A photochemically initiated chemistry for coupling underivatized carbohydrates to gold nanoparticles

Trehalose-Grafted Glycopolymer: Synthesis via the Staudinger Reaction and Capture of Mycobacteria

A new trehalose-grafted poly(2-hydroxyethyl methacrylate) (HEMA) glycopolymer was synthesized via the perfluorophenyl azide (PFPA)-mediated Staudinger reaction between poly(HEMA-co-HEMA-PFPA) and a diphenylphosphine-derivatized trehalose. The reaction occurred rapidly at room temperature without the use of any catalyst, giving the trehalose glycopolymers over 68% yield after 1 h. The grafting density of trehalose can be controlled by the copolymer composition in poly(HEMA-co-HEMA-PFPA), resulting in 6.1% (TP1) or 37% (TP2) at 10:1 and 1:1 HEMA/HEMA-PFPA feed ratio, respectively. The trehalose glycopolymer was covalently attached on glass slides or silicon wafers using a thin film of poly(HEMA-co-HEMA-PFPA) as the adhesion layer, achieved through the C-H insertion reaction of the photogenerated singlet perfluorophenyl nitrene. To demonstrate the ability of the trehalose glycopolymer to capture mycobacteria, arrays of the trehalose glycopolymer were fabricated and treated with Mycobacterium smegmatis. Results from the optical, fluorescence, and scanning electron microscopy showed that mycobacteria were indeed captured on the trehalose glycopolymer. The amount of mycobacteria captured increased with the percent trehalose in the trehalose glycopolymer and also with the concentration of the trehalose glycopolymer. In addition, the captured bacteria could be visualized by the naked eye under the illumination of a hand-held UV lamp.

Polymer-tethered glyconanoparticle colourimetric biosensors for lectin binding: structural and experimental parameters to ensure a robust output

Glycan-lectin interactions play essential roles in biology; as the site of attachment for pathogens, cell-cell communication, and as crucial players in the immune system. Identifying if a new glycan (natural or unnatural) binds a protein partner, or if a new protein (or mutant) binds a glycan remains a non-trivial problem, with few accessible or low-cost tools available. Micro-arrays allow for the interrogation of 100's of glycans but are not widely available in individual laboratories. Biophysical techniques such as isothermal titration calorimetry, surface plasmon resonance spectrometry, biolayer interferometry and nuclear magnetic resonance spectroscopy all provide detailed understanding of glycan binding but are relatively expensive. Glycosylated plasmonic nanoparticles based on gold cores with polymeric tethers have emerged as biosensors to detect glycan-protein binding, based on colourimetric (red to blue) outputs which can be easily interpreted by a simple UV-visible spectrometer or by eye. Despite the large number of reports there are no standard protocols for each system or recommended start points, to allow a new user to deploy this technology. Here we explore the key parameters of nanoparticle size, polymeric tether length and gold concentration to provide some guidelines for how polymer-tethered glycosylated gold nanoparticles can be used to probe a new glycan/protein interactions, with minimal optimisation barriers. This work aimed to remove the need to explore chemical and nanoparticle space and hence remove a barrier for other users when deploying this system. We show that the concentration of the gold core is crucial to balance strong responses versus false positives and recommend a gold core size and polymer tether length which balances sufficient colloidal stability and output. Whilst subtle differences between glycans/lectins will impact the outcomes, these parameters should enable a lab user to quickly evaluate binding using minimal quantities of the glycan and lectin, to select candidates for further study.

Trehalose-Modified Silver Nanoparticles as Antibacterial Agents with Reduced Cytotoxicity and Enhanced Uptake by Mycobacteria

Silver nanoparticles (AgNPs) are potent antimicrobial agents, but their utility is limited due to their relatively high cytotoxicity. In this work, we used trehalose as the ligand to reduce the cytotoxicity of AgNPs without affecting their antimicrobial activities. Trehalose is a disaccharide that is unique to mycobacteria. We showed that trehalose-functionalized AgNPs, AgNP-Tre, drastically increased the viability of A549 cells, especially at high concentrations, for example, from 4% for AgNPs to 67% for AgNP-Tre at 64 μg/mL. The trehalose ligand slowed down the release of silver, and the amount of silver released from AgNP-Tre was less than half of that from AgNPs in the culture medium. Intriguingly, while the maltose (Mal) or tri(ethylene glycol) (TEG) ligand reduced the antibacterial activity of AgNPs against M. smegmatis (minimal inhibitory concentration (MIC) of AgNP-Mal and AgNP-TEG: 4 μg/mL for 7 nm AgNPs), the activity of AgNP-Tre was similar to that of AgNPs (MIC of AgNP-Tre: 1 μg/mL for 7 nm AgNPs). Uptake experiments revealed that the intracellular concentration of AgNP-Tre was 87 and 114% higher than those of AuNP-Mal and AgNP-TEG, respectively. The increased uptake was attributed to the enhanced interactions of AgNP-Tre with mycobacteria promoted by the trehalose ligand.

