Liposomal Incorporation of Lavandin Essential Oil by a Thin-Film Hydration Method and by Particles from Gas-Saturated Solutions

Sonophoresis mediated diffusion of caffeine loaded Transcutol® enriched cerosomes for topical management of cellulite

The goal of this research was to augment the deposition of caffeine loaded Transcutol® enriched cerosomes (TECs) gel for efficient topical treatment of cellulite utilizing the sonophoresis technique. Caffeine-loaded TECs were prepared using thin film hydration method applying 23 factorial design to study the impact of different factors, each with two levels on the entrapment efficiency (EE%), particle size (PS), polydispersity index (PDI), and zeta potential (ZP) of the formulated TECs. The studied factors were cetyl trimethyl ammonium bromide (CTAB) amount (mg) (X1), phosphatidylcholine (PC) amount (mg) (X2), and Transcutol® amount (mg) (X3). Design-Expert® software was utilized to determine the optimum TECs formulation. Afterward, the optimum TECs formulation was loaded into a gel and subjected to extra investigations. The optimum TECs formulation was (TEC5) which was prepared using 10 mg of CTAB, 150 mg of PC, and 10 mg of Transcutol®. TEC5 presented EE% of 87.44 ± 0.14 %, PS of 308.60 ± 13.38 nm, PDI of 0.455 ± 0.030, and ZP of 50.20 ± 1.55 mV. TEC5 had a fiber-like morphology, with elongated tubules of ceramide. Further, the optimum TECs formulation showed a high stability profile. Moreover, an in vivo dermatokinetic study showed superior deposition of caffeine from TEC5 gel coupled with the sonophoresis on rat skin compared to TEC5 gel and caffeine gel. Moreover, the histopathological study of TEC5 on rat skin confirmed the non-irritant nature of TEC 5 gel mediated by ultrasonic waves through the skin. Overall, the outcomes exposed the obvious superiority of sonophoresis delivered TECs-gel for topical delivery of caffeine for cellulite management.

Progress of nanopreparation technology applied to volatile oil drug delivery systems

Traditional Chinese medicine volatile oil has a long history and possesses extensive pharmacological activity. However, volatile oils have characteristics such as strong volatility, poor water solubility, low bioavailability, and poor targeting, which limit their application. The use of volatile oil nano drug delivery systems can effectively improve the drawbacks of volatile oils, enhance their bioavailability and chemical stability, and reduce their volatility and toxicity. This article first introduces the limitations of the components of traditional Chinese medicine volatile oils, discusses the main classifications and latest developments of volatile oil nano formulations, and briefly describes the preparation methods of traditional Chinese medicine volatile oil nano formulations. Secondly, the limitations of nano formulation technology are discussed, along with future challenges and prospects. A deeper understanding of the role of nanotechnology in traditional Chinese medicine volatile oils will contribute to the modernization of volatile oils and broaden their application value.

Effects of arginine on coenzyme-Q10 micelle uptake for mitochondria-targeted nanotherapy in phenylketonuria

Phenylketonuria (PKU) is a rare inherited metabolic disease characterized by phenylalanine hydroxylase enzyme deficiency. In PKU patients, coenzyme Q10 (CoQ10) levels were found low. Therefore, we focused on the modification of CoQ10 to load the micelles and increase entry of micelles into the cell and mitochondria, and it is taking a part in ATP turnover. Micelles had produced by comparing two different production methods (thin-film layer and direct-dissolution), and characterization studies were performed (zeta potential, size, and encapsulation efficiency). Then, L-arginine (LARG) and poly-arginine (PARG) were incorporated with the micelles for subsequential release and PKU cell studies. The effects of these components on intracellular uptake and their use in the cellular cycle were analyzed by ELISA, Western blot, membrane potential measurement, and flow cytometry methods. In addition, both effects of LARG and PARG micelles on pharmacokinetics at the cellular level and their cell binding rate were determined. The thin-film method was found superior in micelle preparation. PARG/LARG-modified micelles showed sustained release. In the cellular and mitochondrial uptake of CoQ10, CoQ10-micelle + PARG > CoQ10-micelle + LARG > CoQ10-micelle > CoQ10 was found. This increased localization caused lowering of oxygen consumption rates, but maintaining mitochondrial membrane potential. The study results had showed that besides micelle formulation, PARG and LARG are effective in cellular and mitochondrial targeting.

Preparation, Characterization, and Anticancer Activity of PEGylated Nano Liposomal Loaded with Rutin against Human Carcinoma Cells (HT-29)

The abstract discusses the development of rutin-loaded nanoliposomes and their anti-colorectal cancer activity against human carcinoma cells (HT-29). The study characterizes the nanoliposomes using the thin-film hydration method and analyzes their size, charge, and polydispersity index. The encapsulation efficiency and drug loading ability of rutin at different concentrations were investigated. The nanoliposomes were found to be stable for up to one month at 4 °C and showed sustained drug release for up to 24 h. The anti-cancer activity of the rutin-loaded nanoliposomes was found to be concentration-dependent and significantly improved compared to free rutin. PEGylated nanoliposomes with rutin (1.8 mg/ml) showed the highest encapsulation efficiency and drug loading ability, along with improved selectivity against cancer cells. Overall, the study provides important insights into the potential use of rutin-loaded nanoliposomes for the treatment of colorectal cancer.

Current Applications of Liposomes for the Delivery of Vitamins: A Systematic Review

Liposomes have been used for several decades for the encapsulation of drugs and bioactives in cosmetics and cosmeceuticals. On the other hand, the use of these phospholipid vesicles in food applications is more recent and is increasing significantly in the last ten years. Although in different stages of technological maturity-in the case of cosmetics, many products are on the market-processes to obtain liposomes suitable for the encapsulation and delivery of bioactives are highly expensive, especially those aiming at scaling up. Among the bioactives proposed for cosmetics and food applications, vitamins are the most frequently used. Despite the differences between the administration routes (oral for food and mainly dermal for cosmetics), some challenges are very similar (e.g., stability, bioactive load, average size, increase in drug bioaccessibility and bioavailability). In the present work, a systematic review of the technological advancements in the nanoencapsulation of vitamins using liposomes and related processes was performed; challenges and future perspectives were also discussed in order to underline the advantages of these drug-loaded biocompatible nanocarriers for cosmetics and food applications.

