Synthesis of highly crystalline and monodisperse maghemite nanocrystallites without a size-selection process

Controlled assembly of superparamagnetic iron oxide nanoparticle into nanoliposome for Pickering emulsion preparation

There has been a surge in effort in the development of various solid nanoparticles as Pickering emulsion stabilizers in the past decades. Regardless, the exploration of stabilizers that simultaneously stabilize and deliver bioactive has been limited. For this, liposomes with amphiphilic nature have been introduced as Pickering emulsion stabilizers but these nano-sized vesicles lack targeting specificity. Therefore in this study, superparamagnetic iron oxide nanoparticles (SPION) encapsulated within liposomes (MLP) were used as Pickering emulsion stabilizers to prepare pH and magnetic-responsive Pickering emulsions. A stable MLP-stabilized Pickering emulsion formulation was established by varying the MLP pH, concentration, and oil loading during the emulsification process. The primary stabilization mechanism of the emulsion under pH variation was identified to be largely associated with the MLP phosphate group deprotonation. When subjected to sequential pH adjustment to imitate the gastrointestinal digestion pH environment, a recovery in Pickering emulsion integrity was observed as the pH changes from acidic to alkaline. By incorporating SPION, the Pickering emulsion can be guided to the targeted site under the influence of a magnetic field without compromising emulsion stability. Overall, the results demonstrated the potential of MLP-stabilized Pickering emulsion as a dual pH- and magnetic-responsive drug delivery carrier with the ability to co-encapsulate hydrophobic and hydrophilic bioactive.

Degenerately doped metal oxide nanocrystals for infrared light harvesting: insight into their plasmonic properties and future perspectives

The tuneability of the localized surface plasmon resonance (LSPR) of degenerately doped metal oxide (MOX) nanocrystals (NCs) over a wide range of the infrared (IR) region by controlling NC size and doping content offers a unique opportunity to develop a future generation of optoelectronic and photonic devices like IR photodetectors and sensors. The central aim of this review article is to highlight the distinctive and remarkable plasmonic properties of degenerately or heavily doped MOX nanocrystals by reviewing the comprehensive literature reported so far. In particular, the literature of each MOX NC, i.e. ZnO, CdO, In2O3, and WO3 doped with different dopants, is discussed separately. In addition to discussion of the most commonly used colloidal synthesis approaches, the ultrafast dynamics of charge carriers in NCs and the extraction of LSPR-assisted hot-carriers are also discussed in detail. Finally, future prospective applications of MOX NCs in IR photodetectors and photovoltaic (PV) self-powered chemical sensors are also presented.

Advances in functionalization and conjugation mechanisms of dendrimers with iron oxide magnetic nanoparticles

Iron oxide magnetic nanoparticles (MNPs) are crucial in various areas due to their unique magnetic properties. However, their practical use is often limited by instability and aggregation in aqueous solutions. This review explores the advanced technique of dendrimer functionalization to enhance MNP stability and expand their application potential. Dendrimers, with their symmetric and highly branched structure, effectively stabilize MNPs and provide tailored functional sites for specific applications. We summarize key synthetic modifications, focusing on the impacts of dendrimer size, surface chemistry, and the balance of chemical (e.g., coordination, anchoring) and physical (e.g., electrostatic, hydrophobic) interactions on nanocomposite properties. Current challenges such as dendrimer toxicity, control over dendrimer distribution on MNPs, and the need for biocompatibility are discussed, alongside potential solutions involving advanced characterization techniques. This review highlights significant opportunities in environmental, biomedical, and water treatment applications, stressing the necessity for ongoing research to fully leverage dendrimer-functionalized MNPs. Insights offered here aim to guide further development and application of these promising nanocomposites.

Langmuir-Blodgett Transfer of Nanocrystal Monolayers: Layer Compaction, Layer Compression, and Lattice Stretching of the Transferred Layer

Grazing incidence small angle X-ray scattering (GISAXS) was used to study the structure and interparticle spacing of monolayers of organic ligand-stabilized iron oxide nanocrystals floating at the air-water interface on a Langmuir trough, and after transfer to a solid support via the Langmuir-Blodgett technique. GISAXS measurements of the nanocrystal arrangement at the air-water interface showed that lateral compression decreased the interparticle spacing of continuous films. GISAXS also revealed that Langmuir-Blodgett transfer of the nanocrystal layers to a silicon substrate led to a stretching of the film, with a significant increase in interparticle spacing.

Toxicity and magnetometry evaluation of the uptake of core-shell maghemite-silica nanoparticles by neuroblastoma cells

Nanoparticle uptake by cells is a key parameter in their performance in biomedical applications. However, the use of quantitative, non-destructive techniques to obtain the amount of nanoparticles internalized by cells is still uncommon. We have studied the cellular uptake and the toxicity of core-shell maghemite-silica magnetic nanoparticles (MNPs), with a core diameter of 9 nm and a shell thickness of 3 nm. The internalization of the nanoparticles by mouse neuroblastoma 2a cells was evaluated by sensitive and non-destructive Superconducting Quantum Interference Device (SQUID) magnetometry and corroborated by graphite furnace atomic absorption spectroscopy. We were thus able to study the toxicity of the nanoparticles for well-quantified MNP uptake in terms of nanoparticle density within the cell. No significant variation in cell viability or growth rate was detected for any tested exposure. Yet, an increase in both the amount of mitochondrial superoxide and in the lysosomal activity was detected for the highest concentration (100 μg ml-1) and incubation time (24 h), suggesting the onset of a disruption in ROS homeostasis, which may lead to an impairment in antioxidant responses. Our results validate SQUID magnetometry as a sensitive technique to quantify MNP uptake and demonstrate the non-toxic nature of these core-shell MNPs under our culture conditions.

Enhancing Multifunctionality: Optimal Properties of Iron-Oxide-Reinforced Polyvinylidene Difluoride Unveiled Through Full Atom Molecular Dynamics Simulations

Nanocomposites made of magnetite (Fe3O4) nanoparticles (NP)s with different surface chemistry and polyvinyl difluoride (PVDF) polymer were investigated using full atom molecular dynamics (MD) simulation. NPs with hydroxyl (OH), hexanoic, and oleic acid terminations were considered in this study. The effect of each surface chemistry was investigated in terms of the mechanical properties, the distribution of the internal energy around the NP, and the chain polarization gradient from the interface to the bulk. From this investigation, we find that oleic acid termination, although the most popular, is less favorable for interfacial interaction and local polarization. The OH-terminated NP results in the best configuration for the properties investigated. The hexanoic acid-grafted NP presents a good compromise. Hydrogen bonding governs the induced response of the nanocomposites. Although the hexanoic acid grafted NP presents less hydrogen bonding than the OH-terminated case, the conformation of the hexanoic acid acts as a mobility flow inhibitor, leading to a performance comparable to that of the OH-terminated NP composite. This work led to investigating routes to make nanocomposite materials with optimized properties. These results shed light on the multiple combinations offered by nanocomposites that go beyond the conventional effects of size.

