Red-, Blue-, or No-Shift in Hydrogen Bonds: A Unified Explanation

Molecular Tailoring Approach for the Direct Estimation of Individual Noncovalent Interaction Energies in Molecular Systems

The noncovalent interactions (NCIs) are omnipresent in chemistry, physics, and biology. The study of such interactions offers insights into various physicochemical phenomena. Some indirect approaches proposed in the literature for exploring the NCIs are briefly reviewed in Section 1 of this Perspective. These include: (i) Shift in the stretching frequency of an X-Y bond involved in X-Y···Z interaction. (ii) Topological analysis of molecular electron density. (iii) Empirical equations derived employing experimental and theoretical quantities. However, a direct method for estimating individual intramolecular/intermolecular interaction energies has been conspicuous by its absence from the literature. We have developed a molecular tailoring approach (MTA)-based method enabling a direct and reliable estimation of the energy of intra- as well as intermolecular interactions. This method offers a direct and reliable estimation of these interactions, in particular of the hydrogen bonds (HB) in molecules/weakly bound clusters along with the respective cooperativity contribution. In Section 2, the basis of our method is discussed, along with some illustrative examples. The application of this method to a variety of molecules and clusters, with a special emphasis on estimating the HB energy along with the energy of other NCIs is presented in Section 3. Section 4 discusses some computational strategies for applying our method to large molecular clusters. The last Section provides a summary and a discussion on future developments.

Small-molecule organic electrode materials on carbon-coated aluminum foil for high-performance sodium-ion batteries

Organic molecular electrode materials are promising candidates in batteries. However, direct application of small molecule materials usually suffers from drastic capacity decay and inefficient utilization of active materials because of their high solubility in organic electrolytes and low electrical conductivity. Herein, a simple strategy is found to address the above issues through coating the small-molecule organic materials on a commercialized carbon-coated aluminum foil (CCAF) as the enhanced electrode. Both the experimental and calculation results confirm that the relatively rough carbon coating on the aluminum foil not only exhibits superior adsorption capacity of small-molecule organic electrode materials with a tight contact interface but also provides continuous electronic conduction channels for the facilitated charge transfer and accelerated reaction kinetics. In addition, the carbon coating also inhibits Al corrosion in electrochemical process. As a result, by using the tetrahydroxy quinone-fused aza-phenazine (THQAP) molecule as an example, the THQAP-CCAF electrode exhibits an excellent rate performance with a high capacity of 220 and 180 mAh g-1 at 0.1 and 2 A/g, respectively, and also a remarkable cyclability with a capacity retention of 77.3% even after 1700 cycles in sodium-ion batteries. These performances are much more superior than that of batteries with the THQAP on bare aluminum foil (THQAP-AF). This work provides a substantial step in the practical application of the small-molecule organic electrode materials for future sustainable batteries.

A Novel Gelatin Binder with Helical Crosslinked Network for High-Performance Si Anodes in Lithium-Ion Batteries

Silicon (Si) is a promising anode material for lithium-ion batteries, but its large volume expansion during cycling poses a challenge for the binder design. In this study, a novel gelatin binder is designed and prepared with a helical crosslinked network structure. This gelatin binder is prepared by enzymatic crosslinking and immersion in Hofmeister salt solution, which induces the formation of network and helical secondary structures. The helical crosslinked network structure can be analogous to a spring group system to effectively dissipate the stress and strain caused by the Si expansion. The gelatin binder is further partially carbonized by low-temperature pyrolysis, which improves its conductivity and stability. The Si anode with the optimized gelatin binder exhibits high initial coulombic efficiency, excellent rate performance, and long-term cycling stability. This study provides an innovative approach for the preparation of high-performance Si anodes, namely by controlling the molecular configuration of the binder to significantly improve the cycle stability, which can also be applied to other high-capacity anode materials that suffer from large volume changes during cycling.

Plant-Based Shape Memory Cryogel for Hemorrhage Control

The escalating global demand for sustainable manufacturing, motivated by concerns over energy conservation and carbon footprints, encounters challenges due to insufficient renewable materials and arduous fabrication procedures to fulfill specific requirements in medical and healthcare systems. Here, biosafe pollen cryogel is engineered as effective hemostats without additional harmful crosslinkers to treat deep noncompressible wounds. A straightforward and low-energy approach is involved in forming stable macroporous cryogel, benefiting from the unique micro-hierarchical structures and chemical components of non-allergenic plant pollen. It is demonstrated that the pollen cryogel exhibits rapid water/blood-triggered shape-memory properties within 2 s. Owing to their inherent nano/micro hierarchical structure and abundant chemical functional groups on the pollen surface, the pollen cryogel shows effective hemostatic performance in a mouse liver penetration model, which is easily removed after usage. Overall, the self-crosslinking pollen cryogel in this work pioneers a framework of potential clinical applications for the first-hand treatment on deep noncompressible wounds.

Blue- and Red-Shifting C-H⋯O Hydrogen Bonds of Cyclic Ethers with Haloforms: Effect of Ring-Size and Consistency with Bent's Rule

A DFT-based computational study is carried out to delve into the interplay between hyperconjugation and rehybridization effects underlying the formation of blue- or red-shifting H-bonds (HBs) in 1 : 1 complexes of cyclic ethers (HB acceptor) of varying ring-size with haloforms, CHF3 and CHCl3 (HB donor). The calculations reveal that with decreasing angular strain (increasing ring-size) of the cyclic ethers, the extent of blue-shift increases for 1 : 1 complexes with CHF3, while a reverse sequence is observed with CHCl3, eventually leading to a red-shifting HB in the oxepane : CHCl3 complex. It is noted that the trend in the shift of C-H stretching fundamental is not mirrored by the C-H bond length or interaction energies for both the systems studied, that is, the low sensitivity of the changes on the strain on the O-atom of HB acceptor (cyclic ethers) is to be emphasized.

Enhancing visible light photocatalytic activity of holmium doped g-C3N4 and DFT theoretical insights

In the search of novel photocatalysts to increase the effect of visible light in photocatalysis, g-C3N4 (CN) has become a shining star. Rare earth metals have been used as dopant material to reinforce the photocatalytic activity of CN due to their unique electron configuration recently. In this present study, the pure and different amounts of Ho-doped g-C3N4 (HoCN) photocatalysts were successfully synthesized using urea as a precursor by the one-pot method. Morphological, structural, optical, and vibrational properties of the synthesized photocatalysts were characterized by SEM, EDX, XRD, TGA, XPS, FTIR, PL, TRPL, Raman, DRS, and BET analyses. In addition, theoretical calculations using density functional theory (DFT) were meticulously carried out to delve the changes in the structural and electronic structure of CN with holmium doping. According to calculations, the chemical potential, electrophilicity, and chemical softness are higher for HoCN, while HOMO-LUMO gap, dipole moment, and the chemical hardness are lower for the pure one. Thus, holmium doping becomes desirable with low chemical hardness which indicates more effectivity and smaller HOMO-LUMO gap designate high chemical reactivity. To determine the photocatalytic efficiency of the pure and doped CN photocatalysts, the degradation of methylene blue (MB) was monitored under visible light. The results indicate that holmium doping has improved the photocatalytic activities of CN samples. Most strikingly, this improvement is noticeable for the 0.2 mmol doped CN sample that showed two times better photocatalytic activity than the pure one.