Development and Evaluation of Novel Encapsulated Isoeugenol-Liposomal Gel Carrier System for Methicillin-Resistant Staphylococcus aureus

In recent years, methicillin-resistant Staphylococcus aureus (MRSA) bacteria have seriously threatened the health and safety of the world’s population. This challenge demands the development of alternative therapies based on plant origin. This molecular docking study ascertained the orientation and intermolecular interactions of isoeugenol within penicillin-binding protein 2a. In this present work, isoeugenol as an anti-MRSA therapy was selected by encapsulating it into a liposomal carrier system. After encapsulation into the liposomal carrier, it was evaluated for encapsulation efficiency (%), particle size, zeta potential, and morphology. The percentage entrapment efficiency (% EE) was observed to be 57.8 ± 2.89% with a particle size of 143.31 ± 7.165 nm, a zeta potential of (−)25 mV, and morphology was found to be spherical and smooth. After this evaluation, it was incorporated into a 0.5% Carbopol gel for a smooth and uniform distribution on the skin. Notably, the isoeugenol-liposomal gel was smooth on the surface with a pH of 6.4, suitable viscosity, and spreadability. Interestingly, the developed isoeugenol-liposomal gel was safe for human use, with more than 80% cell viability. The in vitro drug release study shows promising results with 75.95 ± 3.79% of drug release after 24 h. The minimum inhibitory concentration (MIC) was 8.236 µg/mL. Based on this, it can be concluded that encapsulating isoeugenol into the liposomal gel is a potential carrier for MRSA treatment.

Effect of Liposomal Encapsulation and Ultrasonication on Debittering of Protein Hydrolysate and Plastein from Salmon Frame

The impacts of liposomal encapsulation on the bitterness of salmon frame protein hydrolysate (SFPH) and salmon frame protein plastein (SFPP) with the aid of ultrasound (20% amplitude, 750 W) for different time intervals (30, 60 and 120 s) were investigated. Liposomes loaded with 1% protein hydrolysate (L-PH1) and 1% plastein (L-PT1) showed the highest encapsulation efficiency and the least bitterness (p < 0.05). Ultrasonication for longer times reduced encapsulation efficiency (EE) and increased bitterness of both L-PH1 and L-PT1 along with a reduction in particle size. When comparing between L-PH1 and L-PT1, the latter showed less bitterness due to the lower bitterness in nature and higher entrapment of plastein in the liposomes. In vitro release studies also showed the delayed release of peptides from L-PT1 in comparison to the control plastein hydrolysate. Therefore, encapsulation of liposomes with 1% plastein could be an efficient delivery system for improving the sensory characteristics by lowering the bitterness of protein hydrolysates.

Liposomal Formulations Loaded with a Eugenol Derivative for Application as Insecticides: Encapsulation Studies and In Silico Identification of Protein Targets

A recently synthesized new eugenol derivative, ethyl 4-(2-methoxy-4-(oxiran-2-ylmethyl)phenoxy)butanoate, with a high insecticidal activity against Sf9 (Spodoptera frugiperda) insect cells, was encapsulated in the liposomal formulations of egg-phosphatidylcholine/cholesterol (Egg-PC:Ch) 70:30 and 100% dioleoylphosphatidylglycerol (DOPG), aiming at the future application as insecticides. Compound-loaded DOPG liposomes have sizes of 274 ± 12 nm, while Egg-PC:Ch liposomes exhibit smaller hydrodynamic diameters (69.5 ± 7 nm), high encapsulation efficiency (88.8 ± 2.7%), higher stability, and a more efficient compound release, thus, they were chosen for assays in Sf9 insect cells. The compound elicited a loss of cell viability up to 80% after 72 h of incubation. Relevantly, nanoencapsulation maintained the toxicity of the compound toward insect cells while lowering the toxicity toward human cells, thus showing the selectivity of the system. Structure-based inverted virtual screening was used to predict the most likely targets and molecular dynamics simulations and free energy calculations were used to demonstrate that this molecule can form a stable complex with insect odorant binding proteins and/or acetylcholinesterase. The results are promising for the future application of compound-loaded nanoliposome formulations as crop insecticides.

Supercritical Fluid Technologies for the Incorporation of Synthetic and Natural Active Compounds into Materials for Drug Formulation and Delivery

Various active compounds isolated from natural sources exhibit remarkable benefits, making them attractive for pharmaceutical and biomedical applications, such as antioxidant, antimicrobial, and anti-inflammatory activities, which contribute to the treatment of cardiovascular diseases, neurodegenerative disorders, various types of cancer, diabetes, and obesity. However, their major drawbacks are their reactivity, instability, relatively poor water solubility, and consequently low bioavailability. Synthetic drugs often face similar challenges associated with inadequate solubility or burst release in gastrointestinal media, despite being otherwise a safe and effective option for the treatment of numerous diseases. Therefore, drug-eluting pharmaceutical formulations have been of great importance over the years in efforts to improve the bioavailability of active compounds by increasing their solubility and achieving their controlled release in body media. This review highlights the success of the fabrication of micro- and nanoformulations using environmentally friendly supercritical fluid technologies for the processing and incorporation of active compounds. Several novel approaches, namely micronization to produce micro- and nano-sized particles, supercritical drying to produce aerogels, supercritical foaming, and supercritical solvent impregnation, are described in detail, along with the currently available drug delivery data for these formulations.

A Comprehensive Review on Novel Liposomal Methodologies, Commercial Formulations, Clinical Trials and Patents

Liposomes are well-recognized and essential nano-sized drug delivery systems. Liposomes are phospholipid vesicles comprised of cell membrane components and have been employed as artificial cell models to mimic structure and functions of cells and are of immense use in various biological analyses. Liposomes acquire great advantages and provide wide range of applications as useful drug carriers in pre-clinical and clinical trials. This review summarizes exclusively on scalable techniques for liposome preparation and focuses on the strengths and limitations with respect to industrial applicability. Also, this review discusses the updated recent advancements in biomedical applications with a mention of key highlights of commercially available formulations, clinical trials and patents in recent past. Furthermore, this review also provides brief information of the classification, composition and characterization of liposomes.

