Disorder in convergent floral nanostructures enhances signalling to bees

Hibiscus bullseyes reveal mechanisms controlling petal pattern proportions that influence plant-pollinator interactions

Colorful flower patterns are key signals to attract pollinators. To produce such motifs, plants specify boundaries dividing petals into subdomains where cells develop distinctive pigmentations, shapes, and textures. While some transcription factors and biosynthetic pathways behind these characteristics are well studied, the upstream processes restricting their activities to specific petal regions remain enigmatic. Here, we unveil that the petal surface of Hibiscus trionum, an emerging model featuring a bullseye on its corolla, is prepatterned as the bullseye boundary position is specified long before it becomes visible. Using a computational model, we explore how pattern proportions are maintained while petals experience a 100-fold size increase. Exploiting transgenic lines and natural variants, we show that plants can regulate boundary position during the prepatterning phase or modulate growth on either side of this boundary later in development to vary bullseye proportions. Such modifications are functionally relevant, as buff-tailed bumblebees can reliably identify food sources based on bullseye size and prefer certain pattern proportions.

Chlorophyllase (PsCLH1) and light-harvesting chlorophyll a/b binding protein 1 (PsLhcb1) and PsLhcb5 maintain petal greenness in Paeonia suffruticosa 'Lv Mu Yin Yu'

INTRODUCTION

Green flowers are not an adaptive trait in natural plants due to the challenge for pollinators to discriminate from leaves, but they are valuable in horticulture. The molecular mechanisms of green petals remain unclear. Tree peony (Paeonia suffruticosa) is a globally cultivated ornamental plant and considered the 'King of Flowers' in China. The P. suffruticosa 'Lv Mu Yin Yu (LMYY)' cultivar with green petals could be utilized as a representative model for understanding petal-specific chlorophyll (Chl) accumulation and color formation.

OBJECTIVES

Identify the key genes related to Chl metabolism and understand the molecular mechanism of petal color changes.

METHODS

The petal color parameter was analyzed at five developmental stages using a Chroma Spectrophotometer, and Chl and anthocyanin accumulation patterns were examined. Based on comparative transcriptomes, differentially expressed genes (DEGs) were identified, among which three were functionally characterized through overexpression in tobacco plants or silencing in 'LMYY' petals.

RESULTS

During flower development and blooming, flower color changed from green to pale pink, consistent with the Chl and anthocyanin levels. The level of Chl demonstrated a similar pattern with petal epidermal cell striation density. The DEGs responsible for Chl and anthocyanin metabolism were characterized through a comparative transcriptome analysis of flower petals over three critical developmental stages. The key chlorophyllase (PsCLH1) and light-harvesting chlorophyll a/b binding protein 1 (PsLhcb1) and PsLhcb5 influenced the Chl accumulation and the greenness of 'LMYY' petals.

CONCLUSION

PsCLH1, PsLhcb1, and PsLhcb5 were critical in accumulating the Chl and maintaining the petal greenness. Flower color changes from green to pale pink were regulated by the homeostasis of Chl degradation and anthocyanin biosynthesis. This study offers insights into underlying molecular mechanisms in the green petal and a strategy for germplasm innovation.

Structural color in the bacterial domain: The ecogenomics of a 2-dimensional optical phenotype

Structural color is an optical phenomenon resulting from light interacting with nanostructured materials. Although structural color (SC) is widespread in the tree of life, the underlying genetics and genomics are not well understood. Here, we collected and sequenced a set of 87 structurally colored bacterial isolates and 30 related strains lacking SC. Optical analysis of colonies indicated that diverse bacteria from at least two different phyla (Bacteroidetes and Proteobacteria) can create two-dimensional packing of cells capable of producing SC. A pan-genome-wide association approach was used to identify genes associated with SC. The biosynthesis of uroporphyrin and pterins, as well as carbohydrate utilization and metabolism, was found to be involved. Using this information, we constructed a classifier to predict SC directly from bacterial genome sequences and validated it by cultivating and scoring 100 strains that were not part of the training set. We predicted that SCr is widely distributed within gram-negative bacteria. Analysis of over 13,000 assembled metagenomes suggested that SC is nearly absent from most habitats associated with multicellular organisms except macroalgae and is abundant in marine waters and surface/air interfaces. This work provides a large-scale ecogenomics view of SC in bacteria and identifies microbial pathways and evolutionary relationships that underlie this optical phenomenon.

'Organ'ising Floral Organ Development

Flowers are plant structures characteristic of the phylum Angiosperms composed of organs thought to have emerged from homologous structures to leaves in order to specialize in a distinctive function: reproduction. Symmetric shapes, colours, and scents all play important functional roles in flower biology. The evolution of flower symmetry and the morphology of individual flower parts (sepals, petals, stamens, and carpels) has significantly contributed to the diversity of reproductive strategies across flowering plant species. This diversity facilitates attractiveness for pollination, protection of gametes, efficient fertilization, and seed production. Symmetry, the establishment of body axes, and fate determination are tightly linked. The complex genetic networks underlying the establishment of organ, tissue, and cellular identity, as well as the growth regulators acting across the body axes, are steadily being elucidated in the field. In this review, we summarise the wealth of research already at our fingertips to begin weaving together how separate processes involved in specifying organ identity within the flower may interact, providing a functional perspective on how identity determination and axial regulation may be coordinated to inform symmetrical floral organ structures.

Living jewels: iterative evolution of iridescent blue leaves from helicoidal cell walls

BACKGROUND AND AIMS

Structural colour is responsible for the remarkable metallic blue colour seen in the leaves of several plants. Species belonging to only ten genera have been investigated to date, revealing four photonic structures responsible for structurally coloured leaves. One of these is the helicoidal cell wall, known to create structural colour in the leaf cells of five taxa. Here we investigate a broad selection of land plants to understand the phylogenetic distribution of this photonic structure in leaves.

METHODS

We identified helicoidal structures in the leaf epidermal cells of 19 species using transmission electron microscopy. Pitch measurements of the helicoids were compared with the reflectance spectra of circularly polarized light from the cells to confirm the structure-colour relationship.

RESULTS

By incorporating species examined with a polarizing filter, our results increase the number of taxa with photonic helicoidal cell walls to species belonging to at least 35 genera. These include 19 monocot genera, from the orders Asparagales (Orchidaceae) and Poales (Cyperaceae, Eriocaulaceae, Rapateaceae) and 16 fern genera, from the orders Marattiales (Marattiaceae), Schizaeales (Anemiaceae) and Polypodiales (Blechnaceae, Dryopteridaceae, Lomariopsidaceae, Polypodiaceae, Pteridaceae, Tectariaceae).

