1
|
Wu X, Min S, Zhan T, Huang Y, Niu H, Xu B. Humidity-enhanced microfluidic plasma separation on Chinese Xuan-papers. LAB ON A CHIP 2024. [PMID: 39157919 DOI: 10.1039/d4lc00393d] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 08/20/2024]
Abstract
The first step in blood testing necessitates blood separation to obtain an adequate volume of plasma. Traditional centrifugation is bulky, expensive and electricity-powered, which is not suitable for micro-scale blood plasma separation in point-of-care testing (POCT) cases. Microfluidic paper-based plasma separation devices present a promising alternative for plasma separation in such occasions. However, they are limited in terms of plasma yield, which hinders analyte detection. Herein, we proposed a humidity-enhanced paper-based microfluidic plasma separation method to address this issue. Specifically, paper was first treated by blood-typing antibodies, then samples of whole blood were introduced into the prepared paper. After waiting for 5 min for RBC agglutination and plasma wicking under high humidity, micro-scale plasma separation from whole blood was achieved. As a result, an extremely high plasma yield of up to 60.1% could be separated from whole blood through using Xuan-paper. Meanwhile, the purity of plasma could reach 99.99%. Finally, this innovative approach was effortlessly integrated into distance-based glucose concentration detection, enabling rapid determination of blood glucose levels through naked-eye observation. Considering the simplicity and inexpensiveness of this method, we believe that this technology could be integrated to more paper-based microfluidic analytical devices for rapid and accurate detection of plasma analytes in POCT.
Collapse
Affiliation(s)
- Xianchang Wu
- School of Mechanical Engineering, Suzhou University of Science and Technology, Suzhou, 215009, China.
| | - Shuqiang Min
- School of Mechanical Engineering, Suzhou University of Science and Technology, Suzhou, 215009, China.
| | - Tonghuan Zhan
- School of Mechanical Engineering, Suzhou University of Science and Technology, Suzhou, 215009, China.
| | - Yange Huang
- School of Mechanical Engineering, Suzhou University of Science and Technology, Suzhou, 215009, China.
| | - Hui Niu
- Department of Pathology, The Second Affiliated Hospital of Soochow, Suzhou, 215000, China
| | - Bing Xu
- School of Mechanical Engineering, Suzhou University of Science and Technology, Suzhou, 215009, China.
| |
Collapse
|
2
|
Li S, Zhang Y, Liu J, Wang X, Qian C, Wang J, Wu L, Dai C, Yuan H, Wan C, Li J, Du W, Feng X, Li Y, Chen P, Liu BF. Fully Integrated and High-Throughput Microfluidic System for Multiplexed Point-Of-Care Testing. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2024:e2401848. [PMID: 38940626 DOI: 10.1002/smll.202401848] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/07/2024] [Revised: 06/19/2024] [Indexed: 06/29/2024]
Abstract
For every epidemic outbreak, the prevention and treatments in resource-limited areas are always out of reach. Critical to this is that high accuracy, stability, and more comprehensive analytical techniques always rely on expensive and bulky instruments and large laboratories. Here, a fully integrated and high-throughput microfluidic system is proposed for ultra-multiple point-of-care immunoassay, termed Dac system. Specifically, the Dac system only requires a handheld portable device to automatically recycle repetitive multi-step reactions including on-demand liquid releasing, dispensing, metering, collecting, oscillatory mixing, and discharging. The Dac system performs high-precision enzyme-linked immunosorbent assays for up to 17 samples or targets simultaneously on a single chip. Furthermore, reagent consumption is only 2% compared to conventional ELISA, and microbubble-accelerated reactions shorten the assay time by more than half. As a proof of concept, the multiplexed detections are achieved by detecting at least four infection targets for two samples simultaneously on a singular chip. Furthermore, the barcode-based multi-target results can rapidly distinguish between five similar cases, allowing for accurate therapeutic interventions. Compared to bulky clinical instruments, the accuracy of clinical inflammation classification is 92.38% (n = 105), with a quantitative correlation coefficient of R2 = 0.9838, while the clinical specificity is 100% and the sensitivity is 98.93%.
Collapse
Affiliation(s)
- Shunji Li
- The Key Laboratory for Biomedical Photonics of MOE at Wuhan National Laboratory for Optoelectronics Hubei Bioinformatics & Molecular Imaging Key Laboratory, Systems Biology Theme, Department of Biomedical Engineering, College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan, 430074, China
| | - Ying Zhang
- The Key Laboratory for Biomedical Photonics of MOE at Wuhan National Laboratory for Optoelectronics Hubei Bioinformatics & Molecular Imaging Key Laboratory, Systems Biology Theme, Department of Biomedical Engineering, College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan, 430074, China
| | - Jingxuan Liu
- The Key Laboratory for Biomedical Photonics of MOE at Wuhan National Laboratory for Optoelectronics Hubei Bioinformatics & Molecular Imaging Key Laboratory, Systems Biology Theme, Department of Biomedical Engineering, College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan, 430074, China
| | - Xing Wang
- The Key Laboratory for Biomedical Photonics of MOE at Wuhan National Laboratory for Optoelectronics Hubei Bioinformatics & Molecular Imaging Key Laboratory, Systems Biology Theme, Department of Biomedical Engineering, College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan, 430074, China
| | - Chungen Qian
- Department of Reagent Research and Development, Shenzhen YHLO Biotech Co., Ltd., Shenzhen, 518000, China
| | - Jingjing Wang
- Department of Reagent Research and Development, Shenzhen YHLO Biotech Co., Ltd., Shenzhen, 518000, China
| | - Liqiang Wu
- Department of Reagent Research and Development, Shenzhen YHLO Biotech Co., Ltd., Shenzhen, 518000, China
| | - Chenxi Dai
- The Key Laboratory for Biomedical Photonics of MOE at Wuhan National Laboratory for Optoelectronics Hubei Bioinformatics & Molecular Imaging Key Laboratory, Systems Biology Theme, Department of Biomedical Engineering, College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan, 430074, China
| | - Huijuan Yuan
- The Key Laboratory for Biomedical Photonics of MOE at Wuhan National Laboratory for Optoelectronics Hubei Bioinformatics & Molecular Imaging Key Laboratory, Systems Biology Theme, Department of Biomedical Engineering, College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan, 430074, China
| | - Chao Wan
- The Key Laboratory for Biomedical Photonics of MOE at Wuhan National Laboratory for Optoelectronics Hubei Bioinformatics & Molecular Imaging Key Laboratory, Systems Biology Theme, Department of Biomedical Engineering, College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan, 430074, China
| | - Jiashuo Li
- The Key Laboratory for Biomedical Photonics of MOE at Wuhan National Laboratory for Optoelectronics Hubei Bioinformatics & Molecular Imaging Key Laboratory, Systems Biology Theme, Department of Biomedical Engineering, College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan, 430074, China
| | - Wei Du
- The Key Laboratory for Biomedical Photonics of MOE at Wuhan National Laboratory for Optoelectronics Hubei Bioinformatics & Molecular Imaging Key Laboratory, Systems Biology Theme, Department of Biomedical Engineering, College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan, 430074, China
| | - Xiaojun Feng
- The Key Laboratory for Biomedical Photonics of MOE at Wuhan National Laboratory for Optoelectronics Hubei Bioinformatics & Molecular Imaging Key Laboratory, Systems Biology Theme, Department of Biomedical Engineering, College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan, 430074, China
| | - Yiwei Li
- The Key Laboratory for Biomedical Photonics of MOE at Wuhan National Laboratory for Optoelectronics Hubei Bioinformatics & Molecular Imaging Key Laboratory, Systems Biology Theme, Department of Biomedical Engineering, College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan, 430074, China
| | - Peng Chen
- The Key Laboratory for Biomedical Photonics of MOE at Wuhan National Laboratory for Optoelectronics Hubei Bioinformatics & Molecular Imaging Key Laboratory, Systems Biology Theme, Department of Biomedical Engineering, College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan, 430074, China
| | - Bi-Feng Liu
- The Key Laboratory for Biomedical Photonics of MOE at Wuhan National Laboratory for Optoelectronics Hubei Bioinformatics & Molecular Imaging Key Laboratory, Systems Biology Theme, Department of Biomedical Engineering, College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan, 430074, China
| |
Collapse
|
3
|
Zhang Y, Li J, Jiao S, Li Y, Zhou Y, Zhang X, Maryam B, Liu X. Microfluidic sensors for the detection of emerging contaminants in water: A review. THE SCIENCE OF THE TOTAL ENVIRONMENT 2024; 929:172734. [PMID: 38663621 DOI: 10.1016/j.scitotenv.2024.172734] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/22/2023] [Revised: 03/22/2024] [Accepted: 04/22/2024] [Indexed: 04/29/2024]
Abstract
In recent years, numerous emerging contaminants have been identified in surface water, groundwater, and drinking water. Developing novel sensing methods for detecting diverse emerging pollutants in water is urgently needed, as even at low concentrations, these pollutants can pose a serious threat to human health and environmental safety. Traditional testing methods are based on laboratory equipment, which is highly sensitive but complex to operate, costly, and not suitable for on-site monitoring. Microfluidic sensors offer several benefits, including rapid evaluation, minimal sample usage, accurate liquid manipulation, compact size, automation, and in-situ detection capabilities. They provide promising and efficient analytical tools for high-performance sensing platforms in monitoring emerging contaminants in water. In this paper, recent research advances in microfluidic sensors for the detection of emerging contaminants in water are reviewed. Initially, a concise overview is provided about the various substrate materials, corresponding microfabrication techniques, different driving forces, and commonly used detection techniques for microfluidic devices. Subsequently, a comprehensive analysis is conducted on microfluidic detection methods for endocrine-disrupting chemicals, pharmaceuticals and personal care products, microplastics, and perfluorinated compounds. Finally, the prospects and future challenges of microfluidic sensors in this field are discussed.
Collapse
Affiliation(s)
- Yihao Zhang
- School of Environmental Science and Engineering, Tianjin University, Tianjin 300354, China
| | - Jiaxuan Li
- School of Environmental Science and Engineering, Tianjin University, Tianjin 300354, China
| | - Shipu Jiao
- School of Environmental Science and Engineering, Tianjin University, Tianjin 300354, China
| | - Yang Li
- School of Environmental Science and Engineering, Tianjin University, Tianjin 300354, China
| | - Yu Zhou
- School of Environmental Science and Engineering, Tianjin University, Tianjin 300354, China
| | - Xu Zhang
- School of Environmental Science and Engineering, Tianjin University, Tianjin 300354, China
| | - Bushra Maryam
- School of Environmental Science and Engineering, Tianjin University, Tianjin 300354, China
| | - Xianhua Liu
- School of Environmental Science and Engineering, Tianjin University, Tianjin 300354, China.
| |
Collapse
|
4
|
Szechyńska-Hebda M, Hebda M, Doğan-Sağlamtimur N, Lin WT. Let's Print an Ecology in 3D (and 4D). MATERIALS (BASEL, SWITZERLAND) 2024; 17:2194. [PMID: 38793260 PMCID: PMC11122764 DOI: 10.3390/ma17102194] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/29/2024] [Revised: 05/01/2024] [Accepted: 05/04/2024] [Indexed: 05/26/2024]
Abstract
The concept of ecology, historically rooted in the economy of nature, currently needs to evolve to encompass the intricate web of interactions among humans and various organisms in the environment, which are influenced by anthropogenic forces. In this review, the definition of ecology has been adapted to address the dynamic interplay of energy, resources, and information shaping both natural and artificial ecosystems. Previously, 3D (and 4D) printing technologies have been presented as potential tools within this ecological framework, promising a new economy for nature. However, despite the considerable scientific discourse surrounding both ecology and 3D printing, there remains a significant gap in research exploring the interplay between these directions. Therefore, a holistic review of incorporating ecological principles into 3D printing practices is presented, emphasizing environmental sustainability, resource efficiency, and innovation. Furthermore, the 'unecological' aspects of 3D printing, disadvantages related to legal aspects, intellectual property, and legislation, as well as societal impacts, are underlined. These presented ideas collectively suggest a roadmap for future research and practice. This review calls for a more comprehensive understanding of the multifaceted impacts of 3D printing and the development of responsible practices aligned with ecological goals.
Collapse
Affiliation(s)
| | - Marek Hebda
- Faculty of Materials Engineering and Physics, Cracow University of Technology, Warszawska 24, 31-155 Kraków, Poland;
| | | | - Wei-Ting Lin
- Department of Civil Engineering, National Ilan University, No. 1, Sec. 1, Shennong Rd., I-Lan 260, Taiwan;
| |
Collapse
|
5
|
Gupta A, Yu J, Challita EJ, Standeven J, Bhamla MS. OpenCell: A low-cost, open-source, 3-in-1 device for DNA extraction. PLoS One 2024; 19:e0298857. [PMID: 38696375 PMCID: PMC11065270 DOI: 10.1371/journal.pone.0298857] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/21/2023] [Accepted: 02/01/2024] [Indexed: 05/04/2024] Open
Abstract
High-cost DNA extraction procedures pose significant challenges for budget-constrained laboratories. To address this, we introduce OpenCell, an economical, open-source, 3-in-1 laboratory device that combines the functionalities of a bead homogenizer, a microcentrifuge, and a vortex mixer. OpenCell utilizes modular attachments that magnetically connect to a central rotating brushless motor. This motor couples to an epicyclic gearing mechanism, enabling efficient bead homogenization, vortex mixing, and centrifugation within one compact unit. OpenCell's design incorporates multiple redundant safety features, ensuring both the device's and operator's safety. Additional features such as RPM measurement, programmable timers, battery operation, and optional speed control make OpenCell a reliable and reproducible laboratory instrument. In our study, OpenCell successfully isolated DNA from Spinacia oleracea (spinach), with an average yield of 2.3 μg and an A260/A280 ratio of 1.77, demonstrating its effectiveness for downstream applications such as Polymerase Chain Reaction (PCR) amplification. With its compact size (20 cm x 28 cm x 6.7 cm) and lightweight design (0.8 kg), comparable to the size and weight of a laptop, OpenCell is portable, making it an attractive component of a 'lab-in-a-backpack' for resource-constrained environments in low-and-middle-income countries and synthetic biology in remote field stations. Leveraging the accessibility of 3D printing and off-the-shelf components, OpenCell can be manufactured and assembled at a low unit cost of less than $50, providing an affordable alternative to expensive laboratory equipment costing over $4000. OpenCell aims to overcome the barriers to entry in synthetic biology research and contribute to the growing collection of frugal and open hardware.
Collapse
Affiliation(s)
- Aryan Gupta
- School of Electrical & Computer Engineering, Georgia Institute of Technology, Atlanta, GA, United States of America
| | - Justin Yu
- School of Biological Sciences, Georgia Institute of Technology, Atlanta, GA, United States of America
| | - Elio J Challita
- School of Chemical & Biomolecular Engineering, Georgia Institute of Technology, Atlanta, GA, United States of America
- George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA, United States of America
| | - Janet Standeven
- School of Chemical & Biomolecular Engineering, Georgia Institute of Technology, Atlanta, GA, United States of America
- Lambert High School, Suwanee, Georgia, United States of America
| | - M Saad Bhamla
- School of Chemical & Biomolecular Engineering, Georgia Institute of Technology, Atlanta, GA, United States of America
| |
Collapse
|
6
|
Wang B, Liu Z, Yan H, Zhang M, Li S, Li S, Duan H, Kang H, Chen P, Du W, Li Y, Feng X, Liu BF. A smartphone-based centrifugal mHealth platform implementing hollow daisy-shaped quick response chip for hematocrit measurement. Talanta 2024; 269:125398. [PMID: 37979508 DOI: 10.1016/j.talanta.2023.125398] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/01/2023] [Revised: 11/01/2023] [Accepted: 11/04/2023] [Indexed: 11/20/2023]
Abstract
Due to the ever-increasing challenge of emerging and reemerging infections on global health, the development of POCT tools has been propelled. However, conventional point-of-care testing methods suffer from several limitations, including cumbersome operation, long detection times, and low accuracy, which hamper their widespread application. Compared to traditional disease diagnostic equipment, mobile health platforms offer several advantages, including portability, ease of operation, and automated analysis of detection results through recognition algorithms. Consequently, they hold great promise for the future. Here, we developed a smartphone-based centrifugal mHealth platform implementing daisy-shaped quick response chip for hematocrit measurement. The centrifugal microfluidic chip is combined with a smartphone through a back-clip-on mobile phone adapter whose control circuit is designed with low power consumption to enable the platform to operate without requiring a high-power source that is inconvenient to carry, thereby achieving the goal of portability. Concurrently, we designed a quick response chip featuring a unique hollow daisy structure that is in line with the properties of hematocrit detection. The distinctive configuration of the chip enables adequate centrifugal force to be supplied for hematocrit detection. Additionally, our customized quick response code recognition algorithm is able to recognize this chip, facilitating non-experts in performing hematocrit intelligent recognition with their smartphones.
