Superparamagnetic iron oxide nanoparticles with variable size and an iron oxidation state as prospective imaging agents

Silk fibroin nanoparticles for locoregional cancer therapy: Preliminary biodistribution in a murine model and microfluidic GMP-like production

Silk fibroin nanoparticles (SFNs) have been widely investigated for drug delivery, but their clinical application still faces technical (large-scale and GMP-compliant manufacturing), economic (cost-effectiveness in comparison to other polymer-based nanoparticles), and biological (biodistribution assessments) challenges. To address biodistribution challenge, we provide a straightforward desolvation method (in acetone) to produce homogeneous SFNs incorporating increasing amounts of Fe2O3 (SFNs-Fe), detectable by Magnetic Resonance Imaging (MRI), and loaded with curcumin as a model lipophilic drug. SFNs-Fe were characterized by a homogeneous distribution of the combined materials and showed an actual Fe2O3 loading close to the theoretical one. The amount of Fe2O3 incorporated affected the physical-chemical properties of SFNs-Fe, such as polymer matrix compactness, mean diameter and drug release mechanism. All formulations were cytocompatible; curcumin encapsulation mitigated its cytotoxicity, and iron oxide incorporation did not impact cell metabolic activity but affected cellular uptake in vitro. SFNs-Fe proved optimal for biodistribution studies, as MRI showed significant nanoparticle retention at the administration site, supporting their potential for locoregional cancer therapy. Finally, technical and economic challenges in SFN production were overcome using a GMP-compliant microfluidic scalable technology, which optimized preparation to produce smaller particle sizes compared to manual methods and reduced acetone usage, thus offering environmental and economic benefits. Moreover, enabling large-scale production of GMP-like SFNs, this represents a considerable step forward for their application in the clinic.

Recent progress and current status of surface engineered magnetic nanostructures in cancer theranostics

Cancer theranostic is the combination of diagnosis and therapeutic modalities for cancer treatment. It realizes a more flexible, precise and non-invasive treatment of patients. In this aspect, magnetic nanostructures (MNSs) have gained paramount importance and revolutionized the cancer management due to their unique physicochemical properties and inherent magnetic characteristics. MNSs have amazing theranostic ability starting from drug delivery to magnetic hyperthermia and magnetic resonance imaging to multimodal imaging in association with radioisotopes or fluorescent probes. Precise regulation over the synthetic process and their consequent surface functionalization makes them even more fascinating. The ultimate goal is to develop a platform that combines multiple diagnostic and therapeutic functionalities based on MNSs. This perspective has provided an overview of the state-of-art of theranostic applications of MNSs. Special emphasis has been dedicated towards the importance of synthetic approaches of MNSs as well as their subsequent surface engineering and integration with biological/therapeutic molecules that decide the final outcomes of the efficacy of MNSs in theranostic applications. Moreover, the recent advancements, opportunities and allied challenges towards clinical applications of MNSs in cancer management have been demonstrated.

Synthesis of dumbbell-like heteronanostructures encapsulated in ferritin protein: Towards multifunctional protein based opto-magnetic nanomaterials for biomedical theranostic

Dumbbell-like hetero nanostructures based on gold and iron oxides is a promising material for biomedical applications, useful as versatile theranostic agents due the synergistic effect of their optical and magnetic properties. However, achieving precise control on their morphology, size dispersion, colloidal stability, biocompatibility and cell targeting remains as a current challenge. In this study, we address this challenge by employing biomimetic routes, using ferritin protein nanocages as template for these nanoparticles' synthesis. We present the development of an opto-magnetic nanostructures using the ferritin protein, wherein gold and iron oxide nanostructures were produced within its cavity. Initially, we investigated the synthesis of gold nanostructures within the protein, generating clusters and plasmonic nanoparticles. Subsequently, we optimized the conditions for the superparamagnetic nanoparticles synthesis through controlled iron oxidation, thereby enhancing the magnetic properties of the resulting system. Finally, we produce magnetic nanoparticles in the protein with gold clusters, achieving the coexistence of both nanostructures within a single protein molecule, a novel material unprecedented to date. We observed that factors such as temperature, metal/protein ratios, pH, dialysis, and purification processes all have an impact on protein recovery, loading efficiency, morphology, and nanoparticle size. Our findings highlight the development of ferritin-based nanomaterials as versatile platforms for potential biomedical use as multifunctional theranostic agents.

Iron Oxide Nanoparticles: Parameters for Optimized Photoconversion Efficiency in Synergistic Cancer Treatment

Photothermal therapy (PTT) can overcome cancer treatment resistance by enhancing the cell membrane permeability, facilitating drug accumulation, and promoting drug release within the tumor tissue. Iron oxide nanoparticles (IONPs) have emerged as effective agents for PTT due to their unique properties and biocompatibility. Approved for the treatment of anemia, as MRI contrast agents, and as magnetic hyperthermia mediators, IONPs also offer excellent light-to-heat conversion and can be manipulated using external magnetic fields for targeted accumulation in specific tissue. Optimizing parameters such as the laser wavelength, power density, shape, size, iron oxidation state, functionalization, and concentration is crucial for IONPs' effectiveness. In addition to PTT, IONPs enhance other cancer treatment modalities. They improve tumor oxygenation, enhancing the efficacy of radiotherapy and photodynamic therapy. IONPs can also trigger ferroptosis, a programmed cell death pathway mediated by iron-dependent lipid peroxidation. Their magneto-mechanical effect allows them to exert a mechanical force on cancer cells to destroy tumors, minimizing the damage to healthy tissue. This review outlines strategies for the management of the photothermal performance and PTT efficiency with iron oxide nanoparticles, as well as synergies with other cancer therapies.

Magnetic-driven Interleukin-4 internalization promotes magnetic nanoparticle morphology and size-dependent macrophage polarization

Macrophages are known to depict two major phenotypes: classically activated macrophages (M1), associated with high production of pro-inflammatory cytokines, and alternatively activated macrophages (M2), which present an anti-inflammatory function. A precise control over M1-M2 polarization is a promising strategy in therapeutics to modulate both tissue regeneration and tumor progression processes. However, this is not a simple task as macrophages behave differently depending on the microenvironment. In agreement with this, non-consistent data have been reported regarding macrophages response to magnetic iron oxide nanoparticles (MNPs). To investigate the impact of both tissue microenvironment and MNPs properties on the obtained macrophage responses, single-core (SC) and multi-core (MC) citrate coated MNPs, are synthesized and, afterwards, loaded with a macrophage polarization trigger, IL-4. The developed MNPs are then tested in macrophages subjected to different stimuli. We demonstrate that macrophages treated with low concentrations of MNPs behave differently depending on the polarization stage independently of the concentration of iron. Moreover, we find out that MNPs size and morphology determines the effect of the IL-4 loaded MNPs on M1 macrophages, since IL-4 loaded SC MNPs favor the polarization of M1 macrophages towards M2 phenotype, while IL-4 loaded MC MNPs further stimulate the secretion of pro-inflammatory cytokines.

