of industrial applications, yet immobilization science is still too empirical to reach highly active and robust heterogeneous biocatalysts through a general approach. Conventional protein immobilization methods lack control over how enzymes are oriented on solid carriers, resulting in negative conformational changes that drive enzyme deactivation. Site-selective enzyme immobilization through peptide tags and protein domains addresses the orientation issue, but this approach limits the possible orientations to the N- and C-termini of the target enzyme. In this work, we engineer the surface of two model dehydrogenases to introduce histidine clusters into flexible regions not involved in catalysis, through which immobilization is driven. By varying the position and the histidine density of the clusters, we create a small library of enzyme variants to be immobilized on different carriers functionalized with different densities of various metal chelates (Co2+, Cu2+, Ni2+, and Fe3+). We first demonstrate that His-clusters can be as efficient as the conventional His-tags in immobilizing enzymes, recovering even more activity and gaining stability against some denaturing agents. Furthermore, we find that the enzyme orientation as well as the type and density of the metal chelates affect the immobilization parameters (immobilization yield and recovered activity) and the stability of the immobilized enzymes. According to proteomic studies, His-clusters enable a different enzyme orientation as compared to His-tag. Finally, these oriented heterogeneous biocatalysts are implemented in batch reactions, demonstrating that the stability achieved by an optimized orientation translates into increased operational stability.

Immobilization of azide-functionalized proteins to micro- and nanoparticles directly from cell lysate

Immobilization of proteins and enzymes on solid supports has been utilized in a variety of applications, from improved protein stability on supported catalysts in industrial processes to fabrication of biosensors, biochips, and microdevices. A critical requirement for these applications is facile yet stable covalent conjugation between the immobilized and fully active protein and the solid support to produce stable, highly bio-active conjugates. Here, we report functionalization of solid surfaces (gold nanoparticles and magnetic beads) with bio-active proteins using site-specific and biorthogonal labeling and azide-alkyne cycloaddition, a click chemistry. Specifically, we recombinantly express and selectively label calcium-dependent proteins, calmodulin and calcineurin, and cAMP-dependent protein kinase A (PKA) with N-terminal azide-tags for efficient conjugation to nanoparticles and magnetic beads. We successfully immobilized the proteins on to the solid supports directly from the cell lysate with click chemistry, forgoing the step of purification. This approach is optimized to yield low particle aggregation and high levels of protein activity post-conjugation. The entire process enables streamlined workflows for bioconjugation and highly active conjugated proteins.

Self-Assembled Protein Nanostructures via Irreversible Peptide Assembly

The quaternary structure of proteins extends the functionality of monomeric proteins. Similarly, self-assembled protein nanostructures (SPrNs) have great potential to improve the functionality and complexity of proteins; however, the difficulty associated with the fabrication of SPrNs is far greater than that associated with the fabrication of self-assembled peptides or polymers and often requires sophisticated computational design. To make the process of SPrN formation simpler and more intuitive, herein, we devise a strategy to adopt an irreversible self-assembled peptide nanostructure (SPeN) process en route to the formation of SPrNs. The strategy employs three sequential steps: first, the formation of SPeNs (an equilibrium process); second, covalent capture of SPeNs (an irreversible process); third, the final assembly of SPrNs via protein-peptide interactions (an equilibrium process). This strategy allowed us to fabricate SPrNs in which the size of the protein was approximately 9 times higher than that of the self-assembling peptide. Furthermore, we demonstrated that the irreversible SPeN could be used as a primary building block for assembly into superstructures. Overall, this strategy is conceptually as simple as SPeN fabrication and is potentially applicable to any soluble protein.

Immobilization of Aspergillus oryzae tyrosine hydroxylase on ZnO nanocrystals for improved stability and catalytic efficiency towards L-dopa production

The current study focuses on the submerged fermentation of tyrosine hydroxylase (TH) from Aspergillus oryzae IIB-9 and its immobilization on zinc oxide nanocrystals (ZnO-NPs) for increased L-dopa production. The volume of Vogel's medium (75 ml), period of incubation (72 h), initial pH (5.5), and size of inoculum (1.5 ml) were optimal for maximum TH activity. The watch glass-dried (WG) and filter paper-dried (FP) ZnO-NPs were prepared and characterized using analytical techniques. The UV-Vis spectra revealed 295 and 285 nm absorption peaks for WG-ZnO-NPs and FP-ZnO-NPs dispersed in isopropanol. X-ray diffraction analysis confirmed the crystalline nature of ZnO-NPs. FTIR spectra band from 740 to 648.1/cm and 735.8/cm to 650.1/cm showed the stretching vibrations of WG-ZnO-NPs and FP-ZnO-NPs, respectively. The particle size of ZnO-NPs observed by scanning electron microscopy (SEM) images was between 130 and 170 nm. Furthermore, the stability of immobilized TH on ZnO-NPs was determined by varying the incubation period (10 min for WG-NPs and 15 min for FP-NPs) and temperature (45 °C and 30 °C for WG and FP-NPs, respectively). Incubating enzymes with various copper, iron, manganese, and zinc salts studied the catalytic efficiency of TH. Immobilization of TH on ZnO-NPs resulted in an 11.05-fold increase in TH activity, thus enhancing stability and catalytic efficiency.

Ligation of Gold Nanoparticles with Self-Assembling, Coiled-Coil Peptides

The surface of gold nanoparticles (AuNPs) can be conjugated with a wide range of highly functional biomolecules. A common pitfall when utilizing AuNPs is their tendency to aggregate, especially when their surface is functionalized with ligands of low molecular weight (no steric repulsion) or ligands of neutral charge (no electrostatic repulsion). For biomedical applications, AuNPs that are colloidally stable are desirable because they have a high surface area and thus reactivity, resist sedimentation, and exhibit uniform optical properties. Here, we engineer the surface of AuNPs so that they remain stable when decorated with coiled-coil (CC) peptides while preserving the native polypeptide properties. We achieve this by using a neutral, mixed ligand layer composed of lipoic acid poly(ethylene glycol) and lipoic acid poly(ethylene glycol) maleimide to attach the CCs. Tuning the surface fraction of each component within the mixed ligand layer also allowed us to control the degree of AuNP labeling with CCs. We demonstrate the dynamic surface properties of these CC-AuNPs by performing a place-exchange reaction and their utility by designing an energy-transfer-based caspase-3 sensor. Overall, this study optimizes the surface chemistry of AuNPs to quantitatively present functional biomolecules while maintaining colloid stability.

