Probing Hydrogen Bonding in Cocrystals and Amorphous Dispersions Using 14N–1H HMQC Solid-State NMR

Probing the Molecular and Macroscopic Structure of Solid Solutions by Dynamic Nuclear Polarization (DNP) Enhanced 13C and 15N Solid-State NMR Spectroscopy

Crystallization is a widely used purification technique in the manufacture of active pharmaceutical ingredients (APIs) and precursor molecules. However, when impurities and desired compounds have similar molecular structures, separation by crystallization may become challenging. In such cases, some impurities may form crystalline solid solutions with the desired product during recrystallization. Understanding the molecular structure of these recrystallized solid solutions is crucial to devise methods for effective purification. Unfortunately, there are limited analytical techniques that provide insights into the molecular structure or spatial distribution of impurities that are incorporated within recrystallized products. In this study, we investigated model solid solutions formed by recrystallizing salicylic acid (SA) in the presence of anthranilic acid (AA). These two molecules are known to form crystalline solid solutions due to their similar molecular structures. To overcome challenges associated with the long 1H longitudinal relaxation times (T1(1H)) of SA and AA, we employed dynamic nuclear polarization (DNP) and 15N isotope enrichment to enable solid-state NMR experiments. Results of solid-state NMR experiments and DFT calculations revealed that SA and AA are homogeneously alloyed as a solid solution. Heteronuclear correlation (HETCOR) experiments and plane-wave DFT structural models provide further evidence of the molecular-level interactions between SA and AA. This research provides valuable insights into the molecular structure of recrystallized solid solutions, contributing to the development of effective purification strategies and an understanding of the physicochemical properties of solid solutions.

Distinguishing between COOH, COO- , and hydrogen disordered COOH sites in solids with 13 C chemical shift anisotropy and T1 measurements

Since 1993, it has been known that 13 C chemical shift tensor (i.e., δ11 , δ22 , and δ33 ) provides information sufficient to distinguish between COOH and COO- sites. Herein, four previously unreported metrics are proposed for differentiating COOH/COO- moieties. A new relationship is also introduced that correlates the asymmetry (i.e., δ11 -δ22 ) of COOH sites to the proximity of hydrogen bond donating partners within 2.6 Å with high accuracy (±0.05 Å). Conversely, a limitation to all proposed metrics is that they fail to distinguish between COO- and hydrogen disordered COOH sites. To reconcile this omission, a new approach is proposed based on T1 measurements of both 1 H and 13 C. The 13 C T1 values are particularly sensitive with the T1 for hydrogen disordered COOH moieties found to be nearly six times smaller than T1 's from COO- sites.

Use of Time-Domain NMR for 1H T1 Relaxation Measurement and Fitting Analysis in Homogeneity Evaluation of Amorphous Solid Dispersion

This study examined the usefulness of 1H T1 relaxation measurements for evaluating the homogeneity of amorphous solid dispersion (ASD). Indomethacin and polyvinylpyrrolidone were used to prepare two kinds of ASDs. One was inhomogeneous ASD (ASDmelt) prepared by a melt-quenching method, and the other was homogeneous ASD (ASDsolvent) prepared by a solvent evaporation method. The T1 relaxation was measured by the time-domain NMR (TD-NMR) technique using a low-field NMR system. Curve-fitting analysis of T1 relaxation plots was conducted using the Akaike information criterion. This fitting analysis revealed that the T1 relaxation of ASDmelt and ASDsolvent was biphasic and monophasic, respectively. ASDmelt and ASDsolvent were inhomogeneous and homogeneous on a nanometer scale, respectively, considering the spin diffusion of 1H nuclei. These T1 results were consistent with the Raman mapping of ASDs. From the fitting analysis of 1H T1 relaxation, we conclude that TD-NMR is a promising technique for evaluating ASD homogeneity.

Accelerated acquisition of wideline solid-state NMR spectra of spin 3/2 nuclei by frequency-stepped indirect detection experiments

73% of all NMR-active nuclei are quadrupolar nuclei with a nuclear spin I > 1/2. The broadening of the solid-state NMR signals by the quadrupolar interaction often leads to poor sensitivity and low resolution. In this work we present experimental and theoretical investigations of magic angle spinning (MAS) 1H{X} double-echo resonance-echo saturation-pulse double-resonance (DE-RESPDOR) and Y{X} J-resolved solid-state NMR experiments for the indirect detection of spin 3/2 quadrupolar nuclei (X = spin 3/2 nuclei, Y = spin 1/2 nuclei). In these experiments, the spectrum of the quadrupolar nucleus is reconstructed by plotting the observed dephasing of the detected spin as a function of the transmitter offset of the indirectly detected spin. Numerical simulations were used to investigate the achievable levels of dephasing and to predict the lineshapes of indirectly detected NMR spectra of the quadrupolar nucleus. We demonstrate 1H, 31P and 207Pb detection of 35Cl, 81Br, and 63Cu (I = 3/2) nuclei in trans-Cl2Pt(NH3)2 (transplatin), (CH3NH3)PbCl3 (methylammonium lead chloride, MAPbCl3), (CH3NH3)PbBr3 (methylammonium lead bromide, MAPbBr3) and CH3C(CH2PPh2)3CuI (1,1,1-tris(diphenylphosphinomethyl)ethane copper(I) iodide, triphosCuI), respectively. In all of these experiments, we were able to detect megahertz wide central transition or satellite transition powder patterns. Significant time savings and gains in sensitivity were attained in several test cases. Additionally, the indirect detection experiments provide valuable structural information because they confirm the presence of dipolar or scalar couplings between the detected nucleus and the quadrupolar nucleus of interest. Finally, numerical simulations suggest these methods are also potentially applicable to abundant spin 5/2 and spin 7/2 quadrupolar nuclei.

Opportunities and Challenges in Applying Solid-State NMR Spectroscopy in Organic Mechanochemistry

In recent years it is shown that mechanochemical strategies can be beneficial in directed conversions of organic compounds. Finding new reactions proved difficult, and due to the lack of mechanistic understanding of mechanochemical reaction events, respective efforts have mostly remained empirical. Spectroscopic techniques are crucial in shedding light on these questions. In this overview, the opportunities and challenges of solid-state nuclear magnetic resonance (NMR) spectroscopy in the field of organic mechanochemistry are discussed. After a brief discussion of the basics of high-resolution solid-state NMR under magic-angle spinning (MAS) conditions, seven opportunities for solid-state NMR in the field of organic mechanochemistry are presented, ranging from ex situ approaches to structurally elucidated reaction products obtained by milling to the potential and limitations of in situ solid-state NMR approaches. Particular strengths of solid-state NMR, for instance in differentiating polymorphs, in NMR-crystallographic structure-determination protocols, or in detecting weak noncovalent interactions in molecular-recognition events employing proton-detected solid-state NMR experiments at fast MAS frequencies, are discussed.

