Characterization of chitin and chitosan derived from Hermetia illucens, a further step in a circular economy process

Turning black soldier fly rearing by-products into valuable materials: Valorisation through chitin and chitin nanocrystals production

The industry of insect-based proteins as feed and food products has been encountering a huge development since the last decade, and industrial-scale factories are now arising worldwide. Among all the species studied, Black Soldier Fly is one of the most promising and farmed. This rearing activity generates several by-products in the form of chitin-rich biomass that can be valorised to keep a virtuous production cycle embedded in the scope of the bioeconomy. Herein, we report the isolation of chitin and, for the first time, chitin nanocrystals (ChNCs) from all the BSF rearing by-products, i.e., moults (larval exuviae, puparium) and dead adults. Extraction yields, were dependent on the type of by-products and ranged from 5.8 % to 20.0 %, and the chemical structure of the extracts exhibited typical features of α-chitin, confirmed by FTIR, NMR, XRD and TGA analysis. Both STEM in SEM and AFM analysis confirmed the isolation of chitin nanocrystals presenting a rod-like morphology. The average nanocrystal height estimated by AFM ranged from 13 to 27 nm depending on the by-product sample. The following results highlighted the potential of BSF rearing by-products, promoting an approach to valorise those industrial waste and paving the way towards insect-based biorefinery.

Tenebrio Molitor breeding rejects as a high source of pure chitin and chitosan: Role of the processes, influence of the life cycle stages and comparison with Hermetia illucens

This work valorizes rejects from Tenebrio Molitor TM breeding through the production of chitin and chitosan. Two processes are proposed for extracting chitin from larval exuviae and adult. The first process P1 provides chitin with high contents compared to literature data but the characterization shows the presence of impurities in the exuviae chitin responsible for the shifts in the values of the physicochemical characteristics towards those presented by γ chitin. These impurities are removed by delipidation and pure α chitin is obtained. The effective delipidation of this chitin would be linked to its fibrous surface structure. The analysis of the results of P1 led us to develop a second extraction process P2 which provides pure chitin with improved yields using delipidation followed by deproteinization. The N-deacetylation of chitin according to Kurita or Broussignac process makes possible the preparation of pure, highly deacetylated chitosan samples (2 % < DA < 12 %) with high yields and controlled molar masses (Mv). A kinetic study of molecular degradation during deacetylation is carried out. A comparison with Hermetia illucens allows to extend the use of insects as a potential source of chitin and chitosan and confirms the role of the source and the processes in the determination of their characteristics.

Enzymatic production of diverse N-acetyl chitooligosaccharides employing a novel bifunctional chitinase and its engineered variants

Bioproduction of diverse N-acetyl chitooligosaccharides from chitin is of great value. In the study, a novel GH family 18 bifunctional chitinase gene (PsChi82) from Paenibacillus shirakamiensis was identified, expressed and biochemically characterized. PsChi82 was most active at pH 5.0, and 55 °C, and displayed remarkable pH stability with the broad pH range of 3.0-12.0. It showed high chitosanase activity of 10.6 U mg-1 and diverse hydrolysis products of GlcNAc, (GlcNAc)2, GlcN-GlcNAc and (GlcN)2-GlcNAc, which may facilitate comprehensively understanding of structure-function relationships of N-acetyl COSs. Three engineered variants were then expressed and characterized. Among them, PsChi82-CBM26 possessed specific activity of 25.1 U mg-1 against colloidal chitin, which was 2.1 folds higher than that of PsChi82. The diverse N-acetyl COSs were subsequently produced by PsChi82-CBM26 with a sugar content of 23.2 g L-1. These excellent properties may make PsChi82-CBM26 potentially useful for N-acetyl COSs production in the food and chemical industries.

Trends in sustainable chitosan-based hydrogel technology for circular biomedical engineering: A review

Eco-friendly materials have emerged in biomedical engineering, driving major advances in chitosan-based hydrogels. These hydrogels offer a promising green alternative to conventional polymers due to their non-toxicity, biodegradability, biocompatibility, environmental friendliness, affordability, and easy accessibility. Known for their remarkable properties such as drug encapsulation, delivery capabilities, biosensing, functional scaffolding, and antimicrobial behavior, chitosan hydrogels are at the forefront of biomedical research. This paper explores the fabrication and modification methods of chitosan hydrogels for diverse applications, highlighting their role in advancing climate-neutral healthcare technologies. It reviews significant scientific advancements and trends chitosan hydrogels focusing on cancer diagnosis, drug delivery, and wound care. Additionally, it addresses current challenges and green synthesis practices that support a circular economy, enhancing biomedical sustainability. By providing an in-depth analysis of the latest evidence on climate-neutral management, this review aims to facilitate informed decision-making and foster the development of sustainable strategies leveraging chitosan hydrogel technology. The insights from this comprehensive examination are pivotal for steering future research and applications in sustainable biomedical solutions.

Crucial roles of specialized chitinases in elytral and hindwing cuticles construction in Leptinotarsa decemlineata

BACKGROUND

The Colorado potato beetle (CPB), Leptinotarsa decemlineata, is a major potato (Solanum tuberosum) pest, infesting over 16 million km2 and causing substantial economic losses. The insect cuticle forms an apical extracellular matrix (ECM) envelope covering exposed organs to direct morphogenesis and confer structural protection. While select chitinase (Cht) genes have proven essential for larval development, their potential activities directing ECM remodeling underlying adult wing maturation remain undefined.

RESULTS

We investigated the expression patterns and performed an oral RNA interference (RNAi) screen targeting 19 LdChts in late-instar L. decemlineata larvae. Subsequently, we assessed their effects on adult eclosion and wing characteristics. Knockdown of LdCht5, LdCht7, LdCht10, LdIDGF2, and LdIDGF4, as well as others from Group IV (LdCht15, LdCht12, LdCht17, and LdCht13) and Groups VII-X (LdCht2, LdCht11, LdCht1, and LdCht3), resulting in shrunken, misshapen elytra with reduced areal density, as well as transverse wrinkling and impaired wing-tip folding in hindwings. Scanning electron micrographs revealed eroded elytral ridges alongside thinned, ruptured hindwing veins, indicative of mechanical fragility post-LdCht suppression. Spectroscopic analysis uncovered biomolecular alterations underlying the elytral anomalies, including decreases in peaks representing chitin, proteins, and lipids. This loss of essential ECM components provides evidence for the fragility, wrinkling, and shrinkage observed in the RNAi groups.

CONCLUSION

Our findings elucidate the crucial role of chitinases in the turnover of chitinous cuticles on beetle wings, offering insights into RNAi-based control strategies against this invasive pest. © 2024 Society of Chemical Industry.

Extraction, characterization and evaluation of antimicrobial activity of chitosan from adult Zophobas morio (Fabricius, 1776) (Coleoptera: Tenebrionidae)

The increasing demand for chitosan has led to the exploration of alternative sources, including insects. In this study, chitosan was extracted from Zophobas morio beetles with 19.17 % yield. FTIR and Raman Spectroscopy showed similar peaks in Z. morio chitosan (ZC) and commercial chitosan (CC). ZC showed low crystallinity (40.96 %) and high thermal residual mass (42.7 %) than CC. SEM imaging of ZC displayed pores ranging from 10 μm to 0.3 μm. EDX mapping revealed the homogenous presence of C, N and O elements. ZC exhibited low molecular weight (435.95 kDa) and low intrinsic viscosity (317.95 cm3/g) than CC (680.20 kDa and 480.87 cm3/g, respectively). Degree of deacetylation of ZC and CC was 96.24 % and 78.26 %, respectively. ZC showed antimicrobial activity against Escherichia coli (ATCC 25922), Klebsiella pneumoniae (ATCC 13883), Proteus mirabilis (ATCC 29906), Staphylococcus aureus (ATCC 25923), Enterococcus faecalis (ATCC 29212) and Candida albicans (ATCC 90028) with zones of inhibition ranging from 5 mm to 11 mm. The minimum bactericidal concentration of ZC against K. pneumoniae and P. mirabilis was lower than CC. This study suggests the applicability of insect chitosan as an antimicrobial agent in the food and pharmaceutical industries.