Boron Nitride Nanosheet-Magnetic Nanoparticle Composites for Water Remediation Applications

The combination of 0D nanoparticles with 2D nanomaterials has attracted a lot of attention over the last years due to the unique multimodal properties of resulting 0D-2D nanocomposites. In this work, we developed boron nitride nanosheets (BNNS) functionalized with manganese ferrite magnetic nanoparticles (MNPs). The functionalization process involved attachment of MNPs to exfoliated BNNS by refluxing the precursor materials in a polyol medium. Characterization of the produced BNNS-MNP composites was carried out using powder X-ray diffraction, transmission electron microscopy, vibrating sample magnetometry, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. The adhesion of MnFe2O4 magnetic nanoparticles onto the BNNS remained unaffected by repeated sonication and heating in a furnace at 400 °C, underscoring the robust nature of the formed bond. FTIR spectra and XPS deconvolution confirmed the presence of strong bonding between BNNS and the MNPs. Membranes were fabricated from the BNNS and the BNNS-MnFe2O4 nanocomposites for evaluating their efficiency in removing the methylene blue dye pollutant. The membranes have been characterized by scanning electron microscopy, Brunauer-Emmett-Teller surface area analysis, and mercury intrusion porosimetry. The effectiveness of dye removal was monitored using ultraviolet-visible spectroscopy. The BNNS-MnFe2O4 nanocomposite membranes exhibited enhanced MB capture compared to membranes made from pure BNNS alone. The recyclability assessment of BNNS-MnFe2O4 demonstrated exceptional performance, retaining 92% efficiency even after eight cycles. These results clearly demonstrate the high potential of these magnetic nanocomposites as reusable materials for water filtration membranes. Furthermore, the introduction of magnetic functionality as part of the membrane brings an exciting opportunity for in situ magnetic heating of the membrane, which shall be explored in future work.

Iron oxide magnetic aggregates: Aspects of synthesis, computational approaches and applications

Superparamagnetic magnetite nanoparticles have been central to numerous investigations in the past few decades for their use in many applications, such as drug delivery, medical diagnostics, magnetic separation, and material science. However, the properties of single magnetic nanoparticles are sometimes not sufficient to accomplish tasks where a strong magnetic response is required. In light of this, aggregated magnetite nanoparticles have been proposed as an alternative advanced material, which may expand and combine some of the advantages of single magnetic nanoparticles, including superparamagnetism, with an enhanced magnetic moment and increased colloidal stability. This review comprehensively discusses the current literature on aggregates made of magnetic iron oxide nanoparticles. This review is divided into three sections. First, the current synthetic strategies for magnetite nanoparticle aggregates are discussed, together with the influence of different stabilizers on the primary crystals and the final aggregate size and morphology. The second section is dedicated to computational approaches, such as density functional methods (which permit accurate predictions of electronic and magnetic properties and shed light on the behavior of surfactant molecules on iron oxide surfaces) and molecular dynamics simulations (which provide additional insight into the influence of ligands on the surface chemistry of iron oxide nanocrystals). The last section discusses current and possible future applications of iron oxide magnetic aggregates, including wastewater treatment, water purification, medical applications, and magnetic aggregates for materials displaying structural colors.

Emergence of magnetic nanoparticles in photothermal and ferroptotic therapies

With their distinctive physicochemical features, nanoparticles have gained recognition as effective multifunctional tools for biomedical applications, with designs and compositions tailored for specific uses. Notably, magnetic nanoparticles stand out as first-in-class examples of multiple modalities provided by the iron-based composition. They have long been exploited as contrast agents for magnetic resonance imaging (MRI) or as anti-cancer agents generating therapeutic hyperthermia through high-frequency magnetic field application, known as magnetic hyperthermia (MHT). This review focuses on two more recent applications in oncology using iron-based nanomaterials: photothermal therapy (PTT) and ferroptosis. In PTT, the iron oxide core responds to a near-infrared (NIR) excitation and generates heat in its surrounding area, rivaling the efficiency of plasmonic gold-standard nanoparticles. This opens up the possibility of a dual MHT + PTT approach using a single nanomaterial. Moreover, the iron composition of magnetic nanoparticles can be harnessed as a chemotherapeutic asset. Degradation in the intracellular environment triggers the release of iron ions, which can stimulate the production of reactive oxygen species (ROS) and induce cancer cell death through ferroptosis. Consequently, this review emphasizes these emerging physical and chemical approaches for anti-cancer therapy facilitated by magnetic nanoparticles, combining all-in-one functionalities.

Magnetically Controlled Hyaluronic Acid-Maghemite Nanocomposites with Embedded Doxorubicin

The controllable delivery of drugs is a key task of pharmacology. For this purpose, a series of polymer composites was synthesized via the cross-linking of hyaluronate and a hyaluronate/polyacrylate mixture with Fe2O3 nanoparticles. The cross-linking imparts magnetic properties to the composites, which are more pronounced for the ternary hyaluronate/polyacrylate/γ-Fe2O3 composites compared with the binary hyaluronate/Fe2O3 composites. When dispersed in water, the composites produce microsized hydrogel particles. Circulation of the ternary microgels in an aqueous solution at a speed of 1.84 cm/s can be stopped using a permanent external magnet with a magnetic flux density of 400 T. The composite hydrogels can absorb the antitumor antibiotic doxorubicin (Dox); the resulting constructs show their cytotoxicity to tumor cells to be comparable to the cytotoxicity of Dox itself. The addition of the hyaluronidase enzyme induces degradation of the binary and ternary microgels down to smaller particles. This study presents prospectives for the preparation of magnetically controlled biodegradable polymer carriers for the encapsulation of bioactive substances.