Polymer-inducing chemical degradation of amorphous solid dispersions driven by drug-polymer interactions for physical stabilization

Intermolecular interactions between active pharmaceutical ingredients (APIs) and carrier polymers are important for the long-term physical stability of amorphous solid dispersions (ASDs). However, the negative impact of intermolecular interactions on chemical stability has rarely been reported. In this study, the relationship between intermolecular interactions and physical and chemical stability was investigated using two ASDs composed of API and hydroxypropyl methylcellulose acetate succinate (HPMCAS) with different stabilities: ASD1 was physically stable but chemically unstable, whereas ASD2 was physically unstable but chemically stable. Ionic-bonding between the pyridine nitrogen in the API and succinyl group in HPMCAS was found in both ASDs. The additional interaction between the succinyl group in HPMCAS and the hydroxyl group in the API was suggested only in ASD1. It was concluded that the additional interaction contributed to the physical stability of ASD1; however, it accelerated the chemical reaction between the succinyl and hydroxyl groups to generate succinyl ester owing to its close proximity. This study shows that the intermolecular interaction between the API and carrier polymer is not always beneficial for chemical stability. Understanding the molecular states of APIs and polymers in ASDs is important for their successful development.

Discovering the Solid-State Secrets of Lorlatinib by NMR Crystallography: To Hydrogen Bond or not to Hydrogen Bond

Lorlatinib is an active pharmaceutical ingredient (API) used in the treatment of lung cancer. Here, an NMR crystallography analysis is presented whereby the single-crystal X-ray diffraction structure (CSD: 2205098) determination is complemented by multinuclear (1H, 13C, 14/15N, 19F) magic-angle spinning (MAS) solid-state NMR and gauge-including projector augmented wave (GIPAW) calculation of NMR chemical shifts. Lorlatinib crystallises in the P21 space group, with two distinct molecules in the asymmetric unit cell, Z' = 2. Three of the four NH2 hydrogen atoms form intermolecular hydrogen bonds, N30-H…N15 between the two distinct molecules and N30-H…O2 between two equivalent molecules. This is reflected in one of the NH21H chemical shifts being significantly lower, 4.0 ppm compared to 7.0 ppm. Two-dimensional 1H-13C, 14N-1H and 1H (double-quantum, DQ)-1H (single-quantum, SQ) MAS NMR spectra are presented. The 1H resonances are assigned and specific HH proximities corresponding to the observed DQ peaks are identified. The resolution enhancement at a 1H Larmor frequency of 1 GHz as compared to 500 or 600 MHz is demonstrated.

Comparison of methods for 14N-1H recoupling in 14N-1H HMQC MAS NMR

¹H-detected ¹⁴N heteronuclear multiple-quantum coherence (HMQC) magic-angle-spinning (MAS) NMR experiments performed at fast magic-angle spinning (≥50 kHz) are finding increasing application, e.g., to pharmaceuticals. Of importance to the efficacy of these techniques is the recoupling technique applied to reintroduce the ¹H-¹⁴N dipolar coupling. In this paper, we compare, by experiment and 2-spin density matrix simulations, two classes of recoupling scheme: first, those based on n = 2 rotary resonance, namely R³ and spin-polarisation inversion SPI-R³, and the symmetry based SR4₁² method and, second, the TRAPDOR method. Both classes require optimisation depending on the magnitude of the quadrupolar interaction, and thus there is a compromise choice for samples with more than one nitrogen site, as is the case for the studied dipeptide β-AspAla that contains two nitrogen sites with a small and large quadrupolar coupling constant. Considering this, we observe better sensitivity for the TRAPDOR method, though noting the marked sensitivity of TRAPDOR to the ¹⁴N transmitter offset, with both SPI-R³ and SR4₁² giving similar recoupling performance.

Benchmark accuracy of predicted NMR observables for quadrupolar 14 N and 17 O nuclei in molecular crystals

Nuclear quadrupole resonances for 14 N and ¹⁷ O nuclei are exquisitely sensitive to interactions with surrounding atoms. As a result, nitrogen and oxygen solid-state nuclear magnetic resonance (ssNMR) provides a powerful tool for investigating structure and dynamics in complex systems. First-principles calculations are increasingly used to facilitate spectral assignment and to evaluate and adjust crystal structures. Recent work combining the strengths of planewave density functional theory (DFT) calculations with a single molecule correction obtained using a higher level of theory has proven successful in improving the accuracy of predicted chemical shielding (CS) tensors and ¹⁷ O quadrupolar coupling constants ( C q ). Here we extend this work by examining the accuracy of predicted ¹⁴ N and ¹⁷ O electric field gradient (EFG) tensor components obtained using alternative planewave-corrections involving cluster and two-body fragment-based calculations. We benchmark the accuracy of CS and EFG tensor predictions for both nitrogen and oxygen using planewave, two-body fragment, and enhanced planewave-corrected techniques. Combining planewave and two-body fragment calculations reduces the error in predicted ¹⁷ O C q values by 35% relative to traditional planewave calculations. These enhanced planewave-correction methods improve the accuracy of ¹⁷ O and ¹⁴ N EFG tensor components by 15% relative to planewave DFT but yield minimal improvement relative to a simple molecular correction. However, in structural environments involving either high symmetry or strong intermolecular interactions, enhanced planewave-corrected methods provide a distinct advantage.

Efficient analysis of pharmaceutical drug substances and products using a solid-state NMR CryoProbe

Solid-state nuclear magnetic resonance (ssNMR) is a high-resolution and versatile spectroscopic tool for characterizing pharmaceutical solids. However, the inherent low sensitivity of NMR remains a significant challenge in the analysis of natural abundance drug substances and products. Here, we report, for the first time, the application of a CPMAS CryoProbe™ to improve the sensitivity of ¹³C and ¹⁵N detection by approximately 5 to 6 times for solid-state analysis of a commercial pharmaceutical drug posaconazole (POSA). The sensitivity enhancement enables two-dimensional (2D) ¹³C-¹³C and ¹H-¹⁵N correlation experiments, which are otherwise time-prohibitive using regular MAS probes, for resonance assignment and structural elucidation. These polarization transfer and correlation experiments reveal drug-drug and drug-polymer interactions in amorphous POSA and its amorphous solid dispersion formulation. Our results demonstrated that the CPMAS CryoProbe™ can be widely applied for routine pharmaceutical analysis and advanced structural investigations with significantly enhanced efficiency and throughput.

