Stability of SARS-CoV-2 on critical personal protective equipment

Persistence of two coronaviruses and efficacy of steam vapor disinfection on two types of carpet

BACKGROUND

Coronaviruses, a group of highly transmissible and potentially pathogenic viruses, can be transmitted indirectly to humans via fomites. To date, no study has investigated their persistence on carpet fibers. Establishing persistence is essential before testing the efficacy of a disinfectant.

METHODS

The persistence of BCoV and HCoV OC43 on polyethylene terephthalate (PET) and nylon carpet was first determined using infectivity and RT-qPCR assays. Then, the disinfectant efficacy of steam vapor was evaluated against both coronaviruses on nylon carpet.

RESULTS

Immediately after inoculation of carpet coupons, 32.50% of BCoV and 3.87% of HCoV OC43 were recovered from PET carpet, compared to 34.86% of BCoV and 24.37% of HCoV OC43 recovered from nylon carpet. After incubation at room temperature for 1 h, BCoV and HCoV OC43 showed a 3.6 and > 2.8 log10 TCID50 reduction on PET carpet, and a 0.6 and 1.8 log10 TCID50 reduction on nylon carpet. Based on first-order decay kinetics, the whole gRNA of BCoV and HCoV OC43 were stable with k values of 1.19 and 0.67 h- 1 on PET carpet and 0.86 and 0.27 h- 1 on nylon carpet, respectively. A 15-s steam vapor treatment achieved a > 3.0 log10 TCID50 reduction of BCoV and > 3.2 log10 TCID50 reduction of HCoV OC43 on nylon carpet.

CONCLUSION

BCoV was more resistant to desiccation on both carpet types than HCoV OC43. Both viruses lost infectivity quicker on PET carpet than on nylon carpet. Steam vapor inactivated both coronaviruses on nylon carpet within 15 s.

Nanoscale hyperthermia mesostructures for sustainable antimicrobial design

Sustainability is critical in addressing global challenges posed by prolonged pandemics that impact health, economies, and the environment. Here, we introduce a molecular engineering approach for thermoregulated antimicrobial management inspired by firewalking rituals. The study uses in situ spectroscopy and multi-scale modeling to validate a hierarchical design. Efficient light-to-thermal energy conversion is achieved by engineering the molecular band structure. Rapid nanoscale hyperthermia is facilitated through thermal engineering. This approach significantly reduces the half-life of pathogens such as Escherichia coli, influenza A, and severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) to 1.4 min while maintaining a low perceived temperature on human skin. Standard disease infection and epidemic models show this technology's potential to flatten outbreak curves and delay peak infection rates, which is crucial during the early stages of pandemics when developing vaccines and antiviral drugs takes time. The scalable manufacturing and broad antimicrobial applicability hold great promise for controlling emerging infectious diseases and diverse bioprotective applications.

Potential for Glove Risk Amplification via Direct Physical, Chemical, and Microbiological Contamination

This review focuses on the potential direct physical, chemical, and microbiological contamination from disposable gloves when utilized in food environments, inclusive of the risks posed to food products as well as worker safety. Unrecognized problems endemic to glove manufacturing were magnified during the COVID-19 pandemic due to high demand, increased focus on PPE performance, availability, supply chain instability, and labor shortages. Multiple evidence-based reports of contamination, toxicity, illness, deaths, and related regulatory action linked to contaminated gloves in food and healthcare have highlighted problems indicative of systemic glove industry shortcomings. The glove manufacturing process was diagramed with sources and pathways of contamination identified, indicating weak points with documented occurrences detailed. Numerous unsafe ingredients can introduce chemical contaminants, potentially posing risks to food and to glove users. Microbial hazards present significant challenges to overall glove safety as contaminants appear to be introduced via polluted water sources or flawed glove manufacturing processes, resulting in increased risks within food and healthcare environments. Frank and opportunistic pathogens along with food spoilage organisms can be introduced to foods and wearers. When the sources and pathways of glove-borne contamination were explored, it was found that physical failures play a pivotal role in the release of sweat build-up, liquefaction of chemical residues, and incubation of microbial contaminants from hands and gloves. Thus, with glove physical integrity issues, including punctures in new, unused gloves that can develop into significant rips and tears, not only can direct physical food contamination occur but also chemical and microbiological contamination can find their way into food. Enhanced regulatory requirements for Acceptable Quality Limits of food-grade gloves, and the establishment of appropriate bioburden standards would enhance safety in food applications. Based on the information provided, together with a false sense of security associated with glove use, the unconditional belief in glove chemical and microbiological purity may be unfounded.

Decontamination Effect of Hypochlorous Acid Dry Mist on Selected Bacteria, Viruses, Spores, and Fungi as Well as on Components of Electronic Systems

This publication presents the effect of hypochlorous acid dry mist as a disinfectant on selected bacteria, viruses, spores, and fungi as well as on portable Microlife OXY 300 finger pulse oximeters and electronic systems of Raspberry Pi Zero microcomputers. The impact of hypochlorous acid on microbiological agents was assessed at concentrations of 300, 500, and 2000 ppm of HClO according to PN-EN 17272 (Variant I). Studies of the impact of hypochlorous acid fog on electronic components were carried out in an aerosol chamber at concentrations of 500 ppm and 2000 ppm according to two models consisting of 30 (Variant II) and 90 fogging cycles (Variant III). Each cycle included the process of generating a dry mist of hypochlorous acid (25 mL/m3), decontamination of the test elements, as well as cleaning the chamber of the disinfectant agent. The exposure of the materials examined on hypochlorous acid dry mist in all variants resulted in a decrease in the number of viruses, bacteria, spores, and fungi tested. In addition, the research showed that in the variants of hypochlorous acid fogging cycles analyzed, no changes in performance parameters and no penetration of dry fog of hypochlorous acid into the interior of the tested medical devices and electronic systems were observed.

From intramuscular to nasal: unleashing the potential of nasal spray vaccines against coronavirus disease 2019

Coronavirus disease 2019, caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), has affected 700 million people worldwide since its outbreak in 2019. The current pandemic strains, including Omicron and its large subvariant series, exhibit strong transmission and stealth. After entering the human body, the virus first infects nasal epithelial cells and invades host cells through the angiotensin-converting enzyme 2 receptor and transmembrane serine protease 2 on the host cell surface. The nasal cavity is an important body part that protects against the virus. Immunisation of the nasal mucosa produces immunoglobulin A antibodies that effectively neutralise viruses. Saline nasal irrigation, a type of physical therapy, can reduce the viral load in the nasal cavity and prevent viral infections to some extent. As a commonly used means to fight SARS-CoV-2, the intramuscular (IM) vaccine can induce the human body to produce a systemic immune response and immunoglobulin G antibody; however, the antibody is difficult to distribute to the nasal mucosa in time and cannot achieve a good preventive effect. Intranasal (IN) vaccines compensate for the shortcomings of IM vaccines, induce mucosal immune responses, and have a better effect in preventing infection. In this review, we discuss the nasal defence barrier, the harm caused by SARS-CoV-2, the mechanism of its invasion into host cells, nasal cleaning, IM vaccines and IN vaccines, and suggest increasing the development of IN vaccines, and use of IN vaccines as a supplement to IM vaccines.

Seroevidence of SARS-CoV-2 spillback to rodents in Sarawak, Malaysian Borneo

BACKGROUND

SARS-CoV-2 is believed to have originated from a spillover event, where the virus jumped from bats to humans, leading to an epidemic that quickly escalated into a pandemic by early 2020. Despite the implementation of various public health measures, such as lockdowns and widespread vaccination efforts, the virus continues to spread. This is primarily attributed to the rapid emergence of immune escape variants and the inadequacy of protection against reinfection. Spillback events were reported early in animals with frequent contact with humans, especially companion, captive, and farmed animals. Unfortunately, surveillance of spillback events is generally lacking in Malaysia. Therefore, this study aims to address this gap by investigating the presence of SARS-CoV-2 neutralising antibodies in wild rodents in Sarawak, Malaysia.

RESULTS

We analysed 208 archived plasma from rodents collected between from 2018 to 2022 to detect neutralising antibodies against SARS-CoV-2 using a surrogate virus neutralisation test, and discovered two seropositive rodents (Sundamys muelleri and Rattus rattus), which were sampled in 2021 and 2022, respectively.

CONCLUSION

Our findings suggest that Sundamys muelleri and Rattus rattus may be susceptible to natural SARS-CoV-2 infections. However, there is currently no evidence supporting sustainable rodent-to-rodent transmission.

