Toward Greener Nanosynthesis

Support based metal incorporated layered nanomaterials for photocatalytic degradation of organic pollutants

An effective approach to producing sophisticated miniaturized and nanoscale materials involves arranging nanomaterials into layered hierarchical frameworks. Nanostructured layered materials are constructed to possess isolated propagation assets, massive surface areas, and envisioned amenities, making them suitable for a variety of established and novel applications. The utilization of various techniques to create nanostructures adorned with metal nanoparticles provides a secure alternative or reinforcement for the existing physicochemical methods. Supported metal nanoparticles are preferred due to their ease of recovery and usage. Researchers have extensively studied the catalytic properties of noble metal nanoparticles using various selective oxidation and hydrogenation procedures. Despite the numerous advantages of metal-based nanoparticles (NPs), their catalytic potential remains incompletely explored. This article examines metal-based nanomaterials that are supported by layers, and provides an analysis of their manufacturing, procedures, and synthesis. This study incorporates both 2D and 3D layered nanomaterials because of their distinctive layered architectures. This review focuses on the most common metal-supported nanocomposites and methodologies used for photocatalytic degradation of organic dyes employing layered nanomaterials. The comprehensive examination of biological and ecological cleaning and treatment techniques discussed in this article has paved the way for the exploration of cutting-edge technologies that can contribute to the establishment of a sustainable future.

Potential application of bismuth oxyiodide (BiOI) when it meets light

Bismuth oxyiodide (BiOI) is a kind of typical two-dimensional (2D) material that has been increasingly developed alongside other 2D materials such as graphene, MXenes, and transition-metal dichalcogenide. However, its potential applications have not been widely whispered compared to those of other 2D materials. Using its distinctive properties, BiOI can be used for various applications, especially when it meets sunlight and other light-related electromagnetic waves. In this present review, we discuss the developments of BiOI and challenges in the applications for photodetector and light-assisted sensors, photovoltaic devices, optoelectronic logic devices, as well as photocatalysts. We start the discussion with a basic understanding and development of BiOI, crystal structure, and its properties. The synthesis and further development, such as green synthesis and its challenges in the synthesis-suited industry, as well as device integration, are also explained together with a plausible strategy to enhance the feasibility of BiOI for those various applications. We believe that the provided discussion and perspectives will not only promote BiOI to be one of the highly considered 2D materials but can also assist recent graduates in any materials science discipline and inform the senior scientists and industrial-based stakeholders of the latest advances in bismuth oxide and mixed-anion compounds.

Extracellular synthesis of silver nanoparticle using yeast extracts: antibacterial and seed priming applicationss

The evolution and rapid spread of multidrug-resistant (MDR) bacterial pathogens have become a major concern for human health and demand the development of alternative antimicrobial agents to combat this emergent threat. Conventional intracellular methods for producing metal nanoparticles (NPs) using whole-cell microorganisms have limitations, including binding of NPs to cellular components, potential product loss, and environmental contamination. In contrast, this study introduces a green, extracellular, and sustainable methodology for the bio-materialization of silver NPs (AgNPs) using renewable resource cell-free yeast extract. These extracts serve as a sustainable, biogenic route for both reducing the metal precursor and stabilizing the surface of AgNPs. This method offers several advantages such as cost-effectiveness, environment-friendliness, ease of synthesis, and scalability. HR-TEM imaging of the biosynthesized AgNPs revealed an isotropic growth route, resulting in an average size of about ~ 18 nm and shapes ranging from spherical to oval. Further characterization by FTIR and XPS results revealed various functional groups, including carboxyl, hydroxyl, and amide contribute to enhanced colloidal stability. AgNPs exhibited potent antibacterial activity against tested MDR strains, showing particularly high efficacy against Gram-negative bacteria. These findings suggest their potential role in developing alternative treatments to address the growing threat of antimicrobial resistance. Additionally, seed priming experiments demonstrated that pre-sowing treatment with AgNPs improves both the germination rate and survival of Sorghum jowar and Zea mays seedlings. KEY POINTS: •Yeast extract enables efficient, cost-effective, and eco-friendly AgNP synthesis. •Biosynthesized AgNPs showed strong antibacterial activity against MDR bacteria. •AgNPs boost seed germination and protect against seed-borne diseases.

Bioinspired silver nanoparticle-based nanocomposites for effective control of plant pathogens: A review

Plant pathogens, including bacteria, fungi, and viruses, pose significant challenges to the farming community due to their extensive diversity, the rapidly evolving phenomenon of multi-drug resistance (MDR), and the limited availability of effective control measures. Amid mounting global pressure, particularly from the World Health Organization, to limit the use of antibiotics in agriculture and livestock management, there is increasing consideration of engineered nanomaterials (ENMs) as promising alternatives for antimicrobial applications. Studies focusing on the application of ENMs in the fight against MDR pathogens are receiving increasing attention, driven by significant losses in agriculture and critical knowledge gaps in this crucial field. In this review, we explore the potential contributions of silver nanoparticles (AgNPs) and their nanocomposites in combating plant diseases, within the emerging interdisciplinary arena of nano-phytopathology. AgNPs and their nanocomposites are increasingly acknowledged as promising countermeasures against plant pathogens, owing to their unique physicochemical characteristics and inherent antimicrobial properties. This review explores recent advancements in engineered nanocomposites, highlights their diverse mechanisms for pathogen control, and draws attention to their potential in antibacterial, antifungal, and antiviral applications. In the discussion, we briefly address three crucial dimensions of combating plant pathogens: green synthesis approaches, toxicity-environmental concerns, and factors influencing antimicrobial efficacy. Finally, we outline recent advancements, existing challenges, and prospects in scholarly research to facilitate the integration of nanotechnology across interdisciplinary fields for more effective treatment and prevention of plant diseases.

The Green Synthesis of Silver Nanoparticles from Avena fatua Extract: Antifungal Activity against Fusarium oxysporum f.sp. lycopersici

Using plant extracts as eco-friendly reducing and stabilizing agents for the synthesis of nanoparticles has gained significant attention in recent years. The current study explores the green synthesis of silver nanoparticles (AgNPs) using the Avena fatua extract and evaluates their antifungal activity against Fusarium oxysporum f.sp. lycopersici (Fol), a fungal plant pathogen. A green and sustainable approach was adopted to synthesize silver nanoparticles before these nanoparticles were employed for anti-fungal activity. The primary indication that AgNPs had formed was performed using UV-vis spectroscopy, where a strong peak at 425 nm indicated the effective formation of these nanoparticles. The indication of important functional groups acting as reducing and stabilizing agents was conducted using the FTIR study. Additionally, morphological studies were executed via SEM and AFM, which assisted with more effectively analyzing AgNPs. Crystalline behavior and size were estimated using powder XRD, and it was found that AgNPs were highly crystalline, and their size ranged from 5 to 25 nm. Synthesized AgNPs exhibited significant antifungal activity against Fol at a concentration of 40 ppm. Furthermore, the inhibitory index confirmed a positive correlation between increasing AgNPs concentration and exposure duration. This study suggests that the combined phytochemical mycotoxic effect of the plant extract and the smaller size of synthesized AgNPs were responsible for the highest penetrating power to inhibit Fol growth. Moreover, this study highlights the potential of using plant extracts as reducing and capping agents for the green synthesis of AgNPs with antifungal properties. The study concludes that A. fatua extract can synthesize antifungal AgNPs as a sustainable approach with robust antifungal efficacy against Fol, underscoring their promising potential for integration into plant protection strategies.