Selective treatment of intracellular bacterial infections using host cell-targeted bioorthogonal nanozymes

Intracellular bacterial infections are difficult to treat, and in the case of Salmonella and related infections, can be life threatening. Antibiotic treatments for intracellular infections face challenges including cell penetration and intracellular degradation that both reduce antibiotic efficacy. Even when treatable, the increased dose of antibiotics required to counter infections can strongly impact the microbiome, compromising the native roles of beneficial non-pathogenic species. Bioorthogonal catalysis provides a new tool to combat intracellular infections. Catalysts embedded in the monolayers of gold nanoparticles (nanozymes) bioorthogonally convert inert antibiotic prodrugs (pro-antibiotics) into active species within resident macrophages. Targeted nanozyme delivery to macrophages was achieved through mannose conjugation and subsequent uptake VIA the mannose receptor (CD206). These nanozymes efficiently converted pro-ciprofloxacin to ciprofloxacin inside the macrophages, selectively killing pathogenic Salmonella enterica subsp. enterica serovar Typhimurium relative to non-pathogenic Lactobacillus sp. in a transwell co-culture model. Overall, this targeted bioorthogonal nanozyme strategy presents an effective treatment for intracellular infections, including typhoid and tuberculosis.

Toward Glycomaterials with Selectivity as Well as Affinity

Multivalent glycosylated materials (polymers, surfaces, and particles) often show high affinity toward carbohydrate binding proteins (e.g., lectins) due to the nonlinear enhancement from the cluster glycoside effect. This affinity gain has potential in applications from diagnostics, biosensors, and targeted delivery to anti-infectives and in an understanding of basic glycobiology. This perspective highlights the question of selectivity, which is less often addressed due to the reductionist nature of glycomaterials and the promiscuity of many lectins. The use of macromolecular features, including architecture, heterogeneous ligand display, and the installation of non-natural glycans, to address this challenge is discussed, and examples of selectivity gains are given.

Maltoheptaose-Presenting Nanoscale Glycoliposomes for the Delivery of Rifampicin to E. coli

Liposomes, a nanoscale drug delivery system, are well known for their ability to improve pharmacokinetics and reduce drug toxicity. In this work, maltoheptaose (G7)-presenting glycoliposomes were synthesized and evaluated in the delivery of the antibiotic rifampicin. Two types of liposomes were prepared: nonfluid liposomes from l-α-phosphatidylcholine (PC) and cholesterol, and fluid liposomes from 1,2-dipalmitoyl-sn-glycero-3-phosphocholine and 1,2-dimyristoyl-sn-glycero-3-phospho-(1'-rac-glycerol). G7-derivatized glycolipid, G7-DPPE (DPPE: 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine), was incorporated into the liposomes at 21 and 14 μmol/mg to form nanoparticles of 75 ± 12 and 146 ± 14 nm for the nonfluid and fluid G7-glycoliposomes, respectively. The multivalent G7-glycoliposomes were characterized by lectin binding with concanavalin A (Con A). The dissociation constant K _d between Con A and the nonfluid or fluid G7-glycoliposomes was 0.93 or 0.51 μM, which represented ~900- or 1600-fold stronger affinity than the binding between Con A and G7. The G7-glycoliposomes were loaded with rifampicin at 6.6 and 16 wt % encapsulation for the nonfluid and fluid G7-glycoliposomes, respectively. Introducing a carbohydrate in the liposomes slowed down the release of rifampicin, with the G7-glycoliposomes having the slowest release rate and the lowest permeability coefficient among the liposome formulations. The fluid G7-glycoliposomes lowered the minimal inhibitory concentration (MIC) of rifampicin against E. coli ORN208 by about 3 times, whereas liposomes without G7 or Man (d-mannose)-glycoliposomes showed no improvement in MIC. The rifampicin-loaded fluid G7-glycoliposomes demonstrated the best sustained antibacterial activity against E. coli, with up to 2 log reduction in the colony forming units at 4 × MIC after 24 h. Fluorescence resonance energy transfer and confocal fluorescence microscopy revealed stronger interactions of the bacterium with the fluid G7-glycoliposomes than other liposome formulations.

Dietary Fiber-Tethered Gold Nanoparticles: An Innovative Analytical Tool for Probing Interactions

Epidemiological studies have recognized that daily consumption of dietary fiber-containing foods reduces the incidence of developing many chronic diseases, for example, by interacting with nutritionally relevant compounds. The low affinity nature that some of these interactions can have make the development of an analytical detection system for their study particularly difficult. Therefore, the mechanism of action of binding compounds, by which a dietary fiber exerts its potential health benefits, remains largely unknown. Here, a novel method based on glyco-nanotechnology is proposed for studying the interaction between galactomannan and target molecules. Starting from a bottom-up approach, gold nanoparticles and thiolated galactomannans of two different sizes were synthesized separately, and then mixed for auto-assembly of the two glyconanoparticle materials. In addition, a preliminary interaction study between the prepared glyconanoparticles and Concanavalin A was carried out using transmission electron microscopy (TEM) from which it could be deduced that the molecular weight and ligand density on the gold core play an important role in the interaction. Therefore, dietary fiber-tethered gold nanoparticles are a valuable tool to elucidate key parameters underlying dietary fiber interactions.

