Environmental applications of carbon-based nanomaterials

Generation of disinfection byproducts by graphene quantum dot: Graphene nanostructures and water chemistry

Graphene quantum dot (GQD), as one of the smallest graphene nanomaterials (GNMs), has the potential to be widely used due to its excellent fluorescence properties, hydrophilicity, and good biocompatibility. GQD remaining in water will generate DBPs when entering the disinfection process, and whether the generation mechanism and influencing factors are similar to those of other GNMs has not been proven and thoroughly investigated. In this study, the total amount, effect, and mechanism of DBPs formation from GQD chlorination were investigated and compared with graphene oxide (GO) and graphene. The results show that GQD produced a total trichloromethane (TCM) amount of 1019.6 μg/L, which is significantly higher than that produced by GO (99.2 μg/L) and graphene (7.0 μg/L) at a concentration of 500 mg/L. The key factors are abundant functional groups and strong hydrophilicity of GQD after the characterization and comparison of physicochemical properties. Different water chemistry conditions influence DBPs formation, such as Br- increased the formation of brominated DBPs, and high pH led to a decrease in TCM generated by GQD, which is different from other GNMs. However, NaCl concentration can be negligible. Moreover, residual GQD in natural water can participate in the DBPs formation and increase the content of DBPs, which may be influenced by the diversity of chemical composition in surface water. This study highlights the unique impact of GQD on DBPs formation.

Evaluation of high temperature impacts and nanotechnology as a shield against temperature stress on tomatoes - A review

Rising temperature due to changing climate significantly impacts the production of tomato. The morpho-physiological functions of tomato such as gas exchange, growth and development, flowering, fruit setting, quality, fruit size, weight that can influence the yield and production is drastically affected by higher temperatures. Among the growth stages of tomato, flowering and fruit setting stage is highly vulnerable to high temperature resulting in reduced flower numbers, increased flower abortion, stigma exertion, abnormal ovule, reduced pollen germination, pollen numbers, pollen tube development, pollen viability and increased male sterility. The flower to fruit ratio and duration also highly influenced by higher temperatures. It significantly reduced fruit set, fruit number, weight and quality (Lycopene, carotenoids), changing sugars and acids ratio. Apart from day temperature, the asymmetrically rising night temperature and difference in day and night temperature pattern plays a considerable role in physiological and biochemical processes of tomato. Nanotechnology proves to be a successful tool for sustainable production of tomato than many other alternative mitigation strategies due to its localized action, low quantity requirement, minimal wastage, less residues, eco friendliness, biodegradability, multifunctionality, synergistic capabilities and higher plant productivity. It imitates the antioxidant enzymes playing active role in physiological functions in tomato thereby inducing tolerance mechanisms for managing high temperature stress. Further research should focus on use of several other nanoparticles that have potential but not yet experimented on tomato to mitigate heat stress and producing biodegradable, green synthesized nanoparticles that are cost effective and affordable to farmers.

Water dispersible carbon nanomaterials reduced N, P, and K leaching potential in sandy soils: A column leaching study

Carbon nanomaterials (CNMs) - amendments with carbon in nanoscale form -could potentially enhance fertilizer delivery efficiency in agriculture, but their interaction with soil properties and nutrient co-mobility, especially in coarse-textured soils, remain poorly understood. We conducted a column leaching study in repacked soil columns to compare the co-leaching of novel water-dispersible CNMs and soil nutrients across two levels of CNMs applications (200 & 400 mg kg-1), two fertilization rates (low:80 mg kg-1 of N, P and K and high: 200 mg N kg-1, 100 mg P kg-1, 200 mg K kg-1, applied as ammonium nitrate, potassium phosphate, and potassium nitrate) and two soils (Spodosol with pH = 5.1, Alfisol with pH = 6.5). We imposed 12 leaching events to each column, with each leaching event adding water equivalent to the soil-pore volume (250 mL), resulting in cumulative leaching of 3000 mL of water through each column. CNMs applications reduced cumulative leaching losses of NO3-N (Spodosol: 8-12 %, Alfisol: 9-19 %), NH4-N (Spodosol: 2-14 %, Alfisol: 9-14 %), P (Spodosol: 23-27 %, Alfisol: 23-36 %) and K (Spodosol: 17-23 %, Alfisol: 24-26 %) compared to fertilized columns without CNMs. CNMs increased soil pH by up to 0.3 units (Spodosol) or 0.5 units (Alfisol), while lowering electrical conductivity by 15-20 % at the high fertilization rate in both soils. Columns with water-dispersible CNMs accumulated 25-30 % more total C in the base sections of the Alfisol compared to the Spodosol, indicating faster downward movement through the soil profile. Overall, we demonstrated that CNMs have the potential to reduce nutrient leaching in coarse-textured soils, which could be particularly beneficial in high-input intensive agricultural systems.

Revolutionizing neurotherapeutics: Nanocarriers unveiling the potential of phytochemicals in Alzheimer's disease

Neurological disorders pose a huge worldwide challenge to the healthcare system, necessitating innovative strategies for targeted drug delivery to the central nervous system. Alzheimer's disease (AD) is an untreatable neurodegenerative condition characterized by dementia and alterations in a patient's physiological and mental states. Since ancient times, medicinal plants have been an important source of bioactive phytochemicals with immense therapeutic potential. This review investigates new and safer alternatives for prevention and treatment of disease related to inevitable side effects associated with synthetic compounds. This review examines how nanotechnology can help in enhancing the delivery of neuroprotective phytochemicals in AD. Nevertheless, despite their remarkable neuroprotective properties, these natural products often have poor therapeutic efficacy due to low bioavailability, limited solubility and imperfect blood brain barrier (BBB) penetration. Nanotechnology produces personalized drug delivery systems which are necessary for solving such problems. In overcoming these challenges, nanotechnology might be employed as a way forward whereby customized medication delivery systems would be established as a result. The use of nanocarriers in the design and application of important phytochemicals is highlighted by this review, which indicate potential for revolutionizing neuroprotective drug delivery. We also explore the complications and possibilities of using nanocarriers to supply nutraceuticals and improve patients' standard of living, and preclinical as well as clinical investigations displaying that these techniques are effective in mitigating neurodegenerative diseases. In order to fight brain diseases and improve patient's health, scientists and doctors can employ nanotechnology with its possible therapeutic interventions.

Highly Water-Dispersed Natural Fullerenes Coated with Pluronic Polymers as Novel Nanoantioxidants for Enhanced Antioxidant Activity

Fullerene is a cosmic material with a buckyball-like structure comprising 60 carbon atoms. It has attracted significant interest because of its outstanding antioxidant, antiviral, and antibacterial properties. Natural fullerene (NC60) in shungite meets the demand of biomedical fields to scavenge reactive oxygen species in many diseases. However, its hydrophobicity and poor solubility in water hinder its use as an antioxidant. In this study, highly water-dispersed and stable Pluronic-coated natural fullerene nanoaggregates (NC60/Plu) were prepared from various Pluronic polymers. The water dispersity and stability of NC60 were compared and optimized based on the characteristics of Pluronic polymers including F68, F127, L35, P123, and L81. In particular, NC60 coated with Pluronic F127 at a weight ratio of 1 to 5 showed excellent antioxidant effects both in situ and in vitro. This suggests that the high solubilization of NC60 in Pluronic polymers increases its chance of interacting with reactive oxygen radicals and improves radical scavenging activity. Thus, the optimized NC60/PF127 may be a novel biocompatible antioxidant for treating various diseases associated with oxidative stress.