CONCLUSIONS

Our investigation adds considerably to the recorded diversity of plants with structurally coloured leaves. The iterative evolution of photonic helicoidal walls has resulted in a broad phylogenetic distribution, centred on ferns and monocots. We speculate that the primary function of the helicoidal wall is to provide strength and support, so structural colour could have evolved as a potentially beneficial chance function of this structure.

Functional traits of fossil plants

A minuscule fraction of the Earth's paleobiological diversity is preserved in the geological record as fossils. What plant remnants have withstood taphonomic filtering, fragmentation, and alteration in their journey to become part of the fossil record provide unique information on how plants functioned in paleo-ecosystems through their traits. Plant traits are measurable morphological, anatomical, physiological, biochemical, or phenological characteristics that potentially affect their environment and fitness. Here, we review the rich literature of paleobotany, through the lens of contemporary trait-based ecology, to evaluate which well-established extant plant traits hold the greatest promise for application to fossils. In particular, we focus on fossil plant functional traits, those measurable properties of leaf, stem, reproductive, or whole plant fossils that offer insights into the functioning of the plant when alive. The limitations of a trait-based approach in paleobotany are considerable. However, in our critical assessment of over 30 extant traits we present an initial, semi-quantitative ranking of 26 paleo-functional traits based on taphonomic and methodological criteria on the potential of those traits to impact Earth system processes, and for that impact to be quantifiable. We demonstrate how valuable inferences on paleo-ecosystem processes (pollination biology, herbivory), past nutrient cycles, paleobiogeography, paleo-demography (life history), and Earth system history can be derived through the application of paleo-functional traits to fossil plants.

Centrifuge fractionation during purification of cellulose nanocrystals after acid hydrolysis and consequences on their chiral self-assembly

The inherent colloidal dispersity (due to length, aspect ratio, surface charge heterogeneity) of CNCs, when produced using the typical traditional sulfuric acid hydrolysis route, presents a great challenge when interpreting colloidal properties and linking the CNC film nanostructure to the helicoidal self-assembly mechanism during drying. Indeed, further improvement of this CNC preparation route is required to yield films with better control over the CNC pitch and optical properties. Here we present a modified CNC-preparation protocol, by fractionating and harvesting CNCs with different average surface charges, rod lengths, aspect ratios, already during the centrifugation steps after hydrolysis. This enables faster CNC fractionation, because it is performed in a high ionic strength aqueous medium. By comparing dry films from the three CNC fractions, discrepancies in the CNC self-assembly and structural colors were clearly observed. Conclusively, we demonstrate a fast protocol to harvest different populations of CNCs, that enable tailored refinement of structural colors in CNC films.

Anti-Environmental Aging Passive Daytime Radiative Cooling

Passive daytime radiative cooling technology presents a sustainable solution for combating global warming and accompanying extreme weather, with great potential for diverse applications. The key characteristics of this cooling technology are the ability to reflect most sunlight and radiate heat through the atmospheric transparency window. However, the required high solar reflectance is easily affected by environmental aging, rendering the cooling ineffective. In recent years, significant advancements have been made in understanding the failure mechanisms, design strategies, and manufacturing technologies of daytime radiative cooling. Herein, a critical review on anti-environmental aging passive daytime radiative cooling with the goal of advancing their commercial applications is presented. It is first introduced the optical mechanisms and optimization principles of radiative cooling, which serve as a basis for further endowing environmental durability. Then the environmental aging conditions of passive daytime radiative cooling, mainly focusing on UV exposure, thermal aging, surface contamination and chemical corrosion are discussed. Furthermore, the developments of anti-environmental aging passive daytime radiative cooling materials, including design strategies, fabrication techniques, structures, and performances, are reviewed and classified for the first time. Last but not the least, the remaining open challenges and the insights are presented for the further promotion of the commercialization progress.

Thin film structural color is widespread in slime molds (Myxomycetes, Amoebozoa)

Brilliant colors in nature arise from the interference of light with periodic nanostructures resulting in structural color. While such biological photonic structures have long attracted interest in insects and plants, they are little known in other groups of organisms. Unexpected in the kingdom of Amoebozoa, which assembles unicellular organisms, structural colors were observed in myxomycetes, an evolutionary group of amoebae forming macroscopic, fungal-like structures. Previous work related the sparkling appearance of Diachea leucopodia to thin film interference. Using optical and ultrastructural characterization, we here investigated the occurrence of structural color across 22 species representing two major evolutionary clades of myxomycetes including 14 genera. All investigated species showed thin film interference at the peridium, producing colors with hues distributed throughout the visible range that were altered by pigmentary absorption. A white reflective layer of densely packed calcium-rich shells is observed in a compound peridium in Metatrichia vesparium, whose formation and function are still unknown. These results raise interesting questions on the biological relevance of thin film structural colors in myxomycetes, suggesting they may be a by-product of their reproductive cycle.

Self-assembled, disordered structural color from fruit wax bloom

Many visually guided frugivores have eyes highly adapted for blue sensitivity, which makes it perhaps surprising that blue pigmented fruits are not more common. However, some fruits are blue even though they do not contain blue pigments. We investigate dark pigmented fruits with wax blooms, like blueberries, plums, and juniper cones, and find that a structural color mechanism is responsible for their appearance. The chromatic blue-ultraviolet reflectance arises from the interaction of the randomly arranged nonspherical scatterers with light. We reproduce the structural color in the laboratory by recrystallizing wax bloom, allowing it to self-assemble to produce the blue appearance. We demonstrate that blue fruits and structurally colored fruits are not constrained to those with blue subcuticular structure or pigment. Further, convergent optical properties appear across a wide phylogenetic range despite diverse morphologies. Epicuticular waxes are elements of the future bioengineering toolbox as sustainable and biocompatible, self-assembling, self-cleaning, and self-repairing optical biomaterials.

Strawberry varieties differ in pollinator-relevant floral traits

A rising global population will need more food, increasing demand for insect pollination services. However, general insect declines conflict with this demand. One way to mitigate this conflict is to grow crop flowers that are easier for insects to find and more rewarding to those that visit them. This study quantifies variation in the pollinator-relevant traits of nectar and pollen production, flower size and flower shape in commercial strawberry, finding significant variation between varieties in all traits. Bumblebees could learn to distinguish between the extremes of variation in flower shape, but this learning is very slow, indicating that this variation is at the limit of that which can be detected by bumblebees. Bee preferences for nectar of differing sugar concentrations at field-realistic volumes were consistent with previous observations at larger volumes, suggesting that it is valid to translate lab findings to the field. This study builds on our knowledge of the range of pollinator reward present in a single cultivated species and of the impact of field-realistic levels of variation in floral traits on bumblebee preferences.