Collapse
Affiliation(s)
- Bangfeng Wang
- The Key Laboratory for Biomedical Photonics of MOE at Wuhan National Laboratory for Optoelectronics - Hubei Bioinformatics & Molecular Imaging Key Laboratory, Systems Biology Theme, Department of Biomedical Engineering, College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan 430074, China
| | - Zetai Liu
- The Key Laboratory for Biomedical Photonics of MOE at Wuhan National Laboratory for Optoelectronics - Hubei Bioinformatics & Molecular Imaging Key Laboratory, Systems Biology Theme, Department of Biomedical Engineering, College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan 430074, China
| | | | - Mingyu Zhang
- The Key Laboratory for Biomedical Photonics of MOE at Wuhan National Laboratory for Optoelectronics - Hubei Bioinformatics & Molecular Imaging Key Laboratory, Systems Biology Theme, Department of Biomedical Engineering, College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan 430074, China
| | - Shibo Li
- School of Cyber Science and Engineering, Zhengzhou University, Songshan lab, Zhengzhou, 450003, China
| | - Shunji Li
- The Key Laboratory for Biomedical Photonics of MOE at Wuhan National Laboratory for Optoelectronics - Hubei Bioinformatics & Molecular Imaging Key Laboratory, Systems Biology Theme, Department of Biomedical Engineering, College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan 430074, China
| | - Hufei Duan
- The Department of Life and Health, Tsinghua Shenzhen International Graduate School, China
| | - Hongjia Kang
- School of Software Engineering, Xi'an Jiaotong University, Xi'an, Shaanxi, China
| | - Peng Chen
- The Key Laboratory for Biomedical Photonics of MOE at Wuhan National Laboratory for Optoelectronics - Hubei Bioinformatics & Molecular Imaging Key Laboratory, Systems Biology Theme, Department of Biomedical Engineering, College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan 430074, China
| | - Wei Du
- The Key Laboratory for Biomedical Photonics of MOE at Wuhan National Laboratory for Optoelectronics - Hubei Bioinformatics & Molecular Imaging Key Laboratory, Systems Biology Theme, Department of Biomedical Engineering, College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan 430074, China
| | - Yiwei Li
- The Key Laboratory for Biomedical Photonics of MOE at Wuhan National Laboratory for Optoelectronics - Hubei Bioinformatics & Molecular Imaging Key Laboratory, Systems Biology Theme, Department of Biomedical Engineering, College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan 430074, China
| | - Xiaojun Feng
- The Key Laboratory for Biomedical Photonics of MOE at Wuhan National Laboratory for Optoelectronics - Hubei Bioinformatics & Molecular Imaging Key Laboratory, Systems Biology Theme, Department of Biomedical Engineering, College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan 430074, China.
| | - Bi-Feng Liu
- The Key Laboratory for Biomedical Photonics of MOE at Wuhan National Laboratory for Optoelectronics - Hubei Bioinformatics & Molecular Imaging Key Laboratory, Systems Biology Theme, Department of Biomedical Engineering, College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan 430074, China
| |
Collapse
|
7
|
Shao X, Chen Z, Yu J, Lu F, Chen S, Xu J, Yao Y, Liu B, Yang P, Jiang Q, Hu B. Ultralow-cost piezoelectric sensor constructed by thermal compression bonding for long-term biomechanical signal monitoring in chronic mental disorders. NANOSCALE 2024; 16:2974-2982. [PMID: 38258372 DOI: 10.1039/d3nr06297j] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 01/24/2024]
Abstract
Wearable bioelectronic devices, which circumvent issues related to the large size and high cost of clinical equipment, have emerged as powerful tools for the auxiliary diagnosis and long-term monitoring of chronic psychiatric diseases. Current devices often integrate multiple intricate and expensive devices to ensure accurate diagnosis. However, their high cost and complexity hinder widespread clinical application and long-term user compliance. Herein, we developed an ultralow-cost poly(vinylidene fluoride)/zinc oxide nanofiber film-based piezoelectric sensor in a thermal compression bonding process. Our piezoelectric sensor exhibits remarkable sensitivity (13.4 mV N-1), rapid response (8 ms), and exceptional stability over 2000 compression/release cycles, all at a negligibly low fabrication cost. We demonstrate that pulse wave, blink, and speech signals can be acquired by the sensor, proposing a single biomechanical modality to monitor multiple physiological traits associated with bipolar disorder. This ultralow-cost and mass-producible piezoelectric sensor paves the way for extensive long-term monitoring and immediate feedback for bipolar disorder management.
Collapse
Affiliation(s)
- Xiaodong Shao
- The Affiliated Eye Hospital of Nanjing Medical University, Nanjing Medical University, Nanjing 210029, China.
| | - Zenan Chen
- School of Biomedical Engineering and Informatics, Nanjing Medical University, Nanjing 211166, China
| | - Junxiao Yu
- The Affiliated Changzhou Second People's Hospital of Nanjing Medical University, Changzhou Second People's Hospital, Changzhou Medical Center, Nanjing Medical University, Changzhou 213161, China
| | - Fangzhou Lu
- School of Biomedical Engineering and Informatics, Nanjing Medical University, Nanjing 211166, China
| | - Shisheng Chen
- School of Biomedical Engineering and Informatics, Nanjing Medical University, Nanjing 211166, China
| | - Jingfeng Xu
- School of Biomedical Engineering and Informatics, Nanjing Medical University, Nanjing 211166, China
| | - Yihao Yao
- School of Biomedical Engineering and Informatics, Nanjing Medical University, Nanjing 211166, China
| | - Bin Liu
- School of Biomedical Engineering and Informatics, Nanjing Medical University, Nanjing 211166, China
| | - Ping Yang
- School of Materials and Engineering, Nanjing Institute of Technology, Nanjing 211167, China
| | - Qin Jiang
- The Affiliated Eye Hospital of Nanjing Medical University, Nanjing Medical University, Nanjing 210029, China.
| | - Benhui Hu
- The Affiliated Eye Hospital of Nanjing Medical University, Nanjing Medical University, Nanjing 210029, China.
- School of Biomedical Engineering and Informatics, Nanjing Medical University, Nanjing 211166, China
- Jiangsu Province Hospital, Nanjing Medical University First Affiliated Hospital, Nanjing 210029, China
| |
Collapse
|
8
|
Gupta A, Yu J, Challita EJ, Standeven J, Bhamla MS. OpenCell: A Low-cost, Open-Source, 3-in-1 device for DNA Extraction. BIORXIV : THE PREPRINT SERVER FOR BIOLOGY 2024:2023.09.18.558349. [PMID: 37808818 PMCID: PMC10557587 DOI: 10.1101/2023.09.18.558349] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/10/2023]
Abstract
High-cost DNA extraction procedures pose significant challenges for budget-constrained laboratories. To address this, we introduce OpenCell, an economical, open-source, 3-in-1 laboratory device that combines the functionalities of a bead homogenizer, a microcentrifuge, and a vortex mixer. OpenCell utilizes modular attachments that magnetically connect to a central rotating brushless motor. This motor couples to an epicyclic gearing mechanism, enabling efficient bead homogenization, vortex mixing, and centrifugation within one compact unit. OpenCell's design incorporates multiple redundant safety features, ensuring both the device's and operator's safety. Additional features such as RPM measurement, programmable timers, battery operation, and optional speed control make OpenCell a reliable and reproducible laboratory instrument. In our study, OpenCell successfully isolated DNA from Spinacia oleracea (spinach), with an average yield of 2.3 μg and an A260/A280 ratio of 1.77, demonstrating its effectiveness for downstream applications such as Polymerase Chain Reaction (PCR) amplification. With its compact size (20 cm x 28 cm x 6.7 cm) and lightweight design (0.8 kg), comparable to the size and weight of a laptop, OpenCell is portable, making it an attractive component of a 'lab-in-a-backpack' for resource-constrained environments in low-and-middle-income countries and synthetic biology in remote field stations. Leveraging the accessibility of 3D printing and off-the-shelf components, OpenCell can be manufactured and assembled at a low unit cost of less than $50, providing an affordable alternative to expensive laboratory equipment costing over $4000. OpenCell aims to overcome the barriers to entry in synthetic biology research and contribute to the growing collection of frugal and open hardware.
Collapse
Affiliation(s)
- Aryan Gupta
- School of Electrical & Computer Engineering, Georgia Institute of Technology, 777 Atlantic Drive NW, Atlanta, GA, 30332, USA
| | - Justin Yu
- School of Biological Sciences, Georgia Institute of Technology, 310 Ferst Dr NW, Atlanta, GA 30332, USA
| | - Elio J. Challita
- School of Chemical & Biomolecular Engineering, Georgia Institute of Technology, 311 Ferst Drive NW, Atlanta, GA, 30332, USA
- George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, 801 Ferst Drive NW, Atlanta, GA, 30318, USA
| | - Janet Standeven
- School of Chemical & Biomolecular Engineering, Georgia Institute of Technology, 311 Ferst Drive NW, Atlanta, GA, 30332, USA
- Lambert High School, Suwanee, Georgia, United States of America
| | - M. Saad Bhamla
- School of Chemical & Biomolecular Engineering, Georgia Institute of Technology, 311 Ferst Drive NW, Atlanta, GA, 30332, USA
| |
Collapse
|
9
|
Vloemans D, Van Hileghem L, Ordutowski H, Dal Dosso F, Spasic D, Lammertyn J. Self-Powered Microfluidics for Point-of-Care Solutions: From Sampling to Detection of Proteins and Nucleic Acids. Methods Mol Biol 2024; 2804:3-50. [PMID: 38753138 DOI: 10.1007/978-1-0716-3850-7_1] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 05/21/2024]
Abstract
Self-powered microfluidics presents a revolutionary approach to address the challenges of healthcare in decentralized and point-of-care settings where limited access to resources and infrastructure prevails or rapid clinical decision-making is critical. These microfluidic systems exploit physical and chemical phenomena, such as capillary forces and surface tension, to manipulate tiny volumes of fluids without the need for external power sources, making them cost-effective and highly portable. Recent technological advancements have demonstrated the ability to preprogram complex multistep liquid operations within the microfluidic circuit of these standalone systems, which enabled the integration of sensitive detection and readout principles. This chapter first addresses how the accessibility to in vitro diagnostics can be improved by shifting toward decentralized approaches like remote microsampling and point-of-care testing. Next, the crucial role of self-powered microfluidic technologies to enable this patient-centric healthcare transition is emphasized using various state-of-the-art examples, with a primary focus on applications related to biofluid collection and the detection of either proteins or nucleic acids. This chapter concludes with a summary of the main findings and our vision of the future perspectives in the field of self-powered microfluidic technologies and their use for in vitro diagnostics applications.
Collapse
Affiliation(s)
- Dries Vloemans
- Department of Biosystems - Biosensors Group, KU Leuven, Leuven, Belgium
| | | | - Henry Ordutowski
- Department of Biosystems - Biosensors Group, KU Leuven, Leuven, Belgium
| | | | - Dragana Spasic
- Department of Biosystems - Biosensors Group, KU Leuven, Leuven, Belgium
| | - Jeroen Lammertyn
- Department of Biosystems - Biosensors Group, KU Leuven, Leuven, Belgium.
| |
Collapse
|
10
|
Cassady KR, Minter LJ, Gruber EJ. Performance of a manually operated salad spinner centrifuge for serum separation in the healthy domestic horse (Equus caballus) and southern white rhinoceros (Ceratotherium simum). Vet Clin Pathol 2023; 52:628-637. [PMID: 37495543 DOI: 10.1111/vcp.13290] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/17/2022] [Revised: 05/30/2023] [Accepted: 07/03/2023] [Indexed: 07/28/2023]
Abstract
BACKGROUND Field veterinarians and researchers studying wild species, such as the southern white rhinoceros, often work in remote areas with limited access to standard laboratory equipment, hindering the ability to measure serum analytes. OBJECTIVES The first objective was to produce an inexpensive, manually operated centrifuge that could accept standard laboratory tubes by modifying a consumer-grade salad spinner with low-cost materials. The second objective was to compare biochemistry analysis results obtained from equine and southern white rhinoceros serum separated by traditional laboratory and manual salad spinner centrifugation. METHODS We optimized the design and serum separation protocol using non-anticoagulated equine blood. Equine and rhinoceros serum samples were separated by manual salad spinner or traditional laboratory centrifugation. Measured analytes included sodium, potassium, chloride, urea nitrogen, creatinine, phosphorous, total calcium, magnesium, glucose, total protein, albumin, globulin, creatinine kinase, aspartate aminotransferase, alanine aminotransferase, alkaline phosphatase, gamma-glutamyl transferase, total bilirubin, bicarbonate, sorbitol dehydrogenase, and triglycerides. Results obtained from serum separated by each centrifugation technique were compared by Deming regression and Bland-Altman analyses. RESULTS A tube adaptor insert modeled after a swing angle rotor and a two-step salad spinner centrifugation yielded serum comparable to traditional laboratory centrifugation. For the majority of analytes, no proportional or constant biases were detected between centrifugation methods. A positive proportional bias in the measurement of ALP in serum separated by manual centrifugation was detected in both equine and rhinoceros samples. CONCLUSIONS Manual centrifugation with a modified salad spinner yields diagnostic quality serum suitable for the measurement of most standard biochemistry analytes.
Collapse
Affiliation(s)
- Katherine R Cassady
- Department of Molecular Biomedical Sciences, North Carolina State University, Raleigh, NC, USA
| | - Larry J Minter
- Hanes Veterinary Medical Center, North Carolina Zoo, Asheboro, NC, USA
| | - Erika J Gruber
- Department of Population Medicine and Pathobiology, North Carolina State University, Raleigh, NC, USA
| |
Collapse
|
11
|
Tang D, Duan Z, Liu L, Jia Z, Lang L, Tan Y. Design and Application of Portable Centrifuge Inspired by a Hand-Powered Spinning Top. MICROMACHINES 2023; 14:1968. [PMID: 37893405 PMCID: PMC10609382 DOI: 10.3390/mi14101968] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/01/2023] [Revised: 10/17/2023] [Accepted: 10/21/2023] [Indexed: 10/29/2023]
Abstract
Traditional centrifuges, extensively employed in biology, chemistry, medicine, and other domains for tasks such as blood separation and pathogen extraction, have certain limitations. Their high cost, substantial size, and reliance on electricity restrict their range of application. Contemporary centrifuges, inspired by everyday items like paper trays and egg beaters, boast characteristics such as ease of operation, independence from electricity, and portability. These features offer unique advantages in specific situations, such as electricity shortages, inadequate infrastructure, and challenging medical conditions. Consequently, we designed a hand-powered portable centrifuge driven by pulling a rope. Our experiments revealed significant performance factors, including load capacity, rope length, and frequency of rope pulling. The results demonstrated that the revolutions per minute (RPM) of a hand-powered portable centrifuge were directly proportional to the length of the rope and the frequency of pulling, up to a certain limit, while inversely proportional to the load. When used for separating and washing polystyrene microspheres, the portable centrifuge's performance equaled that of traditional centrifuges. According to relevant calculations, this centrifuge could be capable of meeting the application of blood separation. Therefore, we believe this portable centrifuge will find meaningful applications in similar areas, particularly in resource-poor settings.
Collapse
Affiliation(s)
- Dongbao Tang
- School of Electrical Engineering, Ultra-Fast/Micro-Nano Technology and Advanced Laser Manufacturing Key Laboratory of Hunan Province, University of South China, Hengyang 421001, China; (D.T.); (L.L.); (Z.J.)
| | - Ziwei Duan
- School of Biomedical Engineering, Shenzhen Campus of Sun Yat-Sen University, Shenzhen 518107, China;
| | - Luxuan Liu
- School of Electrical Engineering, Ultra-Fast/Micro-Nano Technology and Advanced Laser Manufacturing Key Laboratory of Hunan Province, University of South China, Hengyang 421001, China; (D.T.); (L.L.); (Z.J.)
| | - Zhaoyuan Jia
- School of Electrical Engineering, Ultra-Fast/Micro-Nano Technology and Advanced Laser Manufacturing Key Laboratory of Hunan Province, University of South China, Hengyang 421001, China; (D.T.); (L.L.); (Z.J.)
| | - Lijun Lang
- Department of Computer Science and Engineering, Ho Sin-Hang Engineering Building, Chinese University of Hong Kong, Hong Kong 999077, Hong Kong SAR, China;
| | - Yuyu Tan
- School of Electrical Engineering, Ultra-Fast/Micro-Nano Technology and Advanced Laser Manufacturing Key Laboratory of Hunan Province, University of South China, Hengyang 421001, China; (D.T.); (L.L.); (Z.J.)
| |
Collapse
|
12
|
Bae CY, Esmaeili H, Zamin SA, Seol MJ, Hwang E, Beak SK, Song Y, Bharti B, Jung JP. Quantification of solution-free red blood cell staining by sorption kinetics of Romanowsky stains to agarose gels. ANALYTICAL METHODS : ADVANCING METHODS AND APPLICATIONS 2023; 15:5369-5379. [PMID: 37812186 DOI: 10.1039/d3ay01431b] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/10/2023]
Abstract
The imaging and quantification of stained red blood cells (RBCs) are important for identifying RBCs in hematology and for diagnosing diseased RBCs or parasites in cytopathology. Romanowsky staining has been used traditionally to produce hues in blood cells using a mixture of anionic eosin Y and cationic methylene blue and azure B. While Romanowsky stains have been widely used in cytopathology, end-users have experienced problems with varying results in staining due to the premature precipitation or evaporation of methanol, leading to the inherent inconsistency of solution-based Romanowsky staining. Herein, we demonstrate that the staining and destaining of blood smears are controllable by the contact time of agarose gel stamps. While the extent of staining and destaining is discernable by the hue values of stamped red blood cells in micrographs, the quantification of adsorbed and desorbed Romanowsky dye molecules (in particular, eosin Y, methylene blue and azure B) from and to the agarose gel stamps needs a model that can explain the sorption process. We found predictable sorption of the Romanowsky dye molecules from the pseudo-second-order kinetic model for adsorption and the one phase decay model for desorption. Thus, the method of agarose gel stamping demonstrated here could be an alternative to solution-based Romanowsky staining with the predictable quantity of sorption and timing of contact.