Role of Citrullus colocynthis and Psidium guajava Mediated Green Synthesized Silver Nanoparticles in Disease Resistance against Aeromonas hydrophila Challenge in Labeo rohita

Green synthesis of metallic nanoparticles is an auspicious method of preparing nanoparticles using plant extracts that have lesser toxicity to animal cells and the host. In the present work, we analyzed the antibacterial activity of Citrullus colocynthis and Psidium guajava-mediated silver nanoparticles (Cc-AgNPs and Pg-AgNPs, respectively) against Aeromonas hydrophila (A. hydrophila) in an in vivo assay employing Labeo rohita (L. rohita). L. rohita were divided into six groups for both Cc-AgNPs and Pg-AgNPs treatments separately: Control, A. hydrophila infected, A. hydrophila + Ampicillin, A. hydrophila + Cc/Pg-AgNPs (25 µg/L), A. hydrophila + Cc/Pg-AgNPs (50 µg/L), and A. hydrophila + Cc/Pg-AgNPs (75 µg/L). Changes in different bio-indicators such as hematological, histological, oxidative stress, and cytokine analysis were observed. Interestingly, the infected fish treated with both types of AgNPs (Cc-AgNPs and Pg-AgNPs) exhibited a higher survival rate than the untreated infected fish and demonstrated signs of recovery from the infection, providing a compelling indication of the positive impact of phytosynthesized AgNPs. Disruptions in hematological and histological parameters were found in the infected fish. Both Cc-AgNPs and Pg-AgNPs showed recovery on the hematological and histological parameters. Analysis of oxidative stress and cytokine markers also revealed provoking evidence of the positive impact of Cc-AgNPs and Pg-AgNPs treatment against disease progression in the infected fish. The major finding of the study was that the higher concentrations of the nanoparticles (50 µg/L in the case of Cc-AgNPs and 75 µg/L in the case of Pg-AgNPs) were more effective in fighting against disease. In conclusion, our work presents novel insights for the use of green-synthesized AgNPs as economic and innocuous antibacterial candidates in aquaculture.

Tannic-acid-mediated synthesis and characterization of magnetite-gold nanoplatforms for photothermal therapy

Aim: The design of new hybrid nanoplatforms (HNPs) through the innovative and eco-friendly use of tannic acid (TA) for the synthesis and stabilization of the nanoplatforms. Materials & methods: The size, morphology, composition and magnetic and plasmonic properties of HNPs were investigated together with their ability to generate heat under laser irradiation and the hemotoxicity to explore their potential use for biomedical applications. Results & conclusion: The use of TA allowed the synthesis of the HNPs by adopting a simple and green method. The HNPs preserved the peculiar properties of both magnetic and plasmonic nanoparticles and did not show any hemotoxic effect.

Synthesis of Silver Nanoparticles by Leaf Extract of Cucumis melo L. and Their In Vitro Antidiabetic and Anticoccidial Activities

In this study, silver nanoparticles were synthesized using Cucumis melo L. leaf extract via a green synthesis approach and their potential against diabetes and coccidiosis was tested under in vitro conditions. The phytochemical components in the leaf extract reacted with silver nitrate in solution and yielded C. melo-silver nanoparticles (Cm-AgNPs). The synthesis of AgNPs was confirmed via UV-visible spectroscopy by obtaining a peak at 440 nm. The nanoparticles were characterized by their morphology, crystallinity, and the presence of functional groups. In vitro α-amylase and α-glucosidase inhibition assays were carried out at different concentrations in the range of 20 to 100 μg/mL of Cm-AgNPs. The Cm-AgNPs exhibited enzyme inhibitory activity in a concentration-dependent manner. As the concentration of Cm-AgNPs increased the inhibitory activities were also increased linearly and the highest inhibition was observed at 100 μg/mL. The effectiveness of Cm-AgNPs against Eimeria tenalla was assessed by an in vitro 3-(4,5-dimethylthiazolyl-2)-2,5-diphenyltetrazolium bromide (MTT) assay using Madin-Darby bovine kidney (MDBK) cell lines. The results revealed that the viability of the oocysts and further sporulation were decreased with the increased concentration of Cm-AgNPs. The AgNPs synthesized from the C. melo leaf extract have shown promising potential against diabetes and coccidiosis, and they could be used in biomedical applications.

α-Amino Acids as Reducing and Capping Agents in Gold Nanoparticles Synthesis Using the Turkevich Method

Amino acid-capped gold nanoparticles (AuNPs) are a promising tool for various applications, including therapeutics and diagnostics. Most often, amino acids are used to cap AuNPs synthesized with other reducing agents. However, only a few studies have been dedicated to using α-amino acids as reducing and capping agents in AuNPs synthesis. Hence, there are still several gaps in understanding their role in reducing gold salts. Here, we used 20 proteinogenic α-amino acids and one non-proteinogenic α-amino acid in analogy to sodium citrate as reducing and capping agents in synthesizing AuNPs using the Turkevich method. Only four of the twenty-one investigated amino acids have not yielded gold nanoparticles. The shape, size distribution, stability, and optical properties of synthesized nanoparticles were characterized by scanning electron microscopy, differential centrifugal sedimentation, the phase analysis light scattering technique, and UV-vis spectroscopy. The physicochemical characteristics of synthesized AuNPs varied with the amino acid used for the reduction. We proposed that in the initial stage of gold salts reduction most of the used α-amino acids behave similarly to citrate in the Turkevich method. However, their different physicochemical properties resulting from differences in their chemical structures significantly influence the outcomes of reactions.

