Methods for Pretreatment of Lignocellulosic Biomass for Efficient Hydrolysis and Biofuel Production

Synthesis of β-ionone from xylose and lignocellulosic hydrolysate in genetically engineered oleaginous yeast Yarrowia lipolytica

β-ionone, an apocarotenoid derived from a C40 terpenoid has an intense, woody smell and a low odor threshold that has been widely used in as an ingredient in food and cosmetics. Yarrowia lipolytica is a promising host for β-ionone production because of its oleaginous nature, its ability to produce high levels of acetyl-CoA (an important precursor for terpenoids), and the availability of synthetic biology tools to engineer the organism. In this study, β-carotene-producing Y. lipolytica strain XK17 was employed for β-ionone biosynthesis. First, we explored the effect of different sources of carotenoid cleavage dioxygenase (CCD) genes on β-ionone production. A high-yielding strain rUinO-D14 with 122 mg/L of β-ionone was obtained by screening promoters combined with rDNA mediated multi-round iterative transformations to optimize the expression of the CCD gene of Osmanthus fragrans. Second, to further develop a high-level production strain for β-ionone, we optimized key genes in the mevalonate pathway by multi-round iterative transformations mediated by non-homologous end joining, combined with a protein tagging strategy. Finally, the introduction of a heterologous oxidoreductase pathway enabled the engineered Y. lipolytica strain to use xylose as a sole carbon source and produce β-ionone. In addition, the potential for use of lignocellulosic hydrolysate as the carbon source for β-ionone production showed that the NHA-A31 strain had a high β-ionone productivity level. This study demonstrates that engineered Y. lipolytica can be used for the efficient, green and sustainable production of β-ionone.

Life cycle assessment of tomato biomass residue anaerobic digestion preceded by ethanol-based organosolv and choline chloride-based deep eutectic solvent

Anaerobic digestion (AD) of lignocellulosic wastes (LW) has garnered substantial interest because of its notable energy and nutrient recovery, along with its potential for reducing greenhouse gas emissions. However, the LW is resistant to degradation, and its hydrolysis typically requires harsh conditions, hence the need for a pretreatment. Conducting a life cycle assessment (LCA) to evaluate the pretreatment of LW is an effective way to assess the environmental impacts associated with various pretreatment methods. This work evaluates and compares three scenarios for handling lignified tomato green waste (TGW), generated in the Greater of Agadir in Morocco, in terms of their environmental impacts and energy demand, using the LCA approach, performed with OpenLCA software. To achieve this aim, the impact of these scenarios on 11 indicators is studied. The analyzed management options include a base case scenario S0 where TGW undergoes a direct anaerobic digestion (AD), organosolv pretreatment of TGW followed by AD of the free-lignin fraction (S1), and choline chloride-based deep eutectic solvent (DES) delignification followed by AD of the free-lignin fraction (S2). The data used for the analysis comes from the Tamelast landfill, laboratory tests, literature, CML-IA baseline and Monte Carlo simulation calculations. The results obtained showed that the introduction of pretreatments in S1 and S2 mitigates significantly the environmental impact in different categories compared to S0. Scenario S2, with its enhanced recovery processes, shows the highest positive environmental contributions, despite its reliance on additional external electricity. S1 and S0 both respect energy circularity. Through this study, it has been demonstrated that chemical pretreatment of LW is energy, water and solvent-intensive and requires a large investment. It opens up perspectives for further works on pretreatment using natural DES technology, its development and its applications in the delignification of ligneous biomass on an industrial scale.

Maximizing microbial activity and synergistic interaction to boost biofuel production from lignocellulosic biomass

Addressing global environmental challenges and meeting the escalating energy demands stand as two pivotal issues in the current landscape. Lignocellulosic biomass emerges as a promising renewable bio-energy source capable of fulfilling the world's energy requirements on a large scale. One of the most important steps in lowering reliance on fossil fuel and lessening environmental effect is turning lignocellulosic biomass into biofuel. As carbon-neutral substitutes for traditional fuel, biofuel offer a solution to environmental concerns compared to conventional fuel. Effective utilization of lignocellulosic biomass is imperative for sustainable development. Ongoing research focuses on exploring the potential of various microorganisms and their co-interactions to synthesize diverse biofuels from different starting materials, including lignocellulosic biomass. Co-culture techniques demonstrate resilience to nutrient scarcity and environmental fluctuations. By utilising a variety of carbon sources, microbes can enhance their adaptability to environmental stressors and potentially increase productivity through their symbiotic interactions. Furthermore, compared to single organism involvement, co-interactions allow faster execution of multistep processes. Lignocellulosic biomass serves as a primary substrate for pre-treatment, fermentation, and enzymatic hydrolysis processes. This review primarily delves into the pretreatment, enzymatic hydrolysis process and the biochemical pathways involved in converting lignocellulosic biomass into bioenergy.

Pilot scale polyhydroxyalkanoates biopolymer production using pure cultures: current status and future opportunities

The development and commercialization of bio-based and biodegradable polyhydroxyalkanoates (PHAs) biopolymers could be crucial for the transition toward a sustainable circular economy. However, despite potential traditional and novel applications in the packaging, textiles, agriculture, automotive, electronics, and biomedical industries, the commercialization of PHAs is limited by their current market competitiveness. This review provides the first critical assessment of the current pure culture pilot-scale PHA literature, which could be crucial in translating promising laboratory-scale developments into industrial-scale commercial PHA production. It will also complement reviews of mixed microbial cultures currently dominating pilot-scale PHA literature. Pure culture fermentations could provide advantages, such as ease of characterizing microbial producers' behavior, higher PHA productivities, and better alignment with existing PHA commercialization and industrial biotechnology approaches. Key aspects, including producer organisms, fermentation volumes and schemes, control schemes, optimization, and properties of the polymers produced, are discussed in-depth, to elucidate important trends, achievements, and knowledge gaps. Furthermore, specific ways for future pilot-scale studies to help address current PHA commercialization challenges are also identified. The insights, and recommendations provided will be extremely beneficial for the future development of PHA production, at both pilot and commercial scales, whilst also being beneficial to the production of other microbial polymers and industrial biotechnology as a whole.

Insight into the microbial community of denitrification process using different solid carbon sources: Not only bacteria

There is a lack of understanding about the bacterial, fungal and archaeal communities' composition of solid-phase denitrification (SPD) systems. We investigated four SPD systems with different carbon sources by analyzing microbial gene sequences based on operational taxonomic unit (OTU) and amplicon sequence variant (ASV). The results showed that the corncob-polyvinyl alcohol sodium alginate-polycaprolactone (CPSP, 0.86±0.04 mg NO3--N/(g·day)) and corncob (0.85±0.06 mg NO3--N/(g·day)) had better denitrification efficiency than polycaprolactone (PCL, 0.29±0.11 mg NO3--N/(g·day)) and polyvinyl alcohol-sodium alginate (PVA-SA, 0.24±0.07 mg NO3--N/(g·day)). The bacterial, fungal and archaeal microbial composition was significantly different among carbon source types such as Proteobacteria in PCL (OTU: 83.72%, ASV: 82.49%) and Rozellomycota in PVA-SA (OTU: 71.99%, ASV: 81.30%). ASV methods can read more microbial units than that of OTU and exhibit higher alpha diversity and classify some species that had not been identified by OTU such as Nanoarchaeota phylum, unclassified_ f_ Xanthobacteraceae genus, etc., indicating ASV may be more conducive to understand SPD microbial communities. The co-occurring network showed some correlation between the bacteria fungi and archaea species, indicating different species may collaborate in SPD systems. Similar KEGG function prediction results were obtained in two bioinformatic methods generally and some fungi and archaea functions should not be ignored in SPD systems. These results may be beneficial for understanding microbial communities in SPD systems.