Biocontrol Potential of Essential Oils in Organic Horticulture Systems: From Farm to Fork

In recent decades, increasing attention has been paid to food safety and organic horticulture. Thus, people are looking for natural products to manage plant diseases, pests, and weeds. Essential oils (EOs) or EO-based products are potentially promising candidates for biocontrol agents due to their safe, bioactive, biodegradable, ecologically, and economically viable properties. Born of necessity or commercial interest to satisfy market demand for natural products, this emerging technology is highly anticipated, but its application has been limited without the benefit of a thorough analysis of the scientific evidence on efficacy, scope, and mechanism of action. This review covers the uses of EOs as broad-spectrum biocontrol agents in both preharvest and postharvest systems. The known functions of EOs in suppressing fungi, bacteria, viruses, pests, and weeds are briefly summarized. Related results and possible modes of action from recent research are listed. The weaknesses of applying EOs are also discussed, such as high volatility and low stability, low water solubility, strong influence on organoleptic properties, and phytotoxic effects. Therefore, EO formulations and methods of incorporation to enhance the strengths and compensate for the shortages are outlined. This review also concludes with research directions needed to better understand and fully evaluate EOs and provides an outlook on the prospects for future applications of EOs in organic horticulture production.

Photodynamic therapy fortified with topical oleyl alcohol-based transethosomal 8-methoxypsoralen for ameliorating vitiligo: Optimization and clinical study

Vitiligo is a common autoimmune skin disorder that is characterized by patchy depigmentation of the skin due to melanocytes and melanin loss. Herein, photodynamic therapy mediated 8-methoxypsoralen (8-MOP), has been used fortified with topical oleyl alcohol-based transethosomes; to overcome the poor solubility and adverse effects associated with 8-MOP oral delivery. A 2³ factorial design was used to study the formulation variables. In vitro and ex-vivo characterization besides a clinical study were conducted to assess therapeutic efficacy of the formulation. Results revealed that transethosomes were superior to transfersomes regarding drug protection from degradation. The optimized transethosomal formulation, composed of 50 mg oleyl alcohol, 10 mg Tween 80® and 20% v/v ethanol, exhibited high entrapment efficiency (83.87 ± 4.1%) and drug loading (105.0 ± 0.2%). Moreover, it showed small vesicular size (265.0 ± 2.9 nm) and PDI (0.19). The formulation depicted core and shell structure, high deformability index (12.45 ± 0.7 mL/s) and high ex-vivo skin permeation. The topical application of the developed 8-MOP transethosomal gel enhanced the effect of NB UVB radiation in the treatment of vitiligo patients and exhibited no side effects. Hence, it can be used as a future strategy for delivering 8-MOP without the need of systemic application.

Utilization of PEGylated cerosomes for effective topical delivery of fenticonazole nitrate: in-vitro characterization, statistical optimization, and in-vivo assessment

In this investigation, we focused on ceramide IIIB, a skin component whose depletion tends to augment multiple skin disorders and fungal infections. Ceramide IIIB was included into PEGylated surfactant-based vesicular phospholipid system to formulate 'PEGylated cerosomes' (PCs) loaded with fenticonazole nitrate (FTN). FTN is a potent antifungal agent adopted in the treatment of mixed mycotic and bacterial infections. The ceramide content of the vesicles may provide protective and regenerative skin activity whereas Brij®; the PEGylated surfactant, can enhance drug deposition and skin hydration. Both components are expected to augment the topical effect of FTN. PCs were prepared by thin-film hydration technique. A 23 full-factorial design was applied to study the effect of ceramide amount (X1), Brij type (X2) and Brij amount (X3) on the physicochemical properties of the formulated PCs namely; entrapment efficiency (EE%;Y1), particle size (PS;Y2), polydispersity index (PDI;Y3) and zeta potential (ZP;Y4). The optimal formula was selected for further in-vivo dermatokinetic and histopathological study. The optimal FTN-loaded PC (PC6) showed nanosized cerosomes (551.60 nm) with high EE% (83.00%w/w), and an acceptable ZP value of 20.90 mV. Transmission electron micrographs of the optimal formula illustrated intertwined tubulation form deviated from the conventional spherical vesicles. Finally, the dermatokinetic study of PC6 showed higher drug concentration and localization of FTN in skin layers when compared with FTN suspension and the histopathological study confirmed its safety for topical application. The overall findings of our study verified the effectiveness of utilizing PEGylated cerosomes to augment the activity of FTN as a topical antifungal agent.

Insight into dual fluorescence effects induced by molecular aggregation occurring in membrane model systems containing 1,3,4-thiadiazole derivatives

This work reports on biophysical insights into the excited state intramolecular proton transfer (ESIPT) processes taking place in three 1,3,4-thiadiazole derivatives that served as model compounds, on which electronic absorption, fluorescence, Fourier-transform infrared spectroscopy (FTIR), surface plasmon resonance (SPR) and electrochemical impedance spectroscopy (EIS) studies were performed. The fluorescence spectra recorded in various solvents revealed an interesting dual fluorescence effect. In molecules in their monomeric form, the effect is associated with the ESIPT phenomenon, and may be further enhanced by aggregation-related effects, such as aggregation-induced emissions. Other spectroscopic studies on the selected molecules in a liposomal medium as a model revealed that, in a biomimetic environment, they can exist in both monomeric and aggregated forms. In both cases, however, the effects observed are closely related to the lipid's main phase transition temperature and the structure of the molecule. Introduction of specific substituents to the phenyl moiety either allows or prevents proton transfer from occurring in the excited state. The hydrophobicity changes in a lipid environment may result in an emergence of specific molecular forms and therefore either facilitate or hinder ESIPT processes. SPR and EIS confirmed the significant hydrophobicity changes in the model lipid systems, while FTIR measurements revealed a notable influence of 1,3,4-thiadiazoles on the fluidity of liposomal membranes. The results obtained clearly show that the thiadiazole derivatives are very good model molecules for studying hydrophobic-hydrophilic environments, and particularly with polymers or liposomes used as drug delivery systems.

Transdermal Delivery of Telmisartan: Formulation, in vitro, ex vivo, Iontophoretic Permeation Enhancement and Comparative Pharmacokinetic Study in Rats

Purpose

The purpose of this study was to prepare telmisartan transethosomes, incorporate them into a gel, evaluate them for in vitro drug release and in vivo permeation using iontophoresis to enhance their transdermal delivery.