Healthcare Provider N95 Respirator Contamination Worn Behind Face Shields With SARS-CoV-2 During Routine Clinical Care of Patients With COVID-19

N95 respirator contamination with severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) during clinical care of patients with coronavirus disease 2019 is poorly understood. We performed a prospective observational study on healthcare provider's (HCP's) N95 respirators' and face shields' SARS-CoV-2 contamination during aerosol-generating procedures on SARS-CoV-2-positive patients housed in a COVID-19-specific unit. Medical masks worn on top of HCP's N95 respirators, and under face shields, during study aerosol-generating procedures were used as surrogates to detect contamination to avoid waste. Thirty-three HCPs were studied, and a total of 33 mask and 27 face shields were sampled. Masks were cut into 9 pieces and face shields were sampled twice, front and back, to determine locality of contamination; however, no positive samples were identified using standard polymerase chain reaction techniques with a CT value up to 40. All 9 mask piece samples were then pooled, as were face shield samples, using centrifugal concentration with polyethersulfone membranes. Once pooled and concentrated, overall, 9 (15%) samples were positive via real-time polymerase chain reaction: 5 from masks (15.2%) and 4 from face shields (14.8%).

Seasonal influenza viruses decay more rapidly at intermediate humidity in droplets containing saliva compared to respiratory mucus

Expulsions of virus-laden aerosols or droplets from the oral and nasal cavities of an infected host are an important source of onward respiratory virus transmission. However, the presence of infectious influenza virus in the oral cavity during infection has not been widely considered, and thus, little work has explored the environmental persistence of influenza virus in oral cavity expulsions. Using the ferret model, we detected infectious virus in the nasal and oral cavities, suggesting that the virus can be expelled into the environment from both anatomical sites. We also assessed the stability of two influenza A viruses (H1N1 and H3N2) in droplets of human saliva or respiratory mucus over a range of relative humidities. We observed that influenza virus infectivity decays rapidly in saliva droplets at intermediate relative humidity, while viruses in airway surface liquid droplets retain infectivity. Virus inactivation was not associated with bulk protein content, salt content, or droplet drying time. Instead, we found that saliva droplets exhibited distinct inactivation kinetics during the wet and dry phases at intermediate relative humidity, and droplet residue morphology may lead to the elevated first-order inactivation rate observed during the dry phase. Additionally, distinct differences in crystalline structure and nanobead localization were observed between saliva and airway surface liquid droplets. Together, our work demonstrates that different respiratory fluids exhibit unique virus persistence profiles and suggests that influenza viruses expelled from the oral cavity may contribute to virus transmission in low- and high-humidity environments.IMPORTANCEDetermining how long viruses persist in the environment is important for mitigating transmission risk. Expelled infectious droplets and aerosols are composed of respiratory fluids, including saliva and complex mucus mixtures, but how well influenza viruses survive in such fluids is largely unknown. Here, we find that infectious influenza virus is present in the oral cavity of infected ferrets, suggesting that saliva-containing expulsions can play a role in onward transmission. Additionally, influenza virus in droplets composed of saliva degrades more rapidly than virus within respiratory mucus. Droplet composition impacts the crystalline structure and virus localization in dried droplets. These results suggest that viruses from distinct sites in the respiratory tract could have variable persistence in the environment, which will impact viral transmission fitness.

Stability of Feline Coronavirus in aerosols and dried in organic matrices on surfaces at various environmental conditions

Enveloped respiratory viruses, including the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), can be transmitted through aerosols and contact with contaminated surfaces. The stability of these viruses outside the host significantly impacts their transmission dynamics and the spread of diseases. In this study, we investigated the tenacity of Feline Coronavirus (FCoV) in aerosols and on surfaces under varying environmental conditions. We found that airborne FCoV showed different stability depending on relative humidity (RH), with higher stability observed at low and high RH. Medium RH conditions (50-60%) were associated with increased loss of infectivity. Furthermore, FCoV remained infectious in the airborne state over 7 h. On stainless-steel surfaces, FCoV remained infectious for several months, with stability influenced by organic material and temperature. The presence of yeast extract and a temperature of 4 °C resulted in the longest maintenance of infectivity, with a 5 log10 reduction of the initial concentration after 167 days. At 20 °C, this reduction was achieved after 19 days. These findings highlight the potential risk of aerosol and contact transmission of respiratory viruses, especially in enclosed environments, over extended periods. Studying surrogate viruses like FCoV provides important insights into the behavior of zoonotic viruses like SARS-CoV-2 in the environment.

Building parameters linked with indoor transmission of SARS-CoV-2

The rapid spread of Coronavirus Disease 2019 (COVID-19), caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), has emphasized the importance of understanding and adapting to the indoor remediation of transmissible diseases to decrease the risk for future pandemic threats. While there were many precautions in place to hinder the spread of COVID-19, there has also been a substantial increase of new research on SARS-CoV-2 that can be utilized to further mitigate the transmission risk of this novel virus. This review paper aims to identify the building parameters of indoor spaces that could have considerable influence on the transmission of SARS-CoV-2. The following building parameters have been identified and analyzed, emphasizing their link with the indoor transmission of SARS-CoV-2: temperature and relative humidity, temperature differences between rooms, ventilation rate and access to natural ventilation, occupant density, surface type and finish, airflow direction and speed, air stability, indoor air pollution, central air conditioning systems, capacity of air handling system and HVAC filter efficiency, edge sealing of air filters, room layout and interior design, and compartmentalization of interior space. This paper also explains the interactions of SARS-CoV-2 with indoor environments and its persistence. Furthermore, the modifications of the key building parameters have been discussed for controlling the transmission of SARS-CoV-2 in indoor spaces. Understanding the information provided in this paper is crucial to develop effective health and safety measures that will aid in infection prevention.

Control technologies to prevent aerosol-based disease transmission in animal agriculture production settings: a review of established and emerging approaches

Transmission of infectious agents via aerosols is an ever-present concern in animal agriculture production settings, as the aerosol route to disease transmission can lead to difficult-to-control and costly diseases, such as porcine respiratory and reproductive syndrome virus and influenza A virus. It is increasingly necessary to implement control technologies to mitigate aerosol-based disease transmission. Here, we review currently utilized and prospective future aerosol control technologies to collect and potentially inactivate pathogens in aerosols, with an emphasis on technologies that can be incorporated into mechanically driven (forced air) ventilation systems to prevent aerosol-based disease spread from facility to facility. Broadly, we find that control technologies can be grouped into three categories: (1) currently implemented technologies; (2) scaled technologies used in industrial and medical settings; and (3) emerging technologies. Category (1) solely consists of fibrous filter media, which have been demonstrated to reduce the spread of PRRSV between swine production facilities. We review the mechanisms by which filters function and are rated (minimum efficiency reporting values). Category (2) consists of electrostatic precipitators (ESPs), used industrially to collect aerosol particles in higher flow rate systems, and ultraviolet C (UV-C) systems, used in medical settings to inactivate pathogens. Finally, category (3) consists of a variety of technologies, including ionization-based systems, microwaves, and those generating reactive oxygen species, often with the goal of pathogen inactivation in aerosols. As such technologies are typically first tested through varied means at the laboratory scale, we additionally review control technology testing techniques at various stages of development, from laboratory studies to field demonstration, and in doing so, suggest uniform testing and report standards are needed. Testing standards should consider the cost-benefit of implementing the technologies applicable to the livestock species of interest. Finally, we examine economic models for implementing aerosol control technologies, defining the collected infectious particles per unit energy demand.

Viricidal Efficacy of a 405-nm Environmental Decontamination System for Inactivation of Bacteriophage Phi6: Surrogate for SARS-CoV-2

The highly transmittable nature of SARS-CoV-2 has increased the necessity for novel strategies to safely decontaminate public areas. This study investigates the efficacy of a low irradiance 405-nm light environmental decontamination system for the inactivation of bacteriophage phi6 as a surrogate for SARS-CoV-2. Bacteriophage phi6 was exposed to increasing doses of low irradiance (~0.5 mW cm-2 ) 405-nm light while suspended in SM buffer and artificial human saliva at low (~103-4  PFU mL-1 ) and high (~107-8  PFU mL-1 ) seeding densities, to determine system efficacy for SARS-CoV-2 inactivation and establish the influence of biologically relevant suspension media on viral susceptibility. Complete/near-complete (≥99.4%) inactivation was demonstrated in all cases, with significantly enhanced reductions observed in biologically relevant media (P < 0.05). Doses of 43.2 and 172.8 J cm-2 were required to achieve ~3 log10 reductions at low density, and 97.2 and 259.2 J cm-2 achieved ~6 log10 reductions at high density, in saliva and SM buffer, respectively: 2.6-4 times less dose was required when suspended in saliva compared to SM buffer. Comparative exposure to higher irradiance (~50 mW cm-2 ) 405-nm light indicated that, on a per unit dose basis, 0.5 mW cm-2 treatments were capable of achieving up to 5.8 greater log10 reductions with up to 28-fold greater germicidal efficiency than that of 50 mW cm-2 treatments. These findings establish the efficacy of low irradiance 405-nm light systems for inactivation of a SARS-CoV-2 surrogate and demonstrate the significant enhancement in susceptibility when suspended in saliva, which is a major vector in COVID-19 transmission.