Ultrafast Magic Angle Spinning Solid-State NMR Spectroscopy: Advances in Methodology and Applications

Solid-state NMR spectroscopy is one of the most commonly used techniques to study the atomic-resolution structure and dynamics of various chemical, biological, material, and pharmaceutical systems spanning multiple forms, including crystalline, liquid crystalline, fibrous, and amorphous states. Despite the unique advantages of solid-state NMR spectroscopy, its poor spectral resolution and sensitivity have severely limited the scope of this technique. Fortunately, the recent developments in probe technology that mechanically rotate the sample fast (100 kHz and above) to obtain "solution-like" NMR spectra of solids with higher resolution and sensitivity have opened numerous avenues for the development of novel NMR techniques and their applications to study a plethora of solids including globular and membrane-associated proteins, self-assembled protein aggregates such as amyloid fibers, RNA, viral assemblies, polymorphic pharmaceuticals, metal-organic framework, bone materials, and inorganic materials. While the ultrafast-MAS continues to be developed, the minute sample quantity and radio frequency requirements, shorter recycle delays enabling fast data acquisition, the feasibility of employing proton detection, enhancement in proton spectral resolution and polarization transfer efficiency, and high sensitivity per unit sample are some of the remarkable benefits of the ultrafast-MAS technology as demonstrated by the reported studies in the literature. Although the very low sample volume and very high RF power could be limitations for some of the systems, the advantages have spurred solid-state NMR investigation into increasingly complex biological and material systems. As ultrafast-MAS NMR techniques are increasingly used in multidisciplinary research areas, further development of instrumentation, probes, and advanced methods are pursued in parallel to overcome the limitations and challenges for widespread applications. This review article is focused on providing timely comprehensive coverage of the major developments on instrumentation, theory, techniques, applications, limitations, and future scope of ultrafast-MAS technology.

The hydrogen bond continuum in solid isonicotinic acid

The understanding and correct description of intermolecular hydrogen bonds are crucial in the field of multicomponent pharmaceutical solids, such as salts and cocrystals. Solid isonicotinic acid can serve as a suitable model for the development of methods that can accurately characterize these hydrogen bonds. Experimental solid-state NMR has revealed a remarkable temperature dependence and deuterium-isotope-induced changes of the chemical shifts of the atoms involved in the intermolecular hydrogen bond; these NMR data are related to changes of the average position of the hydrogen atom. These changes of NMR parameters were interpreted using periodic DFT path-integral molecular dynamics (PIMD) simulations. The small size of the unit cell of isonicotinic acid allowed for PIMD simulations with the computationally demanding hybrid DFT functional. Calculations of NMR parameters based on the hybrid-functional PIMD simulations are in excellent agreement with experiment. It is thus demonstrated that an accurate characterization of intermolecular hydrogen bonds can be achieved by a combination of NMR experiments and advanced computations.

New Development in Understanding Drug-Polymer Interactions in Pharmaceutical Amorphous Solid Dispersions from Solid-State Nuclear Magnetic Resonance

Pharmaceutical amorphous solid dispersions (ASDs) represent a widely used technology to increase the bioavailability of active pharmaceutical ingredients (APIs). ASDs are based on an amorphous API dispersed in a polymer, and their stability is driven by the presence of strong intermolecular interactions between these two species (e.g., hydrogen bond, electrostatic interactions, etc.). The understanding of these interactions at the atomic level is therefore crucial, and solid-state nuclear magnetic resonance (NMR) has demonstrated itself as a very powerful technique for probing API-polymer interactions. Other reviews have also reported exciting approaches to study the structures and dynamic properties of ASDs and largely focused on the study of API-polymer miscibility and on the identification of API-polymer interactions. Considering the increased use of NMR in the field, the aim of this Review is to specifically highlight recent experimental strategies used to identify API-polymer interactions and report promising recent examples using one-dimensional (1D) and two-dimensional (2D) experiments by exploiting the following emerging approaches of very-high magnetic field and ultrafast magic angle spinning (MAS). A range of different ASDs spanning APIs and polymers with varied structural motifs is targeted to illustrate new ways to understand the mechanism of stability of ASDs to enable the design of new dispersions.

Chemical exchange of labile protons by deuterium enables selective detection of pharmaceuticals in solid formulations

Chemically assisted swapping of labile protons by deuterons is presented for amino acids, polysaccharides, pharmaceutical compounds, and their solid formulations. Solid-state packing interactions in these compounds are elucidated by ¹H-²H isotope correlation NMR spectroscopy (iCOSY). A minuscule concentration of dopamine, 5 wt% or ∼100 μg, in a solid formulation can be detected by ²H NMR at 28.2 T (¹H, 1200 MHz) in under a minute.

t1-noise elimination by continuous chemical shift anisotropy refocusing

Due to their high gyromagnetic ratio, there is considerable interest in measuring distances and correlations involving protons, but such measurements are compounded by the simultaneous recoupling of chemical shift anisotropy (CSA). This secondary recoupling adds additional modulations to the signal intensities that ultimately lead to t₁-noise and signal decay. Recently, Venkatesh et al. demonstrated that the addition of CSA refocusing periods during ¹H-X dipolar recoupling led to sequences with far higher stability and performance. Herein, we describe a related effort and develop a symmetry-based recoupling sequence that continually refocuses the ¹H CSA. This sequence shows superior performance to the regular and t₁-noise eliminated D-HMQC sequences in the case of spin-1/2 nuclei and comparable performance to the later for half-integer quadrupoles.

Detection of remote proton-nitrogen correlations by 1H-detected 14N overtone solid-state NMR at fast MAS

Detecting proton and nitrogen correlations in solid-state nuclear magnetic resonance (NMR) is important for the structural determination of biological and chemical systems. Recent advances in proton detection-based approaches under fast magic-angle spinning have facilitated the detection of ¹H-¹⁴N correlations by solid-state NMR. However, observing remote ¹H-¹⁴N correlations by these approaches is still a challenge, especially for ¹⁴N sites having large quadrupolar couplings. To address this issue, we introduce the ¹H-¹⁴N overtone continuous wave rotational-echo saturation-pulse double-resonance (¹H-¹⁴N OT CW-RESPDOR) sequence. Unlike regular 2D correlation experiments where the indirect dimension is recorded in the time domain, the ¹H-¹⁴N OT CW-RESPDOR experiment is directly observed in the frequency domain. A set of ¹H-¹⁴N OT CW-RESPDOR filtered ¹H spectra is recorded at varying ¹⁴N OT frequencies. Thanks to the selective nature of the ¹⁴N OT pulse, the filtered ¹H spectra appear only if the ¹⁴N OT frequency hits the positions of the ¹⁴N OT central band or one of the spinning sidebands. This set of filtered ¹H spectra represents a 2D ¹H-¹⁴N OT correlation map. We have also investigated the optimizable parameters for CW-RESPDOR and figured out that these parameters are not strictly needed for our working magnetic field of 14.1 T. Hence, the experiment is easy to set up and requires almost no optimization. We have demonstrated the experimental feasibility of ¹H-¹⁴N OT CW-RESPDOR on monoclinic L-histidine and L-alanyl L-alanine. The remote ¹H-¹⁴N correlations have been efficiently detected, no matter how large the ¹⁴N quadrupolar interaction is, and agree with the crystal structures. In addition, based on the remote ¹H-¹⁴N correlations from the non-protonated ¹⁴N site of L-histidine, we can unambiguously distinguish the orthorhombic and monoclinic forms.