Materials and Methods

TE formulae were prepared using various surfactants (SAAs), different ethanol concentrations, and different phospholipid-to-SAA ratios with different cholesterol ratios, characterized according to their entrapment efficiency percentage (EE%), zeta potential (ZP), particle size (PS), and polydispersity index (PDI). The optimum three formulae were incorporated into a gel, evaluated physically, in vitro dissolution, and ex vivo drug permeation using rat skin and Iontophoresis was performed on the best formula.

Results

The optimum three formulae (F29, F31, F32) had an EE% of 97±0.26%, 89±0.25% and 88±0.17%, PS of 244±5.88 nm, 337±4.6 nm and 382.2±3.06 nm, PDI of 0.57±1.9, 0.5±1.4 and 0.63±2.2 and ZP of −31.6±1.59 mV, −28.3±3.79 mV and −31±5.65, respectively. Selecting F29 for in vivo study by iontophoretic enhancement, Cmax was increased by 1.85 folds compared to the commercial oral tablet and by 1.5 folds compared to transdermal gel. Tmax decreased by half using iontophoresis compared to commercial tablets and transdermal gel.

Conclusion

The transethosomal formulation of telmisartan enhanced its transdermal absorption and increased its bioavailability as well. Iontophoresis was used to increase maximum plasma concentration and reduce Tmax by half.

Nematicidal Activity of Essential Oil from Lavandin (Lavandula × intermedia Emeric ex Loisel.) as Related to Chemical Profile

Essential oils (EOs) from lavandin are known for a large spectrum of biological properties but poorly and contrastingly documented for their activity against phytoparasitic nematodes. This study investigated the toxicity of EOs from three different lavandin cultivars, Abrialis, Rinaldi Cerioni, and Sumiens, either to juveniles (J2) and eggs of the root-knot nematode Meloidogyne incognita and to infective stages of the lesion nematode Pratylenchus vulnus. The suppressive activity of treatments with EOs from the three lavandin cultivars in soil infested by M. incognita was also investigated in a greenhouse experiment on potted tomato. The compositional profiles of tested EOs were also analyzed by GC-FID and GC-MS. Linalool was the major component of all the three EOs, as accounting for about 66%, 48%, and 40% of total EO from cv Rinaldi Cerioni, Sumiens, and Abrialis, respectively. Linalool acetate was the second most abundant compound in the EOs from cv Abrialis (18.3%) and Sumiens (14.9%), while significant amounts of camphor (11.5%) and 1,8-cineole (12.1%) were detected in cv Rinaldi Cerioni and Sumiens EOs, respectively. The mortality of M. incognita J2 peaked 82.0%, 95.8%, and 89.8% after a 24 h treatment with 100 mg·mL⁻¹ solutions of cv Abrialis, Rinaldi Cerioni, and Sumiens EOs, respectively. Infective specimens of P. vulnus were largely more sensitive than M. incognita J2, as there were peak mortality rates of 65.5%, 67.7%, and 75.7% after 4 h of exposure to Abrialis, Rinaldi Cerioni, and Sumiens EO, respectively. All three lavandin EOs significantly affected also M. incognita egg hatchability, which reduced to 43.6% after a 48 h egg mass exposure to a 100 µg·mL⁻¹ solution of cv Rinaldi Cerioni EO. Soil treatments with the three lavandin EOs strongly reduced, according to a dose–effect relationship, density of M. incognita eggs, and J2 both on tomato roots and in soil, as well as significantly reduced gall formation on tomato roots. Finally, almost all soil treatments with the lavandin EOs also resulted in a positive impact on tomato plant growth.

Long-Term Antibacterial Film Nanocomposite Incorporated with Patchouli Essential Oil Prepared by Supercritical CO2 Cyclic Impregnation for Wound Dressing

Biocompatible skin wound dressing materials with long-term therapeutic windows and anti-infection properties have attracted great attention all over the world. The cooperation between essential oil and non-toxic or bio-based polymers was a promising strategy. However, the inherent volatility and chemical instability of most ingredients in essential oils make the sustained pharmacological activity of essential oil-based biomaterials a challenge. In this study, a kind of film nanocomposite loaded with patchouli essential oil (PEO-FNC) was fabricated. PEO-loaded mesoporous silica nanoparticles (PEO-MSNs) with drug load higher than 40 wt% were firstly prepared using supercritical CO2 cyclic impregnation (SCCI), and then combined with the film matrix consisting of polyvinyl alcohol and chitosan. The morphology of PEO-MSNs and PEO-FNC was observed by transmission and scanning electron microscope. The mechanical properties, including hygroscopicity, tensile strength and elongation at break (%), were tested. The release behavior of PEO from the film nanocomposite showed that PEO could keep releasing for more than five days. PEO-FNC exhibited good long-term (>48 h) antibacterial effect on Staphylococcus aureus and non-toxicity on mouse fibroblast (L929 cells), making it a promising wound dressing material.

Ultra-deformable liposomes containing terpenes (terpesomes) loaded fenticonazole nitrate for treatment of vaginal candidiasis: Box-Behnken design optimization, comparative ex vivo and in vivo studies

Fenticonazole nitrate (FTN) is a potent antifungal drug adopted in the treatment of vaginal candidiasis. It has inadequate aqueous solubility hence, novel ultra-deformable liposomes 'Terpesomes' (TPs) were developed that might prevail over FTN poor solubility besides TPs might abstain the obstacles of mucus invasion. TPs were assembled by thin-film hydration then optimized by Box Behnken design utilizing terpenes ratio (X₁), sodium deoxycholate amount (X₂), and ethanol concentration (X₃) as independent variable, whereas their impact was inspected for entrapment efficiency (Y₁), particle size (Y₂), and polydispersity index (Y₃). Design Expert^® was bestowed to select the optimal TP for more studies. The optimal TP had entrapment efficiency of 62.18 ± 1.39%, particle size of 310.00 ± 8.16 nm, polydispersity index of 0.20 ± 0.10, and zeta potential of -10.19 ± 0.2.00 mV. Elasticity results were greater in the optimal TP related to classical bilosomes. Further, ex vivo permeation illustrated tremendous permeability from the optimal TP correlated to classical bilosomes, and FTN suspension. Besides, in vivo assessment displayed significant inhibition effect in rats from FTN-TPs gel compared to FTN gel. The antifungal potency with undermost histopathological variation was detected in rats treated with FTN-TPs gel. Overall, the acquired findings verified the potency of utilizing FTN-TPs gel for treatment of vaginal candidiasis.