High-Performance T1-T2 Dual-Modal MRI Contrast Agents through Interface Engineering

Iron oxide nanoparticles (IONPs) have been developed as contrast agents for T₁- or T₂-weighted magnetic resonance imaging (MRI) on account of their excellent physicochemical and biological properties. However, general strategies to improve longitudinal relaxivity (r₁) often decrease transverse relaxivity (r₂), thus synchronously strengthening the T₁ and T₂ enhancement effect of IONPs remains a challenge. Here, we report interface regulation and size tailoring of a group of FePt@Fe₃O₄ core-shell nanoparticles (NPs), which possess high r₁ and r₂ relaxivities. The increase of r₁ and r₂ is due to the enhancement of the saturation magnetization (M_s), which is a result of the strengthened exchange coupling across the core-shell interface. In vivo subcutaneous tumor study and brain glioma imaging revealed that FePt@Fe₃O₄ NPs can serve as a favorable T₁-T₂ dual-modal contrast agent. We envision that the core-shell NPs, through interface engineering, have great potential in preclinical and clinical MRI applications.

Poly(acrylic acid-co-acrylamide)/Polyacrylamide pIPNs/Magnetite Composite Hydrogels: Synthesis and Characterization

Novel composite hydrogels based on poly(acrylic acid-co-acrylamide)/polyacrylamide pseudo-interpenetrating polymer networks (pIPNs) and magnetite were prepared via in situ precipitation of Fe3+/Fe2+ ions within the hydrogel structure. The magnetite formation was confirmed by X-ray diffraction, and the size of the magnetite crystallites was shown to depend on the hydrogel composition: the crystallinity of the magnetite particles increased in line with PAAM content within the composition of the pIPNs. The Fourier transform infrared spectroscopy revealed an interaction between the hydrogel matrix, via the carboxylic groups of polyacrylic acid, and Fe ions, which strongly influenced the formation of the magnetite articles. The composites' thermal properties, examined using differential scanning calorimetry (DSC), show an increase in the glass transition temperature of the obtained composites, which depends on the PAA/PAAM copolymer ratio in the pIPNs' composition. Moreover, the composite hydrogels exhibit pH and ionic strength responsiveness as well as superparamagnetic properties. The study revealed the potential of pIPNs as matrices for controlled inorganic particle deposition as a viable method for the production of polymer nanocomposites.

Optimization of magnetic nanoparticles for engineering erythrocytes as theranostic agents

The application of superparamagnetic iron oxide nanoparticles (SPIONs) in drug delivery, magnetic resonance imaging, cell tracking, and hyperthermia has been long exploited regarding their inducible magnetic properties. Nevertheless, SPIONs remain rapidly cleared from the circulation by the reticuloendothelial system (RES) or mononuclear phagocyte system, with uptake dependent on several factors such as the hydrodynamic diameter, electrical charge and surface coating. This rapid clearance of SPION-based theranostic agents from circulation is one of the main challenges hampering the medical applications that differ from RES targeting. This work proposes a strategy to render biocompatible SPIONs through their encapsulation in the red blood cells (RBCs). In this work, the research has been focused on the multi-step optimization of chemical synthesis of magnetic nanoparticles (MNPs), precisely iron oxide nanoparticles (IONPs) and zinc manganese-ferrite nanoparticles (Zn/Mn FNPs), for encapsulation in human and murine RBCs. The encapsulation through the transient opening of RBC membrane pores requires extensive efforts to deliver high-quality nanoparticles in terms of chemical properties, morphology, stability and biocompatibility. After reaching this goal, in vitro experiments were performed with selected nanomaterials to investigate the potential of engineered MNP-RBC constructs in theranostic approaches.

Role of Dipolar Interactions on the Determination of the Effective Magnetic Anisotropy in Iron Oxide Nanoparticles

Challenging magnetic hyperthermia (MH) applications of immobilized magnetic nanoparticles require detailed knowledge of the effective anisotropy constant (K_eff ) to maximize heat release. Designing optimal MH experiments entails the precise determination of magnetic properties, which are, however, affected by the unavoidable concurrence of magnetic interactions in common experimental conditions. In this work, a mean-field energy barrier model (ΔE), accounting for anisotropy (E_A ) and magnetic dipolar (E_D ) energy, is proposed and used in combination with AC measurements to a specifically developed model system of spherical magnetic nanoparticles with well-controlled silica shells, acting as a spacer between the magnetic cores. This approach makes it possible to experimentally demonstrate the mean field dipolar interaction energy prediction with the interparticle distance, d_ij , E_D ≈ 1/d_ij ³ and obtain the E_A as the asymptotic limit for very large d_ij . In doing so, K_eff uncoupled from interaction contributions is obtained for the model system (iron oxide cores with average sizes of 8.1, 10.2, and 15.3 nm) revealing to be 48, 23, and 11 kJ m^-3 , respectively, close to bulk magnetite/maghemite values and independent from the specific spacing shell thicknesses selected for the study.

Iron Oxide Nanoparticles: A Review on the Province of Its Compounds, Properties and Biological Applications

Materials science and technology, with the advent of nanotechnology, has brought about innumerable nanomaterials and multi-functional materials, with intriguing yet profound properties, into the scientific realm. Even a minor functionalization of a nanomaterial brings about vast changes in its properties that could be potentially utilized in various applications, particularly for biological applications, as one of the primary needs at present is for point-of-care devices that can provide swifter, accurate, reliable, and reproducible results for the detection of various physiological conditions, or as elements that could increase the resolution of current bio-imaging procedures. In this regard, iron oxide nanoparticles, a major class of metal oxide nanoparticles, have been sweepingly synthesized, characterized, and studied for their essential properties; there are 14 polymorphs that have been reported so far in the literature. With such a background, this review's primary focus is the discussion of the different synthesis methods along with their structural, optical, magnetic, rheological and phase transformation properties. Subsequently, the review has been extrapolated to summarize the effective use of these nanoparticles as contrast agents in bio-imaging, therapeutic agents making use of its immune-toxicity and subsequent usage in hyperthermia for the treatment of cancer, electron transfer agents in copious electrochemical based enzymatic or non-enzymatic biosensors and bactericidal coatings over biomaterials to reduce the biofilm formation significantly.