A glycoconjugate-based gold nanoparticle approach for the targeted treatment of Pseudomonas aeruginosa biofilms

In this study, "core-shell" gold nanoparticles (AuNPs) have been functionalised using a simple one-pot approach to form fucose-based glycoconjugate AuNPs (Fuc-AuNPs) and galactose-based glycoconjugate AuNPs (Gal-AuNPs), respectively. Owing to the selective carbohydrate-based recognition of the key virulence factors of P. aeruginosa, LecB (fucose-specific lectin)/LecA (galactose-specific lectin), Fuc-AuNPs and Gal-AuNPs-based imaging and therapeutic strategies were evaluated towards P. aeruginosa. Both Fuc-AuNPs and Gal-AuNPs were non-covalently loaded with the fluorophore dicyanomethylene 4H-pyran (DCM) to afford two highly selective fluorescence imaging agents for the visualisation of P. aeruginosa. The loading of Fuc-AuNPs and Gal-AuNPs with the known antibiotic Ceftazidime (CAZ) exhibited an enhanced therapeutic effect, illustrating the significance of this targeted drug delivery strategy. Exploiting the phototherapeutic properties of AuNPs, photoirradiation (600 nm) of Fuc-AuNP@CAZ/Gal-AuNP@CAZ provided both photothermal and photodynamic therapeutic (PTT/PDT) effects, which facilitated the release of CAZ. Fuc-AuNP@CAZ and Gal-AuNP@CAZ were shown to be effective photo/chemotherapeutics resulting in almost complete eradication of P. aeruginosa biofilms formed on clinically relevant surfaces (glass slides and steel surface).

Quantification of binding affinity of glyconanomaterials with lectins

Carbohydrate-mediated interactions are involved in many cellular activities including immune responses and infections. These interactions are relatively weak, and as such, cells employ multivalency, i.e., the presentation of multiple monovalent carbohydrate ligands within a close proximity, for cooperative binding thus drastically enhanced binding affinity. In the past two decades, the field of glyconanomaterials has emerged where nanomaterials are used as multivalent scaffolds to present multiple copies of carbohydrate ligands on the nanomaterial surface. At the core of glyconanomaterial research is the ability to control and modulate multivalency through ligand display. For the quantitative evaluation of multivalency, the binding affinity must be determined. Quantification of the binding parameters provides insights for not only the fundamental glyconanomaterial-lectin interactions, but also the rational design of effective diagnostics and therapeutics. Several methods have been developed to determine the binding affinity of glyconanomaterials with lectins, including fluorescence competitive assays in solution or on microarrays, Förster resonance energy transfer, fluorescence quenching, isothermal titration calorimetry, surface plasmon resonance spectroscopy, quartz crystal microbalance and dynamic light scattering. This Feature Article discusses each of these techniques, as well as how each technique is applied to determine the binding affinity of glyconanomaterials with lectins, and the data analysis. Although the results differed depending on the specific method used, collectively, they showed that nanomaterials as multivalent scaffolds could amplify the binding affinity of carbohydrate-lectin interactions by several orders of magnitude, the extent of which depending on the structure of the carbohydrate ligand, the ligand density, the linker length and the particle size.

A Universal Photochemical Method to Prepare Carbohydrate Sensors Based on Perfluorophenylazide Modified Polydopamine for Study of Carbohydrate-Lectin Interactions by QCM Biosensor

A universal photochemical method to prepare carbohydrate sensors based on perfluorophenylazide (PFPA) modified polydopamine (PDA) for the study of carbohydrate–lectin interactions by a quartz crystal microbalance (QCM) biosensor was developed. The PFPA was immobilized on PDA-coated gold sensors via Schiff base reactions. Upon light irradiation, the underivatized carbohydrates were inserted into the sensor surface, including mannose, galactose, fucose and N-acetylglucosamine (GlcNAc). Carbohydrate sensors were evaluated for the binding to a series of plant lectins. A kinetic study of the interactions between mannose and concanavalin A (Con A), fucose and Ulex europaeus agglutinin I (UEA-I) were performed. This method can eliminate the tedious modification of carbohydrates, improve the experimental efficiency, and reduce the experimental cost, which is of great significance for the development of QCM biosensors and the study of biomolecular interactions.

