Homogeneous Suspensions of Individualized Microfibrils from TEMPO-Catalyzed Oxidation of Native Cellulose

Periodate oxidation-mediated nanocelluloses: Preparation, functionalization, structural design, and applications

In recent years, the remarkable progress in nanotechnology has ignited considerable interest in investigating nanocelluloses, an environmentally friendly and sustainable nanomaterial derived from cellulosic feedstocks. Current research primarily focuses on the preparation and applications of nanocelluloses. However, to enhance the efficiency of nanofibrillation, reduce energy consumption, and expand nanocellulose applications, chemical pre-treatments of cellulose fibers have attracted substantial interest and extensive exploration. Various chemical pre-treatment methods yield nanocelluloses with diverse functional groups. Among these methods, periodate oxidation has garnered significant attention recently, due to the formation of dialdehyde cellulose derived nanocellulose, which exhibits great promise for further modification with various functional groups. This review seeks to provide a comprehensive and in-depth examination of periodate oxidation-mediated nanocelluloses (PONCs), including their preparation, functionalization, hierarchical structural design, and applications. We believe that PONCs stand as highly promising candidates for the development of novel nano-cellulosic materials.

The effect of pre-treatment and process conditions on the gas barrier properties of fibrillated cellulose films and coatings: A review

Microfibrillated cellulose (MFC) is a bio-material produced by disintegrating cellulose fibres into fibrillar components. MFC could offer a sustainable solution to packaging needs since it can form an excellent barrier to oxygen. However, a comprehensive understanding of how MFC characteristics impact barrier properties of MFC films or coatings is required. This article critically reviews how the extent of separation of fibres into fibrils-and any resulting changes to the crystallinity and degree of polymerisation of cellulose-influences gas barrier properties of MFC films or coatings. Findings from publications investigating the barrier performance of MFC prepared through different processes intending to increase the effectiveness of fibrillation are evaluated and compared. The effects of processing conditions or chemical pre-treatments on barrier properties of MFC films or coatings are then discussed. A comparison of reported results showed that morphology and size polydispersity of the cellulose strongly influence the barrier properties of MFC. However, changing the MFC production process to decrease fibril diameter and polydispersity can result in changes to cellulose crystallinity; reduction in fibril length; introduction of bulky functional groups; or increased fibril surface charge: all of which could have a negative impact on the barrier properties of the final films or coatings.

Nanocellulose-mediated bilayer hydrogel actuators with thermo-responsive, shape memory and self-sensing performances

Inspired by creatures, abundant stimulus-responsive hydrogel actuators with diverse functionalities have been manufactured for applications in soft robotics. However, constructing a shape memory and self-sensing bilayer hydrogel actuator with high mechanical strength and strong interfacial bonding still remains a challenge. Herein, a novel bilayer hydrogel with a stimulus-responsive TEMPO-oxidized cellulose nanofibers/poly(N-isopropylacrylamide) (TOCN/PNIPAM) layer and a non-responsive TOCN/polyacrylamide (TOCN/PAM) layer is proposed as a thermosensitive actuator. TOCNs as a nano-reinforced phase provide a high mechanical strength and endow the hydrogel actuator with a strong interfacial bonding. Due to the incorporation of TOCNs, the TOCN/PNIPAM hydrogel exhibits a high compressive strength (~89.2 kPa), elongation at break (~170.7 %) and tensile strength (~24.0 kPa). The prepared PNIPAM/TOCN/PAM hydrogel actuator performs the roles of an encapsulation, jack, temperature-controlled fluid valve and temperature-control manipulator. The incorporation of Fe3+ further endows the bilayer hydrogel actuator with a synergistic performance of shape memory and temperature-driven, which can be used as a temperature-responsive switch to detect ambient temperature. The PNIPAM/TOCN/PAM-Fe3+ conductive hydrogel can be assembled into a flexible sensor and generate sensing signals when driven by temperature changes to achieve real-time feedback. This research may lead to new insights into the design and manufacturing of intelligent flexible soft robots.

In situ biomineralization reinforcing anisotropic nanocellulose scaffolds for guiding the differentiation of bone marrow-derived mesenchymal stem cells

Nanocellulose (NC) is a promising biopolymer for various biomedical applications owing to its biocompatibility and low toxicity. However, it faces challenges in tissue engineering (TE) applications due to the inconsistency of the microenvironment within the NC-based scaffolds with target tissues, including anisotropy microstructure and biomechanics. To address this challenge, a facile swelling-induced nanofiber alignment and a novel in situ biomineralization reinforcement strategies were developed for the preparation of NC-based scaffolds with tunable anisotropic structure and mechanical strength for guiding the differentiation of bone marrow-derived mesenchymal stem cells for potential TE application. The bacterial cellulose (BC) and cellulose nanofibrils (CNFs) based scaffolds with tunable swelling anisotropic index in the range of 10-100 could be prepared by controlling the swelling medium. The in situ biomineralization efficiently reinforced the scaffolds with 2-4 times and 10-20 times modulus increasement for BC and CNFs, respectively. The scaffolds with higher mechanical strength were superior in supporting cell growth and proliferation, suggesting the potential application in TE application. This work demonstrated the feasibility of the proposed strategy in the preparation of scaffolds with mechanical anisotropy to induce cells-directed differentiation for TE applications.

Nanocellulose-mediated conductive hydrogels with NIR photoresponse and fatigue resistance for multifunctional wearable sensors

The rapid development of hydrogels has garnered significant attention in health monitoring and human motion sensing. However, the synthesis of multifunctional conductive hydrogels with excellent strain/pressure sensing and photoresponsiveness remains a challenge. Herein, the conductive hydrogels (BPTP) with excellent mechanical properties, fatigue resistance and photoresponsive behavior composed of polyacrylamide (PAM) matrix, 2,2,6,6-tetramethylpiperidin-1-yloxy-oxidized cellulose nanofibers (TOCNs) reinforcement and polydopamine-modified black phosphorus (BP@PDA) photosensitizer are prepared through a facile free-radical polymerization approach. The PDA adhered to the BP surface by π-π stacking promotes the optical properties of BP while also preventing BP oxidation from water. Through hydrogen bonding interactions, TOCNs improve the homogeneous dispersion of BP@PDA nanosheets and the mechanical toughness of BPTP. Benefiting from the synergistic effect of PDA and TOCNs, the conductive BPTP integrates superior mechanical performances, excellent photoelectric response and photothermal conversion capability. The BPTP-based sensor with high cycling stability demonstrates superior strain sensitivity (GF = 6.0) and pressure sensing capability (S = 0.13 kPa-1) to monitor various human activities. Therefore, this work delivers an alternative construction strategy for generating high-performance conductive hydrogels as multifunctional wearable sensors.

Ultrathin Freestanding Nanocellulose Film Prepared from TEMPO-Mediated Oxidation and Homogenized Hydrogel

This paper presents a versatile method to fabricate ultrathin nanofibrillated cellulose (NFC) films as thin as 800 nm by blade coating, which is compatible with a roll-to-roll process on a large scale. Our approach allows obtaining a dried nanocellulose film within a span of 1 h subsequent to 2,2,6,6-tetramethylpiperidine-1-oxyl radical-assisted oxidation and homogenization procedures. One of the thinnest freestanding NFC films with a thickness of 800 nm is achieved using a blade coating of nanocellulose after 72 h of oxidation followed by homogenization with a channel size of 65 μm. Incorporating water-soluble CdTe core-type quantum dots into the nanocellulose film led to a uniform emission under 385 nm UV irradiation, indicating excellent material compatibility. We anticipate nanocellulose developed in our study to be beneficial in biomimicry flying objects, environmentally friendly encapsulation, color filters, and energy storage device membranes, to name a few.