Magnetic Bead Spherical Nucleic Acid Microstructure for Reliable DNA Preservation and Repeated DNA Reading

DNA is an attractive medium for long-term data storage because of its density, ease of copying, sustainability, and longevity. Recent advances have focused on the development of new encoding algorithms, automation, and sequencing technologies. Despite progress in these subareas, the most challenging hurdle in the deployment of DNA storage remains the reliability of preservation and the repeatability of reading. Herein, we report the construction of a magnetic bead spherical nucleic acid (MB-SNA) composite microstructure and its use as a cost-effective platform for reliable DNA preservation and repeated reading. MB-SNA has an inner core of silica@γ-Fe2O3@silica microbeads and an outer spherical shell of double-stranded DNA (dsDNA) with a density as high as 34 pmol/cm2. For MB-SNA, each strand of dsDNA stored a piece of data, and the high-density packing of dsDNA achieved high-capacity storage. MB-SNA was advantageous in terms of reliable preservation over free DNA. By accelerated aging tests, the data of MB-SNA is demonstrated to be readable after 0.23 million years of preservation at -18 °C and 50% relative humidity. Moreover, MB-SNA facilitated repeated reading by facile PCR-magnetic separation. After 10 cycles of PCR access, the retention rate of dsDNA for MB-SNA is demonstrated to be as high as 93%, and the accuracy of sequencing is more than 98%. In addition, MB-SNA makes cost-effective DNA storage feasible. By serial dilution, the physical limit for MB-SNA to achieve accurate reading is probed to be as low as two microstructures.

Boron Nitride Nanosheets Functionalized with Fe3O4 and CoFe2O4 Magnetic Nanoparticles for Nanofiltration Applications

Nanofiltration (NF) is one of the emerging technologies that is very promising for water purification among many other applications. 2D boron nitride (BN) based nanomaterials are excellent building blocks for NF membranes. In our work, BN nanosheets (BNNS) have been functionalized with magnetic nanoparticles (MNPs) to form BNNS-MNP nanocomposites. It was found that the nanocomposites are stable with the MNPs giving very good coverage with both magnetite and cobalt ferrite MNPs and showing good attachment and stability to sonication. These nanocomposites have been tested for removal of methylene blue (MB) dye and MNPs from water. BNNS-magnetite nanocomposites showed higher removal efficiency of the MB from water than the corresponding pure BNNS, while the BNNS-cobalt ferrite removal efficiency was slightly less than the pure BNNS. The BNNS-cobalt ferrite material was regenerated by burning off the MB and recycled to show the recyclability of this material. The BNNS membranes were tested for filtration of 14 ± 4 nm magnetite MNPs and were found to capture 100% of the nanoparticles with no MNPs left in the filtrate. Thus, we have developed magnetic nanocomposite membranes, which have demonstrated great potential for water remediation. We believe that this research opens up promising ways for production of 2D nanocomposite materials with multiple applications.

Magnetization of amorphous FeOOH chrysanthemum-like nanosheets under ambient conditions

The conversion of paramagnetic solid iron oxides to magnetic iron oxides has drawn considerable interest, but it's still challenging to carry out without heat treatment or irradiation. In this work, solid amorphous iron oxide chrysanthemum-like nanosheets synthesized by a smart redox strategy at the interface of a soap-free emulsion are magnetized at room temperature and under ambient pressure. An amorphous FeOOH hollow shell with needles towards water is produced by the reaction of cumyl hydroperoxide (CHPO) and iron(II) sulfate (FeSO₄) at the interface of the emulsion generated by ultrasound and torn up into chrysanthemum-like nanosheets simultaneously. With the presence of noble metal ions, such as Au³⁺, the magnetization of the nanosheets was carried out as soon as sodium borohydride (NaBH₄) was introduced into the dispersion. The magnetic chrysanthemum-like nanosheets present saturation magnetization (Ms) of 32 emu g^-1 and can be placed linearly in a magnetic field.

Synthesis, Assembly, and Applications of Magic-Sized Semiconductor (CdSe)13 Cluster

ConspectusAtomically precise metal chalcogenide clusters (MCCs) are model molecular compounds of scientifically and technologically important semiconductor nanocrystals, which are known as quantum dots (QDs). The significantly high ambient stability of MCCs of particular sizes, as compared to that of slightly smaller or larger sizes, made them be termed "magic-sized clusters" (MSCs). In other words, MSCs with specific sizes between sizes of precursors (typically, metal-ligand complexes) and nanocrystals (typically, QDs) appear sequentially during the colloidal synthesis of nanocrystals, while the other cluster species decompose to precursor monomers or are consumed during the growth of the nanocrystals. Unlike nanocrystals with an ambiguous atomic-level structure and a substantial size distribution, MSCs possess atomically monodisperse size, composition, and distinct atomic arrangement. Chemical synthesis and exploration of properties of MSCs are of great significance since they help systematically understand the evolution of fundamental properties as well as build structure-activity relationships at distinct molecular levels. Furthermore, MSCs are anticipated to offer atomic-level insights into the growth mechanism of the semiconductor nanocrystals, which is highly desirable in the design of advanced materials with new functions. In this Account, we cover our recent efforts in the advancement of one of the most important stoichiometric CdSe MSCs, (CdSe)₁₃. In particular, we present its molecular structure derived from a single crystal X-ray crystallographic study of the closest MSC, Cd₁₄Se₁₃. The crystal structure of MSC enables not only the understanding of the electronic structure and prediction of the potential sites for heteroatom dopants (e.g., Mn²⁺ and Co²⁺) but also the identification of favorable synthetic conditions for the selective synthesis of desired MSCs. Next, we focus on enhancing the photoluminescence quantum yield and stability of Mn²⁺ doped (CdSe)₁₃ MSCs through their self-assembly, which is facilitated by the rigid diamines. In addition, we show how atomic-level synergistic effects and functional groups of the assemblies of alloy MSCs can be utilized for a highly enhanced catalytic CO₂ fixation with epoxides. Benefiting from the intermediate stability, the MSCs are explored as single-source precursors to low-dimensional nanostructures, such as nanoribbons and nanoplatelets, through the controlled transformation. Distinct differences in the outcome of the solid-state and colloidal-state conversion of MSCs suggest the need for careful consideration of the phase and reactivity of MSCs as well as the type of dopant to achieve novel structured multicomponent semiconductors. Finally, we summarize the Account and provide future perspectives on the fundamental and applied scientific research of MSCs.

