Five-dimensional optical recording mediated by surface plasmons in gold nanorods

Plasmon-mediated photocatalytic conversion in Au or Ag nanorod aggregates by surface-enhanced Raman spectroscopy

Plasmonic nanoparticles (NPs) hold considerable potential as photocatalysts owing to their robust light-matter interactions across diverse electromagnetic wavelengths, which significantly influence the photophysical characteristics of the adjacent molecular entities. Despite the widespread use of noble-metal NPs in surface-enhanced Raman scattering (SERS) applications, little is known about the kinetics of nanoparticle aggregation and how it affects their configurations. This study investigates the plasmon-driven photochemical conversion of 4-nitrobenzenethiol (NBT) to 4,4'-dimercaptoazobenzene (DMAB) on Au and Ag nanorods (NRs) through SERS. Significantly, photoconversion phenomena were observed on Ag NRs but not on Au NRs upon laser excitation at 633 nm. Finite-difference time-domain simulations revealed the presence of stronger electromagnetic fields on Ag NRs than on Au NRs. The aspect ratios and gaps between individual NPs in dimer configurations were determined to elucidate their effects on electromagnetic fields. The Ag NR dimer with an end-to-end configuration, an aspect ratio of 3.3, and a 1-nm gap exhibited the highest enhancement factor of 1.05 × 1012. Our results demonstrate that the primary contribution from diverse configurations in NR aggregates is the end-to-end configuration. The proposed NP design with adjustable parameters is expected to advance research in plasmonics, sensing, and wireless communications. These findings also contribute to the understanding of plasmon-driven photochemical processes in metallic nanostructures.

Scalable Multistep Imprinting of Multiplexed Optical Anti-counterfeiting Patterns with Hierarchical Structures

Multiplexed optical techniques with multichannel patterns provide powerful strategies for high-capacity anti-counterfeiting. However, it is still a big challenge to meet the demands of achieving high encryption levels, excellent readability, and simple preparation simultaneously. Herein, we use a multistep imprinting technique, leveraging surface work-hardening to massively produce multiplexed encrypted patterns with hierarchical structures. These patterns with coupled nano- and microstructures can be instantaneously decoded into different pieces of information at different view angles under white light illumination. By incorporating perpendicular nano- and microgratings, we achieve four-channel encoded patterns, enhancing anti-counterfeiting capacity. This versatile method works on various metal/polymer materials, offering high-density information storage, direct visibility, broad material compatibility, and low-cost mass production. Our high-performance anti-counterfeiting patterns show significant potential in real-world applications.

Gold on the horizon: unveiling the chemistry, applications and future prospects of 2D monolayers of gold nanoparticles (Au-NPs)

Noble 2D monolayers of gold nanoparticles (Au-NPs) have garnered significant attention due to their unique physicochemical properties, which are instrumental in various technological applications. This review delves into the intricate physical chemistry underlying the formation of Au-NP monolayers, highlighting key interactions such as electrostatic forces, van der Waals attractions, and ligand-mediated stabilization. The discussion extends to the size- and shape-dependent assembly processes of these NP monolayers, elucidating how nanoparticle dimensions and morphologies influence monolayer formation and stability. Moreover, the review explores the diverse interfaces-solid, liquid, and air-where Au-NP monolayers are employed, each presenting distinct advantages and challenges. In the realm of applications, Au-NP monolayers have shown remarkable promises. In memory devices, their ability to facilitate high-density data storage through enhanced electron transport mechanisms is examined. Biosensing applications benefit from the monolayers' exceptional sensitivity and specificity, which are crucial for detecting biomolecular interactions. Furthermore, the role of Au-NP monolayers in electrocatalysis is explored, with a focus on their catalytic efficiency and stability in various electrochemical reactions. Despite their potential, the deployment of Au-NP monolayers faces several challenges. The review addresses current limitations such as scalability, reproducibility, and long-term stability, proposing potential strategies to overcome these hurdles. Future prospects are also discussed, including the development of multifunctional monolayers and integration with other nanomaterials to enhance performance across different applications. In conclusion, while significant strides have been made in understanding and utilizing 2D Au-NP monolayers, ongoing research is imperative to fully exploit their capabilities. Addressing existing challenges through innovative approaches will pave the way for their widespread adoption in advanced technological applications.

Lanthanide ion-doped upconversion nanoparticles for low-energy super-resolution applications

Energy-intensive technologies and high-precision research require energy-efficient techniques and materials. Lens-based optical microscopy technology is useful for low-energy applications in the life sciences and other fields of technology, but standard techniques cannot achieve applications at the nanoscale because of light diffraction. Far-field super-resolution techniques have broken beyond the light diffraction limit, enabling 3D applications down to the molecular scale and striving to reduce energy use. Typically targeted super-resolution techniques have achieved high resolution, but the high light intensity needed to outperform competing optical transitions in nanomaterials may result in photo-damage and high energy consumption. Great efforts have been made in the development of nanomaterials to improve the resolution and efficiency of these techniques toward low-energy super-resolution applications. Lanthanide ion-doped upconversion nanoparticles that exhibit multiple long-lived excited energy states and emit upconversion luminescence have enabled the development of targeted super-resolution techniques that need low-intensity light. The use of lanthanide ion-doped upconversion nanoparticles in these techniques for emerging low-energy super-resolution applications will have a significant impact on life sciences and other areas of technology. In this review, we describe the dynamics of lanthanide ion-doped upconversion nanoparticles for super-resolution under low-intensity light and their use in targeted super-resolution techniques. We highlight low-energy super-resolution applications of lanthanide ion-doped upconversion nanoparticles, as well as the related research directions and challenges. Our aim is to analyze targeted super-resolution techniques using lanthanide ion-doped upconversion nanoparticles, emphasizing fundamental mechanisms governing transitions in lanthanide ions to surpass the diffraction limit with low-intensity light, and exploring their implications for low-energy nanoscale applications.

Photothermal manipulation of the fringing field in gold nanorod dimers towards the apoptosis of cancerous cells

The possibility of coherent manipulation of optical and thermal energies in noble metal nanostructures has given birth to an enduring research arena coined by thermoplasmonics. Upon interaction with electromagnetic radiation, the energy of the produced hot electrons in metallic nanostructures is converted into heat and is transferred to the medium as a consequence of numerous relaxation processes. Gold nanorods have, often, been adopted as the classical anisotropic nanostructures owing to excellent shape-selective plasmonic tunability in the vis-NIR region. When a pair of metallic nanostructures are sufficiently close to each other to imbue electromagnetic interaction, there occurs evolution of collective plasmon modes, substantial enhancement of near field and strong squeezing of electromagnetic energy at the interparticle spatial region of the dimeric nanostructures. Recent advances in the 'tips and tricks' guide to assembling, even, anisotropic nanostructures in colloidal dispersions have offered the opportunity to interplay with the phenomenological plasmonic and thermal characteristics. The photothermal attributes emerging due to electromagnetic coupling of fringing fields have been explored considering parallel and perpendicular configurations of gold nanorod dimers as the prototypical systems from theoretical and experimental perspectives and their biomedical consequences have been realised in a mice model towards the photothermal apoptosis of cancerous cells.