Recent progresses in bentonite/lignin or polysaccharide composites for sustainable water treatment

Today, with the growth of the human population, industrial activities have also increased. Different industries such as painting, cosmetics, leather, etc. have broadly developed, and as a result, they also produce a lot of pollutants. These pollutants can enter the environment and pollute water, air, and soil. Organic dyes, nitro compounds, drug residues, pesticides and herbicides are pollutants that should be removed from the environment. Natural polymers or biopolymers are important types of organic materials that are broadly applied for different applications. Among them, polysaccharides and lignin, which are two types of biopolymers, have attracted much consideration owing to their advantages such as biocompatibility, environmental friendly, safety, availability, etc. Polysaccharides include cellulose, gum, starch, alginate (Alg), chitin, and chitosan (CS). On the other hand, bentonite is one of the types of clays, which owing to their properties like large specific surface area, adsorption performance, naturally available, etc., have drawn the interest of many researchers. As a result, the synthesis of a composite including polysaccharide/lignin and bentonite can be very efficient for different applications, especially environmental ones. In this review, we instigated the preparation of these composites as well as the removal performance of them. In fact, we reported recent advancements in the synthesis of lignin- and polysaccharide-bentonite composites for the removal of diverse kinds of contaminants like organic dyes, nitro compounds, and hazardous materials.

Decolorization of methylene blue by silver/reduced graphene oxide-ethylene diamine nanomaterial: synthesis, characterization, and optimization

In this study, ethylene diamine-coated reduced graphene oxide-supported silver composite (Ag/rGO-ED) was synthesized and used as an efficient catalyst for the decolorization of methylene blue (MB) in the presence of NaBH4. The morphology of the obtained material was elucidated using field emission scanning electron microscopy (FE-SEM), Fourier-transform infrared spectroscopy (FTIR), energy-dispersive X-ray analysis (EDX), transmission electron microscopy (TEM), and X-ray diffraction (XRD) techniques. The influences of four parameters (MB concentration (mg/L), NaBH4 amount (mM), catalyst amount (g/L), and contact time (s)) on the decolorization process were appraised and optimized via response surface methodology (RSM). For the decolorization of MB, the optimum solutions were obtained as Co of 32.49 mg/L, NaBH4 amount of 152.89 mM, catalyst amount of 0.83 g/L, and 101.39 s contact time with MB decolorization efficiency of 97.73%. MB, a pollutant in wastewater, was decolorized rapidly by Ag/rGO-ED with an efficiency of approximately 97%. The exploration of kinetics and thermodynamics was another major emphasis of the work. The activation energy (Ea) and rate constant (k) for the decolorization of MB were obtained as 37.9 kJ/mol and 0.0135 s-1, respectively. The obtained results show that the catalyst, a new composite material in the literature, is promising for decolorization of wastewater.

Cardiovascular toxic effects of nanoparticles and corresponding molecular mechanisms

Rapid advancements in nanotechnology have been integrated into various disciplines, leading to an increased prevalence of nanoparticle exposure. The widespread utilization of nanomaterials and heightened levels of particulate pollution have prompted government departments to intensify their focus on assessing the safety of nanoparticles (NPs). The cardiovascular system, crucial for maintaining human health, has emerged as vulnerable to damage from nanoparticle exposure. A mounting body of evidence indicates that interactions can occur when NPs come into contact with components of the cardiovascular system, contributing to adverse cardiovascular disease (CVD). However, the underlying molecular mechanisms driving these events remain elusive. This work provides a comprehensive review of recent advance on nanoparticle-induced adverse cardiovascular events and offers insight into the associated molecular mechanisms. Finally, the influencing factors of NPs-induced cardiovascular toxicity are discussed.

Nanoscience and nanotechnology for water remediation: an earnest hope toward sustainability

Water pollution and the global freshwater crisis are the most alarming concerns of the 21st century, as they threaten the sustainability and ecological balance of the environment. The growth of global population, climate change, and expansion of industrial processes are the main causes of these issues. Therefore, effective remediation of polluted water by means of detoxification and purification is of paramount importance. To this end, nanoscience and nanotechnology have emerged as viable options that hold tremendous potential toward the advancement of wastewater treatment methods to enhance treatment efficiency along with augmenting water supply via utilization of unconventional water sources. Materials at the nano level have shown great promise toward water treatment applications owing to their unique physicochemical properties. In this focus article, we highlight the role of new fundamental properties at the nano scale and material properties that are drastically increased due to the nano dimension (e.g. volume-surface ratio) and highlight their impact and potential toward water treatment. We identify and discuss how nano-properties could improve the three main domains of water remediation: the identification of pollutants, their adsorption and catalytic degradation. After discussing all the beneficial aspects we further discuss the key challenges associated with nanomaterials for water treatment. Looking at the current state-of-the-art, the potential as well as the challenges of nanomaterials, we believe that in the future we will see a significant impact of these materials on many water remediation strategies.

Transforming Waste into Wealth: Advanced Carbon-Based Electrodes Derived from Refinery and Coal By-Products for Next-Generation Energy Storage

This comprehensive review addresses the need for sustainable and efficient energy storage technologies against escalating global energy demand and environmental concerns. It explores the innovative utilization of waste materials from oil refineries and coal processing industries as precursors for carbon-based electrodes in next-generation energy storage systems, including batteries and supercapacitors. These waste-derived carbon materials, such as semi-coke, coal gasification fine ash, coal tar pitch, petroleum coke, and petroleum vacuum residue, offer a promising alternative to conventional electrode materials. They present an optimal balance of high carbon content and enhanced electrochemical properties while promoting environmental sustainability through effectively repurposing waste materials from coal and hydrocarbon industries. This review systematically examines recent advancements in fabricating and applying waste-derived carbon-based electrodes. It delves into the methodologies for converting industrial by-products into high-quality carbon electrodes, with a particular emphasis on carbonization and activation processes tailored to enhance the electrochemical performance of the derived materials. Key findings indicate that while higher carbonization temperatures may impede the development of a porous structure, using KOH as an activating agent has proven effective in developing mesoporous structures conducive to ion transport and storage. Moreover, incorporating heteroatom doping (with elements such as sulfur, potassium, and nitrogen) has shown promise in enhancing surface interactions and facilitating the diffusion process through increased availability of active sites, thereby demonstrating the potential for improved storage capabilities. The electrochemical performance of these waste-derived carbon materials is evaluated across various configurations and electrolytes. Challenges and future directions are identified, highlighting the need for a deeper understanding of the microstructural characteristics that influence electrochemical performance and advocating for interdisciplinary research to achieve precise control over material properties. This review contributes to advancing electrode material technology and promotes environmental sustainability by repurposing industrial waste into valuable resources for energy storage. It underscores the potential of waste-derived carbon materials in sustainably meeting global energy storage demands.

Integrating Explicit and Implicit Fullerene Models into UNRES Force Field for Protein Interaction Studies

Fullerenes, particularly C60, exhibit unique properties that make them promising candidates for various applications, including drug delivery and nanomedicine. However, their interactions with biomolecules, especially proteins, remain not fully understood. This study implements both explicit and implicit C60 models into the UNRES coarse-grained force field, enabling the investigation of fullerene-protein interactions without the need for restraints to stabilize protein structures. The UNRES force field offers computational efficiency, allowing for longer timescale simulations while maintaining accuracy. Five model proteins were studied: FK506 binding protein, HIV-1 protease, intestinal fatty acid binding protein, PCB-binding protein, and hen egg-white lysozyme. Molecular dynamics simulations were performed with and without C60 to assess protein stability and investigate the impact of fullerene interactions. Analysis of contact probabilities reveals distinct interaction patterns for each protein. FK506 binding protein (1FKF) shows specific binding sites, while intestinal fatty acid binding protein (1ICN) and uteroglobin (1UTR) exhibit more generalized interactions. The explicit C60 model shows good agreement with all-atom simulations in predicting protein flexibility, the position of C60 in the binding pocket, and the estimation of effective binding energies. The integration of explicit and implicit C60 models into the UNRES force field, coupled with recent advances in coarse-grained modeling and multiscale approaches, provides a powerful framework for investigating protein-nanoparticle interactions at biologically relevant scales without the need to use restraints stabilizing the protein, thus allowing for large conformational changes to occur. These computational tools, in synergy with experimental techniques, can aid in understanding the mechanisms and consequences of nanoparticle-biomolecule interactions, guiding the design of nanomaterials for biomedical applications.