Complex-type N-glycans on VSV-G pseudotyped HIV exhibit 'tough' sialic and 'brittle' mannose self-adhesions

The complex-type glycan shields of eukaryotic cells have a core layer of mannose residues buried under tiers of sugars that end with sialic acid (SA) residues. We investigate if the self-latching of mannose residues, earlier reported in pure monolayer studies, also manifests in the setting of a complex-type glycan shield. Would distal SA residues impede access to the mannose core? The interactions of mannobiose-, SA-, and lactose-coated probes with the complex-type VSV-G glycan shield on an HIV pseudovirus were studied with force-spectroscopy and gold-nanoparticle solutions. In force spectroscopy, the sugar probes can be forced to sample the depths of the glycan shield, whereas with sugar-coated nanoparticles, only interactions permitted by freely-diffusive contact occur. Deep-indentation mechanics was performed to verify the inferred structure of the engineered virus and to isolate the glycan shield layer for subsequent interaction studies. The adhesion between the sugar-probes and complex-type glycan shield was deconvoluted by comparing against the cross- and self- adhesions between the sugars in pure monolayers. Results from complementing systems were consistent with mannobiose-coated probes latching to the mannose core in the glycan shield, unhindered by the SA and distal sugars, with a short-range 'brittle' release of adhesion resulting in tightly coated viruses. SA-Coated probes, however, adhere to the terminal SA layer of a glycan shield with long-range and mechanically 'tough' adhesions resulting in large-scale virus aggregation. Lactose-coated probes exhibit ill-defined adherence to sialic residues. The selection and positioning of sugars within a glycan shield can influence how carbohydrate surfaces of different composition adhere.

A New Approach for Glyco-Functionalization of Collagen-Based Biomaterials

The cell microenvironment plays a pivotal role in mediating cell adhesion, survival, and proliferation in physiological and pathological states. The relevance of extracellular matrix (ECM) proteins in cell fate control is an important issue to take into consideration for both tissue engineering and cell biology studies. The glycosylation of ECM proteins remains, however, largely unexplored. In order to investigate the physio-pathological effects of differential ECM glycosylation, the design of affordable chemoselective methods for ECM components glycosylation is desirable. We will describe a new chemoselective glycosylation approach exploitable in aqueous media and on non-protected substrates, allowing rapid access to glyco-functionalized biomaterials.

Immobilization of glycans on solid surfaces for application in glycomics

Carbohydrates are an important class of biomolecules which are involved in a multitude of cellular functions. In the field of glycomics, the structure and function of various carbohydrates, oligosaccharides, glycans and their conjugates are constantly under investigation. In the continuing quest to understand the roles of carbohydrates in their interactions with proteins, immunogens, and other cell-surface carbohydrates, scientists have developed methods for observing the effects of specific saccharide sequences on various cellular components. Carbohydrate immobilization has allowed researchers to study the impact of specific sequences, leading to a deeper understanding of many cellular processes. The goal of this review is to highlight the chemical reactions and interactions that have been used for glycan immobilization.

Development of an electrophoretic method based on nanostructured materials for HbA1c determination

Glycosylated hemoglobin (HbA1c) detection is performed routinely in hospitals as it is the most widespread confirmatory diagnosis of diabetes mellitus. Here we present a novel CE method for measuring HbA1c by introducing silica nanoparticles (NPs) modified with a boronic acid derivative (sugar loadings of 51 ± 2 μg/mg) as pseudo-stationary phase. Before the sample injection, SiO₂ NP─B(OH)₂ were introduced via pressure. Electrophoretic separation was explored through variation of the buffer pH and separation voltage, being the best separation, resolution and shorter separation time achieved with a 25 mM phosphate buffer pH 6.5. The calibration curve obtained was expressed as Area = 182.05%^-1 × HbA1c - 377.02; R²  = 0.9826, using a UV/VIS absorbance detector at 415 nm (diode array). No interferences were observed from carbamylated or acetylated hemoglobin and the method shows a noteworthy stability. A paired t-test was applied to compare the developed CE method with a commercial HbA1c test and no significant variations have been observed at a 90% significance level.

Recent applications of click chemistry for the functionalization of gold nanoparticles and their conversion to glyco-gold nanoparticles

Glycoscience, despite its myriad of challenges, promises to unravel the causes of, potential new detection methods for, and novel therapeutic strategies against, many disease states. In the last two decades, glyco-gold nanoparticles have emerged as one of several potential new tools for glycoscientists. Glyco-gold nanoparticles consist of the unique structural combination of a gold nanoparticle core and an outer-shell comprising multivalent presentation of carbohydrates. The combination of the distinctive physicochemical properties of the gold core and the biological function/activity of the carbohydrates makes glyco-gold nanoparticles a valuable tool in glycoscience. In this review we present recent advances made in the use of one type of click chemistry, namely the azide-alkyne Huisgen cycloaddition, for the functionalization of gold nanoparticles and their conversion to glyco-gold nanoparticles.