Reversible Surface Engineering of Cellulose Elementary Fibrils: From Ultralong Nanocelluloses to Advanced Cellulosic Materials

Cellulose nanofibrils (CNFs) are supramolecular assemblies of cellulose chains that provide outstanding mechanical support and structural functions for cellulosic organisms. However, traditional chemical pretreatments and mechanical defibrillation of natural cellulose produce irreversible surface functionalization and adverse effects of morphology of the CNFs, respectively, which limit the utilization of CNFs in nanoassembly and surface functionalization. Herein, this work presents a facile and energetically efficient surface engineering strategy to completely exfoliate cellulose elementary fibrils from various bioresources, which provides CNFs with ultrahigh aspect ratios (≈1400) and reversible surface. During the mild process of swelling and esterification, the crystallinity and the morphology of the elementary fibrils are retained, resulting in high yields (98%) with low energy consumption (12.4 kJ g-1). In particular, on the CNF surface, the surface hydroxyl groups are restored by removal of the carboxyl moieties via saponification, which offers a significant opportunity for reconstitution of stronger hydrogen bonding interfaces. Therefore, the resultant CNFs can be used as sustainable building blocks for construction of multidimensional advanced cellulosic materials, e.g., 1D filaments, 2D films, and 3D aerogels. The proposed surface engineering strategy provides a new platform for fully utilizing the characteristics of the cellulose elementary fibrils in the development of high-performance cellulosic materials.

Re-Designing Cellulosic Core-Shell Composite Fibers for Advanced Photothermal and Thermal-Regulating Performance

Flexible fibers and textiles featuring photothermal conversion and storage capacities are ideal platforms for solar-energy utilization and wearable thermal management. Other than using fossil-fuel-based synthetic fibers, re-designing natural fibers with nanotechnology is a sustainable but challenging option. Herein, advanced core-shell structure fibers based on plant-based nanocelluloses are obtained using a facile co-axial wet-spinning process, which has superior photothermal and thermal-regulating performances. Besides serving as the continuous matrix, nanocelluloses also have two other important roles: dispersing agent when exfoliating molybdenum disulfide (MoS2), and stabilizer for phase change materials (PCM) in the form of Pickering emulsion. Consequently, the shell layer contains well-oriented nanocelluloses and MoS2, and the core layer contains a high content of PCM in a leak-proof encapsulated manner. Such a hierarchical cellulosic supportive structure leads to high mechanical strength (139 MPa), favorable flexibility, and large latent heat (92.0 J g-1), surpassing most previous studies. Furthermore, the corresponding woven cloth demonstrates satisfactory thermal-regulating performance, high solar-thermal conversion and storage efficiency (78.4-84.3%), and excellent long-term performance. In all, this work paves a new way to build advanced structures by assembling nanoparticles and polymers for functional composite fibers in advanced solar-energy-related applications.

Algal growth inhibition test with TEMPO-oxidized cellulose nanofibers

Ecotoxicity data on cellulose nanofibers (CNFs) are limited despite their wide potential applications prospects, such as structural and packaging materials, filters, coatings, foods, and cosmetics. In this study, toxicity tests of 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO)-oxidized CNFs (TEMPO-CNFs), which are one of the major CNF products commercially available in Japan, on the green alga Raphidocelis subcapitata were conducted. As nanomaterials are considered difficult-to-test substances, the Organisation for Economic Co-operation and Development has released a guidance document that provides considerations regarding ecotoxicity tests of nanomaterials. In the algal growth inhibition tests of TEMPO-CNFs, there were specific issues to be examined, including the effects of medium components on the characteristics of TEMPO-CNFs, CNF interference with algal density measurements, algal interference with CNF measurements, and the effects of ion concentration changes in the test medium by the addition of CNFs on algal growth. To examine these issues, we conducted preliminary studies and established a suitable test method for algal growth inhibition tests of TEMPO-CNFs. We confirmed that the components in the medium for algal growth inhibition tests had negligible effects on the characteristics (zeta-potential, viscosity, and morphology) and concentration stability of TEMPO-CNFs and that in vitro and in vivo fluorescence measurements were applicable for estimating the algal densities, without interference by TEMPO-CNFs. In contrast, we observed that the grown algae interfered with the CNF concentration measurements. Therefore, we established a method to correct the measured CNF concentrations by estimating the algal contribution. Furthermore, we found that the nutrient salt concentrations in the medium changed due to interactions with CNFs; however, this change did not affect algal growth. Based on the results of the preliminary studies, algal growth inhibition tests of TEMPO-CNFs were conducted using in vitro and in vivo fluorescence measurements, along with measurements of CNFs and ion concentrations in the test dispersions. The test results showed that no growth inhibition was observed on growth rate or yield even at the maximum CNF concentration of 100 mg/L, suggesting that the ecological effect of TEMPO-CNFs on algae was relatively low. The results of this study will be valuable for conducting ecotoxicity assessments on additional CNFs and comparable nanomaterials in future studies.

Process design for acidic and alcohol based deep eutectic solvent pretreatment and high pressure homogenization of palm bunches for nanocellulose production

This research aimed to study on nanocellulose production from palm bunch using process design and cost analysis. Choline chloride based deep eutectic solvent pretreatment was selected for high-purity cellulose separation at mild condition, followed by nano-fibrillation using mechanical treatment. Three types of choline chloride-based deep eutectic solvents employing different hydrogen-bond donors (HBDs) namely lactic acid, 1,3-butanediol and oxalic acid were studied. The optimal cellulose extraction condition was choline chloride/lactic acid (ChLa80C) pretreatment of palm empty bunch at 80 °C followed by bleaching yielding 94.96%w/w cellulose content in product. Size reduction using ultrasonication and high-pressure homogenization produced nanocellulose at 67.12%w/w based on cellulose in raw material. Different morphologies of nanocellulose were tunable in the forms of nanocrystals, nano-rods and nanofibers by using dissimilar deep eutectic solvents. This work offered a sustainable and environmentally friendly process as well as provided analysis of DES pretreatment and overview operating cost for nanocellulose production. Application of nanocellulose for the fabrication of highly functional and biodegradable material for nanomedicine, electronic, optical, and micromechanical devices is achievable in the near future.

Aloe vera gel relieves cadmium triggered hepatic injury via antioxidative, anti-inflammatory, and anti-apoptotic routes

Aloe vera (AV) gel extracted from fresh AV leaves was chosen in this study to evaluate its antioxidant, anti-inflammatory, and antiapoptotic activities against cadmium (Cd) -induced liver injury. Forty Wistar male adult rats were equally divided into four groups. Group I (standard control) ingested with 2.5 ml/kg b.w. of physiological saline. Group II (Cd-intoxicated) received 3 mg/kg b.w./day of CdCl2 dissolved in saline. Group III (AV) received 200 mg/kg b.w./day of AV gel dissolved in saline. Group IV (Cd+AV) ingested with 200 mg/kg b.w./day of AV gel solution along with 3 mg/kg b.w. CdCl2. All groups were ingested orally by gavage for 3 consecutive weeks. Paraoxonase-1 (PON-1) and HSP70 were measured in serum. The deposited Cd level, nitric oxide content, lipid peroxidation, collagen-1 (COL-1), and metalloproteinase-9 (MMP-9) levels were all determined in liver tissue homogenates. Gene expression of NF-κB and IL-6, Bax, and Bcl2, as well as immunohistochemistry analysis of activated caspase-3, was performed. Results showed that ingestion of AV gel greatly relieved all oxidative stress due to Cd exposure, modulated the NF-κB, IL-6, Bax, and Bcl2 expression levels, and improved the apoptotic state. In conclusion, AV gel confirmed its potential ameliorating effect against liver injury induced due to Cd exposure.

