Plant chip for high-throughput phenotyping of Arabidopsis

Model-Based Analysis of Lactuca sativa Root Growth under the Action of Herbicides in Milli-Channel Arrays with In Situ Imaging

Extracting practical information from the large amounts of data gathered during the live imaging analysis of plant organs is a challenging issue. The present work investigates the use of the logistic growth model to analyze experimental data from root elongation assays performed in milli-fluidic devices with in situ imaging. Lactuca sativa was used as a bioindicator and was subjected to wide concentration ranges of four different herbicides: 2,4-D, atrazine, glyphosate, and paraquat. The model parameters were directly connected to standard indicators of toxicity and plant development, such as the LD50 and the absolute growth rate, respectively. In addition, it was found that realistic predictions of the maximum root length can be achieved about 60 h before the bioassay end point, which could significantly shorten the turnaround time. The combination of milli-fluidic devices, real-time imaging, and model-based data analysis becomes a powerful tool for environmental studies and ecotoxicity testing.

A Reproducible and Tunable Synthetic Soil Microbial Community Provides New Insights into Microbial Ecology

Microbial soil communities form commensal relationships with plants to promote the growth of both parties. The optimization of plant-microbe interactions to advance sustainable agriculture is an important field in agricultural research. However, investigation in this field is hindered by a lack of model microbial community systems and efficient approaches for building these communities. Two key challenges in developing standardized model communities are maintaining community diversity over time and storing/resuscitating these communities after cryopreservation, especially considering the different growth rates of organisms. Here, a model synthetic community (SynCom) of 16 soil microorganisms commonly found in the rhizosphere of diverse plant species, isolated from soil surrounding a single switchgrass plant, has been developed and optimized for in vitro experiments. The model soil community grows reproducibly between replicates and experiments, with a high community α-diversity being achieved through growth in low-nutrient media and through the adjustment of the starting composition ratios for the growth of individual organisms. The community can additionally be cryopreserved with glycerol, allowing for easy replication and dissemination of this in vitro system. Furthermore, the SynCom also grows reproducibly in fabricated ecosystem devices (EcoFABs), demonstrating the application of this community to an existing in vitro plant-microbe system. EcoFABs allow reproducible research in model plant systems, offering the precise control of environmental conditions and the easy measurement of plant microbe metrics. Our results demonstrate the generation of a stable and diverse microbial SynCom for the rhizosphere that can be used with EcoFAB devices and can be shared between research groups for maximum reproducibility. IMPORTANCE Microbes associate with plants in distinct soil communities to the benefit of both the soil microbes and the plants. Interactions between plants and these microbes can improve plant growth and health and are therefore a field of study in sustainable agricultural research. In this study, a model community of 16 soil bacteria has been developed to further the reproducible study of plant-soil microbe interactions. The preservation of the microbial community has been optimized for dissemination to other research settings. Overall, this work will advance soil microbe research through the optimization of a robust, reproducible model community.

Induction of embryogenic development in haploid microspore stem cells in droplet-based microfluidics

This work presents the application of droplet-based microfluidics for the cultivation of microspores from Brassica napus using the doubled haploid technology. Under stress conditions (e.g. heat shock) or by chemical induction a certain fraction of the microspores can be reprogrammed and androgenesis can be induced. This process is an important approach for plant breeding because desired plant properties can be anchored in the germline on a genetic level. However, the reprogramming rate of the microspores is generally very low, increasing it by specific stimulation is, therefore, both a necessary and challenging task. In order to accelerate the optimisation and development process, the application of droplet-based microfluidics can be a promising tool. Here, we used a tube-based microfluidic system for the generation and cultivation of microspores inside nL-droplets. Different factors like cell density, tube material and heat shock conditions were investigated to improve the yield of vital plant organoids. Evaluation and analysis of the stimuli response were done on an image base aided by an artificial intelligence cell detection algorithm. Droplet-based microfluidics allowed us to apply large concentration programs in small test volumes and to screen the best conditions for reprogramming cells by the histone deacetylase inhibitor trichostatin A and for enhancing the yield of vital microspores in droplets. An enhanced reprogramming rate was found under the heat shock conditions at 32 °C for about 3 to 6 days. In addition, the comparative experiment with MTP showed that droplet cultivation with lower cell density (<10 cells per droplet) or adding media after 3 or 6 days significantly positively affects the microspore growth and embryo rate inside 120 nL droplets. Finally, the developed embryos could be removed from the droplets and further grown into mature plants. Overall, we demonstrated that the droplet-based tube system is suitable for implementation in an automated, miniaturized system to achieve the induction of embryogenic development in haploid microspore stem cells of Brassica napus.

Nanosensor Applications in Plant Science

Plant science is a major research topic addressing some of the most important global challenges we face today, including energy and food security. Plant science has a role in the production of staple foods and materials, as well as roles in genetics research, environmental management, and the synthesis of high-value compounds such as pharmaceuticals or raw materials for energy production. Nanosensors—selective transducers with a characteristic dimension that is nanometre in scale—have emerged as important tools for monitoring biological processes such as plant signalling pathways and metabolism in ways that are non-destructive, minimally invasive, and capable of real-time analysis. A variety of nanosensors have been used to study different biological processes; for example, optical nanosensors based on Förster resonance energy transfer (FRET) have been used to study protein interactions, cell contents, and biophysical parameters, and electrochemical nanosensors have been used to detect redox reactions in plants. Nanosensor applications in plants include nutrient determination, disease assessment, and the detection of proteins, hormones, and other biological substances. The combination of nanosensor technology and plant sciences has the potential to be a powerful alliance and could support the successful delivery of the 2030 Sustainable Development Goals. However, a lack of knowledge regarding the health effects of nanomaterials and the high costs of some of the raw materials required has lessened their commercial impact.