Uranyl Affinity between Uranyl Cation and Different Kinds of Monovalent Anions: Density Functional Theory and Quantitative Structure-Property Relationship Model

In order to design effective extractants for uranium extraction from seawater, it is imperative to acquire a more comprehensive understanding of the bonding properties between the uranyl cation (UO22+) and various ligands. Therefore, we employed density functional theory to investigate the complexation reactions of UO22+ with 29 different monovalent anions (L-1), exploring both mono- and bidentate coordination. We proposed a novel concept called "uranyl affinity" (Eua) to facilitate the establishment of a standardized scale for assessing the ease or difficulty of coordination bond formation between UO22+ and diverse ligands. Furthermore, we conducted an in-depth investigation into the underlying mechanisms involved. During the process of uranyl complex [(UO2L)+] formation, lone pair electrons from the coordinating atom in L- are transferred to either the lowest unoccupied molecular degenerate orbitals 1ϕu or 1δu of the uranyl ion, which originate from the uranium atom's 5f unoccupied orbitals. In light of discussion concerning the mechanisms of coordination bond formation, quantitative structure-property relationship analyses were conducted to investigate the correlation between Eua and various structural descriptors associated with the 29 ligands under investigation. This analysis revealed distinct patterns in Eua values while identifying key influencing factors among the different ligands.

Adsorbents from rice husk and shrimp shell for effective removal of heavy metals and reactive dyes in water

Widespread contamination by heavy metals (HMs) and dyes poses a major health risk to people and ecosystems requiring effective treatment. In this work, rice husk (RH) and shrimp shells were extracted to obtain amorphous silica and chitosan, respectively, which were utilized to produce nano-chitosan-coated silica (NCCS). To ensure the stability of the nanoparticles, silica was freeze-dried after being coated with nano-chitosan. Functional groups (-NH2, -OH, P]O) from chitosan nanoparticles (CNPs) were introduced to the surface of silica during this process. Dyes such as brilliant green (BG), methylene blue (MB) and reactive brown (RB) as well as HMs (Cr6+, Pb2+, Cd2+, Ni2+) were removed by adsorbents. CNPs showed the highest adsorption capacity for RB (59.52 mg/g) among dyes and Cr6+ (42.55 mg/g) among HMs. CNPs showed the highest adsorption capacity for HMs among different adsorbents. Although NCCS and CNPs showed similar adsorption capabilities for HMs and dyes, NCCS showed the best stability. The adsorption performance decreased as RB > Cr6+ > MB > BG > Pb2+ > Cd2+ > Ni2+. The adsorption reactions followed both pseudo-first-order and second-order kinetics, and was spontaneous from thermodynamic analysis. In summary, the waste-derived adsorbents demonstrated excellent potential for removing HMs and dyes from water, while supporting effective management solid waste.

Enhanced Charge Separation in Single Atom Cobalt Based Graphitic Carbon Nitride: Time Domain Ab Initio Analysis

In recent years, single atom catalysts have been at the forefront of energy conversion research, particularly in the field of catalysis. Carbon nitrides offer great potential as hosts for stabilizing metal atoms due to their unique electronic structure. We use ab initio nonadiabatic molecular dynamics to study photoexcitation dynamics in single atom cobalt based graphitic carbon nitride. The results elucidate the positive effect of the doped cobalt atom on the electronic structure of GCN. Cobalt doping produces filled midgap states that serve as oxidation centers, advantageous for various redox reactions. The presence of midgap states enables the harvesting of longer wavelength photons, thereby extending the absorption range of solar light. Although doping accelerates charge relaxation overall, charge recombination is significantly slower than charge separation, creating beneficial conditions for catalysis applications. The simulations reveal the detailed microscopic mechanism underlying the improved performance of the doped system due to atomic defects and demonstrate an effective charge separation strategy to construct highly efficient and stable photocatalytic two-dimensional materials.

Relation between Double Layer Structure, Capacitance, and Surface Tension in Electrowetting of Graphene and Aqueous Electrolytes

Deciphering the mechanisms of charge storage on carbon-based materials is pivotal for the development of next-generation electrochemical energy storage systems. Graphene, the building block of graphitic electrodes, is an ideal model for probing such processes on a fundamental level. Herein, we investigate the thermodynamics of the graphene/aqueous electrolyte interface by utilizing a multiscale quantum mechanics-classical molecular dynamics (QM/MD) approach to provide insights into the effect of alkali metal ion (Li+) concentration on the interfacial tension (γSL) of the charged graphene/electrolyte interface. We demonstrate that the dependence of γSL on the applied surface charge exhibits an asymmetric behavior relative to the neutral surface. At the positively charged graphene sheet, the electrowetting response is amplified by electrolyte concentration, resulting in a strongly hydrophilic surface. On the contrary, at negative potential bias, γSL shows a weaker response to the charging of the electrode. Changes in γSL greatly affect the total areal capacitance predicted by the Young-Lippmann equation but have a negligible impact on the simulated total areal capacitance, indicating that the EDL structure is not directly correlated with the wettability of the surface and different interfacial mechanisms drive the two phenomena. The proposed model is validated experimentally by studying the electrowetting response of highly oriented pyrolytic graphite over a wide range of electrolyte concentrations. Our work presents the first combined theoretical and experimental study on electrowetting using carbon surfaces, introducing new conceptual routes for the investigation of wetting phenomena under potential bias.

Nanocellulose: A comprehensive review investigating its potential as an innovative material for water remediation

Rapid growth in industrialization sectors, the wastewater treatment plants become exhausted and potentially not able to give desirable discharge standards. Many industries discharge the untreated effluent into the water bodies which affects the aquatic diversity and human health. The effective disposal of industrial effluents thus has been an imperative requirement. For decades nanocellulose based materials gained immense attraction towards application in wastewater remediation and emerged out as a new biobased nanomaterial. It is light weighted, cost effective, mechanically strong and easily available. Large surface area, versatile surface functionality, biodegradability, high aspect ratio etc., make them suitable candidate in this field. Majorly cellulose based nanomaterials are used in the form of cellulose nanocrystals (CNCs), cellulose nanofibers (CNFs), or bacterial nanocellulose (BNC). This review specifically describes about a variety of extraction methods to produced nanocellulose and also discusses the modification of nanocellulose by adding functionalities in its surface chemistry. We majorly focus on the utilization of nanocellulose based materials in water remediation for the removal of different contaminants such as dyes, heavy metals, oil, microbial colony etc. This review mainly emphasizes in ray of hope towards nanocellulose materials to achieve more advancement in the water remediation fields.

Switchable NaCl cages via a MWCNTs/Ni[Fe(CN)6]2 nanocomposite for high performance desalination

With the application of nanomaterials in seawater desalination technology increasing, the adjustable characteristics of carbon-based nanomaterials make it possible to use multiwalled carbon nanotube (MWCNT) materials in seawater desalination technology. In this study, Ni[Fe(CN)6]2 is loaded onto the inner wall of MWCNTs by the co-precipitation method to prepare MWCNTs with variable pore size, making it a switchable cage for NaCl. During the procedure, most of the Ni[Fe(CN)6]2 is transferred to the outer surface of the MWCNTs after adsorption, and NaCl is stored inside the MWCNTs (which have been proved by characterization); at the same time, Ni can improve the cell stability of Ni[Fe(CN)6]2. The effect of adsorbent reaction time and addition amount on the desalination performance of MWCNTs/Ni[Fe(CN)6]2 has been tested. According to the results, the best desalination performance of MWCNTs/Ni[Fe(CN)6]2 is 1354.6 mg g-1 when the reaction time is 0.5 h and the addition amount is 20 mg. After 3 cycles of adsorption and desorption, its desalting performance decreased to 242.3 mg g-1.