Anisotropic Heavy-Metal-Free Semiconductor Nanocrystals: Synthesis, Properties, and Applications

Heavy-metal (Cd, Hg, and Pb)-containing semiconductor nanocrystals (NCs) have been explored widely due to their unique optical and electrical properties. However, the toxicity risks of heavy metals can be a drawback of heavy-metal-containing NCs in some applications. Anisotropic heavy-metal-free semiconductor NCs are desirable replacements and can be realized following the establishment of anisotropic growth mechanisms. These anisotropic heavy-metal-free semiconductor NCs can possess lower toxicity risks, while still exhibiting unique optical and electrical properties originating from both the morphological and compositional anisotropy. As a result, they are promising light-emitting materials in use various applications. In this review, we provide an overview on the syntheses, properties, and applications of anisotropic heavy-metal-free semiconductor NCs. In the first section, we discuss hazards of heavy metals and introduce the typical heavy-metal-containing and heavy-metal-free NCs. In the next section, we discuss anisotropic growth mechanisms, including solution-liquid-solid (SLS), oriented attachment, ripening, templated-assisted growth, and others. We discuss mechanisms leading both to morphological anisotropy and to compositional anisotropy. Examples of morphological anisotropy include growth of nanorods (NRs)/nanowires (NWs), nanotubes, nanoplatelets (NPLs)/nanosheets, nanocubes, and branched structures. Examples of compositional anisotropy, including heterostructures and core/shell structures, are summarized. Third, we provide insights into the properties of anisotropic heavy-metal-free NCs including optical polarization, fast electron transfer, localized surface plasmon resonances (LSPR), and so on, which originate from the NCs' anisotropic morphologies and compositions. Finally, we summarize some applications of anisotropic heavy-metal-free NCs including catalysis, solar cells, photodetectors, lighting-emitting diodes (LEDs), and biological applications. Despite the huge progress on the syntheses and applications of anisotropic heavy-metal-free NCs, some issues still exist in the novel anisotropic heavy-metal-free NCs and the corresponding energy conversion applications. Therefore, we also discuss the challenges of this field and provide possible solutions to tackle these challenges in the future.

Recent advances in development of functional magnetic adsorbents for selective separation of proteins/peptides

Nowadays, proteins separation has attracted great attention in proteomics research. Because the proteins separation is helpful for making an early diagnosis of many diseases. Magnetic nanoparticles are an interesting and useful functional material, and have attracted extensive research interest during the past decades. Because of the excellent properties such as easy surface functionalization, tunable biocompatibility, high saturation magnetization etc, magnetic microspheres have been widely used in isolation of proteins/peptides. Notably, with the rapid development of surface decoration strategies, more and more functional magnetic adsorbents have been designed and fabricated to meet the growing demands of biological separation. In this review, we have collected recent information about magnetic adsorbents applications in selective separation of proteins/peptides. Furthermore, we present a comprehensive prospects and challenges in the field of protein separation relying on magnetic nanoparticles.

A review on the effectiveness of nanocomposites for the treatment and recovery of oil spill

The introduction of unintended oil spills into the marine ecosystem has a significant impact on aquatic life and raises important environmental concerns. The present review summarizes the recent studies where nanocomposites are applied to treat oil spills. The review deals with the techniques used to fabricate nanocomposites and identify the characteristics of nanocomposites beneficial for efficient recovery and treatment of oil spills. It classifies the nanocomposites into four categories, namely bio-based materials, polymeric materials, inorganic-inorganic nanocomposites, and carbon-based nanocomposites, and provides an insight into understanding the interactions of these nanocomposites with different types of oils. Among nanocomposites, bio-based nanocomposites are the most cost-effective and environmentally friendly. The grafting or modification of magnetic nanoparticles with polymers or other organic materials is preferred to avoid oxidation in wet conditions. The method of synthesizing magnetic nanocomposites and functionalization polymer is essential as it influences saturation magnetization. Notably, the inorganic polymer-based nanocomposite is very less developed and studied for oil spill treatment. Also, the review covers some practical considerations for treating oil spills with nanocomposites. Finally, some aspects of future developments are discussed. The terms "Environmentally friendly," "cost-effective," and "low cost" are often used, but most of the studies lack a critical analysis of the cost and environmental damage caused by chemical alteration techniques. However, the oil and gas industry will considerably benefit from the stimulation of ideas and scientific discoveries in this field.

A Simplified and Efficient Method for Production of Manganese Ferrite Magnetic Nanoparticles and Their Application in DNA Isolation

A simplified, fast, and effective production method has been developed for the synthesis of manganese ferrite (MnFe₂O₄) magnetic nanoparticles (MNPs). In addition to the wide applicability of MnFe₂O₄ MNPs, this work also reports their application in DNA isolation for the first time. An ultrasonic-cavitation-assisted combustion method was applied in the synthesis of MnFe₂O₄ MNPs at different furnace temperatures (573 K, 623 K, 673 K, and 773 K) to optimize the particles' properties. It was shown that MnFe₂O₄ nanoparticles synthesized at 573 K consist of a spinel phase only with adequate size and zeta potential distributions and superparamagnetic properties. It was also demonstrated that superparamagnetic manganese ferrite nanoparticles bind DNA in buffer with a high NaCl concentration (2.5 M), and the DNA desorbs from the MNPs by decreasing the NaCl concentration of the elution buffer. This resulted in a DNA yield comparable to that of commercial DNA extraction products. Both the DNA concentration measurements and electrophoresis confirmed that a high amount of isolated bacterial plasmid DNA (pDNA) with adequate purity can be extracted with MnFe₂O₄ (573 K) nanoparticles by applying the DNA extraction method proposed in this article.

The valence state of iron-based nanomaterials determines the ferroptosis potential in a zebrafish model

Many nanomaterials containing different valences of iron have been designed for applications in biomedicine, energy, catalyzers, nanoenzymes, and so on. However, the toxic effects of the valence state of iron in iron-based nanomaterials are still unclear. Here, three different-valence iron-based nanomaterials (nFe@Fe₃O₄, nFe₃O₄ and nFe₂O₃) were synthesized and exposed to zebrafish embryos and mammalian cardiomyocytes. All of them induced ferroptosis along with an increase in valence through iron overload and the Fenton reaction. Specifically, we exposed Tg (cmlc2:EGFP) zebrafish to the three iron-based nanomaterials and found that nFe@Fe₃O₄ treatments led to enlarged ventricles, while nFe₃O₄ and nFe₂O₃ increased atrial size, which was consistent with the results from hematoxylin-eosin staining and in situ hybridization. Moreover, we used ferroptosis inhibitors (ferrostatin-1 or deferoxamine) to treat zebrafish along with nanoparticles exposure and found that the cardiac developmental defects caused by nFe₃O₄ and nFe₂O₃, but not nFe@Fe₃O₄, could be completely rescued by ferroptosis inhibitors. We further found that nFe@Fe₃O₄, rather than nFe₃O₄ and nFe₂O₃, reduced the dissolved oxygen in the medium, which resulted in hypoxia and acceleration of heart tube formation and ventricular enlargement, and both were fully rescued by oxygen donors combined with ferroptosis inhibitors. Consistently, these findings were also observed in mammalian cardiomyocytes. In summary, our study demonstrates that the valence state of iron-based nanomaterials determines the ferroptosis potential. Our study also clarifies that high-valence iron-based nanomaterials induce an enlarged atrium via ferroptosis, while low-valence ones increase the ventricular size through both hypoxia and ferroptosis, which is helpful to understand the potential adverse effects of different valences of iron-based nanomaterials on environmental health and assure the responsible and sustainable development of nanotechnology.