Collapse
Affiliation(s)
- Chae Yun Bae
- Noul Co., Ltd, Yongin-si, Gyeonggi-do, Republic of Korea.
| | - Hamid Esmaeili
- Department of Biological Engineering, Louisiana State University, Baton Rouge, LA, USA.
| | - Syed A Zamin
- Department of Biological Engineering, Louisiana State University, Baton Rouge, LA, USA.
| | - Min Jeong Seol
- Noul Co., Ltd, Yongin-si, Gyeonggi-do, Republic of Korea.
| | - Eunmi Hwang
- Noul Co., Ltd, Yongin-si, Gyeonggi-do, Republic of Korea.
| | - Suk Kyung Beak
- Noul Co., Ltd, Yongin-si, Gyeonggi-do, Republic of Korea.
| | - Younghoon Song
- Noul Co., Ltd, Yongin-si, Gyeonggi-do, Republic of Korea.
| | - Bhuvnesh Bharti
- Cain Department of Chemical Engineering, Louisiana State University, Baton Rouge, LA, USA
| | - Jangwook P Jung
- Department of Biological Engineering, Louisiana State University, Baton Rouge, LA, USA.
| |
Collapse
|
13
|
Hook PW, Timp W. Beyond assembly: the increasing flexibility of single-molecule sequencing technology. Nat Rev Genet 2023; 24:627-641. [PMID: 37161088 PMCID: PMC10169143 DOI: 10.1038/s41576-023-00600-1] [Citation(s) in RCA: 5] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Accepted: 03/30/2023] [Indexed: 05/11/2023]
Abstract
The maturation of high-throughput short-read sequencing technology over the past two decades has shaped the way genomes are studied. Recently, single-molecule, long-read sequencing has emerged as an essential tool in deciphering genome structure and function, including filling gaps in the human reference genome, measuring the epigenome and characterizing splicing variants in the transcriptome. With recent technological developments, these single-molecule technologies have moved beyond genome assembly and are being used in a variety of ways, including to selectively sequence specific loci with long reads, measure chromatin state and protein-DNA binding in order to investigate the dynamics of gene regulation, and rapidly determine copy number variation. These increasingly flexible uses of single-molecule technologies highlight a young and fast-moving part of the field that is leading to a more accessible era of nucleic acid sequencing.
Collapse
Affiliation(s)
- Paul W Hook
- Department of Biomedical Engineering, Molecular Biology and Genetics, and Genetic Medicine, Johns Hopkins University, Baltimore, MD, USA
| | - Winston Timp
- Department of Biomedical Engineering, Molecular Biology and Genetics, and Genetic Medicine, Johns Hopkins University, Baltimore, MD, USA.
| |
Collapse
|
14
|
Liao YM, Chiu PY, Chien YS, Chen CF. Music Box-Inspired Semi-Automatic Hematocrit Validation Device. ACS Sens 2023; 8:2952-2959. [PMID: 37418365 DOI: 10.1021/acssensors.3c00129] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 07/09/2023]
Abstract
A high hematocrit (HCT) level is strongly associated with the risk of cardiovascular disease. For early diagnosis of cardiovascular disease, it is vital to regularly measure the HCT, which is typically achieved by centrifuging a blood sample to measure the percentage of red blood cells. However, the centrifugal modalities are usually bulky, expensive, and require a stable electric input, which restrict the availability. This research develops a semi-automatic and portable centrifugal device for HCT measurement. This torque-actuated semi-automatic centrifuge, which we call the tFuge, is inspired by a music box, allowing different operators to generate the same rhythm. It is electricity-free and can be controlled based on a constant torque mechanism. Repeatable test results can be received from among different users regardless of their age, sex, and activity. With the assistance of the Boycott effect on the tFuge, we proved that the HCT level is in high linearity to the length of the sedimentation of the blood cells in a tube (R2 = 0.99, sample HCT range 10-60%). The tFuge takes less than 4 min and requires no more than 10 μL of blood that can be obtained by a less-invasive finger prick to complete the testing procedure. Calibrated gradient numbers are printed onto the rotation disc for instant HCT results that can be read by the naked eye. We expect this proposed point-of-care testing device possesses the potential to replace the microhematocrit centrifuge in the regions with limited resources.
Collapse
Affiliation(s)
- You-Mao Liao
- Institute of Applied Mechanics, National Taiwan University, Taipei 106, Taiwan
| | - Ping-Yeh Chiu
- Department of Orthopaedic Surgery, Chang Gung Memorial Hospital and Chang Gung University College of Medicine, Taoyuan 333, Taiwan
| | - Yuh-Shiuan Chien
- Institute of Applied Mechanics, National Taiwan University, Taipei 106, Taiwan
| | - Chien-Fu Chen
- Institute of Applied Mechanics, National Taiwan University, Taipei 106, Taiwan
- Graduate School of Advanced Technology, National Taiwan University, Taipei 106, Taiwan
| |
Collapse
|
15
|
Schulz AK, Shriver C, Stathatos S, Seleb B, Weigel EG, Chang YH, Saad Bhamla M, Hu DL, Mendelson JR. Conservation tools: the next generation of engineering-biology collaborations. J R Soc Interface 2023; 20:20230232. [PMID: 37582407 PMCID: PMC10427197 DOI: 10.1098/rsif.2023.0232] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/20/2023] [Accepted: 07/21/2023] [Indexed: 08/17/2023] Open
Abstract
The recent increase in public and academic interest in preserving biodiversity has led to the growth of the field of conservation technology. This field involves designing and constructing tools that use technology to aid in the conservation of wildlife. In this review, we present five case studies and infer a framework for designing conservation tools (CT) based on human-wildlife interaction. Successful CT range in complexity from cat collars to machine learning and game theory methodologies and do not require technological expertise to contribute to conservation tool creation. Our goal is to introduce researchers to the field of conservation technology and provide references for guiding the next generation of conservation technologists. Conservation technology not only has the potential to benefit biodiversity but also has broader impacts on fields such as sustainability and environmental protection. By using innovative technologies to address conservation challenges, we can find more effective and efficient solutions to protect and preserve our planet's resources.
Collapse
Affiliation(s)
- Andrew K. Schulz
- Haptic Ingelligence Department, Max Planck Institute for Intelligent Systems, Stuttgart 70569, Germany
- Schools of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA 30332, USA
| | - Cassie Shriver
- Biological Sciences, Georgia Institute of Technology, Atlanta, GA 30332, USA
| | - Suzanne Stathatos
- Division of Engineering and Applied Science, California Institute of Technology, Pasadena, CA 91125, USA
| | - Benjamin Seleb
- Biological Sciences, Georgia Institute of Technology, Atlanta, GA 30332, USA
| | - Emily G. Weigel
- Biological Sciences, Georgia Institute of Technology, Atlanta, GA 30332, USA
| | - Young-Hui Chang
- Biological Sciences, Georgia Institute of Technology, Atlanta, GA 30332, USA
| | - M. Saad Bhamla
- Chemical and Biomolecular Engineering, Georgia Institute of Technology, Atlanta, GA 30332, USA
| | - David L. Hu
- Schools of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA 30332, USA
- Biological Sciences, Georgia Institute of Technology, Atlanta, GA 30332, USA
| | - Joseph R. Mendelson
- Biological Sciences, Georgia Institute of Technology, Atlanta, GA 30332, USA
- Zoo Atlanta, Atlanta, GA 30315, USA
| |
Collapse
|
16
|
Liu W, Lee LP. Toward Rapid and Accurate Molecular Diagnostics at Home. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2023; 35:e2206525. [PMID: 36416278 DOI: 10.1002/adma.202206525] [Citation(s) in RCA: 5] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/18/2022] [Revised: 11/14/2022] [Indexed: 05/26/2023]
Abstract
The global outbreaks of infectious diseases have significantly driven an imperative demand for rapid and accurate molecular diagnostics. Nucleic acid amplification tests (NAATs) feature high sensitivity and high specificity; however, the labor-intensive sample preparation and nucleic acid amplification steps remain challenging in order to carry out rapid and precision molecular diagnostics at home. This review discusses the advances and challenges of automatic solutions of sample preparation integrated with on-chip nucleic acid amplification for effective and accurate molecular diagnostics at home. The sample preparation methods of whole blood, urine, saliva/nasal swab, and stool on chip are examined. Then, the repurposable integrated sample preparation on a chip using various biological samples is investigated. Finally, the on-chip NAATs that can be integrated with automated sample preparation are evaluated. The user-friendly approaches with combined sample preparation and NAATs can be the game changers for next-generation rapid and precision home diagnostics.
Collapse
Affiliation(s)
- Wenpeng Liu
- Harvard Medical School, Harvard University, Boston, MA, 02115, USA
- Division of Engineering in Medicine and Renal Division, Department of Medicine, Brigham Women's Hospital, Boston, MA, 02115, USA
| | - Luke P Lee
- Harvard Medical School, Harvard University, Boston, MA, 02115, USA
- Division of Engineering in Medicine and Renal Division, Department of Medicine, Brigham Women's Hospital, Boston, MA, 02115, USA
- Department of Bioengineering, Department of Electrical Engineering and Computer Science, University of California at Berkeley, Berkeley, CA, 94720, USA
- Department of Biophysics, Institute of Quantum Biophysics, Sungkyunkwan University (SKKU), Suwon, 16419, Republic of Korea
| |
Collapse
|
17
|
Qian C, Li J, Pang Z, Xie H, Wan C, Li S, Wang X, Xiao Y, Feng X, Li Y, Chen P, Liu BF. Hand-powered centrifugal micropipette-tip with distance-based quantification for on-site testing of SARS-CoV-2 virus. Talanta 2023; 258:124466. [PMID: 36963148 PMCID: PMC10023210 DOI: 10.1016/j.talanta.2023.124466] [Citation(s) in RCA: 4] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/15/2023] [Revised: 03/10/2023] [Accepted: 03/16/2023] [Indexed: 03/19/2023]
Abstract
This paper proposed a hand-powered centrifugal micropipette-tip strategy, termed HCM, for all-in-one immunoassay combined with a distance-based readout for portable quantitative detection of SARS-CoV-2. The target SARS-CoV-2 virus antigen triggers the binding of multiple monoclonal antibody-coated red latex nanobeads, forming larger complexes. Following incubation and centrifugation, the formed aggregated complexes settle at the bottom of the tip, while free red nanobeads remain suspended in the solution. The HCM enables sensitive (1 ng/mL) and reliable quantification of SARS-CoV-2 within 25 min. With the advantages of free washing, free fabrication, free instrument, and without the optical device, the proposed low-cost and easy-to-use HCM immunoassay shows great potential for quantitative POC diagnostics for SARS-CoV-2.
Collapse
Affiliation(s)
- Chungen Qian
- The Key Laboratory for Biomedical Photonics of MOE at Wuhan National Laboratory for Optoelectronics-Hubei Bioinformatics & Molecular Imaging Key Laboratory, Systems Biology Theme, Department of Biomedical Engineering, College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan, 430074, China
| | - Jiashuo Li
- The Key Laboratory for Biomedical Photonics of MOE at Wuhan National Laboratory for Optoelectronics-Hubei Bioinformatics & Molecular Imaging Key Laboratory, Systems Biology Theme, Department of Biomedical Engineering, College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan, 430074, China
| | - Zheng Pang
- The Key Laboratory for Biomedical Photonics of MOE at Wuhan National Laboratory for Optoelectronics-Hubei Bioinformatics & Molecular Imaging Key Laboratory, Systems Biology Theme, Department of Biomedical Engineering, College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan, 430074, China
| | - Han Xie
- The Key Laboratory for Biomedical Photonics of MOE at Wuhan National Laboratory for Optoelectronics-Hubei Bioinformatics & Molecular Imaging Key Laboratory, Systems Biology Theme, Department of Biomedical Engineering, College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan, 430074, China
| | - Chao Wan
- The Key Laboratory for Biomedical Photonics of MOE at Wuhan National Laboratory for Optoelectronics-Hubei Bioinformatics & Molecular Imaging Key Laboratory, Systems Biology Theme, Department of Biomedical Engineering, College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan, 430074, China
| | - Shunji Li
- The Key Laboratory for Biomedical Photonics of MOE at Wuhan National Laboratory for Optoelectronics-Hubei Bioinformatics & Molecular Imaging Key Laboratory, Systems Biology Theme, Department of Biomedical Engineering, College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan, 430074, China
| | - Xin Wang
- The Key Laboratory for Biomedical Photonics of MOE at Wuhan National Laboratory for Optoelectronics-Hubei Bioinformatics & Molecular Imaging Key Laboratory, Systems Biology Theme, Department of Biomedical Engineering, College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan, 430074, China
| | - Yujin Xiao
- The Key Laboratory for Biomedical Photonics of MOE at Wuhan National Laboratory for Optoelectronics-Hubei Bioinformatics & Molecular Imaging Key Laboratory, Systems Biology Theme, Department of Biomedical Engineering, College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan, 430074, China
| | - Xiaojun Feng
- The Key Laboratory for Biomedical Photonics of MOE at Wuhan National Laboratory for Optoelectronics-Hubei Bioinformatics & Molecular Imaging Key Laboratory, Systems Biology Theme, Department of Biomedical Engineering, College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan, 430074, China
| | - Yiwei Li
- The Key Laboratory for Biomedical Photonics of MOE at Wuhan National Laboratory for Optoelectronics-Hubei Bioinformatics & Molecular Imaging Key Laboratory, Systems Biology Theme, Department of Biomedical Engineering, College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan, 430074, China
| | - Peng Chen
- The Key Laboratory for Biomedical Photonics of MOE at Wuhan National Laboratory for Optoelectronics-Hubei Bioinformatics & Molecular Imaging Key Laboratory, Systems Biology Theme, Department of Biomedical Engineering, College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan, 430074, China.
| | - Bi-Feng Liu
- The Key Laboratory for Biomedical Photonics of MOE at Wuhan National Laboratory for Optoelectronics-Hubei Bioinformatics & Molecular Imaging Key Laboratory, Systems Biology Theme, Department of Biomedical Engineering, College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan, 430074, China.
| |
Collapse
|
18
|
Wang B, Li Y, Zhou M, Han Y, Zhang M, Gao Z, Liu Z, Chen P, Du W, Zhang X, Feng X, Liu BF. Smartphone-based platforms implementing microfluidic detection with image-based artificial intelligence. Nat Commun 2023; 14:1341. [PMID: 36906581 PMCID: PMC10007670 DOI: 10.1038/s41467-023-36017-x] [Citation(s) in RCA: 27] [Impact Index Per Article: 27.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/23/2022] [Accepted: 01/10/2023] [Indexed: 03/13/2023] Open
Abstract
The frequent outbreak of global infectious diseases has prompted the development of rapid and effective diagnostic tools for the early screening of potential patients in point-of-care testing scenarios. With advances in mobile computing power and microfluidic technology, the smartphone-based mobile health platform has drawn significant attention from researchers developing point-of-care testing devices that integrate microfluidic optical detection with artificial intelligence analysis. In this article, we summarize recent progress in these mobile health platforms, including the aspects of microfluidic chips, imaging modalities, supporting components, and the development of software algorithms. We document the application of mobile health platforms in terms of the detection objects, including molecules, viruses, cells, and parasites. Finally, we discuss the prospects for future development of mobile health platforms.