Single-pulse three-dimensional parallel recording in glass using a feedback system

High-quality three-dimensional computer-generated holograms (3D-CGHs) are crucial for programmable 3D femtosecond laser parallel recording (3D-FLPR). In this study, we introduced an innovative feedback approach for the rapid optimization of 3D-CGHs by incorporating the superposition of the calculated lens phases (CLPs) onto the 3D-CGHs within a feedback system. This feedback system, governed by coordinated control of a spatial light modulator (SLM) and a camera, served to avoid the poor quality of the ordinary CGH system. As a result, we successfully demonstrated coaxial 3D-FLPR in Ag-doped phosphate glass solely using a single fs laser pulse. Additionally, we regulated the energy distribution of the generated 3D multi-focus (3D-MF) to compensate the laser energy losses inside the glass. The presented single-pulse 3D parallel recording indicated the significant advancement facilitated by our method, particularly in enhancing the writing efficiency of optical storage.

7D High-Dynamic Spin-Multiplexing

Multiplexing technology creates several orthogonal data channels and dimensions for high-density information encoding and is irreplaceable in large-capacity information storage, and communication, etc. The multiplexing dimensions are constructed by light attributes and spatial dimensions. However, limited by the degree of freedom of interaction between light and material structure parameters, the multiplexing dimension exploitation method is still confused. Herein, a 7D Spin-multiplexing technique is proposed. Spin structures with four independent attributes (color center type, spin axis, spatial distribution, and dipole direction) are constructed as coding basic units. Based on the four independent spin physical effects, the corresponding photoluminescence wavelength, magnetic field, microwave, and polarization are created into four orthogonal multiplexing dimensions. Combined with the 3D of space, a 7D multiplexing method is established, which possesses the highest dimension number compared with 6 dimensions in the previous study. The basic spin unit is prepared by a self-developed laser-induced manufacturing process. The free state information of spin is read out by four physical quantities. Based on the multiple dimensions, the information is highly dynamically multiplexed to enhance information storage efficiency. Moreover, the high-dynamic in situ image encryption/marking is demonstrated. It implies a new paradigm for ultra-high-capacity storage and real-time encryption.

Application progress of nanomaterials in the treatment of prostate cancer

Prostate cancer is one of the most common malignant tumors in men, which seriously threatens the survival and quality of life of patients. At present, there are serious limitations in the treatment of prostate cancer, such as drug tolerance, drug resistance and easy recurrence. Sonodynamic therapy and chemodynamic therapy are two emerging tumor treatment methods, which activate specific drugs or sonosensitizers through sound waves or chemicals to produce reactive oxygen species and kill tumor cells. Nanomaterials are a kind of nanoscale materials with many excellent physical properties such as high targeting, drug release regulation and therapeutic monitoring. Sonodynamic therapy and chemodynamic therapy combined with the application of nanomaterials can improve the therapeutic effect of prostate cancer, reduce side effects and enhance tumor immune response. This article reviews the application progress of nanomaterials in the treatment of prostate cancer, especially the mechanism, advantages and challenges of nanomaterials in sonodynamic therapy and chemodynamic therapy, which provides new ideas and prospects for research in this field.

Color Generation and Polarization-Sensitive Encryption by Laser Writing on Plasmonic Reflector Arrays

Plasmonic color printing presents a sustainable solution for vibrant and durable color reproduction by leveraging the light-manipulating properties of nanostructures. However, the fabrication of plasmonic nanostructures has posed challenges, hindering widespread adoption. In this paper, we introduce plasmonic reflector arrays (PRAs) composed of three layers─Ag nanoparticles (NPs), an Al2O3 spacer, and an Ag reflector─deposited via physical vapor deposition (PVD). By employing nanosecond and femtosecond laser writing techniques, we manipulate the surface morphology of silver nanoparticles on PRAs, resulting in a diverse range of structural colors that are both polarization-insensitive and polarization-sensitive. Furthermore, we demonstrate the versatility of nanosecond laser writing in creating intricate patterns on PRAs. Additionally, we propose a novel two-step method combining nanosecond and femtosecond laser processing to embed QR code patterns into PRAs, showcasing their potential for secure data encryption and transmission. This research underscores the promising applications of PRAs in advanced color printing and secure optical data encoding.

Deep-trap persistent materials for future rewriteable optical information storage

Deep-trap persistent luminescent (PersL) materials with enriched traps, which allow signals to quickly write-in and read-out with low-energy consumption, are one of the most promising materials for information storage. In this review, considering the demand for optical information storage, we provide comprehensive insights into the data storage mechanism of PersL materials. Particularly, we focus on various "trap-state tuning" strategies involving doping to design new deep-trap persistent phosphors with controlled carrier trapping-de-trapping for non-volatile and high-capacity information storage. Subsequently, various recent significant strategies, including wavelength-multiplexing, intensity-multiplexing, mechanical-multiplexing, and three-dimensional and multidimensional trap-multiplexing technologies for improving the information storage capacity of PersL phosphors are highlighted. Finally, the challenges and opportunities regarding optical information storage by PersL materials are discussed. We hope that this review will provide new insights for the future development of PersL materials in the field of optical data storage.

Arbitrarily rotating polarization direction and manipulating phases in linear and nonlinear ways using programmable metasurface

Independent controls of various properties of electromagnetic (EM) waves are crucially required in a wide range of applications. Programmable metasurface is a promising candidate to provide an advanced platform for manipulating EM waves. Here, we propose an approach that can arbitrarily control the polarization direction and phases of reflected waves in linear and nonlinear ways using a stacked programmable metasurface. Further, we extend the space-time-coding theory to incorporate the dimension of polarization, which provides an extra degree of freedom for manipulating EM waves. As proof-of-principle application examples, we consider polarization rotation, phase manipulation, and beam steering at linear and nonlinear frequencies. For validation, we design, fabricate, and measure a metasurface sample. The experimental results show good agreement with theoretical predictions and simulations. The proposed approach has a wide range of applications in various areas, such as imaging, data storage, and wireless communication.

