1
|
Han WB, Jang TM, Shin B, Naganaboina VR, Yeo WH, Hwang SW. Recent advances in soft, implantable electronics for dynamic organs. Biosens Bioelectron 2024; 261:116472. [PMID: 38878696 DOI: 10.1016/j.bios.2024.116472] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/31/2024] [Revised: 05/29/2024] [Accepted: 06/05/2024] [Indexed: 07/02/2024]
Abstract
Unlike conventional rigid counterparts, soft and stretchable electronics forms crack- or defect-free conformal interfaces with biological tissues, enabling precise and reliable interventions in diagnosis and treatment of human diseases. Intrinsically soft and elastic materials, and device designs of innovative configurations and structures leads to the emergence of such features, particularly, the mechanical compliance provides seamless integration into continuous movements and deformations of dynamic organs such as the bladder and heart, without disrupting natural physiological functions. This review introduces the development of soft, implantable electronics tailored for dynamic organs, covering various materials, mechanical design strategies, and representative applications for the bladder and heart, and concludes with insights into future directions toward clinically relevant tools.
Collapse
Affiliation(s)
- Won Bae Han
- George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA, 30332, USA; IEN Center for Wearable Intelligent Systems and Healthcare, Georgia Institute of Technology, Atlanta, GA, 30332, USA; KU-KIST Graduate School of Converging Science and Technology, Korea University, Seoul, 02841, Republic of Korea
| | - Tae-Min Jang
- KU-KIST Graduate School of Converging Science and Technology, Korea University, Seoul, 02841, Republic of Korea
| | - Beomjune Shin
- George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA, 30332, USA; IEN Center for Wearable Intelligent Systems and Healthcare, Georgia Institute of Technology, Atlanta, GA, 30332, USA
| | - Venkata Ramesh Naganaboina
- KU-KIST Graduate School of Converging Science and Technology, Korea University, Seoul, 02841, Republic of Korea
| | - Woon-Hong Yeo
- George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA, 30332, USA; IEN Center for Wearable Intelligent Systems and Healthcare, Georgia Institute of Technology, Atlanta, GA, 30332, USA; Wallace H. Coulter Department of Biomedical Engineering, Georgia Tech and Emory University School of Medicine, Atlanta, GA, 30332, USA; Parker H. Petit Institute for Bioengineering and Biosciences, Institute for Materials, Institute for Robotics and Intelligent Machines, Georgia Institute of Technology, Atlanta, GA, 30332, USA
| | - Suk-Won Hwang
- KU-KIST Graduate School of Converging Science and Technology, Korea University, Seoul, 02841, Republic of Korea; Center for Biomaterials, Biomedical Research Institute, Korea Institute of Science and Technology (KIST), Seoul, 02792, Republic of Korea; Department of Integrative Energy Engineering, Korea University, Seoul, 02841, Republic of Korea.
| |
Collapse
|
2
|
Ruiz-Mateos Serrano R, Aguzin A, Mitoudi-Vagourdi E, Tao X, Naegele TE, Jin AT, Lopez-Larrea N, Picchio ML, Vinicio Alban-Paccha M, Minari RJ, Mecerreyes D, Dominguez-Alfaro A, Malliaras GG. 3D printed PEDOT:PSS-based conducting and patternable eutectogel electrodes for machine learning on textiles. Biomaterials 2024; 310:122624. [PMID: 38805956 DOI: 10.1016/j.biomaterials.2024.122624] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/06/2024] [Revised: 04/26/2024] [Accepted: 05/19/2024] [Indexed: 05/30/2024]
Abstract
The proliferation of medical wearables necessitates the development of novel electrodes for cutaneous electrophysiology. In this work, poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) is combined with a deep eutectic solvent (DES) and polyethylene glycol diacrylate (PEGDA) to develop printable and biocompatible electrodes for long-term cutaneous electrophysiology recordings. The impact of printing parameters on the conducting properties, morphological characteristics, mechanical stability and biocompatibility of the material were investigated. The optimised eutectogel formulations were fabricated in four different patterns -flat, pyramidal, striped and wavy- to explore the influence of electrode geometry on skin conformability and mechanical contact. These electrodes were employed for impedance and forearm EMG measurements. Furthermore, arrays of twenty electrodes were embedded into a textile and used to generate body surface potential maps (BSPMs) of the forearm, where different finger movements were recorded and analysed. Finally, BSPMs for three different letters (B, I, O) in sign-language were recorded and used to train a logistic regressor classifier able to reliably identify each letter. This novel cutaneous electrode fabrication approach offers new opportunities for long-term electrophysiological recordings, online sign-language translation and brain-machine interfaces.
Collapse
Affiliation(s)
- Ruben Ruiz-Mateos Serrano
- Electrical Engineering Division, Department of Engineering, University of Cambridge, 9 JJ Thomson Ave, Cambridge, CB3 0FA, UK
| | - Ana Aguzin
- Group of Polymers and Polymerization Reactors, INTEC, National University of the Litoral - CONICET, Güemes 3450, Santa Fe, 3000, Argentina
| | - Eleni Mitoudi-Vagourdi
- Electrical Engineering Division, Department of Engineering, University of Cambridge, 9 JJ Thomson Ave, Cambridge, CB3 0FA, UK
| | - Xudong Tao
- Electrical Engineering Division, Department of Engineering, University of Cambridge, 9 JJ Thomson Ave, Cambridge, CB3 0FA, UK
| | - Tobias E Naegele
- Electrical Engineering Division, Department of Engineering, University of Cambridge, 9 JJ Thomson Ave, Cambridge, CB3 0FA, UK
| | - Amy T Jin
- Electrical Engineering Division, Department of Engineering, University of Cambridge, 9 JJ Thomson Ave, Cambridge, CB3 0FA, UK
| | - Naroa Lopez-Larrea
- POLYMAT, University of the Basque Country UPV/EHU, Avenida Tolosa 72, Donostia-San Sebastián, Gipuzkoa, 20018, Spain
| | - Matías L Picchio
- POLYMAT, University of the Basque Country UPV/EHU, Avenida Tolosa 72, Donostia-San Sebastián, Gipuzkoa, 20018, Spain; Group of Polymers and Polymerization Reactors, INTEC, National University of the Litoral - CONICET, Güemes 3450, Santa Fe, 3000, Argentina
| | - Marco Vinicio Alban-Paccha
- Electrical Engineering Division, Department of Engineering, University of Cambridge, 9 JJ Thomson Ave, Cambridge, CB3 0FA, UK; Division of Anaesthesia, Department of Medicine, University of Cambridge, Addenbrooke's Hospital, Hills Road, Cambridge, UK
| | - Roque J Minari
- Group of Polymers and Polymerization Reactors, INTEC, National University of the Litoral - CONICET, Güemes 3450, Santa Fe, 3000, Argentina
| | - David Mecerreyes
- POLYMAT, University of the Basque Country UPV/EHU, Avenida Tolosa 72, Donostia-San Sebastián, Gipuzkoa, 20018, Spain; IKERBASQUE, Basque Foundation for Science, 48009, Bilbao, Spain
| | - Antonio Dominguez-Alfaro
- Electrical Engineering Division, Department of Engineering, University of Cambridge, 9 JJ Thomson Ave, Cambridge, CB3 0FA, UK.
| | - George G Malliaras
- Electrical Engineering Division, Department of Engineering, University of Cambridge, 9 JJ Thomson Ave, Cambridge, CB3 0FA, UK.
| |
Collapse
|
3
|
Yu S, Sun X, Liu J, Li S. OECT - Inspired electrical detection. Talanta 2024; 275:126180. [PMID: 38703480 DOI: 10.1016/j.talanta.2024.126180] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/28/2024] [Revised: 04/16/2024] [Accepted: 04/27/2024] [Indexed: 05/06/2024]
Abstract
Organic Electrochemical Transistors (OECTs) are integral in detecting human bioelectric signals, attributing their significance to distinct electrochemical properties, the utilization of soft materials, compact dimensions, and pronounced biocompatibility. This review traverses the technological evolution of OECT, highlighting its profound impact on non-invasive detection methodologies within the biomedicalfield. Four sensor types rooted in OECT technology were introduced: Electrocardiogram (ECG), Electroencephalogram (EEG), Electromyography (EMG), and Electrooculography (EOG), which hold promise for integration into wearable detection systems. The fundamental detection principles, material compositions, and functional attributes of these sensors are examined. Additionally, the performance metrics and delineates viable optimization strategies for assorted physiological electrical detection sensors are discussed. The overarching goal of this review is to foster deeper insights into the generation, propagation, and modulation of electrophysiological signals, thereby advancing the application and development of OECT in medical sciences.
Collapse
Affiliation(s)
- Shixin Yu
- School of Automation Engineering, Northeast Electric Power University, Jilin, 132012, China
| | - Xiaojun Sun
- School of Automation Engineering, Northeast Electric Power University, Jilin, 132012, China
| | - Jingjing Liu
- School of Automation Engineering, Northeast Electric Power University, Jilin, 132012, China.
| | - Shuang Li
- Academy of Medical Engineering and Translational Medicine, Tianjin University, Tianjin, 300072, China.
| |
Collapse
|
4
|
Asahina Y, Hinata M, Tanaka A, Oshio K, Ogawa H, Aihara M, Onodera H, Ushiku T. Transparency-enhancing technology allows the three-dimensional assessment of esophageal carcinoma obtained by endoscopic submucosal dissection. Esophagus 2024; 21:405-409. [PMID: 38498095 PMCID: PMC11199231 DOI: 10.1007/s10388-024-01055-x] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 11/01/2023] [Accepted: 03/01/2024] [Indexed: 03/19/2024]
Abstract
BACKGROUND Although much progress has been made in diagnosis of carcinomas, no established methods have been confirmed to elucidate their morphological features. METHODS Three-dimensional structure of esophageal carcinomas was assessed using transparency-enhancing technology. Endoscopically resected esophageal squamous cell carcinoma was fluorescently stained, optically cleared using a transparency-enhancing reagent called LUCID, and visualized using laser scanning microscopy. The resulting microscope images were converted to virtual HE images for observation using ImageJ software. RESULTS Microscopic observation and image editing enabled three-dimensional image reconstruction and conversion to virtual HE images. The structure of abnormal blood vessels in esophageal carcinoma recognized by endoscopy could be observed in the 3 dimensions. Squamous cell carcinoma and normal squamous epithelium could be distinguished in the virtual HE images. CONCLUSIONS The results suggested that transparency-enhancing technology and virtual HE images may be feasible for clinical application and represent a novel histopathological method for evaluating endoscopically resected specimens.
Collapse
Affiliation(s)
- Yuichi Asahina
- Department of Ophthalmology, Graduate School of Medicine, The University of Tokyo, 7-3-1, Hongo, Bunkyo-ku, Tokyo, 113-8655, Japan
- Department of Pathology, Graduate School of Medicine, The University of Tokyo, 7-3-1, Hongo, Bunkyo-ku, Tokyo, 113-8655, Japan
| | - Munetoshi Hinata
- Department of Pathology, Graduate School of Medicine, The University of Tokyo, 7-3-1, Hongo, Bunkyo-ku, Tokyo, 113-8655, Japan
| | - Asami Tanaka
- Photon Science Center, The University of Tokyo, 7-3-1, Hongo, Bunkyo-ku, Tokyo, 113-8656, Japan
| | - Kaori Oshio
- Department of Pathology, Graduate School of Medicine, The University of Tokyo, 7-3-1, Hongo, Bunkyo-ku, Tokyo, 113-8655, Japan
- Department of Gastroenterology, The University of Tokyo, 7-3-1, Hongo, Bunkyo-ku, Tokyo, 113-8655, Japan
| | - Haruki Ogawa
- Department of Pathology, Graduate School of Medicine, The University of Tokyo, 7-3-1, Hongo, Bunkyo-ku, Tokyo, 113-8655, Japan
- Department of Surgery, The University of Tokyo, 7-3-1, Hongo, Bunkyo-ku, Tokyo, 113-8655, Japan
| | - Makoto Aihara
- Department of Ophthalmology, Graduate School of Medicine, The University of Tokyo, 7-3-1, Hongo, Bunkyo-ku, Tokyo, 113-8655, Japan
| | - Hiroshi Onodera
- Institute for Photon Science and Technology, The University of Tokyo, 7-3-1, Hongo, Bunkyo-ku, Tokyo, 113-8656, Japan
| | - Tetsuo Ushiku
- Department of Pathology, Graduate School of Medicine, The University of Tokyo, 7-3-1, Hongo, Bunkyo-ku, Tokyo, 113-8655, Japan.
| |
Collapse
|
5
|
Lu P, Liao X, Guo X, Cai C, Liu Y, Chi M, Du G, Wei Z, Meng X, Nie S. Gel-Based Triboelectric Nanogenerators for Flexible Sensing: Principles, Properties, and Applications. NANO-MICRO LETTERS 2024; 16:206. [PMID: 38819527 PMCID: PMC11143175 DOI: 10.1007/s40820-024-01432-2] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/08/2024] [Accepted: 04/30/2024] [Indexed: 06/01/2024]
Abstract
The rapid development of the Internet of Things and artificial intelligence technologies has increased the need for wearable, portable, and self-powered flexible sensing devices. Triboelectric nanogenerators (TENGs) based on gel materials (with excellent conductivity, mechanical tunability, environmental adaptability, and biocompatibility) are considered an advanced approach for developing a new generation of flexible sensors. This review comprehensively summarizes the recent advances in gel-based TENGs for flexible sensors, covering their principles, properties, and applications. Based on the development requirements for flexible sensors, the working mechanism of gel-based TENGs and the characteristic advantages of gels are introduced. Design strategies for the performance optimization of hydrogel-, organogel-, and aerogel-based TENGs are systematically summarized. In addition, the applications of gel-based TENGs in human motion sensing, tactile sensing, health monitoring, environmental monitoring, human-machine interaction, and other related fields are summarized. Finally, the challenges of gel-based TENGs for flexible sensing are discussed, and feasible strategies are proposed to guide future research.
Collapse
Affiliation(s)
- Peng Lu
- School of Light Industry and Food Engineering, Guangxi University, Nanning, 530004, People's Republic of China
- Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing, 101400, People's Republic of China
| | - Xiaofang Liao
- School of Light Industry and Food Engineering, Guangxi University, Nanning, 530004, People's Republic of China
| | - Xiaoyao Guo
- School of Light Industry and Food Engineering, Guangxi University, Nanning, 530004, People's Republic of China
| | - Chenchen Cai
- School of Light Industry and Food Engineering, Guangxi University, Nanning, 530004, People's Republic of China
| | - Yanhua Liu
- School of Light Industry and Food Engineering, Guangxi University, Nanning, 530004, People's Republic of China
| | - Mingchao Chi
- School of Light Industry and Food Engineering, Guangxi University, Nanning, 530004, People's Republic of China
| | - Guoli Du
- School of Light Industry and Food Engineering, Guangxi University, Nanning, 530004, People's Republic of China
| | - Zhiting Wei
- School of Light Industry and Food Engineering, Guangxi University, Nanning, 530004, People's Republic of China
| | - Xiangjiang Meng
- School of Light Industry and Food Engineering, Guangxi University, Nanning, 530004, People's Republic of China
| | - Shuangxi Nie
- School of Light Industry and Food Engineering, Guangxi University, Nanning, 530004, People's Republic of China.
| |
Collapse
|
6
|
Lee S, Liang X, Kim JS, Yokota T, Fukuda K, Someya T. Permeable Bioelectronics toward Biointegrated Systems. Chem Rev 2024; 124:6543-6591. [PMID: 38728658 DOI: 10.1021/acs.chemrev.3c00823] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 05/12/2024]
Abstract
Bioelectronics integrates electronics with biological organs, sustaining the natural functions of the organs. Organs dynamically interact with the external environment, managing internal equilibrium and responding to external stimuli. These interactions are crucial for maintaining homeostasis. Additionally, biological organs possess a soft and stretchable nature; encountering objects with differing properties can disrupt their function. Therefore, when electronic devices come into contact with biological objects, the permeability of these devices, enabling interactions and substance exchanges with the external environment, and the mechanical compliance are crucial for maintaining the inherent functionality of biological organs. This review discusses recent advancements in soft and permeable bioelectronics, emphasizing materials, structures, and a wide range of applications. The review also addresses current challenges and potential solutions, providing insights into the integration of electronics with biological organs.
Collapse
Affiliation(s)
- Sunghoon Lee
- Thin-Film Device Laboratory & Center for Emergent Matter Science (CEMS), RIKEN, 2-1 Hirosawa, Wako, Saitama 351-0198, Japan
| | - Xiaoping Liang
- Electrical and Electronic Engineering and Information Systems, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-8656, Japan
| | - Joo Sung Kim
- Thin-Film Device Laboratory & Center for Emergent Matter Science (CEMS), RIKEN, 2-1 Hirosawa, Wako, Saitama 351-0198, Japan
| | - Tomoyuki Yokota
- Electrical and Electronic Engineering and Information Systems, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-8656, Japan
| | - Kenjiro Fukuda
- Thin-Film Device Laboratory & Center for Emergent Matter Science (CEMS), RIKEN, 2-1 Hirosawa, Wako, Saitama 351-0198, Japan
| | - Takao Someya
- Thin-Film Device Laboratory & Center for Emergent Matter Science (CEMS), RIKEN, 2-1 Hirosawa, Wako, Saitama 351-0198, Japan
- Electrical and Electronic Engineering and Information Systems, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-8656, Japan
| |
Collapse
|
7
|
Jinno H, Shivarudraiah SB, Asbjörn R, Vagli G, Marcato T, Eickemeyer FT, Pfeifer L, Yokota T, Someya T, Shih CJ. Indoor Self-Powered Perovskite Optoelectronics with Ultraflexible Monochromatic Light Source. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2024; 36:e2304604. [PMID: 37656902 DOI: 10.1002/adma.202304604] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/16/2023] [Revised: 07/26/2023] [Indexed: 09/03/2023]
Abstract
Self-powered skin optoelectronics fabricated on ultrathin polymer films is emerging as one of the most promising components for the next-generation Internet of Things (IoT) technology. However, a longstanding challenge is the device underperformance owing to the low process temperature of polymer substrates. In addition, broadband electroluminescence (EL) based on organic or polymer semiconductors inevitably suffers from periodic spectral distortion due to Fabry-Pérot (FP) interference upon substrate bending, preventing advanced applications. Here, ultraflexible skin optoelectronics integrating high-performance solar cells and monochromatic light-emitting diodes using solution-processed perovskite semiconductors is presented. n-i-p perovskite solar cells and perovskite nanocrystal light-emitting diodes (PNC-LEDs), with power-conversion and current efficiencies of 18.2% and 15.2 cd A-1 , respectively, are demonstrated on ultrathin polymer substrates with high thermal stability, which is a record-high efficiency for ultraflexible perovskite solar cell. The narrowband EL with a full width at half-maximum of 23 nm successfully eliminates FP interference, yielding bending-insensitive spectra even under 50% of mechanical compression. Photo-plethysmography using the skin optoelectronic device demonstrates a signal selectivity of 98.2% at 87 bpm pulse. The results presented here pave the way to inexpensive and high-performance ultrathin optoelectronics for self-powered applications such as wearable displays and indoor IoT sensors.