A structural role for tryptophan in proteins, and the ubiquitous Trp Cδ1-H...O=C (backbone) hydrogen bond

Tryptophan is the most prominent amino acid found in proteins, with multiple functional roles. Its side chain is made up of the hydrophobic indole moiety, with two groups that act as donors in hydrogen bonds: the Nϵ-H group, which is a potent donor in canonical hydrogen bonds, and a polarized Cδ1-H group, which is capable of forming weaker, noncanonical hydrogen bonds. Due to adjacent electron-withdrawing moieties, C-H...O hydrogen bonds are ubiquitous in macromolecules, albeit contingent on the polarization of the donor C-H group. Consequently, Cα-H groups (adjacent to the carbonyl and amino groups of flanking peptide bonds), as well as the Cϵ1-H and Cδ2-H groups of histidines (adjacent to imidazole N atoms), are known to serve as donors in hydrogen bonds, for example stabilizing parallel and antiparallel β-sheets. However, the nature and the functional role of interactions involving the Cδ1-H group of the indole ring of tryptophan are not well characterized. Here, data mining of high-resolution (r ≤ 1.5 Å) crystal structures from the Protein Data Bank was performed and ubiquitous close contacts between the Cδ1-H groups of tryptophan and a range of electronegative acceptors were identified, specifically main-chain carbonyl O atoms immediately upstream and downstream in the polypeptide chain. The stereochemical analysis shows that most of the interactions bear all of the hallmarks of proper hydrogen bonds. At the same time, their cohesive nature is confirmed by quantum-chemical calculations, which reveal interaction energies of 1.5-3.0 kcal mol-1, depending on the specific stereochemistry.

Heat-sealable, transparent, and degradable arabinogalactan/polyvinyl alcohol films with UV-shielding, antibacterial, and antioxidant properties

Petroleum-based packaging materials are nondegradable and unsustainable and thus are harmful to the environment. Renewable packaging films prepared from bio-based raw materials are promising alternatives to petroleum-based packaging materials. In this study, colorless and transparent bio-based films were successfully cast using a solution containing a mixture of arabinogalactan (AG) and poly (vinyl alcohol) (PVA). Vanillin was incorporated into the mixture to endow the films with UV-shielding, antioxidant, and antibacterial properties. The morphological, physical, antioxidant, and antibacterial properties of the blend films were then characterized. At an AG:PVA weight ratio of 1:3, and the vanillin content was 0.15 %, the tensile strength of the AG/PVA/Vanillin (APV) films reached ~28 MPa, while their elongation at break reached ~475 %. The addition of vanillin significantly affected the antioxidant and antibacterial properties of the blend films, which exhibited superb UV barrier capacity. The APV films exhibited extremely low oxygen transmittance, delaying the onset of mold/rot in strawberries and reducing their weight loss. Because of the heat sealability of the blend films, they can be used for encapsulating various substances, such as concentrated laundry liquid. Moreover, the blend films were recyclable and biodegradable. Thus, these films have great potential for applications that require sustainable packaging.

Hydrogen-bond-modulated negative linear compressibility in a V-shaped molecular crystal

A material with the "hidden" negative linear compressibility (NLC) will expand along a specific crystal direction upon uniformly compression to a critical pressure; such materials are thought to be promising candidates for non-linear actuators, switches and sensors. Herein, we use density functional theory (DFT) calculations to uncover the hidden NLC in a V-shaped molecular crystal, bis(5-amino-1,2,4-triazol-3-yl)methane (BATZM). The calculations indicate that the crystal is normally compressed over the pressure range of 0-3 GPa while it expands along the b-axis when the external hydrostatic pressure exceeds 3 GPa. The compressive behavior of the BATZM crystal is modulated by inter-molecular hydrogen bonds, which act as highly compressible springs at low pressures but robust struts at high pressures. Hence, the crystal prefers to compress the hydrogen bonds coupled with PLC at first and flatten the molecules, coupled with later NLC to resist the increasing external pressure. The compressive behavior of BATZM provides a strategy to design more hidden NLC materials via the rational use of the hydrogen bonds.

Influence of MXene Composition on Triboelectricity of MXene-Alginate Nanocomposites

MXenes are highly versatile and conductive 2D materials that can significantly enhance the triboelectric properties of polymer nanocomposites. Despite the growing interest in the tunable chemistry of MXenes for energy applications, the effect of their chemical composition on triboelectric power generation has yet to be thoroughly studied. Here, we investigate the impact of the chemical composition of MXenes, specifically the Ti3CNTx carbonitride vs the most studied carbide, Ti3C2Tx, on their interactions with sodium alginate biopolymer and, ultimately, the performance of a triboelectric nanogenerator (TENG) device. Our results show that adding 2 wt % of Ti3CNTx to alginate produces a synergistic effect that generates a higher triboelectric output than the Ti3C2Tx system. Spectroscopic analyses suggest that a higher oxygen and fluorine content on the surface of Ti3CNTx enhances hydrogen bonding with the alginate matrix, thereby increasing the surface charge density of the alginate oxygen atoms. This was further supported by Kelvin probe force microscopy, which revealed a more negative surface potential on Ti3CNTx-alginate, facilitating high charge transfer between the TENG electrodes. The optimized Ti3CNTx-alginate nanogenerator delivered an output of 670 V, 15 μA, and 0.28 W/m2. Additionally, we demonstrate that plasma oxidation of the MXene surface further enhances triboelectric performance. Due to the diverse surface terminations of MXene, we show that Ti3CNTx-alginate can function as either tribopositive or tribonegative material, depending on the counter-contacting material. Our findings provide a deeper understanding of how MXene composition affects their interaction with biopolymers and resulting tunable triboelectrification behavior. This opens up new avenues for developing flexible and efficient MXene-based TENG devices.

Functionalized polyoxometalates enable fast ion transport in solid-state batteries at room temperature

The coupling of functionalized inorganic polyoxometalates with polymer electrolytes leads to considerably enhanced mechanical properties and faster ion transport (1.1 × 10-4 S cm-1) at room temperature. The assembled Li/Li symmetric cell displays excellent stability in a 3000 h cycling test and a Li/LiFePO4 cell exhibits superior cycling performance over 250 cycles.

Conformational Mapping, Interactions, and Fluorine Impact by Combined Spectroscopic Approaches and Quantum Chemical Calculations

Noncovalent interactions and their careful variation can be crucial in understanding molecular structures, conformational topographies, and properties. Here, we examine the fluorination impact on the structure and conformational behavior of 2-(2-fluorophenyl)ethyl alcohol (2-FPEAL) by monitoring the first individual ionization-loss-stimulated Raman spectra of the jet-cooled molecule. The comparison of two different broad-range spectra and predicted equivalents discloses two distinct structures. One possesses a folded side chain (gauche) and the other an extended chain (anti) with the terminal hydrogen atom pointing opposite or toward the fluorine side, indicating the improper previous tentative assignment of the latter. These conformers resemble and differ from the nonfluorinated analogue structures. Theoretical analyses reveal interconversion pathways of 2-FPEAL conformers during expansion and the delicate balance between attractive (C-H···F and O-H···π) and repulsive interactions. These findings show the achievements of our integrated approach, suggesting its potential for overcoming future structural challenges.