Emergent magnetism and exchange bias effect in iron oxide nanocubes with tunable phase and size

We report a systematic investigation of the magnetic properties including the exchange bias (EB) effect in an iron oxide nanocube system with tunable phase and average size (10, 15, 24, 34, and 43 nm). X-ray diffraction and Raman spectroscopy reveal the presence of Fe₃O₄, FeO, andα-Fe₂O₃phases in the nanocubes, in which the volume fraction of each phase varies depending upon particle size. While the Fe₃O₄phase is dominant in all and tends to grow with increasing particle size, the FeO phase appears to coexist with the Fe₃O₄phase in 10, 15, and 24 nm nanocubes but disappears in 34 and 43 nm nanocubes. The nanocubes exposed to air resulted in anα-Fe₂O₃oxidized surface layer whose thickness scaled with particle size resulting in a shell made ofα-Fe₂O₃phase and a core containing Fe₃O₄or a mixture of both Fe₃O₄and FeO phases. Magnetometry indicates that the nanocubes undergo Morin (of theα-Fe₂O₃phase) and Verwey (of the Fe₃O₄phase) transitions at ∼250 K and ∼120 K, respectively. For smaller nanocubes (10, 15, and 24 nm), the EB effect is observed below 200 K, of which the 15 nm nanocubes showed the most prominent EB with optimal antiferromagnetic (AFM) FeO phase. No EB is reported for larger nanocubes (34 and 43 nm). The observed EB effect is ascribed to the strong interfacial coupling between the ferrimagnetic (FiM) Fe₃O₄phase and AFM FeO phase, while its absence is related to the disappearance of the FeO phase. The Fe₃O₄/α-Fe₂O₃(FiM/AFM) interfaces are found to have negligible influence on the EB. Our findings shed light on the complexity of the EB effect in mixed-phase iron oxide nanosystems and pave the way to design exchange-coupled nanomaterials with desirable magnetic properties for biomedical and spintronic applications.

Fluorescent Single-Core and Multi-Core Nanoprobes as Cell Trackers and Magnetic Nanoheaters

Iron oxide magnetic nanoparticles (MNPs) have been widely studied due to their versatility for diagnosis, tracking (magnetic resonance imaging (MRI)) and therapeutic (magnetic hyperthermia and drug delivery) applications. In this work, iron oxide MNPs with different single-core (8–40 nm) and multi-core (140–200 nm) structures were synthesized and functionalized by organic and inorganic coating materials, highlighting their ability as magnetic nanotools to boost cell biotechnological procedures. Single core Fe3O4@PDA, Fe3O4@SiO2-FITC-SiO2 and Fe3O4@SiO2-RITC-SiO2 MNPs were functionalized with fluorescent components with emission at different wavelengths, 424 nm (polydopamine), 515 (fluorescein) and 583 nm (rhodamine), and their ability as transfection and imaging agents was explored with HeLa cells. Moreover, different multi-core iron oxide MNPs (Fe3O4@CS, Fe3O4@SiO2 and Fe3O4@Citrate) coated with organic (citrate and chitosan, CS) and inorganic (silica, SiO2) shells were tested as efficient nanoheaters for magnetic hyperthermia applications for mild thermal heating procedures as an alternative to simple structures based on single-core MNPs. This work highlights the multiple abilities offered by the synergy of the use of external magnetic fields applied on MNPs and their application in different biomedical approaches.

Tannic Acid Coating Augments Glioblastoma Cellular Uptake of Magnetic Nanoparticles with Antioxidant Effects

Coating of nanoparticles with gallates renders them antioxidant and enhances cellular internalization. In this study, (amino)silica magnetic particles modified with tannic acid (TA) and optionally with chitosan (CS) were developed, and their physicochemical properties and antioxidant activity were evaluated. The results demonstrated that the TA-modified aminosilica-coated particles, as well as the silica-coated particles with a double TA layer, exhibited high antioxidant activity, whereas the silica-coated particles with no or only a single TA layer were well-internalized by LN-229 cells. In addition, a magnet placed under the culture plates greatly increased the cellular uptake of all TA-coated magnetic nanoparticles. The coating thus had a considerable impact on nanoparticle–cell interactions and particle internalization. The TA-coated magnetic nanoparticles have great potential as intracellular carriers with preserved antioxidant activity.

Photochemical reduction of nanocrystalline maghemite to magnetite

We present a method for thephotochemical conversion of the inverse spinel iron oxides in which the mixed-valent magnetite phase (Fe₃O₄) is accessed from the maghemite phase (γ-Fe₂O₃) via a stable, colloidal nanocrystal-to-nanocrystal transformation. Anaerobic UV-irradiation of colloidal γ-Fe₂O₃ nanocrystals in the presence of ethanol as a sacrificial reductant yields reduction of some Fe³⁺ to Fe²⁺, resulting in a topotactic reduction of γ-Fe₂O₃ to Fe₃O₄. This reduction is evidenced by the emergence of charge-transfer absorption and increased d-spacing in UV-irradiated nanocrystals. Redox titrations reveal that ∼43% of Fe in <d> = 4.8 nm nanocrystals can be reduced with this method and comparison of optical data indicates similar reduction levels in <d> = 7.3 and 9.0 nm nanocrystals. Addition of excess acetaldehyde during photoreduction shows that the extent of reduction is likely pinned by the hydrogenation of acetaldehyde back to ethanol and can be increased with the use of an alkylborohydride sacrificial reductant. Photochemical reduction is accompanied by increased magnetization and emergence of magnetic features characteristic of Fe₃O₄. Overall, this work provides a reversible, post-synthetic strategy to obtain Fe₃O₄ nanocrystals with well-controlled Fe²⁺ compositions.

Iron Oxide Nanoparticles as T1 Contrast Agents for Magnetic Resonance Imaging: Fundamentals, Challenges, Applications, and Prospectives

Gadolinium-based chelates are a mainstay of contrast agents for magnetic resonance imaging (MRI) in the clinic. However, their toxicity elicits severe side effects and the Food and Drug Administration has issued many warnings about their potential retention in patients' bodies, which causes safety concerns. Iron oxide nanoparticles (IONPs) are a potentially attractive alternative, because of their nontoxic and biodegradable nature. Studies in developing IONPs as T1 contrast agents have generated promising results, but the complex, interrelated parameters influencing contrast enhancement make the development difficult, and IONPs suitable for T1 contrast enhancement have yet to make their way to clinical use. Here, the fundamental principles of MRI contrast agents are discussed, and the current status of MRI contrast agents is reviewed with a focus on the advantages and limitations of current T1 contrast agents and the potential of IONPs to serve as safe and improved alternative to gadolinium-based chelates. The past advances and current challenges in developing IONPs as a T1 contrast agent from a materials science perspective are presented, and how each of the key material properties and environment variables affects the performance of IONPs is assessed. Finally, some potential approaches to develop high-performance and clinically relevant T1 contrast agents are discussed.