Exploring structural and optical properties of a new series of soft salts based on cyclometalated platinum complexes

A series of nine new soft salts based on two platinum(II) complexes, namely ([Pt(C^N)(CN)2]-[Pt(C^N)(en)]+) (en = ethane-1,2-diamine), has been developed and synthesized. Their photophysical properties in both solution and the solid state were described. All soft salt complexes exhibit phosphorescence emission with PLQY in the solid state up to 0.36. Most of these materials displayed aggregation-induced emission (AIE) or aggregation-induced emission enhancement (AIEE) in water/DMSO solutions as the water ratio increased. Structure-property relationships were analyzed in relation to emission properties. The presence of the free nitrogen atoms in soft salt complexes with a C^N pyrimidine-based ligand allowed for reversible sensitivity to acidic vapors, resulting in the quenching of phosphorescence emission. Additionally, for selected soft salts, we described reversible vapochromism behaviour, making these new materials interesting for multi-detection purposes in anti-counterfeiting applications.

Angle-Multiplexed 3D Photonic Superstructures with Multi-Directional Switchable Structural Color for Information Transformation, Storage, and Encryption

Creating photonic crystals that can integrate and switch between multiple structural color images will greatly advance their utility in dynamic information transformation, high-capacity storage, and advanced encryption, but has proven to be highly challenging. Here, it is reported that by programmably integrating newly developed 1D quasi-periodic folding structures into a 3D photonic crystal, the generated photonic superstructure exhibits distinctive optical effects that combine independently manipulatable specular and anisotropic diffuse reflections within a versatile protein-based platform, thus creating different optical channels for structural color imaging. The polymorphic transition of the protein format allows for the facile modulation of both folding patterns and photonic lattices and, therefore, the superstructure's spectral response within each channel. The capacity to manipulate the structural assembly of the superstructure enables the programmable encoding of multiple independent patterns into a single system, which can be decoded by the simple adjustment of lighting directions. The multifunctional utility of the photonic platform is demonstrated in information processing, showcasing its ability to achieve multimode transformation of information codes, multi-code high-capacity storage, and high-level numerical information encryption. The present strategy opens new pathways for achieving multichannel transformable imaging, thereby facilitating the development of emerging information conversion, storage, and encryption media using photonic crystals.

Photothermophoretic Splitting of Gold Nanoparticles for Plasmonic Nanopores and Nanonets Sensing

Optical processing of single plasmonic nanoparticles reinvents the way of high-density information storage, high-performance sensing, and high-definition displays. However, such laser-fabricated nanoplasmonics with well-defined hot spots remain elusive due to the diffraction limit of light. Here we show Au nanoparticle (NP) decorated nanopores can be facilely generated with photothermal splitting of single Au NPs embedded in a silica matrix. The extremely high local temperature induced by plasmonic heating renders gradients of the temperature and surface tension around the Au NP, which drives the nanoscale thermophoretic and Marangoni flow of molten Au/silica. As a result, a nanopore decorated with fragmented Au NPs is formed in the silica film, which presents much stronger surface-enhanced Raman scattering as compared to a single Au NP due to the emergence of hot spots. This strategy can be used to generate plasmonic nanopores of various sizes in the silicon nitride (SiNx) films, which further transforms into nanonets at ambient conditions via light-induced reconstruction of silicon nitride membrane. These nanonets can serve as a robust platform for single particle trapping and analysis.

Nanostructure-based orbital angular momentum encryption and multiplexing

The orthogonality among the OAM modes provides a new degree of freedom for optical multiplexing communications. So far, traditional Dammann gratings and spatial light modulators (SLMs) have been widely used to generate OAM beams by modulating electromagnetic waves at each pixel. However, such architectures suffer from limitations in terms of having a resolution of only a few microns and the bulkiness of the entire optical system. With the rapid development of the electromagnetic theory and advanced nanofabrication methods, artificial nanostructures, especially optical metasurfaces, have been introduced which greatly shrink the size of OAM multiplexing devices while increasing the level of integration. This review focuses on the study of encryption, multiplexing and demultiplexing of OAM beams based on nanostructure platforms. After introducing the focusing characteristics of OAM beams, the interaction mechanism between OAM beams and nanostructures is discussed. The physical phenomena of helical dichroism response and spatial separation of OAM beams achieved through nanostructures, setting the stage for OAM encryption and multiplexing, are reviewed. Afterward, the further advancements and potential applications of nanophotonics-based OAM multiplexing are deliberated. Finally, the challenges of conventional design methods and dynamic tunable techniques for nanostructure-based OAM multiplexing technology are addressed.

Probing Temperature-Induced Plasmonic Nonlinearity: Unveiling Opto-Thermal Effects on Light Absorption and Near-Field Enhancement

Precise measurement and control of local heating in plasmonic nanostructures are vital for diverse nanophotonic devices. Despite significant efforts, challenges in understanding temperature-induced plasmonic nonlinearity persist, particularly in light absorption and near-field enhancement due to the absence of suitable measurement techniques. This study presents an approach allowing simultaneous measurements of light absorption and near-field enhancement through angle-resolved near-field scanning optical microscopy with iterative opto-thermal analysis. We revealed gold thin films exhibit sublinear nonlinearity in near-field enhancement due to nonlinear opto-thermal effects, while light absorption shows both sublinear and superlinear behaviors at varying thicknesses. These observations align with predictions from a simple harmonic oscillation model, in which changes in damping parameters affect light absorption and field enhancement differently. The sensitivity of our method was experimentally examined by measuring the opto-thermal responses of three-dimensional nanostructure arrays. Our findings have direct implications for advancing plasmonic applications, including photocatalysis, photovoltaics, photothermal effects, and surface-enhanced Raman spectroscopy.

Sub-Diffraction Readout Method of High-Capacity Optical Data Storage Based on Polarization Modulation

The big data era demands an efficient and permanent data storage technology with the capacity of PB to EB scale. Optical data storage (ODS) offers a good candidate for long-lifetime storage, as the developing far-field super-resolution nanoscale writing technology improves its capacity to the PB scale. However, methods to efficiently read out this intensive ODS data are still lacking. In this paper, we demonstrate a sub-diffraction readout method based on polarization modulation, which experimentally achieves the sub-diffraction readout on Disperse Red 13 thin film with a resolution of 500 nm, exceeding the diffraction limit by 1.2 times (NA = 0.5). Differing from conventional binary encoding, we propose a specific polarization encoding method that enhances the capacity of ODS by 1.5 times. In the simulation, our method provides an optical data storage readout resolution of 150 nm, potentially to 70 nm, equivalent to 1.1 PB in a DVD-sized disk. This sub-diffraction readout method has great potential as a powerful readout tool for next-generation optical data storage.