Nanomodulator-Mediated Restructuring of Adipose Tissue Immune Microenvironments for Antiobesity Treatment

In obesity, the interactions between proinflammatory macrophages and adipocytes in white adipose tissues are known to play a crucial role in disease progression by providing inflammatory microenvironments. Here, we report that the functional nanoparticle-mediated modulation of crosstalk between adipocytes and macrophages can remodel adipocyte immune microenvironments. As a functional nanomodulator, we designed antivascular cell adhesion molecule (VCAM)-1 antibody-conjugated and amlexanox-loaded polydopamine nanoparticles (VAPN). Amlexanox was used as a model drug to increase energy expenditure. Compared to nanoparticles lacking antibody modification or amlexanox, VAPN showed significantly greater binding to VCAM-1-expressing adipocytes and lowered the interaction of adipocytes with macrophages. In high fat diet-fed mice, repeated subcutaneous administration of VAPN increased the populations of beige adipocytes and ameliorated inflammation in white adipose tissues. Moreover, the localized application of VAPN in vivo exerted a systemic metabolic effect and reduced metabolic disorders, including insulin tolerance and liver steatosis. These findings suggested that VAPN had potential to modulate the immune microenvironments of adipose tissues for the immunologic treatment of obesity. Although we used amlexanox as a model drug and anti-VCAM-1 antibody in VAPN, the concept of immune nanomodulators can be widely applied to the immunological treatment of obesity.

Nanomaterials Based on 2,7,12,17-Tetra-tert-butyl-5,10,15,20-tetraaza-21H,23H-porphine Exhibiting Bifunctional Sensitivity for Monitoring Chloramphenicol and Co2

Monitoring antibiotic retention in human body fluids after treatment and controlling heavy metal content in water are important requirements for a healthy society. Therefore, the approach proposed in this study is based on developing new optical sensors using porphyrin or its bifunctional hybrid materials made with AuNPs to accomplish the accurate detection of chloramphenicol and cobalt. To produce the new optical chloramphenicol sensors, 2,7,12,17-tetra-tert-butyl-5,10,15,20-tetraaza-21H,23H-porphine (TBAP) was used, both alone in an acid medium and as a hybrid material with AuNPs in a water-DMSO acidified environment. The same hybrid material in the unchanged water-DMSO medium was the sensing material used for Co2+ monitoring. The best results of the hybrid materials were explained by the synergistic effects between the TBAP azaporphyrin and AuNPs. Chloramphenicol was accurately detected in the range of concentrations between 3.58 × 10-6 M and 3.37 × 10-5 M, and the same hybrid material quantified Co2+ in the concentration range of 8.92 × 10-5 M-1.77 × 10-4 M. In addition, we proved that AuNPs can be used for the detection of azaporphyrin (from 2.66 × 10-5 M to 3.29 × 10-4 M), making them a useful tool to monitor porphyrin retention after cancer imaging procedures or in porphyria disease. In conclusion, we harnessed the multifunctionality of this azaporphyrin and of its newly obtained AuNP plasmonic hybrids to detect chloramphenicol and Co2+ quickly, simply, and with high precision.

Helical Superstructures from the Hierarchical Self-Assembly of Coil-Coil Block Copolymer Guided by Side Chain Amyloid-β(17-19) LVF Peptide

The rational design of precisely controlled hierarchical chiral nanostructures from synthetic polymers garnered inspiration from sophisticated biological materials. Since chiral peptide motifs induce helix formation in macromolecules, herein we report the synthesis of a novel type of hybrid polymer consisting of a β-sheet forming a LVF [L = leucine, V = valine, and F = phenylalanine] tripeptide pendant polymethacrylate block and a poly[poly(ethylene glycol) methyl ether methacrylate] (PPEGMA) block. The designed block copolymer self-organized into helical superstructures with a left-handed twisting sense, as visualized by field emission scanning electron microscopy, transmission electron microscopy, and atomic force microscopy. This intriguing hierarchical self-assembly is driven by the minimalistic peptide motif that itself has a high propensity to adopt an antiparallel β-sheet conformation. We also report the generation of a diverse array of nanostructures, including spherical micelles, spindle micelles, rod-like micelles, vesicles, helical supramolecular fibers, and helical toroids via self-assembly of the designed block copolymer in tetrahydrofuran/water mixed solvents. To realize the observable helical superstructure, a twisted two-dimensional core-shell tape is proposed as a structure model in which the peptide segments form an antiparallel β-sheet with a polymer shell. The findings contribute to the advancement of a helical polymer or the superhelical self-assembly of polymers, paving the way for diverse applications in materials science and related fields.

Molecular insights into the bonding mechanisms between selenium and dissolved organic matter

Natural organic matter (NOM) plays a critical role in the mobilization and bioavailability of metals and metalloids in the aquatic environment. Selenium (Se), an environmental contaminant of aquatic systems, has drawn increasing attention over the years. While Se is a vital micronutrient to human beings, animals and plants, excess Se intake may pose serious long-term risks. However, the interaction between Se and dissolved organic matter (DOM) remains relatively unexplored, especially the reaction mechanisms and interactions of specific NOM components of certain molecular weight and the corresponding functional group change. Herein, we report an investigation on the interactions between Se and DOM by focusing on the mass distribution profile change of operationally defined molecular weight fractions of humic acid (HA) and fulvic acid (FA). The results showed that across all molecular weights studied, HA fractions were more prone to enhanced aggregation upon introduction of Se into the system. For FA, the presence of Se species results in aggregation, dissociation, and redox reactions with the first two being the major mechanisms. Total organic carbon analysis (TOC), UV-vis spectroscopy (UV-vis), and Orbitrap MS data showed that [10, 30] kDa MW fraction had the largest aromatic decrease (CRAM-like, lignin-like and tannin-like) upon addition of SeO2 via dissociation as the dominant mechanism. Fourier transform infrared spectroscopy (FT-IR) revealed that Se based bridging or chelation of functional groups from individual DOM components through hydrogen bonding in the form of SeO⋯H and possibly Se⋯H and/or attractive electrostatic interactions lead to aggregated DOM1⋯Se⋯DOM2. It was concluded from two-dimensional correlation analyses of excitation emission matrix (EEM) and FT-IR that the preferred Se-binding follows lipid ➔ peptide ➔ tannin ➔ aromatic functionalities. These results provide new understanding of Se interactions with various NOM components in aquatic environments and provide insight for Se assessing health risk and/or treatment of Se contaminated water.

Spectroscopic and Computational Study of ZnCl2-Methanol Low-Melting-Temperature Mixtures

Alcoholic electrolyte mixtures have wide applications in industries. In this study, a series of mixtures composed of ZnCl2 and methanol (MeOH) with ZnCl2 mol % from 6.7 to 25 were prepared, and their spectral, structural, and thermodynamic properties were studied using infrared (IR) spectroscopy, differential scanning calorimetry (DSC), and density functional theory (DFT) calculations. The DFT-assisted analysis of excess spectra, supported by 2D-correlation spectroscopy, led to the identification of the major constituents of ZnCl2-MeOH mixtures, namely, MeOH monomer, MeOH dimer, and ZnCl2-3MeOH complex, produced after dissociation of MeOH trimer which represents the bulk methanol. The Hirshfeld charge analysis showed that in the competition between the O-H···Cl hydrogen bond (H-bond) and Zn ← O coordination bond to transfer charge in ZnCl2-MeOH complexes, the latter always dominates, making MeOH positively charged. The phase diagram of the binary system showed the presence of V-shaped glass transition temperatures (Tg), characteristic of low-melting mixture solvents (LoMMSs). The present study provides insights into the microscopic properties of the system and sheds light on the understanding of the general principles to prepare deep-eutectic solvents (DESs) or LoMMSs using inorganic salts and alcoholic compounds.