Ecofriendly fabrication of cobalt nanoparticles using Azadirachta indica (neem) for effective inhibition of Candida-like fungal infection in medicated nano-coated textile

This study involves the formulation of cobalt nanoparticles by means of ethanolic Azadirachta indica (neem) extract (CoNP@N). Later, the formulated buildup was incorporated into cotton fabric in order to mitigate antifungal infection. Optimization of the formulation was carried out by considering the effect of plant concentration, temperature, and revolutions per minute (rpm) used, through design of the experiment (DOE), response surface methodology (RSM), and ANOVA of the synthetic procedure. Hence, graph was potted with the aid of effecting parameters and the related factors (size of particle and zeta potential). Further characterization of nanoparticles was performed through scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Attenuated total reflection-Fourier transform infrared (ATR-FTIR) was considered for the detection of functional groups. The structural property of CoNP@N was calculated with the aid of powder X-ray diffraction (PXRD). The surface property was measured with the use of a surface area analyzer (SAA). The values of Inhibition concentration (IC₅₀) and zone of inhibition (ZOI), were calculated, so as to determine the antifungal property against both the strains (Candida albicans, MTCC 227and Aspergillus niger, MTCC 8652). The further nano-coated cloth was subjected to a durability test, and hence the cloth was washed (through the purpose of time 0; 10; 25; and 50 washing cycles), and then its anti-fungal operation to a couple of strains was retained. Primarily, 51 μg/ml of cobalt nanoparticles incorporated on the cloth was retained but after 50 washing cycles in 500 ml of purified water, the cloth showed more efficiency contrary to C. albicans than towards A. niger.

Biosynthesis of uniform fluorescent-stable telluride quantum dots in Escherichia coli and its detection of Fe3+ in water

Quantum dots (QDs) containing zinc (Zn) and tellurium (Te) have low toxicity and excellent optoelectronic properties, which make them ideal fluorescent probes for use in environmental monitoring. However, their size/shape distribution synthesized by existing methods is not as good as that of other nanoparticles, thus limiting their application. Exploring whether this kind of QD can be biosynthesized and whether it can act as a nanoprobe are favorable attempts to expand the synthesis method and the application of QDs. Telluride QDs were biosynthesized in Escherichia coli cells. The nanoparticles were characterized by transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), energy dispersive X-ray spectroscopy (EDX), and inductively coupled plasma-atomic emission spectrometry (ICP‒AES), indicating that they were Zn₃STe₂ QDs. The QDs were monodispersed, spherical and fluorescently stable, with a uniform particle size of 3.05 ± 0.48 nm. The biosynthesis conditions of the QDs, including substrate concentrations and their process time, were optimized respectively. It was verified that the cysE and cysK genes were involved in the biosynthesis of telluride QDs. The biosynthesis ability of the QDs was improved by knocking out the tehB gene and overexpressing the pckA gene. Escherichia coli BW25113 cells that synthesized Zn₃STe₂ QDs were used as environmentally friendly fluorescent bioprobes to specifically select and quantitatively detect Fe³⁺ in water with a low limit of detection (2.62 μM). The fluorescent cells were also photobleach resistant and had good fluorescence stability. This study expands on the synthesis method of telluride QDs and the application of fluorescent probes.

Nanobiotechnological approaches in anticoagulant therapy: The role of bioengineered silver and gold nanomaterials

Nanotechnology is a novel area that has exhibited various remarkable applications, mostly in medicine and industry, due to the unique properties coming with the nanoscale size. One of the notable medical uses of nanomaterials (NMs) that attracted enormous attention recently is their significant anticoagulant activity, preventing or reducing coagulation of blood, decreasing the risk of strokes, heart attacks, and other serious conditions. Despite successful in vitro experiments, in vivo analyses are yet to be confirmed and further research is required to fully prove the safety and efficacy of nanoparticles (NPs) and to introduce them as valid alternatives to conventional ineffective anticoagulants with various shortcomings and side-effects. NMs can be synthesized through two main routes, i.e., the bottom-up route as a more preferable method, and the top-down route. In numerous studies, biological fabrication of NPs, especially metal NPs, is highly suggested given its eco-friendly approach, in which different resources can be employed such as plants, fungi, bacteria, and algae. This review discusses the green synthesis and characterization of silver nanoparticles (AgNPs) and gold nanoparticles (AuNPs) as two of the most useful metal NPs, and also their alloys in different studies focussing on their anticoagulant potential. Challenges and alternative approaches to the use of these NPs as anticoagulants have also been highlighted.

Environmental safety of nanotechnologies: The eco-design of manufactured nanomaterials for environmental remediation

Nanosafety is paramount considering the risks associated with manufactured nanomaterials (MNMs) whose implications could outweigh their advantages for environmental applications. Although nanotechnology-based solutions to implement pollution control, remediation and prevention are incremental with clear benefits for public health and Earth' natural ecosystems, nanoremediation is having a setback due to the risks associated with the safety of MNMs for humans and the environment. MNMs are diverse, work differently and bionano-interactions occurring upon environmental exposure will guide their fate and hazardous outcomes. Here we propose a new ecologically-based design strategy (eco-design) having its roots in green nanoscience and LCA that will ground on an Ecological Risk Assessment approach, which introduces the evaluation of MNMs' ecotoxicity along with their performances and efficacies at the design stage. As such, the proposed eco-design strategy will allow recognition and design-out since the very beginning of material synthesis, those hazardous peculiar features that can be hazardous to living beings and the natural environment. A more ecologically sound eco-design strategy in which nanosafety is conceptually included in MNMs design will sustain safer nanotechnologies including those for the environment as remediation by leveraging any risks for humans and natural ecosystems.

Catalytic degradation of methylene blue by biosynthesized Au nanoparticles on titanium dioxide (Au@TiO2)

The degradation of methylene blue is a critical procedure in its wastewater remediation and thus has inspired wide catalysis research with semiconductors such as titanium dioxide (TiO₂) and rare metals such as gold (Au). In this study, we report bacterial cells assisting biosynthesis for Au@TiO₂ as an efficient catalyst for the catalytic degradation of methylene blue. Multiple complementary characterization for bio-Au_x@TiO₂ evidenced the evenly distributed Au nanoparticles (NPs) on the bio-TiO₂ layers. Meanwhile, bio-Au₂@TiO₂ displayed the superior catalytic activity in the degradation of methylene blue with the highest kinetics constant (k_app) value of 0.195 min^-1. In addition, bio-Au₂@TiO₂ keeps stable catalytic activity for up to 10 cycles. The origin of the catalytic activity was investigated by the hydroxyl radical fluorescence quantitative analysis and optical band gap analysis. In the bio-Au₂@TiO₂ catalytic system, Au NPs decreased the band gap energy of TiO₂ and enabled the generation of abundant photogeneration hydroxyl radicals, resulting in an enhanced photocatalytic activity. Our microbial synthesized bio-TiO₂ and bio-Au_x@TiO₂ study would be useful for developing green synthesis catalyst technology.