Collapse
Affiliation(s)
- Bangfeng Wang
- The Key Laboratory for Biomedical Photonics of MOE at Wuhan National Laboratory for Optoelectronics - Hubei Bioinformatics & Molecular Imaging Key Laboratory, Systems Biology Theme, Department of Biomedical Engineering, College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan, 430074, China
| | - Yiwei Li
- The Key Laboratory for Biomedical Photonics of MOE at Wuhan National Laboratory for Optoelectronics - Hubei Bioinformatics & Molecular Imaging Key Laboratory, Systems Biology Theme, Department of Biomedical Engineering, College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan, 430074, China
| | - Mengfan Zhou
- The Key Laboratory for Biomedical Photonics of MOE at Wuhan National Laboratory for Optoelectronics - Hubei Bioinformatics & Molecular Imaging Key Laboratory, Systems Biology Theme, Department of Biomedical Engineering, College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan, 430074, China
| | - Yulong Han
- School of Engineering and Applied Sciences, Harvard University, Cambridge, MA, 02138, USA
| | - Mingyu Zhang
- The Key Laboratory for Biomedical Photonics of MOE at Wuhan National Laboratory for Optoelectronics - Hubei Bioinformatics & Molecular Imaging Key Laboratory, Systems Biology Theme, Department of Biomedical Engineering, College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan, 430074, China
| | - Zhaolong Gao
- The Key Laboratory for Biomedical Photonics of MOE at Wuhan National Laboratory for Optoelectronics - Hubei Bioinformatics & Molecular Imaging Key Laboratory, Systems Biology Theme, Department of Biomedical Engineering, College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan, 430074, China
| | - Zetai Liu
- The Key Laboratory for Biomedical Photonics of MOE at Wuhan National Laboratory for Optoelectronics - Hubei Bioinformatics & Molecular Imaging Key Laboratory, Systems Biology Theme, Department of Biomedical Engineering, College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan, 430074, China
| | - Peng Chen
- The Key Laboratory for Biomedical Photonics of MOE at Wuhan National Laboratory for Optoelectronics - Hubei Bioinformatics & Molecular Imaging Key Laboratory, Systems Biology Theme, Department of Biomedical Engineering, College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan, 430074, China
| | - Wei Du
- The Key Laboratory for Biomedical Photonics of MOE at Wuhan National Laboratory for Optoelectronics - Hubei Bioinformatics & Molecular Imaging Key Laboratory, Systems Biology Theme, Department of Biomedical Engineering, College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan, 430074, China
| | - Xingcai Zhang
- School of Engineering and Applied Sciences, Harvard University, Cambridge, MA, 02138, USA.
| | - Xiaojun Feng
- The Key Laboratory for Biomedical Photonics of MOE at Wuhan National Laboratory for Optoelectronics - Hubei Bioinformatics & Molecular Imaging Key Laboratory, Systems Biology Theme, Department of Biomedical Engineering, College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan, 430074, China.
| | - Bi-Feng Liu
- The Key Laboratory for Biomedical Photonics of MOE at Wuhan National Laboratory for Optoelectronics - Hubei Bioinformatics & Molecular Imaging Key Laboratory, Systems Biology Theme, Department of Biomedical Engineering, College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan, 430074, China.
| |
Collapse
|
19
|
Baillargeon KR, Mace CR. Microsampling tools for collecting, processing, and storing blood at the point-of-care. Bioeng Transl Med 2023; 8:e10476. [PMID: 36925672 PMCID: PMC10013775 DOI: 10.1002/btm2.10476] [Citation(s) in RCA: 9] [Impact Index Per Article: 9.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/03/2022] [Revised: 11/29/2022] [Accepted: 12/07/2022] [Indexed: 01/01/2023] Open
Abstract
In the wake of the COVID-19 global pandemic, self-administered microsampling tools have reemerged as an effective means to maintain routine healthcare assessments without inundating hospitals or clinics. Finger-stick collection of blood is easily performed at home, in the workplace, or at the point-of-care, obviating the need for a trained phlebotomist. While the initial collection of blood is facile, the diagnostic or clinical utility of the sample is dependent on how the sample is processed and stored prior to transport to an analytical laboratory. The past decade has seen incredible innovation for the development of new materials and technologies to collect low-volume samples of blood with excellent precision that operate independently of the hematocrit effect. The final application of that blood (i.e., the test to be performed) ultimately dictates the collection and storage approach as certain materials or chemical reagents can render a sample diagnostically useless. Consequently, there is not a single microsampling tool that is capable of addressing every clinical need at this time. In this review, we highlight technologies designed for patient-centric microsampling blood at the point-of-care and discuss their utility for quantitative sampling as a function of collection material and technique. In addition to surveying methods for collecting and storing whole blood, we emphasize the need for direct separation of the cellular and liquid components of blood to produce cell-free plasma to expand clinical utility. Integrating advanced functionality while maintaining simple user operation presents a viable means of revolutionizing self-administered microsampling, establishing new avenues for innovation in materials science, and expanding access to healthcare.
Collapse
Affiliation(s)
- Keith R Baillargeon
- Department of Chemistry, Laboratory for Living Devices Tufts University Medford Massachusetts USA
| | - Charles R Mace
- Department of Chemistry, Laboratory for Living Devices Tufts University Medford Massachusetts USA
| |
Collapse
|
20
|
Lu N, Tay HM, Petchakup C, He L, Gong L, Maw KK, Leong SY, Lok WW, Ong HB, Guo R, Li KHH, Hou HW. Label-free microfluidic cell sorting and detection for rapid blood analysis. LAB ON A CHIP 2023; 23:1226-1257. [PMID: 36655549 DOI: 10.1039/d2lc00904h] [Citation(s) in RCA: 22] [Impact Index Per Article: 22.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/17/2023]
Abstract
Blood tests are considered as standard clinical procedures to screen for markers of diseases and health conditions. However, the complex cellular background (>99.9% RBCs) and biomolecular composition often pose significant technical challenges for accurate blood analysis. An emerging approach for point-of-care blood diagnostics is utilizing "label-free" microfluidic technologies that rely on intrinsic cell properties for blood fractionation and disease detection without any antibody binding. A growing body of clinical evidence has also reported that cellular dysfunction and their biophysical phenotypes are complementary to standard hematoanalyzer analysis (complete blood count) and can provide a more comprehensive health profiling. In this review, we will summarize recent advances in microfluidic label-free separation of different blood cell components including circulating tumor cells, leukocytes, platelets and nanoscale extracellular vesicles. Label-free single cell analysis of intrinsic cell morphology, spectrochemical properties, dielectric parameters and biophysical characteristics as novel blood-based biomarkers will also be presented. Next, we will highlight research efforts that combine label-free microfluidics with machine learning approaches to enhance detection sensitivity and specificity in clinical studies, as well as innovative microfluidic solutions which are capable of fully integrated and label-free blood cell sorting and analysis. Lastly, we will envisage the current challenges and future outlook of label-free microfluidics platforms for high throughput multi-dimensional blood cell analysis to identify non-traditional circulating biomarkers for clinical diagnostics.
Collapse
Affiliation(s)
- Nan Lu
- School of Mechanical and Aerospace Engineering, Nanyang Technological University, 50 Nanyang Avenue, Blk N3, Level 2, Room 86 (N3-02c-86), 639798, Singapore.
- HP-NTU Digital Manufacturing Corporate Lab, Nanyang Technological University, 65 Nanyang Drive, Block N3, 637460, Singapore
| | - Hui Min Tay
- School of Mechanical and Aerospace Engineering, Nanyang Technological University, 50 Nanyang Avenue, Blk N3, Level 2, Room 86 (N3-02c-86), 639798, Singapore.
| | - Chayakorn Petchakup
- School of Mechanical and Aerospace Engineering, Nanyang Technological University, 50 Nanyang Avenue, Blk N3, Level 2, Room 86 (N3-02c-86), 639798, Singapore.
| | - Linwei He
- School of Mechanical and Aerospace Engineering, Nanyang Technological University, 50 Nanyang Avenue, Blk N3, Level 2, Room 86 (N3-02c-86), 639798, Singapore.
| | - Lingyan Gong
- School of Mechanical and Aerospace Engineering, Nanyang Technological University, 50 Nanyang Avenue, Blk N3, Level 2, Room 86 (N3-02c-86), 639798, Singapore.
| | - Kay Khine Maw
- School of Mechanical and Aerospace Engineering, Nanyang Technological University, 50 Nanyang Avenue, Blk N3, Level 2, Room 86 (N3-02c-86), 639798, Singapore.
| | - Sheng Yuan Leong
- School of Mechanical and Aerospace Engineering, Nanyang Technological University, 50 Nanyang Avenue, Blk N3, Level 2, Room 86 (N3-02c-86), 639798, Singapore.
| | - Wan Wei Lok
- School of Mechanical and Aerospace Engineering, Nanyang Technological University, 50 Nanyang Avenue, Blk N3, Level 2, Room 86 (N3-02c-86), 639798, Singapore.
| | - Hong Boon Ong
- School of Mechanical and Aerospace Engineering, Nanyang Technological University, 50 Nanyang Avenue, Blk N3, Level 2, Room 86 (N3-02c-86), 639798, Singapore.
| | - Ruya Guo
- Key Laboratory of Agricultural Information Acquisition Technology, Ministry of Agriculture and Rural Affairs, China Agricultural University, Beijing, 100083, China
| | - King Ho Holden Li
- School of Mechanical and Aerospace Engineering, Nanyang Technological University, 50 Nanyang Avenue, Blk N3, Level 2, Room 86 (N3-02c-86), 639798, Singapore.
- HP-NTU Digital Manufacturing Corporate Lab, Nanyang Technological University, 65 Nanyang Drive, Block N3, 637460, Singapore
| | - Han Wei Hou
- School of Mechanical and Aerospace Engineering, Nanyang Technological University, 50 Nanyang Avenue, Blk N3, Level 2, Room 86 (N3-02c-86), 639798, Singapore.
- HP-NTU Digital Manufacturing Corporate Lab, Nanyang Technological University, 65 Nanyang Drive, Block N3, 637460, Singapore
- Lee Kong Chian School of Medicine, Nanyang Technological University, 11 Mandalay Road, Clinical Sciences Building, 308232, Singapore
| |
Collapse
|
21
|
An ultralow-cost portable centrifuge from discarded materials for medical applications. Sci Rep 2023; 13:3081. [PMID: 36813835 PMCID: PMC9946952 DOI: 10.1038/s41598-023-30327-2] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/11/2022] [Accepted: 02/21/2023] [Indexed: 02/24/2023] Open
Abstract
Reliable centrifugation for medical applications has historically required access to expensive, bulky, and electricity-dependent commercial devices, which are generally unavailable in resource-poor settings. Although several portable, low-cost, non-electric centrifuges have been described, these solutions have predominately been designed for diagnostic applications requiring sedimentation of relatively small volumes. Moreover, construction of these devices frequently requires access to specialized materials and tools that are often unavailable in underserved areas. Herein, we describe the design, assembly, and experimental validation of the CentREUSE-an ultralow-cost, portable, discarded material-based, human-powered centrifuge for use in therapeutic applications. The CentREUSE demonstrated a mean centrifugal force of 10.5 relative centrifugal force (RCF) ± 1.3. Sedimentation of 1.0 mL triamcinolone acetonide suspension for intravitreal use after 3 min of CentREUSE centrifugation was comparable to that achieved after 12 h of gravity-mediated sedimentation (0.41 mL ± 0.04 vs. 0.38 mL ± 0.03, p = 0.14). Sediment compactness after 5 min and 10 min of CentREUSE centrifugation was similar to that observed after centrifugation with a commercial device for 5 min at 10 RCF (0.31 mL ± 0.02 vs. 0.32 mL ± 0.03, p = 0.20) and 50 RCF (0.20 mL ± 0.02 vs. 0.19 mL ± 0.01, p = 0.15), respectively. Templates and instructions for construction of the CentREUSE are included as part of this open-source publication.
Collapse
|
22
|
Wang X, Zheng X, Song Z, Lin D, Li Q, Qi J, Xiang J, Chen L, Li B. Electric yo-yo centrifugation combining with paper-based microfluidic immunoassay chip for inflammatory biomarkers detection in whole blood. Talanta 2023; 253:123883. [PMID: 36137494 DOI: 10.1016/j.talanta.2022.123883] [Citation(s) in RCA: 6] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/26/2022] [Revised: 06/25/2022] [Accepted: 08/23/2022] [Indexed: 12/13/2022]
Abstract
At present, most countries or regions use commercial centrifuges for centrifugation, but this is out of reaching for limited-resource areas. To overcome this problem, a portable electric yo-yo as centrifuge was firstly proposed to obtain serum, and this device can be combined with paper-based analytical devices for enzyme-linked immunosorbent assay (ELISA) analysis from human whole blood. In this study, inflammatory biomarkers C-reactive protein (CRP) and serum amyloid A (SAA) were used as target biomarker to verify the performance of the proposed method. The results shows good performance and their detection limits were determined to be 580 pg/mL for CRP and 800 pg/mL for SAA, respectively. We believe this method provides a new platform of low cost and fast detection for inflammatory biomarkers in the limited-resource settings.
Collapse
Affiliation(s)
- Xiaolei Wang
- College of Chemistry, Chemical Engineering and Materials Science, Collaborative Innovation Center of Functionalized Probes for Chemical Imaging in Universities of Shandong, Key Laboratory of Molecular and Nano Probes, Ministry of Education, Institute of Molecular and Nano Science, Shandong Normal University, Jinan, 250014, PR China
| | - Xiaoli Zheng
- College of Chemistry, Chemical Engineering and Materials Science, Collaborative Innovation Center of Functionalized Probes for Chemical Imaging in Universities of Shandong, Key Laboratory of Molecular and Nano Probes, Ministry of Education, Institute of Molecular and Nano Science, Shandong Normal University, Jinan, 250014, PR China
| | - Zhihua Song
- School of Pharmacy, Collaborative Innovation Center of Advanced Drug Delivery System and Biotech Drugs in Universities of Shandong, Key Laboratory of Molecular Pharmacology and Drug Evaluation, Ministry of Education, Yantai University, Yantai, 264005, PR China
| | - Dong Lin
- CAS Key Laboratory of Coastal Environmental Processes and Ecological Remediation, Shandong Key Laboratory of Coastal Environmental Processes, Research Center for Coastal Environmental Engineering and Technology, Yantai Institute of Coastal Zone Research, Chinese Academy of Sciences, Yantai, 264003, PR China
| | - Qingling Li
- College of Chemistry, Chemical Engineering and Materials Science, Collaborative Innovation Center of Functionalized Probes for Chemical Imaging in Universities of Shandong, Key Laboratory of Molecular and Nano Probes, Ministry of Education, Institute of Molecular and Nano Science, Shandong Normal University, Jinan, 250014, PR China
| | - Ji Qi
- CAS Key Laboratory of Coastal Environmental Processes and Ecological Remediation, Shandong Key Laboratory of Coastal Environmental Processes, Research Center for Coastal Environmental Engineering and Technology, Yantai Institute of Coastal Zone Research, Chinese Academy of Sciences, Yantai, 264003, PR China
| | - Jiawen Xiang
- CAS Key Laboratory of Coastal Environmental Processes and Ecological Remediation, Shandong Key Laboratory of Coastal Environmental Processes, Research Center for Coastal Environmental Engineering and Technology, Yantai Institute of Coastal Zone Research, Chinese Academy of Sciences, Yantai, 264003, PR China
| | - Lingxin Chen
- CAS Key Laboratory of Coastal Environmental Processes and Ecological Remediation, Shandong Key Laboratory of Coastal Environmental Processes, Research Center for Coastal Environmental Engineering and Technology, Yantai Institute of Coastal Zone Research, Chinese Academy of Sciences, Yantai, 264003, PR China.
| | - Bowei Li
- CAS Key Laboratory of Coastal Environmental Processes and Ecological Remediation, Shandong Key Laboratory of Coastal Environmental Processes, Research Center for Coastal Environmental Engineering and Technology, Yantai Institute of Coastal Zone Research, Chinese Academy of Sciences, Yantai, 264003, PR China.
| |
Collapse
|
23
|
Zhang X, Jiang XY, Chen S, Yu YL, Wang JH. Facile Lego-Spinner Pretreatment Device for Analysis of Arsenic Species in Dried Blood Spots by Ion Chromatography-Inductively Coupled Plasma-Mass Spectrometry. Anal Chem 2023; 95:2375-2381. [PMID: 36652587 DOI: 10.1021/acs.analchem.2c04368] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/19/2023]
Abstract
Dried blood spot (DBS) detection has the advantages of small blood collection, convenience, and reliability, which provides a possibility for large-scale evaluation of arsenic exposure in human population. Herein, a facile Lego-spinner pretreatment device is rationally designed for speciation analysis of arsenic in DBSs by ion chromatography-inductively coupled plasma-mass spectrometry (IC-ICP-MS). In the mixing mode of the Lego-spinner, the magnetic stir bar in the centrifuge tube rotates under a magnetic field to assist the dispersive extraction of arsenic species in the DBS with reagents. In the centrifugation mode of the Lego-spinner, the arsenic extract is separated from the blood matrix for the subsequent IC-ICP-MS analysis. For the DBS prepared from 80 μL of whole blood, the whole pretreatment operation can be completed within 25 min. The detection limits of arsenobetaine, arsenite, dimethylarsenate, monomethylarsonate, and arsenate in the DBS are 0.09-0.15 μg L-1, and precisions are <11%. The concentrations of these five arsenic species are highly correlated between whole blood and the DBS (r2 > 0.97), and Bland-Altman analysis indicates that the concentration difference of arsenic species between whole blood and the DBS is within ±20%. The DBS sampling approach can effectively preserve arsenic species for at least 30 days at 4 °C, and the contents of arsenic species in the DBS prepared from capillary blood are in a reasonable agreement with those of venous whole blood (gold standard). This Lego-spinner provides a handy and efficient tool for fast extraction of arsenic species in DBSs, facilitating the in-depth study of arsenic migration and transformation in the human body.
