Coherent coupling between radio frequency, optical, and acoustic waves in piezo-optomechanical circuits

Near GHz Lithium Niobate Higher-Order Topological Nanomechanical Metamaterials

Precise control over the localization of acoustic waves at microwave frequencies reveals new opportunities in emerging fields like quantum acoustics and spin mechanics. Conventional microwave acoustic resonators, engineered via phonon band structures, are prone to disturbances from fabrication defects, constraining their further development. Acoustic high-order topological insulators, known for their defect robustness and precise localization, have emerged as the preferred approach for developing high-performance resonators. However, the operating frequencies of existing acoustic high-order topological insulators have been limited to relatively low frequencies. Here, we present on-chip acoustic higher-order topological insulators (700-750 MHz) operating in the ultrahigh-frequency band, using lithium niobate nanomechanical metamaterials with smooth surfaces and sharp corners. By breaking the inversion symmetry of honeycomb lattices, higher-order valley Hall topological insulators featuring both odd-type and even-type corner states are constructed. Together, these advances promote the practical application of topological acoustics.

Acoustic Modulation of Individual Nanowire Quantum Dots Integrated into a Hybrid Thin-Film Lithium Niobate Photonic Platform

Surface acoustic waves are a powerful tool for controlling quantum systems, including quantum dots (QDs), where the oscillating strain field can modulate the emission wavelengths. We integrate InAsP/InP nanowire QDs onto a thin-film lithium niobate platform and embed them within Si3N4-loaded waveguides. We achieve a 0.70 nm peak-to-peak wavelength modulation at 13 dBm using a single focused interdigital transducer (FIDT) operating at 400 MHz, and we double this amplitude to 1.4 nm by using two FIDTs as an acoustic cavity. Additionally, we independently modulate two QDs with an initial wavelength difference of 0.5 nm, both integrated on the same chip. We show that their modulated emissions overlap, demonstrating the potential to bring them to a common emission wavelength after spectral filtering. This local strain-tuning represents a significant step toward generating indistinguishable single photons from remote emitters heterogeneously integrated on a single chip, advancing on-chip quantum information processing with multiple QDs.

Bidirectional microwave-optical transduction based on integration of high-overtone bulk acoustic resonators and photonic circuits

Coherent interconversion between microwave and optical frequencies can serve as both classical and quantum interfaces for computing, communication, and sensing. Here, we present a compact microwave-optical transducer based on monolithic integration of piezoelectric actuators on silicon nitride photonic circuits. Such an actuator couples microwave signals to a high-overtone bulk acoustic resonator defined by the silica cladding of the optical waveguide core, suspended to enhance electromechanical and optomechanical couplings. At room temperature, this triply resonant piezo-optomechanical transducer achieves an off-chip photon number conversion efficiency of 1.6 × 10-5 over a bandwidth of 25 MHz at an input pump power of 21 dBm. The approach is scalable in manufacturing and does not rely on superconducting resonators. As the transduction process is bidirectional, we further demonstrate the synthesis of microwave pulses from a purely optical input. Capable of leveraging multiple acoustic modes for transduction, this platform offers prospects for frequency-multiplexed qubit interconnects and microwave photonics at large.

Acoustic wave-based single photon shifter for solid-state sources

Controlling the frequency of nonclassical light is essential for the implementation of quantum computation, communication, and the integration of various quantum systems. However, there is a practical absence of easy-to-integrate frequency-shift devices for solid-state single-photon sources. Here, we propose an integrated single-photon frequency shifter that utilizes acousto-optic modulation. The device is composed of two interdigital transducers (IDTs) for generating acoustic waves on a lithium niobate on insulator (LNOI) platform, along with a silicon waveguide that is periodically positioned at the nodes of the acoustic wave to enhance the interaction length. We achieved a low half-wavelength voltage length product V π×L of 0.18 V cm. With a driving frequency of 129.7 MHz and a driving voltage of 10 V, a frequency shift of up to ± 405 GHz is realized with near-unity conversion efficiency. Our findings illustrate the feasibility of deterministic on-chip quantum spectral control, which is pivotal for constructing hybrid quantum networks.

Coherent optical coupling to surface acoustic wave devices

Surface acoustic waves (SAW) and associated devices are ideal for sensing, metrology, and hybrid quantum devices. While the advances demonstrated to date are largely based on electromechanical coupling, a robust and customizable coherent optical coupling would unlock mature and powerful cavity optomechanical control techniques and an efficient optical pathway for long-distance quantum links. Here we demonstrate direct and robust coherent optical coupling to Gaussian surface acoustic wave cavities with small mode volumes and high quality factors (>105 measured here) through a Brillouin-like optomechanical interaction. High-frequency SAW cavities designed with curved metallic acoustic reflectors deposited on crystalline substrates are efficiently optically accessed along piezo-active directions, as well as non-piezo-active (electromechanically inaccessible) directions. The precise optical technique uniquely enables controlled analysis of dissipation mechanisms as well as detailed transverse spatial mode spectroscopy. These advantages combined with simple fabrication, large power handling, and strong coupling to quantum systems make SAW optomechanical platforms particularly attractive for sensing, material science, and hybrid quantum systems.

Valley Pseudospin Polarized Evanescent Coupling between Microwave Ring Resonator and Waveguide in Phononic Topological Insulators

A coupled ring-waveguide structure is at the core of bosonic wave-based information processing systems, enabling advanced wave manipulations such as filtering, routing, and multiplexing. However, its miniaturization is challenging due to momentum conservation issues in rings with larger curvature that induce significant backscattering and radiation leakage and hampering stable operation. Here, we address it by taking an alternative approach of using topological technology in wavelength-scale and microwave ring-waveguide coupled systems built in nanoengineered phononic crystals. Our approach, which leverages pseudospin conservation in valley topological systems, eliminates phonon backscattering and achieves directional evanescent coupling. The resultant hypersonic waves in the tiny ring exhibit robust transport and resonant circulation. Furthermore, the ring-waveguide hybridization enables critical coupling, where valley-dependent ring-waveguide interference blocks the transmission. Our findings reveal the capability of topological phenomena for managing ultrahigh-frequency phonons in nano/microscale structures and pave the way for advanced phononic circuits in classical and quantum signal processing applications.