Multilayer Model of Gold Nanoparticles (AuNPs) and Its Application in the Classical Molecular Dynamics Simulation of Citrate-Capped AuNPs

Studies on the interaction between gold nanoparticles (AuNPs) and functional proteins have been useful in developing diagnostic and therapeutic agents. Such studies require a realistic computational model of AuNPs for successful molecular design works. This study offers a new multilayer model of AuNPs to address the inconsistency between its molecular mechanics' interpretation and AuNP's plasmonic nature. We performed partial charge quantum calculation of AuNPs using Au13 and Au55 models. The result showed that it has partial negative charges on the surface and partial positive charges on the inner part, indicating that the AuNP model should be composed of multiatom types. We tested the partial charge parameters of these gold (Au) atoms in classical molecular dynamics simulation (CMD) of AuNPs. The result showed that our parameters performed better in simulating the adsorption of Na+ and dicarboxy acetone in terms of consistency with surface charge density than the zero charges Au in the interface force field (IFF). We proposed that the multiple-charged AuNP model can be developed further into a simpler four-atom type of Au in a larger AuNP size.

New Insights on the Size-Dependent Inhibition of Enzymes by Gold Nanoparticles

Particle size might affect the inhibition behaviors of gold nanoparticles (AuNPs) on enzyme activity by influencing the density of binding sites (ρ), the association constant (K_a), the steric hindrance of enzymes by AuNPs, the binding orientations of the enzyme on AuNPs, as well as the structural changes of enzymes. In previous studies, the effects of the above-mentioned factors, which could not be ignored in the applications of enzymatic electrochemistry, were often overshadowed by the effects of surface area. In order to study the size effect on the inhibition types and inhibitory ability of enzymes by AuNPs, we investigated the inhibition behaviors of chymotrypsin (ChT) by AuNPs with three different sizes (D1-AuNCs, D3-AuNPs, and D6-AuNPs) under the same surface area concentration. The results showed that both of the inhibition types and the inhibition ability varied with the particle size of AuNPs. D1-AuNCs inhibited ChT noncompetitively, while D3/D6-AuNPs inhibited ChT competitively. Contrary to the common sense, D6-AuNPs showed a weaker inhibitory ability than D3-AuNPs. By means of zeta potential, agarose gel electrophoresis, isothermal titration calorimetry, synchronous fluorescence spectroscopy, and circular dichroism, the mechanism of the weak inhibitory ability of D6-AuNPs was found to be the standing binding orientation caused by the small curvature. This work had certain guiding significance for the biosafety of AuNPs, the development of nanoinhibitors, as well as the applications of AuNPs in enzymatic electrochemistry.

Application of Conductive Hydrogels on Spinal Cord Injury Repair: A Review

Spinal cord injury (SCI) causes severe motor or sensory damage that leads to long-term disabilities due to disruption of electrical conduction in neuronal pathways. Despite current clinical therapies being used to limit the propagation of cell or tissue damage, the need for neuroregenerative therapies remains. Conductive hydrogels have been considered a promising neuroregenerative therapy due to their ability to provide a pro-regenerative microenvironment and flexible structure, which conforms to a complex SCI lesion. Furthermore, their conductivity can be utilized for noninvasive electrical signaling in dictating neuronal cell behavior. However, the ability of hydrogels to guide directional axon growth to reach the distal end for complete nerve reconnection remains a critical challenge. In this Review, we highlight recent advances in conductive hydrogels, including the incorporation of conductive materials, fabrication techniques, and cross-linking interactions. We also discuss important characteristics for designing conductive hydrogels for directional growth and regenerative therapy. We propose insights into electrical conductivity properties in a hydrogel that could be implemented as guidance for directional cell growth for SCI applications. Specifically, we highlight the practical implications of recent findings in the field, including the potential for conductive hydrogels to be used in clinical applications. We conclude that conductive hydrogels are a promising neuroregenerative therapy for SCI and that further research is needed to optimize their design and application.

Developing Enzyme Immobilization with Fibrous Membranes: Longevity and Characterization Considerations

Fibrous membranes offer broad opportunities to deploy immobilized enzymes in new reactor and application designs, including multiphase continuous flow-through reactions. Enzyme immobilization is a technology strategy that simplifies the separation of otherwise soluble catalytic proteins from liquid reaction media and imparts stabilization and performance enhancement. Flexible immobilization matrices made from fibers have versatile physical attributes, such as high surface area, light weight, and controllable porosity, which give them membrane-like characteristics, while simultaneously providing good mechanical properties for creating functional filters, sensors, scaffolds, and other interface-active biocatalytic materials. This review examines immobilization strategies for enzymes on fibrous membrane-like polymeric supports involving all three fundamental mechanisms of post-immobilization, incorporation, and coating. Post-immobilization offers an infinite selection of matrix materials, but may encounter loading and durability issues, while incorporation offers longevity but has more limited material options and may present mass transfer obstacles. Coating techniques on fibrous materials at different geometric scales are a growing trend in making membranes that integrate biocatalytic functionality with versatile physical supports. Biocatalytic performance parameters and characterization techniques for immobilized enzymes are described, including several emerging techniques of special relevance for fibrous immobilized enzymes. Diverse application examples from the literature, focusing on fibrous matrices, are summarized, and biocatalyst longevity is emphasized as a critical performance parameter that needs increased attention to advance concepts from lab scale to broader utilization. This consolidation of fabrication, performance measurement, and characterization techniques, with guiding examples highlighted, is intended to inspire future innovations in enzyme immobilization with fibrous membranes and expand their uses in novel reactors and processes.

Fully Aqueous Self-Assembly of a Gold-Nanoparticle-Based Pathogen Sensor

Surface plasmon resonance (SPR) is a very sensitive measure of biomolecular interactions but is generally too expensive for routine analysis of clinical samples. Here we demonstrate the simplified formation of virus-detecting gold nanoparticle (AuNP) assemblies on glass using only aqueous buffers at room temperature. The AuNP assembled on silanized glass and displayed a distinctive absorbance peak due to the localized SPR (LSPR) response of the AuNPs. Next, assembly of a protein engineering scaffold was followed using LSPR and a sensitive neutron reflectometry approach, which measured the formation and structure of the biological layer on the spherical AuNP. Finally, the assembly and function of an artificial flu sensor layer consisting of an in vitro-selected single-chain antibody (scFv)-membrane protein fusion was followed using the LSPR response of AuNPs within glass capillaries. In vitro selection avoids the need for separate animal-derived antibodies and allows for the rapid production of low-cost sensor proteins. This work demonstrates a simple approach to forming oriented arrays of protein sensors on nanostructured surfaces that uses (i) an easily assembled AuNP silane layer, (ii) self-assembly of an oriented protein layer on AuNPs, and (iii) simple highly specific artificial receptor proteins.