Engineering strong man-made cellulosic fibers: a review of the wet spinning process based on cellulose nanofibrils

With the goal of sustainable development, manufacturing continuous high-performance fibers based on sustainable resources is an emerging research direction. However, compared to traditional synthetic fibers, plant fibers have limited length/diameter and uncontrollable natural defects, while regenerated cellulose fibers such as viscose and Lyocell suffer from inferior mechanical properties. Wet-spun fibers based on nanocelluloses especially cellulose nanofibrils (CNFs) offer superior mechanical performance since CNFs are the fundamental high-performance building blocks of plant cell walls. This review aims to summarize the progress of making CNF wet-spun fibers, emphasizing on the whole wet spinning process including spinning suspension preparation, spinning, coagulation, washing, drying and post-stretching steps. By establishing the relationships between the nano-scale assembling structure and the macroscopic changes in the CNF dope from gels to dried fibers, effective methods and strategies to improve the mechanical properties of the final fibers are analyzed and proposed. Based on this, the opportunities and challenges for potential industrial-scale production are discussed.

Regioselectively Carboxylated Cellulose Nanofibril Models from Dissolving Pulp: C6 via TEMPO Oxidation and C2,C3 via Periodate-Chlorite Oxidation

Regioselective C6 and C2,C3 carboxylated cellulose nanofibrils (CNFs) have been robustly generated from dissolving pulp, a readily available source of unmodified cellulose, via stoichiometrically optimized 2,2,6,6-tetramethylpyperidine-1-oxyl (TEMPO)-mediated and sequential sodium periodate-sodium chlorite (PC) oxidation coupled with high-speed blending. Both regioselectively optimized carboxylated CNF series possess the widest ranges of comparable charges (0.72-1.48 mmol/g for T-CNFs vs. 0.72-1.10 mmol/g for PC-CNFs), but similar ranges of thickness (1.3-2.4 nm for T-CNF, 1.8-2.7 nm PC-CNF), widths (4.6-6.6 nm T-CNF, 5.5-5.9 nm PC-CNF), and lengths (254-481 nm T-CNF, 247-442 nm PC-CNF). TEMPO-mediated oxidation is milder and one-pot, thus more time and process efficient, whereas the sequential periodate-chlorite oxidation produces C2,C3 dialdehyde intermediates that are amenable to further chemical functionalization or post-reactions. These two well-characterized regioselectively carboxylated CNF series represent coherent cellulose nanomaterial models from a single woody source and have served as references for their safety study toward the development of a safer-by-design substance evaluation tool.

Recent advances in TEMPO-oxidized cellulose nanofibers: Oxidation mechanism, characterization, properties and applications

Cellulose is the richest renewable polymer source on the earth. TEMPO-mediated oxidized cellulose nanofibers are deduced from enormously available wood biomass and functionalized with carboxyl groups. The preparation procedure of TOCNFs is more environmentally friendly compared to other cellulose, for example, MFC and CNCs. Due to the presence of functional carboxyl groups, TOCNF-based materials have been studied widely in different fields, including biomedicine, wastewater treatment, bioelectronics and others. In this review, the TEMPO oxidation mechanism, the properties and applications of TOCNFs are elaborated. Most importantly, the recent advanced applications and the beneficial role of TOCNFs in the various abovementioned fields are discussed. Furthermore, the performances and research progress on the fabrication of TOCNFs are summarized. It is expected that this timely review will help further research on the invention of novel material from TOCNFs and its applications in different advanced fields, including biomedicine, bioelectronics, wastewater treatment, and the energy sector.

Biotechnological innovations in nanocellulose production from waste biomass with a focus on pineapple waste

New materials' synthesis and utilization have shown many critical challenges in healthcare and other industrial sectors as most of these materials are directly or indirectly developed from fossil fuel resources. Environmental regulations and sustainability concepts have promoted the use of natural compounds with unique structures and properties that can be biodegradable, biocompatible, and eco-friendly. In this context, nanocellulose (NC) utility in different sectors and industries is reported due to their unique properties including biocompatibility and antimicrobial characteristics. The bacterial nanocellulose (BNC)-based materials have been synthesized by bacterial cells and extracted from plant waste materials including pineapple plant waste biomass. These materials have been utilized in the form of nanofibers and nanocrystals. These materials are found to have excellent surface properties, low density, and good transparency, and are rich in hydroxyl groups for their modifications to other useful products. These materials are well utilized in different sectors including biomedical or health care centres, nanocomposite materials, supercapacitors, and polymer matrix production. This review explores different approaches for NC production from pineapple waste residues using biotechnological interventions, approaches for their modification, and wider applications in different sectors. Recent technological developments in NC production by enzymatic treatment are critically discussed. The utilization of pineapple waste-derived NC from a bioeconomic perspective is summarized in the paper. The chemical composition and properties of nanocellulose extracted from pineapple waste may have unique characteristics compared to other sources. Pineapple waste for nanocellulose production aligns with the principles of sustainability, waste reduction, and innovation, making it a promising and novel approach in the field of nanocellulose materials.

A new strategy to improve the dielectric properties of cellulose nanocrystals (CNCs): Surface modification of small molecules

Nanocellulose finds various applications in advanced electrical devices due to its impressive mechanical properties, thermal stability, and degradability. Cellulose nanocrystals (CNCs) with excellent dielectric properties may act as a fresh dielectric plastic. In this study, a new strategy of small molecule modification was used to improve the dielectric constant, breakdown strength, and band gap of the CNCs. The dipole moments, dipole density, and the anisotropic impact of surface groups on the dielectric constant were studied. The number of sulfates in the CNCs showed a gradient due to alkali treatment and sulfonation, which allowed for a controlled range of the dielectric constant of nanocellulose between 4.9 and 11.9. TEMPO oxidation (2,2,6,6-tetramethylpiperidine-1-oxyl) and cyanoethylation of the CNCs further increased the dielectric constant to 11.1 and 13.2, respectively, and the dielectric loss 10-1. By understanding and innovating organic polymer dielectrics, we can provide significant benefits to the electronics and device industries.

Utilization of rice production residues as a reinforcing agent in bioadhesives based on polyphenols extracted from the bark of trees from the Brazilian Cerrado biome

The scarcity of nonrenewable resources and the increase in environmental pollution have intensified the search for materials that exhibit specific characteristics and are nontoxic, renewable, and sustainable. Thus, the objective of this work was to produce natural polyphenol adhesives reinforced with rice husk and its ash to increase the mechanical resistance and moisture resistance of the glue line in wood bonded joints. Polyphenols were extracted from the bark of Stryphnodendron adstringens (Mart.) Coville (barbatimão). Adhesives were produced with a 50 % solid and 50 % liquid composition. Rice husk and husk ash underwent X-ray fluorescence analysis (XRF). Adhesives and reinforcement material were characterized by Fourier transform infrared (FTIR) and thermogravimetric analyses (TGA). The adhesives were glued in a mechanical press in specimens made of Pinus elliottii, which were subjected to shear testing of the wet and dry glue line. As a result, the chemical components present in rice husk and its ash positively influenced the properties of the adhesives. The mechanical glue line shear test showed that the adhesive reinforced with rice husk ash did not show a statistically significant difference. However, natural adhesives based on polyphenols from barbatimão strengthened with rice husk and ash showed improved properties, demonstrating how much it pays to use the residue of rice production to reinforce the matrix of tannin adhesives. Thus, it can be determined that reinforcement with rice husk and ash is efficient in improving some properties of natural adhesives based on polyphenols.

Devisable pore structures and tunable thermal management properties of aerogels composed of carbon nanotubes and cellulose nanofibers with various aspect ratios

The anisotropic cellulose nanofiber (CNF)/carbon nanotube (CNT) aerogels hold a great promise in directional applications due to their distinct xylem-like aligned penetrating pore structures. The aspect ratio of CNF plays a crucial role in the pore structures of aerogels, directly dominating the final macroscopic properties of materials. Herein, three types of CNF with different aspect ratios were extracted through the 2,2,6,6-tetrmethylpiperidine-1-oxyl radical (TEMPO) oxidation process by changing the doses of oxidant. The corresponding anisotropic CNF/CNT aerogels were prepared by the unidirectional freeze-drying method and then their pore morphologies and properties were investigated in detail. The resulting aerogel with the shortest aspect ratio of CNF exhibited the densest porous structure, thereby obtaining the highest compressive strength of 110 kPa and elastic modulus of 383 kPa, while that containing the longest CNF possessed the highest thermal conductivity coefficient of 0.17 W m-1 K-1 and the worst thermal insulation. This research explored the relationship between the properties of the CNF/CNT aerogels and devisable pore structures caused by various aspect ratios of CNF, thus providing a new insight into the development of CNF/CNT aerogels with tunable performances.