Optomechanical Microwave-to-Optical Photon Transducer Chips: Empowering the Quantum Internet Revolution

The first quantum revolution has brought us the classical Internet and information technology. Today, as technology advances rapidly, the second quantum revolution quietly arrives, with a crucial moment for quantum technology to establish large-scale quantum networks. However, solid-state quantum bits (such as superconducting and semiconductor qubits) typically operate in the microwave frequency range, making it challenging to transmit signals over long distances. Therefore, there is an urgent need to develop quantum transducer chips capable of converting microwaves into optical photons in the communication band, since the thermal noise of optical photons at room temperature is negligible, rendering them an ideal information carrier for large-scale spatial communication. Such devices are important for connecting different physical platforms and efficiently transmitting quantum information. This paper focuses on the fast-developing field of optomechanical quantum transducers, which has flourished over the past decade, yielding numerous advanced achievements. We categorize transducers based on various mechanical resonators and discuss their principles of operation and their achievements. Based on existing research on optomechanical transducers, we compare the parameters of several mechanical resonators and analyze their advantages and limitations, as well as provide prospects for the future development of quantum transducers.

Optomechanical ring resonator for efficient microwave-optical frequency conversion

Phonons traveling in solid-state devices are emerging as a universal excitation for coupling different physical systems. Phonons at microwave frequencies have a similar wavelength to optical photons in solids, enabling optomechanical microwave-optical transduction of classical and quantum signals. It becomes conceivable to build optomechanical integrated circuits (OMIC) that guide both photons and phonons and interconnect photonic and phononic devices. Here, we demonstrate an OMIC including an optomechanical ring resonator (OMR), where  co-resonant infrared photons and GHz phonons induce significantly enhanced interconversion. The platform is hybrid, using wide bandgap semiconductor gallium phosphide (GaP) for waveguiding and piezoelectric zinc oxide (ZnO) for phonon generation. The OMR features photonic and phononic quality factors of >1 × 105 and 3.2 × 103, respectively. The optomechanical interconversion between photonic modes achieved an internal conversion efficiency [Formula: see text] and a total device efficiency [Formula: see text] at a low acoustic pump power of 1.6 mW. The efficient conversion in OMICs enables microwave-optical transduction for quantum information and microwave photonics applications.

Sub-Hz Closed-Loop Electro-Optomechanical Oscillator with Gallium Phosphide Photonic Crystal Integrated on SoI Circuitry

We report on a new approach of a low phase noise electro-optomechanical oscillator directly working in the GHz frequency range. The developed nanoscale oscillator is a one-dimensional photonic crystal made of gallium phosphide (GaP), heterogeneously integrated on silicon-on-insulator circuitry. Based on the strong interaction between the optical mode at the telecommunication wavelength and the mechanical mode in GHz, ultra-pure mechanical oscillations are enabled and directly imprinted on an optical carrier. Further stabilization is achieved with a delayed optoelectronic feedback loop using integrated electro-mechanical self-injection. We achieve a short-term stability of 0.7 Hz linewidth and a long-term stability with an Allan deviation below 10-7 Hz/Hz at 10 s averaging time, which represents an important step toward fully integrated optomechanical oscillators. Integrability and the low phase noise of this oscillator address some of the most important needs of optoelectronic oscillators and pave the way toward on-chip integrated microwave oscillators for microwave applications such as RADARs.

Low Noise Opto-Electro-Mechanical Modulator for RF-to-Optical Transduction in Quantum Communications

In this work, we present an Opto-Electro-Mechanical Modulator (OEMM) for RF-to-optical transduction realized via an ultra-coherent nanomembrane resonator capacitively coupled to an rf injection circuit made of a microfabricated read-out able to improve the electro-optomechanical interaction. This device configuration can be embedded in a Fabry-Perot cavity for electromagnetic cooling of the LC circuit in a dilution refrigerator exploiting the opto-electro-mechanical interaction. To this aim, an optically measured steady-state frequency shift of 380 Hz was seen with a polarization voltage of 30 V and a Q-factor of the assembled device above 106 at room temperature. The rf-sputtered titanium nitride layer can be made superconductive to develop efficient quantum transducers.

Optomechanical Generation of Coherent GHz Vibrations in a Phononic Waveguide

Nanophononics has the potential for information transfer, in an analogous manner to its photonic and electronic counterparts. The adoption of phononic systems has been limited, due to difficulties associated with the generation, manipulation, and detection of phonons, especially at GHz frequencies. Existing techniques often require piezoelectric materials with an external radiofrequency excitation that are not readily integrated into existing CMOS infrastructures, while nonpiezoelectric demonstrations have been inefficient. In this Letter, we explore the optomechanical generation of coherent phonons in a suspended 2D silicon phononic crystal cavity with a guided mode around 6.8 GHz. By incorporating an air-slot into this cavity, we turn the phononic waveguide into an optomechanical platform that exploits localized photonic modes resulting from inherent fabrication imperfections for the transduction of mechanics. Such a platform exhibits very fine control of phonons using light, and is capable of coherent self-sustained phonon generation around 6.8 GHz, operating at room temperature. The ability to generate high frequency coherent mechanical vibrations within such a simple 2D CMOS-compatible system could be a first step towards the development of sources in phononic circuitry and the coherent manipulation of other solid-state properties.