Current issues in hand hygiene

BACKGROUND

Multiple aspects of hand hygiene have changed in recent years.

METHODS

A PubMed search was conducted to identify recent articles about hand hygiene.

RESULTS

The COVID-19 pandemic caused temporary changes in hand hygiene compliance rates and shortages of alcohol-based hand sanitizers (ABHSs), and in marketing of some products that were ineffective or unsafe. Fortunately, ABHSs are effective against SARS-CoV-2 and other emerging pathogens including Candida auris and mpox. Proper placement, maintenance, and design of ABHS dispensers have gained additional attention. Current evidence suggests that if an adequate volume of ABHS has been applied to hands, personnel must rub their hands together for at least 15 seconds before hands feel dry (dry time), which is the primary driver of antimicrobial efficacy. Accordingly, practical methods of monitoring hand hygiene technique are needed. Direct observation of hand hygiene compliance remains a challenge in many healthcare facilities, generating increased interest in automated hand hygiene monitoring systems (AHHMSs). However, several barriers have hindered widespread adoption of AHHMSs. AHHMSs must be implemented as part of a multimodal improvement program to successfully improve hand hygiene performance rates.

CONCLUSIONS

Remaining gaps in our understanding of hand hygiene warrant continued research into factors impacting hand hygiene practices.

Persistence of Coronavirus on Surface Materials and Its Control Measures Using Nonthermal Plasma and Other Agents

Severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) has been responsible for the initiation of the global pandemic since 2020. The virus spreads through contaminated air particles, fomite, and surface-contaminated porous (i.e., paper, wood, and masks) and non-porous (i.e., plastic, stainless steel, and glass) materials. The persistence of viruses on materials depends on porosity, adsorption, evaporation, isoelectric point, and environmental conditions, such as temperature, pH, and relative humidity. Disinfection techniques are crucial for preventing viral contamination on animated and inanimate surfaces. Currently, there are few effective methodologies for preventing SARS-CoV-2 and other coronaviruses without any side effects. Before infection can occur, measures must be taken to prevent the persistence of the coronavirus on the surfaces of both porous and non-porous inanimate materials. This review focuses on coronavirus persistence in surface materials (inanimate) and control measures. Viruses are inactivated through chemical and physical methods; the chemical methods particularly include alcohol, chlorine, and peroxide, whereas temperature, pH, humidity, ultraviolet irradiation (UV), gamma radiation, X-rays, ozone, and non-thermal, plasma-generated reactive oxygen and nitrogen species (RONS) are physical methods.

Contamination of personal protective equipment and environmental surfaces in Fangcang shelter hospitals

BACKGROUND

Fangcang shelter hospitals emerged as a new public health concept after COVID-19. Data regarding contamination of Fangcang shelter environments remains scarce. This study aims to investigate the extent of SARS-CoV-2 contamination on personal protective equipment and surfaces in Fangcang hospitals.

METHODS

Between March and May 2022, during wave of omicron variant, a prospective study was conducted in 2 Fangcang hospitals in Shanghai, China. Swabs of personal protective equipment worn and environmental surfaces of contaminated areas, doffing rooms, and potentially contaminated areas were collected. SARS-CoV-2 RNA was detected by reverse transcription quantitative polymerase chain reaction. If viral RNA was detected, sampling was repeated after cleaning and disinfection.

RESULTS

A total of 602 samples were collected. 13.3% of the personal protective equipment were contaminated. Positive rate was higher in the contaminated areas (48.4%) than in the doffing rooms (11.7%) and the potentially contaminated areas (0; P<.05). Contamination was highest in patient occupied areas (67.5%). After cleaning, samples taken at previously contaminated surfaces are all negative.

CONCLUSIONS

SARS-CoV-2 RNA contamination is prevalent in Fangcang hospitals and healthcare workers are under risk of infection. Potentially contaminated areas and surfaces after cleaning and disinfection are negative, underlying the importance of infection control policy.

Stability of Aerosolized SARS-CoV-2 on Masks and Transfer to Skin

The potential for masks to act as fomites in the transmission of SARS-CoV-2 has been suggested but not demonstrated experimentally or observationally. In this study, we aerosolized a suspension of SARS-CoV-2 in saliva and used a vacuum pump to pull the aerosol through six different types of masks. After 1 h at 28 °C and 80% RH, SARS-CoV-2 infectivity was not detectable on an N95 and surgical mask, was reduced by 0.7 log10 on a nylon/spandex mask, and was unchanged on a polyester mask and two different cotton masks when recovered by elution in a buffer. SARS-CoV-2 RNA remained stable for 1 h on all masks. We pressed artificial skin against the contaminated masks and detected the transfer of viral RNA but no infectious virus to the skin. The potential for masks contaminated with SARS-CoV-2 in aerosols to act as fomites appears to be less than indicated by studies involving SARS-CoV-2 in very large droplets.

SARS-CoV-2 Survival on Surfaces. Measurements Optimisation for an Enthalpy-Based Assessment of the Risk

The present work, based on the results found in the literature, yields a consistent model of SARS-CoV-2 survival on surfaces as environmental conditions, such as temperature and relative humidity, change simultaneously. The Enthalpy method, which has recently been successfully proposed to investigate the viability of airborne viruses using a holistic approach, is found to allow us to take a reasoned reading of the data available on surfaces in the literature. This leads us to identify the domain of conditions of lowest SARS-CoV-2 viability, in a specific enthalpy range between 50 and 60 kJ/Kg_dry-air. This range appears well-superimposed with the results we previously obtained from analyses of coronaviruses' behaviour in aerosols, and may be helpful in dealing with the spread of infections. To steer future investigations, shortcomings and weaknesses emerging from the assessment of viral measurement usually carried out on surfaces are also discussed in detail. Once demonstrated that current laboratory procedures suffer from both high variability and poor standardisation, targeted implementations of standards and improvement of protocols for future investigations are then proposed.

The Environmental Stability of SARS-CoV-2 Variants Omicron BA.1 and BA.5 on the Surfaces of Widely Used Transport Packaging Materials

The increased transmissibility of SARS-CoV-2 variants of concern (VOCs) has raised questions regarding the environmental stability of these viruses. Although a prolonged survival time has been reported for SARS-CoV-2, how long new variants can persist on contaminated surfaces and how environmental factors affect the persistence time are not fully characterized. The present study provides a comprehensive assessment of the stability of Omicron variants BA.1 and BA.5, which are currently circulating strains, on the surfaces of widely used transport packaging materials. By monitoring viable virus detection over a 7-day period under different environmental conditions, it was found that the environmental stability of SARS-CoV-2 Omicron variants depended heavily on the surface type, temperature, and virus concentration. In addition, virus nucleic acid exhibited high stability on the material surface independent of whether viable virus was detected. These findings provide useful information for logistics practitioners and the general public to appropriately deal with transport items under different conditions to minimize the risk of epidemic transmission. IMPORTANCE This study shows the environmental stability of SARS-CoV-2 Variants Omicron BA.1 and BA.5 on surfaces of widely used transport packaging materials. The findings demonstrate that the environmental stability of the SARS-CoV-2 Omicron variants varies based on material type. The viability of SARS-CoV-2 on material surfaces depends heavily on temperature and viral titer. Low temperatures and high viral titers promote virus survival. Moreover, in contrast to virus viability, virus nucleic acid exhibits high stability on the surfaces of widely used materials, making the detection of virus nucleic acid unsuitable for evaluating the risk of epidemic transmission.