In vitro antifungal activity and in vivo edible coating efficacy of insect-derived chitosan against Botrytis cinerea in strawberry

Strawberry is a perishable fruit, susceptible to development of rot by a range of fungi, in particular Botrytis cinerea. Chitosan represents an alternative to agrochemicals for improving shelf-life and fighting fungal pathogens. A chitosan-based coating derived from pupal exuviae of Hermetia illucens has been recently formulated for improving shelf-life of strawberry stored at 4 °C and mixed condition (4 °C and room temperature). The effects of a decolored (PEDEC) and not decolored (PEND) chitosan from the black soldier fly were evaluated and compared with commercial chitosans from crustaceans (CCs), in vitro and in vivo. An inhibition/reduction of fungal growth and a disturbance of normal fungal morphology were observed, being MIC of 0.5 mg mL-1 and 1 mg mL-1 and growth inhibition of 70 % and 4% for PEND and PEDEC, respectively. Both edible coatings distributed via aerograph showed equal or better potential application than CCs in controlling B. cinerea in strawberry post-harvest treated. Different effects for chitosans depended on their different molecular weight and deacetylation degree distributions, and the presence or absence of melanin pigments in their structure. PEND could act directly against the fungus, with effects predominantly associated with fungitoxic properties; PEDEC might principally provide viable alternatives, such as the elicitation of biochemical defense responses in fruits, for example through total phenols, in particular the flavonoids.

Synthesis and unambiguous NMR characterization of linear and branched N-alkyl chitosan derivatives

Chitosan, sourced from abundant chitin-rich waste streams, emerges as a promising candidate in the realm of future functional materials and chemicals. While showing numerous advantageous properties, chitosan sometimes falls short of competing with today's non-renewable alternatives. Chemical derivatization, particularly through N-alkylation, proves promising in enhancing hydrophobic functionalities. This study synthesizes fifteen chitosan derivatives (degree of substitution = 2-10 %) using an improved reductive amination method. Next, selective depolymerization through acid hydrolysis reduced the chain rigidity imposed by the polymer backbone. This facilitated unambiguous structural characterization of the synthesized compounds using a combination of common NMR techniques. Two potential side reactions are identified for the first time, emphasizing the need for detailed structural information to unlock the true potential of these derivatives in future applications. HYPOTHESIS: The increase in chain mobility induced by the selective depolymerization of aliphatic N-alkyl chitosan derivatives allows for an unambiguous NMR characterization.

Chitosan: An overview of biological activities, derivatives, properties, and current advancements in biomedical applications

The second and most often utilized natural polymer is chitosan (CS), a naturally existing amino polysaccharide that is produced by deacetylating chitin. Numerous applications have been the subject of in-depth investigation due to its non-hazardous, biologically compatible, and biodegradable qualities. Chitosan's characteristics, such as mucoadhesion, improved permeability, controlled release of drugs, in situ gelation process, and antibacterial activity, depend on its amino (-NH2) and hydroxyl groups (-OH). This study examines the latest findings in chitosan research, including its characteristics, derivatives, preliminary research, toxic effects, pharmaceutical kinetics and chitosan nanoparticles (CS-NPs) based for non-parenteral delivery of drugs. Chitosan and its derivatives have a wide range of physical and chemical properties that make them highly promising for use in the medicinal and pharmaceutical industries. The characteristics and biological activities of chitosan and its derivative-based nanomaterials for the delivery of drugs, therapeutic gene transfer, delivery of vaccine, engineering tissues, evaluations, and other applications in medicine are highlighted in detail in the current review. Together with the techniques for binding medications to nanoparticles, the application of the nanoparticles was also dictated by their physical properties that were classified and specified. The most recent research investigations on delivery of drugs chitosan nanoparticle-based medication delivery methods applied topically, through the skin, and through the eyes were considered.

Insect-derived chitosan, a biopolymer for the increased shelf life of white and red grapes

Post-harvest water loss and microbial infections are the root cause of the rapid deterioration of fresh fruit after the picking process, with both environmental and economic implications. Therefore, it is crucial to find solutions that can increase the shelf life of fresh fruits. For this purpose, edible coatings, naturally derived and non-synthetic, are acknowledged as a safe strategy. Among polymeric coatings, chitosan is one of the most effective. In this work, this biopolymer, produced from chitin extracted from Hermetia illucens, an alternative and more sustainable source than crustaceans (the commercial one), was exploited to extend the shelf life of white and red grapes. Chitosan from H. illucens pupal exuviae, at 0.5 % and 1 % concentrations, was applied on both grapes, which were then stored at room temperature or 4 °C. The study of chemical-physical parameters such as weight loss, Total Soluble Solids and pH, demonstrated the effectiveness of the biopolymer, even better than crustacean chitosan. Moreover, the analysis of nutraceutical properties has demonstrated that this natural edible coating improves the quality of grapes, with beneficial effects for human health. The obtained results, therefore, confirmed the viability of using insect-chitosan as an alternative to crustaceans for the preservation of fresh food.

Reciprocal sharing of extracellular proteases and extracellular matrix molecules facilitates Bacillus subtilis biofilm formation

Extracellular proteases are a class of public good that support growth of Bacillus subtilis when nutrients are in a polymeric form. Bacillus subtilis biofilm matrix molecules are another class of public good that are needed for biofilm formation and are prone to exploitation. In this study, we investigated the role of extracellular proteases in B.  subtilis biofilm formation and explored interactions between different public good producer strains across various conditions. We confirmed that extracellular proteases support biofilm formation even when glutamic acid provides a freely available nitrogen source. Removal of AprE from the NCIB 3610 secretome adversely affects colony biofilm architecture, while sole induction of WprA activity into an otherwise extracellular protease-free strain is sufficient to promote wrinkle development within the colony biofilm. We found that changing the nutrient source used to support growth affected B. subtilis biofilm structure, hydrophobicity and architecture. We propose that the different phenotypes observed may be due to increased protease dependency for growth when a polymorphic protein presents the sole nitrogen source. We however cannot exclude that the phenotypic changes are due to alternative matrix molecules being made. Co-culture of biofilm matrix and extracellular protease mutants can rescue biofilm structure, yet reliance on extracellular proteases for growth influences population coexistence dynamics. Our findings highlight the intricate interplay between these two classes of public goods, providing insights into microbial social dynamics during biofilm formation across different ecological niches.

Dehydrated and live black soldier fly larvae as environmental enrichment in indigenous slow-growing chickens: performance, gut health, and chitinolytic enzyme activity

The demand for sustainable and ethically farmed animal products is on the rise as consumers become more environmentally and animal welfare conscious. The need to diminish the consumption of soybean meal is urgent, and companies are looking for ways to respond to this necessity by looking for alternatives to soybean meal. This study assessed the impact of introducing whole dehydrated and live black soldier fly larvae (BSFL) into the diet of an indigenous chicken breed as environmental enrichment. A total of 144 39-day-old male Bianca di Saluzzo chickens were distributed among 18 pens and assigned to three different experimental groups. The control group received a diet where soybean meal was entirely replaced by alternative ingredients. The two experimental groups were given the same diet supplemented with 5% of the expected daily feed intake of whole dehydrated BSFL or whole live BSFL. Throughout the trial period (from the bird age of 39-174 days of age), live weight was recorded every 21 days, and the average daily gain, daily feed intake, and feed conversion ratio were calculated. The time required for the birds to consume the larvae was recorded three times a week. At age 147 and 174 days, 12 birds per treatment were selected based on mean live weight and slaughtered. Measurements included hot and chilled carcass weights, organ weights (spleen, liver, heart, stomach), breast and thigh muscle weights, and the corresponding yields were calculated. Acid protease activity was measured in proventriculus extract, and chitinase and chitosanase activity was calculated based on the release of reducing sugars from chitin or chitosan. The results showed little improvement in final live weights and daily feed intakes of the animals fed the insect larvae compared with control birds. Larva supplementation had no negative impact on the overall well-being of the animals assessed by blood analysis and histopathological assessment of the intestinal tract, spleen, and liver. No differences were found between the dehydrated vs live insect larvae consumption times, with all larvae being eaten up very rapidly (< 3 min). The birds fed BSFL showed an increase in chitinase activity. These findings support the potential use of whole BSFL as a form of environmental enrichment, particularly in their dehydrated form, being more convenient to use and store, which would also encourage the uptake of this practice by farmers.