Collapse
Affiliation(s)
- Xiao Zhang
- Research Center for Analytical Sciences, Department of Chemistry, College of Sciences, Northeastern University, Box 332, Shenyang 110819, China
| | - Xin-Yi Jiang
- Research Center for Analytical Sciences, Department of Chemistry, College of Sciences, Northeastern University, Box 332, Shenyang 110819, China
| | - Shuai Chen
- Research Center for Analytical Sciences, Department of Chemistry, College of Sciences, Northeastern University, Box 332, Shenyang 110819, China
| | - Yong-Liang Yu
- Research Center for Analytical Sciences, Department of Chemistry, College of Sciences, Northeastern University, Box 332, Shenyang 110819, China
| | - Jian-Hua Wang
- Research Center for Analytical Sciences, Department of Chemistry, College of Sciences, Northeastern University, Box 332, Shenyang 110819, China
| |
Collapse
|
24
|
Abstract
Open hardware solutions are increasingly being chosen by researchers as a strategy to improve access to technology for cutting-edge biology research. The use of DIY technology is already widespread, particularly in countries with limited access to science funding, and is catalyzing the development of open-source technologies. Beyond financial accessibility, open hardware can be transformational for the access of laboratories to equipment by reducing dependence on import logistics and enabling direct knowledge transfer. Central drivers to the adoption of appropriate open-source technologies in biology laboratories around the world are open sharing, digital fabrication, local production, the use of standard parts, and detailed documentation. This Essay examines the global spread of open hardware and discusses which kinds of open-source technologies are the most beneficial in scientific environments with economic and infrastructural constraints.
Collapse
Affiliation(s)
- Tobias Wenzel
- Institute for Biological and Medical Engineering, Schools of Engineering, Medicine and Biological Sciences, Pontificia Universidad Católica de Chile, Macul, Región Metropolitana, Chile
- * E-mail:
| |
Collapse
|
25
|
Free TJ, Tucker RW, Simonson KM, Smith SA, Lindgren CM, Pitt WG, Bundy BC. Engineering At-Home Dilution and Filtration Methods to Enable Paper-Based Colorimetric Biosensing in Human Blood with Cell-Free Protein Synthesis. BIOSENSORS 2023; 13:104. [PMID: 36671942 PMCID: PMC9855769 DOI: 10.3390/bios13010104] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 12/01/2022] [Revised: 12/28/2022] [Accepted: 12/30/2022] [Indexed: 06/17/2023]
Abstract
Diagnostic blood tests can guide the administration of healthcare to save and improve lives. Most clinical biosensing blood tests require a trained technician and specialized equipment to process samples and interpret results, which greatly limits test accessibility. Colorimetric paper-based diagnostics have an equipment-free readout, but raw blood obscures a colorimetric response which has motivated diverse efforts to develop blood sample processing techniques. This work uses inexpensive readily-available materials to engineer user-friendly dilution and filtration methods for blood sample collection and processing to enable a proof-of-concept colorimetric biosensor that is responsive to glutamine in 50 µL blood drop samples in less than 30 min. Paper-based user-friendly blood sample collection and processing combined with CFPS biosensing technology represents important progress towards the development of at-home biosensors that could be broadly applicable to personalized healthcare.
Collapse
|
26
|
Baillargeon K, Morbioli GG, Brooks JC, Miljanic PR, Mace CR. Direct Processing and Storage of Cell-Free Plasma Using Dried Plasma Spot Cards. ACS MEASUREMENT SCIENCE AU 2022; 2:457-465. [PMID: 36281294 PMCID: PMC9585636 DOI: 10.1021/acsmeasuresciau.2c00034] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 06/06/2022] [Revised: 07/12/2022] [Accepted: 07/13/2022] [Indexed: 06/16/2023]
Abstract
Plasma separation cards represent a viable approach for expanding testing capabilities away from clinical settings by generating cell-free plasma with minimal user intervention. These devices typically comprise a basic structure of the plasma separation membrane, unconstrained porous collection pad, and utilize either (i) lateral or (ii) vertical fluidic pathways for separating plasma. Unfortunately, these configurations are highly susceptible to (i) inconsistent sampling volume due to differences in the patient hematocrit or (ii) severe contamination due to leakage of red blood cells or release of hemoglobin (i.e., hemolysis). Herein, we combine the enhanced sampling of our previously reported patterned dried blood spot cards with an assembly of porous separation materials to produce a patterned dried plasma spot card for direct processing and storage of cell-free plasma. Linking both vertical separation and lateral distribution of plasma yields discrete plasma collection zones that are spatially protected from potential contamination due to hemolysis and an inlet zone enriched with blood cells for additional testing. We evaluate the versatility of this card by quantitation of three classes of analytes and techniques including (i) the soluble transferrin receptor by enzyme-linked immunosorbent assay, (ii) potassium by inductively coupled plasma atomic emission spectroscopy, and (iii) 18S rRNA by reverse transcriptase quantitative polymerase chain reaction. We achieve quantitative recovery of each class of analyte with no statistically significant difference between dried and liquid reference samples. We anticipate that this sampling approach can be applied broadly to improve access to critical blood testing in resource-limited settings or at the point-of-care.
Collapse
|
27
|
Soma Poór V. A low-cost and open-source mini benchtop centrifuge for molecular biology labs. HARDWAREX 2022; 12:e00328. [PMID: 35770242 PMCID: PMC9234221 DOI: 10.1016/j.ohx.2022.e00328] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 03/06/2022] [Revised: 05/07/2022] [Accepted: 06/12/2022] [Indexed: 06/15/2023]
Abstract
The aim of this manuscript is to provide all the necessary information to build a simple benchtop mini centrifuge that is able to remove droplets and liquid film from the inner wall of PCR tubes and PCR strips following vortexing. Users can choose between two rotors: one can hold up to six tubes (1.5/2 ml, or 500 µl and 200 µl tubes with adapters) or two PCR strips. The design consists of only three printed parts (optimized to be printed without supports) and cheap off-the-shelf components (80 mm computer fan, switches, food container and power supply). It can be assembled with basic soldering skills, no programming needed. While the total cost of materials is only 20 €, when compared to its commercial counterparts, this DIY benchtop spinner was equally capable to remove droplets. Comparing noise levels this model was quieter than an Eppendorf 5424, BioSan MSC-6000 or Kisker biotech centrifuges. Because it is designed to perform a very generic and common task, it could be useful for a very wide array of laboratories and researchers: molecular biology, genetics, microbiology, student labs, biohacking labs, etc.
Collapse
|
28
|
Cruz CJG, Kil R, Wong S, Dacquay LC, Mirano-Bascos D, Rivera PT, McMillen DR. Malarial Antibody Detection with an Engineered Yeast Agglutination Assay. ACS Synth Biol 2022; 11:2938-2946. [PMID: 35861604 DOI: 10.1021/acssynbio.2c00160] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/24/2023]
Abstract
Malaria, a disease caused by the Plasmodium parasite carried by Anopheles mosquitoes, is commonly diagnosed by microscopy of peripheral blood smears and with rapid diagnostic tests. Both methods show limited detection of low parasitemia that may maintain transmission and hinder malaria elimination. We have developed a novel agglutination assay in which modified Saccharomyces cerevisiae cells act as antigen-displaying bead-like particles to capture malaria antibodies. The Epidermal Growth Factor-1 like domain (EGF1) of the Plasmodium falciparum merozoite surface protein-1 (PfMSP-119) was displayed on the yeast surface and shown to be capable of binding antimalaria antibodies. Mixed with a second yeast strain displaying the Z domain of Protein A from Staphylococcus aureus and allowed to settle in a round-bottomed well, the yeast produce a visually distinctive agglutination test result: a tight "button" at a low level of malarial antibodies, and a diffuse "sheet" when higher antibody levels are present. Positive agglutination results were observed in malaria-positive human serum to a serum dilution of 1:100 to 1:125. Since the yeast cells are inexpensive to produce, the test may be amenable to local production in regions seeking malaria surveillance information to guide their elimination programs.
Collapse
Affiliation(s)
- Criselda Jean G Cruz
- Department of Chemical and Physical Sciences, University of Toronto Mississauga, Mississauga, Ontario L5L 1C6, Canada.,College of Medicine, University of the Philippines Manila, Manila 1108, Philippines
| | - Richard Kil
- Department of Chemical and Physical Sciences, University of Toronto Mississauga, Mississauga, Ontario L5L 1C6, Canada.,Department of Chemistry, University of British Columbia, Vancouver, British Columbia V6T 1Z1, Canada
| | - Stanley Wong
- Department of Chemical and Physical Sciences, University of Toronto Mississauga, Mississauga, Ontario L5L 1C6, Canada.,Department of Chemistry, University of Toronto, Toronto, Ontario M5S 3H6, Canada
| | - Louis C Dacquay
- Department of Chemical and Physical Sciences, University of Toronto Mississauga, Mississauga, Ontario L5L 1C6, Canada.,Department of Cell and Systems Biology, University of Toronto, Toronto, Ontario M5S 3G5, Canada
| | - Denise Mirano-Bascos
- National Institute of Molecular Biology and Biotechnology, University of the Philippines Diliman, Quezon City 1101, Philippines
| | - Pilarita T Rivera
- College of Medicine, University of the Philippines Manila, Manila 1108, Philippines.,Department of Parasitology, College of Public Health, University of the Philippines Manila, Manila 1000, Philippines
| | - David R McMillen
- Department of Chemical and Physical Sciences, University of Toronto Mississauga, Mississauga, Ontario L5L 1C6, Canada.,Department of Chemistry, University of Toronto, Toronto, Ontario M5S 3H6, Canada.,Department of Cell and Systems Biology, University of Toronto, Toronto, Ontario M5S 3G5, Canada
| |
Collapse
|
29
|
Khosla NK, Lesinski JM, Colombo M, Bezinge L, deMello AJ, Richards DA. Simplifying the complex: accessible microfluidic solutions for contemporary processes within in vitro diagnostics. LAB ON A CHIP 2022; 22:3340-3360. [PMID: 35984715 PMCID: PMC9469643 DOI: 10.1039/d2lc00609j] [Citation(s) in RCA: 14] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/06/2022] [Accepted: 08/15/2022] [Indexed: 05/02/2023]
Abstract
In vitro diagnostics (IVDs) form the cornerstone of modern medicine. They are routinely employed throughout the entire treatment pathway, from initial diagnosis through to prognosis, treatment planning, and post-treatment surveillance. Given the proven links between high quality diagnostic testing and overall health, ensuring broad access to IVDs has long been a focus of both researchers and medical professionals. Unfortunately, the current diagnostic paradigm relies heavily on centralized laboratories, complex and expensive equipment, and highly trained personnel. It is commonly assumed that this level of complexity is required to achieve the performance necessary for sensitive and specific disease diagnosis, and that making something affordable and accessible entails significant compromises in test performance. However, recent work in the field of microfluidics is challenging this notion. By exploiting the unique features of microfluidic systems, researchers have been able to create progressively simple devices that can perform increasingly complex diagnostic assays. This review details how microfluidic technologies are disrupting the status quo, and facilitating the development of simple, affordable, and accessible integrated IVDs. Importantly, we discuss the advantages and limitations of various approaches, and highlight the remaining challenges within the field.
Collapse
Affiliation(s)
- Nathan K Khosla
- Institute for Chemical and Bioengineering, ETH Zürich, Vladimir Prelog Weg 1, Zürich, 8093, Switzerland.
| | - Jake M Lesinski
- Institute for Chemical and Bioengineering, ETH Zürich, Vladimir Prelog Weg 1, Zürich, 8093, Switzerland.
| | - Monika Colombo
- Institute for Chemical and Bioengineering, ETH Zürich, Vladimir Prelog Weg 1, Zürich, 8093, Switzerland.
| | - Léonard Bezinge
- Institute for Chemical and Bioengineering, ETH Zürich, Vladimir Prelog Weg 1, Zürich, 8093, Switzerland.
| | - Andrew J deMello
- Institute for Chemical and Bioengineering, ETH Zürich, Vladimir Prelog Weg 1, Zürich, 8093, Switzerland.
| | - Daniel A Richards
- Institute for Chemical and Bioengineering, ETH Zürich, Vladimir Prelog Weg 1, Zürich, 8093, Switzerland.
| |
Collapse
|
30
|
Micro-Volume Blood Separation Membrane for In-Situ Biosensing. BIOSENSORS 2022; 12:bios12090712. [PMID: 36140097 PMCID: PMC9496035 DOI: 10.3390/bios12090712] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 06/23/2022] [Revised: 08/19/2022] [Accepted: 08/31/2022] [Indexed: 11/20/2022]
Abstract
In this paper, we report a point-of-care (POCT) testing strip based on a porous membrane structure for whole blood separation and colorimetric analysis without external supporting equipment. Conventional blood tests rely on large instruments for blood pretreatment and separation to improve measurement accuracy. Cellulose acetate (CA) membranes with different pore diameters and structures were prepared via a non-solvent method for the separation of whole blood. Among them, CA@PEG-2000 membranes with nano-pores on the surface and micro-pores in the interior facilitated the capture of blood cells on the surface, as well as the free diffusion of plasma through the porous interior structure. The fluid flow of blood in the asymmetric porous structure can be theoretically estimated using the Lucas-Washburn equation. Compared with the conventional paper strips and other porous membranes, the CA@PEG-2000 membrane with an immobilized sensing layer exhibited efficient blood separation, a short response time (less than 2 min), an ultralow dosage volume (5 μL), and high sensitivity. The fabricated blood separation membranes can be further used for the detection of various biomarkers in whole blood, providing additional options for rapid quantitative POCT tests.
Collapse
|
31
|
Development of a Handheld Nano-centrifugal Device for Visual Virus Detection. JOURNAL OF ANALYSIS AND TESTING 2022; 6:353-364. [PMID: 35966388 PMCID: PMC9361950 DOI: 10.1007/s41664-022-00232-0] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/10/2022] [Accepted: 05/12/2022] [Indexed: 11/20/2022]
Abstract
Gold nanoparticles (AuNPs) colorimetric assays based on distance-dependent optical characteristics have been widely employed for bioanalysis. However, this assay is not effective for visually detecting low-concentration targets due to the faint color change. Here, we developed a handheld nano-centrifugal device which could separate the crosslinked and non-crosslinked AuNPs. Results showed that the handheld nano-centrifugal device could easily reach more than 6000 r/min within 10 s simply by stretching and tightening the coiled rope in an appropriate rhythm. Further, combined with the CRISPR/Cas12a nucleic acids recognition system, a field-deployable colorimetric platform termed handheld nano-centrifugal device assisted CRISPR/Cas12a (Hand-CRISPR) has been validated. Moreover, clinical diagnostics applications for Epstein-Barr virus (EBV) and severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) detection with high sensitivity and accuracy (100% consistency with reverse transcription quantitative real-time polymerase chain reaction (RT-qPCR) test results) have been demonstrated. Overall, the Hand-CRISPR platform showed great promise in point-of-care-test (POCT) application, expected to become a powerful supplement to the standard nucleic acid testing method in remote or poverty-stricken areas.
Collapse
|
32
|
Chernyshev VS, Chuprov-Netochin RN, Tsydenzhapova E, Svirshchevskaya EV, Poltavtseva RA, Merdalimova A, Yashchenok A, Keshelava A, Sorokin K, Keshelava V, Sukhikh GT, Gorin D, Leonov S, Skliar M. Asymmetric depth-filtration: A versatile and scalable method for high-yield isolation of extracellular vesicles with low contamination. J Extracell Vesicles 2022; 11:e12256. [PMID: 35942823 PMCID: PMC9451526 DOI: 10.1002/jev2.12256] [Citation(s) in RCA: 8] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/03/2021] [Revised: 04/19/2022] [Accepted: 04/30/2022] [Indexed: 11/24/2022] Open
Abstract
We developed a novel asymmetric depth filtration (DF) approach to isolate extracellular vesicles (EVs) from biological fluids that outperforms ultracentrifugation and size‐exclusion chromatography in purity and yield of isolated EVs. By these metrics, a single‐step DF matches or exceeds the performance of multistep protocols with dedicated purification procedures in the isolation of plasma EVs. We demonstrate the selective transit and capture of biological nanoparticles in asymmetric pores by size and elasticity, low surface binding to the filtration medium, and the ability to cleanse EVs held by the filter before their recovery with the reversed flow all contribute to the achieved purity and yield of preparations. We further demonstrate the method's versatility by applying it to isolate EVs from different biofluids (plasma, urine, and cell culture growth medium). The DF workflow is simple, fast, and inexpensive. Only standard laboratory equipment is required for its implementation, making DF suitable for low‐resource and point‐of‐use locations. The method may be used for EV isolation from small biological samples in diagnostic and treatment guidance applications. It can also be scaled up to harvest therapeutic EVs from large volumes of cell culture medium.
