Study of the evolution and degradation products of ciprofloxacin and oxolinic acid in river water samples by HPLC-UV/MS/MS-MS

Durable fluorinated cobalt oxyhydroxide/calcium alginate hydrogels for activating peroxymonosulfate to enable nearly 100% degradation of ciprofloxacin

Peroxymonosulfate (PMS) activation by solid catalysts for ciprofloxacin (CIP) removal is a promising method for decontaminating wastewater. However, mainstream catalysts suffer from efficiency and durability issues due to mechanical fragility and structural instability. Here, we have developed a durable calcium alginate hydrogel encapsulating fluorinated cobalt oxyhydroxide (FCO/CAH), fabricated by a simple hydrogen-bond-assisted cross-linking reaction, to enhance PMS activation for complete CIP removal. The optimized 2-FCO/CAH could generate abundant singlet oxygen (1O2) and sulfate radicals (SO4˙-) with PMS, resulting in 0.433 min-1 kinetic constant and approximately 100% CIP degradation within 10 minutes. This exceptional degradation efficiency is due to the even distribution of 2-FCO, which maximizes catalytic sites for PMS activation, and the multichannel cavity structure of CAH, which effectively enriches both PMS and CIP. Furthermore, the durability of 2-FCO/CAH was proved by its negligible decay in CIP removal efficiency (∼100%) and good microstructure retention after 6 consecutive cycles, facilitated by a stable surface reconstructed interphase on the 2-FCO surface and the strong mechanical property of 2-FCO/CAH. Our work showcases a facile approach to constructing durable hydrogel catalysts that improve PMS-mediated antibiotic degradation.

Review on antibiotic pollution dynamics: insights to occurrence, environmental behaviour, ecotoxicity, and management strategies

Antibiotic contamination poses a significant global concern due to its far-reaching impact on public health and the environment. This comprehensive review delves into the prevalence of various antibiotic classes in environmental pollution and their interactions with natural ecosystems. Fluoroquinolones, macrolides, tetracyclines, and sulphonamides have emerged as prevalent contaminants in environmental matrices worldwide. The concentrations of these antibiotics vary across diverse environments, influenced by production practices, consumer behaviours, and socio-economic factors. Low- and low-middle-income countries face unique challenges in managing antibiotic contamination, with dominant mechanisms like hydrolysis, sorption, and biodegradation leading to the formation of toxic byproducts. Ecotoxicity reports reveal the detrimental effects of these byproducts on aquatic and terrestrial ecosystems, further emphasizing the gravity of the issue. Notably, monitoring the antibiotic parent compound alone may be inadequate for framing effective control and management strategies for antibiotic pollution. This review underscores the imperative of a comprehensive, multi-sectoral approach to address environmental antibiotic contamination and combat antimicrobial resistance. It also advocates for the development and implementation of tailored national action plans that consider specific environmental conditions and factors. Thus, an approach is crucial for safeguarding both public health and the delicate balance of our natural ecosystems.

Construction of carbon quantum dots/riboflavin fluorescent probe and its application in the detection of ciprofloxacin

The research outlined a novel approach for creating a sensitive and efficient ratio fluorescent probe for ciprofloxacin (CIP) detection. The method used the biomass materials passionfruit shell and diethylenetriamine as carbon and nitrogen sources, respectively, to prepare blue fluorescent carbon quantum dots (b-CQDs) with an average size of 3.29 nm and a quantum yield of 19.6% by a hydrothermal method. The newly designed b-CQDs/riboflavin ratio fluorescent probe demonstrates a distinct advantage for CIP monitoring, exhibiting a marked increase in fluorescence intensity at 445 nm upon interaction with CIP, while maintaining a stable intensity at 510 nm. In the water system, the I445 nm/I510 nm ratio of the fluorescent probe showed a significant linear relationship with CIP at the concentrations of 0-250 μmol·L-1, and the probe boasts a low detection limit of 0.86 μmol·L-1. The outstanding selectivity, broad detection range, low detection limits, and high quantum yield of the b-CQDs highlight their significant potential in the development of advanced sensing probes for efficient detection of ciprofloxacin, offering promising insights for future sensor technology advancements.

Electrochemical fingerprinting of cephalosporin antibiotics and its applications for investigations of hydrolysis behavior

Cephalosporin, as one of the most widely used antibiotics, study of its hydrolysis process is important for predicting their environmental persistence. Two critical factors are considered has the first priority, which are hydrolysis rate constant (k_h) and half-life (t_1/2). To date, many efforts have been made by using various analytical techniques to obtain the data for calculating k_h and t_1/2. However, the typical techniques such as UV/vis spectrophotometry and liquid chromatography are of significant challenges like low accuracy and timely operations. Herein, we explored an electrochemical method by identifying the characteristic peaks with the same parent nuclear structure through square wave voltammetry (SWV). This proposed electrochemical fingerprinting was able to track the hydrolysis of intact cephalosporin molecules, β-lactam ring, and transformation product. The k_h and t_1/2 of cefadroxil (CDX) under pH = 7 and 25 °C by electrochemical (0.0640 d^-1 and 11.0 d) were consistent with those of high-performance liquid chromatography-UV/vis (HPLC-UV/vis) (0.0660 d^-1 and 10.7 d). The t_1/2 ranged from 3.40 to 36.2 d, 7.33 d-43.7 d and 9.63 d-45.3 d for base-catalyzed, neutral pH and acid-catalyzed hydrolysis hydrolyzed, respectively, indicating that base-catalyzed hydrolysis rates were the greatest under alkaline conditions. Meanwhile, hydrolysis rates increased 2.50-3.60-fold for every 10 °C raise in temperature. Besides, the electrochemical fingerprinting could realize cephalosporin and β-lactam ring hydrolysis rates close to 100% in-situ hydrolysis process monitoring. This present work provides a powerful technology for understanding the environmental fate and predicting the environmental behavior of antibiotics with fast, high accuracy, specific recognition, and in situ monitoring.