A novel delivery of curcumin by the efficient nanoliposomal approach against Leishmania major

Several side effects and drug resistance accompany the current therapies for Leishmaniasis. Nanoliposomal curcumin is applied as a new therapy approach instead of current therapy. In this study, nanoliposomal curcumin was prepared using thin-film hydration method and characterized based on encapsulation efficiency, size, and zeta potential. Curcumin was successfully loaded into nanoliposomes with an encapsulation efficiency of 92%. The surface charge of the nanoparticle was neutral, and the size of nanoparticle was 176.5 nm. Nanoliposomal curcumin is in spherical shape without any agglomeration. Cell viability assay was performed on HFF cell line to show biocompatibility of liposome nanoparticles. Anti-Leishmanial effect of different concentrations of liposomal curcumin (0.05-30 μg mL^-1) and amphotericin B (25 μg mL^-1) were studied on Leishmania major [MRHO/IR/75/ER] at various hours (24, 48, and 72) using hemocytometer technique. Nanoliposomal curcumin inhibitory concentration (IC50) at hours 24, 48, and 72 were 6.41, 3.8, and 2.33 µg mL^-1, respectively. As prepared nanoliposomal curcumin showed a significant antileishmanial effect and induced a better and more tangible effect on the survival of L. major promastigotes and could be suitable candidates for further investigations.

Method Development and Characterization of Liposomal Formulation of Isotretinoin

This study aims to develop a liposomal drug delivery system of isotretinoin, an acne drug-using spray drying, as a cost-effective and time-effective technique. The liposomal formulation was prepared by using spray drying; three different strategies were adopted: suspension spray drying (SSD), thin-film hydration and spray drying (TFHSD), and emulsion spray drying (ESD). Isotretinoin was 99% bound with lipid, so lipids hydrogenated soy phosphatidylcholine (HSPC), distearoyl phosphatidylglycerol (DSPG), and cholesterol were selected for the formulation development. The HSPC, DSPG, cholesterol, and isotretinoin were taken in the ratio 4 : 1 : 0.16 : 3.1 mmol. In vitro drug release studies, microscopy, drug content, and related substance characterizations were done to formulate each strategy of spray drying prepared dry liposomes of isotretinoin. Results were compared with the USP monograph of isotretinoin. It was revealed that isotretinoin's liposomal formulation using ESD was having drug release according to the USP limits. Drug content was also according to the USP requirement; no free drug crystals were found in microscopy, multivesicular vesicles were found in shape, a particle size of up 60 µ was found. The ESD technique was a successful, time-effective, and cost-effective technique for preparing a liposomal drug delivery system for isotretinoin.

Liposome Permeability to Essential Oil Components: A Focus on Cholesterol Content

Encapsulation in liposomes has been an efficient strategy to improve the stability of sensitive bioactive compounds such as essential oils (EOs). However, the stability of liposomal formulations remains a key parameter controlling the delivery of encapsulated ingredients. Cholesterol (Chol) modulates the membrane properties conferring stability to the lipid bilayer. Thus, the Chol content in the liposome formulations encapsulating EO components should be carefully chosen. In this work, various liposome formulations differing by Chol content (DPPC:Chol 100:10; 100:25; 100:50; 100:75; 100:100) were exposed to a series of 22 EO components at DPPC/EO 100/25. The formulations were characterized for their final composition and their permeability to the hydrophilic fluorophore, sulforhodamine B (SRB), was monitored. Results showed that the Chol content experimentally determined for the various formulations (above 10% Chol) was below the theoretical weighed Chol. Among the tested components, 13 molecules displayed a significant permeabilizing effect on 10% Chol membranes. Most of these possess a hydroxyl group. The EO induced permeability was dependent on the Chol content which affects the membrane phase: their effect was reduced upon increasing Chol content keeping five EOs components effective at 40% Chol. The EO's effect was also linked to the hydrophobicity of the molecule. Hence, the DPPC:Chol ratio of the formulation is chosen considering the structure of the compound, its hydrophobicity and its effect on the permeability at different Chol content: a formulation comprising 40% Chol is suggested for highly hydrophobic molecules whereas a formulation with higher Chol content could be selected for less hydrophobic compounds.

Mosquito-repellent controlled-release formulations for fighting infectious diseases

Malaria is a principal cause of illness and death in countries where the disease is endemic. Personal protection against mosquitoes using repellents could be a useful method that can reduce and/or prevent transmission of mosquito-borne diseases. The available repellent products, such as creams, roll-ons, and sprays for personal protection against mosquitoes, lack adequate long-term efficacy. In most cases, they need to be re-applied or replaced frequently. The encapsulation and release of the repellents from several matrices has risen as an alternative process for the development of invention of repellent based systems. The present work reviews various studies about the development and use of repellent controlled-release formulations such as polymer microcapsules, polymer microporous formulations, polymer micelles, nanoemulsions, solid-lipid nanoparticles, liposomes and cyclodextrins as new tools for mosquito-borne malaria control in the outdoor environment. Furthermore, investigation on the mathematical modelling used for the release rate of repellents is discussed in depth by exploring the Higuchi, Korsmeyer-Peppas, Weibull models, as well as the recently developed Mapossa model. Therefore, the studies searched suggest that the final repellents based-product should not only be effective against mosquito vectors of malaria parasites, but also reduce the biting frequency of other mosquitoes transmitting diseases, such as dengue fever, chikungunya, yellow fever and Zika virus. In this way, they will contribute to the improvement in overall public health and social well-being.