Multifunctional protocatechuic acid-polyacrylic acid hydrogel adhesives for wound dressings

Multifunctional hydrogel adhesives are highly desirable in wound healing applications, yet their preparation often requires complex material system design to achieve. Herein, a straightforward one-pot two-step polymerization method is developed to prepare adhesive hydrogels for wound dressing based on protocatechuic acid (PCA), polyacrylic acid (PAA), and polyamidoamine-epichlorohydrin (PAE), where PCA provides the catechol groups for strong adhesion, PAA serves as the primary polymer matrix, and PAE acts as a bridge connecting PCA and PAA. This design results in a PAA-PAE-PCA hydrogel having a remarkable instant 90-degree peeling interfacial toughness of 431 J m-2 on porcine skin, which is further amplified to 615 J m-2 after 30 minutes. The hydrogel also possesses the desired features for wound dressing, such as self-healing, antioxidant, anti-UV and antibacterial properties, good cytocompatibility, strong adhesion in use and weak adhesion on removal, as well as reversible and wet adhesion. Finally, in vivo data reveal that the PAA-PAE-PCA hydrogels can significantly accelerate wound healing, as evidenced by a noticeable reduction in the wound area and a diminished inflammatory response. Collectively, these results endorse the obtained multifunctional hydrogel as a promising candidate for wound healing and related fields.

Moving towards fully circular insect production: A focus on insect-derived biowastes

Over the last decade, commercialization of insects for food and feed has been exponentially increasing. Insect protein is emerging as a sustainable livestock feed and human food alternative due to its low land and carbon footprint. The principles of insect industry are deeply embedded in the core values of sustainability and circular economy. Black soldier fly (BSF) is the crown jewel of insect industry and is one of the most commercially farmed insects. However, this steadfast growth is accompanied by generation of insect based biowaste such as dead flies and pupae exuviae. This will be a major waste fraction from this industry. This study discusses the valorization potential of this waste into chitin (which finds application in cosmetics, bioplastics, and pesticides, among other industries), biogas, fertilizer, and biochar. There is need to conduct more explorative research on value proposition of insect based biowaste to ensure that this industry can comply fully with circular economy and sustainability principles.

Polymer-Based Wound Dressings Loaded with Essential Oil for the Treatment of Wounds: A Review

Wound healing can result in complex problems, and discovering an effective method to improve the healing process is essential. Polymeric biomaterials have structures similar to those identified in the extracellular matrix of the tissue to be regenerated and also avoid chronic inflammation, and immunological reactions. To obtain smart and effective dressings, bioactive agents, such as essential oils, are also used to promote a wide range of biological properties, which can accelerate the healing process. Therefore, we intend to explore advances in the potential for applying hybrid materials in wound healing. For this, fifty scientific articles dated from 2010 to 2023 were investigated using the Web of Science, Scopus, Science Direct, and PubMed databases. The principles of the healing process, use of polymers, type and properties of essential oils and processing techniques, and characteristics of dressings were identified. Thus, the plants Syzygium romanticum or Eugenia caryophyllata, Origanum vulgare, and Cinnamomum zeylanicum present prospects for application in clinical trials due to their proven effects on wound healing and reducing the incidence of inflammatory cells in the site of injury. The antimicrobial effect of essential oils is mainly due to polyphenols and terpenes such as eugenol, cinnamaldehyde, carvacrol, and thymol.

Chitosan-Integrated Curcumin-Graphene Oxide/Copper Oxide Hybrid Nanocomposites for Antibacterial and Cytotoxicity Applications

This study deals with the facile synthesis of a single-pot chemical technique for chitosan-curcumin (CUR)-based hybrid nanocomposites with nanostructured graphene oxide (GO) and copper oxide (CuO) as the antibacterial and cytotoxic drugs. The physicochemical properties of synthesized hybrid nanocomposites such as CS-GO, CS-CuO, CS-CUR-GO, and CS-CUR-GO/CuO were confirmed with various advanced tools. Moreover, the in vitro drug release profile of the CS-CUR-GO/CuO nanocomposite exhibited sustained and controlled release during different time intervals. Also, the antibacterial activity of the CS-CUR-GO/CuO hybrid nanocomposite presented the maximum bactericidal effect against Staphylococcus aureus and Escherichia coli pathogens. The hybrid nanocomposites revealed improved cytotoxicity behaviour against cultured mouse fibroblast cells (L929) via cell adhesion, DNA damage, and proliferation. Thus, the chitosan-based hybrid nanocomposites offer rich surface area, biocompatibility, high oxidative stress, and bacterial cell disruption functionalities as a potential candidate for antibacterial and cytotoxicity applications.

Properties of Chitin and Its Regenerated Hydrogels from the Insect Zophobas morio Fed Citrus Biomass or Polystyrene

The potential of insects as a recycling tool has recently attracted attention. In this study, chitin was extracted with 1 M HCl for 24 h at 20 °C, followed by 1 M NaOH for 5 h at 90 °C, and bleached with 2.5% v/v NaOCl for 2 h at 20 °C from Zophobas morio (ZM) insects fed citrus waste biomass (OP) or polystyrene foam (PS). The highest survival rate was found in the OP group. The properties of the resulting chitin material are reported, as well as the preparation of hydrogels using a DMAc/LiCl solvent. All chitins obtained were α-chitin. The degrees of deacetylation, crystallinity, molecular weight, and solubility in DMAc/LiCl were similar between the PS and biomass feeds, and they showed similar viscosities in the DMAc/LiCl solution. All hydrogels obtained had similar properties and viscoelastic behavior, indicating that the resultant chitins and their hydrogels from ZM were similar between those fed with citrus biomass and those fed with PS.

A comprehensive characterization of Hermetia illucens derived chitosan produced through homogeneous deacetylation

The increasing demand for chitin and chitosan is driving research to explore alternative sources to crustaceans. Insects, particularly bioconverters as Hermetia illucens, are promising substitutes as they process food industry waste into valuable molecules, including chitin. Chitosan can be produced by chitin deacetylation: hot deacetylation to obtain a heterogeneous chitosan, the commonly produced, and cold deacetylation to obtain a homogeneous chitosan, not widely available. The two different treatments lead to a different arrangement of the amine and acetyl groups in the chitosan structure, affecting its molecular weight, deacetylation degree, and biological activity. This is the first report on the production and chemical-physical and biological characterization of homogenous chitosan derived from H. illucens larvae, pupal exuviae, and adults. This work, in addition to the report on heterogeneous chitosan by our research group, completes the overview of H. illucens chitosan. The yield values obtained for homogeneous chitosan from pupal exuviae (3 and 7 %) are in the range of insect (2-8 %) and crustaceans (4-15 %) chitosan. The evaluation of the antioxidant activity and antimicrobial properties against Gram-negative (Escherichia coli) and Gram-positive (Micrococcus flavus) bacteria confirmed the great versatility of H. illucens chitosan for biomedical and industrial applications and its suitability as an alternative source to crustaceans.