A critical assessment of SARS-CoV-2 in aqueous environment: Existence, detection, survival, wastewater-based surveillance, inactivation methods, and effective management of COVID-19

In early January 2020, the causal agent of unspecified pneumonia cases detected in China and elsewhere was identified as a novel severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and was the major cause of the COVID-19 outbreak. Later, the World Health Organization (WHO) proclaimed the COVID-19 pandemic a worldwide public health emergency on January 30, 2020. Since then, many studies have been published on this topic. In the present study, bibliometric analysis has been performed to analyze the research hotspots of the coronavirus. Coronavirus transmission, detection methods, potential risks of infection, and effective management practices have been discussed in the present review. Identification and quantification of SARS-CoV-2 viral loads in various water matrices have been reviewed. It was observed that the viral shedding through urine and feces of COVID-19-infected patients might be a primary mode of SARS-CoV-2 transmission in water and wastewater. In this context, the present review highlights wastewater-based epidemiology (WBE)/sewage surveillance, which can be utilized as an effective tool for tracking the transmission of COVID-19. This review also emphasizes the role of different disinfection techniques, such as chlorination, ultraviolet irradiation, and ozonation, for the inactivation of coronavirus. In addition, the application of computational modeling methods has been discussed for the effective management of COVID-19.

Assessment and strategy development for SARS-CoV-2 screening in wildlife: A review

Coronaviruses (members of the Coronaviridae family) are prominent in veterinary medicine, with several known infectious agents commonly reported. In contrast, human medicine has disregarded coronaviruses for an extended period. Within the past two decades, coronaviruses have caused three major outbreaks. One such outbreak was the coronavirus disease 2019 (COVID-19) caused by the coronavirus severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2). Over the 3-year COVID-19 outbreak, several instances of zooanthroponosis have been documented, which pose risks for virus modifications and possible re-emergence of the virus into the human population, causing a new epidemic and possible threats for vaccination or treatment failure. Therefore, widespread screening of animals is an essential technique for mitigating future risks and repercussions. However, mass detection of SARS-CoV-2 in wild animals might be challenging. In silico prediction modeling, experimental studies conducted on various animal species, and natural infection episodes recorded in various species might provide information on the potential threats to wildlife. They may be useful for diagnostic and mass screening purposes. In this review, the possible methods of wildlife screening, based on experimental data and environmental elements that might play a crucial role in its effective implementation, are reviewed.

Surface Inactivation of a SARS-CoV-2 Surrogate with Hypochlorous Acid is Impacted by Surface Type, Contact Time, Inoculum Matrix, and Concentration

Indirect contact with contaminated surfaces is a potential transmission route for COVID-19. Therefore, it is necessary to investigate convenient and inexpensive surface sanitization methods, such as HOCl, against severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). The SARS-CoV-2 surrogate, Phi6 (~ 7 log PFU/mL), was prepared in artificial saliva and tripartite matrices, spot inoculated on coupons of either stainless steel or vinyl, and allowed to dry. The coupons were sprayed with either 500 ppm or 1000 ppm HOCl, and remained on the surface for 0 s (control), 5 s, 30 s, or 60 s. Samples were enumerated via the double agar overlay assay. Statistical analysis was completed in R using a generalized linear model with Quasipoisson error approximations. Time, concentration, surface type, and inoculum matrix were all significant contributors to log reduction at P = 0.05. Significant three-way interactions were observed for 1000 ppm, vinyl, and 60 s (P = 0.03) and 1000 ppm, tripartite, and 60 s (P = 0.0121). A significant two-way interaction between vinyl and 60 s was also observed (P = 0.0168). Overall, increased HOCl concentration and exposure time led to increased Phi6 reduction. Notably, the highest estimated mean log reduction was 3.31 (95% CI 3.14, 3.49) for stainless steel at 60 s and 1000 ppm HOCl in artificial saliva, indicating that this method of sanitization may not adequately reduce enveloped viruses to below infective thresholds.

Stability of SARS-CoV-2 and persistence of viral nucleic acids on common foods and widely used packaging material surfaces

SARS-CoV-2 is still spreading globally. Studies have reported the stability of SARS-CoV-2 in aerosols and on surfaces under different conditions. However, studies on the stability of SARS-CoV-2 and viral nucleic acids on common food and packaging material surfaces are insufficient. The study evaluated the stability of SARS-CoV-2 using TCID₅₀ assays and the persistence of SARS-CoV-2 nucleic acids using droplet digital polymerase chain reaction on various food and packaging material surfaces. Viral nucleic acids were stable on food and material surfaces under different conditions. The viability of SARS-CoV-2 varied among different surfaces. SARS-CoV-2 was inactivated on most food and packaging material surfaces within 1 day at room temperature but was more stable at lower temperatures. Viruses survived for at least 1 week on pork and plastic at 4°C, while no viable viruses were detected on hairtail, orange, or carton after 3 days. There were viable viruses and a slight titer decrease after 8 weeks on pork and plastic, but titers decreased rapidly on hairtail and carton at -20°C. These results highlight the need for targeted preventive and disinfection measures based on different types of foods, packaging materials, and environmental conditions, particularly in the cold-chain food trade, to combat the ongoing pandemic.

Porous Cellulose Thin Films as Sustainable and Effective Antimicrobial Surface Coatings

In the present work, we developed an effective antimicrobial surface film based on sustainable microfibrillated cellulose. The resulting porous cellulose thin film is barely noticeable to human eyes due to its submicrometer thickness, of which the surface coverage, porosity, and microstructure can be modulated by the formulations and the coating process. Using goniometers and a quartz crystal microbalance, we observed a threefold reduction in water contact angles and accelerated water evaporation kinetics on the cellulose film (more than 50% faster than that on a flat glass surface). The porous cellulose film exhibits a rapid inactivation effect against SARS-CoV-2 in 5 min, following deposition of virus-loaded droplets, and an exceptional ability to reduce contact transfer of liquid, e.g., respiratory droplets, to surfaces such as an artificial skin by 90% less than that from a planar glass substrate. It also shows excellent antimicrobial performance in inhibiting the growth of both Gram-negative and Gram-positive bacteria (Escherichia coli and Staphylococcus epidermidis) due to the intrinsic porosity and hydrophilicity. Additionally, the cellulose film shows nearly 100% resistance to scraping in dry conditions due to its strong affinity to the supporting substrate but with good removability once wetted with water, suggesting its practical suitability for daily use. Importantly, the coating can be formed on solid substrates readily by spraying, which requires solely a simple formulation of a plant-based cellulose material with no chemical additives, rendering it a scalable, affordable, and green solution as antimicrobial surface coating. Implementing such cellulose films could thus play a significant role in controlling future pan- and epidemics, particularly during the initial phase when suitable medical intervention needs to be developed and deployed.

Viricidal Activity of Thermoplastic Polyurethane Materials with Silver Nanoparticles

The use of diverse Ag-based nanoparticulated forms has shown promising results in controlling viral propagation. In this study, a commercial nanomaterial consisting of ceramic-coated silver nanoparticles (AgNPs) was incorporated into thermoplastic polyurethane (TPU) plates using an industrial protocol, and the surface composition, ion-release dynamics and viricidal properties were studied. The surface characterization by FESEM-EDX revealed that the molar composition of the ceramic material was 5.5 P:3.3 Mg:Al and facilitated the identification of the embedded AgNPs (54.4 ± 24.9 nm). As determined by ICPMS, the release rates from the AgNP-TPU into aqueous solvents were 4 ppm/h for Ag and Al, and 28.4 ppm/h for Mg ions. Regarding the biological assays, the AgNP-TPU material did not induce significant cytotoxicity in the cell lines employed. Its viricidal activity was characterized, based on ISO 21702:2019, using the Spring viraemia of carp virus (SVCV), and then tested against the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). The results demonstrated that AgNP-TPU materials exhibited significant (75%) and direct antiviral activity against SVCV virions in a time- and temperature-dependent manner. Similar inhibition levels were found against SARS-CoV-2. These findings show the potential of AgNP-TPU-based materials as a supporting strategy to control viral spread.