O2 plasma-modified carbon nanotube for sulfamethoxazole degradation via peroxymonosulfate activation: Synergism of radical and non-radical pathways boosting water decontamination and detoxification

Sulfamethoxazole (SMX), a widely used antibiotic, has triggered increasing attention due to its extensive detection in wastewater effluent, causing serious ecological threats. Herein, a carbon-based heterogeneous catalyst was developed by the O2 plasma-etching process, regulating oxygen-containing functional groups (OFGs) and defects of carbon nanotubes (O-CNT) to activate peroxymonosulfate (PMS) for highly efficient SMX abatement. Through adjusting the etching time, the desired active sites (i.e., C=O and defects) could be rationally created. Experiments collectively suggested that the degradation of SMX was owing to the contribution of synergism by radical (•OH (17.3%) and SO4•- (39.3%)) and non-radical pathways (1O2, 43.4%), which originated from PMS catalyzed by C=O and defects. In addition, the possible degradation products and transformation pathways of SMX in the system were inferred by combining the Fukui function calculations and the LC-MS/MS analysis. And the possible degradation pathway was effective in reducing the environmental toxicity of SMX, as evidenced by the T.E.S.T. software and the micronucleus experiment on Vicia faba root tip. Also, the catalytic system exhibited excellent performance for different antibiotics removal, such as amoxicillin (AMX), carbamazepine (CBZ) and isopropylphenazone (PRP). This study is expected to provide an alternative strategy for antibiotics removal in water decontamination and detoxification.

Doping matters in carbon nanomaterial efficiency in environmental remediation

Carbon nanomaterials (CNMs) are rapidly emerging in materials science research due to their widespread environmental applications. They are useful for environmental pollutants' remediation through various methods. Heteroatom doping resulted in reliable approaches to overcome pristine CNMs challenges. The engineering of the dopants is believed to be a promising route to improve the efficiency of CNMs in environmental remediation. The idea of doping has been attractive since it allows the control of electronic properties due to the electron transfer between dopants and the host material and the dopants along with the bonding between analogous atoms and carbon atoms. This mini-review, through computational and experimental studies, puts special emphasis on the role of doping different CNMs as an efficient approach to enhance the environmental remediation.

A review on adsorption of heavy metals from wastewater using carbon nanotube and graphene-based nanomaterials

The rampant rise in world population, industrialization, and urbanization expedite the contamination of water sources. The presence of the non-biodegradable character of heavy metals in waterways badly affects the ecological balance. In this modern era, the unavailability of getting clear water as well as the downturn in water quality is a major concern. Therefore, the effective removal of heavy metals has become much more important than before. In recent years, the attention to better wastewater remediation was directed towards adsorption techniques with novel adsorbents such as carbon nanomaterials. This review paper primarily emphasizes the fundamental concepts, structures, and unique surface properties of novel adsorbents, the harmful effects of various heavy metals, and the adsorption mechanism. This review will give an insight into the current status of research in the realm of sustainable wastewater treatment, applications of carbon nanomaterials, different types of functionalized carbon nanotubes, graphene, graphene oxide, and their adsorption capacity. The importance of MD simulations and density functional theory (DFT) in the elimination of heavy metals from aqueous media is also discussed. In addition to that, the effect of factors on heavy metal adsorption such as electric field and pressure is addressed.

Development of metal free carbon catalyst derived from Parthenium hysterophorus for the electrochemical detection of dopamine

Parthenium hysterophorus, one of the seven most hazardous weeds is widely known for its allergic, respiratory and skin-related disorders. It is also known to affect biodiversity and ecology. For eradication of the weed, its effective utilization for the successful synthesis of carbon-based nanomaterial is a potent management strategy. In this study, reduced graphene oxide (rGO) was synthesized from weed leaf extract through a hydrothermal-assisted carbonization method. The crystallinity and geometry of the as-synthesized nanostructure are confirmed from the X-ray diffraction study, while the chemical architecture of the nanomaterial is ascertained through X-ray photoelectron spectroscopy. The stacking of flat graphene-like layers with a size range of ∼200-300 nm is visualized through high-resolution transmission electron microscopy images. Further, the as-synthesized carbon nanomaterial is advanced as an effective and highly sensitive electrochemical biosensor for dopamine, a vital neurotransmitter of the human brain. Nanomaterial oxidizes dopamine at a much lower potential (0.13 V) than other metal-based nanocomposites. Moreover, the obtained sensitivity (13.75 and 3.31 μA μM-1 cm-2), detection limit (0.6 and 0.8 μM), the limit of quantification (2.2 and 2.7 μM) and reproducibility calculated through cyclic voltammetry/differential pulse voltammetry respectively outcompete many metal-based nanocomposites that were previously used for the sensing of dopamine. This study boosts the research on the metal-free carbon-based nanomaterial derived from waste plant biomass.

Nanoplatforms: The future of oral cancer treatment

Background and Aims

Cytotoxicity is a key disadvantage of using chemotherapeutic drugs to treat cancer. This can be overcome by encapsulating chemotherapeutic drugs in suitable carriers for targeted delivery, allowing them to be released only at the cancerous sites. Herein, we aim to review the recent scientific developments in the utilization of nanotechnology-based drug delivery systems for treating oral malignancies that can lead to further improvements in clinical practice.

Methods

A comprehensive literature search was conducted on PubMed, Google Scholar, ScienceDirect, and other notable databases to identify recent peer-reviewed clinical trials, reviews, and research articles related to nanoplatforms and their applications in oral cancer treatment.

Results

Nanoplatforms offer a revolutionary strategy to overcome the challenges associated with conventional oral cancer treatments, such as poor drug solubility, non-specific targeting, and systemic toxicity. These nanoscale drug delivery systems encompass various formulations, including liposomes, polymeric nanoparticles, dendrimers, and hydrogels, which facilitate controlled release and targeted delivery of therapeutic agents to oral cancer sites. By exploiting the enhanced permeability and retention effect, Nanoplatforms accumulate preferentially in the tumor microenvironment, increasing drug concentration and minimizing damage to healthy tissues. Additionally, nanoplatforms can be engineered to carry multiple drugs or a combination of drugs and diagnostic agents, enabling personalized and precise treatment approaches.

Conclusion

The utilization of nanoplatforms in oral cancer treatment holds significant promise in revolutionizing therapeutic strategies. Despite the promising results in preclinical studies, further research is required to evaluate the safety, efficacy, and long-term effects of nanoformulations in clinical settings. If successfully translated into clinical practice, nanoplatform-based therapies have the potential to improve patient outcomes, reduce side effects, and pave the way for more personalized and effective oral cancer treatments.

Next-generation viral nanoparticles for targeted delivery of therapeutics: Fundamentals, methods, biomedical applications, and challenges

INTRODUCTION

Viral nanoparticles (VNPs) are virus-based nanocarriers that have been studied extensively and intensively for biomedical applications. However, their clinical translation is relatively low compared to the predominating lipid-based nanoparticles. Therefore, this article describes the fundamentals, challenges, and solutions of the VNP-based platform, which will leverage the development of next-generation VNPs.

AREAS COVERED

Different types of VNPs and their biomedical applications are reviewed comprehensively. Strategies and approaches for cargo loading and targeted delivery of VNPs are examined thoroughly. The latest developments in controlled release of cargoes from VNPs and their mechanisms are highlighted too. The challenges faced by VNPs in biomedical applications are identified, and solutions are provided to overcome them.

EXPERT OPINION

In the development of next-generation VNPs for gene therapy, bioimaging and therapeutic deliveries, focus must be given to reduce their immunogenicity, and increase their stability in the circulatory system. Modular virus-like particles (VLPs) which are produced separately from their cargoes or ligands before all the components are coupled can speed up clinical trials and commercialization. In addition, removal of contaminants from VNPs, cargo delivery across the blood brain barrier (BBB), and targeting of VNPs to organelles intracellularly are challenges that will preoccupy researchers in this decade.