Two-dimensional transmissive structural colors for high-security information encryption

Structural colors produced from nanostructures have attracted much attention due to their promising advantages of long-term stability and high resolution. Many nanostructures like metasurfaces have been demonstrated to generate color information in the transmission or reflection mode. Here, a strategy of combining polarization-insensitive and polarization-sensitive transmissive structural color is proposed to realize convenient and diverse encrypted pattern designs. A two-dimensional metasurface, whose polarization characteristics are determined by the size of a nanobrick unit, is embedded inside an optical cavity to produce transmissive structural color. The polarization-insensitive transmissive structural color exhibits a wide color gamut and high excitation purity in all polarization states, while the polarization-sensitive transmissive structural color maintains the similar color appearance in x-direction polarization but appears nearly black in y-direction polarization. Combining these two transmissive structural colors can achieve diverse images designed at different polarizations instead of simply hiding the image in a specific polarization state. An image of "flower and flowerpot" using the generated colors is visually illustrated, which shows that the proposed transmissive structural colors would have great potential in the areas of security information encryption.

A 3D nanoscale optical disk memory with petabit capacity

High-capacity storage technologies are needed to meet our ever-growing data demands1,2. However, data centres based on major storage technologies such as semiconductor flash devices and hard disk drives have high energy burdens, high operation costs and short lifespans2,3. Optical data storage (ODS) presents a promising solution for cost-effective long-term archival data storage. Nonetheless, ODS has been limited by its low capacity and the challenge of increasing its areal density4,5. Here, to address these issues, we increase the capacity of ODS to the petabit level by extending the planar recording architecture to three dimensions with hundreds of layers, meanwhile breaking the optical diffraction limit barrier of the recorded spots. We develop an optical recording medium based on a photoresist film doped with aggregation-induced emission dye, which can be optically stimulated by femtosecond laser beams. This film is highly transparent and uniform, and the aggregation-induced emission phenomenon provides the storage mechanism. It can also be inhibited by another deactivating beam, resulting in a recording spot with a super-resolution scale. This technology makes it possible to achieve exabit-level storage by stacking nanoscale disks into arrays, which is essential in big data centres with limited space.

Photothermal metasurface with polarization and wavelength multiplexing

Controlling temperature distribution at the micro/nano-scale brings new applications in many fields such as physics, chemistry and biology. This paper proposes a photothermal metasurface that employs polarization and wavelength multiplexing to regulate various temperature distributions at the micro/nano-scale. Such a photothermal metasurface is numerically validated by the finite element method. Firstly, the inversion algorithm is used to calculate the thermal power density distribution, which is decided by a given temperature distribution. Then, based on the bottom-up design method, (a) the library of absorption cross sections of gold nanoparticles is established by resizing nanoparticles; (b) the single pixel is constructed for wavelength and polarization multiplexing; (c) the overall structure of a photothermal metasurface is optimized and established. Finally, four given temperature distributions, combining the multiplexing of two orthogonal polarizations and two wavelengths, are achieved in the same area. The simulation results well confirm the feasibility of photothermal multiplexing. Such photothermal metasurface provides solutions for flexible control of temperature distribution at the micro/nano-scale.

Anomalous Dispersion in Reflection and Emission of Dye Molecules Strongly Coupled to Surface Plasmon Polaritons

We have studied dispersion of surface plasmon polaritons (SPPs) in the Kretschmann geometry (prism/Ag/dye-doped polymer) in weak, intermediate, and ultra-strong exciton-plasmon coupling regimes. The dispersion curves obtained in the reflection experiment were in good agreement with the simple model predictions at small concentrations of dye (Rhodamine 590, Rh590) in the polymer (Poly(methyl methacrylate), PMMA). At the same time, highly unusual multi-segment "staircase-like" dispersion curves were observed at extra-large dye concentrations, also in agreement with the simple theoretical model predicting large, small, and negative group velocities featured by different polariton branches. In a separate experiment, we measured angular dependent emission of Rh590 dye and obtained the dispersion curves consisting of two branches, one nearly resembling the SPP dispersion found in reflection and the second one almost horizontal. The results of our study pave the road to unparalleled fundamental science and future applications of weak and strong light-matter interactions.

Tuneable Anisotropic Plasmonics with Shape-Symmetric Conducting Polymer Nanoantennas

A wide range of nanophotonic applications rely on polarization-dependent plasmonic resonances, which usually requires metallic nanostructures that have anisotropic shape. This work demonstrates polarization-dependent plasmonic resonances instead by breaking symmetry via material permittivity. The study shows that molecular alignment of a conducting polymer can lead to a material with polarization-dependent plasma frequency and corresponding in-plane hyperbolic permittivity region. This result is not expected based only on anisotropic charge mobility but implies that also the effective mass of the charge carriers becomes anisotropic upon polymer alignment. This unique feature is used to demonstrate circularly symmetric nanoantennas that provide different plasmonic resonances parallel and perpendicular to the alignment direction. The nanoantennas are further tuneable via the redox state of the polymer. Importantly, polymer alignment could blueshift the plasma wavelength and resonances by several hundreds of nanometers, forming a novel approach toward reaching the ultimate goal of redox-tunable conducting polymer nanoantennas for visible light.

Multifunctional Organohydrogels for pH-Responsive Fluorescent and Electrostimulus Writing

Hydrogels have attracted widespread attention in anticounterfeiting due to their unique physical/chemical properties and designability. However, hydrogels' poor mechanical properties and sluggish response to chemical stimuli pose challenges for their wide application. A fluorescent tough organohydrogel capable of freeform writing of information is reported in this work. By incorporation of the fluorescent monomer 7-methylacryloxy-4-methylcoumarin into the polyacrylamide network in a covalently cross-linked manner while intertwining with the carboxymethyl cellulose sodium network, a fluorescent tough organohydrogel with a dual-network structure is prepared. The organohydrogel shows acid-base-mediated adjustable fluorescence through the transformation of fluorescent monomers. Ion printing and electrical stimulation design achieved free information storage and encryption. In addition, the prepared organohydrogel has good antifreezing properties and can be encrypted and decrypted at subzero temperatures. The encrypted information in the organohydrogel can be read only after UV-light irradiation. These patterned fluorescent organohydrogels should find applications in protected message displays for improved information security.

Entropy-driven formation of binary superlattices assembled from polymer-tethered nanorods and nanospheres

Integrating binary mixtures of nanoparticles (NPs) into well-defined superstructures gives rise to novel collective properties depending on the shapes and individual properties of both species. In this paper, we studied the entropy-driven formation of binary superlattices assembled from polymer-tethered nanorods and nanospheres. The results indicated that the conformational entropy of the polymer chains and the mixing entropy of the nanorods and nanospheres are two parameters that determine the formation of binary superlattices.