Microfluidics as an Emerging Platform for Exploring Soil Environmental Processes: A Critical Review

Investigating environmental processes, especially those occurring in soils, calls for innovative and multidisciplinary technologies that can provide insights at the microscale. The heterogeneity, opacity, and dynamics make the soil a "black box" where interactions and processes are elusive. Recently, microfluidics has emerged as a powerful research platform and experimental tool which can create artificial soil micromodels, enabling exploring soil processes on a chip. Micro/nanofabricated microfluidic devices can mimic some of the key features of soil with highly controlled physical and chemical microenvironments at the scale of pores, aggregates, and microbes. The combination of various techniques makes microfluidics an integrated approach for observation, reaction, analysis, and characterization. In this review, we systematically summarize the emerging applications of microfluidic soil platforms, from investigating soil interfacial processes and soil microbial processes to soil analysis and high-throughput screening. We highlight how innovative microfluidic devices are used to provide new insights into soil processes, mechanisms, and effects at the microscale, which contribute to an integrated interrogation of the soil systems across different scales. Critical discussions of the practical limitations of microfluidic soil platforms and perspectives of future research directions are summarized. We envisage that microfluidics will represent the technological advances toward microscopic, controllable, and in situ soil research.

A magnetically enabled simulation of microgravity represses the auxin response during early seed germination on a microfluidic platform

For plants on Earth, the phytohormone auxin is essential for gravitropism-regulated seedling establishment and plant growth. However, little is known about auxin responses under microgravity conditions due to the lack of a tool that can provide an alteration of gravity. In this paper, a microfluidic negative magnetophoretic platform is developed to levitate Arabidopsis seeds in an equilibrium plane where the applied magnetic force compensates for gravitational acceleration. With the benefit of the microfluidic platform to simulate a microgravity environment on-chip, it is found that the auxin response is significantly repressed in levitated seeds. Simulated microgravity statistically interrupts auxin responses in embryos, even after chemical-mediated auxin alterations, illustrating that auxin is a critical factor that mediates the plant response to gravity alteration. Furthermore, pretreatment with an auxin transportation inhibitor (N-1-naphthylphthalamic acid) enables a decrease in the auxin response, which is no longer affected by simulated microgravity, demonstrating that polar auxin transportation plays a vital role in gravity-regulated auxin responses. The presented microfluidic platform provides simulated microgravity conditions in an easy-to-implement manner, helping to study and elucidate how plants correspond to diverse gravity conditions; in the future, this may be developed into a versatile tool for biological study on a variety of samples.

Screening endophyte with capability to improve phytoremediation efficiency from hyperaccumulators: A novel and efficient microfluidic method

Screening endophyte is the most important but also difficult to achieve a successful application in endophyte assisted phytoremediation process. Traditional screening procedure faced certain limitations including long time, difficulty in ascertaining the optimum strain and insignificant promotion efficiency of the selected strain in application. In this study, a novel endophyte screening method was established using microfluidic technology, realizing the real time observation of plant root phenotyping and allowing simultaneous incubation of different endophyte-plant systems. Using this method within two weeks, showed that endophyte Bacillus paramycoides (PE1), which possessed the best capability to improve phytoremediation efficiency from hyperaccumulator P. acinosa was successfully screened by evaluating root growth rate and effluent heavy metal (HM) concentration. PE1 increased root growth rate by 54.31 % and reduced the Cd concentration of chip effluent by 46.33 %. The results were verified by pot experiment, which showed that with PE1 inoculation, the biomass of P. acinosa promoted 42.50 % and Cd removal efficiency increased 55.49 %. Besides, significant and positive correlations were observed among the phytoremediation indicators obtained from microfluidic and traditional method, indicating the feasibility of microfluidic method. Our research provided a new and efficient method for endophyte screening, which could give a better understanding of endophyte assisted phytoremediation technology of HM contaminated soil.

Plant Bioelectronics and Biohybrids: The Growing Contribution of Organic Electronic and Carbon-Based Materials

Life in our planet is highly dependent on plants as they are the primary source of food, regulators of the atmosphere, and providers of a variety of materials. In this work, we review the progress on bioelectronic devices for plants and biohybrid systems based on plants, therefore discussing advancements that view plants either from a biological or a technological perspective, respectively. We give an overview on wearable and implantable bioelectronic devices for monitoring and modulating plant physiology that can be used as tools in basic plant science or find application in agriculture. Furthermore, we discuss plant-wearable devices for monitoring a plant's microenvironment that will enable optimization of growth conditions. The review then covers plant biohybrid systems where plants are an integral part of devices or are converted to devices upon functionalization with smart materials, including self-organized electronics, plant nanobionics, and energy applications. The review focuses on advancements based on organic electronic and carbon-based materials and discusses opportunities, challenges, as well as future steps.

Real-time tracking of root hair nucleus morphodynamics using a microfluidic approach

Root hairs (RHs) are tubular extensions of root epidermal cells that favour nutrient uptake and microbe interactions. RHs show a fast apical growth, constituting a unique single cell model system for analysing cellular morphodynamics. In this context, live cell imaging using microfluidics recently developed to analyze root development is appealing, although high-resolution imaging is still lacking to enable an investigation of the accurate spatiotemporal morphodynamics of organelles. Here, we provide a powerful coverslip based microfluidic device (CMD) that enables us to capture high resolution confocal imaging of Arabidopsis RH development with real-time monitoring of nuclear movement and shape changes. To validate the setup, we confirmed the typical RH growth rates and the mean nuclear positioning previously reported with classical methods. Moreover, to illustrate the possibilities offered by the CMD, we have compared the real-time variations in the circularity, area and aspect ratio of nuclei moving in growing and mature RHs. Interestingly, we observed higher aspect ratios in the nuclei of mature RHs, correlating with higher speeds of nuclear migration. This observation opens the way for further investigations of the effect of mechanical constraints on nuclear shape changes during RH growth and nuclear migration and its role in RH and plant development.

A 3D-printed Arabidopsis thaliana root imaging platform

High-resolution live imaging promises new insights into the cellular and molecular dynamics of the plant root system in response to external cues. Microfluidic platforms are valuable analytical tools that combine the precise spatial and temporal control of culture conditions with live-imaging capabilities. However, complexity in the fabrication and operations of current plant microfluidic platforms limits their use to a few technologically-focused laboratories. Here, we design and characterize an easy-to-implement 3D printed open microfluidic platform for Arabidopsis thaliana roots. Our biocompatibility study identified a suitable material for the platform production and an established drought stress assay validates the reliability of our stereolithography (SLA)-based next generation RootChip.