Adsorption characteristics and mechanisms of water-soluble polymers (PVP and PEG) on kaolin and montmorillonite minerals

The excessive use and accumulation of water-soluble polymers (WSPs, known as "liquid plastics") in the environment can pose potential risks to both ecosystems and human health, but the environmental fate of WSPs remains unclear. Here, the adsorption behavior of WSPs with different molecular weight on kaolinite (Kaol) and montmorillonite (Mt) were examined. The results showed that the adsorption of PEG and PVP on minerals were controlled by hydrogen bond and van der Waals force. The Fourier transform infrared (FTIR) spectra and two-dimensional correlation spectroscopy (2D-COS) analysis revealed that there were interactions between the Al-O and Si-O groups of the minerals and the polar O- or N-containing functional groups as well as the alkyl groups of PEG and PVP. The adsorption characteristics of WSPs were closely related to their molecular weight and the pore size of minerals. Due to the relatively large mesopore size of Kaol, both PEG and PVP were absorbed into inner spaces, for which the adsorption capacity increased with molecular weight of the polymers. For Mt, all types of PEG could enter its micropores, while PVP with larger molecular weights appeared to be confined externally, leading to a decrease in the adsorption capacity of PVP with increasing molecular weight. The findings of this study provide a theoretical basis for scientific evaluation of environmental processes of WSPs.

Conformational preference of 2-(4-methoxyphenyl)ethanol studied by supersonic jet spectroscopy: Intramolecular OH/π interaction

A π-type hydrogen bonding between the OH group and the π electron is a crucial factor for the conformational preference of the molecular structure with a flexible group. However, the information on the effect of the substituent on the OH/π interaction is insufficient. The laser-induced fluorescence (LIF) excitation, the dispersed fluorescence (DF), the IR-UV hole-burning, and the IR dip spectra of jet-cooled 2-(4-methoxyphenyl)ethanol were measured for the first time. Almost all bands observed in the spectral region of 35 550-36 500 cm-1 in the LIF excitation spectrum were successfully assigned with the DF and the IR-UV hole-burning spectra coupled with the quantum chemical calculation at M06-2x/6-311G and MP2/6-311G levels. Five conformers were found in the LIF excitation spectrum. The most stable conformer was Ggπ, and the second most stable conformer was Ggπ' (the trans rotamer of the methoxy group for Ggπ). Ggπ and Ggπ' had the OH group directed toward the π electron system of the benzene ring. The OH stretching frequency of Ggπ/Ggπ' of MPE in the IR dip spectra was red-shifted against that of Ggπ of phenylethanol, indicating that the introduction of the methoxy group would enhance the intramolecular OH/π interaction. In addition, the torsional vibration between the benzene ring and the side chain (-CH2CH2OH) (mode 63) was observed in the DF spectra of the Ggπ-00 and Ggπ'-00 band excitation, but their intensities were rather different, resulting from the different orientation of the OH group for each conformer toward the π electron system. The methoxy group would increase the negative charge on the benzene ring and would enhance the intramolecular OH/π interaction through the electrostatic interaction.

Experimental and Theoretical Survey of Intramolecular Spodium Bonds/σ/π-Holes and Noncovalent Interactions in Trinuclear Zn(II)-Salen Type Complex with OCN- Ions: A Holistic View in Crystal Engineering

In this work, one new centrosymmetric trinuclear Zn(II) complex 1, [{(OCN)Zn(L)}2Zn], using a salen-type ligand (H2L) in the presence of OCN- was synthesized and characterized via elemental, spectral, SEM-EDX, and single-crystal X-ray diffraction (SCXRD) study. In 1, SCXRD reveals two different stereochemical environments of zinc metal ions; one terminal Zn(II) center adopts square pyramidal geometries with the Addison parameter (τ) 0.095, and the central Zn(II) is tetracoordinated tetrahedral geometry. This article provides evidence of the significance and presence of spodium bonds (SpBs) in solid-state crystal structures involving a pseudotetrahedral environment of the central Zn-atom. X-ray structures reveal intramolecular Zn···O SpBs caused by the methoxy (-OCH3) substituent O-atom adjacent to the coordinated phenoxy O-atom. These noncovalent interactions have been thoroughly studied using density functional theory calculations at the RI-BP86[2]-D3[3]/def2-TZVP level of theory that characterizes the nature of SpBs, including the Baders quantum theory of atoms-in-molecules "QTAIM", molecular electrostatic potential (MEP) surface, and noncovalent index plot (NCI). In addition, a unique complex-isomer-based theoretical model has been vividly employed to estimate the SpBs energy in the complex. Natural bond orbital (NBO) analysis also tries to establish the differentiation between σ-hole and π-hole SpBs' natures more authentically. The complex energy frameworks were used to investigate noncovalent interactions. To better understand the different intermolecular interactions, we conducted a Hirshfeld surface, which revealed N···H (15.4%) and O···H (9.1%) contacts and Zn···O (5.1%) (SpBs).

Blueshift in Trifurcated Hydrogen Bonds: A Tradeoff between Tetrel Bonding and Steric Repulsion

We have quantum chemically investigated the origin of the atypical blueshift of the H-C bond stretching frequency in the hydrogen-bonded complex X- •••H3 C-Y (X, Y=F, Cl, Br, I), as compared to the corresponding redshift occurring in Cl- •••H3 N and Cl- •••H3 C-H, using relativistic density functional theory (DFT) at ZORA-BLYP-D3(BJ)/QZ4P. Previously, this blueshift was attributed, among others, to the contraction of the H-C bonds as the H3 C moiety becomes less pyramidal. Herein, we provide quantitative evidence that, instead, the blueshift arises from a direct and strong X- •••C interaction of the HOMO of A- with the backside lobe on carbon of the low-lying C-Y antibonding σ* LUMO of the H3 C-Y fragment. This X- •••C bond, in essence a tetrel bond, pushes the H atoms towards a shorter H-C distance and makes the H3 C moiety more planar. The blueshift may, therefore, serve as a diagnostic for tetrel bonding.

Thermochromic Printable and Multicolor Polymeric Composite Based on Hybrid Organic-Inorganic Perovskite

Hybrid organic-inorganic perovskites (PVKs) are among the most promising materials for optoelectronic applications thanks to their outstanding photophysical properties and easy synthesis. Herein, a new PVK-based thermochromic composite is demonstrated. It can reversibly switch from a transparent state (transmittance > 80%) at room temperature to a colored state (transmittance < 10%) at high temperature, with very fast kinetics, taking only a few seconds to go from the bleached to the colored state (and vice versa). X-ray diffraction, Fourier-transform infrared spectroscopy, differential scanning calometry, rheological, and optical measurements carried out during heating/cooling cycles reveal that thermochromism in the material is based on a reversible process of PVK disassembly/assembly mediated by intercalating polymeric chains, through the formation and breaking of hydrogen bonds between polymer and perovskite. Therefore, differently from other thermochromic perovskites, that generally work with the adsorption/desorption of volatile molecules, the system is able to perform several heating/cooling cycles regardless of environmental conditions. The color and transition temperature (from 70 to 120 °C) can be tuned depending on the type of perovskite. Moreover, this thermochromic material is printable and can be deposited by cheap techniques, paving the way for a new class of smart coatings with an unprecedented range of colors.