Mesoporous Silica-Encapsulated Gold Nanorods for Drug Delivery/Release and Two-Photon Excitation Fluorescence Imaging to Guide Synergistic Phototherapy and Chemotherapy

Photothermal therapy is a promising light-based medical treatment that relies on light absorption agents converting light irradiation into localized heat to destroy cancer cells or other diseased tissues. It is critical to enhance the therapeutic effects of cancer cell ablation for their practical applications. This study reports a high-performance combinational therapy for ablating cancer cells, including both photothermal therapy and chemotherapy to improve therapeutic efficiency. The prepared AuNR@mSiO2 loading molecular Doxorubicin (Dox) assemblies were highlighted by merits of facile acquisition, great stability, easy endocytosis, and rapid drug release in addition to improved anticancer capability upon irradiation with a femtosecond pulsed near-infrared (NIR) laser, where AuNR@mSiO2 nanoparticles afforded a high photothermal conversion efficiency of 31.7%. Two-photon excitation fluorescence imaging was introduced into confocal laser scanning microscope multichannel imaging to track the drug location and cell position in real time for monitoring the process of drug delivery in killing human cervical cancer HeLa cells and then to realize imaging-guiding cancer treatment. These nanoparticles exhibit widespread potential in photoresponsive utilizations including photothermal therapy, chemotherapy, one- and two-photon excited fluorescence imaging, and 3D fluorescence imaging and cancer treatment.

Coded aperture-based compressive data page for optical data storage

In an era of data explosion, optical data storage provides an alternative solution for cold data storage due to its energy-saving and cost-effective features. However, its data density is still insufficient for zettabyte-scale cold data storage. Here, a coded aperture-based compressive data page with a compression ratio of ≤0.125 is proposed. Based on two frameworks-weighted nuclear norm minimization (WNNM) and alternating direction method of multipliers (ADMM)-the decoded quality of the compressive data page is ensured by utilizing sparsity priors. In experiments, compressive data pages of a monochromatic photo-array, full-color photo, and dynamic video are accurately decoded.

Co-multiplexing spectral and temporal dimensions based on luminescent materials

Optical multiplexing is a pivotal technique for augmenting the capacity of optical data storage (ODS) and increasing the security of anti-counterfeiting. However, due to the dearth of appropriate storage media, optical multiplexing is generally restricted to a single dimension, thus curtailing the encoding capacity. Herein, the co-multiplexing spectral and temporal dimensions are proposed for optical encoding based on photoluminescence (PL) and persistent-luminescence (PersL) at four different wavelengths. Each emission color comprises four luminescence modes. The further multiplexing of four wavelengths leads to the maximum encoding capacity of 8 bits at each pixel. The wavelength difference between adjacent peaks is larger than 50 nm. The well-separated emission wavelengths significantly lower the requirements for high-resolution spectrometers. Moreover, the information is unable to be decoded until both PL and PersL spectra are collected, suggesting a substantial improvement in information security and the security level of anti-counterfeiting.

Large-Area Arrays of Polymer-Tethered Gold Nanorods with Controllable Orientation and Their Application in Nano-Floating-Gate Memory Devices

In this work, it is reported that large-area (centimeter-scale) arrays of non-close-packed polystyrene-tethered gold nanorod (AuNR@PS) can be prepared through a liquid-liquid interfacial assembly method. Most importantly, the orientation of AuNRs in the arrays can be controlled by changing the intensity and direction of electric field applied in the solvent annealing process. The interparticle distance of AuNR can be tuned by varying the length of polymer ligands. Moreover, the AuNR@PS with short PS ligand are favorited to form orientated arrays with the assistance of electric field, while long PS ligands make the orientation of AuNRs difficult. The orientated AuNR@PS arrays are employed as the nano-floating gate of field-effect transistor memory device. Tunable charge trapping and retention characteristics in the device can be realized by electrical pulse with visible light illumination. The memory device with orientated AuNR@PS array required less illumination time (1 s) at the same onset voltage in programming operation, compared to the control device with disordered AuNR@PS array (illumination time: 3 s). Moreover, the orientated AuNR@PS array-based memory device can maintain the stored data for more than 9000 s, and exhibits stable endurance characteristic without significant degradation in 50 programming/reading/erasing/reading cycles.

Photothermal Nanomaterials: A Powerful Light-to-Heat Converter

All forms of energy follow the law of conservation of energy, by which they can be neither created nor destroyed. Light-to-heat conversion as a traditional yet constantly evolving means of converting light into thermal energy has been of enduring appeal to researchers and the public. With the continuous development of advanced nanotechnologies, a variety of photothermal nanomaterials have been endowed with excellent light harvesting and photothermal conversion capabilities for exploring fascinating and prospective applications. Herein we review the latest progresses on photothermal nanomaterials, with a focus on their underlying mechanisms as powerful light-to-heat converters. We present an extensive catalogue of nanostructured photothermal materials, including metallic/semiconductor structures, carbon materials, organic polymers, and two-dimensional materials. The proper material selection and rational structural design for improving the photothermal performance are then discussed. We also provide a representative overview of the latest techniques for probing photothermally generated heat at the nanoscale. We finally review the recent significant developments of photothermal applications and give a brief outlook on the current challenges and future directions of photothermal nanomaterials.

Ultrafast Laser Plasmonic Fabrication of Nanocrystals by Molecule Modulation for Photoresponse Multifunctional Structures

Nanotechnology has attracted wide research attention in constructing functional devices, including integrated circuits, transparent electrodes, and flexible actuators. Bottom-up fabrication is an important approach for functional structure manufacture, however, the controllable fabrication of complex architectures for practical applications has long been a challenge. Here, a novel strategy of laser plasmonic fabrication based on glue molecule modulation is proposed that can assemble metal nanocrystals into interconnected pattern networks. The plasmonic response of nanocrystals is adjustable with molecule modulation, which is a benefit for the effective formation of laser-induced localized oscillating electrons. The further decomposition of molecules and the movement of nanocrystal surface atoms can achieve the coalescence of assembled nanocrystals. It demonstrates that complex architectures can be controllably constructed by molecule level modulation. Through molecule-assisted laser plasmonic fabrication, the functional nanocrystals with enhanced photothermal capacity can be used for information encryption and soft machinery. This work expands the knowledge of bottom-up fabrication and provides a method for designing functional nanocrystals for a wide range of applications.

Efficient ultrafast laser writing with elliptical polarization

Photosensitivity in nature is commonly associated with stronger light absorption. It is also believed that artificial optical anisotropy to be the strongest when created by light with linear polarization. Contrary to intuition, ultrafast laser direct writing with elliptical polarization in silica glass, while nonlinear absorption is about 2.5 times weaker, results in form birefringence about twice that of linearly polarized light. Moreover, a larger concentration of anisotropic nanopores created by elliptically polarized light pulses is observed. The phenomenon is interpreted in terms of enhanced interaction of circularly polarized light with a network of randomly oriented bonds and hole polarons in silica glass, as well as efficient tunneling ionization produced by circular polarization. Applications to multiplexed optical data storage and birefringence patterning in silica glass are demonstrated.

