Bioacessibility of PAHs in fuel soot assessed by an in vitro digestive model: effect of including an absorptive sink

Bioaccessibility and health risk assessment of hydrophobic organic pollutants in soils from four typical industrial contaminated sites in China

There have been reports of potential health risks for people from hydrophobic organic pollutants, such as polycyclic aromatic hydrocarbons (PAHs), polychlorinated hydrocarbons (PCHs), and organophosphate flame retardants (OPFRs). When a contaminated site is used for residential housing or public utility and recreation areas, the soil-bound organic pollutants might pose a threat to human health. In this study, we investigated the contamination profiles and potential risks to human health of 15 PAHs, 6 PCHs, and 12 OPFRs in soils from four contaminated sites in China. We used an in vitro method to determine the oral bioaccessibility of soil pollutants. Total PAHs were found at concentrations ranging from 26.4 ng/g to 987 ng/g. PCHs (0.27‒14.3 ng/g) and OPFRs (6.30‒310 ng/g) were detected, but at low levels compared to earlier reports. The levels of PAHs, PCHs, and OPFRs released from contaminated soils into simulated gastrointestinal fluids ranged from 1.74% to 91.0%, 2.51% to 39.6%, and 1.37% to 96.9%, respectively. Based on both spiked and unspiked samples, we found that the oral bioaccessibility of pollutants was correlated with their logKow and molecular weight, and the total organic carbon content and pH of soils. PAHs in 13 out of 38 contaminated soil samples posed potential high risks to children. When considering oral bioaccessibility, nine soils still posed potential risks, while the risks in the remaining soils became negligible. The contribution of this paper is that it corrects the health risk of soil-bound organic pollutants by detecting bioaccessibility in actual soils from different contaminated sites.

Evaluation of the oral bioaccessibility of legacy and emerging brominated flame retardants in indoor dust

Indoor dust is the main source of human exposure to brominated flame retardants (BFRs). In this study, in vitro colon-extended physiologically-based extraction test (CE-PBET) with Tenax as a sorptive sink was applied to evaluate the oral bioaccessibility of twenty-two polybrominated diphenyl ethers (PBDEs) and seven novel BFRs (NBFRs) via indoor dust ingestion. The mean bioaccessibilities of two NBFRs pentabromotoluene (PBT) and 1,2-Bis(2,4,6-tribromophenoxy) ethane (BTBPE) were first proposed, reaching 36.0% and 26.7%, respectively. In order to maintain homeostasis of the gastrointestinal tract, 0.4 g Tenax was added in CE-PEBT, which increased BFRs bioaccessibility by up to a factor of 1.4-1.9. The highest bioaccessibility of legacy PBDEs was tri-BDEs (73.3%), while 2-ethylhexyl-tetrabromo-benzoate (EHTBB), one of penta-BDE alternatives, showed the highest (62.2%) among NBFRs. The influence of food nutrients, liquid to solid (L/S) ratio, and octanol-water partition coefficient (Kow) on bioaccessibility was assessed. The oral bioaccessibility of BFRs increased with existence of protein or carbohydrate while lipid did the opposite. The bioaccessibilities of PBDEs and NBFRs were relatively higher with 200:1 L/S ratio. PBDEs bioaccessibility generally decreased with increasing LogKow. No significant correlation was observed between NBFRs bioaccessibility and LogKow. This study comprehensively evaluated the bioaccessibilities of legacy and emerging BFRs via dust ingestion using Tenax-assisted CE-PBET, and highlighted the significance to fully consider potential influencing factors on BFRs bioaccessibility in further human exposure estimation.

Comparison of in vitro strategies for predicting Dichlorodiphenyltrichloroethane (DDT) and its metabolites bioavailability from soils

In vitro strategies have widely been used to assess bioaccessibility of organic pollutants in soils. However, studies for comparing in vitro models with in vivo data are still limited. In this study, Dichlorodiphenyltrichloroethane (DDT) and its metabolites (called as DDTr) bioaccessibility in nine contaminated soils were measured using physiologically based extraction test (PBET), in vitro digestion model (IVD), and Deutsches Institut für Normung (DIN) with/without Tenax as an absorptive sink, and DDTr bioavailability was assessed using an in vivo mouse model. Whether or not Tenax was added, DDTr bioaccessibility significantly varied among three methods, suggesting that DDTr bioaccessibility depended on the in vitro method employed. Multiple linear regression analysis indicated that sink, intestinal incubation time and bile content are identified to be the dominant factors in controlling DDTr bioaccessibility. Comparison of in vitro and in vivo results demonstrated that DIN assay with Tenax (TI-DIN) provided the best prediction for DDTr bioavailability (r² = 0.66, slope=0.78). After extending intestinal incubation time to 6 h or increasing bile content to 4.5 g/L (same to DIN assay) of the TI-PBET and TI-IVD assays, the in vivo-in vitro correlation will improved significantly, with r² = 0.76 and slope= 1.4 for TI-PBET and r² = 0.84 and slope= 1.9 for TI-IVD under 6 h intestinal incubation, and r² = 0.59 and slope= 0.96 for TI-PBET and r² = 0.51 and slope= 1.0 for TI-IVD under 4.5 g/L of bile content. The results suggest that it is essential to understand these key factors influencing bioaccessibility for the development of standardized in vitro methods, which helps to refine the risk assessment of human exposure to contaminants via soil ingestion.

Magnetic-Transition-Metal Oxides Modified Pollen-Derived Porous Carbon for Enhanced Absorption Performance

In our work, the transition-metal-oxide precursor (TMO@BC, M = Fe, Co, Ni) has been loaded on the pollen carbon by the hydrothermal method and annealed at different temperatures to generate a composite material of metal oxide and pollen carbon in this study, which can effectively prevent agglomeration caused by a small size and magnetism. The XRD patterns of the samples showed that the as-synthesized metal oxides were γ-Fe₂O₃, CoO, and NiO. In the 20 mg/L methyl orange adsorption experiment, the adsorption amount of CoO@C at 500 ℃ reached 19.32 mg/g and the removal rate was 96.61%. Therefore, CoO@C was selected for the adsorption correlation-model-fitting analysis, which was in line with the secondary reaction. The pseudo-second-order kinetic model (R²: 0.9683-0.9964), the intraparticle diffusion model, and the Freundlich adsorption isotherm model indicated that the adsorption process was the result of both physical and chemical adsorptions, and the judgment was based on the electrostatic action. The adsorption and removal efficiency of ciprofloxacin (CIP) by changing the pH of the reaction was about 80%, so the electrostatic attraction worked, but not the main factor. Recovered by an external magnetic field, the three-time recycling efficiency was still maintained at more than 80%. This novel biomass-derived magnetic porous carbon material embedded with transition-metal-oxide nanoparticles is highly promising for many applications, especially in the field of environmental remediation.

Bioaccessibility of Organic Compounds Associated with Tire Particles Using a Fish In Vitro Digestive Model: Solubilization Kinetics and Effects of Food Coingestion

Tire and road wear particles (TRWP) account for an important part of the polymer particles released into the environment. There are scientific knowledge gaps as to the potential bioaccessibility of chemicals associated with TRWP to aquatic organisms. This study investigated the solubilization and bioaccessibility of seven of the most widely used tire-associated organic chemicals and four of their degradation products from cryogenically milled tire tread (CMTT) into fish digestive fluids using an in vitro digestion model based on Oncorhynchus mykiss. Our results showed that 0.06-44.1% of the selected compounds were rapidly solubilized into simulated gastric and intestinal fluids within a typical gut transit time for fish (3 h in gastric and 24 h in intestinal fluids). The environmentally realistic scenario of coingestion of CMTT and fish prey was explored using ground Gammarus pulex. Coingestion caused compound-specific changes in solubilization, either increasing or decreasing the compounds' bioaccessibility in simulated gut fluids compared to CMTT alone. Our results emphasize that tire-associated compounds become accessible in a digestive milieu and should be studied further with respect to their bioaccumulation and toxicological effects upon passage of intestinal epithelial cells.