Examining the Water-Polymer Interactions in Non-Isocyanate Polyurethane/Polyhedral Oligomeric Silsesquioxane Hybrid Hydrogels

Non-isocyanate polyurethane (NIPU) networks physically modified with octa(3-hydroxy-3-methylbutyldimethylsiloxy)POSS (8OHPOSS, 0-10 wt%) were conditioned in environments of different relative humidities (up to 97%) to study water-polymer interactions. The equilibrium sorption isotherms are of Brunauer type III in a water activity range of 0-0.97 and are discussed in terms of the Guggenheim (GAB) sorption model. The study shows that the introduction of 8OHPOSS, even in a large amount (10 wt%), does not hinder the water affinity of the NIPU network despite the hydrophobic nature of POSS; this is attributable to the homogenous dispersion of POSS in the polymer matrix. The shift in the urethane-derived carbonyl bands toward lower wavenumbers with a simultaneous shift in the urethane N-H bending bands toward higher wavenumbers exposes the breakage of polymer-polymer hydrogen bonds upon water uptake due to the formation of stronger water-polymer hydrogen bonds. Upon water absorption, a notable decrease in the glass transition temperature (Tg) is observed for all studied materials. The progressive reduction in Tg with water uptake is driven by plasticization and slaving mechanisms. POSS moieties are thought to impact slaving indirectly by slightly affecting water uptake at very high hydration levels.

State of water in various environments: Aliphatic ketones. MIR/NIR spectroscopic, dielectric and theoretical studies

This work provides new insight into the state of water in a series of aliphatic ketones. For our studies, we selected nine aliphatic ketones of different size and structure to examine the effect of various structural motifs on behavior of water in the mixtures. Our results reveal that conformational flexibility of aliphatic chains in the linear ketones allows for effective shielding of the carbonyl group, and this flexibility is the main reason for poor solubility of water. Hence, in the linear ketones molecules of water are involved mostly in ketone-water interactions, while the water-water interactions are rare. Higher solubility of water in the cyclic ketones allows for creation of clusters of water, where the molecules are in water-like environment. The temperature rise in wet cyclic ketones increases population of ketone-water interactions at the expense of the water-water ones, while in the linear ketones and 2,6-dimethylcyclohexanone at an elevated temperature there is an increase in the population of singly bonded water at the expense of the doubly bonded one. DFT calculations reveal that the substitution of cyclohexanone by a single methyl group does not affect the strength of the ketone-water interactions, while it has a significant impact on the solubility of water in the ketone. The most important conclusion from this study is that the accessibility of the carbonyl group is the most important factor determining the intermolecular interactions and solubility of water in aliphatic ketones.

Revisiting conventional noncovalent interactions towards a complete understanding: from tetrel to pnicogen, chalcogen, and halogen bond

Typical noncovalent interactions, including tetrel (TtB), pnicogen (PniB), chalcogen (ChalB), and halogen bonds (HalB), were systematically re-investigated by modeling the N⋯Z interactions (Z = Si, P, S, Cl) between NH3 - as a nucleophilic, and SiF4, PF3, SF2, and ClF - as electrophilic components, employing highly reliable ab initio methods. The characteristics of N⋯Z interactions when Z goes from Si to Cl, were examined through their changes in stability, vibrational spectroscopy, electron density, and natural orbital analyses. The binding energies of these complexes at CCSD(T)/CBS indicate that NH3 tends to hold tightly most with ClF (-34.7 kJ mol-1) and SiF4 (-23.7 kJ mol-1) to form N⋯Cl HalB and N⋯Si TtB, respectively. Remarkably, the interaction energies obtained from various approaches imply that the strength of these noncovalent interactions follows the order: N⋯Si TtB > N⋯Cl HalB > N⋯S ChalB > N⋯P PniB, that differs the order of their corresponding complex stability. The conventional N⋯Z noncovalent interactions are characterized by the local vibrational frequencies of 351, 126, 167, and 261 cm-1 for TtB, PniB, ChalB, and HalB, respectively. The SAPT2+(3)dMP2 calculations demonstrate that the primary force controlling their strength retains the electrostatic term. Accompanied by the stronger strength of N⋯Si TtB and N⋯Cl HalB, the AIM and NBO results state that they are partly covalent in nature with amounts of 18.57% and 27.53%, respectively. Among various analysis approaches, the force constant of the local N⋯Z stretching vibration is shown to be most accurate in describing the noncovalent interactions.

Synthesis of Imidazole-Based Deep Eutectic Solvents as Solid Lubricants: Lubricated State Transition

The controllable character of the melting point of deep eutectic solvents (DESs) makes it easy to realize lubricated state transitions and produce excellent lubricating properties during friction. In this work, a series of novel imidazole-based DESs were synthesized to present a room-temperature solid state by shifting its eutectic point. Tribological test results show that the wear volume of these DESs decreases as the alkyl chains of the hydrogen bond donors increase. A proper deviation of the eutectic point in DESs produces stable lubricating properties. The present work provides a novel and simple method to prepare solid lubricants and enriches the use of DESs as lubricants. Simultaneously, the method expected to replace the use of conventional cutting fluids.

Bonding and Acidity of the Formal Hydride in the Prototypical Au9 (PPh3 )8 H2+ Nanocluster

The role of hydrogen atoms as surface ligands on metal nanoclusters is of profound importance but remains difficult to directly study. While hydrogen atoms often appear to be incorporated formally as hydrides, evidence suggests that they donate electrons to the cluster's delocalized superatomic orbitals and may consequently behave as acidic protons that play key roles in synthetic or catalytic mechanisms. Here we directly test this assertion for the prototypical Au9 (PPh3 )8 H2+ nanocluster, formed by addition of a hydride to the well-characterized Au9 (PPh3 )8 3+ . Using gas-phase infrared spectroscopy, we were able to unambiguously isolate Au9 (PPh3 )8 H2+ and Au9 (PPh3 )8 D2+ , revealing an Au-H stretching mode at 1528 cm-1 that shifts to 1038 cm-1 upon deuteration. This shift is greater than the maximum expected for a typical harmonic potential, suggesting a potential governing cluster-H bonding that has some square-well character consistent with the hydrogen nucleus behaving as a metal atom in the cluster core. Complexing this cluster with very weak bases reveals a redshift of 37 cm-1 in the Au-H vibration, consistent with those typically seen for moderately acidic groups in gas phase molecules and providing an estimate of the acidity of Au9 (PPh3 )8 H2+ , at least with regard to its surface reactivity.

C-H Groups as Donors in Hydrogen Bonds: A Historical Overview and Occurrence in Proteins and Nucleic Acids

Hydrogen bonds constitute a unique type of non-covalent interaction, with a critical role in biology. Until fairly recently, the canonical view held that these bonds occur between electronegative atoms, typically O and N, and that they are mostly electrostatic in nature. However, it is now understood that polarized C-H groups may also act as hydrogen bond donors in many systems, including biological macromolecules. First recognized from physical chemistry studies, C-H…X bonds were visualized with X-ray crystallography sixty years ago, although their true significance has only been recognized in the last few decades. This review traces the origins of the field and describes the occurrence and significance of the most important C-H…O bonds in proteins and nucleic acids.