Utilization of Forest Residues for Cellulose Extraction from Timber Species in the High Montane Forest of Chimborazo, Ecuador

The present study explored the extraction of cellulose from forest residues of four timber species, namely Cedrela montana Moritz ex Turcz, Buddleja incana Ruiz & Pav, Vallea stipularis L. f. and Myrsine andina (Mez) Pipoly, in the high montane forest of Chimborazo province, Ecuador, for the sustainable utilization of leaves, branches, and flowers. An alkaline extraction method was used on the residues without the need for prior degreasing. An ANOVA analysis was applied to evaluate significant differences in cellulose extraction yields among the species' residues. The characterization techniques used were Fourier transform infrared spectroscopy (FTIR) and polarized light optical microscopy, which confirmed the successful extraction of cellulose with characteristics comparable to standard cotton cellulose and other traditional species. The results showed significant variations in cellulose yield among the species, with Vallea stipularis L. f achieving the highest yield of 80.83%. The crystallinity of the samples was clearly evidenced by the polarity of the light in the samples during microscopy, demonstrating that the residues can be a viable and sustainable source of cellulose, contributing to a circular economy and reducing the environmental impact of forest waste.

Structure changes of lignin and their effects on enzymatic hydrolysis for bioethanol production: a focus on lignin modification

Enzymatic hydrolysis contributes to obtaining fermentable sugars using pretreated lignocellulose materials for bioethanol generation. Unfortunately, the pretreatment of lignocellulose causes low substrate enzymatic hydrolysis, which is due to the structure changes of lignin to produce main phenolic by-products and non-productive cellulase adsorption. It is reported that modified lignin enhances the speed of enzymatic hydrolysis through single means to decrease the negative effects of fermentation inhibitors or non-productive cellulase adsorption. However, a suitable modified lignin should be selected to simultaneously reduce the fermentation inhibitors concentration and non-productive cellulase adsorption for saving resources and maximizing the enzymatic hydrolysis productivity. Meanwhile, the adsorption micro-mechanisms of modified lignin with fermentation inhibitors and cellulase remain elusive. In this review, different pretreatment effects toward lignin structure, and their impacts on subsequent enzymatic hydrolysis are analyzed. The main modification methods for lignin are presented. Density functional theory is used to screen suitable modification methods for the simultaneous reduction of fermentation inhibitors and non-productive cellulase adsorption. Lignin-fermentation inhibitors and lignin-cellulase interaction mechanisms are discussed using different advanced analysis techniques. This article addresses the gap in previous reviews concerning the application of modified lignin in the enhancement of bioethanol production. For the first time, based on existing studies, this work posits the hypothesis of applying theoretical simulations to screen efficient modified lignin-based adsorbents, in order to achieve a dual optimization of the detoxification and saccharification processes. We aim to improve the integrated lignocellulose transformation procedure for the effective generation of cleaner bioethanol.

Hydrothermal Carbonization of Biomass for Electrochemical Energy Storage: Parameters, Mechanisms, Electrochemical Performance, and the Incorporation of Transition Metal Dichalcogenide Nanoparticles

Given the pressing climate and sustainability challenges, shifting industrial processes towards environmentally friendly practices is imperative. Among various strategies, the generation of green, flexible materials combined with efficient reutilization of biomass stands out. This review provides a comprehensive analysis of the hydrothermal carbonization (HTC) process as a sustainable approach for developing carbonaceous materials from biomass. Key parameters influencing hydrochar preparation are examined, along with the mechanisms governing hydrochar formation and pore development. Then, this review explores the application of hydrochars in supercapacitors, offering a novel comparative analysis of the electrochemical performance of various biomass-based electrodes, considering parameters such as capacitance, stability, and textural properties. Biomass-based hydrochars emerge as a promising alternative to traditional carbonaceous materials, with potential for further enhancement through the incorporation of extrinsic nanoparticles like graphene, carbon nanotubes, nanodiamonds and metal oxides. Of particular interest is the relatively unexplored use of transition metal dichalcogenides (TMDCs), with preliminary findings demonstrating highly competitive capacitances of up to 360 F/g when combined with hydrochars. This exceptional electrochemical performance, coupled with unique material properties, positions these biomass-based hydrochars interesting candidates to advance the energy industry towards a greener and more sustainable future.

Thermophilic Hemicellulases Secreted by Microbial Consortia Selected from an Anaerobic Digester

The rise of agro-industrial activities over recent decades has exponentially increased lignocellulose biomasses (LCB) production. LCB serves as a cost-effective source for fermentable sugars and other renewable chemicals. This study explores the use of microbial consortia, particularly thermophilic consortia, for LCB deconstruction. Thermophiles produce stable enzymes that retain activity under industrial conditions, presenting a promising approach for LCB conversion. This research focused on two microbial consortia (i.e., microbiomes) that were analyzed for enzyme production using a cheap medium, i.e., a mixture of spent mushroom substrate (SMS) and digestate. The secreted xylanolytic enzymes were characterized in terms of temperature and pH optima, thermal stability, and hydrolysis products from LCB-derived polysaccharides. These enzymes showed optimal activity aligning with common biorefinery conditions and outperformed a formulated enzyme mixture in thermostability tests in the digestate. Phylogenetic and genomic analyses highlighted the genetic diversity and metabolic potential of these microbiomes. Bacillus licheniformis was identified as a key species, with two distinct strains contributing to enzyme production. The presence of specific glycoside hydrolases involved in the cellulose and hemicellulose degradation underscores these consortia's capacity for efficient LCB conversion. These findings highlight the potential of thermophilic microbiomes, isolated from an industrial environment, as a robust source of robust enzymes, paving the way for more sustainable and cost-effective bioconversion processes in biofuel and biochemical production and other biotechnological applications.

Reductant-independent oxidative cleavage of cellulose by a novel marine fungal lytic polysaccharide monooxygenase

Among the enzymes derived from fungus that act on polysaccharides, lytic polysaccharide monooxygenase (LPMOs) has emerged as a new member with complex reaction mechanisms and high efficiency in dealing with recalcitrant crystalline polysaccharides. This study reported the characteristics, structure, and biochemical properties of a novel LPMO from Talaromyces sedimenticola (namely MaLPMO9K) obtained from the Mariana Trench. MaLPMO9K was a multi-domain protein combined with main body and a carbohydrate-binding module. It was heterologously expressed in E. coli for analyzing peroxidase activity in reactions with the substrate 2,6-DMP, where H2O2 serves as a co-substrate. Optimal peroxidase activity for MaLPMO9K was observed at pH 8 and 25 °C, achieving the best Vmax value of 265.2 U·g-1. In addition, MaLPMO9K also demonstrated the ability to treat cellulose derivatives, and cellobiose substrates without the presence of reducing agents.

Advancements in sustainable production of biofuel by microalgae: Recent insights and future directions

Microalgae is considered as sustainable and viable feedstock for biofuel production due to its significant advantages over terrestrial plants. Algal biofuels have received significant attention among researchers and energy experts owing to an upsurge in global energy issues emanating from depletion in fossil fuel reserves increasing greenhouse gases emission conflict among agricultural crops, traditional biomass feedstock, and potential futuristic energy security. Further, the exploration of value-added microalgae as sustainable and viable feedstock for the production of variety of biofuels such as biogas, bio-hydrogen, bioethanol, and biodiesel are addressed. Moreover, the assessment of life-cycle, energy balance, and environmental impacts of biofuel production from microalgae are briefly discussed. The present study focused on recent advancements in synthetic biology, metabolic engineering tools, algal bio refinery, and the optimization of algae growth conditions. This paper also elucidates the function of microalgae as bio refineries, the conditions of algae-based cultures, and other operational factors that must be adjusted to produce biofuels that are price-competitive with fossil fuels.

The Role of Lignin Molecular Weight on Activated Carbon Pore Structure

Over the past decade, the production of biofuels from lignocellulosic biomass has steadily increased to offset the use of fuels from petroleum. To make biofuels cost-competitive, however, it is necessary to add value to the "ligno-" components (up to 30% by mass) of the biomass. The properties of lignin, in terms of molecular weight (MW), chemical functionality, and mineral impurities often vary from biomass source and biorefinery process, resulting in a challenging precursor for product development. Activated carbon (AC) is a feasible target for the lignin-rich byproduct streams because it can be made from nearly any biomass, and it has a market capacity large enough to use much of the lignin generated from the biorefineries. However, it is not known how the variability in the lignin affects the key properties of AC, because, until now, they could not be well controlled. In this work, various fractions of ultraclean (<0.6% ash) lignin are created with refined MW distributions using Aqueous Lignin Purification using Hot Agents (ALPHA) and used as precursors for AC. AC is synthesized via zinc chloride activation and characterized for pore structure and adsorption capacity. We show that AC surface area and the adsorption capacity increase when using lignin with increasing MW, and, furthermore, that reducing the mineral content of lignin can significantly enhance the AC properties. The surface area of the AC from the highest MW lignin can reach ~1830 m2/g (absorption capacity). Furthermore, single step activation carbonization using zinc chloride allows for minimal carbon burn off (<30%), capturing most of the lignin carbon compared to traditional burn off methods in biorefineries for heat generation.