Photodegradation of oxolinic acid in aquaculture effluents under solar irradiation: is it possible to enhance efficiency by the use of TiO2/carbon quantum dots composites?

Antibiotics, such as oxolinic acid (OXA), in aquaculture effluents contribute to the dissemination of antimicrobial resistance, which makes it urgent to develop efficient and sustainable processes for their removal. Aiming a photocatalytic degradation under solar radiation, different carbon quantum dots (CQDs) were produced in this work through a bottom-up hydrothermal methodology and incorporated into TiO₂ by a simple calcination method. A total of thirteen materials were synthesized and tested for OXA photocatalytic removal from synthetic and real matrices. Among them, CQDs produced with citric acid and incorporated into TiO₂ at 4% (w/w) (TiO₂/CQDs-CA 4% (w/w)) were the most efficient photocatalysts, providing an OXA half-life time (t_1/2) decrease of 91%, 79% and 85% in phosphate buffer solution (PBS), synthetic sea salts (SSS) and brackish aquaculture effluent (BAE), respectively. Therefore, the herein synthesized TiO₂/CQDs-CA 4% (w/w) composites have shown to be promising materials for a sustainable solar-driven removal of antibiotics from aquaculture effluents.

Green synthesis of two-electron centre based ZnO/NiCo2S4 QDs-OVs using Punica granatum fruit peel extract for an exceptional visible light photocatalytic degradation of doxycycline and ciprofloxacin

Biosynthesis of nanomaterials using plant extract makes them attractive in the field of photocatalysis as they are environmental friendly. The current study focused on the biosynthesis of ZnO/NiCo₂S₄ QDs (NCs) using Punica granatum fruit peel extract as the reducing agent. The nanomaterials were characterized with XRD, FTIR, Raman, SEM, TEM, UV-vis DRS, BET, PL, EIS, and ESR analysis and were used for photocatalytic degradation of doxycycline (DOX) and ciprofloxacin (CIP). The bandgap of ZnO is 3.2 eV, and the decoration of NiCo₂S₄ QDs aids in narrowing the bandgap (2.8 eV), making the NCs visible light active. The fabricated NCs achieved 99 and 89% degradation of DOX and CIP respectively. The photocatalytic efficiency of ZnO/NiCo₂S₄ QDs was much higher compared to individual ZnO and NiCo₂S₄ QDs. The half-life period of DOX and CIP were evaluated to be 58 and 152 min respectively. The percentage of TOC removal in the photodegraded product of DOX and CIP was estimated to be 99 and 89% respectively, indicating the mineralization of the compounds. The enhanced photocatalytic efficiency of the NCs was attributed to the narrowed visible light active bandgap, synergistic charge transfer across the interface, and lower charge recombination. The intermediates formed during the photocatalytic degradation of DOX and CIP were analyzed using GC-MS/MS analysis, and the photodegradation pathway was elucidated. Also, the toxicity of the intermediates was computationally analyzed using ECOSAR software. The fabricated ZnO/NiCo₂S₄ QDs have excellent stability and reusability, confirmed by XRD and XPS analysis. The reusable efficiency of the NCs for the photocatalytic degradation of DOX and CIP were 98.93, and 99.4% respectively. Thus, the biologically fabricated NCs are shown to be an excellent photocatalyst and have wide applications in environmental remediation.

Occurrence and temporal variation of antibiotics and antibiotic resistance genes in hospital inpatient department wastewater: Impacts of daily schedule of inpatients and wastewater treatment process

The temporal variation of antibiotics and ARGs as well as the impact of daily schedule of inpatients on their regular occurrence in hospital wastewater (HWW) were previously obscure. In this study, the wastewater of the inpatient department pre- and posttreatment (hydraulic retention time = 8 h) was collected intraday and intraweek. The absolute concentrations of antibiotics/metabolites and ARGs in HWW were analyzed to investigate the temporal variations of their occurrence levels. Fluoroquinolones were the predominant drugs used in the inpatient department (681.30-881.66 ng/mL in the effluent) and the main contaminant in the outlet of the disinfection pond (538.29-671.47 ng/mL). Diurnal variations peaked at 19:00 for most antibiotics and ARGs, while the maximum of them occurred on weekends. Aminoglycoside resistance genes (AMRGs, 21.6-23000 copies/mL) and β-lactam resistance genes (BLGRs, 1.24-8500 copies/mL) were the dominant ARGs before and after treatment processing, respectively (p < 0.05). The significant removal rates (>50%) of most antibiotics and ARGs, as well as the integrase gene intI1 and 16S rRNA gene, were found to be subjected solely to the chloride disinfection process, suggesting the necessity of the self-contained wastewater treatment process. Meanwhile, the statistically significant correlation among antibiotics, ARGs, intI1, and 16S rRNA (p < 0.05) demonstrated that the risk of selective pressure, horizontal transfer and vertical propagation of ARGs in the effluent of the hospital was warranted. Principal component analysis (PCA) showed that the daily schedule of inpatients and wastewater treatment processes could markedly induce fluctuations in antibiotic and ARG levels in HWW, indicating that they should be considered an impact factor for environmental monitoring. This study demonstrated for the first time the temporal variations in the abundance and dissemination of antibiotics and ARGs in a semiclosed zone and provided new insight into the development of assessments of the associated ecological risk and human health.