Rheology in Product Development: An Insight into 3D Printing of Hydrogels and Aerogels

Rheological characterisation plays a crucial role in developing and optimising advanced materials in the form of hydrogels and aerogels, especially if 3D printing technologies are involved. Applications ranging from tissue engineering to environmental remediation require the fine-tuning of such properties. Nonetheless, their complex rheological behaviour presents unique challenges in additive manufacturing. This review outlines the vital rheological parameters that influence the printability of hydrogel and aerogel inks, emphasising the importance of viscosity, yield stress, and viscoelasticity. Furthermore, the article discusses the latest developments in rheological modifiers and printing techniques that enable precise control over material deposition and resolution in 3D printing. By understanding and manipulating the rheological properties of these materials, researchers can explore new possibilities for applications such as biomedicine or nanotechnology. An optimal 3D printing ink requires strong shear-thinning behaviour for smooth extrusion, forming continuous filaments. Favourable thixotropic properties aid viscosity recovery post-printing, and adequate yield stress and G' are crucial for structural integrity, preventing deformation or collapse in printed objects, and ensuring high-fidelity preservation of shapes. This insight into rheology provides tools for the future of material design and manufacturing in the rapidly evolving field of 3D printing of hydrogels and aerogels.

Structural Color from Cellulose Nanocrystals or Chitin Nanocrystals: Self-Assembly, Optics, and Applications

Widespread concerns over the impact of human activity on the environment have resulted in a desire to replace artificial functional materials with naturally derived alternatives. As such, polysaccharides are drawing increasing attention due to offering a renewable, biodegradable, and biocompatible feedstock for functional nanomaterials. In particular, nanocrystals of cellulose and chitin have emerged as versatile and sustainable building blocks for diverse applications, ranging from mechanical reinforcement to structural coloration. Much of this interest arises from the tendency of these colloidally stable nanoparticles to self-organize in water into a lyotropic cholesteric liquid crystal, which can be readily manipulated in terms of its periodicity, structure, and geometry. Importantly, this helicoidal ordering can be retained into the solid-state, offering an accessible route to complex nanostructured films, coatings, and particles. In this review, the process of forming iridescent, structurally colored films from suspensions of cellulose nanocrystals (CNCs) is summarized and the mechanisms underlying the chemical and physical phenomena at each stage in the process explored. Analogy is then drawn with chitin nanocrystals (ChNCs), allowing for key differences to be critically assessed and strategies toward structural coloration to be presented. Importantly, the progress toward translating this technology from academia to industry is summarized, with unresolved scientific and technical questions put forward as challenges to the community.

Nanostructured Cellulose-Based Aerogels: Influence of Chemical/Mechanical Cascade Processes on Quality Index for Benchmarking Dye Pollutant Adsorbents in Wastewater Treatment

(1) Background: Nanostructured cellulose has emerged as an efficient bio-adsorbent aerogel material, offering biocompatibility and renewable sourcing advantages. This study focuses on isolating (ligno)cellulose nanofibers ((L)CNFs) from barley straw and producing aerogels to develop sustainable and highly efficient decontamination systems. (2) Methods: (Ligno)cellulose pulp has been isolated from barley straw through a pulping process, and was subsequently deconstructed into nanofibers employing various pre-treatment methods (TEMPO-mediated oxidation process or PFI beater mechanical treatment) followed by the high-pressure homogenization (HPH) process. (3) Results: The aerogels made by (L)CNFs, with a higher crystallinity degree, larger aspect ratio, lower shrinkage rate, and higher Young's modulus than cellulose aerogels, successfully adsorb and remove organic dye pollutants from wastewater. (L)CNF-based aerogels, with a quality index (determined using four characterization parameters) above 70%, exhibited outstanding contaminant removal capacity over 80%. The high specific surface area of nanocellulose isolated using the TEMPO oxidation process significantly enhanced the affinity and interactions between hydroxyl and carboxyl groups of nanofibers and cationic groups of contaminants. The efficacy in adsorbing cationic dyes in wastewater onto the aerogels was verified by the Langmuir adsorption isotherm model. (4) Conclusions: This study offers insights into designing and applying advanced (L)CNF-based aerogels as efficient wastewater decontamination and environmental remediation platforms.

Anionic nanocellulose as competing agent in microbial DNA extraction from mine process samples

Microorganisms in flotation and minerals processing may significantly affect the grade and yield of metal concentrates. However, studying the phenomena requires working techniques to detach microorganisms and their DNA from mineral particles to which they strongly adhere. We developed a new method utilizing the competitive properties of anionic nanocellulose to block sorption of DNA to and detach microbial cells from mineral particles from ore processing. In general, up to one ng DNA mL-1 sample was obtained with the custom anionic nanocellulose method (CM) compared to DNA amounts below the Qubit assay's detection limit for extractions with a commercial kit (KIT). Similarly, 0.5-4 orders of magnitude more bacterial 16S and fungal 5.8S rRNA gene copies were detected by qPCR from CM treated samples compared to KIT extractions. A clear difference in the detected microbial community structure between CM and KIT extracted samples was also observed. Commercial kits optimized for mineral soils are easy to use and time efficient but may miss a considerable part of the microbial communities. A competing agent such as anionic nanocellulose may decrease the interaction between microorganisms or their DNA and minerals and provide a comprehensive view into the microbial communities in mineral processing environments.

Contaminant microorganisms in the in vitro evaluation of cellular responses of cellulose nanofibers and their microbial inactivation using gamma irradiation

Cellulose nanofibers (CNFs) are fibrous nanomaterials produced from plants. Since some nanomaterials are toxic, toxicity evaluation, including in vitro examinations using cultured cells, is essential for the effective use of CNFs. On the other hand, microorganisms in the environment can contaminate CNF suspensions. The contamination of CNF samples and the effects of contaminating microorganisms on in vitro examinations were investigated in this study. Microorganism contamination in CNF samples was examined, and microbial inactivation of CNF suspensions using gamma irradiation was evaluated. After gamma-ray irradiation at absorbed doses of 0.5, 1, 5, and 10 kGy, the cellular effects of CNF suspensions were examined using 6 types of cultured cell, HaCaT, A549, Caco-2, MeT-5A, THP-1, and NR8383 cells. CNF samples were contaminated with bacteria and CNF suspensions exhibited endotoxin activity. Gamma irradiation effectively inactivated the microorganisms contained in the CNF suspensions. When the absorbed dose was 10 kGy, the fiber length of CNF was shortened, but the effect on CNF was small at 1.0 kGy or less. CNF suspensions showed lipopolysaccharides (LPS)-like cellular responses and strongly induced interleukin-8, especially in macrophages. Absorbed doses of at least 10 kGy did not affect the LPS-like activity. In this study, it was shown that the CNF suspension may be contaminated with microorganisms. Gamma irradiation was effective for microbial inactivation of suspension for invitor toxicity evaluation of CNF. In vitro evaluation of CNFs requires attention to the effects of contaminants such as LPS.