Mannose Surfaces Exhibit Self-Latching, Water Structuring, and Resilience to Chaotropes: Implications for Pathogen Virulence

Several viral and fungal pathogens, including HIV, SARS, Dengue, Ebola, and Cryptococcus neoformans, display a preponderance of mannose residues on their surface, particularly during the infection cycle or in harsh environments. The innate immune system, on the other hand, abounds in mannose receptors which recognize mannose residues on pathogens and trigger their phagocytosis. We pose the question if there is an advantage for pathogens to display mannose on their surface, despite these residues being recognized by the immune system. The surface properties and interactions of opposing monolayers of mannobiose (disaccharide of mannose) were probed using atomic force spectroscopy. Unlike its diastereoisomer lactose, mannobiose molecules exhibited lateral packing interactions that manifest on the surface scale as a self-recognizing latch. A break-in force is required for opposing surfaces to penetrate and a breakout (or self-adhesion force) of similar magnitude is required for penetrated surfaces to separate. A hierarchy of self-adhesion forces was distinguished as occurring at the single residue (∼25 pN), cluster (∼250 pN), monolayer (∼1.1 nN), and supramonolayer level. The break-in force and break-out force appear resilient to the presence of simple chaotropes that attenuate a layer of structured water around the mannose surface. The layer of structured water otherwise extends to distances several times longer than a mannobiose residue, indicating a long-range propagation of the hydrogen bonding imposed by the residues. The span of the structured water increases with the velocity of an approaching surface, similar to shear thickening, but fissures at higher approach velocities. Our studies suggest that mannose residues could guide interpathogen interactions, such as in biofilms, and serve as a moated fortress for pathogens to hide behind to resist detection and harsh environments.

Glycan heterogeneity on gold nanoparticles increases lectin discrimination capacity in label-free multiplexed bioassays

The development of new analytical tools as point-of-care biosensors is crucial to combat the spread of infectious diseases, especially in the context of drug-resistant organisms, or to detect biological warfare agents. Glycan/lectin interactions drive a wide range of recognition and signal transduction processes within nature and are often the first site of adhesion/recognition during infection making them appealing targets for biosensors. Glycosylated gold nanoparticles have been developed that change colour from red to blue upon interaction with carbohydrate-binding proteins and may find use as biosensors, but are limited by the inherent promiscuity of some of these interactions. Here we mimic the natural heterogeneity of cell-surface glycans by displaying mixed monolayers of glycans on the surface of gold nanoparticles. These are then used in a multiplexed, label-free bioassay to create 'barcodes' which describe the lectin based on its binding profile. The increased information content encoded by using complex mixtures of a few sugars, rather than increased numbers of different sugars makes this approach both scalable and accessible. These nanoparticles show increased lectin identification power at a range of lectin concentrations, relative to single-channel sensors. It was also found that some information about the concentration of the lectins can be extracted, all from just a simple colour change, taking this technology closer to being a realistic biosensor.

Dynamics of intramolecular spin exchange interaction of a nitronyl nitroxide diradical in solution and on surfaces

In this paper we report the study of the dynamics of a thermally modulated intramolecular spin exchange interaction of a novel diradical nitronyl nitroxide-substituted disulfide in solution and when it is grafted on a gold surface. The structure of this diradical was designed to have flexible chains leading to intramolecular collisions and hence spin exchange interaction, and with an appropriate binding group to be grafted on the gold surface to study its behavior on the surface. In solution, this diradical shows a strong spin exchange interaction between both radicals which is modulated by temperature, but also gold nanoparticles (AuNPs) functionalized with this diradical permit investigation of such a phenomenon in surface-grafted radicals. The spin-labelled AuNP synthesis was optimized to obtain high coverage of spin labels to lead to high spin exchange interaction. The obtained AuNPs were studied by Electron Paramagnetic Resonance (EPR), UV-Vis, and IR spectroscopies, HR-TEM microscopy, Cyclic Voltammetry (CV), Energy Dispersive X-ray analysis (EDX) and Thermogravimetric Analysis (TGA). This inorganic-organic hybrid material also showed dipolar interactions between its radicals which were confirmed by the appearance in the EPR spectra of an |Δms| = 2 transition at half-field. This signal gives direct evidence of the presence of a high-spin state and permitted us to study the nature of the magnetic coupling between the spins which was found to be antiferromagnetic. Self-Assembled Monolayers (SAMs) of these radicals on the Au (111) substrate were also prepared and studied by contact angle, X-Ray Photoelectron Spectroscopy (XPS), Time-of-Flight Secondary Ion Mass Spectrometry (ToF-SIMS), Cyclic Voltammetry and EPR. The magnetic as well as the electrochemical properties of the hybrid surfaces were studied and compared with the properties of this diradical in solution. Analogies between the properties of AuNPs with high coverage of radicals and those of SAM were observed.

Glyconanomaterials for biosensing applications

Nanomaterials constitute a class of structures that have unique physiochemical properties and are excellent scaffolds for presenting carbohydrates, important biomolecules that mediate a wide variety of important biological events. The fabrication of carbohydrate-presenting nanomaterials, glyconanomaterials, is of high interest and utility, combining the features of nanoscale objects with biomolecular recognition. The structures can also produce strong multivalent effects, where the nanomaterial scaffold greatly enhances the relatively weak affinities of single carbohydrate ligands to the corresponding receptors, and effectively amplifies the carbohydrate-mediated interactions. Glyconanomaterials are thus an appealing platform for biosensing applications. In this review, we discuss the chemistry for conjugation of carbohydrates to nanomaterials, summarize strategies, and tabulate examples of applying glyconanomaterials in in vitro and in vivo sensing applications of proteins, microbes, and cells. The limitations and future perspectives of these emerging glyconanomaterials sensing systems are furthermore discussed.