Occurrence and removal of antibiotics, antibiotic resistance genes, and bacterial communities in hospital wastewater

Hospital wastewater contains a variety of human antibiotics and pathogens, which makes the treatment of hospital wastewater essential. However, there is a lack of research on these pollutants at hospital wastewater treatment plants. In this study, the characteristics and removal of antibiotics and antibiotic resistance genes (ARGs) in the independent treatment processes of hospitals of different scales (primary hospital, H1; secondary hospital, H2; and tertiary hospital, H3) were investigated. The occurrence of antibiotics and ARGs in wastewater from three hospitals varied greatly. The first-generation cephalosporin cefradine was detected at a concentration of 2.38 μg/L in untreated wastewater from H1, while the fourth-generation cephalosporin cefepime had the highest concentration, 540.39 μg/L, at H3. Ofloxacin was detected at a frequency of 100% and had removal efficiencies of 44.2%, 51.5%, and 81.6% at H1, H2, and H3, respectively. The highest relative abundances of the β-lactam resistance gene bla_GES-1 (1.77×10^-3 copies/16S rRNA), the quinolone resistance gene qnrA (8.81×10^-6 copies/16S rRNA), and the integron intI1 (1.86×10^-4 copies/16S rRNA) were detected in the treated wastewater. The concentrations of several ARGs were increased in the treated wastewater (e.g. bla_OXA-1, bla_OXA-10, and bla_TEM-1). Several pathogenic or opportunistic bacteria (e.g. Acinetobacter, Klebsiella, Aeromonas, and Pseudomonas) were observed at high relative abundances in the treated wastewater. These results suggested the co-occurrence of antibiotics, ARGs, and antibiotic-resistant pathogens in hospital wastewater, and these factors may spread into the receiving aquatic environment.

Enhanced activated persulfate oxidation of ciprofloxacin using a low-grade titanium ore under sunlight: influence of the irradiation source on its transformation products

In this work, the activated persulfate oxidation of ciprofloxacin (CIP) using a low-grade titanium ore under sunlight or simulated sunlight were conducted to analyze the CIP degradation efficiency and to identify the transformation products (TPs) generated during oxidation under both types of irradiation sources by using liquid chromatography-quadrupole time-of-flight mass spectrometry (LC-QTOF-MS). All advance oxidation process experiments were performed in a 2700-mL raceway reactor at a pH value of ~ 6.5 and an initial CIP concentration of 1 mg/L, during 90 min of reaction time. The control experiments carried out under simulated sunlight achieved a 97.7 ± 0.6% degradation efficiency, using 385 W/m² of irradiation with an average temperature increase of 11.7 ± 0.6 °C. While, the experiments under sunlight reached a 91.2 ± 1.3% degradation efficiency, under an average irradiation value of 19.2 ± 0.3 W/m² in October-November 2019 at hours between 11:00 am and 3:00 pm with an average temperature increase of 1.4 ± 0.8 °C. Mass spectrometry results indicated that 14 of the 108 possible TPs reported in the literature were detected. The calculated exact mass, measured accurate mass, and its characteristic diagnostic fragment ions were listed, and two new TPs were tentative identified. The TP generation analysis showed that some specific compounds were detected in different time intervals with kinetic variations depending on the irradiation used. Consequently, two CIP degradation pathways were proposed, since the type of irradiation determines the CIP degradation mechanism. Graphical abstract.

Optimization of a Method for Extraction and Determination of Residues of Selected Antimicrobials in Soil and Plant Samples Using HPLC-UV-MS/MS

The residues of antimicrobials used in human and veterinary medicine are popular pollutants of anthropogenic origin. The main sources of introducing antimicrobials into the environment are sewage treatment plants and the agricultural industry. Antimicrobials in animal manure contaminate the surrounding soil as well as groundwater, and can be absorbed by plants. The presence of antimicrobials in food of plant origin may pose a threat to human health due to their high biological activity. As part of the research, a procedure was developed for the extraction and determination of ciprofloxacin, enrofloxacin, cefuroxime, nalidixic acid and metronidazole in environmental samples (soil and parsley root). An optimized solid-liquid extraction (SLE) method was used to separate antimicrobials from the solid samples and a mixture of citrate buffer (pH = 4): methanol (1:1; v/v) was used as the extraction solvent. Solid phase extraction (SPE) with OASIS^® HLB cartridges was used to purify and pre-concentrate the sample. The recovery of the developed method was in the range of 55–108%. Analytes were determined by high-performance liquid chromatography coupled with an ultraviolet (UV) detector and a tandem mass spectrometer (HPLC-UV-MS/MS). The procedure was validated and applied to the determination of selected antimicrobials in soil and parsley root samples. Five types of soil and five types of parsley roots of different origins were analyzed. The presence of nalidixic acid in the parsley root samples was found in the concentration range of 0.14–0.72 ng g⁻¹. It has been shown that antimicrobials are absorbed by the plant and can accumulate antimicrobials in its edible parts.

Oxolinic acid in aquaculture waters: Can natural attenuation through photodegradation decrease its concentration?

Quinolones, such as oxolinic acid (OXA), are antimicrobials commonly used in aquaculture. Thus, its presence in the aquatic environment surrounding aquaculture facilities is quite easy to understand. When present in aquatic environment, pharmaceuticals may be subjected to several attenuation processes that can influence their persistence. Photodegradation, particularly for antibiotics, can have significant importance since these compounds may be resistant to microbial degradation. OXA photodegradation studies reported in literature are very scarce, especially using aquaculture waters, but are markedly important for an appropriate risk assessment. Results hereby presented showed a decrease on photodegradation rate constant from 0.70 ± 0.02 h^-1 in ultrapure water to 0.42 ± 0.01 h^-1 in freshwater. The decrease on photodegradation rate constant was even more pronounced when brackish water was used (0.172 ± 0.003 h^-1). In order to understand which factors contributed to the observed behaviour, environmental factors, such as natural organic matter and salinity, were studied. Results demonstrated that dissolved organic matter (DOM) may explain the decrease of OXA photodegradation observed in freshwater. However, a very sharp decrease of OXA photodegradation was observed in solutions containing NaCl and in synthetic sea salts, which explained the higher decrease observed in brackish water. Moreover, under solar radiation, the use of an ¹O₂ scavenger allowed us to verify a pronounced retardation of OXA decay, suggesting that ¹O₂ plays an important role in OXA photodegradation process.