Bioinspired mechanically stable all-polysaccharide based scaffold for photosynthetic production

We demonstrate the construction of water-stable, biocompatible and self-standing hydrogels as scaffolds for the photosynthetic production of ethylene using a bioinspired all-polysaccharidic design combining TEMPO-oxidised cellulose nanofibers (TCNF) and a cereal plant hemicellulose called mixed-linkage glucan (MLG). We compared three different molecular weight MLGs from barley to increase the wet strength of TCNF hydrogels, and to reveal the mechanisms defining the favourable interactions between the scaffold components. The interactions between MLGs and TCNF were revealed via adsorption studies and interfacial rheology investigations using quartz crystal microbalance with dissipation monitoring (QCM-D). Our results show that both the MLG solution stability and adsorption behaviour did not exactly follow the well-known polymer adsorption and solubility theories especially in the presence of co-solute ions, in this case nitrates. We prepared hydrogel scaffolds for microalgal immobilisation, and high wet strength hydrogels were achieved with very low dosages of MLG (0.05 wt%) to the TCNF matrix. The all-polysaccharic biocatalytic architectures remained stable and produced ethylene for 120 h with yields comparable to the state-of-the-art scaffolds. Due to its natural origin and biodegradability, MLG offers a clear advantage in comparison to synthetic scaffold components, allowing the mechanical properties and water interactions to be tailored.

Characterizing lignin-containing microfibrillated cellulose based on water interactions, fibril properties, and imaging

Morphological characterization of microfibrillated cellulose (MFC) is critically important to process control in production and product specification for trade and product development yet is extremely difficult. This study evaluated several indirect methods for relative comparison of the morphology of lignin-free and lignin-containing ((L)MFCs). The (L)MFCs studied were produced using a commercial grinder through different passes from a dry lap bleached kraft eucalyptus pulp, a virgin mixed (maple and birch) unbleached kraft hardwood pulp, and two virgin-unbleached kraft softwood (loblolly pine) pulps with one bleachable grade (low lignin content) and one liner grade (high lignin content). The (L)MFCs were indirectly characterized using techniques based on water interactions, i.e., water retention value (WRV) and fibril suspension stability, as well as fibril properties, i.e., cellulose crystallinity and fine content. Optical microscopy and scanning electron microscopy were also applied to directly visualize the (L)MFCs to provide some objective measure of the morphology of the (L)MFCs. The results indicate that most measures such as WRV, cellulose crystallinity, fine content cannot be used to compare (L)MFCs from different pulp fibers. Measures based on water interactions such as (L)MFC WRV and suspension stability appeared can provide some degree of indirect assessment. This study provided the utilities and limits of these indirect methods for relative comparison of the morphologies of (L)MFCs.

Evaporative Dry Powders Derived from Cellulose Nanofiber Organogels to Fully Recover Inherent High Viscosity and High Transparency of Water Dispersion

Water containing low amounts of cellulose nanofiber (CNF) is widely used as a thickening agent owing to its three unique properties: high transparency, viscosity, and controllable viscosity based on the shear rate. CNF dry powders are used to reduce the transportation and storage costs or expand applications as a thickening agent. Herein, the preparation of CNF dry powders that can be used to obtain redispersions while maintaining the aforementioned properties is reported. In this regard, the dehydration and vaporization procedures for a CNF water dispersion without using additives are discussed. When dry powders are prepared by removing water by boiling, their redispersions do not exhibit all their unique properties because of dense aggregations. However, when their redispersions are vigorously stirred to break the dense aggregations, they become transparent, although they do not recover their initial viscosity. Freeze-dried powders recover all their initial properties after redispersion. Nevertheless, their large volume does not reduce the transportation and storage costs. When the liquid is evaporated from the solvent-exchanged CNF organogels, their redispersions also fully recover all their properties. Furthermore, the evaporative dry powders with dense small volumes and good handling contribute to reducing the transportation and storage costs.

Tunable poly(lauryl methacrylate) surface grafting via SI-ATRP on a one-pot synthesized cellulose nanofibril macroinitiator core as a shear-thinning rheology modifier and drag reducer

The optimally one-pot synthesized 2-bromoproponyl esterified cellulose nanofibril (Br-CNF) has been validated as a robust macroinitiator for self-surface-initiated atom transfer radical polymerization (SI-ATRP) of lauryl methacrylate (LMA) in tunable graft lengths and high conversions of up to 92.7%. SI-ATRP of LMA surface brushes on Br-CNF followed first order kinetics in lengths at up to 46 degree of polymerization (DP) based on mass balance or 31 DP by solution-state 1H NMR in DMSO-d6. With increasing PLMA graft lengths, Br-CNF-g-PLMA cast films exhibited increasing hydrophobicity with water contact angles from 80.9° to 110.6°. The novel Br-CNF-g-PLMA exhibited dual shear thinning behavior of the Br-CNF core as evident by n < 1 flow behavior index and drag reducing properties of PLMA grafts with increased viscosity at up to 21 071×. Br-CNF-g-PLMA with 46 DP could be fully dispersed in silicon pump oil to function as a drag reducer to enhance viscosity up to 5× at 25, 40, and 55 °C. The novel macroinitiator capability of Br-CNF in SI-ATRP of vinyl monomers and the bottlebrush-like LMA surface grafted Br-CNF as highly effective viscosity modifier and drag reducer further demonstrate the versatile functionality of Br-CNF beyond hydrophobic coatings and reactive polyols previously reported.

Mapping Nanocellulose- and Alginate-Based Photosynthetic Cell Factory Scaffolds: Interlinking Porosity, Wet Strength, and Gas Exchange

To develop efficient solid-state photosynthetic cell factories for sustainable chemical production, we present an interdisciplinary experimental toolbox to investigate and interlink the structure, operative stability, and gas transfer properties of alginate- and nanocellulose-based hydrogel matrices with entrapped wild-type Synechocystis PCC 6803 cyanobacteria. We created a rheological map based on the mechanical performance of the hydrogel matrices. The results highlighted the importance of Ca2+-cross-linking and showed that nanocellulose matrices possess higher yield properties, and alginate matrices possess higher rest properties. We observed higher porosity for nanocellulose-based matrices in a water-swollen state via calorimetric thermoporosimetry and scanning electron microscopy imaging. Finally, by pioneering a gas flux analysis via membrane-inlet mass spectrometry for entrapped cells, we observed that the porosity and rigidity of the matrices are connected to their gas exchange rates over time. Overall, these findings link the dynamic properties of the life-sustaining matrix to the performance of the immobilized cells in tailored solid-state photosynthetic cell factories.

Morphological Changes of Polymer-Grafted Nanocellulose during a Drying Process

Nanocellulose is emerging as a sustainable building block in materials science. Surface modification via polymer grafting has proven to be effective in tuning diverse material properties of nanocellulose, including wettability of films and the reinforcement effect in polymer matrices. Despite its widespread use in various environments, the structure of a single polymer-grafted nanocellulose remains poorly understood. Here, we investigate the morphologies of polymer-grafted CNFs at water-mica and air-mica interfaces by using all-atom molecular dynamics simulation and atomic force microscopy. We show that the morphologies of the polymer-grafted CNFs undergo a marked change in response to the surrounding environment due to variations in the conformation of the surface polymer chains. Our results provide novel insights into the molecular structure of polymer-grafted CNFs and can facilitate the design and development of innovative biomass-based nanomaterials.

Nanocellulose-Based Hollow Fibers for Advanced Water and Moisture Management

Natural plant fibers such as cotton have favorable performance in water and moisture management; however, they suffer from inferior processing ability due to limited diameter and length, as well as natural defects. Although commercially available regenerated cellulose fibers such as lyocell fibers can have tunable structures, they rely on the complete dissolution of cellulose molecules, including the highly crystalline parts, leading to inferior mechanical properties. Through a specially designed coaxial wet-spinning process, we prepare a type of hollow fiber using only cellulose nanofibrils (CNFs) as building blocks. It mimics cotton fibers with a lumen structure but with a tunable diameter and a long length. Moreover, such hollow fibers have superior mechanical properties with a Young's modulus of 24.7 GPa and tensile strength of 341 MPa, surpassing lyocell fibers and most wet-spun CNF-based fibers. Importantly, they have 10 times higher wicking ability, wetting rate, drying rate, and maximum wetting ratio compared to lyocell fibers. Together with a superior long-term performance after 500 rounds of wetting-drying tests, such CNF-based hollow fibers are sustainable choices for advanced textile applications. And this study provides a greater understanding of nanoscale building blocks and their assembled macromaterials, which may help to reveal the magic hierarchical design of natural materials, in this case, plant fibers.