Sustainable media feedstocks for cellular agriculture

The global food system is shifting towards cellular agriculture, a second domestication marked by cultivating microorganisms and tissues for sustainable food production. This involves tissue engineering, precision fermentation, and microbial biomass fermentation to establish food value chains independent of traditional agriculture. However, these techniques rely on growth media sourced from agricultural, chemical (fossil fuels), and mining supply chains, raising concerns about land use competition, emissions, and resource depletion. Fermentable sugars, nitrogen, and phosphates are key ingredients derived from starch crops, energy-intensive fossil fuel based processes, and finite phosphorus resources, respectively. This review explores sustainable alternatives to reduce land use and emissions associated with cellular agriculture media ingredients. Sustainable alternatives to first generation sugars (lignocellulosic substrates, sidestreams, and gaseous feedstocks), sustainable nitrogen sources (sidestreams, green ammonia, biological nitrogen fixation), and efficient use of phosphates are reviewed. Especially cellulosic sugars, gaseous chemoautotrophic feedstocks, green ammonia, and phosphate recycling are the most promising technologies but economic constraints hinder large-scale adoption, necessitating more efficient processes and cost reduction. Collaborative efforts are vital for a biotechnological future grounded in sustainable feedstocks, mitigating competition with agricultural land and emissions.

Characterization of a highly thermostable recombinant xylanase from Anoxybacillus ayderensis

Xylanases are the main enzymes to hydrolyze xylan, the major hemicellulose found in lignocellulose. Xylanases also have a wide range of industrial applications. Therefore, the discovery of new xylanases has the potential to enhance efficiency and sustainability in many industries. Here, we report a xylanase with thermophilic character and superior biochemical properties for industrial use. The new xylanase is discovered in Anoxybacillus ayderensis as an intracellular xylanase (AAyXYN329) and recombinantly produced. While AAyXYN329 shows significant activity over a wide pH and temperature range, optimum activity conditions were determined as pH 6.5 and 65 °C. The half-life of the enzyme was calculated as 72 h at 65 °C. The enzyme did not lose activity between pH 6.0-9.0 at +4 °C for 75 days. Km, kcat and kcat/Km values of AAyXYN329 were calculated as 4.09824 ± 0.2245 μg/μL, 96.75 1/sec, and 23.61/L/g.s -1, respectively. In conclusion, the xylanase of A. ayderensis has an excellent potential to be utilized in many industrial processes.

Recent developments on sustainable biobutanol production: a novel integrative review

Renewable and sustainable biofuel production, such as biobutanol, is becoming increasingly popular as a substitute for non-renewable and depleted petrol fuel. Many researchers have studied how to produce butanol cheaply by considering appropriate feedstock materials and bioprocess technologies. The production of biobutanol through acetone-butanol-ethanol (ABE) is highly sought after around the world because of its sustainable supply and lack of competition with food. The purpose of this study is to present the current biobutanol production research and to analyse the biobutanol research conducted during 2006 to 2023. The keyword used in this study is "Biobutanol," and the relevant data was extracted from the Web of Science database (WoS). According to the results, institutions and scholars from the People's Republic of China, the USA, and India have the highest number of cited papers across a broad spectrum of topics including acetone-butanol-ethanol (ABE) fermentation, biobutanol, various pretreatment techniques, and pervaporation. The success of biobutanol fermentation from biomass depends on the ability of the fermentation operation to match the microbial behaviour along with the appropriate bioprocessing strategies to improve the entire process to be suitable for industrial scale. Based on the review data, we will look at the biobutanol technologies and appropriate strategies that have been developed to improve biobutanol production from renewable biomass.

Evaluating lignin degradation under limited oxygen conditions by bacterial isolates from forest soil

Lignin, a heterogeneous aromatic polymer present in plant biomass, is intertwined with cellulose and hemicellulose fibrils, posing challenges to its effective utilization due to its phenolic nature and recalcitrance to degradation. In this study, three lignin utilizing bacteria, Klebsiella sp. LEA1, Pseudomonas sp. LEA2, and Burkholderia sp. LEA3, were isolated from deciduous forest soil samples in Nan province, Thailand. These isolates were capable of growing on alkali lignin and various lignin-associated monomers at 40 °C under microaerobic conditions. The presence of Cu2+ significantly enhanced guaiacol oxidation in Klebsiella sp. LEA1 and Pseudomonas sp. LEA2. Lignin-related monomers and intermediates such as 2,6-dimethoxyphenol, 4-vinyl guaiacol, 4-hydroxybenzoic acid, benzoic acid, catechol, and succinic acid were detected mostly during the late stage of incubation of Klebsiella sp. LEA1 and Pseudomonas sp. LEA2 in lignin minimal salt media via GC-MS analysis. The intermediates identified from Klebsiella sp. LEA1 degradation suggested that conversion and utilization occurred through the β-ketoadipate (ortho-cleavage) pathway under limited oxygen conditions. The ability of these bacteria to thrive on alkaline lignin and produce various lignin-related intermediates under limited oxygen conditions suggests their potential utility in oxygen-limited processes and the production of renewable chemicals from plant biomass.

Enhancing anaerobic digestion of lignocellulosic biomass by mechanical cotreatment

BACKGROUND

The aim of this study was to increase the accessibility and accelerate the breakdown of lignocellulosic biomass to methane in an anaerobic fermentation system by mechanical cotreatment: milling during fermentation, as an alternative to conventional pretreatment prior to biological deconstruction. Effluent from a mesophilic anaerobic digester running with unpretreated senescent switchgrass as the predominant carbon source was collected and subjected to ball milling for 0.5, 2, 5 and 10 min. Following this, a batch fermentation test was conducted with this material in triplicate for an additional 18 days with unmilled effluent as the 'status quo' control.

RESULTS

The results indicate 0.5 - 10 min of cotreatment increased sugar solubilization by 5- 13% when compared to the unmilled control, with greater solubilization correlated with increased milling duration. Biogas concentrations ranged from 44% to 55.5% methane with the balance carbon dioxide. The total biogas production was statistically higher than the unmilled control for all treatments with 2 or more minutes of milling (α = 0.1). Cotreatment also decreased mean particle size. Energy consumption measurements of a lab-scale mill indicate that longer durations of milling offer diminishing benefits with respect to additional methane production.

CONCLUSIONS

Cotreatment in anaerobic digestion systems, as demonstrated in this study, provides an alternative approach to conventional pretreatments to increase biogas production from lignocellulosic grassy material.

Enhancing quality of ruminant feed through fungal treatment: Usage of bamboo shoot residues

In this investigation, we explore the harnessing of bamboo shoot residues (BSR) as a viable source for ruminant feed through fungal treatment, with the overarching objective of elevating feed quality and optimizing bamboo shoot utilization. The white-rot fungi (Wr.fungi), Aspergillus niger (A.niger), and its co-cultures (A.niger&Wr.fungi) were employed to ferment BSR. And the impact of different fermentation methods and culture time on the chemical composition (Crude protein Ash, neutral detergent fibre and acid detergent fibers), enzyme activity (Cellulase, Laccase, Filter paperase and Lignin peroxidase activities), and rumen digestibility in vitro were assessed. The findings reveal a nota ble 30.39% increase in crude protein in fermented BSR, accompanied by respective decreases of 13.02% and 17.31% in acid detergent fiber and neutral detergent fibre content. Enzyme activities experienced augmentation post-fermentation with A.niger&Wr.fungi. Specifically, the peak Cellulase, Laccase, and Lignin peroxidase activities for BSR with Wr.fungi treatment reached 748.4 U/g, 156.92 U/g, and 291.61 U/g, respectively, on the sixth day of fermentation. Concurrently, NH3-N concentration exhibited an upward trend with prolonged fermentation time. Total volatile fatty acids registered a decline, and the Acetate/Propionate ratio reached its nadir after 6 days of fermentation under the A.niger&Wr.fungi treatment. These outcomes furnish a theoretical foundation for the development of ruminant feeds treated via fungal co-culture.