Effective production of multifunctional magnetic-sensitive biomaterial by an extrusion-based additive manufacturing technique

A calcium phosphate (CaP)-based scaffold used as synthetic bone grafts, which smartly combines precise dimensions, controlled porosity and therapeutic functions, presents benefits beyond those offered by conventional practices, although its fabrication is still a challenge. The sintering step normally required to improve the strength of the ceramic scaffolds precludes the addition of any biomolecules or functional particles before this stage. This study presents a proof of concept of multifunctional CaP-based scaffolds, fabricated by additive manufacturing from an innovative ink composition, with potential for bone regeneration, cancer treatment by local magnetic hyperthermia and drug delivery platforms. Highly loaded inks comprising iron-doped hydroxyapatite and β-tricalcium phosphate powders suspended in a chitosan-based solution, in the presence of levofloxacin (LEV) as model drug and magnetic nanoparticles (MNP), were developed. The sintering step was removed from the production process, and the integrity of the printed scaffolds was assured by the polymerization capacity of the ink composite, using genipin as a crosslinking agent. The effects of MNP and LEV on the inks' rheological properties, as well as on the mechanical and structural behaviour of non-doped and iron-doped scaffolds, were evaluated. Magnetic and magneto-thermal response, drug delivery and biological performance, such as cell proliferation in the absence and presence of an applied magnetic field, were also assessed. The addition of a constant amount of MNP in the iron-doped and non-doped CaP-based inks enhances their magnetic response and induction heating, with these effects more pronounced for the iron-doped CaP-based ink. These results suggest a synergistic effect between the iron-doped CaP-based powders and the MNP due to ferro/ferrimagnetic interactions. Furthermore, the iron presence enhances human mesenchymal stem cell metabolic activity and proliferation.

Correlation between physicochemical properties of superparamagnetic iron oxide nanoparticles and their reactivity with hydrogen peroxide

The present study focuses on the effects of the physicochemical properties of superparamagnetic PEG-modified, positively charged, and negatively charged iron oxide nanoparticles (SPIONs) on their reactivity with hydrogen peroxide. Our hypothesis was that the reactivity of SPIONs in this reaction would depend on their surface properties. The comparative study of the nanoparticles with DLS and TEM revealed the average sizes of PEG-modified, positively charged, and negatively charged SPIONs. We observed that the reactivity of negatively charged SPIONs with hydrogen peroxide was less than that of positively charged SPIONs and that of these second nanoparticles was less than that of PEG-modified SPIONs. This difference in the reactivity of these SPIONs with hydrogen peroxide was attributed to the presence of carboxyl or amine groups on their surface. However, the values of the rate constants of the reactions of PEG-modified, positively charged, and negatively charged SPIONs with hydrogen peroxide showed that the reaction of negatively charged SPIONs with hydrogen peroxide was more rapid than that of PEG-modified SPIONs and the reaction of these second SPIONs with hydrogen peroxide was more rapid than that of positively charged SPIONs. The surface study of the SPIONs using XPS showed that the high-resolution spectra of these nanoparticles changed after reaction with hydrogen peroxide, which indicates their surface modifications. These investigations can help develop more appropriate nanoparticles with controlled physicochemical properties.

Cerium Oxide-Decorated γ-Fe2O3 Nanoparticles: Design, Synthesis and in vivo Effects on Parameters of Oxidative Stress

Magnetic γ-Fe₂O₃/CeO_x nanoparticles were obtained by basic coprecipitation/oxidation of iron chlorides with hydrogen peroxide, followed by precipitation of Ce(NO₃)₃ with ammonia. The appearance of CeO_x on the magnetic particle surface was confirmed by X-ray photoelectron spectroscopy (XPS), powder X-ray diffraction (XRD), and elemental analysis; a magnetometer was used to measure the magnetic properties of γ-Fe₂O₃/CeO_x. The relatively high saturation magnetization of the particles (41.1 A·m²/kg) enabled magnetic separation. The surface of γ-Fe₂O₃/CeO_x particles was functionalized with PEG-neridronate of two different molecular weights to ensure colloidal stability and biocompatibility. The ability of the particles to affect oxidative stress in hereditary hypertriglyceridemic (HHTg) rats was tested by biological assay of the liver, kidney cortex, and brain tissues. An improvement was observed in both enzymatic [superoxide dismutase (SOD), catalase (CAT), and glutathione peroxidase (GPx)] and non-enzymatic (reduced (GSH) and oxidized (GSSG) glutathione) levels of antioxidant defense and lipid peroxidation parameters [4-hydroxynonenal (4-HNE) and malondialdehyde (MDA)]. The results corresponded with chemical determination of antioxidant activity based on 2,2-diphenyl-1-picrylhydrazyl (DPPH) assay, proving that in the animal model γ-Fe₂O₃/CeO_x@PEG_2,000 nanoparticles effectively scavenged radicals due to the presence of cerium oxide, in turn decreasing oxidative stress. These particles may therefore have the potential to reduce disorders associated with oxidative stress and inflammation.

Novel Polymeric Micelles-Coated Magnetic Nanoparticles for In Vivo Bioimaging of Liver: Toxicological Profile and Contrast Enhancement

Magnetic nanoparticles are intensively studied for magnetic resonance imaging (MRI) as contrast agents but yet there remained some gaps regarding their toxicity potential and clinical implications of their biodistribution in organs. This study presents the effects induced by magnetite nanoparticles encapsulated in polymeric micelles (MNP-DSPE-PEG) on biochemical markers, metabolic functions, and MRI signal in CD1 mice liver. Three groups of animals, one control and the other ones injected with a suspension of five, respectively, 15 mg Fe/kg bw nanoparticles, were monitored up to 14 days. The results indicated the presence of MNP-DSPE-PEG in the liver in the first two days of the experiment. The most significant biochemical changes also occurred in the first 3 days after exposure when the most severe histological changes were observed. The change of the MRI signal intensity on the T2-weighted images and increased transverse relaxation rates R2 in the liver were observed after the first minutes from the nanoparticle administration. The study shows that the alterations of biomarkers level resulting from exposure to MNP-DSPE-PEG are restored in time in mice liver. This was associated with a significant contrast on T2-weighted images and made us conclude that these nanoparticles might be potential candidates for use as a contrast agent in liver medical imaging.

Magnetic Nanoparticles Coated with (R)-9-Acetoxystearic Acid for Biomedical Applications

The well-known ability to selectively drive nanomagnetic materials coated with anticancer drugs into tumor cells suggested the synthesis and the characterization of magnetic nanoparticles (MNPs) functionalized with (R)-9-acetoxystearic acid, the acetic ester of (R)-9-hydroxystearic acid (9-HSA), an antiproliferative agent active against different cancer cells. The acyl chloride of (R)-9-acetoxystearic acid, synthesized in two steps from 9-HSA, was reacted with (3-aminopropyl)triethoxysilane, chosen as a linker between MNPs and the stearyl moiety. In the last step, the novel amide was bound to magnetite NPs by reaction with silyl groups. A detailed structural, chemical, and magnetic characterization of the obtained material proved that it possesses properties in agreement with the requirements for drug delivery, opening the possibility to further insights focused on the 9-HSA biomedical applications.