Compact ring resonators of silicon nanorods for strong optomechanical interaction

Optomechanical interaction in microstructures plays a more and more important role in the fields of quantum technology, information processing, and sensing, among others. It is still a challenge to obtain a strong optomechanical interaction in a compact device. Here, we propose and demonstrate that compact ring resonators consisting of silicon nanorods can realize strong optomechanical interaction even surpassing that of most optical microcavities. The proposed ring resonators can well confine infrared optical waves by the quasi-bound states in the continuum. Meanwhile, each nanorod in the resonator acts as a mechanical resonator of GHz resonating frequency, thus realizing an optomechanical coupling rate of up to 1.8 MHz. We have found that the interaction area can be extended by increasing the number of nanorods while maintaining the optomechanical interaction strength. Finally, we have studied the influence of supporting structures for suspended nanorods on the optomechanical interaction properties. The proposed ring resonators of silicon nanorods offer a promising platform for the study of optomechanical interaction.

2D-materials-integrated optoelectromechanics: recent progress and future perspectives

The discovery of two-dimensional (2D) materials has gained worldwide attention owing to their extraordinary optical, electrical, and mechanical properties. Due to their atomic layer thicknesses, the emerging 2D materials have great advantages of enhanced interaction strength, broad operating bandwidth, and ultralow power consumption for optoelectromechanical coupling. The van der Waals (vdW) epitaxy or multidimensional integration of 2D material family provides a promising platform for on-chip advanced nano-optoelectromechanical systems (NOEMS). Here, we provide a comprehensive review on the nanomechanical properties of 2D materials and the recent advances of 2D-materials-integrated nano-electromechanical systems and nano-optomechanical systems. By utilizing active nanophotonics and optoelectronics as the interface, 2D active NOEMS and their coupling effects are particularly highlighted at the 2D atomic scale. Finally, we share our viewpoints on the future perspectives and key challenges of scalable 2D-materials-integrated active NOEMS for on-chip miniaturized, lightweight, and multifunctional integration applications.

Coherent Coupling between Phonons, Magnons, and Photons

Mechanical degrees of freedom, which have often been overlooked in various quantum systems, have been studied for applications ranging from quantum information processing to sensing. Here, we develop a hybrid platform consisting of a magnomechanical cavity and an optomechanical cavity, which are coherently coupled by the straightway physical contact. The phonons in the system can be manipulated either with the magnetostrictive interaction or optically through the radiation pressure. Together with mechanical state preparation and sensitive readout, we demonstrate the microwave-to-optical conversion with an ultrawide tuning range up to 3 GHz. In addition, we observe a mechanical motion interference effect, in which the optically driven mechanical motion is canceled by the microwave-driven coherent motion. Manipulating mechanical oscillators with equal facility through both magnonic and photonic channels enables new architectures for signal transduction between the optical, microwave, mechanical, and magnetic fields.

On-chip generation and dynamic piezo-optomechanical rotation of single photons

Integrated photonic circuits are key components for photonic quantum technologies and for the implementation of chip-based quantum devices. Future applications demand flexible architectures to overcome common limitations of many current devices, for instance the lack of tuneabilty or built-in quantum light sources. Here, we report on a dynamically reconfigurable integrated photonic circuit comprising integrated quantum dots (QDs), a Mach-Zehnder interferometer (MZI) and surface acoustic wave (SAW) transducers directly fabricated on a monolithic semiconductor platform. We demonstrate on-chip single photon generation by the QD and its sub-nanosecond dynamic on-chip control. Two independently applied SAWs piezo-optomechanically rotate the single photon in the MZI or spectrally modulate the QD emission wavelength. In the MZI, SAWs imprint a time-dependent optical phase and modulate the qubit rotation to the output superposition state. This enables dynamic single photon routing with frequencies exceeding one gigahertz. Finally, the combination of the dynamic single photon control and spectral tuning of the QD realizes wavelength multiplexing of the input photon state and demultiplexing it at the output. Our approach is scalable to multi-component integrated quantum photonic circuits and is compatible with hybrid photonic architectures and other key components for instance photonic resonators or on-chip detectors.

Ultra-low-noise microwave to optics conversion in gallium phosphide

Mechanical resonators can act as excellent intermediaries to interface single photons in the microwave and optical domains due to their high quality factors. Nevertheless, the optical pump required to overcome the large energy difference between the frequencies can add significant noise to the transduced signal. Here we exploit the remarkable properties of thin-film gallium phosphide to demonstrate bi-directional on-chip conversion between microwave and optical frequencies, realized by piezoelectric actuation of a Gigahertz-frequency optomechanical resonator. The large optomechanical coupling and the suppression of two-photon absorption in the material allows us to operate the device at optomechanical cooperativities greatly exceeding one. Alternatively, when using a pulsed upconversion pump, we demonstrate that we induce less than one thermal noise phonon. We include a high-impedance on-chip matching resonator to mediate the mechanical load with the 50-Ω source. Our results establish gallium phosphide as a versatile platform for ultra-low-noise conversion of photons between microwave and optical frequencies.

Excitation and detection of acoustic phonons in nanoscale systems

Phonons play a key role in the physical properties of materials, and have long been a topic of study in physics. While the effects of phonons had historically been considered to be a hindrance, modern research has shown that phonons can be exploited due to their ability to couple to other excitations and consequently affect the thermal, dielectric, and electronic properties of solid state systems, greatly motivating the engineering of phononic structures. Advances in nanofabrication have allowed for structuring and phonon confinement even down to the nanoscale, drastically changing material properties. Despite developments in fabricating such nanoscale devices, the proper manipulation and characterization of phonons continues to be challenging. However, a fundamental understanding of these processes could enable the realization of key applications in diverse fields such as topological phononics, information technologies, sensing, and quantum electrodynamics, especially when integrated with existing electronic and photonic devices. Here, we highlight seven of the available methods for the excitation and detection of acoustic phonons and vibrations in solid materials, as well as advantages, disadvantages, and additional considerations related to their application. We then provide perspectives towards open challenges in nanophononics and how the additional understanding granted by these techniques could serve to enable the next generation of phononic technological applications.