Controlled Temporal Release of Serum Albumin Immobilized on Gold Nanoparticles

Proteins adsorbed to gold nanoparticles (AuNPs) form bioconjugates and are critical to many emerging technologies for drug delivery, diagnostics, therapies, and other biomedical applications. A thorough understanding of the interaction between the immobilized protein and AuNP is essential for the bioconjugate to perform as designed. Here, we explore a correlation between the number of solvent-accessible thiol groups on a protein and the protein desorption rate from the AuNP surface in the presence of a competing protein. The chemical modification of human serum albumin (HSA) was carried out to install additional free thiols using Traut's reagent and create a library of HSA analogues by tailoring the molar excess of the Traut's reagent. We pre-adsorbed HSA variants onto the AuNP surface, and the resulting bioconjugates were then exposed to IgG antibody, and protein exchange was monitored as a function of time. We found that the rate of HSA displacement from the AuNP correlated with the experimentally measured number of accessible free thiol groups. Additionally, bioconjugates were synthesized using thiolated analogues of bovine serum albumin (BSA) and suspended in serum as a model for a complex sample matrix. Similarly, desorption rates with serum proteins were modulated with solvent-accessible thiols on the immobilized protein. These results further highlight the key role of Au-S bonds in the formation of protein-AuNP conjugates and provide a pathway to systematically control the number of free thiols on a protein, enabling the controlled release of protein from the surface of AuNP.

Ultrasensitive Electrochemiluminescence Biosensor with Silver Nanoclusters as a Novel Signal Probe and α-Fe2O3-Pt as an Efficient Co-reaction Accelerator for Procalcitonin Immunoassay

Herein, a high-efficiency biosensor based on ternary electrochemiluminescence (ECL) system was constructed for procalcitonin (PCT) detection. Specifically, silver nanoclusters (Ag NCs) with stable luminescence properties were prepared with small-molecule lipoic acid (LA) as the ligand, and its ECL emission in persulfate (S₂O₈^2-) was first reported. Meanwhile, the prepared Ag NCs possessed ligand-to-metal charge-transfer characteristics, thus transferring energy from LA to Ag⁺ for luminescence. Based on the small particle size, good biocompatibility, and molecular binding ability, Ag NCs-LA was used as an ideal luminescent probe. In addition, α-Fe₂O₃-Pt was introduced to facilitate the activation of S₂O₈^2-, thereby generating more sulfate radicals to react with the free radicals of Ag NCs to enhance ECL emission. The synergistic effect of the variable valence state of transition metals and high catalytic activity of noble metals endows α-Fe₂O₃-Pt with excellent catalytic ability for S₂O₈^2-. Importantly, the sensing mechanism was systematically demonstrated by UV-vis, fluorescence, and ECL analysis, as well as density functional theory calculations. At last, NKFRGKYKC was designed for specific immobilization of antibodies, thus releasing the antigen binding sites to improve the antigen recognition efficiency. Based on this, the developed biosensor showed high sensitivity for PCT detection, with a wide linear range (10 fg/mL-100 ng/mL) and a low detection limit (3.56 fg/mL), which could be extended to clinical detection of multiple biomarkers.

Predicting protein function and orientation on a gold nanoparticle surface using a residue-based affinity scale

The orientation adopted by proteins on nanoparticle surfaces determines the nanoparticle's bioactivity and its interactions with living systems. Here, we present a residue-based affinity scale for predicting protein orientation on citrate-gold nanoparticles (AuNPs). Competitive binding between protein variants accounts for thermodynamic and kinetic aspects of adsorption in this scale. For hydrophobic residues, the steric considerations dominate, whereas electrostatic interactions are critical for hydrophilic residues. The scale rationalizes the well-defined binding orientation of the small GB3 protein, and it subsequently predicts the orientation and active site accessibility of two enzymes on AuNPs. Additionally, our approach accounts for the AuNP-bound activity of five out of six additional enzymes from the literature. The model developed here enables high-throughput predictions of protein behavior on nanoparticles, and it enhances our understanding of protein orientation in the biomolecular corona, which should greatly enhance the performance and safety of nanomedicines used in vivo.

Structure and activity of native and thiolated α-chymotrypsin adsorbed onto gold nanoparticles

A detailed understanding of protein-nanoparticle interactions is critical to realize the full potential of bioconjugate-enabled technologies. Parameters that lead to conformational changes in protein structure upon adsorption must be identified and controlled to mitigate loss of biological function. We hypothesized that the installation of thiol functional groups on a protein will facilitate robust adsorption to gold nanoparticles (AuNPs) and prevent protein unfolding to achieve thermodynamic stability. Here we investigated the adsorption behavior of α-chymotrypsin (ChT) and a thiolated analog of α-chymotrypsin (T-ChT) with AuNPs. ChT, which does not present any free thiols, was modified with 2-iminothiolane (Traut's reagent) to synthesize T-ChT consisting of two free thiols. Protein adsorption to AuNPs was monitored with dynamic light scattering and UV-vis spectrophotometry, and fluorescence spectra were acquired to assess changes in protein structure induced by interaction with the AuNP. The biological function of ChT, T-ChT, and respective bioconjugates were compared using a colorimetric enzymatic assay. The thiolated analog exhibited a greater affinity for the AuNP than the unmodified ChT, as determined from adsorption isotherms. The ChT protein formed a soft protein corona in which the enzyme denatures with prolonged exposure to AuNPs and, subsequently, lost enzymatic function. Conversely, the T-ChT formed a robust hard corona on the AuNP and retained structure and function. These data support the hypothesis, provide further insight into protein-AuNP interactions, and identify a simple chemical approach to synthesize robust and functional conjugates.