Accumulation and biotransformation of the novel vanillin-derived pesticide, vanisulfane, in laying hens after dietary exposure

Vanisulfane is a novel plant antiviral agent with promising prospects to prevent and control viral crop diseases. However, human health risk assessment after vanisulfane exposure from animal-derived food products remains limited. To gain insight into the accumulation and biotransformation of vanisulfane in livestock, laying hens were dietary exposed to ¹⁴C-vanisulfane. Although more than 80 % of the applied dose was observed in the excreta, vanisulfane and its metabolites accumulated in tissues, especially the liver and kidney, and was found to be transferred to eggs. A total of eight metabolites associated with both phase I and phase II metabolism were identified via ¹⁴C tracing and LC-QTOF-MS. Phase I metabolism included oxidation, hydroxylation, dechlorination and demethylation, and phase II metabolism was associated with sulfonic acid and glucuronide conjugation. The high percentages of metabolites in laying hens' tissues and organs, illustrated the active biotransformation of vanisulfane in vivo, which suggests that the marker residues of vanisulfane should consider its major metabolites. A digestive model was also used to determine the digestive fate of vanisulfane. This study improves our understanding of vanisulfane accumulation and biotransformation in laying hens, which will be helpful for risk assessments of foods derived from animals exposed to pesticides.

Evaluating the inhalation bioaccessibility of traffic-impacted particulate matter-bound PAHs in a road tunnel by simulated lung fluids

Polycyclic aromatic hydrocarbons (PAHs) are the most highly concerned pollutants bound on traffic-impacted particulate matter (TIPM). The inhaled TIPM-bound PAHs risk has attracted much attention, whereas the inhalation bioaccessibility, a method to refine the exposure risk assessment, has not yet been extensively introduced in the exposure risk assessment. Thus, in vitro assays using artificial lung fluids including artificial lysosomal fluid (ALF), Gamble's solution (GS), and modified GS (MGS) were conducted to assess the inhalation bioaccessibility of USEPA 16 PAHs in TIPM collected from an expressway tunnel, the influence factors of PAHs' inhalation bioaccessibility were explored, and the exposure risk of TIPM-bound PAHs was estimated based on inhalation bioaccessibility. Results showed that the average PAHs concentrations were 30.5 ± 12.9 ng/m³, 36.2 ± 5.19 ng/m³, and 39.9 ± 4.31 ng/m³ in the tunnel inlet PM_2.5, TSP, and tunnel center PM_2.5, respectively. Phe, Flt, Pyr, Nap, Chr, BbF, and BkF were found as the dominant species in TSP and PM_2.5, indicating a dominant contribution of PAHs from diesel-fueled vehicular emissions. The bioaccessible fractions measured for different PAH species in tunnel PM_2.5 and TSP were highly variable, which can be attributed to PAHs' physicochemical properties, size, and carbonaceous materials of TIPM. The addition of Tenax into SLF as an "adsorption sink" can greatly increase PAHs' inhalation bioaccessibility, but DPPC has a limited effect on tunnel PM-bound PAHs' bioaccessibility. The incremental lifetime carcinogenic risk (ILCR) of tunnel inlet PM_2.5-bound PAHs evaluated according to their total mass concentration exceeded the threshold (1.0 × 10^-6) set by the USEPA, whereas the ILCRs estimated based on the inhalation bioaccessibility were far below the threshold. Hence, it is vitally important to take into consideration of pollutant's bioaccessibility to refine health risk assessment.

Assessment of DDT and its Metabolites Bioaccessibility in Historically Contaminated Soils Using Unfed and Fed in Vitro Methods

Bioaccessibility of hydrophobic organic contaminants (HOCs) from unintentional ingestion of soil is increasingly assessed with in vitro gastrointestinal models incorporating a sorption sink. In this study, the bioaccessibility of DDTs in contaminated soils (n = 11) was determined using "unfed" unified bioaccessibility method (UBM) and fed organic estimation human simulation test (FOREhST) with/without Tenax as an absorbent. By adding Tenax, the bioaccessibility of DDTs determined using UBM was significantly increased from 4.9-30.6% to 31.6-86.0%. In contrast, the bioaccessibility of DDTs determined using FOREhST without/with Tenax were similar with values of 20.0-60.9% vs 31.5-47.6%, implying that the influence of food components on the absorption efficiency of the sink should not be overlooked. Much high fraction of DDTs (bioaccessibility: 11.7-24.8%) remained in FOREhST supernatant after Tenax collection, suggesting that prediction of bioavailability through bioaccessibility obtained by absorbent needs to be treated with caution when bioaccessibility is determined using a "fed state" in vitro method.

Bioaccessibility-based monitoring and risk assessment of indoor dust-bound PAHs collected from housing and public buildings: Effect of influencing factors

Polycyclic aromatic hydrocarbons (PAHs) bounded in indoor dust have significant effects in residents' health. Although various researches has evaluated exposure to PAHs in some indoor areas around the world, no work has been conducted on bioaccessibility of indoor PAHs in the buildings of Bushehr city. Therefore, dust samples were collected from various indoor microenvironments including residential buildings (RB), office buildings (OB), commercial buildings (CB), industrial buildings (IB), school classroom (SC), laboratory (LR), drugstores (DS), beauty salons (BS), smoking cafés (SC) and restaurants (Res) - 10 from each microenvironment. In order to determine the levels of polycyclic aromatic hydrocarbons (PAHs), bioaccessible PAHs, and sink sorption PAHS were analyzed in them. The results showed that the highest level of these contaminants was detected in SC and the lowest in Lab. The median concentration of dust-bound ΣPAHs, bioaccessible ΣPAHs, and sink sorption ΣPAHs in the SC samples were 10,890.00, 1157.92, and 297.28 ng/g, and they were 1160.00, 19.69, and 0.75 ng/g in Lab samples. The results also indicated that the ΣPAHs concentration had a negative and significant association with the ventilation rate (pvalue <0.05 in most cases), as well as a positive and significant relationship with smoking inside buildings (pvalue <0.05). The estimated daily intake (EDI) values calculated for residential buildings (RB) were higher compared to most of the other studied microenvironments. These observations can be due to the fact that people spend much more time in residential buildings (50% of the entire day) compared to occupational settings (22%). Thus, they intake more dust within a longer time, and are hence exposed to larger amounts of pollutants bound with these particles.

Adsorption and catalytic degradation of preservative parabens by graphene-family nanomaterials

Parabens pose increasing threats to human health due to endocrine disruption activity. Adsorption and degradation of parabens by three types of graphene-family nanomaterials (GFNs) were therefore investigated. For a given paraben, the maximum adsorption capacities (Q⁰) followed the order of reduced graphene oxide (RGO) > multilayered graphene (MG) > graphene oxide (GO); for a given GFN, Q⁰ followed the order of butylparaben (BuP) > propylparaben (PrP) > ethylparaben (EtP) > methylparaben (MeP), dominated by hydrophobic interaction. MeP removal by all the three GFNs was highly enhanced (0.55-4.37 times) with the assistance of H₂O₂ due to additional catalytic degradation process, and MG showed the highest removal enhancement. ∙OH was confirmed as the dominant radicals responsible for parabens degradation. For MG and RGO, the metal impurities (Fe, Cu, Mn, and Co) initiated Fenton-like reaction with H₂O₂ to generate ∙OH. GO contained oxygen-centered free radicals, which were responsible for ∙OH formation via transferring electron to H₂O₂. Four degradation byproducts of MeP were identified, including oxalic, propanedioic, fumaric, and 2,5-dihydroxybenzoic acids. Combined with density function theory calculations, the degradation sites and pathways were identified and confirmed. These findings provide useful information on mechanistic understanding towards the adsorption and degradation of parabens by GFNs.