Plasmonic nanogels for naked-eye sensing of food adulterants

Cellulose based nanoplasmonic sensors gained immense attention for various applications due to their advantageous physicochemical characteristics such as ease of fabrication, low density, chirality, surface functionalization and disposal. Herein, a hydrogel based nanoplasmonic sensor probe was fabricated and evaluated for the detection of melamine (MA). Plasmonic nanomaterials (AuNPs) were synthesized by the redox reaction using a dual reducing agent (β-cyclodextrin (βCD) and citrate). The physicochemical characteristics of the synthesized AuNPs were extensively determined by various spectroscopic and microscopic techniques. The colorimetric sensing of melamine (MA) was carried out in solution and hydrogel phases. Upon the addition of MA, AuNPs tend to aggregate and exhibit color changes from orange-red to purple due to surface plasmon resonance (SPR) coupling. This nanosensor probe showed high selectivity and sensitivity for detection of MA with a detection limit of 3 × 10^-7 M. Plasmonic hydrogels were prepared using the cellulose acetate (CA) polymer and optimized for stability and interaction with melamine. The βCD-citrate stabilized AuNPs showed color changes with the CA hydrogels. The hydrogel-based sensor probe exhibits similar characteristics with respect to the selective and sensitive detection of MA under optimized conditions. The fabricated nanoreactor based sensor probe has high potential for food sensor applications.

Iron Oxide-Au Magneto-Plasmonic Heterostructures: Advances in Their Eco-Friendly Synthesis

In recent years, nanotechnologies have attracted considerable interest, especially in the biomedical field. Among the most investigated particles, magnetic based on iron oxides and Au nanoparticles gained huge interest for their magnetic and plasmonic properties, respectively. These nanoparticles are usually produced starting from processes and reagents that can be the cause of potential human health and environmental concerns. For this reason, there is a need to develop simple, green, low-cost, and non-toxic synthesis methods and reagents. This review aims at providing an overview of the most recently developed processes to produce iron oxide magnetic nanoparticles, Au nanoparticles, and their magneto-plasmonic heterostructures using eco-friendly approaches, focusing the attention on the microorganisms and plant-assisted syntheses and showing the first results of the development of magneto-plasmonic heterostructures.

Silver nanoparticle synthesis and their potency against multidrug-resistant bacteria: a green approach from tissue-cultured Coleus forskohlii

Drug resistance is a major concern nowadays, and finding alternatives of the well-known antibiotic is necessary. Green nanoparticles are emerging as a tenable alternative to this with a large spectrum of activity. The present manuscript describes an eco-friendly approach for green synthesis of silver nanoparticles from both in vitro and in vivo leaf extract of Coleus forskohlii. Leaf extracts were used in synthesis of nanoparticles which were further analyzed through UV-Vis, dynamic light scattering, energy-dispersive spectroscopy, and transmission electron microscopy. Antimicrobial activity of silver nanoparticles alone, as well as crude extract of the plant itself, was carried out against eight multidrug-resistant respiratory tract infecting pathogenic strains. Satisfactory antimicrobial activities were found with nanoparticles, in vitro and in vivo leaf extracts. However, gradually higher to lower inhibition potential against pathogenic bacterial strains was found in silver nanoparticles, in vitro and in vivo leaf extracts. Seven bioactive compounds were detected in the crude extract through gas chromatography-mass spectroscopy analysis. Results revealed that nanoparticle formation occurred in a wide range of sizes (10-50 nm) and shapes (trigonal, hexagonal, spherical, rod). The diversity in size and shape of the nanoparticles makes them biologically active. Silver nanoparticle exhibits significantly better antimicrobial activities as compared to the plant extract in case of nearly all pathogens with a maximum zone of inhibition of 15.33 ± 0.94 mm where more than 12 well-known antibiotics failed to respond. Because of this broad-spectrum activity of nanoparticles as well as the leaf extracts against life-threatening microbes, it can be used as future generation drugs.

Green Route Synthesis and Characterization Techniques of Silver Nanoparticles and Their Biological Adeptness

The development of the most reliable and green techniques for nanoparticle synthesis is an emerging step in the area of green nanotechnology. Many conventional approaches used for nanoparticle (NP) synthesis are expensive, deadly, and nonenvironmental. In this new era of nanotechnology, to overcome such concerns, natural sources which work as capping and reducing agents, including bacteria, fungi, biopolymers, and plants, are suitable candidates for synthesizing AgNPs. The surface morphology and applications of AgNPs are significantly pretentious to the experimental conditions by which they are synthesized. Available scattered information on the synthesis of AgNPs comprises the influence of altered constraints and characterization methods such as FTIR, UV-vis, DLS, SEM, TEM, XRD, EDX, etc. and their properties and applications. This review focuses on all the above-mentioned natural sources that have been used for AgNP synthesis recently. The green routes to synthesize AgNPs have established effective applications in various areas, including biosensors, magnetic resonance imaging (MRI), cancer treatment, surface-enhanced Raman spectroscopy (SERS), antimicrobial agents, drug delivery, gene therapy, DNA analysis, etc. The existing boundaries and prospects for metal nanoparticle synthesis by the green route are also discussed herein.

Metallic nanoparticles for catalytic reduction of toxic hexavalent chromium from aqueous medium: A state-of-the-art review

The ever increasing concentration of toxic and carcinogenic hexavalent chromium (Cr (VI)) in various environmental mediums including water-bodies due to anthropogenic activities with rapid civilization and industrialization have become the major issue throughout the globe during last few decades. Therefore, developing new strategies for the treatment of Cr(VI) contaminated wastewaters are in great demand and have become a topical issue in academia and industry. To date, various techniques have been used for the remediation of Cr(VI) contaminated wastewaters including solvent extraction, adsorption, catalytic reduction, membrane filtration, biological treatment, coagulation, ion exchange and photo-catalytic reduction. Among these methods, the transformation of highly toxic Cr(VI) to benign Cr(III) catalyzed by metallic nanoparticles (M-NPs) with reductant has gained increasing attention in the past few years, and is considered to be an effective approach due to the superior catalytic performance of M-NPs. Thus, it is a timely topic to review this emerging technique for Cr(VI) reduction. Herein, recent development in synthesis of M-NPs based non-supported, supported, mono-, bi- and ternary M-NPs catalysts, their characterization and performance for the reduction of Cr(VI) to Cr(III) are reviewed. The role of supporting host to stabilize the M-NPs and leading to enhance the reduction of Cr(VI) are discussed. The Cr(VI) reduction mechanism, kinetics, and factors affecting the kinetics are overviewed to collect the wealthy kinetics data. Finally, the challenges and perspective in Cr(VI) reduction catalyzed by M-NPs are proposed. We believe that this review will assist the researchers who are working to develop novel M-NPs catalysts for the reduction of Cr(VI).

Multiparametric cytotoxicity assessment: the effect of gold nanoparticle ligand functionalization on SKOV3 ovarian carcinoma cell death

Gold nanoparticles (AuNP) are promising anti-cancer agents because of their modifiable properties and high biocompatibility. This study used multiple parallel analyses to investigate the cytotoxic properties of 5 nm AuNP conjugated to four different ligands with distinct surface chemistry: polyethylene glycol (PEG), trimethylammonium bromide (TMAB), 4-dimethylaminopyridine (DMAP), and carboxyl (COOH). We used a range of biochemical and high-content microscopy methods to evaluate the metabolic function, oxidative stress, cell health, cell viability, and cell morphology in SKOV3 ovarian cancer cells. Each AuNP displayed a distinct cytotoxicity profile. All AuNP species assessed exhibited signs of dose-dependent cytotoxicity when morphology, clonogenic survival, lysosomal uptake, or cell number were measured as the marker of toxicity. All particles except for AuNP-COOH increased SKOV3 apoptosis. In contrast, AuNP-TMAB was the only particle that did not alter the metabolic function or induce significant signs of oxidative stress. These results demonstrate that AuNP surface chemistry impacts the magnitude and mechanism of SKOV3 cell death. Together, these findings reinforce the important role for multiparametric cytotoxicity characterization when considering the utility of novel particles and surface chemistries.