Random number generation with a chaotic electromechanical resonator

Chaos enables the emergence of randomness in deterministic physical systems. Therefore it can be exploited for the conception of true random number generators mandatory in classical cryptography applications. Meanwhile, nanomechanical oscillators, at the core of many on-board functionalities such as sensing, reveal as excellent candidates to behave chaotically. This is made possible thanks to intrinsic mechanical nonlinearities emerging at the nanoscale. Here we present a platform gathering a nanomechanical oscillator and its integrated capacitive actuation. Using a modulation of the resonant force induced by the electrodes, we demonstrate chaotic dynamics and study how it depends on the dissipation of the system. The randomness of a binary sequence generated from a chaotic time trace is evaluated and discussed such that the generic parameters enabling successful random number generation can be established. This demonstration makes use of concepts which are sufficiently general to be applied to the next generation of nano-electro-optomechanical systems.

Efficient acousto-optic modulation using a microring resonator on a thin-film lithium niobate-chalcogenide hybrid platform

This Letter presents the first, to the best of our knowledge, thin-film lithium niobate-chalcogenide based microring acousto-optic modulator where an interdigital transducer and a chalcogenide strip waveguide are integrated on X-cut thin-film lithium niobate. The microring resonator exhibits a high loaded quality factor of 5 × 10⁵. The developed hybrid acousto-optic modulator with an interaction length of 120 µm demonstrates an effective half-wave voltage of only 1.74 V, which corresponds to a voltage-length product of 0.02 V•cm. The performance of the acousto-optic modulator demonstrated on the unsuspended thin-film lithium niobate-chalcogenide waveguide platform is on par with that obtained from an acoustic cavity assisted homogeneous lithium niobate counterpart.

Highly efficient acousto-optic modulation using nonsuspended thin-film lithium niobate-chalcogenide hybrid waveguides

A highly efficient on-chip acousto-optic modulator is as a key component and occupies an exceptional position in microwave-to-optical conversion. Homogeneous thin-film lithium niobate is preferentially employed to build the suspended configuration for the acoustic resonant cavity, with the aim of improving the modulation efficiency of the device. However, the limited cavity length and complex fabrication recipe of the suspended prototype restrain further breakthroughs in modulation efficiency and impose challenges for waveguide fabrication. In this work, based on a nonsuspended thin-film lithium niobate-chalcogenide glass hybrid Mach-Zehnder interferometer waveguide platform, we propose and demonstrate a built-in push-pull acousto-optic modulator with a half-wave-voltage-length product VπL as low as 0.03 V cm that presents a modulation efficiency comparable to that of a state-of-the-art suspended counterpart. A microwave modulation link is demonstrated using our developed built-in push-pull acousto-optic modulator, which has the advantage of low power consumption. The nontrivial acousto-optic modulation performance benefits from the superior photoelastic property of the chalcogenide membrane and the completely bidirectional participation of the antisymmetric Rayleigh surface acoustic wave mode excited by the impedance-matched interdigital transducer, overcoming the issue of low modulation efficiency induced by the incoordinate energy attenuation of acoustic waves applied to the Mach-Zehnder interferometer with two arms in traditional push-pull acousto-optic modulators.

Microwave-to-optical conversion with a gallium phosphide photonic crystal cavity

Electrically actuated optomechanical resonators provide a route to quantum-coherent, bidirectional conversion of microwave and optical photons. Such devices could enable optical interconnection of quantum computers based on qubits operating at microwave frequencies. Here we present a platform for microwave-to-optical conversion comprising a photonic crystal cavity made of single-crystal, piezoelectric gallium phosphide integrated on pre-fabricated niobium circuits on an intrinsic silicon substrate. The devices exploit spatially extended, sideband-resolved mechanical breathing modes at ~3.2 GHz, with vacuum optomechanical coupling rates of up to g₀/2π ≈ 300 kHz. The mechanical modes are driven by integrated microwave electrodes via the inverse piezoelectric effect. We estimate that the system could achieve an electromechanical coupling rate to a superconducting transmon qubit of ~200 kHz. Our work represents a decisive step towards integration of piezoelectro-optomechanical interfaces with superconducting quantum processors.

A route to scalability for superconducting quantum computation is the modular approach, which however requires coherent microwave-to-optical conversion. Here the authors use gallium phosphide optomechanical crystal cavities for this task, exploiting their high refractive index and large OM coupling rate.

Dissipation-driven entanglement between two microwave fields in a four-mode hybrid cavity optomechanical system

The generation and manipulation of highly pure and strongly entangled steady state in a quantum system are vital tasks in the standard continuous-variable teleportation protocol. Especially, the manipulation implemented in integrated devices is even more crucial in practical quantum information applications. Here we propose an effective approach for creating steady-state entanglement between two microwave fields in a four-mode hybrid cavity optomechanical system. The entanglement can be achieved by combining the processes of three beam-splitter interactions and two parametric-amplifier interactions. Due to the dissipation-driven and cavity cooling processes, the entanglement obtained can go far beyond the entanglement limit based on coherent parametric coupling. Moreover, our proposal allows the engineered bath to cool both Bogoliubov modes almost simultaneously. In this way, a highly pure and strongly entangled steady state of two microwave modes is obtained. Our finding may be significant for using the hybrid opto-electro-mechanical system fabricated on chips in various quantum tasks, where the strong and pure entanglement is an important resource.