Evaluating the adsorption performance of Tenax TA® in different containers: An isolation tool to study the bioaccessibility of nitro-PAHs in spiked soil

The improved in vitro gastrointestinal simulation methods, with the addition of the adsorption sink, are considered as a promising tool for predicting the bioaccessibility of contaminants. However, the problem associated with the recovery of the adsorption sink from the complex matrix needs more understand. Although previous studies tried to solve this shortcoming by using the containers (a vessel to hold the adsorption sink), there is no systematic comparison study on the impact of containers on bioaccessibility till now, especially for nitro-polycyclic aromatic hydrocarbons (nitro-PAHs). In order to understand the problem, commonly used containers in previous studies (dialysis bags and stainless-steel screen) were selected and deployed in the Fed Organic Estimation Human Simulation Test (FOREhST) method to compare the effects of these containers on the bioaccessibility of nitro-PAHs desorbed from the five different types of soils into the gastrointestinal fluid (GIF). Results showed that in order to maintain a constant sorptive gradient for the high molecular weight (MW) nitro-PAHs, 0.25 g of Tenax TA® were required in FOREhST. Compared with Tenax TA® encapsulated in dialysis bag (Tenax-EDBG), the use of Tenax TA® encapsulated in dissolution basket (Tenax-EDBT) significantly increased the bioaccessibility of nitro-PAHs in the soil from 5.6-31.4% to 17.2-70.6%, due to the better diffusion performance. The bioaccessibility of nitro-PAHs by FOREhST extraction with Tenax-EDBT showed a significant negative correlation with soil total organic carbon (TOC), whereas a weak correlation with pH. This study provides the researchers with a more standardized in vitro method to quantify the bioaccessibility of PAHs and their derivatives in soil.

Coupling polydimethylsiloxane vials with a physiologically based extraction test to predict bioavailability of hydrophobic organic contaminants in soils

As alternatives to in vivo assays, physiologically based in vitro methods have been developed to measure bioaccessibility of hydrophobic organic contaminants (HOCs) in soils. However, bioaccessibility can usually be underestimated since in vitro tests fail to provide sufficient affinity for HOCs. Sorption sink was therefore included to simulate intestinal cell absorption and to promote the mobilization of HOCs from soils. In this study, polydimethylsiloxane (PDMS) vials, widely used as passive dosing, were introduced as a sorption sink to improve the performance of physiologically based extraction test (PBET). The bioaccessibility of PCBs (representatives of HOCs) in 13 lab-spiked soils measured by PBET coupled with PDMS vials ranged from 56.5 ± 2.7% to 109.3 ± 1.5%. Correlation was conducted between the bioaccessibility and relative bioavailability (RBA) of PCBs assessed using an in vivo mouse model. A significant correlation (p < 0.001, R² = 0.72, slope = 0.85 ± 0.16) was observed between in vitro and in vivo data, indicating that the proposed method here can be a robust in vitro method to predict PCB RBA in soils. The accuracy of this novel method was further shown by extracting one field contaminated soil with environmental relevant levels of PCBs. The relative standard deviation of bioaccessibility measured by PBET with PDMS vials was 1.2-9.8%, and much lower than those by PBET alone with values of 17.1-63.6%. In addition, the PDMS vials can be reusable as sorption sink, and no significant variation (p = 0.44) in PCB bioaccessibility was observed among 5 cycles of extracting soils with PBET coupled with PDMS vials. Due to the high sorption capacity of PDMS and flexibility of PDMS mass used for vials, the novel method here is expected to be applicable in soils with a wide range of contamination levels.

Water-induced release of recalcitrant polycyclic aromatic hydrocarbons from soil organic matter during microwave-assisted solvent extraction

Polycyclic aromatic hydrocarbons (PAHs) in soil can be recalcitrant to solvent extraction after aging. We showed in this study that mixing a small amount of water in the extracting solvent during microwave-assisted extraction (MAE) can release recalcitrant PAHs, resulting in significant improvement in the analyzed concentrations. The improvement factor (F) for the total of 16 priority PAHs (∑PAH16) listed by the United States Environmental Protection Agency was 1.44-1.55 for field soils. By comparing the F values for different soil organic components, we demonstrated that the recalcitrant PAHs were primarily associated with biochar, humic acid (HA), and humin (HM), with the F values for ∑PAH16 of 1.94, 6.62, and 4.59, respectively. The results showed that the recalcitrant PAHs comprised a sequestered fraction and a desorption-limited fraction. NMR spectra showed that water worked alone at elevated temperature to promote hydrolysis of biochar and destroy the macromolecular structure, thus causing the release of the otherwise sequestered PAHs during MAE. The substantial reduction in F values for HA and HM after demineralization indicated sequestration of PAHs in organic-mineral complexes, which can be destroyed by hot water treatment. The release of the sequestered fraction was nonselective and independent of compound hydrophobicity. In comparison, the release of the desorption-limited fraction was positively affected by the hydrophobicity of PAHs and was facilitated by the presence of water in the extracting solvent. The results of this study provide important insights into the sequestration and release of recalcitrant PAHs in soil.

A review on in-vitro oral bioaccessibility of organic pollutants and its application in human exposure assessment

Generally, human oral exposure assessments of contaminants have not considered the absorption factor in the human gastrointestinal tract, thus overestimating human exposure and associated health risk. Currently, more researchers are adding the absorption factor into human exposure assessment, and bioaccessibility measured by in-vitro methods is generally replacing bioavailability for estimation because of the cheap and rapid determination. However, no single unified in-vitro method is used for bioaccessibility measurement of organic pollutants, although several methods have been developed for these pollutants and have shown good in vitro-in vivo correlation between bioaccessibility and bioavailability. The present review has focused on the development of in-vitro methods, validation of these methods through in-vivo assays, determination of factors influencing bioaccessibility, application of bioaccessibility in human exposure assessment, and the challenges faced. Overall, most in-vitro methods were validated using bioavailability, and better in vitro-in vivo correlations were obtained when absorption sinks were added to the digestion solution to mimic dynamic absorption of organic chemicals by small intestine. Incorporating bioaccessibility into the estimation of human exposure by oral ingestion significantly decreases the estimated exposure dose. However, more investigations on bioaccessibility of hydrophobic organic compounds are urgently needed because many challenges for in-vitro methods remain to be overcome.

Evaluating oral and inhalation bioaccessibility of indoor dust-borne short- and median-chain chlorinated paraffins using in vitro Tenax-assisted physiologically based method

Though ingestion and inhalation of dust have been suggested as important exposure routes contributing chlorinated paraffins (CPs) build-up in humans, the bioaccessibility of dust-borne CPs in the organ environment has not been well-studied, which may hinder an accurate estimation of exposure risks. In this study, the ingestion and inhalation bioaccessibility of dust-borne short- and median-chain CPs (SCCPs and MCCPs) was assessed using (colon-extended) physiologically based extraction test with the addition of Tenax. The ingestion bioaccessibility of SCCPs 51.5 %Cl, SCCPs 63 %Cl, MCCPs 42 %Cl, and MCCPs 57 %Cl was in ranges of 21.1-44.0 %, 11.7-45.8 %, 21.9-36.6 %, and 7.9-32.9 %, respectively. Multiple linear regression analysis demonstrated statistically significant associations of ingestion bioaccessibility with carbon chain length and chlorine substitution. The ingestion bioaccessibility of CPs also increased with co-existence of carbohydrate/protein. The inhalation bioaccessibility of SCCPs (16.7-38.7 % in artificial lysosomal fluid and 15.5-34.1 % in modified Gamble solution) was significantly higher than MCCPs (<5 %), and varied with dust particle size/total organic carbon content. Our study indicates that modest bioaccessible fractions of CPs in dust should be taken into account to refine the estimation of human exposure, and their bioaccessibility may be affected by CP molecular size, nutritional content and dust property.