Platforms for High-Throughput Screening and Force Measurements on Fungi and Oomycetes

Pathogenic fungi and oomycetes give rise to a significant number of animal and plant diseases. While the spread of these pathogenic microorganisms is increasing globally, emerging resistance to antifungal drugs is making associated diseases more difficult to treat. High-throughput screening (HTS) and new developments in lab-on-a-chip (LOC) platforms promise to aid the discovery of urgently required new control strategies and anti-fungal/oomycete drugs. In this review, we summarize existing HTS and emergent LOC approaches in the context of infection strategies and invasive growth exhibited by these microorganisms. To aid this, we introduce key biological aspects and review existing HTS platforms based on both conventional and LOC techniques. We then provide an in-depth discussion of more specialized LOC platforms for force measurements on hyphae and to study electro- and chemotaxis in spores, approaches which have the potential to aid the discovery of alternative drug targets on future HTS platforms. Finally, we conclude with a brief discussion of the technical developments required to improve the uptake of these platforms into the general laboratory environment.

Current State and Future Directions of Genetics and Genomics of Endophytic Fungi for Bioprospecting Efforts

The bioprospecting of secondary metabolites from endophytic fungi received great attention in the 1990s and 2000s, when the controversy around taxol production from Taxus spp. endophytes was at its height. Since then, hundreds of reports have described the isolation and characterization of putative secondary metabolites from endophytic fungi. However, only very few studies also report the genetic basis for these phenotypic observations. With low sequencing cost and fast sample turnaround, genetics- and genomics-based approaches have risen to become comprehensive approaches to study natural products from a wide-range of organisms, especially to elucidate underlying biosynthetic pathways. However, in the field of fungal endophyte biology, elucidation of biosynthetic pathways is still a major challenge. As a relatively poorly investigated group of microorganisms, even in the light of recent efforts to sequence more fungal genomes, such as the 1000 Fungal Genomes Project at the Joint Genome Institute (JGI), the basis for bioprospecting of enzymes and pathways from endophytic fungi is still rather slim. In this review we want to discuss the current approaches and tools used to associate phenotype and genotype to elucidate biosynthetic pathways of secondary metabolites in endophytic fungi through the lens of bioprospecting. This review will point out the reported successes and shortcomings, and discuss future directions in sampling, and genetics and genomics of endophytic fungi. Identifying responsible biosynthetic genes for the numerous secondary metabolites isolated from endophytic fungi opens the opportunity to explore the genetic potential of producer strains to discover novel secondary metabolites and enhance secondary metabolite production by metabolic engineering resulting in novel and more affordable medicines and food additives.

Microfluidics in Biotechnology: Quo Vadis

The emerging technique of microfluidics offers new approaches for precisely controlling fluidic conditions on a small scale, while simultaneously facilitating data collection in both high-throughput and quantitative manners. As such, the so-called lab-on-a-chip (LOC) systems have the potential to revolutionize the field of biotechnology. But what needs to happen in order to truly integrate them into routine biotechnological applications? In this chapter, some of the most promising applications of microfluidic technology within the field of biotechnology are surveyed, and a few strategies for overcoming current challenges posed by microfluidic LOC systems are examined. In addition, we also discuss the intensifying trend (across all biotechnology fields) of using point-of-use applications which is being facilitated by new technological achievements.

Microbiome Engineering: Synthetic Biology of Plant-Associated Microbiomes in Sustainable Agriculture

To support an ever-increasing population, modern agriculture faces numerous challenges that pose major threats to global food and energy security. Plant-associated microbes, with their many plant growth-promoting (PGP) traits, have enormous potential in helping to solve these challenges. However, the results of their use in agriculture have been variable, probably because of poor colonization. Phytomicrobiome engineering is an emerging field of synthetic biology that may offer ways to alleviate this limitation. This review highlights recent advances in both bottom-up and top-down approaches to engineering non-model bacteria and microbiomes to promote beneficial plant-microbe interactions, as well as advances in strategies to evaluate these interactions. Biosafety, biosecurity, and biocontainment strategies to address the environmental concerns associated with field use of synthetic microbes are also discussed.

High-Throughput Phenotyping (HTP) Data Reveal Dosage Effect at Growth Stages in Arabidopsis thaliana Irradiated by Gamma Rays

The effects of radiation dosages on plant species are quantitatively presented as the lethal dose or the dose required for growth reduction in mutation breeding. However, lethal dose and growth reduction fail to provide dynamic growth behavior information such as growth rate after irradiation. Irradiated seeds of Arabidopsis were grown in an environmentally controlled high-throughput phenotyping (HTP) platform to capture growth images that were analyzed with machine learning algorithms. Analysis of digital phenotyping data revealed unique growth patterns following treatments below LD50 value at 641 Gy. Plants treated with 100-Gy gamma irradiation showed almost identical growth pattern compared with wild type; the hormesis effect was observed >21 days after sowing. In 200 Gy-treated plants, a uniform growth pattern but smaller rosette areas than the wild type were seen (p < 0.05). The shift between vegetative and reproductive stages was not retarded by irradiation at 200 and 300 Gy although growth inhibition was detected under the same irradiation dose. Results were validated using 200 and 300 Gy doses with HTP in a separate study. To our knowledge, this is the first study to apply a HTP platform to measure and analyze the dosage effect of radiation in plants. The method enabled an in-depth analysis of growth patterns, which could not be detected previously due to a lack of time-series data. This information will improve our knowledge about the effects of radiation in model plant species and crops.

Functional Imaging of Microbial Interactions With Tree Roots Using a Microfluidics Setup

Coupling microfluidics with microscopy has emerged as a powerful approach to study at cellular resolution the dynamics in plant physiology and root-microbe interactions (RMIs). Most devices have been designed to study the model plant Arabidopsis thaliana at higher throughput than conventional methods. However, there is a need for microfluidic devices which enable in vivo studies of root development and RMIs in woody plants. Here, we developed the RMI-chip, a simple microfluidic setup in which Populus tremuloides (aspen tree) seedlings can grow for over a month, allowing continuous microscopic observation of interactions between live roots and rhizobacteria. We find that the colonization of growing aspen roots by Pseudomonas fluorescens in the RMI-chip involves dynamic biofilm formation and dispersal, in keeping with previous observations in a different experimental set-up. Also, we find that whole-cell biosensors based on the rhizobacterium Bacillus subtilis can be used to monitor compositional changes in the rhizosphere but that the application of these biosensors is limited by their efficiency at colonizing aspen roots and persisting. These results indicate that functional imaging of dynamic root-bacteria interactions in the RMI-chip requires careful matching between the host plant and the bacterial root colonizer.