Antimicrobials and Antibiotic-Resistant Bacteria: A Risk to the Environment and to Public Health

The release of antibiotics to the environment, and the consequences of the presence of persistent antimicrobial residues in ecosystems, have been the subject of numerous studies in all parts of the world. The overuse and misuse of antibiotics is a common global phenomenon, which substantially increases the levels of antibiotics in the environment and the rates of their spread. Today, it can be said with certainty that the mass production and use of antibiotics for purposes other than medical treatment has an impact on both the environment and human health. This review aims to track the pathways of the environmental distribution of antimicrobials and identify the biological effects of their subinhibitory concentration in different environmental compartments; it also assesses the associated public health risk and government policy interventions needed to ensure the effectiveness of existing antimicrobials. The recent surge in interest in this issue has been driven by the dramatic increase in the number of infections caused by drug-resistant bacteria worldwide. Our study is in line with the global One Health approach.

Fate and removal of Ciprofloxacin in an anaerobic membrane bioreactor (AnMBR)

This study examined the removal of varying concentrations of the antibiotic Ciprofloxacin (CIP) over the long-term (120 days) in an anaerobic membrane bioreactor (AnMBR). The results showed that 50-76% CIP was removed with 0.5-1.5 mg CIP/L in the feed, although at 4.7 mg/L its removal efficiency decreased to <20%. It was found that biological degradation was the main mechanism for removing CIP, while adsorption onto the sludge only contributed a small fraction, and an even smaller fraction was due to the waste sludge discharged. CIP was biodegraded to some degree in the AnMBR, with some intermediate compounds detected using LC-MS/MS and GC-MS. This work showed the effectiveness of an AnMBR in removing CIP at low concentrations of <1.5 mg/L, and hence may be an effective treatment for removing other antibiotics from wastewater.

Photolytic degradation of ciprofloxacin in solid and aqueous environments: kinetics, phototransformation pathways, and byproducts

Many lipophilic pharmaceuticals may be sorbed in solid phases, leading to different photochemical behaviors. This study investigated the photochemistry of ciprofloxacin in a solid-phase system and compared it to that in a water-phase system. Kaolinite was used as the model solid matrix. The photolysis of ciprofloxacin in kaolinite fits pseudo-first-order kinetics for thicknesses less than 199 μm, and the rate constants k _p decreased from 0.0154 to 0.0016 min^-1 as the thickness of the layer increased. Unlike the aqueous phase, two-step degradation processes were observed for all kaolinite layer thicknesses (14-199 μm), and the pseudo-first-order constant at the surface of the kaolinite layer was smaller than that in the water phase. Comparatively , a similar photolysis rate constant of ciprofloxacin in a kaolinite suspension was also observed, and it was an order of magnitude smaller than that of the direct photodegradation (0.035 min^-1) in water. The results indicate that ciprofloxacin is likely more stable when it is adsorbed on kaolinite and that the half-lives of ciprofloxacin in kaolinite and a kaolinite suspension are 2-25 times longer than that in deionized water (20 min) under simulated sunlight. Direct photolysis is proposed to be the main photodegradation mechanism for ciprofloxacin in kaolinite, and the cleavage of a piperazine ring is the main degradation pathway. However, the interaction between ciprofloxacin and kaolinite reduces the direct photolysis and leads to a higher light stability. In association with the reduction in photolysis, the yields of norfloxacin and defluorinated byproduct decreased significantly. Consequently, the interaction increases the persistence of ciprofloxacin and thus the ecological risk to the environment.

Assessing the presence of enrofloxacin and ciprofloxacin in piggery wastewater and their adsorption behaviour onto solid materials, with a newly developed chromatographic method

Veterinary antibiotics could enter the environment after the application of manure or farm wastewater on soil as fertilizer. In this study, a UPLC-MS/MS analytical method was developed and validated for the simultaneous determination of enrofloxacin (ENR) and ciprofloxacin (CIP) at environmental relevant concentrations in piggery wastewater, piggery wastewater solids, agricultural soil and ground water with good performance characteristics. The method recovery for ENR and CIP was 94.2 and 89.9% in the filtered piggery wastewater, 81.3 and 82% in the wastewater solid material, 78.1 and 76.8% in the soil and 95.6 and 97.3% in the ground water. The Limit of Detection (LOD) and Limit of Quantification (LOQ) for ENR were 21 and 64 ng L^-1 and for CIP was 18 and 54 ng L^-1, respectively. The method was implemented to monitor ENR and CIP in the wastewater of a piggery facility in Cyprus which applied anaerobic treatment before the final disposal of the reclaimed water. The highest antibiotic concentrations were measured in the wastewater samples collected from the nursery, where ENR is continuously used, with average concentration 31.4 μg L^-1 for ENR and 16.0 μg L^-1 for CIP. After the anaerobic digester, the two antibiotics were found only on the solid matter of the treated wastewater with an average concentration of 1.7 μg kg^-1 for ENR and 1.0 μg kg^-1 for CIP. The antibiotics adsorption at pH = 7 on clay soil, quartz sand and on solid matter isolated from the piggery wastewater was found to be higher than 95% for all solid materials. The concentration of the antibiotics in soil samples taken from a field where reclaimed piggery wastewater was applied for 10 years and in samples of groundwater from a nearby well was found for all samples below the LOD.

Dependence of transformation product formation on pH during photolytic and photocatalytic degradation of ciprofloxacin

Ciprofloxacin (CIP) is a broad-spectrum antibiotic with five pH dependent species in aqueous medium, which makes its degradation behavior difficult to predict. For the identification of transformation products and prediction of degradation mechanisms, a new experimental concept making use of isotopically labeled compounds together with high resolution mass spectrometry was successfully established. The utilization of deuterated ciprofloxacin (CIP-d8) facilitated the prediction of three different degradation pathways and the corresponding degradation products, four of which were identified for the first time. Moreover, two molecular structures of previously reported transformation products were revised according to the mass spectra and product ion spectra of the deuterated transformation products. Altogether, 18 transformation products have been identified during the photolytic and photocatalytic reactions at different pH values (3, 5, 7 and 9). In this work the influence of pH on both reaction kinetics and degradation mechanism was investigated for direct ultraviolet photolysis (UV-C irradiation) and photocatalysis (TiO2/UV-C). It could be shown that the removal rates strongly depended on pH with highest removal rates at pH 9. A comparison with those at pH 3 clearly indicated that under acidic conditions ciprofloxacin cannot be easily excited by UV irradiation. We could confirm that the first reaction step for both oxidative treatment processes is mainly defluorination, followed by degradation at the piperazine ring of CIP.