Extended topological valley-locked surface acoustic waves

Stable and efficient guided waves are essential for information transmission and processing. Recently, topological valley-contrasting materials in condensed matter systems have been revealed as promising infrastructures for guiding classical waves, for they can provide broadband, non-dispersive and reflection-free electromagnetic/mechanical wave transport with a high degree of freedom. In this work, by designing and manufacturing miniaturized phononic crystals on a semi-infinite substrate, we experimentally realized a valley-locked edge transport for surface acoustic waves (SAWs). Critically, original one-dimensional edge transports could be extended to quasi-two-dimensional ones by doping SAW Dirac “semimetal” layers at the boundaries. We demonstrate that SAWs in the extended topological valley-locked edges are robust against bending and wavelength-scaled defects. Also, this mechanism is configurable and robust depending on the doping, offering various on-chip acoustic manipulation, e.g., SAW routing, focusing, splitting, and converging, all flexible and high-flow. This work may promote future hybrid phononic circuits for acoustic information processing, sensing, and manipulation.

Tunable microwave-optical entanglement and conversion in multimode electro-opto-mechanics

We study tunable double-channel microwave-optical (M-O) entanglement and coherent conversion by controlling the quantum interference effect. This is realized in a two-mechanical-mode electro-opto-mechanical (EOM) system, in which two mechanical resonators (MRs) are coupled with each other by phase-dependent phonon-phonon interaction, and link the interaction between the microwave and optical cavity. It's demonstrated that the mechanical coupling between two MRs leads to the interference of two pathways of electro-opto-mechanical interaction, which can generate the tunable double-channel phenomena in comparison with a typical three-mode EOM system. In particular, by tuning of phonon-phonon interaction and couplings between cavities with MRs, we can not only steer the switch from the M-O interaction with a single channel to that of the double-channel, but also modulate the entanglement and conversion characteristics in each channel. Moreover, our scheme can be extended to an N-mechanical-mode EOM system, in which N discrete channels will be observed and controlled. This study opens up prospects for quantum information transduction and storage with a wide bandwidth and multichannel quantum interface.

Room-Temperature Silicon Platform for GHz-Frequency Nanoelectro-Opto-Mechanical Systems

Nanoelectro-opto-mechanical systems enable the synergistic coexistence of electrical, mechanical, and optical signals on a chip to realize new functions. Most of the technology platforms proposed for the fabrication of these systems so far are not fully compatible with the mainstream CMOS technology, thus, hindering the mass-scale utilization. We have developed a CMOS technology platform for nanoelectro-opto-mechanical systems that includes piezoelectric interdigitated transducers for electronic driving of mechanical signals and nanocrystalline silicon nanobeams for an enhanced optomechanical interaction. Room-temperature operation of devices at 2 GHz and with peak sensitivity down to 2.6 cavity phonons is demonstrated. Our proof-of-principle technology platform can be integrated and interfaced with silicon photonics, electronics, and MEMS devices and may enable multiple functions for coherent signal processing in the classical and quantum domains.

Continuous-wave frequency upconversion with a molecular optomechanical nanocavity

[Figure: see text].

Strong optomechanical coupling in chain-like waveguides of silicon nanoparticles with quasi-bound states in the continuum

We propose and demonstrate that strong optomechanical coupling can be achieved in a chain-like waveguide consisting of silicon nanorods. By employing quasi-bound states in the continuum and mechanical resonances at a frequency around 10 GHz, the optomechanical coupling rate can be above 2 MHz and surpass most microcavities. We have also studied cases with different optical wave numbers and size parameters of silicon, and a robust coupling rate has been verified, benefiting the experimental measurements and practical applications. The proposed silicon chain-like waveguide of strong optomechanical coupling may pave new ways for research on photon-phonon interaction with microstructures.

Buckling-Mediated Phase Transitions in Nano-Electromechanical Phononic Waveguides

Waveguides for mechanical signal transmission in the megahertz to gigahertz regimes enable on-chip phononic circuitry, which brings new capabilities complementing photonics and electronics. Lattices of coupled nano-electromechanical drumhead resonators are suitable for these waveguides due to their high Q-factor and precisely engineered band structure. Here, we show that thermally induced elastic buckling of such resonators causes a phase transition in the waveguide leading to reversible control of signal transmission. Specifically, when cooled, the lowest-frequency transmission band associated with the primary acoustic mode vanishes. Experiments show the merging of the lower and upper band gaps, such that signals remain localized at the excitation boundary. Numerical simulations show that the temperature-induced destruction of the pass band is a result of inhomogeneous elastic buckling, which disturbs the waveguide's periodicity and suppresses the wave propagation. Mechanical phase transitions in waveguides open opportunities for drastic phononic band reconfiguration in on-chip circuitry and computing.

Optically Heralded Entanglement of Superconducting Systems in Quantum Networks

Networking superconducting quantum computers is a longstanding challenge in quantum science. The typical approach has been to cascade transducers: converting to optical frequencies at the transmitter and to microwave frequencies at the receiver. However, the small microwave-optical coupling and added noise have proven formidable obstacles. Instead, we propose optical networking via heralding end-to-end entanglement with one detected photon and teleportation. This new protocol can be implemented on standard transduction hardware while providing significant performance improvements over transduction. In contrast to cascaded direct transduction, our scheme absorbs the low optical-microwave coupling efficiency into the heralding step, thus breaking the rate-fidelity trade-off. Moreover, this technique unifies and simplifies entanglement generation between superconducting devices and other physical modalities in quantum networks.