P-MIRU, a Polarized Multispectral Imaging System, Reveals Reflection Information on the Biological Surface

Reflection light forms the core of our visual perception of the world. We can obtain vast information by examining reflection light from biological surfaces, including pigment composition and distribution, tissue structure and surface microstructure. However, because of the limitations in our visual system, the complete information in reflection light, which we term 'reflectome', cannot be fully exploited. For example, we may miss reflection light information outside our visible wavelengths. In addition, unlike insects, we have virtually no sensitivity to light polarization. We can detect non-chromatic information lurking in reflection light only with appropriate devices. Although previous studies have designed and developed systems for specialized uses supporting our visual systems, we still do not have a versatile, rapid, convenient and affordable system for analyzing broad aspects of reflection from biological surfaces. To overcome this situation, we developed P-MIRU, a novel multispectral and polarization imaging system for reflecting light from biological surfaces. The hardware and software of P-MIRU are open source and customizable and thus can be applied for virtually any research on biological surfaces. Furthermore, P-MIRU is a user-friendly system for biologists with no specialized programming or engineering knowledge. P-MIRU successfully visualized multispectral reflection in visible/non-visible wavelengths and simultaneously detected various surface phenotypes of spectral polarization. The P-MIRU system extends our visual ability and unveils information on biological surfaces.

Bumblebee responses to variation in pollinator-attracting traits of Vicia faba flowers

Adaptations that attract pollinators to flowers are central to the reproductive success of insect-pollinated plants, including crops. Understanding the influence of these non-rewarding traits on pollinator preference is important for our future food security by maintaining sufficient crop pollination. We have identified substantial variation in flower shape, petal size, corolla-tube length, petal spot size and floral volatile compounds among a panel of 30 genetically distinct lines of Vicia faba. Using this variation, we found that Bombus terrestris was able to distinguish between natural variation in petal spot size, floral volatile emissions and corolla-tube length. Foragers showed some innate preference for spotted flowers over non-spotted flowers and preferred shorter corolla-tube lengths over longer tubes. Our results suggest that some floral traits may have significant potential to enhance pollinator attraction to V. faba crops, particularly if paired with optimised rewards.

Genome and transcriptome analyses reveal genes involved in the formation of fine ridges on petal epidermal cells in Hibiscus trionum

Hibiscus trionum, commonly known as the 'Flower of an Hour', is an easily cultivated plant in the Malvaceae family that is widespread in tropical and temperate regions, including drylands. The purple base part of its petal exhibits structural colour due to the fine ridges on the epidermal cell surface, and the molecular mechanism of ridge formation has been actively investigated. We performed genome sequencing of H. trionum using a long-read sequencing technology with transcriptome and pathway analyses to identify candidate genes for fine structure formation. The ortholog of AtSHINE1, which is involved in the biosynthesis of cuticular wax in Arabidopsis thaliana, was significantly overexpressed in the iridescent tissue. In addition, orthologs of AtCUS2 and AtCYP77A, which contribute to cutin synthesis, were also overexpressed. Our results provide important insights into the formation of fine ridges on epidermal cells in plants using H. trionum as a model.

Osmophores and petal surface traits in Bignonieae species

This study characterizes the osmophores and corolla traits in 18 species of Bignonieae Dumort., a Bignoniaceae tribe occurring in the Cerrado, a neotropical savanna in Brazil. To detect osmophore distribution, whole, newly opened flowers were immersed in Neutral Red Solution. Samples from the corolla tube and lobes were also fixed and analyzed micromorphologically, anatomically, and histochemically. The osmophores showed six markedly different distribution patterns that were not clearly associated with histological features. In most species, osmophores comprised papillose secretory epidermises and a few layers of subepidermal parenchyma. Starch grains, lipid droplets, and terpenes were detected in osmophores. An ornamented cuticle, cuticular folds, glandular and non-glandular trichomes, raised stomata and epicuticular wax granules are common traits in the species studied and may be useful in determining the taxonomy of the group. We found that 94% of the species visited by bees had papillose epidermises while the single hummingbird-pollinated species presented a flattened epidermis. Variations in osmophore pattern among species visited by bees, including variations within the same plant genus, are novel finding. Additionally, the Bignonieae species visited by bees presented a textured corolla surface, which has been reported as facilitating bee attachment and movement towards the floral resource. Future studies with a greater number of Bignonieae species and more detailed pollinator behavioral assays may help in the interpretation of the variations in corolla traits and functional relationships between flowers and pollinators.

Bio-inspired optical structures for enhancing luminescence

Luminescence is an essential signal for many plants, insects, and marine organisms to attract the opposite sex, avoid predators, and so on. Most luminescent living organisms have ingenious optical structures which can help them get high luminescent performances. These remarkable and efficient structures have been formed by natural selection from long-time evolution. Researchers keenly observed the enhanced luminescence phenomena and studied how these phenomena happen in order to learn the characteristics of bio-photonics. In this review, we summarize the optical structures for enhancing luminescence and their applications. The structures are classified according to their different functions. We focus on how researchers use these biological inspirations to enhance different luminescence processes, such as chemiluminescence (CL), photoluminescence (PL), and electroluminescence (EL). It lays a foundation for further research on the applications of luminescence enhancement. Furthermore, we give examples of luminescence enhancement by bio-inspired structures in information encryption, biochemical detection, and light sources. These examples show that it is possible to use bio-inspired optical structures to solve complex problems in optical applications. Our work will provide guidance for research on biomimetic optics, micro- and nano-optical structures, and enhanced luminescence.

Multifunctionality in Nature: Structure-Function Relationships in Biological Materials

Modern material design aims to achieve multifunctionality through integrating structures in a diverse range, resulting in simple materials with embedded functions. Biological materials and organisms are typical examples of this concept, where complex functionalities are achieved through a limited material base. This review highlights the multiscale structural and functional integration of representative natural organisms and materials, as well as biomimetic examples. The impact, wear, and crush resistance properties exhibited by mantis shrimp and ironclad beetle during predation or resistance offer valuable inspiration for the development of structural materials in the aerospace field. Investigating cyanobacteria that thrive in extreme environments can contribute to developing living materials that can serve in places like Mars. The exploration of shape memory and the self-repairing properties of spider silk and mussels, as well as the investigation of sensing-actuating and sensing-camouflage mechanisms in Banksias, chameleons, and moths, holds significant potential for the optimization of soft robot designs. Furthermore, a deeper understanding of mussel and gecko adhesion mechanisms can have a profound impact on medical fields, including tissue engineering and drug delivery. In conclusion, the integration of structure and function is crucial for driving innovations and breakthroughs in modern engineering materials and their applications. The gaps between current biomimetic designs and natural organisms are also discussed.