Collapse
Affiliation(s)
- Vasiliy S Chernyshev
- Skolkovo Institute of Science and Technology, Moscow, Russian Federation.,School of Biological and Medical Physics, Moscow Institute of Physics and Technology, Dolgoprudny, Moscow Region, Russian Federation
| | - Roman N Chuprov-Netochin
- School of Biological and Medical Physics, Moscow Institute of Physics and Technology, Dolgoprudny, Moscow Region, Russian Federation
| | - Ekaterina Tsydenzhapova
- School of Biological and Medical Physics, Moscow Institute of Physics and Technology, Dolgoprudny, Moscow Region, Russian Federation
| | | | - Rimma A Poltavtseva
- National Medical Research Center for Obstetrics, Gynecology and Perinatology named after Academician V.I. Kulakov, Ministry of Healthcare of the Russian Federation, Moscow, Russian Federation
| | | | - Alexey Yashchenok
- Skolkovo Institute of Science and Technology, Moscow, Russian Federation
| | | | | | - Varlam Keshelava
- Institute for Biological Instrumentation RAS, Pushchino, Russian Federation
| | - Gennadiy T Sukhikh
- National Medical Research Center for Obstetrics, Gynecology and Perinatology named after Academician V.I. Kulakov, Ministry of Healthcare of the Russian Federation, Moscow, Russian Federation
| | - Dmitry Gorin
- Skolkovo Institute of Science and Technology, Moscow, Russian Federation
| | - Sergey Leonov
- School of Biological and Medical Physics, Moscow Institute of Physics and Technology, Dolgoprudny, Moscow Region, Russian Federation
| | - Mikhail Skliar
- Department of Chemical Engineering, University of Utah, Salt Lake City, UT, USA.,The Nano Institute of Utah, University of Utah, Salt Lake City, UT, USA
| |
Collapse
|
33
|
Haque ME, Marriott L, Naeem N, Henry T, Conde AJ, Kersaudy-Kerhoas M. A low-cost, open-source centrifuge adaptor for separating large volume clinical blood samples. PLoS One 2022; 17:e0266769. [PMID: 35802693 PMCID: PMC9269434 DOI: 10.1371/journal.pone.0266769] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/18/2021] [Accepted: 03/26/2022] [Indexed: 11/18/2022] Open
Abstract
Blood plasma separation is a prerequisite in numerous biomedical assays involving low abundance plasma-borne biomarkers and thus is the fundamental step before many bioanalytical steps. High-capacity refrigerated centrifuges, which have the advantage of handling large volumes of blood samples, are widely utilized, but they are bulky, non-transportable, and prohibitively expensive for low-resource settings, with prices starting at $1,500. On the other hand, there are low-cost commercial and open-source micro-centrifuges available, but they are incapable of handling typical clinical amounts of blood samples (2-10mL). There is currently no low-cost CE marked centrifuge that can process large volumes of clinical blood samples on the market. As a solution, we customised the rotor of a commercially available low-cost micro-centrifuge (~$125) using 3D printing to enable centrifugation of large clinical blood samples in resource poor-settings. Our custom adaptor ($15) can hold two 9 mL S-Monovette tubes and achieve the same separation performance (yield, cell count, hemolysis, albumin levels) as the control benchtop refrigerated centrifuge, and even outperformed the control in platelet separation by at least four times. This low-cost open-source centrifugation system capable of processing clinical blood tubes could be valuable to low-resource settings where centrifugation is required immediately after blood withdrawal for further testing.
Collapse
Affiliation(s)
- Md Ehtashamul Haque
- Institute of Biological Chemistry, Biophysics and Bioengineering, School of Engineering and Physical Sciences, Heriot-Watt University, Edinburgh, United Kingdom
| | - Linda Marriott
- Institute of Biological Chemistry, Biophysics and Bioengineering, School of Engineering and Physical Sciences, Heriot-Watt University, Edinburgh, United Kingdom
| | - Noman Naeem
- Institute of Biological Chemistry, Biophysics and Bioengineering, School of Engineering and Physical Sciences, Heriot-Watt University, Edinburgh, United Kingdom
| | - Taygan Henry
- Institute of Biological Chemistry, Biophysics and Bioengineering, School of Engineering and Physical Sciences, Heriot-Watt University, Edinburgh, United Kingdom
| | - Alvaro J. Conde
- Institute of Biological Chemistry, Biophysics and Bioengineering, School of Engineering and Physical Sciences, Heriot-Watt University, Edinburgh, United Kingdom
- Micronit B.V., Enschede, Netherlands
| | - Maïwenn Kersaudy-Kerhoas
- Institute of Biological Chemistry, Biophysics and Bioengineering, School of Engineering and Physical Sciences, Heriot-Watt University, Edinburgh, United Kingdom
- Infection Medicine, College of Medicine and Veterinary Medicine, University of Edinburgh, Edinburgh, United Kingdom
- * E-mail:
| |
Collapse
|
34
|
Gao C, Vargas Jentzsch A, Moulin E, Giuseppone N. Light-Driven Molecular Whirligig. J Am Chem Soc 2022; 144:9845-9852. [PMID: 35605252 DOI: 10.1021/jacs.2c02547] [Citation(s) in RCA: 18] [Impact Index Per Article: 9.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/07/2023]
Abstract
A unidirectional light-driven rotary motor was looped in a figure-of-eight molecule by linking two polymer chains between its stator and rotor parts. By properly tuning the size of these linkers, clockwise rotation of the motor under UV light was shown to create conformationally strained twists between the polymer chains, and in this tensed conformation, the energy stored in the molecular object was sufficient to trigger the reverse rotation of the motor back to its fully relaxed state. The functioning principle of this motorized molecular device appears very similar to that of macroscopic whirligig crafts used by children for fun. In addition, we found that in its out-of-equilibrium tensed state, the fluorescence emission of the molecular motor increased by 500% due to the mechanical constraints imposed by the polymer chains on its conjugated core. Finally, by calculating the apparent thermal energies of activation for the backward rotations at different levels of twisting, we quantitatively determined a lower estimate of the work generated by this rotary motor, from which a torque and a force were extracted, thus answering a long-term open question in this field of research.
Collapse
Affiliation(s)
- Chuan Gao
- SAMS Research Group, Université de Strasbourg, CNRS, Institut Charles Sadron UPR 22, 67000 Strasbourg, France
| | - Andreas Vargas Jentzsch
- SAMS Research Group, Université de Strasbourg, CNRS, Institut Charles Sadron UPR 22, 67000 Strasbourg, France
| | - Emilie Moulin
- SAMS Research Group, Université de Strasbourg, CNRS, Institut Charles Sadron UPR 22, 67000 Strasbourg, France
| | - Nicolas Giuseppone
- SAMS Research Group, Université de Strasbourg, CNRS, Institut Charles Sadron UPR 22, 67000 Strasbourg, France
| |
Collapse
|
35
|
Wu M, Wu S, Wang G, Liu W, Chu LT, Jiang T, Kwong HK, Chow HL, Li IWS, Chen TH. Microfluidic particle dam for direct visualization of SARS-CoV-2 antibody levels in COVID-19 vaccinees. SCIENCE ADVANCES 2022; 8:eabn6064. [PMID: 35658040 PMCID: PMC9166397 DOI: 10.1126/sciadv.abn6064] [Citation(s) in RCA: 14] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/05/2023]
Abstract
Various COVID-19 vaccines are currently deployed, but their immunization varies and decays with time. Antibody level is a potent correlate to immune protection, but its quantitation relies on intensive laboratory techniques. Here, we report a decentralized, instrument-free microfluidic device that directly visualizes SARS-CoV-2 antibody levels. Magnetic microparticles (MMPs) and polystyrene microparticles (PMPs) can bind to SARS-CoV-2 antibodies simultaneously. In a microfluidic chip, this binding reduces the incidence of free PMPs escaping from magnetic separation and shortens PMP accumulation length at a particle dam. This visual quantitative result enables use in either sensitive mode [limit of detection (LOD): 13.3 ng/ml; sample-to-answer time: 70 min] or rapid mode (LOD: 57.8 ng/ml; sample-to-answer time: 20 min) and closely agrees with the gold standard enzyme-linked immunosorbent assay. Trials on 91 vaccinees revealed higher antibody levels in mRNA vaccinees than in inactivated vaccinees and their decay in 45 days, demonstrating the need for point-of-care devices to monitor immune protection.
Collapse
Affiliation(s)
- Minghui Wu
- Department of Biomedical Engineering, City University of Hong Kong, Hong Kong Special Administrative Region, China
| | - Siying Wu
- Department of Biomedical Engineering, City University of Hong Kong, Hong Kong Special Administrative Region, China
| | - Gaobo Wang
- Department of Biomedical Engineering, City University of Hong Kong, Hong Kong Special Administrative Region, China
| | - Wengang Liu
- Department of Biomedical Engineering, City University of Hong Kong, Hong Kong Special Administrative Region, China
| | - Lok Ting Chu
- Department of Biomedical Engineering, City University of Hong Kong, Hong Kong Special Administrative Region, China
| | - Tianyi Jiang
- Department of Biomedical Engineering, City University of Hong Kong, Hong Kong Special Administrative Region, China
| | - Hoi Kwan Kwong
- Department of Biomedical Engineering, City University of Hong Kong, Hong Kong Special Administrative Region, China
| | - Hiu Lam Chow
- Department of Biomedical Engineering, City University of Hong Kong, Hong Kong Special Administrative Region, China
| | - Iris Wai Sum Li
- HKU-Pasteur Research Pole, The University of Hong Kong, Pokfulam, Hong Kong Special Administrative Region, China
| | - Ting-Hsuan Chen
- Department of Biomedical Engineering, City University of Hong Kong, Hong Kong Special Administrative Region, China
- City University of Hong Kong Shenzhen Research Institute, Shenzhen, China
- Corresponding author.
| |
Collapse
|
36
|
Burgos-Flórez F, Rodríguez A, Cervera E, De Ávila M, Sanjuán M, Villalba PJ. Microfluidic Paper-Based Blood Plasma Separation Device as a Potential Tool for Timely Detection of Protein Biomarkers. MICROMACHINES 2022; 13:mi13050706. [PMID: 35630172 PMCID: PMC9142996 DOI: 10.3390/mi13050706] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 04/02/2022] [Revised: 04/26/2022] [Accepted: 04/26/2022] [Indexed: 01/27/2023]
Abstract
A current challenge regarding microfluidic paper-based analytical devices (µPAD) for blood plasma separation (BPS) and electrochemical immunodetection of protein biomarkers is how to achieve a µPAD that yields enough plasma to retain the biomarker for affinity biosensing in a functionalized electrode system. This paper describes the development of a BPS µPAD to detect and quantify the S100B biomarker from peripheral whole blood. The device uses NaCl functionalized VF2 filter paper as a sample collection pad, an MF1 filter paper for plasma retention, and an optimized microfluidic channel geometry. An inverted light microscope, scanning electron microscope (SEM), and image processing software were used for visualizing BPS efficiency. A design of experiments (DOE) assessed the device’s efficacy using an S100B ELISA Kit to measure clinically relevant S100B concentrations in plasma. The BPS device obtained 50 μL of plasma from 300 μL of whole blood after 3.5 min. The statistical correlation of S100B concentrations obtained using plasma from standard centrifugation and the BPS device was 0.98. The BPS device provides a simple manufacturing protocol, short fabrication time, and is capable of S100B detection using ELISA, making one step towards the integration of technologies aimed at low-cost POC testing of clinically relevant biomarkers.
Collapse
Affiliation(s)
- Francisco Burgos-Flórez
- Biotechnology Research Group, Universidad del Norte, Barranquilla 081007, Colombia; (A.R.); (E.C.); (M.D.Á.); (P.J.V.)
- Rational Use of Energy and Preservation of the Environment Group (UREMA), Universidad del Norte, Barranquilla 081007, Colombia;
- Health and Technological Innovation, Universidad Simón Bolívar, Facultad de Ingenierías, Barranquilla 080002, Colombia
- Correspondence:
| | - Alexander Rodríguez
- Biotechnology Research Group, Universidad del Norte, Barranquilla 081007, Colombia; (A.R.); (E.C.); (M.D.Á.); (P.J.V.)
| | - Eliana Cervera
- Biotechnology Research Group, Universidad del Norte, Barranquilla 081007, Colombia; (A.R.); (E.C.); (M.D.Á.); (P.J.V.)
| | - Marcio De Ávila
- Biotechnology Research Group, Universidad del Norte, Barranquilla 081007, Colombia; (A.R.); (E.C.); (M.D.Á.); (P.J.V.)
| | - Marco Sanjuán
- Rational Use of Energy and Preservation of the Environment Group (UREMA), Universidad del Norte, Barranquilla 081007, Colombia;
| | - Pedro J. Villalba
- Biotechnology Research Group, Universidad del Norte, Barranquilla 081007, Colombia; (A.R.); (E.C.); (M.D.Á.); (P.J.V.)
| |
Collapse
|
37
|
Li M, Li D, Song Y, Li D. Tunable particle/cell separation across aqueous two-phase system interface by electric pulse in microfluidics. J Colloid Interface Sci 2022; 612:23-34. [PMID: 34974255 DOI: 10.1016/j.jcis.2021.12.140] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/19/2021] [Revised: 12/10/2021] [Accepted: 12/21/2021] [Indexed: 01/16/2023]
Abstract
HYPOTHESIS Separations of particles and cells are indispensable in many microfluidic systems and have numerous applications in chemistry and biomedicine. The interface of aqueous two-phase system (ATPS) can act as a liquid filter. Under electric field stimuli, the selective transfer of targets across the liquid-liquid interface are expected for particles and cells separation. EXPERIMENTS The separations of particles and cells based on ATPS electrophoresis in a microfluidic chip were investigated. A systematical study of the mechanism of ATPS electrophoresis was performed first by employing polystyrene (PS) particles. Subsequently, the separations of particles and microalgae cells were demonstrated. FINDINGS The electrophoretic transfer of particles across the interface of ATPS is determined by multi-parameters, including the strength of electric pulse, particle size, zeta potential, and hydrophobicity of the particle. The continuous separations of particles/cells can be achieved through the controllable transfer of target particles/cells across the interface under electric pulses in a microfluidic chip. By simply turning the magnitude of the applied electric pulse, the technique is suitable for different purposes, for example, the separations of particles and cells, purification of cells, and viability identification of cells. This tunable separation approach opens opportunities in multidimensional particle and cell sorting for the fields of seed selection of microorganisms, environmental assessment, and biomedical research.
Collapse
Affiliation(s)
- Mengqi Li
- Department of Marine Engineering, Dalian Maritime University, Dalian 116026, China
| | - Deyu Li
- Department of Marine Engineering, Dalian Maritime University, Dalian 116026, China
| | - Yongxin Song
- Department of Marine Engineering, Dalian Maritime University, Dalian 116026, China
| | - Dongqing Li
- Department of Mechanical and Mechatronics Engineering, University of Waterloo, Waterloo, Ontario, Canada N2L 3G1.
| |
Collapse
|
38
|
He G, Dong T, Yang Z, Branstad A, Huang L, Jiang Z. Point-of-care COPD diagnostics: biomarkers, sampling, paper-based analytical devices, and perspectives. Analyst 2022; 147:1273-1293. [PMID: 35113085 DOI: 10.1039/d1an01702k] [Citation(s) in RCA: 6] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/14/2022]
Abstract
Chronic obstructive pulmonary disease (COPD) has become the third leading cause of global death. Insufficiency in early diagnosis and treatment of COPD, especially COPD exacerbations, leads to a tremendous economic burden and medical costs. A cost-effective and timely prevention requires decentralized point-of-care diagnostics at patients' residences at affordable prices. Advances in point-of-care (POC) diagnostics may offer new solutions to reduce medical expenditures by measuring salivary and blood biomarkers. Among them, paper-based analytical devices have been the most promising candidates due to their advantages of being affordable, biocompatible, disposable, scalable, and easy to modify. In this review, we present salivary and blood biomarkers related to COPD endotypes and exacerbations, summarize current technologies to collect human whole saliva and whole blood samples, evaluate state-of-the-art paper-based analytical devices that detect COPD biomarkers in saliva and blood, and discuss existing challenges with outlooks on future paper-based POC systems for COPD diagnosis and management.