Key Physicochemical Properties Dictating Gastrointestinal Bioaccessibility of Microplastics-Associated Organic Xenobiotics: Insights from a Deep Learning Approach

A potential risk from human uptake of microplastics is the release of plastics-associated xenobiotics, but the key physicochemical properties of microplastics controlling this process are elusive. Here, we show that the gastrointestinal bioaccessibility, assessed using an in vitro digestive model, of two model xenobiotics (pyrene, at 391-624 mg/kg, and 4-nonylphenol, at 3054-8117 mg/kg) bound to 18 microplastics (including pristine polystyrene, polyvinyl chloride, polyethylene terephthalate, polypropylene, thermoplastic polyurethane, and polyethylene, and two artificially aged samples of each polymer) covered wide ranges: 16.1-77.4% and 26.4-83.8%, respectively. Sorption/desorption experiments conducted in simulated gastric fluid indicated that structural rigidity of polymers was an important factor controlling bioaccessibility of the nonpolar, nonionic pyrene, likely by inducing physical entrapment of pyrene in porous domains, whereas polarity of microplastics controlled bioaccessibility of 4-nonylphenol, by regulating polar interactions. The changes of bioaccessibility induced by microplastics aging corroborated the important roles of polymeric structures and surface polarity in dictating sorption affinity and degree of desorption hysteresis, and consequently, gastrointestinal bioaccessibility. Variance-based global sensitivity analysis using a deep learning neural network approach further revealed that micropore volume was the most important microplastics property controlling bioaccessibility of pyrene, whereas the O/C ratio played a key role in dictating the bioaccessibility of 4-nonylphenol in the gastric tract.

Membrane Enhanced Bioaccessibility Extraction (MEBE) of hydrophobic soil pollutants - Using a semipermeable membrane for separating desorption medium and acceptor solvent

Bioaccessibility extractions are increasingly applied to measure the fraction of pollutants in soil, sediment and biochar, which can be released under environmentally or physiologically relevant conditions. However, the bioaccessibility of hydrophobic organic chemicals (HOCs) can be markedly underestimated when the sink capacity of the extraction medium is insufficient. Here, a novel method called "Membrane Enhanced Bioaccessibility Extraction" (MEBE) applies a semipermeable membrane to physically separate an aqueous desorption medium that sets the desorption conditions from an organic medium that serves as acceptor phase and infinite sink. The specific MEBE method combines HOC (1) desorption into a 2-hydroxypropyl-β-cyclodextrin solution, (2) transfer through a low-density polyethylene (LDPE) membrane and (3) release into ethanol, serving as analytical acceptor phase. The surface to volume ratio within the LDPE membrane is maximized for rapid depletion of desorbed molecules, and the capacity ratio between the acceptor phase and the environmental sample is maximized to achieve infinite sink conditions. Several experiments were conducted for developing, optimizing and pre-testing the method, which was then applied to four soils polluted with polycyclic aromatic hydrocarbons. MEBE minimized sample preparation and yielded a solvent extract readily analyzable by HPLC. This study focused on the proof-of-principle testing of the MEBE concept, which now can be extended and applied to other samples and desorption media.

Desorption Resistance of Polycyclic Aromatic Hydrocarbons in Biochars Incubated in Cow Ruminal Liquid in Vitro and in Vivo

Biochar is a new, promising, and sustainable feed additive alternative in agricultural production, which may, however, contain a considerable amount of polycyclic aromatic hydrocarbons (PAHs). As a measure of their bioaccessibility to ruminants, we quantified PAH concentrations in biochars before and after three different incubation experiments. Specifically, the biochars were subjected to (1) an aqueous cyclodextrin suspension with a contaminant trap as (infinite) sink, (2) an in vitro experiment with cow ruminal liquid and a contaminant trap, and (3) an in vivo experiment within cow rumen. Three different biochars were used that contained 13-407 mg/kg_dw of the sum of 16 U.S. EPA PAHs before the exposure. While experiment (1) resulted in no or minimal bioaccessibility (desorption resistance) of the PAHs expressed by their largely unaltered concentrations, experiments (2) and (3) caused concentration reductions on average by 35 and 56%, respectively, presumably mainly due to the presence of the ruminal fluid in (2) and (3), and the extended sorption capacity in (3). Thus, simple and "abiotic" passive sampling methods may not capture all processes contributing to bioaccessibility in complex biological systems. A comparison with average daily PAH intake of ruminants suggests that quality-controlled biochar containing <10 mg/kg_dw PAHs will not pose an increased risk when applied as a feed additive.

In vitro gastrointestinal mobilization and oral bioaccessibility of PAHs in contrasting soils and associated cancer risks: Focus on PAH nonextractable residues

The gastrointestinal mobilization and oral bioaccessibility of polycyclic aromatic hydrocarbon (PAH) nonextractable residues (NERs) from soils remain unexplored, including associated incremental lifetime cancer risks. This study investigated the gastrointestinal mobilization of PAHs and their NERs from contrasting soils, using a physiologically based extraction test that incorporates a silicone-rod (Si-Org-PBET) as PAH sink. Associated cancer risks following soil ingestion were also evaluated. Four solvent-spiked and aged soils, and four long-term contaminated manufactured gas plant (MGP) soils, were utilized. Total-extractable PAH concentrations were measured after exhaustive solvent extractions of soils. We evaluated the PAH sorption efficiency of the silicone rods and associated sorption kinetics, using PAH-spiked silica sand as the contaminated matrix. We then assessed gastrointestinal mobilization of benzo[a]pyrene and benzo[a]pyrene NERs from the solvent-spiked soils, and mobilization of six PAHs and their NERs from the MGP soils. PAH oral bioaccessibility was determined. The incremental lifetime cancer risks (ILCRs), using Si-Org-PBET- and total-extractable PAH concentrations from the MGP soils, were calculated. Sorption kinetics modelling showed that 95% of mobilized PAHs sorbed to the silicone rods within 2-19 h, depending on PAH physico-chemical properties. Total-extractable and Si-Org-PBET extractable PAH concentrations exceeded health investigation levels (3 mg/kg based on benzo[a]pyrene toxic equivalent quotients) in soils. PAH oral bioaccessibility approached 100% for solvent-spiked soils, but only 24-36% for the MGP soils. Associated ILCRs exceeded target levels (10^-5) for one MGP soil, particularly for 2-3 year olds, despite oral bioaccessibility considerations. In contrast, mobilized PAH NERs did not exceed health investigation and ILCR levels, as the NERs were highly sequestered, especially in the MGP soils. PAH nonextractable residues in long-term contaminated soils are unlikely to be mobilized in concentrations that pose cancer risks to humans following soil ingestion, and do not need to be considered in risk assessments.

Ingestion bioaccessibility of indoor dust-bound PAHs: Inclusion of a sorption sink to simulate passive transfer across the small intestine

In this study, we investigated the levels of 12 priority polycyclic aromatic hydrocarbons (PAH₁₂) pollutants, bioaccessible PAH₁₂, and sorption sink for PAH₁₂ by a silicone sheet of indoor dust samples, which were collected from teachers' offices (n = 17), students' offices (n = 17), laboratory (n = 11), and experimental center (n = 9), using an in vitro digestive model. In PAH₁₂, bioaccessible PAH₁₂, and sorption sink PAH₁₂, benzo[b]fluoranthene (BbF), phenanthrenes (Phe), and fluoranthene (FLA) were labeled respectively the most significant PAHs (6.61 ± 4.42 μg/g, 0.16 ± 0.11 μg/g, and 0.08 ± 0.06 μg/g) after indoor dust ingestion, whereas the proportions of anthracene (Ant), benzo(g,h,i)perylene (BghiP), and BghiP (0.34 ± 0.17, 0.03 ± 0.03 and 0.01 ± 0.01 μg/g) were low. Based on benzo[a]pyrene- equivalent carcinogenic concentrations, the mean daily exposure of bioaccessible PAH₁₂ and sorption sink for PAH₁₂ by indoor dust ingestion was 4.07 × 10^-3 ± 1.73 × 10^-3 and 3.23 × 10^-3 ± 1.36 × 10^-3 μg/day in the experimental center; 4.01 × 10^-3 ± 2.05 × 10^-3 and 1.46 × 10^-3 ± 6.72 × 10^-4 μg/day in students' offices; 8.25 × 10^-4 ± 2.33 × 10^-4 and 5.15 × 10^-4 ± 1.37 × 10^-4 μg/day in laboratory; and 7.05 × 10^-4 ± 4.12 × 10^-5 and 2.82 × 10^-4 ± 4.36 × 10^-5 μg/day in teachers' offices, respectively. Our results indicated that the passive transfer fraction of PAH₁₂ (44.07%-67.36% in this case) is therefore large and needs to be considered in exposure and risk assessments.