Highly Efficient PTCA/Co3O4/CuO/S2O82- Ternary Electrochemiluminescence System Combined with a Portable Chip for Bioanalysis

Herein, we reported an efficient electrochemiluminescence (ECL) biosensor chip for sensitive detection of neuron-specific enolase (NSE). First, 3,4,9,10-perylenetetracarboxylic acid with good luminescence characteristics was used as a luminophore to obtain a stable ECL signal. Subsequently, hollow porous Co₃O₄/CuO concave polyhedron nanocages (CPNCs) were designed as co-reaction promoters to amplify the luminescence signals for highly sensitive trace detection of NSE. In brief, the rapid cyclic conversion of Co³⁺/Co²⁺ and Cu²⁺/Cu⁺ redox pairs could continuously catalyze the reduction of persulfate (S₂O₈^2-), thus providing a large number of essential active intermediates (SO₄^•-) for ECL emission. Meanwhile, the unique structure of Co₃O₄/CuO CPNCs possessed a large specific surface area, which greatly improved its catalytic efficiency. Third, NKFRGKYKC was developed as an affinity ligand for specific antibody fixation, which improved incubation efficiency and protected bioactivity of antibodies. Finally, we independently designed a microchip and applied it for ECL detection to improve the practical application ability of the sensor. The developed biosensor exhibited good sensitivity with a wide linear range (10 fg/mL to 100 ng/mL) and a low detection limit (3.42 fg/mL), which played an active role in the clinical application of sensing analysis.

Growth Factor and Cytokine Delivery Systems for Wound Healing

Skin wound healing is a highly coordinated process involving multiple tissue-resident and recruited cell types. Cells within the wound microenvironment respond to key secreted factors such as pro-proliferative growth factors and immunomodulatory cytokines to repair the skin and promptly restore its essential barrier role. Therefore, recombinant growth factors and cytokines are promising therapeutics for skin wounds, in particular for large acute wounds such as burns, or wounds associated with underlying pathologies such as nonhealing chronic and diabetic wounds. However, translation of growth factors and cytokines into clinically effective treatments has been limited. Short half-life, poor stability, rapid diffusion, uncontrolled signaling, and systemic side effects are currently the key challenges to developing efficient growth factor- and cytokine-based therapies. To overcome these limitations, novel delivery systems have been developed to improve the regenerative potential of recombinant growth factors and cytokines. In this review, we discuss biomaterial and protein engineering strategies used to optimize the delivery of growth factor and cytokine therapeutics for skin wound treatment.

Designing Sites in Heterogeneous Catalysis: Are We Reaching Selectivities Competitive With Those of Homogeneous Catalysts?

A critical review of different prominent nanotechnologies adapted to catalysis is provided, with focus on how they contribute to the improvement of selectivity in heterogeneous catalysis. Ways to modify catalytic sites range from the use of the reversible or irreversible adsorption of molecular modifiers to the immobilization or tethering of homogeneous catalysts and the development of well-defined catalytic sites on solid surfaces. The latter covers methods for the dispersion of single-atom sites within solid supports as well as the use of complex nanostructures, and it includes the post-modification of materials via processes such as silylation and atomic layer deposition. All these methodologies exhibit both advantages and limitations, but all offer new avenues for the design of catalysts for specific applications. Because of the high cost of most nanotechnologies and the fact that the resulting materials may exhibit limited thermal or chemical stability, they may be best aimed at improving the selective synthesis of high value-added chemicals, to be incorporated in organic synthesis schemes, but other applications are being explored as well to address problems in energy production, for instance, and to design greener chemical processes. The details of each of these approaches are discussed, and representative examples are provided. We conclude with some general remarks on the future of this field.

Designing Functional Bionanoconstructs for Effective In Vivo Targeting

The progress achieved over the last three decades in the field of bioconjugation has enabled the preparation of sophisticated nanomaterial–biomolecule conjugates, referred to herein as bionanoconstructs, for a multitude of applications including biosensing, diagnostics, and therapeutics. However, the development of bionanoconstructs for the active targeting of cells and cellular compartments, both in vitro and in vivo, is challenged by the lack of understanding of the mechanisms governing nanoscale recognition. In this review, we highlight fundamental obstacles in designing a successful bionanoconstruct, considering findings in the field of bionanointeractions. We argue that the biological recognition of bionanoconstructs is modulated not only by their molecular composition but also by the collective architecture presented upon their surface, and we discuss fundamental aspects of this surface architecture that are central to successful recognition, such as the mode of biomolecule conjugation and nanomaterial passivation. We also emphasize the need for thorough characterization of engineered bionanoconstructs and highlight the significance of population heterogeneity, which too presents a significant challenge in the interpretation of in vitro and in vivo results. Consideration of such issues together will better define the arena in which bioconjugation, in the future, will deliver functional and clinically relevant bionanoconstructs.

NIR and glutathione trigger the surface release of methotrexate linked by Diels-Alder adducts to anisotropic gold nanoparticles

The administration and controlled release of drugs over time remains one of the greatest challenges of science today. In the nanomaterials field, anisotropic gold nanoparticles (AuNPs) with plasmon bands centered at the near-infrared region (NIR), such as gold nanorods (AuNRs) and gold nanoprisms (AuNPrs), under laser irradiation, locally increase the temperature, allowing the release of drugs. In this sense, temporally controlled drug delivery could be promoted by external stimuli using thermo-reversible chemical reactions, such as Diels-Alder cycloadditions from a diene and a dienophile fragment (compound a). In this study, an antitumor drug (methotrexate, MTX) was linked to plasmonic AuNPs by a Diels-Alder adduct (compound c), which after NIR suffers a retro-Diels-Alder reaction, producing release of the drug (compound b). We obtained two nanosystems based on AuNRs and AuNPrs. Both nanoconstructs were coated with BSA-r₈ (Bovine Serum Albumin functionalized with Arg₈, all-D octa arginine) in order to increase the colloidal stability and promote internalization of the nanosystems on HeLa and SK-BR-3 cells. In addition, the presence of BSA allows protecting the cargo from being released on the extracellular environment and promotes the photothermal release of the drug in the presence of glutathione (GSH). The nanosystems' drug release profile was evaluated after NIR irradiation in the presence and absence of glutathione (GSH), showing a considerable increase of drug release when NIR light and glutathione were combined. This work broadens the range of possibilities of using two complementary strategies for the controlled release of an antitumor drug from AuNRs and AuNPrs: the photothermal cleavage of a thermolabile adduct controlled by an external stimulus (laser irradiation), complemented with the use of the intracellular metabolite GSH.