In Situ Imaging of Catalytic Reactions on Tungsten Oxide Nanowires Connects Surface-Ligand Redox Chemistry with Photocatalytic Activity

Semiconductor nanocrystals are promising candidates for generating chemical feedstocks through photocatalysis. Understanding the role of ligands used to prepare colloidal nanocrystals in catalysis is challenging due to the complexity and heterogeneity of nanocrystal surfaces. We use in situ single-molecule fluorescence imaging to map the spatial distribution of active regions along individual tungsten oxide nanowires before and after functionalizing them with ascorbic acid. Rather than blocking active sites, we observed a significant enhancement in activity for photocatalytic water oxidation after treatment with ascorbic acid. While the initial nanowires contain inactive regions dispersed along their length, the functionalized nanowires show high uniformity in their photocatalytic activity. Spatial colocalization of the active regions with their surface chemical properties shows that oxidation of ascorbic acid during photocatalysis generates new oxygen vacancies along the nanowire surface. We demonstrate that controlling surface-ligand redox chemistry during photocatalysis can enhance the active site concentration on nanocrystal catalysts.

Supercapacitance in graphene oxide materials modified with tetrapyrrole dyes: a mechanistic study

The global increase in mobile technology usage has created a need for better energy storage systems. With standard batteries reaching their technological limits, alternate energy storage methods are gaining momentum. In this study, we demonstrate a cheap and efficient way of building from scratch high-performance supercapacitors based on graphene oxide (GO) functionalized with tetrapyrrole derivatives: porphyrins and phthalocyanines. We present supercapacitors with capacitances about 30 times larger than those of the pristine graphene oxide-based counterparts. Experimental characterisation methods including X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), ultraviolet-visible spectroscopy (UV-VIS), electron paramagnetic resonance (EPR), and density functional theory (DFT) calculations revealed correlations between the structural, magnetic, electronic and thermodynamic properties of these materials and their performance as supercapacitors. Electrochemical studies indicate the complex and versatile nature of capacitive effects associated with thin layers of supramolecular composites of graphene oxide. The electrical double layer (EDL) capacitance, cation intercalation and faradaic processes are coupled. Moreover, differences in the electronic interactions between GO and tetrapyrrolic modifiers have a profound effect on the observed capacitance. At the same time, these interactions are sufficiently weak to induce only subtle spectral changes, as well as a small increase of the interlayer distance as determined by XRD measurements. The present work offers a viable strategy for manufacturing high-performance supercapacitive materials that are superior to the state of the art nanocarbon-based supercapacitors using benign electrolytes in terms of capacitance per mass unit and have the potential for application in future green energy storage technologies. Our study provides insight into the multifarious origins of supercapacitance beyond the well-known EDL mechanism.

Study of Intermolecular Interaction between Small Molecules and Carbon Nanobelt: Electrostatic, Exchange, Dispersive and Inductive Forces

The conjugated structure of carbon is used in chemical sensing and small molecule catalysis because of its high charge transfer ability, and the interaction between carbon materials and small molecules is the main factor determining the performance of sensing and catalytic reactions. In this work, Reduced Density Gradient (RDG) and Symmetry-Adapted Perturbation Theory (SAPT) energy decomposition methods were used in combination to investigate the heterogeneity of catalytic substrates commonly used in energy chemistry with [6, 6] the carbon nanobelt ([6, 6] CNB, the interaction properties and mechanisms inside and outside the system). The results show that most of the attractive forces between dimers are provided by dispersive interactions, but electrostatic interactions cannot be ignored either. The total energy of the internal adsorption of [6, 6] CNB was significantly smaller than that of external adsorption, which led to the small molecules being more inclined to adsorb in the inner region of [6, 6] CNB. The dispersive interactions of small molecules adsorbed on [6, 6] CNB were also found to be very high. Furthermore, the dispersive interactions of the same small molecules adsorbed inside [6, 6] CNB were significantly stronger than those adsorbed outside. In [6, 6] CNB dimers, dispersion played a major role in the mutual attraction of molecules, accounting for 70% of the total attraction.

Comparative Studies of Blue-Emitting Zinc Selenide Nanocrystals Doped with Ag, Cu, and Mg towards Medical Applications

Blue-emitting Ag(+)-, Cu(2+)-, and Mg(2+)-doped ZnSe nanoparticles (NPs) were successfully synthesized at 80 °C by the precipitation method by using mercaptopropionic acid (MPA) as a stabilizer. UV–visible and photoluminescence (PL) studies were applied to investigate their physicochemical properties. Their structural properties were confirmed by X-ray diffraction (XRD), Fourier transform infrared (FT-IR) and transmission electron microscopy (TEM). The size of the ZnSe: X-capped MPA showed a strong relationship with dopant metals. The diameters of the Mg-doped ZnSe and the Cu-doped ZnSe were 22–24 nm, while the Ag-doped ZnSe was halved, at about 13 nm. The photoluminescence was within a wavelength range of 400–550 nm. In addition, the PL intensities, as well as the photoluminescence quantum yields, were in the order of the decreasing ionic radii of the dopant metals (ZnSe:Ag < ZnSe:Mg < ZnSe:Cu). Furthermore, through the interaction with lysine, the PL intensity of the ZnSe:X was changed. Interestingly, the capacity of the ZnSe:Mg for lysine was significantly higher than that of other dopant metals. Moreover, the toxicity of the ZnSe:Mg was relatively insignificant toward the hMSCs (about 80% cell viability at 320 ppm), compared to the transition-metal dopant. Therefore, the ZnSe:Mg material could have great potential for bioapplications.

Occurrence, toxic effects, and mitigation of pesticides as emerging environmental pollutants using robust nanomaterials - A review

Increasing demand of food and agriculture is leading us towards the increasing use and introduction of pesticides to the environment. The upright increase of pesticides in water and associated adverse effects have become a great point of concern to develop proficient methods for their mitigation from water. Various different methods have been traditionally employed for this purpose. Recently, nanotechnology has turned out to be the field of prodigious interest for this purpose, and various specific methods were developed and employed to remove pesticides from water. In this study, nanotechnological methods such as adsorption and degradation have been thoroughly discussed along with their applications and limitations where different types of nanoparticles, nanocomposites, nanotubes, and nanomembranes have played a vital role. However, in this study the most commonly adopted method of adsorption is considered to be the better technique due to its low cost, efficiency, and ease of operation. The adsorption kinetic models were described to explain the efficiency of the nano-adrsorbants in order to evaluate the mass transfer processes. However, various degradation methodologies including photocatalysis and catalytic reduction have also been elaborated. Numerous robust metal, metal oxide and functionalized magnetic nanomaterials have been emphasized, categorized, and compared for the removal of pesticides from water. Additionally, current challenges faced by researchers and future directions have also been provided.