Update on Chitin and Chitosan from Insects: Sources, Production, Characterization, and Biomedical Applications

Insects, renowned for their abundant and renewable biomass, stand at the forefront of biomimicry-inspired research and offer promising alternatives for chitin and chitosan production considering mounting environmental concerns and the inherent limitations of conventional sources. This comprehensive review provides a meticulous exploration of the current state of insect-derived chitin and chitosan, focusing on their sources, production methods, characterization, physical and chemical properties, and emerging biomedical applications. Abundant insect sources of chitin and chitosan, from the Lepidoptera, Coleoptera, Orthoptera, Hymenoptera, Diptera, Hemiptera, Dictyoptera, Odonata, and Ephemeroptera orders, were comprehensively summarized. A variety of characterization techniques, including spectroscopy, chromatography, and microscopy, were used to reveal their physical and chemical properties like molecular weight, degree of deacetylation, and crystallinity, laying a solid foundation for their wide application, especially for the biomimetic design process. The examination of insect-derived chitin and chitosan extends into a wide realm of biomedical applications, highlighting their unique advantages in wound healing, tissue engineering, drug delivery, and antimicrobial therapies. Their intrinsic biocompatibility and antimicrobial properties position them as promising candidates for innovative solutions in diverse medical interventions.

Synthesis and characterization of chitosan for medical applications: A review

Chitosan has gained considerable recognition within the field of medical applications due to its exceptional biocompatibility and diverse range of properties. Nevertheless, prior reviews have primarily focused on its applications, offering limited insights into its source materials. Hence, there arises a compelling need for a comprehensive review that encompasses the entire chitin and chitosan life cycle: from the source of chitin and chitosan, extraction methods, and specific medical applications, to the various techniques employed in evaluating chitosan's properties. This all-encompassing review delves into the critical aspects of chitin and chitosan extraction, with a strong emphasis on the utilization of natural raw materials. It elucidates the various sources of these raw materials, highlighting their abundance and accessibility. Furthermore, a meticulous examination of extraction methods reveals the prevalent use of hydrochloric acid (HCl) in the demineralization process, alongside citric, formic, and phosphoric acids. Based on current review information, these acids constitute a substantial 69.2% of utilization, surpassing other mentioned acids. Of notable importance, the review underscores the essential parameters for medical-grade chitosan. It advocates for a degree of deacetylation (DDA) falling within the range of 85%-95%, minimal protein content <1%, ash content <2%, and moisture content <10%. In conclusion, these crucial factors contribute to the understanding of Chitosan's production for medical applications, paving the way for advancements in biomedical research and development.

CdIn2Se4@chitosan heterojunction nanocomposite with ultrahigh photocatalytic activity under sunlight driven photodegradation of organic pollutants

This research focused on synthesizing a CdIn2Se4@Ch nanocomposite by doping CdIn2Se4 into chitosan using a photolysis assisted ultrasonic process. The aim was to enhance the photodegradation efficiency of ofloxacin and 2,4-dichlorophenoxyacetic acid under sunlight. The synthesized CdIn2Se4@Ch nanocomposite was investigated via different techniques, including XRD, XPS, FTIR, TEM, DSC, TGA, UV-Vis and PL. The study also investigated the influence of various reaction parameters, including the effects of inorganic and organic ions. The synthesized nanocomposite demonstrated exceptional efficiency, achieving 86 % and 95 % removal rates, with corresponding rate constants of 0.025 and 0.047 min-1. This performance surpasses that of CdIn2Se4 by approximately 1.35 and 2.25 times, respectively. The values of COD were decreased to 78 and 86 % for ofloxacin and 2,4-dichlorophenoxyacetic, while the TOC values decreased to 71 and 84 %, respectively, from their premier values. The improvement in performance is associated with the introduction of CdIn2Se4 into chitosan, resulting in the self-integration of Cd into the catalyst. This creates a localized accumulation point for electrons, enhancing the efficiency of charge separation and further reducing the surface charge of chitosan. Experimental evidence suggests that superoxide and hydroxyl radicals play a significant role in the photodegradation of pollutants. Additionally, the nanocomposite exhibits excellent stability and can be reused up to five times, indicating remarkable stability and reusability of the developed photocatalyst.

Valorization of Hermetia illucens breeding rejects by chitins and chitosans production. Influence of processes and life cycle on their physicochemical characteristics

Breeding of the black soldier fly is carried out to produce proteins. It is accompanied by releases during the life cycle of this insect. This work is a study of the valorization of these rejects through the production of chitins and chitosans with controlled characteristics. An extraction process is developed with an order of treatments and reaction conditions that provide chitins with high contents. These contents increase as the stages of the life cycle progress and drop for the adult. However, the exuviae chitins present organic impurities which will be eliminated at the N-deacetylation reaction for pupe and after a purification treatment for chitosan from larval stages. All these chitins have an α structure although certain physicochemical characteristics of the larval exuviae chitins are close to those presented by γ chitin. The observed shifts are linked to the effect of impurities rather than to a difference in structure. N-deacetylation of chitins makes possible the valorization of all rejects by the production of pure chitosans with high yields which retain a porous structure for the exuviae and fibrous for the adult which allow complementary applications. These chitosans are highly to completely deacetylated and their molar masses can vary depending on the process and life stage.

Sourcing chitin from exoskeleton of Tenebrio molitor fed with polystyrene or plastic kitchen wrap

In this work we have characterized and compared chitin sourced from exoskeleton of Tenebrio molitor larvae fed with polystyrene or plastic kitchen wrap combined with bran in the ratio 1: 1 with chitin sourced from larvae exoskeleton fed only with bran. Analysis of the frass by ATR-FTIR showed very similar spectra and confirmed degradation of the plastic feed components, while ATR-FTIR analysis of the exoskeleton verified the absence of any plastic residue. Deproteinization followed by demineralization produced 6.78-5.29 % chitin, showing that plastic (polystyrene or plastic kitchen wrap) in the larvae diet resulted in heavier insect exoskeleton, but yielded slightly less chitin, with the lowest value obtained for plastic kitchen wrap in the insect diet. The deacetylation degree of 98.17-98.61 % was determined from measured ATR-FTIR spectra. XRD analysis confirmed the presence of α-chitin with a crystallinity index of 66.5-62 % and crystallite size 4-5 nm. Thermogravimetric analysis showed similar degradation curves for all chitin samples, with two degradation steps. These results show that chitin sourced from exoskeleton of T. molitor larvae fed with plastic (polystyrene or plastic kitchen wrap) and contributing to significant biodegradation of major polluting materials can be a feasible and alternative source of chitin, further promoting a bio-circular economy.

Investigating the simultaneous effect of chitosan and arbuscular mycorrhizal fungi on growth, phenolic compounds, PAL enzyme activity and lipid peroxidation in Salvia nemorosa L

Considering the importance of Salvia nemorosa L. in the pharmaceutical and food industries, and also beneficial approaches of arbuscular mycorrhizal fungi (AMF) symbiosis and the use of bioelicitors such as chitosan to improve secondary metabolites, the aim of this study was to evaluate the performance of chitosan on the symbiosis of AMF and the effect of both on the biochemical and phytochemical performance of this plant and finally introduced the best treatment. Two factors were considered for the factorial experiment: AMF with four levels (non-inoculated plants, Funneliformis mosseae, Rhizophagus intraradices and the combination of both), and chitosan with six levels (0, 50, 100, 200, 400 mg L-1 and 1% acetic acid). Four months after treatments, the aerial part and root length, the levels of lipid peroxidation, H2O2, phenylalanine ammonia lyase (PAL) activity, total phenol and flavonoid contents and the main secondary metabolites (rosmarinic acid and quercetin) in the leaves and roots were determined. The flowering stage was observed in R. intraradices treatments and the highest percentage of colonization (78.87%) was observed in the treatment of F. mosseae × 400 mg L-1 chitosan. Furthermore, simultaneous application of chitosan and AMF were more effective than their separate application to induce phenolic compounds accumulation, PAL activity and reduce oxidative compounds. The cluster and principal component analysis based on the measured variables indicated that the treatments could be classified into three clusters. It seems that different treatments in different tissues have different effects. However, in an overview, it can be concluded that 400 mg L-1 chitosan and F. mosseae × R. intraradices showed better results in single and simultaneous applications. The results of this research can be considered in the optimization of this medicinal plant under normal conditions and experiments related to abiotic stresses in the future.