Occurrence and distribution of the environmental pollutant antibiotics in Gaoqiao mangrove area, China

Occurrence and distribution of 15 antibiotics belonging to families of sulfonamides, fluoroquinolones, tetracyclines and chloramphenicols were investigated in water and sediment in Gaoqiao mangrove area, China, using LC-MS-MS. The influence of tidal level and mangrove vegetation on antibiotic residues were examined. The levels of antibiotics were found to be ranged from 0.15 to 198 ng L(-1) in water and from 0.08 to 849 μg kg(-1) in sediment. No significant difference in concentrations of 15 different antibiotics from water and sediment samples was observed among the high, middle and low intertidal channel. The residues of SMZ, SMTZ, OFL, NOR, ENR, OXY and FLO were significantly higher in Aegiceras corniculatum assemblage than in Avicennia marina assemblage. Although no significant difference in tested antibiotics was found between the surface and bottom sediment, mangrove vegetation can to some extent reduce the accumulation for SMZ, SMTZ, OFL, NOR, CIP, OXY and TET in sediments relative to corresponding bare mudflats, implying that the environmental pollution from antibiotics may be mitigated by mangrove vegetation. Principal components analysis revealed that the terrestrial input and different habitats directly influenced the occurrence and distribution of antibiotics.

Kinetics and Mechanisms of Ciprofloxacin Oxidation on Hematite Surfaces

Adsorption of antibiotics at mineral surfaces has been extensively studied over the past 20 years, yet much remains to be learned on their interfacial properties and transformation mechanisms. In this study, interactions of Ciprofloxacin (CIP), a fluoroquinolone antibiotic with two sets of synthetic nanosized hematite particles, with relatively smooth (H10, 10-20 nm in diameter) and roughened (H80, 80-90 nm in diameter) surfaces, were studied by means of liquid chromatography (LC), mass spectrometry (MS), and spectroscopy (vibration and X-ray photoelectron). Attenuated Total Reflectance Fourier Transform Infrared (ATR-FTIR) spectroscopy provides evidence for inner-sphere bidentate complex formation of CIP at hematite surfaces in 0.01 M NaCl, irrespective of pH and particle size. ATR-FTIR spectroscopy also revealed that the sorbed mother CIP molecule decayed to other surface species over a period of at least 65 h. This was supported by the detection of three daughter products in the aqueous phase by LC/MS. The appearance of NH3(+) groups during the course of these experiments, revealed by cryogenic XPS, provides further evidence that CIP oxidation proceeds through an opening of piperazine ring via N-dealkylation. Additional in vacuo FTIR experiments under temperature-programmed desorption also showed that oxidation of sorbed byproducts were effectively degraded beyond 450 °C, a result denoting considerably strong (inter)molecular bonds of both mother and daughter products. This work also showed that rougher, possibly multidomainic particles (H80) generated slower rates of CIP decomposition but occurring through more complex schemes than at smoother particle surfaces (H10). This work thus uncovered key aspects of the binding of an important antibiotic at iron oxide surfaces, and therefore provided additional constraints to our growing understanding of the fate of emerging contaminants in the environment.

Transformation products of antibiotic and cytostatic drugs in the aquatic cycle that result from effluent treatment and abiotic/biotic reactions in the environment: an increasing challenge calling for higher emphasis on measures at the beginning of the pipe

Pharmaceuticals may undergo transformation into new products during almost all possible processes along their life-cycle. This could either take place in the natural water environment and/or during water treatment processes. Numerous studies that address the issue of such transformation products (TPs) have been published, describing selected aspects of TPs in the environment and their formation within effluent and water treatment processes. In order to exemplify the number and quality of information published on TPs, we selected 21 active pharmaceutical ingredients from the groups of antibiotics and antineoplastics, and assessed the knowledge about their TPs that has been published until the end of May 2012. The goal of this work was to demonstrate, that the quality of data on pharmaceutical TPs greatly differs in terms of the availability of chemical structures for each TP, rather than to provide an exhaustive database of available TPs. The aim was to point out the challenge going along with so many TPs formed under different treatment and environmental conditions. An extensive review in the form of a table showing the existing data on 158 TPs for 15 compounds, out of 21 investigated, was presented. Numerous TPs are the result of different treatments and environmental processes. However, also numerous different TPs may be formed within only one type of treatment, applied under sometimes even very similar treatment conditions and treatments times. In general, the growing number of elucidated TPs is rationalized by ineffective removal treatments. Our results demonstrate a severe risk of drowning in much unrelated and non-assessable data, both from a scientific and from a technical treatment-related point of view. Therefore, limiting the input of pharmaceuticals into effluents as well as improving their (bio) degradability and elimination behavior, instead of only relying on advanced effluent treatments, is urgently needed. Solutions that focus on this "beginning of the pipe" approach should minimize the adverse effects of parent compounds by reducing and formation of TPs and their entrance into the natural environment.