Atomically flat semiconductor nanoplatelets for light-emitting applications

The last decade has witnessed extensive breakthroughs and significant progress in atomically flat two-dimensional (2D) semiconductor nanoplatelets (NPLs) in terms of synthesis, growth mechanisms, optical and electronic properties and practical applications. Such NPLs have electronic structures similar to those of quantum wells in which excitons are predominantly confined along the vertical direction, while electrons are free to move in the lateral directions, resulting in unique optical properties, such as extremely narrow emission line width, short photoluminescence (PL) lifetime, high gain coefficient, and giant oscillator strength transition (GOST). These unique optical properties make NPLs favorable for high color purity light-emitting applications, in particular in light-emitting diodes (LEDs), backlights for liquid crystal displays (LCDs) and lasers. This review article first introduces the intrinsic characteristics of 2D semiconductor NPLs with atomic flatness. Subsequently, the approaches and mechanisms for the controlled synthesis of atomically flat NPLs are summarized followed by an insight on recent progress in the mediation of core/shell, core/crown and core/crown@shell structures by selective epitaxial growth of passivation layers on different planes of NPLs. Moreover, an overview of the unique optical properties and the associated light-emitting applications is elaborated. Despite great progress in this research field, there are some issues relating to heavy metal elements such as Cd²⁺ in NPLs, and the ambiguous gain mechanisms of NPLs and others are the main obstacles that prevent NPLs from widespread applications. Therefore, a perspective is included at the end of this review article, in which the current challenges in this stimulating research field are discussed and possible solutions to tackle these challenges are proposed.

MnFe2O4@SiO2@CeO2 core–shell nanostructures for applications in water remediation†

Removal of dye pollutants from wastewater is among the most important emerging needs in environmental science and engineering. The main objective of our work is to develop new magnetic core–shell nanostructures and explore their use for potential removal of pollutants from water using an external magnetic field. Herein, we have prepared magnetic core–shell nanoparticles that demonstrated excellent dye pollutant adsorbent properties. These nanoparticles are composed of a manganese ferrite magnetic core coated with silica, to protect the core and enable further functionalisation, then finally coated with ceria, which is shown to be an effective adsorbent. The magnetic core–shell nanostructures have been synthesized by a modification of solvothermal synthesis. The nanoparticles were fully characterised at each stage of the synthesis by powder X-ray diffraction (pXRD), transmission electron microscopy (TEM), vibrating sample magnetometry (VSM) and Fourier transform infrared spectroscopy (FTIR). These particles were found to be effective in removing methylene blue (MB) dye from water, which was validated by UV-visible (UV-vis) spectroscopy. These particles can be quickly removed from solution using a permanent magnet and then can be recycled after being placed in the furnace at 400 °C to burn off any organic residues. The particles were found to retain their ability to adsorb the pollutant after several cycles and TEM images of the particles after several cycles showed no change in the morphology. This research demonstrated the capacity of magnetic core–shell nanostructures to be used for water remediation.

Magnetic core–shell nanoparticles have been synthesised, characterised and used for methylene blue dye removal from water. They can be magnetically extracted and show no reduction in efficiency after several cycles.

Magnetic nanofluids (Ferrofluids): Recent advances, applications, challenges, and future directions

Impelled by the need to find solutions to new challenges of modern technologies new materials with unique properties are being explored. Among various new materials that emerged over the decades, magnetic fluids exhibiting interesting physiochemical properties (optical, thermal, magnetic, rheological, apparent density, etc.) under a magnetic stimulus have been at the forefront of research. In the initial phase, there has been a fervent scientific curiosity to understand the field-induced intriguing properties of such fluids but later a plethora of technological applications emerged. Magnetic nanofluid, popularly known as ferrofluid, is a colloidal suspension of fine magnetic nanoparticles, has been at the forefront of research because of its magnetically tunable physicochemical properties and applications. Due to their stimuli-responsive behaviour, they have been finding more applications in biology and other engineering disciplines in recent years. Therefore, a critical review of this topic highlighting the necessary background, the potential of this material for emerging technologies, and the latest developments is warranted. This review also provides a summary of various applications, along with the key challenges and future research directions. The first part of the review addresses the different types of magnetic fluids, the genesis of magnetic fluids, their synthesis methodologies, properties, and stabilization techniques are discussed in detail. The second part of the review highlights the applications of magnetic nanofluids and nanoemulsions (as model systems) in probing order-disorder transitions, scattering, diffraction, magnetically reconfigurable internal structures, molecular interaction, and weak forces between colloidal particles, conformational changes of macromolecules at interfaces and polymer-surfactant complexation at the oil-water interface. The last part of the review summarizes the interesting applications of magnetic fluids such as heat transfer, sensors (temperature, pH, urea detection, cations, defect detection sensors), tunable optical filters, removal of dyes, dynamic seals, magnetic hyperthermia-based cancer therapy and other biomedical applications. The applications of magnetic nanofluids in diverse disciplines are growing day by day, yet there are challenges in their practical adaptation as field-worthy or packaged products. This review provides a pedagogical description of magnetic fluids, with the necessary background, key concepts, physics, experimental protocols, design of experiments, challenges and future directions.

Controlled CO labilization of tungsten carbonyl precursors for the low-temperature synthesis of tungsten diselenide nanocrystals

We report a low-temperature colloidal synthesis of WSe2 nanocrystals from tungsten hexacarbonyl and diphenyl diselenide in trioctylphosphine oxide (TOPO). We identify TOPO-substituted intermediates, W(CO)5TOPO and cis-W(CO)4(TOPO)2 by infrared spectroscopy. To confirm these assignments, we synthesize aryl analogues of phosphine-oxide-substituted intermediates, W(CO)5TPPO (synthesized previously, TPPO = triphenylphosphine oxide) and cis-W(CO)4(TPPO)2 and fac-W(CO)3(TPPO)3 (new structures reported herein). Ligation of the tungsten carbonyl by either the alkyl or aryl phosphine oxides results in facile labilization of the remaining CO, enabling low-temperature decomposition to nucleate WSe2 nanocrystals. The reactivity in phosphine oxides is contrasted with syntheses containing phosphine ligands, where substitution results in decreased CO labilization and higher temperatures are required to induce nanocrystal nucleation.