Recent Advances and Challenges in Textile Electrodes for Wearable Biopotential Signal Monitoring: A Comprehensive Review

The technology of wearable medical equipment has advanced to the point where it is now possible to monitor the electrocardiogram and electromyogram comfortably at home. The transition from wet Ag/AgCl electrodes to various types of gel-free dry electrodes has made it possible to continuously and accurately monitor the biopotential signals. Fabrics or textiles, which were once meant to protect the human body, have undergone significant development and are now employed as intelligent textile materials for healthcare monitoring. The conductive textile electrodes provide the benefit of being breathable and comfortable. In recent years, there has been a significant advancement in the fabrication of wearable conductive textile electrodes for monitoring biopotential signals. This review paper provides a comprehensive overview of the advances in wearable conductive textile electrodes for biopotential signal monitoring. The paper covers various aspects of the technology, including the electrode design, various manufacturing techniques utilised to fabricate wearable smart fabrics, and performance characteristics. The advantages and limitations of various types of textile electrodes are discussed, and key challenges and future research directions are identified. This will allow them to be used to their fullest potential for signal gathering during physical activities such as running, swimming, and other exercises while being linked into wireless portable health monitoring systems.

Toxicity and Biotransformation of Carbon-Based Nanomaterials in Marine Microalgae Heterosigma akashiwo

This work is related to the environmental toxicology risk assessment and evaluation of the possible transformation of carbon-based nanomaterials (CNMs) after contact with marine microalgae. The materials used in the study represent common and widely applied multi-walled carbon nanotubes (CNTs), fullerene (C60), graphene (Gr), and graphene oxide (GrO). The toxicity was evaluated as growth rate inhibition, esterase activity, membrane potential, and reactive oxygen species generation changes. The measurement was performed with flow cytometry after 3, 24, 96 h, and 7 days. The biotransformation of nanomaterials was evaluated after 7 days of microalgae cultivation with CNMs by FTIR and Raman spectroscopy. The calculated toxic level (EC50 in mg/L, 96 h) of used CNMs reduced in the following order: CNTs (18.98) > GrO (76.77) > Gr (159.40) > C60 (414.0). Oxidative stress and membrane depolarization were the main toxic action of CNTs and GrO. At the same time, Gr and C60 decreased the toxic action with time and had no negative impact on microalgae after 7 days of exposure even at the concentration of 125 mg/L. Moreover, C60 and Gr after 7 days of contact with microalgae cells obtained structural deformations.

Cell membrane-coated nanomaterials for cancer therapy

With the development of nanotechnology, nanoparticles have emerged as a delivery carrier for tumor drug therapy, which can improve the therapeutic effect by increasing the stability and solubility and prolonging the half-life of drugs. However, nanoparticles are foreign substances for humans, are easily cleared by the immune system, are less targeted to tumors, and may even be toxic to the body. As a natural biological material, cell membranes have unique biological properties, such as good biocompatibility, strong targeting ability, the ability to evade immune surveillance, and high drug-carrying capacity. In this article, we review cell membrane-coated nanoparticles (CMNPs) and their applications to tumor therapy. First, we briefly describe CMNP characteristics and applications. Second, we present the characteristics and advantages of different cell membranes as well as nanoparticles, provide a brief description of the process of CMNPs, discuss the current status of their application to tumor therapy, summarize their shortcomings for use in cancer therapy, and propose future research directions. This review summarizes the research progress on CMNPs in cancer therapy in recent years and assesses remaining problems, providing scholars with new ideas for future research on CMNPs in tumor therapy.

Carbon nanomaterial-involved EMT and CSC in cancer

Carbon nanomaterials (CNMs) are ubiquitous in our daily lives because of the outstanding physicochemical properties. CNMs play curial parts in industrial and medical fields, however, the risks of CNMs exposure to human health are still not fully understood. In view of, it is becoming extremely difficult to ignore the existence of the toxicity of CNMs. With the increasing exploitation of CNMs, it's necessary to evaluate the potential impact of these materials on human health. In recent years, more and more researches have shown that CNMs are contributed to the cancer formation and metastasis after long-term exposure through epithelial-mesenchymal transition (EMT) and cancer stem cells (CSCs) which is associated with cancer progression and invasion. This review discusses CNMs properties and applications in industrial and medical fields, adverse effects on human health, especially the induction of tumor initiation and metastasis through EMT and CSCs procedure.

Removal of Typical PPCPs by Reverse Osmosis Membranes: Optimization of Treatment Process by Factorial Design

In this paper, the removal effect of reverse osmosis (RO) on three common pharmaceuticals and personal care products (PPCPs), including ibuprofen (IBU), carbamazepine (CBZ), and triclosan (TCS), were compared under different process conditions, and the removal rate of PPCPs, membrane flux, and PPCPs membrane adsorption capacity were analyzed. The removal rate increased with the increase of the influent concentration and pre-membrane pressure, while pH influenced the removal effect of different PPCPs by affecting the electrostatic interaction between pollutants and membranes. It was also found that the dynamic adsorption of PPCPs on RO membranes under different conditions complied with the pseudo-first-order reaction kinetic adsorption model. The maximum stable adsorption capacity and the adsorption rate of PPCPs on membranes under various conditions were simulated based on the model. Moreover, through factorial design, the removal rates of RO on IBU, CBZ, and TCS could reach 98.93%, 97.47%, and 99.01%, respectively, under the optimal conditions (with an influent concentration of 500 μg/L, pre-membrane pressure of 16 bar and pH = 10). By optimizing the process of removing PPCPs with the RO membrane method, the optimal process conditions of removing IBU, CBZ, and TCS with the RO membrane method were obtained, which provided reference conditions and data support for the practical application of removing PPCPs with the RO membrane method.

Nitrogen-doped biochar (N-doped BC) and iron/nitrogen co-doped biochar (Fe/N co-doped BC) for removal of refractory organic pollutants

The presence of refractory organic pollutants (ROPs) in the ecosystem is a serious concern because of their impact on environmental constituents as well as their known or suspected ecotoxicity and adverse health effects. According to previous studies, carbonaceous materials, such as biochar (BC), have been widely used to remove pollutants from ecosystems owing to their desirable features, such as relative stability, tunable porosity, and abundant functionalities. Nitrogen (N)-doping and iron/nitrogen (Fe/N) co-doping can tailor BC properties and provide supplementary functional groups as well as extensive active sites on the N-doped and Fe/N co-doped BC surface, which is advantageous for interaction with and removal of ROPs. This review investigates the impact of N-doped and Fe/N co-doped BC on the removal of ROPs through adsorption, activation oxidation, and catalytic reduction due to the synergistic Fe, N, and BC features that modify the physicochemical properties, surface functional groups, and persistent free radicals of BC to aid in the degradation of ROPs. Owing to the attractive properties of N-doped and Fe/N co-doped BCs for the removal of ROPs, this review focuses and evaluates previous experimental investigations on the manufacturing (including precursors and influencing parameters during manufacturing) and characterizations of N-doped and Fe/N co-doped BCs. Additionally, the effective applications and mechanisms of N-doped and Fe/N co-doped BCs in adsorption, activation oxidation, and reductive remediation of ROPs are investigated herein. Moreover, the application of N-doped and Fe/N co-doped BC for progressive environmental remediation based on their effectiveness against co-pollutants, regeneration, stability, affordability, and future research prospects are discussed.

Single-pulse real-time billion-frames-per-second planar imaging of ultrafast nanoparticle-laser dynamics and temperature in flames

Unburnt hydrocarbon flames produce soot, which is the second biggest contributor to global warming and harmful to human health. The state-of-the-art high-speed imaging techniques, developed to study non-repeatable turbulent flames, are limited to million-frames-per-second imaging rates, falling short in capturing the dynamics of critical species. Unfortunately, these techniques do not provide a complete picture of flame-laser interactions, important for understanding soot formation. Furthermore, thermal effects induced by multiple consecutive pulses modify the optical properties of soot nanoparticles, thus making single-pulse imaging essential. Here, we report single-shot laser-sheet compressed ultrafast photography (LS-CUP) for billion-frames-per-second planar imaging of flame-laser dynamics. We observed laser-induced incandescence, elastic light scattering, and fluorescence of soot precursors - polycyclic aromatic hydrocarbons (PAHs) in real-time using a single nanosecond laser pulse. The spatiotemporal maps of the PAHs emission, soot temperature, primary nanoparticle size, soot aggregate size, and the number of monomers, present strong experimental evidence in support of the theory and modeling of soot inception and growth mechanism in flames. LS-CUP represents a generic and indispensable tool that combines a portfolio of ultrafast combustion diagnostic techniques, covering the entire lifecycle of soot nanoparticles, for probing extremely short-lived (picoseconds to nanoseconds) species in the spatiotemporal domain in non-repeatable turbulent environments. Finally, LS-CUP's unparalleled capability of ultrafast wide-field temperature imaging in real-time is envisioned to unravel mysteries in modern physics such as hot plasma, sonoluminescence, and nuclear fusion.