Importance of Nuclear Quantum Effects for Molecular Cocrystals with Short Hydrogen Bonds

Many efforts have been recently devoted to the design and investigation of multicomponent pharmaceutical solids, such as salts and cocrystals. The experimental distinction between these solid forms is often challenging. Here, we show that the transformation of a salt into a cocrystal with a short hydrogen bond does not occur as a sharp phase transition but rather a smooth shift of the positional probability of the hydrogen atoms. A combination of solid-state NMR spectroscopy, X-ray diffraction, and diffuse reflectance measurements with density functional theory calculations that include nuclear quantum effects (NQEs) provides evidence of temperature-induced hydrogen atom shift in cocrystals with short hydrogen bonds. We demonstrate that for the predictions of the salt/cocrystal solid forms with short H-bonds, the computations have to include NQEs (particularly hydrogen nuclei delocalization) and temperature effects.

Solid-State NMR-Driven Crystal Structure Prediction of Molecular Crystals: The Case of Mebendazole

Among all possible NMR crystallography approaches for crystal-structure determination, crystal structure prediction - NMR crystallography (CSP-NMRX) has recently turned out to be a powerful method. In the latter, the original procedure exploited solid-state NMR (SSNMR) information during the final steps of the prediction. In particular, it used the comparison of computed and experimental chemical shifts for the selection of the correct crystal packing. Still, the prediction procedure, generally carried out with DFT methods, may require important computational resources and be quite time-consuming, especially if there are no available constraints to use at the initial stage. Herein, the successful application of this combined prediction method, which exploits NMR information also in the input step to reduce the search space of the predictive algorithm, is presented. Herein, this method was applied on mebendazole, which is characterized by desmotropism. The use of SSNMR data as constraints for the selection of the right tautomer and the determination of the number of independent molecules in the unit cell led to a considerably faster process, reducing the number of calculations to be performed. In this way, the crystal packing was successfully predicted for the three known phases of mebendazole. To evaluate the quality of the predicted structures, these were compared to the experimental ones. The crystal structure of phase B of mebendazole, in particular, was determined de novo by powder diffraction and is presented for the first time in this paper.

A toolbox for improving the workflow of NMR crystallography

NMR crystallography is a powerful tool with applications in structural characterization and crystal structure verification, to name two. However, applying this tool presents several challenges, especially for industrial users, in terms of consistency, workflow, time consumption, and the requirement for a high level of understanding of experimental solid-state NMR and GIPAW-DFT calculations. Here, we have developed a series of fully parameterized scripts for use in Materials Studio and TopSpin, based on the .magres file format, with a focus on organic molecules (e.g. pharmaceuticals), improving efficiency, robustness, and workflow. We separate these tools into three major categories: performing the DFT calculations, extracting & visualizing the results, and crystallographic modelling. These scripts will rapidly submit fully parameterized CASTEP jobs, extract data from the calculations, assist in visualizing the results, and expedite the process of structural modelling. Accompanied with these tools is a description on their functionality, documentation on how to get started and use the scripts, and links to video tutorials for guiding new users. Through the use of these tools, we hope to facilitate NMR crystallography and to harmonize the process across users.

Nutraceuticals in Bulk and Dosage Forms: Analysis by 35Cl and 14N Solid-State NMR and DFT Calculations

This study uses ³⁵Cl and ¹⁴N solid-state NMR (SSNMR) spectroscopy and dispersion-corrected plane-wave density functional theory (DFT) calculations for the structural characterization of chloride salts of nutraceuticals in their bulk and dosage forms. For eight nutraceuticals, we measure the ³⁵Cl EFG tensor parameters of the chloride ions and use plane-wave DFT calculations to elucidate relationships between NMR parameters and molecular-level structure, which provide rapid NMR crystallographic assessments of structural features. We employ both ³⁵Cl direct excitation and ¹H→³⁵Cl cross-polarization methods to characterize a dosage form containing α-d-glucosamine HCl, observe possible impurity and/or adulterant phases, and quantify the weight percent of the active ingredient. To complement this, we also investigate ¹⁴N SSNMR spectroscopy and DFT calculations to characterize nitrogen atoms in the nutraceuticals. This includes a discussion of targeted acquisition experimental protocols (i.e., acquiring a select region of the overall pattern that features key discontinuities) that allow ultrawideline spectra to be acquired rapidly, even for unreceptive samples (i.e., those with long values of T₁(¹⁴N), short values of T₂^eff(¹⁴N), or very broad patterns). It is hoped that these experimental and computational protocols will be useful for the characterization of various solid forms of nutraceuticals (i.e., salts, polymorphs, hydrates, solvates, cocrystals, amorphous solid dispersions, etc.), help detect impurity and counterfeit solid phases in dosage forms, and serve as a foundation for future NMR crystallographic studies of nutraceutical solid forms, including studies using ab initio crystal structure prediction algorithms.

Variable-Temperature NMR Analysis of the Thermodynamics of Polymer Partitioning between Aqueous and Drug-Rich Phases and Its Significance for Amorphous Formulations

We previously reported that the polymers used in amorphous solid dispersion (ASD) formulations, such as polyvinylpyrrolidone (PVP), polyvinylpyrrolidone/vinyl acetate (PVP-VA), and hypromellose (HPMC), distribute into the drug-rich phase of ibuprofen (IBP) formed by liquid-liquid phase separation, resulting in a reduction in the maximum drug supersaturation in the aqueous phase. Herein, the mechanism underlying the partitioning of the polymer into the drug-rich phase was investigated from a thermodynamic perspective. The dissolved IBP concentration in the aqueous phase and the amount of polymer distributed into the IBP-rich phase were quantitatively analyzed in IBP-supersaturated solutions containing different polymers using variable-temperature solution-state nuclear magnetic resonance (NMR) spectroscopy. The polymer weight ratio in the IBP-rich phase increased at higher temperatures, leading to a more notable reduction of IBP amorphous solubility. Among the polymers, the amorphous solubility reduction was the greatest for the PVP-VA solution at lower temperatures, while HPMC reduced the amorphous solubility to the greatest extent at higher temperatures. The change in the order of polymer impact on the amorphous solubility resulted from the differences in the temperature dependency of polymer partitioning. The van't Hoff plot of the polymer partition coefficient revealed that both enthalpy and entropy changes for polymer transfer into the IBP-rich phase from the aqueous phase (ΔH_{aqueous→IBP-rich} and ΔS_{aqueous→IBP-rich}) gave positive values for most of the measured temperature range, indicating that polymer partitioning into the IBP-rich phase was an endothermic but entropically favorable process. The polymer transfer into the IBP-rich phase was more endothermic for HPMC than for PVP and PVP-VA. The solid-state NMR analysis of the IBP/polymer ASD implied that the newly formed IBP/polymer interactions in the IBP-rich phase upon polymer incorporation were weaker for HPMC, providing a rationale for the larger positive transfer enthalpy for HPMC. The change in Gibbs free energy for polymer transfer (ΔG_{aqueous→IBP-rich}) showed negative values across the experimental temperature range, decreasing with an increase in temperature, indicating that the distribution of the polymer into the IBP-rich phase is favored at higher temperatures. Moreover, ΔG_{aqueous→IBP-rich} for HPMC showed the greatest decrease with the temperature, likely reflecting the temperature-induced dehydration of HPMC in the aqueous phase. This study contributes fundamental insights into the phenomenon of polymer partitioning into drug-rich phases, furthering the understanding of achievable supersaturation levels and ultimately providing information on polymer selection for ASD formulations.