Collapse
Affiliation(s)
- Hiroaki Jinno
- Institute for Chemical and Bioengineering, ETH, Zurich, Zurich, 8093, Switzerland
| | | | - Rasmussen Asbjörn
- Institute for Chemical and Bioengineering, ETH, Zurich, Zurich, 8093, Switzerland
| | - Gianluca Vagli
- Institute for Chemical and Bioengineering, ETH, Zurich, Zurich, 8093, Switzerland
| | - Tommaso Marcato
- Institute for Chemical and Bioengineering, ETH, Zurich, Zurich, 8093, Switzerland
| | - Felix Thomas Eickemeyer
- Laboratory of Photonics and Interfaces, Institute of Chemical Sciences and Engineering, EPFL, Lausanne, 1015, Switzerland
| | - Lukas Pfeifer
- Laboratory of Photonics and Interfaces, Institute of Chemical Sciences and Engineering, EPFL, Lausanne, 1015, Switzerland
| | - Tomoyuki Yokota
- Electrical and Electronic Engineering and Information Systems, The University of Tokyo, 7-3-1 Bunkyo-ku, Tokyo, 113-8656, Japan
| | - Takao Someya
- Electrical and Electronic Engineering and Information Systems, The University of Tokyo, 7-3-1 Bunkyo-ku, Tokyo, 113-8656, Japan
| | - Chih-Jen Shih
- Institute for Chemical and Bioengineering, ETH, Zurich, Zurich, 8093, Switzerland
| |
Collapse
|
8
|
Fu Y, Zhu J, Sun Y, Sun S, Tie K, Qi J, Wang Y, Wang Z, Hu Y, Ding S, Huang R, Gong Z, Huang Y, Chen X, Li L, Hu W. Oxygen-Induced Barrier Lowering for High-Performance Organic Field-Effect Transistors. ACS NANO 2023. [PMID: 37487031 DOI: 10.1021/acsnano.3c04177] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 07/26/2023]
Abstract
Organic field-effect transistors (OFETs) have the advantages of low-cost, large-area processing and could be utilized in a variety of emerging applications. However, the generally large contact resistance (Rc) limits the integration and miniaturization of OFETs. The Rc is difficult to reduce due to an incompatibility between obtaining strong orbit coupling and the barrier height reduction. In this study, we developed an oxygen-induced barrier lowering strategy by introducing oxygen (O2) into the nanointerface between the electrodes and organic semiconductors layer and achieved an ultralow channel width-normalized Rc (Rc·W) of 89.8 Ω·cm and a high mobility of 11.32 cm2 V-1 s-1. This work demonstrates that O2 adsorbed at the nanointerface of metal-semiconductor contact can significantly reduce the Rc from both experiments and theoretical simulations and provides guidance for the construction of high-performance OFETs, which is conducive to the integration and miniaturization of OFETs.
Collapse
Affiliation(s)
- Yao Fu
- Key Laboratory of Organic Integrated Circuits, Ministry of Education, Tianjin Key Laboratory of Molecular Optoelectronic Sciences, Department of Chemistry, Institute of Molecular Aggregation Science, Tianjin University, Tianjin 300072, China
| | - Jie Zhu
- Key Laboratory of Organic Integrated Circuits, Ministry of Education, Tianjin Key Laboratory of Molecular Optoelectronic Sciences, Department of Chemistry, Institute of Molecular Aggregation Science, Tianjin University, Tianjin 300072, China
| | - Yajing Sun
- Key Laboratory of Organic Integrated Circuits, Ministry of Education, Tianjin Key Laboratory of Molecular Optoelectronic Sciences, Department of Chemistry, Institute of Molecular Aggregation Science, Tianjin University, Tianjin 300072, China
| | - Shougang Sun
- Key Laboratory of Organic Integrated Circuits, Ministry of Education, Tianjin Key Laboratory of Molecular Optoelectronic Sciences, Department of Chemistry, Institute of Molecular Aggregation Science, Tianjin University, Tianjin 300072, China
| | - Kai Tie
- Key Laboratory of Organic Integrated Circuits, Ministry of Education, Tianjin Key Laboratory of Molecular Optoelectronic Sciences, Department of Chemistry, Institute of Molecular Aggregation Science, Tianjin University, Tianjin 300072, China
| | - Jiannan Qi
- Key Laboratory of Organic Integrated Circuits, Ministry of Education, Tianjin Key Laboratory of Molecular Optoelectronic Sciences, Department of Chemistry, Institute of Molecular Aggregation Science, Tianjin University, Tianjin 300072, China
| | - Yanpeng Wang
- Key Laboratory of Organic Integrated Circuits, Ministry of Education, Tianjin Key Laboratory of Molecular Optoelectronic Sciences, Department of Chemistry, Institute of Molecular Aggregation Science, Tianjin University, Tianjin 300072, China
| | - Zhongwu Wang
- Key Laboratory of Organic Integrated Circuits, Ministry of Education, Tianjin Key Laboratory of Molecular Optoelectronic Sciences, Department of Chemistry, Institute of Molecular Aggregation Science, Tianjin University, Tianjin 300072, China
| | - Yongxu Hu
- Key Laboratory of Organic Integrated Circuits, Ministry of Education, Tianjin Key Laboratory of Molecular Optoelectronic Sciences, Department of Chemistry, Institute of Molecular Aggregation Science, Tianjin University, Tianjin 300072, China
| | - Shuaishuai Ding
- Key Laboratory of Organic Integrated Circuits, Ministry of Education, Tianjin Key Laboratory of Molecular Optoelectronic Sciences, Department of Chemistry, Institute of Molecular Aggregation Science, Tianjin University, Tianjin 300072, China
| | - Rong Huang
- Vacuum Interconnected Nanotech Workstation (NANO-X), Suzhou Institute of Nano-Tech and Nano-Bionics (SINANO), Chinese Academy of Sciences, Suzhou 215125, China
| | - Zhongmiao Gong
- Vacuum Interconnected Nanotech Workstation (NANO-X), Suzhou Institute of Nano-Tech and Nano-Bionics (SINANO), Chinese Academy of Sciences, Suzhou 215125, China
| | - Yinan Huang
- Key Laboratory of Organic Integrated Circuits, Ministry of Education, Tianjin Key Laboratory of Molecular Optoelectronic Sciences, Department of Chemistry, Institute of Molecular Aggregation Science, Tianjin University, Tianjin 300072, China
| | - Xiaosong Chen
- Key Laboratory of Organic Integrated Circuits, Ministry of Education, Tianjin Key Laboratory of Molecular Optoelectronic Sciences, Department of Chemistry, Institute of Molecular Aggregation Science, Tianjin University, Tianjin 300072, China
| | - Liqiang Li
- Key Laboratory of Organic Integrated Circuits, Ministry of Education, Tianjin Key Laboratory of Molecular Optoelectronic Sciences, Department of Chemistry, Institute of Molecular Aggregation Science, Tianjin University, Tianjin 300072, China
- Joint School of National University of Singapore and Tianjin University, International Campus of Tianjin University, Fuzhou 350207, China
| | - Wenping Hu
- Key Laboratory of Organic Integrated Circuits, Ministry of Education, Tianjin Key Laboratory of Molecular Optoelectronic Sciences, Department of Chemistry, Institute of Molecular Aggregation Science, Tianjin University, Tianjin 300072, China
- Joint School of National University of Singapore and Tianjin University, International Campus of Tianjin University, Fuzhou 350207, China
| |
Collapse
|
9
|
Murakami K, Isano Y, Asada J, Usami N, Isoda Y, Takano T, Matsuda R, Ueno K, Fuchiwaki O, Ota H. Self-assembling bilayer wiring with highly conductive liquid metal and insulative ion gel layers. Sci Rep 2023; 13:5929. [PMID: 37045927 PMCID: PMC10097700 DOI: 10.1038/s41598-023-32580-x] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/14/2023] [Accepted: 03/29/2023] [Indexed: 04/14/2023] Open
Abstract
Ga-based liquid metals (LMs) are expected to be suitable for wiring highly deformable devices because of their high electrical conductivity and stable resistance to extreme deformation. Injection and printed wiring, and wiring using LM-polymer composites are the most popular LM wiring approaches. However, additional processing is required to package the wiring after LM patterning, branch and interrupt wiring shape, and ensure adequate conductivity, which results in unnecessary wiring shape changes and increased complexity of the wiring methods. In this study, we propose an LM-polymer composite comprising LM particles and ion gel as a flexible matrix material with low viscosity and specific gravity before curing. Moreover, the casting method is used for wire patterning, and the material is cured at room temperature to ensure that the upper insulative layer of the ion gel self-assembles simultaneously with the formation of LM wiring in the lower layer. High conductivity and low resistance change rate of the formed wiring during deformation are achieved without an activation process. This ion gel-LM bilayer wiring can be used for three-dimensional wiring by stacking. Furthermore, circuits fabricated using ion gel-LM bilayer wiring exhibit stable operation. Therefore, the proposed method can significantly promote the development of flexible electronic devices.
Collapse
Affiliation(s)
- Koki Murakami
- Department of Mechanical Engineering, Yokohama National University, 79-5, Tokiwadai, Hodogaya-Ku, Yokohama, Kanagawa, 240-8501, Japan
| | - Yuji Isano
- Department of Mechanical Engineering, Yokohama National University, 79-5, Tokiwadai, Hodogaya-Ku, Yokohama, Kanagawa, 240-8501, Japan
| | - Juri Asada
- Department of Chemistry and Life Science, Yokohama National University, 79-5, Tokiwadai, Hodogaya-Ku, Yokohama, Kanagawa, 240-8501, Japan
| | - Natsuka Usami
- Department of Chemistry and Life Science, Yokohama National University, 79-5, Tokiwadai, Hodogaya-Ku, Yokohama, Kanagawa, 240-8501, Japan
| | - Yutaka Isoda
- Graduate School of System Integration, Yokohama National University, 79-5, Tokiwadai, Hodogaya-Ku, Yokohama, Kanagawa, 240-8501, Japan
| | - Tamami Takano
- Graduate School of System Integration, Yokohama National University, 79-5, Tokiwadai, Hodogaya-Ku, Yokohama, Kanagawa, 240-8501, Japan
| | - Ryosuke Matsuda
- Department of Mechanical Engineering, Yokohama National University, 79-5, Tokiwadai, Hodogaya-Ku, Yokohama, Kanagawa, 240-8501, Japan
| | - Kazuhide Ueno
- Department of Chemistry and Life Science, Yokohama National University, 79-5, Tokiwadai, Hodogaya-Ku, Yokohama, Kanagawa, 240-8501, Japan
- Graduate School of Engineering, Yokohama National University, 79-5, Tokiwadai, Hodogaya-Ku, Yokohama, Kanagawa, 240-8501, Japan
| | - Ohmi Fuchiwaki
- Department of Mechanical Engineering, Yokohama National University, 79-5, Tokiwadai, Hodogaya-Ku, Yokohama, Kanagawa, 240-8501, Japan.
- Graduate School of System Integration, Yokohama National University, 79-5, Tokiwadai, Hodogaya-Ku, Yokohama, Kanagawa, 240-8501, Japan.
| | - Hiroki Ota
- Department of Mechanical Engineering, Yokohama National University, 79-5, Tokiwadai, Hodogaya-Ku, Yokohama, Kanagawa, 240-8501, Japan.
- Graduate School of System Integration, Yokohama National University, 79-5, Tokiwadai, Hodogaya-Ku, Yokohama, Kanagawa, 240-8501, Japan.
| |
Collapse
|
10
|
Song Y, Tang W, Han L, Liu Y, Shen C, Yin X, Ouyang B, Su Y, Guo X. Integration of nanomaterial sensing layers on printable organic field effect transistors for highly sensitive and stable biochemical signal conversion. NANOSCALE 2023; 15:5537-5559. [PMID: 36880412 DOI: 10.1039/d2nr05863d] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/18/2023]
Abstract
Organic field effect transistor (OFET) devices are one of the most popular candidates for the development of biochemical sensors due to their merits of being flexible and highly customizable for low-cost large-area manufacturing. This review describes the key points in constructing an extended-gate type OFET (EGOFET) biochemical sensor with high sensitivity and stability. The structure and working mechanism of OFET biochemical sensors are described firstly, emphasizing the importance of critical material and device engineering to higher biochemical sensing capabilities. Next, printable materials used to construct sensing electrodes (SEs) with high sensitivity and stability are presented with a focus on novel nanomaterials. Then, methods of obtaining printable OFET devices with steep subthreshold swing (SS) for high transconductance efficiency are introduced. Finally, approaches for the integration of OFETs and SEs to form portable biochemical sensor chips are introduced, followed by several demonstrations of sensory systems. This review will provide guidelines for optimizing the design and manufacturing of OFET biochemical sensors and accelerating the movement of OFET biochemical sensors from the laboratory to the marketplace.
Collapse
Affiliation(s)
- Yawen Song
- School of Electronic Information and Electrical Engineering, Shanghai Jiao Tong University, Shanghai 200240, China.
| | - Wei Tang
- School of Electronic Information and Electrical Engineering, Shanghai Jiao Tong University, Shanghai 200240, China.
| | - Lei Han
- School of Electronic Information and Electrical Engineering, Shanghai Jiao Tong University, Shanghai 200240, China.
| | - Yan Liu
- School of Electronic Information and Electrical Engineering, Shanghai Jiao Tong University, Shanghai 200240, China.
| | - Chaochao Shen
- School of Electronic Information and Electrical Engineering, Shanghai Jiao Tong University, Shanghai 200240, China.
| | - Xiaokuan Yin
- School of Electronic Information and Electrical Engineering, Shanghai Jiao Tong University, Shanghai 200240, China.
| | - Bang Ouyang
- School of Electronic Information and Electrical Engineering, Shanghai Jiao Tong University, Shanghai 200240, China.
| | - Yuezeng Su
- School of Electronic Information and Electrical Engineering, Shanghai Jiao Tong University, Shanghai 200240, China.
| | - Xiaojun Guo
- School of Electronic Information and Electrical Engineering, Shanghai Jiao Tong University, Shanghai 200240, China.
| |
Collapse
|
11
|
Nawaz A, Merces L, Ferro LMM, Sonar P, Bufon CCB. Impact of Planar and Vertical Organic Field-Effect Transistors on Flexible Electronics. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2023; 35:e2204804. [PMID: 36124375 DOI: 10.1002/adma.202204804] [Citation(s) in RCA: 15] [Impact Index Per Article: 15.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/27/2022] [Revised: 09/13/2022] [Indexed: 06/15/2023]
Abstract
The development of flexible and conformable devices, whose performance can be maintained while being continuously deformed, provides a significant step toward the realization of next-generation wearable and e-textile applications. Organic field-effect transistors (OFETs) are particularly interesting for flexible and lightweight products, because of their low-temperature solution processability, and the mechanical flexibility of organic materials that endows OFETs the natural compatibility with plastic and biodegradable substrates. Here, an in-depth review of two competing flexible OFET technologies, planar and vertical OFETs (POFETs and VOFETs, respectively) is provided. The electrical, mechanical, and physical properties of POFETs and VOFETs are critically discussed, with a focus on four pivotal applications (integrated logic circuits, light-emitting devices, memories, and sensors). It is pointed out that the flexible function of the relatively newer VOFET technology, along with its perspective on advancing the applicability of flexible POFETs, has not been reviewed so far, and the direct comparison regarding the performance of POFET- and VOFET-based flexible applications is most likely absent. With discussions spanning printed and wearable electronics, materials science, biotechnology, and environmental monitoring, this contribution is a clear stimulus to researchers working in these fields to engage toward the plentiful possibilities that POFETs and VOFETs offer to flexible electronics.
Collapse
Affiliation(s)
- Ali Nawaz
- Center for Sensors and Devices, Bruno Kessler Foundation (FBK), Trento, 38123, Italy
| | - Leandro Merces
- Research Center for Materials, Architectures and Integration of Nanomembranes (MAIN), Chemnitz University of Technology, 09126, Chemnitz, Germany
- Brazilian Nanotechnology National Laboratory (LNNano), Brazilian Center for Research in Energy and Materials (CNPEM), Campinas, São Paulo, 13083-100, Brazil
| | - Letícia M M Ferro
- Research Center for Materials, Architectures and Integration of Nanomembranes (MAIN), Chemnitz University of Technology, 09126, Chemnitz, Germany
- Brazilian Nanotechnology National Laboratory (LNNano), Brazilian Center for Research in Energy and Materials (CNPEM), Campinas, São Paulo, 13083-100, Brazil
- Institute of Chemistry, University of Campinas, Campinas, São Paulo, 13083-970, Brazil
| | - Prashant Sonar
- School of Chemistry and Physics, Queensland University of Technology (QUT), Brisbane, QLD, 4000, Australia
- Centre for Materials Science, Queensland University of Technology, 2 George Street, Brisbane, QLD, 4000, Australia
| | - Carlos C B Bufon
- MackGraphe - Graphene and Nanomaterials Research Center, Mackenzie Presbyterian Institute, São Paulo, 01302-907, Brazil
| |
Collapse
|
12
|
Liu K, Wang C, Liu B, Bian Y, Kuang J, Hou Y, Pan Z, Liu G, Huang X, Zhu Z, Qin M, Zhao Z, Jiang C, Liu Y, Guo Y. Low-Voltage Intrinsically Stretchable Organic Transistor Amplifiers for Ultrasensitive Electrophysiological Signal Detection. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2023; 35:e2207006. [PMID: 36385514 DOI: 10.1002/adma.202207006] [Citation(s) in RCA: 6] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/02/2022] [Revised: 10/18/2022] [Indexed: 06/16/2023]
Abstract
Stretchability is a prerequisite for electronic skin devices. However, state-of-the-art stretchable thin-film transistors do not possess sufficiently low operating voltages and good stability, significantly limiting their use in real-world biomedical applications. Herein, a van der Waals-controlling elastomer/carbon quantum dot interfacial polarization methodology is proposed to form a hybrid polymer dielectric with 620% tensile strain and large-area film uniformity (>A4 paper size). Using the hybrid polymer dielectrics, the prepared intrinsically stretchable organic thin-film transistors demonstrate a low operating voltage below 5 V, 100% strain tolerance, and excellent operational stability, as well as a high on-current/off-current ratio of 105 and a steep subthreshold slope of 500 mV dec-1 . Based on this device technology, an amplifier with a high gain of 90 V V-1 among the highest values of reported stretchable transistors is realized. This amplifier is at the first time applied to detect human electrophysical signals with an output signal amplitude of over 0.2 V, which even outperforms other types of the state-of-the-art organic amplifiers for human electrophysiology monitoring. This stretchable device technology sufficiently meets the safety and portability requirements of wearable biomedical applications, opening a new opportunity to e-skin with signal control and amplification capabilities.
Collapse
Affiliation(s)
- Kai Liu
- Beijing National Laboratory for Molecular Sciences, Key Laboratory of Organic Solids, Institute of Chemistry Chinese Academy of Sciences, Beijing, 100190, P. R. China
- School of Chemistry and Chemical Engineering, University of Chinese Academy of Sciences, Beijing, 100049, P. R. China
| | - Chengyu Wang
- Beijing National Laboratory for Molecular Sciences, Key Laboratory of Organic Solids, Institute of Chemistry Chinese Academy of Sciences, Beijing, 100190, P. R. China
- School of Chemistry and Chemical Engineering, University of Chinese Academy of Sciences, Beijing, 100049, P. R. China
| | - Bowen Liu
- BNRist/ICFC/CFET, Department of Electronic Engineering, Tsinghua University, Beijing, 100084, P. R. China
| | - Yangshuang Bian
- Beijing National Laboratory for Molecular Sciences, Key Laboratory of Organic Solids, Institute of Chemistry Chinese Academy of Sciences, Beijing, 100190, P. R. China
- School of Chemistry and Chemical Engineering, University of Chinese Academy of Sciences, Beijing, 100049, P. R. China
| | - Junhua Kuang
- Beijing National Laboratory for Molecular Sciences, Key Laboratory of Organic Solids, Institute of Chemistry Chinese Academy of Sciences, Beijing, 100190, P. R. China
- School of Chemistry and Chemical Engineering, University of Chinese Academy of Sciences, Beijing, 100049, P. R. China
| | - Yangkun Hou
- BNRist/ICFC/CFET, Department of Electronic Engineering, Tsinghua University, Beijing, 100084, P. R. China
| | - Zhichao Pan
- Beijing National Laboratory for Molecular Sciences, Key Laboratory of Organic Solids, Institute of Chemistry Chinese Academy of Sciences, Beijing, 100190, P. R. China
- School of Chemistry and Chemical Engineering, University of Chinese Academy of Sciences, Beijing, 100049, P. R. China
| | - Guocai Liu
- Beijing National Laboratory for Molecular Sciences, Key Laboratory of Organic Solids, Institute of Chemistry Chinese Academy of Sciences, Beijing, 100190, P. R. China
- School of Chemistry and Chemical Engineering, University of Chinese Academy of Sciences, Beijing, 100049, P. R. China
| | - Xin Huang
- Beijing National Laboratory for Molecular Sciences, Key Laboratory of Organic Solids, Institute of Chemistry Chinese Academy of Sciences, Beijing, 100190, P. R. China
- School of Chemistry and Chemical Engineering, University of Chinese Academy of Sciences, Beijing, 100049, P. R. China
| | - Zhiheng Zhu
- Beijing National Laboratory for Molecular Sciences, Key Laboratory of Organic Solids, Institute of Chemistry Chinese Academy of Sciences, Beijing, 100190, P. R. China
- School of Chemistry and Chemical Engineering, University of Chinese Academy of Sciences, Beijing, 100049, P. R. China
| | - Mingcong Qin
- Beijing National Laboratory for Molecular Sciences, Key Laboratory of Organic Solids, Institute of Chemistry Chinese Academy of Sciences, Beijing, 100190, P. R. China
- School of Chemistry and Chemical Engineering, University of Chinese Academy of Sciences, Beijing, 100049, P. R. China
| | - Zhiyuan Zhao
- Beijing National Laboratory for Molecular Sciences, Key Laboratory of Organic Solids, Institute of Chemistry Chinese Academy of Sciences, Beijing, 100190, P. R. China
- School of Chemistry and Chemical Engineering, University of Chinese Academy of Sciences, Beijing, 100049, P. R. China
| | - Chen Jiang
- BNRist/ICFC/CFET, Department of Electronic Engineering, Tsinghua University, Beijing, 100084, P. R. China
| | - Yunqi Liu
- Beijing National Laboratory for Molecular Sciences, Key Laboratory of Organic Solids, Institute of Chemistry Chinese Academy of Sciences, Beijing, 100190, P. R. China
- School of Chemistry and Chemical Engineering, University of Chinese Academy of Sciences, Beijing, 100049, P. R. China
| | - Yunlong Guo
- Beijing National Laboratory for Molecular Sciences, Key Laboratory of Organic Solids, Institute of Chemistry Chinese Academy of Sciences, Beijing, 100190, P. R. China
- School of Chemistry and Chemical Engineering, University of Chinese Academy of Sciences, Beijing, 100049, P. R. China
| |
Collapse
|
13
|
Wang Q, Wang XF, Sun WQ, Lin RL, Ye MF, Liu JX. Supramolecular Host-Guest Hydrogel Based on γ-Cyclodextrin and Carboxybenzyl Viologen Showing Reversible Photochromism and Photomodulable Fluorescence. ACS APPLIED MATERIALS & INTERFACES 2023; 15:2479-2485. [PMID: 36583679 DOI: 10.1021/acsami.2c20153] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/17/2023]
Abstract
Much effort has been devoted to the development of supramolecular hydrogels due to their broad applications and conveniently controllable properties. Here, we demonstrate a novel supramolecular host-guest hydrogel, which is constructed by the host γ-CD complexed with the guest 1-(4-carboxybenzyl)-4,4'-bipyridinium chloride (1+·Cl-) through the π···π interaction, hydrogen bonding, and host-guest interactions. The supramolecular hydrogel [1+@γ-CD]n exhibits reversible electron transfer photochromic behavior and photomodulable fluorescence. The excellent photochromic and fluorescence properties support the practical utility of the supramolecular hydrogel as a visual display and anti-counterfeiting material.