Fabrication of transparent cellulose nanofibril composite film with smooth surface and ultraviolet blocking ability using hydrophilic lignin

Ecofriendly multifunctional films with only biomass-based components have gathered significant interest from researchers as next-generation materials. Following this trend, a TEMPO-oxidized cellulose nanofibril (TOCNF) film containing hydrophilic lignin (CL) was fabricated. To produce the lignin, peracetic acid oxidation was carried out, leading to the introduction of carboxyl groups into the lignin structure. By adding hydrophilic lignin, various characteristics (e.g., surface smoothness, UV protection, antimicrobial activity, and barrier properties) of the TOCNF film were enhanced. In particular, the shrinkage of CNF was successfully prevented by the addition of CL, which is attributed to the lower surface roughness (Ra) from 18.93 nm to 4.99 nm. As a result, the smooth surface of the TOCNF/CL film was shown compared to neat TOCNF film and TOCNF/Kraft lignin composite film. In addition, the TOCNF/CL film showed a superior UV blocking ability of 99.9 % with high transparency of 78.4 %, which is higher than that of CNF-lignin composite films in other research. Also, water vapor transmission rate was reduced after adding CL to TOCNF film. Consequently, the developed TOCNF/CL film can be potentially utilized in various applications, such as food packaging.

Harnessing Nature's Ingenuity: A Comprehensive Exploration of Nanocellulose from Production to Cutting-Edge Applications in Engineering and Sciences

Primary material supply is the heart of engineering and sciences. The depletion of natural resources and an increase in the human population by a billion in 13 to 15 years pose a critical concern regarding the sustainability of these materials; therefore, functionalizing renewable materials, such as nanocellulose, by possibly exploiting their properties for various practical applications, has been undertaken worldwide. Nanocellulose has emerged as a dominant green natural material with attractive and tailorable physicochemical properties, is renewable and sustainable, and shows biocompatibility and tunable surface properties. Nanocellulose is derived from cellulose, the most abundant polymer in nature with the remarkable properties of nanomaterials. This article provides a comprehensive overview of the methods used for nanocellulose preparation, structure-property and structure-property correlations, and the application of nanocellulose and its nanocomposite materials. This article differentiates the classification of nanocellulose, provides a brief account of the production methods that have been developed for isolating nanocellulose, highlights a range of unique properties of nanocellulose that have been extracted from different kinds of experiments and studies, and elaborates on nanocellulose potential applications in various areas. The present review is anticipated to provide the readers with the progress and knowledge related to nanocellulose. Pushing the boundaries of nanocellulose further into cutting-edge applications will be of particular interest in the future, especially as cost-effective commercial sources of nanocellulose continue to emerge.

Clearly transparent and air-permeable nanopaper with porous structures consisting of TEMPO-oxidized cellulose nanofibers

Optically transparent materials that are air permeable have potentially numerous applications, including in wearable devices. From the perspective of sustainable development, 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-oxidized cellulose nanofibers with widths of 3-4 nm have attracted considerable attention as starting materials for the preparation of clearly transparent nanofiber paper (denoted as conventional nanopaper). However, conventional nanopaper that is prepared from a water dispersion of TEMPO-oxidized cellulose nanofibers by direct drying exhibits poor air permeability owing to its densely packed layered structure. In this study, we prepared a clearly transparent and air-permeable nanopaper by applying filtration-based solvent exchange from high-surface-tension water to low-surface-tension ethanol and hexane, followed by drying under continuous vacuum filtration. The resulting hexane-exchanged nanopaper had a porous structure with individually dispersed and thin nanofiber networks and interlayer pore spaces. Owing to the tailored porous structures, the hexane-exchanged nanopaper provides similar clear transparency (total light transmittance and haze at 600 nm: 92.9% and 7.22%, respectively) and 10⁶ times higher air permeability (7.8 × 10⁶ mL μm m^-2 day^-1 kPa^-1) compared to the conventional nanopaper. This study will facilitate the development of clearly transparent and air-permeable nanopapers to extend their functional applications.

TEMPO-Oxidized Cellulose Nanofibril Films Incorporating Graphene Oxide Nanofillers

To design a new system of novel TEMPO-oxidized cellulose nanofibrils (TOCNs)/graphene oxide (GO) composite, 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO)-mediated oxidation was utilized. For the better dispersion of GO into the matrix of nanofibrillated cellulose (NFC), a unique process combining high-intensity homogenization and ultrasonication was adopted with varying degrees of oxidation and GO percent loadings (0.4 to 2.0 wt%). Despite the presence of carboxylate groups and GO, the X-ray diffraction test showed that the crystallinity of the bio-nanocomposite was not altered. In contrast, scanning electron microscopy showed a significant morphological difference in their layers. The thermal stability of the TOCN/GO composite shifted to a lower temperature upon oxidation, and dynamic mechanical analysis signified strong intermolecular interactions with the improvement in Young's storage modulus and tensile strength. Fourier transform infrared spectroscopy was employed to observe the hydrogen bonds between GO and the cellulosic polymer matrix. The oxygen permeability of the TOCN/GO composite decreased, while the water vapor permeability was not significantly affected by the reinforcement with GO. Still, oxidation enhanced the barrier properties. Ultimately, the newly fabricated TOCN/GO composite through high-intensity homogenization and ultrasonification can be utilized in a wide range of life science applications, such as the biomaterial, food, packaging, and medical industries.

Production of nanocellulose using acidic deep eutectic solvents based on choline chloride and carboxylic acids: A review

Nowadays, nanocellulose production processes with numerous merits of green, eco-friendly, and cost-effective are in urgent need. Acidic deep eutectic solvent (ADES), as an emerging green solvent, has been widely applied in the preparation of nanocellulose over the past few years, owing to its unique advantages, including non-toxicity, low cost, easy synthesis, recyclability, and biodegradability. At present, several studies have explored the effectiveness of ADESs in nanocellulose production, particularly those based on choline chloride (ChCl) and carboxylic acids. Various acidic deep eutectic solvents have been employed, with representative ones such as ChCl-oxalic/lactic/formic/acetic/citric/maleic/levulinic/tartaric acid. Herein, we comprehensively reviewed the latest progress of these ADESs, focusing on the treatment procedures and key superiorities. In addition, the challenges and outlooks of ChCl/carboxylic acids-based DESs implementation in the fabrication of nanocellulose were discussed. Finally, some suggestions were proposed to advance the industrialization of nanocellulose, which would help for the roadmap of sustainable and large-scale production of nanocellulose.

Integrated enzyme hydrolysis assisted cellulose nanofibril (CNF) fabrication: A sustainable approach to paper mill sludge (PMS) management

The landfilling of paper mill sludge (PMS) has been restricted or even banned in many countries due to the raised concern about greenhouse gas (GHG) emissions and contamination of the soil and water, calling for a sustainable PMS management approach. The potential valorization of PMS to nanomaterials combined with traditional biorefinery was examined in this work. Three types of PMS-derived cellulose nanofibrils (CNFs) were prepared and evaluated: enzymatically assisted CNF (AU: with in-house produced enzyme and CT: with commercial enzyme), mechanically pretreated CNF (BT), and chemically pretreated CNF by TEMPO oxidation (TEMPO). It was found that enzyme-assisted mechanical fibrillation-derived CNFs had a comparable average diameter (27.9 nm for AU and 22.7 nm for CT) with that produced from mechanical pretreatment (26.5 nm for BT) and TEMPO oxidation pretreatment (20.0 nm for TEMPO), and they showed the best drainage properties among the three types of CNF. The CNFs resulting from enzymatic pretreatment reduced 15% of energy consumption compared to the mechanical method and had better thermostability than TEMPO oxidation method. In addition, the on-site produced enzyme showed similar performance to the commercial enzymes towards the CNF properties. These findings provide new insights into a promising integrated strategy in engineering CNF from PMS with on-site enzyme production as a novel and sustainable approach for PMS management and valorization.