Stability of SARS-CoV-2 on inanimate surfaces: A review

The stability of SARS-CoV-2 for varying periods on a wide range of inanimate surfaces has raised concerns about surface transmission; however, there is still no evidence to confirm this route. In the present review, three variables affecting virus stability, namely temperature, relative humidity (RH), and initial virus titer, were considered from different experimental studies. The stability of SARS-CoV-2 on the surfaces of six different contact materials, namely plastic, metal, glass, protective equipment, paper, and fabric, and the factors affecting half-life period was systematically reviewed. The results showed that the half-life of SARS-CoV-2 on different contact materials was generally 2-10 h, up to 5 d, and as short as 30 min at 22 °C, whereas the half-life of SARS-CoV-2 on non-porous surfaces was generally 5-9 h d, up to 3 d, and as short as 4 min at 22 ℃. The half-life on porous surfaces was generally 1-5 h, up to 2 d, and as short as 13 min at 22 °C. Therefore, the half-life period of SARS-CoV-2 on non-porous surfaces is longer than that on porous surfaces, and thehalf-life of the virus decreases with increasing temperature, whereas RH produces a stable negative inhibitory effect only in a specific humidity range. Various disinfection precautions can be implemented in daily life depending on the stability of SARS-CoV-2 on different surfaces to interrupt virus transmission, prevent COVID-19 infections, and avoid over-disinfection. Owing to the more stringent control of conditions in laboratory studies and the lack of evidence of transmission through surfaces in the real world, it is difficult to provide strong evidence for the efficiency of transmission of the contaminant from the surface to the human body. Therefore, we suggest that future research should focus on exploring the systematic study of the entire transmission process of the virus, which will provide a theoretical basis for optimizing global outbreak prevention and control measures.

The presence of COVID-19 face masks in the largest hypersaline lagoon of South America is predicted by urbanization level

The inadequate disposal of face masks has caused a widespread presence of COVID-19 litter in the environment. We monitored 10 beach arcs along approximately 15 km of the largest hypersaline lagoon of South America looking for face masks during the lockdown (2021) and in the "new normal" (2022) period. Our working hypothesis is that the probability of finding face masks increases with higher urbanization levels, which was estimated by the Human Modification Metric. Approximately 3 × 10-3 face masks m-2 were found on nine of 10 beaches (90 %) during the lockdown. However, this reduced to 1 × 10-4 face masks m-2 found in eight beaches (80 %) after the lockdown. The probability of finding a face mask was significantly higher as urbanization increased (z = 2.799; p = 0.005). This situation imposes the need for a better waste management and environmental education actions, targeting the reduction of direct littering on coastal ecosystem.

Surface Contamination of Reusable Respirators and Face Shields During Care of Critically Ill COVID-19 Patients

BACKGROUND

With the emergence of SARS-CoV-2, healthcare workers (HCW) have relied on reusable personal protective equipment (PPE), including respirators and face shields (FSs). The effectiveness of decontamination procedures outside experimental settings is unclear. We examined the prevalence of surface contamination on reusable PPE used by HCWs at a hospital incorporating daily centralized decontamination and post-use wiping by sampling for common pathogens.

METHOD

Samples were collected from HCWs' CleanSpace Halo respirator face masks (FMs) and FSs at the start of shift, immediately after use, and after cleaning with disinfecting wipes. Samples were analyzed for pathogens using the Applied Biosystems™ TaqPath™ COVID-19 Combo Kit and ThermoFisher TaqMan Array Card. Patient charts were reviewed for clinical correlation.

FINDINGS

Of the 89 samples, 51 from FMs and 38 from FSs, none tested positive for SARS-CoV-2, despite 58 being obtained from PPE used in the care of patients with COVID-19, many with recent aerosol-generating procedures. Four samples tested positive (4.5%) for Staphylococcus aureus, two each from FMs and FSs. FMs that tested positive were not worn concurrently with FSs that tested positive. The FM and FS samples testing positive were worn in the care of patients without diagnosed S. aureus infection. No FMs tested positive following wipe-based disinfection, but both positive FS samples were found after disinfection wiping.

CONCLUSION/APPLICATION TO PRACTICE

Contamination of reusable PPE appears uncommon, especially with SARS-CoV-2, when regular decontamination programs are in place. The rare presence of S. aureus highlights the importance of doffing procedures and hand hygiene by HCW to prevent surface contamination.

Antimicrobial and Antiviral Properties of Triclosan-Containing Polymer Composite: Aging Effects of pH, UV, and Sunlight Exposure

The present study deals with the synthesis and characterization of a polymer composite based on an unsaturated ester loaded with 5 wt.% triclosan, produced by co-mixing on an automated hardware system. The polymer composite's non-porous structure and chemical composition make it an ideal material for surface disinfection and antimicrobial protection. According to the findings, the polymer composite effectively inhibited (100%) the growth of Staphylococcus aureus 6538-P under exposure to physicochemical factors, including pH, UV, and sunlight, over a 2-month period. In addition, the polymer composite demonstrated potent antiviral activity against human influenza virus strain A and the avian coronavirus infectious bronchitis virus (IBV), with infectious activities of 99.99% and 90%, respectively. Thus, the resulting triclosan-loaded polymer composite is revealed to have a high potential as a surface-coating non-porous material with antimicrobial properties.

Mechanisms controlling the transport and evaporation of human exhaled respiratory droplets containing the severe acute respiratory syndrome coronavirus: a review

Transmission of the coronavirus disease 2019 is still ongoing despite mass vaccination, lockdowns, and other drastic measures to control the pandemic. This is due partly to our lack of understanding on the multiphase flow mechanics that control droplet transport and viral transmission dynamics. Various models of droplet evaporation have been reported, yet there is still limited knowledge about the influence of physicochemical parameters on the transport of respiratory droplets carrying the severe acute respiratory syndrome coronavirus 2. Here we review the effects of initial droplet size, environmental conditions, virus mutation, and non-volatile components on droplet evaporation and dispersion, and on virus stability. We present experimental and computational methods to analyze droplet transport, and factors controlling transport and evaporation. Methods include thermal manikins, flow techniques, aerosol-generating techniques, nucleic acid-based assays, antibody-based assays, polymerase chain reaction, loop-mediated isothermal amplification, field-effect transistor-based assay, and discrete and gas-phase modeling. Controlling factors include environmental conditions, turbulence, ventilation, ambient temperature, relative humidity, droplet size distribution, non-volatile components, evaporation and mutation. Current results show that medium-sized droplets, e.g., 50 µm, are sensitive to relative humidity. Medium-sized droplets experience delayed evaporation at high relative humidity, and increase airborne lifetime and travel distance. By contrast, at low relative humidity, medium-sized droplets quickly shrink to droplet nuclei and follow the cough jet. Virus inactivation within a few hours generally occurs at temperatures above 40 °C, and the presence of viral particles in aerosols impedes droplet evaporation.

Transmission of SARS-CoV-2 in the workplace: Key findings from a rapid review of the literature

At the beginning of the COVID-19 pandemic, the primary route of transmission of the SARS-CoV-2 virus was not well understood. Research gathered from other respiratory infectious diseases, including other coronaviruses, was the basis for the initial perceptions for transmission of SARS-CoV-2. To better understand transmission of SARS-CoV-2, a rapid literature review was conducted from literature generated March 19, 2020, through September 23, 2021. 18,616 unique results were identified from literature databases and screened. Of these, 279 key articles were reviewed and abstracted covering critical topics such as environmental/workplace monitoring, sampling and analytical method evaluation, and the ability of the virus to remain intact and infectious during sampling. This paper describes the results of the rapid literature review, which evaluated pathways that contribute to transmission as well as the strengths and limitations of current sampling approaches. This review also evaluates how different factors, including environmental conditions and surface characteristics, could impact the transmission potential of SARS-CoV-2. A continual rapid review in the midst of a pandemic proved particularly useful for quickly understanding the transmission parameters of the virus and enabled us to comprehensively assess literature, respond to workplace questions, and evaluate our understanding as the science evolved. Air and surface sampling with the accompanying analytical methods were not generally effective in recovering SARS-CoV-2 viable virus or RNA in many likely contaminated environments. In light of these findings, the development of validated sampling and analysis methods is critical for determining worker exposure to SARS-CoV-2 and to assess the impact of mitigation efforts.