Novel glyconanoconjugates: synthesis, characterization and bioapplications

The impressive properties of nanoparticles (NPs) have caused them to gain considerable attention for biological applications such as cancer therapy.

Facile fabrication of glycopolymer-based iron oxide nanoparticles and their applications in the carbohydrate–lectin interaction and targeted cell imaging

A novel method for facile fabrication of glycopolymer-based iron oxide nanoparticles (GIONs) is developed.

A universal strategy for direct immobilization of intact bioactivity-conserved carbohydrates on gold nanoparticles

Carbohydrate-functioned gold nanoparticles have been highlighted for sensing complicated carbohydrates but their performance is far from ideal due to the lack of bioaffinity-conserved ways to function the particles with intact carbohydrates.

Photoconjugation of Molecularly Imprinted Polymer Nanoparticles for Surface-Enhanced Raman Detection of Propranolol

We report a simple and versatile method to covalently immobilize molecularly imprinted polymer (MIP) nanoparticles on a Raman active substrate (Klarite) using a disulfide-derivatized perfluorophenylazide (PFPA-disulfide). Gold-coated Klarite was functionalized with PFPA-disulfide via a gold-sulfur bond. Upon light radiation, the available azido groups were converted to highly reactive singlet perfluorophenyl nitrene that undergoes a CH insertion reaction and form covalent bonds with the MIP nanoparticles. The resulting surfaces were characterized using scanning electron microscopy and surface enhanced Raman spectroscopy to study the morphology and template affinity of the surfaces, respectively. The Raman measurements clearly show a dose-responsive signal when propranolol binds to the MIP surface. Because the MIP particles were covalently attached to the Raman active substrate, the sensing surface was stable and could be reused after regeneration in acetic acid solution. The MIP-based Raman sensor was used successfully to detect propranolol in urine samples (7.7 × 10(-4) M). Our results show that the high selectivity of MIPs and the fingerprint Raman identification can be integrated into a compact sensing unit using high-efficiency photoconjugation. Thus, the method proposed is reliable, efficient and fast for fabricating label-free chemical sensors.

Glyconanomaterials for Combating Bacterial Infections

Bacterial infections constitute an increasing problem to human health in response to build-up of resistance to present antibiotics and sluggish development of new pharmaceuticals. However, a means to address this problem is to pinpoint the drug delivery to-and into-the bacteria. This results in a high local concentration of the drug, circumventing the increasingly high doses otherwise necessary. Combined with other effectors, such as covalent attachment to carriers, rendering the drugs less degradable, and the combination with efflux inhibitors, old drugs can be revived. In this context, glyconanomaterials offer exceptional potential, since these materials can be tailored to accommodate different effectors. In this Concept article, we describe the different advantages of glyconanomaterials, and point to their potential in antibiotic "revitalization".

Glyconanoparticles for colorimetric bioassays

Carbohydrate molecules are involved in many of the cellular processes that are important for life. By combining the specific analyte targeting of carbohydrates with the multivalent structure and change of solution colour as a consequence of plasmonic interactions with the aggregation of metal nanoparticles, glyconanoparticles have been used extensively for the development of bioanalytical assays. The noble metals used to create the nanocore, the methodologies used to assemble the carbohydrates on the nanoparticle surface, the carbohydrate chosen for each specific target, the length of the tether that separates the carbohydrate from the nanocore and the density of carbohydrates on the surface all impact on the structural formation of metal based glyconanoparticles. This tutorial review highlights these key components, which directly impact on the selectivity and sensitivity of the developed bioassay, for the colorimetric detection of lectins, toxins and viruses.

Ionization of covalent immobilized poly(4-vinylphenol) monolayers measured by ellipsometry, QCM and SPR

Covalently immobilized poly(4-vinylphenol) (PVP) monolayer films were fabricated by spin coating PVP on perfluorophenyl azide (PFPA)-functionalized surface followed by UV irradiation. The pH-responsive behavior of these PVP ultrathin films was evaluated by ellipsometry, quartz crystal microbalance (QCM) and surface plasmon resonance (SPR). By monitoring the responses of these films to pH in situ, the ionization constant of the monolayer thin films was obtained. The apparent pKa value of these covalently immobilized PVP monolayers, 13.4 by SPR, was 3 units higher than that of the free polymer in aqueous solution.

A general method for the fabrication of graphene-nanoparticle hybrid material

We describe a simple and general approach to conjugate nanoparticles on pristine graphene. The method takes advantage of the high reactivity of perfluorophenyl nitrene towards the C[double bond, length as m-dash]C bonds in graphene, where perfluorophenyl azide-functionalized nanoparticles are conjugated to pristine graphene through the [2+1] cycloaddition reaction by a fast photoactivation.