Fabrication of bio-inspired anisotropic structures from biopolymers for biomedical applications: A review

The anisotropic features play indispensable roles in regulating various life activities in different organisms. Increasing efforts have been made to learn and mimic various tissues' intrinsic anisotropic structure or functionality for broad applications in different areas, especially in biomedicine and pharmacy. This paper discusses the strategies for fabricating biomaterials using biopolymers for biomedical applications with the case study analysis. Biopolymers, including different polysaccharides, proteins, and their derivates, that have been confirmed with sound biocompatibility for different biomedical applications are summarized, with a special focus on nanocellulose. Advanced analytical techniques for understanding and characterizing the biopolymer-based anisotropic structures for various biomedical applications are also summarized. Challenges still exist in precisely constructing biopolymers-based biomaterials with anisotropic structures from molecular to macroscopic levels and fitting the dynamic processes in native tissue. It is foreseeable that with the advancement of biopolymers' molecular functionalization, biopolymer building block orientation manipulation strategies, and structural characterization techniques, developing anisotropic biopolymer-based biomaterials for different biomedical applications would significantly contribute to a friendly disease-curing and healthcare experience.

Different amount of carboxyl-aldehyde fractionated nanofibril cellulose and main characteristics of chitosan, gelatin, alginate added composites

In this research, two different types of nanofibrillated celluloses (NFCs) having different amounts of aldehyde and carboxyl groups were mixed with chitosan (CH), gelatin (GL), and alginate (AL) with different mixing ratios to produce biocomposite aerogels. There was no related study in the literature about producing aerogels with the addition of NC and mentioning biopolymers in addition to the effect of carboxyl and aldehyde fraction of the main matrix NC on composite properties. For this purpose, the main aim of this study was to investigate how carboxyl and aldehyde groups affect the basic characteristics of NFC-biopolymer based materials addition to efficiency of biopolymer amount in main matrix. Even after preparing homogenous NC-biopolymer compositions at 1 % concentration with varied proportions (75 %-25 %, 50 %-50 %, 25 %-75 %, 100 %), aerogels were still made using the fundamentally easy lyophilization procedure. Porosity values for NC-Chitosan (NC/CH) based aerogels range from 97.85 to 99.84 %, whereas those made from NC-Gelatin (NC/GL) and NC-Alginate (NC-AL) have values of 99.2-99.8 % and 98.47 to 99.7 %, respectively. In addition, densities were determined in the range of 0.01 g/cm³ for both NC-CH and NC-GL composites, but higher values were obtained in ranged between 0.01 and 0.03 g/cm³ for NC-AL samples. The crystallinity index values showed a decreasing trend with the addition of biopolymers into NC composition. SEM images showed that all materials have a porous micro structure with different size pores and homogenous surface topography. As a result of the specified tests, these materials can be used in many different industrial applications, such as dust collectors, liquid adsorbers, specific material for packaging and medical materials.

Natural Pyranosyl Materials: Potential Applications in Solid-State Batteries

Solid-state batteries have become one of the hottest research areas today, due to the use of solid-state electrolytes enabling the high safety and energy density. Because of the interaction with electrolyte salts and the abundant ion transport sites, natural polysaccharide polymers with rich functional groups such as -OH, -OR or -COO^- etc. have been applied in solid-state electrolytes and have the merits of possibly high ionic conductivity and sustainability. This review summarizes the recent progress of natural polysaccharides and derivatives for polymer electrolytes, which will stimulate further interest in the application of polysaccharides for solid-state batteries.

Large-Scale Preparation of Carboxylated Cellulose Nanocrystals and Their Application for Stabilizing Pickering Emulsions

Cellulose nanocrystals (CNCs) with varied unique properties have been widely used in emulsions, nanocomposites, and membranes. However, conventional CNCs for industrial use were usually prepared through acid hydrolysis or heat-controlled methods with sulfuric acid. This most commonly used acid method generally suffers from low yields, poor thermal stability, and potential environmental pollution. Herein, we developed a high-efficiency and large-scale preparation strategy to produce carboxylated cellulose nanocrystals (Car-CNCs) via carboxymethylation-enhanced ammonium persulfate (APS) oxidation. After carboxymethylation, the wood fibers could form unique "balloon-like" structures with abundant exposed hydroxy groups, which facilitated exfoliating fibril bundles into individual nanocrystals during the APS oxidation process. The production process under controlled temperature, time period, and APS concentrations was optimized and the resultant Car-CNCs exhibited a typical structure with narrow diameter distributions. In particular, the final Car-CNCs exhibited excellent thermal stability (≈346.6 °C) and reached a maximum yield of 60.6%, superior to that of sulfated cellulose nanocrystals (Sul-CNCs) prepared by conventional acid hydrolysis. More importantly, compared to the common APS oxidation, our two-step collaborative process shortened the oxidation time from more than 16 h to only 30 min. Therefore, our high-efficiency method may pave the way for the up-scaled production of carboxylated nanocrystals. More importantly, Car-CNCs show potential for stabilizing Pickering emulsions that can withstand changeable environments, including heating, storage, and centrifugation, which is better than the conventional Sul-CNC-based emulsions.

A Flexible and Highly Sensitive Pressure Sense Electrode Based on Cotton Pulp for Wearable Electronics

Flexible pressure sensors with high sensitivity have great potential applications in wearable electronics. However, it is still a great challenge to prepare sense electrodes with high flexibility, high sensitivity, and high electrochemical performance. Here, we propose a novel and simple method for carbonizing cotton fibers as excellent electrically conductive materials. Moreover, carbonized cotton fiber (CCF) and polydimethylsiloxane (PDMS) were assembled into a flexible sense electrode. The CCF/PDMS electrode shows a high sensitivity of 10.8 kPa^-1, a wide response frequency from 0.2-2.0 Hz, and durability over 900 cycles. The combined CCF/PDMS sensors can monitor human movement and pulse vibration, showing the enormous potential for use in wearable device technology. Additionally, the CCF/PDMS can be used as electrodes with a specific capacitance of 332.5 mF cm^-2 at a current density of 5 mA cm^-2, thanks to their high electrical conductivity and hydrophilicity, demonstrating the promising prospect of flexible supercapacitors.

Tailoring Functionality of Nanocellulose: Current Status and Critical Challenges

Nanocellulose (NC) isolated from natural cellulose resources, which mainly includes cellulose nanofibril (CNF) and cellulose nanocrystal (CNC), has garnered increased attention in recent decades due to its outstanding physical and chemical properties. Various chemical modifications have been developed with the aim of surface-modifying NC for highly sophisticated applications. This review comprehensively summarizes the chemical modifications applied to NC so far in order to introduce new functionalities to the material, such as silanization, esterification, oxidation, etherification, grafting, coating, and others. The new functionalities obtained through such surface-modification methods include hydrophobicity, conductivity, antibacterial properties, and absorbability. In addition, the incorporation of NC in some functional materials, such as films, wearable sensors, cellulose nanospheres, aerogel, hydrogels, and nanocomposites, is discussed in relation to the tailoring of the functionality of NC. It should be pointed out that some issues need to be addressed during the preparation of NC and NC-based materials, such as the low reactivity of these raw materials, the difficulties involved in their scale-up, and their high energy and water consumption. Over the past decades, some methods have been developed, such as the use of pretreatment methods, the adaptation of low-cost starting raw materials, and the use of environmentally friendly chemicals, which support the practical application of NC and NC-based materials. Overall, it is believed that as a green, sustainable, and renewable nanomaterial, NC is will be suitable for large-scale applications in the future.