Second order advantage applied to the spectrophotometric analysis of ciprofloxacin and dexamethasone in ophthalmic drops; automatic green method using on-line photodegradation

On-line photodegradation and spectrophotometric analysis assisted by multivariate curve resolution-alternating least squares (MCR-ALS) was developed the simultaneous determination of ciprofloxacin (CIP) and dexamethasone (DEX) in ophthalmic suspensions using an automated flow-batch analysis (FBA) system. CIP and DEX have strongly overlapped UV spectra. Overcoming this lack of selectivity involves augmenting data dimensionality. This could be performed by adding information about the sample photodegradation to obtain the so-called second order advantage. Commercial sample analysis was successfully performed and no statistical differences (α = 0.05) with respect to pharmacopeia methods were obtained. The proposed method offers several advantages over the methods developed to date. In agreement with the principles of green chemistry, only water was used as solvent, low amounts of waste were generated and on-line waste treatment was included in the system. Moreover, the cost per analysis was significantly reduced compared to methods that employ separative techniques.

Environmental photochemistry of fluoroquinolones in soil and in aqueous soil suspensions under solar light

The photodegradation fate of widely used fluoroquinolone (FQ) drugs has been studied both at the water-soil interface and in soil at actual concentrations (500 ng g(-1)) under natural solar light. Both human and veterinary drugs have been examined, namely ciprofloxacin, danofloxacin, enrofloxacin, levofloxacin, marbofloxacin and moxifloxacin. After spiking and irradiation, samples were submitted to microwave-assisted extraction and analyzed by high-performance liquid chromatography coupled to fluorescence detection (HPLC-FD). FQs degradation was faster in aqueous soil suspension than in neat soil (but lower than in "clean" water). A number of byproducts were identified by HPLC electrospray ionization tandem mass spectrometry after a post-extraction cleanup based on a molecularly imprinted polymer phase, for a more accurate detection. The distribution in the suspension was intermediate between those observed in soils and in aqueous solutions.

Characterization of photo-transformation products of the antibiotic drug Ciprofloxacin with liquid chromatography-tandem mass spectrometry in combination with accurate mass determination using an LTQ-Orbitrap

The presence of pharmaceuticals, especially antibiotics, in the aquatic environment is of growing concern. Several studies have been carried out on the occurrence and environmental risk of these compounds. Ciprofloxacin (CIP), a broad-spectrum anti-microbial second-generation fluoroquinolone, is widely used in human and veterinary medicine. In this work, photo-degradation of CIP in aqueous solution using UV and xenon lamps was studied. The transformation products (TPs), created from CIP, were initially analyzed by an ion trap in the MS, MS/MS and MS(3) modes. These data were used to clarify the structures of the degradation products. Furthermore, the proposed products were confirmed by accurate mass measurement and empirical formula calculation for the molecular ions of TPs using LTQ-Orbitrap XL mass spectrometer. The degree of mineralization, the abundance of detected TPs and degradation pathways were determined. Eleven TPs were detected in the present study. TP1, which was never detected before, was structurally characterized in this work. All TPs still retained the core quinolone structure, which is responsible for the biological activity. As mineralization of CIP and its transformation products did not happen, the formation of stable TPs can be expected in waste water treatment and in surface water with further follow-up problems.

A critical assessment of the photodegradation of pharmaceuticals in aquatic environments: defining our current understanding and identifying knowledge gaps

This work presents a critical assessment of the state and quality of knowledge around the aquatic photochemistry of human- and veterinary-use pharmaceuticals from laboratory experiments and field observations. A standardized scoring rubric was used to assess relevant studies within four categories: experimental design, laboratory-based direct and indirect photolysis, and field/solar photolysis. Specific metrics for each category are defined to evaluate various aspects of experimental design (e.g., higher scores are given for more appropriate characterization of light source wavelength distribution). This weight of evidence-style approach allowed for identification of knowledge strengths and gaps covering three areas: first, the general extent of photochemical data for specific pharmaceuticals and classes; second, the overall quality of existing data (i.e., strong versus weak); and finally, trends in the photochemistry research around these specific compounds, e.g. the observation of specific and consistent oversights in experimental design. In general, those drugs that were most studied also had relatively good quality data. The four pharmaceuticals studied experimentally at least ten times in the literature had average total scores (lab and field combined) of ≥29, considered decent quality; carbamazepine (13 studies; average score of 31), diclofenac (12 studies; average score of 31), sulfamethoxazole (11 studies; average score of 34), and propranolol (11 studies; average score of 29). Major oversights and errors in data reporting and/or experimental design included: lack of measurement and reporting of incident light source intensity, lack of appropriate controls, use of organic co-solvents in irradiation solutions, and failure to consider solution pH. Consequently, a number of these experimental parameters were likely a cause of inconsistent measurements of direct photolysis rate constants and quantum yields, two photochemical properties that were highly variable in the literature. Overall, the assessment rubric provides an objective and scientifically-defensible set of metrics for assessing the quality of a study. A major recommendation is the development of a method guideline, based on this rubric, for conducting and reporting on photochemical studies that would produce consistent and reliable data for quantitative comparison across studies. Furthermore, an emphasis should be placed on conducting more dual-fate studies involving controlled photolysis experiments in natural sunlight, and whole system fate studies in either natural or artificial systems. This would provide accurate data describing the actual contribution of photolysis to the overall fate of pharmaceuticals in the environment.

Photo-transformation of pharmaceutically active compounds in the aqueous environment: a review

In the past few years, the fate and transportation of pharmaceutically active compounds (PhACs) in aqueous environments have raised significant concerns among the public, scientists and regulatory groups. Photodegradation is an important removal process in surface waters. This review summarizes the last 10 years (2003-2013) of studies on the solar or solar-simulated photodegradation of PhACs in aqueous environments. The PhACs covered include: beta-blockers, antibiotics, non-steroidal anti-inflammatory drugs (NSAIDs), histamine H₂-receptor antagonists, lipid regulators, carbamazepine, steroid hormones, and X-ray contrast media compounds. Kinetic studies, degradation mechanisms and toxicity removal are the three major topics involved in this review. The quantum yield for the direct photolysis of PhACs and the bimolecular reaction rate constants of PhACs with reactive oxygen species (ROS), such as the ˙OH radical and singlet oxygen, are also summarized. This information is not only important to predict the PhAC photodegradation fate, but also is very useful for advanced treatment technologies, such as ozone or advanced oxidation processes.