Collapse
Affiliation(s)
- Guozhen He
- Chongqing Key Laboratory of Micro-Nano Systems and Smart Transduction, Chongqing Key Laboratory of Colleges and Universities on Micro-Nano Systems Technology and Smart Transducing, Collaborative Innovation Center on Micro-Nano Transduction and Intelligent Eco-Internet of Things, Chongqing Academician and Expert Workstation, Chongqing Technology and Business University, Nan'an District, Chongqing 400067, China.,Department of Microsystems (IMS), Faculty of Technology, Natural Sciences and Maritime Sciences, University of South-Eastern Norway, Postboks 235, 3603 Kongsberg, Norway.
| | - Tao Dong
- Department of Microsystems (IMS), Faculty of Technology, Natural Sciences and Maritime Sciences, University of South-Eastern Norway, Postboks 235, 3603 Kongsberg, Norway.
| | - Zhaochu Yang
- Chongqing Key Laboratory of Micro-Nano Systems and Smart Transduction, Chongqing Key Laboratory of Colleges and Universities on Micro-Nano Systems Technology and Smart Transducing, Collaborative Innovation Center on Micro-Nano Transduction and Intelligent Eco-Internet of Things, Chongqing Academician and Expert Workstation, Chongqing Technology and Business University, Nan'an District, Chongqing 400067, China
| | - Are Branstad
- University of Southeast Norway (USN), School of Business, Box 235, 3603 Kongsberg, Norway
| | - Lan Huang
- Chongqing Key Laboratory of Micro-Nano Systems and Smart Transduction, Chongqing Key Laboratory of Colleges and Universities on Micro-Nano Systems Technology and Smart Transducing, Collaborative Innovation Center on Micro-Nano Transduction and Intelligent Eco-Internet of Things, Chongqing Academician and Expert Workstation, Chongqing Technology and Business University, Nan'an District, Chongqing 400067, China
| | - Zhuangde Jiang
- Chongqing Key Laboratory of Micro-Nano Systems and Smart Transduction, Chongqing Key Laboratory of Colleges and Universities on Micro-Nano Systems Technology and Smart Transducing, Collaborative Innovation Center on Micro-Nano Transduction and Intelligent Eco-Internet of Things, Chongqing Academician and Expert Workstation, Chongqing Technology and Business University, Nan'an District, Chongqing 400067, China
| |
Collapse
|
39
|
Page R, Scourfield E, Ficarelli M, McKellar SW, Lee KL, Maguire TJ, Bouton C, Lista MJ, Neil SJ, Malim MH, Zuckerman M, Mischo HE, Martinez-Nunez RT. Homebrew: An economical and sensitive glassmilk-based nucleic-acid extraction method for SARS-CoV-2 diagnostics. CELL REPORTS METHODS 2022; 2:100186. [PMID: 35262039 PMCID: PMC8890991 DOI: 10.1016/j.crmeth.2022.100186] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 08/25/2021] [Revised: 12/26/2021] [Accepted: 02/25/2022] [Indexed: 12/22/2022]
Abstract
Management of COVID-19 and other epidemics requires large-scale diagnostic testing. The gold standard for severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection remains reverse transcription quantitative PCR (qRT-PCR) analysis, which detects viral RNA more sensitively than any other method. However, the resource use and supply-chain requirements of RT-PCR have continued to challenge diagnostic laboratories worldwide. Here, we establish and characterize a low-cost method to detect SARS-CoV-2 in clinical combined nose and throat swabs, allowing for automation in high-throughput settings. This method inactivates virus material with sodium dodecylsulfate (SDS) and uses silicon dioxide as the RNA-binding matrix in combination with sodium chloride (NaCl) and isopropanol. With similar sensitivity for SARS-CoV-2 viral targets but a fraction of time and reagent expenditure compared with commercial kits, our method also enables sample pooling without loss of sensitivity. We suggest that this method will facilitate more economical widespread testing, particularly in resource-limited settings.
Collapse
Affiliation(s)
- Robert Page
- ImmunoEngineering Lab, School of Cancer and Pharmaceutical Sciences, King's College London, Guy's Cancer Centre, Great Maze Pond, London SE1 9RT, UK
| | - Edward Scourfield
- Department Infectious Diseases, School of Immunology and Microbial Sciences, Guy’s Campus, King’s College London, London SE1 9RT, UK
| | - Mattia Ficarelli
- Department Infectious Diseases, School of Immunology and Microbial Sciences, Guy’s Campus, King’s College London, London SE1 9RT, UK
| | - Stuart W. McKellar
- Department Infectious Diseases, School of Immunology and Microbial Sciences, Guy’s Campus, King’s College London, London SE1 9RT, UK
| | - Kwok Leung Lee
- Department Infectious Diseases, School of Immunology and Microbial Sciences, Guy’s Campus, King’s College London, London SE1 9RT, UK
| | - Thomas J.A. Maguire
- Department Infectious Diseases, School of Immunology and Microbial Sciences, Guy’s Campus, King’s College London, London SE1 9RT, UK
| | - Clement Bouton
- Department Infectious Diseases, School of Immunology and Microbial Sciences, Guy’s Campus, King’s College London, London SE1 9RT, UK
| | - Maria Jose Lista
- Department Infectious Diseases, School of Immunology and Microbial Sciences, Guy’s Campus, King’s College London, London SE1 9RT, UK
| | - Stuart J.D. Neil
- Department Infectious Diseases, School of Immunology and Microbial Sciences, Guy’s Campus, King’s College London, London SE1 9RT, UK
| | - Michael H. Malim
- Department Infectious Diseases, School of Immunology and Microbial Sciences, Guy’s Campus, King’s College London, London SE1 9RT, UK
| | - Mark Zuckerman
- South London Specialist Virology Centre, King’s College Hospital London, London, UK
| | - Hannah E. Mischo
- Department Infectious Diseases, School of Immunology and Microbial Sciences, Guy’s Campus, King’s College London, London SE1 9RT, UK
| | - Rocio T. Martinez-Nunez
- Department Infectious Diseases, School of Immunology and Microbial Sciences, Guy’s Campus, King’s College London, London SE1 9RT, UK
| |
Collapse
|
40
|
Fu J, Zhang L, Wang SL, Yuan WL, Zhang GH, Zhu QH, Chen H, He L, Tao GH. Ultralow-cost portable device for cesium detection via perovskite fluorescence. JOURNAL OF HAZARDOUS MATERIALS 2022; 425:127981. [PMID: 34883380 DOI: 10.1016/j.jhazmat.2021.127981] [Citation(s) in RCA: 8] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/04/2021] [Revised: 11/21/2021] [Accepted: 12/01/2021] [Indexed: 06/13/2023]
Abstract
Public anxiety and concern from cesium pollution in oceans have been back on the agenda since tons of nuclear waste water were announced to be poured into oceans. Cesium ion can easily enter organisms and bioaccumulate in animals and plants, thus its harm is chronic to humans through food chains. Here we showed a kind of hybrid ionic liquid membrane (HILM) for detection of cesium ion in seawater through CsPbBr3 perovskite fluorescence. With sustainability in mind, HILM was built frugally. The lowest cost of HILM is below 3 cents per piece. The HILM can detect cesium ion quickly with eye-readable fluorescence signal. Ultracheap, portable, easy-to-use on-site detection device could offer benefit for personal security and applications in environment science and ecology in the future decades.
Collapse
Affiliation(s)
- Jie Fu
- College of Chemistry, Sichuan University, Chengdu, Sichuan 610064, China
| | - Lei Zhang
- College of Chemistry, Sichuan University, Chengdu, Sichuan 610064, China
| | - Shuang-Long Wang
- College of Chemistry, Sichuan University, Chengdu, Sichuan 610064, China
| | - Wen-Li Yuan
- College of Chemistry, Sichuan University, Chengdu, Sichuan 610064, China
| | - Guo-Hao Zhang
- College of Chemistry, Sichuan University, Chengdu, Sichuan 610064, China
| | - Qiu-Hong Zhu
- College of Chemistry, Sichuan University, Chengdu, Sichuan 610064, China
| | - Hao Chen
- College of Chemistry, Sichuan University, Chengdu, Sichuan 610064, China
| | - Ling He
- College of Chemistry, Sichuan University, Chengdu, Sichuan 610064, China
| | - Guo-Hong Tao
- College of Chemistry, Sichuan University, Chengdu, Sichuan 610064, China.
| |
Collapse
|
41
|
Trick AY, Ngo HT, Nambiar AH, Morakis MM, Chen FE, Chen L, Hsieh K, Wang TH. Filtration-assisted magnetofluidic cartridge platform for HIV RNA detection from blood. LAB ON A CHIP 2022; 22:945-953. [PMID: 35088790 PMCID: PMC9035341 DOI: 10.1039/d1lc00820j] [Citation(s) in RCA: 12] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
The ability to detect and quantify HIV RNA in blood is essential to sensitive detection of infections and monitoring viremia throughout treatment. Current options for point-of-care HIV diagnosis (i.e. lateral flow rapid tests) lack sensitivity for early detection and are unable to quantify viral load. HIV RNA diagnostics typically require extensive pre-processing of blood to isolate plasma and extract nucleic acids, in addition to expensive equipment for conducting nucleic acid amplification and fluorescence detection. Therefore, molecular HIV diagnostics is still mainly limited to clinical laboratories and there is an unmet need for high sensitivity point-of-care screening and at-home HIV viral load quantification. In this work, we outline a streamlined workflow for extraction of plasma from whole blood coupled with HIV RNA extraction and quantitative polymerase chain reaction (qPCR) in a portable magnetofluidic cartridge platform for use at the point-of-care. Viral particles were isolated from blood using manual filtration through a 3D-printed filter module in seconds followed by automated nucleic acid capture, purification, and transfer to qPCR using magnetic beads. Both nucleic acid extraction and qPCR were integrated within cartridges using compact instrumentation consisting of a motorized magnet arm, miniaturized thermocycler, and image-based fluorescence detection. We demonstrated detection down to 1000 copies of HIV viral particles from whole blood in <30 minutes.
Collapse
Affiliation(s)
- Alexander Y Trick
- Department of Biomedical Engineering, Johns Hopkins University, Baltimore, MD 21218, USA.
| | - Hoan Thanh Ngo
- Department of Mechanical Engineering, Johns Hopkins University, Baltimore, MD 21218, USA
| | - Anju H Nambiar
- Department of Biomedical Engineering, Johns Hopkins University, Baltimore, MD 21218, USA.
| | - Marisa M Morakis
- Department of Biomedical Engineering, Johns Hopkins University, Baltimore, MD 21218, USA.
| | - Fan-En Chen
- Department of Biomedical Engineering, Johns Hopkins University, Baltimore, MD 21218, USA.
| | - Liben Chen
- Department of Mechanical Engineering, Johns Hopkins University, Baltimore, MD 21218, USA
| | - Kuangwen Hsieh
- Department of Mechanical Engineering, Johns Hopkins University, Baltimore, MD 21218, USA
| | - Tza-Huei Wang
- Department of Biomedical Engineering, Johns Hopkins University, Baltimore, MD 21218, USA.
- Department of Mechanical Engineering, Johns Hopkins University, Baltimore, MD 21218, USA
- Institute for NanoBioTechnology, Johns Hopkins University, Baltimore, MD 21218, USA
| |
Collapse
|
42
|
The LEGO® brick road to open science and biotechnology. Trends Biotechnol 2022; 40:1073-1087. [DOI: 10.1016/j.tibtech.2022.02.003] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/17/2021] [Revised: 02/04/2022] [Accepted: 02/11/2022] [Indexed: 11/19/2022]
|
43
|
Chen CJ, Hudson AF, Jia AS, Kunchur CR, Song AJ, Tran E, Fisher CJ, Zanchi D, Lee L, Kargotich S, Romeo M, Koperniku A, Pamnani RD, Mochly-Rosen D. Affordable IgY-based antiviral prophylaxis for resource-limited settings to address epidemic and pandemic risks. J Glob Health 2022; 12:05009. [PMID: 35265332 PMCID: PMC8877785 DOI: 10.7189/jogh.12.05009] [Citation(s) in RCA: 10] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/24/2022] Open
Abstract
Background The COVID-19 pandemic caused by SARS-CoV-2 exposed a global problem, as highly effective vaccines are challenging to produce and distribute, particularly in regions with limited resources and funding. As an alternative, immunoglobulins produced in eggs of immunized hens (IgY) can be a simple and inexpensive source for a topical and temporary prophylaxis. Here, we developed a method to extract and purify IgY antibodies from egg yolks of hens immunized against viral pathogen-derived proteins using low-cost, readily available materials, for use in resource-limited settings. Methods Existing protocols for IgY purification and equipment were modified, including extraction from yolks and separation of water-soluble IgY using common household reagents and tools. A replacement for a commercial centrifuge was developed, using a home food processor equipped with a 3D printed adapter to enable IgY precipitation. IgY purification was verified using standard gel electrophoresis and Western blot analyses. Results We developed a step-by-step protocol for IgY purification for two settings in low- and middle-income countries (LMIC): a local laboratory, where commercial centrifuges are available, or a more rural setting, where an alternative for expensive centrifuges can be used. Gel electrophoresis and Western blot analyses confirmed that the method produced highly enriched IgY preparation; each commercial egg produced ~ 90 mg of IgY. We also designed a kit for IgY production in these two settings and provided a cost estimate of the kit. Conclusion IgY purified from eggs of immunized local hens can offer a fast and affordable prophylaxis, provided that purification can be performed in a resource-limited setting. Here, we created a low-cost method that can be used anywhere where electricity is available using inexpensive, readily available materials in place of costly, specialized laboratory equipment and chemicals. This procedure can readily be used now to make an anti-SARS-CoV-2 prophylaxis in areas where vaccines are unavailable, and can be modified to combat future threats from viral epidemics and pandemics.
Collapse
Affiliation(s)
- Carrie J Chen
- Office of the Vice Provost for Undergraduate Education, Stanford University, Stanford, California, USA
| | - Anna F Hudson
- Office of the Vice Provost for Undergraduate Education, Stanford University, Stanford, California, USA
| | - Allison S Jia
- Office of the Vice Provost for Undergraduate Education, Stanford University, Stanford, California, USA
| | - Caitlin R Kunchur
- Office of the Vice Provost for Undergraduate Education, Stanford University, Stanford, California, USA
| | - Andrew J Song
- Office of the Vice Provost for Undergraduate Education, Stanford University, Stanford, California, USA
| | - Edward Tran
- Office of the Vice Provost for Undergraduate Education, Stanford University, Stanford, California, USA
| | - Chris J Fisher
- Department of Comparative Medicine, Stanford University School of Medicine, Stanford, California, USA
| | - Davide Zanchi
- Graduate School of Business, Stanford University, Stanford, California, USA
| | - Lucia Lee
- Department of Chemical and Systems Biology, Stanford University School of Medicine, Stanford, California, USA
| | - Stephen Kargotich
- SPARK at Stanford, Stanford University School of Medicine, Stanford, California, USA
| | - Mary Romeo
- SPARK at Stanford, Stanford University School of Medicine, Stanford, California, USA
| | - Ana Koperniku
- Department of Chemical and Systems Biology, Stanford University School of Medicine, Stanford, California, USA
| | - Ravinder D Pamnani
- Stanford Byers Center for Biodesign, Stanford University, Stanford, California, USA
| | - Daria Mochly-Rosen
- Department of Chemical and Systems Biology, Stanford University School of Medicine, Stanford, California, USA
- SPARK at Stanford, Stanford University School of Medicine, Stanford, California, USA
| |
Collapse
|
44
|
Yang SM, Lv S, Zhang W, Cui Y. Microfluidic Point-of-Care (POC) Devices in Early Diagnosis: A Review of Opportunities and Challenges. SENSORS (BASEL, SWITZERLAND) 2022; 22:1620. [PMID: 35214519 PMCID: PMC8875995 DOI: 10.3390/s22041620] [Citation(s) in RCA: 49] [Impact Index Per Article: 24.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 12/30/2021] [Revised: 02/07/2022] [Accepted: 02/11/2022] [Indexed: 12/12/2022]
Abstract
The early diagnosis of infectious diseases is critical because it can greatly increase recovery rates and prevent the spread of diseases such as COVID-19; however, in many areas with insufficient medical facilities, the timely detection of diseases is challenging. Conventional medical testing methods require specialized laboratory equipment and well-trained operators, limiting the applicability of these tests. Microfluidic point-of-care (POC) equipment can rapidly detect diseases at low cost. This technology could be used to detect diseases in underdeveloped areas to reduce the effects of disease and improve quality of life in these areas. This review details microfluidic POC equipment and its applications. First, the concept of microfluidic POC devices is discussed. We then describe applications of microfluidic POC devices for infectious diseases, cardiovascular diseases, tumors (cancer), and chronic diseases, and discuss the future incorporation of microfluidic POC devices into applications such as wearable devices and telemedicine. Finally, the review concludes by analyzing the present state of the microfluidic field, and suggestions are made. This review is intended to call attention to the status of disease treatment in underdeveloped areas and to encourage the researchers of microfluidics to develop standards for these devices.