Peptide-Based Electrochemiluminescence Biosensors Using Silver Nanoclusters as Signal Probes and Pd-Cu2O Hybrid Nanoconcaves as Coreactant Promoters for Immunoassays

Metal nanoclusters (NCs) possess high light stability and biocompatibility because of their unique quantum size effect, which has gradually become a new type of electrochemiluminescence (ECL) nanomaterial for immunoassays. However, the luminescence efficiency of metal NCs is too low to meet the needs of trace analysis, which limits its application. Herein, Ag NCs served as signal probes and Pd-Cu₂O hybrid nanoconcaves served as coreaction promoters, developing a highly efficient peptide-based biosensor for neuron-specific enolase (NSE) detection. Utilizing the reversible cycle of Cu⁺/Cu²⁺ and the reduction characteristics of Pd NPs, Pd-Cu₂O greatly accelerates the reduction of S₂O₈^2-. Meanwhile, Pd-Cu₂O has good hydrogen evolution activity, which promotes the generation of oxygen by improving the redox efficiency of the overall reaction, thus increasing the yield of active intermediates (OH^•) to promote the reduction of S₂O₈^2-. Specially, this is an effective attempt to use the hydrogen evolution reaction (HER) to accelerate the ECL emission of the S₂O₈^2- system. In addition, a short peptide ligand (NARKFYKGC, NFC) was developed to implement the targeted immobilization of antibodies, which can specifically bind to the Fc fragment of antibodies, thereby avoiding the occupation of the antigen binding site (Fab fragment). The introduction of NFC not only improves the binding efficiency of antibodies but also protects its bioactivity, thus significantly improving the sensitivity of the biosensor. Based on these strategies, the proposed biosensor provides a new perspective for the applications of metal NCs in ECL systems.

A dual signal-amplified electrochemiluminescence immunosensor based on core-shell CeO2-Au@Pt nanosphere for procalcitonin detection

A dual signal-amplified sandwich electrochemiluminescence (ECL) immunosensor was fabricated for trace detection of procalcitonin (PCT). CeO₂-Au@Pt composed of sea urchin-like Au@Pt nanoparticles coated on CeO₂ hollow nanospheres was immobilized on electrode surface to electrochemically catalyze H₂O₂ to produce a large number of superoxide anion (O₂^•-). The immunosensor was prepared by linking the capture antibody on immobilized CeO₂-Au@Pt with heptapeptide (HWRGWVC), which could maintain the activity of the antibody. The prepared Au star@BSA was used to bind abundant luminol for labeling the secondary antibody (Ab₂). Upon the sandwich-typed immunoreactions, the O₂^•- could react with the introduced luminol on the immunosensor surface to produce strong ECL intensity. With an outstanding linear detection range and a low detection limit of 17 fg/mL, the ECL immunosensor permitted ultrasensitive detection of PCT at a low H₂O₂ concentration and demonstrated its high application potential in the clinical assay.

Modulation of laccase catalysed oxidations at the surface of magnetic nanoparticles

We explored the coupling of laccases to magnetic nanoparticles (MNPs) with different surface chemical coating. Two laccase variants offering two opposite and precise orientations of the substrate oxidation site were immobilised onto core-shell MNPs presenting either aliphatic aldehyde, aromatic aldehyde or azide functional groups at the particles surface. Oxidation capabilities of the six-resulting laccase-MNP hybrids were compared on ABTS and coniferyl alcohol. Herein, we show that the original interfaces created differ substantially in their reactivities with an amplitude from 1 to > 4 folds depending on the nature of the substrate. Taking enzyme orientation into account in the design of surface modification represents a way to introduce selectivity in laccase catalysed reactions.

Site-directed lysine modification of xylanase for oriented immobilization onto silicon dioxide nanoparticles

Enhanced covalent immobilization of xylanase from Chaetomium globosum (XylCg) onto SiO₂ nanoparticles was achieved by the modification of surface residues. The mutation of surface residues to lysine by site-directed mutagenesis increased the immobilization efficiency (IE) and immobilization yield (IY). The immobilized mutant XylCg (N172K-H173K-S176K-K133A-K148A) exhibited an IY of 99.5% and IE of 135%, which were 1.8- and 4.3-fold higher than immobilized wildtype (WT). Regarding the catalytic properties, the k_cat and k_cat/K_m values were 1850 s^-1 and 2030 mL mg^-1 s^-1 for the immobilized mutant, and 331 s^-1 and 404 mL mg^-1 s^-1 for the immobilized WT, respectively. Additionally, the immobilized mutant exhibited four times higher thermal stability than the immobilized WT at 60 °C. These results suggest that surface-mutated lysine residues confer good stability and orientation on the support matrix, thus improving the overall performance of xylanase.

Adsorption of bovine serum albumin on gold nanoprisms: interaction and effect of NIR irradiation on protein corona

Because of their photothermal properties, gold nanoparticles (AuNPs) have gained attention regarding their use in drug delivery and therapeutic applications. In this sense, it is interesting to consider their interactions with biologically available proteins, such as serum albumin, as well as the effects of irradiation and photothermal conversion on the protein structure that can lead to a loss of function or generate an immune response. Gold nanoprisms (AuNPrs) have gained interest due to their low toxicity, ease of synthesis, and excellent stability, promoting their use in bioapplications such as surface-enhanced Raman spectroscopy (SERS), drug delivery, and photothermal therapy. The interaction between AuNPrs, with plasmon bands centred in the near-infrared region (NIR), and bovine serum albumin (BSA) has not been explored yet. UV-Vis spectroscopy, dynamic light scattering (DLS) and fluorescence spectroscopy were used to study the interaction between AuNPrs and BSA in addition to estimation of the adsorption rate and kinetic and thermodynamic parameters (K, ΔH°, ΔG°, ΔS°, and Ea) using adsorption isotherms and Langmuir and Freundlich models. The results suggest spontaneous cooperative binding in multilayer adsorption, achieved by the chemisorption of BSA on the AuNPr surface through the S-Au interaction, as confirmed by Raman spectroscopy. On the other hand, the photothermal conversion efficiency (PE) of the coated nanoparticles after NIR irradiation was assessed, resulting in a slight decrease in the PE of BSA coated on AuNPrs in comparison with that of noncapped nanoparticles. The effect of the irradiation on the protein conformation of capped nanoparticles was also assessed; circular dichroism showed BSA unfolding upon interaction with AuNPrs, with a decrease in the α-helix and β-sheet contents, as well as an increase in random coil conformations. Changes in the Raman spectrum suggest a modification of the disposition of the protein residues exposed to the gold surface after NIR irradiation; but at the secondary structure level, no relevant changes were observed. This provides possibilities for the use of NPs-BSA for bioapplications based on the photothermal effect promoted by laser irradiation, since the biological identity of the protein is preserved after NIR irradiation.