Wrinkle nanostructures generate a novel form of blue structural color in great argus flight feathers

Currently known structural colors in feathers are caused by light scattering from periodic or amorphous arrangements of keratin, melanin, and air within barbs and barbules that comprise the feather vane. Structural coloration in the largest part of the feather, the central rachis, is rare. Here, we report on an investigation of the physical mechanisms underlying the only known case of structural coloration in the rachis, the blue rachis of great argus (Argusianus argus) flight feathers. Spectrophotometry revealed a reflectance peak at 344 nm that is diffuse and well matched to the blue and UV-sensitive cone sensitivities of this species' visual system. A combination of electron microscopy and optical modeling confirmed blue coloration is generated by scattering from amorphous wrinkle nanostructures 125 nm deep and 385 nm apart, a new avian coloration mechanism. These findings have implications for understanding how novel courtship phenotypes arise through evolutionary modification of existing ontogenetic templates.

Multiple origins of lipid-based structural colors contribute to a gradient of fruit colors in Viburnum (Adoxaceae)

Structural color is poorly known in plants relative to animals. In fruits, only a handful of cases have been described, including in Viburnum tinus where the blue color results from a disordered multilayered reflector made of lipid droplets. Here, we examine the broader evolutionary context of fruit structural color across the genus Viburnum. We obtained fresh and herbarium fruit material from 30 Viburnum species spanning the phylogeny and used transmission electron microscopy, optical simulations, and ancestral state reconstruction to identify the presence/absence of photonic structures in each species, understand the mechanism producing structural color in newly identified species, relate the development of cell wall structure to reflectance in Viburnum dentatum, and describe the evolution of cell wall architecture across Viburnum. We identify at least two (possibly three) origins of blue fruit color in Viburnum in species which produce large photonic structures made of lipid droplets embedded in the cell wall and which reflect blue light. Examining the full spectrum of mechanisms producing color in pl, including structural color as well as pigments, will yield further insights into the diversity, ecology, and evolution of fruit color.

Ecology: Using CRISPR to switch pollinators

A single CRISPR-generated mutation in a MYB transcription factor in Petunia leads to a dual phenotype. This in turn has a dual effect on potential pollinating insects, deterring the original pollinator while increasing the visitation of a possible replacement.

Cuticle chemistry drives the development of diffraction gratings on the surface of Hibiscus trionum petals

Plants combine both chemical and structural means to appear colorful. We now have an extensive understanding of the metabolic pathways used by flowering plants to synthesize pigments, but the mechanisms remain obscure whereby cells produce microscopic structures sufficiently regular to interfere with light and create an optical effect. Here, we combine transgenic approaches in a novel model system, Hibiscus trionum, with chemical analyses of the cuticle, both in transgenic lines and in different species of Hibiscus, to investigate the formation of a semi-ordered diffraction grating on the petal surface. We show that regulating both cuticle production and epidermal cell growth is insufficient to determine the type of cuticular pattern produced. Instead, the chemical composition of the cuticle plays a crucial role in restricting the formation of diffraction gratings to the pigmented region of the petal. This suggests that buckling, driven by spatiotemporal regulation of cuticle chemistry, could pattern the petal surface at the nanoscale.

Eco-Evo-Devo of petal pigmentation patterning

Colourful spots, stripes and rings decorate the corolla of most flowering plants and fulfil important biotic and abiotic functions. Spatial differences in the pigmentation of epidermal cells can create these patterns. The last few years have yielded new data that have started to illuminate the mechanisms controlling the function, formation and evolution of petal patterns. These advances have broad impacts beyond the immediate field as pigmentation patterns are wonderful systems to explore multiscale biological problems: from understanding how cells make decisions at the microscale to examining the roots of biodiversity at the macroscale. These new results also reveal there is more to petal patterning than meets the eye, opening up a brand new area of investigation. In this mini-review, we summarise our current knowledge on the Eco-Evo-Devo of petal pigmentation patterns and discuss some of the most exciting yet unanswered questions that represent avenues for future research.

A generalized approach to characterize optical properties of natural objects

To understand the diversity of ways in which natural materials interact with light, it is important to consider how their reflectance changes with the angle of illumination or viewing and to consider wavelengths beyond the visible. Efforts to characterize these optical properties, however, have been hampered by heterogeneity in measurement techniques, parameters and terminology. Here, we propose a standardized set of measurements, parameters and terminology to describe the optical properties of natural objects based on spectrometry, including angle-dependent effects, such as iridescence and specularity. We select a set of existing measurements and parameters that are generalizable to any wavelength range and spectral shape, and we highlight which subsets of measures are relevant to different biological questions. As a case study, we have applied these measures to 30 species of Christmas beetles, in which we observed previously unrealized diversity in visible and near-infrared reflectance. As expected, reflection of short wavelengths was associated with high spectral purity and angle dependence. In contrast to simple, artificial structures, iridescence and specularity were not strongly correlated, highlighting the complexity and modularity of natural materials. Species did not cluster according to spectral parameters or genus, suggesting high lability of optical properties. The proposed standardization of measures and parameters will improve our understanding of biological adaptations for manipulating light by facilitating the systematic comparison of complex optical properties, such as glossy or metallic appearances and visible or near-infrared iridescence.

Floral nectaries and pseudonectaries in Eranthis (Ranunculaceae): petal development, micromorphology, structure and ultrastructure

Flowers are an innovative characteristic of angiosperms, and elaborate petals usually have highly specialized structures to adapt to different living environments and pollinators. Petals of Eranthis have complex bilabiate structures with nectaries and pseudonectaries; however, the diversity of the petal micromorphology and structure is unknown. Petal development, micromorphology, structure and ultrastructure in four Eranthis species were investigated under SEM, TEM and LM. The results show that petals undergo 5 developmental stages, and accessory structure formation (stage 4) mainly determines the diversity of final mature petal morphology and pseudonectaries; the central depression formed in stage 2 will develop into nectary tissues. Petals are bilabiate and have hidden nectaries in nectary grooves; they consist of one layer of rounded and raised secretory epidermal cells and 3-14 layers of secretory cells with abundant plasmodesmata between cells. A large number of sieve tubes are distributed between the cells and extend to the epidermis; in addition, the vessel elements are located below the secretory area. Nectar is stored in the intercellular space between secretory parenchyma cells and escapes through microchannels or cell rupture. Pseudonectaries in all species of Eranthis except for E. hyemalis consist of smooth, ornamented epidermal cells and 9-12 layers of parenchyma cells with sparse cytoplasm, which may have the function of attracting pollinators.