Drug-Polymer Interactions in Acetaminophen/Hydroxypropylmethylcellulose Acetyl Succinate Amorphous Solid Dispersions Revealed by Multidimensional Multinuclear Solid-State NMR Spectroscopy

The bioavailability of insoluble crystalline active pharmaceutical ingredients (APIs) can be enhanced by formulation as amorphous solid dispersions (ASDs). One of the key factors of ASD stabilization is the formation of drug-polymer interactions at the molecular level. Here, we used a range of multidimensional and multinuclear nuclear magnetic resonance (NMR) experiments to identify these interactions in amorphous acetaminophen (paracetamol)/hydroxypropylmethylcellulose acetyl succinate (HPMC-AS) ASDs at various drug loadings. At low drug loading (<20 wt %), we showed that 1H-13C through-space heteronuclear correlation experiments identify proximity between aromatic protons in acetaminophen with cellulose backbone protons in HPMC-AS. We also show that 14N-1H heteronuclear multiple quantum coherence (HMQC) experiments are a powerful approach in probing spatial interactions in amorphous materials and establish the presence of hydrogen bonds (H-bond) between the amide nitrogen of acetaminophen with the cellulose ring methyl protons in these ASDs. In contrast, at higher drug loading (40 wt %), no acetaminophen/HPMC-AS spatial proximity was identified and domains of recrystallization of amorphous acetaminophen into its crystalline form I, the most thermodynamically stable polymorph, and form II are identified. These results provide atomic scale understanding of the interactions in the acetaminophen/HPMC-AS ASD occurring via H-bond interactions.

35 Cl-1 H Heteronuclear correlation magic-angle spinning nuclear magnetic resonance experiments for probing pharmaceutical salts

Heteronuclear multiple-quantum coherence (HMQC) pulse sequences for establishing heteronuclear correlation in solid-state nuclear magnetic resonance (NMR) between ³⁵ Cl and ¹ H nuclei in chloride salts under fast (60 kHz) magic-angle spinning (MAS) and at high magnetic field (a ¹ H Larmor frequency of 850 MHz) are investigated. Specifically, recoupling of the ³⁵ Cl-¹ H dipolar interaction using rotary resonance recoupling with phase inversion every rotor period or the symmetry-based SR4² ₁ pulse sequences are compared. In our implementation of the population transfer (PT) dipolar (D) HMQC experiment, the satellite transitions of the ³⁵ Cl nuclei are saturated with an off-resonance WURST sweep, at a low nutation frequency, over the second spinning sideband, whereby the WURST pulse must be of the same duration as the recoupling time. Numerical simulations of the ³⁵ Cl-¹ H MAS D-HMQC experiment performed separately for each crystallite orientation in a powder provide insight into the orientation dependence of changes in the second-order quadrupolar-broadened ³⁵ Cl MAS NMR lineshape under the application of dipolar recoupling. Two-dimensional ³⁵ Cl-¹ H PT-D-HMQC MAS NMR spectra are presented for the amino acids glycine·HCl and l-tyrosine·HCl and the pharmaceuticals cimetidine·HCl, amitriptyline·HCl and lidocaine·HCl·H₂ O. Experimentally observed ³⁵ Cl lineshapes are compared with those simulated for ³⁵ Cl chemical shift and quadrupolar parameters as calculated using the gauge-including projector-augmented wave (GIPAW) method: the calculated quadrupolar product (P_Q ) values exceed those measured experimentally by a factor of between 1.3 and 1.9.

An industrial perspective on co-crystals: Screening, identification and development of the less utilised solid form in drug discovery and development

Active pharmaceutical ingredients are commonly marketed as a solid form due to ease of transport, storage and administration. In the design of a drug formulation, the selection of the solid form is incredibly important and is traditionally based on what polymorphs, hydrates or salts are available for that compound. Co-crystals, another potential solid form available, are currently not as readily considered as a viable solid form for the development process. Even though co-crystals are gaining an ever-increasing level of interest within the pharmaceutical community, their acceptance and application is still not as standard as other solid forms such as the ubiquitous pharmaceutical salt and stabilised amorphous formulations. Presented in this chapter is information that would allow for a co-crystal screen to be planned and conducted as well as scaled up using solution and mechanochemistry based methods commonly employed in both the literature and industry. Also presented are methods for identifying the formation of a co-crystal using a variety of analytical techniques as well as the importance of confirming the formation of co-crystals from a legal perspective and demonstrating the legal precedent by looking at co-crystalline products already on the market. The benefits of co-crystals have been well established, and presented in this chapter are a selection of examples which best exemplify their potential. The goal of this chapter is to increase the understanding of co-crystals and how they may be successfully exploited in early stage development.

Accurate location of hydrogen atoms in hydrogen bonds of tizoxanide from the combination of experimental and theoretical models

To obtain detailed information about the position of hydrogen atoms in hydrogen bonds, HBs, of crystalline organic molecular compounds is not an easy task. In this work we propose a combination of ssNMR experimental data with theoretical procedures to get such information. Furthermore, the combination of experimental and theoretical models provides us with well-defined grounds to analyse the strength of π-stacking interactions between layers of hydrogen bonded molecules. Two different theoretical models were considered, both approaches being quite different. The first one is a solid-state model, so that the periodicity of a crystalline system underlies calculations of the electronic energy, the electronic density and NMR parameters. The other one is a molecular model in which molecules are taken as isolated monomers, dimers and tetramers. These two models were applied to the tizoxanide, TIZ, molecular crystal though it can widely be applied to any other molecular crystal. By the application of the quantum molecular model it was possible to learn about the way the intermolecular HBs affect the position of hydrogen atoms that belong to HBs in TIZ. This molecule has two intermolecular HBs that stabilize the structure of a basic dimer, but it also has an intramolecular HB in each monomer whose position should be optimized together with the other ones. We found that by doing this it is possible to obtain reliable results of calculations of NMR spectroscopic parameters. Working with the solid-state model we found that any local variation of the TIZ crystalline structure is correlated with the variation of the values of the NMR parameters of each nucleus. The excellent agreement between experimental and calculated chemical shifts leads to the conclusion that the N10-H10 bond distance should be (1.00 ± 0.02) Å.