Functionalization of colloidal nanoparticles with a discrete number of ligands based on a "HALO-bioclick" reaction

A recombinant HALO-GFP fusion protein was designed and isolated to demonstrate the feasibility of controlling the number and orientation of protein ligands to be conjugated on colloidal gold nanoparticles. AuNPs functionalized with exactly one or exactly two GFP molecules exhibited fully preserved functionality of the protein. The method is very straightforward and generally provides highly bioactive nanoparticle-protein conjugates.

Acceleration of catalysis in dihydrofolate reductase by transient, site-specific photothermal excitation

We have studied the role of protein dynamics in chemical catalysis in the enzyme dihydrofolate reductase (DHFR), using a pump-probe method that employs pulsed-laser photothermal heating of a gold nanoparticle (AuNP) to directly excite a local region of the protein structure and transient absorbance to probe the effect on enzyme activity. Enzyme activity is accelerated by pulsed-laser excitation when the AuNP is attached close to a network of coupled motions in DHFR (on the FG loop, containing residues 116-132, or on a nearby alpha helix). No rate acceleration is observed when the AuNP is attached away from the network (distal mutant and His-tagged mutant) with pulsed excitation, or for any attachment site with continuous wave excitation. We interpret these results within an energy landscape model in which transient, site-specific addition of energy to the enzyme speeds up the search for reactive conformations by activating motions that facilitate this search.

Relevance of Electrostatics for the Interaction of Tyrosine Hydroxylase with Porous Silicon Nanoparticles

Tyrosine hydroxylase (TH) is the enzyme catalyzing the rate-limiting step in the synthesis of dopamine in the brain. Developing enzyme replacement therapies using TH could therefore be beneficial to patient groups with dopamine deficiency, and the use of nanocarriers that cross the blood–brain barrier seems advantageous for this purpose. Nanocarriers may also help to maintain the structure and function of TH, which is complex and unstable. Understanding how TH may interact with a nanocarrier is therefore crucial for the investigation of such therapeutic applications. This work describes the interaction of TH with porous silicon nanoparticles (pSiNPs), chosen since they have been shown to deliver other macromolecular therapeutics successfully to the brain. Size distributions obtained by dynamic light scattering show a size increase of pSiNPs upon addition of TH and the changes observed at the surface of pSiNPs by transmission electron microscopy also indicated TH binding at pH 7. As pSiNPs are negatively charged, we also investigated the binding at pH 6, which makes TH less negatively charged than at pH 7. However, as seen by thioflavin-T fluorescence, TH aggregated at this more acidic pH. TH activity was unaffected by the binding to pSiNPs most probably because the active site stays available for catalysis, in agreement with calculations of the surface electrostatic potential pointing to the most positively charged regulatory domains in the tetramer as the interacting regions. These results reveal pSiNPs as a promising delivery device of enzymatically active TH to increase local dopamine synthesis.

Modulating the biological function of protein by tailoring the adsorption orientation on nanoparticles

Protein orientation in nanoparticle-protein conjugates plays a crucial role in binding to cell receptors and ultimately, defines their targeting efficiency. Therefore, understanding fundamental aspects of the role of protein orientation upon adsorption on the surface of nanoparticles (NPs) is vital for the development of clinically important protein-based nanomedicines. In this work, new insights on the effect of the different orientation of cytochrome c (cyt c) bound to gold nanoparticles (GNPs) using various ligands on its apoptotic activity is reported. Time-of-Flight Secondary-Ion Mass Spectrometry (ToF-SIMS), electrochemical and circular dichroism (CD) analyses are used to investigate the characteristics of cyt c orientation and structure on functionalized GNPs. These studies indicate that the orientation and position of the heme ring inside the cyt c structure can be altered by changing the surface chemistry on the GNPs. A difference in the apoptosis inducing capability because of different orientation of cyt c bound to the GNPs is observed. These findings indicate that the biological activity of a protein can be modulated on the surface of NPs by varying its adsorption orientation. This study will impact on the rational design of new nanoscale biosensors, bioelectronics, and nanoparticle-protein based drugs.

Three Decades of Research about the Corona Around Nanoparticles: Lessons Learned and Where to Go Now

The research about how a nanoparticle (NP) interacts with a complex biological solution has been conducted, according to the literature, for almost three decades. A significant amount of data has been generated, especially in the last one and a half decade. First, it became its own research field which was later divided into many subresearch fields. This outlook does not aim to be a comprehensive review of the field or any of its subresearch fields. There is too much data published to attempt that. Instead, here it has been tried to highlight what, in the opinion, is the main step taken during these three decades. Thereafter, the weaknesses and end are pointed out with what needs to be the main focus for the future to understand the protein corona formation in the bloodstream, which is a prerequisite for the developing of true target specific drug-delivering nanoparticles.

Role of Free Thiol on Protein Adsorption to Gold Nanoparticles

Protein-gold nanoparticle (AuNP) bioconjugates have many potential applications in nanomedicine. A thorough understanding of the interaction between the protein and the AuNP is critical to engineering these functional bioconjugates with desirable properties. In this work, we investigate the role of free thiols presented by the protein on the stability of the protein-AuNP conjugate. Human serum albumin (HSA) was modified with 2-iminothiolane (Traut's reagent) to introduce additional thiols onto the protein surface, and three variants of HSA were synthesized to present 1, 5, and 20 free thiols by controlling the molar excess of the chemical modifier. Protein exchange studies on AuNPs were conducted using these HSA species and an IgG antibody which exhibited 10 free thiols. Antibody-AuNP conjugates were synthesized, purified, and dispersed in solutions containing each of the HSA species. No protein exchange was detected with the HSA or modified HSA containing 5 thiols; however, 85% of the antibody was displaced on the AuNP surface by the extensively thiolated HSA presenting 20 free thiols. Furthermore, the impact of the protein adsorption sequence was probed in which each of the HSA species were preadsorbed onto the AuNP and dispersed in a solution of antibody. The antibody fully displaced the HSA with a single thiol from the AuNP within 3 h, required 24 h to completely displace the modified HSA containing 5 thiols, and was unable to displace the modified HSA containing 20 thiols. These results indicate that the number of Au-S interactions governs the binding interaction between the protein and the AuNP. This work provides further insight into the protein-AuNP binding mechanism and identifies important design principles for engineered proteins to optimize bioconjugates.