Design and characterization of functional TiO2-lignin fillers used in rotational molded polyethylene containers

In this study, new TiO2-lignin hybrid systems were synthesized and characterized by various methods, including non-invasive backscattering (NIBS), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), elemental analysis (EA) and zeta potential analysis (ZP). The weak hydrogen bonds between the components, as shown on FTIR spectra, proved the production of class I hybrid systems. TiO2-lignin systems were found to display good thermal stability and relatively good homogeneity. These newly designed hybrid materials were used to produce functional composites via rotational molding in a linear low-density polyethylene (LLDPE) matrix at 2.5 % and 5.0 % loading by weight of the fillers, namely, TiO2, TiO2-lignin (5:1 wt./wt.), TiO2-lignin (1:1 wt./wt.), TiO2-lignin (1:5 wt./wt.) and pristine lignin, creating rectangular specimens. The mechanical properties of the specimens were measured via compression testing and by low-energy impact damage testing (the drop test). The results showed that the system containing 5.0 % by weight of TiO2-lignin (1:1 wt./wt.) had the most positive effect on the container's compression strength, while the LLDPE filled with 5.0 % by weight of TiO2-lignin (5:1 wt./wt.) demonstrated the best impact resistance among all the tested composites.

Quantifying the Intrinsic Strength of C-H⋯O Intermolecular Interactions

It has been recognized that the C-H⋯O structural motif can be present in destabilizing as well as highly stabilizing intermolecular environments. Thus, it should be of interest to describe the strength of the C-H⋯O hydrogen bond for constant structural factors so that this intrinsic strength can be quantified and compared to other types of interactions. This description is provided here for C_2h-symmetric dimers of acrylic acid by means of the calculations that employ the coupled-cluster theory with singles, doubles, and perturbative triples [CCSD(T)] together with an extrapolation to the complete basis set (CBS) limit. Dimers featuring the C-H⋯O and O-H⋯O hydrogens bonds are carefully investigated in a wide range of intermolecular separations by the CCSD(T)/CBS approach, and also by the symmetry-adapted perturbation theory (SAPT) method, which is based on the density-functional theory (DFT) treatment of monomers. While the nature of these two types of hydrogen bonding is very similar according to the SAPT-DFT/CBS calculations and on the basis of a comparison of the intermolecular potential curves, the intrinsic strength of the C-H⋯O interaction is found to be about a quarter of its O-H⋯O counterpart that is less than one might anticipate.

Fragments-in-fragments method for efficient and reliable estimates of individual hydrogen bond energies in large molecular clusters

The knowledge of individual hydrogen bond (HB) strength in molecular clusters is indispensable to get insights into the bulk properties of condensed systems. Recently, we have developed the molecular tailoring approach based (MTA-based) method for the estimation of individual HB energy in molecular clusters. However, the direct use of this MTA-based method to large molecular clusters becomes progressively difficult with the increase in the size of a cluster. To overcome this caveat, herein, we propose the use of linear scaling method (such as the original MTA method) for the estimation of single-point (SP) energies of large-sized parent molecular cluster and their respective fragments. Because the fragments of the MTA-based method, for the estimation of HB energy, are further fragmented, this proposed strategy is called as Fragments-in-Fragments (Frags-in-Frags) method. The SP energies of fragments and parent cluster calculated by the Frags-in-Frags approach were utilized to estimate the individual HB energy. The estimated individual HB energies, in various molecular clusters, by Frags-in-Frags method are found to be in excellent linear agreement with their MTA-based counterparts (R²  = 0.9975 of 348 data points). The difference being less than 0.5 kcal/mol in most of the cases. Furthermore, RMSD is 0.43 kcal/mol, MAE is 0.33 kcal/mol, and the standard deviation is 0.44 kcal/mol. Importantly, the Frags-in-Frags method not only enables the reliable estimation of HB energy in large molecular clusters but also requires less computational time and can be possible even with off-the-shelf hardware.

Raman Evidence of Multiple Adsorption Sites and Structural Transformation in ZIF-4

The zeolitic imidazolate framework, ZIF-4, exhibits soft porosity and is known to show pore volume changes with temperatures, pressures, and guest adsorption. However, the mechanism and adsorption behavior of ZIF-4 are not completely understood. In this work, we report an open to narrow pore transition in ZIF-4 around T ∼ 253 K upon lowering the temperature under vacuum (10^-6 Torr) conditions, facilitated by C-H···π interactions. In the gaseous environment of N₂ and CO₂ around the framework, characteristic Raman peaks of adsorbed gases were observed under ambient conditions of 293 K and 1 atm. A guest-induced transition at ∼153 K resulting in the opening of new adsorption sites was inferred from the Raman spectral changes in the C-H stretching modes and low-frequency modes (<200 cm^-1). In contrast to a single vibrational mode generally reported for entrapped N₂, we show three Raman modes of adsorbed N₂ in ZIF-4. The adsorption is facilitated by dispersive and quadrupolar interactions. From our temperature-dependent Raman results and theoretical analysis based on the density functional tight-binding approach, we conclude that the C-Hs are the preferred adsorption sites on ZIF-4 in the following order: C4-H, C5-H > C2-H > center of the Im ring (interacting with C-H centers) > center of the cavity. We also show that with an increasing concentration of N₂ adsorbed at low temperatures, the ZIF-4 structure undergoes shear distortion of the window formed by 4-imidazole rings and consequent volumetric expansion. Our results have immediate implications in the field of porous materials and could be vital in identifying subtle structural transformations that may favor or hinder guest adsorption.

Vibrational Solvatochromism Study of the C-H···O Improper Hydrogen Bond

The improper C-H···O hydrogen bond is an important weak interaction, with broad implications for protein and nucleic acid structure, molecular recognition, enzyme catalysis, and drug interaction. Despite its wide identification in crystal structures, the general existence of C-H···O hydrogen bonds remains elusive especially for natural C-H groups in bulk aqueous solutions at room temperature. Vibrational spectroscopy is a promising methodology to tackle this challenge, as formation of C-H···O hydrogen bonds usually causes shifts of the C-H stretch frequency. Yet, prior observations are inconclusive, as they are all based on a simple blue-shift in aqueous solution and cannot distinguish if it is an effect caused by solvent reorganization or a specific hydrogen-bonding interaction. In this work, we used vibrational solvatochromism as a calibration of the solvent reorganization effect and identified a specific H-bonding interaction. We performed vibrational solvatochromism study of C-H(D) of multiple alcohol molecules including the CH mode of CD₃CH(OH)CD₃ and the CD₃ modes of CD₃OH, CD₃CH₂OH, and CD₃CH(OH)CD₃ in a series of solvents. We found an abnormal blue-shift of the Raman frequency of the C-H and C-D bonds at both the C_α and C_β positions of alcohols in water, which lies in an opposite direction to the expected trend due to vibrational solvatochromism. This experimental evidence supports that the improper C-H···O hydrogen bonds might generally exist between nonpolarized C-H and water in liquid solutions at room temperature.