A guide to the design of magnetic particle imaging tracers for biomedical applications

Magnetic Particle Imaging (MPI) is a novel and emerging non-invasive technique that promises to deliver high quality images, no radiation, high depth penetration and nearly no background from tissues. Signal intensity and spatial resolution in MPI are heavily dependent on the properties of tracers. Hence the selection of these nanoparticles for various applications in MPI must be carefully considered to achieve optimum results. In this review, we will provide an overview of the principle of MPI and the key criteria that are required for tracers in order to generate the best signals. Nanoparticle materials such as magnetite, metal ferrites, maghemite, zero valent iron@iron oxide core@shell, iron carbide and iron-cobalt alloy nanoparticles will be discussed as well as their synthetic pathways. Since surface modifications play an important role in enabling the use of these tracers for biomedical applications, coating options including the transfer from organic to inorganic media will also be discussed. Finally, we will discuss different biomedical applications and provide our insights into the most suitable tracer for each of these applications.

Recent advances in solution assisted synthesis of transition metal chalcogenides for photo-electrocatalytic hydrogen evolution

Hydrogen evolution from water splitting is considered to be an important renewable clean energy source and alternative to fossil fuels for future energy sustainability. Photocatalytic and electrocatalytic water splitting is considered to be an effective method for the sustainable production of clean energy, H₂. This perspective especially emphasizes research advances in the solution-assisted synthesis of transition metal chalcogenides for both photo and electrocatalytic hydrogen evolution applications. Transition metal chalcogenides (CdS, MoS₂, WS₂, TiS₂, TaS₂, ReS₂, MoSe₂, and WSe₂) have received intensified research interest over the past two decades on account of their unique properties and great potential across a wide range of applications. The photocatalytic activity of transition metal chalcogenides can further be improved by elemental doping, heterojunction formation with noble metals (Au, Pt, etc.), non-chalcogenides (MoS₂, In₂S₃, NiS_1-X), morphological tuning, through various solution-assisted synthesis processes, including liquid-phase exfoliation, heat-up, hot-injection methods, hydrothermal/solvothermal routes and template-mediated synthesis processes. In this review we will discuss recent developments in transition metal chalcogenides (TMCs), the role of TMCs for hydrogen production and various strategies for surface functionalization to increase their activity, different synthesis methods, and prospects of TMCs for hydrogen evolution. We have included a brief discussion on the effect of surface hydrogen binding energy and Gibbs free energy change for HER in electrocatalytic hydrogen evolution.

A simple method to form a forest of carbon nanotube bundles during growth stage

Abstract

This study reports a novel, cost-effective and reproducible method of densifying carbon nanotubes into bundles during growth stage. This is achieved by utilizing Fe3O4 catalyst nanoparticles and microwave plasma-enhanced chemical vapor deposition. The grown CNTs were characterized using TEM, SEM and Raman spectrometer. The achieved site density of bundles is 5 × 109 m–2, with an inter-bundle distance of 14 μm and bundle height of 17 μm. A qualitative investigation was carried out, and a possible densification mechanism was proposed.

Article Highlights

Advances of functional nanomaterials for magnetic resonance imaging and biomedical engineering applications

Functional nanomaterials have been widely used in biomedical fields due to their good biocompatibility, excellent physicochemical properties, easy surface modification, and easy regulation of size and morphology. Functional nanomaterials for magnetic resonance imaging (MRI) can target specific sites in vivo and more easily detect disease-related specific biomarkers at the molecular and cellular levels than traditional contrast agents, achieving a broad application prospect in MRI. This review focuses on the basic principles of MRI, the classification, synthesis and surface modification methods of contrast agents, and their clinical applications to provide guidance for designing novel contrast agents and optimizing the contrast effect. Furthermore, the latest biomedical advances of functional nanomaterials in medical diagnosis and disease detection, disease treatment, the combination of diagnosis and treatment (theranostics), multi-model imaging and nanozyme are also summarized and discussed. Finally, the bright application prospects of functional nanomaterials in biomedicine are emphasized and the urgent need to achieve significant breakthroughs in the industrial transformation and the clinical translation is proposed. This article is categorized under: Nanotechnology Approaches to Biology > Nanoscale Systems in Biology Diagnostic Tools > Diagnostic Nanodevices Therapeutic Approaches and Drug Discovery > Nanomedicine for Oncologic Disease.

Magnetic nanoparticles and magnetic particle spectroscopy-based bioassays: a 15 year recap

Magnetic nanoparticles (MNPs) have unique physical and chemical properties, such as high surface area to volume ratio and size-related magnetism, which are completely different from their bulk materials. Benefiting from the facile synthesis and chemical modification strategies, MNPs have been widely studied for applications in nanomedicine. Herein, we firstly summarized the designs of MNPs from the perspectives of materials and physicochemical properties tailored for biomedical applications. Magnetic particle spectroscopy (MPS), first reported in 2006, has flourished as an independent platform for many biological and biomedical applications. It has been extensively reported as a versatile platform for a variety of bioassays along with the artificially designed MNPs, where the MNPs serve as magnetic nanoprobes to specifically probe target analytes from fluid samples. In this review, the mechanisms and theories of different MPS platforms realizing volumetric- and surface-based bioassays are discussed. Some representative works of MPS platforms for applications such as disease diagnosis, food safety and plant pathology monitoring, drug screening, thrombus maturity assessments are reviewed. At the end of this review, we commented on the rapid growth and booming of MPS-based bioassays in its first 15 years. We also prospected opportunities and challenges that portable MPS devices face in the rapidly growing demand for fast, inexpensive, and easy-to-use biometric techniques.