Synthesis of multifunctional cellulose nanocrystals for lectin recognition and bacterial imaging

Multifunctional cellulose nanocrystals have been synthesized and applied as a new type of glyconanomaterial in lectin binding and bacterial imaging. The cellulose nanocrystals were prepared by TEMPO-mediated oxidation and acidic hydrolysis, followed by functionalization with a quinolone fluorophore and carbohydrate ligands. The cellulose nanocrystals were subsequently applied in interaction studies with carbohydrate-binding proteins and in bacterial imaging. The results show that the functional cellulose nanocrystals could selectively recognize the corresponding cognate lectins. In addition, mannosylated nanocrystals were shown to selectively interact with FimH-presenting E. coli, as detected by TEM and confocal fluorescence microscopy. These glyconanomaterials provide a new application of cellulose nanocrystals in biorecognition and imaging.

Colorimetric and plasmonic detection of lectins using core-shell gold glyconanoparticles prepared by copper-free click chemistry

This study describes the simple preparation of core-shell glycosyl gold nanoparticles (AuNPs) using stepwise, copper-free click chemistry-promoted self-assembly. The as-formed glyco-AuNPs can be used for the selective detection of sugar-lectin interactions, which are vital to many important physiological and pathological processes. The approach uses AuNPs as bioprobes since they produce, sensitively, changes in both color visible to the naked eye and surface plasmon resonance (SPR), on aggregation. Strain-promoted click reaction of an azido galactoside with a lipid cyclooctyne affords a galactolipid that can be embedded into polyethylene glycol (PEG)-coated AuNP via self-assembly. Subsequently, using naked-eye and plasmon resonance scattering spectroscopy, we were able to observe the colorimetric and plasmonic variations of the glyco-AuNPs, respectively, in the presence of a selective lectin over other proteins.

Glyconanomaterials: Emerging applications in biomedical research

Carbohydrates constitute the most abundant organic matter in nature, serving as structural components and energy sources, and mediating a wide range of cellular activities. The emergence of nanomaterials with distinct optical, magnetic, and electronic properties has witnessed a rapid adoption of these materials for biomedical research and applications. Nanomaterials of various shapes and sizes having large specific surface areas can be used as multivalent scaffolds to present carbohydrate ligands. The resulting glyconanomaterials effectively amplify the glycan-mediated interactions, making it possible to use these materials for sensing, imaging, diagnosis, and therapy. In this review, we summarize the synthetic strategies for the preparation of various glyconanomaterials. Examples are given where these glyconanomaterials have been used in sensing and differentiation of proteins and cells, as well as in imaging glycan-medicated cellular responses.

Multivalent recognition of concanavalin A by {Mo₁₃₂ } glyconanocapsules--toward biomimetic hybrid multilayers

Herein, we consider Müller's spherical, porous, anionic, molybdenum oxide based capsule, (NH4)42[{(Mo(VI))Mo(VI)5O21(H2O)6}12{Mo(V)2O4(CH3COO)}30]⋅10 CH3COONH4⋅300 H2O≡(NH4)42⋅1 a⋅crystal ingredients≡1, {Mo132}, as an effective sugar-decorated nanoplatform for multivalent lectin recognition. The ion-exchange of NH4(+) ions of 1 with cationic-sugars, D-mannose-ammonium chloride (2) or D-glucose-ammonium chloride (3) results in the formation of glyconanocapsules (NH4)(42-n)2n⋅1 a and (NH4)(42-m)3m⋅1 a. The Mannose (NH4)(42-n)2n⋅1 a capsules bind selectively Concanavalin A (Con A) in aqueous solution, giving an association avidity constant of K(a)(multi)=4.6×10(4) M(-1) and an enhancement factor of β=K(a)(multi)/K(ass)(mono)=21.9, reminiscent of the formation of "glycoside clusters" on the external surface of glyconanocapsule. The glyconanocapsules (NH4)(42-n)2n⋅1 a and (NH4)(42-m)3m⋅1 a self-assemble in "hybrid multilayers" by successive layer-by-layer deposition of (NH4)(42-n)2n⋅1 a or (NH4)(42-m)3m⋅1 a and Con A. These architectures, reminiscent of versatile mimics of artificial tissues, can be easily prepared and quantified by using quartz crystal microgravimetry (QCM). The "biomimetic hybrid multilayers" described here are stable under a continual water flow and they may serve as artificial networks for a greater depth of understanding of various biological mechanisms, which can directly benefit the fields of chemical separations, sensors or storage-delivery devices.