Sustainable biorefinery approach by utilizing xylose fraction of lignocellulosic biomass

Lignocellulosic biomass (LCB) has been a lucrative feedstock for developing biochemical products due to its rich organic content, low carbon footprint and abundant accessibility. The recalcitrant nature of this feedstock is a foremost bottleneck. It needs suitable pretreatment techniques to achieve a high yield of sugar fractions such as glucose and xylose with low inhibitory components. Cellulosic sugars are commonly used for the bio-manufacturing process, and the xylose sugar, which is predominant in the hemicellulosic fraction, is rejected as most cell factories lack the five‑carbon metabolic pathways. In the present review, more emphasis was placed on the efficient pretreatment techniques developed for disintegrating LCB and enhancing xylose sugars. Further, the transformation of the xylose to value-added products through chemo-catalytic routes was highlighted. In addition, the review also recapitulates the sustainable production of biochemicals by native xylose assimilating microbes and engineering the metabolic pathway to ameliorate biomanufacturing using xylose as the sole carbon source. Overall, this review will give an edge on the bioprocessing of microbial metabolism for the efficient utilization of xylose in the LCB.

High extraction and excellent anti-UV and anti-oxidant proprieties of lignin from Reseda Luteola L. waste by organosolv process

Lignin is an abundant natural biopolymer found in plant cell walls. Lignin can come from tinctorial plants, whose residual biomass after dye extraction was typically discarded as waste. The main objective of this study was to extract lignin from the residual biomass of Reseda luteola L. using an organosolv process and to optimize the extraction conditions. The extracted lignin was characterized, and its potential applications as an antimicrobial, anti-oxidant, and anti-UV agent were investigated. Response surface methodology based on a Box-Behnken design was employed to optimize the lignin extraction conditions (organic acid concentration, material-to-liquid ratio, extraction time). The extracted lignin was comprehensively characterized using NMR, FTIR, XRD, SEM-EDX, TGA, DSC, and UV-Vis techniques. The optimal extraction conditions yielded a remarkably high lignin recovery of 62.41 % from the plant waste, which was rarely achieved for non-wood plants in previous works. The extracted lignin exhibited excellent thermal stability and radical scavenging anti-oxidant activity but no significant antimicrobial effects. Treating wool fabrics with lignin nanoparticles substantially enhanced UV protection from the "good" to "excellent" category based on the UPF rating. This sustainable valorization approach converted abundant tinctorial plant waste into high-purity lignin with promising anti-oxidant and UV-blocking properties suitable for various applications.

Lignocellulosic biomass fertilizers: Production, characterization, and agri-applications

The growing focus on sustainable agriculture and optimal resource utilization has spurred investigations into lignocellulosic biomass as a potential source for producing environmentally friendly fertilizers. This paper reviews recent advancements in the production and application of innovative fertilizers derived from lignocellulose. It highlights potential in enhancing agricultural productivity and reducing environmental impacts such as carbon footprint and water pollution. The paper outlines various methods for conversion, highlighting the unique advantages of chemical, enzymatic, and microbiological processes, for converting lignocellulosic biomass into nutrient-rich fertilizers. The study compares the efficacy of lignocellulosic fertilizers to traditional fertilizers in promoting crop growth, enhancing soil health, and reducing nutrient losses. The results demonstrate the potential of lignocellulosic biomass-derived fertilizers in promoting resource efficiency and sustainable agriculture. While this research significantly contributes to the existing body of knowledge, further studies on long-term impacts and scalability are recommended for the development of innovative and sustainable agricultural practices.

Green, chemical-free, and high-yielding extraction of nanocellulose from waste cotton fabric enabled by electron beam irradiation

Recycling and high-value reutilization of waste cotton fabrics (WCFs) has attracted a widespread concern. One potential solution is to extract nanocellulose. Sulfuric acid hydrolysis is a conventional method for the production of nanocellulose with high negative charge from WCFs. However, the recycling and disposal of chemicals in nanocellulose production, along with low yields, remain significant challenges. Consequently, there is a pressing need for a sustainable method to produce nanocellulose at higher yield without the use of chemicals. Herein, we propose a green, sustainable and chemical-free method to extract nanocellulose from WCFs. The nanocellulose displayed a rod-like shape with a length of 50-300 nm, a large aspect ratio of 18.4 ± 2 and the highest yield of up to 89.9 %. The combined short-time and efficient two-step process, involving electron beam irradiation (EBI) and high-pressure homogenization (HPH), offers a simple and efficient alternative approach with a low environmental impact, to extract nanocellulose. EBI induced a noticeable degradation in WCFs and HPH exfoliated cellulose to nano-size with high uniformity via mechanical forces. The as-prepared nanocellulose exhibits excellent emulsifying ability as the Pickering emulsion emulsifier. This work provides a facile and efficient approach for nanocellulose fabrication as well as a sustainable way for recycle and reutilization of the waste cotton fabrics.

Renewable Energy Potential: Second-Generation Biomass as Feedstock for Bioethanol Production

Biofuels are clean and renewable energy resources gaining increased attention as a potential replacement for non-renewable petroleum-based fuels. They are derived from biomass that could either be animal-based or belong to any of the three generations of plant biomass (agricultural crops, lignocellulosic materials, or algae). Over 130 studies including experimental research, case studies, literature reviews, and website publications related to bioethanol production were evaluated; different methods and techniques have been tested by scientists and researchers in this field, and the most optimal conditions have been adopted for the generation of biofuels from biomass. This has ultimately led to a subsequent scale-up of procedures and the establishment of pilot, demo, and large-scale plants/biorefineries in some regions of the world. Nevertheless, there are still challenges associated with the production of bioethanol from lignocellulosic biomass, such as recalcitrance of the cell wall, multiple pretreatment steps, prolonged hydrolysis time, degradation product formation, cost, etc., which have impeded the implementation of its large-scale production, which needs to be addressed. This review gives an overview of biomass and bioenergy, the structure and composition of lignocellulosic biomass, biofuel classification, bioethanol as an energy source, bioethanol production processes, different pretreatment and hydrolysis techniques, inhibitory product formation, fermentation strategies/process, the microorganisms used for fermentation, distillation, legislation in support of advanced biofuel, and industrial projects on advanced bioethanol. The ultimate objective is still to find the best conditions and technology possible to sustainably and inexpensively produce a high bioethanol yield.

Highly crystalline cellulose microparticles from dealginated seaweed waste ameliorate high fat-sugar diet-induced hyperlipidemia in mice by modulating gut microbiota

The effects of seaweed cellulose (SC) on high fat-sugar diet (HFSD)-induced glucolipid metabolism disorders in mice and potential mechanisms were investigated. SC was isolated from dealginated residues of giant kelp (Macrocystis pyrifera), with a crystallinity index of 85.51 % and an average particle size of 678.2 nm. Administering SC to C57BL/6 mice at 250 or 500 mg/kg BW/day via intragastric gavage for six weeks apparently inhibited the development of HFSD-induced obesity, dyslipidemia, insulin resistance, oxidative stress and liver damage. Notably, SC intervention partially restored the structure and composition of the gut microbiota altered by the HFSD, substantially lowering the Firmicutes to Bacteroidetes ratio, and greatly increasing the relative abundance of Lactobacillus, Bifidobacterium, Oscillospira, Bacteroides and Akkermansia, which contributed to improved short-chain fatty acid (SCFA) production. Supplementing with a higher dose of SC led to more significant increases in total SCFA (67.57 %), acetate (64.56 %), propionate (73.52 %) and butyrate (66.23 %) concentrations in the rectal contents of HFSD-fed mice. The results indicated that highly crystalline SC microparticles could modulate gut microbiota dysbiosis and ameliorate HFSD-induced obesity and related metabolic syndrome in mice. Furthermore, particle size might have crucial impact on the prebiotic effects of cellulose as insoluble dietary fiber.