Chimeric liposomes incorporating functional copolymers: preparation and pH/thermo-responsive behaviour in aqueous solutions

The purpose of this study is to prepare stimuli-responsive chimeric liposomes (i.e. hybrid polymer-lipid liposomes) containing functional copolymers and conduct aqueous solution studies in order to determine their properties and potential as drug-delivery nanocarriers. Two random copolymers, composed of the hydrophilic, pH and thermo-responsive 2-(dimethyl amino) ethyl methacrylate (DMAEMA) monomer and the hydrophobic stearyl methacrylate (SMA) monomer, were synthesized via free-radical polymerization and molecularly characterized using SEC, FTIR, and 1H-NMR. The synthesis was followed by aqueous solution studies, utilising dynamic light scattering (DLS) in order to determine their stimuli responsive self-assembly properties. The preparation of chimeric liposomes was mediated by thin film deposition and hydration, followed by aqueous solution studies via DLS, ζ-potential and fluorescence spectroscopy. The drug-loading studies include curcumin loading via a thin film deposition and hydration technique, while aqueous solution properties of the drug-loaded chimeric liposomes were determined utilizing DLS, and UV-Vis spectroscopy.

Development and Optimization of Terpene-Enriched Vesicles (Terpesomes) for Effective Ocular Delivery of Fenticonazole Nitrate: In vitro Characterization and in vivo Assessment

Objective

The aim of the current study was to load fenticonazole nitrate, a slightly water-soluble antifungal agent, into terpene-enriched phospholipid vesicles (terpesomes) as a potential delivery system for the management of ocular fungal infection.

Methods

Thin film hydration method was used to prepare terpesomes according to a 3² full factorial design to inspect the effect of several variables on vesicles’ features. The investigated factors were terpenes type (X₁) and terpenes amount (X₂) while the dependent responses were encapsulation efficiency percent (Y₁), particle size (Y₂) and polydispersity index (Y₃). Design Expert^® program was used to chose the best achieved formula. The selected terpesomes were further optimized via incorporation of a positive charge inducer (stearylamine) to enhance adhesion to the negatively charged mucus covering the eye surface. The in vivo performance of the optimized fenticonazole nitrate-loaded terpesomes relative to drug suspension was evaluated by measuring the antifungal activity (against Candida albicans) retained in the tear's fluid at different time intervals after ocular application in albino rabbits.

Results

The optimized terpesomes showed spherical vesicles with entrapment efficiency of 79.02±2.35%, particle size of 287.25±9.55 nm, polydispersity index of 0.46±0.01 and zeta potential of 36.15±1.06 mV. The in vivo study demonstrated significantly higher ocular retention of the optimized fenticonazole nitrate-loaded terpesomes relative to the drug suspension. Moreover, the histopathological studies proved the safety and biocompatibility of the prepared terpesomes.

Conclusion

The obtained results verified the potential of the terpesomes for safe and effective ocular delivery of fenticonazole nitrate.

Insight Into Nanoliposomes as Smart Nanocarriers for Greening the Twenty-First Century Biomedical Settings

The necessity to develop more efficient, biocompatible, patient compliance, and safer treatments in biomedical settings is receiving special attention using nanotechnology as a potential platform to design new drug delivery systems (DDS). Despite the broad range of nanocarrier systems in drug delivery, lack of biocompatibility, poor penetration, low entrapment efficiency, and toxicity are significant challenges that remain to address. Such practices are even more demanding when bioactive agents are intended to be loaded on a nanocarrier system, especially for topical treatment purposes. For the aforesaid reasons, the search for more efficient nano-vesicular systems, such as nanoliposomes, with a high biocompatibility index and controlled releases has increased considerably in the past few decades. Owing to the stratum corneum layer barrier of the skin, the in-practice conventional/conformist drug delivery methods are inefficient, and the effect of the administered therapeutic cues is limited. The current advancement at the nanoscale has transformed the drug delivery sector. Nanoliposomes, as robust nanocarriers, are becoming popular for biomedical applications because of safety, patient compliance, and quick action. Herein, we reviewed state-of-the-art nanoliposomes as a smart and sophisticated drug delivery approach. Following a brief introduction, the drug delivery mechanism of nanoliposomes is discussed with suitable examples for the treatment of numerous diseases with a brief emphasis on fungal infections. The latter half of the work is focused on the applied perspective and clinical translation of nanoliposomes. Furthermore, a detailed overview of clinical applications and future perspectives has been included in this review.

Cytotoxic Plant Extracts towards Insect Cells: Bioactivity and Nanoencapsulation Studies for Application as Biopesticides

The potential of plant extracts as bioinsecticides has been described as a promising field of agricultural development. In this work, the extracts of Punica granatum (pomegranate), Phytolacca americana (American pokeweed), Glandora prostrata (shrubby gromwell), Ulex europaeus (gorce), Tagetes patula (French marigold), Camellia japonica red (camellia), Ruta graveolens (rue or herb-of-grace) were obtained, purified, and their activity against Spodoptera frugiperda (Sf9) insect cells was investigated. From the pool of over twenty extracts obtained, comprising different polarities and vegetable materials, less polar samples were shown to be more toxic towards the insect cell line Sf9. Among these, a dichloromethane extract of R. graveolens was capable of causing a loss of viability of over 50%, exceeding the effect of the commercial insecticide chlorpyrifos. This extract elicited chromatin condensation and the fragmentation in treated cells. Nanoencapsulation assays of the cytotoxic plant extracts in soybean liposomes and chitosan nanostructures were carried out. The nanosystems exhibited sizes lower or around 200 nm, low polydispersity, and generally high encapsulation efficiencies. Release assays showed that chitosan nanoemulsions provide a fast and total extract release, while liposome-based systems are suitable for a more delayed release. These results represent a proof-of-concept for the future development of bioinsecticide nanoformulations based on the cytotoxic plant extracts.

Novel Technologies Based on Supercritical Fluids for the Encapsulation of Food Grade Bioactive Compounds

In recent years, the demand for nutritive, functional and healthy foods has increased. This trend has induced the food industry to investigate novel technologies able to produce ingredients with enhanced functional and physicochemical properties. Among these technologies, one of the most promising is the encapsulation based on supercritical fluids. Thanks to the inherent absence of organic solvent, the low temperature of the process to reach a supercritical state and the capacity to dissolve lipid soluble bioactives, the encapsulation with supercritical carbon dioxide represents a green technology to produce several functional ingredients, with enhanced stability, high load and tailored protection from environmental factors. Furthermore, from the fine-tuning of the process parameters like temperature, pressure and flow rate, the resulting functional ingredient can be easily designed to tailor the controlled release of the bioactive, or to reach specific levels of taste, odor and color. Accordingly, the aim of the present review is to summarize the state of the art of the techniques based on supercritical carbon dioxide for the encapsulation of bioactive compounds of food interest. Pros and cons of such techniques will be highlighted, giving emphasis to their innovative aspects that could be of interest to the food industry.