Laser polarization-controlled photoreduction of samarium ions in sodium aluminoborate glass

The valence state conversion of lanthanide ions induced by femtosecond laser fields has attracted considerable attention due to their potential applications in areas like high-density optical storage. However, the physical mechanisms involved in valence state conversions still remain unclear. Here, we report the first experimental study of controlling the reduction of trivalent samarium ions to divalent ones in sodium aluminoborate glass by varying the polarization status of the 800 nm femtosecond laser field. As the laser field is varied from linear to circular polarization, the reduction efficiency can be greatly decreased by about fifty percent. This polarization-dependent reduction behavior is found to directly correlate with the nonresonant two-photon 4f-4f absorption probability of the trivalent samarium ions in both experiment and theory. Multiphoton excited charge transfer between oxygen and samarium is considered to be responsible for the photoreduction. Our work demonstrates a controllable and effective way in tuning the valence state conversion efficiency and sheds light on the underlying mechanisms.

Femtosecond laser direct writing multilayer chiral waveplates with minimal linear birefringence

Chirality transfer from femtosecond laser direct writing in achiral transparent materials mainly originates from the interplay between anisotropic nanogratings and mechanical stress with non-parallel and non-perpendicular (oblique) neutral axes. Yet, the laser fabrication simultaneously induces non-negligible linear birefringence. For precise manipulation of circular polarization properties, as well as to unlock the full functionality, we report here a geometry-inspired multilayer method for direct writing of chiral waveplates with minimal linear birefringence. We perform a theoretical analysis of both circular and linear properties response for different multilayer configurations and achieve strong circular birefringence of up to -2.25 rad with an extinction ratio of circular birefringence to total linear birefringence of up to 5.5 dB at 550 nm. Our strategy enables the precise control of circular properties and provides a facile platform for chiral device exploration with almost no linear property existence.

Regulable Mixed-Solvent-Induced Phase Separation in Hydrogels for Information Encryption

The rapid progress of information technology is accompanied by plenty of information embezzlement and forgery, but developing advanced encryption technologies to ensure information security remains challenging. Phase separation commonly leads to a dramatic change in the transmittance of hydrophilic polymer networks, which is a potential method for information security but is often neglected. Here, taking the polyacrylamide (PAAm) hydrogel system as a typical example, facilely adjustable information encryption and decryption via its regulable phase separation process in ethanol/water mixed solvent, are reported. By controlling the osmotic pressure of the external and internal environment, it is demonstrated that the diffusion coefficient during deswelling and reswelling, as well as the corresponding change of transmittance of the gel, can be well controlled. Relatively high osmotic pressure leads to rapid phase separation of the initial gel but slow phase remixing of the phase-separated gel, opening the opportunity of applying the gel as a reversible information encryption device. As proof-of-concept demonstrations, several stable and reversible information encryption and decryption systems by making use of the phase separation process of the gels are designed, which are expected to inspire the development of next-generation soft devices for information technology.

Highly sensitive photopolymer for holographic data storage

The insufficient photosensitivity of conventional organic recording materials such as phenanthraquinone-doped poly(methyl methacrylate) (PQ/PMMA) significantly limits the recording speed in holographic data storage. Accelerating the formation of free radicals using the photosensitizer PQ during the photoreaction process and increasing the C = C double bond concentration of the matrix are effective methods for improving the photosensitivity. Using the above methods, we doped PQ/PMMA with the co-photoinitiator triethanolamine and co-monomer acrylamide to improve the photosensitivity of the material. Compared with the original PQ/PMMA material, the photosensitivity was increased by 10 times, and the diffraction efficiency was increased by 20%. The role of each doping component was studied by characterization and analysis. In addition, the introduction of the cross-linking agent N,N'-methylene-bisacrylamide, having high sensitivity, reduced the shrinkage of the material. We verified the application of the new material in a collinear system, and its high sensitivity showed its great potential for holographic data storage.

Faris H, Ahmed H, Mamdouh S, Thambiratnam K, Mohamed T. Using Femtosecond Laser Pulses to Explore the Nonlinear Optical Properties of Au NP Colloids That Were Synthesized by Laser Ablation

In this study, we experimentally investigated the nonlinear optical properties of Au nanoparticles (Au NPs) that were prepared in pure distilled water using the laser ablation method. The Au NPs were prepared using a nanosecond Nd:YAG laser with an ablation time of 5 or 10 min at a constant laser energy of 100 mJ. The structure and the linear optical properties of the Au NPs were investigated using a transmission electron microscope (TEM) and UV-visible spectrophotometer analysis, respectively. The TEM measurements showed that the average size of the Au NPs varied from 20.3 to 14.1 nm, depending on the laser ablation time. The z-scan technique was used to investigate the nonlinear refractive index (n2) and nonlinear absorption coefficient (γ) of the Au NPs, which were irradiated at different excitation wavelengths that ranged from 740 to 820 nm and at different average powers that ranged from 0.8 to 1.6 W. The Au NP samples exhibited a reverse saturable absorption (RSA) behavior that increased when the excitation wavelength and/or incident laser power increased. In addition, the Au NPs acted as a self-defocusing material whenever the excitation wavelength or incident power were modified.

Towards higher-dimensional structured light

Structured light refers to the arbitrarily tailoring of optical fields in all their degrees of freedom (DoFs), from spatial to temporal. Although orbital angular momentum (OAM) is perhaps the most topical example, and celebrating 30 years since its connection to the spatial structure of light, control over other DoFs is slowly gaining traction, promising access to higher-dimensional forms of structured light. Nevertheless, harnessing these new DoFs in quantum and classical states remains challenging, with the toolkit still in its infancy. In this perspective, we discuss methods, challenges, and opportunities for the creation, detection, and control of multiple DoFs for higher-dimensional structured light. We present a roadmap for future development trends, from fundamental research to applications, concentrating on the potential for larger-capacity, higher-security information processing and communication, and beyond.