Valorization of crop residues and animal wastes: Anaerobic co-digestion technology

To switch the over-reliance on fossil-based resources, curb environmental quality deterioration, and promote the use of renewable fuels, much attention has recently been directed toward the implementation of sustainable and environmentally benign 'waste-to-energy' technology exploiting a clean, inexhaustible, carbon-neutral, and renewable energy source, namely agricultural biomass. From this perspective, anaerobic co-digestion (AcoD) technology emerges as a potent and plausible approach to attain sustainable energy development, foster environmental sustainability, and, most importantly, circumvent the key challenges associated with mono-digestion. This review article provides a comprehensive overview of AcoD as a biochemical valorization pathway of crop residues and livestock manure for biogas production. Furthermore, this manuscript aims to assess the different biotic and abiotic parameters affecting co-digestion efficiency and present recent advancements in pretreatment technologies designed to enhance feedstock biodegradability and conversion rate. It can be concluded that the substantial quantities of crop residues and animal waste generated annually from agricultural practices represent valuable bioenergy resources that can contribute to meeting global targets for affordable renewable energy. Nevertheless, extensive and multidisciplinary research is needed to evolve the industrial-scale implementation of AcoD technology of livestock waste and crop residues, particularly when a pretreatment phase is included, and bridge the gap between small-scale studies and real-world applications.

Achieving cinnamic acid amides in water by a variant of acyltransferase from Mycobacterium smegmatis and its immobilized form using Ni-NTA modified aspen powder as a carrier

An aqueous N-acylation reaction for preparing cinnamic acid amides was realized by using a variant of acyltransferase from Mycobacterium smegmatis (MsAcT-L12A), whereas the wild-type MsAcT showed no activity. MsAcT-L12A exhibited broad substrate adaptability, and preferred the substrates with electron-donating group. When the vinyl cinnamate (1a, 40 mM) and p-methoxyaniline (2a, 4 mM) were involved in the reaction, the excellent yield reached to 86.7 % ± 2.1 % within 3 h by MsAcT-L12A (1 mgpro./mL) in a PBS buffer (100 mM, pH 8.0) at 25 °C. The aqueous N-acylation reaction could be further improved by using an immobilized MsAcT-L12A. The biomass aspen powder (AP) as a carrier provided a low-cost, green, and environmental-friendly immobilization strategy. After it was modified by Ni-NTA, the obtained Ni-NAP could realize one-step purification and immobilization of MsAcT-L12A. The accomplished MsAcT-L12A-Ni-NAP exhibited excellent stability and recyclability, and retained its relative yield as 83.3 % ± 2.2 % even after the 7th cycle of reuse. Using only PBS buffer as a reaction medium, the operation for MsAcT-L12A-catalyzed acyl transfer was greatly simplified, and the improved stabilities of MsAcT-L12A-Ni-NAP could enhance its application potential.

Methane production and lignocellulosic degradation of wastes from rice, corn and sugarcane by natural anaerobic fungi-methanogens co-culture

Biomass from agriculture, forestry, and urban wastes is a potential renewable organic resource for energy generation. Many investigations have demonstrated that anaerobic fungi and methanogens could be co-cultured to degrade lignocellulose for methane generation. Thus, this study aimed to evaluate the effect of natural anaerobic fungi-methanogens co-culture on the methane production and lignocellulosic degradation of wastes from rice, corn and sugarcane. Hu sheep rumen digesta was used to develop a natural anaerobic fungi-methanogen co-culture. The substrates were rice straw (RS), rich husk (RH), corn stover (CS), corn cobs (CC), and sugarcane baggage (SB). Production of total gas and methane, metabolization rate of reducing sugar, glucose, and xylose, digestibility of hemicellulose and cellulose, activity of carboxymethylcellulase and xylanase, and concentrations of total acid and acetate were highest (P < 0.05) in CC, moderate (P < 0.05) in RS and CS, and lowest (P < 0.05) in SB and RH. The pH, lactate and ethanol were lowest (P < 0.05) in CC, moderate (P < 0.05) in RS and CS, and lowest (P < 0.05) SB and RH. Formate was lowest (P < 0.05) in CC, RS and CS, moderate (P < 0.05) in SB, and lowest (P < 0.05) in RH. Therefore, this study indicated that the potential of methane production and lignocellulosic degradation by natural anaerobic fungi-methanogens co-culture were highest in CC, moderate in RS and CS, and lowest in SB and RH.

A Network of Processes for Biorefining Burdock Seeds and Roots

In this work, a novel sustainable approach was proposed for the integral valorisation of Arctium lappa (burdock) seeds and roots. Firstly, a preliminary recovery of bioactive compounds, including unsaturated fatty acids, was performed. Then, simple sugars (i.e., fructose and sucrose) and phenolic compounds were extracted by using compressed fluids (supercritical CO2 and propane). Consequently, a complete characterisation of raw biomass and extraction residues was carried out to determine the starting chemical composition in terms of residual lipids, proteins, hemicellulose, cellulose, lignin, and ash content. Subsequently, three alternative ways to utilise extraction residues were proposed and successfully tested: (i) enzymatic hydrolysis operated by Cellulases (Thricoderma resei) of raw and residual biomass to glucose, (ii) direct ethanolysis to produce ethyl levulinate; and (iii) pyrolysis to obtain biochar to be used as supports for the synthesis of sulfonated magnetic iron-carbon catalysts (Fe-SMCC) to be applied in the dehydration of fructose for the synthesis of 5-hydroxymethylfurfural (5-HMF). The development of these advanced approaches enabled the full utilisation of this resource through the production of fine chemicals and value-added compounds in line with the principles of the circular economy.

Cellulose fibers and ellagitannin-rich extractives from rambutan (Nephelium Lappaceum L.) peel by an eco-friendly approach

This study assesses the viability of an accelerated solvent extraction technique employing environmentally friendly solvents to extract ellagitannins while producing cellulose-rich fibers from rambutan peel. Two sequential extraction protocols were investigated: 1) water followed by acetone/water (4:1, v:v), and 2) acetone followed by acetone/water (4:1, v:v), both performed at 50 °C. The first protocol had a higher extraction yield of 51 %, and the obtained extractives featured a higher total phenolic (531.4 ± 22.0 mg-GAE/g) and flavonoid (487.3 ± 16.9 mg-QE/g) than the second protocol (495.4 ± 32.8 mg-GAE/g and 310.6 ± 31.4 mg-QE/g, respectively). The remaining extractive-free fibers were processed by bleaching using either 2 wt% sodium hydroxide with 3 wt% hydrogen peroxide or 4-5 wt% peracetic acid. Considering bleaching efficiency, yield, and process sustainability, the single bleaching treatment with 5 wt% of peracetic acid was selected as the most promising approach to yield cellulose-rich fibers. The samples were analyzed by methanolysis to determine the amount and type of poly- and oligosaccharides and studied by 13C solid-state nuclear magnetic resonance spectroscopy and thermal gravimetric analysis. The products obtained from the peels demonstrate significant potential for use in various sectors, including food, nutraceuticals, cosmetics, and paper production.

Immobilizing white-rot fungi laccase: Toward bio-derived supports as a circular economy approach in organochlorine removal

Despite their high persistence in the environment, organochlorines (OC) are widely used in the pharmaceutical industry, in plastics, and in the manufacture of pesticides, among other applications. These compounds and the byproducts of their decomposition deserve attention and efficient proposals for their treatment. Among sustainable alternatives, the use of ligninolytic enzymes (LEs) from fungi stands out, as these molecules can catalyze the transformation of a wide range of pollutants. Among LEs, laccases (Lac) are known for their efficiency as biocatalysts in the conversion of organic pollutants. Their application in biotechnological processes is possible, but the enzymes are often unstable and difficult to recover after use, driving up costs. Immobilization of enzymes on a matrix (support or solid carrier) allows recovery and stabilization of this catalytic capacity. Agricultural residual biomass is a passive environmental asset. Although underestimated and still treated as an undesirable component, residual biomass can be used as a low-cost adsorbent and as a support for the immobilization of enzymes. In this review, the adsorption capacity and immobilization of fungal Lac on supports made from residual biomass, including compounds such as biochar, for the removal of OC compounds are analyzed and compared with the use of synthetic supports. A qualitative and quantitative comparison of the reported results was made. In this context, the use of peanut shells is highlighted in view of the increasing peanut production worldwide. The linkage of methods with circular economy approaches that can be applied in practice is discussed.