Stability and inactivation of SARS-CoV-2 on food contact surfaces

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has infected more than 269 million people and killed more than 5.3 million people worldwide. Although fomite transmission of SARS-CoV-2 has been continuously reported, few studies have been conducted on food contact surfaces. Therefore, this study aimed to investigate the viability of coronaviruses on food contact surfaces and to remove SARS-CoV-2 contaminated on food contact surfaces with disinfectants. At 20 °C, SARS-CoV-2 was inactivated within 48 h on all food contact surfaces. At 4 °C, it was inactivated at 48 h on kraft paper and 96 h on parchment paper, but it was viable up to 5 days in low-density polyethylene (LDPE). At −20 °C, SARS-CoV-2 did not decrease by even 1 log on all food contact surfaces until 5 days. Treatment with 70% ethanol or 1000 ppm sodium hypochlorite for 5 min was sufficient to completely remove SARS-CoV-2 from 6 food contact surfaces. Similarly, UV-C irradiation at 60 mJ/cm² eliminated SARS-CoV-2 contaminated on food contact surfaces. Also, the wiping test showed that even wiping an area contaminated with SARS-CoV-2 with a cloth moistened with 70% ethanol or 1000 ppm sodium hypochlorite, it took 5 min to inactivate the virus. Our findings suggested that SARS-CoV-2 contaminated on food contact surfaces in local retail may be viable enough to be transported home. However, if the type and method of use of the disinfectant suggested in this study are followed, it is possible to sufficiently control the fomite transmission of SARS-CoV-2 through food contact surfaces at home.

Various advanced wastewater treatment methods to remove microplastics and prevent transmission of SARS-CoV-2 to airborne microplastics

Microplastics (MPs) and SARS-CoV-2 interact due to their widespread presence in our environment and affect the virus' behaviour indoors and outdoors. Therefore, it is necessary to study the interaction between MPs and SARS-CoV-2. The environmental damage caused by MPs is increasing globally. Emerging pollutants may adversely affect organisms, especially sewage, posing a threat to human health, animal health, and the ecological system. A significant concern with MPs in the air is that they are a vital component of MPs in the other environmental compartments, such as water and soil, which may affect human health through ingesting or inhaling. This work introduces the fundamental knowledge of various methods in advanced water treatment, including membrane bioreactors, advanced oxidation processes, adsorption, etc., are highly effective in removing MPs; they can still serve as an entrance route due to their constantly being discharged into aquatic environments. Following that, an analysis of each process for MPs' removal and mitigation or prevention of SARS-CoV-2 contamination is discussed. Next, an airborne microplastic has been reported in urban areas, raising health concerns since aerosols are considered a possible route of SARS-CoV-2 disease transmission and bind to airborne MP surfaces. The MPs can be removed from wastewater through conventional treatment processes with physical processes such as screening, grit chambers, and pre-sedimentation.

Minding the matrix: The importance of inoculum suspensions on finger transfer efficiency of virus

AIMS

The aim of this study was to determine how the transfer efficiency of MS-2 coliphage from the toilet seat to hands and fingertip to lip differs according to the suspension of the inoculum.

METHODS AND RESULTS

Hands were sampled after lifting a toilet seat which was inoculated with MS-2 on the underneath side. MS-2 was suspended in a spectrum of proteinaceous and non-proteinaceous solutions. Transfer efficiencies were greatest with the ASTM tripartite soil load (3.02% ± 4.03) and lowest with phosphate-buffered saline (PBS) (1.10% ± 0.81) for hand-to-toilet seat contacts. Finger-to-lip transfer rates were significantly different (p < 0.05) depending on suspension matrix, with PBS yielding the highest transfer (52.53% ± 4.48%) and tryptose soy broth (TSB) the lowest (23.15% ± 24.27%). Quantitative microbial risk assessment was used to estimate the probability of infection from adenovirus and norovirus from finger contact with a toilet seat.

CONCLUSIONS

The greatest transfer as well as the largest variation of transfer were measured for finger-to-lip contacts as opposed to toilet seat-to-finger contacts. These factors influence the estimation of the probability of infection from micro-activity, that is, toilet seat adjustment.

SIGNIFICANCE AND IMPACT

Viruses may be transferred from various human excreta with differing transfer efficiencies, depending on the protein content.

Indirect Virus Transmission via Fomites Can Counteract Lock-Down Effectiveness

The spread of severe acute respiratory syndrome-coronavirus-2 (SARS-CoV-2) has raised major health policy questions. Direct transmission via respiratory droplets seems to be the dominant route of its transmission. However, indirect transmission via shared contact of contaminated objects may also occur. The contribution of each transmission route to epidemic spread might change during lock-down scenarios. Here, we simulate viral spread of an abstract epidemic considering both routes of transmission by use of a stochastic, agent-based SEIR model. We show that efficient contact tracing (CT) at a high level of incidence can stabilize daily cases independently of the transmission route long before effects of herd immunity become relevant. CT efficacy depends on the fraction of cases that do not show symptoms. Combining CT with lock-down scenarios that reduce agent mobility lowers the incidence for exclusive direct transmission scenarios and can even eradicate the epidemic. However, even for small fractions of indirect transmission, such lockdowns can impede CT efficacy and increase case numbers. These counterproductive effects can be reduced by applying measures that favor distancing over reduced mobility. In summary, we show that the efficacy of lock-downs depends on the transmission route. Our results point to the particular importance of hygiene measures during mobility lock-downs.

Database of SARS-CoV-2 and coronaviruses kinetics relevant for assessing persistence in food processing plants

SARS-CoV-2 (Severe acute respiratory syndrome coronavirus 2), a virus causing severe acute respiratory disease in humans, emerged in late 2019. This respiratory virus can spread via aerosols, fomites, contaminated hands or surfaces as for other coronaviruses. Studying their persistence under different environmental conditions represents a key step for better understanding the virus transmission. This work aimed to present a reproducible procedure for collecting data of stability and inactivation kinetics from the scientific literature. The aim was to identify data useful for characterizing the persistence of viruses in the food production plants. As a result, a large dataset related to persistence on matrices or in liquid media under different environmental conditions is presented. This procedure, combining bibliographic survey, data digitalization techniques and predictive microbiological modelling, identified 65 research articles providing 455 coronaviruses kinetics. A ranking step as well as a technical validation with a Gage Repeatability & Reproducibility process were performed to check the quality of the kinetics. All data were deposited in public repositories for future uses by other researchers.

Evaluation of the relative potential for contact and doffing transmission of SARS-CoV-2 by a range of personal protective equipment materials

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2)-the causative agent of coronavirus disease 2019 (COVID-19)-has caused a global public health emergency. Personal protective equipment (PPE) is the primary defence against viral exposure in healthcare and community settings. However, the surfaces of PPE materials may trap virus for contact transmission or through laden aerosols generated during removal of PPE, through cleaning or during movement. In this study, the relative efficacy of current PPE materials in terms of virion adsorption to materials and their antiviral potency, has been evaluated on a wide range of PPE for the first time, including four polymer glove types, two types of scrubs, apron material, a mask, visor and a selection of other commercial polymers and products. Although differences in virion adsorption to the test materials were observed, none of the existing polymer-based PPE resulted in more than tenfold reduction in the SARS-CoV-2 titre within either 10 min or 30 min contact period. The wettability and surface chemistry of the test materials were analysed to investigate any correlations with their surface physicochemical properties. While no correlation was found between wettability and viral retention under air flow challenge, one secondary ion of m/z 101.03 (+) and three secondary ions of m/z 31.98 (-), 196.93 (-) and 394.33 (+) in ToF-SIMS data of the test materials showed positive and negative correlations with the viral retention, respectively, which was identified by PLS regression model, suggesting that the surface chemistry plays a role in determining the extent of virion adsorption. Our findings outline the material aspects that influence the efficacy of current PPE against SARS-CoV-2 transmission and give suggestions on the development of novel simple polymer-based PPE for better infection protection.

Persistence of SARS-CoV-2 on surfaces and relevance to the food industry

Determining the prevalence and persistence of viruses outside the human host aids our ability to characterize exposure risk across multiple transmission pathways. Since 2020, the Coronavirus Disease 2019 pandemic has resulted in a surge of research regarding severe acute respiratory syndrome-coronavirus-type 2 (SARS-CoV-2) and its potential to spread via direct and indirect contact transmission routes. Here, the authors discuss the current state of the science concerning SARS-CoV-2 transmission via contaminated surfaces and its persistence on environmental surfaces. This review aims to provide the reader with an overview of the currently published SARS-CoV-2 persistence studies, factors impacting persistence, guidelines for performing persistence studies, limitation of current data, and future directions for assessing SARS-CoV-2 persistence on fomites.