Bioaccessibility of polycyclic aromatic hydrocarbons in central air conditioner filter dust and its occupational exposure to shopping mall employees

The assessment of the human health risk of dust exposure to polycyclic aromatic hydrocarbons (PAHs) has been hampered by a lack of data on the bioaccessibility. The purpose of this study was to apply in vitro methods using simulated lungs with artificial lysosomal fluid (ALF) and Gamble's solution and digestive fluid to assess the bioaccessibility of 8 high molecular weight PAH (PAH₈) in central air conditioner (AC) filter dust from a shopping mall in northeast China. Overall, the bioaccessible PAH₈ concentration (μg/g) in AC filter dust samples after ALF and Gamble's solution extraction for 24 h were notable, with a mean of 1.71 ± 0.6 and 1.92 ± 0.5 in the sales areas, and a mean of 1.61 ± 0.2 and 1.85 ± 0.2 in the office areas. AC filter dust exposed to simulated digestive fluid had a mean bioaccessible PAH₈ concentration (μg/g) of 1.60 ± 0.4 in the sales areas and 1.15 ± 0.2 in the office areas. Benzo[b]fluoranthene (BbF) made the most significant contribution to the total and bioaccessible PAH₈ concentrations in all of the AC filter dust after simulated digestive fluid extraction, while the bioaccessibility was driven by chrysene (Chr, sales areas) and indeno[1,2,3-c,d]pyrene (Ind, office areas). Both the bioaccessibility and concentration of PAH8 in simulated lung fluid were mainly driven by benzo[a]pyrene (BaP). This study highlights the need to conduct bioaccessibility experiments for an adequate exposure assessment of health risk.

Comparison of sorption kinetics of PAHs by sorptive sinks and caco-2 cell and the correlation between bioaccessibility and bioavailability of PAHs in indoor dust

Sorptive sinks are extensively used in the bioaccessibility of organic contaminants, but their suitability for simulating the intestinal cell is seldom reported. In the present study, the sorption efficiency of PAHs by sorptive sinks including silica, poly(ethylene-co-vinyl acetate) (polyE), tenax, and C18 were compared with that by caco-2 cells. The elimination rate constants of phenanthrene, fluoranthene, pyrene, benzo(a)pyrene by caco-2 cell were 0.0417 ± 0.006 min^-1, 0.0411 ± 0.0074 min^-1, 0.0362 ± 0.006 min^-1, and 0.0526 ± 0.0037 min^-1, respectively, which were more closely to that of silica and polyE compared to other materials. This indicated that these materials might be the preferable sorptive sinks to simulate absorption of PAHs by intestinal cells. The bioaccessibility of phenanthrene, fluoranthene, pyrene, benzo(a)pyrene in indoor dust ranged from 15.5-43.5%, 9.10-38.8%, 10.0-37.9%, and 6.00-21.9%, respectively, based on physiologically based extraction test (PBET) and the sorptive sinks added in the intestinal solution led to 1.17 to 8.47-fold enhancement of bioaccessibility. The correlation of in vivo PAHs relative bioavailability (RBA) and in vitro digestion bioaccessibility with or without the sorptive sinks of indoor dust were measured, and the results indicated that silica and polyE were more likely to predict PAHs RBA of indoor dust, which was consistent with the results of sorption kinetics assay. The present results indicate that silica and polyE have the potential to simulate caco-2 cell and the inclusion of these materials in the PBET is likely to predict PAHs RBA in indoor dust. Capsule: Silica and polyE were more likely to simulate absorption of PAHs by intestinal cells, and to predict PAHs RBA of indoor dust.

Bioaccessibility and exposure assessment of trace metals from urban airborne particulate matter (PM10 and PM2.5) in simulated digestive fluid

We describe a batch-extraction with simulated digestive fluid (salivary fluid, gastric fluid and intestinal fluid) to estimate the bioaccessibility of inhaled trace metals (TMs) in particulate matter less than 10 and 2.5 μm in aerodynamic diameter (PM₁₀ and PM_2.5). Concentrations of the assayed TMs (As, Cd, Cr, Ni, Mn, Cu, Zn, Sb, Hg and Pb) were determined in PM₁₀ and PM_2.5 samples by inductively coupled plasma-mass spectrometry. The TMs with the largest soluble fractions for airborne PM collected from winter and summer in saliva were Mn and Sb, respectively; in seasons this became Co in gastric fluid and Cu in intestinal fluid. Clearly, bioaccessibility is strongly dependent on particle size, the component of simulated digestive fluids (e.g., pH, digestive enzymes pepsin and trypsin), and the chemical properties of metal ions. The particle size and seasonal variation affected the inhaled bioaccessible fraction of PM-bound TMs during mucociliary clearance, which transported PM from the tracheal and the bronchial region to the digestive system. This study provides direct evidence for TMs in airborne PM being bioaccessible TMs are likely to possess an enhanced digestive toxic potential due to airborne PM pollution.

In vitro assessment of pyrethroid bioaccessibility via particle ingestion

Due to their intensive use in agricultural and residential pest control, human exposure to residues of multiple pyrethroids frequently occurs. Pyrethroids have exceptionally high affinity for solid particles, highlighting the need to understand human exposure through oral ingestion of contaminated soil or dust particles. In this study, we used artificial gastrointestinal fluids to measure the desorption or bioaccessibility of eight current-use pyrethroids in soil and dust samples. Tenax was further included as a sink in parallel treatments to simulate the effect of removal due to transfer of pyrethroids to lipid membranes. The use of 0.4 g of Tenax in 20 mL digestive fluids resulted in rapid and efficient trapping of pyrethroids, and further, greatly increased bioaccessibility. In the artificial digestive fluids without Tenax, 6.0-48.0% of pyrethroids were desorbed over 21 h, and the fractions increased by 1.6-4.1 folds to 21.5-79.3% with the Tenax sink. Therefore, 6.0-79.3% of soil or dust-borne pyrethroids may be considered bioavailable upon ingestion. While protein and sucrose increased the estimated bioaccessibility, co-presence of lipid (vegetable oil) decreased the bioaccessibility of pyrethroids, likely due to competitive phase partition. Pyrethroids were also found to be unstable in the artificial intestinal fluid containing pancreatin, further decreasing the potential bioaccessibility of pyrethroids on soil or dust particles. The limited bioaccessibility should be considered to refine the prediction of human exposure and risk through oral ingestion of pyrethroid residues.

Applying no-depletion equilibrium sampling and full-depletion bioaccessibility extraction to 35 historically polycyclic aromatic hydrocarbon contaminated soils

Assessing the bioaccessibility of organic pollutants in contaminated soils is considered a complement to measurements of total concentrations in risk assessment and legislation. Consequently, methods for its quantification require validation with historically contaminated soils. In this study, 35 such soils were obtained from various locations in Switzerland and Cuba. They were exposed to different pollution sources (e.g., pyrogenic and petrogenic) at various distance (i.e., urban to rural) and were subject to different land use (e.g., urban gardening and forest). Passive equilibrium sampling with polyoxymethylene was used to determine freely dissolved concentrations (C_free) of polycyclic aromatic hydrocarbons (PAHs), while sorptive bioaccessibility extraction (SBE) with silicone rods was used to determine the bioaccessible PAH concentrations (C_bioacc) of these soils. The organic carbon partition coefficients of the soils were highest for skeet soils, followed by traffic, urban garden and rural soils. Lowest values were obtained from soil exposed to petrogenic sources. Applicability of SBE to quantify C_bioacc was restricted by silicone rod sorption capacity, as expressed quantitatively by the Sorption Capacity Ratio (SCR); particularly for soils with very high K_D. The source of contamination determined bioaccessible fractions (f_bioacc). The smallest f_bioacc were obtained with skeet soils (15%), followed by the pyrogenically influenced soils, rural soils, and finally, the petrogenically contaminated soil (71%). In conclusion, we present the potential and limitations of the SBE method to quantify bioaccessibility in real soils. These results can be used for additional development of this and similar bioaccessibility methods to guarantee sufficient sorption capacity to obtain reliable results.