Surfactant-assisted dilute ethylenediamine fractionation of corn stover for technical lignin valorization and biobutanol production

In this study, a surfactant-assisted diluted ethylenediamine (EDA) fractionation process was investigated for co-generation of technical lignin and biobutanol from corn stover. The results showed that the addition of PEG 8000 significantly enhanced cellulose recovery (88.9 %) and lignin removal (68.9 %) in the solid fraction. Moreover, the pulp achieved 86.5 % glucose yield and 82.6 % xylose yield in enzymatic hydrolysis. Structural characterization confirmed that the fractionation process promoted the preservation of active β-O-4 bonds (35.8/100R) in isolated lignin and functionalized the lignin through structural modification using EDA and surfactant grafting. The enzymatic hydrolysate of the pulps yielded a sugar solution for acetone-butanol-ethanol (ABE) fermentation, resulting in an ABE concentration of 15.4 g/L and an overall yield of 137.2 g/Kg of dried corn stalk. Thus, the surfactant-assisted diluted EDA fractionation has the potential to enhance the overall economic feasibility of second-generation biofuels production within the framework of biorefinery.

Solar reforming as an emerging technology for circular chemical industries

The adverse environmental impacts of greenhouse gas emissions and persistent waste accumulation are driving the demand for sustainable approaches to clean-energy production and waste recycling. By coupling the thermodynamically favourable oxidation of waste-derived organic carbon streams with fuel-forming reduction reactions suitable for producing clean hydrogen or converting CO2 to fuels, solar reforming simultaneously valorizes waste and generates useful chemical products. With appropriate light harvesting, catalyst design, device configurations and waste pre-treatment strategies, a range of sustainable fuels and value-added chemicals can already be selectively produced from diverse waste feedstocks, including biomass and plastics, demonstrating the potential of solar-powered upcycling plants. This Review highlights solar reforming as an emerging technology that is currently transitioning from fundamental research towards practical application. We investigate the chemistry and compatibility of waste pre-treatment, introduce process classifications, explore the mechanisms of different solar reforming technologies, and suggest appropriate concepts, metrics and pathways for various deployment scenarios in a net-zero-carbon future.

Sugar cane bagasse hydrolysate (SBH) as a lucrative carbon supplement to upgrade the lipid and fatty acid production in Chlorococcum sp. for biodiesel through an optimized binary solvent system

Cost is the crucial impediment in commercializing microalgal biodiesel. Therefore, cultivating microalgae in cost-effective nutrients reduces the upstream process cost remarkably. Thus, in this study, sugar cane bagasse hydrolysate (SBH) as a lucrative carbon supplement for Chlorococcum sp. and subsequent lipid extraction via an optimized solvent system for biodiesel production was investigated. Characterization of SBH revealed the presence of various monosaccharides and other sugar derivatives such as glucose, fructose, xylose, arabinose, etc. The maximum dry cell weight of 1.7 g/L was estimated in cultures grown in 10 mL SBH. Different solvents such as diethyl ether (DEE), chloroform (CHL), ethyl acetate (ETA), hexane (HEX), methanol (MET), ethanol (ETOH), acetone (ACE) and also combination of solvents (2:1 ratio) such as DEE: MET, CHL: MET, HEX: MET, HEX: ETOH was tested for lipid extraction efficacy. Among solvents used, 12.3% and 18.4% of lipids were extracted using CHL and CHL: MET, respectively, from 10 mL SBH amended cultures. However, the biodiesel yield was found to be similar at about 70.16 % in both SBH and no SBH-added cultures. The fatty acid profile of the biodiesel shows palmitic, oleic, linoleic, linolenic, and arachidonic acid as principal fatty acids. Further, the levels of SFAs, MUFAs, and PUFAs in 10 mL SBH-added cells were 24.67, 12.89, and 34.24%, respectively. Eventually, the fuel properties of Chlorococcum sp. biodiesel, satisfying international biodiesel standards, make the biodiesel a viable diesel substitute in the future.

Comparison of hydrothermolysis and mild-alkaline pretreatment methods on enhancing succinic acid production from hydrolyzed corn fiber

In the present work, mild alkaline pretreatments using either sodium hydroxide (0.05 g/g corn fiber) or calcium hydroxide (lime) (0.05 g/g corn fiber) were optimized and compared with hydrothermolysis pretreatment to enhance bioproduction of succinic acid from hydrolyzed corn fiber. The concentration, yield, and productivity of succinic acid from sodium hydroxide corn fiber hydrolysate (SH-CFH) were 14.0 g/L, 0.63 g/g sugars, and 0.47 g/L*h, respectively, while the concentration, yield, and productivity of succinic acid from hydrothermolysis-pretreated corn fiber hydrolysate (H-CFH) were 30.2 g/L, 0.71 g/g sugars, and 1.01 g/L*h, respectively. Very little succinic acid production (<1 g/L) was observed from lime pretreated corn fiber hydrolysate (L-CFH). When SH-CFH was supplemented only with yeast extract, succinic acid concentration was enhanced to 15.2 g/L with a yield of 0.64 g/g sugars, and productivity of 0.51 g/L*h. In this study, succinic acid concentration and productivity from H-CFH both increased by 8.6% and an succinic acid yield from sugars increased 1.2 times when compared to succinic acid production from H-CFH in a previous study in our lab.

Utilization of agricultural wastes for co-production of xylitol, ethanol, and phenylacetylcarbinol: A review

Corn, rice, wheat, and sugar are major sources of food calories consumption thus the massive agricultural waste (AW) is generated through agricultural and agro-industrial processing of these raw materials. Biological conversion is one of the most sustainable AW management technologies. The abundant supply and special structural composition of cellulose, hemicellulose, and lignin could provide great potential for waste biological conversion. Conversion of hemicellulose to xylitol, cellulose to ethanol, and utilization of remnant whole cells biomass to synthesize phenylacetylcarbinol (PAC) are strategies that are both eco-friendly and economically feasible. This co-production strategy includes essential steps: saccharification, detoxification, cultivation, and biotransformation. In this review, the implemented technologies on each unit step are described, the effectiveness, economic feasibility, technical procedures, and environmental impact are summarized, compared, and evaluated from an industrial scale viewpoint.

Insights into the poplar cell wall deconstruction following deep eutectic solvent pretreatment for enhanced enzymatic saccharification and lignin valorization

In this study, a combination of microcosmic and chemical analysis methods was used to investigate deep eutectic solvent (DES) pretreatment effects on cell wall's micromorphology and lignin's dissolution regular, in order to achieve high-performance biorefinery. The atomic force microscope observed that DES pretreatment peeled off non-cellulose components to reduced "anti-degradation barrier", resulting to improve the enzymatic saccharification from 12.36 % to 90.56 %. In addition, DES pretreatment can break the β-O-4 bond between the lignin units resulting in a decline in molecular weight from 3187 g/mol to 1112 g/mol (0-6 h). However, long pretreatment time resulted regenerated lignin samples repolymerization. Finally, DES has good recoverability which showed saccharification still can reach 51.51 % at 6 h following four recycling rounds and regenerated lignin also had a typical and well-preserved structure. In general, this work offers important information for industrial biorefinery technologies and lignin valorization.

A Review on Barrier Properties of Cellulose/Clay Nanocomposite Polymers for Packaging Applications

Packaging materials are used to protect consumer goods, such as food, drinks, cosmetics, healthcare items, and more, from harmful gases and physical and chemical damage during storage, distribution, and handling. Synthetic plastics are commonly used because they exhibit sufficient characteristics for packaging requirements, but their end lives result in environmental pollution, the depletion of landfill space, rising sea pollution, and more. These exist because of their poor biodegradability, limited recyclability, etc. There has been an increasing demand for replacing these polymers with bio-based biodegradable materials for a sustainable environment. Cellulosic nanomaterials have been proposed as a potential substitute in the preparation of packaging films. Nevertheless, their application is limited due to their poor properties, such as their barrier, thermal, and mechanical properties, to name a few. The barrier properties of materials play a pivotal role in extending and determining the shelf lives of packaged foods. Nanofillers have been used to enhance the barrier properties. This article reviews the literature on the barrier properties of cellulose/clay nanocomposite polymers. Cellulose extraction stages such as pretreatment, bleaching, and nanoparticle isolation are outlined, followed by cellulose modification methods. Finally, a brief discussion on nanofillers is provided, followed by an extensive literature review on the barrier properties of cellulose/clay nanocomposite polymers. Although similar reviews have been presented, the use of modification processes applied to cellulose, clay, and final nanocomposites to enhance the barrier properties has not been reviewed. Therefore, this article focuses on this scope.