An Optical/Ferroelectric Multiplexing Multidimensional Nonvolatile Memory from Ferroelectric Polymer

Multiplexing physical dimensions to realize multidimensional storage in a single material has been a goal to increase storage density and data security. Multidimensional storage is only achieved in optical storage material (OSM) by far. Poly(vinylidene fluoride) (PVDF), a semicrystalline polymer, is widely studied as a candidate for ferroelectric random access (FeRAM). Herein, the atomic force microscopy (AFM)-based infrared spectroscopy techniqueis used to induce multilevel phase transformations in PVDF ultrathin film on nanometric scales and for writing/readout of IR signals. An optical/ferroelectric multiplexing PVDF memory, where information can be coded with independent four-level optical IR and bilevel ferroelectric signals, is demonstrated. High data security and a storage density up to 180 GBit in.^-2 are achieved simultaneously. Owing to the different critical temperature for phase transformation (optical data, <167 °C) and polarization switching (ferroelectric data, <100 °C), the multiplexing memory can function both as optical read-only memory and FeRAM. This work expands material supporting physical dimensions multiplexing beyond OSM for the first time, opening up new opportunities for future high-capacity, multifunctional nano-memory. The strategy proposed here enables on-demand and tunable programming on IR waves, offering prospects for fabrication of active nano-optical devices.

Two-Photon-Excited Single-Molecule Fluorescence Enhanced by Gold Nanorod Dimers

We demonstrate two-photon-excited single-molecule fluorescence enhancement by single end-to-end self-assembled gold nanorod dimers. We employed biotinylated streptavidin as the molecular linker, which connected two gold nanorods in end-to-end fashion. The typical size of streptavidin of around 5 nm separates the gold nanorods with gaps suitable for the access of fresh dyes in aqueous solution, yet small enough to give very high two-photon fluorescence enhancement. Simulations show that enhancements of more than 7 orders of magnitude can be achieved for two-photon-excited fluorescence in the plasmonic hot spots. With such high enhancements, we successfully detect two-photon-excited fluorescence for a common organic dye (ATTO 610) at the single-molecule, single-nanoparticle level.

Lanthanide-doped heterostructured nanocomposites toward advanced optical anti-counterfeiting and information storage

The continuously growing importance of information storage, transmission, and authentication impose many new demands and challenges for modern nano-photonic materials and information storage technologies, both in security and storage capacity. Recently, luminescent lanthanide-doped nanomaterials have drawn much attention in this field because of their photostability, multimodal/multicolor/narrowband emissions, and long luminescence lifetime. Here, we report a multimodal nanocomposite composed of lanthanide-doped upconverting nanoparticle and EuSe semiconductor, which was constructed by utilizing a cation exchange strategy. The nanocomposite can emit blue and white light under 365 and 394 nm excitation, respectively. Meanwhile, the nanocomposites show different colors under 980 nm laser excitation when the content of Tb³⁺ ions is changed in the upconversion nanoparticles. Moreover, the time-gating technology is used to filter the upconversion emission of a long lifetime from Tb³⁺ or Eu³⁺, and the possibilities for modulating the emission color of the nanocomposites are further expanded. Based on the advantage of multiple tunable luminescence, the nanocomposites are designed as optical modules to load optical information. This work enables multi-dimensional storage of information and provides new insights into the design and fabrication of next-generation storage materials.

A Photocatalytic Hydrolysis and Degradation of Toxic Dyes by Using Plasmonic Metal–Semiconductor Heterostructures: A Review

Converting solar energy to chemical energy through a photocatalytic reaction is an efficient technique for obtaining a clean and affordable source of energy. The main problem with solar photocatalysts is the recombination of charge carriers and the large band gap of the photocatalysts. The plasmonic noble metal coupled with a semiconductor can give a unique synergetic effect and has emerged as the leading material for the photocatalytic reaction. The LSPR generation by these kinds of materials has proved to be very efficient in the photocatalytic hydrolysis of the hydrogen-rich compound, photocatalytic water splitting, and photocatalytic degradation of organic dyes. A noble metal coupled with a low bandgap semiconductor result in an ideal photocatalyst. Here, both the noble metal and semiconductor can absorb visible light. They tend to produce an electron–hole pair and prevent the recombination of the generated electron–hole pair, which ultimately reacts with the chemicals in the surrounding area, resulting in an enhanced photocatalytic reaction. The enhanced photocatalytic activity credit could be given to the shared effect of the strong SPR and the effective separation of photogenerated electrons and holes supported by noble metal particles. The study of plasmonic metal nanoparticles onto semiconductors has recently accelerated. It has emerged as a favourable technique to master the constraint of traditional photocatalysts and stimulate photocatalytic activity. This review work focuses on three main objectives: providing a brief explanation of plasmonic dynamics, understanding the synthesis procedure and examining the main features of the plasmonic metal nanostructure that dominate its photocatalytic activity, comparing the reported literature of some plasmonic photocatalysts on the hydrolysis of ammonia borane and dye water treatment, providing a detailed description of the four primary operations of the plasmonic energy transfer, and the study of prospects and future of plasmonic nanostructures.

Highly Sensitive Photopolymer for Holographic Data Storage Containing Methacryl Polyhedral Oligomeric Silsesquioxane

Herein, via introducing eight methacryl polyhedral oligomeric silsesquioxane (Ma-POSS), we dramatically enhance the holographic performance of phenanthraquinone-doped poly(methyl methacrylate) (PQ/PMMA) photopolymer with excellent characteristics of high sensitivity, high diffraction efficiency, and neglectable volume shrinkage for holographic data storage, the photosensitivity, diffraction efficiency, and volume shrinkage reaching 1.47 cm/J, ∼75%, and ∼0.09%, respectively. Ma-POSS here dramatically enhances the photosensitivity ∼5.5 times, diffraction efficiency more than 50%, and suppressed the volume shrinkage over 4 times. Further analysis reveals that Ma-POSS obviously increased the molecular weight by grafting PMMA to be a star-shaped macromolecule. And the residual C═C of POSS-PMMA dramatically increased the photosensitivity. Moreover, the star-shaped POSS-PMMA acting as a plasticizer dramatically enhances the mechanical properties and so reduces the photoinduced volume shrinkage of PQ/PMMA. Finally, by the use of the POSS-PMMA/PQ in a collinear holography system, it appeared to be promising for a fast but low bit error rate in holographic information storage. The current study thence has not only successfully synthesized photopolymer materials with potential for highly sensitive holographic storage applications but also investigated the microphysical mechanism of the impact of Ma-POSS on the holographic properties of PQ/PMMA photopolymer and clarified the thermal- and photoreaction processes of the POSS-PMMA/PQ photopolymer.

Vivid Structural Color Macropatterns Created by Flexible Nanopainting of Ultrafast Lasers

Structural colors based on the macro- or nanostructure formation are ubiquitous in nature, having great prospects in many fields as a result of their environmentally friendly and long-term stable characteristics compared to pigments or dyes. However, the current fabrication techniques still face challenges for the generation of high-quality structural color patterns, especially at the macroscale, in an efficient way. Here, we demonstrate a method that exploits a flexible scanning process of generating macropatterns to convert the contour profiles into well-defined sub-micrometer grating structures with unprecedented vivid structural colors, at high speed and low cost on the graphene oxide film. The nature of dynamic beam shaping of the laser line spot allows us to flexibly construct the complex patterns at high speed, in sharp contrast to the traditional point-by-point laser processing. Moreover, the multicolor display of the patterns can be carried out by simply modulating the laser polarization to change the orientation of the sub-micrometer structures, and this nanopainting strategy is further explored to flexibly design the composite image for potential anti-counterfeiting applications.