Ultrasmall MnSe Nanoparticles as T1-MRI Contrast Agents for In Vivo Tumor Imaging

Magnetic resonance imaging (MRI) has excellent potential in the clinical monitoring of tumors because it can provide high-resolution soft tissue imaging. However, commercial contrast agents (CAs) used in MRI still have some problems such as potential toxicity to the human body, low relaxivity, and a short MRI acquisition window. In this study, ultrasmall MnSe nanoparticles are synthesized by living Staphylococcus aureus cells. The as-prepared MnSe nanoparticles are monodispersed with a uniform particle size (3.50 ± 0.52 nm). Due to the ultrasmall particle size and good water solubility, the MnSe nanoparticles exhibit in vitro high longitudinal relaxivity properties (14.12 ± 1.85 mM-1·s-1). The CCK-8 colorimetric assay, histological analysis, and body weight results show that the MnSe nanoparticles do not have appreciable toxicity on cells and organisms. Besides, the MnSe nanoparticles as T1-MRI CAs offer a long MRI acquisition window to tumor imaging (∼7 h). This work provides a promising T1-MRI CA for clinical tumor imaging and a good reference for the application of functional MnSe nanoparticles in the biomedicine field.

A New Graphitic Nitride and Reduced Graphene Oxide-Based Sulfur Cathode for High-Capacity Lithium-Sulfur Cells

Lithium-sulfur (Li-S) batteries can provide at least three times higher energy density than lithium-ion (Li-Ion) batteries. However, Li-S batteries suffer from a phenomenon called the polysulfide shuttle (PSS) that prevents the commercialization of these batteries. The PSS has several undesirable effects, such as depletion of active materials from the cathode, deleterious reactions between the lithium anode and electrolyte soluble lithium polysulfides, resulting in unfavorable coulombic efficiency, and poor cycle life of the battery. In this study, a new sulfur cathode composed of graphitic nitride as the polysulfide absorbing material and reduced graphene oxide as the conductive carbon host has been synthesized to rectify the problems associated with the PSS effect. This composite cathode design effectively retains lithium polysulfide intermediates within the cathode structure. The S@RGO/GN cathode displayed excellent capacity retention compared to similar RGO-based sulfur cathodes published by other groups by delivering an initial specific capacity of 1415 mA h g−1 at 0.2 C. In addition, the long-term cycling stability was outstanding (capacity decay at the rate of only 0.2% per cycle after 150 cycles).

Green Synthesis of Mn + Cu Bimetallic Nanoparticles Using Vinca rosea Extract and Their Antioxidant, Antibacterial, and Catalytic Activities

This article outlines the preparation of manganese-doped copper nanoparticles (Mn + Cu NPs) using Vinca rosea (L.) leaf extract as a convenient and environmentally friendly substance. UV–vis, FT–IR, XRD, SEM–EDAX, and DLS instrumental techniques were employed to describe the physical and chemical properties of synthesized V. rosea extract-mediated Vr-Mn + Cu NPs. The synthesized Vr-Mn + Cu NPs were observed to be monodispersed and spherical, with an average size of 412 nm. The plant extract includes a variety of phytochemical components. The Vr-Mn + Cu NPs also have potential antioxidant and antibacterial properties against selected pathogens. The green synthesized Vr-Mn + Cu NPs showed a maximum inhibition zone of 16.33 ± 0.57 mm against E. coli. For dye degradation, MR, EBT, and MO showed the highest degradation percentage capabilities with Vr-Mn + Cu NP-based adsorbents, which were determined to be 78.54 ± 0.16, 87.67 ± 0.06, and 69.79 ± 0.36. The results clearly show that biosynthesized Vr-Mn + Cu NPs may be employed as an antioxidant, antibacterial, photocatalytic dye degradation, and catalytic agent, as well as being ecologically benign.

Pursuing unprecedent anisotropic morphologies of halide-free Pd nanoparticles by tuning nucleation and growth

In this paper, a highly effective and scalable polyol-based modified procedure is reported, yielding shape controlled Pd nanoparticles (NPs) formed via two distinct growth mechanisms as a function of the...

Synthesis, characterization and anticancer activities of silver nanoparticles from the leaves of Datura stramonium L

In recent years, a wide range of studies has pointed out the role of nanoparticles as reservoirs of therapeutics for several diseases, including cancer. Nowadays, cancer research is focused on the development of novel treatment approaches to fight this dreadful disorder. Based on the evidential research and applications of nanoparticles, it is expected that green synthesized nanoparticles may show a prominent role, especially in the biomedical field. The present work is centered on the preparation and characterization of silver nanoparticles (Ag-NPs) from the aqueous (AQ) extract and non-alkaloidal (NA) fraction of Datura stramonium leaves and to evaluate their anticancer potential against mammalian cell lines. The biogenic Ag-NPs are characterized by UV-vis spectra, FTIR DLS, UV-Vis, SEM, and TEM. SEM and TEM analysis reveals the spherical morphology of NPs. The Ag-NPs exhibit cytotoxicity against various mammalian cell lines (A549, HCT-116, PANC-1, SHSY5Y, and U87), which indicate that the AQ and NA based NPs are highly potent to cause cancer cell death. To the best of our knowledge, the present report, for the first time, describes the green synthesis of Ag-NPs from the NA fraction of the D. stramonium and provides pieces of evidence for its anticancer potential.

Features, applications, and sustainability of lipid nanoparticles in cosmeceuticals

Cosmeceuticals are a branch of cosmetic products that forms a bridge between cosmetic and drug products. It is a fast-growing branch of the cosmetic industry, especially after the introduction of novel formulation and manufacturing techniques such as lipid nanoparticles (LNPs). These LNPs-based cosmeceutical products offer several advantages such as enhanced bioavailability of cosmeceutical active ingredients (CAIs), improved aesthetic appeal, and stability of the final products. However, the use of these LNPs may raise some concerns about possible side effects of these LNPs and potential hazards to the customer’s health. Accordingly, an update that focuses on the use of this important branch of nanoparticles is necessary since most review papers are dealing with all types of nanocarriers in the same review with little focus on LNPs. Therefore, in the current review, a detailed analysis of the advantages and disadvantages of LNPs in this field was highlighted, to emphasize the LNPs-based cosmeceuticals on the market, as well as the potential risk posed by LNPs on exposure and recently introduced regulatory guidelines to address them. In addition, if these products can be a candidate as products that meet the sustainable development goals raised by the UN are discussed.