Comparative study of the hydrogen bonding interactions between ester-functionalized/non-functionalized imidazolium-based ionic liquids and DMSO

There have been some studies on the microscopic properties of ester-functionalized ionic liquids (ILs), but the microscopic properties of their mixtures with co-solvents have seldom been reported. In practical applications, ILs are usually used together with co-solvents. Therefore, it is very important to study the microstructure of ester-functionalized ILs and co-solvents. In this work, the hydrogen bonding interactions between ester-functionalized IL 1-acetoxyethyl-3-methylimidazolium tetrafluoroborate (AOEMIMBF₄) and DMSO were studied using spectroscopic methods and quantum chemical calculations. Non-functionalized IL 1-butyl-3-methylimidazolium tetrafluoroborate (BMIMBF₄) and DMSO were used for comparison. The results indicate that (1) by adding DMSO, the hydrogen bonding interactions of ν(C2-H) were enhanced, and DMSO could form hydrogen bonds with anions and cations simultaneously. (2) The incorporation of an ester group could enhance the hydrogen bonding interactions. (3) Both the stretching vibration of C2-H and CO indicated changes in the microscopic structure: AOEMIMBF₄ ion clusters first interacted with DMSO, then broke into AOEMIMBF₄-DMSO complexes and finally existed as [AOEMIM]⁺/[BF₄]^--DMSO complexes.

DFT and TD-DFT study of hydrogen bonded complexes of aspartic acid and n water (n = 1 and 2)

CONTEXT

Hydrogen bonds (HB) influence the conformational preferences of biomolecules and their optical and electronic properties. The directional interaction of molecules of water can be a prototype to understand the effects of HBs on biomolecules. Among the neurotransmitters (NT), L-aspartic acid (ASP) stands out due to its importance in health and as a precursor of several biomolecules. As it presents different functional groups and readily forms inter- and intramolecular HBs, ASP can be considered a prototype for understanding the behavior of NTs when interacting by HB with other substances. Although several theoretical studies have been performed in the past on isolated ASP and its formed complexes with water, both in gas and liquid phases, using DFT and TD-DFT formalisms, these works did not perform large basis set calculations or study electronic transitions of ASP-water complexes. We investigated the HB interactions in complexes of ASP and water molecules. The results show that the interactions between the carboxylic groups of ASP with water molecules, forming cyclic structures with two HBs, lead to more stable and less polar complexes than other conformers formed between water and the NH₂ group. It was observed that there is a relationship between the deviation in the UV-Vis absorption band of the ASP and the interactions of water with the HOMO and LUMO orbitals with the stabilization/destabilization of the S₁ state to the S₀ of the complexes. However, in some cases, such as 1:1 complex ASP-W2, this analysis may be inaccurate due to small changes in ΔE.

METHODS

We studied the landscapes of the ground state surface of different conformers of isolated L-ASP and the L-ASP-(H₂O)_n complexes (n = 1 and 2) using the DFT formalism, with the B3LYP functional, and six different basis sets: 6-31 +  + G(d,p), 6-311 +  + G(d,p), D95 +  + (d,p), D95V +  + (d,p), cc-pVDZ, and, cc-pVTZ basis sets. The cc-pVTZ basis set provides the minimum energy of all conformers, and therefore, we performed the analysis with this basis set. We evaluated the stabilization of the ASP and complexes using the minimum ground state energy, corrected by the zero point energy and the interaction energy between the ASP and the water molecules. We also calculated the vertical electronic transitions S₁ ← S₀, and their properties using the TD-DFT formalism at B3LYP/cc-pVTZ level with the optimized geometries for S₀ state with the same basis set. For the analysis of the vertical transitions of isolated ASP and the ASP-(H₂O)_n complexes, we calculated the electrostatic energy in the S₀ and S₁ states. We performed the calculations with the Gaussian 09 software package. We used the VMD software package to visualize the geometries and shapes of the molecule and complexes.

Assessment of synthesized chitosan/halloysite nanocarrier modified by carbon nanotube for pH-sensitive delivery of curcumin to cancerous media

Constructing a system to carry medicine for more effective remedy of cancer has been a leading challenge, as the number of cancer cases continues to increase. In this present research, a curcumin-loaded chitosan/halloysite/carbon nanotube nanomixture was fabricated by means of water/oil/water emulsification method. The drug loading efficiency (DL) and entrapment efficiency (EE), as a result, reached 42 % and 88 %, respectively and FTIR and XRD analysis confirmed the bonding between the drug and nanocarrier. Morphological observation through FE-SEM and characterization through DLS analysis demonstrated that the average size of nanoparticles is 267.37 nm. Assessment of release within 96 h in pH 7.4 and 5.4 showed sustained release. For more investigation, release data was analyzed by diverse kinetic models to understand the mechanism in the release procedure. An MTT assay was also carried out, and the results illustrated apoptosis induction on MCF-7 cells and exhibited ameliorated cytotoxicity of the drug-loaded nanocomposite compared to the free curcumin. These findings suggest that the unique pH-responsive chitosan/halloysite/carbon nanotube nanocomposite might make a good option for drug delivery systems, particularly for the cancer treatment.

Application of a novel and green temperature-responsive deep eutectic solvent system to simultaneously extract and separate different polar active phytochemicals from Schisandra chinensis (Turcz.) Baill

In the present study, a novel and green temperature-responsive deep eutectic solvent (TRDES) system was developed and applied for the simultaneous extraction and separation of different polar active phytochemicals from Schisandra chinensis (Turcz.) Baill. The TRDES, consisting of amino alcohols and phenolic compounds, was chosen as the switching medium, and an upper critical solution temperature (UCST) type switchable solvent was obtained by adding an inorganic salt solution. The switchable phase diagram was plotted based on the relationship between the phase change temperature, the concentration and the amount of sodium chloride solution. Under optimal parameters, the yields with TRDES for different polar active phytochemicals (lignanoids and polysaccharides) from the dried fruit of Schisandra chinensis (DFSC) were 1.62 ∼ 1.17-fold and 1.39-fold to those with conventional solvents. Also, the TRDES system was still effective on extraction of DFSC lignanoids and polysaccharides after four cycles of extraction. The separated polysaccharides and lignanoids both had strong antioxidant activities with IC₅₀ values of 1.92 mg/ mL and 0.10 mg/ mL against 2,2'-Azinobis(3-ethylbenzothiazoline-6-sulfonic acid)(ABTS), respectively. The extraction mechanism of TRDES was postulated by Density functional theory (DFT) calculations the hydrogen bonding in TRDES was the main factor to the higher extraction yield. This temperature-responsive deep eutectic solvent could be widely used for the efficient extraction and separation of multi-polar components. As a green and recyclable solvents, TRDES has great potential for the lower cost production from plants.

Multifunctional Amine Modifiers for Selective Dehydration of Methyl Lactate to Acrylates

Dehydration of methyl lactate to acrylic acid and methyl acrylate was experimentally evaluated over a Na-FAU zeolite catalyst impregnated with multifunctional diamines. 1,2-Bis(4-pyridyl)ethane (12BPE) and 4,4'-trimethylenedipyridine (44TMDP), at a nominal loading of 40 wt % or two molecules per Na-FAU supercage, afforded a dehydration selectivity of 96 ± 3% over 2000 min time on stream. Although 12BPE and 44TMDP have van der Waals diameters approximately 90% of the Na-FAU window opening diameter, both flexible diamines interact with internal active sites of Na-FAU as characterized by infrared spectroscopy. During continuous reaction at 300 °C, the amine loadings in Na-FAU remained constant for 12BPE but decreased as much as 83% for 44TMDP. Tuning the weighted hourly space velocity (WHSV) from 0.9 to 0.2 h^-1 afforded a yield as high as 92% at a selectivity of 96% with 44TMDP impregnated Na-FAU, resulting in the highest yield reported to date.