Collapse
Affiliation(s)
- Qin Wang
- College of Chemistry and Chemical Engineering, Anhui University of Technology, Maanshan, Anhui 243002, China
| | - Xiao-Feng Wang
- College of Chemistry and Chemical Engineering, Anhui University of Technology, Maanshan, Anhui 243002, China
| | - Wen-Qi Sun
- College of Chemistry and Chemical Engineering, Anhui University of Technology, Maanshan, Anhui 243002, China
| | - Rui-Lian Lin
- College of Chemistry and Chemical Engineering, Anhui University of Technology, Maanshan, Anhui 243002, China
| | - Ming-Fu Ye
- College of Chemistry and Chemical Engineering, Anhui University of Technology, Maanshan, Anhui 243002, China
- Anhui Province Key Laboratory of Chemistry for Inorganic/Organic Hybrid Functionalized Materials, Anhui University, Hefei, Anhui 230601, China
| | - Jing-Xin Liu
- College of Chemistry and Chemical Engineering, Anhui University of Technology, Maanshan, Anhui 243002, China
| |
Collapse
|
14
|
Kiyama R, Yoshida M, Nonoyama T, Sedlačík T, Jinnai H, Kurokawa T, Nakajima T, Gong JP. Nanoscale TEM Imaging of Hydrogel Network Architecture. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2023; 35:e2208902. [PMID: 36349878 DOI: 10.1002/adma.202208902] [Citation(s) in RCA: 4] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/27/2022] [Revised: 11/03/2022] [Indexed: 06/16/2023]
Abstract
In this work, the authors succeed in direct visualization of the network structure of synthetic hydrogels with transmission electron microscopy (TEM) by developing a novel staining and network fixation method. Such a direct visualization is not carried out because sample preparation and obtaining sufficient contrast are challenging for these soft materials. TEM images reveal robust heterogeneous network architectures at mesh size scale and defects at micro-scale. TEM images also reveal the presence of abundant dangling chains on the surface of the hydrogel network. The real space structural information provides a comprehensive perspective that links bulk properties with a nanoscale network structure, including fracture, adhesion, sliding friction, and lubrication. The presented method has the potential to advance the field.
Collapse
Affiliation(s)
- Ryuji Kiyama
- Faculty of Advanced Life Science, Hokkaido University, Sapporo, 001-0021, Japan
| | - Masahiro Yoshida
- Graduate School of Life Science, Hokkaido University, Sapporo, 001-0021, Japan
| | - Takayuki Nonoyama
- Faculty of Advanced Life Science, Hokkaido University, Sapporo, 001-0021, Japan
- Global Station for Soft Matter, Global Institution for Collaborative Research and Education (GI-CoRE), Hokkaido University, Sapporo, 001-0021, Japan
| | - Tomáš Sedlačík
- Faculty of Advanced Life Science, Hokkaido University, Sapporo, 001-0021, Japan
- Global Station for Soft Matter, Global Institution for Collaborative Research and Education (GI-CoRE), Hokkaido University, Sapporo, 001-0021, Japan
| | - Hiroshi Jinnai
- Institute of Multidisciplinary Research for Advanced Materials, Tohoku University, Sendai, 980-8577, Japan
| | - Takayuki Kurokawa
- Faculty of Advanced Life Science, Hokkaido University, Sapporo, 001-0021, Japan
- Global Station for Soft Matter, Global Institution for Collaborative Research and Education (GI-CoRE), Hokkaido University, Sapporo, 001-0021, Japan
| | - Tasuku Nakajima
- Faculty of Advanced Life Science, Hokkaido University, Sapporo, 001-0021, Japan
- Global Station for Soft Matter, Global Institution for Collaborative Research and Education (GI-CoRE), Hokkaido University, Sapporo, 001-0021, Japan
- Institute for Chemical Reaction Design and Discovery (WPI-ICReDD), Hokkaido University, Sapporo, 001-0021, Japan
| | - Jian Ping Gong
- Faculty of Advanced Life Science, Hokkaido University, Sapporo, 001-0021, Japan
- Global Station for Soft Matter, Global Institution for Collaborative Research and Education (GI-CoRE), Hokkaido University, Sapporo, 001-0021, Japan
- Institute for Chemical Reaction Design and Discovery (WPI-ICReDD), Hokkaido University, Sapporo, 001-0021, Japan
| |
Collapse
|
15
|
Zhuo F, Wu J, Li B, Li M, Tan CL, Luo Z, Sun H, Xu Y, Yu Z. Modifying the Power and Performance of 2-Dimensional MoS 2 Field Effect Transistors. RESEARCH (WASHINGTON, D.C.) 2023; 6:0057. [PMID: 36939429 PMCID: PMC10016345 DOI: 10.34133/research.0057] [Citation(s) in RCA: 4] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/28/2022] [Accepted: 01/02/2023] [Indexed: 01/13/2023]
Abstract
Over the past 60 years, the semiconductor industry has been the core driver for the development of information technology, contributing to the birth of integrated circuits, Internet, artificial intelligence, and Internet of Things. Semiconductor technology has been evolving in structure and material with co-optimization of performance-power-area-cost until the state-of-the-art sub-5-nm node. Two-dimensional (2D) semiconductors are recognized by the industry and academia as a hopeful solution to break through the quantum confinement for the future technology nodes. In the recent 10 years, the key issues on 2D semiconductors regarding material, processing, and integration have been overcome in sequence, making 2D semiconductors already on the verge of application. In this paper, the evolution of transistors is reviewed by outlining the potential of 2D semiconductors as a technological option beyond the scaled metal oxide semiconductor field-effect transistors. We mainly focus on the optimization strategies of mobility (μ), equivalent oxide thickness (EOT), and contact resistance (RC ), which enables high ON current (Ion ) with reduced driving voltage (Vdd ). Finally, we prospect the semiconductor technology roadmap by summarizing the technological development of 2D semiconductors over the past decade.
Collapse
Affiliation(s)
- Fulin Zhuo
- College of Integrated Circuit Science and Engineering,
Nanjing University of Posts and Telecommunications, Nanjing 210023, China
| | - Jie Wu
- College of Integrated Circuit Science and Engineering,
Nanjing University of Posts and Telecommunications, Nanjing 210023, China
| | - Binhong Li
- Guangdong Greater Bay Area Institute of Integrated Circuit and System, Guangzhou 510535, China
- Institute of Microelectronics,
Chinese Academy of Sciences, Beijing 100029, China
- Address correspondence to: (B.L.); (Z.L.); (H.S.); (Y.X.); (Z.Y.)
| | - Moyang Li
- College of Integrated Circuit Science and Engineering,
Nanjing University of Posts and Telecommunications, Nanjing 210023, China
| | - Chee Leong Tan
- College of Integrated Circuit Science and Engineering,
Nanjing University of Posts and Telecommunications, Nanjing 210023, China
| | - Zhongzhong Luo
- College of Electronic and Optical Engineering and College of Flexible Electronics (Future Technology),
Nanjing University of Posts and Telecommunications, Nanjing 210023, China
- Address correspondence to: (B.L.); (Z.L.); (H.S.); (Y.X.); (Z.Y.)
| | - Huabin Sun
- College of Integrated Circuit Science and Engineering,
Nanjing University of Posts and Telecommunications, Nanjing 210023, China
- Guangdong Greater Bay Area Institute of Integrated Circuit and System, Guangzhou 510535, China
- Address correspondence to: (B.L.); (Z.L.); (H.S.); (Y.X.); (Z.Y.)
| | - Yong Xu
- College of Integrated Circuit Science and Engineering,
Nanjing University of Posts and Telecommunications, Nanjing 210023, China
- Guangdong Greater Bay Area Institute of Integrated Circuit and System, Guangzhou 510535, China
- Address correspondence to: (B.L.); (Z.L.); (H.S.); (Y.X.); (Z.Y.)
| | - Zhihao Yu
- College of Integrated Circuit Science and Engineering,
Nanjing University of Posts and Telecommunications, Nanjing 210023, China
- Guangdong Greater Bay Area Institute of Integrated Circuit and System, Guangzhou 510535, China
- Address correspondence to: (B.L.); (Z.L.); (H.S.); (Y.X.); (Z.Y.)
| |
Collapse
|
16
|
Taguchi K, Uemura T, Petritz A, Namba N, Akiyama M, Sugiyama M, Araki T, Stadlober B, Sekitani T. Fine-Tuning the Performance of Ultraflexible Organic Complementary Circuits on a Single Substrate via a Nanoscale Interfacial Photochemical Reaction. ACS APPLIED ELECTRONIC MATERIALS 2022; 4:6308-6321. [PMID: 36588622 PMCID: PMC9798987 DOI: 10.1021/acsaelm.2c01444] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 10/25/2022] [Accepted: 11/21/2022] [Indexed: 06/17/2023]
Abstract
Flexible electronics has paved the way toward the development of next-generation wearable and implantable healthcare devices, including multimodal sensors. Integrating flexible circuits with transducers on a single substrate is desirable for processing vital signals. However, the trade-off between low power consumption and high operating speed is a major bottleneck. Organic thin-film transistors (OTFTs) are suitable for developing flexible circuits owing to their intrinsic flexibility and compatibility with the printing process. We used a photoreactive insulating polymer poly((±)endo,exo-bicyclo[2.2.1]hept-ene-2,3-dicarboxylic acid, diphenylester) (PNDPE) to modulate the power consumption and operating speed of ultraflexible organic circuits fabricated on a single substrate. The turn-on voltage (V on) of the p- and n-type OTFTs was controlled through a nanoscale interfacial photochemical reaction. The time-of-flight secondary ion mass spectrometry revealed the preferential occurrence of the PNDPE photochemical reaction in the vicinity of the semiconductor-dielectric interface. The power consumption and operating speed of the ultraflexible complementary inverters were tuned by a factor of 6 and 4, respectively. The minimum static power consumption was 30 ± 9 pW at transient and 4 ± 1 pW at standby. Furthermore, within the tuning range of the operating speed and at a supply voltage above 2.5 V, the minimum stage delay time was of the order of hundreds of microseconds. We demonstrated electromyogram measurements to emphasize the advantage of the nanoscale interfacial photochemical reaction. Our study suggests that a nanoscale interfacial photochemical reaction can be employed to develop imperceptible and wearable multimodal sensors with organic signal processing circuits that exhibit low power consumption.
Collapse
Affiliation(s)
- Koki Taguchi
- SANKEN
(The Institute of Scientific and Industrial Research), Osaka University, 8-1, Mihogaoka, Ibaraki, Osaka 567-0047, Japan
- Graduate
School of Engineering, Osaka University, 2-1 Yamadaoka, Suita, Osaka 565-0871, Japan
- Advanced
Photonics and Biosensing Open Innovation Laboratory, National Institute of Advanced Industrial Science and Technology
(AIST), 2-1 Yamadaoka, Suita, Osaka 565-0871, Japan
| | - Takafumi Uemura
- SANKEN
(The Institute of Scientific and Industrial Research), Osaka University, 8-1, Mihogaoka, Ibaraki, Osaka 567-0047, Japan
- Advanced
Photonics and Biosensing Open Innovation Laboratory, National Institute of Advanced Industrial Science and Technology
(AIST), 2-1 Yamadaoka, Suita, Osaka 565-0871, Japan
| | - Andreas Petritz
- JOANNEUM
RESEARCH Forschungsgesellschaft mbH MATERIALS-Institute for Surface
Technologies and Photonics, Franz-Pichler-Straße 30, Weiz 8160, Austria
| | - Naoko Namba
- SANKEN
(The Institute of Scientific and Industrial Research), Osaka University, 8-1, Mihogaoka, Ibaraki, Osaka 567-0047, Japan
- Advanced
Photonics and Biosensing Open Innovation Laboratory, National Institute of Advanced Industrial Science and Technology
(AIST), 2-1 Yamadaoka, Suita, Osaka 565-0871, Japan
| | - Mihoko Akiyama
- SANKEN
(The Institute of Scientific and Industrial Research), Osaka University, 8-1, Mihogaoka, Ibaraki, Osaka 567-0047, Japan
- Graduate
School of Engineering, Osaka University, 2-1 Yamadaoka, Suita, Osaka 565-0871, Japan
| | - Masahiro Sugiyama
- SANKEN
(The Institute of Scientific and Industrial Research), Osaka University, 8-1, Mihogaoka, Ibaraki, Osaka 567-0047, Japan
- Graduate
School of Engineering, Osaka University, 2-1 Yamadaoka, Suita, Osaka 565-0871, Japan
- Advanced
Photonics and Biosensing Open Innovation Laboratory, National Institute of Advanced Industrial Science and Technology
(AIST), 2-1 Yamadaoka, Suita, Osaka 565-0871, Japan
| | - Teppei Araki
- SANKEN
(The Institute of Scientific and Industrial Research), Osaka University, 8-1, Mihogaoka, Ibaraki, Osaka 567-0047, Japan
- Graduate
School of Engineering, Osaka University, 2-1 Yamadaoka, Suita, Osaka 565-0871, Japan
- Advanced
Photonics and Biosensing Open Innovation Laboratory, National Institute of Advanced Industrial Science and Technology
(AIST), 2-1 Yamadaoka, Suita, Osaka 565-0871, Japan
| | - Barbara Stadlober
- JOANNEUM
RESEARCH Forschungsgesellschaft mbH MATERIALS-Institute for Surface
Technologies and Photonics, Franz-Pichler-Straße 30, Weiz 8160, Austria
| | - Tsuyoshi Sekitani
- SANKEN
(The Institute of Scientific and Industrial Research), Osaka University, 8-1, Mihogaoka, Ibaraki, Osaka 567-0047, Japan
- Graduate
School of Engineering, Osaka University, 2-1 Yamadaoka, Suita, Osaka 565-0871, Japan
- Advanced
Photonics and Biosensing Open Innovation Laboratory, National Institute of Advanced Industrial Science and Technology
(AIST), 2-1 Yamadaoka, Suita, Osaka 565-0871, Japan
| |
Collapse
|
17
|
Li X, Chen Y, Tu X, Huang H. Development of a Three-Dimensional Nerve Stretch Growth Device towards an Implantable Neural Interface. MICROMACHINES 2022; 13:1558. [PMID: 36295911 PMCID: PMC9610007 DOI: 10.3390/mi13101558] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 08/15/2022] [Revised: 09/09/2022] [Accepted: 09/19/2022] [Indexed: 06/16/2023]
Abstract
Because of rising traumatic accidents and diseases, the number of patients suffering from nerve injury is increasing. Without effective rehabilitation therapy, the patients will get motor or sensory function losses or even a lifelong disability. As for amputees, neural interface technology can be used to splice nerves and electrical wires together in a way that allows them to control an artificial limb as if it was a natural extension of the body. However, the means the need for an autologous nerve to stimulate axonal regeneration and extension into target tissues, which are limited by the supply of donor nerves. Based on the principle of mechanical force regulating axon growth, in this paper, we developed a three-dimensional nerve stretch growth device for an implantable neural interface. The device consists of three motors controlled by single chip microcomputer and some mechanical parts. The stability and reliability of the device were tested. Then, we used neurons derived from human pluripotent stem cells by small chemical molecules to explore the optimal three-dimensional stretch culture parameters. Furthermore, we found that the axons were intact through 10 rotations per day and 1 mm of horizontal pulling per day. The results of this research will provide convenience for patients treated through an implantable neural interface.
Collapse
Affiliation(s)
- Xiao Li
- School of Mechanical Engineering, Hubei University of Technology, Wuhan 430068, China
| | - Yongguang Chen
- School of Mechanical Engineering, Hubei University of Technology, Wuhan 430068, China
| | - Xikai Tu
- School of Mechanical Engineering, Hubei University of Technology, Wuhan 430068, China
| | - Hailong Huang
- Department of Rehabilitation Medicine, Zhongnan Hospital of Wuhan University, Wuhan 430077, China
| |
Collapse
|
18
|
Hsieh JC, Alawieh H, Li Y, Iwane F, Zhao L, Anderson R, Abdullah S, Kevin Tang KW, Wang W, Pyatnitskiy I, Jia Y, Millán JDR, Wang H. A highly stable electrode with low electrode-skin impedance for wearable brain-computer interface. Biosens Bioelectron 2022; 218:114756. [DOI: 10.1016/j.bios.2022.114756] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/13/2022] [Revised: 09/19/2022] [Accepted: 09/23/2022] [Indexed: 11/17/2022]
|
19
|
A low-power stretchable neuromorphic nerve with proprioceptive feedback. Nat Biomed Eng 2022; 7:511-519. [PMID: 35970931 DOI: 10.1038/s41551-022-00918-x] [Citation(s) in RCA: 42] [Impact Index Per Article: 21.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/02/2021] [Accepted: 06/29/2022] [Indexed: 11/08/2022]
Abstract
By relaying neural signals from the motor cortex to muscles, devices for neurorehabilitation can enhance the movement of limbs in which nerves have been damaged as a consequence of injuries affecting the spinal cord or the lower motor neurons. However, conventional neuroprosthetic devices are rigid and power-hungry. Here we report a stretchable neuromorphic implant that restores coordinated and smooth motions in the legs of mice with neurological motor disorders, enabling the animals to kick a ball, walk or run. The neuromorphic implant acts as an artificial efferent nerve by generating electrophysiological signals from excitatory post-synaptic signals and by providing proprioceptive feedback. The device operates at low power (~1/150 that of a typical microprocessor system), and consists of hydrogel electrodes connected to a stretchable transistor incorporating an organic semiconducting nanowire (acting as an artificial synapse), connected via an ion gel to an artificial proprioceptor incorporating a carbon nanotube strain sensor (acting as an artificial muscle spindle). Stretchable electronics with proprioceptive feedback may inspire the further development of advanced neuromorphic devices for neurorehabilitation.