Controlled Synthesis and Characterization of Micrometric Single Crystalline Magnetite With Superparamagnetic Behavior and Cytocompatibility/Cytotoxicity Assessments

A new class of magnetite (Fe₃O₄) particles, coined as “Single Crystalline Micrometric Iron Oxide Particles” (SCMIOPs), were obtained by hydrothermal synthesis. Both the single Fe₃O₄ phase content and the particle sizes range, from 1 µm to 30 µm, can be controlled by synthesis. The notable finding states that these particles exhibit vanishing remanent magnetization (σr=0.28 emu/g) and coercive force (Hc=1.5 Oe), which indicate a superparamagnetic-like behavior (unexpected at micrometric particles size), and remarkably high saturation magnetization (σs=95.5 emu/g), what ensures strong magnetic response, and the lack of agglomeration after the magnetic field removal. These qualities make such particles candidates for biomedical applications, to be used instead of magnetic nanoparticles which inevitably involve some drawbacks like aglommeration and insufficient magnetic response. In this sense, cytocompatibility/cytotoxicity tests were performed on human cells, and the results have clearly indicated that SCMIOPs are cytocompatible for healthy cell lines HaCaT (human keratinocytes) and HEMa (primary epidermal melanocytes) and cytotoxic for neoplastic cell lines A375 (human melanoma) and B164A5 (murine melanoma) in a dose-dependent manner.

[T1-weighted magnetic resonance imaging contrast agents and their theranostic nanoprobes]

Magnetic resonance imaging (MRI) is an important imaging modality for clinical disease diagnosis, and nearly 50% of clinical MRI examinations require contrast agents to enhance the diagnostic sensitivity. This review provides a summary of the major MRI contrast agents and their classification, and the advantages and limits of the commercially available MRI contrast agents, and elaborates on the exceedingly small magnetic iron oxide nanoparticles (ES-MIONs), dotted core-shell iron and gadolinium hybrid nanoparticles (FeGd-HN) and exceedingly small gadolinium oxide nanoparticles (ES-GON). These nanoparticles can greatly improve the efficiency of T₁-weighted MRI due to their high r₁ value and low r₂/r₁ ratio, and are expected to be translated into clinical contrast agents for T₁-weighted MRI. The authors also review the diagnostic and therapeutic integration system that combines MRI contrast agents with various tumor therapies, such as MRI-guided ferroptosis therapy, radiosensitization therapy, and photothermal therapy, which allow efficient treatment as well as real-time monitoring of tumors and serve as potential cancer therapy strategies. The possible future research directions in the field of MRI-based multifunctional diagnostic and therapeutic formulations are also discussed.

Size-isolation of superparamagnetic iron oxide nanoparticles improves MRI, MPI and hyperthermia performance

Superparamagnetic iron oxide nanoparticles (SPION) are extensively used for magnetic resonance imaging (MRI) and magnetic particle imaging (MPI), as well as for magnetic fluid hyperthermia (MFH). We here describe a sequential centrifugation protocol to obtain SPION with well-defined sizes from a polydisperse SPION starting formulation, synthesized using the routinely employed co-precipitation technique. Transmission electron microscopy, dynamic light scattering and nanoparticle tracking analyses show that the SPION fractions obtained upon size-isolation are well-defined and almost monodisperse. MRI, MPI and MFH analyses demonstrate improved imaging and hyperthermia performance for size-isolated SPION as compared to the polydisperse starting mixture, as well as to commercial and clinically used iron oxide nanoparticle formulations, such as Resovist® and Sinerem®. The size-isolation protocol presented here may help to identify SPION with optimal properties for diagnostic, therapeutic and theranostic applications.

Effect of Polymer Surface Modification of Superparamagnetic Iron Oxide Nanoparticle Dispersions in High Salinity Environments

Superparamagnetic nanoparticles (SPIONs) can be used as nuclear magnetic resonance (NMR) signal enhancement agents for petroleum exploration. This enhancement effect is uniform if SPIONs are monodisperse in size and in composition; yet it is challenging to synthesize monodisperse particles that do not aggregate in high salinity petroleum brine. Here, we report a method to synthesize individual SPIONs coated with tunable surface coating densities of poly(2-acrylamido-2-methyl-1-propanesulfonic acid (pAMPS) with a catechol end-group (pAMPS*). To establish parameters under which pAMPS*-coated SPIONS do not aggregate, we compared computational predictions with experimental results for variations in pAMPS* chain length and surface coverage. Using this combined theoretical and experimental approach, we show that singly dispersed SPIONs remained stabilized in petroleum brine for up to 75 h with high surface density pAMPS*.

Synthesis of Sub 3 nm-Sized Uniform Magnetite Nanoparticles Using Reverse Micelle Method for Biomedical Application

We report a synthetic method for small and uniform Fe3O4 (magnetite) nanoparticles under mild conditions. Spherical sub-3 nm-sized magnetite nanoparticles were prepared via reverse micelles composed of oleylamine, F127, xylene, and water for the reaction of iron(III) stearate with hydrazine at a reaction temperature of 90 °C in air atmosphere. These synthesized magnetite nanoparticles exhibited good size uniformity. By controlling experimental conditions, we could easily control both size and size uniformity of these magnetite nanoparticles. We further investigated whether Fe3O4 could be used in biomedical applications. Cytotoxicity of Fe3O4 was evaluated with human adipose-derived stem cells (hADSCs). Our results showed that the number of hADSCs did not significantly decrease when these cells were treated with Fe3O4 nanoparticles at a concentration of up to 9 μg/mL. Apoptotic activity and cell proliferation of hADSCs treated with Fe3O4 nanoparticles were similar to those of hADSCs without any treatment. This novel method could be used for synthesizing uniform and biocompatible Fe3O4 nanoparticles with further biomedical applications.

Use of nanoparticles in skeletal tissue regeneration and engineering

Bone and osteochondral defects represent one of the major causes of disabilities in the world. Derived from traumas and degenerative pathologies, these lesions cause severe pain, joint deformity, and loss of joint motion. The standard treatments in clinical practice present several limitations. By producing functional substitutes for damaged tissues, tissue engineering has emerged as an alternative in the treatment of defects in the skeletal system. Despite promising preliminary clinical outcomes, several limitations remain. Nanotechnologies could offer new solutions to overcome those limitations, generating materials more closely mimicking the structures present in naturally occurring systems. Nanostructures comparable in size to those appearing in natural bone and cartilage have thus become relevant in skeletal tissue engineering. In particular, nanoparticles allow for a unique combination of approaches (e.g. cell labelling, scaffold modification or drug and gene delivery) inside single integrated systems for optimized tissue regeneration. In the present review, the main types of nanoparticles and the current strategies for their application to skeletal tissue engineering are described. The collection of studies herein considered confirms that advanced nanomaterials will be determinant in the design of regenerative therapeutic protocols for skeletal lesions in the future.