A critical analysis of environmental sustainability metrics applied to green synthesis of nanomaterials and the assessment of environmental risks associated with the nanotechnology

Nanotechnology is one of the most relevant scientific areas today due to its multiple applications in fields such as medicine, environmental remediation, information technology and energy conversion. This importance has led to the need to advance in the development of environmentally sustainable and safe nanomaterials by incorporating the principles of green chemistry during their synthesis and in their applications. However, this qualitative framework of thought does not offer minimum criteria for the use of the term "green", and therefore, this adjective is commonly used to refer to bio-based or nanotechnological processes without taking into account their net ecological impact. In this context, environmental sustainability metrics can be applied to nanotechnology to compare, optimize and quantify the environmental sustainability of synthesis procedures. This review provides an overview of green chemistry and its application in nanotechnology, but also an analysis of the use of green chemistry principles in the development of bio-based nanobiotechnology and nanosynthesis, with special emphasis on the use of sustainability's metrics for the quantitative analysis of nanomaterial synthesis protocols. These include: Atom Economy, E-factor, Process Mass Intensity, Energy Intensity, and Life Cycle Analysis.

Current advances in bio-fabricated quantum dots emphasising the study of mechanisms to diversify their catalytic and biomedical applications

Quantum dots (QDs), owing to their single atom-like electronic structure due to quantum confinement, are often referred to as artificial atoms. This unique physical property results in the diverse functions exhibited by QDs. A wide array of applications have been achieved by the surface functionalization of QDs, resulting in exceptional optical, antimicrobial, catalytic, cytotoxic and enzyme inhibition properties. Ordinarily, traditionally prepared QDs are subjected to post synthesis functionalization via a variety of methods, such as ligand exchange or covalent and non-covalent conjugation. Nevertheless, solvent toxicity, combined with the high temperature and pressure conditions during the preparation of QDs and the low product yield due to multiple steps in the functionalization, limit their overall use. This has driven scientists to investigate the development of greener, environmental friendly and cost-effective methods that can circumvent the complexity and strenuousness associated with traditional processes of bio-functionalization. In this review, a detailed analysis of the methods to bio-prepare pre-functionalized QDs, with elucidated mechanisms, and their application in the areas of catalysis and biomedical applications has been conducted. The environmental and health and safety aspects of the bio-derived QDs have been briefly discussed to unveil the future of nano-commercialization.

Microwave Radiation Influence on Dairy Waste Anaerobic Digestion in a Multi-Section Hybrid Anaerobic Reactor (M-SHAR)

Whey is a primary by-product of dairy plants, and one that is often difficult to manage. As whey processing units are costly and complicated, only 15–20% of whey is recycled for use in the food industry. The difficulties in managing waste whey are particularly pronounced for small, local dairy plants. One possible solution to this problem is to use advanced and efficient digesters. The aim of this study was to present an innovative multi-section hybrid anaerobic bioreactor (M-SHAR) design and to identify how microwave radiation heating (MRH) affects methane fermentation of liquid dairy waste (LDW) primarily composed of acid whey. The MRH reactor was found to perform better in terms of COD removal and biogas production compared with the convection-heated reactor. The heating method had a significant differentiating effect at higher organic load rates (OLRs). With OLRs ranging from 15 to 25 kgCOD∙m−3∙d−1, the M-SHAR with MRH ensured a 5% higher COD removal efficiency and 12–20% higher biogas yields.

Application of Nanomaterials as an Advanced Strategy for the Diagnosis, Prevention, and Treatment of Viral Diseases

The coronavirus disease (COVID-19) pandemic poses serious global health concerns with the continued emergence of new variants. The periodic outbreak of novel emerging and re-emerging infectious pathogens has elevated concerns and challenges for the future. To develop mitigation strategies against infectious diseases, nano-based approaches are being increasingly applied in diagnostic systems, prophylactic vaccines, and therapeutics. This review presents the properties of various nanoplatforms and discusses their role in the development of sensors, vectors, delivery agents, intrinsic immunostimulants, and viral inhibitors. Advanced nanomedical applications for infectious diseases have been highlighted. Moreover, physicochemical properties that confer physiological advantages and contribute to the control and inhibition of infectious diseases have been discussed. Safety concerns limit the commercial production and clinical use of these technologies in humans; however, overcoming these limitations may enable the use of nanomaterials to resolve current infection control issues via application of nanomaterials as a platform for the diagnosis, prevention, and treatment of viral diseases.

Microbial cell factories a new dimension in bio-nanotechnology: exploring the robustness of nature

Bio-based nanotechnology has its existence in biological dimensions e.g. microbial cell factories (bacteria, fungi. algae, yeast, cyanobacteria) plants, and biopolymers. They provide multipurpose biological platforms to supply well-designed materials for diverse nano-biotechnological applications. The "green or bio-based synthesis of nanoparticles (NPs)" has witnessed a research outburst in the past decade. The bio-based synthesis of NPs using microbial cell factories is a benign process and requires mild conditions for the synthesis with end products being less/non-toxic. As a result, its application has extended in multitudinous industries including environment, cosmetics, and pharmaceutical. Thus, the present review summarizes all the significant aspects of nanotechnology and the reason to switch towards the bio-based synthesis of NPs using microbial cell factories. It consists of a detailed description of the bio-based methods employed for the synthesis and classification of NPs. Also, a comprehensive study on the application of bio-based NPs in the various industrial and biotechnological domains has been discussed. The limitation and its solution would help identify the applicability of NPs to "identified and unidentified" sectors.

Production of Zinc and Copper as Nanoparticles by Green Synthesis Using Pseudomonas fluorescens

&lt;b&gt;Background and Objective:&lt;/b&gt; Nanoparticles with a little size to an enormous surface (1-100 nm) have expected clinical, mechanical and agricultural applications. This study aimed to produce nano Zinc Oxide (ZnO) and nano Copper Oxide (CuO) particles by green synthesis. &lt;b&gt;Materials and Methods:&lt;/b&gt; Two strains of &lt;i&gt;Pseudomonas fluorescens&lt;/i&gt; i.e., PSI and PSII, both cell culture supernatants and cell pellets from the two strains were examined separately in CuSO&lt;sub&gt;4&lt;/sub&gt; or ZnSO&lt;sub&gt;4&lt;/sub&gt; solutions. The supernatants from both strains produced color changes in both solutions referring to the formation of nano CuO or ZnO particles. The solutions were examined for nano-particle characteristics using UV-spectroscopy, particle size and morphology were tested using a scanning electron microscope and transmission electron microscopy. &lt;b&gt;Results:&lt;/b&gt; UV-Vis absorption spectrum of solutions at a wavelength range 200-800 nm exhibits a distinct absorption peak in the region of 238-331 and at 303-366 nm for CuO or ZnO NPs, respectively. Absorption bands and the characteristic Surface Plasmon Resonance (SPR) spectra confirm the existence of CuO and ZnO NPs. SEM analysis micrographs indicated that CuO NPs were formed as spherical particles, while the exact shape of ZnO NPs could be identified as oval aggregates. &lt;b&gt;Conclusion:&lt;/b&gt; Changes of color occurred in both solutions of two strains referring to the formation of nano CuO or ZnO particles.