Generation of high-valent iron-oxo porphyrin cation radicals on hemin loaded carbon nanotubes for efficient degradation of sulfathiazole

Hemin has attracted considerable interest as an efficient catalyst recently, however, its direct application is inefficient due to severe molecular aggregation. Immobilizing hemin on various supports is a feasible approach to address this issue. In this work, a CNTs-hemin catalyst was prepared by loading hemin onto multiwalled carbon nanotubes (CNTs) through ball milling. Compared with hemin, CNTs-hemin demonstrates remarkably enhanced performance in the peroxymonosulfate system, with a 650-fold improvement of apparent rate constant, reaching 97.8% degradation of sulfathiazole in 5 min. High-valent iron-oxo porphyrin cation ((Porp)^+•Fe^IV=O) radicals are proposed as the dominant reactive species in the CNTs-hemin/peroxymonosulfate system instead of sulfate radicals (SO₄^•-), hydroxyl radicals (•OH), superoxide radicals (O₂^•-) and singlet oxygen (¹O₂). More in-depth mechanisms reveal that the strong electron transfer between CNTs and hemin promotes the generation of (Porp)^+•Fe^IV=O radicals through a heterolysis pathway. This research enriches the understanding of the catalytic mechanism of supported biomimetic catalysts for PMS activation and provides a perspective on the role of support materials for catalytic activity.

Carbon-Based Nanomaterials for Catalytic Wastewater Treatment: A Review

Carbon-based nanomaterials (CBM) have shown great potential for various environmental applications because of their physical and chemical properties. The unique hybridization properties of CBMs allow for the tailored manipulation of their structures and morphologies. However, owing to poor solar light absorption, and the rapid recombination of photogenerated electron-hole pairs, pristine carbon materials typically have unsatisfactory photocatalytic performances and practical applications. The main challenge in this field is the design of economical, environmentally friendly, and effective photocatalysts. Combining carbonaceous materials with carbonaceous semiconductors of different structures results in unique properties in carbon-based catalysts, which offers a promising approach to achieving efficient application. Here, we review the contribution of CBMs with different dimensions, to the catalytic removal of organic pollutants from wastewater by catalyzing the Fenton reaction and photocatalytic processes. This review, therefore, aims to provide an appropriate direction for empowering improvements in ongoing research work, which will boost future applications and contribute to overcoming the existing limitations in this field.

Application of covalent organic frameworks and metal–organic frameworks nanomaterials in organic/inorganic pollutants removal from solutions through sorption-catalysis strategies

With the fast development of agriculture, industrialization and urbanization, large amounts of different (in)organic pollutants are inevitably discharged into the ecosystems. The efficient decontamination of the (in)organic contaminants is crucial to human health and ecosystem pollution remediation. Covalent organic frameworks (COFs) and metal–organic frameworks (MOFs) have attracted multidisciplinary research interests because of their outstanding physicochemical properties like high stability, large surface areas, high sorption capacity or catalytic activity. In this review, we summarized the recent works about the elimination/extraction of organic pollutants, heavy metal ions, and radionuclides by MOFs and COFs nanomaterials through the sorption-catalytic degradation for organic chemicals and sorption-catalytic reduction-precipitation-extraction for metals or radionuclides. The interactions between the (in)organic pollutants and COFs/MOFs nanomaterials at the molecular level were discussed from the density functional theory calculation and spectroscopy analysis. The sorption of organic chemicals was mainly dominated by electrostatic attraction, π-π interaction, surface complexation and H-bonding interaction, whereas the sorption of radionuclides and metal ions was mainly attributed to surface complexation, ion exchange, reduction and incorporation reactions. The porous structures, surface functional groups, and active sites were important for the sorption ability and selectivity. The doping or co-doping of metal/nonmetal, or the incorporation with other materials could change the visible light harvest and the generation/separation of electrons/holes (e−/h+) pairs, thereby enhanced the photocatalytic activity. The challenges for the possible application of COFs/MOFs nanomaterials in the elimination of pollutants from water were described in the end.

Engineering the Performance and Stability of Molybdenum Disulfide for Heavy Metal Removal

Molybdenum disulfide (MoS₂) has recently emerged as one of the most promising water nano-based adsorbent materials for heavy metal removal with the potential to provide an alternative to conventional water decontamination technologies. In this study, we demonstrate the trade-off between mercuric removal capacity and overall MoS₂ adsorbent stability, both driven by MoS₂ synthesis parameters. A bottom-up hydrothermal synthesis setup at various growth temperatures was employed to grow flower-like MoS₂ films onto planar alumina supports. A thorough material characterization suggests that an increase in growth temperature from 150 to 210 °C results in higher MoS₂ crystallinity. Interestingly, elevated growth temperatures resulted in poor mercuric removal (525 mg g^-1, K = 2.2 × 10^-3 h^-1), yet showed enhanced chemical stability (i.e., minimal molybdenum leaching during exposure to mercury). On the other hand, low growth temperatures produce amorphous supported MoS₂, exhibiting superb mercuric removal capabilities (5158 mg g^-1, K = 36.1 × 10^-3 h^-1) but displaying poor stability, resulting in substantial byproduct molybdate leaching. Mercuric removal by crystalline MoS₂ was accomplished by adsorption and electrostatic attraction-based removal mechanisms, whereas redox reactions and HgS crystallization-based removal mechanisms were more dominant when using amorphous MoS₂ for mercury removal. Overall, our study provides essential insights into the delicate balance between MoS₂ mercuric removal capabilities and MoS₂ degradation, both related to material synthesis growth conditions. Employment of nano-enabled water treatments in general, and MoS₂ for heavy metal removal in particular, requires us to better understand these important fundamental trade-off behaviors to achieve sustainable, effective, and responsible implementation of nanotechnologies in large scale systems.

An endophytic fungus, Penicillium simplicissimum conjugated with C60 fullerene for its potential antimitotic, anti-inflammatory, anticancer and photodegradation activities

In the present study, endophytic fungus, Penicillium simplicissimum isolated from Loranthus micranthus was used to analyze phytochemical studies by qualitative and GC-MS methods. The endophytic fungus P. simplicissimum yielded novel compound penisimplicissin identified through GC-MS studies. Further, P. simplicissimum was conjugated with C60 fullerene nanoparticles (Ps-FNPs) were verified using UV-vis spectra, XRD, FTIR, DLS, EDX and SEM. Ps-FNPs was confirmed using UV-visible spectra with a peak at 260 nm. The IR bands were recorded at 2085, 1428, 1181, 661, 652, 644, 628, and 604 cm-1. The Ps-FNPs treated cells showed a nucleolar shrinkage and cell arrest atprophase, binuclear and multinucleolar cells, a chromosomal bridge and diversion at anaphase was observed, whereas, chromosomal fragment and abnormal distribution at metaphase stage. The Ps-FNPs exhibited a noteworthy anticancer activity on lung cancer cell line H1975 through cytotoxicity. The cytotoxicity was induced by increasing caspase-3, 7, and 9 activities and also showed highest inhibition in xanthine oxidase and COX-II assay proved good anti-inflammatory activity. Ps-FNPs have been extensively studied for photocatalytic activity test against Rhodamine B, Methylene blue and nigrosine showed potential dye degradation in the presence of sunlight proved to be novel photocatalysts. With all the results recorded, Ps-FNPs also have a synergetic effect having on anti-mitotic, anticancer, anti-inflammation potential and photocatalytic degradation of dyes. Hence, the conjugated Ps-FNPs could be one of the potent nano-drug formulations in future. Thus, the present study gives a clear idea of the multifaceted therapeutic and photocatalytic applications.