Identification of metabolites and thermal transformation products of quinolones in raw cow's milk by liquid chromatography coupled to high-resolution mass spectrometry

The presence of residues of antibiotics, metabolites, and thermal transformation products (TPs), produced during thermal treatment to eliminate pathogenic microorganisms in milk, could represent a risk for people. Cow's milk samples spiked with enrofloxacin (ENR), ciprofloxacin (CIP), difloxacin (DIF), and sarafloxacin (SAR) and milk samples from cows medicated with ENR were submitted to several thermal treatments. The milk samples were analyzed by liquid chromatography-mass spectrometry (LC-MS) to find and identify TPs and metabolites. In this work, 27 TPs of 4 quinolones and 24 metabolites of ENR were found. Some of these compounds had been reported previously, but others were characterized for the first time, including lactose-conjugated CIP, the formamidation reaction for CIP and SAR, and hydroxylation or ketone formation to produce three different isomers for all quinolones studied.

The distribution and partitioning of common antibiotics in water and sediment of the Pearl River Estuary, South China

Antibiotics released into the aquatic environment play an important role in the spread of antibiotic resistance. In the Pearl River Estuary (PRE) and the coastal zone, the concentrations of antibiotics decreased from the Pearl River to the estuary, suggesting that antibiotics primarily originated from river tributaries and terrigenous sources. Within the PRE area, the concentrations of antibiotics in water were higher in the west coast than the east side, reflecting the high density of anthropogenic activities and hydraulic conditions along the west riverbank. Seasonal variations were also observed for most of detected antibiotics in water. The pseudo-partitioning coefficient of norfloxacin had a good correlation with the TOC content of sediments, as did erythromycin-H2O with the pH of water. The results suggest that environmental conditions can significantly affect the distribution of antibiotics between water and sediment.

Photolytic degradation of norfloxacin, enrofloxacin and ciprofloxacin in various aqueous media

The photolytic degradation of norfloxacin, enrofloxacin and ciprofloxacin, fluoroquinolone antibacterials widely used in human and veterinary medicine, was investigated under simulated solar irradiation in different water matrices (river water and synthetic wastewater similar by composition to wastewater of pharmaceutical industry). The results showed that investigated fluoroquinolones degrade very quickly and photodegradation followed pseudo first order kinetics. The slowest photodegradation rate was observed in river water for all three fluoroquinolones. In the case of pharmaceutical mixture irradiation, no significant differences in rate constants were observed compared to single-component experiments. The structures of photodegradation products were determined and photodegradation pathways were suggested. Two main processes occurred primary from enrofloxacin depending on pH values: (I) cyclopropane ring cleavage at pH 4 and (II) oxidative photodegradation at pH 8. The structures of the photoproducts E-1 to E-6 are unknown and have not been reported for this fluoroquinolone. For ciprofloxacin two main processes were also identified depending on experimental conditions. Under acidic conditions (pH 4), reactions involved rather the quinolone ring (cleavage of the cyclopropane ring and fluorine solvolysis), while at pH 8 the side-chain reactions took place. The photodegradation pathway of norfloxacin somewhat differed from the previous two. There was no significant dependence on reaction conditions and there were no two different pathways. Determination and identification of photodegradation products were performed by liquid chromatography-mass spectrometry (LC-MS/MS). The obtained results are of importance for assessing the environmental fate of fluoroquinolones in aqueous media.

Hybrid hard- and soft-modeling of spectrophotometric data for monitoring of ciprofloxacin and its main photodegradation products at different pH values

A simple and fast on line spectrophotometric method combined with a hybrid hard-soft modeling multivariate curve resolution (HS-MCR) was proposed for the monitoring of photodegradation reaction of ciprofloxacin under UV radiation. The studied conditions attempt to emulate the effect of sunlight on these antibiotics that could be eventually present in the environment. The continuous flow system made it possible to study the ciprofloxacin degradation at different pH values almost at real time, avoiding errors that could arise from typical batch monitoring of the reaction. On the base of a concentration profiles obtained by previous pure soft-modeling approach, reaction pathways have been proposed for the parent compound and its photoproducts at different pH values. These kinetic models were used as a constraint in the HS-MCR analysis. The kinetic profiles and the corresponding pure response profile (UV-Vis spectra) of ciprofloxacin and its main degradation products were recovered after the application of HS-MCR analysis to the spectra recorded throughout the reaction. The observed behavior showed a good agreement with the photodegradation studies reported in the bibliography. Accordingly, the photodegradation reaction was studied by high performance liquid chromatography coupled with UV-Vis diode array detector (HPLC-DAD). The spectra recorded during the chromatographic analysis present a good correlation with the ones recovered by UV-Vis/HS-MCR method.

Photochemical degradation of marbofloxacin and enrofloxacin in natural waters

The photochemical fate of Marbofloxacin (MAR) and Enrofloxacin (ENR), two Fluoroquinolones (FQs) largely used as veterinary bactericides known to be present in surface waters, was investigated in aqueous solution. The degradation of these pollutants (5-50 microg L(-1) starting concentration) was complete in about 1 h by exposure to solar light (summer) and obeyed a first-order kinetics. The structure of the primary photoproducts was determined. Those from ENR arose through three paths, namely, oxidative degradation of the piperazine side-chain, reductive defluorination, and fluorine solvolysis. More heavily degraded products that had been previously reported were rationalized as secondary photoproducts from the present ones. As for MAR, this underwent homolytic cleavage of the tetrahydrooxadiazine moiety to give two quinolinols. All of the primary products were themselves degraded in about 1 h. The photoreactions rates were scarcely affected by Ca(2+) (200 mg L(-1)), Mg(2+) (30 mg L(-1)), Cl(-) (30 mg L(-1)), and humic acid (1 mg L(-1)), but increased in the presence of phosphate (20 mg L(-1)). The fastest degradation of ENR occurred at pH about 8 where the zwitterionic form was present, while in the case of MAR the cationic form was the most reactive.