Bioaccessibility of PBDEs present in indoor dust: A novel dialysis membrane method with a Tenax TA® absorption sink

Human uptake of flame retardants (FRs) such as polybrominated diphenyl ethers (PBDEs) via indoor dust ingestion is commonly considered as 100% bioaccessible, leading to potential risk overestimation. Here, we present a novel in vitro colon-extended physiologically-based extraction test (CE-PBET) with Tenax TA® as an absorptive "sink" capable to enhance PBDE gut bioaccessibility. A cellulose-based dialysis membrane (MW cut-off 3.5kDa) with high pH and temperature tolerance was used to encapsulate Tenax TA®, facilitating efficient physical separation between the absorbent and the dust, while minimizing re-absorption of the ingested PBDEs to the dust particles. As a proof of concept, PBDE-spiked indoor dust samples (n=3) were tested under four different conditions; without any Tenax TA® addition (control) and with three different Tenax TA® loadings (i.e. 0.25, 0.5 or 0.75g). Our results show that in order to maintain a constant sorptive gradient for the low MW PBDEs, 0.5g of Tenax TA® are required in CE-PBET. Tenax TA® inclusion (0.5g) resulted in 40% gut bioaccessibility for BDE153 and BDE183, whereas greater bioaccessibility values were seen for less hydrophobic PBDEs such as BDE28 and BDE47 (~60%). When tested using SRM 2585 (n=3), our new Tenax TA® method did not present any statistically significant effect (p>0.05) between non-spiked and PBDE-spiked SRM 2585 treatments. Our study describes an efficient method where due to the sophisticated design, Tenax TA® recovery and subsequent bioaccessibility determination can be simply and reliably achieved.

Bioaccessibility of PAHs and PAH derivatives in a fuel soot assessed by an in vitro digestive model with absorptive sink: Effects of aging the soot in a soil-water mixture

Aging soot in soil under neutral aqueous condition for 30days significantly (p<0.05) reduced the apparent gastrointestinal bioaccessibility (B_app) of polycyclic aromatic hydrocarbons (PAHs) and PAH derivatives (d-PAHs) natively present in a composite fuel soot sample. B_app was determined under fasting conditions by a previously developed in vitro digestive model that includes silicone sheet as a third phase absorptive sink in the small intestinal stage. Redistribution of contaminants from soot to soil, determined in independent experiments, was too small to affect B_app. Prior uptake by soot of a commercial humic acid representing dissolved soil organic matter had no impact on B_app. We identified two causes for the reduction in B_app by soil and found they were approximately additive. One is an aging time-independent "matrix effect" attributable to competitive sorption by the soil of labile contaminant that is desorbed from the soot during the digestion test. The other is the dissolution of soluble substances from the soot during the aging process that increases soot surface area and nanoporosity. The increased surface area and nanoporosity drive contaminants from labile to nonlabile states in the soot and decrease the desorption into the digestive fluid, the former contributing most to the reduction in B_app. The present study shows that mixing of raw soot with soil has important effects, both aging and non-aging, on the bioaccessibility of soot-borne contaminants.

Apoplastic and symplastic uptake of phenanthrene in wheat roots

The contamination of agricultural crops by polycyclic aromatic hydrocarbons (PAHs) has drawn considerable attention due to their carcinogenicity, mutagenicity, and toxicity. However, the uptake process of PAHs in plant roots has not been clearly understood. In this work, we first study the radial uptake of phenanthrene in hydroculture wheat roots by vacuum-infiltration-centrifugation method. The concentration-dependent kinetics of apoplastic and symplastic uptake at phenanthrene concentrations of 0-6.72 μM for 4 h can be described with the Langmuir and Michaelis-Menten equations, respectively; whereas, their time-dependent kinetics at 5.60 μM phenanthrene for 36 h follow the Elovich equation. The apoplastic and symplastic uptake increases with temperature of 15-35 °C. The apparent Arrhenius activation energies for apoplastic and symplastic uptake are 77.5 and 9.39 KJ mol^-1, respectively. The symplastic uptake accounts for over 55% of total phenanthrene uptake, suggesting that symplast is the dominant pathway for wheat root phenanthrene uptake. Larger volume of symplast in roots and lower activation energy lead to the greater contribution of symplast to total uptake of phenanthrene. Our results provide not only novel insights into the mechanisms on the uptake of PAHs by plant roots, but also the help to optimize strategies for crop safety and phytoremediation of PAH-contaminated soil/water.

Bioaccessibility of PAHs in contaminated soils: Comparison of five in vitro methods with Tenax as a sorption sink

For hydrophobic organic contaminants, physiologically based in vitro methods may need to include a sorption sink to simulate in vivo intestinal uptake. We compared PAH bioaccessibility in contaminated soils using five in vitro methods including physiologically based extraction test (PBET), in vitro digestion assay (IVD), method from Deutsches Institut für Normung (DIN), unified bioaccessibility method (UBM), and fed organic estimation human simulation test (FOREhST) in the absence and presence of Tenax as a sorption sink. The PAH bioaccessibility without Tenax were pretty low with values ranging from below detection limit to 13.4%, indicating the limited capacity of these in vitro models to accommodate PAHs. With addition of Tenax, bioaccessibility increased to 0.59-75.5% for all PAH congeners. Even with the dominant effect of sorption sink, bioaccessibility values significantly varied among all the five methods with DIN result being the highest at 7.0-34.8%. Based on multiple linear regression, Tenax, incubation time, and bile contents are identified to be the most important factors in controlling bioaccessibility. The understanding of these key factors for bioaccessibility is highly necessary to standardize in vitro methods, which helps to refine the assessment of health risk through exposure to ingested contaminants.

Relative bioavailability and bioaccessibility of PCBs in soils based on a mouse model and Tenax-improved physiologically-based extraction test

In this study, bioavailability of polychlorinated biphenyls (PCBs) in soil samples aged for various time intervals (7 days, 1 and 5 months) was assessed by in vivo tests using mice. The in vivo bioavailability of PCBs in soil ranged from 45% (PCB180 in soil aging for 5 month) to 119% (PCB52 in soil aging for 1 month), indicating that not all PCBs was available for absorption after ingestion of soil samples. The bioaccessibility was assessed using both physiologically-based extraction test (PBET) and Tenax improved PBET (TI-PBET). Acceptable in vivo-in vitro correlation (r² = 0.70 and slope = 1.30 ± 0.20) was observed for TI-PBET, not for PBET. Due to dominant role played by Tenax and bile, the TI-PBET was further simplified to Tenax and Tenax-bile extraction methods. However, poor in vivo-in vitro correlation (r² = 0.14 and 0.05) was observed for the two simplified methods, which may be attributed to the combined effect between sorption sink and components in PBET. Therefore, in order to simply TI-PBET or standardize in vitro methods, it is highly necessary to explore the mechanism about the interaction between in vitro method components and sorption sink, or to screen key factors for bioaccessibility results in the future studies.

Absorption, Distribution, Metabolism, and in Vitro Digestion of Beta-Cypermethrin in Laying Hens

Beta-cypermethrin (beta-CP), an important pyrethroid insecticide, and its main acid metabolites are frequently detected in human samples. Because beta-CP may pose some risk to human health, we studied dynamics and residues of beta-CP and its metabolites in hen egg, droppings, blood, and 15 other tissues after continuous exposure. A digestive model was then used to study beta-CP's digestive fate. Beta-CP and its metabolites significantly accumulated in tissues with high lipid contents and were readily transferred to eggs. Beta-CP was mainly metabolized into acid metabolites that accumulated in egg and edible tissues of laying hens, suggesting that humans may be exposed to beta-CP acid metabolites through food.