Cu Nanoparticle-Loaded Nanovesicles with Antibiofilm Properties. Part I: Synthesis of New Hybrid Nanostructures

Copper nanoparticles (CuNPs) stabilized by quaternary ammonium salts are well known as antimicrobial agents. The aim of this work was to study the feasibility of the inclusion of CuNPs in nanovesicular systems. Liposomes are nanovesicles (NVs) made with phospholipids and are traditionally used as delivery vehicles because phospholipids favor cellular uptake. Their capacity for hydrophilic/hydrophobic balance and carrier capacity could be advantageous to prepare novel hybrid nanostructures based on metal NPs (Me-NPs). In this work, NVs were loaded with CuNPs, which have been reported to have a biofilm inhibition effect. These hybrid materials could improve the effect of conventional antibacterial agents. CuNPs were electro-synthesized by the sacrificial anode electrolysis technique in organic media and characterized in terms of morphology through transmission electron microscopy (TEM). The NVs were prepared by the thin film hydration method in aqueous media, using phosphatidylcholine (PC) and cholesterol as a membrane stabilizer. The nanohybrid systems were purified to remove non-encapsulated NPs. The size distribution, morphology and stability of the NV systems were studied. Different quaternary ammonium salts in vesicular systems made of PC were tested as stabilizing surfactants for the synthesis and inclusion of CuNPs. The entrapment of charged metal NPs was demonstrated. NPs attached preferably to the membrane, probably due to the attraction of their hydrophobic shell to the phospholipid bilayers. The high affinity between benzyl-dimethyl-hexadecyl-ammonium chloride (BDHAC) and PC allowed us to obtain stable hybrid NVs c.a. 700 nm in diameter. The stability of liposomes increased with NP loading, suggesting a charge-stabilization effect in a novel antibiofilm nanohybrid material.

Natural Macromolecules as Carriers for Essential Oils: From Extraction to Biomedical Application

Essential oils (EOs) and their main constituents, the terpenes, are widely studied, mostly relating to their antioxidant ability and bioactivity, such as antimicrobial, anticancer, anti-inflammatory, and range of other actions in the living systems. However, there is limited information on their bioavailability, especially upon clinical studies. Having in mind both strong biological effects and health benefits of EOs and their specific physicochemical properties (volatility, lipophilic character, low water solubility or insolubility, viscosity, expressed odor, concentration-dependent toxicity, etc.), there is a need for their encapsulation for target delivery. Encapsulation of EOs and their constituents is the prerequisite for enhancing their oxidative stability, thermostability, photostability, shelf life, and biological activity. We considered various carrier types such a (1) monophase and polyphase polysaccharide hydrogel carriers, (2) polysaccharide-protein carriers, and (3) lipid carriers in the context of physicochemical and engineering factors. Physicochemical factors are encapsulation efficiency, chemical stability under gastric conditions, mechanical stability, and thermal stability of carrier matrices. Choice of carrier material also determines the encapsulation technique. Consequently, the engineering factors are related to the advantage and disadvantage of various encapsulation techniques frequently used in the literature. In addition, it was intended to address the interactions between (1) main carrier components, such as polysaccharides, proteins, and lipids themselves (in order to form chemically and mechanically stable structure); (2) main carrier components with pepsin under gastric conditions (in order to form resistant material under gastric conditions); and (3) main carrier components with EOs (in order to enhance encapsulation efficiency), as a necessary precondition for whole process optimization. Finally, different sources for obtaining natural carrier macromolecules are surveyed, especially the agro-waste materials and agricultural and food by-products. This review article highlights the bioavailability aspects of encapsulated EOs and physicochemical and engineering factors concerning natural macromolecule carriers for their target delivery and application.

A pre-formulation strategy for the liposome encapsulation of new thioctic acid conjugates for enhanced chemical stability and use as an efficient drug carrier for MPO-mediated atherosclerotic CVD treatment

Lipoyl-apocynin and lipoyl-sesamol are bio-active conjugates of thioctic acid, synthesized using a benign chemical approachviathe combination of thioctic acid and the powerful bio-phytonutrients, apocynin and sesamol, respectively.

In vivo antimalarial activity and pharmacokinetics of artelinic acid-choline derivative liposomes in rodents

It is urgent to develop new antimalarial drugs with good therapeutic effects to address the emergence of drug resistance. Here, the artelinic acid-choline derivative (AD) was synthesized by dehydration reaction and esterification reaction, aimed to avoid the emergence of drug resistance by synergistic effect of artemisinins and choline derivative, which could compete with choline for rate-limiting enzymes in the phosphatidylcholine (PC) biosynthetic pathway. AD was formulated into liposomes (ADLs) by the thin-film hydration method. Efficacy of ADLs was evaluated by Peters 4-day suppression test. The suppression percentage against Plasmodium yoelii BY265 (PyBY265) in ADLs group was higher than those of positive control groups (dihydroartemisinin liposomes, P < 0.05) and other control groups (P ⩽ 0.05) at the doses of 4.4, 8.8, 17.6 µmol (kg·d)−1, respectively. The negative conversion fraction, recrudescence fraction and survival fraction of ADLs group were superior to other control groups. Pharmacokinetics in rats after intravenous injection suggested that ADLs exhibited higher exposure levels (indexed by area under concentration-time curve) than that of AD solution, artelinic acid liposomes or artelinic acid solution (P < 0.01). Taken together, ADLs exhibited promising antimalarial efficacy and pharmacokinetic characteristics.