Convergent evolution of disordered lipidic structural colour in the fruits of Lantana strigocamara (syn. L. camara hybrid cultivar)

The majority of plant colours are produced by anthocyanin and carotenoid pigments, but colouration obtained by nanostructured materials (i.e. structural colours) is increasingly reported in plants. Here, we identify a multilayer photonic structure in the fruits of Lantana strigocamara and compare it with a similar structure in Viburnum tinus fruits. We used a combination of transmission electron microscopy (EM), serial EM tomography, scanning force microscopy and optical simulations to characterise the photonic structure in L. strigocamara. We also examine the development of the structure during maturation. We found that the structural colour derives from a disordered, multilayered reflector consisting of lipid droplets of c.105 nm that form a plate-like structure in 3D. This structure begins to form early in development and reflects blue wavelengths of light with increasing intensity over time as the structure develops. The materials used are likely to be lipid polymers. Lantana strigocamara is the second origin of a lipid-based photonic structure, convergently evolved with the structure in Viburnum tinus. Chemical differences between the lipids in L. strigocamara and those of V. tinus suggest a distinct evolutionary trajectory with implications for the signalling function of structural colours in fruits.

Biomimetic macroscopic hierarchical moire gratings

Large-scale hierarchical macroscopic moire gratings resembling the surface structure of Peruvian lily flower petals are fabricated on azobenzene molecular glass thin films using a Lloyd's mirror interferometer. It is shown that nanostructured linear and crossed moire gratings can be made with pitch values reaching a few millimeters. Also, using atomic force microscopy, scanning electron microscopy, optical microscopy, and surface profilometry techniques, it is shown that the obtained moire gratings have two-fold or three-fold hierarchical structures fabricated using a simple all optical technique.

Groovy and Gnarly: Surface Wrinkles as a Multifunctional Motif for Terrestrial and Marine Environments

From large ventral pleats of humpback whales to nanoscale ridges on flower petals, wrinkled structures are omnipresent, multifunctional, and found at hugely diverse scales. Depending on the particulars of the biological system-its environment, morphology, and mechanical properties-wrinkles may control adhesion, friction, wetting, or drag; promote interfacial exchange; act as flow channels; or contribute to stretching, mechanical integrity, or structural color. Undulations on natural surfaces primarily arise from stress-induced instabilities of surface layers (e.g., buckling) during growth or aging. Variation in the material properties of surface layers and in the magnitude and orientation of intrinsic stresses during growth lead to a variety of wrinkling morphologies and patterns which, in turn, reflect the wide range of biophysical challenges wrinkled surfaces can solve. Therefore, investigating how surface wrinkles vary and are implemented across biological systems is key to understanding their structure-function relationships. In this work, we synthesize the literature in a metadata analysis of surface wrinkling in various terrestrial and marine organisms to review important morphological parameters and classify functional aspects of surface wrinkles in relation to the size and ecology of organisms. Building on our previous and current experimental studies, we explore case studies on nano/micro-scale wrinkles in biofilms, plant surfaces, and basking shark filter structures to compare developmental and structure-vs-function aspects of wrinkles with vastly different size scales and environmental demands. In doing this and by contrasting wrinkle development in soft and hard biological systems, we provide a template of structure-function relationships of biological surface wrinkles and an outlook for functionalized wrinkled biomimetic surfaces.

Petal development and elaboration

Petals can be simple or elaborate, depending on whether they have complex basic structures and/or highly specialized epidermal modifications. It has been proposed that the independent origin and diversification of elaborate petals have promoted plant-animal interactions and, therefore, the evolutionary radiation of corresponding plant groups. Recent advances in floral development and evolution have greatly improved our understanding of the processes, patterns, and mechanisms underlying petal elaboration. In this review, we compare the developmental processes of simple and elaborate petals, concluding that elaborate petals can be achieved through four main paths of modifications (i.e. marginal elaboration, ventral elaboration, dorsal elaboration, and surface elaboration). Although different types of elaborate petals were formed through different types of modifications, they are all results of changes in the expression patterns of genes involved in organ polarity establishment and/or the proliferation, expansion, and differentiation of cells. The deployment of existing genetic materials to perform a new function was also shown to be a key to making elaborate petals during evolution.

Beetle iridescence induces an avoidance response in naïve avian predators

It has recently been found that iridescence, a taxonomically widespread form of animal coloration defined by a change in hue with viewing angle, can act as a highly effective form of camouflage. However, little is known about whether iridescence can confer a survival benefit to prey postdetection and, if so, which optical properties of iridescent prey are important for this putative protective function. Here, we tested the effects of both iridescence and surface gloss (i.e. specular reflection) on the attack behaviour of prey-naïve avian predators. Using real and artificial jewel beetle, Sternocera aequisignata, wing cases, we found that iridescence provides initial protection against avian predation by significantly reducing the willingness to attack. Importantly, we found that the main factor explaining this aversion is iridescence, not multiple colours per se, with surface gloss also having an independent effect. Our results are important because they demonstrate that even when prey are presented up close and against a mismatching background, iridescence may confer a survival benefit by inducing hesitation or even, as sometimes observed, an aversion response in attacking birds. Furthermore, this means that even postdetection, prey do not necessarily need to have secondary defences such as sharp spines or toxins for iridescence to have a protective effect. Taken together, our results suggest that reduced avian predation could facilitate the initial evolution of iridescence in many species of insects and that it is the defining feature of iridescence, its colour changeability, that is important for this effect.

Replicating the Cynandra opis Butterfly's Structural Color for Bioinspired Bigrating Color Filters

Multilayer grating structures, such as those found on the wings of the butterfly Cynandra opis, are able to interact with light to generate structural coloration. When illuminated and viewed at defined angles, such structural color is characterized by exceptional purity and brightness. To provide further insight into the mechanism of structural coloration, two-photon laser lithography is used to fabricate bioinspired bigrating nanostructures, whose optical properties may be controlled by variation of the height and period of the grating features. Through the use of both spectral measurements and finite-element method simulations, herein specific feature dimensions are identified that due to the combined effects of multilayer interference and diffraction generate excellent spectral characteristics and high color purity over the entire visible range. Additionally, it is demonstrated that variation of feature period and/or height plays a central role in controlling both hue and purity. Importantly, such tuneable bigrating structures are of significant utility in color filtering applications.

Insect-inspired nanofibrous polyaniline multi-scale films for hybrid polarimetric imaging with scattered light

We demonstrate a bio-inspired coating for novel imaging and sensing designs: the coating sorts different colors and linear polarizations. This coating, composed of conducting, nanofibrous polyaniline in an inverse opal film (PANI-IOF), is inexpensive and can feasibly be deposited over large areas on a range of flexible and non-flat substrates. With PANI IOFs, light is scattered into azimuthally polarized Debye rings. Subsequently, the diffracted speckle patterns carry compressed representations of the polarized illumination, which we reconstruct using shallow neural networks.