Bioavailability and bioaccessibility of polycyclic aromatic hydrocarbons from (post-pyrolytically treated) biochars

Bioaccessibility data of PAHs from biochar produced under real world conditions is scarce and the influence of feedstock and various post-pyrolysis treatments common in agriculture, such as co-composting or lacto-fermentation to produce silage fodder, on their bioavailability and bioaccessibility has hardly been studied. The total (C_total), and freely dissolved (i.e., bioavailable) concentrations (C_free) of the sum of 16 US EPA PAHs of 43 biochar samples produced and treated in such ways ranged from 0.4 to almost 2000 mg/kg, and from 12 to 81 ng/L, respectively, which resulted in very high biochar-water partition coefficients (4.2 ≤ log K_D ≤ 8.8 L/kg) for individual PAHs. Thirty three samples were incubated in contaminant traps that combined a diffusive carrier and a sorptive sink. Incubations yielded samples only containing desorption-resistant PAHs (C_res). The desorption resistant PAH fraction was dominant, since only eight out of 33 biochar samples showed statistically significant bioaccessible fractions (f_{bioaccessible} = 1 - C_res/C_total). Bioavailability correlated positively with C_total/surface area. Other relationships of bioavailability and -accessibility with the investigated post-pyrolysis processes or elemental composition could not be found. PAH exposure was very limited (low C_free, high C_res) for all samples with low to moderate C_total, whereas higher exposure was determined in some biochars with C_total > 10 mg/kg.

Significance of Cooking Oil to Bioaccessibility of Dichlorodiphenyltrichloroethanes (DDTs) and Polybrominated Diphenyl Ethers (PBDEs) in Raw and Cooked Fish: Implications for Human Health Risk

The present study examined the bioacessibility of DDTs and PBDEs in cooked fish (yellow grouper; Epinephelus awoara) with and without heating using the colon extended physiologically based extraction test. The bioaccessibility of DDTs and PBDEs increased from 60 and 26% in raw fish to 83 and 63%, respectively, after the addition of oil to raw fish. However, they decreased from 83 to 66% and from 63 to 40%, respectively, when oil-added fish were cooked. Human health risk assessment based on bioaccessible concentrations of DDTs and PBDEs in fish showed that the maximum allowable daily fish consumption rates decreased from 25, 59, and 86 g day^-1 to 22, 53, and 77 g day^-1 for children, youths, and adults, respectively, after fish were cooked with oil. These findings indicated that the significance of cooking oil to the bioaccessibility of DDTs and PBDEs in food should be considered in assessments of human health risk.

Bioaccessibility of nitro- and oxy-PAHs in fuel soot assessed by an in vitro digestive model with absorptive sink

Ingestion of soot present in soil or other environmental particles is expected to be an important route of exposure to nitro and oxygenated derivatives of polycyclic aromatic hydrocarbons (PAHs). We measured the apparent bioaccessibility (B_app) of native concentrations of 1-nitropyrene (1N-PYR), 9-fluorenone (9FLO), anthracene-9,10-dione (ATQ), benzo[a]anthracene-7,12-dione (BaAQ), and benzanthrone (BZO) in a composite fuel soot sample using a previously-developed in vitro human gastrointestinal model that includes silicone sheet as a third-phase absorptive sink. Along with B_app, we determined the 24-h sheet-digestive fluid partition coefficient (K_s,24h), the soot residue-fluid distribution ratio of the labile sorbed fraction after digestion (K_r,lab), and the maximum possible (limiting) bioaccessibility, B_lim. The B_app of PAH derivatives was positively affected by the presence of the sheet due to mass-action removal of the sorbed compounds. In all cases B_app increased with imposition of fed conditions. The enhancement of B_app under fed conditions is due to increasingly favorable mass transfer of target compounds from soot to fluid (increasing bile acid concentration, or adding food lipids) or transfer from fluid to sheet (by raising small intestinal pH). Food lipids may also enhance B_app by mobilizing contaminants from nonlabile to labile states of the soot. Compared to the parent PAH, the derivatives had larger K_r,lab, despite having lower partition coefficients to various hydrophobic reference phases including silicone sheet. The B_lim of the derivatives under the default conditions of the model ranged from 65.5% to 34.4%, in the order, 1N-PYR > ATQ > 9FLO > BZO > BaAQ, with no significant correlation with hydrophobic parameters, nor consistent relationship with B_lim of the parent PAH. Consistent with earlier experiments on a wider range of PAHs, the results suggest that a major determinant of bioaccessibility is the distribution of chemical between nonlabile and labile states in the original solid.

Oral relative bioavailability of Dichlorodiphenyltrichloroethane (DDT) in contaminated soil and its prediction using in vitro strategies for exposure refinement

In this study, the bioavailability of DDTr (sum of DDT, DDD and DDE isomers) in pesticide-contaminated soil was assessed using an in vivo mouse model. DDTr relative bioavailability (RBA) ranged from 18.7±0.9 (As35) to 60.8±7.8% (As36) indicating that a significant portion of soil-bound DDTr was not available for absorption following ingestion. When DDTr bioaccessibility was assessed using the organic Physiologically Based Extraction Test (org-PBET), the inclusion of a sorption sink (silicone cord) enhanced DDTr desorption by up to 20-fold (1.6-3.8% versus 18.9-56.3%) compared to DDTr partitioning into gastrointestinal fluid alone. Enhanced desorption occurred as a result of the silicone cord acting as a reservoir for solubilized DDTr to partition into, thereby creating a flux for further desorption until equilibrium was achieved. When the relationship between in vivo and in vitro data was assessed, a strong correlation was observed between the mouse bioassay and the org-PBET+silicone cord (slope=0.94, y-intercept=3.5, r(2)=0.72) suggesting that the in vitro approach may provide a robust surrogate measure for the prediction of DDTr RBA in contaminated soil.

PAH Accessibility in Particulate Matter from Road-Impacted Environments

Snowmelt, surface runoff, or stormwater releases in urban environments can result in significant discharges of particulate matter-bound polycyclic aromatic hydrocarbons (PAHs) into aquatic environments. Recently, more-specific activities such as road-tunnel washing have been identified as contributing to contaminant load to surface waters. However, knowledge of PAH accessibility in particulate matter (PM) of urban origin that may ultimately be released into urban surface waters is limited. In the present study, we evaluated the accessibility of PAHs associated with seven distinct (suspended) particulate matter samples collected from different urban sources. Laboratory-based infinite sink extractions with silicone rubber (SR) as the extractor phase demonstrated a similar pattern of PAH accessibility for most PM samples. Substantially higher accessible fractions were observed for the less-hydrophobic PAHs (between 40 and 80% of total concentrations) compared with those measured for the most-hydrophobic PAHs (<5% of total concentrations). When we focused on PAHs bound to PM from tunnel-wash waters, first-order desorption rates for PAHs with log Kow > 5.5 were found in line with those commonly found for slowly or very slowly desorbing sediment-associated contaminants. PAHs with log Kow < 5.5 were found at higher desorbing rates. The addition of detergents did not influence the extractability of lighter PAHs but increased desorption rates for the heavier PAHs, potentially contributing to increases in the toxicity of tunnel-wash waters when surfactants are used. The implications of total and accessible PAH concentrations measured in our urban PM samples are discussed in a context of management of PAH and PM emission to the surrounding aquatic environment. Although we only fully assessed PAHs in this work, further study should consider other contaminants such as OPAHs, which were also detected in all PM samples.