A hand-targeted auxiliary personal protective equipment for intervention of fomite transmission of viruses

In COVID-19, fomite transmission has been shown to be a major route for the spreading of the SARS-CoV-2 virus due to its ability to remain on surfaces for extended durations. Although glove wearing can mitigate the risk of viral transmission especially on high touch points, it is not prevalent due to concerns on diversion of frontline medical resources, cross-contamination, social stigma, as well as discomfort and skin reactions derived from prolonged wearing. In this study, we developed FlexiPalm, a hand-targeted auxiliary personal protective equipment (PPE) against fomite transmission of viruses. FlexiPalm is a unique palmar-side hand protector designed to be skin-conforming and transparent, fabricated from medical-grade polyurethane transparent film material as a base substrate. It serves primarily as a barrier to microbial contamination like conventional gloves, but with augmented comfort and inconspicuousness to encourage a higher public adoption rate. Compared to conventional glove materials, FlexiPalm demonstrated enhanced mechanical durability and breathability, comparable hydrophobicity, and displayed a minimal adsorption of SARS-CoV-2 spike protein and virus-like particles (VLP). Importantly, FlexiPalm was found to bind significantly less viral protein and VLP than artificial human skin, confirming its ability to reduce viral contamination. A pilot study involving participants completing activities of daily living showed a high level of comfort and task completion, illustrating the usability and functionality of FlexiPalm. Moreover, we have demonstrated that surface modification of FlexiPalm with microtextures enables further reduction in viral adsorption, thereby enhancing its functionality. An effective implementation of FlexiPalm will bolster PPE sustainability and lead to a paradigm shift in the global management of COVID-19 and other infectious diseases in general.

Permanent, Antimicrobial Coating to Rapidly Kill and Prevent Transmission of Bacteria, Fungi, Influenza, and SARS-CoV-2

Microbial adhesion and contamination on shared surfaces can lead to life-threatening infections with serious impacts on public health, economy, and clinical practices. The traditional use of chemical disinfectants for sanitization of surfaces, however, comes with its share of health risks, such as hazardous effects on the eyes, skin, and respiratory tract, carcinogenicity, as well as environmental toxicity. To address this, we have developed a nonleaching quaternary small molecule (QSM)-based sprayable coating which can be fabricated on a wide range of surfaces such as nylon, polyethylene, surgical mask, paper, acrylate, and rubber in a one-step, photocuring technique. This contact-active coating killed pathogenic bacteria and fungi including drug-resistant strains of Staphylococcus aureus and Candida albicans within 15-30 min of contact. QSM coatings withstood multiple washes, highlighting their durability. Interestingly, the coated surfaces exhibited rapid killing of pathogens, leading to the prevention of their transmission upon contact. The coating showed membrane disruption of bacterial cells in fluorescence and electron microscopic investigations. Along with bacteria and fungi, QSM-coated surfaces also showed the complete killing of high loads of influenza (H1N1) and SARS-CoV-2 viruses within 30 min of exposure. To our knowledge, this is the first report of a coating for multipurpose materials applied in high-touch public places, hospital equipment, and clinical consumables, rapidly killing drug-resistant bacteria, fungi, influenza virus, and SARS-CoV-2.

Detection rate of SARS-CoV-2 RNA in relation to isolation time and environmental surface type

Severe acute respiratory syndrome coronavirus (SARS-CoV-2) causes environmental contamination via respiratory droplets and persists on contaminants and environmental surfaces for anywhere from a few hours to 6 days. Therefore, it is particularly important to understand the transmission and containment of SARS-CoV-2 on the surface of objects within isolated environments. In this study, 356 environmental surface samples were collected and 79 tested positive, with the highest contamination rate (56.96%) in the wood category (bedside tables, wood floors, and walls). This study revealed differences in the detection rates of environmental surfaces in hospitalized and discharged rooms of patients with confirmed COVID-19 in 2 isolated settings (A: p = 0.001; B: p = 0.505) and suggested that environmental contamination may be an important route of virus transmission, providing a reference to guide the enhancement of ventilation, the use of hotel isolation model, the advocacy of cotton masks, and the effective suppression of virus transmission.

Transfer of Phi6 Bacteriophage Between Human Skin and Surfaces Common to Consumer-Facing Environments

AIMS

This study aimed to determine the extent of Phi6 (Φ6) transfer between skin and surfaces relevant to consumer-facing environments based on inoculum matrix, surface type, and contact time.

METHODS AND RESULTS

Φ6 transfer rates were determined from skin-to-fomite and fomite-to-skin influenced by inoculum matrix (artificial saliva and tripartite), surface type (aluminum, plastic, stainless steel, touchscreen, vinyl, and wood) and contact time (5 and 10 s). Significant differences in estimated means were observed based on surface type (both transfer directions), inoculum matrix (skin-to-fomite), and contact time (both transfer directions). During a sequential transfer experiment from fomite-to-skin, the maximum number of consecutive transfer events observed was 3.33 ± 1.19, 2.33 ± 1.20, and 1.67 ± 1.21 for plastic, touchscreen, and vinyl, respectively.

CONCLUSIONS

Contact time significantly impacted Φ6 transfer rates, which may be attributed to skin absorption dynamics. Surface type should be considered for assessing Φ6 transfer rates.

SIGNIFICANCE AND IMPACT OF THE STUDY

Although the persistence of Φ6 on fomites has been characterized, limited data is available regarding the transfer of Φ6 amongst skin and fomites. Determining Φ6 transfer rates for surfaces in consumer-facing environments based on these factors is needed to better inform future virus transmission mitigation strategies.

Stability and transmissibility of SARS-CoV-2 in the environment

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), the virus causing the ongoing global coronavirus disease 2019 (COVID-19) pandemic, is believed to be transmitted primarily through respiratory droplets and aerosols. However, reports are increasing regarding the contamination of environmental surfaces, shared objects, and cold-chain foods with SARS-CoV-2 RNA and the possibility of environmental fomite transmission of the virus raises much concern and debate. This study summarizes the current knowledge regarding potential mechanisms of environmental transmission of SARS-CoV-2, including the prevalence of surface contamination in various settings, the viability and stability of the virus on surfaces or fomites, as well as environmental factors affecting virus viability and survival such as temperature and relative humidity. Instances of fomite transmission, including cold-chain food transmission, and the importance of fomite transmission in epidemics, are discussed. The knowledge gaps regarding fomite transmission of SARS-CoV-2 are also briefly analyzed.

Viable SARS-CoV-2 Delta variant detected in aerosols in a residential setting with a self-isolating college student with COVID-19

The B.1.617.2 (Delta) variant of SARS-CoV-2 emerged in India in October of 2020 and spread widely to over 145 countries, comprising over 99% of genome sequence-confirmed virus in COVID-19 cases of the United States (US) by September 2021. The rise in COVID-19 cases due to the Delta variant coincided with a return to in-person school attendance, straining COVID-19 mitigation plans implemented by educational institutions. Some plans required sick students to self-isolate off-campus, resulting in an unintended consequence: exposure of co-inhabitants of dwellings used by the sick person during isolation. We assessed air and surface samples collected from the bedroom of a self-isolating university student with mild COVID-19 for the presence of SARS-CoV-2. That virus' RNA was detected by real-time reverse-transcription quantitative polymerase chain reaction (rRT-qPCR) in air samples from both an isolation bedroom and a distal, non-isolation room of the same dwelling. SARS-CoV-2 was detected and viable virus was isolated in cell cultures from aerosol samples as well as from the surface of a mobile phone. Genomic sequencing revealed that the virus was a Delta variant SARS-CoV-2 strain. Taken together, the results of this work confirm the presence of viable SARS-CoV-2 within a residential living space of a person with COVID-19 and show potential for transportation of virus-laden aerosols beyond a designated isolation suite to other areas of a single-family home.

Efficacy of biocidal agents and disinfectants against the monkeypox virus and other orthopoxviruses

The number of human monkeypox virus infections is increasing in many countries. The typical mode of transmission is by direct contact. As orthopoxviruses may stay infectious on inanimate surfaces under laboratory conditions for up to 42 days, disinfection may be relevant in the surroundings of confirmed cases. The aim of this review was to evaluate published data on the antiviral efficacy of biocidal agents and disinfectants against the monkeypox virus and other orthopoxviruses. A Medline search was carried out on 5th June 2022. The terms 'monkeypox virus', 'poxvirus' and 'orthopoxvirus' were used in combination with 'disinfection'. Publications were included and results were extracted where they provided original data on any orthopoxvirus regarding its inactivation by disinfectants. Vaccinia viruses could be inactivated by at least 4 log10 in suspension tests and on artificially contaminated surfaces by 70% ethanol (≤1 min), 0.2% peracetic acid (≤10 min) and 1-10% of a probiotic cleaner (1 h), mostly shown with different types of organic load. Hydrogen peroxide (14.4%) and iodine (0.04-1%) were effective in suspension tests, sodium hypochlorite (0.25-2.5%; 1 min), 2% glutaraldehyde (10 min) and 0.55% orthophthalaldehyde (5 min) were effective on artificially contaminated surfaces. Copper (99.9%) was equally effective against vaccinia virus and monkeypox virus in 3 min. Disinfectants with efficacy data obtained in suspension tests and under practical conditions with different types of organic load resembling compounds of the blood, the respiratory tract and skin lesions are preferred for the inactivation of the monkeypox virus.