Collapse
Grants
- BRA2017216, BE2018627,2020THRC-GD-7, D18003, LM201603, KFKT2018001 the 333 project of Jiangsu Province in 2017, the Primary Research & Development Plan of Jiangsu Province, the Taihu Lake talent plan, the Complex and Intelligent Research Center, School of Mechanical and Power Engineering, East China University of Scien
- NSFC81971511 the National Natural Sciences Foundation of China
Collapse
Affiliation(s)
- Shih-Mo Yang
- School of Mechatronic Engineering and Automation, Shanghai University, Shanghai 200444, China; (S.-M.Y.); (S.L.)
| | - Shuangsong Lv
- School of Mechatronic Engineering and Automation, Shanghai University, Shanghai 200444, China; (S.-M.Y.); (S.L.)
| | - Wenjun Zhang
- Division of Biomedical Engineering, University of Saskatchewan, Saskatoon, SK S7N 5A9, Canada;
| | - Yubao Cui
- Clinical Research Center, The Affiliated Wuxi People’s Hospital, Nanjing Medical University, 299 Qingyang Road, Wuxi 214023, China
| |
Collapse
|
45
|
Chan J, Michaelsen K, Estergreen JK, Sabath DE, Gollakota S. Micro-mechanical blood clot testing using smartphones. Nat Commun 2022; 13:831. [PMID: 35149711 PMCID: PMC8837659 DOI: 10.1038/s41467-022-28499-y] [Citation(s) in RCA: 9] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/21/2021] [Accepted: 01/26/2022] [Indexed: 11/09/2022] Open
Abstract
Frequent prothrombin time (PT) and international normalized ratio (INR) testing is critical for millions of people on lifelong anticoagulation with warfarin. Currently, testing is performed in hospital laboratories or with expensive point-of-care devices limiting the ability to test frequently and affordably. We report a proof-of-concept PT/INR testing system that uses the vibration motor and camera on smartphones to track micro-mechanical movements of a copper particle. The smartphone system computed the PT/INR with inter-class correlation coefficients of 0.963 and 0.966, compared to a clinical-grade coagulation analyzer for 140 plasma samples and demonstrated similar results for 80 whole blood samples using a single drop of blood (10 μl). When tested with 79 blood samples with coagulopathic conditions, the smartphone system demonstrated a correlation of 0.974 for both PT/INR. Given the ubiquity of smartphones in the global setting, this proof-of-concept technology may provide affordable and effective PT and INR testing in low-resource environments. Therapy with anticoagulants requires frequent monitoring. Here the authors describe a proof-of-concept study of a simple and affordable blood clot test that uses a smartphone’s vibration motor and camera to track micro-movements in a single drop of blood.
Collapse
Affiliation(s)
- Justin Chan
- Paul G. Allen School of Computer Science and Engineering, University of Washington, Seattle, WA, USA.
| | - Kelly Michaelsen
- Department of Anesthesiology & Pain Medicine, University of Washington, Seattle, WA, USA.
| | - Joanne K Estergreen
- Department of Laboratory Medicine & Pathology, University of Washington, Seattle, WA, USA
| | - Daniel E Sabath
- Department of Laboratory Medicine & Pathology, University of Washington, Seattle, WA, USA
| | - Shyamnath Gollakota
- Paul G. Allen School of Computer Science and Engineering, University of Washington, Seattle, WA, USA.
| |
Collapse
|
46
|
A diagnostic platform for rapid, simultaneous quantification of procalcitonin and C-reactive protein in human serum. EBioMedicine 2022; 76:103867. [PMID: 35149284 PMCID: PMC8841998 DOI: 10.1016/j.ebiom.2022.103867] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/18/2021] [Revised: 01/12/2022] [Accepted: 01/19/2022] [Indexed: 01/08/2023] Open
Abstract
Background Early and accurate determination of bacterial infections as a potential cause for a patient's systemic inflammatory response is required for timely administration of appropriate treatment and antibiotic stewardship. Procalcitonin (PCT) and C-reactive protein (CRP) have both been used as biomarkers to infer bacterial infections, particularly in the context of sepsis. There is an urgent need to develop a platform for simultaneous quantification of PCT and CRP, to enable the potential use of these biomarkers at the point-of-care. Methods A multiplexed lateral flow assay (LFA) and a fluorescence optical reader were developed. Assay performance was validated by testing spiked antigens in the buffer, followed by a validation study comparing results with conventional assays (Roche Cobas e411 Elecsys PCT and Siemens ADVIA XPT CRP) in 25 archived remnant human serum samples. Findings A linear regression correlation of 0·97 (P < 0·01) was observed for PCT, and a correlation of 0·95 (P < 0·01) was observed for CRP using direct patient samples. We also validated our platform's ability to accurately quantify high-dose CRP in the hook effect range where excess unlabeled analytes occupy binding sites at test lines. Interpretation A fluorescence reader-based duplex LFA for simultaneous quantification of PCT and CRP was developed and successfully validated with clinical samples. The rapid, portable, and low-cost nature of the platform offers potential for differentiation of bacterial and viral infections in emergency and low-resource settings at the point-of-care. Funding NIH/NIBIB Award 1R01EB021331, and Academic Venture Fund from the Atkinson Center for a Sustainable Future at Cornell University.
Collapse
|
47
|
Pan Z, Nong X, Xie Y, Li Y, Zeng H, Liang Y, Zhang M. Field Determination of Phosphate in Environmental Water by Using a Hand-Powered Paper Centrifuge for Preconcentration and Digital Image Colorimetric Sensing. JOURNAL OF ANALYTICAL METHODS IN CHEMISTRY 2022; 2022:7359197. [PMID: 35083094 PMCID: PMC8786554 DOI: 10.1155/2022/7359197] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 10/10/2021] [Revised: 12/22/2021] [Accepted: 12/27/2021] [Indexed: 06/14/2023]
Abstract
Phosphate concentration in natural water has been used as a water quality indicator, as it is one of the major nutrients for aquatic plants. However, the traditional phosphomolybdenum blue (PMB) method has limited sensitivity for visual or camera-based detection, leading to underestimation of the phosphate concentration. We present an ultralow-cost, rapid field preconcentration and digital image colorimetric sensing of low-concentration phosphate method for water analysis. A novel hand-powered paper centrifuge (paperfuge) is used for sample preparation and preconcentration. This paperfuge is made of two circular paper discs and a string. Six centrifuge tubes (CTs) originally used as glue dispensing tips with a sample capacity of ∼230 μL, are loaded on the paperfuge. After sampling, phosphate in the water sample is reacted to form PMB. Then, the reacted sample is drawn into a CT using an autopipette before the CT bottom is sealed by glue. After Oasis® HLB sorbents are added through the top of the CT, the CT top is also sealed with glue. The HLB sorbents adsorb PMB and are accumulated in the CT tip through centrifugation. The CT tips are cut and analyzed with the ImageJ software. It was found that the blue color intensity of sorbents is in a linear relationship to the phosphate concentration, with a linear range of 0-5 μM (r 2 = 0.9921) and limit of detection of 0.19 μM. In addition, this method has been applied to in-field water analysis. The results are in agreement with the standard PMB method.
Collapse
Affiliation(s)
- Zhen Pan
- School of Life and Environmental Sciences, Guilin University of Electronic Technology, Guilin, Guangxi 541004, China
| | - Xiaozhan Nong
- School of Life and Environmental Sciences, Guilin University of Electronic Technology, Guilin, Guangxi 541004, China
| | - Yajing Xie
- School of Life and Environmental Sciences, Guilin University of Electronic Technology, Guilin, Guangxi 541004, China
| | - Yan Li
- School of Life and Environmental Sciences, Guilin University of Electronic Technology, Guilin, Guangxi 541004, China
| | - Hui Zeng
- School of Life and Environmental Sciences, Guilin University of Electronic Technology, Guilin, Guangxi 541004, China
| | - Ying Liang
- School of Life and Environmental Sciences, Guilin University of Electronic Technology, Guilin, Guangxi 541004, China
| | - Min Zhang
- School of Life and Environmental Sciences, Guilin University of Electronic Technology, Guilin, Guangxi 541004, China
| |
Collapse
|
48
|
Xiang N, Ni Z. Hand-Powered Inertial Microfluidic Syringe-Tip Centrifuge. BIOSENSORS 2021; 12:14. [PMID: 35049644 PMCID: PMC8774109 DOI: 10.3390/bios12010014] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 11/27/2021] [Revised: 12/27/2021] [Accepted: 12/28/2021] [Indexed: 12/05/2022]
Abstract
Conventional sample preparation techniques require bulky and expensive instruments and are not compatible with next-generation point-of-care diagnostic testing. Here, we report a manually operated syringe-tip inertial microfluidic centrifuge (named i-centrifuge) for high-flow-rate (up to 16 mL/min) cell concentration and experimentally demonstrate its working mechanism and performance. Low-cost polymer films and double-sided tape were used through a rapid nonclean-room process of laser cutting and lamination bonding to construct the key components of the i-centrifuge, which consists of a syringe-tip flow stabilizer and a four-channel paralleled inertial microfluidic concentrator. The unstable liquid flow generated by the manual syringe was regulated and stabilized with the flow stabilizer to power inertial focusing in a four-channel paralleled concentrator. Finally, we successfully used our i-centrifuge for manually operated cell concentration. This i-centrifuge offers the advantages of low device cost, simple hand-powered operation, high-flow-rate processing, and portable device volume. Therefore, it holds potential as a low-cost, portable sample preparation tool for point-of-care diagnostic testing.
Collapse
Affiliation(s)
- Nan Xiang
- School of Mechanical Engineering, Jiangsu Key Laboratory for Design and Manufacture of Micro-Nano Biomedical Instruments, Southeast University, Nanjing 211189, China;
- State Key Laboratory of Bioelectronics, Southeast University, Nanjing 210096, China
| | - Zhonghua Ni
- School of Mechanical Engineering, Jiangsu Key Laboratory for Design and Manufacture of Micro-Nano Biomedical Instruments, Southeast University, Nanjing 211189, China;
- State Key Laboratory of Bioelectronics, Southeast University, Nanjing 210096, China
| |
Collapse
|
49
|
Li J, Wu X, Li Y, Wang X, Huang H, Jian D, Shan Y, Zhang Y, Wu C, Tan G, Wang S, Liu F. Amplification-free smartphone-based attomolar HBV detection. Biosens Bioelectron 2021; 194:113622. [PMID: 34543826 DOI: 10.1016/j.bios.2021.113622] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/09/2021] [Revised: 09/01/2021] [Accepted: 09/10/2021] [Indexed: 01/17/2023]
Abstract
Classical gold standard HBV detection relies on expensive devices and complicated procedures, thus is always restricted in large-scale hospitals and centers for disease control and prevention. To extend HBV detection to primary clinics especially in underdeveloped areas, we design amplification-free smartphone-based attomolar HBV detecting technique based on single molecule sensing. Verified by synthesized HBV target DNA, this technique reaches a detection limit at attomolar concentration (100 aM); and verified by 110 clinical samples, it also reaches a rather high sensitivity of 104 copy/mL (≈2000 IU/mL) with a high accuracy of 93.64% certificated by gold standard HBV detecting devices. Besides, this technique can quantify HBV viral load in 70 min only using portable and inexpensive devices as well as simple operations. Because of its cost-effective, field-portable and operable design, highly sensitive and selective detecting capability and wireless data connectivity, this technique can be potentially used in mobile HBV diagnoses and share HBV epidemic information especially in resource limited situations.
Collapse
Affiliation(s)
- Jiahao Li
- Joint International Research Laboratory of Animal Health and Food Safety of Ministry of Education & Single Molecule Nanometry Laboratory (Sinmolab), Nanjing Agricultural University, Nanjing, Jiangsu, 210095, China
| | - Xuping Wu
- The Second Hospital of Nanjing, Nanjing University of Chinese Medicine, Nanjing, 210003, China
| | - Yue Li
- Joint International Research Laboratory of Animal Health and Food Safety of Ministry of Education & Single Molecule Nanometry Laboratory (Sinmolab), Nanjing Agricultural University, Nanjing, Jiangsu, 210095, China
| | - Xin Wang
- Joint International Research Laboratory of Animal Health and Food Safety of Ministry of Education & Single Molecule Nanometry Laboratory (Sinmolab), Nanjing Agricultural University, Nanjing, Jiangsu, 210095, China
| | - Huachuan Huang
- School of Manufacture Science and Engineering, Key Laboratory of Testing Technology for Manufacturing Process, Ministry of Education, Southwest University of Science and Technology, Mianyang, 621010, China
| | - Dan Jian
- OptiX+ Laboratory, Wuxi, Jiangsu, 214000, China
| | - Yanke Shan
- Joint International Research Laboratory of Animal Health and Food Safety of Ministry of Education & Single Molecule Nanometry Laboratory (Sinmolab), Nanjing Agricultural University, Nanjing, Jiangsu, 210095, China
| | - Yue Zhang
- Joint International Research Laboratory of Animal Health and Food Safety of Ministry of Education & Single Molecule Nanometry Laboratory (Sinmolab), Nanjing Agricultural University, Nanjing, Jiangsu, 210095, China
| | - Chengcheng Wu
- Joint International Research Laboratory of Animal Health and Food Safety of Ministry of Education & Single Molecule Nanometry Laboratory (Sinmolab), Nanjing Agricultural University, Nanjing, Jiangsu, 210095, China
| | - Guolei Tan
- The Second Hospital of Nanjing, Nanjing University of Chinese Medicine, Nanjing, 210003, China
| | - Shouyu Wang
- Joint International Research Laboratory of Animal Health and Food Safety of Ministry of Education & Single Molecule Nanometry Laboratory (Sinmolab), Nanjing Agricultural University, Nanjing, Jiangsu, 210095, China; OptiX+ Laboratory, Wuxi, Jiangsu, 214000, China.
| | - Fei Liu
- Joint International Research Laboratory of Animal Health and Food Safety of Ministry of Education & Single Molecule Nanometry Laboratory (Sinmolab), Nanjing Agricultural University, Nanjing, Jiangsu, 210095, China.
| |
Collapse
|
50
|
Wu D, Ding Y, Zhang Y, Pan D, Li J, Hu Y, Xu B, Chu J. 3D microfluidic cloth-based analytical devices on a single piece of cloth by one-step laser hydrophilicity modification. LAB ON A CHIP 2021; 21:4805-4813. [PMID: 34734609 DOI: 10.1039/d1lc00639h] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
In this work, we report for the first time a simple and robust method for constructing a 3D microfluidic analytical device on a single piece of hydrophobic cotton cloth. Specifically, laser scanning technology was applied to process hydrophilic regions at the top and bottom of a single piece of hydrophobic cloth. Symmetrical hydrophilic regions at the bottom and top constituted vertical microfluidic channels, and asymmetrical hydrophilic regions constituted transverse flow channels. Liquid flow velocity in 3D cloth-based microchannels can be adjusted flexibly by modifying laser parameters, and programmable laser scanning can be utilized to process 3D microfluidic devices with various patterns. Single-piece 3D cloth-based microfluidic devices formed via this method can be used in many fields such as information encryption and anti-counterfeiting, multi-liquid printing and liquid mixing dilution. Compared to traditional processing methods of 3D cloth-based microfluidic devices, the laser scanning method eliminates multiple complex and repetitive assembly processes, which is a significant advance in this research area. This processing method provides a new option for fast and large-scale manufacturing of 3D cloth-based microfluidic analysis devices for point-of-care testing application in undeveloped regions/countries.
Collapse
Affiliation(s)
- Dong Wu
- CAS Key Laboratory of Mechanical Behavior and Design of Materials, Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China, Hefei 230026, China.
| | - Yinlong Ding
- CAS Key Laboratory of Mechanical Behavior and Design of Materials, Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China, Hefei 230026, China.
| | - Yuxuan Zhang
- CAS Key Laboratory of Mechanical Behavior and Design of Materials, Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China, Hefei 230026, China.
| | - Deng Pan
- CAS Key Laboratory of Mechanical Behavior and Design of Materials, Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China, Hefei 230026, China.
| | - Jiawen Li
- CAS Key Laboratory of Mechanical Behavior and Design of Materials, Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China, Hefei 230026, China.
| | - Yanlei Hu
- CAS Key Laboratory of Mechanical Behavior and Design of Materials, Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China, Hefei 230026, China.
| | - Bing Xu
- School of Mechanical Engineering, Suzhou University of Science and Technology, Suzhou 215009, China.
| | - Jiaru Chu
- CAS Key Laboratory of Mechanical Behavior and Design of Materials, Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China, Hefei 230026, China.
| |
Collapse
|