Bidirectional interconversion of microwave and light with thin-film lithium niobate

Superconducting cavity electro-optics presents a promising route to coherently convert microwave and optical photons and distribute quantum entanglement between superconducting circuits over long-distance. Strong Pockels nonlinearity and high-performance optical cavity are the prerequisites for high conversion efficiency. Thin-film lithium niobate (TFLN) offers these desired characteristics. Despite significant recent progresses, only unidirectional conversion with efficiencies on the order of 10-5 has been realized. In this article, we demonstrate the bidirectional electro-optic conversion in TFLN-superconductor hybrid system, with conversion efficiency improved by more than three orders of magnitude. Our air-clad device architecture boosts the sustainable intracavity pump power at cryogenic temperatures by suppressing the prominent photorefractive effect that limits cryogenic performance of TFLN, and reaches an efficiency of 1.02% (internal efficiency of 15.2%). This work firmly establishes the TFLN-superconductor hybrid EO system as a highly competitive transduction platform for future quantum network applications.

Observation of Acoustic Charge Transport in GaN-Based Quantum Well Structures Under Surface Acoustic Wave Excitations

Though the acoustoelectric and acoustooptic interactions have been widely studied on III-V semiconductors, most studies were conducted at low temperature to avoid the influence of lattice scattering. Here, we demonstrate larger-than-1-GHz optical oscillation and acoustic charge transport at room temperature from a nitride-based LED (light-emitting diode) by acoustic wave excitation. The optical oscillation is generated by the harmonics of acoustic waves, while the acoustic transport of carriers was observed from the LED light output at different acoustic excitation frequencies. Furthermore, with the change of bias voltage, the frequency response of light output varies correspondingly due to the thermal disturbance that affects the lattice vibration and acoustic wave propagation. The results also suggest that we are able to achieve a tunable optical resonant frequency by varying bias voltages without changing the LED structure.

High-performance phoxonic cavity designs for enhanced acousto-optical interaction

Effective confinement of light and sound is achieved through a one-dimensional phoxonic crystal (PxC) cavity. In particular, co-localization of gigahertz phonons and infrared photons in a cavity created by introducing a defect inside a multilayer PxC has been performed. The incident elastic waves can control the refractive index variation of the dual phononic-photonic cavity layer. We also studied the acousto-optic (AO) effect in four AO materials, each located in the cavity layer between two identical Bragg mirrors. The cavities are designed to have high-quality factors for both photon and phonon resonances, which are proportional to their lifetime and allow for a much stronger photon-phonon interaction. The AO effect causes a shift in the optical mode of the photonic band gap. The values of the refractive index of the AO cavities layer are estimated as a function of time based on the elastic strain perturbation using the relevant photo-elastic relations. The phoxonic band gaps and transmission spectra for both unperturbed and elastically perturbed PxC structures are derived depending on the transfer matrix method. In our results, the selected AO cavity of PbMoO₄ provided the strongest AO coupling, in which the maximum wavelength shift of the resonant photonic modes reached 113.3 nm. In addition, 11.9 nm is the maximum displacement amplitude of the confinement elastic wave of the same nanocavity. The TeO₂ cavity provided the highest Q values for both photonic and phononic modes of 7093 and 175, respectively. We think this research could open the way to study the properties of linear elastic materials to design extremely miniaturized AO devices.

Tunable Graphene Phononic Crystal

In the field of phononics, periodic patterning controls vibrations and thereby the flow of heat and sound in matter. Bandgaps arising in such phononic crystals (PnCs) realize low-dissipation vibrational modes and enable applications toward mechanical qubits, efficient waveguides, and state-of-the-art sensing. Here, we combine phononics and two-dimensional materials and explore tuning of PnCs via applied mechanical pressure. To this end, we fabricate the thinnest possible PnC from monolayer graphene and simulate its vibrational properties. We find a bandgap in the megahertz regime within which we localize a defect mode with a small effective mass of 0.72 ag = 0.002 m_physical. We exploit graphene's flexibility and simulate mechanical tuning of a finite size PnC. Under electrostatic pressure up to 30 kPa, we observe an upshift in frequency of the entire phononic system by ∼350%. At the same time, the defect mode stays within the bandgap and remains localized, suggesting a high-quality, dynamically tunable mechanical system.

Observation of 990-MHz Optical Oscillation From Light Emitters Excited by High-Order Harmonics of Surface Acoustic Waves

Optomechanical properties have been widely explored on the interactions between phonon, photon, and electrons. The applications range from acoustic filters for mobile handsets to quantum information science./However, up to date, the interaction between harmonic modes of surface acoustic waves (SAWs) and photons has not been studied in detail. Here, we develop radio frequency (RF) - modulated light emitters driven by the coupling between electrical and acoustic signals at room temperature. The light emitter demonstrates a 990-MHz oscillation behavior which cannot be solely achieved by electrical driving due to resistance-capacitance (RC) limit. Instead, the result is attributed to the excitation by the harmonics of SAWs in the light emitter. The ~gigahertz light oscillation enables a new architecture for information processing. In this work, we also demonstrate the coupling between acoustooptical and electrooptical interactions by simultaneously applying 990-MHz acoustic signals and 20-MHz modulated electrical inputs.

Critical couplings in topological-insulator waveguide-resonator systems observed in elastic waves

Waveguides and resonators are core components in the large-scale integration of electronics, photonics and phononics, both in existing and future scenarios. In certain situations, there is critical coupling of the two components; i.e. no energy passes through the waveguide after the incoming wave couples into the resonator. The transmission spectral characteristics resulting from this phenomenon are highly advantageous for signal filtering, switching, multiplexing and sensing. In the present study, adopting an elastic-wave platform, we introduce topological insulator (TI), a remarkable achievement in condensed matter physics over the past decade, into a classical waveguide-ring-resonator configuration. Along with basic similarities with classical systems, a TI system has important differences and advantages, mostly owing to the spin-momentum locked transmission states at the TI boundaries. As an example, a two-port TI waveguide resonator can fundamentally eliminate upstream reflections while completely retaining useful transmission spectral characteristics, and maximize the energy in the resonator, with possible applications being novel signal processing, gyro/sensing, lasering, energy harvesting and intense wave-matter interactions, using phonons, photons or even electrons. The present work further enhances confidence in using topological protection for practical device performance and functionalities, especially considering the crucial advantage of introducing (pseudo)spins to existing conventional configurations. More in-depth research on advancing phononics/photonics, especially on-chip, is foreseen.