Light Gradient-Based Screening of Arabidopsis thaliana on a 384-Well Type Plant Array Chip

Arabidopsis thaliana (Arabidopsis), as a model for plant research, is widely used for various aspects of plant science. To provide a more sophisticated and microscopic environment for the germination and growth of Arabidopsis, we report a 384-well type plant array chip in which each Arabidopsis seed is independently seeded in a solid medium. The plant array chip is made of a poly(methyl methacrylate) (PMMA) acrylic material and is assembled with a home-made light gradient module to investigate the light effects that significantly affect the germination and growth of Arabidopsis. The light gradient module was used to observe the growth pattern of seedlings according to the intensity of the white light and to efficiently screen for the influence of the white light. To investigate the response to red light (600 nm), which stimulates seed germination, the light gradient module was also applied to the germination test. As a result, the germination results showed that the plant array chip can be used to simultaneously screen wild type seeds and phytochrome B mutant seeds on a single array chip according to the eight red light intensities.

A Foldable Chip Array for the Continuous Investigation of Seed Germination and the Subsequent Root Development of Seedlings

Seed germination and seedling root development are important indicators of plant development. This work designed and fabricated a foldable microfluidic chip array for conducting nondestructive and continuous evaluation of seed germination and subsequent seedling development in situ. Each plant chamber has two functional units: seed germination part and root-growth part. The root-growth parts are themselves connected to a single channel designed to provide a uniform culture medium for plant growth. The individual chips are connected into an array using elastic hinges that facilitate the folding and unfolding of the array to accommodate different viewing purposes. In the folded state, the seed germination chambers form a closely spaced array platform to facilitate the comparison of seed germination and plant development characteristics. Unfolding the array facilitates a clear examination of root development within the root-growth parts. The observation window of an individual chip facilitates either the direct examination of the developing seedling (e.g., stems and leaves) or the use of a microscope for examining microscale features (e.g., root tips and root hairs). The potential of the proposed foldable chip array as a new cultivation platform for botanic studies is demonstrated by examining the seed germination and seedling development of tobacco (Nicotiana tabacum) under different cultivation conditions.

Microfluidic tools for lipid production and modification: a review

Microfluidics has great potential as an efficient tool for a large range of applications in industry. The ability of such devices to deal with an extremely small amount of fluid has additional benefits, including superlatively fast and efficient mass and heat transfer. These characteristics of microfluidics have attracted an enormous amount of interest in their use as a novel tool for lipid production and modification. In addition, lipid resources have a close relationship with energy resources, and lipids are an alternative renewable energy source. Here, recent advances in the application of microfluidics for lipid production and modification, especially in the discovery, culturing, harvesting, separating, and monitoring of lipid-producing microorganisms, will be reviewed. Other applications of microfluidics, such as the modification of lipids from microorganisms, will also be discussed. The novel microfluidic tools in this review will be useful in applications to improve lipid production and modification in the future.

Milli-channel array for direct and quick reading of root elongation bioassays

A novel platform to perform systematic analysis and direct reading of root elongation bioassays is presented. The device was designed to include multiplexed microenvironments for the germination and growth of individual seeds, which allows observation by the naked eye or by optical systems, notably cellphone cameras. Prototypes were fabricated by laser micromachining on a highly transparent material that is fully compatible with biological systems. The effectiveness of the milli-channel array was verified against the conventional system (Petri dish). Lactuca sativa was chosen as a model species and glyphosate as a typical toxic agent. All tests were run according to standardized procedures and data analysis was carried out through different statistical indicators such as the root elongation and germination indexes. Results attained in the milli-channel array were identical to those in Petri dish, with the remarkable benefit that several steps required in the conventional system were avoided, which enormously decreases the operation time and the possibility of experimental errors. Further advantages of the milli-channel array are also reported, such as the capability to achieve live imaging of plant organs growth through a simple experiment. The developed device has been proven to be effective, versatile, easy-to-use, and integrable to cellphones, which naturally provide facilities for data recording, analysis, and networking. These improvements open the route to novel applications of bioassays in the wide field of ecotoxicology and environmental studies.

Multi-chamber petaloid root-growth chip for the non-destructive study of the development and physiology of the fibrous root system of Oryza sativa

The root system of plants is a major component of their bodies in terms of both function and bulk. The investigation of root system development is greatly assisted by microfluidic devices, which improve the spatial and temporal resolution of observations without destroying tissue. In the present study, a multi-chamber petaloid root-growth chip was developed for studying the development and physiology of root systems that have thin branching structures (i.e., fibrous root systems). The petaloid root-growth chip includes a central seed germination chamber and five root-growth chambers for observing the development of fibrous roots. The proposed device was applied for investigating the root system development of Oryza sativa. The phenotype and growth kinetics of O. sativa root systems grown in the proposed device were compared with those obtained during growth in a conventional conical flask with agar-based medium, and the results indicated that cultivation in the miniaturized device did not delay root system growth in the early stage (≤2 weeks). In addition, the transparent device enabled the non-destructive observation of the developmental and microstructural characteristics of the roots, such as the root caps, root border cells, and root hairs. Moreover, the ability to control the microenvironment in each of the five root-growth chambers individually facilitated the investigation of specific adaptations in the fibrous root growth of single O. sativa seedlings to different drought stresses. Accordingly, five polyethylene glycol (PEG)6000-induced drought stress conditions were established in the five root-growth chambers to investigate the root development of a single O. sativa seedling in the central germination chamber. In situ observations demonstrated that the different PEG6000-induced conditions affected the root growth responses and root microstructural adaptations of the single seedlings in each root-growth chamber. Therefore, the petaloid root-growth microfluidic chip can eliminate the effects of variations in different plant seeds to reveal the responses of plants to different environmental conditions more objectively while concurrently allowing for non-destructive observations at very high spatial and temporal resolution.