Anisotropic Plasmonic Gold Nanorod-Indocyanine Green@Reduced Graphene Oxide-Doxorubicin Nanohybrids for Image-Guided Enhanced Tumor Theranostics

The unique physicochemical and localized surface plasmon resonance assets of gold nanorods (GNRs) have offered combined cancer treatments with real-time diagnosis by integrating diverse theragnostic modalities into a single nanoplatform. In this work, a unique multifunctional nanohybrid material based on GNRs was designed for in vitro and in vivo tumor imaging along with synergistic and combinatorial therapy of tumor. The hybrid material with size less than 100 nm was achieved by embedding indocyanine green (ICG) on mesoporous silica-coated GNRs with further wrapping of reduced graphene oxide (rGO) and then attached with doxorubicin (DOX) and polyethylene glycol. The nanohybrid unveiled noteworthy stability and competently protected the embedded ICG from further aggregation, photobleaching, and nucleophilic attack by encapsulation of GNRs-ICG with rGO. Such combination of GNRs-ICG with rGO and DOX served as a real-time near-infrared (NIR) contrast imaging agent for cancer diagnosis. The hybrid material exhibits high NIR absorption property along with three destined capabilities, such as, nanozymatic activity, photothermal activity, and an excellent drug carrier for drug delivery. The integrated properties of the nanohybrid were then utilized for the triple mode of combined therapeutics of tumor cells, through synergistic catalytic therapy and chemotherapy with combinatorial photothermal therapy to achieve the maximum cancer killing efficiency. It is assumed that the assimilated multimodal imaging and therapeutic capability in single nanoparticle platform is advantageous for future practical applications in cancer diagnosis, therapy, and molecular imaging.

Progress and perspectives in single-molecule optical spectroscopy

We review some of the progress of single-molecule optical experiments in the past 20 years and propose some perspectives for the coming years. We particularly focus on methodological advances in fluorescence, super-resolution, photothermal contrast, and interferometric scattering and briefly discuss a few of the applications. These advances have enabled the exploration of new emitters and quantum optics; the chemistry and biology of complex heterogeneous systems, nanoparticles, and plasmonics; and the detection and study of non-fluorescing and non-absorbing nano-objects. We conclude by proposing some ideas for future experiments. The field will move toward more and better signals of a broader variety of objects and toward a sharper view of the surprising complexity of the nanoscale world of single (bio-)molecules, nanoparticles, and their nano-environments.

MEMS cantilever-controlled plasmonic colors for sustainable optical displays

Conventional optical displays using indium tin oxide and liquid crystal materials present challenges for long-term sustainability. We show here a cost-effective and complementary metal-oxide semiconductor (CMOS)-compatible fast and full-range electrically controlled RGB color display. This is achieved by combining transmission-based plasmonic metasurfaces with MEMS (microelectromechanical systems) technology, using only two common materials: aluminum and silicon oxide. White light is filtered into RGB components by plasmonic metasurfaces made of aluminum nanohole arrays. The transmission through each color filter is modulated by MEMS miniaturized cantilevers fabricated with aluminum and silicon oxide on top of the color filters. We show that the relative transmission of a color subpixel can be freely modulated from 35 to 100%. The pixels can also operate well above 800 Hz for future ultrafast displays. Our work provides a road to future circular economic goals by exploiting advances in structural colors and MEMS technologies to innovate optical displays.

Surface-Plasmon-Assisted Growth, Reshaping and Transformation of Nanomaterials

Excitation of surface plasmon resonance of metal nanostructures is a promising way to break the limit of optical diffraction and to achieve a great enhancement of the local electromagnetic field by the confinement of optical field at the nanoscale. Meanwhile, the relaxation of collective oscillation of electrons will promote the generation of hot carrier and localized thermal effects. The enhanced electromagnetic field, hot carriers and localized thermal effects play an important role in spectral enhancement, biomedicine and catalysis of chemical reactions. In this review, we focus on surface-plasmon-assisted nanomaterial reshaping, growth and transformation. Firstly, the mechanisms of surface-plasmon-modulated chemical reactions are discussed. This is followed by a discussion of recent advances on plasmon-assisted self-reshaping, growth and etching of plasmonic nanostructures. Then, we discuss plasmon-assisted growth/deposition of non-plasmonic nanostructures and transformation of luminescent nanocrystal. Finally, we present our views on the current status and perspectives on the future of the field. We believe that this review will promote the development of surface plasmon in the regulation of nanomaterials.

Double Lock Label Based on Thermosensitive Polymer Hydrogels for Information Camouflage and Multilevel Encryption

Developing extra safety encryption technologies to prevent information leakage and combat fakes is in high demand but is challenging. Herein, we propose a "double lock" strategy based on both lower critical solution temperature (LCST) and upper critical solution temperature (UCST) polymer hydrogels for information camouflage and multilevel encryption. Two types of hydrogels were synthesized by the method of random copolymerization. The number of -CO-NH₂ groups in the network structure of the hydrogels changed the enthalpic or entropic thermo-responsive hydrogels, and ultimately precisely controlled their phase transition temperature. The crosslink density of the polymer hydrogels governs the diffusion kinetics, resulting in a difference in the time for their color change. The combination of multiple LCST and UCST hydrogels in one label realized information encryption and dynamic information identification in the dimensions of both time and temperature. This work is highly interesting for the fields of information encryption, anti-counterfeiting, and smart responsive materials.

Second Harmonic Optical Circular Dichroism of Plasmonic Chiral Helicoid-III Nanoparticles

While plasmonic particles can provide optical resonances in a wide spectral range from the lower visible up to the near-infrared, often, symmetry effects are utilized to obtain particular optical responses. By breaking certain spatial symmetries, chiral structures arise and provide robust chiroptical responses to these plasmonic resonances. Here, we observe strong chiroptical responses in the linear and nonlinear optical regime for chiral L-handed helicoid-III nanoparticles and quantify them by means of an asymmetric factor, the so-called g-factor. We calculate the linear optical g-factors for two distinct chiroptical resonances to -0.12 and -0.43 and the nonlinear optical g-factors to -1.45 and -1.63. The results demonstrate that the chirality of the helicoid-III nanoparticles is strongly enhanced in the nonlinear regime.