Collapse
|
20
|
Sheng F, Zhang B, Zhang Y, Li Y, Cheng R, Wei C, Ning C, Dong K, Wang ZL. Ultrastretchable Organogel/Silicone Fiber-Helical Sensors for Self-Powered Implantable Ligament Strain Monitoring. ACS NANO 2022; 16:10958-10967. [PMID: 35775629 DOI: 10.1021/acsnano.2c03365] [Citation(s) in RCA: 17] [Impact Index Per Article: 8.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
Implantable sensors with the abilities of real-time healthcare monitoring and auxiliary training are important for exercise-induced or disease-induced muscle and ligament injuries. However, some of these implantable sensors have some shortcomings, such as requiring an external power supply or poor flexibility and stability. Herein, an organogel/silicone fiber-helical sensor based on a triboelectric nanogenerator (OFS-TENG) is developed for power-free and sutureable implantation ligament strain monitoring. The OFS-TENG with high stability and ultrastretchability is composed of an organogel fiber and a silicone fiber intertwined with a double helix structure. The organogel fiber possesses the merits of rapid preparation (15 s), good transparency (>95%), high stretchability (600%), and favorable stability (over 6 months). The OFS-TENG is successfully implanted on the patellar ligament of the rabbit knee for the real-time monitoring of knee ligament stretch and muscle stress, which is expected to provide a solution for real-time diagnosis of muscle and ligament injuries. The prepared self-powered OFS-TENG can monitor data on human muscles and ligaments in real-time.
Collapse
Affiliation(s)
- Feifan Sheng
- CAS Center for Excellence in Nanoscience Beijing Key Laboratory of Micro-Nano Energy and Sensor, Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing, 101400, P. R. China
- School of Chemistry and Chemical Engineering, Center on Nanoenergy Research, School of Physical Science & Technology, Guangxi University, Nanning, 530004, P. R. China
| | - Bo Zhang
- National Engineering Research Center for Biomaterials, Sichuan University, Chengdu, 610064, P. R. China
| | - Yihan Zhang
- CAS Center for Excellence in Nanoscience Beijing Key Laboratory of Micro-Nano Energy and Sensor, Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing, 101400, P. R. China
- School of Nanoscience and Technology, University of Chinese Academy of Sciences Beijing, 100049, P. R. China
| | - Yanyan Li
- National Engineering Research Center for Biomaterials, Sichuan University, Chengdu, 610064, P. R. China
| | - Renwei Cheng
- CAS Center for Excellence in Nanoscience Beijing Key Laboratory of Micro-Nano Energy and Sensor, Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing, 101400, P. R. China
- School of Nanoscience and Technology, University of Chinese Academy of Sciences Beijing, 100049, P. R. China
| | - Chuanhui Wei
- CAS Center for Excellence in Nanoscience Beijing Key Laboratory of Micro-Nano Energy and Sensor, Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing, 101400, P. R. China
- School of Nanoscience and Technology, University of Chinese Academy of Sciences Beijing, 100049, P. R. China
| | - Chuan Ning
- CAS Center for Excellence in Nanoscience Beijing Key Laboratory of Micro-Nano Energy and Sensor, Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing, 101400, P. R. China
- School of Nanoscience and Technology, University of Chinese Academy of Sciences Beijing, 100049, P. R. China
| | - Kai Dong
- CAS Center for Excellence in Nanoscience Beijing Key Laboratory of Micro-Nano Energy and Sensor, Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing, 101400, P. R. China
- School of Nanoscience and Technology, University of Chinese Academy of Sciences Beijing, 100049, P. R. China
| | - Zhong Lin Wang
- CAS Center for Excellence in Nanoscience Beijing Key Laboratory of Micro-Nano Energy and Sensor, Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing, 101400, P. R. China
- School of Nanoscience and Technology, University of Chinese Academy of Sciences Beijing, 100049, P. R. China
- School of Material Science and Engineering, Georgia Institute of Technology Atlanta, Georgia 30332, United States
| |
Collapse
|
21
|
Lan L, Li F, Li W, Chen R, Xiong Z, He Y, Ouedraogo NAN, Ai B, Tao L, Sun K, Chen S. Highly Skin-Compliant Polymeric Electrodes with Synergistically Boosted Conductivity toward Wearable Health Monitoring. ACS APPLIED MATERIALS & INTERFACES 2022; 14:20113-20121. [PMID: 35467822 DOI: 10.1021/acsami.2c03596] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/14/2023]
Abstract
Despite rapid advances in stretchable electrodes, successful examples of polymeric dry electrodes are limited. Especially in wearable health monitoring, it is urgent to develop biocompatible electrodes that possess intrinsic skin-compliance while maintaining a high conductivity. Herein, a strategy is demonstrated to synergistically regulate the interpenetration behavior and molecular crystallinity in the blend via embedding a novel double network, i.e. physically cross-linked poly(vinyl alcohol) (PVA) and covalently cross-linked polyethylene glycol diacrylate (PEGDA), into the PEDOT:PSS matrix. The favorable interaction energy between PVA and PEGDA enables well-distributed microstructure with finer phase separation in the film, affording a low Young's modulus of 16 MPa with a high conductivity of 442 S/cm. Consequently, the optimal polymeric electrode can acquire high-quality electromyogram (EMG) and electrocardiogram (ECG) signals. Our results provide a feasible approach for producing skin-compliant polymeric electrodes toward next-generation health monitors.
Collapse
Affiliation(s)
- Linkai Lan
- MOE Key Laboratory of Low-grade Energy Utilization Technologies and Systems, CQU-NUS Renewable Energy Materials & Devices Joint Laboratory, School of Energy & Power Engineering, Chongqing University, Chongqing 400044, People's Republic of China
| | - Feng Li
- Laboratory of Advanced Materials, Fudan University, 220 Handan, Shanghai 200433, People's Republic of China
| | - Wen Li
- Key Laboratory of Power Transmission Equipment and System Security and New Technology, School of Electrical Engineering and State, Chongqing University, Chongqing 400044, People's Republic of China
| | - Rui Chen
- MOE Key Laboratory of Low-grade Energy Utilization Technologies and Systems, CQU-NUS Renewable Energy Materials & Devices Joint Laboratory, School of Energy & Power Engineering, Chongqing University, Chongqing 400044, People's Republic of China
| | - Zhuang Xiong
- MOE Key Laboratory of Low-grade Energy Utilization Technologies and Systems, CQU-NUS Renewable Energy Materials & Devices Joint Laboratory, School of Energy & Power Engineering, Chongqing University, Chongqing 400044, People's Republic of China
| | - Yongjie He
- MOE Key Laboratory of Low-grade Energy Utilization Technologies and Systems, CQU-NUS Renewable Energy Materials & Devices Joint Laboratory, School of Energy & Power Engineering, Chongqing University, Chongqing 400044, People's Republic of China
| | - Nabonswendé Aïda Nadège Ouedraogo
- MOE Key Laboratory of Low-grade Energy Utilization Technologies and Systems, CQU-NUS Renewable Energy Materials & Devices Joint Laboratory, School of Energy & Power Engineering, Chongqing University, Chongqing 400044, People's Republic of China
| | - Bin Ai
- Chongqing Key Laboratory of Bio perception & Intelligent Information Processing, School of Microelectronics and Communication Engineering, Chongqing University, Chongqing 400044, People's Republic of China
| | - Luqi Tao
- Key Laboratory of Power Transmission Equipment and System Security and New Technology, School of Electrical Engineering and State, Chongqing University, Chongqing 400044, People's Republic of China
| | - Kuan Sun
- MOE Key Laboratory of Low-grade Energy Utilization Technologies and Systems, CQU-NUS Renewable Energy Materials & Devices Joint Laboratory, School of Energy & Power Engineering, Chongqing University, Chongqing 400044, People's Republic of China
| | - Shanshan Chen
- MOE Key Laboratory of Low-grade Energy Utilization Technologies and Systems, CQU-NUS Renewable Energy Materials & Devices Joint Laboratory, School of Energy & Power Engineering, Chongqing University, Chongqing 400044, People's Republic of China
| |
Collapse
|
22
|
Zhang Y, van Doremaele ERW, Ye G, Stevens T, Song J, Chiechi RC, van de Burgt Y. Adaptive Biosensing and Neuromorphic Classification Based on an Ambipolar Organic Mixed Ionic-Electronic Conductor. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2022; 34:e2200393. [PMID: 35334499 DOI: 10.1002/adma.202200393] [Citation(s) in RCA: 10] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/13/2022] [Revised: 03/15/2022] [Indexed: 06/14/2023]
Abstract
Organic mixed ionic-electronic conductors (OMIECs) are central to bioelectronic applications such as biosensors, health-monitoring devices, and neural interfaces, and have facilitated efficient next-generation brain-inspired computing and biohybrid systems. Despite these examples, smart and adaptive circuits that can locally process and optimize biosignals have not yet been realized. Here, a tunable sensing circuit is shown that can locally modulate biologically relevant signals like electromyograms (EMGs) and electrocardiograms (ECGs), that is based on a complementary logic inverter combined with a neuromorphic memory element, and that is constructed from a single polymer mixed conductor. It is demonstrated that a small neuromorphic array based on this material effects high classification accuracy in heartbeat anomaly detection. This high-performance material allows for straightforward monolithic integration, which reduces fabrication complexity while also achieving high on/off ratios with excellent ambient p- and n-type stability in transistor performance. This material opens a route toward simple and straightforward fabrication and integration of more sophisticated adaptive circuits for future smart bioelectronics.
Collapse
Affiliation(s)
- Yanxi Zhang
- Microsystems, Department of Mechanical Engineering and Institute for Complex Molecular Systems, Eindhoven University of Technology, Eindhoven, MB, 5600, The Netherlands
| | - Eveline R W van Doremaele
- Microsystems, Department of Mechanical Engineering and Institute for Complex Molecular Systems, Eindhoven University of Technology, Eindhoven, MB, 5600, The Netherlands
| | - Gang Ye
- Center for Biomedical Optics and Photonics (CBOP) & College of Physics and Optoelectronic Engineering, Key Laboratory of Optoelectronic Devices and Systems, Shenzhen University, Shenzhen, 518060, P. R. China
- Stratingh Institute for Chemistry, University of Groningen, 9747 AG Groningen, The Netherlands
| | - Tim Stevens
- Microsystems, Department of Mechanical Engineering and Institute for Complex Molecular Systems, Eindhoven University of Technology, Eindhoven, MB, 5600, The Netherlands
| | - Jun Song
- Center for Biomedical Optics and Photonics (CBOP) & College of Physics and Optoelectronic Engineering, Key Laboratory of Optoelectronic Devices and Systems, Shenzhen University, Shenzhen, 518060, P. R. China
| | - Ryan C Chiechi
- Stratingh Institute for Chemistry, University of Groningen, 9747 AG Groningen, The Netherlands
- Department of Chemistry, North Carolina State University, Raleigh, NC, 27695, USA
| | - Yoeri van de Burgt
- Microsystems, Department of Mechanical Engineering and Institute for Complex Molecular Systems, Eindhoven University of Technology, Eindhoven, MB, 5600, The Netherlands
| |
Collapse
|
23
|
Oligomer Sensor Nanoarchitectonics for “Turn-On” Fluorescence Detection of Cholesterol at the Nanomolar Level. Molecules 2022; 27:molecules27092856. [PMID: 35566207 PMCID: PMC9100198 DOI: 10.3390/molecules27092856] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/07/2022] [Revised: 04/28/2022] [Accepted: 04/29/2022] [Indexed: 12/16/2022] Open
Abstract
Sensitive and rapid monitoring of cholesterol levels in the human body are highly desirable as they are directly related to the diagnosis of cardiovascular diseases. By using the nanoarchitectonic approach, a novel fluorescent conjugated oligofluorene (OFP-CD) functionalized with β-cyclodextrin (β-CD) was assembled for “Turn-On” fluorescence sensing of cholesterol. The appended β-CD units in OFP-CD enabled the forming of host-guest complexes with dabsyl chloride moieties in water, resulting in fluorescence quenching of the oligofluorene through intermolecular energy transfer. In the presence of cholesterol molecules, a more favorable host-guest complex with stoichiometry 1 cholesterol: 2 β-CD units was formed, replacing dabsyl chloride in β-CD’s cavities. This process resulted in fluorescence recovery of OFP-CD, owing to disruption of energy transfer. The potential of this nanoarchitectonic system for “Turn-On” sensing of cholesterol was extensively studied by fluorescence spectroscopy. The high selectivity of the sensor for cholesterol was demonstrated using biologically relevant interfering compounds, such as carbohydrates, amino acids, metal ions, and anions. The detection limit (LOD value) was as low as 68 nM, affirming the high sensitivity of the current system.
Collapse
|
24
|
Scholten AWJ, van Leuteren RW, de Waal CG, de Jongh FH, van Kaam AH, Hutten GJ. Feasibility of wireless cardiorespiratory monitoring with dry electrodes incorporated in a belt in preterm infants. Physiol Meas 2022; 43. [PMID: 35453135 DOI: 10.1088/1361-6579/ac69a9] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/15/2021] [Accepted: 04/22/2022] [Indexed: 11/11/2022]
Abstract
Objective Monitoring heart rate (HR) and respiratory rate (RR) is essential in preterm infants and is currently measured with ECG and chest impedance (CI), respectively. However, in current clinical practice these techniques use wired adhesive electrodes which can cause skin damage and hinder parent-infant interaction. Moreover, CI is not always reliable. We assessed the feasibility of a wireless dry electrode belt to measure HR and RR via transcutaneous diaphragmatic electromyography (dEMG). Approach In this prospective, observational study, infants were monitored up to 72 hours with the belt and standard CI. Feasibility of the belt was expressed by its ability to retrieve a respiratory waveform from dEMG, determining the percentage of time with stable respiration data without signal errors ('lead-off' and Bluetooth Loss Error, 'BLE'), skin-friendliness of the belt (skin score) and by exploring the ability to monitor trends in HR and RR with the belt. Main results In all 19 included infants (median gestational age 27.3 weeks) a respiratory waveform could be obtained. The amount of signal errors was low (lead-off 0.5% (IQR 0.1-1.6) and BLE 0.3% (IQR 0.1-0.9)) and 76.5% (IQR 69.3-80.0) of the respiration measurement was stable. No adverse skin effects were observed (median skin score of 3(3-4)). A similar HR and RR trend between the belt and CI was observed. Significance Dry electrodes incorporated in a non-adhesive belt can measure dEMG in preterm infants. The belt provided a HR and RR trend similar to CI. Future studies are required to investigate the non-inferiority of the belt as a cardiorespiratory monitor compared to CI.
Collapse
Affiliation(s)
- Anouk W J Scholten
- Department of neonatology, Emma Children's Hospital, AmsterdamUMC, Meibergdreef 9, Amsterdam, 1105 AZ, NETHERLANDS
| | - Ruud W van Leuteren
- Department of neonatology, Emma Children's Hospital, AmsterdamUMC, Meibergdreef 9, Amsterdam, 1105 AZ, NETHERLANDS
| | - Cornelia G de Waal
- Department of neonatology, Emma Children's Hospital, AmsterdamUMC, Meibergdreef 9, Amsterdam, 1105 AZ, NETHERLANDS
| | - Frans H de Jongh
- Department of neonatology, Emma Children's Hospital, AmsterdamUMC, Meibergdreef 9, Amsterdam, 1105 AZ, NETHERLANDS
| | - Anton H van Kaam
- Department of neonatology, Emma Children's Hospital, AmsterdamUMC, Meibergdreef 9, Amsterdam, Noord-Holland, 1105 AZ, NETHERLANDS
| | - G Jeroen Hutten
- Department of neonatology, Emma Children's Hospital, AmsterdamUMC, Meibergdreef 9, Amsterdam, 1105 AZ, NETHERLANDS
| |
Collapse
|
25
|
Murakami K, Tochinai R, Tachibana D, Isano Y, Matsuda R, Nakamura F, Kurotaki Y, Isoda Y, Yamane M, Sugita Y, Fukuda J, Ueno K, Miki N, Fuchiwaki O, Ota H. Direct Wiring of Liquid Metal on an Ultrasoft Substrate Using a Polyvinyl Alcohol Lift-off Method. ACS APPLIED MATERIALS & INTERFACES 2022; 14:7241-7251. [PMID: 35084813 DOI: 10.1021/acsami.1c20628] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/14/2023]
Abstract
In recent years, wiring and system construction on ultrasoft materials such as biological tissues and hydrogels have been proposed for advanced wearable devices, implantable devices, and soft robotics. Among the soft conductive materials, Ga-based liquid metals (LMs) are both biocompatible and ultrasoft, making them a good match for electrodes on the ultrasoft substrates. However, gels and tissues are softer and less wettable to the LMs than conventional soft substrates such as Ecoflex and polydimethylsiloxane. In this study, we demonstrated the transfer of LM paste composed of Ga-based LM and Ni nanoparticles onto ultrasoft substrates such as biological tissue and gels using sacrificial polyvinyl alcohol (PVA) films. The LM paste pattern fabricated on the PVA film adhered to the ultrasoft substrate along surface irregularities and was transferred without being destroyed by the PVA film before the PVA's dissolution in water. The minimum line width that could be wired was approximately 165 μm. Three-dimensional wiring, such as the helical structure on the gel fiber surface, is also possible. Application of this transfer method to tissues using LM paste wiring allowed the successful stimulation of the vagus nerve in rats. In addition, we succeeded in transferring a temperature measurement system fabricated on a PVA film onto the gel. The connection between the solid-state electrical element and the LM paste was stable and maintained the functionality of the temperature-sensing system. This fundamental study of wiring fabrication and system integration can contribute to the development of advanced electric devices based on ultrasoft substrates.
Collapse
Affiliation(s)
- Koki Murakami
- Department of Mechanical Engineering, Yokohama National University, 79-5, Tokiwadai, Hodogaya-ku, Yokohama, Kanagawa 240-8501, Japan
| | - Ryota Tochinai
- Graduate School of Agricultural and Life Sciences, The University of Tokyo, 1-1-1, Yayoi, Bunkyo-ku, Tokyo 113-8657, Japan
| | - Daiki Tachibana
- Department of Mechanical Engineering, Yokohama National University, 79-5, Tokiwadai, Hodogaya-ku, Yokohama, Kanagawa 240-8501, Japan
| | - Yuji Isano
- Department of Mechanical Engineering, Yokohama National University, 79-5, Tokiwadai, Hodogaya-ku, Yokohama, Kanagawa 240-8501, Japan
| | - Ryosuke Matsuda
- Department of Mechanical Engineering, Yokohama National University, 79-5, Tokiwadai, Hodogaya-ku, Yokohama, Kanagawa 240-8501, Japan
| | - Fumika Nakamura
- Department of Mechanical Engineering, Yokohama National University, 79-5, Tokiwadai, Hodogaya-ku, Yokohama, Kanagawa 240-8501, Japan
| | - Yuta Kurotaki
- Department of Mechanical Engineering, Yokohama National University, 79-5, Tokiwadai, Hodogaya-ku, Yokohama, Kanagawa 240-8501, Japan
| | - Yutaka Isoda
- Graduate School of System Integration, Yokohama National University, 79-5, Tokiwadai, Hodogaya-ku, Yokohama, Kanagawa 240-8501, Japan
| | - Monami Yamane
- Department of Chemistry and Life Science, Yokohama National University, 79-5 Tokiwadai, Hodogaya-ku, Yokohama, Kanagawa 240-8501, Japan
| | - Yuya Sugita
- Department of Chemistry and Life Science, Yokohama National University, 79-5 Tokiwadai, Hodogaya-ku, Yokohama, Kanagawa 240-8501, Japan
| | - Junji Fukuda
- Graduate School of Engineering, Yokohama National University, 79-5 Tokiwadai, Hodogaya-ku, Yokohama, Kanagawa 240-8501, Japan
| | - Kazuhide Ueno
- Graduate School of Engineering, Yokohama National University, 79-5 Tokiwadai, Hodogaya-ku, Yokohama, Kanagawa 240-8501, Japan
| | - Norihisa Miki
- Department of Mechanical Engineering, Keio University, 3-14-1, Hiyoshi, Kohoku-ku, Yokohama, Kanagawa 223-8522, Japan
| | - Ohmi Fuchiwaki
- Department of Mechanical Engineering, Yokohama National University, 79-5, Tokiwadai, Hodogaya-ku, Yokohama, Kanagawa 240-8501, Japan
- Graduate School of System Integration, Yokohama National University, 79-5, Tokiwadai, Hodogaya-ku, Yokohama, Kanagawa 240-8501, Japan
| | - Hiroki Ota
- Department of Mechanical Engineering, Yokohama National University, 79-5, Tokiwadai, Hodogaya-ku, Yokohama, Kanagawa 240-8501, Japan
- Graduate School of System Integration, Yokohama National University, 79-5, Tokiwadai, Hodogaya-ku, Yokohama, Kanagawa 240-8501, Japan
| |
Collapse
|
26
|
Oldroyd P, Malliaras GG. Achieving long-term stability of thin-film electrodes for neurostimulation. Acta Biomater 2022; 139:65-81. [PMID: 34020055 DOI: 10.1016/j.actbio.2021.05.004] [Citation(s) in RCA: 22] [Impact Index Per Article: 11.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/03/2021] [Revised: 05/06/2021] [Accepted: 05/06/2021] [Indexed: 12/17/2022]
Abstract
Implantable electrodes that can reliably measure brain activity and deliver an electrical stimulus to a target tissue are increasingly employed to treat various neurological diseases and neuropsychiatric disorders. Flexible thin-film electrodes have gained attention over the past few years to minimise invasiveness and damage upon implantation. Research has previously focused on optimising the electrode's electrical and mechanical properties; however, their chronic stability must be validated to translate electrodes from a research to a clinical application. Neurostimulation electrodes, which actively inject charge, have yet to reliably demonstrate continuous functionality for ten years or more in vivo, the accepted metric for clinical viability. Long-term stability can only be achieved if the focus switches to investigating how and why such devices fail. Unfortunately, there is a field-wide reluctance to investigate device stability and failures, which hinders device optimisation. This review surveys thin-film electrode designs with a focus on adhesion between electrode layers and the interactions with the surrounding environment. A comprehensive summary of the abiotic failure modes faced by such electrodes is presented, and to encourage investigation, systematic methods for analysing their origin are recommended. Finally, approaches to reducing the likelihood of device failure are offered. STATEMENT OF SIGNIFICANCE: Neural electrodes that can deliver an electrical stimulus to a target tissue are widely used to treat various neurological diseases. Essential to the function of these electrodes is the ability to safely stimulate the target tissue for extended periods (> 10 years); however, this has not yet been clinically achieved. The key to achieving long-term stability is an increased understanding of electrode interactions with the surrounding tissue and subsequent systematic analysis of their failure modes. This review highlights the need for a change in the approach to investigating electrode failure, and in doing so summarizes the common ways in which neural electrodes fail, methods for identifying them and approaches to preventing them.