The Why, Where, Who, How, and What of the vesicular delivery systems

Though vesicular delivery systems have been widely explored and reviewed, no comprehensive review exists that covers their development from the inception of the concept to its culmination in the form of regulated marketed formulations. With the advancement of scientific research in the field of nanomedicine, certain category of vesicular delivery systems have successfully reached the global market. Despite extensive research and highly encouraging results in a plethora of pathological conditions in the preclinical studies, translation of these nanomedicines from laboratory to market has been very limited. Aim of this review is to describe comprehensively the various colloidal delivery systems, focusing mainly on their conventional and advanced methods of preparation, different characterization techniques and main success stories of their journey from bench to bedside of the patient. The review also touches the finer nuances of the use of modern formulation approach of DoE (Design of Experiments) in their formulation and the status of regulatory guidelines for the approval of these nanomedicines.

Effect of nanoparticles on the therapeutic efficacy of praziquantel against Schistosoma mansoni infection in murine models

Praziquantel (PZQ) is the main treatment of Schistosomiasis mansoni. However, resistance to it was described. So, there is a necessity to develop novel drugs or to enhance the present drugs. This work aimed to assess the efficacy of PZQ alone and when loaded on liposomes in treatment of S. mansoni infection by parasitological and histopathological studies in experimental murine models. 112 male laboratories bred Swiss Albino mice were used in this work. They were divided into four groups: Group 1: control group; Group 2: infected then treated by PZQ (500 mg/kg) at 7, 30 and 45 days post infection; Group 3: infected then treated by liposome encapsulated PZQ (lip.PZQ) (500 mg/kg) at 7, 30 and 45 days post infection; Group 4: infected then treated by free liposomes at 7, 30 and 45 days post infection. The results showed that G3 caused the highest significant reduction of the total worm count, eggs/gram liver tissue and intestine (97.2%, 99.3%, 99.5%) respectively. Followed by G2 (85.1%, 97.6%, 89.8%) respectively. Regarding the histopathological studies, G3 showed the highest significant reduction in number and diameter of hepatic granuloma (97.6% and 98.1%), followed by G2 (77.2% and 75%) when compared to other groups. In conclusion, lip.PZQ is more effective than free PZQ from all aspects especially when administered 45 days PI.

Improving the Efficacy of Essential Oils as Antimicrobials in Foods: Mechanisms of Action

The consumer preference for clean-label products is requiring the food industry to reformulate their products by replacing artificial additives with natural alternatives. Essential oils are natural antimicrobials isolated from plant sources that have the potential to combat many foodborne pathogens and spoilage organisms. This review begins by discussing the antimicrobial properties of essential oils, the relationships between their chemical structure and antimicrobial efficacy, and their potential limitations for commercial applications (such as strong flavor, volatility, and chemical instability). We then review the commonly used methods for screening the antimicrobial efficacy of essential oils and elucidating their mechanisms of action. Finally, potential applications of essential oils as antimicrobials in foods are reviewed and the major types of food-grade delivery systems available for improving their efficacy are discussed.

A PRRSV GP5-Mosaic vaccine: Protection of pigs from challenge and ex vivo detection of IFNγ responses against several genotype 2 strains

Porcine reproductive and respiratory syndrome virus (PRRSV), is a highly mutable RNA virus that affects swine worldwide and its control is very challenging due to its formidable heterogeneity in the field. In the present study, DNA vaccines constructed with PRRSV GP5-Mosaic sequences were complexed to cationic liposomes and administered to experimental pigs by intradermal and intramuscular injection, followed by three boosters 14, 28 and 42 days later. The GP5-Mosaic vaccine thus formulated was immunogenic and induced protection from challenge in vaccinated pigs comparable to that induced by a wild type (VR2332) GP5 DNA vaccine (GP5-WT). Periodic sampling of blood and testing of vaccine-induced responses followed. Interferon-γ (IFN-γ) mRNA expression by virus-stimulated peripheral blood mononuclear cells (PBMCs) of GP5-Mosaic-vaccinated pigs was significantly higher compared to pigs vaccinated with either GP5-WT or empty vector at 21, 35 and 48 days after vaccination. Cross-reactive cellular responses were also demonstrated in GP5-Mosaic vaccinated pigs after stimulation of PBMCs with divergent strains of PRRSV. Thus, significantly higher levels of IFN-γ mRNA were detected when PBMCs from GP5-Mosaic-vaccinated pigs were stimulated by four Genotype 2 strains (VR2332, NADC9, NADC30 and SDSU73), which have at least 10% difference in GP5 amino acid sequences, while such responses were recorded only upon VR2332 stimulation in GP5-WT-vaccinated pigs. In addition, the levels of virus-specific neutralizing antibodies were higher in GP5-Mosaic or GP5-WT vaccinated pigs than those in vector-control pigs. The experimental pigs vaccinated with either the GP5-Mosaic vaccine or the GP5-WT vaccine were partially protected from challenge with VR2332, as measured by significantly lower viral loads in sera and tissues and lower lung lesion scores than the vector control group. These data demonstrate that the GP5-Mosaic vaccine can induce cross-reactive cellular responses to diverse strains, neutralizing antibodies, and protection in pigs.

Microencapsulation and Nanoencapsulation Using Supercritical Fluid (SCF) Techniques

The unique properties of supercritical fluids, in particular supercritical carbon dioxide (CO₂), provide numerous opportunities for the development of processes for pharmaceutical applications. One of the potential applications for pharmaceuticals includes microencapsulation and nanoencapsulation for drug delivery purposes. Supercritical CO₂ processes allow the design and control of particle size, as well as drug loading by utilizing the tunable properties of supercritical CO₂ at different operating conditions (flow ratio, temperature, pressures, etc.). This review aims to provide a comprehensive overview of the processes and techniques using supercritical fluid processing based on the supercritical properties, the role of supercritical carbon dioxide during the process, and the mechanism of formulation production for each process discussed. The considerations for equipment configurations to achieve the various processes described and the mechanisms behind the representative processes such as RESS (rapid expansion of supercritical solutions), SAS (supercritical antisolvent), SFEE (supercritical fluid extraction of emulsions), PGSS (particles from gas-saturated solutions), drying, and polymer foaming will be explained via schematic representation. More recent developments such as fluidized bed coating using supercritical CO₂ as the fluidizing and drying medium, the supercritical CO₂ spray drying of aqueous solutions, as well as the production of microporous drug releasing devices via foaming, will be highlighted in this review. Development and strategies to control and optimize the particle morphology, drug loading, and yield from the major processes will also be discussed.