Recent advances in engineering iron oxide nanoparticles for effective magnetic resonance imaging

Iron oxide nanoparticle (IONP) with unique magnetic property and high biocompatibility have been widely used as magnetic resonance imaging (MRI) contrast agent (CA) for long time. However, a review which comprehensively summarizes the recent development of IONP as traditional T₂ CA and its new application for different modality of MRI, such as T₁ imaging, simultaneous T₂/T₁ or MRI/other imaging modality, and as environment responsive CA is rare. This review starts with an investigation of direction on the development of high-performance MRI CA in both T₂ and T₁ modal based on quantum mechanical outer sphere and Solomon–Bloembergen–Morgan (SBM) theory. Recent rational attempts to increase the MRI contrast of IONP by adjusting the key parameters, including magnetization, size, effective radius, inhomogeneity of surrounding generated magnetic field, crystal phase, coordination number of water, electronic relaxation time, and surface modification are summarized. Besides the strategies to improve r₂ or r₁ values, strategies to increase the in vivo contrast efficiency of IONP have been reviewed from three different aspects, those are introducing second imaging modality to increase the imaging accuracy, endowing IONP with environment response capacity to elevate the signal difference between lesion and normal tissue, and optimizing the interface structure to improve the accumulation amount of IONP in lesion. This detailed review provides a deep understanding of recent researches on the development of high-performance IONP based MRI CAs. It is hoped to trigger deep thinking for design of next generation MRI CAs for early and accurate diagnosis.

•

T₂ contrast capacity of iron oxide nanoparticles (IONPs) could be improved based on quantum mechanical outer sphere theory.

•

IONPs could be expand to be used as effective T₁ CAs by improving q value, extending τ_s, and optimizing interface structure.

•

Environment responsive MRI CAs have been developed to improve the diagnosis accuracy.

•

Introducing other imaging contrast moiety into IONPs could increase the contrast efficiency.

•

Optimizing in vivo behavior of IONPs have been proved to enlarge the signal difference between normal tissue and lesion.

From Low to High Saturation Magnetization in Magnetite Nanoparticles: The Crucial Role of the Molar Ratios Between the Chemicals

In this study, a comprehensive characterization of iron oxide nanoparticles synthesized by using a simple one-pot thermal decomposition route is presented. In order to obtain monodisperse magnetite nanoparticles with high saturation magnetization, close to the bulk material, the molar ratios between the starting materials (solvents, reducing agents, and surfactants) were varied. Two out of nine conditions investigated in this study resulted in monodisperse iron oxide nanoparticles with high saturation magnetization (90 and 93% of bulk magnetite). The X-ray diffraction analyses along with the inspection of the lattice structure through transmission electron micrographs revealed that the main cause of the reduced magnetization in the other seven samples is likely due to the presence of distortion and microstrain in the particles. Although the thermogravimetric analysis, Raman and Fourier transform infrared spectroscopies confirmed the presence of covalently bonded oleic acid on the surface of all the samples, the particles with higher polydispersity and the lowest surface coating molecules showed the lowest saturation magnetization. Based on the observed results, it could be speculated that the changes in the kinetics of the reactions, induced by varying the molar ratio of the starting chemicals, can lead to the production of the particles with higher polydispersity and/or lattice deformation in their crystal structures. Finally, it was concluded that the experimental conditions for obtaining high-quality iron oxide nanoparticles, particularly the molar ratios and the heating profile, should not be chosen independently; for any specific molar ratio, there may exist a specific heating profile or vice versa. Because this synthetic consideration has rarely been reported in the literature, our results can give insights into the design of iron oxide nanoparticles with high saturation magnetization for different applications.

Sugar based cationic magnetic core-shell silica nanoparticles for nucleic acid extraction

Nucleic acid (NA) extraction is an essential step in molecular testing for a wide range of applications. Conventional extraction protocols usually suffer from time consuming removal of non-nucleic acid impurities. In this study, a new magnetic nanoparticle (MNP) is presented to simplify the NA extraction. A core-shell design, comprising of a ferromagnetic core coated with mesoporous silica, forms the basis of the functional nanoparticle. Chemical functionalization of the silica coating includes a multistep synthesis, in which an activated nanoparticle is coupled with a triethylene glycol spaced glycosyl imidazole. The molecular design aims for charge interactions between the imidazolium-based positive nanoparticle surface and nucleic acids, with specific hydrogen bonding between the surface bonded carbohydrate and nucleic acid targets to ensure nucleic acid selectivity and avoid protein contamination. Two different carbohydrates, differing in molecular size, were selected to compare the efficiency in terms of NA extraction. A triethylene glycol spacer provides sufficient flexibility to remove particle surface constraints for the interaction. The Brunauer-Emmett-Teller (BET) analysis shows a significantly larger surface area for the disaccharide-based particles NpFeSiImMalt (∼181 m2 g-1) compared to the monosaccharide analogue NpFeSiImGlc (∼116 m2 g-1) at small particles sizes (range ∼ 15 nm) and sufficient magnetization (29 emu g-1) for easy isolation by an external magnetic field. The particles enabled a high DNA particle loading ratio of 30-45 wt% (MNP/DNA ratio), reflecting an efficient extraction process. A high desorption rate (7 min) with more than 86% of unchanged DNA loading was recorded, indicating low damage to the target extract.

A Confinement-Driven Nucleation Mechanism of Metal Oxide Nanoparticles Obtained via Thermal Decomposition in Organic Media

Thermal decomposition is a very efficient synthesis strategy to obtain nanosized metal oxides with controlled structures and properties. For the iron oxide nanoparticle synthesis, it allows an easy tuning of the nanoparticle's size, shape, and composition, which is often explained by the LaMer theory involving a clear separation between nucleation and growth steps. Here, the events before the nucleation of iron oxide nanocrystals are investigated by combining different complementary in situ characterization techniques. These characterizations are carried out not only on powdered iron stearate precursors but also on a preheated liquid reaction mixture. They reveal a new nucleation mechanism for the thermal decomposition method: instead of a homogeneous nucleation, the nucleation occurs within vesicle-like-nanoreactors confining the reactants. The different steps are: 1) the melting and coalescence of iron stearate particles, leading to "droplet-shaped nanostructures" acting as nanoreactors; 2) the formation of a hitherto unobserved iron stearate crystalline phase within the nucleation temperature range, simultaneously with stearate chains loss and Fe(III) to Fe(II) reduction; 3) the formation of iron oxide nuclei inside the nanoreactors, which are then ejected from them. This mechanism paves the way toward a better mastering of the metal oxide nanoparticles synthesis and the control of their properties.