Gas Diffusion Electrodes on the Electrosynthesis of Controllable Iron Oxide Nanoparticles

The electrosynthesis of iron oxide nanoparticles offers a green route, with significant energy and environmental advantages. Yet, this is mostly restricted by the oxygen solubility in the electrolyte. Gas-diffusion electrodes (GDEs) can be used to overcome that limitation, but so far they not been explored for nanoparticle synthesis. Here, we develop a fast, environmentally-friendly, room temperature electrosynthesis route for iron oxide nanocrystals, which we term gas-diffusion electrocrystallization (GDEx). A GDE is used to generate oxidants and hydroxide in-situ, enabling the oxidative synthesis of a single iron salt (e.g., FeCl₂) into nanoparticles. Oxygen is reduced to reactive oxygen species, triggering the controlled oxidation of Fe²⁺ to Fe³⁺, forming Fe_3−xO_4−x (0 ≤ x ≤ 1). The stoichiometry and lattice parameter of the resulting oxides can be controlled and predictively modelled, resulting in highly-defective, strain-heavy nanoparticles. The size of the nanocrystals can be tuned from 5 nm to 20 nm, with a large saturation magnetization range (23 to 73 A m² kg⁻¹), as well as minimal coercivity (~1 kA m⁻¹). Using only air, NaCl, and FeCl₂, a biocompatible approach is achieved, besides a remarkable level of control over key parameters, with a view on minimizing the addition of chemicals for enhanced production and applications.

Effect of Functionalized Graphene Nanoplatelets on the Delamination-Buckling and Delamination Propagation Resistance of 3D Fiber-Metal Laminates Under Different Loading Rates

This paper presents an investigation into the effect of graphene nanoplatelets (GNPs) as a means of improving the impact buckling performance and delamination propagation resistance of a recently developed 3D fiber-metal laminate (3D-FML). One of the highlights of the investigation is the examination of the performance of the GNP-reinforced resin at a sub-freezing temperature (−50 °C). 3D-FML beam specimens were subjected to axial impact of various intensities at room-temperature, while they were subjected to quasi-static axial compression load at the sub-freezing temperature. Moreover, the influence of two different surface preparation methods on the performance of the metallic/FRP interfaces of the hybrid system was also investigated in this study. Although the inclusion of the GNPs in the resin resulted in some gain in the buckling capacity of the 3D-FML, nevertheless, the results revealed that the lack of adequate chemical bond between the GNP-reinforced resin and the magnesium skins of the hybrid material system significantly limited the potential influence of the GNPs. Therefore, a cost-effective and practical alternative is presented that results in a significant improvement in the interfacial capacity.

Fe3O4@C Matrix with Tailorable Adsorption Capacities for Paracetamol and Acetylsalicylic Acid: Synthesis, Characterization, and Kinetic Modeling

In this study Fe₃O₄@C matrix was obtained by combustion method and used hereafter as adsorbent for paracetamol and acetylsalicylic acid removal from aqueous solutions. The Fe₃O₄@C matrix was characterized by electronic microscopy, X-ray diffraction, thermal analysis, Fourier-transform infrared spectroscopy, and magnetic measurements. Two kinetic models of pseudo first-order and pseudo-second-order for both paracetamol and acetylsalicylic acid were studied. The experimental data were investigated by Langmuir, Freundlich, and Redlich–Peterson adsorption isotherm models. The adsorption followed the Redlich–Peterson and pseudo-second-order models with correlation coefficients R² = 0.98593 and R² = 0.99996, respectively, for the adsorption of paracetamol; for the acetylsalicylic acid, the adsorption followed the Freundlich and pseudo-second-order model, with correlation coefficients R² = 0.99421 and R² = 0.99977, respectively. The equilibrium was quickly reached after approximately 1h for the paracetamol adsorption and approximately 2h for acetylsalicylic acid adsorption. According to the Langmuir isotherm, the maximum adsorption capacity of the magnetic matrix was 142.01 mg·g⁻¹ for the retention of paracetamol and 234.01 mg·g⁻¹ for the retention of acetylsalicylic acid. The benefits of using the Fe₃O₄@C matrix are the low cost of synthesis and its easy and fast separation from solution by using an NdBFe magnet.

Enzyme-catalysed biodegradation of carbon dots follows sequential oxidation in a time dependent manner

Carbon dots (CDs) have recently garnered significant attention owing to their excellent luminescence properties, thereby demonstrating a variety of applications in in vitro and in vivo imaging. Understanding the long-term metabolic fate of these agents in a biological environment is the focus of this work. Here we show that the CDs undergo peroxide catalysed degradation in the presence of lipase. Our results indicate that differently charged CD species exhibit unique degradation kinetics upon being subjected to enzyme oxidation. Furthermore, this decomposition correlates with the relative accessibility of the enzymatic molecule. Using multiple physico-chemical characterization studies and molecular modelling, we confirmed the interaction of passivating surface abundant molecules with the enzyme. Finally, we have identified hydroxymethyl furfural as a metabolic by-product of the CDs used here. Our results indicate the possibility and a likely mechanism for complete CD degradation in living systems that can pave the way for a variety of biomedical applications.

Targeted T1 Magnetic Resonance Imaging Contrast Enhancement with Extraordinarily Small CoFe2O4 Nanoparticles

Extraordinarily small (2.4 nm) cobalt ferrite nanoparticles (ESCIoNs) were synthesized by a one-pot thermal decomposition approach to study their potential as magnetic resonance imaging (MRI) contrast agents. Fine size control was achieved using oleylamine alone, and annular dark-field scanning transmission electron microscopy revealed highly crystalline cubic spinel particles with atomic resolution. Ligand exchange with dimercaptosuccinic acid rendered the particles stable in physiological conditions with a hydrodynamic diameter of 12 nm. The particles displayed superparamagnetic properties and a low r₂/ r₁ ratio suitable for a T₁ contrast agent. The particles were functionalized with bile acid, which improved biocompatibility by significant reduction of reactive oxygen species generation and is a first step toward liver-targeted T₁ MRI. Our study demonstrates the potential of ESCIoNs as T₁ MRI contrast agents.