Inhibition of photosynthesis by a fluoroquinolone antibiotic

Recent microcosm studies have revealed that fluoroquinolone (FQ) antibiotics can have ecotoxicological impacts on photosynthetic organisms, but little is known about the mechanisms of toxicity. We employed a combination of modeling and experimental techniques to explore how FQs may have these unintended secondary toxic effects. Structure-activity analysis revealed that the quinolone ring and secondary amino group typically present in FQ antibiotics may mediate their action as quinone site inhibitors in photosystem II (PS-II), a key enzyme in photosynthetic electron transport. Follow-up molecular simulations involving nalidixic acid (Naldx), a nonfluorinated quinolone with a demonstrated adverse impact on photosynthesis, and ciprofloxacin (Cipro), the most commonly used FQ antibiotic, showed that both may interfere stereochemically with the catalytic activity of reaction center II (RC-II), the pheophytin-quinone-type center present in PS-II. Naldx can occupy the same binding site as the secondary quinone acceptor (Q(B)) in RC-II and interact with amino acid residues required for the enzymatic reduction of Q(B). Cipro binds in a somewhat different manner, suggesting a different mechanism of interference. Fluorescence induction kinetics, a common method of screening for PS-II inhibition, recorded for photoexcited thylakoid membranes isolated from Cipro-exposed spinach chloroplasts, indicated that Cipro interferes with the transfer of energy from excited antenna chlorophyll molecules to the reaction center in RC-II ([Cipro] >or= 5 microM in vitro and >or=10 microM in vivo) and thus delays the kinetics of photoreduction of the primary quinone acceptor (Q(A); [Cipro] >or= 0.6 microM in vitro). Spinach plants exposed to Cipro exhibited severe growth inhibition characterized by a decrease in both the synthesis of leaves and growth of the roots ([Cipro] >or= 0.5 microM in vivo). Our results thus demonstrate that Cipro and related FQ antibiotics may interfere with photosynthetic pathways, in addition to causing morphological deformities in higher plants.

Environmental pollution by antibiotics and by antibiotic resistance determinants

Antibiotics are among the most successful drugs used for human therapy. However, since they can challenge microbial populations, they must be considered as important pollutants as well. Besides being used for human therapy, antibiotics are extensively used for animal farming and for agricultural purposes. Residues from human environments and from farms may contain antibiotics and antibiotic resistance genes that can contaminate natural environments. The clearest consequence of antibiotic release in natural environments is the selection of resistant bacteria. The same resistance genes found at clinical settings are currently disseminated among pristine ecosystems without any record of antibiotic contamination. Nevertheless, the effect of antibiotics on the biosphere is wider than this and can impact the structure and activity of environmental microbiota. Along the article, we review the impact that pollution by antibiotics or by antibiotic resistance genes may have for both human health and for the evolution of environmental microbial populations.

Antibiotics in the aquatic environment--a review--part I

Although antibiotics have been used in large quantities for some decades, until recently the existence of these substances in the environment has received little notice. It is only in recent years that a more complex investigation of antibiotic substances has been undertaken in order to permit an assessment of the environmental risks they may pose. Within the last decade an increasing number of studies covering antibiotic input, occurrence, fate and effects have been published, but there is still a lack of understanding and knowledge about antibiotics in the aquatic environment despite the numerous studies performed. This review addresses the present state of knowledge concerning the input, occurrence, fate and effects of antibiotics in the environment. It brings up important questions that are still open, and addresses some significant issues which must be tackled in the future for a better understanding of the behavior of antibiotics in the environment, as well as the risks associated with their occurrence. Questions related to resistance in the environment that may be caused by antibiotics will be addressed in the second part.

Two-dimensional difference gel electrophoresis analysis of Streptococcus uberis in response to mutagenesis-inducing ciprofloxacin challenge

In Streptococcus uberis, the fluoroquinolone antibiotic ciprofloxacin induces a mutagenic response that is distinct from the SOS paradigm. Two-dimensional differential gel electrophoresis was employed to investigate the effect of ciprofloxacin exposure on the proteome of S. uberis. Twenty-four protein spots exhibiting differential expression (p < 0.05) were identified as enzymes with potential role in oxidative stress, NADH generation and nucleotide biosynthesis. We suggest that these metabolic changes provide S. uberis means to stimulate mutagenesis and adaptation.

Occurrence and fate of antibiotics in the Seine River in various hydrological conditions

Occurrence and fate of 17 antibiotics were investigated in the aqueous phase of river water under different hydrological conditions at 5 sampling locations in the Seine River inner estuary. The target analytes belonged to 4 groups: quinolones, sulfonamides, nitro-imidazoles and diaminopyrimidines. This six-month survey (from January to June 2006) showed that different compounds were occurring at individual concentrations reaching 544 ng L(-)(1) (sulfamethoxazole). All 17 compounds were detected at least once in the survey. Sulfamethoxazole was detected in every sample, and showed the highest concentrations. Norfloxacin and flumequine were found to be the most ubiquitous quinolones, with detection frequencies of 33 and 75% respectively at the most contaminated site (Poses). Investigations concerning the origins of this contamination were made by means of a longitudinal profile along the Seine River between Paris and Poses. It showed large inputs of norfloxacin, ofloxacin, trimethoprim and sulfamethoxazole from wastewater treatment plants, with an increase in norfloxacin and sulfamethoxazole concentrations of 84% and 70% respectively, both reaching 155 ng L(-)(1) in the river, downstream from a wastewater outlet. The detected compounds showed different dissipation patterns and behaviours under different hydrological conditions. Higher inputs of norfloxacin were found in low flow conditions, which were rapidly attenuated along the stream. In contrast, sulfamethoxazole inputs were increasing in high flow conditions, and dissipation of this compound was found to be slow. Similar behaviour was observed for the synergist trimethoprim. Flumequine was also frequently detected and its input increased during flood events.