Tracking Root Interactions System (TRIS) Experiment and Quality Control

Soil organisms are diverse taxonomically and functionally. This ecosystem experiences highly complex networks of interactions, but may also present functionally independent entities. Plant roots, a metabolically active hotspot in the soil, take an essential part in shaping the rhizosphere. Tracking the dynamics of root-microbe interactions at high spatial resolution is currently limited due to methodological intricacy. In this study, we developed a novel microfluidics-based device enabling direct imaging of root-bacteria interactions in real time.

Multilab EcoFAB study shows highly reproducible physiology and depletion of soil metabolites by a model grass

There is a dynamic reciprocity between plants and their environment: soil physiochemical properties influence plant morphology and metabolism, and root morphology and exudates shape the environment surrounding roots. Here, we investigate the reproducibility of plant trait changes in response to three growth environments. We utilized fabricated ecosystem (EcoFAB) devices to grow the model grass Brachypodium distachyon in three distinct media across four laboratories: phosphate-sufficient and -deficient mineral media allowed assessment of the effects of phosphate starvation, and a complex, sterile soil extract represented a more natural environment with yet uncharacterized effects on plant growth and metabolism. Tissue weight and phosphate content, total root length, and root tissue and exudate metabolic profiles were consistent across laboratories and distinct between experimental treatments. Plants grown in soil extract were morphologically and metabolically distinct, with root hairs four times longer than with other growth conditions. Further, plants depleted half of the metabolites investigated from the soil extract. To interact with their environment, plants not only adapt morphology and release complex metabolite mixtures, but also selectively deplete a range of soil-derived metabolites. The EcoFABs utilized here generated high interlaboratory reproducibility, demonstrating their value in standardized investigations of plant traits.

THROUGH THE LOOKING GLASS: Real-Time Imaging in Brachypodium Roots and Osmotic Stress Analysis

To elucidate dynamic developmental processes in plants, live tissues and organs must be visualised frequently and for extended periods. The development of roots is studied at a cellular resolution not only to comprehend the basic processes fundamental to maintenance and pattern formation but also study stress tolerance adaptation in plants. Despite technological advancements, maintaining continuous access to samples and simultaneously preserving their morphological structures and physiological conditions without causing damage presents hindrances in the measurement, visualisation and analyses of growing organs including plant roots. We propose a preliminary system which integrates the optical real-time visualisation through light microscopy with a liquid culture which enables us to image at the tissue and cellular level horizontally growing Brachypodium roots every few minutes and up to 24 h. We describe a simple setup which can be used to track the growth of the root as it grows including the root tip growth and osmotic stress dynamics. We demonstrate the system's capability to scale down the PEG-mediated osmotic stress analysis and collected data on gene expression under osmotic stress.

Fabrication and use of the dual-flow-RootChip for the imaging of Arabidopsis roots in asymmetric microenvironments

This protocol provides a detailed description of how to fabricate and use the dual-flow-RootChip (dfRootChip), a novel microfluidic platform for investigating root nutrition, root-microbe interactions and signaling and development in controlled asymmetric conditions. The dfRootChip was developed primarily to investigate how plants roots interact with their environment by simulating environmental heterogeneity. The goal of this protocol is to provide a detailed resource for researchers in the biological sciences wishing to employ the dfRootChip in particular, or microfluidic devices in general, in their laboratory.

Nano-Enabled Approaches to Chemical Imaging in Biosystems

Understanding and predicting how biosystems function require knowledge about the dynamic physicochemical environments with which they interact and alter by their presence. Yet, identifying specific components, tracking the dynamics of the system, and monitoring local environmental conditions without disrupting biosystem function present significant challenges for analytical measurements. Nanomaterials, by their very size and nature, can act as probes and interfaces to biosystems and offer solutions to some of these challenges. At the nanoscale, material properties emerge that can be exploited for localizing biomolecules and making chemical measurements at cellular and subcellular scales. Here, we review advances in chemical imaging enabled by nanoscale structures, in the use of nanoparticles as chemical and environmental probes, and in the development of micro- and nanoscale fluidic devices to define and manipulate local environments and facilitate chemical measurements of complex biosystems. Integration of these nano-enabled methods will lead to an unprecedented understanding of biosystem function.

Ecosystem Fabrication (EcoFAB) Protocols for The Construction of Laboratory Ecosystems Designed to Study Plant-microbe Interactions

Beneficial plant-microbe interactions offer a sustainable biological solution with the potential to boost low-input food and bioenergy production. A better mechanistic understanding of these complex plant-microbe interactions will be crucial to improving plant production as well as performing basic ecological studies investigating plant-soil-microbe interactions. Here, a detailed description for ecosystem fabrication is presented, using widely available 3D printing technologies, to create controlled laboratory habitats (EcoFABs) for mechanistic studies of plant-microbe interactions within specific environmental conditions. Two sizes of EcoFABs are described that are suited for the investigation of microbial interactions with various plant species, including Arabidopsis thaliana, Brachypodium distachyon, and Panicum virgatum. These flow-through devices allow for controlled manipulation and sampling of root microbiomes, root chemistry as well as imaging of root morphology and microbial localization. This protocol includes the details for maintaining sterile conditions inside EcoFABs and mounting independent LED light systems onto EcoFABs. Detailed methods for addition of different forms of media, including soils, sand, and liquid growth media coupled to the characterization of these systems using imaging and metabolomics are described. Together, these systems enable dynamic and detailed investigation of plant and plant-microbial consortia including the manipulation of microbiome composition (including mutants), the monitoring of plant growth, root morphology, exudate composition, and microbial localization under controlled environmental conditions. We anticipate that these detailed protocols will serve as an important starting point for other researchers, ideally helping create standardized experimental systems for investigating plant-microbe interactions.

Dual-flow-RootChip reveals local adaptations of roots towards environmental asymmetry at the physiological and genetic levels

Roots grow in highly dynamic and heterogeneous environments. Biological activity as well as uneven nutrient availability or localized stress factors result in diverse microenvironments. Plants adapt their root morphology in response to changing environmental conditions, yet it remains largely unknown to what extent developmental adaptations are based on systemic or cell-autonomous responses. We present the dual-flow-RootChip, a microfluidic platform for asymmetric perfusion of Arabidopsis roots to investigate root-environment interactions under simulated environmental heterogeneity. Applications range from investigating physiology, root hair development and calcium signalling upon selective exposure to environmental stresses to tracing molecular uptake, performing selective drug treatments and localized inoculations with microbes. Using the dual-flow-RootChip, we revealed cell-autonomous adaption of root hair development under asymmetric phosphate (Pi) perfusion, with unexpected repression in root hair growth on the side exposed to low Pi and rapid tip-growth upregulation when Pi concentrations increased. The asymmetric root environment further resulted in an asymmetric gene expression of RSL4, a key transcriptional regulator of root hair growth. Our findings demonstrate that roots possess the capability to locally adapt to heterogeneous conditions in their environment at the physiological and transcriptional levels. Being able to generate asymmetric microenvironments for roots will help further elucidate decision-making processes in root-environment interactions.