Smart Bacterial Magnetic Nanoparticles for Tumor-Targeting Magnetic Resonance Imaging of HER2-Positive Breast Cancers

Supersensitive magnetic resonance (MR) imaging requires contrast with extremely high r₂ values. However, synthesized magnetic nanoparticles generally have a relatively low r₂ relaxivity. Magnetosomes with high saturation magnetization and good biocompatibility have shown potential values as MR imaging contrast agents. Magnetosomes that target human epidermal growth factor receptor-2 (HER2) were prepared using genetic technology and low-frequency sonication. Anti-HER2 affibody of the ability to target HER2 was displayed on the membrane surface of the magnetosomes through the anchor protein MamC, allowing the bacterial nanoparticles to target tumors overexpressing HER2. The prepared nanoparticles exhibited a very high relaxivity of 599.74 mM^-1 s^-1 and better dispersion, and their ability to target HER2 was demonstrated both in vitro and in vivo. Also, the HER2-targeting magnetosomes significantly enhanced the MR imaging of orthotopic breast cancer models with or without HER2 expression using a 7.0 T scanner. In particular, tumors overexpressing HER2 demonstrated better MR imaging than HER2-negative tumors after intravenous administration of HER2-targeting magnetosomes, and the MR signals of the augmented contrast could be detected from 3 to 24 h. The magnetosomes did not cause any notable pathogenic effect in the animals. Therefore, we expect that noninvasive imaging of tumors using HER2-targeting magnetosomes has potential for clinical applications in the near future.

Nanoarchitectured peroxidase-mimetic nanozymes: mesoporous nanocrystalline α- or γ-iron oxide?

Next-generation nanozyme based biosensing: mesoporous nanocrystalline α- or γ-iron oxide?

Magnetoliposomes as model for signal transmission

Liposomes containing magnetic nanoparticles (magnetoliposomes) have been extensively explored for targeted drug delivery. However, the magnetic effect of nanoparticles movement is also an attractive choice for the conduction of signals in communication systems at the nanoscale level because of the simple manipulation and efficient control. Here, we propose a model for the transmission of electrical and luminous signals taking advantage of magnetophoresis. The study involved three steps. Firstly, magnetite was synthesized and incorporated into fusogenic large unilamellar vesicles (LUVs) previously associated with a fluorescent label. Secondly, the fluorescent magnetite-containing LUVs delivered their contents to the giant unilamellar vesicles (GUVs), which were corroborated by magnetophoresis and fluorescence microscopy. In the third step, magnetophoresis of magnetic vesicles was used for the conduction of the luminous signal from a capillary to an optical fibre connected to a fluorescence detector. Also, the magnetophoresis effects on subsequent transmission of the electrochemical signal were demonstrated using magnetite associated with CTAB micelles modified with ferrocene. We glimpse that these magnetic supramolecular systems can be applied in micro- and nanoscale communication systems.

The effects of intraparticle structure and interparticle interactions on the magnetic hysteresis loop of magnetic nanoparticles

Technologically relevant magnetic nanoparticles for biomedicine are rarely noninteracting single-domain nanoparticles; instead, they are often interacting, with complex physical and magnetic structures. In this paper, we present both experimental and simulated magnetic hysteresis loops of a system of magnetic nanoparticles with significant interparticle interactions and a well-defined intraparticle structure which are used for magnetic nanoparticle hyperthermia cancer treatment. Experimental measurements were made at 11 K on suspensions of magnetic nanoparticles dispersed in H₂O which have been frozen in a range of applied magnetic fields to tune the interparticle interactions. Micromagnetic simulations of hysteresis loops investigated the roles of particle orientation with respect to the field and of particle chaining in the shape of the hysteresis loops. In addition, we present an analysis of the magnetic anisotropy arising from the combination of magnetocrystalline and shape anisotropy, given the well-defined internal structure of the nanoparticles. We find that the shape of the experimental hysteresis loops can be explained by the internal magnetic structure, modified by the effects of interparticle interactions from chaining.

Tenacic Acids: A New Class of Tenacious Binders to Metal Oxide Surfaces

The backbone of 2-hydroxyisophthalic acid was identified as a potential metal oxide anchor because of the perfect alignment of all three of its donor groups for binding to inorganic surfaces. It can therefore be used in the design of organic linkers for metal oxide based hybrid materials. Optimized and scalable methods for the synthesis of 2-hydroxyisophthalic acid (1) and its 5-substituted derivatives: 5-bromo- (2), 5-sulfooxy- (3), 5-hydroxy- (4), and 5-PEG600 (5) are presented. Dynamic light scattering (DLS) demonstrated that compound 2 inhibits Fe(OH)3 precipitation when FeIII aqueous solutions are titrated with NaOH, while similar titrations in the presence of the structurally-related isophthalic and salicylic acids, both missing the third donor group, show turbidity at pHs as low as 2.3 and 3.5, respectively. The adduct synthesized from 4.5 nm γ-Fe2 O3 nanoparticles and 5 is water-, alcohol- and CH2 Cl2 -soluble, and forms stable aqueous colloids in the pH range of 4.4-8.7. Moreover, at a pH close to neutral these colloids survive at 100 °C, demonstrating the high practicality of 2-hydroxyisophthalic acid for nanoparticulate inorganic/organic hybrid material design.

Surface Design of Eu-Doped Iron Oxide Nanoparticles for Tuning the Magnetic Relaxivity

Relaxivity tuning of nanomaterials with the intrinsic T₁- T₂ dual-contrast ability has great potential for MRI applications. Until now, the relaxivity tuning of T₁ and T₂ dual-modal MRI nanoprobes has been accomplished through the dopant, size, and morphology of the nanoprobes, leaving room for bioapplications. However, a surface engineering method for the relaxivity tuning was seldom reported. Here, we report the novel relaxivity tuning method based on the surface engineering of dual-mode T₁- T₂ MRI nanoprobes (DMNPs), along with protein interaction monitoring with the DMNPs as a potential biosensor application. Core nanoparticles (NPs) of europium-doped iron oxide (EuIO) are prepared by a thermal decomposition method. As surface materials, citrate (Cit), alendronate (Ale), and poly(maleic anhydride- alt-1-octadecene)/poly(ethylene glycol) (PP) are employed for the relaxivity tuning of the NPs based on surface engineering, resulting in EuIO-Cit, EuIO-Ale, and EuIO-PP, respectively. The key achievement of the current study is that the surface materials of the DMNP have significant impacts on the r₁ and r₂ relaxivities. The correlation between the hydrophobicity of the surface material and longitudinal relaxivity ( r₁) of EuIO NPs presents an exponential decay feature. The r₁ relaxivity of EuIO-Cit is 13.2-fold higher than that of EuIO-PP. EuIO can act as T₁- T₂ dual-modal (EuIO-Cit) or T₂-dominated MRI contrast agents (EuIO-PP) depending on the surface engineering. The feasibility of using the resulting nanosystem as a sensor for environmental changes, such as albumin interaction, was also explored. The albumin interaction on the DMNP shows both T₁ and T₂ relaxation time changes as mutually confirmative information. The relaxivity tuning approach based on the surface engineering may provide an insightful strategy for bioapplications of DMNPs and give a fresh impetus for the development of novel stimuli-responsive MRI nanoplatforms with T₁ and T₂ dual-modality for various biomedical applications.