Air temperature drives the evolution of mid-infrared optical properties of butterfly wings

This study uncovers a correlation between the mid-infrared emissivity of butterfly wings and the average air temperature of their habitats across the world. Butterflies from cooler climates have a lower mid-infrared emissivity, which limits heat losses to surroundings, and butterflies from warmer climates have a higher mid-infrared emissivity, which enhances radiative cooling. The mid-infrared emissivity showed no correlation with other investigated climatic factors. Phylogenetic independent contrasts analysis indicates the microstructures of butterfly wings may have evolved in part to regulate mid-infrared emissivity as an adaptation to climate, rather than as phylogenetic inertia. Our findings offer new insights into the role of microstructures in thermoregulation and suggest both evolutionary and physical constraints to butterflies' abilities to adapt to climate change.

Kassim NF, Zuharah WF, Hashim NA, Morales Vargas RE, Morales NP. Flower Mimics Roll Out Multicolored Carpets to Lure and Kill the House Fly

Flowers and their spatial clustering are important parameters that mediate the foraging behavior and visitation rate of pollinating insects. Visual stimuli are crucial for triggering behavioral changes in the house fly, Musca domestica, which regularly visits plants for feeding and reproduction. The success of bait technology, which is the principal means of combatting flies, is adversely affected by reduced attractiveness and ineffective application techniques. Despite evidence that house flies have color vision capacity, respond to flowers, and exhibit color and pattern preference, the potential of artificial flowers as attractive factors has not been explored. The present study was performed to investigate whether artificial floral designs can lure and kill house flies. Starved wild house flies were presented with equal opportunities to acquire sugar meals, to which boric acid had been added as a toxin, from one flower arrangement (blue-dominated design, BDD; yellow-dominated design, YDD; or pink-dominated design, PDD), and a non-toxic white design (WDD). We also allowed house flies to forage within an enclosure containing two non-toxic floral designs (WDDs). The differences in mortality between the two environments with and without toxicant were examined. The survival rate of Musca domestica was extremely high when WDDs containing non-toxic sugar sources were the only feeding sites available. When given an option to forage in an environment containing a BDD and a WDD, house flies showed a high mortality rate (76%) compared to their counterparts maintained in the WDD environment (2%). When kept in an enclosure containing one YDD and a WDD, flies showed a mortality rate of 88%; however, no mortality occurred among flies confined to a compound with a WDD pair. When provided an even chance of foraging in an enclosure containing a mixed pair of floral arrangements (PDD and WDD) and another with two WDDs, flies showed a higher mortality rate (78%) in the first environment. However, the maximum survival rate (100%) was seen in the WDD environment. Exposure to YDD tended to result in a greater mortality rate than with the two other floral designs. Mortality gradually increased with time among flies exposed to tested artificial floral designs. The results presented here clearly indicated that artificial flower arrangements with a toxic sugar reward were strikingly attractive for house flies when their preferred color (white) was present. These observations offer novel possibilities for future development of flower mimic-based house fly control.

Sculpting the surface: Structural patterning of plant epidermis

Plant epidermis are multifunctional surfaces that directly affect how plants interact with animals or microorganisms and influence their ability to harvest or protect from abiotic factors. To do this, plants rely on minuscule structures that confer remarkable properties to their outer layer. These microscopic features emerge from the hierarchical organization of epidermal cells with various shapes and dimensions combined with different elaborations of the cuticle, a protective film that covers plant surfaces. Understanding the properties and functions of those tridimensional elements as well as disentangling the mechanisms that control their formation and spatial distribution warrant a multidisciplinary approach. Here we show how interdisciplinary efforts of coupling modern tools of experimental biology, physics, and chemistry with advanced computational modeling and state-of-the art microscopy are yielding broad new insights into the seemingly arcane patterning processes that sculpt the outer layer of plants.

Finite-difference Time-domain (FDTD) Optical Simulations: A Primer for the Life Sciences and Bio-Inspired Engineering

Light influences most ecosystems on earth, from sun-dappled forests to bioluminescent creatures in the ocean deep. Biologists have long studied nano- and micro-scale organismal adaptations to manipulate light using ever-more sophisticated microscopy, spectroscopy, and other analytical equipment. In combination with experimental tools, simulations of light interacting with objects can help researchers determine the impact of observed structures and explore how variations affect optical function. In particular, the finite-difference time-domain (FDTD) method is widely used throughout the nanophotonics community to efficiently simulate light interacting with a variety of materials and optical devices. More recently, FDTD has been used to characterize optical adaptations in nature, such as camouflage in fish and other organisms, colors in sexually-selected birds and spiders, and photosynthetic efficiency in plants. FDTD is also common in bioengineering, as the design of biologically-inspired engineered structures can be guided and optimized through FDTD simulations. Parameter sweeps are a particularly useful application of FDTD, which allows researchers to explore a range of variables and modifications in natural and synthetic systems (e.g., to investigate the optical effects of changing the sizes, shape, or refractive indices of a structure). Here, we review the use of FDTD simulations in biology and present a brief methods primer tailored for life scientists, with a focus on the commercially available software Lumerical FDTD. We give special attention to whether FDTD is the right tool to use, how experimental techniques are used to acquire and import the structures of interest, and how their optical properties such as refractive index and absorption are obtained. This primer is intended to help researchers understand FDTD, implement the method to model optical effects, and learn about the benefits and limitations of this tool. Altogether, FDTD is well-suited to (i) characterize optical adaptations and (ii) provide mechanistic explanations; by doing so, it helps (iii) make conclusions about evolutionary theory and (iv) inspire new technologies based on natural structures.

Mechanical buckling can pattern the light-diffracting cuticle of Hibiscus trionum

Many species have cuticular striations that play a range of roles, from pollinator attraction to surface wettability. In Hibiscus trionum, the striations span multiple cells at the base of the petal to form a pattern that produces a type of iridescence. It is postulated, using theoretical models, that the pattern of striations could result from mechanical instabilities. By combining the application of mechanical stress with high-resolution imaging, we demonstrate that the cuticle buckles to create a striated pattern. Through mechanical modeling and cryo-SEM fractures, we show that the cuticle behaves like a bilayer system with a stiff film on a compliant substrate. The pattern of buckling aligns with the direction of the stress to create a larger-scale pattern. Our findings contribute to the understanding of the formation of tissue-wide patterns in living organisms.