Heparin mimics and fibroblast growth factor-2 fabricated nanogold composite in promoting neural differentiation of mouse embryonic stem cells

The replacement therapy or transplantation using neural cells, which differentiated from stem cells, has emerged as a promising strategy for repairing damaged neural tissues and helping functional recovery in the treatment of neural system diseases. The challenge, however, is how to control embryonic stem cell fate so that neural differentiation can be efficiently directed to enrich a neuron cell population, and meanwhile to maintain their bioactivities. This is a key question and has a very significant impact in regenerative medicine. Here we proposed a new neural-differentiation inductive nanocomposite, containing gold nanoparticles (AuNPs), poly(2-methacrylamido glucopyranose-co-3-sulfopropyl acrylate) (PMS), and basic fibroblast growth factor (FGF2), for the high efficient directional neural-specific differentiation of mouse embryonic stem cells (mESCs). In this AuNP-PMS/FGF2 composite, PMS, playing as the high-active mimic of heparin/heparan sulfate (HS), is covalently anchored to AuNPs and bound with FGF2 on the surface of nanoparticles, forming a HS/FGF2 complex nanomimics to facilitate its binding to FGF receptor (FGFR) and promote high neural-inductive activity of mESCs. The stability, bioactivity and biocompatibility of the composite are investigated in this study. The results showed that the AuNP-PMS/FGF2 composite could maintain a long-term stability at room temperature for at least 8 days, and greatly promote the neural differentiation of mESCs. Compared with the other materials, the AuNP-PMS/FGF2 composite could significantly stimulate the expression of the specific neural differentiation markers (nestin and β3-tubulin), while obviously down-regulate the mRNA production of pluripotency marker Oct-4 in mESCs. Moreover, the promotion effect of the composite on neuronal maturation marker β3-tubulin expression achieved maximally at the low concentration of FGF2 (4 ng/mL), which suggested the high efficiency of AuNP-PMS/FGF2 composite in neural differentiation of mESCs. Meanwhile, both mESCs and L929 cells showed desirable growth during the incubation with AuNP-PMS/FGF2 composite. The AuNP-PMS/FGF2 system presents a new way to achieve HS/FGF2 complex nanomimics efficiently for the neural differentiation of mESCs.

Guanosine Assembly Enabled Gold Nanorods with Dual Thermo- and Photoswitchable Plasmonic Chiroptical Activity

Noble metal nanostructures with plasmonic circular dichroism (PCD) have attracted interest, and a modulation of PCD is of great importance for their potential applications. Herein, we propose a supramolecular strategy for achieving dual thermal and photoswitchable PCD. When guanosine (G), deoxyguanosine (dG), and boric acid modified achiral gold nanorods (GNRs) were coassembled into a hydrogel, hybrid nanofibers with PCD were produced. When the hydrogel was heated, the nanofiber was disassembled and the PCD disappeared. As the hydrogel was thermally reversible, a thermo-controlled PCD could be realized. The hybrid hydrogel also showed photoswitchable PCD. When the gel was irradiated with an IR laser, the PCD disappeared. It can be restored by being placed at room temperature. Moreover, the hybrid gel was selectively responsive to the circularly polarized light (CPL). For (G/dG)-GNR hybrid assemblies, the R-CPL irradiation showed photothermal efficiency higher than that of L-CPL, which made it useful for an IR-irradiation-controlled release of drug molecules.

Quantum Dots and Gold Nanoparticles as Scaffolds for Enzymatic Enhancement: Recent Advances and the Influence of Nanoparticle Size

Nanoparticle scaffolds can impart multiple benefits onto immobilized enzymes including enhanced stability, activity, and recoverability. The magnitude of these benefits is modulated by features inherent to the scaffold–enzyme conjugate, amongst which the size of the nanoscaffold itself can be critically important. In this review, we highlight the benefits of enzyme immobilization on nanoparticles and the factors affecting these benefits using quantum dots and gold nanoparticles as representative materials due to their maturity. We then review recent literature on the use of these scaffolds for enzyme immobilization and as a means to dissect the underlying mechanisms. Detailed analysis of the literature suggests that there is a “sweet-spot” for scaffold size and the ratio of immobilized enzyme to scaffold, with smaller scaffolds and lower enzyme:scaffold ratios generally providing higher enzymatic activities. We anticipate that ongoing studies of enzyme immobilization onto nanoscale scaffolds will continue to sharpen our understanding of what gives rise to beneficial characteristics and allow for the next important step, namely, that of translation to large-scale processes that exploit these properties.

A Robust and General Approach to Quantitatively Conjugate Enzymes to Plasmonic Nanoparticles

Bioconjugates of plasmonic nanoparticles have received considerable attention due to their potential biomedical applications. Successful bioconjugation requires control over the number and activity of the conjugated proteins and the colloidal stability of the particles. In practice, this requires reoptimization of the conjugation protocol for each combination of protein and nanoparticle. Here, we report a robust and general protocol that allows for the conjugation of a range of proteins to different types of nanoparticles using very short polyethylene-glycol(PEG) linkers, while simultaneously preserving protein activity and colloidal stability. The use of short linkers ensures that the protein is located close to the particle surface, where the refractive index sensitivity and near-field enhancement are maximal. We demonstrate that the use of a Tween20 containing stabilizing buffer is critical in maintaining colloidal stability and protein function throughout the protocol. We obtain quantitative control over the average number of enzymes per particle by either varying the number of functional groups on the particle or the enzyme concentration during incubation. This new route of preparing quantitative protein-nanoparticle bioconjugates paves the way to develop rational and quantitative strategies to functionalize nanoparticles for applications in sensing, medical diagnostics, and drug delivery.