Nanoparticle binding attenuates the pathobiology of gastric cancer-associated Helicobacter pylori

Enteric bacteria may cause severe diseases, including gastric cancer-associated Helicobacter pylori. Their infection paths overlap with the oro-gastrointestinal uptake route for nanoparticles, increasingly occurring during environmental or consumer/medical exposure. By comprehensive independent analytical methods, such as live cell fluorescence, electron as well as atomic force microscopy and elemental analysis, we show that a wide array of nanoparticles (NPs) but not microparticles form complexes with H. pylori and enteric pathogens without the need for specific functionalization. The NP-assembly that occurred rapidly was not influenced by variations in physiological temperature, though affected by the NPs' physico-chemical characteristics. Improved binding was observed for small NPs with a negative surface charge, whereas binding could be reduced by surface 'stealth' modifications. Employing human gastric epithelial cells and 3D-organoid models of the stomach, we show that NP-coating did not inhibit H. pylori's cellular attachment. However, even the assembly of non-bactericidal silica NPs attenuated H. pylori infection by reducing CagA phosphorylation, cytoskeletal rearrangement, and IL-8 secretion. Here we demonstrate that NP binding to enteric bacteria may impact their pathobiology which could be further exploited to rationally modulate the (patho)biology of microbes by nanomaterials.

Multifunctional Theranostic Nanoparticles Based on Exceedingly Small Magnetic Iron Oxide Nanoparticles for T1-Weighted Magnetic Resonance Imaging and Chemotherapy

The recently emerged exceedingly small magnetic iron oxide nanoparticles (ES-MIONs) (<5 nm) are promising T₁-weighted contrast agents for magnetic resonance imaging (MRI) due to their good biocompatibility compared with Gd-chelates. However, the best particle size of ES-MIONs for T₁ imaging is still unknown because the synthesis of ES-MIONs with precise size control to clarify the relationship between the r₁ (or r₂/r₁) and the particle size remains a challenge. In this study, we synthesized ES-MIONs with seven different sizes below 5 nm and found that 3.6 nm is the best particle size for ES-MIONs to be utilized as T₁-weighted MR contrast agent. To enhance tumor targetability of theranostic nanoparticles and reduce the nonspecific uptake of nanoparticles by normal healthy cells, we constructed a drug delivery system based on the 3.6 nm ES-MIONs for T₁-weighted tumor imaging and chemotherapy. The laser scanning confocal microscopy (LSCM) and flow cytometry analysis results demonstrate that our strategy of precise targeting via exposure or hiding of the targeting ligand RGD₂ on demand is feasible. The MR imaging and chemotherapy results on the cancer cells and tumor-bearing mice reinforce that our DOX@ES-MION3@RGD₂@mPEG3 nanoparticles are promising for high-resolution T₁-weighted MR imaging and precise chemotherapy of tumors.

Hydroxyapatite as a Vehicle for the Selective Effect of Superparamagnetic Iron Oxide Nanoparticles against Human Glioblastoma Cells

Despite the early promises of magnetic hyperthermia (MH) as a method for treating cancer, it has been stagnating in the past decade. Some of the reasons for the low effectiveness of superparamagnetic nanoparticles (SPIONs) in MH treatments include (a) low uptake in cancer cells; (b) generation of reactive oxygen species that cause harm to the healthy cells; (c) undeveloped targeting potential; and (d) lack of temperature sensitivity between cancer cells and healthy cells. Here we show that healthy cells, including human mesenchymal stem cells (MSCs) and primary mouse kidney and lung fibroblasts, display an unfavorably increased uptake of SPIONs compared to human brain cancer cells (E297 and U87) and mouse osteosarcomas cells (K7M2). Hydroxyapatite (HAP), the mineral component of our bones, may offer a solution to this unfavorably selective SPION delivery. HAP nanoparticles are commended not only for their exceptional biocompatibility but also for the convenience of their use as an intracellular delivery agent. Here we demonstrate that dispersing SPIONs in HAP using a wet synthesis method could increase the uptake in cancer cells and minimize the risk to healthy cells. Specifically, HAP/SPION nanocomposites retain the superparamagnetic nature of SPIONs, increase the uptake ratio between U87 human brain cancer cells and human MSCs versus their SPION counterparts, reduce migration in a primary brain cancer spheroid model compared to the control, reduce brain cancer cell viability compared to the treatment with SPIONs alone, and retain the viability of healthy human MSCs. A functional synergy between the two components of the nanocomposites was established; as a result, the cancer versus healthy cell (U87/MSC) selectivity in terms of both the uptake and the toxicity was higher for the composite than for SPIONs or HAP alone, allowing it to be damaging to cancer cells and harmless to the healthy ones. The analysis of actin cytoskeleton order at the microscale revealed that healthy MSCs and primary cancer cells after the uptake of SPIONs display reduced and increased anisotropy in their cytoskeletal arrangement, respectively. In contrast, the uptake of SPION/HAP nanocomposites increased the cytoskeletal anisotropy of both the healthy MSCs and the primary cancer cells. In spite of the moderate specific magnetization of HAP/SPION nanohybrids, reaching 15 emu/g for the 28.6 wt % SPION-containing composite, the cancer cell treatment in an alternating magnetic field resulted in an intense hyperthermia effect that increased the temperature by ca. 1 °C per minute of exposure and reduced the cell population treated for 30 min by more than 50%, while leaving the control populations unharmed. These findings on nanocomposites of HAP and SPIONs may open a new avenue for cancer therapies that utilize MH.

Use of Nanoparticles for Enhancing the Interlaminar Properties of Fiber-Reinforced Composites and Adhesively Bonded Joints-A Review

This review paper aims at reporting some of the notable works carried out concerning the use of nanoparticles (NPs) as a means of improving the resistance of fiber-reinforced polymer composite materials (FRPs) and adhesively bonded joints (ABJs) to delamination initiation and propagation. Applications of various nanoparticles, such as carbon-based, ceramic-based and mineral-based are discussed. The main properties that have been considered for improving the delamination and fatigue resistance of FRPs are the interlaminar shear strength, fracture toughness, and fracture energy. On the other hand, cohesive and interfacial strengths have been the focused parameters in the works that considered enhancement of ABJs. The reported results indicate that inclusion of NPs in polymeric matrices leads to improvement of various material properties, even though some discrepancies in the results have been noted. Notwithstanding, additional research is required to address some of the issues that have not yet been tackled, some of which will be identified throughout this review article.