Green light for quantitative live-cell imaging in plants

Plants exhibit an intriguing morphological and physiological plasticity that enables them to thrive in a wide range of environments. To understand the cell biological basis of this unparalleled competence, a number of methodologies have been adapted or developed over the last decades that allow minimal or non-invasive live-cell imaging in the context of tissues. Combined with the ease to generate transgenic reporter lines in specific genetic backgrounds or accessions, we are witnessing a blooming in plant cell biology. However, the imaging of plant cells entails a number of specific challenges, such as high levels of autofluorescence, light scattering that is caused by cell walls and their sensitivity to environmental conditions. Quantitative live-cell imaging in plants therefore requires adapting or developing imaging techniques, as well as mounting and incubation systems, such as micro-fluidics. Here, we discuss some of these obstacles, and review a number of selected state-of-the-art techniques, such as two-photon imaging, light sheet microscopy and variable angle epifluorescence microscopy that allow high performance and minimal invasive live-cell imaging in plants.

Microfluidic chip for automated screening of carbon dioxide conditions for microalgal cell growth

This paper reports on a microfluidic device capable of screening carbon dioxide (CO₂) conditions for microalgal cell growth. The device mainly consists of a microfluidic cell culture (MCC) unit, a gas concentration gradient generator (CGG), and an in-line cell growth optical measurement unit. The MCC unit is structured with multiple aqueous-filled cell culture channels at the top layer, multiple CO₂ flow channels at the bottom layer, and a commercial hydrophobic gas semipermeable membrane sandwiched between the two channel layers. The CGG unit provides different CO₂ concentrations to support photosynthesis of microalgae in the culture channels. The integration of the commercial gas semipermeable membrane into the cell culture device allows rapid mass transport and uniform distribution of CO₂ inside the culture medium without using conventional agitation-assisted convection methods, because the diffusion of CO₂ from the gas flow channels to the culture channels is fast over a small length scale. In addition, automated in-line monitoring of microalgal cell growth is realized via the optical measurement unit that is able to detect changes in the light intensity transmitted through the cell culture in the culture channels. The microfluidic device also allows a simple grayscale analysis method to quantify the cell growth. The utility of the system is validated by growing Chlamydomonas reinhardtii cells under different low or very-low CO₂ levels below the nominal ambient CO₂ concentration.

Plant array chip for the germination and growth screening of Arabidopsis thaliana

A screening process for the germination and growth of seed is generally required for plant research. Such a repetitive screening process is costly and time-consuming, and its bulky setup requires a lot of space. In particular, the control of the variables, such as light, nutrients, hormones and temperature, is difficult due to the limited space for incubation. In addition, small seeds such as Arabidopsis thaliana are difficult to handle as they are hundreds of microns in diameter and require a more precisely controllable screening environment. However, conventional screening methods involve the seeding of multiple seeds on a single agarose plate without physical partitions. Such methods need to be improved because they lack control over the growth environment and the results are highly dependent on the researchers. To overcome the above-mentioned limitations, a novel seeding array chip has been developed which can be filled with conventional solid agarose while enabling more efficient screening. Individual seeds can be partitioned from each other and a number of different agarose conditions can be tested in a single plant array chip. As a demonstration, we tested the effect of various concentrations of Murashige and Skoog medium and a plant hormone (e.g., abscisic acid) on the growth of Arabidopsis. The chip can efficiently save the space required for screening by providing different conditions for ∼400 seeds in a 59 × 55 mm chip, and it also provides easy observation and analysis of seed growth. The proposed plant array chip is expected to contribute to more efficient screening of essential phenotypes such as germination and growth for both academic and industrial purposes.

Imaging the Root Hair Morphology of Arabidopsis Seedlings in a Two-layer Microfluidic Platform

Root hairs increase root surface area for better water uptake and nutrient absorption by the plant. Because they are small in size and often obscured by their natural environment, root hair morphology and function are difficult to study and often excluded from plant research. In recent years, microfluidic platforms have offered a way to visualize root systems at high resolution without disturbing the roots during transfer to an imaging system. The microfluidic platform presented here builds on previous plant-on-a-chip research by incorporating a two-layer device to confine the Arabidopsis thaliana main root to the same optical plane as the root hairs. This design enables the quantification of root hairs on a cellular and organelle level and also prevents z-axis drifting during the addition of experimental treatments. We describe how to store the devices in a contained and hydrated environment, without the need for fluidic pumps, while maintaining a gnotobiotic environment for the seedling. After the optical imaging experiment, the device may be disassembled and used as a substrate for atomic force or scanning electron microscopy while keeping fine root structures intact.

Live imaging of root-bacteria interactions in a microfluidics setup

Plant roots play a dominant role in shaping the rhizosphere, the environment in which interaction with diverse microorganisms occurs. Tracking the dynamics of root-microbe interactions at high spatial resolution is currently limited because of methodological intricacy. Here, we describe a microfluidics-based approach enabling direct imaging of root-bacteria interactions in real time. The microfluidic device, which we termed tracking root interactions system (TRIS), consists of nine independent chambers that can be monitored in parallel. The principal assay reported here monitors behavior of fluorescently labeled Bacillus subtilis as it colonizes the root of Arabidopsis thaliana within the TRIS device. Our results show a distinct chemotactic behavior of B. subtilis toward a particular root segment, which we identify as the root elongation zone, followed by rapid colonization of that same segment over the first 6 h of root-bacteria interaction. Using dual inoculation experiments, we further show active exclusion of Escherichia coli cells from the root surface after B. subtilis colonization, suggesting a possible protection mechanism against root pathogens. Furthermore, we assembled a double-channel TRIS device that allows simultaneous tracking of two root systems in one chamber and performed real-time monitoring of bacterial preference between WT and mutant root genotypes. Thus, the TRIS microfluidics device provides unique insights into the microscale microbial ecology of the complex root microenvironment and is, therefore, likely to enhance the current rate of discoveries in this momentous field of research.