Collapse
|
27
|
Taguchi K, Uemura T, Namba N, Petritz A, Araki T, Sugiyama M, Stadlober B, Sekitani T. Heterogeneous Functional Dielectric Patterns for Charge-Carrier Modulation in Ultraflexible Organic Integrated Circuits. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2021; 33:e2104446. [PMID: 34545628 DOI: 10.1002/adma.202104446] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/10/2021] [Revised: 08/11/2021] [Indexed: 06/13/2023]
Abstract
Flexible electronics have gained considerable attention for application in wearable devices. Organic transistors are potential candidates to develop flexible integrated circuits (ICs). A primary technique for maximizing their reliability, gain, and operation speed is the modulation of charge-carrier behavior in the respective transistors fabricated on the same substrate. In this work, heterogeneous functional dielectric patterns (HFDP) of ultrathin polymer gate dielectrics of poly((±)endo,exo-bicyclo[2.2.1]hept-ene-2,3-dicarboxylic acid, diphenylester) (PNDPE) are introduced. The HFDP that are obtained via the photo-Fries rearrangement by ultraviolet radiation in the homogeneous PNDPE provide a functional area for charge-carrier modulation. This leads to programmable threshold voltage control over a wide range (-1.5 to +0.2 V) in the transistors with a high patterning resolution, at 2 V operational voltage. The transistors also exhibit high operational stability over 140 days and under the bias-stress duration of 1800 s. With the HFDP, the performance metrics of ICs, for example, the noise margin and gain of the zero-VGS load inverters and the oscillation frequency of ring oscillators are improved to 80%, 1200, and 2.5 kHz, respectively, which are the highest among the previously reported zero-VGS -based organic circuits. The HFDP can be applied to much complex and ultraflexible ICs.
Collapse
Affiliation(s)
- Koki Taguchi
- SANKEN (The Institute of Scientific and Industrial Research), Osaka University, 8-1, Mihogaoka, Ibaraki, Osaka, 567-0047, Japan
- Advanced Photonics and Biosensing Open Innovation Laboratory, National Institute of Advanced Industrial Science and Technology (AIST), 2-1 Yamadaoka, Suita, Osaka, 565-0871, Japan
- Graduate School of Engineering, Osaka University, 2-1 Yamadaoka, Suita, Osaka, 565-0871, Japan
| | - Takafumi Uemura
- SANKEN (The Institute of Scientific and Industrial Research), Osaka University, 8-1, Mihogaoka, Ibaraki, Osaka, 567-0047, Japan
- Advanced Photonics and Biosensing Open Innovation Laboratory, National Institute of Advanced Industrial Science and Technology (AIST), 2-1 Yamadaoka, Suita, Osaka, 565-0871, Japan
| | - Naoko Namba
- SANKEN (The Institute of Scientific and Industrial Research), Osaka University, 8-1, Mihogaoka, Ibaraki, Osaka, 567-0047, Japan
- Advanced Photonics and Biosensing Open Innovation Laboratory, National Institute of Advanced Industrial Science and Technology (AIST), 2-1 Yamadaoka, Suita, Osaka, 565-0871, Japan
| | - Andreas Petritz
- JOANNEUM RESEARCH Forschungsgesellschaft mbH, MATERIALS-Institute for Surface Technologies and Photonics, Franz-Pichler-Straße 30, Weiz, 8160, Austria
| | - Teppei Araki
- SANKEN (The Institute of Scientific and Industrial Research), Osaka University, 8-1, Mihogaoka, Ibaraki, Osaka, 567-0047, Japan
- Advanced Photonics and Biosensing Open Innovation Laboratory, National Institute of Advanced Industrial Science and Technology (AIST), 2-1 Yamadaoka, Suita, Osaka, 565-0871, Japan
- Graduate School of Engineering, Osaka University, 2-1 Yamadaoka, Suita, Osaka, 565-0871, Japan
| | - Masahiro Sugiyama
- SANKEN (The Institute of Scientific and Industrial Research), Osaka University, 8-1, Mihogaoka, Ibaraki, Osaka, 567-0047, Japan
- Advanced Photonics and Biosensing Open Innovation Laboratory, National Institute of Advanced Industrial Science and Technology (AIST), 2-1 Yamadaoka, Suita, Osaka, 565-0871, Japan
- Graduate School of Engineering, Osaka University, 2-1 Yamadaoka, Suita, Osaka, 565-0871, Japan
| | - Barbara Stadlober
- JOANNEUM RESEARCH Forschungsgesellschaft mbH, MATERIALS-Institute for Surface Technologies and Photonics, Franz-Pichler-Straße 30, Weiz, 8160, Austria
| | - Tsuyoshi Sekitani
- SANKEN (The Institute of Scientific and Industrial Research), Osaka University, 8-1, Mihogaoka, Ibaraki, Osaka, 567-0047, Japan
- Advanced Photonics and Biosensing Open Innovation Laboratory, National Institute of Advanced Industrial Science and Technology (AIST), 2-1 Yamadaoka, Suita, Osaka, 565-0871, Japan
- Graduate School of Engineering, Osaka University, 2-1 Yamadaoka, Suita, Osaka, 565-0871, Japan
| |
Collapse
|
28
|
Lee C, Choi J, Park H, Lee C, Kim CH, Yoo H, Im SG. Systematic Control of Negative Transconductance in Organic Heterojunction Transistor for High-Performance, Low-Power Flexible Ternary Logic Circuits. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2021; 17:e2103365. [PMID: 34636162 DOI: 10.1002/smll.202103365] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/28/2021] [Indexed: 06/13/2023]
Abstract
Organic multi-valued logic (MVL) circuits can substantially improve the data processing efficiency in highly advanced wearable electronics. Organic ternary logic circuits can be implemented by utilizing the negative transconductance (NTC) of heterojunction transistors (H-TRs). To achieve high-performance organic ternary logic circuits, the range of NTC in H-TRs must be optimized in advance to ensure the well-defined intermediate logic state in ternary logic inverters (T-inverters). Herein, a simple and efficient strategy, which enables the systematic control of the range and position of NTC in H-TRs is presented. Each thickness of p-/n-type semiconductor in H-TRs is adjusted to control the channel conductivity. Furthermore, asymmetric source/drain (S/D) electrode structure is newly developed for H-TRs, which can adjust the amount of hole and electron injection, independently. Based on the semiconductor thickness variation and asymmetric S/D electrodes, the T-inverter exhibits full-swing operation with three distinguishable logic states, resulting in unprecedentedly high static noise margin (≈48% of the ideal value). Moreover, a flexible T-inverter with an ultrathin polymer dielectric is demonstrated, whose operating voltage is less than 8 V. The proposed strategy is fully compatible with the conventional integrated circuit design, which is highly desirable for broad applicability and scalability for various types of T-inverter production.
Collapse
Affiliation(s)
- Chungryeol Lee
- Department of Chemical and Biomolecular Engineering, Korea Advanced Institute of Science and Technology, 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
| | - Junhwan Choi
- Department of Chemical and Biomolecular Engineering, Korea Advanced Institute of Science and Technology, 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
| | - Hongkeun Park
- Department of Chemical and Biomolecular Engineering, Korea Advanced Institute of Science and Technology, 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
| | - Changhyeon Lee
- Department of Chemical and Biomolecular Engineering, Korea Advanced Institute of Science and Technology, 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
| | - Chang-Hyun Kim
- Department of Electronic Engineering, Gachon University, 1342 Seongnam-daero, Seongnam, 13120, Republic of Korea
| | - Hocheon Yoo
- Department of Electronic Engineering, Gachon University, 1342 Seongnam-daero, Seongnam, 13120, Republic of Korea
| | - Sung Gap Im
- Department of Chemical and Biomolecular Engineering, Korea Advanced Institute of Science and Technology, 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
- KAIST Institute for the NanoCentury (KINC), Korea Advanced Institute of Science and Technology, Daejeon, 34141, Republic of Korea
| |
Collapse
|
29
|
Li H, Gao G, Xu Z, Tang D, Chen T. Recent Progress in Bionic Skin Based on Conductive Polymer Gels. Macromol Rapid Commun 2021; 42:e2100480. [PMID: 34505726 DOI: 10.1002/marc.202100480] [Citation(s) in RCA: 18] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/23/2021] [Revised: 08/30/2021] [Indexed: 12/12/2022]
Abstract
Bionic skin sensors based on conductive polymer gels have garnered interest for their potential applications in human-computer interaction, soft robotics, biomedical systems, sports, and healthcare, because of their intrinsic flexibility and stretchability embedded at the material level, and other such as self-healing, adhesion, high, and low temperature tolerance properties that can be tuned through macromolecular design. Here, important advances in polymer gel-based flexible sensors over recent years are summarized, from material design, sensor fabrication to system-level applications. This review focuses on the representative strategies of design and preparing of conductive polymer gels, and adjusting their conductivity, mechanics, and other properties such as self-healing and adhesiveness by controlling the macromolecular network structures. The state-of-art of present flexible pressure and strain sensors, temperature sensors, position sensors, and multifunctional sensors based on capacitance, voltage, and resistance sensing technologies, are also systematically reviewed. Finally, perspectives on issues regarding further advances and challenges are provided.
Collapse
Affiliation(s)
- Huijing Li
- Key Laboratory of Marine Materials and Related Technologies, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo, 315201, China.,School of Chemical Science, University of Chinese Academy of Sciences, 9A Yuquan Road, Beijing, 100049, China
| | - Guorong Gao
- Key Laboratory of Marine Materials and Related Technologies, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo, 315201, China.,School of Chemical Science, University of Chinese Academy of Sciences, 9A Yuquan Road, Beijing, 100049, China
| | - Zhenyu Xu
- Key Laboratory of Marine Materials and Related Technologies, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo, 315201, China.,School of Chemical Science, University of Chinese Academy of Sciences, 9A Yuquan Road, Beijing, 100049, China
| | - Diane Tang
- YK Pao School, No 1800, Lane 900 North Sanxin Road, Songjiang District, Shanghai, 201620, China
| | - Tao Chen
- Key Laboratory of Marine Materials and Related Technologies, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo, 315201, China.,School of Chemical Science, University of Chinese Academy of Sciences, 9A Yuquan Road, Beijing, 100049, China
| |
Collapse
|
30
|
Zhu M, Wang H, Li S, Liang X, Zhang M, Dai X, Zhang Y. Flexible Electrodes for In Vivo and In Vitro Electrophysiological Signal Recording. Adv Healthc Mater 2021; 10:e2100646. [PMID: 34050635 DOI: 10.1002/adhm.202100646] [Citation(s) in RCA: 33] [Impact Index Per Article: 11.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/03/2021] [Revised: 05/10/2021] [Indexed: 12/19/2022]
Abstract
A variety of electrophysiological signals (electrocardiography, electromyography, electroencephalography, etc.) are generated during the physiological activities of human bodies, which can be collected by electrodes and thus provide critical insights into health status or facilitate fundamental scientific research. The long-term stable and high-quality recording of electrophysiological signals is the premise for their further applications, leading to demands for flexible electrodes with similar mechanical modulus and minimized irritation to human bodies. This review summarizes the latest advances in flexible electrodes for the acquisition of various electrophysiological signals. First, the concept of electrophysiological signals and the characteristics of different subcategory signals are introduced. Second, the invasive and noninvasive methods are reviewed for electrophysiological signal recording with a highlight on the design of flexible electrodes, followed by a discussion on their material selection. Subsequently, the applications of the electrophysiological signal acquisition in pathological diagnosis and restoration of body functions are discussed, showing the advantages of flexible electrodes. Finally, the main challenges and opportunities in this field are discussed. It is believed that the further exploration of materials for flexible electrodes and the combination of multidisciplinary technologies will boost the applications of flexible electrodes for medical diagnosis and human-machine interface.
Collapse
Affiliation(s)
- Mengjia Zhu
- Key Laboratory of Organic Optoelectronics and Molecular Engineering of the Ministry of Education Department of Chemistry Tsinghua University Beijing 100084 P. R. China
| | - Huimin Wang
- Key Laboratory of Organic Optoelectronics and Molecular Engineering of the Ministry of Education Department of Chemistry Tsinghua University Beijing 100084 P. R. China
| | - Shuo Li
- Key Laboratory of Organic Optoelectronics and Molecular Engineering of the Ministry of Education Department of Chemistry Tsinghua University Beijing 100084 P. R. China
| | - Xiaoping Liang
- Key Laboratory of Organic Optoelectronics and Molecular Engineering of the Ministry of Education Department of Chemistry Tsinghua University Beijing 100084 P. R. China
| | - Mingchao Zhang
- Key Laboratory of Organic Optoelectronics and Molecular Engineering of the Ministry of Education Department of Chemistry Tsinghua University Beijing 100084 P. R. China
| | - Xiaochuan Dai
- Department of Biomedical Engineering School of Medicine Tsinghua University Beijing 100084 P. R. China
| | - Yingying Zhang
- Key Laboratory of Organic Optoelectronics and Molecular Engineering of the Ministry of Education Department of Chemistry Tsinghua University Beijing 100084 P. R. China
| |
Collapse
|
31
|
Liang K, Li D, Ren H, Zhao M, Wang H, Ding M, Xu G, Zhao X, Long S, Zhu S, Sheng P, Li W, Lin X, Zhu B. Fully Printed High-Performance n-Type Metal Oxide Thin-Film Transistors Utilizing Coffee-Ring Effect. NANO-MICRO LETTERS 2021; 13:164. [PMID: 34342729 PMCID: PMC8333237 DOI: 10.1007/s40820-021-00694-4] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 05/25/2021] [Accepted: 07/13/2021] [Indexed: 06/13/2023]
Abstract
Metal oxide thin-films transistors (TFTs) produced from solution-based printing techniques can lead to large-area electronics with low cost. However, the performance of current printed devices is inferior to those from vacuum-based methods due to poor film uniformity induced by the "coffee-ring" effect. Here, we report a novel approach to print high-performance indium tin oxide (ITO)-based TFTs and logic inverters by taking advantage of such notorious effect. ITO has high electrical conductivity and is generally used as an electrode material. However, by reducing the film thickness down to nanometers scale, the carrier concentration of ITO can be effectively reduced to enable new applications as active channels in transistors. The ultrathin (~10-nm-thick) ITO film in the center of the coffee-ring worked as semiconducting channels, while the thick ITO ridges (>18-nm-thick) served as the contact electrodes. The fully inkjet-printed ITO TFTs exhibited a high saturation mobility of 34.9 cm2 V-1 s-1 and a low subthreshold swing of 105 mV dec-1. In addition, the devices exhibited excellent electrical stability under positive bias illumination stress (PBIS, ΔVth = 0.31 V) and negative bias illuminaiton stress (NBIS, ΔVth = -0.29 V) after 10,000 s voltage bias tests. More remarkably, fully printed n-type metal-oxide-semiconductor (NMOS) inverter based on ITO TFTs exhibited an extremely high gain of 181 at a low-supply voltage of 3 V, promising for advanced electronics applications.
Collapse
Affiliation(s)
- Kun Liang
- Key Laboratory of 3D Micro/Nano Fabrication and Characterization of Zhejiang Province, School of Engineering, Westlake University, Hangzhou, 310024, China
- Zhejiang University, Hangzhou, 310027, China
| | - Dingwei Li
- Key Laboratory of 3D Micro/Nano Fabrication and Characterization of Zhejiang Province, School of Engineering, Westlake University, Hangzhou, 310024, China
- Zhejiang University, Hangzhou, 310027, China
| | - Huihui Ren
- Key Laboratory of 3D Micro/Nano Fabrication and Characterization of Zhejiang Province, School of Engineering, Westlake University, Hangzhou, 310024, China
- Zhejiang University, Hangzhou, 310027, China
| | - Momo Zhao
- Key Laboratory of 3D Micro/Nano Fabrication and Characterization of Zhejiang Province, School of Engineering, Westlake University, Hangzhou, 310024, China
- Key Laboratory of Wide Band Gap Semiconductor Technology, School of Microelectronics, Xidian University, Xian, 710071, China
| | - Hong Wang
- Key Laboratory of Wide Band Gap Semiconductor Technology, School of Microelectronics, Xidian University, Xian, 710071, China
| | - Mengfan Ding
- School of Microelectronics, University of Science and Technology of China, Hefei, 230026, China
| | - Guangwei Xu
- School of Microelectronics, University of Science and Technology of China, Hefei, 230026, China
| | - Xiaolong Zhao
- School of Microelectronics, University of Science and Technology of China, Hefei, 230026, China
| | - Shibing Long
- School of Microelectronics, University of Science and Technology of China, Hefei, 230026, China
| | - Siyuan Zhu
- Instrumentation and Service Center for Physical Sciences, Westlake University, Hangzhou, 310024, China
| | - Pei Sheng
- Instrumentation and Service Center for Physical Sciences, Westlake University, Hangzhou, 310024, China
| | - Wenbin Li
- Key Laboratory of 3D Micro/Nano Fabrication and Characterization of Zhejiang Province, School of Engineering, Westlake University, Hangzhou, 310024, China
- Institute of Advanced Technology, Westlake Institute for Advanced Study, Hangzhou, 310024, China
| | - Xiao Lin
- School of Science, Westlake University, Hangzhou, 310024, China
| | - Bowen Zhu
- Key Laboratory of 3D Micro/Nano Fabrication and Characterization of Zhejiang Province, School of Engineering, Westlake University, Hangzhou, 310024, China.
- Institute of Advanced Technology, Westlake Institute for Advanced Study, Hangzhou, 310024, China.
| |
Collapse
|
32
|
Gaviria Rojas WA, Beck ME, Sangwan VK, Guo S, Hersam MC. Ohmic-Contact-Gated Carbon Nanotube Transistors for High-Performance Analog Amplifiers. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2021; 33:e2100994. [PMID: 34270835 DOI: 10.1002/adma.202100994] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/05/2021] [Revised: 04/14/2021] [Indexed: 06/13/2023]
Abstract
The growing demand for ubiquitous data collection has driven the development of sensing technologies with local data processing. As a result, solution-processed semiconductors are widely employed due to their compatibility with low-cost additive manufacturing on a wide range of substrates. However, to fully realize their potential in sensing applications, high-performance scalable analog amplifiers must be realized. Here, ohmic-contact-gated transistors (OCGTs) based on solution-processed semiconducting single-walled carbon nanotubes are introduced to address this unmet need. This new device concept enables output current saturation in the short-channel limit without compromising output current drive. The resulting OCGTs are used in common-source amplifiers to achieve the highest width-normalized output current (≈30 µA µm-1 ) and length-scaled signal gain (≈230 µm-1 ) to date for solution-processed semiconductors. The utility of these amplifiers for emerging sensing technologies is demonstrated by the amplification of complex millivolt-scale analog biological signals including the outputs of electromyography, photoplethysmogram, and accelerometer sensors. Since the OCGT design is compatible with other solution-processed semiconducting materials, this work establishes a general route to high-performance, solution-processed analog electronics.