Impact of the central frequency of environment on non-Markovian dynamics in piezoelectric optomechanical devices

The piezoelectric optomechanical devices supply a promising experimental platform to realize the coherent and effective control and measurement of optical circuits working in Terahertz (THz) frequencies via superconducting electron devices typically working in Radio (MHz) frequencies. However, quantum fluctuations are unavoidable when the size of mechanical oscillators enter into the nanoscale. The consequences of the noisy environment are still challenging due to the lack of analytical tools. In this paper, a semi-classical and full-quantum model of piezoelectric optomechanical systems coupled to a noisy bosonic quantum environment are introduced and solved in terms of quantum-state diffusion (QSD) trajectories in the non-Markovian regime. We show that the noisy environment, particularly the central frequency of the environment, can enhance the entanglement generation between optical cavities and LC circuits in some parameter regimes. Moreover, we observe the critical points in the coefficient functions, which can lead the different behaviors in the system. Besides, we also witness the entanglement transfers between macroscopic objects due to the memory effect of the environment. Our work can be applied in the fields of electric/ optical switches, and long-distance distribution in a large-scale quantum network.

Hybrid Integration of Silicon Photonic Devices on Lithium Niobate for Optomechanical Wavelength Conversion

The rapid development of quantum information processors has accelerated the demand for technologies that enable quantum networking. One promising approach uses mechanical resonators as an intermediary between microwave and optical fields. Signals from a superconducting, topological, or spin qubit processor can then be converted coherently to optical states at telecom wavelengths. However, current devices built from homogeneous structures suffer from added noise and a small conversion efficiency. Combining advantageous properties of different materials into a heterogeneous design should allow for superior quantum transduction devices-so far these hybrid approaches have however been hampered by complex fabrication procedures. Here we present a novel integration method, based on previous pick-and-place ideas, that can combine independently fabricated device components of different materials into a single device. The method allows for a precision alignment by continuous optical monitoring during the process. Using our method, we assemble a hybrid silicon-lithium niobate device with state-of-the-art wavelength conversion characteristics.

Integrated optical isolators using electrically driven acoustic waves

We propose and investigate the performance of integrated photonic isolators based on non-reciprocal mode conversion facilitated by unidirectional, traveling acoustic waves. A triply-guided waveguide system on-chip, comprising two optical modes and an electrically-driven acoustic mode, facilitates the non-reciprocal mode conversion and is combined with spatial mode filters to create the isolator. The co-guided and co-traveling arrangement enables isolation with no additional optical loss, without magnetic-optic materials, and with low power consumption. The approach is theoretically evaluated with simulations predicting over 20 dB of isolation and 2.6 dB of insertion loss with a 370 GHz optical bandwidth and 1 cm device length. The isolator uses only 1 mW of electrical drive power, an improvement of 1-3 orders of magnitude over the state of the art. The electronic drive and lack of magneto-optic materials suggest the potential for straightforward integration with drive circuits, including in monolithic CMOS electronic-photonic platforms, enabling a fully contained 'black box' optical isolator with two optical ports and DC electrical power.

Mode multiplexer for guided optical and acoustic waves

Integrated acousto-optic (AO) devices utilize the strong overlap of acoustic and optical fields in a waveguide to facilitate efficient photon-phonon (Brillouin) interactions. For example, acoustic waves offer a lossless modulation mechanism for light. "Brillouin active" photonic platforms are currently being developed that may see optical, acoustic, and AO waveguide circuits on the same chip, where guided light and sound come together in active interaction regions. A key missing component for such a platform is a device that can multiplex modes across these two physical domains. We propose and describe a new class of optical and acoustic components, the "acoustic-optical mode multiplexer" (AOMM), a device that takes respective optical and acoustic waveguides as input ports and couples their excited guided modes into a single, joint output waveguide. We show an example suspended silicon-silicon dioxide design that combines two optical modes and a spatially separate acoustic mode into a single, co-guided output port with low insertion loss down to 0.3 dB for both optical and acoustic modes, and reflection below -20dB and -11dB, respectively. The AOMM may enable new, efficient integrated AO devices, such as isolators and circulators, where the acoustic wave generation and opto-acoustic interaction are separated.

Phononic Coupled-Resonator Waveguide Micro-Cavities

Phononic coupled-resonator waveguide cavities are formed by a finite chain of defects in a complete bandgap phononic crystal slab. The sample is machined in a fused silica plate by femtosecond printing to form an array of cross-shape holes. The collective resonance of the phononic cavities, in the Megahertz frequency range, are excited by a piezoelectric vibrator and imaged by laser Doppler vibrometry. It is found that well-defined resonant cavity modes can be efficiently excited, even though the phononic cavities are distant by a few lattice spacings and are only weakly coupled through evanescent elastic waves. The results suggest the possibility of engineering the dynamical response of a set of coupled phononic cavities by an adequate layout of defects in a phononic crystal slab.

Detecting Acoustic Blackbody Radiation with an Optomechanical Antenna

Nanomechanical systems are generally embedded in a macroscopic environment where the sources of thermal noise are difficult to pinpoint. We engineer a silicon nitride membrane optomechanical resonator such that its thermal noise is acoustically driven by a spatially well-defined remote macroscopic bath. This bath acts as an acoustic blackbody emitting and absorbing acoustic radiation through the silicon substrate. Our optomechanical system acts as a sensitive detector for the blackbody temperature and for photoacoustic imaging. We demonstrate that the nanomechanical mode temperature is governed by the blackbody temperature and not by the local material temperature of the resonator. Our work presents a route to mitigate self-heating effects in optomechanical thermometry and other quantum optomechanics experiments, as well as acoustic communication in quantum information.