Larval Frass of Hermetia illucens as Organic Fertilizer: Composition and Beneficial Effects on Different Crops

Hermetia illucens has received a lot of attention as its larval stage can grow on organic substrates, even those that are decomposing. Black soldier fly breeding provides a variety of valuable products, including frass, a mixture of larval excrements, larval exuviae, and leftover feedstock, that can be used as a fertilizer in agriculture. Organic fertilizers, such as frass, bringing beneficial bacteria and organic materials into the soil, improves its health and fertility. This comprehensive review delves into a comparative analysis of frass derived from larvae fed on different substrates. The composition of micro- and macro-nutrients, pH levels, organic matter content, electrical conductivity, moisture levels, and the proportion of dry matter are under consideration. The effect of different feeding substrates on the presence of potentially beneficial bacteria for plant growth within the frass is also reported. A critical feature examined in this review is the post-application beneficial impacts of frass on crops, highlighting the agricultural benefits and drawbacks of introducing Hermetia illucens frass into cultivation operations. One notable feature of this review is the categorization of the crops studied into distinct groups, which is useful to simplify comparisons in future research.

Surface defects due to bacterial residue on shrimp shell

The changes in the surface chemistry and morphological structure of chitin forms obtained from shrimp shells (ShpS) with and without microorganisms were evaluated. Total mesophilic aerobic bacteria (TMAB), estimated Pseudomonas spp. and Enterococcus spp. were counted in Shp-S by classical cultural counting on agar medium, where the counts were 6.56 ± 0.09, 6.30 ± 0.12, and 3.15 ± 0.03 CFU/g, respectively. Fourier Transform Infrared (FTIR) Spectroscopy and Scanning Electron Microscopy (SEM)/Energy dispersed X-ray (EDX) were used to assess the surface chemistry/functional groups and morphological structure for ChTfree (non-microorganism), and ChTmo (with microorganisms). ChTfree FTIR spectra presented a detailed chitin structure by OH, NH, and CO stretching vibrations, whereas specific peaks of chitin could not be detected in ChTmo. Major differences were also found in SEM analysis for ChTfree and ChTmo. ChTfree had a flat, prominent micropore, partially homogeneous structure, while ChTmo had a layered, heterogeneous, complex dense fibrous, and lost pores form. The degree of deacetylation was calculated for ChTfree and ChTmo according to FTIR and EDX data. The results suggest that the degree of deacetylation decreases in the presence of microorganisms, affecting the production of beneficial components negatively. The findings were also supported by the molecular docking model.

Chitosan-Based Films Blended with Tannic Acid and Moringa Oleifera for Application in Food Packaging: The Preservation of Strawberries (Fragaria ananassa)

Biobased plastics provide a sustainable alternative to conventional food packaging materials, thereby reducing the environmental impact. The present study investigated the effectiveness of chitosan with varying levels of Moringa oleifera seed powder (MOSP) and tannic acid (TA). Chitosan (CS) biocomposite films with tannic acid acted as a cross-linker, and Moringa oleifera seed powder served as reinforcement. To enhance food packaging and film performance, Moringa oleifera seed powder was introduced at various loadings of 1.0, 3.0, 5.0, and 10.0 wt.%. Fourier-transform infrared spectroscopy, X-ray diffraction, and scanning electron microscopy analyses were performed to study the structure and morphology of the CS/TA/MOSP films. The scanning electron microscopy results confirmed that chitosan/TA with 10.0 wt.% of MOSP produced a lightly miscible droplet/matrix structure. Furthermore, mechanical properties, swelling, water solubility, optical barrier, and water contact angle properties of the film were also calculated. With increasing Moringa oleifera seed powder contents, the biocomposite films' antimicrobial and antifungal activity increased at the 10.0 wt.% MOSP level; all of the observed bacteria [Staphylococcus aureus (S. aureus), Escherichia coli (E. coli), Aspergillus niger (A. niger), and Candida albicans (C. albicans)] had a notably increased percentage of growth. The film, with 10.0 wt.% MOSP content, effectively preserves strawberries' freshness, making it an ideal food packaging material.

The Color-Developing Methods for Cultivated Meat and Meat Analogues: A Mini-Review

Novel meat-inspired products, such as cell-cultivated meat and meat analogues, embrace environmental sustainability, food safety and security, animal welfare, and human health, but consumers are still hesitant to accept these products. The appearance of food is often the most persuasive determinant of purchasing decisions for food. Producing cultivated meat and meat analogues with similar characteristics to conventional meat could lead to increased acceptability, marketability, and profitability. Color is one of the sensorial characteristics that can be improved using color-inducing methods and colorants. Synthetic colorants are cheap and stable, but natural pigments are regarded as safer components for novel food production. The complexity of identifying specific colorants to imitate both raw and cooked meat color lies in the differences in ingredients and methods used to produce meat alternatives. Research devoted to improving the sensorial characteristics of meat analogues has noted various color-inducing methods (e.g., ohmic cooking and pasteurization) and additives (e.g., lactoferrin, laccase, xylose, and pectin). Additionally, considerations toward other meat components, such as fat, can aid in mimicking conventional meat appearance. For instance, the use of plant-based fat replacers and scaffolds can produce a marked sensory enhancement without compromising the sustainability of alternative meats. Moving forward, consumer-relevant sensorial characteristics, such as taste and texture, should be prioritized alongside improving the coloration of meat alternatives.

From Food Waste to Functional Biopolymers: Characterization of Chitin and Chitosan Produced from Prepupae of Black Soldier Fly Reared with Different Food Waste-Based Diets

The use of food waste as a rearing substrate to grow insects is an ecofriendly and sustainable alternative to food waste disposal. In the present research, Hermetia illucens prepupae were reared with a standard diet, different food waste-based diets based on vegetables, fruits, and meat, and a mixed one, where the previous three components were present equally. The demineralization and deproteination of the prepupae allowed for the obtainment of chitin that was then deacetylated to produce chitosan. Also, the bleaching of chitosan was attempted for further purification. The yield of the different reactions was investigated, and the infrared spectra of the obtained materials were analyzed to obtain information on the quantity and acetylation degree trend of the chitin and chitosan as a function of the diet. The possibility to slightly modulate the yield and acetylation degree of both biopolymers thanks to the specific diet was enlightened. Interestingly, the standard diet resulted in the highest fraction of chitin having the highest acetylation degree, and in the highest fraction of chitosan having the lowest acetylation degree.

An overview of the potential application of chitosan in meat and meat products

Chitosan is considered the second most ubiquitous polysaccharide next to cellulose. It has gained prominence in various industries including biomedicine, textile, pharmaceutical, cosmetic, and notably, the food industry over the last few decades. The polymer's continual attention within the food industry can be attributed to the increasing popularity of greener means of packaging and demand for foods incorporated with natural alternatives instead of synthetic additives. Its antioxidant, antimicrobial, and film-forming abilities reinforced by the polymer's biocompatible, biodegradable, and nontoxic nature have fostered its usage in food packaging and preservation. Microbial activity and lipid oxidation significantly influence the shelf-life of meat, resulting in unfavorable changes in nutritional and sensory properties during storage. In this review, the scientific studies published in recent years regarding potential applications of chitosan in meat products; and their effects on shelf-life extension and sensory properties are discussed. The utilization of chitosan in the form of films, coatings, and additives in meat products has supported the extension of shelf-life while inducing a positive impact on their organoleptic properties. The nature of chitosan and its compatibility with various materials make it an ideal biopolymer to be used in novel arenas of food technology.