Nanomaterials for optical biosensors in forensic analysis

Biosensors are compact analytical devices capable of transducing a biological interaction event into a measurable signal outcome in real-time. They can provide sensitive and affordable analysis of samples without the need for additional laboratory equipment or complex preparation steps. Biosensors may be beneficial for forensic analysis as they can facilitate large-scale high-throughput, sensitive screening of forensic samples to detect target molecules that are of high evidential value. Nanomaterials are gaining attention as desirable components of biosensors that can enhance detection and signal efficiency. Biosensors that incorporate nanomaterials within their design have been widely reported and developed for medical purposes but are yet to find routine employment within forensic science despite their proven potential. In this article, key examples of the use of nanomaterials within optical biosensors designed for forensic analysis are outlined. Their design and mechanism of detection are both considered throughout, discussing how nanomaterials can enhance the detection of the target analyte. The critical evaluation of the optical biosensors detailed within this review article should help to guide future optical biosensor design via the incorporation of nanomaterials, for not only forensic analysis but alternative analytical fields where such biosensors may prove a valuable addition to current workflows.

Reusable Sugar-Based Gelator for Marine Oil-Spill Recovery and Waste Water Treatment

In this work, the gelation ability of a series of novel pyridine-based glucose tailored gelators (DPHAEN, DPHABN, and DPHAHN) with a flexible alkyl chain has been examined in binary solvent mixtures using a number of techniques, for example, UV spectroscopy, FT-IR spectroscopy, NMR spectroscopy, rheology measurement, SEM, XRD, and computational study. Proposed herein is an environment-friendly method to realize toxic dye separation and oil/water separation. It has been found that gels in a selective binary solvent mixture are efficient reusable absorbers of toxic dye molecules. A new gravitational force-driven, simple one-step, toxic dye removal and oil-water separation method is presented for sustainable filtration of waste water and simultaneous collection of oil. The gel column also showed high stability and reusability over repeated use and can be easily scaled for efficient clean-up of a large number of toxic dyes and oil spills present in water. Studies also exposed that the gel column can simultaneously separate dye molecules and mineral oils from water. This simple, green, and efficient method overcomes a nontrivial hurdle for environmentally safe separation of toxic dyes as well as oil/water mixtures and offers insights into the design of advanced materials for practical oil/water separation.

Regulation of defects and nitrogen species on carbon nanotube by plasma-etching for peroxymonosulfate activation: Inducing non-radical/radical oxidation of organic contaminants

The structural defects and heteroatom dopants of carbonaceous materials play critical roles in their activation of peroxymonosulfate (PMS) for organic pollutants' removal. This study uses plasma-etching technology to control the levels of structural defects and nitrogen species in nitrogen-doped carbon nanotubes (N-CNTs) for excellent PMS activation. The vacancy defects, CO, pyrrolic N and graphitic N could be rationally designed by controlling the plasma-etching time. Obviously, the I_D/I_G (from 0.56 to 0.94) and CO contents (from 0.07 to 0.44 at%) of N-CNTs increase with rising etching time, exhibiting good linear positive correlations with phenol oxidation rates. Furthermore, through active species identification, quantitative structure-activity relationships analysis and theoretical calculations, vacancy defects (adsorbing PMS O1 site) and CO are confirmed to be the active sites for the generation of ¹O₂, which is major pathway (82%) for phenol degradation. While radicals induced by pyrrolic N and graphitic N adsorbing PMS O2 site are the minor pathway (18%). Overall, this study sheds new light on the crucial roles of defects and N species in inducing PMS non-radical/radical activation by carbocatalyst via efficiently controlled plasma-etching technology.

Nanomaterial Gas Sensors for Biosensing Applications: A Review

BACKGROUND

Nanomaterial is one of the most used materials for various gas sensing applications to detect toxic gases, human breath, and other specific gas sensing. One of the most important applications of nanomaterial based gas sensors is biosensing applications. In this review article, the gas sensors for biosensing are discussed on the basis of crystalline structure and different categories of nanomaterial.

METHODS

In this paper, firstly, rigorous efforts have been made to find out research questions by going through a structured and systematic survey of available peer reviewed high quality articles in this field. The papers related to nanomaterial based biosensors are then reviewed qualitatively to provide substantive findings from the recent developments in this field.

RESULTS

In this mini-review article, firstly, classifications of nanomaterial gas sensors have been presented on the basis of the crystalline structure of nanomaterial and different types of nanomaterial available for biosensing applications. Further, the gas sensors based on nanomaterial for biosensing applications are collected and reviewed in terms of their performance parameters such as sensing material used, target gas component, detection ranges (ppm-ppb), response time, operating temperature and method of detection, etc. The different nanomaterials possess slightly different sensing and morphological properties due to their structure; therefore, it can be said that a nanomaterial must be selected carefully for a particular application. The 1D nanomaterials show the best selectivity and sensitivity for gases available in low concentration ranges due to their miniaturised structure compared to 2D and 3D nanomaterials. However, these 2D and 3D nanomaterials also so good sensing properties compared to bulk semiconductor materials. The polymer and nanocomposites which are also discussed in this patent article have opened the door for future research and have great potential for new generation gas sensors for detecting biomolecules.

CONCLUSION

These nanomaterials extend great properties towards sensing the application of different gases for a lower concentration of particular gas particles. Nano polymer and nanocomposites have great potential to be used as gas sensors for the detection of biomolecules.

Calcium as an innovative and effective catalyst for the synthesis of graphene-like materials from cellulose

Pyrolysis of lignocellulosic biomass (hard carbon) produces poorly graphitic biochar. In this study, nano-structured biochars were produced from microcrystalline cellulose using calcium as a non-conventional catalyst. Calcium is abundant, environmental-friendly and widely accessible. Graphitization of calcium-impregnated cellulose was carried out at 1800 °C, a temperature below 2000 °C where the graphitization usually occurs. XRD, Raman spectroscopy, high-resolution TEM together with the in-house numerical tool developed enable the quantification of the graphene fringes in the biochars. The non-impregnated cellulose biochar was composed of short and poorly stacked graphene fringes. The impregnation with 2 wt.% of calcium led to the conversion of the initial structure into a well-organized and less defective graphene-like one. The graphene-like structures obtained were composed of tens of stacked graphene fringes with a crystallite size up to 20 nm and an average interlayer spacing equal to 0.345 nm, close to the reference value of standard hexagonal graphite (0.3354 nm). The increase of the calcium concentration did not significantly improve the crystallite sizes of the graphene-like materials but rather drastically improved their rate. Our results propose a mechanism and provide new insights on the synthesis of graphene-like materials from bio-feedstocks using calcium where the literature is focused on transition metals such as iron and nickel among others. The decrease of the graphitization temperature below 2000 °C should lower the production cost as well as the environmental impact of the thermal graphene-like materials synthesis using biomass. This finding should stimulate further research in the field and broaden the application perspectives.

Emerging applications of nanotechnology in context to immunology: A comprehensive review

Numerous benefits of nanotechnology are available in many scientific domains. In this sense, nanoparticles serve as the fundamental foundation of nanotechnology. Recent developments in nanotechnology have demonstrated that nanoparticles have enormous promise for use in almost every field of life sciences. Nanoscience and nanotechnology use the distinctive characteristics of tiny nanoparticles (NPs) for various purposes in electronics, fabrics, cosmetics, biopharmaceutical industries, and medicines. The exclusive physical, chemical, and biological characteristics of nanoparticles prompt different immune responses in the body. Nanoparticles are believed to have strong potential for the development of advanced adjuvants, cytokines, vaccines, drugs, immunotherapies, and theranostic applications for the treatment of targeted bacterial, fungal, viral, and allergic diseases and removal of the tumor with minimal toxicity as compared to macro and microstructures. This review highlights the medical and non-medical applications with a detailed discussion on enhanced and targeted natural and acquired immunity against pathogens provoked by nanoparticles. The immunological aspects of the nanotechnology field are beyond the scope of this Review. However, we provide updated data that will explore novel theragnostic immunological applications of nanotechnology for better and immediate treatment.