Manifestations of intramolecular H-bonds of CH… O and OH… C type in quercetin molecule: Analysis of IR spectra by mean of density functional theory

The IR spectra of 48 conformers of quercetin which represent full conformation space of its tautomers have been modeled at B3LYP/6-311++G(d,p) level of the density functional theory. The presence of intramolecular H-bonds C2'H/C6'H…O3 and O3H…C2'/C6' was characterized by their spectral manifestations. The C2'H/C6'H…O3 contacts were found to have a spectral blue-shift. The O3H…C2'/C6' contacts were mostly red-shifted. The stretching vibrations of H-bonds C2'H/C6'H…O3 demonstrate an increase in the intensity of the modes of stretching vibrations ν(C2'H)/ν(C6'H) and an increase in the frequency of their out-of-plane vibrations γ(C2'H)/γ(C6'H). Most of the spectral parameters correlate a little with the energy of the H-bonds.

Two-Step ONIOM Method for the Accurate Estimation of Individual Hydrogen Bond Energy in Large Molecular Clusters

The study of molecular clusters to understand the properties of condensed systems has been the subject of immense interest. To get insight into these properties, the knowledge of various noncovalent interactions present in these molecular clusters is indispensable. Our recently developed molecular tailoring approach-based (MTA-based) method for the estimation of the individual hydrogen bond (HB) energy in molecular clusters is useful for this purpose. However, the direct application of this MTA-based method becomes progressively difficult with the increase in the size of the cluster. This is because of the difficulty in the evaluation of single-point energy at the correlated level of theory. To overcome this caveat, herein, we propose a two-step method within the our own N-layer integrated molecular orbital molecular mechanics (ONIOM) framework. In this method, the HB energy evaluated by the MTA-based method employing the actual molecular cluster at a low Hartree-Fock (HF) level of theory is added to the difference in the HB energies evaluated by the MTA-based method, employing an appropriate small model system, called the shell-1 model, calculated at high (MP2) and low (HF) levels of theory. The shell-1 model of a large molecular cluster is made up of only a few molecules that are in direct contact (by a single HB) with the two molecules involved in the formation of an HB under consideration. We tested this proposed two-step ONIOM method to estimate the individual HB energies in various molecular clusters, viz., water (W_n, n = 10-16, 18 and 20), (H₂O₂)₁₂, (H₂O₃)₈, (NH₃)_n and strongly interacting (HF)₁₅ and (HF)_m(W)_n clusters. Furthermore, these estimated individual HB energies by the ONIOM method are compared with those calculated by the MTA-based method using actual molecular clusters. The estimated individual HB energies by the ONIOM method, in all these clusters, are in excellent linear one-to-one agreement (R² = 0.9996) with those calculated by the MTA-based method using actual molecular clusters. Furthermore, the small values of root-mean-square deviation (0.06), mean absolute error (0.04), |ΔE_max| (0.21) and Sε (0.06) suggest that this two-step ONIOM method is a pragmatic approach to provide accurate estimates of individual HB energies in large molecular clusters.

Highly Selective H2S Gas Sensor Based on Ti3C2Tx MXene-Organic Composites

Cost-effective and high-performance H₂S sensors are required for human health and environmental monitoring. 2D transition-metal carbides and nitrides (MXenes) are appealing candidates for gas sensing due to good conductivity and abundant surface functional groups but have been studied primarily for detecting NH₃ and VOCs, with generally positive responses that are not highly selective to the target gases. Here, we report on a negative response of pristine Ti₃C₂T_x thin films for H₂S gas sensing (in contrast to the other tested gases) and further optimization of the sensor performance using a composite of Ti₃C₂T_x flakes and conjugated polymers (poly[3,6-diamino-10-methylacridinium chloride-co-3,6-diaminoacridine-squaraine], PDS-Cl) with polar charged nitrogen. The composite, preserving the high selectivity of pristine Ti₃C₂T_x, exhibits an H₂S sensing response of 2% at 5 ppm (a thirtyfold sensing enhancement) and a low limit of detection of 500 ppb. In addition, our density functional theory calculations indicate that the mixture of MXene surface functional groups needs to be taken into account to describe the sensing mechanism and the selectivity of the sensor in agreement with the experimental results. Thus, this report extends the application range of MXene-based composites to H₂S sensors and deepens the understanding of their gas sensing mechanisms.

Factors contributing to halogen bond strength and stretch or contraction of internal covalent bond

The halogen bond formed by a series of Lewis acids TF₃X (T = C, Si, Ge, Sn, Pb; X = Cl, Br, I) with NH₃ is studied by quantum chemical calculations. The interaction energy is closely mimicked by the depth of the σ-hole on the X atom as well as the full electrostatic energy. There is a first trend by which the hole is deepened if the T atom to which X is attached becomes more electron-withdrawing: C > Si > Ge > Sn > Pb. On the other hand, larger more polarizable T atoms are better able to transmit the electron-withdrawing power of the F substituents. The combination of these two opposing factors leaves PbF₃X forming the strongest XBs, followed by CF₃X, with SiF₃X engaging in the weakest bonds. The charge transfer from the NH₃ lone pair into the σ*(TX) antibonding orbital tends to elongate the covalent TX bond, and this force is largest for the heavier X and T atoms. On the other hand, the contraction of this bond deepens the σ-hole at the X atom, which would enhance both the electrostatic component and the full interaction energy. This bond-shortening effect is greatest for the lighter X atoms. The combination of these two opposing forces leaves the T-X bond contracting for X = Cl and Br, but lengthening for I.

Water Complex of Imidogen

Imidogen (NH) is the simplest nitrogen hydride that plays an important role in combustion and interstellar chemistry, and its combination with H₂O is the prototypical amidation reaction of O-H bonds involving a nitrene intermediate. Herein, we report the observation of the elusive water complex of NH, a prereaction complex associated with the amidation reaction in a solid N₂ matrix at 10 K. The hydrogen-bonded structure of NH···OH₂ (versus HN···HOH) is confirmed via IR spectroscopy with comprehensive isotope labeling (D, ¹⁸O, and ¹⁵N) and quantum chemical calculations at the UCCSD(T)/aug-cc-pVQZ level of theory. In line with the observed absorption at 350 nm, irradiation of the complex at 365 nm leads to O-H bond insertion, yielding hydroxylamine NH₂OH.

Non-covalent interactions in the monohydrated complexes of 1,2,3,4-tetrahydroisoquinoline

The eleven monohydrates of 1, 2, 3, 4-tetrahydroisoquinoline (THIQ) are analyzed through natural bond orbital (NBO) analysis and QTAIM methods employing M06-2X functional in DFT and MP2 methods. Here, the role of OH bonds as an acceptor and donor is critically analyzed. The role of lone pairs of O is critically monitored in two of the complexes, where N-H···O hydrogen bonds are present. The relative contributions of rehybridisation and hyperconjugation are compared in detail. Popelier criteria are satisfied in all the complexes barring a few exceptions involving weak hydrogen bonds. At the bond critical points (BCP), four monohydrates show higher values of electron density (ρ_C) and negative values of total electron energy density (H_C), while Laplacian [Formula: see text] remains positive. These complexes satisfy the criteria of partial covalency. All these are O-H⋅⋅⋅N-type bonds. Remaining h-bonds are weaker in nature. These are also confirmed by the smaller values of ρ_C at the respective BCP. The variation of potential energy density (V_C) among the complexes seems to be the most important factor in determining the nature of non-covalent interactions.