Dual-functional gold nanoparticles with antimicrobial and proangiogenic activities improve the healing of multidrug-resistant bacteria-infected wounds in diabetic mice

Gold nanoparticles (Au NPs) are conjugated with the vascular endothelial growth factor-A₁₆₅ (VEGF-A₁₆₅) and (11-mercaptoundecyl)-N,N,N-trimethylammonium (11-MTA) cation to form dual-functional gold nanoparticles (11-MTA/VEGF-Au NPs) that possess antimicrobial and proangiogenic activities for wound healing in diabetic (db/db) mice. VEGF-A₁₆₅ is a popular proangiogenic growth factor that stimulates multiple components in the wound-healing cascade. On the other hand, 11-MTA possesses antibacterial activity and can be bound to Au NPs easily through Au-S bonding. We have found that the surface density of VEGF-A₁₆₅ plays a vital role in promoting the proliferation, migration, and tube formation of human umbilical vein endothelial cells. 11-MTA tethered on the VEGF-modified Au NPs enables the nanocomposites (i.e., 11-MTA/VEGF-Au NPs) to exhibit a strong antimicrobial activity against multidrug-resistant bacteria [methicillin-resistant S. aureus (MRSA)]. The minimal inhibition concentration of 11-MTA/VEGF-Au NPs is ∼450-fold lower than that of 11-MTA, revealing their high antibacterial efficiency. 11-MTA/VEGF-Au NPs exhibit high biocompatibility. 11-MTA/VEGF-Au NPs as dressing materials to treat MRSA-infected wounds in diabetic mice not only show strong in vivo bactericidal activities but also enhance the healing process of the formation of collagen fibers and epithelialization. Our results show that dual-functional 11-MTA/VEGF-Au NPs are promising agents for clinical applications like treating chronic wound infections.

Site-Specific Incorporation of a Dithiolane Containing Amino Acid into Proteins

We have genetically encoded a dithiolane containing amino acid (dtF) in Escherichia coli (E. coli) using a polyspecific aminoacyl-tRNA synthetase (aaRS)/amber suppressor tRNA pair. To demonstrate the utility of dtF for bioapplications, we synthesized gold nanoparticle (AuNP) constructs with a mutant superfolder green fluorescent protein (sfGFP) [sfGFP-AuNP] as a model for the protein-metal conjugation. The resulting sfGFP-AuNP constructs show directional homogeneity and enhanced chemical durability compared to their cysteine analogues toward excess environmental 1,4-dithiothreitol (DTT).

Antibodies Irreversibly Adsorb to Gold Nanoparticles and Resist Displacement by Common Blood Proteins

Gold nanoparticles (AuNPs) functionalized with proteins to impart desirable surface properties have been developed for many nanobiotechnology applications. A strong interaction between the protein and nanoparticle is critical to the formation of a stable conjugate to realize the potential of these emerging technologies. In this work, we examine the robustness of a protein layer adsorbed onto gold nanoparticles while under the stress of a physiological environment that could potentially lead to protein exchange on the nanoparticle surface. The adsorption interaction of common blood plasma proteins (transferrin, human serum albumin, and fibrinogen) and anti-horseradish peroxidase antibody onto AuNPs is investigated by nanoparticle tracking analysis. Our data show that a monolayer of protein is formed at saturation for each protein, and the maximum size increase for the conjugate, relative to the AuNP core, correlates with the protein size. The binding affinity of each protein to the AuNP is extracted from a best fit of the adsorption isotherm to the Hill equation. The antibody displays the greatest affinity (K_d = 15.2 ± 0.8 nM) that is ∼20-65 times stronger than the affinity of the other plasma proteins. Antibody-AuNP conjugates were prepared, purified, and suspended in solutions of blood plasma proteins to evaluate the stability of the antibody layer. An enzyme-mediated assay confirms that the antibody-AuNP interaction is irreversible, and the adsorbed antibody resists displacement by the plasma proteins. This work provides insight into the capabilities and potential limitations of antibody-AuNP-enabled technologies in biological systems.

Advances in surface-enhanced Raman spectroscopy (SERS) substrates for lipid and protein characterization: sensing and beyond

Surface-enhanced Raman spectroscopy (SERS) has become an essential ultrasensitive analytical tool for biomolecular analysis of small molecules, macromolecular proteins, and even cells. SERS enables label-free, direct detection of molecules through their intrinsic Raman fingerprint. In particular, protein and lipid bilayers are dynamic three-dimensional structures that necessitate label-free methods of characterization. Beyond direct detection and quantitation, the structural information contained in SERS spectra also enables deeper biophysical characterization of biomolecules near metallic surfaces. Therefore, SERS offers enormous potential for such systems, although making measurements in a nonperturbative manner that captures the full range of interactions and activity remains a challenge. Many of these challenges have been overcome through advances in SERS substrate development, which have expanded the applications and targets of SERS for direct biomolecular quantitation and biophysical characterization. In this review, we will first discuss different categories of SERS substrates including solution-phase, solid-supported, tip-enhanced Raman spectroscopy (TERS), and single-molecule substrates for biomolecular analysis. We then discuss detection of protein and biological lipid membranes. Lastly, biophysical insights into proteins, lipids and live cells gained through SERS measurements of these systems are reviewed.

A Study of the Activity of Recombinant Mn-Superoxide Dismutase in the Presence of Gold and Silver Nanoparticles

Superoxide dismutase (SOD) is one of the best characterized enzyme maintaining the redox state in the cell. A bacterial expression system was used to produce human recombinant manganese SOD with a His-tag on the C-end of the protein for better purification. In addition, gold and silver nanoparticles were chemically synthesized in a variety of sizes, and then mixed with the enzyme for immobilization. Analysis by dynamic light scattering and scanning transmission electron microscopy revealed no aggregates or agglomerates of the obtained colloids. After immobilization of the protein on AuNPs and AgNPs, the conjugates were analyzed by SDS-PAGE. It was determined that SOD was adsorbed only on the gold nanoparticles. Enzyme activity was analyzed in colloids of the gold and silver nanoparticles bearing SOD. The presence of a nanoparticle did not affect enzyme activity; however, the amount of protein and size of the gold nanoparticle did influence the enzymatic activity of the conjugate. Our findings confirm that active recombinant human superoxide dismutase can be produced using a bacterial expression system, and that the enzyme can be immobilized on metal nanoparticles. The interaction between enzymes and metal nanoparticles requires further investigation.