Solid state nuclear magnetic resonance studies of hydroxypropylmethylcellulose acetyl succinate polymer, a useful carrier in pharmaceutical solid dispersions

Hydroxypropylmethylcellulose (HPMC) acetyl succinate (HPMC-AS) is a key polymer used for the enablement of amorphous solid dispersions (ASDs) in oral solid dosage forms. Choice of the appropriate grade within the material is often made empirically by the manufacturer of small-scale formulations, followed by extensive real time stability. A key factor in understanding and predicting the performance of an ASD is related to the presence of hydrogen (or other) bonds between the polymer and active pharmaceutical ingredient (API), which will increase stability over the parameters captured by miscibility and predicted by the Gordon-Taylor equation. Solid state nuclear magnetic resonance (NMR) is particularly well equipped to probe spatial proximities, for example, between polymer and API; however, in the case of HPMC-AS, these interactions have been sometimes difficult to identity as the carbon-13 NMR spectra assignment is yet to be firmly established. Using feedstock, selectively substituted HPMC polymers, and NMR editing experiments, we propose here a comprehensive understanding of the chemical structure of HPMC-AS and a definitive spectral assignment of the ¹³ C NMR spectra of this polymer. The NMR data also capture the molar ratios of the acetate and succinate moieties present in HPMC-AS of various grades without the need for post treatment required by chromatography methods commonly use in pharmacopoeia. This knowledge will allow the prediction and measurement of interactions between polymers and APIs and therefore a rational choice of polymer grade to enhance the solid state stability of ASDs.

In situ solid-state NMR characterization of pharmaceutical materials: An example of drug-polymer thermal mixing

Pharmaceutical amorphous solid dispersions, a multicomponent system prepared by dispersing drug substances into polymeric matrix via thermal and mechanical processes, represent a major platform to deliver the poorly water-soluble drug. Microscopic properties of drug-polymer contacts play mechanistic roles in manipulating long-term physical stability as well as dissolution profiles. Although solid-state nuclear magnetic resonance has been utilized as an indispensable tool to probe structural details, previous studies are limited to ex situ characterizations. Our work provides likely the first documented example to investigate comelting of ketoconazole and polyacrylic acid, as a model system, in an in situ manner. Their physical mixture is melted and mixed in the solid-state nuclear magnetic resonance rotor under magic angle spinning at up to approximately 400 K. Critical structural events of molecular miscibility and interaction have been successfully identified. These results design and evaluate the instrumental and experimental protocols for real-time characterizations of the comelting of pharmaceutical materials.

Solid State NMR Study of the Mixing Degree Between Ginkgo Biloba Extract and a Soy-Lecithin-Phosphatidylserine in a Composite Prepared by the Phytosome® Method

Leaves extract of Ginkgo biloba, known in China since the most ancient times, has been widely used in the area of senile dementia thanks to its improving effects on cognitive function. A promising formulation of this botanical ingredient consists in a Ginkgo biloba-soy-lecithin-phosphatidylserine association obtained by the Phytosome® process. The precise assessment of the mixing degree between Ginkgo biloba and soy-lecithin-phosphatidylserine in this formulation is an important piece of information for understanding the reasons of its final performances. To this aim in the present study we carried out for the first time a Solid State Nuclear Magnetic Resonance investigation on Ginkgo biloba-soy-lecithin-phosphatidylserine association, on its constituents and on a mechanical mixture. The analysis of different observables highlighted a very intimate mixing (domains of single components not larger than 60 nm) of Ginkgo biloba and soy-lecithin-phosphatidylserine in their association obtained by Phytosome® process, together with a slight modification of their molecular dynamics, not observed in the case of the mechanical mixture.

Polymorphic Forms of Valinomycin Investigated by NMR Crystallography

A dodecadepsipeptide valinomycin (VLM) has been most recently reported to be a potential anti-coronavirus drug that could be efficiently produced on a large scale. It is thus of importance to study solid-phase forms of VLM in order to be able to ensure its polymorphic purity in drug formulations. The previously available solid-state NMR (SSNMR) data are combined with the plane-wave DFT computations in the NMR crystallography framework. Structural/spectroscopical predictions (the PBE functional/GIPAW method) are obtained to characterize four polymorphs of VLM. Interactions which confer a conformational stability to VLM molecules in these crystalline forms are described in detail. The way how various structural factors affect the values of SSNMR parameters is thoroughly analyzed, and several SSNMR markers of the respective VLM polymorphs are identified. The markers are connected to hydrogen bonding effects upon the corresponding (13C/15N/1H) isotropic chemical shifts of (CO, Namid, Hamid, Hα) VLM backbone nuclei. These results are expected to be crucial for polymorph control of VLM and in probing its interactions in dosage forms.

Molecular Mechanism of Crystalline-to-Amorphous Conversion of Pharmaceutical Solids from 19F Magic Angle Spinning NMR

Crystalline and amorphous materials usually possess distinct physicochemical properties due to major variations in long-range and local molecular packings. Enhanced fundamental knowledge of the molecular details of crystalline-to-amorphous interconversions is necessary to correlate the intermolecular structure to material properties and functions. While crystal structures can be readily obtained by X-ray crystallography, the microstructure of amorphous materials has rarely been explored due to a lack of high-resolution techniques capable of probing local molecular structures. Moreover, there is increasing interest in understanding the molecular nature of amorphous solids in pharmaceutical sciences due to the widespread utilization of amorphous active pharmaceutical ingredients (APIs) in pharmaceutical development for solubility and bioavailability enhancement. In this study, we explore multidimensional ¹³C and ¹⁹F magic angle spinning (MAS) NMR spectroscopy to study the molecular packing of amorphous posaconazole (POSA) in conjunction with the crystalline counterpart. Utilizing methods integrating homonuclear and heteronuclear ¹H, ¹³C, and ¹⁹F correlation spectroscopy and atomic ¹⁹F-to-¹³C distance measurements, we identified the major differences in molecular packing between crystalline and amorphous POSA. The intermolecular "head-to-head" interaction along the molecule's major axis, as well as the "head-to-tail" molecular packing perpendicular to the major axis in POSA crystals, was recapitulated by MAS NMR. Furthermore, critical intermolecular distances in the crystal lattice were determined. Most importantly, the head-to-tail contact of two neighboring molecules was found to be preserved in amorphous POSA, suggesting localized molecular order, whereas crucial interactions for head-to-head packing are absent in the amorphous form resulting in long-range disorder. Our study, likely one of the first documented examples, provides molecular-level structural details to understand the molecular mechanism of crystalline-to-amorphous conversion of fluorine-containing drug substances occurring in drug processing and development and establish a high-resolution experimental protocol for investigating amorphous materials.

NMR crystallography of molecular organics

Developments of NMR methodology to characterise the structures of molecular organic structures are reviewed, concentrating on the previous decade of research in which density functional theory-based calculations of NMR parameters in periodic solids have become widespread. With a focus on demonstrating the new structural insights provided, it is shown how "NMR crystallography" has been used in a spectrum of applications from resolving ambiguities in diffraction-derived structures (such as hydrogen atom positioning) to deriving complete structures in the absence of diffraction data. As well as comprehensively reviewing applications, the different aspects of the experimental and computational techniques used in NMR crystallography are surveyed. NMR crystallography is seen to be a rapidly maturing subject area that is increasingly appreciated by the wider crystallographic community.