Integrated microwave acousto-optic frequency shifter on thin-film lithium niobate

Electrically driven acousto-optic devices that provide beam deflection and optical frequency shifting have broad applications from pulse synthesis to heterodyne detection. Commercially available acousto-optic modulators are based on bulk materials and consume Watts of radio frequency power. Here, we demonstrate an integrated 3-GHz acousto-optic frequency shifter on thin-film lithium niobate, featuring a carrier suppression over 30 dB. Further, we demonstrate a gigahertz-spaced optical frequency comb featuring more than 200 lines over a 0.6-THz optical bandwidth by recirculating the light in an active frequency shifting loop. Our integrated acousto-optic platform leads to the development of on-chip optical routing, isolation, and microwave signal processing.

Two-dimensional optomechanical crystal cavity with high quantum cooperativity

Optomechanical systems offer new opportunities in quantum information processing and quantum sensing. Many solid-state quantum devices operate at millikelvin temperatures—however, it has proven challenging to operate nanoscale optomechanical devices at these ultralow temperatures due to their limited thermal conductance and parasitic optical absorption. Here, we present a two-dimensional optomechanical crystal resonator capable of achieving large cooperativity C and small effective bath occupancy n_b, resulting in a quantum cooperativity C_eff ≡ C/n_b > 1 under continuous-wave optical driving. This is realized using a two-dimensional phononic bandgap structure to host the optomechanical cavity, simultaneously isolating the acoustic mode of interest in the bandgap while allowing heat to be removed by phonon modes outside of the bandgap. This achievement paves the way for a variety of applications requiring quantum-coherent optomechanical interactions, such as transducers capable of bi-directional conversion of quantum states between microwave frequency superconducting quantum circuits and optical photons in a fiber optic network.

The authors demonstrate a two-dimensional optomechanical crystal cavity which traps a phonon mode within a phononic bandgap while yielding large thermal conductivity to the environment. High quantum cooperativity at millikelvin temperatures is realized, suitable for quantum coherent control.

Electromagnetically Induced Acoustic Transparency with a Superconducting Circuit

We report the observation of electromagnetically induced transparency (EIT) of a mechanical field, where a superconducting artificial atom is coupled to a 1D-transmission line for surface acoustic waves. An electromagnetic microwave drive is used as the control field, rendering the superconducting transmon qubit transparent to the acoustic probe beam. The strong frequency dependence of the acoustic coupling enables EIT in a ladder configuration due to the suppressed relaxation of the upper level. Our results show that superconducting circuits can be engineered to interact with acoustic fields in parameter regimes not readily accessible to purely electromagnetic systems.

Two-colour interferometry and switching through optomechanical dark mode excitation

Efficient switching and routing of photons of different wavelengths is a requirement for realizing a quantum internet. Multimode optomechanical systems can solve this technological challenge and enable studies of fundamental science involving widely separated wavelengths that are inaccessible to single-mode optomechanical systems. To this end, we demonstrate interference between two optomechanically induced transparency processes in a diamond on-chip cavity. This system allows us to directly observe the dynamics of an optomechanical dark mode that interferes photons at different wavelengths via their mutual coupling to a common mechanical resonance. This dark mode does not transfer energy to the dissipative mechanical reservoir and is predicted to enable quantum information processing applications that are insensitive to mechanical decoherence. Control of the dark mode is also utilized to demonstrate all-optical, two-colour switching and interference with light separated by over 5 THz in frequency.

A Chip-Scale Oscillation-Mode Optomechanical Inertial Sensor Near the Thermodynamical Limits

Modern navigation systems integrate the global positioning system (GPS) with an inertial navigation system (INS), which complement each other for correct attitude and velocity determination. The core of the INS integrates accelerometers and gyroscopes used to measure forces and angular rate in the vehicular inertial reference frame. With the help of gyroscopes and by integrating the acceleration to compute velocity and distance, precision and compact accelerometers with sufficient accuracy can provide small-error location determination. Solid-state implementations, through coherent readout, can provide a platform for high performance acceleration detection. In contrast to prior accelerometers using piezoelectric or capacitive readout techniques, optical readout provides narrow-linewidth high-sensitivity laser detection along with low-noise resonant optomechanical transduction near the thermodynamical limits. Here an optomechanical inertial sensor with an 8.2 μg Hz-1/2 velocity random walk (VRW) at an acquisition rate of 100 Hz and 50.9 μg bias instability is demonstrated, suitable for applications, such as, inertial navigation, inclination sensing, platform stabilization, and/or wearable device motion detection. Driven into optomechanical sustained-oscillation, the slot photonic crystal cavity provides radio-frequency readout of the optically-driven transduction with an enhanced 625 μg Hz-1 sensitivity. Measuring the optomechanically-stiffened oscillation shift, instead of the optical transmission shift, provides a 220× VRW enhancement over pre-oscillation mode detection.

Suspended gallium arsenide platform for building large scale photonic integrated circuits: passive devices

The spectacular success of silicon-based photonic integrated circuits (PICs) in the past decade naturally begs the question of whether similar fabrication procedures can be applied to other material platforms with more desirable optical properties. In this work, we demonstrate the individual passive components (grating couplers, waveguides, multi-mode interferometers and ring resonators) necessary for building large scale integrated circuits in suspended gallium arsenide (GaAs). Implementing PICs in suspended GaAs is a viable route towards achieving optimal system performance in areas with stringent device constraints like energy efficient transceivers for exascale systems, integrated electro-optic comb lasers, integrated quantum photonics, cryogenic photonics and electromechanical guided wave acousto-optics.