A Review of the Fabrication Methods, Testing, and Performance of Face Masks

Improvement in the performance and compatibility of face masks has remained the focus of researchers in recent years, especially after the emergence of the COVID pandemic. Although a lot of progress in the design, tolerability, and comfort of the mask has been reported, there are certain limitations, requiring further improvement. The present review aims to highlight the filtration efficacy, comfort, and associated characteristic of various types of face masks and respirators as a function of their design and structure. In addition, the air pollutants, their adverse effects on health, certified respirators, and face masks are also discussed. The present review also provides an insight into different types of commercially available face masks in terms of their materials, filtration efficiency, and limitations. The role of emerging trends (such as nanotechnology and high-performance polymers) in the improvement and development of face masks and respirators is also discussed.

Carbon nanomaterials for the detection of pesticide residues in food: A review

In agricultural fields, pesticides are widely used, but their residual presence in the environment poses a threat to humans, animals, insects, and ecosystems. The overuse of pesticides for pest control, enhancement of crop yield, etc. leaves behind a significant residual amount in the environment. Various robust, reliable, and reusable methods using a wide class of composites have been developed for the monitoring and controlling of pesticides. Researchers have discovered that carbon nanomaterials have a wide range of characteristics such as high porosity, conductivity and easy electron transfer that can be successfully used to detect pesticide residues from food. This review emphasizes the role of carbon nanomaterials in the field of pesticide residue analysis in different food matrices. The carbon nanomaterials including carbon nanotubes, carbon dots, carbon nanofibers, graphene/graphene oxides, and activated carbon fibres are discussed in the review. In addition, the review examines future prospects in this research area to help improve detection techniques for pesticides analysis.

An overview of nanomaterial-based novel disinfection technologies for harmful microorganisms: Mechanism, synthesis, devices and application

Harmful microorganism (e.g., new coronavirus) based infection is the most important security concern in life sciences and healthcare. This article aims to provide a state-of-the-art review on the development of advanced technology based on nanomaterial disinfection/sterilization techniques (NDST) for the first time including the nanomaterial types, disinfection techniques, bactericidal devices, sterilization products, and application scenarios (i.e., water, air, medical healthcare), with particular brief account of bactericidal behaviors referring to varied systems. In this emerging research area spanning the years from 1998 to 2021, total of ~200 publications selected for the type of review paper and research articles were reviewed. Four typical functional materials (namely type of metal/metal oxides, S-based, C-based, and N-based) with their development progresses in disinfection/sterilization are summarized with a list of synthesis and design. Among them, the widely used silver nanoparticles (AgNPs) are considered as the most effective bacterial agents in the type of nanomaterials at present and has been reported for inactivation of viruses, fungi, protozoa. Some methodologies against (1) disinfection by-products (DBPs) in traditional sterilization, (2) noble metal nanoparticles (NPs) agglomeration and release, (3) toxic metal leaching, (4) solar spectral response broadening, and (5) photogenerated e^-/h⁺ pairs recombination are reviewed and discussed in this field, namely (1) alternative techniques and nanomaterials, (2) supporter anchoring effect, (3) nonmetal functional nanomaterials, (4) element doping, and (5) heterojunction constructing. The feasible strategies in the perspective of NDST are proposed to involve (1) non-noble metal disinfectors, (2) multi-functional nanomaterials, (3) multi-component nanocomposite innovation, and (4) hybrid techniques for disinfection/sterilization system. It is promising to achieve 100% bactericidal efficiency for 10⁸ CFU/mL within a short time of less than 30 min.

Significance of Non-DLVO Interactions on the Co-Transport of Functionalized Multiwalled Carbon Nanotubes and Soil Nanoparticles in Porous Media

Derjaguin-Landau-Verwey-Overbeek (DLVO) theory is typically used to quantify surface interactions between engineered nanoparticles (ENPs), soil nanoparticles (SNPs), and/or porous media, which are used to assess environmental risk and fate of ENPs. This study investigates the co-transport behavior of functionalized multiwalled carbon nanotubes (MWCNTs) with positively (goethite nanoparticles, GNPs) and negatively (bentonite nanoparticles, BNPs) charged SNPs in quartz sand (QS). The presence of BNPs increased the transport of MWCNTs, but GNPs inhibited the transport of MWCNTs. In addition, we, for the first time, observed that the transport of negatively (BNPs) and positively (GNPs) charged SNPs was facilitated by the presence of MWCNTs. Traditional mechanisms associated with competitive blocking, heteroaggregation, and classic DLVO calculations cannot explain such phenomena. Direct examination using batch experiments and Fourier transform infrared (FTIR) spectroscopy, asymmetric flow field flow fractionation (AF4) coupled to UV and inductively coupled plasma mass spectrometry (AF4-UV-ICP-MS), and molecular dynamics (MD) simulations demonstrated that MWCNTs-BNPs or MWCNT-GNPs complexes or aggregates can be formed during co-transport. Non-DLVO interactions (e.g., H-bonding and Lewis acid-base interaction) helped to explain observed MWCNT deposition, associations between MWCNTs and both SNPs (positively or negatively), and co-transport. This research sheds novel insight into the transport of MWCNTs and SNPs in porous media and suggests that (i) mutual effects between colloids (e.g., heteroaggregation, co-transport, and competitive blocking) need to be considered in natural soil; and (ii) non-DLVO interactions should be comprehensively considered when evaluating the environmental risk and fate of ENPs.

Addressing a future pandemic: how can non-biological complex drugs prepare us for antimicrobial resistance threats?

Loss of effective antibiotics through antimicrobial resistance (AMR) is one of the greatest threats to human health. By 2050, the annual death rate resulting from AMR infections is predicted to have climbed from 1.27 million per annum in 2019, up to 10 million per annum. It is therefore imperative to preserve the effectiveness of both existing and future antibiotics, such that they continue to save lives. One way to conserve the use of existing antibiotics and build further contingency against resistant strains is to develop alternatives. Non-biological complex drugs (NBCDs) are an emerging class of therapeutics that show multi-mechanistic antimicrobial activity and hold great promise as next generation antimicrobial agents. We critically outline the focal advancements for each key material class, including antimicrobial polymer materials, carbon nanomaterials, and inorganic nanomaterials, and highlight the potential for the development of antimicrobial resistance against each class. Finally, we outline remaining challenges for their clinical translation, including the need for specific regulatory pathways to be established in order to allow for more efficient clinical approval and adoption of these new technologies.

Mechanism for selective binding of aromatic compounds on oxygen-rich graphene nanosheets based on molecule size/polarity matching

Selective binding of organic compounds is the cornerstone of many important industrial and pharmaceutical applications. Here, we achieved highly selective binding of aromatic compounds in aqueous solution and gas phase by oxygen-enriched graphene oxide (GO) nanosheets via a previously unknown mechanism based on size matching and polarity matching. Oxygen-containing functional groups (predominately epoxies and hydroxyls) on the nongraphitized aliphatic carbons of the basal plane of GO formed highly polar regions that encompass graphitic regions slightly larger than the benzene ring. This facilitated size match-based interactions between small apolar compounds and the isolated aromatic region of GO, resulting in high binding selectivity relative to larger apolar compounds. The interactions between the functional group(s) of polar aromatics and the epoxy/hydroxyl groups around the isolated aromatic region of GO enhanced binding selectivity relative to similar-sized apolar aromatics. These findings provide opportunities for precision separations and molecular recognition enabled by size/polarity match-based selectivity.