Direct dissolution of unbleached pulp from corncob and wheat straw in N-methylmorpholine-N-oxide

Lignocellulose, as a kind of abundant natural resource, continuously developed to convert high value-added biological products is of great significance. Herein, we report a N-methylmorpholine-N-oxide (NMMO) solvent system to completely dissolve unbleached pulp to prepare a renewable lignin-containing cellulose film. The viscosity of the completely dissolved cellulose solution was measured using a high-pressure rotary rheometer. The shear viscosity exceeded 85 Pa·s at a shear rate of 1.62 s-1. It exhibited shear-thinning non-Newtonian fluid behavior with increasing shear rate. CF-WS had excellent tensile strength (>73 MPa), and exhibited unique optical properties of high transmittance in the visible region and high shielding performance in the ultraviolet region. When the thickness is only 0.016 mm, the UV shielding rate exceeds 75 % (λ < 380 nm). The structure of the bioplastic was revealed by SEM, XPS, and Raman spectroscopy. Directly dissolving lignocellulose in NMMO aqueous solution is expected to yield bioplastics with high strength and biodegradability. It is a potential substitute for petrochemical plastics and provides a possible way for the utilization of agricultural waste.

An overview on fermentation strategies to overcome lignocellulosic inhibitors in second-generation ethanol production using cell immobilization

The development of technologies to ferment carbohydrates (mainly glucose and xylose) obtained from the hydrolysis of lignocellulosic biomass for the production of second-generation ethanol (2G ethanol) has many economic and environmental advantages. The pretreatment step of this biomass is industrially performed mainly by steam explosion with diluted sulfuric acid and generates hydrolysates that contain inhibitory compounds for the metabolism of microorganisms, harming the next step of ethanol production. The main inhibitors are: organic acids, furan, and phenolics. Several strategies can be applied to decrease the action of these compounds in microorganisms, such as cell immobilization. Based on data published in the literature, this overview will address the relevant aspects of cell immobilization for the production of 2G ethanol, aiming to evaluate this method as a strategy for protecting microorganisms against inhibitors in different modes of operation for fermentation. This is the first overview to date that shows the relation between inhibitors, cells immobilization, and fermentation operation modes for 2G ethanol. In this sense, the state of the art regarding the main inhibitors in 2G ethanol and the most applied techniques for cell immobilization, besides batch, repeated batch and continuous fermentation using immobilized cells, in addition to co-culture immobilization and co-immobilization of enzymes, are presented in this work.

Current status of metabolic engineering of microorganisms for bioethanol production by effective utilization of pentose sugars of lignocellulosic biomass

Lignocellulosic biomass, consisting of homo- and heteropolymeric sugars, acts as a substrate for the generation of valuable biochemicals and biomaterials. The readily available hexoses are easily utilized by microbes due to the presence of transporters and native metabolic pathways. But, utilization of pentose sugar viz., xylose and arabinose are still challenging due to several reasons including (i) the absence of the particular native pathways and transporters, (ii) the presence of inhibitors, and (iii) lower uptake of pentose sugars. These challenges can be overcome by manipulating metabolic pathways/glycosidic enzymes cascade by using genetic engineering tools involving inverse-metabolic engineering, ex-vivo isomerization, Adaptive Laboratory Evolution, Directed Metabolic Engineering, etc. Metabolic engineering of bacteria and fungi for the utilization of pentose sugars for bioethanol production is the focus area of research in the current decade. This review outlines current approaches to biofuel development and strategies involved in the metabolic engineering of different microbes that can uptake pentose for bioethanol production.

Lignocellulosic Biomass-Based Carbon Dots: Synthesis Processes, Properties, and Applications

Carbon dots (CDs), a new type of carbon-based fluorescent nanomaterial, have attracted widespread attention because of their numerous excellent properties. Lignocellulosic biomass is the most abundant renewable natural resource and possesses broad potential to manufacture different composite and smart materials. Numerous studies have explored the potential of using the components (such as cellulose, hemicellulose, and lignin) in lignocellulosic biomass to produce CDs. There are few papers systemically aiming in the review of the state-of-the-art works related to lignocellulosic biomass-derived CDs. In this review, the significant advances in synthesis processes, formation mechanisms, structural characteristics, optical properties, and applications of lignocellulosic biomass-based CDs such as cellulose-based CDs, hemicellulose-based CDs and lignin-based CDs in latest research are reviewed. In addition, future research directions on the improvement of the synthesis technology of CDs using lignocellulosic biomass as raw materials to enhance the properties of CDs are proposed. This review will serve as a road map for scientists engaged in research and exploring more applications of CDs in different science fields to achieve the highest material performance goals of CDs.

Thermophilic Fungi as the Microbial Agents of Choice for the Industrial Co-Fermentation of Wood Wastes and Nitrogen-Rich Organic Wastes to Bio-Methane

The novel industrial approach of co-fermenting wood wastes with agricultural wastes that are rich in nitrogen such as animal manures to produce bio-methane (renewable natural gas) fuel via thermophilic anaerobic digestion mimics an analogous process occurring in lower termites, but it relies instead on thermophilic fungi along with other thermophilic microorganisms comprising suitable bacteria and archaea. Wood microbial hydrolysis under thermophilic temperatures (range of 55 °C to 70 °C) and aerobic or micro-aerobic conditions constitutes the first step of the two-step (hydrolysis and fermentation) dry thermophilic anaerobic digestion industrial process, designated as "W2M3+2", that relies on thermophilic fungi species, most of which grow naturally in wood piles. Eleven thermophilic fungi have been identified as likely agents of the industrial process, and their known growth habitats and conditions have been reviewed. Future research is proposed such that the optimal growth temperature of these thermophilic fungi could be increased to the higher thermophilic range approaching 70 °C, and a tolerance to partial anaerobic conditions can be obtained by modifying the fungal microbiome via a symbiotic existence with bacteria and/or viruses.

Production of Water-Soluble Carbohydrates from Aspen Wood Flour with Hydrogen Chloride Gas

The aim of this study was to optimize the reaction conditions for concentrated acid hydrolysis of aspen wood flour by employing anhydrous hydrogen chloride gas to produce fermentable sugars. Gas hydrolysis with HCl was conducted both with and without temperature control during hydrolysis under a relatively low pressure of 0.1 MPa. Process parameters for HCl gas hydrolysis included the moisture content of aspen wood flour (0.7-50%) and reaction time under pressure (30 min to 24 h). In addition, liquid-phase hydrolysis with concentrated hydrochloric acid was conducted in concentrations of 32-42% and 15 min to 24 h reaction times for comparison with the gas-phase process. The highest yields (>90%) for water-soluble carbohydrates from aspen wood flour were achieved with temperature-controlled gas hydrolysis using 50% moisture content and 2 h total reaction time, which is in line with the previous research and comparable to hydrolysis with concentrated (42%) hydrochloric acid.

Sugarcane: an unexpected habitat for black yeasts in Chaetothyriales

Sugarcane (Saccharum officinarum, Poaceae) is cultivated on a large scale in (sub)tropical regions such as Brazil and has considerable economic value for sugar and biofuel production. The plant is a rich substrate for endo- and epiphytic fungi. Black yeasts in the family Herpotrichiellaceae (Chaetothyriales) are colonizers of human-dominated habitats, particularly those rich in toxins and hydrocarbon pollutants, and may cause severe infections in susceptible human hosts. The present study assessed the diversity of Herpotrichiellaceae associated with sugarcane, using in silico identification and selective isolation. Using metagenomics, we identified 5833 fungal sequences, while 639 black yeast-like isolates were recovered in vitro. In both strategies, the latter fungi were identified as members of the genera Cladophialophora, Exophiala, and Rhinocladiella (Herpotrichiellaceae), Cyphellophora (Cyphellophoraceae), and Knufia (Trichomeriaceae). In addition, we discovered new species of Cladophialophora and Exophiala from sugarcane and its rhizosphere. The first environmental isolation of Cladophialophora bantiana is particularly noteworthy, because this species up to now is exclusively known from the human host where it mostly causes fatal brain disease in otherwise healthy patients.