Fast Acquisition of Proton-Detected HETCOR Solid-State NMR Spectra of Quadrupolar Nuclei and Rapid Measurement of NH Bond Lengths by Frequency Selective HMQC and RESPDOR Pulse Sequences

Fast magic-angle spinning (MAS), frequency selective (FS) heteronuclear multiple quantum coherence (HMQC) experiments which function in an analogous manner to solution SOFAST HMQC NMR experiments, are demonstrated. Fast MAS enables efficient FS excitation of ¹ H solid-state NMR signals. Selective excitation and observation preserves ¹ H magnetization, leading to a significant shortening of the optimal inter-scan delay. Dipolar and scalar ¹ H{¹⁴ N} FS HMQC solid-state NMR experiments routinely provide 4- to 9-fold reductions in experiment times as compared to conventional ¹ H{¹⁴ N} HMQC solid-state NMR experiments. ¹ H{¹⁴ N} FS resonance-echo saturation-pulse double-resonance (RESPDOR) allowed dipolar dephasing curves to be obtained in minutes, enabling the rapid determination of NH dipolar coupling constants and internuclear distances. ¹ H{¹⁴ N} FS RESPDOR was used to assign multicomponent active pharmaceutical ingredients (APIs) as salts or cocrystals. FS HMQC also provided enhanced sensitivity for ¹ H{¹⁷ O} and ¹ H{³⁵ Cl} HMQC experiments on ¹⁷ O-labeled Fmoc-alanine and histidine hydrochloride monohydrate, respectively. FS HMQC and FS RESPDOR experiments will provide access to valuable structural constraints from materials that are challenging to study due to unfavorable relaxation times or dilution of the nuclei of interest.

Local Structural Effects Due to Micronization and Amorphization on an HIV Treatment Active Pharmaceutical Ingredient

Processing procedures for inducing domain size reduction and/or amorphous phase generation can be crucial for enhancing the bioavailability of active pharmaceutical ingredients (APIs). It is important to quantify these reduced coherence phases and to detect and characterize associated structural changes, to ensure that no deleterious effects on safety, function, or stability occur. Here, X-ray powder diffraction (XRPD), total scattering pair distribution function (TSPDF) analysis, and solid-state nuclear magnetic resonance spectroscopy (SSNMR) have been performed on samples of GSK2838232B, an investigational drug for the treatment of human immunodeficiency virus (HIV). Preparations were obtained through different mechanical treatments resulting in varying extents of domain size reduction and amorphous phase generation. Completely amorphous formulations could be prepared by milling and microfluidic injection processes. Microfluidic injection was shown to result in a different local structure due to dispersion with dichloromethane (DCM). Implications of combined TSPDF and SSNMR studies to characterize molecular compounds are also discussed, in particular, the possibility to obtain a thorough structural understanding of disordered samples from different processes.

Probing the Molecular-Level Interactions in an Active Pharmaceutical Ingredient (API) - Polymer Dispersion and the Resulting Impact on Drug Product Formulation

PURPOSE

An investigation of underlying mechanisms of API-polymer interaction patterns has the potential to provide valuable insights for selecting appropriate formulations with superior physical stability and processability.

MATERIALS AND METHODS

In this study, copovidone was used as a polymeric carrier for several model compounds including clotrimazole, nifedipine, and posaconazole. The varied chemical structures conferred the ability for the model compounds to form distinct interactions with copovidone. Rheology and nuclear magnetic resonance (NMR) were combined to investigate the molecular pattern and relative strength of active pharmaceutical ingredient (API)-polymer interactions. In addition, the impact of the interactions on formulation processability via hot melt extrusion (HME) and physical stability were evaluated.

RESULTS

The rheological response of an API-polymer system was found to be highly sensitive to API-polymer interaction, depending both on API chemistry and API-polymer miscibility. In the systems studied, dispersed API induced a stronger plasticizer effect on the polymer matrix compared to crystalline/aggregated API. Correspondingly, the processing torque via HME showed a proportional relationship with the maximum complex viscosity of the API-polymer system. In order to quantitatively evaluate the relative strength of the API-polymer interaction, homogeneously dispersed API-polymer amorphous samples were prepared by HME at an elevated temperature. DSC, XRD, and rheology were employed to confirm the amorphous integrity and homogeneity of the resultant extrudates. Subsequently, the homogeneously dispersed API-polymer amorphous dispersions were interrogated by rheology and NMR to provide a qualitative and quantitative assessment of the nature of the API-polymer interaction, both macroscopically and microscopically. Rheological master curves of frequency sweeps of the extrudates exhibited a strong dependence on the API chemistry and revealed a rank ordering of the relative strength of API-copovidone interactions, in the order of posaconazole > nifedipine > clotrimazole. NMR data provided the means to precisely map the API-polymer interaction pattern and identify the specific sites of interaction from a molecular perspective. Finally, the impact of API-polymer interactions on the physical stability of the resultant extrudates was studied.

CONCLUSION

Qualitative and quantitative evaluation of the relative strength of the API-polymer interaction was successfully accomplished by utilizing combined rheology and NMR. Graphical Abstract.

14N–1H HMQC solid-state NMR as a powerful tool to study amorphous formulations – an exemplary study of paclitaxel loaded polymer micelles

¹⁴N–¹H HMQC experiments are powerful experiments to characterize amorphous drug–polymer formulations of paclitaxel yielding well-separated signals in the ¹⁴N dimension as well as information on the symmetry of ¹⁴N and ¹⁴N–¹H interactions.

Molecular packing of pharmaceuticals analyzed with paramagnetic relaxation enhancement and ultrafast magic angle pinning NMR

Probing molecular details of fluorinated pharmaceutical compounds at a faster acquisition utilizing paramagnetic relaxation enhancement and better resolution from ultrafast magic angle spinning (ν_rot = 110 kHz) and high magnetic field (B₀ = 18.8 T).

Analysis of HMQC experiments applied to a spin ½ nucleus subject to very large CSA

The acquisition of solid-state NMR spectra of "heavy" spin I = 1/2 nuclei, such as ¹¹⁹Sn, ¹⁹⁵Pt, ¹⁹⁹Hg or ²⁰⁷Pb can often prove challenging due to the presence of large chemical shift anisotropy (CSA), which can cause significant broadening of spectral lines. However, previous publications have shown that well-resolved spectra can be obtained via inverse ¹H detection using HMQC experiments in combination with fast magic angle spinning. In this work, the efficiencies of different ¹⁹⁵Pt excitation schemes are analyzed using SIMPSON numerical simulations and experiments performed on cis- and transplatin samples. These schemes include: hard pulses (HP), selective long pulses (SLP) and rotor-synchronized DANTE trains of pulses. The results show that for spectra of species with very large CSA, HP is little efficient, but that both DANTE and SLP provide efficient excitation profiles over a wide range of CSA values. In particular, it is revealed that the SLP scheme is highly robust to offset, pulse amplitude and length, and is simple to set up. These factors make SLP ideally suited to widespread use by "non-experts" for carrying out analyses of materials containing "heavy" spin I = 1/2 nuclei that are subject to very large CSAs. Finally, the existence of an "intermediate" excitation regime, with an rf-field strength in between those of HP and SLP, which is effective for large CSA, is demonstrated. It must be noted that in some samples, multiple sites may exist with very different CSAs. This is the case for ¹⁹⁵Pt species with either square-planar or octahedral structures, with large or small CSA, respectively. These two types of CSAs can only be excited simultaneously with DANTE trains, which scale up the effective rf-field. Another way to obtain all the information is to perform two different experiments: one with SLP and the second with HP to excite the sites with moderate/large and small/moderate CSAs, respectively. These two complementary experiments, recorded with two different spinning speeds, can also be used to discriminate the center-band resonances from the spinning sidebands.