The Colloidal Properties of Nanocellulose

Nanocelluloses are anisotropic nanoparticles of semicrystalline assemblies of glucan polymers. They have great potential as renewable building blocks in the materials platform of a more sustainable society. As a result, the research on nanocellulose has grown exponentially over the last decades. To fully utilize the properties of nanocelluloses, a fundamental understanding of their colloidal behavior is necessary. As elongated particles with dimensions in a critical nanosize range, their colloidal properties are complex, with several behaviors not covered by classical theories. In this comprehensive Review, we describe the most prominent colloidal behaviors of nanocellulose by combining experimental data and theoretical descriptions. We discuss the preparation and characterization of nanocellulose dispersions, how they form networks at low concentrations, how classical theories cannot describe their behavior, and how they interact with other colloids. We then show examples of how scientists can use this fundamental knowledge to control the assembly of nanocellulose into new materials with exceptional properties. We hope aspiring and established researchers will use this Review as a guide.

Paper-Based Humidity Sensors as Promising Flexible Devices, State of the Art, Part 2: Humidity-Sensor Performances

This review article covers all types of paper-based humidity sensor, such as capacitive, resistive, impedance, fiber-optic, mass-sensitive, microwave, and RFID (radio-frequency identification) humidity sensors. The parameters of these sensors and the materials involved in their research and development, such as carbon nanotubes, graphene, semiconductors, and polymers, are comprehensively detailed, with a special focus on the advantages/disadvantages from an application perspective. Numerous technological/design approaches to the optimization of the performances of the sensors are considered, along with some non-conventional approaches. The review ends with a detailed analysis of the current problems encountered in the development of paper-based humidity sensors, supported by some solutions.

High-strength and functional nanocellulose filaments made by direct wet spinning from low concentration suspensions

Continuous filaments obtained through the wet spinning of nanocellulose have promising mechanical properties with sustainable features. To guarantee proper spinnability for wet spinning, freshly made cellulose nanofibril (CNF) suspension needs to be concentrated to have a concentration above 1 wt%, resulting in energy- and time-consuming, and inferior mechanical properties of the final filaments owing to decreasing the CNF alignment against shear flows. In this study, a CNF spinning suspension at a low concentration (0.4 wt%) can be used right after the fibrillation process without further treatments. The effects of the concentration and re-concentrating process are studied by carefully characterizing the rheological behavior and filament solidification processes, which provides more fundamental understandings on the spinnability and CNF network formation of such colloidal CNF suspensions. Combined with a post stretching process, the final dried CNF filaments have superior mechanical properties with Young's modulus and tensile strength of 35 GPa and 567 MPa, surpassing most literature data. Moreover, different functional particles can be easily incorporated to prepare functional filaments. With facile preparation and superior properties, these CNF filaments may be suitable for advanced composite filler and special textile applications.

Cellulose Nanocrystals (CNCs) and Cellulose Nanofibers (CNFs) as Adsorbents of Heavy Metal Ions

The isolation of nanocellulose has been extensively investigated due to the growing demand for sustainable green materials. Cellulose nanocrystals (CNCs) and cellulose nanofibers (CNFs), which have the same chemical composition but have different morphology, particle size, crystallinity, and other properties depending on the precursor and the synthesis method used. In comparison, CNC particles have a short rod-like shape and have smaller particle dimensions when compared to CNF particles in the form of fibers. CNC synthesis was carried out chemically (hydrolysis method), and CNF synthesis was carried out mechanically (homogenization, ball milling, and grinding), and both can be modified because they have a large surface area and are rich in hydroxyl groups. Modifications were made to increase the adsorption ability of heavy metal ions. The Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermogravimetric (TG), and dynamic light scattering (DLS) can reveal the characteristics and morphology of CNCs and CNFs. The success and effectiveness of the heavy metal adsorption process are influenced by a few factors. These factors include adsorbent chemical structure changes, adsorbent surface area, the availability of active sites on the adsorbent’s surface, adsorption constants, heavy metal ionic size differences, pH, temperature, adsorbent dosage, and contact time during the adsorption process. In this review, we will discuss the characteristics of CNCs and CNFs synthesized from various precursors and methods, the modification methods, and the application of CNCs and CNFs as heavy metal ion adsorbents, which includes suitable isotherm and kinetics models and the effect of pH on the selectivity of various types of heavy metal ions.

Cannabis detection with solid sensors and paper-based immunoassays by conjugating antibodies to nanocellulose

Highly sensitive and specific diagnostics for cannabis usage are essential for rapid on-site screening for illicit drug usage. To improve the sensitivity of THC immunoassays, a proper immobilization of the sensing elements on the sensor substrate is critical. In this work, we demonstrated the utilization of EDC/NHS coupling chemistry with nanocellulose to obtain efficient anchor layers for the immobilization of anti-immune complex antibodies on surfaces. In our approach, the high surface-to-volume ratio, OH-group-rich surface, and high hygroscopicity of TOCNF enable efficient surface functionalization and enhance water permeation inside the nanocellulose network structure, offering a hydrophilic spacer for the sensing antibodies. THC detection was shown in both SPR (surface plasmon resonance technique) and paper-based sensing systems. In SPR, antibody immobilization and the related interactions with the target molecule complex with 1-10 μg/mL THC were followed in-situ in aqueous environment, revealing robust attachment of the antibody to the nanocellulose layer and preserved bioactivity. Additionally, quantitative THC detection was enabled on paper substrate by colorimetric means by employing labeled anti-THC Fab antibody fragments as detection antibodies. THC detection efficiency of covalently linked biointerface was superior compared to the performance of physically linked biointerface. The chemical conjugation of anti-IC to nanocellulose allowed efficient binding, whereas supramolecular conjugation led to insufficient binding, highlighting the relevance of the developed nanocellulose-based anchor layer.

A mini-review on the dielectric properties of cellulose and nanocellulose-based materials as electronic components

Cellulose-based materials have the advantages of renewable, non-toxic, flexible, and strong mechanical properties, so it of is great significance to study the dielectric properties of cellulose-based materials. In this paper, we summarized the factors influencing the dielectric properties of cellulose and nanocellulose-based dielectric and the ways to change the dielectric properties, mainly exploring the methods to improve the dielectric constant of cellulose-based dielectric materials. Cellulose and nanocellulose-based dielectric need to improve the hygroscopic property, increase the flexibility and reduce dielectric loss of the composite materials. This review summarizes the current state-of-art progress of new dielectric materials for green energy storage and flexible electronic devices.

Hydrogels from TEMPO-Oxidized Nanofibrillated Cellulose Support In Vitro Cultivation of Encapsulated Human Mesenchymal Stem Cells

Mesenchymal stem cells (MSCs) are the most prominent type of adult stem cells for clinical applications. Three-dimensional (3D) cultivation of MSCs in biomimetic hydrogels provides a more physiologically relevant cultivation microenvironment for in vitro testing and modeling, thus overcoming the limitations of traditional planar cultivation methods. Cellulose nanofibers are an excellent candidate biomaterial for synthesis of hydrogels for this application, due to their biocompatibility, tunable properties, availability, and low cost. Herein, we demonstrate the capacity of hydrogels prepared from 2,2,6,6-tetramethylpiperidine-1-oxyl -oxidized and subsequently individualized cellulose-nanofibrils to support physiologically relevant 3D in vitro cultivation of human MSCs at low solid contents (0.2-0.5 wt %). Our results show that MSCs can spread, proliferate, and migrate inside the cellulose hydrogels, while the metabolic activity and proliferative capacity of the cells as well as their morphological characteristics benefit more in the lower bulk cellulose concentration hydrogels.