Elucidating the role of environmental management of forests, air quality, solid waste and wastewater on the dissemination of SARS-CoV-2

The increasing frequency of zoonotic diseases is amongst several catastrophic repercussions of inadequate environmental management. Emergence, prevalence, and lethality of zoonotic diseases is intrinsically linked to environmental management which are currently at a destructive level globally. The effects of these links are complicated and interdependent, creating an urgent need of elucidating the role of environmental mismanagement to improve our resilience to future pandemics. This review focused on the pertinent role of forests, outdoor air, indoor air, solid waste and wastewater management in COVID-19 dissemination to analyze the opportunities prevailing to control infectious diseases considering relevant data from previous disease outbreaks. Global forest management is currently detrimental and hotspots of forest fragmentation have demonstrated to result in zoonotic disease emergences. Deforestation is reported to increase susceptibility to COVID-19 due to wildfire induced pollution and loss of forest ecosystem services. Detection of SARS-CoV-2 like viruses in multiple animal species also point to the impacts of biodiversity loss and forest fragmentation in relation to COVID-19. Available literature on air quality and COVID-19 have provided insights into the potential of air pollutants acting as plausible virus carrier and aggravating immune responses and expression of ACE2 receptors. SARS-CoV-2 is detected in outdoor air, indoor air, solid waste, wastewater and shown to prevail on solid surfaces and aerosols for prolonged hours. Furthermore, lack of protection measures and safe disposal options in waste management are evoking concerns especially in underdeveloped countries due to high infectivity of SARS-CoV-2. Inadequate legal framework and non-adherence to environmental regulations were observed to aggravate the postulated risks and vulnerability to future waves of pandemics. Our understanding underlines the urgent need to reinforce the fragile status of global environmental management systems through the development of strict legislative frameworks and enforcement by providing institutional, financial and technical supports.

Research on the Factors Damaging Hydrogen Peroxide Low-Temperature Plasma Sterile Packaging Bags and the Control of Link Quality

Objective. After discussing the factors damaging hydrogen peroxide low-temperature plasma sterile packaging bags (hereinafter referred to as Tyvek packaging bags), the damage rate of Tyvek packaging bags is lowered through the control of link quality, so as to guarantee the quality of sterile packaging bags and the safety of patients. Methods. Design questionnaire and registration form by investigating 8606 instrument packaging bags sterilized by hydrogen peroxide low-temperature plasma from January 2019 to December 2019, the controllable factors damaging Tyvek packaging bags are analyzed from four aspects: instrument packaging, sterilization, transfer, and storage. By taking targeted interventions on 8155 instrument packaging bags sterilized from January 2020 to December 2020, the intervention effects of the key links and the damage rate are evaluated. Results. The main factors damaging Tyvek packaging bags mainly include improper transfer, storage, and management of instrument packing bags; improper use of instrument boxes; improper loading and uploading operations of sterilization; and the wrong size of packaging bags. For these factors, related intervention measures shall be adopted to control the link quality so as to lower the damage rate from 3.54% in the control group to 0.20% in the experimental group. The differences in damage rate are of statistical significance ( $P<0.01$ ). Conclusion. Tyvek packaging bags are influenced by controllable factors. Through reasonable link control and standard operations, the sterile packaging bags can be kept sterile from the end of sterilization to the usage by patients, which guarantees the safety of patients and is worthy of reference.

Antimicrobial Nonwoven Fabrics Incorporated with Levulinic Acid and Sodium Dodecyl Sulfate for Use in the Food Industry

Safe and cost-effective antimicrobial fabrics (e.g., face masks and air filters) are conducive to preventing the spread and transmission of respiratory microorganisms in food processing plants and retail establishments. The objective of this study was to coat fabrics with two commonly used compounds in the food industry: levulinic acid (LVA) and sodium dodecyl sulfate (SDS) and determine the antimicrobial efficacy of the coated fabrics against bacterial solutions, aerosols, and influenza A virus subtype H1N1. In addition, air permeability and shelf-life of the LVA/SDS coated fabrics were also examined. Nonwoven fabrics were dip-coated with three concentrations (w/v, 0.5% LVA + 0.1% SDS, 1% LVA + 0.5% SDS, and 2% LVA + 1% SDS) of LVA and SDS and challenged with bacterial solutions (Staphylococcus aureus and Escherichia coli, ca. 7.0 log CFU/coupon) for a contact time of 3, 5, and 10 min. The coated fabrics were also challenged with S. aureus aerosol and H1N1 virus following standard operations of ASTM F2101-19 and ISO 18184:2019, respectively. The 1% LVA + 0.5% SDS coated fabrics showed potent antibacterial efficacy against both bacterial solutions (>6.0-log reduction to under the detection limit of 1.0 log CFU/coupon for S. aureus; ca. 1.0-log reduction for E. coli) and aerosols (>3.6-log reduction to under the detection limit), with greater inactivation occurring at higher concentrations and longer exposure time. Moreover, the coated fabrics inactivated >99% of the H1N1 virus. The shelf-life of the coated fabrics was stable within 12 months and the air permeability was not adversely affected with the coating concentrations less than 1% LVA + 0.5% SDS. Results reveal these low-cost and safe materials have the potential to be used to coat fabrics in the food industry to combat the spread and transmission of pathogens.

Ozone treatment effectively eliminates SARS-CoV-2 from infected face masks

The current COVID-19 pandemic is causing profound health, economic, and social problems worldwide. The global shortage of medical and personal protective equipment (PPE) in specialized centers during the outbreak demonstrated the need for efficient methods to disinfect and recycle them in times of emergency. We have previously described that high ozone concentrations destroyed viral RNA in an inactivated SARS-CoV-2 strain within a few minutes. However, the efficient ozone dosages for active SARS-CoV-2 are still unknown. The present study aimed to evaluate the systematic effects of ozone exposure on face masks from hospitalized patients infected with SARS-CoV-2. Face masks from COVID-19 patients were collected and treated with a clinical ozone generator at high ozone concentrations in small volumes for short periods. The study focused on SARS-CoV-2 gene detection (assessed by real-time quantitative polymerase chain reaction (RT-qPCR)) and on the virus inactivation by in vitro studies. We assessed the effects of different high ozone concentrations and exposure times on decontamination efficiency. We showed that high ozone concentrations (10,000, 2,000, and 4,000 ppm) and short exposure times (10, 10, and 2 minutes, respectively), inactivated both the original strain and the B.1.1.7 strain of SARS-CoV-2 from 24 contaminated face masks from COVID-19 patients. The validation results showed that the best condition for SARS-CoV-2 inactivation was a treatment of 4,000 ppm of ozone for 2 minutes. Further studies are in progress to advance the potential applications of these findings.

Routine Decontamination of Surfaces Relevant to Working Dogs: Neutralization of Superficial Coronavirus Contamination

Given the increased deployment of working dogs to settings with pathogenic biological agents, a safe, effective, and logistically feasible surface decontamination protocol is essential to protect both the animals and their human handlers. Our group previously found that superficial contamination on surfaces relevant to the working dog community, including leashes and toys, could be significantly reduced using a standardized wiping protocol with various cleansing products. To expand upon this work, we analyzed the ability of this protocol to decontaminate surface-deposited bovine coronavirus, which was used as a BSL2 surrogate for SARS-CoV-2. Unsurprisingly, the physical characteristics of a given surface, including porosity and texture, had a significant effect on the ability to recover viable virus remaining on the surface post treatment. After correcting for these differences, however, wiping with 70% isopropyl alcohol (IPA) and 0.5% chlorhexidine performed best, reducing viral titers by >3 log on plastic bumper toys and nylon collars, and by >2 log on rubber toys and tennis balls. Leather leashes and Velcro proved more difficult to decontaminate, but both still showed significant loss of viral contamination following wiping with IPA or chlorhexidine. This work (i) validates the utility of a simple protocol for the neutralization of viruses on several surfaces, (ii) identifies materials that are more difficult to decontaminate, which should, thus, be considered for removal from field use, and (iii) highlights the need for further development of protocols testing porous or textured surfaces.