Photoresponsive and Polarization-Sensitive Structural Colors from Cellulose/Liquid Crystal Nanophotonic Structures

Cellulose nanocrystals (CNCs) possess the ability to form helical periodic structures that generate structural colors. Due to the helicity, such self-assembled cellulose structures preferentially reflect left-handed circularly polarized light of certain colors, while they remain transparent to right-handed circularly polarized light. This study shows that combination with a liquid crystal enables modulation of the optical response to obtain light reflection of both handedness but with reversed spectral profiles. As a result, the nanophotonic systems provide vibrant structural colors that are tunable via the incident light polarization. The results are attributed to the liquid crystal aligning on the CNC/glucose film, to form a birefringent layer that twists the incident light polarization before interaction with the chiral cellulose nanocomposite. Using a photoresponsive liquid crystal, this effect can further be turned off by exposure to UV light, which switches the nematic liquid crystal into a nonbirefringent isotropic phase. The study highlights the potential of hybrid cellulose systems to create self-assembled yet advanced photoresponsive and polarization-tunable nanophotonics.

Humans Share More Preferences for Floral Phenotypes With Pollinators Than With Pests

Studies on the selection of floral traits usually consider pollinators and sometimes herbivores. However, humans also exert selection on floral traits of ornamental plants. We compared the preferences of bumblebees (Bombus terrestris), thrips (Frankliniella occidentalis), and humans for flowers of snapdragon. From a cross of two species, Antirrhinum majus and Antirrhinum linkianum, we selected four Recombinant Inbred Lines (RILs). We characterised scent emission from whole flowers and stamens, pollen content and viability, trichome density, floral shape, size and colour of floral parts. We tested the preferences of bumblebees, thrips, and humans for whole flowers, floral scent bouquets, stamen scent, and individual scent compounds. Humans and bumblebees showed preferences for parental species, whereas thrips preferred RILs. Colour and floral scent, in combination with other floral traits, seem relevant phenotypes for all organisms. Remarkably, visual traits override scent cues for bumblebees, although, scent is an important trait when bumblebees cannot see the flowers, and methyl benzoate was identified as a key attractant for them. The evolutionary trajectory of flowers is the result of multiple floral traits interacting with different organisms with different habits and modes of interaction.

Functional morphology of plants - a key to biomimetic applications

Learning from living organisms has emerged from a mainly curiosity-driven examination, where helpful functions of biological structures have been copied, into systematic biomimetic approaches that transfer a targeted function and its underlying principles from the biological model to a technical product. Plant biomimetics is based on functional morphology, which combines the knowledge gained from the morphology, anatomy and mechanics of plants and makes a statement about their form-structure-function relationship. Since the functional morphology of plants has become key to biomimetic applications, we present its central role in deciphering the functional principles that can be applied to engineering solutions. We consider that the future of biomimetics will include bioinspired developments that will contribute to better sustainability than that achieved by conventional products.

Shaping the Color and Angular Appearance of Plasmonic Metasurfaces with Tailored Disorder

The optical properties of plasmonic nanoparticle ensembles are determined not only by the particle shape and size but also by the nanoantenna arrangement. To investigate the influence of the spatial ordering on the far-field optical properties of nanoparticle ensembles, we introduce a disorder model that encompasses both "frozen-phonon" and correlated disorder. We present experimental as well as computational approaches to gain a better understanding of the impact of disorder. A designated Fourier microscopy setup allows us to record the real- and Fourier-space images of plasmonic metasurfaces as either RGB images or fully wavelength-resolved data sets. Furthermore, by treating the nanoparticles as dipoles, we calculate the electric field based on dipole-dipole interaction, extract the far-field response, and convert it to RGB images. Our results reveal how the different disorder parameters shape the optical far field and thus define the optical appearance of a disordered metasurface and show that the relatively simple dipole approximation is able to reproduce the far-field behavior accurately. These insights can be used for engineering metasurfaces with tailored disorder to produce a desired bidirectional reflectance distribution function.

Microstructural design for mechanical-optical multifunctionality in the exoskeleton of the flower beetle Torynorrhina flammea

Biological systems have a remarkable capability of synthesizing multifunctional materials that are adapted for specific physiological and ecological needs. When exploring structure-function relationships related to multifunctionality in nature, it can be a challenging task to address performance synergies, trade-offs, and the relative importance of different functions in biological materials, which, in turn, can hinder our ability to successfully develop their synthetic bioinspired counterparts. Here, we investigate such relationships between the mechanical and optical properties in a multifunctional biological material found in the highly protective yet conspicuously colored exoskeleton of the flower beetle, Torynorrhina flammea Combining experimental, computational, and theoretical approaches, we demonstrate that a micropillar-reinforced photonic multilayer in the beetle's exoskeleton simultaneously enhances mechanical robustness and optical appearance, giving rise to optical damage tolerance. Compared with plain multilayer structures, stiffer vertical micropillars increase stiffness and elastic recovery, restrain the formation of shear bands, and enhance delamination resistance. The micropillars also scatter the reflected light at larger polar angles, enhancing the first optical diffraction order, which makes the reflected color visible from a wider range of viewing angles. The synergistic effect of the improved angular reflectivity and damage localization capability contributes to the optical damage tolerance. Our systematic structural analysis of T. flammea's different color polymorphs and parametric optical and mechanical modeling further suggest that the beetle's microarchitecture is optimized toward maximizing the first-order optical diffraction rather than its mechanical stiffness. These findings shed light on material-level design strategies utilized in biological systems for achieving multifunctionality and could thus inform bioinspired material innovations.

Floral UV Features of Plant Species From a Neotropical Savanna

Despite the wide interest in flower colours, only after the end of the nineteenth-century studies started to comprise floral UV reflection, which is invisible to humans but visible to the major groups of pollinators. Many flowers and inflorescences display colour patterns, an important signal for pollinators, promoted by the presence of at least two different colours within flowers or inflorescences, including colours in the UV waveband. For Neotropical savanna plant species, we characterised floral UV features using UV-photography and reflectance measurements. We tested (i) whether floral UV features were constrained by their shared ancestry, (ii) whether floral UV features were associated with pollinators, and (iii) whether floral UV features were associated with floral traits mediating these interactions, including floral resource, type of attraction unit and presence/absence of non-UV colour patterns. Of 80 plant species, ca. 70% were UV-patternless, most of them UV-absorbing. Approximately 30% presented one of three types of UV-patterns: bullseye, contrasting corolla markings oriented toward floral resources or contrasting reproductive structures, which were all considered as floral guides. Floral UV features were phylogenetically constrained and were associated with pollinators, floral resources and attraction unit, but not with non-UV colour patterns. UV-patternless flowers were associated with most of the pollination systems, while UV-patterned flowers were mainly associated with bee-pollination. UV-absorbing flowers comprised the only category with hawkmoth- and butterfly-pollinated flowers, and a high percentage of hummingbird-pollinated species. Nocturnal pollinated species were also commonly UV-absorbing, except for one UV-reflecting bat-pollinated species and one beetle-pollinated species with UV-reflecting stigmas. All types of floral UV features were associated with nectar; however, flowers with contrasting reproductive structures were mainly associated with pollen. There was an association between UV-absorbing species and the presence of inflorescences and intermediate attraction units. Our results evince that phylogenetic relatedness can constraint floral UV features' diversification, but combinations of evolutionary and ecological processes may be expected in this scenario.