Valorization of biological waste from insect-based food industry: Assessment of chitin and chitosan potential

Edible mealworms can be farmed to produce high-quality nutrients and proteins, useful as ingredients in human and animal foods. During this process biological waste is produced. This work explores the usage of the biological waste as source to produce chitin and chitosan with different potential applications. Different waste fractions were processed, and the feasibility of chitin isolation was assessed. Chitosan was derived, and films were fabricated and tested for intended uses. Data indicate that biopolymers with different properties can be obtained from multiple biological waste fractions. All samples show antibacterial activity, while chitosan films derived from molt show interesting properties for packaging purposes. Films also trigger the expression of anti-inflammatory phenotype markers in macrophage cells, which may be useful for tissue engineering implantation purposes. Altogether, biological waste from insect farming can be used to extract chitin and chitosan with different properties, and therefore, suitable for different applications.

Germination Behavior and Geographical Information System-Based Phenotyping of Root Hairs to Evaluate the Effects of Different Sources of Black Soldier Fly (Hermetia illucens) Larval Frass on Herbaceous Crops

Insect larval frass has been proposed as a fertilizer and amendment, but methods for testing its effects on plants are poorly developed and need standardization. We obtained different types of black soldier fly (Hermetia illucens) frass via the factorial combination of (a) two insect diets, as follows: G (Gainesville = 50% wheat bran, 30% alfalfa meal, 20% maize meal) and W (43% sheep whey + 57% seeds); (b) two frass thermal treatments: NT = untreated and T = treated at 70 °C for 1 h. We tested the effects on the germination of cress (Lepidium sativum L.) and wheat (Triticum durum Desf.) by applying 1:2 w:w water extracts at 0, 25, 50, 75 and 100% concentration. Standardizing frass water content before extraction affected chemical composition. Frass extracts showed high electrical conductivity (8.88 to 13.78 mS cm-1). The W diet was suppressive towards Escherichia coli and showed a lower content of nitrates (e.g., WNT 40% lower than GNT) and a concentration-dependent phytotoxic effect on germinating plants. At 25% concentration, germination indices of G were 4.5 to 40-fold those at 100%. Root and shoot length and root hair area were affected by diet and concentration of frass extracts (e.g., root and shoot length in cress at 25% were, respectively, 4.53 and 2 times higher than at 100%), whereas the effects of the thermal treatment were few or inconclusive. On barley (Hordeum vulgare L.) grown in micropots on a silty loam soil, root mass was reduced by 37% at high extract concentration. A quick procedure for root hair surface area was developed based on the geographic information system (GIS) and may provide a fast method for incorporating root hair phenotyping in frass evaluation. The results indicate that below-ground structures need to be addressed in research on frass effects. For this, phyotoxicity tests should encompass different extract dilutions, and frass water content should be standardized before extraction in the direction of canonical procedures to allow comparisons.

Insect residues as an alternative and promising source for the extraction of chitin and chitosan

This work aimed to obtain and characterize chitin and chitosan extracted from the rearing residues of Tenebrio molitor, Zophobas morio, and Blaptica dubia insects in different growth stages in the same rearing cycles chitin and chitosan yielded 11.21 %-20.89 % and 6.26 %-7.07 %, respectively. The deacetylation degrees of chitosan ranged from 75.75 %-89.21 %, and the solubilities from 69.88 %-94.39 %. Infrared spectroscopy corroborated the acquisition of chitin and chitosan and can be used as a semi-quantitative technique for determining the degree of chitosan deacetylation. The X-ray diffraction profiles revealed the presence of α-chitin, and the relative crystalline indices ranged from 65.9 %-89.2 %. Typical TG profiles with two thermal events are observed for chitin and chitosan samples with different residue contents from the extraction procedure. The chitosan solutions exhibited pseudoplastic behavior, with apparent viscosities ranging from 195.96 to 249.86 mPa.s. The characterization results of the biopolymers extracted from insect residues were similar to those obtained from conventional sources. The growth stage influenced the chitin yield and crystallinity index. The results of this study reinforce the feasibility of using alternative sources of chitin and chitosan, providing the use of waste from insect farms and contributing to sustainability and a circular economy.

Hermetia illucens, an innovative and sustainable source of chitosan-based coating for postharvest preservation of strawberries

The ability of chitosan produced from pupal exuviae of Hermetia illucens to retard the decay of the local strawberry (Fragaria x ananassa) cultivar Melissa was investigated for the first time in this paper. The results demonstrated the effectiveness of insect chitosan compared to the commercial polymer in preserving and enhancing, at the same time, some physicochemical parameters (weight loss, pH and soluble solids content) and nutraceutical properties (total polyphenol content, total flavonoid content and total antioxidant activity) of strawberries stored at RT, 4°C and at mixed storage conditions (4°C + RT). Moreover, chitosan from H. illucens was also effective in reducing fungal decay and improving fruit shelf life. The obtained results confirm that insect chitosan, particularly deriving from H. illucens pupal exuviae, can be a viable alternative to crustacean one in safeguarding postharvest fruits.

Chitin, chitosan and chitooligosaccharides as potential growth promoters and immunostimulants in aquaculture: A comprehensive review

There is a stable growth in aquaculture production to avoid seafood scarcity. The usage of eco-friendly feed additives is not only associated with aquatic animal health but also reduces the risk of deleterious effects to the environment and consumers. Aquaculture researchers are seeking dietary solutions to improve the growth performance and yield of target organisms. A wide range of naturally derived compounds such as probiotics, prebiotics, synbiotics, complex carbohydrates, nutritional factors, herbs, hormones, vitamins, and cytokines was utilized as immunostimulants in aquaculture. The use of polysaccharides derived from natural resources, such as alginate, agar, laminarin, carrageenan, fucoidan, chitin, and chitosan, as supplementary feed in aquaculture species has been reported. Polysaccharides are prebiotic substances which are enhancing the immunity, disease resistance and growth of aquatic animals. Further, chitin (CT), chitosan (CTS) and chitooligosaccharides (COS) were recognized for their biodegradable properties and unique biological functions. The dietary effects of CT, CTS and COS at different inclusion levels on growth performance, immune response and gut microbiota in aquaculture species has been reviewed. The safety regulations, challenges and future outlooks of CT, CTS and COS in aquatic animals have been discussed in this review.

Nature to Nurture: Chitosan nanopowder a natural carbohydrate polymer choice of egg parasitoid, Trichogramma Japonicum Ashmead

Chitosan is a naturally occurring linear biopolymer made of partially deacetylated acetyl and N-acetyl glucosamine. Its biocompatible physiochemical and biochemical properties are unmatched. Chitosan is transformed to nanopowder for use in agriculture and associated industries as nanocarriers for existing agrochemicals, ensuring the delayed release of chemicals with better solubility. Chitosan nanopowder applied to leaves or soil can activate a plant's natural defences against insects and pathogens. These studies were carried out because there is a potential for toxicological risk linked with products created utilizing nanotechnology, such as chitosan nanopowder, and therefore researchers felt the need to investigate this. The egg parasitoides Trichogramma Japonicum Ashmead was used as a low-cost biomarker to determine the potential toxicity of chitosan nanopowder. This study looked into the possibility that the adult stage of the egg parasitoids, Trichogramma Japonicum Ashmead might be negatively impacted by chitosan nanopowder (80-100 nm). Unpaired t-test statistical analysis has been carried out. According to the statistical analysis, host eggs exposed to chitosan nanopowder showed noticeably greater parasitization than the control group. As a natural supply of carbohydrate polymers chitosan nanopowder promotes the parasitization of T. Japonicum. The findings showed that T. Japonicum favoured chitosan nanopowder. Through Y dual choice, eight-arm multiple choice, and no-choice olfactometer experiments, as well as images from a stereozoom microscope and a scanning electron microscope (SEM), the data was thoroughly supported. Future agricultural applications of chitosan nanopowder will benefit from a deeper understanding of our findings.