A combined liquid chromatography - trapped ion mobility - tandem high-resolution mass spectrometry and multivariate analysis approach for the determination of enzymatic reactivity descriptors in biomass hydrolysates

Intermediate products such as oxygenated compounds may interfere with bioconversion kinetics of lignocellulosic biomass into bioethanol. This work presents a multidimensional approach, based on liquid chromatography (LC), trapped ion mobility spectrometry (TIMS), tandem high-resolution mass spectrometry (HRMS/MS), and multivariate analysis, for the identification of enzymatic reactivity descriptors in 22 industrial biomass samples, called hydrolysates. The first part of the study is dedicated to the improvement of the chemical diversity assessment of the hydrolysates through an original three-dimensional Van Krevelen diagram displaying the double bond equivalent (DBE) as third dimension. In a second part, the evaluation of data by multivariate data analysis allowed the discrimination of sample according to the biomass type and the level of enzymatic reactivity. In the last part, a potential descriptor of low enzymatic reactivity was selected and used in a case study. An in-depth structural analysis was performed on the feature annotated as carbohydrate derivative. Considering the intricate fragmentation spectrum exhibited by the selected feature, trapped ion mobility was employed to enhance separation prior to the HRMS/MS experiments. This final step improved data interpretation and increased the identification confidence level leading to the characterization of xylotriose, 3,5-dimethoxy-4-hydroxybenzaldehyde and 4-hydroxy-3-methoxy-cinnamaldehyde. This is the first study to present an untargeted multidimensional approach for the identification of enzymatic hydrolysis inhibitors in industrial hydrolysate samples.

Biopreservative technologies of food: an alternative to chemical preservation and recent developments

Despite centuries of developing strategies to prevent food-associated illnesses, food safety remains a significant concern, even with multiple technological advancements. Consumers increasingly seek less processed and naturally preserved food options. One promising approach is food biopreservation, which uses natural antimicrobials found in food with a long history of safe consumption and can help reduce the reliance on chemically synthesized food preservatives. The hurdle technology method that combines multiple antimicrobial strategies is often used to improve the effectiveness of food biopreservation. This review attempts to provide a research summary on the utilization of lactic acid bacteria, bacteriocins, endolysins, bacteriophages, and biopolymers helps in the improvement of the shelf-life of food and lower the risk of food-borne pathogens throughout the food supply chain. This review also aims to evaluate current technologies that successfully employ the aforementioned preservatives to address obstacles in food biopreservation.

From purposeless residues to biocomposites: A hyphae made connection

Biocomposites create attractive alternatives to match packing needs with available agricultural residues. Growing native fungal strains developed a mycelium biocomposite over a mixture of Peach Palm Fruit Peel Flour and Sugar Cane Bagasse Wet Dust. A methodology was proposed to analyze their main characteristics: 1) morphological, 2) chemical, and 3) biodegradability. 1) SEM analysis evidenced the structural change of the dried vs pressed material and mycelium morphology for both species. 2) The ratio lignin:carbohydrate showed that P. ostreatus degrades the cellulose-hemicellulose fraction of the substrate at a higher rate than T. elegans, and 3) the curve BMP indicated that these materials are readily biodegradable with a maximum yield of 362,50 mL biogas/g VS. An innovative tangible valorization strategy based on mass balances is also presented: from just 50 kg of peel flour, up to 1840 units can be manufactured, which could pave the way for a more sustainable future.

Development of bioenergy technologies: A scientometric analysis

Bioenergy has the potential to substitute the current demand for fossil fuels in various applications. Recovering energy from bio-based materials due to environmental considerations has been adopted as a policy objective by governments and international organizations, which led to both vast financial investment and scientific research, especially in the last two decades. So far, various feedstocks and technologies have been scrutinised by the research community, although not all of them are commercially adopted due to sustainability considerations. This study employs scientometric analysis to survey the progress of scientific development in the field of bioenergy from 1966 to 2022, using ten parameters including publication year, type of document, categories, countries, affiliations, document citations, co-authorship, author citation networks, journal citation networks, and keywords. A total of 51,905 scientific documents were collected from the Web of Science, involving more than 96,000 authors from 162 countries. The dispersion of studies followed an ascending distribution with a sharp increase in the second half of the 2000s. The evolution of keywords in terms of burst strength confirmed the advancements of technologies from primary first-generation to advanced fourth-generation bioenergies. Based on the evolution of science in this area, it is concluded that integrated sustainability assessment studies, covering technical, economical, environmental, and social aspects, are needed to bridge the gap between abundant theoretical endeavours and limited commercial use of this energy source.

Aromaticity, polarity, and longevity of biochar derived from disposable bamboo chopsticks waste for environmental application

Transforming disposable bamboo chopstick (DBC) wastes into biochar is an effective way to achieve waste-to-resource conversion. This research focused on the elemental and chemical composition of biochar and revealed how these properties affect biochar performance in real-world applications, particularly with respect to climate change mitigation. This research is aimed at examining the effect of pyrolysis temperature on the aromaticity, polarity, and longevity of DBC biochar. The DBC feedstock was pyrolyzed at different temperatures of 400 °C, 450 °C, 500 °C, and 550 °C with a holding time of 20 min at a constant heating rate of 20 °C min-1. The chemical composition, including carbon (C), hydrogen (H), nitrogen (N), oxygen (O), volatile matter (VM), ash, and fixed carbon (FC) contents, were analyzed. The aromaticity, polarity, and longevity of biochar are presented by the atomic ratios of H/C, O/C, (O + N)/C, and C/N, and these ratios are used to determine the potential of biochar for use in climate change mitigation applications. The findings demonstrated that DBC biochar produced at various pyrolysis temperatures contained C contents ranging from 77.54% to 88.06%, ash contents ranging from 2.62% to 2.99%, and a half-life of over 1000 years (O/C < 0.2). Pyrolysis temperature significantly affected biochar properties, as supported by the results for the FC/ash ratio (>10); the ash, FC, C, and N contents increased with increasing temperature; in contrast, the VM, H, and O contents decreased. The results revealed that DBC wastes are the potential feedstock to produce good-quality biochar that could be applied for environmental purposes. Furthermore, the research demonstrated that the best-performing DBC biochar was produced at 500 °C, which had the highest C content, aromaticity, and longevity and the lowest polarity as represented by the values of O/C, H/C, and (O + N)/C, and this biochar could be applied for climate change mitigation purposes.

Comparative Analysis of Trifluoracetic Acid Pretreatment for Lignocellulosic Materials

Lignocellulosic materials are usually processed toward C5 and C6 corresponding sugars. Trifluoroacetic acid (TFA) is a pretreatment method to solubilize hemicellulose to sugars such xylose without degrading cellulose. However, this pretreatment has not been compared to other processes. Thus, this paper focuses on the techno-economic comparison of the C5-C6 production of C5-C6 as raw materials platforms using non-centrifuged sugarcane bagasse (NCSB) and Pinus patula wood chips (PP). Hydrolysates using TFA 2.5 M as an acid were characterized through HPLC regarding arabinose, galactose glucose, xylose, and mannose sugars. Then, simulations of the processes according to the experimental results were done. The economic assessment was performed, and compared with some common pretreatments. The mass and energy balances of the simulations indicate that the process can be compared with other pretreatments. From the economic perspective, the main operating expenditures (OpEx) are related to raw materials and capital depreciation due to the cost of TFA corrosion issues. The processes showed a CapEx and OpEx of 0.99 MUSD and 6.59 M-USD/year for NCSB, and 0.97 MUSD and 4.37 MUSD/year for PP, considering a small-scale base (1 ton/h). TFA pretreatment is innovative and promising from a techno-economic perspective.