Collapse
Affiliation(s)
- William A Gaviria Rojas
- Department of Materials Science and Engineering, Northwestern University, Evanston, IL, 60208, USA
| | - Megan E Beck
- Department of Materials Science and Engineering, Northwestern University, Evanston, IL, 60208, USA
| | - Vinod K Sangwan
- Department of Materials Science and Engineering, Northwestern University, Evanston, IL, 60208, USA
| | - Silu Guo
- Department of Materials Science and Engineering, Northwestern University, Evanston, IL, 60208, USA
| | - Mark C Hersam
- Department of Materials Science and Engineering, Northwestern University, Evanston, IL, 60208, USA
- Department of Electrical and Computer Engineering, Northwestern University, Evanston, IL, 60208, USA
| |
Collapse
|
33
|
Ge J, Zhu M, Eisner E, Yin Y, Dong H, Karnaushenko DD, Karnaushenko D, Zhu F, Ma L, Schmidt OG. Imperceptible Supercapacitors with High Area-Specific Capacitance. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2021; 17:e2101704. [PMID: 33977641 DOI: 10.1002/smll.202101704] [Citation(s) in RCA: 10] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/07/2021] [Indexed: 06/12/2023]
Abstract
Imperceptible electronics will make next-generation healthcare and biomedical systems thinner, lighter, and more flexible. While other components are thoroughly investigated, imperceptible energy storage devices lag behind because the decrease of thickness impairs the area-specific energy density. Imperceptible supercapacitors with high area-specific capacitance based on reduced graphene oxide/polyaniline (RGO/PANI) composite electrodes and polyvinyl alcohol (PVA)/H2 SO4 gel electrolyte are reported. Two strategies to realize a supercapacitor with a total device thickness of 5 µm-including substrate, electrode, and electrolyte-and an area-specific capacitance of 36 mF cm-2 simultaneously are implemented. First, the void volume of the RGO/PANI electrodes through mechanical compression is reduced, which decreases the thickness by 83% while retaining 89% of the capacitance. Second, the PVA-to-H2 SO4 mass ratio is decreased to 1:4.5, which improves the ion conductivity by 5000% compared to the commonly used PVA/H2 SO4 gel. Both advantages enable a 2 µm-thick gel electrolyte for planar interdigital supercapacitors. The impressive electromechanical stability of the imperceptible supercapacitors by wrinkling the substrate to produce folds with radii of 6 µm or less is demonstrated. The supercapacitors will be meaningful energy storage modules for future self-powered imperceptible electronics.
Collapse
Affiliation(s)
- Jin Ge
- Institute for Integrative Nanosciences, Leibniz IFW Dresden, 01069, Dresden, Germany
| | - Minshen Zhu
- Institute for Integrative Nanosciences, Leibniz IFW Dresden, 01069, Dresden, Germany
| | - Eric Eisner
- Institute for Integrative Nanosciences, Leibniz IFW Dresden, 01069, Dresden, Germany
| | - Yin Yin
- Institute for Integrative Nanosciences, Leibniz IFW Dresden, 01069, Dresden, Germany
| | - Haiyun Dong
- Institute for Integrative Nanosciences, Leibniz IFW Dresden, 01069, Dresden, Germany
| | | | - Daniil Karnaushenko
- Institute for Integrative Nanosciences, Leibniz IFW Dresden, 01069, Dresden, Germany
| | - Feng Zhu
- Material Systems for Nanoelectronics, TU Chemnitz, 09107, Chemnitz, Germany
- Center for Materials, Architectures, and Integration of Nanomembranes (MAIN), TU Chemnitz, 09126, Chemnitz, Germany
| | - Libo Ma
- Institute for Integrative Nanosciences, Leibniz IFW Dresden, 01069, Dresden, Germany
| | - Oliver G Schmidt
- Institute for Integrative Nanosciences, Leibniz IFW Dresden, 01069, Dresden, Germany
- Material Systems for Nanoelectronics, TU Chemnitz, 09107, Chemnitz, Germany
- Center for Materials, Architectures, and Integration of Nanomembranes (MAIN), TU Chemnitz, 09126, Chemnitz, Germany
- School of Science, TU Dresden, 01062, Dresden, Germany
| |
Collapse
|
34
|
Han K, Bai Q, Wu W, Sun N, Cui N, Lu T. Gelatin-based adhesive hydrogel with self-healing, hemostasis, and electrical conductivity. Int J Biol Macromol 2021; 183:2142-2151. [PMID: 34048838 DOI: 10.1016/j.ijbiomac.2021.05.147] [Citation(s) in RCA: 55] [Impact Index Per Article: 18.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/18/2021] [Revised: 05/12/2021] [Accepted: 05/21/2021] [Indexed: 02/07/2023]
Abstract
As a kind of natural protein derived material, gelatin has been widely used in the preparation of medical hydrogels due to its good biocompatibility, non-immunogenicity and the ability of promoting cell adhesion. Functionalization of gelatin-based hydrogels is a hot topic in research and its clinic application. Herein, a novel gelatin-based adhesive hydrogel was prepared via mussel-inspired chemistry. Gelatin was firstly functionalized by dopamine to form dopamine grafted gelatin (GelDA). After the mixture with 1,4-phenylenebisboronic acid and graphene oxide (GO), the GelDA/GO hydrogels were obtained by H2O2/HRP (horseradish peroxidase) catalytic system. Based on the self-healing and tissue adhesion of the hydrogels, the hemostatic property has been exhibited in the rat hepatic hemorrhage model. Additionally, the incorporation of GO endowed conductivity and enhanced the mechanical property of GelDA/GO hydrogels. The electromyography (EMG) signals of finger movement were successfully monitored by using hydrogel as the adhesive electrodes of EMG monitor. L929 cell experiments showed that the hydrogels had good cytocompatibility. The results indicated the potential application of GelDA/GO hydrogels in tissue adhesives, wound dressings, and wearable devices.
Collapse
Affiliation(s)
- Kai Han
- Key Laboratory for Space Bioscience and Biotechnology, School of Life Sciences, Northwestern Polytechnical University, No.127 Youyi West Road, Xi'an, Shaanxi 710072, People's Republic of China
| | - Que Bai
- Key Laboratory for Space Bioscience and Biotechnology, School of Life Sciences, Northwestern Polytechnical University, No.127 Youyi West Road, Xi'an, Shaanxi 710072, People's Republic of China
| | - Wendong Wu
- Key Laboratory for Space Bioscience and Biotechnology, School of Life Sciences, Northwestern Polytechnical University, No.127 Youyi West Road, Xi'an, Shaanxi 710072, People's Republic of China
| | - Na Sun
- Key Laboratory for Space Bioscience and Biotechnology, School of Life Sciences, Northwestern Polytechnical University, No.127 Youyi West Road, Xi'an, Shaanxi 710072, People's Republic of China
| | - Ning Cui
- Key Laboratory for Space Bioscience and Biotechnology, School of Life Sciences, Northwestern Polytechnical University, No.127 Youyi West Road, Xi'an, Shaanxi 710072, People's Republic of China.
| | - Tingli Lu
- Key Laboratory for Space Bioscience and Biotechnology, School of Life Sciences, Northwestern Polytechnical University, No.127 Youyi West Road, Xi'an, Shaanxi 710072, People's Republic of China.
| |
Collapse
|
35
|
Hayata Y, Nakagawa H, Kurosaki S, Kawamura S, Matsushita Y, Hayakawa Y, Suzuki N, Hata M, Tsuboi M, Kinoshita H, Miyabayashi K, Mizutani H, Nakagomi R, Ikenoue T, Hirata Y, Arita J, Hasegawa K, Tateishi K, Koike K. Axin2 + Peribiliary Glands in the Periampullary Region Generate Biliary Epithelial Stem Cells That Give Rise to Ampullary Carcinoma. Gastroenterology 2021; 160:2133-2148.e6. [PMID: 33465373 DOI: 10.1053/j.gastro.2021.01.028] [Citation(s) in RCA: 15] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 10/09/2020] [Revised: 01/11/2021] [Accepted: 01/11/2021] [Indexed: 12/17/2022]
Abstract
BACKGROUND & AIMS Peribiliary glands (PBGs), clusters of epithelial cells residing in the submucosal compartment of extrahepatic bile ducts, have been suggested as biliary epithelial stem/progenitor cell niche; however, evidence to support this claim is limited because of a lack of PBG-specific markers. We therefore sought to identify PBG-specific markers to investigate the potential role of PBGs as stem/progenitor cell niches, as well as an origin of cancer. METHODS We examined the expression pattern of the Wnt target gene Axin2 in extrahepatic bile ducts. We then applied lineage tracing to investigate whether Axin2-expressing cells from PBGs contribute to biliary regeneration and carcinogenesis using Axin2-CreERT mice. RESULTS Wnt signaling activation, marked by Axin2, was limited to PBGs located in the periampullary region. Lineage tracing showed that Axin2-expressing periampullary PBG cells are capable of self-renewal and supplying new biliary epithelial cells (BECs) to the luminal surface. Additionally, the expression pattern of Axin2 and the mature ductal cell marker CK19 were mutually exclusive in periampullary region, and fate tracing of CK19+ luminal surface BECs showed gradual replacement by CK19- cells, further supporting the continuous replenishment of new BECs from PBGs to the luminal surface. We also found that Wnt signal enhancer R-spondin3 secreted from Myh11-expressing stromal cells, corresponding to human sphincter of Oddi, maintained the periampullary Wnt signal-activating niche. Notably, introduction of PTEN deletion into Axin2+ PBG cells, but not CK19+ luminal surface BECs, induced ampullary carcinoma whose development was suppressed by Wnt inhibitor. CONCLUSION A specific cell population receiving Wnt-activating signal in periampullary PBGs functions as biliary epithelial stem/progenitor cells and also the cellular origin of ampullary carcinoma.
Collapse
Affiliation(s)
- Yuki Hayata
- Department of Gastroenterology, The University of Tokyo, Tokyo, Japan
| | - Hayato Nakagawa
- Department of Gastroenterology, The University of Tokyo, Tokyo, Japan.
| | | | - Satoshi Kawamura
- Department of Gastroenterology, The University of Tokyo, Tokyo, Japan
| | - Yuki Matsushita
- Department of Gastroenterology, The University of Tokyo, Tokyo, Japan
| | - Yoku Hayakawa
- Department of Gastroenterology, The University of Tokyo, Tokyo, Japan
| | - Nobumi Suzuki
- Department of Gastroenterology, The University of Tokyo, Tokyo, Japan
| | - Masahiro Hata
- Department of Gastroenterology, The University of Tokyo, Tokyo, Japan
| | - Mayo Tsuboi
- Department of Gastroenterology, The University of Tokyo, Tokyo, Japan
| | - Hiroto Kinoshita
- Department of Gastroenterology, The University of Tokyo, Tokyo, Japan; Division of Gastroenterology, Institute for Adult Diseases, Asahi Life Foundation, Chuo-ku, Tokyo, Japan
| | - Koji Miyabayashi
- Department of Gastroenterology, The University of Tokyo, Tokyo, Japan
| | - Hiroya Mizutani
- Department of Gastroenterology, The University of Tokyo, Tokyo, Japan
| | - Ryo Nakagomi
- Department of Gastroenterology, The University of Tokyo, Tokyo, Japan
| | - Tsuneo Ikenoue
- Division of Clinical Genome Research, Institute of Medical Science, The University of Tokyo, Tokyo, Japan
| | - Yoshihiro Hirata
- Division of Advanced Genome Medicine, The Institute of Medical Science, The University of Tokyo, Tokyo, Japan
| | - Junichi Arita
- Hepato-Biliary-Pancreatic Surgery Division, Department of Surgery, The University of Tokyo, Tokyo, Japan
| | - Kiyoshi Hasegawa
- Hepato-Biliary-Pancreatic Surgery Division, Department of Surgery, The University of Tokyo, Tokyo, Japan
| | - Keisuke Tateishi
- Department of Gastroenterology, The University of Tokyo, Tokyo, Japan
| | - Kazuhiko Koike
- Department of Gastroenterology, The University of Tokyo, Tokyo, Japan
| |
Collapse
|
36
|
Luo Z, Peng B, Zeng J, Yu Z, Zhao Y, Xie J, Lan R, Ma Z, Pan L, Cao K, Lu Y, He D, Ning H, Meng W, Yang Y, Chen X, Li W, Wang J, Pan D, Tu X, Huo W, Huang X, Shi D, Li L, Liu M, Shi Y, Feng X, Chan PKL, Wang X. Sub-thermionic, ultra-high-gain organic transistors and circuits. Nat Commun 2021; 12:1928. [PMID: 33772009 PMCID: PMC7997979 DOI: 10.1038/s41467-021-22192-2] [Citation(s) in RCA: 31] [Impact Index Per Article: 10.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/13/2020] [Accepted: 02/23/2021] [Indexed: 02/02/2023] Open
Abstract
The development of organic thin-film transistors (OTFTs) with low power consumption and high gain will advance many flexible electronics. Here, by combining solution-processed monolayer organic crystal, ferroelectric HfZrOx gating and van der Waals fabrication, we realize flexible OTFTs that simultaneously deliver high transconductance and sub-60 mV/dec switching, under one-volt operating voltage. The overall optimization of transconductance, subthreshold swing and output resistance leads to transistor intrinsic gain and amplifier voltage gain over 5.3 × 104 and 1.1 × 104, respectively, which outperform existing technologies using organics, oxides and low-dimensional nanomaterials. We further demonstrate battery-powered, integrated wearable electrocardiogram (ECG) and pulse sensors that can amplify human physiological signal by 900 times with high fidelity. The sensors are capable of detecting weak ECG waves (undetectable even by clinical equipment) and diagnosing arrhythmia and atrial fibrillation. Our sub-thermionic OTFT is promising for battery/wireless powered yet performance demanding applications such as electronic skins and radio-frequency identification tags, among many others. Exploiting negative capacitance effects in organic thin-film transistors (OTFTs) is advantageous for enhancing device performance. Here, the authors report solution-processed sub-thermionic OTFTs and circuits with ferroelectric hafnium oxides that show ultra-low power and ultra-high gain.
Collapse
Affiliation(s)
- Zhongzhong Luo
- National Laboratory of Solid-State Microstructures, School of Electronic Science and Engineering and Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing, 210093, China
| | - Boyu Peng
- Department of Mechanical Engineering, The University of Hongkong, Pok Fu Lam Road, Hong Kong, China.,MOE Key Laboratory of Macromolecular Synthesis and Functionalization, Department of Polymer Science and Engineering, Zhejiang University, Hangzhou, 310027, China
| | - Junpeng Zeng
- National Laboratory of Solid-State Microstructures, School of Electronic Science and Engineering and Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing, 210093, China
| | - Zhihao Yu
- National Laboratory of Solid-State Microstructures, School of Electronic Science and Engineering and Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing, 210093, China.,College of Electronic and Optical Engineering, Nanjing University of Posts and Telecommunications, Nanjing, 210023, China
| | - Ying Zhao
- Key Laboratory of Microelectronics Devices and Integrated Technology, Institute of Microelectronics, Chinese Academy of Sciences, Beijing, 100029, China
| | - Jun Xie
- Department of Cardiology, Nanjing Drum Tower Hospital, The Affiliated Hospital of Nanjing University Medical School, Nanjing, 210093, China
| | - Rongfang Lan
- Department of Cardiology, Nanjing Drum Tower Hospital, The Affiliated Hospital of Nanjing University Medical School, Nanjing, 210093, China
| | - Zhong Ma
- National Laboratory of Solid-State Microstructures, School of Electronic Science and Engineering and Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing, 210093, China
| | - Lijia Pan
- National Laboratory of Solid-State Microstructures, School of Electronic Science and Engineering and Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing, 210093, China
| | - Ke Cao
- Department of Mechanical Engineering, City University of Hong Kong, Kowloon, Hong Kong, China
| | - Yang Lu
- Department of Mechanical Engineering, City University of Hong Kong, Kowloon, Hong Kong, China
| | - Daowei He
- National Laboratory of Solid-State Microstructures, School of Electronic Science and Engineering and Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing, 210093, China
| | - Hongkai Ning
- National Laboratory of Solid-State Microstructures, School of Electronic Science and Engineering and Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing, 210093, China
| | - Wanqing Meng
- National Laboratory of Solid-State Microstructures, School of Electronic Science and Engineering and Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing, 210093, China
| | - Yang Yang
- National Laboratory of Solid-State Microstructures, School of Electronic Science and Engineering and Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing, 210093, China
| | - Xiaoqing Chen
- National Laboratory of Solid-State Microstructures, School of Electronic Science and Engineering and Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing, 210093, China
| | - Weisheng Li
- National Laboratory of Solid-State Microstructures, School of Electronic Science and Engineering and Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing, 210093, China
| | - Jiawei Wang
- Key Laboratory of Microelectronics Devices and Integrated Technology, Institute of Microelectronics, Chinese Academy of Sciences, Beijing, 100029, China
| | - Danfeng Pan
- National Laboratory of Solid-State Microstructures, School of Electronic Science and Engineering and Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing, 210093, China.,Microfabrication and Integration Technology Center, Nanjing University, Nanjing, 210093, China
| | - Xuecou Tu
- National Laboratory of Solid-State Microstructures, School of Electronic Science and Engineering and Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing, 210093, China.,Microfabrication and Integration Technology Center, Nanjing University, Nanjing, 210093, China
| | - Wenxing Huo
- Department of Biomedical Engineering, Tianjin University, Tianjin, 300072, China
| | - Xian Huang
- Department of Biomedical Engineering, Tianjin University, Tianjin, 300072, China
| | - Dongquan Shi
- Department of Sports Medicine and Adult Reconstructive Surgery, Nanjing Drum Tower Hospital, The Affiliated Hospital of Nanjing University Medical School, Nanjing, 210093, China
| | - Ling Li
- Key Laboratory of Microelectronics Devices and Integrated Technology, Institute of Microelectronics, Chinese Academy of Sciences, Beijing, 100029, China
| | - Ming Liu
- Key Laboratory of Microelectronics Devices and Integrated Technology, Institute of Microelectronics, Chinese Academy of Sciences, Beijing, 100029, China
| | - Yi Shi
- National Laboratory of Solid-State Microstructures, School of Electronic Science and Engineering and Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing, 210093, China
| | - Xue Feng
- AML, Department of Engineering Mechanics, Center for Flexible Electronics Technology, Tsinghua University, Beijing, 100084, China
| | - Paddy K L Chan
- Department of Mechanical Engineering, The University of Hongkong, Pok Fu Lam Road, Hong Kong, China. .,Advanced Biomedical Instrumentation Centre, Hong Kong Science Park, Shatin, New Territories, Hong Kong, China.
| | - Xinran Wang
- National Laboratory of Solid-State Microstructures, School of Electronic Science and Engineering and Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing, 210093, China.
| |
Collapse
|
37
|
Goto H, Komae H, Sekine H, Homma J, Lee S, Yokota T, Matsuura K, Someya T, Ono M, Shimizu T. Continuous measurement of surface electrical potentials from transplanted cardiomyocyte tissue derived from human-induced pluripotent stem cells under physiological conditions in vivo. Heart Vessels 2021; 36:899-909. [PMID: 33683408 DOI: 10.1007/s00380-021-01824-z] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 12/14/2020] [Accepted: 02/26/2021] [Indexed: 10/22/2022]
Abstract
Recording the electrical potentials of bioengineered cardiac tissue after transplantation would help to monitor the maturation of the tissue and detect adverse events such as arrhythmia. However, a few studies have reported the measurement of myocardial tissue potentials in vivo under physiological conditions. In this study, human-induced pluripotent stem cell-derived cardiomyocyte (hiPSCM) sheets were stacked and ectopically transplanted into the subcutaneous tissue of rats for culture in vivo. Three months after transplantation, a flexible nanomesh sensor was implanted onto the hiPSCM tissue to record its surface electrical potentials under physiological conditions, i.e., without the need for anesthetic agents that might adversely affect cardiomyocyte function. The nanomesh sensor was able to record electrical potentials in non-sedated, ambulating animals for up to 48 h. When compared with recordings made with conventional needle electrodes in anesthetized animals, the waveforms obtained with the nanomesh sensor showed less dispersion of waveform interval and waveform duration. However, waveform amplitude tended to show greater dispersion for the nanomesh sensor than for the needle electrodes, possibly due to motion artifacts produced by movements of the animal or local tissue changes in response to surgical implantation of the sensor. The implantable nanomesh sensor utilized in this study potentially could be used for long-term monitoring of bioengineered myocardial tissue in vivo under physiological conditions.