Chitosan and Its Derivatives: Preparation and Antibacterial Properties

This comprehensive review illuminates the various methods of chitosan extraction, its antibacterial properties, and its multifarious applications in diverse sectors. We delve into chemical, physical, biological, hybrid, and green extraction techniques, each of which presents unique advantages and disadvantages. The choice of method is dictated by multiple variables, including the desired properties of chitosan, resource availability, cost, and environmental footprint. We explore the intricate relationship between chitosan's antibacterial activity and its properties, such as cationic density, molecular weight, water solubility, and pH. Furthermore, we spotlight the burgeoning applications of chitosan-based materials like films, nanoparticles, nonwoven materials, and hydrogels across the food, biomedical, and agricultural sectors. The review concludes by highlighting the promising future of chitosan, underpinned by technological advancements and growing sustainability consciousness. However, the critical challenges of optimizing chitosan's production for sustainability and efficiency remain to be tackled.

N-acetyl-d-glucosamine-based oligosaccharides from chitin: Enzymatic production, characterization and biological activities

Chitin, the second most abundant biopolymer, possesses diverse applications in the food, agricultural, and pharmaceutical industries due to its functional properties. However, the potential applications of chitin are limited owing to its high crystallinity and low solubility. N-acetyl chitooligosaccharides and lacto-N-triose II, the two types of GlcNAc-based oligosaccharides, can be obtained from chitin by enzymatic methods. With their lower molecular weights and improved solubility, these two types of GlcNAc-based oligosaccharides display more various beneficial health effects when compared to chitin. Among their abilities, they have exhibited antioxidant, anti-inflammatory, anti-tumor, antimicrobial, and plant elicitor activities as well as immunomodulatory and prebiotic effects, which suggests they have the potential to be utilized as food additives, functional daily supplements, drug precursors, elicitors for plants, and prebiotics. This review comprehensively covers the enzymatic methods used for the two types of GlcNAc-based oligosaccharides production from chitin by chitinolytic enzymes. Moreover, current advances in the structural characterization and biological activities of these two types of GlcNAc-based oligosaccharides are summarized in the review. We also highlight current problems in the production of these oligosaccharides and trends in their development, aiming to offer some directions for producing functional oligosaccharides from chitin.

Isolation, biochemical characterization, and genome sequencing of two high-quality genomes of a novel chitinolytic Jeongeupia species

Chitin is the second most abundant polysaccharide worldwide as part of arthropods' exoskeletons and fungal cell walls. Low concentrations in soils and sediments indicate rapid decomposition through chitinolytic organisms in terrestrial and aquatic ecosystems. The enacting enzymes, so-called chitinases, and their products, chitooligosaccharides, exhibit promising characteristics with applications ranging from crop protection to cosmetics, medical, textile, and wastewater industries. Exploring novel chitinolytic organisms is crucial to expand the enzymatical toolkit for biotechnological chitin utilization and to deepen our understanding of diverse catalytic mechanisms. In this study, we present two long-read sequencing-based genomes of highly similar Jeongeupia species, which have been screened, isolated, and biochemically characterized from chitin-amended soil samples. Through metabolic characterization, whole-genome alignments, and phylogenetic analysis, we could demonstrate how the investigated strains differ from the taxonomically closest strain Jeongeupia naejangsanensis BIO-TAS4-2T (DSM 24253). In silico analysis and sequence alignment revealed a multitude of highly conserved chitinolytic enzymes in the investigated Jeongeupia genomes. Based on these results, we suggest that the two strains represent a novel species within the genus of Jeongeupia, which may be useful for environmentally friendly N-acetylglucosamine production from crustacean shell or fungal biomass waste or as a crop protection agent.

Treatment of wastewater using Black Soldier Fly larvae: Effect of organic concentration and load

Recent studies have investigated the use of Black Soldier Fly (BSF) larvae as a promising biological treatment process for high organic content wastewater (i.a. Leachate from municipal solid waste landfill, food processing effluents), achieving both high treatment efficiency and production of secondary resources from larval biomass (i.a. Proteins and lipids). The present study was aimed at achieving a better understanding of how organic concentration and load might influence treatment performance. Larvae were fed with three artificial wastewaters characterised by same organic substances quality (degree of biodegradability and oxidation of the organic content measured respectively as BOD/COD and TOC/COD ratios) but different organic concentrations. Each type of wastewater was tested at four different loads. Treatment performance was assessed by monitoring both larval growth (in terms of weight variation, mortality and prepupation), and variation of wastewater quality and quantity to determine organic substrate consumption (measured in terms of Total Organic Carbon, TOC). Larval starvation was observed in all tests when TOC concentrations dropped below approx. 1000 mg C/L, which, for the tested wastewater, could be assumed as the limit value for adopting BSF larvae process. Substrate concentration in the feed (mgC/L) influenced larval growth (in terms of maximum wet weight, prepupation and mortality) only when organic load was above 10 mgC/larva: the higher the load, the higher the positive impact of the substrate concentration. On the contrary, the specific substrate consumption rate (v_S, mgC/larva/day) appeared not to be influenced by substrate concentration but only by the organic load, with a Michaelis Menten like relationship. Accordingly, substrate load can be assumed as a design parameter for BSF treatment process, while substrate concentration might only influence potential resource recovery from larval biomass.

Extraction of chitosan from biologically-derived chitin by bacterial chitin deacetylase: Process optimization and product quality assessment

Commercial chitosan manufacturing process relies on strong chemical treatment on chitin that generates chitosan with undesirable properties and leads to environmental pollution. To overcome the adverse consequences, enzymatic chitosan preparation from chitin was undertaken in the current study. A potent chitin deacetylase (CDA) producing bacterial strain was screened and subsequently identified as Alcaligens faecalis CS4. After optimization 40.69 U/ml of CDA production was achieved. By treating the organically extracted chitin with partially purified CDA chitosan yield of 19.04 % was attained having 71 % solubility, 74.9 % degree of deacetylation, 21.16 % crystallinity index, 246.4 kDa molecular weight and 298 °C highest-decomposition temperature. FTIR and XRD analysis revealed characteristics peaks respectively within 870-3425 cm^-1 wavenumber and 10°-20°, for enzymatically and chemically extracted (commercial) chitosan that endorses their structural similarity which validated through electron microscopic study. At 10 mg/ml chitosan concentration 65.49 % DPPH radical scavenging activity endorsed its antioxidant potential. Minimum inhibitory concentration of chitosan was 0.675, 1.75, 0.33 and 0.75 mg/ml for Streptococcus mutans, Enterococcus faecalis, Escherichia coli and Vibrio sp., respectively. Mucoadhesiveness and cholesterol binding properties were also exhibited by extracted chitosan. The present study opens a new vista for eco-friendly extraction of chitosan from chitin that is proficient and sustainable in environmental perspective.

Effects of chitin and chitosan on root growth, biochemical defense response and exudate proteome of Cannabis sativa

Fungal pathogens pose a major threat to Cannabis sativa production, requiring safe and effective management procedures to control disease. Chitin and chitosan are natural molecules that elicit plant defense responses. Investigation of their effects on C. sativa will advance understanding of plant responses towards elicitors and provide a potential pathway to enhance plant resistance against diseases. Plants were grown in the in vitro Root-TRAPR system and treated with colloidal chitin and chitosan. Plant morphology was monitored, then plant tissues and exudates were collected for enzymatic activity assays, phytohormone quantification, qPCR analysis and proteomics profiling. Chitosan treatments showed increased total chitinase activity and expression of pathogenesis-related (PR) genes by 3-5 times in the root tissues. In the exudates, total peroxidase and chitinase activities and levels of defense proteins such as PR protein 1 and endochitinase 2 were increased. Shoot development was unaffected, but root development was inhibited after chitosan exposure. In contrast, chitin treatments had no significant impact on any defense parameters, including enzymatic activities, hormone quantities, gene expression levels and root secreted proteins. These results indicate that colloidal chitosan, significantly enhancing defense responses in C. sativa root system, could be used as a potential elicitor, particularly in hydroponic scenarios to manage crop diseases.