Natural Blues: Structure Meets Function in Anthocyanins

Choices of blue food colourants are extremely limited, with only two options in the USA, synthetic blue no. 1 and no. 2, and a third available in Europe, patent blue V. The food industry is investing heavily in finding naturally derived replacements, with limited success to date. Here, we review the complex and multifold mechanisms whereby blue pigmentation by anthocyanins is achieved in nature. Our aim is to explain how structure determines the functionality of anthocyanin pigments, particularly their colour and their stability. Where possible, we describe the impact of progressive decorations on colour and stability, drawn from extensive but diverse physico-chemical studies. We also consider briefly how this understanding could be harnessed to develop blue food colourants on the basis of the understanding of how anthocyanins create blues in nature.

Don't be fooled: false flowers in Asteraceae

The sunflower or daisy family, Asteraceae, comprises of approximately 10% of all angiosperm species. Their inflorescences form dense flower-like structures, pseudanthia or false flowers that may combine hundreds of individual flowers into a single structure. Recent data suggest that pseudanthia are analogs of single flowers not only morphologically but also at developmental and genetic level, and cannot merely be considered as condensed inflorescences. The large meristem size provides an advantage to study basic principles of patterning as well as inflorescence diversity in this evolutionary successful family. This knowledge has also practical importance in the commercially important crops of the family.

Fragmentary Blue: Resolving the Rarity Paradox in Flower Colors

Blue is a favored color of many humans. While blue skies and oceans are a common visual experience, this color is less frequently observed in flowers. We first review how blue has been important in human culture, and thus how our perception of blue has likely influenced the way of scientifically evaluating signals produced in nature, including approaches as disparate as Goethe's Farbenlehre, Linneaus' plant taxonomy, and current studies of plant-pollinator networks. We discuss the fact that most animals, however, have different vision to humans; for example, bee pollinators have trichromatic vision based on UV-, Blue-, and Green-sensitive photoreceptors with innate preferences for predominantly short-wavelength reflecting colors, including what we perceive as blue. The subsequent evolution of blue flowers may be driven by increased competition for pollinators, both because of a harsher environment (as at high altitude) or from high diversity and density of flowering plants (as in nutrient-rich meadows). The adaptive value of blue flowers should also be reinforced by nutrient richness or other factors, abiotic and biotic, that may reduce extra costs of blue-pigments synthesis. We thus provide new perspectives emphasizing that, while humans view blue as a less frequently evolved color in nature, to understand signaling, it is essential to employ models of biologically relevant observers. By doing so, we conclude that short wavelength reflecting blue flowers are indeed frequent in nature when considering the color vision and preferences of bees.

The Paradox of Iridescent Signals

Signals reliably convey information to a receiver. To be reliable, differences between individuals in signal properties must be consistent and easily perceived and evaluated by receivers. Iridescent objects are often striking and vivid, but their appearance can change dramatically with viewing geometry and illumination. The changeable nature of iridescent surfaces creates a paradox: how can they be reliable signals? We contend that iridescent color patches can be reliable signals only if accompanied by specific adaptations to enhance reliability, such as structures and behaviors that limit perceived hue shift or enhance and control directionality. We highlight the challenges of studying iridescence and key considerations for the evaluation of its adaptive significance.

Quo vadis biophotonics? Wearing serendipity and slow science as a badge of pride, and embracing biology

This article is a reflection on the themes of the Faraday Discussion meeting on 'Biological and bio-inspired optics' held from 20 to 22 July 2020. It is a personal perspective on the nature of this field as a broad and interdisciplinary field that has led to a sound understanding of the material properties of biological nanostructured and optical materials. The article describes how the nature of the field and the themes of the conference are reflected in particular in work on the 3D bicontinuous biophotonic nanostructures known as single gyroids and in bicontinuous structures more broadly. Such single gyroid materials are found for example in the butterfly Thecla opisena, where the questions of biophotonic response, of bio-inspired optics, of the relationship between structure and function, and of the relationship between natural and synthetic realisations are closely interlinked. This multitude of facets of research on single gyroid structures reflects the beauty of the broader field of biophotonics, namely as a field that lives through embracing the serendipitous discovery of the biophotonic marvels that nature offers to us as seeds for in-depth analysis and understanding. The meandering nature of its discoveries, and the need to accept the slowness that comes from exploration of intellectually new or foreign territory, mean that the field shares some traits with biological evolution itself. Looking into the future, I consider that a closer engagement with living tissue and with the biological questions of function and formation, rather than with the materials science of biological materials, will help ensure the continuing great success of this field.

Optical costs and benefits of disorder in biological photonic crystals

Photonic structures in ordered, quasi-ordered or disordered forms have evolved across many different animal and plant systems. They can produce complex and often functional optical responses through coherent and incoherent scattering processes, often too, in combination with broadband or narrowband absorbing pigmentation. Interestingly, these systems appear highly tolerant of faults in their photonic structures, with imperfections in their structural order appearing not to impact, discernibly, the systems' optical signatures. The extent to which any such biological system deviates from presenting perfect structural order can dictate the optical properties of that system and, thereby, the optical properties that system delivers. However, the nature and extent of the optical costs and benefits of imperfect order in biological systems demands further elucidation. Here, we identify the extent to which biological photonic systems are tolerant of defects and imperfections. Certainly, it is clear that often significant inherent variations in the photonic structures of these systems, for instance a relatively broad distribution of lattice constants, can consistently produce what appear to be effective visual appearances and optical performances. In this article, we review previously investigated biological photonic systems that present ordered, quasi-ordered or disordered structures. We discuss the form and nature of the optical behaviour of these structures, focusing particularly on the associated optical costs and benefits surrounding the extent to which their structures deviate from what might be considered ideal systems. Then, through detailed analyses of some well-known 1D and 2D structurally coloured systems, we analyse one of the common manifestations of imperfect order, namely, the extent and nature of positional disorder in the systems' spatial distribution of layers and scattering centres. We use these findings to inform optical modelling that presents a quantitative and qualitative description of the optical costs and benefits of such positional disorder among ordered and quasi-ordered 1D and 2D photonic systems. As deviation from perfectly ordered structures invariably limits the performance of technology-oriented synthetic photonic processes, we suggest that the use of bio-inspired fault tolerance principles would add value to applied photonic technologies.