Quantitative analysis of 14N quadrupolar coupling using 1H detected 14N solid-state NMR

Magic-angle spinning solid-state NMR is increasingly utilized to study the naturally abundant, spin-1 nucleus 14N, providing insights into the structure and dynamics of biological and organic molecules. In particular, the characterisation of 14N sites using indirect detection has proven useful for complex molecules, where the 'spy' nucleus provides enhanced sensitivity and resolution. Here we exploit the sensitivity of proton detection, to indirectly characterise 14N sites using a moderate rf field to generate coherence between the 1H and 14N at moderate and fast-magic-angle spinning frequencies. Efficient numerical simulations have been developed that have allowed us to quantitatively analyse the resulting 14N lineshapes to determine both the size and asymmetry of the quadrupolar interaction. Exploiting only naturally occurring abundant isotopes will aid the analysis of materials with the need to resort to isotope labelling, whilst providing additional insights into the structure and dynamics that the characterisation of the quadrupolar interaction affords.

Magnetization transfer from protons to quadrupolar nuclei in solid-state NMR using PRESTO or dipolar-mediated refocused INEPT methods

In solid-state NMR spectroscopy, the through-space transfer of magnetization from protons to quadrupolar nuclei is employed to probe proximities between those isotopes. Furthermore, such transfer, in conjunction with Dynamic Nuclear Polarization (DNP), can enhance the NMR sensitivity of quadrupolar nuclei, as it allows the transfer of DNP-enhanced ¹H polarization to surrounding nuclei. We compare here the performances of two approaches to achieve such transfer: PRESTO (Phase-shifted Recoupling Effects a Smooth Transfer of Order), which is currently the method of choice to achieve the magnetization transfer from protons to quadrupolar nuclei and which has been shown to supersede Cross-Polarization under Magic-Angle Spinning (MAS) for quadrupolar nuclei and D-RINEPT (Dipolar-mediated Refocused Insensitive Nuclei Enhanced by Polarization Transfer) using symmetry-based SR4₁² recoupling, which has already been employed to transfer the magnetization in the reverse way from half-integer quadrupolar spin to protons. We also test the PRESTO sequence with R16₇⁶ recoupling using 270₀90₁₈₀ composite π-pulses as inversion elements. This recoupling scheme, which has previously been proposed to reintroduce ¹H Chemical Shift Anisotropy (CSA) at high MAS frequencies with high robustness to rf-field inhomogeneity, has not so far been employed to reintroduce dipolar couplings with protons. These various techniques to transfer magnetization from protons to quadrupolar nuclei are analyzed using (i) an average Hamiltonian theory, (ii) numerical simulations of spin dynamics, and (iii) experimental ¹H → ²⁷Al and ¹H → ¹⁷O transfers in as-synthesized AlPO₄-14 and ¹⁷O-labelled fumed silica, respectively. The experiments and simulations are done at two magnetic fields (9.4 and 18.8 T) and several spinning speeds (15, 18-24 and 60 kHz). This analysis indicates that owing to its γ-encoded character, PRESTO yields the highest transfer efficiency at low magnetic fields and MAS frequencies, whereas owing to its higher robustness to rf-field inhomogeneity and chemical shifts, D-RINEPT is more sensitive at high fields and MAS frequencies, notably for protons exhibiting large offset or CSA, such as those involved in hydrogen bonds.

Spectroscopic (FT-IR, FT-Raman, and 13C SS-NMR) and quantum chemical investigations to provide structural insights into nitrofurantoin–4-hydroxybenzoic acid cocrystals

Non-covalent interactions contribute considerably to the stability of cocrystals and have appreciable effects on their molecular geometry as well.

DNP-enhanced solid-state NMR spectroscopy of active pharmaceutical ingredients

Solid-state NMR spectroscopy has become a valuable tool for the characterization of both pure and formulated active pharmaceutical ingredients (APIs). However, NMR generally suffers from poor sensitivity that often restricts NMR experiments to nuclei with favorable properties, concentrated samples, and acquisition of one-dimensional (1D) NMR spectra. Here, we review how dynamic nuclear polarization (DNP) can be applied to routinely enhance the sensitivity of solid-state NMR experiments by one to two orders of magnitude for both pure and formulated APIs. Sample preparation protocols for relayed DNP experiments and experiments on directly doped APIs are detailed. Numerical spin diffusion models illustrate the dependence of relayed DNP enhancements on the relaxation properties and particle size of the solids and can be used for particle size determination when the other factors are known. We then describe the advanced solid-state NMR experiments that have been enabled by DNP and how they provide unique insight into the molecular and macroscopic structure of APIs. For example, with large sensitivity gains provided by DNP, natural isotopic abundance, ¹³ C-¹³ C double-quantum single-quantum homonuclear correlation NMR spectra of pure APIs can be routinely acquired. DNP also enables solid-state NMR experiments with unreceptive quadrupolar nuclei such as ² H, ¹⁴ N, and ³⁵ Cl that are commonly found in APIs. Applications of DNP-enhanced solid-state NMR spectroscopy for the molecular level characterization of low API load formulations such as commercial tablets and amorphous solid dispersions are described. Future perspectives for DNP-enhanced solid-state NMR experiments on APIs are briefly discussed.

Indirect detection of 10B (I = 3) overtone NMR at very fast magic angle spinning

The application of overtone nuclear magnetic resonance (OT NMR) to symmetric spin transitions of integer quadrupolar nuclei is of considerable interest since this transition is immune to the first-order quadrupolar interaction, thus resulting in narrow NMR lines. Owing to its roles in nature and its high natural abundance, ¹⁴N (I = 1) OT NMR has been explored, in which the indirect and/or direct acquisitions of ¹⁴N OT were experimentally demonstrated. However, other than ¹⁴N nucleus, no OT NMR observation of other integer quadrupolar nuclei has been reported in the literature. In this work, we extend the application of OT NMR to another integer quadrupolar nucleus, namely ¹⁰B (I = 3). However, this is not straightforward owing to the unfavorable characteristics of ¹⁰B isotope. Here, for the first time, we present the selective acquisition of ¹⁰B central (-1 ↔ +1) OT NMR via detection of ¹H nuclei on perborate monohydrate sample. Numerical calculations are in a good agreement with the experimental results. Both show that the optimal sensitivity is achieved when the carrier frequency is applied at the second OT spinning sideband, i.e. an offset of twice of the spinning frequency from the center band.