Applications and perspectives of quaternized cellulose, chitin and chitosan: A review

Recently, increasing attention has been paid to natural polysaccharides for their low cost, biocompatibility and biodegradability. Quaternization is a modification method to improve the solubility and antibacterial ability of natural polysaccharides. Water-soluble derivatives of cellulose, chitin and chitosan offer the prospect of diverse applications in a wide range of fields, such as antibacterial products, drug delivery, wound healing, sewage treatment and ion exchange membranes. By combining the inherent properties of cellulose, chitin and chitosan with the inherent properties of the quaternary ammonium groups, new products with multiple functions and properties can be obtained. In this review, we summarized the research progress in the applications of quaternized cellulose, chitin and chitosan in recent five years. Moreover, ubiquitous challenges and personal perspectives on the further development of this promising field are also discussed.

Polysaccharides-Naturally Occurring Immune Modulators

The prevention of disease and infection requires immune systems that operate effectively. This is accomplished by the elimination of infections and abnormal cells. Immune or biological therapy treats disease by either stimulating or inhibiting the immune system, dependent upon the circumstances. In plants, animals, and microbes, polysaccharides are abundant biomacromolecules. Due to the intricacy of their structure, polysaccharides may interact with and impact the immune response; hence, they play a crucial role in the treatment of several human illnesses. There is an urgent need for the identification of natural biomolecules that may prevent infection and treat chronic disease. This article addresses some of the naturally occurring polysaccharides of known therapeutic potential that have already been identified. This article also discusses extraction methods and immunological modulatory capabilities.

In Vitro Evaluation of the Antibacterial Activity of the Peptide Fractions Extracted from the Hemolymph of Hermetia illucens (Diptera: Stratiomyidae)

Antimicrobial peptides (AMPs) are a chemically and structurally heterogeneous family of molecules produced by a large variety of living organisms, whose expression is predominant in the sites most exposed to microbial invasion. One of the richest natural sources of AMPs is insects which, over the course of their very long evolutionary history, have adapted to numerous and different habitats by developing a powerful innate immune system that has allowed them to survive but also to assert themselves in the new environment. Recently, due to the increase in antibiotic-resistant bacterial strains, interest in AMPs has risen. In this work, we detected AMPs in the hemolymph of Hermetia illucens (Diptera, Stratiomyidae) larvae, following infection with Escherichia coli (Gram negative) or Micrococcus flavus (Gram positive) and from uninfected larvae. Peptide component, isolated via organic solvent precipitation, was analyzed by microbiological techniques. Subsequent mass spectrometry analysis allowed us to specifically identify peptides expressed in basal condition and peptides differentially expressed after bacterial challenge. We identified 33 AMPs in all the analyzed samples, of which 13 are specifically stimulated by Gram negative and/or Gram positive bacterial challenge. AMPs mostly expressed after bacterial challenge could be responsible for a more specific activity.

Preliminary investigation on the effect of insect-based chitosan on preservation of coated fresh cherry tomatoes

Chitosan was produced from Hermetia illucens pupal exuviae by heterogeneous and homogeneous deacetylation. Tomato fruits (Solanum lycopersicum), that are one of the most grown and consumed food throughout the world, were coated with 0.5 and 1% chitosan, applied by dipping or spraying, and stored at room temperature or 4 °C, for a storage period of 30 days. Statistical analysis give different results depending on the analysed parameters: heterogeneous chitosan, indeed, had a better effect than the homogenous one in maintaining more stable physico-chemical parameters, while the homogenous chitosan improved the total phenols, flavonoids and antioxidant activity. Chitosan coatings applied by spraying were more effective in all the analyses. Chitosan derived from H. illucens always performed similarly to the commercial chitosan. However, a general better performance of insect-derived chitosan on the concentration of phenolics and flavonoids, and the antioxidant activity was observed as compared to the commercial one. Chitosan coating has already been successfully used for preservation of fresh fruits, as alternative to synthetic polymers, but this is the first investigation of chitosan produced from an insect for this application. These preliminary results are encouraging regarding the validation of the insect H. illucens as a source of chitosan.

Chitosan-Based Nano-Smart Drug Delivery System in Breast Cancer Therapy

Despite recent advances, cancer remains the primary killer on a global scale. Numerous forms of research have been conducted to discover novel and efficient anticancer medications. The complexity of breast cancer is a major challenge which is coupled with patient-to-patient variations and heterogeneity between cells within the tumor. Revolutionary drug delivery is expected to provide a solution to that challenge. Chitosan nanoparticles (CSNPs) have prospects as a revolutionary delivery system capable of enhancing anticancer drug activity and reducing negative impacts on normal cells. The use of smart drug delivery systems (SDDs) as delivering materials to improve the bioactivity of NPs and to understand the intricacies of breast cancer has garnered significant interest. There are many reviews about CSNPs that present various points of view, but they have not yet described a series in cancer therapy from cell uptake to cell death. With this description, we will provide a more complete picture for designing preparations for SDDs. This review describes CSNPs as SDDSs, enhancing cancer therapy targeting and stimulus response using their anticancer mechanism. Multimodal chitosan SDDs as targeting and stimulus response medication delivery will improve therapeutic results.

A novel chitinous nanoparticles prepared and characterized with black soldier fly (Hermetia illucens L.) using steam flash explosion treatment

This is the first report of the use of steam flash explosion (SFE) to prepare chitinous nanoparticles from black soldier fly (BSF). SFE treatment was performed at a steam pressure of 0.45 to 1.60 MPa with a holding time of 60 s. As the pressure increased, the particle size of the chitinous particles decreased. Under SFE at 1.60 MPa, chitinous nanoparticles with sizes ranging from 59 to 162 nm were produced. SEM, AFM, Raman spectroscopy, FT-IR spectroscopy, ¹H NMR, TGA, and DSC were used to characterize the BSF chitin materials. It was demonstrated that SFE treatment deacetylated chitin to obtain chitosan with 91.24 % deacetylation. In addition, the polymer backbone was maintained, and the degree of polymerization of chitosan nanoparticles was reduced. The activity of the cationic groups of chitosan nanoparticles was improved, thereby enhancing the temperature sensitivity of the polymeric material. It can be concluded that the SFE one-step processing method is a simple and efficient way to prepare homogeneous biomaterial nanoparticles. This study has implications for the development of chitosan nanomaterials for biomedical applications.

Effect of milling intensity on the properties of chitin, chitosan and chitosan films obtained from grasshopper

To obtain high-quality insect products, milling was used as a modification tool and its effect on grasshopper chitin, chitosan and chitosan films was investigated. Three grasshopper powders were obtained and classified into coarse-milled powder (CMP, D90 = 956 μm), medium-milled powder (MMP, D90 = 492 μm), and ultrafine-milled powder (UMP, D90 = 79.1 μm). Fourier transform infrared spectroscopy illustrated that no drastic change due to milling was observed, but the crystallinity (X-ray diffraction) and thermal stability (Thermogravimetric analysis) of the chitin, chitosan and chitosan films reduced with increasing milling intensity. Besides, the purity of the chitin and the yield of chitosan obtained from UMP were improved. Chitosan prepared from UMP was also characterized by high degree of deacetylation (65.6 %) and solubility and rather low molecular weight (11.5 kDa), viscosity and water/fat binding capacity. The finer the powder used as the extraction material, the thinner the chitosan films and the more compact the structure. On the whole, the chitosan films prepared from the MMP had higher mechanical properties and better moisture-keeping ability on strawberries compared with CMP and UMP films. This study establishes the role milling intensity played in the modification of grasshopper products and provides a reference for practical applications.