Microfluidic device enabled quantitative time-lapse microscopic-photography for phenotyping vegetative and reproductive phases in Fusarium virguliforme, which is pathogenic to soybean

Time-lapse microscopic-photography allows in-depth phenotyping of microorganisms. Here we report development of such a system using a microfluidic device, generated from polydimethylsiloxane and glass slide, placed on a motorized stage of a microscope for conducting time-lapse microphotography of multiple observations in 20 channels simultaneously. We have demonstrated the utility of the device in studying growth, germination and sporulation in Fusarium virguliforme that causes sudden death syndrome in soybean. To measure the growth differences, we developed a polyamine oxidase fvpo1 mutant in this fungus that fails to grow in minimal medium containing polyamines as the sole nitrogen source. Using this system, we demonstrated that the conidiospores of the pathogen take an average of five hours to germinate. During sporulation, it takes an average of 10.5 h for a conidiospore to mature and get detached from its conidiophore for the first time. Conidiospores are developed in a single conidiophore one after another. The microfluidic device enabled quantitative time-lapse microphotography reported here should be suitable for screening compounds, peptides, micro-organisms to identify fungitoxic or antimicrobial agents for controlling serious plant pathogens. The device could also be applied in identifying suitable target genes for host-induced gene silencing in pathogens for generating novel disease resistance in crop plants.

The Microphenotron: a robotic miniaturized plant phenotyping platform with diverse applications in chemical biology

BACKGROUND

Chemical genetics provides a powerful alternative to conventional genetics for understanding gene function. However, its application to plants has been limited by the lack of a technology that allows detailed phenotyping of whole-seedling development in the context of a high-throughput chemical screen. We have therefore sought to develop an automated micro-phenotyping platform that would allow both root and shoot development to be monitored under conditions where the phenotypic effects of large numbers of small molecules can be assessed.

RESULTS

The 'Microphenotron' platform uses 96-well microtitre plates to deliver chemical treatments to seedlings of Arabidopsis thaliana L. and is based around four components: (a) the 'Phytostrip', a novel seedling growth device that enables chemical treatments to be combined with the automated capture of images of developing roots and shoots; (b) an illuminated robotic platform that uses a commercially available robotic manipulator to capture images of developing shoots and roots; (c) software to control the sequence of robotic movements and integrate these with the image capture process; (d) purpose-made image analysis software for automated extraction of quantitative phenotypic data. Imaging of each plate (representing 80 separate assays) takes 4 min and can easily be performed daily for time-course studies. As currently configured, the Microphenotron has a capacity of 54 microtitre plates in a growth room footprint of 2.1 m2, giving a potential throughput of up to 4320 chemical treatments in a typical 10 days experiment. The Microphenotron has been validated by using it to screen a collection of 800 natural compounds for qualitative effects on root development and to perform a quantitative analysis of the effects of a range of concentrations of nitrate and ammonium on seedling development.

CONCLUSIONS

The Microphenotron is an automated screening platform that for the first time is able to combine large numbers of individual chemical treatments with a detailed analysis of whole-seedling development, and particularly root system development. The Microphenotron should provide a powerful new tool for chemical genetics and for wider chemical biology applications, including the development of natural and synthetic chemical products for improved agricultural sustainability.

Microfabricated tools for quantitative plant biology

The development of microfabricated devices that will provide high-throughput quantitative data and high resolution in a fast, repeatable and reproducible manner is essential for plant biology research.

Massively Parallelized Pollen Tube Guidance and Mechanical Measurements on a Lab-on-a-Chip Platform

Pollen tubes are used as a model in the study of plant morphogenesis, cellular differentiation, cell wall biochemistry, biomechanics, and intra- and intercellular signaling. For a "systems-understanding" of the bio-chemo-mechanics of tip-polarized growth in pollen tubes, the need for a versatile, experimental assay platform for quantitative data collection and analysis is critical. We introduce a Lab-on-a-Chip (LoC) concept for high-throughput pollen germination and pollen tube guidance for parallelized optical and mechanical measurements. The LoC localizes a large number of growing pollen tubes on a single plane of focus with unidirectional tip-growth, enabling high-resolution quantitative microscopy. This species-independent LoC platform can be integrated with micro-/nano-indentation systems, such as the cellular force microscope (CFM) or the atomic force microscope (AFM), allowing for rapid measurements of cell wall stiffness of growing tubes. As a demonstrative example, we show the growth and directional guidance of hundreds of lily (Lilium longiflorum) and Arabidopsis (Arabidopsis thaliana) pollen tubes on a single LoC microscopy slide. Combining the LoC with the CFM, we characterized the cell wall stiffness of lily pollen tubes. Using the stiffness statistics and finite-element-method (FEM)-based approaches, we computed an effective range of the linear elastic moduli of the cell wall spanning the variability space of physiological parameters including internal turgor, cell wall thickness, and tube diameter. We propose the LoC device as a versatile and high-throughput phenomics platform for plant reproductive and development biology using the pollen tube as a model.

A microfluidic chip for studying the reproduction of Enteromorpha prolifera

In recent years, green tides caused by water eutrophication, has brought serious environmental problems. Enteromorpha prolifera (E. prolifera), an opportunistic macroalgae, is one of the main source contributing to the formation of green tides. It has been estimated that the excessive growth of E. prolifera is closely related to various reproductive ways of germ cells which are at the micrometer scale. Here we report a microfluidic device named Germ Cell Capture Chip (GCChip) to investigate the E. prolifera reproductive mechanism. GCChip integrates the functions of algal growing, and the release, capture and selective culture of germ cells. Automatic separation and capture of germ cells on the chip allows to study germ cells' response to different stimuli. The novel device greatly facilitates long-term live-cell imaging at cellular resolution and implements the rapid and accurate exchange of growth medium without manual intervention. Results showed that the starting time of germ cell releases were earlier on the chip than that of traditional experiments with more concentrated breakout. Moreover, GCChip can be widely applied on the study of other algae. The study of algae growth process, including the elongation of somatic cell, the generation, and the release of reproductive cells, can all be improved by using this microfluidic platform.