Advances in photothermal nanomaterials for biomedical, environmental and energy applications

Materials that exhibit photothermal effect have attracted enormous research interests due to their ability to strongly absorb light and effectively transform it into heat for a wide range of applications in biomedical, environmental and energy related fields. The past decade has witnessed significant advances in the preparation of a variety of photothermal materials, mainly due to the emergence of many nano-enabled new materials, such as plasmonic metals, stoichiometric/non-stoichiometric semiconductors, and the newly emerging MXenes. These photothermal nanomaterials can be hybridized with other constituents to form functional hybrids or composites for achieving enhanced photothermal performance. In this review, we present the fundamental insight of inorganic photothermal materials, including their photothermal conversion mechanisms/properties as well as their potential applications in various fields. Emphasis is placed on strategic approaches for improving their light harvesting and photothermal conversion capabilities through engineering their nanostructured size, shape, composition, bandgap and so on. Lastly, the underlying challenges and perspectives for future development of photothermal nanomaterials are proposed.

Recent trends in microbial nanoparticle synthesis and potential application in environmental technology: a comprehensive review

Microbial technology comprising environment in various aspects of pollution monitoring, treatment of pollutants, and energy generation has been put forth by the researchers worldwide in an eco-friendly manner. During the past few decades, this revolution has pronounced microbial cells in green nanotechnology, extending the scope, efficiency, and investment capita at research institutes, industries, and global markets. In the present review, initially, the source for the microbial synthesis of nanoparticles will be discussed involving bacteria, fungi, actinomycetes, microalgae, and viruses. Further, the mechanism and bio-components of microbial cells such as enzymes, proteins, peptides, amino-acids, exopolysaccharides, and others involved in the bio-reduction of metal ions to corresponding metal nanoparticles will be emphasized. The biosynthesized nanoparticles physicochemical properties and bio-reduction methods' advantages compared with synthetic methods will be detailed. To understand the suitability of biosynthesized nanoparticles in a wide range of applications, an overview of its blend of medicine, agriculture, and electronics will be discussed. This will be geared up with its applications specific to environmental aspects such as bioremediation, wastewater treatment, green-energy production, and pollution monitoring. Towards the end of the review, nano-waste management and limitations, i.e., void gaps that tend to impede the application of biosynthesized nanoparticles and microbial-based nanoparticles' prospects, will be deliberated. Thus, the review would claim to be worthy of unwrapping microorganisms sustainability in the emerging field of green nanotechnology.

Nanotargeting of Resistant Infections with a Special Emphasis on the Biofilm Landscape

Bacterial resistance to antimicrobial compounds is a growing concern in medical and public health circles. Overcoming the adaptable and duplicative resistance mechanisms of bacteria requires chemistry-based approaches. Engineered nanoparticles (NPs) now offer unique advantages toward this effort. However, most in situ infections (in humans) occur as attached biofilms enveloped in a protective surrounding matrix of extracellular polymers, where survival of microbial cells is enhanced. This presents special considerations in the design and deployment of antimicrobials. Here, we review recent efforts to combat resistant bacterial strains using NPs and, then, explore how NP surfaces may be specifically engineered to enhance the potency and delivery of antimicrobial compounds. Special NP-engineering challenges in the design of NPs must be overcome to penetrate the inherent protective barriers of the biofilm and to successfully deliver antimicrobials to bacterial cells. Future challenges are discussed in the development of new antibiotics and their mechanisms of action and targeted delivery via NPs.

Green-synthesized CeO2 nanoparticles for photocatalytic, antimicrobial, antioxidant and cytotoxicity activities

Cerium oxide nanoparticles (CeO2 NPs) are a sought-after material in numerous fields due to their potential applications such as in catalysis, cancer therapy, photocatalytic degradation of pollutants, sensors, polishing agents. Green synthesis usually involves the production of CeO2 assisted by organic extracts obtained from plants, leaves, flowers, bacteria, algae, food, fruits, etc. The phytochemicals present in the organic extracts adhere to the NPs and act as reducing and/or oxidizing agents and capping agents to stabilize the NPs, modify the particle size, morphology and band gap energy of the as-synthesized materials, which would be advantageous for numerous applications. This review focuses on the green extract-mediated synthesis of CeO2 NPs and discusses the effects on CeO2 NPs of various synthesis methods that have been reported. Several photocatalytic, antimicrobial, antioxidant and cytotoxicity applications have been evaluated, compared and discussed. Future prospects are also suggested.

A review of the microwave-assisted synthesis of carbon nanomaterials, metal oxides/hydroxides and their composites for energy storage applications

Currently, nanomaterials are considered to be the backbone of modern civilization. Especially in the energy sector, nanomaterials (mainly, carbon- and metal oxide/hydroxide-based nanomaterials) have contributed significantly. Among the various green approaches for the synthesis of these nanomaterials, the microwave-assisted approach has attracted significant research interest worldwide. In this context, it is noteworthy to mention that because of their enhanced surface area, high conducting nature, and excellent electrical and electrochemical properties, carbon nanomaterials are being extensively utilized as efficient electrode materials for both supercapacitors and secondary batteries. In this review article, we briefly demonstrate the characteristics of microwave-synthesized nanomaterials for next-generation energy storage devices. Starting with the basics of microwave heating, herein, we illustrate the past and present status of microwave chemistry for energy-related applications, and finally present a brief outlook and concluding remarks. We hope that this review article will positively convey new insights for the microwave synthesis of nanomaterials for energy storage applications.

Formation of Pt-Based Alloy Nanoparticles Assisted by Molybdenum Hexacarbonyl

We report on an optimized, scalable solution-phase synthetic procedure for the fabrication of fine-tuned monodisperse nanostructures (Pt(NiCo), PtNi and PtCo). The influence of different solute metal precursors and surfactants on the morphological evolution of homogeneous alloy nanoparticles (NPs) has been investigated. Molybdenum hexacarbonyl (Mo(CO)₆) was used as the reductant. We demonstrate that this solution-based strategy results in uniform-sized NPs, the morphology of which can be manipulated by appropriate selection of surfactants and solute metal precursors. Co-surfactants (oleylamine, OAm, and hexadecylamine, HDA) enabled the development of a variety of high-index faceted NP morphologies with varying degrees of curvatures while pure OAm selectively produced octahedral NP morphologies. This Mo(CO)₆-based synthetic protocol offers new avenues for the fabrication of multi-structured alloy NPs as high-performance electrocatalysts.