Collapse
Affiliation(s)
- Hiroshi Goto
- Department of Cardiac Surgery, The University of Tokyo Hospital, 7-3-1 Hongo, Bunkyo-ku, Tokyo, 113-8655, Japan.,Institute of Advanced Biomedical Engineering and Science, TWIns, Tokyo Women's Medical University, 8-1 Kawada-cho, Shinjuku-ku, Tokyo, 162-8666, Japan
| | - Hyoe Komae
- Department of Cardiac Surgery, The University of Tokyo Hospital, 7-3-1 Hongo, Bunkyo-ku, Tokyo, 113-8655, Japan. .,Institute of Advanced Biomedical Engineering and Science, TWIns, Tokyo Women's Medical University, 8-1 Kawada-cho, Shinjuku-ku, Tokyo, 162-8666, Japan.
| | - Hidekazu Sekine
- Institute of Advanced Biomedical Engineering and Science, TWIns, Tokyo Women's Medical University, 8-1 Kawada-cho, Shinjuku-ku, Tokyo, 162-8666, Japan.
| | - Jun Homma
- Institute of Advanced Biomedical Engineering and Science, TWIns, Tokyo Women's Medical University, 8-1 Kawada-cho, Shinjuku-ku, Tokyo, 162-8666, Japan
| | - Sunghoon Lee
- Department of Electrical Engineering and Information Systems, School of Engineering, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo, 113-8656, Japan
| | - Tomoyuki Yokota
- Department of Electrical Engineering and Information Systems, School of Engineering, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo, 113-8656, Japan
| | - Katsuhisa Matsuura
- Institute of Advanced Biomedical Engineering and Science, TWIns, Tokyo Women's Medical University, 8-1 Kawada-cho, Shinjuku-ku, Tokyo, 162-8666, Japan
| | - Takao Someya
- Department of Electrical Engineering and Information Systems, School of Engineering, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo, 113-8656, Japan
| | - Minoru Ono
- Department of Cardiac Surgery, The University of Tokyo Hospital, 7-3-1 Hongo, Bunkyo-ku, Tokyo, 113-8655, Japan
| | - Tatsuya Shimizu
- Institute of Advanced Biomedical Engineering and Science, TWIns, Tokyo Women's Medical University, 8-1 Kawada-cho, Shinjuku-ku, Tokyo, 162-8666, Japan
| |
Collapse
|
38
|
Deng J, Yuk H, Wu J, Varela CE, Chen X, Roche ET, Guo CF, Zhao X. Electrical bioadhesive interface for bioelectronics. NATURE MATERIALS 2021; 20:229-236. [PMID: 32989277 DOI: 10.1038/s41563-020-00814-2] [Citation(s) in RCA: 223] [Impact Index Per Article: 74.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/18/2020] [Accepted: 08/26/2020] [Indexed: 05/27/2023]
Abstract
Reliable functions of bioelectronic devices require conformal, stable and conductive interfaces with biological tissues. Integrating bioelectronic devices with tissues usually relies on physical attachment or surgical suturing; however, these methods face challenges such as non-conformal contact, unstable fixation, tissue damage, and/or scar formation. Here, we report an electrical bioadhesive (e-bioadhesive) interface, based on a thin layer of a graphene nanocomposite, that can provide rapid (adhesion formation within 5 s), robust (interfacial toughness >400 J m-2) and on-demand detachable integration of bioelectronic devices on diverse wet dynamic tissues. The electrical conductivity (>2.6 S m-1) of the e-bioadhesive interface further allows bidirectional bioelectronic communications. We demonstrate biocompatibility, applicability, mechanical and electrical stability, and recording and stimulation functionalities of the e-bioadhesive interface based on ex vivo porcine and in vivo rat models. These findings offer a promising strategy to improve tissue-device integration and enhance the performance of biointegrated electronic devices.
Collapse
Affiliation(s)
- Jue Deng
- Department of Materials Science and Engineering, Southern University of Science and Technology, Shenzhen, China
- Department of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge, MA, USA
| | - Hyunwoo Yuk
- Department of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge, MA, USA
| | - Jingjing Wu
- Department of Materials Science and Engineering, Southern University of Science and Technology, Shenzhen, China
- Department of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge, MA, USA
| | - Claudia E Varela
- Institute for Medical Engineering and Science, Massachusetts Institute of Technology, Cambridge, MA, USA
- Harvard-MIT Program in Health Sciences and Technology, Cambridge, MA, USA
| | - Xiaoyu Chen
- Department of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge, MA, USA
| | - Ellen T Roche
- Department of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge, MA, USA
- Institute for Medical Engineering and Science, Massachusetts Institute of Technology, Cambridge, MA, USA
| | - Chuan Fei Guo
- Department of Materials Science and Engineering, Southern University of Science and Technology, Shenzhen, China.
| | - Xuanhe Zhao
- Department of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge, MA, USA.
- Department of Civil and Environmental Engineering, Massachusetts Institute of Technology, Cambridge, MA, USA.
| |
Collapse
|
39
|
Kolanowska A, Herman AP, Jędrysiak RG, Boncel S. Carbon nanotube materials for electrocardiography. RSC Adv 2021; 11:3020-3042. [PMID: 35424207 PMCID: PMC8693996 DOI: 10.1039/d0ra08679g] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/12/2020] [Accepted: 01/07/2021] [Indexed: 01/09/2023] Open
Abstract
Carbon nanotubes (CNTs) as 1D nanomaterials of excellent physicochemical characteristics bring hope to compete and eventually conquer traditional solutions in electrocardiography - one of the most powerful and non-invasive diagnostic tools in cardiac disorders. Our review tracks (from 2008) the development of CNTs as critical components in the systems where CNTs serve mainly as electroconductive fillers hence enable recording electrocardiographs (ECG). The characteristics of the CNT-based ECG systems - mainly to-skin electrodes and in a few cases wiring - covers their electrical and mechanical performance (adhesivity, flexibility, elasticity) and qualitative biocompatibility. By comprehensive analysis of the state-of-art in this field, we intend to indicate the most important challenges for the CNT (and other) materials to be applied in scale-up solution for electrocardiography in the near future.
Collapse
Affiliation(s)
- Anna Kolanowska
- Department of Organic Chemistry, Bioorganic Chemistry and Biotechnology, Faculty of Chemistry, Silesian University of Technology, NanoCarbon Group Bolesława Krzywoustego 4 44-100 Gliwice Poland +48 32 237 20 94 +48 32 237 12 72
| | - Artur P Herman
- Department of Organic Chemistry, Bioorganic Chemistry and Biotechnology, Faculty of Chemistry, Silesian University of Technology, NanoCarbon Group Bolesława Krzywoustego 4 44-100 Gliwice Poland +48 32 237 20 94 +48 32 237 12 72
- Department of Semiconductor Materials Engineering, Faculty of Fundamental Problems of Technology, Wrocław University of Science and Technology Wybrzeże Wyspiańskiego 27 50-370 Wrocław Poland
| | - Rafał G Jędrysiak
- Department of Organic Chemistry, Bioorganic Chemistry and Biotechnology, Faculty of Chemistry, Silesian University of Technology, NanoCarbon Group Bolesława Krzywoustego 4 44-100 Gliwice Poland +48 32 237 20 94 +48 32 237 12 72
| | - Sławomir Boncel
- Department of Organic Chemistry, Bioorganic Chemistry and Biotechnology, Faculty of Chemistry, Silesian University of Technology, NanoCarbon Group Bolesława Krzywoustego 4 44-100 Gliwice Poland +48 32 237 20 94 +48 32 237 12 72
| |
Collapse
|
40
|
Wu H, Yang G, Zhu K, Liu S, Guo W, Jiang Z, Li Z. Materials, Devices, and Systems of On-Skin Electrodes for Electrophysiological Monitoring and Human-Machine Interfaces. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2021; 8:2001938. [PMID: 33511003 PMCID: PMC7816724 DOI: 10.1002/advs.202001938] [Citation(s) in RCA: 100] [Impact Index Per Article: 33.3] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/24/2020] [Revised: 09/19/2020] [Indexed: 05/05/2023]
Abstract
On-skin electrodes function as an ideal platform for collecting high-quality electrophysiological (EP) signals due to their unique characteristics, such as stretchability, conformal interfaces with skin, biocompatibility, and wearable comfort. The past decade has witnessed great advancements in performance optimization and function extension of on-skin electrodes. With continuous development and great promise for practical applications, on-skin electrodes are playing an increasingly important role in EP monitoring and human-machine interfaces (HMI). In this review, the latest progress in the development of on-skin electrodes and their integrated system is summarized. Desirable features of on-skin electrodes are briefly discussed from the perspective of performances. Then, recent advances in the development of electrode materials, followed by the analysis of strategies and methods to enhance adhesion and breathability of on-skin electrodes are examined. In addition, representative integrated electrode systems and practical applications of on-skin electrodes in healthcare monitoring and HMI are introduced in detail. It is concluded with the discussion of key challenges and opportunities for on-skin electrodes and their integrated systems.
Collapse
Affiliation(s)
- Hao Wu
- Flexible Electronics Research CenterState Key Laboratory of Digital Manufacturing Equipment and TechnologySchool of Mechanical Science and EngineeringHuazhong University of Science and TechnologyWuhanHubei430074China
| | - Ganguang Yang
- Flexible Electronics Research CenterState Key Laboratory of Digital Manufacturing Equipment and TechnologySchool of Mechanical Science and EngineeringHuazhong University of Science and TechnologyWuhanHubei430074China
| | - Kanhao Zhu
- Flexible Electronics Research CenterState Key Laboratory of Digital Manufacturing Equipment and TechnologySchool of Mechanical Science and EngineeringHuazhong University of Science and TechnologyWuhanHubei430074China
| | - Shaoyu Liu
- Flexible Electronics Research CenterState Key Laboratory of Digital Manufacturing Equipment and TechnologySchool of Mechanical Science and EngineeringHuazhong University of Science and TechnologyWuhanHubei430074China
| | - Wei Guo
- Flexible Electronics Research CenterState Key Laboratory of Digital Manufacturing Equipment and TechnologySchool of Mechanical Science and EngineeringHuazhong University of Science and TechnologyWuhanHubei430074China
| | - Zhuo Jiang
- Department of Materials ScienceFudan UniversityShanghai200433China
| | - Zhuo Li
- Department of Materials ScienceFudan UniversityShanghai200433China
| |
Collapse
|
41
|
Mousavi A, Vahdat S, Baheiraei N, Razavi M, Norahan MH, Baharvand H. Multifunctional Conductive Biomaterials as Promising Platforms for Cardiac Tissue Engineering. ACS Biomater Sci Eng 2020; 7:55-82. [PMID: 33320525 DOI: 10.1021/acsbiomaterials.0c01422] [Citation(s) in RCA: 20] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/17/2022]
Abstract
Adult cardiomyocytes are terminally differentiated cells that result in minimal intrinsic potential for the heart to self-regenerate. The introduction of novel approaches in cardiac tissue engineering aims to repair damages from cardiovascular diseases. Recently, conductive biomaterials such as carbon- and gold-based nanomaterials, conductive polymers, and ceramics that have outstanding electrical conductivity, acceptable mechanical properties, and promoted cell-cell signaling transduction have attracted attention for use in cardiac tissue engineering. Nevertheless, comprehensive classification of conductive biomaterials from the perspective of cardiac cell function is a subject for discussion. In the present review, we classify and summarize the unique properties of conductive biomaterials considered beneficial for cardiac tissue engineering. We attempt to cover recent advances in conductive biomaterials with a particular focus on their effects on cardiac cell functions and proposed mechanisms of action. Finally, current problems, limitations, challenges, and suggested solutions for applications of these biomaterials are presented.
Collapse
Affiliation(s)
- Ali Mousavi
- Department of Chemical and Petroleum Engineering, Sharif University of Technology, Tehran, Iran
| | - Sadaf Vahdat
- Tissue Engineering and Applied Cell Sciences Division, Department of Hematology, Faculty of Medical Sciences, Tarbiat Modares University, 14117-13116 Tehran, Iran.,Department of Stem Cells and Developmental Biology, Cell Science Research Center, Royan Institute for Stem Cell Biology and Technology, ACECR, 1665659911 Tehran, Iran
| | - Nafiseh Baheiraei
- Tissue Engineering and Applied Cell Sciences Division, Department of Hematology, Faculty of Medical Sciences, Tarbiat Modares University, 14117-13116 Tehran, Iran
| | - Mehdi Razavi
- Biionix (Bionic Materials, Implants & Interfaces) Cluster, Department of Internal Medicine, College of Medicine, University of Central Florida, Orlando, Florida 32816, United States
| | - Mohammad Hadi Norahan
- Centro de Biotecnología-FEMSA, Department of Sciences, Tecnologico de Monterrey, Monterrey 64849, NL, México
| | - Hossein Baharvand
- Department of Stem Cells and Developmental Biology, Cell Science Research Center, Royan Institute for Stem Cell Biology and Technology, ACECR, 1665659911 Tehran, Iran.,Department of Developmental Biology, University of Science and Culture, Tehran, Iran
| |
Collapse
|
42
|
Kim KT, Moon S, Kim M, Jo JW, Park CY, Kang SH, Kim YH, Park SK. Highly Scalable and Robust Mesa-Island-Structure Metal-Oxide Thin-Film Transistors and Integrated Circuits Enabled by Stress-Diffusive Manipulation. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2020; 32:e2003276. [PMID: 32875685 DOI: 10.1002/adma.202003276] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/13/2020] [Revised: 07/23/2020] [Indexed: 06/11/2023]
Abstract
The increasing interest in flexible and wearable electronics has demanded a dramatic improvement of mechanical robustness in electronic devices along with high-resolution implemented architectures. In this study, a site-specific stress-diffusive manipulation is demonstrated to fulfill highly robust and ultraflexible amorphous indium-gallium-zinc oxide (a-IGZO) thin-film transistors (TFTs) and integrated circuits. The photochemically activated combustion sol-gel a-IGZO TFTs on a mesa-structured polyimide show an average saturation mobility of 6.06 cm2 V-1 s-1 and a threshold voltage of -0.99 V with less than 9% variation, followed by 10 000 bending cycles with a radius of 125 μm. More importantly, the site-specific monolithic formation of mesa pillar-structured devices can provide fully integrated logic circuits such as seven-stage ring-oscillators, meeting the industrially needed device density and scalability. To exploit the underlying stress-diffusive mechanism, a physical model is provided by using a variety of chemical, structural, and electrical characterizations along with multidomain finite-element analysis simulation. The physical models reveal that a highly scalable and robust device can be achieved via the site-specific mesa architecture, by enabling generation of multineutral layers and fine-tuning the accumulated stresses on specific element of devices with their diffusion out into the boundary of the mesa regions.
Collapse
Affiliation(s)
- Kyung-Tae Kim
- School of Electrical and Electronics Engineering, Chung-Ang University, Seoul, 156-756, South Korea
| | - Sanghee Moon
- School of Electrical and Electronics Engineering, Chung-Ang University, Seoul, 156-756, South Korea
| | - Minho Kim
- School of Advanced Materials Science and Engineering, Sungkyunkwan University, Suwon, 16419, South Korea
| | - Jeong-Wan Jo
- Electrical Engineering Division, Department of Engineering, University of Cambridge, 9 JJ Thomson Avenue, Cambridge, CB3 0FA, UK
| | - Chan-Yong Park
- School of Electrical and Electronics Engineering, Chung-Ang University, Seoul, 156-756, South Korea
| | - Seung-Han Kang
- School of Electrical and Electronics Engineering, Chung-Ang University, Seoul, 156-756, South Korea
| | - Yong-Hoon Kim
- School of Advanced Materials Science and Engineering, Sungkyunkwan University, Suwon, 16419, South Korea
- SKKU Advanced Institute of Nanotechnology (SAINT), Sungkyunkwan University, Suwon, 16419, South Korea
| | - Sung Kyu Park
- School of Electrical and Electronics Engineering, Chung-Ang University, Seoul, 156-756, South Korea
| |
Collapse
|
43
|
Zhang L, Kumar KS, He H, Cai CJ, He X, Gao H, Yue S, Li C, Seet RCS, Ren H, Ouyang J. Fully organic compliant dry electrodes self-adhesive to skin for long-term motion-robust epidermal biopotential monitoring. Nat Commun 2020; 11:4683. [PMID: 32943621 PMCID: PMC7499260 DOI: 10.1038/s41467-020-18503-8] [Citation(s) in RCA: 137] [Impact Index Per Article: 34.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/10/2020] [Accepted: 08/18/2020] [Indexed: 12/05/2022] Open
Abstract
Wearable dry electrodes are needed for long-term biopotential recordings but are limited by their imperfect compliance with the skin, especially during body movements and sweat secretions, resulting in high interfacial impedance and motion artifacts. Herein, we report an intrinsically conductive polymer dry electrode with excellent self-adhesiveness, stretchability, and conductivity. It shows much lower skin-contact impedance and noise in static and dynamic measurement than the current dry electrodes and standard gel electrodes, enabling to acquire high-quality electrocardiogram (ECG), electromyogram (EMG) and electroencephalogram (EEG) signals in various conditions such as dry and wet skin and during body movement. Hence, this dry electrode can be used for long-term healthcare monitoring in complex daily conditions. We further investigated the capabilities of this electrode in a clinical setting and realized its ability to detect the arrhythmia features of atrial fibrillation accurately, and quantify muscle activity during deep tendon reflex testing and contraction against resistance. Reported wearable dry electrodes have limited long-term use due to their imperfect skin compliance and high motion artifacts. Here, the authors report an intrinsically conductive, stretchable polymer dry electrode with excellent self-adhesiveness for long-term high-quality biopotential detection.
Collapse
Affiliation(s)
- Lei Zhang
- Department of Materials Science & Engineering, National University of Singapore, Faculty of gineering, 7 Engineering Drive 1, Singapore, 117574, Singapore
| | - Kirthika Senthil Kumar
- Department of Biomedical Engineering, National University of Singapore, Faculty of Engineering, 4 Engineering Drive 3, Singapore, 117583, Singapore
| | - Hao He
- Department of Materials Science & Engineering, National University of Singapore, Faculty of gineering, 7 Engineering Drive 1, Singapore, 117574, Singapore
| | - Catherine Jiayi Cai
- Department of Biomedical Engineering, National University of Singapore, Faculty of Engineering, 4 Engineering Drive 3, Singapore, 117583, Singapore.,Singapore Institute of Manufacturing Technology, A*STAR Singapore, Fusionopolis Two, 4 Fusionopolis Way, Singapore, 138635, Singapore
| | - Xu He
- Department of Materials Science & Engineering, National University of Singapore, Faculty of gineering, 7 Engineering Drive 1, Singapore, 117574, Singapore
| | - Huxin Gao
- Department of Biomedical Engineering, National University of Singapore, Faculty of Engineering, 4 Engineering Drive 3, Singapore, 117583, Singapore.,National University of Singapore (Suzhou) Research Institute (NUSRI), Suzhou, China
| | - Shizhong Yue
- Department of Materials Science & Engineering, National University of Singapore, Faculty of gineering, 7 Engineering Drive 1, Singapore, 117574, Singapore
| | - Changsheng Li
- Department of Biomedical Engineering, National University of Singapore, Faculty of Engineering, 4 Engineering Drive 3, Singapore, 117583, Singapore.,National University of Singapore (Suzhou) Research Institute (NUSRI), Suzhou, China.,Beijing Advanced Innovation Center for Intelligent Robots and Systems & School of Mechatronical Engineering, Beijing Institute of Technology, Beijing, 100081, China
| | - Raymond Chee-Seong Seet
- Division of Neurology, Department of Medicine, National University Health System, Singapore, Singapore.,Department of Medicine, Yong Loo Lin School of Medicine, National University of Singapore, Singapore, Singapore
| | - Hongliang Ren
- Department of Biomedical Engineering, National University of Singapore, Faculty of Engineering, 4 Engineering Drive 3, Singapore, 117583, Singapore. .,National University of Singapore (Suzhou) Research Institute (NUSRI), Suzhou, China. .,The Chinese University of Hong Kong (CUHK) Robotics Institute, Shatin, Hong Kong.
| | - Jianyong Ouyang
- Department of Materials Science & Engineering, National University of Singapore, Faculty of gineering, 7 Engineering Drive 1, Singapore, 117574, Singapore.
| |
Collapse
|
44
|
Xiang L, Zeng X, Xia F, Jin W, Liu Y, Hu Y. Recent Advances in Flexible and Stretchable Sensing Systems: From the Perspective of System Integration. ACS NANO 2020; 14:6449-6469. [PMID: 32479071 DOI: 10.1021/acsnano.0c01164] [Citation(s) in RCA: 33] [Impact Index Per Article: 8.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/27/2023]
Abstract
Biological signals generated during various biological processes are critically important for providing insight into the human physiological status. Recently, there have been many great efforts in developing flexible and stretchable sensing systems to provide biological signal monitoring platforms with intimate integration with biological surfaces. Here, this review summarizes the recent advances in flexible and stretchable sensing systems from the perspective of electronic system integration. A comprehensive general sensing system architecture is described, which consists of sensors, sensor interface circuits, memories, and digital processing units. The subsequent content focuses on the integration requirements and highlights some advanced progress for each component. Next, representative examples of flexible and stretchable sensing systems for electrophysiological, physical, and chemical information monitoring are introduced. This review concludes with an outlook on the remaining challenges and opportunities for future fully flexible or stretchable sensing systems.