Harnessing the Therapeutic Potential of Extracellular Vesicles for Biomedical Applications Using Multifunctional Magnetic Nanomaterials

Extracellular vesicles (e.g., exosomes) carrying various biomolecules (e.g., proteins, lipids, and nucleic acids) have rapidly emerged as promising platforms for many biomedical applications. Despite their enormous potential, their heterogeneity in surfaces and sizes, the high complexity of cargo biomolecules, and the inefficient uptake by recipient cells remain critical barriers for their theranostic applications. To address these critical issues, multifunctional nanomaterials, such as magnetic nanomaterials, with their tunable physical, chemical, and biological properties, may play crucial roles in next-generation extracellular vesicles (EV)-based disease diagnosis, drug delivery, tissue engineering, and regenerative medicine. As such, one aims to provide cutting-edge knowledge pertaining to magnetic nanomaterials-facilitated isolation, detection, and delivery of extracellular vesicles and their associated biomolecules. By engaging the fields of extracellular vesicles and magnetic nanomaterials, it is envisioned that their properties can be effectively combined for optimal outcomes in biomedical applications.

Ferrofluids and bio-ferrofluids: looking back and stepping forward

Ferrofluids investigated along for about five decades are ultrastable colloidal suspensions of magnetic nanoparticles, which manifest simultaneously fluid and magnetic properties. Their magnetically controllable and tunable feature proved to be from the beginning an extremely fertile ground for a wide range of engineering applications. More recently, biocompatible ferrofluids attracted huge interest and produced a considerable increase of the applicative potential in nanomedicine, biotechnology and environmental protection. This paper offers a brief overview of the most relevant early results and a comprehensive description of recent achievements in ferrofluid synthesis, advanced characterization, as well as the governing equations of ferrohydrodynamics, the most important interfacial phenomena and the flow properties. Finally, it provides an overview of recent advances in tunable and adaptive multifunctional materials derived from ferrofluids and a detailed presentation of the recent progress of applications in the field of sensors and actuators, ferrofluid-driven assembly and manipulation, droplet technology, including droplet generation and control, mechanical actuation, liquid computing and robotics.

Solution-phase decomposition of ferrocene into wüstite-iron oxide core-shell nanoparticles

We report an improved method for the controlled solvent-phase decomposition of ferrocene into highly crystalline monodisperse iron oxide nanoparticles at relatively low temperatures. Solution-phase decomposition of ferrocene into nanoparticles has received little attention in the literature, due to the percieved stability of ferrocene. However, we synthesised wüstite FeO-iron oxide core-shell nanoparticles by thermally decomposing ferrocene in 1-octadecene solvent and in the presence of oleic acid and oleylamine, as surfactants. We report procedures that provide cubic and spherical core-shell iron oxide nanoparticles whose size (29.3 ± 2.3 nm for spheres, 38.6 ± 6.9 nm for distorted cubes and 23.5 ± 2.4 nm for distorted cubes with concave faces) and shape can be controlled through simple adjustments to reaction parameters. Transmission electron microscopy, scanning transmission electron microscopy, energy dispersive X-ray spectroscopy, electron energy-loss spectroscopy and powder X-ray diffraction analysis methods were used to characterise the nanoparticles.

Modifying superparamagnetic iron oxide and silica nanoparticles surfaces for efficient (MA)LDI-MS analyses of peptides and proteins

RATIONALE

Surface functionalization is considered to be the foundation for developing nanomaterial applications in matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) analyses. However, the surface properties of nanostructures can influence their interaction with the analyte and consequently the mass data. In the present study, functionalized nanoparticles (NPs) were used for MALDI-MS and laser desorption/ionization mass spectrometry (LDI-MS) experiments in order to evaluate the effect of the surface properties of NPs on tailoring the intensity of mass signals.

METHODS

Regarding the LDI-MS analyses, the surface of superparamagnetic iron oxide nanoparticles (SPIONs) was coated with nitrosonium tetrafluoroborate, citric acid, nitrodopamine, and gallic acid. Additionally, the SPIONs were applied as a matrix to analyze three small peptides. In the MALDI-MS analyses, silica NPs were selected as co-matrix and functionalized with cysteine, sulfobetaine, and amine alkoxysilanes. Then, the silica NPs were utilized as additives in the MALDI-MS samples of four proteins in a mass range between ~2000 and 60,000 Da.

RESULTS

The results of LDI-MS analyses demonstrated more than one order enhancement in the signal intensity of analytes based on the amount of electrostatic interaction and laser energy absorption by the surface ligands. However, those of MALDI-MS experiments indicated a significant signal improvement when achieving the colloidal stability of silica NPs in the matrix solution.

CONCLUSIONS

Based on the results, the surface properties of NPs affected the (MA)LDI-MS analyses indispensably. Finally, the functionalization of SPIONs represented a new model for the future development of NPs with both affinity and enhanced ionization abilities in mass spectrometry.

Recent Developments in Innovative Magnetic Nanoparticles-Based Immunoassays: From Improvement of Conventional Immunoassays to Diagnosis of COVID-19

During the ongoing COVID-19 pandemic, the development of point-of-care (POC) detection with high sensitivity and rapid detection time is urgently needed to prevent transmission of infectious diseases. Magnetic nanoparticles (MNPs) have been considered attractive materials for enhancing sensitivity and reducing the detection time of conventional immunoassays due to their unique properties including magnetic behavior, high surface area, excellent stability, and easy biocompatibility. In addition, detecting target analytes through color development is necessary for user-friendly POC detection. In this review, recent advances in different types of MNPs-based immunoassays such as improvement of the conventional enzyme-linked immunosorbent assay (ELISA), immunoassays based on the peroxidase-like activity of MNPs and based on the dually labeled MNPs, filtration method, and lateral-flow immunoassay are described and we analyze the advantages and strategies of each method. Furthermore, immunoassays incorporating MNPs for COVID-19 diagnosis through color development are also introduced, demonstrating that MNPs can become common tools for on-site diagnosis.

Pt3Ni@C Composite Material Designed and Prepared Based on Volcanic Catalytic Curve and Its High-Performance Static Lithium Polysulfide Semiliquid Battery

There are many challenges for the Static lithium polysulfide semiliquid battery in its commercial application, such as poor stability of the cathode material and further amplification of the lithium polysulfide shuttle effect. Therefore, this manuscript introduced a new type of Pt₃Ni@C composite material as cathode working electrode based on the principle of volcanic catalytic curve. Through symmetric battery test, CV, polarization curves and impedance test, it was found that Pt₃Ni@C composite material had good catalytic activity of lithium polysulfide to improve electrochemical kinetics. When the catholyte was Li₂S₈ and the charge-discharge voltage range was 1.8~2.6 V, the capacity maintained at approximately 550 mAh g⁻¹, and the coulombic efficiency maintained at approximately 95% after 100 cycles at a current rate of 0.5 mA cm⁻². The Pt₃Ni@C composite material is a potential cathode material with the specific capacity and long cycling stability of the static lithium polysulfide semiliquid battery.