Glycan-functionalized fluorescent chitin nanocrystals for biorecognition applications

A new platform based on chitin nanocrystals has been developed for biorecognition applications. TEMPO-oxidized chitin nanocrystals (TCNs) were labeled with a fluorescent imidazoisoquinolinone dye, and simultaneously conjugated with carbohydrate ligands, resulting in dually functionalized TCNs. The biorecognition properties of the nanocrystals were probed with lectins and bacteria, resulting in selective interactions with their corresponding cognate carbohydrate-binding proteins, as visualized by optical, fluorescence, STEM, and TEM imaging. This represents a new approach to multifunctional nanomaterials based on naturally occurring polymers, holding high potential for biomedical applications.

β-Cyclodextrin-bearing gold glyconanoparticles for the development of site specific drug delivery systems

Three novel gold nanoparticles containing multiple long, flexible linkers decorated with lactose, β-cyclodextrin, and both simultaneously have been prepared. The interaction of such nanoparticles with β-d-galactose-recognizing lectins peanut agglutinin (PNA) and human galectin-3 (Gal-3) was demonstrated by UV-vis studies. Gal-3 is well-known to be overexpressed in several human tumors and can act as a biorecognizable target. This technique also allowed us to estimate their loading capability toward the anticancer drug methotrexate (MTX). Both results make these glyconanoparticles potential site-specific delivery systems for anticancer drugs.

X-Ray Photoelectron Spectroscopy Investigation of the Nitrogen Species in Photoactive Perfluorophenylazide-Modified Surfaces

X-ray Photoelectron Spectroscopy (XPS) was used to characterize the nitrogen species in perfluorophenylazide (PFPA) self-assembled monolayers. PFPA chemistry is a novel immobilization method for tailoring the surface properties of materials. It is a simple route for the efficient immobilization of graphene, proteins, carbohydrates and synthetic polymers onto a variety of surfaces. Upon light irradiation, the azido group in PFPA is converted to a highly reactive singlet nitrene species that readily undergoes CH insertion and C=C addition reactions. Here, the challenge of characterizing the PFPA modified surfaces was addressed by detailed XPS experimental analyses. The three nitrogen peaks detected in the XPS N1s spectra were assigned to amine/amide (400.5 eV) and azide (402.1 and 405.6 eV) species. The observed 2:1 ratio of the areas from the 402.1 eV to 405.6 eV peaks suggests the assignment of the peak at 402.1 eV to the two outer nitrogen atoms in the azido group and assignment of the peak at 405.6 eV to the central nitrogen atom in the azido group. The azide decomposition as the function of x-ray exposure was also determined. Finally, XPS analyses were conducted on patterned graphene to investigate the covalent bond formation between the PFPA and graphene. This study provides strong evidence for the formation of covalent bonds during the PFPA photocoupling process.

Phenylboronic-acid-modified nanoparticles: potential antiviral therapeutics

Phenylboronic-acid-modified nanoparticles (NPs) are attracting considerable attention for biological and biomedical applications. We describe here a convenient and general protocol for attaching multiple copies of para-substituted phenylboronic acid moieties onto either iron-oxide-, silica- or diamond-derived NPs. The boronic acid functionalized NPs are all fabricated by first modifying the surface of each particle type with 4-azidobenzoic ester functions. These azide-terminated nanostructures were then reacted with 4-[1-oxo-4-pentyn-1-yl) amino]phenylboronic acid units via a Cu(I) catalyzed Huisgen cycloaddition to furnish, conveniently, the corresponding boronic-acid modified NPs (or "borono-lectins") targeted in this work. The potential of these novel "borono-lectins" as antiviral inhibitors was investigated against the Hepatitis C virus (HCV) exploiting a bioassay that measures the potential of drugs to interfere with the ability of cell-culture-derived JFH1 virus particles to infect healthy hepatocytes. As far as we are aware, this is the first report that describes NP-derived viral entry inhibitors and thus serves as a "proof-of-concept" study. The novel viral entry activity demonstrated, and the fact that the described boronic-acid-functionalized NPs all display much reduced cellular toxicities compared with alternate NPs, sets the stage for their further investigation. The data supports that NP-derived borono-lectins should be pursued as a potential therapeutic strategy for blocking viral entry of HCV.

Classification of lectins by pattern recognition using glyconanoparticles

Carbohydrate-functionalized gold nanoparticles were employed to differentiate plant-legume lectins using a statistical analysis method of linear discriminant analysis (LDA). Various carbohydrates were conjugated on gold nanoparticles, and the resulting glyconanoparticles were treated with lectins. Changes in the localized surface plasmon resonance of the glyconanoparticles upon lectin binding were recorded, and the data were subjected to LDA. Results showed that the glyconanoparticles successfully differentiated all lectins.

Multilayer lectin-glyconanoparticles architectures for QCM enhanced detection of sugar-protein interaction

Multivalent biorecognition of lectin layers by glyconanoparticle sugar-clusters has been used to generate multilayer nanoplatform architectures in a QCM sensing setup.

Maltoheptaose promotes nanoparticle internalization by Escherichia coli

Nanoparticles conjugated with d-maltoheptaose (G7) showed a striking increase in the internalization by Escherichia coli. This applies to strains with and without the maltodextrin transport channel and particles ranging from a few to a hundred nanometers.