Time-resolved NMR metabolomics of plant cells based on a microfluidic chip

The plant secondary metabolism generates numerous compounds harbouring pharmaceutical activity. In plants, these compounds are typically formed by different and specialised cell types that have to interact constituting a metabolic process chain. This interactivity impedes biotechnological production of secondary compounds, because cell differentiation is suppressed under the conditions of a batch bio-fermenter. We present a novel strategy to address this limitation using a biomimetic approach, where we simulate the situation in a real tissue by a microfluidic chamber system, where plant cells can be integrated into a process flow. We show that walled cells of the plant model tobacco BY-2 can be successfully cultivated in this system and that physiological parameters (such as cell viability, mitotic index and division synchrony) can be preserved over several days. The microfluidic design allows to resolve dynamic changes of specific metabolites over different stages of culture development. These results serve as proof-of-principle that a microfluidic organisation of cultivated plant cells can mimic the metabolic flows in a real plant tissue.

Humidity assay for studying plant-pathogen interactions in miniature controlled discrete humidity environments with good throughput

This paper reports a highly economical and accessible approach to generate different discrete relative humidity conditions in spatially separated wells of a modified multi-well plate for humidity assay of plant-pathogen interactions with good throughput. We demonstrated that a discrete humidity gradient could be formed within a few minutes and maintained over a period of a few days inside the device. The device consisted of a freeway channel in the top layer, multiple compartmented wells in the bottom layer, a water source, and a drying agent source. The combinational effects of evaporation, diffusion, and convection were synergized to establish the stable discrete humidity gradient. The device was employed to study visible and molecular disease phenotypes of soybean in responses to infection by Phytophthora sojae, an oomycete pathogen, under a set of humidity conditions, with two near-isogenic soybean lines, Williams and Williams 82, that differ for a Phytophthora resistance gene (Rps1-k). Our result showed that at 63% relative humidity, the transcript level of the defense gene GmPR1 was at minimum in the susceptible soybean line Williams and at maximal level in the resistant line Williams 82 following P. sojae CC5C infection. In addition, we investigated the effects of environmental temperature, dimensional and geometrical parameters, and other configurational factors on the ability of the device to generate miniature humidity environments. This work represents an exploratory effort to economically and efficiently manipulate humidity environments in a space-limited device and shows a great potential to facilitate humidity assay of plant seed germination and development, pathogen growth, and plant-pathogen interactions. Since the proposed device can be easily made, modified, and operated, it is believed that this present humidity manipulation technology will benefit many laboratories in the area of seed science, plant pathology, and plant-microbe biology, where humidity is an important factor that influences plant disease infection, establishment, and development.

Soil-on-a-Chip: microfluidic platforms for environmental organismal studies

Soil is the habitat of countless organisms and encompasses an enormous variety of dynamic environmental conditions. While it is evident that a thorough understanding of how organisms interact with the soil environment may have substantial ecological and economical impact, current laboratory-based methods depend on reductionist approaches that are incapable of simulating natural diversity. The application of Lab-on-a-Chip or microfluidic technologies to organismal studies is an emerging field, where the unique benefits afforded by system miniaturisation offer new opportunities for the experimentalist. Indeed, precise spatiotemporal control over the microenvironments of soil organisms in combination with high-resolution imaging has the potential to provide an unprecedented view of biological events at the single-organism or single-cell level, which in turn opens up new avenues for environmental and organismal studies. Herein we review some of the most recent and interesting developments in microfluidic technologies for the study of soil organisms and their interactions with the environment. We discuss how so-called "Soil-on-a-Chip" technology has already contributed significantly to the study of bacteria, nematodes, fungi and plants, as well as inter-organismal interactions, by advancing experimental access and environmental control. Most crucially, we highlight where distinct advantages over traditional approaches exist and where novel biological insights will ensue.

Real-time automated characterization of 3D morphology and mechanics of developing plant cells

In this article, we introduce the real-time cellular force microscope (RT-CFM), a high-throughput microrobotic platform for mechanical stimulation and characterization of single cells. We developed computer vision algorithms that fully automate the positioning of target cells and localization of the sensor tip. The control and acquisition architecture dramatically increases the accuracy, speed, and reliability of force measurements. Pollen tubes provide an ideal model system for the study of plant mechanics at the single-cell level. To quantitatively obtain the physical properties of the plant cell wall, we generated topography and stiffness measurements from 3D scans of living, growing pollen tubes. We report techniques for real-time monitoring and analysis of intracellular calcium fluxes during mechanical intervention. Our platform is compatible with various imaging systems and enables a powerful screening technology to facilitate biomechanical and morphological characterization of developing cells.

Microfluidic platforms for plant cells studies

Conventional methods of plant cell analysis rely on growing plant cells in soil pots or agarose plates, followed by screening the plant phenotypes in traditional greenhouses and growth chambers. These methods are usually costly, need a large number of experiments, suffer from low spatial resolution and disorderly growth behavior of plant cells, with lack of ability to locally and accurately manipulate the plant cells. Microfluidic platforms take advantage of miniaturization for handling small volume of liquids and providing a closed environment, with the purpose of in vitro single cell analysis and characterizing cell response to external cues. These platforms have shown their ability for high-throughput cellular analysis with increased accuracy of experiments, reduced cost and experimental times, versatility in design, ability for large-scale and combinatorial screening, and integration with other miniaturized sensors. Despite extensive research on animal cells within microfluidic environments for high-throughput sorting, manipulation and phenotyping studies, the application of microfluidics for plant cells studies has not been accomplished yet. Novel devices such as RootChip, RootArray, TipChip, and PlantChip developed for plant cells analysis, with high spatial resolution on a micrometer scale mimicking the internal microenvironment of plant cells, offering preliminary results on the capability of microfluidics to conquer the constraints of conventional methods. These devices have been used to study different aspects of plant cell biology such as gene expression, cell biomechanics, cellular mechanism of growth, cell division, and cells fusion. This review emphasizes the advantages of current microfluidic systems for plant science studies, and discusses future prospects of microfluidic platforms for characterizing plant cells response to diverse external cues.