Collapse
Affiliation(s)
- Li Xiang
- Key Laboratory for the Physics and Chemistry of Nanodevices, Center for Carbon-Based Electronics, Frontiers Science Center for Nano-optoelectronics, and Department of Electronics, Peking University, Beijing 100871, China
| | - Xiangwen Zeng
- Key Laboratory for the Physics and Chemistry of Nanodevices, Center for Carbon-Based Electronics, Frontiers Science Center for Nano-optoelectronics, and Department of Electronics, Peking University, Beijing 100871, China
| | - Fan Xia
- Key Laboratory for the Physics and Chemistry of Nanodevices, Center for Carbon-Based Electronics, Frontiers Science Center for Nano-optoelectronics, and Department of Electronics, Peking University, Beijing 100871, China
- Academy for Advanced Interdisciplinary Studies, Peking University, Beijing 100871, China
| | - Wanlin Jin
- Key Laboratory for the Physics and Chemistry of Nanodevices, Center for Carbon-Based Electronics, Frontiers Science Center for Nano-optoelectronics, and Department of Electronics, Peking University, Beijing 100871, China
| | - Youdi Liu
- Key Laboratory for the Physics and Chemistry of Nanodevices, Center for Carbon-Based Electronics, Frontiers Science Center for Nano-optoelectronics, and Department of Electronics, Peking University, Beijing 100871, China
| | - Youfan Hu
- Key Laboratory for the Physics and Chemistry of Nanodevices, Center for Carbon-Based Electronics, Frontiers Science Center for Nano-optoelectronics, and Department of Electronics, Peking University, Beijing 100871, China
- Academy for Advanced Interdisciplinary Studies, Peking University, Beijing 100871, China
- Hunan Institute of Advanced Sensing and Information Technology, Xiangtan University, Hunan 411105, China
| |
Collapse
|
45
|
Fallegger F, Schiavone G, Lacour SP. Conformable Hybrid Systems for Implantable Bioelectronic Interfaces. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2020; 32:e1903904. [PMID: 31608508 DOI: 10.1002/adma.201903904] [Citation(s) in RCA: 45] [Impact Index Per Article: 11.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/19/2019] [Revised: 08/20/2019] [Indexed: 05/27/2023]
Abstract
Conformable bioelectronic systems are promising tools that may aid the understanding of diseases, alleviate pathological symptoms such as chronic pain, heart arrhythmia, and dysfunctions, and assist in reversing conditions such as deafness, blindness, and paralysis. Combining reduced invasiveness with advanced electronic functions, hybrid bioelectronic systems have evolved tremendously in the last decade, pushed by progress in materials science, micro- and nanofabrication, system assembly and packaging, and biomedical engineering. Hybrid integration refers here to a technological approach to embed within mechanically compliant carrier substrates electronic components and circuits prepared with traditional electronic materials. This combination leverages mechanical and electronic performance of polymer substrates and device materials, respectively, and offers many opportunities for man-made systems to communicate with the body with unmet precision. However, trade-offs between materials selection, manufacturing processes, resolution, electrical function, mechanical integrity, biointegration, and reliability should be considered. Herein, prominent trends in manufacturing conformable hybrid systems are analyzed and key design, function, and validation principles are outlined together with the remaining challenges to produce reliable conformable, hybrid bioelectronic systems.
Collapse
Affiliation(s)
- Florian Fallegger
- Bertarelli Foundation Chair in Neuroprosthetic Technology, Laboratory for Soft Bioelectronic Interfaces, Institute of Microengineering, Institute of Bioengineering, Center for Neuroprosthetics, Ecole Polytechnique Fédérale de Lausanne, 1202, Geneva, Switzerland
| | - Giuseppe Schiavone
- Bertarelli Foundation Chair in Neuroprosthetic Technology, Laboratory for Soft Bioelectronic Interfaces, Institute of Microengineering, Institute of Bioengineering, Center for Neuroprosthetics, Ecole Polytechnique Fédérale de Lausanne, 1202, Geneva, Switzerland
| | - Stéphanie P Lacour
- Bertarelli Foundation Chair in Neuroprosthetic Technology, Laboratory for Soft Bioelectronic Interfaces, Institute of Microengineering, Institute of Bioengineering, Center for Neuroprosthetics, Ecole Polytechnique Fédérale de Lausanne, 1202, Geneva, Switzerland
| |
Collapse
|
46
|
Karnaushenko D, Kang T, Bandari VK, Zhu F, Schmidt OG. 3D Self-Assembled Microelectronic Devices: Concepts, Materials, Applications. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2020; 32:e1902994. [PMID: 31512308 DOI: 10.1002/adma.201902994] [Citation(s) in RCA: 35] [Impact Index Per Article: 8.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/10/2019] [Revised: 06/17/2019] [Indexed: 06/10/2023]
Abstract
Modern microelectronic systems and their components are essentially 3D devices that have become smaller and lighter in order to improve performance and reduce costs. To maintain this trend, novel materials and technologies are required that provide more structural freedom in 3D over conventional microelectronics, as well as easier parallel fabrication routes while maintaining compatability with existing manufacturing methods. Self-assembly of initially planar membranes into complex 3D architectures offers a wealth of opportunities to accommodate thin-film microelectronic functionalities in devices and systems possessing improved performance and higher integration density. Existing work in this field, with a focus on components constructed from 3D self-assembly, is reviewed, and an outlook on their application potential in tomorrow's microelectronics world is provided.
Collapse
Affiliation(s)
- Daniil Karnaushenko
- Institute for Integrative Nanosciences, Leibniz IFW Dresden, Dresden, 01069, Germany
| | - Tong Kang
- Institute for Integrative Nanosciences, Leibniz IFW Dresden, Dresden, 01069, Germany
| | - Vineeth K Bandari
- Institute for Integrative Nanosciences, Leibniz IFW Dresden, Dresden, 01069, Germany
- Material Systems for Nanoelectronics, Chemnitz University of Technology, Chemnitz, 09107, Germany
- Research Center for Materials, Architectures and Integration of Nanomembranes (MAIN), Rosenbergstraße 6, TU Chemnitz, Chemnitz, 09126, Germany
| | - Feng Zhu
- Institute for Integrative Nanosciences, Leibniz IFW Dresden, Dresden, 01069, Germany
- Material Systems for Nanoelectronics, Chemnitz University of Technology, Chemnitz, 09107, Germany
- Research Center for Materials, Architectures and Integration of Nanomembranes (MAIN), Rosenbergstraße 6, TU Chemnitz, Chemnitz, 09126, Germany
| | - Oliver G Schmidt
- Institute for Integrative Nanosciences, Leibniz IFW Dresden, Dresden, 01069, Germany
- Material Systems for Nanoelectronics, Chemnitz University of Technology, Chemnitz, 09107, Germany
- Research Center for Materials, Architectures and Integration of Nanomembranes (MAIN), Rosenbergstraße 6, TU Chemnitz, Chemnitz, 09126, Germany
- School of Science, TU Dresden, Dresden, 01062, Germany
| |
Collapse
|
47
|
Araki T, Uemura T, Yoshimoto S, Takemoto A, Noda Y, Izumi S, Sekitani T. Wireless Monitoring Using a Stretchable and Transparent Sensor Sheet Containing Metal Nanowires. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2020; 32:e1902684. [PMID: 31782576 DOI: 10.1002/adma.201902684] [Citation(s) in RCA: 38] [Impact Index Per Article: 9.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/26/2019] [Revised: 09/02/2019] [Indexed: 05/24/2023]
Abstract
Mechanically and visually imperceptible sensor sheets integrated with lightweight wireless loggers are employed in ultimate flexible hybrid electronics (FHE) to reduce vital stress/nervousness and monitor natural biosignal responses. The key technologies and applications for conceptual sensor system fabrication are reported, as exemplified by the use of a stretchable sensor sheet completely conforming to an individual's body surface to realize a low-noise wireless monitoring system (<1 µV) that can be attached to the human forehead for recording electroencephalograms. The above system can discriminate between Alzheimer's disease and the healthy state, thus offering a rapid in-home brain diagnosis possibility. Moreover, the introduction of metal nanowires to improve the transparency of the biocompatible sensor sheet allows one to wirelessly acquire electrocorticograms of nonhuman primates and simultaneously offers optogenetic stimulation such as toward-the-brain-machine interface under free movement. Also discussed are effective methods of improving electrical reliability, biocompatibility, miniaturization, etc., for metal nanowire based tracks and exploring the use of an organic amplifier as an important component to realize a flexible active probe with a high signal-to-noise ratio. Overall, ultimate FHE technologies are demonstrated to achieve efficient closed-loop systems for healthcare management, medical diagnostics, and preclinical studies in neuroscience and neuroengineering.
Collapse
Affiliation(s)
- Teppei Araki
- The Institute of Scientific and Industrial Research (ISIR), Osaka University, 8-1 Mihogaoka, Ibaraki, Osaka, 567-0047, Japan
- Advanced Photonics and Biosensing Open Innovation Laboratory, National Institute of Advanced Industrial Science and Technology (AIST), Suita, Osaka, 565-0871, Japan
- Graduate School of Engineering, Osaka University, Suita, Osaka, 565-0871, Japan
| | - Takafumi Uemura
- The Institute of Scientific and Industrial Research (ISIR), Osaka University, 8-1 Mihogaoka, Ibaraki, Osaka, 567-0047, Japan
- Advanced Photonics and Biosensing Open Innovation Laboratory, National Institute of Advanced Industrial Science and Technology (AIST), Suita, Osaka, 565-0871, Japan
| | - Shusuke Yoshimoto
- The Institute of Scientific and Industrial Research (ISIR), Osaka University, 8-1 Mihogaoka, Ibaraki, Osaka, 567-0047, Japan
| | - Ashuya Takemoto
- The Institute of Scientific and Industrial Research (ISIR), Osaka University, 8-1 Mihogaoka, Ibaraki, Osaka, 567-0047, Japan
- Advanced Photonics and Biosensing Open Innovation Laboratory, National Institute of Advanced Industrial Science and Technology (AIST), Suita, Osaka, 565-0871, Japan
- Graduate School of Engineering, Osaka University, Suita, Osaka, 565-0871, Japan
| | - Yuki Noda
- The Institute of Scientific and Industrial Research (ISIR), Osaka University, 8-1 Mihogaoka, Ibaraki, Osaka, 567-0047, Japan
- Artificial Intelligence Research Center, The Institute of Scientific and Industrial Research (ISIR), Osaka University, 8-1 Mihogaoka, Ibaraki, Osaka, 567-0047, Japan
| | - Shintaro Izumi
- The Institute of Scientific and Industrial Research (ISIR), Osaka University, 8-1 Mihogaoka, Ibaraki, Osaka, 567-0047, Japan
| | - Tsuyoshi Sekitani
- The Institute of Scientific and Industrial Research (ISIR), Osaka University, 8-1 Mihogaoka, Ibaraki, Osaka, 567-0047, Japan
- Advanced Photonics and Biosensing Open Innovation Laboratory, National Institute of Advanced Industrial Science and Technology (AIST), Suita, Osaka, 565-0871, Japan
- Graduate School of Engineering, Osaka University, Suita, Osaka, 565-0871, Japan
| |
Collapse
|
48
|
Chow PCY, Someya T. Organic Photodetectors for Next-Generation Wearable Electronics. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2020; 32:e1902045. [PMID: 31373081 DOI: 10.1002/adma.201902045] [Citation(s) in RCA: 159] [Impact Index Per Article: 39.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/31/2019] [Revised: 05/20/2019] [Indexed: 05/03/2023]
Abstract
Next-generation wearable electronics will need to be mechanically flexible and stretchable such that they can be conformally attached onto the human body. Photodetectors that are available in today's market are based on rigid inorganic crystalline materials and they have limited mechanical flexibility. In contrast, photodetectors based on organic polymers and molecules have emerged as promising alternatives due to their inherent mechanical softness, ease of processing, tunable optoelectronic properties, good light sensing performance, and biocompatibility. Here, the recent advances of organic photodetectors in terms of both optoelectronic and mechanical properties are outlined and discussed, and their application in wearable electronics including health monitoring sensors, artificial vision, and self-powering integrated devices are highlighted.
Collapse
Affiliation(s)
- Philip C Y Chow
- Department of Chemistry, The Hong Kong University of Science and Technology (HKUST), Clear Water Bay, Kowloon, Hong Kong
- HKUST-Shenzhen Research Institute, No. 9 Yuexing 1st Road, Hi-tech Park, Nanshan, Shenzhen, 518057, P. R. China
| | - Takao Someya
- Department of Electrical Engineering and Information Systems, School of Engineering, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo, 113-8656, Japan
- Thin-Film Device Laboratory & Center for Emergent Matter Science (CEMS), RIKEN, 2-1 Hirosawa, Wako, Saitama, 351-0198, Japan
| |
Collapse
|
49
|
Chen H, Zhang W, Li M, He G, Guo X. Interface Engineering in Organic Field-Effect Transistors: Principles, Applications, and Perspectives. Chem Rev 2020; 120:2879-2949. [PMID: 32078296 DOI: 10.1021/acs.chemrev.9b00532] [Citation(s) in RCA: 99] [Impact Index Per Article: 24.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Abstract
Heterogeneous interfaces that are ubiquitous in optoelectronic devices play a key role in the device performance and have led to the prosperity of today's microelectronics. Interface engineering provides an effective and promising approach to enhancing the device performance of organic field-effect transistors (OFETs) and even developing new functions. In fact, researchers from different disciplines have devoted considerable attention to this concept, which has started to evolve from simple improvement of the device performance to sophisticated construction of novel functionalities, indicating great potential for further applications in broad areas ranging from integrated circuits and energy conversion to catalysis and chemical/biological sensors. In this review article, we provide a timely and comprehensive overview of current efficient approaches developed for building various delicate functional interfaces in OFETs, including interfaces within the semiconductor layers, semiconductor/electrode interfaces, semiconductor/dielectric interfaces, and semiconductor/environment interfaces. We also highlight the major contributions and new concepts of integrating molecular functionalities into electrical circuits, which have been neglected in most previous reviews. This review will provide a fundamental understanding of the interplay between the molecular structure, assembly, and emergent functions at the molecular level and consequently offer novel insights into designing a new generation of multifunctional integrated circuits and sensors toward practical applications.
Collapse
Affiliation(s)
- Hongliang Chen
- Beijing National Laboratory for Molecular Sciences, State Key Laboratory for Structural Chemistry of Unstable and Stable Species, College of Chemistry and Molecular Engineering, Peking University, Beijing 100871, P. R. China
| | - Weining Zhang
- Beijing National Laboratory for Molecular Sciences, State Key Laboratory for Structural Chemistry of Unstable and Stable Species, College of Chemistry and Molecular Engineering, Peking University, Beijing 100871, P. R. China
| | - Mingliang Li
- Academy for Advanced Interdisciplinary Studies, Peking University, Beijing 100871, P. R. China
| | - Gen He
- Beijing National Laboratory for Molecular Sciences, State Key Laboratory for Structural Chemistry of Unstable and Stable Species, College of Chemistry and Molecular Engineering, Peking University, Beijing 100871, P. R. China
| | - Xuefeng Guo
- Beijing National Laboratory for Molecular Sciences, State Key Laboratory for Structural Chemistry of Unstable and Stable Species, College of Chemistry and Molecular Engineering, Peking University, Beijing 100871, P. R. China.,Academy for Advanced Interdisciplinary Studies, Peking University, Beijing 100871, P. R. China.,Department of Materials Science and Engineering, College of Engineering, Peking University, Beijing 100871, P. R. China
| |
Collapse
|
50
|
Ueda HR, Ertürk A, Chung K, Gradinaru V, Chédotal A, Tomancak P, Keller PJ. Tissue clearing and its applications in neuroscience. Nat Rev Neurosci 2020; 21:61-79. [PMID: 31896771 PMCID: PMC8121164 DOI: 10.1038/s41583-019-0250-1] [Citation(s) in RCA: 300] [Impact Index Per Article: 75.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Accepted: 11/18/2019] [Indexed: 02/06/2023]
Abstract
State-of-the-art tissue-clearing methods provide subcellular-level optical access to intact tissues from individual organs and even to some entire mammals. When combined with light-sheet microscopy and automated approaches to image analysis, existing tissue-clearing methods can speed up and may reduce the cost of conventional histology by several orders of magnitude. In addition, tissue-clearing chemistry allows whole-organ antibody labelling, which can be applied even to thick human tissues. By combining the most powerful labelling, clearing, imaging and data-analysis tools, scientists are extracting structural and functional cellular and subcellular information on complex mammalian bodies and large human specimens at an accelerated pace. The rapid generation of terabyte-scale imaging data furthermore creates a high demand for efficient computational approaches that tackle challenges in large-scale data analysis and management. In this Review, we discuss how tissue-clearing methods could provide an unbiased, system-level view of mammalian bodies and human specimens and discuss future opportunities for the use of these methods in human neuroscience.
Collapse
Affiliation(s)
- Hiroki R Ueda
- Department of Systems Pharmacology, University of Tokyo, Tokyo, Japan.
- Laboratory for Synthetic Biology, RIKEN BDR, Suita, Japan.
| | - Ali Ertürk
- Institute for Stroke and Dementia Research, Klinikum der Universität München, Ludwig-Maximilian University of Munich, Munich, Germany
- Institute of Tissue Engineering and Regenerative Medicine, Helmholtz Zentrum München, Neuherberg, Germany
- Munich Cluster for Systems Neurology (SyNergy), Munich, Germany
| | - Kwanghun Chung
- Institute for Medical Engineering and Science, Massachusetts Institute of Technology, Cambridge, MA, USA
- Picower Institute for Learning and Memory, Massachusetts Institute of Technology, Cambridge, MA, USA
- Department of Chemical Engineering, Massachusetts Institute of Technology, Cambridge, MA, USA
- Department of Brain and Cognitive Sciences, Massachusetts Institute of Technology, Cambridge, MA, USA
- Eli & Edythe Broad Institute of MIT and Harvard, Cambridge, MA, USA
- Center for NanoMedicine, Institute for Basic Science, Seoul, Republic of Korea
- Graduate Program of Nano Biomedical Engineering, Yonsei-IBS Institute, Yonsei University, Seoul, Republic of Korea
| | - Viviana Gradinaru
- Division of Biology and Biological Engineering, California Institute of Technology, Pasadena, CA, USA
| | - Alain Chédotal
- Institut de la Vision, Sorbonne Université, INSERM, CNRS, Paris, France
| | - Pavel Tomancak
- Max Planck Institute of Molecular Cell Biology and Genetics, Dresden, Germany
- IT4Innovations, Technical University of Ostrava, Ostrava, Czech Republic
| | - Philipp J Keller
- Janelia Research Campus, Howard Hughes Medical Institute, Ashburn, VA, USA
| |
Collapse
|