Importance of suspended sediment (SPS) composition and grain size in the bioavailability of SPS-associated pyrene to Daphnia magna

Hydrophobic organic compounds (HOCs) tend to associate with suspended sediment (SPS) in aquatic environments; the composition and grain size of SPS will affect the bioavailability of SPS-associated HOCs. However, the bioavailability of HOCs sorbed on SPS with different compositions and grain sizes is not well understood. In this work, passive dosing devices were made to control the freely dissolved concentration of pyrene, a typical HOC, in the exposure systems. The effect of pyrene associated with amorphous organic carbon (AOC), black carbon (BC), and minerals of SPS with grain sizes of 0-50 μm and 50-100 μm on the immobilization and enzymatic activities of Daphnia magna was investigated to quantify the bioavailability of pyrene sorbed on SPS with different grain sizes and compositions. The results showed that the contribution of AOC-, BC-, and mineral-associated pyrene to the total bioavailability of SPS-associated pyrene was approximately 50%-60%, 10%-29%, and 20%-30%, respectively. The bioavailable fraction of pyrene sorbed on the three components of SPS was ordered as AOC (22.4%-67.3%) > minerals (20.1%-46.0%) > BC (9.11%-16.8%), and the bioavailable fraction sorbed on SPS of 50-100 μm grain size was higher than those of 0-50 μm grain size. This is because the SPS grain size will affect the ingestion of SPS and the SPS composition will affect the desorption of SPS-associated pyrene in Daphnia magna. According to the results obtained in this study, a model has been developed to calculate the bioavailability of HOCs to aquatic organisms in natural waters considering both SPS grain size and composition.

Oral Bioavailability, Bioaccessibility, and Dermal Absorption of PAHs from Soil-State of the Science

This article reviews the state of the science regarding oral bioavailability, bioaccessibility, and dermal absorption of carcinogenic polycyclic aromatic hydrocarbons (cPAHs) in soil by humans, and discusses how chemical interactions may control the extent of absorption. Derived from natural and anthropomorphic origins, PAHs occur in a limited number of solid and fluid matrices (i.e., PAH sources) with defined physical characteristics and PAH compositions. Existing studies provide a strong basis for establishing that oral bioavailability of cPAHs from soil is less than from diet, and an assumption of 100% relative bioavailability likely overestimates exposure to cPAHs upon ingestion of PAH-contaminated soil. For both the oral bioavailability and dermal absorption studies, the aggregate data do not provide a broad understanding of how different PAH source materials, PAH concentrations, or soil chemistries influence the absorption of cPAHs from soil. This article summarizes the existing studies, identifies data gaps, and provides recommendations for the direction of future research to support new default or site-specific bioavailability adjustments for use in human health risk assessment.

How to Determine the Environmental Exposure of PAHs Originating from Biochar

Biochars are obtained by pyrolyzing biomass materials and are increasingly used within the agricultural sector. Owing to the production process, biochars can contain polycyclic aromatic hydrocarbons (PAHs) in the high mg/kg range, which makes the determination of the environmental exposure of PAHs originating from biochars relevant. However, PAH sorption to biochar is characterized by very high (10(4)-10(6) L/kg) or extreme distribution coefficients (KD) (>10(6) L/kg), which makes the determination of exposure scientifically and technically challenging. Cyclodextrin extractions, sorptive bioaccessibility extractions, Tenax extractions, contaminant traps, and equilibrium sampling were assessed and selected methods used for the determination of bioavailability parameters for PAHs in two model biochars. Results showed that: (1) the KD values of typically 10(6)-10(9) L/kg made the biochars often act as sinks, rather than sources, of PAHs. (2) Equilibrium sampling yielded freely dissolved concentrations (pg-ng/L range) that were below or near environmental background levels. (3) None of the methods were found to be suitable for the direct measurement of the readily desorbing fractions of PAHs (i.e., bioacessibility) in the two biochars. (4) The contaminant-trap method yielded desorption-resistant PAH fractions of typically 90-100%, implying bioaccessibility in the high μg/kg to low mg/kg range.

Predicting the Relative Bioavailability of DDT and Its Metabolites in Historically Contaminated Soils Using a Tenax-Improved Physiologically Based Extraction Test (TI-PBET)

Due to their static nature, physiologically based in vitro assays often fail to provide sufficient sorption capacity for hydrophobic organic contaminants (HOCs). The addition of a sorption sink to in vitro intestinal solution has the potential to mimic dynamic intestinal uptake for HOCs, thereby increasing their desorption from soil. However, the effectiveness of sorption sinks for improving in vitro assays needs to be compared with in vivo data. In this study, Tenax was added as a sorption sink into the physiologically based extraction test (PBET), while DDT and its metabolites (DDTr) were investigated as typical HOCs. Tenax added at 0.01-0.2 g to the PBET intestinal solution sorbed ∼100% of DDTr in 6.3-19 min, indicating its ability as an effective sorption sink. DDTr bioaccessibility in six contaminated soils using Tenax-improved PBET (TI-PBET; 27-56%) was 3.4-22 fold greater than results using the PBET (1.2-15%). In vivo DDTr relative bioavailability (RBA) was measured using a mouse adipose model with values of 17.9-65.4%. The inclusion of Tenax into PBET improved the in vivo-in vitro correlation from r(2) = 0.36 (slope = 2.1 for PBET) to r(2) = 0.62 (slope = 1.2 for TI-PBET), illustrating that the inclusion of Tenax as a sorption sink improved the in vitro prediction of DDTr RBA in contaminated soils.

Using in vitro bioaccessibility to refine estimates of human exposure to PAHs via incidental soil ingestion

PAH bioaccessibility in contaminated soil was determined using the organic physiologically based extraction test with the inclusion of a sorption sink. Silicone cord was incorporated into the assay in order to overcome the limited capacity of the in vitro medium to accommodate desorbable PAHs. Initially, silicone cord sorption efficacy was determined by assessing sorption kinetics using PAH-spiked sand (phenanthrene, pyrene and benzo[a]pyrene; 10-1000mgkg(-1)). Irrespective of PAH and concentration, >95% of the initial PAH mass partitioned into the silicone cord within 12h although rates were lower at higher concentration and with increasing hydrophobicity. When PAH bioaccessibility was assessed in contaminated soil (n=18), contamination source (i.e. pyrogenic versus petrogenic) influenced PAH bioaccessibility. Individual PAH bioaccessibility ranged up to 81.7±2.7% although mean values ranged from 2.1 (acenaphthalene) to 20.8% (benzo[k]fluoranthene) with upper 95% confidence intervals of the means of 4.5 and 28.3% respectively. Although a PAH in vivo-in vitro correlation is yet to be established, bioaccessibility approaches incorporating sorption sinks represent a robust approach for estimating PAH bioavailability as the desorbable fraction may be a conservative measure of the absorbable fraction.

Bioaccessibility of PAHs in Fuel Soot Assessed by an in Vitro Digestive Model with Absorptive Sink: Effect of Food Ingestion

We investigated the effects of changing physiological conditions in the digestive tract expected with food ingestion on the apparent bioaccessibility (Bapp) of 11 polycyclic aromatic hydrocarbons (PAHs) in a fuel soot. A previously established in vitro digestive model was applied that included silicone sheet as a third-phase absorptive sink simulating passive transfer of PAHs to intestinal epithelium in the small intestine stage. The Bapp is defined as the fraction found in the digestive fluid plus sheet after digestion. We determined that Bapp was independent of gastric pH and addition of nonlipid milk representing dietary proteins and carbohydrates, whereas it increased with bile acids concentration (2.0-10 g/L), small intestinal pH (5.00-7.35), and addition of soybean oil representing dietary lipid (100% and 200% of the mean daily ingestion by 2-5 year olds in the U.S.). Bapp of PAHs increases with small intestinal pH due to the combined effects of mass transfer promotion from nonlabile to labile sorbed states in the soot, weaker sorption of the labile state, and increasingly favorable partitioning from the digestive fluid to the silicone sink. Under fed conditions, Bapp increases with inclusion of lipids due to the combined effects of mass transfer promotion from nonlabile to labile states, and increasingly favorable partitioning into bile acid micelles. Our results indicate significant variability in soot PAH bioaccessibility within the range of physiological conditions experienced by humans, and suggest that bioaccessibility will increase with coconsumption of food, especially food with high fat content.